<5>[ 0.000000] Linux version 6.14.0-rc2-xe+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Fri Feb 14 10:02:51 UTC 2025
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro earlyprintk=xdbc1,keep usbcore.autosuspend=-1
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001053fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000105400000-0x000000087f7fffff] usable
<5>[ 0.000000] xhci_dbc:early_xdbc_parse_parameter: dbgp_num: 1
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x68f86018 ESRT=0x68f97a98 MOKvar=0x6cd0c000
<6>[ 0.000000] efi: Remove mem277: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem279: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D97.2411281331 11/28/2024
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000013] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000018] MTRR map: 10 entries (3 fixed + 7 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000371] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000372] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004653] esrt: Reserving ESRT space from 0x0000000068f97a98 to 0x0000000068f97be8.
<7>[ 0.004661] e820: update [mem 0x68f97000-0x68f97fff] usable ==> reserved
<6>[ 0.004679] Using GB pages for direct mapping
<6>[ 0.005331] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[ 0.005332] printk: early log buf free: 258848(98%)
<6>[ 0.005332] Secure boot disabled
<6>[ 0.005334] ACPI: Early table checksum verification disabled
<6>[ 0.005337] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.005340] ACPI: XSDT 0x000000006FF7C228 00019C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005344] ACPI: FACP 0x000000006FFAB000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.005347] ACPI: DSDT 0x000000006FFB7000 025212 (v02 INTEL LNL 00000002 01000013)
<6>[ 0.005348] ACPI: FACS 0x000000006FEF1000 000040
<6>[ 0.005350] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.005351] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.005352] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.005354] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.005355] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.005356] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.005358] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.005359] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.005360] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.005361] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.005363] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.005364] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.005365] ACPI: SSDT 0x000000006FFE8000 002460 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.005367] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.005368] ACPI: SSDT 0x000000006FFDE000 008F36 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.005369] ACPI: SSDT 0x000000006FFDD000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.005370] ACPI: SSDT 0x000000006FFB2000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.005372] ACPI: SSDT 0x000000006FFB0000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.005373] ACPI: SSDT 0x000000006FFAC000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.005374] ACPI: HPET 0x000000006FFAA000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005375] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005377] ACPI: APIC 0x000000006FFA8000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.005378] ACPI: MCFG 0x000000006FFA7000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005379] ACPI: SSDT 0x000000006FFA6000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.005381] ACPI: SSDT 0x000000006FFA0000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.005382] ACPI: SSDT 0x000000006FF95000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.005383] ACPI: LPIT 0x000000006FF94000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005384] ACPI: SSDT 0x000000006FF93000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.005386] ACPI: SSDT 0x000000006FF92000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.005387] ACPI: DBGP 0x000000006FF91000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005388] ACPI: DBG2 0x000000006FF90000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005389] ACPI: NHLT 0x000000006FF8F000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005391] ACPI: SSDT 0x000000006FF8D000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.005392] ACPI: SSDT 0x000000006FF86000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.005394] ACPI: ECDT 0x000000006FF85000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.005395] ACPI: DMAR 0x000000006FF84000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005396] ACPI: FPDT 0x000000006FF83000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005398] ACPI: SSDT 0x000000006FF82000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.005399] ACPI: SSDT 0x000000006FF80000 001122 (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.005400] ACPI: SSDT 0x000000006FF7D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.005401] ACPI: SDEV 0x000000006FFA9000 000046 (v01 00000000 00000000)
<6>[ 0.005403] ACPI: SSDT 0x000000006FF71000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.005404] ACPI: SSDT 0x000000006FF63000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.005405] ACPI: ASF! 0x000000006FF62000 000074 (v32 INTEL LNL 00000002 01000013)
<6>[ 0.005407] ACPI: PHAT 0x000000006FF61000 0006E0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.005408] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005409] ACPI: Reserving FACP table memory at [mem 0x6ffab000-0x6ffab113]
<6>[ 0.005410] ACPI: Reserving DSDT table memory at [mem 0x6ffb7000-0x6ffdc211]
<6>[ 0.005410] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f]
<6>[ 0.005410] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.005411] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.005411] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.005411] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.005411] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.005412] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.005412] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.005412] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.005413] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.005413] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.005413] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.005413] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.005414] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea45f]
<6>[ 0.005414] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.005414] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe6f35]
<6>[ 0.005415] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0df]
<6>[ 0.005415] ACPI: Reserving SSDT table memory at [mem 0x6ffb2000-0x6ffb6ac2]
<6>[ 0.005415] ACPI: Reserving SSDT table memory at [mem 0x6ffb0000-0x6ffb140e]
<6>[ 0.005415] ACPI: Reserving SSDT table memory at [mem 0x6ffac000-0x6ffaf955]
<6>[ 0.005416] ACPI: Reserving HPET table memory at [mem 0x6ffaa000-0x6ffaa037]
<6>[ 0.005416] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.005416] ACPI: Reserving APIC table memory at [mem 0x6ffa8000-0x6ffa80d7]
<6>[ 0.005417] ACPI: Reserving MCFG table memory at [mem 0x6ffa7000-0x6ffa703b]
<6>[ 0.005417] ACPI: Reserving SSDT table memory at [mem 0x6ffa6000-0x6ffa66e2]
<6>[ 0.005417] ACPI: Reserving SSDT table memory at [mem 0x6ffa0000-0x6ffa5320]
<6>[ 0.005417] ACPI: Reserving SSDT table memory at [mem 0x6ff95000-0x6ff9f469]
<6>[ 0.005418] ACPI: Reserving LPIT table memory at [mem 0x6ff94000-0x6ff940cb]
<6>[ 0.005418] ACPI: Reserving SSDT table memory at [mem 0x6ff93000-0x6ff93d5b]
<6>[ 0.005418] ACPI: Reserving SSDT table memory at [mem 0x6ff92000-0x6ff921ef]
<6>[ 0.005419] ACPI: Reserving DBGP table memory at [mem 0x6ff91000-0x6ff91033]
<6>[ 0.005419] ACPI: Reserving DBG2 table memory at [mem 0x6ff90000-0x6ff90053]
<6>[ 0.005419] ACPI: Reserving NHLT table memory at [mem 0x6ff8f000-0x6ff8f2e2]
<6>[ 0.005419] ACPI: Reserving SSDT table memory at [mem 0x6ff8d000-0x6ff8e15b]
<6>[ 0.005420] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff8c53a]
<6>[ 0.005420] ACPI: Reserving ECDT table memory at [mem 0x6ff85000-0x6ff85068]
<6>[ 0.005420] ACPI: Reserving DMAR table memory at [mem 0x6ff84000-0x6ff840d7]
<6>[ 0.005421] ACPI: Reserving FPDT table memory at [mem 0x6ff83000-0x6ff83043]
<6>[ 0.005421] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff8286c]
<6>[ 0.005421] ACPI: Reserving SSDT table memory at [mem 0x6ff80000-0x6ff81121]
<6>[ 0.005421] ACPI: Reserving SSDT table memory at [mem 0x6ff7d000-0x6ff7f462]
<6>[ 0.005422] ACPI: Reserving SDEV table memory at [mem 0x6ffa9000-0x6ffa9045]
<6>[ 0.005422] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff7b4f9]
<6>[ 0.005422] ACPI: Reserving SSDT table memory at [mem 0x6ff63000-0x6ff70815]
<6>[ 0.005423] ACPI: Reserving ASF! table memory at [mem 0x6ff62000-0x6ff62073]
<6>[ 0.005423] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff616df]
<6>[ 0.005423] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037]
<6>[ 0.005487] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005689] No NUMA configuration found
<6>[ 0.005690] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005695] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<5>[ 5.230758] xhci_dbc:early_xdbc_setup_hardware: failed to setup the connection to host
<6>[ 5.230790] Zone ranges:
<6>[ 5.230791] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 5.230792] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 5.230793] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 5.230793] Device empty
<6>[ 5.230794] Movable zone start for each node
<6>[ 5.230794] Early memory node ranges
<6>[ 5.230795] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 5.230795] node 0: [mem 0x0000000000100000-0x000000006cac0fff]
<6>[ 5.230796] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 5.230797] node 0: [mem 0x0000000105400000-0x000000087f7fffff]
<6>[ 5.230798] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 5.230802] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 5.230819] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 5.232841] On node 0, zone DMA32: 13630 pages in unavailable ranges
<6>[ 5.261393] On node 0, zone Normal: 21504 pages in unavailable ranges
<6>[ 5.261456] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 5.261941] ACPI: PM-Timer IO Port: 0x1808
<6>[ 5.261947] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 5.261998] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 5.262000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 5.262001] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 5.262003] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 5.262004] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 5.262015] e820: update [mem 0x68f42000-0x68f5cfff] usable ==> reserved
<6>[ 5.262021] TSC deadline timer available
<6>[ 5.262023] CPU topo: Max. logical packages: 1
<6>[ 5.262023] CPU topo: Max. logical dies: 1
<6>[ 5.262023] CPU topo: Max. dies per package: 1
<6>[ 5.262025] CPU topo: Max. threads per core: 1
<6>[ 5.262025] CPU topo: Num. cores per package: 8
<6>[ 5.262026] CPU topo: Num. threads per package: 8
<6>[ 5.262026] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 5.262038] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 5.262039] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 5.262040] PM: hibernation: Registered nosave memory: [mem 0x68f42000-0x68f5cfff]
<6>[ 5.262041] PM: hibernation: Registered nosave memory: [mem 0x68f97000-0x68f97fff]
<6>[ 5.262042] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fe67fff]
<6>[ 5.262042] PM: hibernation: Registered nosave memory: [mem 0x6fe68000-0x6ff4ffff]
<6>[ 5.262042] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 5.262043] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 5.262043] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 5.262044] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 5.262044] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 5.262044] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1053fffff]
<6>[ 5.262046] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 5.262047] Booting paravirtualized kernel on bare hardware
<6>[ 5.262048] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 5.262057] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 5.262395] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 5.262399] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 5.262401] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 5.262414] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro earlyprintk=xdbc1,keep usbcore.autosuspend=-1
<5>[ 5.262491] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 5.262505] random: crng init done
<6>[ 5.264332] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 5.265245] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 5.265299] Fallback order for Node 0: 0
<6>[ 5.265302] Built 1 zonelists, mobility grouping on. Total pages: 8285792
<6>[ 5.265303] Policy zone: Normal
<6>[ 5.265312] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[ 5.265313] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 5.265315] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 5.266249] software IO TLB: area num 8.
<4>[ 5.311307] **********************************************************
<4>[ 5.311309] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 5.311309] ** **
<4>[ 5.311309] ** This system shows unhashed kernel memory addresses **
<4>[ 5.311309] ** via the console, logs, and other interfaces. This **
<4>[ 5.311310] ** might reduce the security of your system. **
<4>[ 5.311310] ** **
<4>[ 5.311310] ** If you see this message and you are not debugging **
<4>[ 5.311310] ** the kernel, report this immediately to your system **
<4>[ 5.311310] ** administrator! **
<4>[ 5.311310] ** **
<4>[ 5.311311] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 5.311311] **********************************************************
<6>[ 5.312408] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 5.312731] ftrace: allocating 59507 entries in 233 pages
<6>[ 5.338150] ftrace: allocated 233 pages with 5 groups
<6>[ 5.339358] Dynamic Preempt: voluntary
<6>[ 5.339799] Running RCU self tests
<6>[ 5.339799] Running RCU synchronous self tests
<6>[ 5.339800] rcu: Preemptible hierarchical RCU implementation.
<6>[ 5.339800] rcu: RCU lockdep checking is enabled.
<6>[ 5.339800] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 5.339801] Trampoline variant of Tasks RCU enabled.
<6>[ 5.339801] Rude variant of Tasks RCU enabled.
<6>[ 5.339801] Tracing variant of Tasks RCU enabled.
<6>[ 5.339802] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 5.339802] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 5.339840] Running RCU synchronous self tests
<6>[ 5.339846] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 5.339849] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 5.339851] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 5.350066] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 5.350519] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 5.350862] Console: colour dummy device 80x25
<6>[ 5.350870] printk: legacy console [tty0] enabled
<6>[ 5.352073] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[ 5.352080] ... MAX_LOCKDEP_SUBCLASSES: 8
<6>[ 5.352084] ... MAX_LOCK_DEPTH: 48
<6>[ 5.352088] ... MAX_LOCKDEP_KEYS: 8192
<6>[ 5.352091] ... CLASSHASH_SIZE: 4096
<6>[ 5.352095] ... MAX_LOCKDEP_ENTRIES: 524288
<6>[ 5.352099] ... MAX_LOCKDEP_CHAINS: 524288
<6>[ 5.352102] ... CHAINHASH_SIZE: 262144
<6>[ 5.352106] memory used by lock dependency info: 54145 kB
<6>[ 5.352110] memory used for stack traces: 4224 kB
<6>[ 5.352114] per task-struct memory footprint: 1920 bytes
<6>[ 5.352164] ACPI: Core revision 20240827
<6>[ 5.353042] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 5.353106] APIC: Switch to symmetric I/O mode setup
<6>[ 5.353112] DMAR: Host address width 38
<6>[ 5.353115] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 5.353148] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 5.353180] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 5.353201] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 5.353226] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 5.353247] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[ 5.353280] DMAR: SATC flags: 0x1
<6>[ 5.353290] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 5.353295] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 5.353299] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 5.355337] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 5.360409] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 5.360428] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[ 5.360501] CPU0: Thermal monitoring enabled (TM1)
<6>[ 5.360507] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 5.360716] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 5.360721] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 5.360731] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 5.360739] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 5.360745] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 5.360752] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 5.360760] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 5.360776] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 5.360784] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 5.360789] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 5.360795] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 5.360802] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 5.360808] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 5.360814] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 5.360819] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 5.360824] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 5.361422] Freeing SMP alternatives memory: 48K
<6>[ 5.361422] pid_max: default: 32768 minimum: 301
<6>[ 5.361422] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 5.361422] landlock: Up and running.
<6>[ 5.361422] Yama: becoming mindful.
<6>[ 5.361422] AppArmor: AppArmor initialized
<6>[ 5.361422] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 5.361422] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 5.361422] Running RCU synchronous self tests
<6>[ 5.361422] Running RCU synchronous self tests
<6>[ 5.361422] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 5.361422] Running RCU Tasks wait API self tests
<6>[ 5.361422] Running RCU Tasks Rude wait API self tests
<6>[ 5.361422] Running RCU Tasks Trace wait API self tests
<6>[ 5.361422] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 5.361422] core: cpu_core PMU driver:
<6>[ 5.361422] ... version: 6
<6>[ 5.361422] ... bit width: 48
<6>[ 5.361422] ... generic registers: 10
<6>[ 5.361427] ... value mask: 0000ffffffffffff
<6>[ 5.361431] ... max period: 00007fffffffffff
<6>[ 5.361435] ... fixed-purpose events: 4
<6>[ 5.361439] ... event mask: 0001000f000003ff
<6>[ 5.361470] signal: max sigframe size: 3632
<6>[ 5.361491] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 5.361575] rcu: Hierarchical SRCU implementation.
<6>[ 5.361580] rcu: Max phase no-delay instances is 400.
<6>[ 5.362502] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 5.364362] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 5.364629] smp: Bringing up secondary CPUs ...
<6>[ 5.364971] smpboot: x86: Booting SMP configuration:
<6>[ 5.364978] .... node #0, CPUs: #1 #2
<6>[ 5.366583] Callback from call_rcu_tasks_trace() invoked.
<4>[ 5.369548] #3 #4 #5 #6 #7
<6>[ 0.010714] core: cpu_atom PMU driver:
<6>[ 0.010714] ... version: 6
<6>[ 0.010714] ... bit width: 48
<6>[ 0.010714] ... generic registers: 8
<6>[ 0.010714] ... value mask: 0000ffffffffffff
<6>[ 0.010714] ... max period: 00007fffffffffff
<6>[ 0.010714] ... fixed-purpose events: 6
<6>[ 0.010714] ... event mask: 00000077000000ff
<6>[ 5.379520] smp: Brought up 1 node, 8 CPUs
<6>[ 5.379870] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 5.381587] Memory: 32344900K/33143168K available (24498K kernel code, 5577K rwdata, 9264K rodata, 5624K init, 68412K bss, 775236K reserved, 0K cma-reserved)
<6>[ 5.382457] devtmpfs: initialized
<6>[ 5.382603] x86/mm: Memory block size: 128MB
<6>[ 5.398588] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes)
<6>[ 5.398916] Running RCU synchronous self tests
<6>[ 5.398928] Running RCU synchronous self tests
<6>[ 5.399426] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 5.399451] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 5.399756] pinctrl core: initialized pinctrl subsystem
<6>[ 5.400251] PM: RTC time: 05:25:52, date: 2025-02-15
<6>[ 5.401104] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 5.402124] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 5.402420] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 5.402692] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 5.402753] audit: initializing netlink subsys (disabled)
<5>[ 5.402790] audit: type=2000 audit(1739597152.042:1): state=initialized audit_enabled=0 res=1
<6>[ 5.403811] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 5.403813] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 5.403819] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 5.403823] thermal_sys: Registered thermal governor 'user_space'
<6>[ 5.403828] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 5.403873] EISA bus registered
<6>[ 5.403899] cpuidle: using governor ladder
<6>[ 5.403899] cpuidle: using governor menu
<6>[ 5.403899] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 5.404682] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 5.404709] PCI: Using configuration type 1 for base access
<6>[ 5.404849] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 5.406467] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 5.406473] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 5.406478] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 5.406482] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 5.426423] raid6: avx2x4 gen() 76873 MB/s
<6>[ 5.443423] raid6: avx2x2 gen() 82835 MB/s
<6>[ 5.460423] raid6: avx2x1 gen() 74947 MB/s
<6>[ 5.460427] raid6: using algorithm avx2x2 gen() 82835 MB/s
<6>[ 5.477424] raid6: .... xor() 53813 MB/s, rmw enabled
<6>[ 5.477429] raid6: using avx2x2 recovery algorithm
<6>[ 5.479006] fbcon: Taking over console
<6>[ 5.479528] ACPI: Added _OSI(Module Device)
<6>[ 5.479528] ACPI: Added _OSI(Processor Device)
<6>[ 5.479528] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 5.479528] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 5.942949] ACPI: 31 ACPI AML tables successfully acquired and loaded
<6>[ 5.956955] ACPI: EC: EC started
<6>[ 5.956968] ACPI: EC: interrupt blocked
<6>[ 5.959323] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 5.959328] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 6.010441] Callback from call_rcu_tasks() invoked.
<6>[ 6.300422] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 6.300422] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 6.345546] ACPI: Interpreter enabled
<6>[ 6.345723] ACPI: PM: (supports S0 S4 S5)
<6>[ 6.345731] ACPI: Using IOAPIC for interrupt routing
<6>[ 6.353524] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 6.353542] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 6.384840] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 6.384913] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 6.448791] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 6.449289] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 6.454301] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 6.763334] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 6.777235] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 6.914950] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 6.916794] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 6.925198] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 6.946337] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 6.947067] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 6.947786] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 7.029351] ACPI: \: Can't tag data node
<3>[ 7.030760] ACPI: \: Can't tag data node
<3>[ 7.031915] ACPI: \: Can't tag data node
<3>[ 7.032958] ACPI: \: Can't tag data node
<3>[ 7.034509] ACPI: \: Can't tag data node
<6>[ 7.227251] ACPI: \_TZ_.FN00: New power resource
<6>[ 7.228788] ACPI: \_TZ_.FN01: New power resource
<6>[ 7.230309] ACPI: \_TZ_.FN02: New power resource
<6>[ 7.231972] ACPI: \_TZ_.FN03: New power resource
<6>[ 7.232381] ACPI: \_TZ_.FN04: New power resource
<6>[ 7.236789] ACPI: \PIN_: New power resource
<6>[ 7.246689] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 7.246732] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 7.255917] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC]
<6>[ 7.283592] PCI host bridge to bus 0000:00
<6>[ 7.283625] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 7.283633] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 7.283639] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 7.283646] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 7.283653] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 7.283661] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 7.286726] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 7.287319] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 7.287410] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 7.287419] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 7.287428] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 7.287472] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 7.288734] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 7.288764] pci 0000:00:04.0: BAR 0 [mem 0x3815c00000-0x3815c1ffff 64bit]
<6>[ 7.290158] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 7.290188] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 7.290196] pci 0000:00:05.0: BAR 4 [mem 0x3815c7b000-0x3815c7bfff 64bit]
<6>[ 7.291063] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 7.291106] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 7.291118] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 7.291136] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 7.291278] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 7.291335] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 7.296528] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 7.296578] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 7.296590] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 7.296608] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 7.296726] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 7.296781] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 7.301023] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 7.301073] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 7.301085] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 7.301103] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 7.301225] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 7.301274] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 7.305678] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 7.305715] pci 0000:00:0a.0: BAR 0 [mem 0x3815c50000-0x3815c5ffff 64bit]
<6>[ 7.305729] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 7.305931] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 7.305960] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 7.305968] pci 0000:00:0b.0: BAR 4 [mem 0x3815c7a000-0x3815c7afff 64bit]
<6>[ 7.306362] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 7.306416] pci 0000:00:0d.0: BAR 0 [mem 0x3815c40000-0x3815c4ffff 64bit]
<6>[ 7.306485] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 7.308000] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 7.308052] pci 0000:00:0d.2: BAR 0 [mem 0x3815bc0000-0x3815bfffff 64bit]
<6>[ 7.308061] pci 0000:00:0d.2: BAR 2 [mem 0x3815c79000-0x3815c79fff 64bit]
<6>[ 7.308118] pci 0000:00:0d.2: supports D1 D2
<6>[ 7.308122] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 7.309355] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 7.309407] pci 0000:00:0d.3: BAR 0 [mem 0x3815b80000-0x3815bbffff 64bit]
<6>[ 7.309415] pci 0000:00:0d.3: BAR 2 [mem 0x3815c78000-0x3815c78fff 64bit]
<6>[ 7.309781] pci 0000:00:0d.3: supports D1 D2
<6>[ 7.309785] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 7.311025] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 7.311083] pci 0000:00:12.0: BAR 0 [mem 0x3815c30000-0x3815c3ffff 64bit]
<6>[ 7.311151] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 7.313902] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 7.313992] pci 0000:00:13.0: BAR 0 [mem 0x3815c77000-0x3815c77fff 64bit]
<6>[ 7.314094] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 7.314508] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 7.314561] pci 0000:00:14.0: BAR 0 [mem 0x3815c20000-0x3815c2ffff 64bit]
<6>[ 7.314628] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 7.316440] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 7.316504] pci 0000:00:14.2: BAR 0 [mem 0x3815c68000-0x3815c6ffff 64bit]
<6>[ 7.316513] pci 0000:00:14.2: BAR 2 [mem 0x3815c76000-0x3815c76fff 64bit]
<6>[ 7.316807] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.316913] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 7.318566] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.318676] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 7.320022] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.320131] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 7.321803] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.321913] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 7.323211] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 7.323303] pci 0000:00:16.0: BAR 0 [mem 0x3815c71000-0x3815c71fff 64bit]
<6>[ 7.323411] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 7.325970] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint
<6>[ 7.326046] pci 0000:00:16.3: BAR 0 [io 0x4020-0x4027]
<6>[ 7.326053] pci 0000:00:16.3: BAR 1 [mem 0x94421000-0x94421fff]
<6>[ 7.326299] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[ 7.326332] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 7.326340] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 7.326348] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 7.326469] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 7.326526] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 7.345866] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 7.346014] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 7.346070] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 7.346599] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[ 7.346804] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[ 7.361192] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 7.365308] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 7.365604] pci 0000:00:1f.3: BAR 0 [mem 0x3815b00000-0x3815b7ffff 64bit]
<6>[ 7.365642] pci 0000:00:1f.3: BAR 4 [mem 0x3815800000-0x38159fffff 64bit]
<6>[ 7.365877] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 7.367249] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 7.367425] pci 0000:00:1f.4: BAR 0 [mem 0x3815c70000-0x3815c700ff 64bit]
<6>[ 7.367455] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 7.371050] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.371354] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 7.371837] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint
<6>[ 7.371948] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[ 7.372077] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 7.375615] pci 0000:00:1f.7: [8086:a824] type 00 class 0x130000 conventional PCI endpoint
<6>[ 7.375721] pci 0000:00:1f.7: BAR 0 [mem 0x3815a00000-0x3815afffff 64bit]
<6>[ 7.375741] pci 0000:00:1f.7: BAR 2 [mem 0x3815000000-0x38157fffff 64bit]
<6>[ 7.375761] pci 0000:00:1f.7: BAR 4 [mem 0x3815c60000-0x3815c67fff 64bit]
<6>[ 7.376508] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 7.376864] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 7.377217] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 7.377763] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[ 7.377880] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff]
<6>[ 7.377901] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[ 7.377921] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[ 7.378205] pci 0000:7f:00.0: supports D1 D2
<6>[ 7.378215] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 7.379413] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 7.382702] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 7.384596] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 7.384885] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 7.386510] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 7.386628] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 7.810245] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 19.573706] Low-power S0 idle used by default for system suspend
<6>[ 19.625591] ACPI: EC: interrupt unblocked
<6>[ 19.625602] ACPI: EC: event unblocked
<6>[ 19.625639] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 19.625645] ACPI: EC: GPE=0x6e
<6>[ 19.625650] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 19.625659] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 19.626759] iommu: Default domain type: Translated
<6>[ 19.626765] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 19.628162] SCSI subsystem initialized
<7>[ 19.628476] libata version 3.00 loaded.
<6>[ 19.628578] ACPI: bus type USB registered
<6>[ 19.628646] usbcore: registered new interface driver usbfs
<6>[ 19.628679] usbcore: registered new interface driver hub
<6>[ 19.628716] usbcore: registered new device driver usb
<6>[ 19.628845] pps_core: LinuxPPS API ver. 1 registered
<6>[ 19.628849] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 19.628867] PTP clock support registered
<6>[ 19.629715] EDAC MC: Ver: 3.0.0
<6>[ 19.634677] efivars: Registered efivars operations
<6>[ 19.642252] NetLabel: Initializing
<6>[ 19.642264] NetLabel: domain hash size = 128
<6>[ 19.642275] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 19.642451] NetLabel: unlabeled traffic allowed by default
<6>[ 19.642489] mctp: management component transport protocol core
<6>[ 19.642502] NET: Registered PF_MCTP protocol family
<6>[ 19.642596] PCI: Using ACPI for IRQ routing
<7>[ 19.702111] PCI: pci_cache_line_size set to 64 bytes
<6>[ 19.702451] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 19.702659] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 19.702680] e820: reserve RAM buffer [mem 0x68f42000-0x6bffffff]
<7>[ 19.702688] e820: reserve RAM buffer [mem 0x68f97000-0x6bffffff]
<7>[ 19.702695] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff]
<7>[ 19.702702] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 19.703499] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 19.703533] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 19.703547] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6>[ 19.703586] vgaarb: loaded
<6>[ 19.704970] clocksource: Switched to clocksource tsc-early
<5>[ 19.717116] VFS: Disk quotas dquot_6.6.0
<6>[ 19.717175] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 19.719344] AppArmor: AppArmor Filesystem Enabled
<6>[ 19.719727] pnp: PnP ACPI init
<6>[ 19.721776] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 19.721803] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 19.725435] system 00:02: [io 0x06a4] has been reserved
<6>[ 19.725459] system 00:02: [io 0x06a0] has been reserved
<6>[ 19.773491] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 19.773524] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 19.773544] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 19.773559] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 19.773574] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
<6>[ 19.773591] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 19.773608] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 19.773622] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 19.778994] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 19.783301] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 19.783561] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 19.790838] pnp: PnP ACPI: found 8 devices
<6>[ 19.805031] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 19.805449] NET: Registered PF_INET protocol family
<6>[ 19.805761] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 19.808817] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 19.809118] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 19.809410] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 19.810439] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 19.812401] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 19.813060] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 19.814681] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 19.816356] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 19.816477] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 19.816497] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 19.816512] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 19.816593] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 19.816604] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 19.816613] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]: assigned
<6>[ 19.816623] pci 0000:00:15.0: BAR 0 [mem 0x3815c72000-0x3815c72fff 64bit]: assigned
<6>[ 19.816678] pci 0000:00:15.1: BAR 0 [mem 0x3815c73000-0x3815c73fff 64bit]: assigned
<6>[ 19.816849] pci 0000:00:15.2: BAR 0 [mem 0x3815c74000-0x3815c74fff 64bit]: assigned
<6>[ 19.816903] pci 0000:00:15.3: BAR 0 [mem 0x3815c75000-0x3815c75fff 64bit]: assigned
<6>[ 19.816958] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 19.817010] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 19.817023] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
<6>[ 19.817035] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 19.817047] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 19.817062] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 19.817071] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]
<6>[ 19.817083] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 19.817094] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 19.817110] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 19.817118] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]
<6>[ 19.817130] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 19.817142] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 19.817158] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 19.817167] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 19.817178] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 19.817193] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 19.817232] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 19.817279] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 19.817287] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 19.817295] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 19.817304] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 19.817313] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 19.817323] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
<6>[ 19.817330] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 19.817339] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 19.817349] pci_bus 0000:2b: resource 0 [io 0x6000-0x6fff]
<6>[ 19.817356] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 19.817364] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 19.817374] pci_bus 0000:55: resource 0 [io 0x7000-0x7fff]
<6>[ 19.817382] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 19.817390] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 19.817400] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff]
<6>[ 19.817407] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[ 19.817416] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 19.818900] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 19.821115] PCI: CLS 0 bytes, default 64
<6>[ 19.821258] DMAR: No RMRR found
<6>[ 19.821273] DMAR: No ATSR found
<6>[ 19.821279] DMAR: dmar1: Using Queued invalidation
<6>[ 19.821306] DMAR: dmar0: Using Queued invalidation
<6>[ 19.821318] DMAR: dmar2: Using Queued invalidation
<6>[ 19.822429] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 19.822536] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 19.822631] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 19.822712] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 19.826946] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 19.828604] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 19.828699] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 19.828785] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 19.828867] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 19.828978] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 19.829035] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 19.829089] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 19.829181] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 19.829268] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 19.829366] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 19.829421] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 19.829539] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 19.829594] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 19.829649] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 19.829712] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 19.829810] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 19.829870] pci 0000:00:16.3: Adding to iommu group 14
<6>[ 19.829947] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 19.830049] pci 0000:00:1c.4: Adding to iommu group 16
<6>[ 19.830191] pci 0000:00:1f.0: Adding to iommu group 17
<6>[ 19.830249] pci 0000:00:1f.3: Adding to iommu group 17
<6>[ 19.830309] pci 0000:00:1f.4: Adding to iommu group 17
<6>[ 19.830372] pci 0000:00:1f.5: Adding to iommu group 17
<6>[ 19.830431] pci 0000:00:1f.6: Adding to iommu group 17
<6>[ 19.830489] pci 0000:00:1f.7: Adding to iommu group 17
<6>[ 19.830567] pci 0000:7f:00.0: Adding to iommu group 18
<6>[ 19.830667] pci 0000:80:00.0: Adding to iommu group 19
<6>[ 19.844384] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 19.844404] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 19.844413] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB)
<6>[ 19.852075] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 19.852141] clocksource: Switched to clocksource tsc
<6>[ 19.852322] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 19.857742] Initialise system trusted keyrings
<5>[ 19.857845] Key type blacklist registered
<6>[ 19.858344] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 19.868277] zbud: loaded
<6>[ 19.869558] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 19.869681] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 19.869688] ntfs3: Read-only LZX/Xpress compression included
<5>[ 19.870117] integrity: Platform Keyring initialized
<5>[ 19.870140] integrity: Machine keyring initialized
<6>[ 19.876451] xor: automatically using best checksumming function avx
<5>[ 19.876462] Key type asymmetric registered
<5>[ 19.876475] Asymmetric key parser 'x509' registered
<6>[ 19.876600] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 19.877097] io scheduler mq-deadline registered
<6>[ 19.878006] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 19.879637] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 19.880165] pcieport 0000:00:07.0: AER: enabled with IRQ 126
<6>[ 19.881391] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 19.881877] pcieport 0000:00:07.1: AER: enabled with IRQ 127
<6>[ 19.883085] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 19.883549] pcieport 0000:00:07.2: AER: enabled with IRQ 128
<6>[ 19.884663] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 19.885152] pcieport 0000:00:1c.0: AER: enabled with IRQ 129
<6>[ 19.886664] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[ 19.887247] pcieport 0000:00:1c.4: AER: enabled with IRQ 130
<6>[ 19.887870] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 19.890937] Monitor-Mwait will be used to enter C-1 state
<7>[ 19.891070] Monitor-Mwait will be used to enter C-2 state
<7>[ 19.891124] Monitor-Mwait will be used to enter C-3 state
<6>[ 19.897443] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 19.897649] ACPI: button: Lid Switch [LID0]
<6>[ 19.897916] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 19.898074] ACPI: button: Sleep Button [SLPB]
<6>[ 19.898276] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 19.898650] ACPI: button: Power Button [PWRB]
<4>[ 19.908580] ACPI Warning: \_SB.PR00._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 19.915761] ACPI Warning: \_SB.PR01._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 19.924273] ACPI Warning: \_SB.PR02._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 19.933910] ACPI Warning: \_SB.PR03._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 19.942647] ACPI Warning: \_SB.PR04._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 19.950135] ACPI Warning: \_SB.PR05._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 19.957769] ACPI Warning: \_SB.PR06._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 19.965075] ACPI Warning: \_SB.PR07._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<6>[ 20.054480] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 20.054489] ACPI: thermal: Thermal Zone [TZ00] (59 C)
<6>[ 20.058447] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 20.058526] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 20.060732] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 20.083221] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 20.115473] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[ 20.118928] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[ 20.143697] 0000:00:16.3: ttyS4 at I/O 0x4020 (irq = 19, base_baud = 115200) is a 16550A
<4>[ 20.148083] hpet_acpi_add: no address or irqs in _CRS
<6>[ 20.148347] Linux agpgart interface v0.103
<6>[ 20.149859] ACPI: bus type drm_connector registered
<6>[ 20.182388] loop: module loaded
<6>[ 20.252789] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 20.398833] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 20.560747] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 20.683839] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[ 20.896925] Key type psk registered
<6>[ 20.901481] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[ 20.902450] tun: Universal TUN/TAP device driver, 1.6
<6>[ 20.904303] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 20.904514] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 20.904777] nvme nvme0: pci function 0000:80:00.0
<6>[ 20.908233] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 20.911068] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 20.911113] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 20.911148] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 20.912141] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 20.912191] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 20.912211] usb usb1: Product: xHCI Host Controller
<6>[ 20.912224] usb usb1: Manufacturer: Linux 6.14.0-rc2-xe+ xhci-hcd
<6>[ 20.912239] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 20.915495] hub 1-0:1.0: USB hub found
<6>[ 20.915648] hub 1-0:1.0: 1 port detected
<6>[ 20.922323] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 20.922348] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 20.922365] usb usb2: Product: xHCI Host Controller
<6>[ 20.922378] usb usb2: Manufacturer: Linux 6.14.0-rc2-xe+ xhci-hcd
<6>[ 20.922392] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 20.924110] hub 2-0:1.0: USB hub found
<6>[ 20.924194] hub 2-0:1.0: 3 ports detected
<6>[ 20.944083] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 20.953752] nvme0n1: p1 p2
<6>[ 20.990335] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 20.990393] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 20.993420] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 20.995872] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 20.995912] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 20.995941] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 20.996280] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 20.996302] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 20.996320] usb usb3: Product: xHCI Host Controller
<6>[ 20.996332] usb usb3: Manufacturer: Linux 6.14.0-rc2-xe+ xhci-hcd
<6>[ 20.996346] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 20.998001] hub 3-0:1.0: USB hub found
<6>[ 20.998101] hub 3-0:1.0: 8 ports detected
<6>[ 21.056401] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 21.056430] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 21.056448] usb usb4: Product: xHCI Host Controller
<6>[ 21.056460] usb usb4: Manufacturer: Linux 6.14.0-rc2-xe+ xhci-hcd
<6>[ 21.056475] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 21.058080] hub 4-0:1.0: USB hub found
<6>[ 21.058159] hub 4-0:1.0: 2 ports detected
<6>[ 21.071028] usbcore: registered new interface driver usb-storage
<6>[ 21.071240] usbcore: registered new interface driver usbserial_generic
<6>[ 21.071382] usbserial: USB Serial support registered for generic
<6>[ 21.071473] usbcore: registered new interface driver ftdi_sio
<6>[ 21.071547] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 21.071632] usbcore: registered new interface driver pl2303
<6>[ 21.071691] usbserial: USB Serial support registered for pl2303
<6>[ 21.071911] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 21.071928] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[ 21.788150] i8042: Can't read CTR while initializing i8042
<3>[ 21.788174] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 21.789772] mousedev: PS/2 mouse device common for all mice
<6>[ 21.791740] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 21.794795] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 21.795080] rtc_cmos rtc_cmos: setting system clock to 2025-02-15T05:26:08 UTC (1739597168)
<6>[ 21.795427] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 21.795528] i2c_dev: i2c /dev entries driver
<6>[ 21.801975] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 21.802008] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 21.802031] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 21.802106] device-mapper: uevent: version 1.0.3
<6>[ 21.803255] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[ 21.803513] platform eisa.0: Probing EISA bus 0
<4>[ 21.803537] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 21.803564] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 21.803589] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 21.803613] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 21.803637] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 21.803662] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 21.803686] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 21.803710] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 21.803750] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 21.803770] platform eisa.0: EISA: Detected 0 cards
<6>[ 21.803788] intel_pstate: Intel P-state driver initializing
<6>[ 21.810549] Hybrid CPU capacity scaling enabled
<6>[ 21.813292] intel_pstate: HWP enabled
<6>[ 21.813307] sdhci: Secure Digital Host Controller Interface driver
<6>[ 21.813323] sdhci: Copyright(c) Pierre Ossman
<6>[ 21.813536] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 21.817606] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[ 21.818518] drop_monitor: Initializing network drop monitor service
<6>[ 21.818777] NET: Registered PF_INET6 protocol family
<6>[ 21.822569] Segment Routing with IPv6
<6>[ 21.822636] In-situ OAM (IOAM) with IPv6
<6>[ 21.822702] NET: Registered PF_PACKET protocol family
<5>[ 21.823334] Key type dns_resolver registered
<4>[ 21.828816] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 21.829457] microcode: Current revision: 0x0000011b
<6>[ 21.830612] IPI shorthand broadcast: enabled
<6>[ 21.849301] sched_clock: Marking stable (21839000923, 9714758)->(21963106380, -114390699)
<6>[ 21.850048] registered taskstats version 1
<5>[ 21.851340] Loading compiled-in X.509 certificates
<6>[ 21.878644] Demotion targets for Node 0: null
<6>[ 21.878925] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<6>[ 21.878928] kmemleak: Automatic memory scanning thread started
<4>[ 21.878935] ------------[ cut here ]------------
<4>[ 21.878943] Debug warning: early ioremap leak of 1 areas detected.
please boot with early_ioremap_debug and report the dmesg.
<4>[ 21.878958] WARNING: CPU: 3 PID: 1 at mm/early_ioremap.c:90 check_early_ioremap_leak+0x51/0x80
<4>[ 21.878969] Modules linked in:
<4>[ 21.878974] CPU: 3 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc2-xe+ #1
<4>[ 21.878981] Hardware name: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D97.2411281331 11/28/2024
<4>[ 21.878991] RIP: 0010:check_early_ioremap_leak+0x51/0x80
<4>[ 21.878997] Code: 48 83 c3 01 48 83 fb 08 75 e1 85 c0 75 0e 48 8b 5d f8 c9 31 f6 31 ff c3 cc cc cc cc 89 c6 48 c7 c7 b8 fb ea 82 e8 ff d3 b6 fd <0f> 0b b8 01 00 00 00 48 8b 5d f8 c9 31 f6 31 ff c3 cc cc cc cc 48
<4>[ 21.879011] RSP: 0000:ffffc900000f7dc0 EFLAGS: 00010246
<4>[ 21.879017] RAX: 0000000000000000 RBX: 0000000000000008 RCX: 0000000000000000
<4>[ 21.879022] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
<4>[ 21.879028] RBP: ffffc900000f7dd0 R08: 0000000000000000 R09: 0000000000000000
<4>[ 21.879033] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
<4>[ 21.879039] R13: ffffffff83acf2f4 R14: ffffc900000f7de0 R15: 000000000003828c
<4>[ 21.879045] FS: 0000000000000000(0000) GS:ffff88885f380000(0000) knlGS:0000000000000000
<4>[ 21.879052] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 21.879057] CR2: 0000000000000000 CR3: 0000000003248001 CR4: 0000000000f70ef0
<4>[ 21.879063] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
<4>[ 21.879068] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
<4>[ 21.879074] PKRU: 55555554
<4>[ 21.879077] Call Trace:
<4>[ 21.879080] <TASK>
<4>[ 21.879083] ? show_regs+0x6c/0x80
<4>[ 21.879090] ? __warn+0x93/0x1c0
<4>[ 21.879095] ? check_early_ioremap_leak+0x51/0x80
<4>[ 21.879100] ? report_bug+0x182/0x1b0
<4>[ 21.879107] ? handle_bug+0x6e/0xb0
<4>[ 21.879112] ? exc_invalid_op+0x18/0x80
<4>[ 21.879117] ? asm_exc_invalid_op+0x1b/0x20
<4>[ 21.879124] ? check_early_ioremap_leak+0x51/0x80
<4>[ 21.879129] ? __pfx_check_early_ioremap_leak+0x10/0x10
<4>[ 21.879133] ? __pfx_check_early_ioremap_leak+0x10/0x10
<4>[ 21.879137] do_one_initcall+0x76/0x400
<4>[ 21.879144] kernel_init_freeable+0x3da/0x6a0
<4>[ 21.879151] ? __pfx_kernel_init+0x10/0x10
<4>[ 21.879157] kernel_init+0x1b/0x200
<4>[ 21.879161] ret_from_fork+0x44/0x70
<4>[ 21.879165] ? __pfx_kernel_init+0x10/0x10
<4>[ 21.879169] ret_from_fork_asm+0x1a/0x30
<4>[ 21.879176] </TASK>
<4>[ 21.879179] irq event stamp: 81572119
<4>[ 21.879182] hardirqs last enabled at (81572127): [<ffffffff814a4d09>] __up_console_sem+0x79/0xa0
<4>[ 21.879190] hardirqs last disabled at (81572134): [<ffffffff814a4cee>] __up_console_sem+0x5e/0xa0
<4>[ 21.879196] softirqs last enabled at (81562060): [<ffffffff813d3fbf>] __irq_exit_rcu+0x13f/0x160
<4>[ 21.879203] softirqs last disabled at (81562039): [<ffffffff813d3fbf>] __irq_exit_rcu+0x13f/0x160
<4>[ 21.879210] ---[ end trace 0000000000000000 ]---
<5>[ 21.879432] Key type .fscrypt registered
<5>[ 21.879437] Key type fscrypt-provisioning registered
<6>[ 21.882097] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 21.884146] Key type encrypted registered
<6>[ 21.884156] AppArmor: AppArmor sha256 policy hashing enabled
<6>[ 21.884243] ima: No TPM chip found, activating TPM-bypass!
<5>[ 21.884256] Loading compiled-in module X.509 certificates
<5>[ 21.885041] Loaded X.509 cert 'Build time autogenerated kernel key: 63ab930fbcbd2c4f46057d17d8494b7787ca9b0e'
<6>[ 21.885056] ima: Allocated hash algorithm: sha256
<6>[ 21.885101] ima: No architecture policies found
<6>[ 21.885201] evm: Initialising EVM extended attributes:
<6>[ 21.885206] evm: security.selinux
<6>[ 21.885209] evm: security.SMACK64
<6>[ 21.885212] evm: security.SMACK64EXEC
<6>[ 21.885215] evm: security.SMACK64TRANSMUTE
<6>[ 21.885219] evm: security.SMACK64MMAP
<6>[ 21.885222] evm: security.apparmor
<6>[ 21.885225] evm: security.ima
<6>[ 21.885228] evm: security.capability
<6>[ 21.885231] evm: HMAC attrs: 0x1
<6>[ 21.887203] PM: Magic number: 13:5:416
<6>[ 21.887233] thermal cooling_device12: hash matches
<6>[ 21.887282] acpi ACPI0007:2b: hash matches
<6>[ 21.887433] printk: legacy console [netcon0] enabled
<6>[ 21.887439] netconsole: network logging started
<6>[ 21.887996] RAS: Correctable Errors collector initialized.
<6>[ 21.888123] clk: Disabling unused clocks
<6>[ 21.888133] PM: genpd: Disabling unused power domains
<6>[ 21.888653] md: Waiting for all devices to be available before autodetect
<6>[ 21.888659] md: If you don't use raid, use raid=noautodetect
<6>[ 21.888665] md: Autodetecting RAID arrays.
<6>[ 21.888950] md: autorun ...
<6>[ 21.888954] md: ... autorun DONE.
<6>[ 21.937093] EXT4-fs (nvme0n1p2): mounted filesystem e14561b2-a821-43fb-816a-3be81f76b65f ro with ordered data mode. Quota mode: none.
<6>[ 21.937158] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 21.937679] devtmpfs: mounted
<6>[ 21.950109] Freeing unused decrypted memory: 2028K
<6>[ 21.951022] Freeing unused kernel image (initmem) memory: 5624K
<6>[ 21.951046] Write protecting the kernel read-only data: 34816k
<6>[ 21.951459] Freeing unused kernel image (text/rodata gap) memory: 76K
<6>[ 21.951830] Freeing unused kernel image (rodata/data gap) memory: 976K
<6>[ 21.956211] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 21.956235] Run /sbin/init as init process
<7>[ 21.956239] with arguments:
<7>[ 21.956240] /sbin/init
<7>[ 21.956241] with environment:
<7>[ 21.956242] HOME=/
<7>[ 21.956243] TERM=linux
<7>[ 21.956243] BOOT_IMAGE=/boot/drm_intel
<7>[ 22.001823] systemd[1]: Inserted module 'autofs4'
<7>[ 22.021138] systemd[1]: systemd 255.4-1ubuntu8.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 22.021181] systemd[1]: Detected architecture x86-64.
<7>[ 22.022261] systemd[1]: Hostname set to <shard-lnl-5>.
<7>[ 22.218228] systemd[1]: Configuration file /run/systemd/system/systemd-networkd-wait-online.service.d/10-netplan.conf is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 22.219024] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 22.284472] systemd[1]: Queued start job for default target graphical.target.
<7>[ 22.313860] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 22.317682] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 22.320758] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 22.321237] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 22.322393] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 22.322584] systemd[1]: Expecting device dev-disk-by\x2duuid-BBA4\x2d5DAC.device - /dev/disk/by-uuid/BBA4-5DAC...
<7>[ 22.322781] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 22.322920] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 22.323037] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 22.323148] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 22.323262] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 22.323654] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 22.324909] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 22.325306] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 22.325713] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 22.326031] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 22.326267] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 22.326577] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 22.326916] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 22.327203] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 22.327384] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 22.327664] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 22.327935] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 22.330864] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 22.333244] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 22.335778] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 22.338391] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 22.343917] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 22.347449] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 22.351037] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 22.353776] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 22.358348] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 22.361215] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 22.364420] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 22.367759] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 22.371911] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 22.375281] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 22.380127] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 22.380281] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<7>[ 22.380406] systemd-journald[211]: Collecting audit messages is disabled.
<7>[ 22.389478] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[ 22.391324] pstore: Using crash dump compression: deflate
<6>[ 22.392465] pstore: Registered efi_pstore as persistent store backend
<7>[ 22.396351] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 22.397160] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 22.397267] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 22.402900] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<6>[ 22.403325] fuse: init (API version 7.42)
<7>[ 22.408878] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 22.569141] EXT4-fs (nvme0n1p2): re-mounted e14561b2-a821-43fb-816a-3be81f76b65f r/w. Quota mode: none.
<6>[ 22.597556] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:411435008k SS
<7>[ 22.610198] systemd-journald[211]: Received client request to flush runtime journal.
<7>[ 22.628868] systemd-journald[211]: /var/log/journal/50de536483fd4db8b6bcf2f985230a3b/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 22.628887] systemd-journald[211]: Rotating system journal.
<4>[ 23.280563] nvme nvme0: using unchecked data buffer
<6>[ 23.419576] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<4>[ 23.462257] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 23.503917] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<6>[ 23.509655] intel-hid INTC107B:00: platform supports 5 button array
<6>[ 23.513679] pci 0000:00:05.0: Setting to D3hot
<6>[ 23.514016] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<6>[ 23.525879] pci 0000:00:0b.0: Setting to D3hot
<4>[ 23.538335] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 23.538688] intel_pmc_core INT33A1:00: initialized
<3>[ 23.564978] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<3>[ 23.568403] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<5>[ 23.619509] audit: type=1400 audit(1739597170.322:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=428 comm="apparmor_parser"
<5>[ 23.620420] audit: type=1400 audit(1739597170.323:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=426 comm="apparmor_parser"
<5>[ 23.621471] audit: type=1400 audit(1739597170.324:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=427 comm="apparmor_parser"
<5>[ 23.621816] audit: type=1400 audit(1739597170.325:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=429 comm="apparmor_parser"
<5>[ 23.625063] audit: type=1400 audit(1739597170.328:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=430 comm="apparmor_parser"
<5>[ 23.630105] audit: type=1400 audit(1739597170.332:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=431 comm="apparmor_parser"
<5>[ 23.634204] audit: type=1400 audit(1739597170.337:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=435 comm="apparmor_parser"
<5>[ 23.640338] audit: type=1400 audit(1739597170.343:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=432 comm="apparmor_parser"
<5>[ 23.640920] audit: type=1400 audit(1739597170.344:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=434 comm="apparmor_parser"
<5>[ 23.641534] audit: type=1400 audit(1739597170.344:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=433 comm="apparmor_parser"
<6>[ 24.029930] ACPI: bus type thunderbolt registered
<6>[ 24.032380] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 24.051970] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 24.057349] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[ 24.057358] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[ 24.068608] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 24.097173] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 24.097181] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 24.097315] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 24.098398] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 24.108596] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 24.123393] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[ 24.124999] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 24.127141] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 24.129278] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 24.137468] intel_rapl_common: Found RAPL domain package
<6>[ 24.137474] intel_rapl_common: Found RAPL domain dram
<6>[ 24.243163] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
<6>[ 24.243171] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 24.243173] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 24.243174] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 24.243175] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
<6>[ 24.243177] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 24.260867] cryptd: max_cpu_qlen set to 1000
<6>[ 24.282358] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 24.283384] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c8:f7:85, XID 541, IRQ 184
<6>[ 24.283389] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[ 24.350325] AES CTR mode by8 optimization enabled
<4>[ 24.352801] block nvme0n1: No UUID available providing old NGUID
<6>[ 24.568210] evm: overlay not supported
<6>[ 24.639129] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[ 24.719428] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:35:90
<6>[ 24.719437] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[ 24.719657] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[ 24.739383] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[ 24.766367] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[ 24.766374] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[ 24.766376] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<6>[ 24.912957] loop0: detected capacity change from 0 to 8
<6>[ 25.054437] intel_rapl_common: Found RAPL domain package
<6>[ 25.054444] intel_rapl_common: Found RAPL domain core
<6>[ 25.054446] intel_rapl_common: Found RAPL domain uncore
<6>[ 25.054449] intel_rapl_common: Found RAPL domain dram
<6>[ 25.054451] intel_rapl_common: Found RAPL domain psys
<6>[ 25.239575] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<4>[ 25.283158] spi-nor spi0.0: supply vcc not found, using dummy regulator
<6>[ 25.352132] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<5>[ 25.360357] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 25.360388] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 25.433850] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[ 25.595297] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[ 25.766242] hid: raw HID events driver (C) Jiri Kosina
<6>[ 25.772655] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 25.807198] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 25.808451] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 25.810215] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 25.811490] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 25.813646] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 25.814895] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 25.820612] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 25.824699] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 25.829386] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 25.832253] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 25.835595] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 25.837937] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 26.625680] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 26.625755] typec port0: bound usb2-port1 (ops connector_ops)
<6>[ 27.623846] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 27.623880] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 29.207031] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<7>[ 34.255032] systemd-journald[211]: /var/log/journal/50de536483fd4db8b6bcf2f985230a3b/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 53.422640] [IGT] xe_module_load: executing
<7>[ 53.437350] [IGT] xe_module_load: starting subtest load
<6>[ 53.620771] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 53.622636] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[ 53.622647] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG / Xe2_HPG / Xe3_LPG (20.04) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 53.622753] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 53.622851] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 53.630546] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 53.634391] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 53.634473] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 53.634536] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 53.634595] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 53.634652] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 53.634707] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 53.634781] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 53.634851] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 53.634918] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 53.634983] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 53.635046] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 53.635099] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 53.635151] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 53.635201] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 53.635250] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 53.635339] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 53.636368] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 53.636444] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 53.645780] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 53.646633] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 53.646711] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 53.646832] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,0000007f
<7>[ 53.646905] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,0000007f
<7>[ 53.646973] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 53.647038] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 53.647103] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 53.647663] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 53.651939] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 53.652014] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 53.652065] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 53.652112] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 53.652159] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 53.652207] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 53.652254] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 53.652301] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 53.652346] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 53.652391] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 53.652435] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 53.652479] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 53.652522] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 53.652565] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 53.653915] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 53.656064] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1263
<6>[ 53.656919] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 53.657012] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 53.657122] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 53.658384] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 53.658612] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 53.677778] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 53.678345] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 53.678578] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 53.678847] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 53.679062] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 53.679269] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 53.679469] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 53.679662] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 53.680435] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 53.680801] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[ 53.681128] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7>[ 53.681459] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 53.681784] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 53.682103] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 53.682365] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 53.682621] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 53.682992] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 53.683293] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 53.683608] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 53.683957] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 53.684262] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 53.684580] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 53.684968] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 53.685288] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 53.685590] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 53.685911] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 53.686258] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 53.686607] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 53.686929] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 53.687200] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 53.687458] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 53.687708] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 53.687988] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 53.688228] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 53.688509] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 53.688749] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 53.688971] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 53.689193] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 53.689439] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 53.689654] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 53.689892] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 53.690104] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 53.690330] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 53.690537] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 53.690749] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 53.690981] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 53.691179] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 53.691369] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 53.691602] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 53.692893] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 53.693221] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 53.693456] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 53.693659] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 53.693891] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 53.694070] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 53.694235] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 53.694389] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 53.694530] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 53.694687] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 53.695138] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 53.695268] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 53.695413] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 53.695558] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 53.695678] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 53.695826] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 53.695960] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 53.696081] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 53.696196] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 53.696310] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 53.696420] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 53.696528] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 53.696630] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 53.696737] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 53.696835] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 53.696927] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 53.697018] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 53.697115] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 53.697270] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 53.697478] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 53.697641] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 53.698246] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 53.698724] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 53.699093] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 53.699194] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 53.699291] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 53.699420] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 53.699519] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=mem
<7>[ 53.699542] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 53.699656] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 53.699753] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 53.699855] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 53.700144] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 53.700313] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 53.700906] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 53.701033] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 53.701123] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 9 (9.0 usec)
<7>[ 53.701199] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 103 (103.0 usec)
<7>[ 53.701273] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 103 (103.0 usec)
<7>[ 53.701346] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 103 (103.0 usec)
<7>[ 53.701417] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 96 (96.0 usec)
<7>[ 53.701488] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 103 (103.0 usec)
<7>[ 53.704186] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 53.704321] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 53.704440] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 53.704554] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 53.704664] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 53.704790] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7>[ 53.704905] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 53.705009] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 53.705159] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 53.705322] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 53.705490] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 53.705652] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 53.705840] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 53.705991] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7>[ 53.706144] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 53.706287] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 53.706427] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 53.706566] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 53.706702] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 53.706853] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 53.706986] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 53.707118] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7>[ 53.707254] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 53.707378] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 53.707500] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 53.707621] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 53.707747] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 53.707875] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 53.707994] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 53.708118] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<7>[ 53.709876] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[ 53.713335] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 53.713503] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 53.713662] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[ 53.713916] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 53.714137] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[ 53.714371] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 53.714526] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 53.714677] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 53.714849] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 53.714999] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 53.715146] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 53.715287] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 53.715423] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 53.715554] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 53.715758] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 53.716309] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 53.716449] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 53.716585] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 53.716712] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 53.716853] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 53.717131] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 53.717447] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 53.718781] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 53.719093] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<6>[ 53.719245] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7>[ 53.720924] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 53.721541] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 53.722364] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e
<7>[ 53.723762] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 53.724289] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 53.726363] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 53.735746] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 53.735755] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 53.735757] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.735759] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 53.735761] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.735763] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 53.735767] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.735769] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 53.735771] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 53.735812] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 53.735813] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 53.735814] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.735822] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 53.736365] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[ 53.736891] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 53.736999] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[ 53.737132] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 53.737253] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 53.737376] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 53.737459] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 53.737542] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 53.737622] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 53.737702] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 53.737832] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 53.738043] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 53.738222] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 53.738336] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 53.738632] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 53.738758] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 53.738893] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 53.739131] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 53.739244] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 53.739345] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 53.739742] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 53.739885] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 53.740022] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 53.740106] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 53.740189] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 53.740270] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 53.740351] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 53.740431] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 53.740508] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 53.740581] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 53.740656] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 53.740745] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 53.740840] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 53.740935] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 53.741027] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 53.741102] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 53.741178] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 53.741247] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 53.741317] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 53.741388] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 53.741457] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 53.742224] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 53.742329] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 53.742405] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 53.742482] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 53.742542] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[ 53.742601] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[ 53.742660] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[ 53.742735] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 53.742813] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 53.742884] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[ 53.742951] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[ 53.743016] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[ 53.743084] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 53.743152] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 53.743212] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[ 53.743276] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[ 53.743339] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[ 53.743425] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[ 53.743502] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[ 53.743579] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[ 53.743657] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[ 53.743802] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[ 53.743871] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 53.743936] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 53.744001] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 53.744064] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 53.744126] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 53.744188] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 53.744283] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 53.744347] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 53.744408] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 53.744467] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 53.744524] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 53.744589] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 53.744654] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7>[ 53.744760] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 53.744839] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 53.744916] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 53.744990] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 53.745060] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 53.745121] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 53.745179] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7>[ 53.745301] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[ 53.745397] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A
<7>[ 53.745588] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 53.745688] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 53.745787] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 53.745873] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 53.745957] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 53.746039] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 53.746120] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 53.746195] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 53.746267] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 53.746341] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 53.746418] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 53.746494] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 53.746571] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 53.746646] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 53.746726] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 53.746800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0
<7>[ 53.746873] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96
<7>[ 53.746947] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906
<7>[ 53.747021] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 53.747096] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 53.747173] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 53.747250] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 53.747325] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 53.747399] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 53.747467] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 53.747534] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 53.747600] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 53.747671] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 53.747747] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 53.747815] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 53.747883] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 53.747950] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 53.748016] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.748081] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.748143] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.748204] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 53.748268] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 53.748332] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.748400] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.748468] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.748535] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 53.748601] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 53.748666] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 53.748896] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 53.748996] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 53.749088] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 53.749338] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 53.749433] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[ 53.784810] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<7>[ 53.856833] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<6>[ 53.986883] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 53.986887] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 53.986888] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 53.986977] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[ 53.987073] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 53.987159] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 53.987229] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 53.987314] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[ 53.987391] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[ 53.987477] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[ 53.987536] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 53.987595] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 53.987652] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 53.988494] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 53.988558] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 53.988621] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 53.988682] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 53.988746] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 53.988806] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 53.988867] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 53.988940] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 53.989010] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 53.989074] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 53.989138] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 53.989198] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 53.989257] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 53.989315] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 53.989371] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 53.989427] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 53.989482] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 53.989537] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 53.989591] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 53.989645] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 53.989700] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 53.989764] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 53.989827] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 53.989885] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 53.989952] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 53.990015] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 53.990082] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 53.990150] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 53.990214] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[ 53.990272] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[ 53.990326] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[ 53.990381] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 53.990436] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 53.990491] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 53.990548] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 53.990604] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 53.990663] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 53.990727] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 53.991052] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 53.991125] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 53.991187] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 53.991371] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 53.991428] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 53.991480] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 53.991714] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 53.991781] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7>[ 53.991846] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 53.991908] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[ 53.991966] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[ 53.992020] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[ 53.992360] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 53.992425] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[ 53.992485] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[ 53.992542] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 53.992599] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 53.992655] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 53.992712] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 53.992783] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 53.992847] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 53.992908] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 53.992973] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 53.993039] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 53.993101] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 53.993159] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 53.993226] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 53.993394] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 53.995838] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[ 54.008842] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[ 54.009663] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 54.009742] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 54.018951] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 54.019313] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 54.020105] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 54.020187] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 54.020264] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[ 54.020333] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 54.020405] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ca18000
<7>[ 54.020471] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 54.020534] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 54.020596] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 54.020659] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 54.023012] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 54.023083] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7>[ 54.023150] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 54.025144] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 54.028372] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 54.028376] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 54.028377] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 54.028378] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 54.028379] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 54.028379] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 54.028380] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 54.028381] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 54.028382] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 54.028383] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 54.028406] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[ 54.028541] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[ 54.028645] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[ 54.029263] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 54.029355] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 54.029448] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 54.029535] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 54.029617] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 54.029699] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 54.029792] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 54.029879] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 54.029965] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 54.030047] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 54.030125] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 54.030201] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 54.030276] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 54.030350] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 54.030425] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 54.030499] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 54.030572] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 54.030649] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 54.030726] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 54.030799] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 54.030872] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 54.030946] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 54.031021] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 54.031093] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 54.031167] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 54.031239] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 54.031323] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 54.031998] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 54.032087] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 54.032444] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 54.032537] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 54.033078] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 54.033178] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 54.033274] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[ 54.033366] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 54.033455] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 54.033542] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 54.033627] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 54.033707] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 54.033806] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 54.033884] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 54.033961] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 54.034037] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 54.034112] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 54.034184] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 54.034277] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 54.034390] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 54.052113] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[ 54.053189] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 54.053410] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 54.073045] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 54.073486] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 54.074824] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 54.077250] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 54.079612] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 54.122775] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 54.125279] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 54.125895] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 54.126335] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0
<7>[ 54.126752] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 54.127097] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 54.127509] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 54.127937] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 54.128378] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 54.128764] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 54.130826] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 54.131381] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 54.131767] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 54.140519] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 54.153515] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[ 54.159668] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[ 54.160642] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 54.164220] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[ 54.164365] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[ 54.165143] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 54.166283] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[ 54.166346] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[ 54.166961] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 54.167855] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[ 54.167904] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[ 54.168379] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 54.169252] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[ 54.169286] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 54.169341] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 54.177314] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 54.179831] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 54.180773] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 54.180902] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 54.181907] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[ 54.182016] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[ 54.182100] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[ 54.182175] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[ 54.182328] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 54.182501] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 54.182515] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 54.183157] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 54.183675] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 54.183804] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 54.183914] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 54.184160] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 54.184166] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.184168] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.184169] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 54.184172] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.184174] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 54.184179] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.184180] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 54.184183] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.184208] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 54.184324] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 54.184983] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 54.185072] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 54.186048] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<5>[ 54.186243] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.186244] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.186246] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.186280] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 54.186292] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 54.186303] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 54.186313] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 54.186452] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 54.186558] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected
<7>[ 54.186566] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 54.186574] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 54.186580] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 54.186692] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 54.186816] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected
<7>[ 54.186825] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 54.186833] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 54.186841] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 54.186973] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 54.187078] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected
<7>[ 54.187084] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 54.187090] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 54.187093] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 54.187095] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 54.187096] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 54.187152] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 54.187161] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 54.187163] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 54.187165] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 54.187167] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 54.187175] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 54.187313] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 54.187349] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 54.187372] xe 0000:00:02.0: [drm:intelfb_create [xe]] no BIOS fb, allocating a new one
<7>[ 54.187544] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 54.187667] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 54.187945] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 54.194736] xe 0000:00:02.0: [drm:intelfb_create [xe]] allocated 2880x1800 fb: 0x01d94000
<6>[ 54.195502] fbcon: xedrmfb (fb0) is primary device
<7>[ 54.197314] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 54.197507] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 54.197604] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 54.197703] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 54.197826] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 54.197945] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 54.198055] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 54.198145] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 54.198235] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 54.198320] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 54.198405] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 54.198486] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 54.198567] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 54.198646] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 54.198729] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 54.198824] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 54.198925] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 54.199025] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 54.199107] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 54.199186] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 54.199261] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 54.199336] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 54.199410] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 54.199484] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 54.199558] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 54.199631] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 54.199704] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 54.199795] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 54.199893] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 54.200000] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 54.200096] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 54.200216] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 54.200305] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 54.200385] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 3, 1 -> 2, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 54.200460] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 25, 25, 25, 25, 25, 25, 0, 0, 7, 73, 7 -> 49, 289, 289, 289, 265, 289, 0, 0, 63, 73, 87
<7>[ 54.200533] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 319, 319, 319, 293, 319, 0, 0, 64, 82, 88
<7>[ 54.200604] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 54.200673] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.200754] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.200844] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.200940] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 54.201041] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.201136] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.201212] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.201284] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 54.201355] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.201425] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.201505] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.201577] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 54.201649] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.201724] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.201806] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.201887] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 54.201966] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.202047] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.202126] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.202195] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[ 54.202291] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 54.202384] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 54.202475] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 54.202565] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 54.202656] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 54.202796] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 54.202936] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 54.203053] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 54.203156] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 54.203256] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 54.203338] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 54.203419] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 54.203498] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 54.203576] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 54.203653] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 54.203729] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 54.203819] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 54.203910] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 54.204000] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 54.204078] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 54.204147] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 54.204214] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 54.204280] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 54.204345] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 54.204411] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 54.204476] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 54.204542] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 54.204612] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[ 54.204681] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 2859, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7>[ 54.204763] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 2753, vmin vtotal: 1906, vmax vtotal: 2859
<7>[ 54.204852] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 54.204940] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 54.205027] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 54.205097] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 54.205171] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 54.205242] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 54.205311] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 54.205376] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 54.205436] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 54.205497] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 54.205561] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 54.205626] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 54.205691] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 54.205772] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 54.205856] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.205941] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.206025] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.206108] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 54.206184] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 54.206252] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.206319] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.206383] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.206446] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 54.206511] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 54.206576] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 54.206634] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 54.206693] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 54.206765] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 54.206846] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 54.206926] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 54.207006] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[ 54.228015] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<6>[ 54.229189] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 54.229888] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[ 54.252787] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 54.432960] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[ 54.434288] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 54.444525] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 54.444790] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 54.445239] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 54.445521] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 54.445825] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 54.498185] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 54.498547] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 54.527767] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 54.528238] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 54.528279] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 54.529375] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 54.529398] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 54.529805] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[ 54.530210] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 54.530537] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[ 54.530894] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[ 54.531208] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[ 54.531514] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 54.531910] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[ 54.532216] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[ 54.532509] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[ 54.532821] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 54.533107] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[ 54.533419] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[ 54.533503] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 54.533702] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[ 54.533912] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 54.534037] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 54.534302] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 54.534705] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 54.535497] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 54.535857] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (493 ms remaining)
<7>[ 54.657101] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 55.033003] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7>[ 55.073788] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 55.074146] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 55.074448] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 55.110851] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 55.111181] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 55.111443] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 55.111761] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 55.249588] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 55.249672] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 55.249796] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 55.386038] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 55.388310] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 55.388752] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 55.392377] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 55.393692] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 55.394986] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 55.396268] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 55.397462] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 55.398897] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 55.399268] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 55.401208] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 55.401681] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 55.402613] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 55.403258] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 55.403685] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 55.404164] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[ 55.406404] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 55.406422] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 55.406755] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 55.421024] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 55.423532] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[ 55.424073] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[ 55.425646] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 55.428388] Console: switching to colour frame buffer device 180x56
<6>[ 55.441883] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 55.460110] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 55.460167] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 55.459912] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 55.460447] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 55.460822] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 55.461064] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 55.461116] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 55.461184] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 55.461526] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 55.461879] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 55.462220] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 55.462500] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 55.462793] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 55.463109] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 55.463381] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 55.463644] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 55.463703] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 55.463940] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 55.464211] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 55.464462] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 55.464709] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 55.465009] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 55.465088] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 55.465334] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 55.465492] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 55.465607] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 55.465930] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 55.465911] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 55.466194] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 55.466458] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 55.466617] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 55.466634] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 55.466639] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 55.466644] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 55.466653] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 55.466658] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 55.466674] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 55.466679] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 55.466687] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 55.466732] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 55.466766] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 55.467092] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 55.467158] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 55.467510] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 55.467987] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[ 55.468509] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 55.469802] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 55.470279] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 55.470335] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[ 55.471821] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 55.472355] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 55.472804] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<5>[ 55.473858] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 55.473869] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 55.473874] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 55.473999] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 55.474124] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 55.474163] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 55.474197] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 55.474759] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 55.475201] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 55.475240] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 55.475274] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 55.475801] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 55.476212] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 55.476246] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 55.476275] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 55.476796] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 55.477207] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 55.477239] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 55.477255] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 55.477266] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 55.477277] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 55.477584] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 55.477629] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 55.477639] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 55.477648] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 55.477657] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 55.477717] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 55.478681] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7>[ 55.483441] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 55.485324] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[ 55.487659] xe 0000:00:02.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<6>[ 55.527534] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[ 55.529139] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7>[ 55.529281] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[ 55.529583] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 55.537263] xe 0000:00:02.0: [drm:drm_client_dev_restore] intel-fbdev: ret=0
<7>[ 55.537355] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 55.537404] [IGT] xe_module_load: exiting, ret=0
<7>[ 55.568747] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 55.568935] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 55.569123] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 55.569278] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 55.569428] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 55.569574] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 55.569908] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 55.570050] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 55.570186] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 55.570323] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 55.570458] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 55.570593] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 55.570733] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 55.570866] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 55.570992] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 55.571117] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 55.571240] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 55.571363] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 55.571503] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 55.571649] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 55.571786] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 55.571905] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 55.572023] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 55.572139] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 55.572254] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 55.572369] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 55.572484] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 55.572600] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 55.572714] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 55.573125] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 55.573199] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 55.573262] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 55.573324] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 55.573384] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 55.573445] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 55.573505] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<6>[ 55.582127] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<7>[ 55.586209] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 55.586358] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 55.586478] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<6>[ 55.586714] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 55.587341] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 55.589065] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 55.607546] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[ 55.607684] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<7>[ 56.529063] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 56.529119] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 56.529254] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 56.640418] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 58.002084] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 58.002431] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067