<5>[ 0.000000] Linux version 6.14.0-rc2-xe+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Fri Feb 14 10:48:22 UTC 2025
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro earlyprintk=xdbc1,keep usbcore.autosuspend=-1
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001053fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000105400000-0x000000087f7fffff] usable
<5>[ 0.000000] xhci_dbc:early_xdbc_parse_parameter: dbgp_num: 1
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x68f86018 ESRT=0x68f97a98 MOKvar=0x6cd0c000
<6>[ 0.000000] efi: Remove mem280: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem282: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D97.2411281331 11/28/2024
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000018] MTRR map: 10 entries (3 fixed + 7 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000020] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000379] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000380] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004659] esrt: Reserving ESRT space from 0x0000000068f97a98 to 0x0000000068f97be8.
<7>[ 0.004667] e820: update [mem 0x68f97000-0x68f97fff] usable ==> reserved
<6>[ 0.004685] Using GB pages for direct mapping
<6>[ 0.005351] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[ 0.005352] printk: early log buf free: 258848(98%)
<6>[ 0.005353] Secure boot disabled
<6>[ 0.005354] ACPI: Early table checksum verification disabled
<6>[ 0.005358] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.005360] ACPI: XSDT 0x000000006FF7C228 00019C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005364] ACPI: FACP 0x000000006FFAB000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.005367] ACPI: DSDT 0x000000006FFB7000 025212 (v02 INTEL LNL 00000002 01000013)
<6>[ 0.005369] ACPI: FACS 0x000000006FEF1000 000040
<6>[ 0.005370] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.005371] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.005373] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.005374] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.005375] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.005377] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.005378] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.005379] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.005380] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.005382] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.005383] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.005384] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.005386] ACPI: SSDT 0x000000006FFE8000 002460 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.005387] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.005388] ACPI: SSDT 0x000000006FFDE000 008F36 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.005390] ACPI: SSDT 0x000000006FFDD000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.005391] ACPI: SSDT 0x000000006FFB2000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.005392] ACPI: SSDT 0x000000006FFB0000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.005393] ACPI: SSDT 0x000000006FFAC000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.005395] ACPI: HPET 0x000000006FFAA000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005396] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005397] ACPI: APIC 0x000000006FFA8000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.005398] ACPI: MCFG 0x000000006FFA7000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005400] ACPI: SSDT 0x000000006FFA6000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.005401] ACPI: SSDT 0x000000006FFA0000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.005402] ACPI: SSDT 0x000000006FF95000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.005403] ACPI: LPIT 0x000000006FF94000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005405] ACPI: SSDT 0x000000006FF93000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.005406] ACPI: SSDT 0x000000006FF92000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.005407] ACPI: DBGP 0x000000006FF91000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005408] ACPI: DBG2 0x000000006FF90000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005410] ACPI: NHLT 0x000000006FF8F000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005411] ACPI: SSDT 0x000000006FF8D000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.005412] ACPI: SSDT 0x000000006FF86000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.005414] ACPI: ECDT 0x000000006FF85000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.005415] ACPI: DMAR 0x000000006FF84000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005416] ACPI: FPDT 0x000000006FF83000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005417] ACPI: SSDT 0x000000006FF82000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.005419] ACPI: SSDT 0x000000006FF80000 001122 (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.005420] ACPI: SSDT 0x000000006FF7D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.005421] ACPI: SDEV 0x000000006FFA9000 000046 (v01 00000000 00000000)
<6>[ 0.005423] ACPI: SSDT 0x000000006FF71000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.005424] ACPI: SSDT 0x000000006FF63000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.005425] ACPI: ASF! 0x000000006FF62000 000074 (v32 INTEL LNL 00000002 01000013)
<6>[ 0.005427] ACPI: PHAT 0x000000006FF61000 0006E0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.005428] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005429] ACPI: Reserving FACP table memory at [mem 0x6ffab000-0x6ffab113]
<6>[ 0.005430] ACPI: Reserving DSDT table memory at [mem 0x6ffb7000-0x6ffdc211]
<6>[ 0.005430] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f]
<6>[ 0.005431] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.005431] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.005431] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.005431] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.005432] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.005432] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.005432] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.005433] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.005433] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.005433] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.005433] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.005434] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.005434] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea45f]
<6>[ 0.005434] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.005435] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe6f35]
<6>[ 0.005435] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0df]
<6>[ 0.005435] ACPI: Reserving SSDT table memory at [mem 0x6ffb2000-0x6ffb6ac2]
<6>[ 0.005435] ACPI: Reserving SSDT table memory at [mem 0x6ffb0000-0x6ffb140e]
<6>[ 0.005436] ACPI: Reserving SSDT table memory at [mem 0x6ffac000-0x6ffaf955]
<6>[ 0.005436] ACPI: Reserving HPET table memory at [mem 0x6ffaa000-0x6ffaa037]
<6>[ 0.005436] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.005436] ACPI: Reserving APIC table memory at [mem 0x6ffa8000-0x6ffa80d7]
<6>[ 0.005437] ACPI: Reserving MCFG table memory at [mem 0x6ffa7000-0x6ffa703b]
<6>[ 0.005437] ACPI: Reserving SSDT table memory at [mem 0x6ffa6000-0x6ffa66e2]
<6>[ 0.005437] ACPI: Reserving SSDT table memory at [mem 0x6ffa0000-0x6ffa5320]
<6>[ 0.005438] ACPI: Reserving SSDT table memory at [mem 0x6ff95000-0x6ff9f469]
<6>[ 0.005438] ACPI: Reserving LPIT table memory at [mem 0x6ff94000-0x6ff940cb]
<6>[ 0.005438] ACPI: Reserving SSDT table memory at [mem 0x6ff93000-0x6ff93d5b]
<6>[ 0.005438] ACPI: Reserving SSDT table memory at [mem 0x6ff92000-0x6ff921ef]
<6>[ 0.005439] ACPI: Reserving DBGP table memory at [mem 0x6ff91000-0x6ff91033]
<6>[ 0.005439] ACPI: Reserving DBG2 table memory at [mem 0x6ff90000-0x6ff90053]
<6>[ 0.005439] ACPI: Reserving NHLT table memory at [mem 0x6ff8f000-0x6ff8f2e2]
<6>[ 0.005440] ACPI: Reserving SSDT table memory at [mem 0x6ff8d000-0x6ff8e15b]
<6>[ 0.005440] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff8c53a]
<6>[ 0.005440] ACPI: Reserving ECDT table memory at [mem 0x6ff85000-0x6ff85068]
<6>[ 0.005440] ACPI: Reserving DMAR table memory at [mem 0x6ff84000-0x6ff840d7]
<6>[ 0.005441] ACPI: Reserving FPDT table memory at [mem 0x6ff83000-0x6ff83043]
<6>[ 0.005441] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff8286c]
<6>[ 0.005441] ACPI: Reserving SSDT table memory at [mem 0x6ff80000-0x6ff81121]
<6>[ 0.005442] ACPI: Reserving SSDT table memory at [mem 0x6ff7d000-0x6ff7f462]
<6>[ 0.005442] ACPI: Reserving SDEV table memory at [mem 0x6ffa9000-0x6ffa9045]
<6>[ 0.005442] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff7b4f9]
<6>[ 0.005443] ACPI: Reserving SSDT table memory at [mem 0x6ff63000-0x6ff70815]
<6>[ 0.005443] ACPI: Reserving ASF! table memory at [mem 0x6ff62000-0x6ff62073]
<6>[ 0.005443] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff616df]
<6>[ 0.005443] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037]
<6>[ 0.005507] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005710] No NUMA configuration found
<6>[ 0.005710] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005715] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<5>[ 5.230928] xhci_dbc:early_xdbc_setup_hardware: failed to setup the connection to host
<6>[ 5.230959] Zone ranges:
<6>[ 5.230959] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 5.230960] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 5.230961] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 5.230962] Device empty
<6>[ 5.230962] Movable zone start for each node
<6>[ 5.230963] Early memory node ranges
<6>[ 5.230963] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 5.230964] node 0: [mem 0x0000000000100000-0x000000006cac0fff]
<6>[ 5.230965] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 5.230965] node 0: [mem 0x0000000105400000-0x000000087f7fffff]
<6>[ 5.230966] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 5.230971] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 5.230988] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 5.232994] On node 0, zone DMA32: 13630 pages in unavailable ranges
<6>[ 5.261542] On node 0, zone Normal: 21504 pages in unavailable ranges
<6>[ 5.261605] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 5.262090] ACPI: PM-Timer IO Port: 0x1808
<6>[ 5.262096] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 5.262147] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 5.262149] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 5.262150] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 5.262153] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 5.262153] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 5.262165] e820: update [mem 0x68f42000-0x68f5cfff] usable ==> reserved
<6>[ 5.262171] TSC deadline timer available
<6>[ 5.262173] CPU topo: Max. logical packages: 1
<6>[ 5.262173] CPU topo: Max. logical dies: 1
<6>[ 5.262173] CPU topo: Max. dies per package: 1
<6>[ 5.262175] CPU topo: Max. threads per core: 1
<6>[ 5.262175] CPU topo: Num. cores per package: 8
<6>[ 5.262176] CPU topo: Num. threads per package: 8
<6>[ 5.262176] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 5.262188] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 5.262189] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 5.262190] PM: hibernation: Registered nosave memory: [mem 0x68f42000-0x68f5cfff]
<6>[ 5.262191] PM: hibernation: Registered nosave memory: [mem 0x68f97000-0x68f97fff]
<6>[ 5.262191] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fe67fff]
<6>[ 5.262192] PM: hibernation: Registered nosave memory: [mem 0x6fe68000-0x6ff4ffff]
<6>[ 5.262192] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 5.262193] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 5.262193] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 5.262193] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 5.262194] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 5.262194] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1053fffff]
<6>[ 5.262196] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 5.262197] Booting paravirtualized kernel on bare hardware
<6>[ 5.262198] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 5.262207] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 5.262555] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 5.262559] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 5.262561] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 5.262573] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro earlyprintk=xdbc1,keep usbcore.autosuspend=-1
<5>[ 5.262651] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 5.262665] random: crng init done
<6>[ 5.264505] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 5.265414] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 5.265470] Fallback order for Node 0: 0
<6>[ 5.265473] Built 1 zonelists, mobility grouping on. Total pages: 8285792
<6>[ 5.265473] Policy zone: Normal
<6>[ 5.265483] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[ 5.265484] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 5.265485] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 5.266417] software IO TLB: area num 8.
<4>[ 5.311619] **********************************************************
<4>[ 5.311620] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 5.311620] ** **
<4>[ 5.311621] ** This system shows unhashed kernel memory addresses **
<4>[ 5.311621] ** via the console, logs, and other interfaces. This **
<4>[ 5.311621] ** might reduce the security of your system. **
<4>[ 5.311622] ** **
<4>[ 5.311622] ** If you see this message and you are not debugging **
<4>[ 5.311622] ** the kernel, report this immediately to your system **
<4>[ 5.311622] ** administrator! **
<4>[ 5.311622] ** **
<4>[ 5.311623] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 5.311623] **********************************************************
<6>[ 5.312715] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 5.313036] ftrace: allocating 59507 entries in 233 pages
<6>[ 5.338213] ftrace: allocated 233 pages with 5 groups
<6>[ 5.339438] Dynamic Preempt: voluntary
<6>[ 5.339881] Running RCU self tests
<6>[ 5.339881] Running RCU synchronous self tests
<6>[ 5.339882] rcu: Preemptible hierarchical RCU implementation.
<6>[ 5.339882] rcu: RCU lockdep checking is enabled.
<6>[ 5.339882] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 5.339883] Trampoline variant of Tasks RCU enabled.
<6>[ 5.339883] Rude variant of Tasks RCU enabled.
<6>[ 5.339883] Tracing variant of Tasks RCU enabled.
<6>[ 5.339884] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 5.339884] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 5.339924] Running RCU synchronous self tests
<6>[ 5.339929] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 5.339932] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 5.339935] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 5.350121] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 5.350575] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 5.350915] Console: colour dummy device 80x25
<6>[ 5.350923] printk: legacy console [tty0] enabled
<6>[ 5.352106] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[ 5.352114] ... MAX_LOCKDEP_SUBCLASSES: 8
<6>[ 5.352117] ... MAX_LOCK_DEPTH: 48
<6>[ 5.352121] ... MAX_LOCKDEP_KEYS: 8192
<6>[ 5.352125] ... CLASSHASH_SIZE: 4096
<6>[ 5.352128] ... MAX_LOCKDEP_ENTRIES: 524288
<6>[ 5.352132] ... MAX_LOCKDEP_CHAINS: 524288
<6>[ 5.352136] ... CHAINHASH_SIZE: 262144
<6>[ 5.352140] memory used by lock dependency info: 54145 kB
<6>[ 5.352144] memory used for stack traces: 4224 kB
<6>[ 5.352148] per task-struct memory footprint: 1920 bytes
<6>[ 5.352197] ACPI: Core revision 20240827
<6>[ 5.353067] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 5.353131] APIC: Switch to symmetric I/O mode setup
<6>[ 5.353136] DMAR: Host address width 38
<6>[ 5.353140] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 5.353171] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 5.353204] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 5.353225] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 5.353250] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 5.353273] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[ 5.353306] DMAR: SATC flags: 0x1
<6>[ 5.353315] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 5.353320] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 5.353324] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 5.355391] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 5.360567] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 5.360585] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[ 5.360659] CPU0: Thermal monitoring enabled (TM1)
<6>[ 5.360665] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 5.360868] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 5.360872] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 5.360882] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 5.360889] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 5.360894] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 5.360901] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 5.360908] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 5.360922] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 5.360928] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 5.360933] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 5.360938] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 5.360944] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 5.360950] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 5.360955] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 5.360960] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 5.360965] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 5.361579] Freeing SMP alternatives memory: 48K
<6>[ 5.361579] pid_max: default: 32768 minimum: 301
<6>[ 5.361579] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 5.361579] landlock: Up and running.
<6>[ 5.361579] Yama: becoming mindful.
<6>[ 5.361579] AppArmor: AppArmor initialized
<6>[ 5.361579] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 5.361579] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 5.361579] Running RCU synchronous self tests
<6>[ 5.361579] Running RCU synchronous self tests
<6>[ 5.361579] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 5.361579] Running RCU Tasks wait API self tests
<6>[ 5.361579] Running RCU Tasks Rude wait API self tests
<6>[ 5.361579] Running RCU Tasks Trace wait API self tests
<6>[ 5.361579] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 5.361579] core: cpu_core PMU driver:
<6>[ 5.361579] ... version: 6
<6>[ 5.361579] ... bit width: 48
<6>[ 5.361579] ... generic registers: 10
<6>[ 5.361579] ... value mask: 0000ffffffffffff
<6>[ 5.361584] ... max period: 00007fffffffffff
<6>[ 5.361588] ... fixed-purpose events: 4
<6>[ 5.361591] ... event mask: 0001000f000003ff
<6>[ 5.361623] signal: max sigframe size: 3632
<6>[ 5.361644] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 5.361726] rcu: Hierarchical SRCU implementation.
<6>[ 5.361731] rcu: Max phase no-delay instances is 400.
<6>[ 5.362650] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 5.364472] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 5.364741] smp: Bringing up secondary CPUs ...
<6>[ 5.365089] smpboot: x86: Booting SMP configuration:
<6>[ 5.365095] .... node #0, CPUs: #1 #2
<6>[ 5.366746] Callback from call_rcu_tasks_trace() invoked.
<4>[ 5.369647] #3 #4 #5 #6 #7
<6>[ 0.010818] core: cpu_atom PMU driver:
<6>[ 0.010818] ... version: 6
<6>[ 0.010818] ... bit width: 48
<6>[ 0.010818] ... generic registers: 8
<6>[ 0.010818] ... value mask: 0000ffffffffffff
<6>[ 0.010818] ... max period: 00007fffffffffff
<6>[ 0.010818] ... fixed-purpose events: 6
<6>[ 0.010818] ... event mask: 00000077000000ff
<6>[ 5.379691] smp: Brought up 1 node, 8 CPUs
<6>[ 5.379691] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 5.381746] Memory: 32344788K/33143168K available (24498K kernel code, 5577K rwdata, 9264K rodata, 5624K init, 68412K bss, 775240K reserved, 0K cma-reserved)
<6>[ 5.383094] devtmpfs: initialized
<6>[ 5.383094] x86/mm: Memory block size: 128MB
<6>[ 5.398966] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes)
<6>[ 5.399647] Running RCU synchronous self tests
<6>[ 5.399659] Running RCU synchronous self tests
<6>[ 5.399676] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 5.399676] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 5.399914] pinctrl core: initialized pinctrl subsystem
<6>[ 5.400581] PM: RTC time: 07:23:36, date: 2025-02-15
<6>[ 5.401399] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 5.402360] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 5.402689] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 5.402970] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 5.403047] audit: initializing netlink subsys (disabled)
<5>[ 5.403086] audit: type=2000 audit(1739604216.042:1): state=initialized audit_enabled=0 res=1
<6>[ 5.404094] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 5.404096] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 5.404102] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 5.404107] thermal_sys: Registered thermal governor 'user_space'
<6>[ 5.404111] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 5.404156] EISA bus registered
<6>[ 5.404182] cpuidle: using governor ladder
<6>[ 5.404182] cpuidle: using governor menu
<6>[ 5.404597] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 5.404995] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 5.405022] PCI: Using configuration type 1 for base access
<6>[ 5.405162] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 5.406674] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 5.406674] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 5.406674] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 5.406674] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 5.425581] raid6: avx2x4 gen() 77088 MB/s
<6>[ 5.442582] raid6: avx2x2 gen() 83169 MB/s
<6>[ 5.459580] raid6: avx2x1 gen() 75269 MB/s
<6>[ 5.459584] raid6: using algorithm avx2x2 gen() 83169 MB/s
<6>[ 5.476580] raid6: .... xor() 57657 MB/s, rmw enabled
<6>[ 5.476585] raid6: using avx2x2 recovery algorithm
<6>[ 5.479935] fbcon: Taking over console
<6>[ 5.481265] ACPI: Added _OSI(Module Device)
<6>[ 5.481317] ACPI: Added _OSI(Processor Device)
<6>[ 5.481361] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 5.481405] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 5.992352] ACPI: 31 ACPI AML tables successfully acquired and loaded
<6>[ 6.016147] ACPI: EC: EC started
<6>[ 6.016177] ACPI: EC: interrupt blocked
<6>[ 6.024085] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 6.024100] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 6.123777] Callback from call_rcu_tasks() invoked.
<6>[ 6.319237] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 6.319264] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 6.363516] ACPI: Interpreter enabled
<6>[ 6.364019] ACPI: PM: (supports S0 S4 S5)
<6>[ 6.364028] ACPI: Using IOAPIC for interrupt routing
<6>[ 6.372073] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 6.372087] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 6.400251] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 6.400304] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 6.486730] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 6.487020] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 6.490225] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 6.828973] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 6.842091] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 7.002466] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 7.004086] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 7.012564] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 7.022357] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 7.022607] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 7.022853] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 7.077279] ACPI: \: Can't tag data node
<3>[ 7.078490] ACPI: \: Can't tag data node
<3>[ 7.079637] ACPI: \: Can't tag data node
<3>[ 7.080997] ACPI: \: Can't tag data node
<3>[ 7.082131] ACPI: \: Can't tag data node
<6>[ 7.268921] ACPI: \_TZ_.FN00: New power resource
<6>[ 7.269579] ACPI: \_TZ_.FN01: New power resource
<6>[ 7.270880] ACPI: \_TZ_.FN02: New power resource
<6>[ 7.271709] ACPI: \_TZ_.FN03: New power resource
<6>[ 7.272540] ACPI: \_TZ_.FN04: New power resource
<6>[ 7.276766] ACPI: \PIN_: New power resource
<6>[ 7.281280] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 7.281296] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 7.284858] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC]
<6>[ 7.296255] PCI host bridge to bus 0000:00
<6>[ 7.296288] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 7.296297] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 7.296304] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 7.296311] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 7.296319] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 7.296328] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 7.299659] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 7.300239] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 7.300330] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 7.300338] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 7.300347] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 7.300392] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 7.301783] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 7.301812] pci 0000:00:04.0: BAR 0 [mem 0x3815c00000-0x3815c1ffff 64bit]
<6>[ 7.302971] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 7.303001] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 7.303008] pci 0000:00:05.0: BAR 4 [mem 0x3815c7b000-0x3815c7bfff 64bit]
<6>[ 7.303817] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 7.303864] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 7.303876] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 7.303894] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 7.304015] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 7.304076] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 7.308369] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 7.308413] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 7.308425] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 7.308443] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 7.308559] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 7.308612] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 7.312817] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 7.312867] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 7.312878] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 7.312897] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 7.313015] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 7.313064] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 7.333561] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 7.333727] pci 0000:00:0a.0: BAR 0 [mem 0x3815c50000-0x3815c5ffff 64bit]
<6>[ 7.333768] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 7.334298] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 7.334370] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 7.334392] pci 0000:00:0b.0: BAR 4 [mem 0x3815c7a000-0x3815c7afff 64bit]
<6>[ 7.335466] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 7.335569] pci 0000:00:0d.0: BAR 0 [mem 0x3815c40000-0x3815c4ffff 64bit]
<6>[ 7.335711] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 7.340472] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 7.340578] pci 0000:00:0d.2: BAR 0 [mem 0x3815bc0000-0x3815bfffff 64bit]
<6>[ 7.340600] pci 0000:00:0d.2: BAR 2 [mem 0x3815c79000-0x3815c79fff 64bit]
<6>[ 7.340726] pci 0000:00:0d.2: supports D1 D2
<6>[ 7.340737] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 7.344621] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 7.344727] pci 0000:00:0d.3: BAR 0 [mem 0x3815b80000-0x3815bbffff 64bit]
<6>[ 7.344747] pci 0000:00:0d.3: BAR 2 [mem 0x3815c78000-0x3815c78fff 64bit]
<6>[ 7.344873] pci 0000:00:0d.3: supports D1 D2
<6>[ 7.344884] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 7.348633] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 7.348742] pci 0000:00:12.0: BAR 0 [mem 0x3815c30000-0x3815c3ffff 64bit]
<6>[ 7.348881] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 7.356323] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 7.356493] pci 0000:00:13.0: BAR 0 [mem 0x3815c77000-0x3815c77fff 64bit]
<6>[ 7.356696] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 7.358103] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 7.358209] pci 0000:00:14.0: BAR 0 [mem 0x3815c20000-0x3815c2ffff 64bit]
<6>[ 7.358349] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 7.363924] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 7.364040] pci 0000:00:14.2: BAR 0 [mem 0x3815c68000-0x3815c6ffff 64bit]
<6>[ 7.364062] pci 0000:00:14.2: BAR 2 [mem 0x3815c76000-0x3815c76fff 64bit]
<6>[ 7.364675] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.365014] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 7.367579] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.367579] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 7.372324] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.372640] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 7.377189] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.377595] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 7.381967] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 7.382348] pci 0000:00:16.0: BAR 0 [mem 0x3815c71000-0x3815c71fff 64bit]
<6>[ 7.382859] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 7.390728] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint
<6>[ 7.390807] pci 0000:00:16.3: BAR 0 [io 0x4020-0x4027]
<6>[ 7.390817] pci 0000:00:16.3: BAR 1 [mem 0x94421000-0x94421fff]
<6>[ 7.391158] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[ 7.391199] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 7.391210] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 7.391220] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 7.391385] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 7.391454] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 7.399310] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 7.399420] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 7.399462] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 7.399808] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[ 7.399972] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[ 7.404992] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 7.406427] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 7.406541] pci 0000:00:1f.3: BAR 0 [mem 0x3815b00000-0x3815b7ffff 64bit]
<6>[ 7.406556] pci 0000:00:1f.3: BAR 4 [mem 0x3815800000-0x38159fffff 64bit]
<6>[ 7.406667] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 7.407108] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 7.407173] pci 0000:00:1f.4: BAR 0 [mem 0x3815c70000-0x3815c700ff 64bit]
<6>[ 7.407185] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 7.408338] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.408522] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 7.408862] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint
<6>[ 7.408924] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[ 7.408992] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 7.410089] pci 0000:00:1f.7: [8086:a824] type 00 class 0x130000 conventional PCI endpoint
<6>[ 7.410144] pci 0000:00:1f.7: BAR 0 [mem 0x3815a00000-0x3815afffff 64bit]
<6>[ 7.410152] pci 0000:00:1f.7: BAR 2 [mem 0x3815000000-0x38157fffff 64bit]
<6>[ 7.410160] pci 0000:00:1f.7: BAR 4 [mem 0x3815c60000-0x3815c67fff 64bit]
<6>[ 7.410478] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 7.410639] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 7.410799] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 7.410987] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[ 7.411061] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff]
<6>[ 7.411072] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[ 7.411082] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[ 7.411252] pci 0000:7f:00.0: supports D1 D2
<6>[ 7.411256] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 7.411816] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 7.413665] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 7.414081] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 7.414138] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 7.414692] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 7.414751] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 7.815159] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 17.663568] Low-power S0 idle used by default for system suspend
<6>[ 17.716021] ACPI: EC: interrupt unblocked
<6>[ 17.716031] ACPI: EC: event unblocked
<6>[ 17.716066] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 17.716072] ACPI: EC: GPE=0x6e
<6>[ 17.716078] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 17.716086] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 17.716965] iommu: Default domain type: Translated
<6>[ 17.716965] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 17.718408] SCSI subsystem initialized
<7>[ 17.718635] libata version 3.00 loaded.
<6>[ 17.718733] ACPI: bus type USB registered
<6>[ 17.718806] usbcore: registered new interface driver usbfs
<6>[ 17.718838] usbcore: registered new interface driver hub
<6>[ 17.718877] usbcore: registered new device driver usb
<6>[ 17.718998] pps_core: LinuxPPS API ver. 1 registered
<6>[ 17.719002] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 17.719021] PTP clock support registered
<6>[ 17.719898] EDAC MC: Ver: 3.0.0
<6>[ 17.722032] efivars: Registered efivars operations
<6>[ 17.725348] NetLabel: Initializing
<6>[ 17.725368] NetLabel: domain hash size = 128
<6>[ 17.725380] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 17.725564] NetLabel: unlabeled traffic allowed by default
<6>[ 17.725605] mctp: management component transport protocol core
<6>[ 17.725618] NET: Registered PF_MCTP protocol family
<6>[ 17.725707] PCI: Using ACPI for IRQ routing
<7>[ 17.786884] PCI: pci_cache_line_size set to 64 bytes
<6>[ 17.787302] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 17.787609] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 17.787629] e820: reserve RAM buffer [mem 0x68f42000-0x6bffffff]
<7>[ 17.787637] e820: reserve RAM buffer [mem 0x68f97000-0x6bffffff]
<7>[ 17.787645] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff]
<7>[ 17.787653] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 17.789258] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 17.789258] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 17.789258] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6>[ 17.789258] vgaarb: loaded
<6>[ 17.789918] clocksource: Switched to clocksource tsc-early
<5>[ 17.805055] VFS: Disk quotas dquot_6.6.0
<6>[ 17.805113] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 17.807392] AppArmor: AppArmor Filesystem Enabled
<6>[ 17.807774] pnp: PnP ACPI init
<6>[ 17.809962] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 17.809995] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 17.813645] system 00:02: [io 0x06a4] has been reserved
<6>[ 17.813669] system 00:02: [io 0x06a0] has been reserved
<6>[ 17.878651] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 17.878683] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 17.878716] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 17.878739] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 17.878761] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
<6>[ 17.878787] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 17.878815] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 17.878849] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 17.887492] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 17.893979] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 17.894396] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 17.903324] pnp: PnP ACPI: found 8 devices
<6>[ 17.918449] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 17.918825] NET: Registered PF_INET protocol family
<6>[ 17.919128] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 17.922693] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 17.922988] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 17.923256] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 17.924307] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 17.926443] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 17.927120] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 17.928791] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 17.930494] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 17.930606] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 17.930624] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 17.930639] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 17.930711] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 17.930721] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 17.930730] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]: assigned
<6>[ 17.930741] pci 0000:00:15.0: BAR 0 [mem 0x3815c72000-0x3815c72fff 64bit]: assigned
<6>[ 17.930795] pci 0000:00:15.1: BAR 0 [mem 0x3815c73000-0x3815c73fff 64bit]: assigned
<6>[ 17.930884] pci 0000:00:15.2: BAR 0 [mem 0x3815c74000-0x3815c74fff 64bit]: assigned
<6>[ 17.930935] pci 0000:00:15.3: BAR 0 [mem 0x3815c75000-0x3815c75fff 64bit]: assigned
<6>[ 17.930989] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 17.931037] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 17.931050] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
<6>[ 17.931062] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 17.931074] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 17.931096] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 17.931105] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]
<6>[ 17.931117] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 17.931128] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 17.931143] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 17.931152] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]
<6>[ 17.931164] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 17.931175] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 17.931199] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 17.931207] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 17.931218] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 17.931232] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 17.931269] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 17.931310] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 17.931319] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 17.931327] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 17.931336] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 17.931345] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 17.931355] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
<6>[ 17.931362] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 17.931370] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 17.931380] pci_bus 0000:2b: resource 0 [io 0x6000-0x6fff]
<6>[ 17.931388] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 17.931396] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 17.931406] pci_bus 0000:55: resource 0 [io 0x7000-0x7fff]
<6>[ 17.931413] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 17.931421] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 17.931431] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff]
<6>[ 17.931439] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[ 17.931447] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 17.932999] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 17.935245] PCI: CLS 0 bytes, default 64
<6>[ 17.935399] DMAR: No RMRR found
<6>[ 17.935415] DMAR: No ATSR found
<6>[ 17.935421] DMAR: dmar1: Using Queued invalidation
<6>[ 17.935448] DMAR: dmar0: Using Queued invalidation
<6>[ 17.935458] DMAR: dmar2: Using Queued invalidation
<6>[ 17.936607] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 17.936710] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 17.936814] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 17.936905] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 17.941401] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 17.943137] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 17.943227] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 17.943312] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 17.943392] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 17.943507] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 17.943560] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 17.943618] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 17.943708] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 17.943805] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 17.943923] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 17.943980] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 17.944101] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 17.944158] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 17.944216] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 17.944283] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 17.944381] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 17.944445] pci 0000:00:16.3: Adding to iommu group 14
<6>[ 17.944522] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 17.944628] pci 0000:00:1c.4: Adding to iommu group 16
<6>[ 17.944771] pci 0000:00:1f.0: Adding to iommu group 17
<6>[ 17.944853] pci 0000:00:1f.3: Adding to iommu group 17
<6>[ 17.944913] pci 0000:00:1f.4: Adding to iommu group 17
<6>[ 17.944973] pci 0000:00:1f.5: Adding to iommu group 17
<6>[ 17.945036] pci 0000:00:1f.6: Adding to iommu group 17
<6>[ 17.945098] pci 0000:00:1f.7: Adding to iommu group 17
<6>[ 17.945179] pci 0000:7f:00.0: Adding to iommu group 18
<6>[ 17.945282] pci 0000:80:00.0: Adding to iommu group 19
<6>[ 17.959269] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 17.959290] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 17.959298] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB)
<6>[ 17.965236] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 17.965472] clocksource: Switched to clocksource tsc
<6>[ 17.965764] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 17.971209] Initialise system trusted keyrings
<5>[ 17.971305] Key type blacklist registered
<6>[ 17.971611] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 17.983099] zbud: loaded
<6>[ 17.984652] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 17.984884] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 17.984893] ntfs3: Read-only LZX/Xpress compression included
<5>[ 17.985454] integrity: Platform Keyring initialized
<5>[ 17.985482] integrity: Machine keyring initialized
<6>[ 17.991744] xor: automatically using best checksumming function avx
<5>[ 17.991756] Key type asymmetric registered
<5>[ 17.991771] Asymmetric key parser 'x509' registered
<6>[ 17.991931] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 17.992480] io scheduler mq-deadline registered
<6>[ 17.993590] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 17.995462] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 17.996030] pcieport 0000:00:07.0: AER: enabled with IRQ 126
<6>[ 17.997295] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 17.997824] pcieport 0000:00:07.1: AER: enabled with IRQ 127
<6>[ 17.999087] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 17.999584] pcieport 0000:00:07.2: AER: enabled with IRQ 128
<6>[ 18.000712] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 18.001223] pcieport 0000:00:1c.0: AER: enabled with IRQ 129
<6>[ 18.002882] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[ 18.003447] pcieport 0000:00:1c.4: AER: enabled with IRQ 130
<6>[ 18.004092] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 18.007179] Monitor-Mwait will be used to enter C-1 state
<7>[ 18.007324] Monitor-Mwait will be used to enter C-2 state
<7>[ 18.007379] Monitor-Mwait will be used to enter C-3 state
<6>[ 18.016523] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 18.016727] ACPI: button: Lid Switch [LID0]
<6>[ 18.016994] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 18.017164] ACPI: button: Sleep Button [SLPB]
<6>[ 18.017374] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 18.017798] ACPI: button: Power Button [PWRB]
<4>[ 18.025959] ACPI Warning: \_SB.PR00._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 18.032372] ACPI Warning: \_SB.PR01._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 18.045440] ACPI Warning: \_SB.PR02._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 18.058172] ACPI Warning: \_SB.PR03._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 18.072726] ACPI Warning: \_SB.PR04._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 18.080851] ACPI Warning: \_SB.PR05._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 18.088182] ACPI Warning: \_SB.PR06._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 18.095430] ACPI Warning: \_SB.PR07._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<6>[ 18.172640] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 18.172658] ACPI: thermal: Thermal Zone [TZ00] (52 C)
<6>[ 18.174085] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 18.174137] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 18.175147] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 18.197206] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 18.210667] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[ 18.212422] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[ 18.235372] 0000:00:16.3: ttyS4 at I/O 0x4020 (irq = 19, base_baud = 115200) is a 16550A
<4>[ 18.237443] hpet_acpi_add: no address or irqs in _CRS
<6>[ 18.237714] Linux agpgart interface v0.103
<6>[ 18.238639] ACPI: bus type drm_connector registered
<6>[ 18.260745] loop: module loaded
<6>[ 18.307907] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 18.438236] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 18.585947] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 18.792899] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[ 18.906683] Key type psk registered
<6>[ 18.911561] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[ 18.912204] nvme nvme0: pci function 0000:80:00.0
<6>[ 18.912397] tun: Universal TUN/TAP device driver, 1.6
<6>[ 18.913167] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 18.913294] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 18.915291] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 18.917853] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 18.917877] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 18.917898] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 18.918393] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 18.918408] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 18.918414] usb usb1: Product: xHCI Host Controller
<6>[ 18.918418] usb usb1: Manufacturer: Linux 6.14.0-rc2-xe+ xhci-hcd
<6>[ 18.918423] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 18.919558] hub 1-0:1.0: USB hub found
<6>[ 18.919616] hub 1-0:1.0: 1 port detected
<6>[ 18.921874] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 18.921883] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 18.921889] usb usb2: Product: xHCI Host Controller
<6>[ 18.921893] usb usb2: Manufacturer: Linux 6.14.0-rc2-xe+ xhci-hcd
<6>[ 18.921898] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 18.922447] hub 2-0:1.0: USB hub found
<6>[ 18.922478] hub 2-0:1.0: 3 ports detected
<6>[ 18.937445] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 18.937465] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 18.939021] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 18.939980] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 18.939992] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 18.940005] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 18.940119] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 18.940126] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 18.940133] usb usb3: Product: xHCI Host Controller
<6>[ 18.940137] usb usb3: Manufacturer: Linux 6.14.0-rc2-xe+ xhci-hcd
<6>[ 18.940142] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 18.943369] hub 3-0:1.0: USB hub found
<6>[ 18.944060] hub 3-0:1.0: 8 ports detected
<6>[ 18.954595] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 18.965774] nvme0n1: p1 p2
<6>[ 19.003253] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 19.003281] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 19.003299] usb usb4: Product: xHCI Host Controller
<6>[ 19.003311] usb usb4: Manufacturer: Linux 6.14.0-rc2-xe+ xhci-hcd
<6>[ 19.003326] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 19.006924] hub 4-0:1.0: USB hub found
<6>[ 19.007276] hub 4-0:1.0: 2 ports detected
<6>[ 19.015507] usbcore: registered new interface driver usb-storage
<6>[ 19.015701] usbcore: registered new interface driver usbserial_generic
<6>[ 19.015869] usbserial: USB Serial support registered for generic
<6>[ 19.015935] usbcore: registered new interface driver ftdi_sio
<6>[ 19.016000] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 19.016068] usbcore: registered new interface driver pl2303
<6>[ 19.016118] usbserial: USB Serial support registered for pl2303
<6>[ 19.016290] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 19.016301] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[ 19.724834] i8042: Can't read CTR while initializing i8042
<3>[ 19.724846] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 19.725340] mousedev: PS/2 mouse device common for all mice
<6>[ 19.726249] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 19.728875] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 19.729096] rtc_cmos rtc_cmos: setting system clock to 2025-02-15T07:23:50 UTC (1739604230)
<6>[ 19.729277] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 19.729329] i2c_dev: i2c /dev entries driver
<6>[ 19.735948] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 19.735964] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 19.735974] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 19.736031] device-mapper: uevent: version 1.0.3
<6>[ 19.736516] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[ 19.736682] platform eisa.0: Probing EISA bus 0
<4>[ 19.736696] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 19.736710] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 19.736724] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 19.736736] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 19.736748] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 19.736760] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 19.736773] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 19.736785] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 19.736798] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 19.736807] platform eisa.0: EISA: Detected 0 cards
<6>[ 19.736817] intel_pstate: Intel P-state driver initializing
<6>[ 19.740954] Hybrid CPU capacity scaling enabled
<6>[ 19.742461] intel_pstate: HWP enabled
<6>[ 19.742470] sdhci: Secure Digital Host Controller Interface driver
<6>[ 19.742478] sdhci: Copyright(c) Pierre Ossman
<6>[ 19.742620] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 19.745319] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[ 19.746513] drop_monitor: Initializing network drop monitor service
<6>[ 19.746860] NET: Registered PF_INET6 protocol family
<6>[ 19.751688] Segment Routing with IPv6
<6>[ 19.751751] In-situ OAM (IOAM) with IPv6
<6>[ 19.751814] NET: Registered PF_PACKET protocol family
<5>[ 19.752057] Key type dns_resolver registered
<4>[ 19.757134] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 19.757804] microcode: Current revision: 0x0000011b
<6>[ 19.758869] IPI shorthand broadcast: enabled
<6>[ 19.777020] sched_clock: Marking stable (19767000684, 9818274)->(19847872453, -71053495)
<6>[ 19.777903] registered taskstats version 1
<5>[ 19.779395] Loading compiled-in X.509 certificates
<6>[ 19.807069] Demotion targets for Node 0: null
<6>[ 19.807299] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<4>[ 19.807307] ------------[ cut here ]------------
<4>[ 19.807311] Debug warning: early ioremap leak of 1 areas detected.
please boot with early_ioremap_debug and report the dmesg.
<6>[ 19.807314] kmemleak: Automatic memory scanning thread started
<4>[ 19.807326] WARNING: CPU: 0 PID: 1 at mm/early_ioremap.c:90 check_early_ioremap_leak+0x51/0x80
<4>[ 19.807337] Modules linked in:
<4>[ 19.807342] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc2-xe+ #1
<4>[ 19.807348] Hardware name: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D97.2411281331 11/28/2024
<4>[ 19.807357] RIP: 0010:check_early_ioremap_leak+0x51/0x80
<4>[ 19.807362] Code: 48 83 c3 01 48 83 fb 08 75 e1 85 c0 75 0e 48 8b 5d f8 c9 31 f6 31 ff c3 cc cc cc cc 89 c6 48 c7 c7 b8 fb ea 82 e8 ff d3 b6 fd <0f> 0b b8 01 00 00 00 48 8b 5d f8 c9 31 f6 31 ff c3 cc cc cc cc 48
<4>[ 19.807373] RSP: 0000:ffffc900000f7dc0 EFLAGS: 00010246
<4>[ 19.807378] RAX: 0000000000000000 RBX: 0000000000000008 RCX: 0000000000000000
<4>[ 19.807383] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
<4>[ 19.807388] RBP: ffffc900000f7dd0 R08: 0000000000000000 R09: 0000000000000000
<4>[ 19.807393] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
<4>[ 19.807398] R13: ffffffff83acf2f4 R14: ffffc900000f7de0 R15: 000000000003828c
<4>[ 19.807403] FS: 0000000000000000(0000) GS:ffff88885f200000(0000) knlGS:0000000000000000
<4>[ 19.807409] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 19.807413] CR2: ffff88887f7ff000 CR3: 0000000003248001 CR4: 0000000000f70ef0
<4>[ 19.807419] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
<4>[ 19.807424] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
<4>[ 19.807429] PKRU: 55555554
<4>[ 19.807432] Call Trace:
<4>[ 19.807434] <TASK>
<4>[ 19.807438] ? show_regs+0x6c/0x80
<4>[ 19.807444] ? __warn+0x93/0x1c0
<4>[ 19.807448] ? check_early_ioremap_leak+0x51/0x80
<4>[ 19.807453] ? report_bug+0x182/0x1b0
<4>[ 19.807459] ? handle_bug+0x6e/0xb0
<4>[ 19.807464] ? exc_invalid_op+0x18/0x80
<4>[ 19.807468] ? asm_exc_invalid_op+0x1b/0x20
<4>[ 19.807475] ? check_early_ioremap_leak+0x51/0x80
<4>[ 19.807479] ? __pfx_check_early_ioremap_leak+0x10/0x10
<4>[ 19.807483] ? __pfx_check_early_ioremap_leak+0x10/0x10
<4>[ 19.807488] do_one_initcall+0x76/0x400
<4>[ 19.807495] kernel_init_freeable+0x3da/0x6a0
<4>[ 19.807502] ? __pfx_kernel_init+0x10/0x10
<4>[ 19.807507] kernel_init+0x1b/0x200
<4>[ 19.807511] ret_from_fork+0x44/0x70
<4>[ 19.807515] ? __pfx_kernel_init+0x10/0x10
<4>[ 19.807520] ret_from_fork_asm+0x1a/0x30
<4>[ 19.807527] </TASK>
<4>[ 19.807529] irq event stamp: 83293721
<4>[ 19.807532] hardirqs last enabled at (83293729): [<ffffffff814a4d09>] __up_console_sem+0x79/0xa0
<4>[ 19.807540] hardirqs last disabled at (83293736): [<ffffffff814a4cee>] __up_console_sem+0x5e/0xa0
<4>[ 19.807546] softirqs last enabled at (83278900): [<ffffffff813d3fbf>] __irq_exit_rcu+0x13f/0x160
<4>[ 19.807553] softirqs last disabled at (83278879): [<ffffffff813d3fbf>] __irq_exit_rcu+0x13f/0x160
<4>[ 19.807560] ---[ end trace 0000000000000000 ]---
<5>[ 19.807751] Key type .fscrypt registered
<5>[ 19.807755] Key type fscrypt-provisioning registered
<6>[ 19.810421] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 19.812636] Key type encrypted registered
<6>[ 19.812643] AppArmor: AppArmor sha256 policy hashing enabled
<6>[ 19.812817] ima: No TPM chip found, activating TPM-bypass!
<5>[ 19.812833] Loading compiled-in module X.509 certificates
<5>[ 19.813607] Loaded X.509 cert 'Build time autogenerated kernel key: 86b66a3c1f4ee486db7ddb8e4db9ece0e11b1067'
<6>[ 19.813621] ima: Allocated hash algorithm: sha256
<6>[ 19.813664] ima: No architecture policies found
<6>[ 19.813761] evm: Initialising EVM extended attributes:
<6>[ 19.813766] evm: security.selinux
<6>[ 19.813769] evm: security.SMACK64
<6>[ 19.813772] evm: security.SMACK64EXEC
<6>[ 19.813775] evm: security.SMACK64TRANSMUTE
<6>[ 19.813778] evm: security.SMACK64MMAP
<6>[ 19.813781] evm: security.apparmor
<6>[ 19.813783] evm: security.ima
<6>[ 19.813786] evm: security.capability
<6>[ 19.813789] evm: HMAC attrs: 0x1
<6>[ 19.815783] PM: Magic number: 13:664:369
<6>[ 19.815851] acpi ACPI0007:23: hash matches
<6>[ 19.816009] printk: legacy console [netcon0] enabled
<6>[ 19.816015] netconsole: network logging started
<6>[ 19.816559] RAS: Correctable Errors collector initialized.
<6>[ 19.816683] clk: Disabling unused clocks
<6>[ 19.816692] PM: genpd: Disabling unused power domains
<6>[ 19.817208] md: Waiting for all devices to be available before autodetect
<6>[ 19.817215] md: If you don't use raid, use raid=noautodetect
<6>[ 19.817220] md: Autodetecting RAID arrays.
<6>[ 19.817229] md: autorun ...
<6>[ 19.817232] md: ... autorun DONE.
<6>[ 19.858770] EXT4-fs (nvme0n1p2): mounted filesystem d94563f3-71a5-4472-983a-b9d25270145b ro with ordered data mode. Quota mode: none.
<6>[ 19.858835] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 19.859344] devtmpfs: mounted
<6>[ 19.871054] Freeing unused decrypted memory: 2028K
<6>[ 19.872610] Freeing unused kernel image (initmem) memory: 5624K
<6>[ 19.872633] Write protecting the kernel read-only data: 34816k
<6>[ 19.872959] Freeing unused kernel image (text/rodata gap) memory: 76K
<6>[ 19.873224] Freeing unused kernel image (rodata/data gap) memory: 976K
<6>[ 19.877898] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 19.877922] Run /sbin/init as init process
<7>[ 19.877926] with arguments:
<7>[ 19.877927] /sbin/init
<7>[ 19.877928] with environment:
<7>[ 19.877929] HOME=/
<7>[ 19.877929] TERM=linux
<7>[ 19.877930] BOOT_IMAGE=/boot/drm_intel
<7>[ 19.923679] systemd[1]: Inserted module 'autofs4'
<7>[ 19.942090] systemd[1]: systemd 255.4-1ubuntu8.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 19.942135] systemd[1]: Detected architecture x86-64.
<7>[ 19.943170] systemd[1]: Hostname set to <shard-lnl-6>.
<7>[ 20.118722] systemd[1]: Configuration file /run/systemd/system/systemd-networkd-wait-online.service.d/10-netplan.conf is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 20.119305] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 20.181424] systemd[1]: Queued start job for default target graphical.target.
<7>[ 20.218632] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 20.222885] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 20.226021] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 20.226475] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 20.227530] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 20.227733] systemd[1]: Expecting device dev-disk-by\x2duuid-BBCC\x2dD8CD.device - /dev/disk/by-uuid/BBCC-D8CD...
<7>[ 20.227979] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 20.228111] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 20.228214] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 20.228314] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 20.228418] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 20.228780] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 20.229888] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 20.230247] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 20.230621] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 20.230917] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 20.231135] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 20.231426] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 20.231737] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 20.232049] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 20.232234] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 20.232511] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 20.232758] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 20.257592] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 20.263308] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 20.267379] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 20.270549] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 20.275711] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 20.281164] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 20.285287] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 20.288341] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 20.290917] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 20.294488] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 20.297566] systemd-journald[211]: Collecting audit messages is disabled.
<7>[ 20.297616] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 20.300702] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 20.305663] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 20.312545] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 20.317603] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 20.317977] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<6>[ 20.323362] pstore: Using crash dump compression: deflate
<7>[ 20.324511] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[ 20.325730] pstore: Registered efi_pstore as persistent store backend
<7>[ 20.329144] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 20.329324] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 20.329407] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 20.333364] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<6>[ 20.334141] fuse: init (API version 7.42)
<7>[ 20.339844] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 20.482746] EXT4-fs (nvme0n1p2): re-mounted d94563f3-71a5-4472-983a-b9d25270145b r/w. Quota mode: none.
<6>[ 20.520952] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:306577408k SS
<7>[ 20.543888] systemd-journald[211]: Received client request to flush runtime journal.
<7>[ 20.561741] systemd-journald[211]: /var/log/journal/969c3e4a3b0c44bb886902ddd4fce94a/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 20.561758] systemd-journald[211]: Rotating system journal.
<4>[ 21.232163] nvme nvme0: using unchecked data buffer
<6>[ 21.349321] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<6>[ 21.423714] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<6>[ 21.442115] intel-hid INTC107B:00: platform supports 5 button array
<6>[ 21.449937] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<6>[ 21.470222] pci 0000:00:05.0: Setting to D3hot
<6>[ 21.481871] pci 0000:00:0b.0: Setting to D3hot
<4>[ 21.493921] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 21.494207] intel_pmc_core INT33A1:00: initialized
<5>[ 21.580762] audit: type=1400 audit(1739604232.349:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=426 comm="apparmor_parser"
<5>[ 21.581148] audit: type=1400 audit(1739604232.350:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=428 comm="apparmor_parser"
<5>[ 21.581329] audit: type=1400 audit(1739604232.350:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=427 comm="apparmor_parser"
<5>[ 21.583842] audit: type=1400 audit(1739604232.352:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=429 comm="apparmor_parser"
<5>[ 21.603641] audit: type=1400 audit(1739604232.372:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=431 comm="apparmor_parser"
<5>[ 21.604032] audit: type=1400 audit(1739604232.373:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=432 comm="apparmor_parser"
<3>[ 21.609304] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<5>[ 21.615178] audit: type=1400 audit(1739604232.384:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=433 comm="apparmor_parser"
<5>[ 21.615596] audit: type=1400 audit(1739604232.384:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=434 comm="apparmor_parser"
<5>[ 21.616719] audit: type=1400 audit(1739604232.385:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-run" pid=437 comm="apparmor_parser"
<5>[ 21.617576] audit: type=1400 audit(1739604232.386:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chrome" pid=438 comm="apparmor_parser"
<3>[ 21.629513] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<6>[ 21.859192] ACPI: bus type thunderbolt registered
<6>[ 21.896622] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 21.918349] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 21.936057] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 21.960794] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 21.962793] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[ 21.964694] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[ 21.964698] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[ 21.967761] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 21.981926] intel_rapl_common: Found RAPL domain package
<6>[ 21.981938] intel_rapl_common: Found RAPL domain dram
<6>[ 21.990087] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 21.996654] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 21.996658] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 21.996763] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 21.999092] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 22.018135] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 22.177166] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
<6>[ 22.177171] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 22.177172] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 22.177173] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 22.177174] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
<6>[ 22.177174] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 22.178671] cryptd: max_cpu_qlen set to 1000
<6>[ 22.180892] AES CTR mode by8 optimization enabled
<6>[ 22.289913] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c9:15:be, XID 541, IRQ 175
<6>[ 22.289919] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[ 22.331335] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 22.485083] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[ 22.605953] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[ 22.633980] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[ 22.633985] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[ 22.633987] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<6>[ 22.645229] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:35:92
<6>[ 22.645234] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[ 22.645345] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<4>[ 22.785763] block nvme0n1: No UUID available providing old NGUID
<6>[ 22.969221] intel_rapl_common: Found RAPL domain package
<6>[ 22.969227] intel_rapl_common: Found RAPL domain core
<6>[ 22.969230] intel_rapl_common: Found RAPL domain uncore
<6>[ 22.969232] intel_rapl_common: Found RAPL domain dram
<6>[ 22.969233] intel_rapl_common: Found RAPL domain psys
<6>[ 23.065216] evm: overlay not supported
<6>[ 23.167945] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<6>[ 23.172460] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<4>[ 23.206212] spi-nor spi0.0: supply vcc not found, using dummy regulator
<5>[ 23.218887] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 23.218908] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 23.274949] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[ 23.440618] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[ 23.632612] hid: raw HID events driver (C) Jiri Kosina
<6>[ 23.641407] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 23.674583] loop0: detected capacity change from 0 to 8
<6>[ 23.685553] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 23.687497] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 23.689401] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 23.690321] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 23.692178] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 23.693013] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 23.700546] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 23.705493] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 23.710340] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 23.713748] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 23.717361] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 23.720522] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 24.422308] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 24.422349] typec port0: bound usb2-port1 (ops connector_ops)
<6>[ 25.453189] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 25.453225] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 27.017816] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<7>[ 31.127634] systemd-journald[211]: /var/log/journal/969c3e4a3b0c44bb886902ddd4fce94a/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 50.862504] [IGT] xe_module_load: executing
<7>[ 50.877961] [IGT] xe_module_load: starting subtest load
<6>[ 51.058534] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 51.060234] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[ 51.060242] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG / Xe2_HPG / Xe3_LPG (20.04) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 51.060329] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 51.060409] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 51.066988] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 51.070884] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 51.070986] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 51.071067] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 51.071140] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 51.071205] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 51.071266] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 51.071326] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 51.071385] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 51.071441] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 51.071496] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 51.071550] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 51.071604] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 51.071656] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 51.071709] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 51.071761] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 51.071882] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 51.073111] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 51.077897] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000086 [0x43/00]
<7>[ 51.078038] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 51.080883] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 51.081763] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 51.081900] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 51.082025] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,0000007f
<7>[ 51.082113] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,0000007f
<7>[ 51.082196] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 51.082277] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 51.082357] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 51.083005] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 51.087125] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 51.087234] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 51.087324] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 51.087408] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 51.087477] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 51.087545] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 51.087610] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 51.087676] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 51.087740] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 51.087803] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 51.087891] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 51.087954] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 51.088015] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 51.088076] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 51.089707] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 51.092204] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1263
<6>[ 51.093276] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 51.093414] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 51.093602] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 51.095408] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 51.095574] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 51.114875] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 51.115341] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 51.115545] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 51.115736] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 51.115941] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 51.116149] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 51.116329] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 51.116494] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 51.117237] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 51.117584] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[ 51.117894] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7>[ 51.118203] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 51.118490] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 51.118725] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 51.118976] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 51.119206] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 51.119470] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 51.119733] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 51.120026] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 51.120290] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 51.120560] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 51.120857] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 51.121144] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 51.121394] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 51.121636] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 51.121885] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 51.122164] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.122390] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.122609] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 51.122837] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.123051] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.123289] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.123498] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 51.123704] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.123909] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.124086] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.124261] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 51.124438] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.124635] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.124817] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.125050] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 51.125218] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.125383] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.125545] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.125703] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 51.125859] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.126020] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.126174] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.126311] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 51.127016] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 51.127229] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 51.127432] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 51.127630] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 51.127835] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 51.128027] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 51.128217] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 51.128400] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 51.128617] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 51.128820] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 51.129042] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 51.129223] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 51.129438] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 51.129633] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 51.129820] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 51.130040] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 51.130234] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 51.130427] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 51.130621] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 51.130841] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 51.131102] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 51.131318] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 51.131581] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 51.131801] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 51.132043] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 51.132304] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 51.132511] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 51.132719] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 51.133031] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 51.133409] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 51.133715] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 51.134112] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 51.134458] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 51.134781] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 51.135132] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 51.135394] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 51.135692] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 51.135975] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=mem
<7>[ 51.136025] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 51.136354] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 51.136598] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 51.136842] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 51.137706] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 51.138015] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 51.140217] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 51.140412] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 51.140587] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 51.140755] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 51.140939] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 51.141094] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7>[ 51.141249] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 51.141398] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 51.141540] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 51.141533] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 51.141680] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 51.141717] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 51.141811] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 51.141882] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 9 (9.0 usec)
<7>[ 51.141952] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 51.142007] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 103 (103.0 usec)
<7>[ 51.142069] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 51.142127] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 103 (103.0 usec)
<7>[ 51.142182] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7>[ 51.142239] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 103 (103.0 usec)
<7>[ 51.142297] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 51.142349] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 96 (96.0 usec)
<7>[ 51.142405] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 51.142457] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 103 (103.0 usec)
<7>[ 51.142508] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 51.142609] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 51.142707] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 51.142805] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 51.142913] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 51.143004] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7>[ 51.143099] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 51.143187] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 51.143273] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 51.143357] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 51.143444] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 51.143535] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 51.143624] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 51.143711] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<7>[ 51.149776] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<6>[ 51.154618] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7>[ 51.154831] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 51.155110] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 51.155340] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[ 51.155610] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 51.155903] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[ 51.156397] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 51.156630] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 51.156861] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 51.157087] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 51.157293] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 51.157494] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 51.157692] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 51.157901] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 51.158099] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 51.158474] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 51.158729] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 51.158957] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 51.159159] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 51.159355] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 51.159546] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 51.159771] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 51.160087] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 51.161620] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 51.161878] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[ 51.164516] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 51.165223] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 51.166189] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e
<7>[ 51.168211] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 51.168912] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 51.171605] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 51.182079] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 51.182098] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.182101] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.182103] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 51.182108] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.182111] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 51.182119] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.182122] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 51.182126] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.182195] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.182198] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.182200] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.182214] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.182856] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[ 51.183501] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 51.183669] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[ 51.183894] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 51.184105] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 51.184382] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 51.184561] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 51.184725] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 51.184815] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 51.184908] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 51.185024] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 51.185297] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 51.185514] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 51.185663] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 51.186138] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 51.186275] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 51.186398] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 51.186691] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 51.186838] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 51.186966] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 51.187529] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 51.187674] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 51.187804] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 51.187906] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 51.187996] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 51.188083] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 51.188166] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 51.188250] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 51.188334] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 51.188417] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 51.188500] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 51.188583] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 51.188665] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 51.188747] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 51.188834] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 51.188915] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 51.188996] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 51.189076] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 51.189156] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 51.189236] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 51.189315] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 51.190119] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 51.190243] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 51.190352] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 51.190451] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 51.190539] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[ 51.190622] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[ 51.190704] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[ 51.190789] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 51.190883] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 51.190967] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[ 51.191047] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[ 51.191125] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[ 51.191208] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 51.191293] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 51.191376] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[ 51.191455] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[ 51.191532] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[ 51.191645] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[ 51.191731] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[ 51.191813] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[ 51.191902] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[ 51.192217] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[ 51.192301] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 51.192378] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 51.192454] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 51.192529] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 51.192604] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 51.192680] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 51.192797] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 51.192888] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 51.192969] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 51.193046] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 51.193122] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 51.193197] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 51.193272] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7>[ 51.193387] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 51.193472] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 51.193551] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 51.193628] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 51.193704] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 51.193780] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 51.193860] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7>[ 51.194017] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[ 51.194130] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A
<7>[ 51.194352] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 51.194462] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 51.194564] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 51.194660] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 51.194754] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 51.194853] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 51.194945] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 51.195037] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 51.195128] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 51.195217] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 51.195306] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 51.195395] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 51.195484] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 51.195572] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 51.195661] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 51.195749] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0
<7>[ 51.195842] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96
<7>[ 51.195932] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906
<7>[ 51.196020] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.196108] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.196195] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.196284] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.196370] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.196457] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 51.196543] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 51.196628] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 51.196714] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 51.196800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 51.196891] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 51.196978] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 51.197065] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 51.197150] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.197236] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.197320] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.197406] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.197491] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.197576] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.197661] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.197747] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.197840] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.197926] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.198012] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 51.198099] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 51.198336] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 51.198438] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 51.198532] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 51.198879] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 51.198976] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[ 51.216091] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<7>[ 51.288023] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<6>[ 51.431574] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 51.431577] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 51.431579] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 51.431650] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[ 51.431748] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 51.431853] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 51.431936] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 51.432045] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[ 51.432170] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[ 51.432284] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[ 51.432356] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 51.432423] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 51.432494] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 51.433471] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 51.433539] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 51.433610] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 51.433677] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 51.433742] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 51.433806] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 51.433879] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 51.433947] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 51.434022] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 51.434096] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 51.434171] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 51.434239] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 51.434303] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 51.434362] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 51.434420] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 51.434476] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 51.434532] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 51.434587] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 51.434640] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 51.434692] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 51.434745] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 51.434796] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 51.434857] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 51.434908] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 51.434967] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 51.435028] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 51.435101] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 51.435174] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 51.435240] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[ 51.435298] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[ 51.435354] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[ 51.435411] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 51.435468] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 51.435523] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 51.435577] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 51.435632] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 51.435690] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 51.435747] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 51.436170] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 51.436239] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 51.436293] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 51.436472] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 51.436526] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 51.436577] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 51.436760] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 51.436809] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7>[ 51.436872] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 51.436932] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[ 51.436990] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[ 51.437048] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[ 51.437550] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 51.437734] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[ 51.437796] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[ 51.437864] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 51.437926] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 51.437984] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 51.438042] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 51.438101] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 51.438159] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 51.438212] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 51.438262] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 51.438308] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 51.438353] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 51.438397] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 51.438471] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 51.438675] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 51.441570] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[ 51.457629] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[ 51.458193] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 51.458281] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 51.468029] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 51.468456] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 51.469484] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 51.469648] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 51.469790] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[ 51.469935] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 51.470057] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ca18000
<7>[ 51.470172] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 51.470285] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 51.470398] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 51.470513] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 51.474897] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 51.475057] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7>[ 51.475202] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 51.479253] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 51.484695] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 51.484698] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 51.484700] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 51.484701] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 51.484703] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 51.484704] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 51.484705] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 51.484707] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 51.484708] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 51.484710] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 51.484744] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[ 51.484936] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[ 51.485098] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[ 51.486022] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 51.486163] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 51.486307] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 51.486442] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 51.486572] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 51.486699] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 51.486830] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 51.486959] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 51.487087] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 51.487217] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 51.487347] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 51.487472] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 51.487594] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 51.487730] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 51.487876] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 51.487995] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 51.488100] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 51.488204] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 51.488308] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 51.488425] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 51.488542] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 51.488650] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 51.488748] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 51.488851] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 51.488947] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 51.489043] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 51.489153] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 51.489806] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 51.489972] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 51.490361] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 51.490468] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 51.491079] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 51.491172] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 51.491257] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[ 51.491337] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 51.491416] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 51.491491] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 51.491564] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 51.491636] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 51.491707] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 51.491778] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 51.491860] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 51.491933] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 51.492003] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 51.492070] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 51.492156] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 51.492263] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 51.510339] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[ 51.511448] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 51.511590] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 51.531321] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 51.531806] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 51.533461] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 51.536842] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 51.539380] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 51.582407] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 51.584371] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 51.584733] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 51.585161] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0
<7>[ 51.585527] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 51.585862] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 51.586262] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 51.586602] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.586912] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.587204] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 51.588966] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 51.589371] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 51.589665] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 51.603123] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 51.614603] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[ 51.620203] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[ 51.621301] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 51.624565] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[ 51.624699] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[ 51.625408] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 51.626671] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[ 51.626736] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[ 51.627330] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 51.628705] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[ 51.628768] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[ 51.629291] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 51.630068] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[ 51.630102] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 51.630153] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 51.638178] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 51.640591] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 51.641502] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 51.641613] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 51.642737] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 51.642877] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 51.643025] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 51.643148] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 51.643268] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 51.643360] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 51.643445] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 51.643549] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 51.643638] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 51.643721] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 51.643880] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[ 51.643995] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[ 51.644103] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[ 51.644205] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[ 51.644363] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 51.644671] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 51.644686] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 51.645541] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 51.645996] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 51.646114] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 51.646227] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 51.646404] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 51.646409] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.646410] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.646412] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 51.646414] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.646415] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 51.646419] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.646420] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 51.646422] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.646446] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 51.646557] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 51.647206] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 51.647315] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 51.648360] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<7>[ 51.648799] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<5>[ 51.649181] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.649184] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.649185] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.649215] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 51.649227] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.649237] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 51.649247] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 51.649418] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 51.649428] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 51.649435] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 51.649571] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 51.649580] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 51.649587] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 51.649722] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 51.649731] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 51.649734] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 51.649736] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 51.649738] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 51.649799] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 51.649810] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 51.649812] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 51.649814] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 51.649816] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 51.649831] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 51.649861] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 51.649902] xe 0000:00:02.0: [drm:intelfb_create [xe]] no BIOS fb, allocating a new one
<7>[ 51.656635] xe 0000:00:02.0: [drm:intelfb_create [xe]] allocated 2880x1800 fb: 0x01d8e000
<6>[ 51.657556] fbcon: xedrmfb (fb0) is primary device
<7>[ 51.658429] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 51.658565] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 51.658674] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 51.658789] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 51.658915] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 51.659037] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 51.659156] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 51.659271] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 51.659379] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 51.659492] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 51.659596] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 51.659698] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 51.659793] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 51.659932] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 51.660047] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 51.660160] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 51.660260] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 51.660344] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 51.660428] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 51.660515] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 51.660596] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 51.660675] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 51.660753] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 51.660835] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 51.660918] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 51.661006] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 51.661095] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 51.661182] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 51.661255] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 51.661338] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 51.661426] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 51.661553] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 51.661652] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 51.661745] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 3, 1 -> 2, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 51.661841] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 25, 25, 25, 25, 25, 25, 0, 0, 7, 73, 7 -> 49, 289, 289, 289, 265, 289, 0, 0, 63, 73, 87
<7>[ 51.661934] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 319, 319, 319, 293, 319, 0, 0, 64, 82, 88
<7>[ 51.662029] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.662121] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.662200] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.662275] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.662343] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.662408] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.662473] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.662537] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.662601] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.662663] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.662726] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.662793] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.662884] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.662983] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.663075] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.663169] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.663250] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.663314] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.663374] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.663434] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.663496] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[ 51.663583] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 51.663666] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 51.663747] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.663834] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.663938] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 51.664059] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 51.664186] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 51.664281] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 51.664373] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 51.664452] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 51.664528] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 51.664603] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 51.664675] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 51.664747] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 51.664817] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 51.664915] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 51.665007] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 51.665096] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 51.665177] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 51.665249] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 51.665320] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 51.665386] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 51.665455] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 51.665524] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 51.665594] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 51.665662] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 51.665733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 51.665808] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[ 51.665904] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 2859, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7>[ 51.665991] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 2753, vmin vtotal: 1906, vmax vtotal: 2859
<7>[ 51.666075] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.666154] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.666223] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.666287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.666349] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.666411] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 51.666472] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 51.666531] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 51.666592] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 51.666657] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 51.666725] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 51.666790] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 51.666870] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 51.666958] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.667040] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.667121] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.667193] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.667253] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.667314] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.667374] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.667433] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.667494] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.667552] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.667610] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 51.667668] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 51.667728] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 51.667783] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 51.667845] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 51.667918] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 51.667994] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 51.668077] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[ 51.670126] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<6>[ 51.686092] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 51.686281] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[ 51.708867] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 51.872097] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[ 51.873587] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 51.894958] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 51.895136] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 51.895271] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 51.895488] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 51.895555] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 51.947734] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 51.948067] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 51.977974] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 51.978453] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 51.978435] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 51.979354] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 51.979362] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 51.979653] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[ 51.980013] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 51.980280] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[ 51.980532] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[ 51.980817] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[ 51.981081] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 51.981350] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[ 51.981563] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[ 51.981757] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[ 51.981977] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 51.982172] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[ 51.982363] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[ 51.982594] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[ 51.982795] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 51.982844] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 51.983086] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 51.983360] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 51.983645] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 51.983971] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 51.984222] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (495 ms remaining)
<7>[ 52.112426] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 52.488059] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7>[ 52.559989] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 52.560333] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 52.560655] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 52.596658] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 52.596994] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 52.597275] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 52.597707] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 52.689514] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.689514] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.689616] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.851922] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 52.854916] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 52.855327] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 52.858798] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 52.860118] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 52.861271] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 52.862468] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 52.863583] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 52.864930] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 52.865260] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 52.866949] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 52.867239] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 52.868046] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 52.868509] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 52.868891] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 52.869308] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[ 52.871223] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 52.871245] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 52.871540] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 52.885555] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 52.888469] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[ 52.888913] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[ 52.890383] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 52.893065] Console: switching to colour frame buffer device 180x56
<6>[ 52.907597] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 52.918005] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 52.918425] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 52.918746] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 52.919088] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 52.919387] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 52.919652] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 52.919920] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 52.920161] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 52.920442] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 52.920669] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 52.920932] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 52.921228] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 52.921448] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 52.921662] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 52.921892] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 52.922139] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 52.922334] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 52.922528] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 52.922736] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 52.922956] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 52.923155] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 52.923345] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 52.923656] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 52.923691] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 52.923666] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 52.924084] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 52.924442] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 52.924402] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 52.924471] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 52.924724] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[ 52.925008] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 52.925857] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[ 52.926026] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 52.926910] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 52.927268] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 52.927599] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 52.928204] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 52.928218] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.928221] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.928225] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 52.928230] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.928234] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 52.928244] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.928247] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 52.928253] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.928294] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 52.928554] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 52.929611] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 52.929965] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 52.930050] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<5>[ 52.932465] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.932473] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.932476] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.932578] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 52.932627] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 52.932659] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 52.932687] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 52.933187] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 52.933591] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 52.933905] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 52.934251] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.934530] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 52.934565] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 52.934592] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 52.934919] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.935171] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 52.935198] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 52.935223] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 52.935526] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.936871] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 52.936903] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 52.936916] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 52.936924] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 52.936931] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 52.937194] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 52.937233] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 52.937243] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 52.937250] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 52.937257] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 52.937309] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 52.940767] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 52.941130] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[ 52.952662] xe 0000:00:02.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<6>[ 52.984664] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[ 52.988210] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7>[ 52.988431] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[ 52.989206] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 53.002652] xe 0000:00:02.0: [drm:drm_client_dev_restore] intel-fbdev: ret=0
<7>[ 53.002746] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 53.002803] [IGT] xe_module_load: exiting, ret=0
<7>[ 53.028870] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 53.028987] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 53.029080] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 53.029169] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 53.029255] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 53.029338] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 53.029420] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 53.029500] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 53.029571] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 53.029638] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 53.029704] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 53.029771] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 53.029907] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 53.029983] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 53.030058] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 53.030132] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 53.030195] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 53.030258] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 53.030320] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 53.030380] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 53.030441] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 53.030502] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 53.030562] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 53.030622] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 53.030681] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 53.030741] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 53.030801] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 53.030876] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 53.030947] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 53.031017] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 53.031087] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 53.031152] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 53.031211] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 53.031270] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 53.031327] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 53.031385] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<6>[ 53.037426] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<7>[ 53.040060] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 53.040496] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 53.040602] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<6>[ 53.045176] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 53.048094] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 53.048517] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 53.050480] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[ 53.050613] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<7>[ 53.969008] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 53.969148] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 53.969180] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 54.179546] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 55.440919] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 55.441214] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067