<5>[ 0.000000] Linux version 6.14.0-rc4-xe+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Thu Feb 27 16:24:06 UTC 2025
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel,ast ro
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001053fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000105400000-0x000000087f7fffff] usable
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x68f86018 ESRT=0x68f97a98 MOKvar=0x6cd0c000
<6>[ 0.000000] efi: Remove mem277: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem279: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D97.2411281331 11/28/2024
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000013] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000017] MTRR map: 10 entries (3 fixed + 7 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000376] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000377] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004667] esrt: Reserving ESRT space from 0x0000000068f97a98 to 0x0000000068f97be8.
<7>[ 0.004675] e820: update [mem 0x68f97000-0x68f97fff] usable ==> reserved
<6>[ 0.004693] Using GB pages for direct mapping
<6>[ 0.005326] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[ 0.005327] printk: early log buf free: 258912(98%)
<6>[ 0.005327] Secure boot disabled
<6>[ 0.005329] ACPI: Early table checksum verification disabled
<6>[ 0.005332] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.005334] ACPI: XSDT 0x000000006FF7C228 00019C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005338] ACPI: FACP 0x000000006FFAB000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.005341] ACPI: DSDT 0x000000006FFB7000 025212 (v02 INTEL LNL 00000002 01000013)
<6>[ 0.005343] ACPI: FACS 0x000000006FEF1000 000040
<6>[ 0.005344] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.005346] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.005347] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.005348] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.005350] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.005351] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.005352] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.005353] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.005355] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.005356] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.005357] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.005359] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.005360] ACPI: SSDT 0x000000006FFE8000 002460 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.005361] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.005363] ACPI: SSDT 0x000000006FFDE000 008F36 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.005364] ACPI: SSDT 0x000000006FFDD000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.005365] ACPI: SSDT 0x000000006FFB2000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.005366] ACPI: SSDT 0x000000006FFB0000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.005368] ACPI: SSDT 0x000000006FFAC000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.005369] ACPI: HPET 0x000000006FFAA000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005370] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005371] ACPI: APIC 0x000000006FFA8000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.005373] ACPI: MCFG 0x000000006FFA7000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005374] ACPI: SSDT 0x000000006FFA6000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.005375] ACPI: SSDT 0x000000006FFA0000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.005377] ACPI: SSDT 0x000000006FF95000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.005378] ACPI: LPIT 0x000000006FF94000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005379] ACPI: SSDT 0x000000006FF93000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.005380] ACPI: SSDT 0x000000006FF92000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.005382] ACPI: DBGP 0x000000006FF91000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005383] ACPI: DBG2 0x000000006FF90000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005384] ACPI: NHLT 0x000000006FF8F000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005385] ACPI: SSDT 0x000000006FF8D000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.005387] ACPI: SSDT 0x000000006FF86000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.005388] ACPI: ECDT 0x000000006FF85000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.005389] ACPI: DMAR 0x000000006FF84000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005390] ACPI: FPDT 0x000000006FF83000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005392] ACPI: SSDT 0x000000006FF82000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.005393] ACPI: SSDT 0x000000006FF80000 001122 (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.005394] ACPI: SSDT 0x000000006FF7D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.005396] ACPI: SDEV 0x000000006FFA9000 000046 (v01 00000000 00000000)
<6>[ 0.005397] ACPI: SSDT 0x000000006FF71000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.005398] ACPI: SSDT 0x000000006FF63000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.005400] ACPI: ASF! 0x000000006FF62000 000074 (v32 INTEL LNL 00000002 01000013)
<6>[ 0.005401] ACPI: PHAT 0x000000006FF61000 0006E0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.005402] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005403] ACPI: Reserving FACP table memory at [mem 0x6ffab000-0x6ffab113]
<6>[ 0.005404] ACPI: Reserving DSDT table memory at [mem 0x6ffb7000-0x6ffdc211]
<6>[ 0.005404] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f]
<6>[ 0.005405] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.005405] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.005405] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.005406] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.005406] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.005406] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.005407] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.005407] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.005407] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.005407] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.005408] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.005408] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.005408] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea45f]
<6>[ 0.005408] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.005409] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe6f35]
<6>[ 0.005409] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0df]
<6>[ 0.005409] ACPI: Reserving SSDT table memory at [mem 0x6ffb2000-0x6ffb6ac2]
<6>[ 0.005410] ACPI: Reserving SSDT table memory at [mem 0x6ffb0000-0x6ffb140e]
<6>[ 0.005410] ACPI: Reserving SSDT table memory at [mem 0x6ffac000-0x6ffaf955]
<6>[ 0.005410] ACPI: Reserving HPET table memory at [mem 0x6ffaa000-0x6ffaa037]
<6>[ 0.005410] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.005411] ACPI: Reserving APIC table memory at [mem 0x6ffa8000-0x6ffa80d7]
<6>[ 0.005411] ACPI: Reserving MCFG table memory at [mem 0x6ffa7000-0x6ffa703b]
<6>[ 0.005411] ACPI: Reserving SSDT table memory at [mem 0x6ffa6000-0x6ffa66e2]
<6>[ 0.005411] ACPI: Reserving SSDT table memory at [mem 0x6ffa0000-0x6ffa5320]
<6>[ 0.005412] ACPI: Reserving SSDT table memory at [mem 0x6ff95000-0x6ff9f469]
<6>[ 0.005412] ACPI: Reserving LPIT table memory at [mem 0x6ff94000-0x6ff940cb]
<6>[ 0.005412] ACPI: Reserving SSDT table memory at [mem 0x6ff93000-0x6ff93d5b]
<6>[ 0.005413] ACPI: Reserving SSDT table memory at [mem 0x6ff92000-0x6ff921ef]
<6>[ 0.005413] ACPI: Reserving DBGP table memory at [mem 0x6ff91000-0x6ff91033]
<6>[ 0.005413] ACPI: Reserving DBG2 table memory at [mem 0x6ff90000-0x6ff90053]
<6>[ 0.005414] ACPI: Reserving NHLT table memory at [mem 0x6ff8f000-0x6ff8f2e2]
<6>[ 0.005414] ACPI: Reserving SSDT table memory at [mem 0x6ff8d000-0x6ff8e15b]
<6>[ 0.005414] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff8c53a]
<6>[ 0.005414] ACPI: Reserving ECDT table memory at [mem 0x6ff85000-0x6ff85068]
<6>[ 0.005415] ACPI: Reserving DMAR table memory at [mem 0x6ff84000-0x6ff840d7]
<6>[ 0.005415] ACPI: Reserving FPDT table memory at [mem 0x6ff83000-0x6ff83043]
<6>[ 0.005415] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff8286c]
<6>[ 0.005416] ACPI: Reserving SSDT table memory at [mem 0x6ff80000-0x6ff81121]
<6>[ 0.005416] ACPI: Reserving SSDT table memory at [mem 0x6ff7d000-0x6ff7f462]
<6>[ 0.005416] ACPI: Reserving SDEV table memory at [mem 0x6ffa9000-0x6ffa9045]
<6>[ 0.005416] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff7b4f9]
<6>[ 0.005417] ACPI: Reserving SSDT table memory at [mem 0x6ff63000-0x6ff70815]
<6>[ 0.005417] ACPI: Reserving ASF! table memory at [mem 0x6ff62000-0x6ff62073]
<6>[ 0.005417] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff616df]
<6>[ 0.005418] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037]
<6>[ 0.005482] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005685] No NUMA configuration found
<6>[ 0.005685] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005690] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<6>[ 0.005800] Zone ranges:
<6>[ 0.005800] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 0.005801] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 0.005802] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 0.005802] Device empty
<6>[ 0.005803] Movable zone start for each node
<6>[ 0.005804] Early memory node ranges
<6>[ 0.005804] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 0.005805] node 0: [mem 0x0000000000100000-0x000000006cac0fff]
<6>[ 0.005805] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 0.005805] node 0: [mem 0x0000000105400000-0x000000087f7fffff]
<6>[ 0.005807] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 0.005811] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.005828] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 0.007847] On node 0, zone DMA32: 13630 pages in unavailable ranges
<6>[ 0.036444] On node 0, zone Normal: 21504 pages in unavailable ranges
<6>[ 0.036507] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 0.036980] ACPI: PM-Timer IO Port: 0x1808
<6>[ 0.036986] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 0.037037] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 0.037039] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.037041] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 0.037043] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 0.037044] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 0.037055] e820: update [mem 0x68f42000-0x68f5cfff] usable ==> reserved
<6>[ 0.037061] TSC deadline timer available
<6>[ 0.037063] CPU topo: Max. logical packages: 1
<6>[ 0.037063] CPU topo: Max. logical dies: 1
<6>[ 0.037063] CPU topo: Max. dies per package: 1
<6>[ 0.037065] CPU topo: Max. threads per core: 1
<6>[ 0.037065] CPU topo: Num. cores per package: 8
<6>[ 0.037066] CPU topo: Num. threads per package: 8
<6>[ 0.037066] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 0.037078] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 0.037079] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 0.037080] PM: hibernation: Registered nosave memory: [mem 0x68f42000-0x68f5cfff]
<6>[ 0.037081] PM: hibernation: Registered nosave memory: [mem 0x68f97000-0x68f97fff]
<6>[ 0.037082] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fe67fff]
<6>[ 0.037082] PM: hibernation: Registered nosave memory: [mem 0x6fe68000-0x6ff4ffff]
<6>[ 0.037082] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 0.037083] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 0.037083] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 0.037084] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 0.037084] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 0.037084] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1053fffff]
<6>[ 0.037086] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 0.037087] Booting paravirtualized kernel on bare hardware
<6>[ 0.037089] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 0.037097] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 0.037431] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 0.037435] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 0.037436] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 0.037449] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel,ast ro
<5>[ 0.037532] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 0.037545] random: crng init done
<6>[ 0.039390] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 0.040319] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 0.040374] Fallback order for Node 0: 0
<6>[ 0.040377] Built 1 zonelists, mobility grouping on. Total pages: 8285792
<6>[ 0.040377] Policy zone: Normal
<6>[ 0.040386] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[ 0.040387] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 0.040389] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 0.041323] software IO TLB: area num 8.
<4>[ 0.086841] **********************************************************
<4>[ 0.086843] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.086843] ** **
<4>[ 0.086843] ** This system shows unhashed kernel memory addresses **
<4>[ 0.086843] ** via the console, logs, and other interfaces. This **
<4>[ 0.086844] ** might reduce the security of your system. **
<4>[ 0.086844] ** **
<4>[ 0.086844] ** If you see this message and you are not debugging **
<4>[ 0.086844] ** the kernel, report this immediately to your system **
<4>[ 0.086844] ** administrator! **
<4>[ 0.086844] ** **
<4>[ 0.086845] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.086845] **********************************************************
<6>[ 0.087913] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 0.088237] ftrace: allocating 59524 entries in 233 pages
<6>[ 0.113661] ftrace: allocated 233 pages with 5 groups
<6>[ 0.114858] Dynamic Preempt: voluntary
<6>[ 0.115306] Running RCU self tests
<6>[ 0.115307] Running RCU synchronous self tests
<6>[ 0.115307] rcu: Preemptible hierarchical RCU implementation.
<6>[ 0.115308] rcu: RCU lockdep checking is enabled.
<6>[ 0.115308] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 0.115309] Trampoline variant of Tasks RCU enabled.
<6>[ 0.115309] Rude variant of Tasks RCU enabled.
<6>[ 0.115309] Tracing variant of Tasks RCU enabled.
<6>[ 0.115310] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 0.115310] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 0.115349] Running RCU synchronous self tests
<6>[ 0.115353] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.115356] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.115358] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.125446] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 0.125898] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 0.126235] Console: colour dummy device 80x25
<6>[ 0.126243] printk: legacy console [tty0] enabled
<6>[ 0.127443] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[ 0.127451] ... MAX_LOCKDEP_SUBCLASSES: 8
<6>[ 0.127454] ... MAX_LOCK_DEPTH: 48
<6>[ 0.127458] ... MAX_LOCKDEP_KEYS: 8192
<6>[ 0.127462] ... CLASSHASH_SIZE: 4096
<6>[ 0.127465] ... MAX_LOCKDEP_ENTRIES: 524288
<6>[ 0.127469] ... MAX_LOCKDEP_CHAINS: 524288
<6>[ 0.127472] ... CHAINHASH_SIZE: 262144
<6>[ 0.127476] memory used by lock dependency info: 54145 kB
<6>[ 0.127480] memory used for stack traces: 4224 kB
<6>[ 0.127484] per task-struct memory footprint: 1920 bytes
<6>[ 0.127535] ACPI: Core revision 20240827
<6>[ 0.128392] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 0.128456] APIC: Switch to symmetric I/O mode setup
<6>[ 0.128463] DMAR: Host address width 38
<6>[ 0.128466] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 0.128500] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.128535] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 0.128555] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.128580] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 0.128601] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[ 0.128635] DMAR: SATC flags: 0x1
<6>[ 0.128643] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 0.128649] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 0.128654] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 0.130718] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 0.135878] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 0.135897] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[ 0.135969] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.135975] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 0.136147] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 0.136152] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 0.136161] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 0.136169] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 0.136173] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 0.136180] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 0.136187] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 0.136203] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 0.136209] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 0.136214] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 0.136218] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 0.136224] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 0.136230] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 0.136235] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 0.136240] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 0.136245] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 0.136891] Freeing SMP alternatives memory: 48K
<6>[ 0.136891] pid_max: default: 32768 minimum: 301
<6>[ 0.136891] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 0.136891] landlock: Up and running.
<6>[ 0.136891] Yama: becoming mindful.
<6>[ 0.136891] AppArmor: AppArmor initialized
<6>[ 0.136891] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.136891] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.136891] Running RCU synchronous self tests
<6>[ 0.136891] Running RCU synchronous self tests
<6>[ 0.136891] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 0.136891] Running RCU Tasks wait API self tests
<6>[ 0.136891] Running RCU Tasks Rude wait API self tests
<6>[ 0.136891] Running RCU Tasks Trace wait API self tests
<6>[ 0.136891] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 0.136891] core: cpu_core PMU driver:
<6>[ 0.136891] ... version: 6
<6>[ 0.136891] ... bit width: 48
<6>[ 0.136891] ... generic registers: 10
<6>[ 0.136891] ... value mask: 0000ffffffffffff
<6>[ 0.136891] ... max period: 00007fffffffffff
<6>[ 0.136896] ... fixed-purpose events: 4
<6>[ 0.136899] ... event mask: 0001000f000003ff
<6>[ 0.136931] signal: max sigframe size: 3632
<6>[ 0.136953] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 0.137032] rcu: Hierarchical SRCU implementation.
<6>[ 0.137037] rcu: Max phase no-delay instances is 400.
<6>[ 0.137965] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 0.139784] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 0.140076] smp: Bringing up secondary CPUs ...
<6>[ 0.140425] smpboot: x86: Booting SMP configuration:
<6>[ 0.140431] .... node #0, CPUs: #1 #2
<6>[ 0.143017] Callback from call_rcu_tasks_trace() invoked.
<4>[ 0.145968] #3 #4 #5 #6 #7
<6>[ 0.010807] core: cpu_atom PMU driver:
<6>[ 0.010807] ... version: 6
<6>[ 0.010807] ... bit width: 48
<6>[ 0.010807] ... generic registers: 8
<6>[ 0.010807] ... value mask: 0000ffffffffffff
<6>[ 0.010807] ... max period: 00007fffffffffff
<6>[ 0.010807] ... fixed-purpose events: 6
<6>[ 0.010807] ... event mask: 00000077000000ff
<6>[ 0.157033] smp: Brought up 1 node, 8 CPUs
<6>[ 0.157110] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 0.159057] Memory: 32344912K/33143168K available (24514K kernel code, 5579K rwdata, 9272K rodata, 5632K init, 68400K bss, 775236K reserved, 0K cma-reserved)
<6>[ 0.160369] devtmpfs: initialized
<6>[ 0.160369] x86/mm: Memory block size: 128MB
<6>[ 0.176284] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes)
<6>[ 0.177009] Running RCU synchronous self tests
<6>[ 0.177022] Running RCU synchronous self tests
<6>[ 0.177038] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.177038] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 0.177218] pinctrl core: initialized pinctrl subsystem
<6>[ 0.177892] PM: RTC time: 20:01:56, date: 2025-02-27
<6>[ 0.178740] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 0.179801] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 0.180100] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 0.180385] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 0.180456] audit: initializing netlink subsys (disabled)
<5>[ 0.180493] audit: type=2000 audit(1740686516.044:1): state=initialized audit_enabled=0 res=1
<6>[ 0.181563] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 0.181565] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 0.181572] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 0.181577] thermal_sys: Registered thermal governor 'user_space'
<6>[ 0.181582] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 0.181629] EISA bus registered
<6>[ 0.181657] cpuidle: using governor ladder
<6>[ 0.181657] cpuidle: using governor menu
<6>[ 0.182012] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 0.182408] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 0.182437] PCI: Using configuration type 1 for base access
<6>[ 0.182588] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 0.184024] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 0.184024] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 0.184024] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 0.184024] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 0.205892] raid6: avx2x4 gen() 37494 MB/s
<6>[ 0.222893] raid6: avx2x2 gen() 82952 MB/s
<6>[ 0.239897] raid6: avx2x1 gen() 70847 MB/s
<6>[ 0.239901] raid6: using algorithm avx2x2 gen() 82952 MB/s
<6>[ 0.256892] raid6: .... xor() 52681 MB/s, rmw enabled
<6>[ 0.256897] raid6: using avx2x2 recovery algorithm
<6>[ 0.260458] fbcon: Taking over console
<6>[ 0.261736] ACPI: Added _OSI(Module Device)
<6>[ 0.261789] ACPI: Added _OSI(Processor Device)
<6>[ 0.261834] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.261878] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 0.752671] ACPI: 31 ACPI AML tables successfully acquired and loaded
<6>[ 0.766145] ACPI: EC: EC started
<6>[ 0.766157] ACPI: EC: interrupt blocked
<6>[ 0.768507] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 0.768512] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 0.795394] Callback from call_rcu_tasks() invoked.
<6>[ 1.026550] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.026563] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.053600] ACPI: Interpreter enabled
<6>[ 1.053689] ACPI: PM: (supports S0 S4 S5)
<6>[ 1.053694] ACPI: Using IOAPIC for interrupt routing
<6>[ 1.058874] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 1.058881] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 1.077478] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 1.077527] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 1.118137] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 1.118412] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 1.121459] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 1.325494] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 1.338670] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 1.476355] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 1.477930] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 1.486220] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 1.517050] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 1.517732] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 1.518404] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 1.595359] ACPI: \: Can't tag data node
<3>[ 1.596509] ACPI: \: Can't tag data node
<3>[ 1.597966] ACPI: \: Can't tag data node
<3>[ 1.599017] ACPI: \: Can't tag data node
<3>[ 1.600136] ACPI: \: Can't tag data node
<6>[ 1.873911] ACPI: \_TZ_.FN00: New power resource
<6>[ 1.875251] ACPI: \_TZ_.FN01: New power resource
<6>[ 1.876566] ACPI: \_TZ_.FN02: New power resource
<6>[ 1.878282] ACPI: \_TZ_.FN03: New power resource
<6>[ 1.879564] ACPI: \_TZ_.FN04: New power resource
<6>[ 1.883562] ACPI: \PIN_: New power resource
<6>[ 1.892008] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 1.892029] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 1.895710] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC]
<6>[ 1.908464] PCI host bridge to bus 0000:00
<6>[ 1.908496] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 1.908504] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 1.908511] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 1.908518] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 1.908525] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 1.908533] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 1.911742] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 1.912313] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 1.912404] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 1.912413] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 1.912422] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 1.912466] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 1.913684] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 1.913713] pci 0000:00:04.0: BAR 0 [mem 0x3815c00000-0x3815c1ffff 64bit]
<6>[ 1.914871] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 1.914925] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 1.914933] pci 0000:00:05.0: BAR 4 [mem 0x3815c7b000-0x3815c7bfff 64bit]
<6>[ 1.915811] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 1.915853] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 1.915865] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 1.915884] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 1.916011] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 1.916065] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 1.920448] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 1.920497] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 1.920510] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 1.920528] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 1.920644] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 1.920700] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 1.924875] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 1.924917] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 1.924929] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 1.924947] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 1.925079] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 1.925128] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 1.929505] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 1.929542] pci 0000:00:0a.0: BAR 0 [mem 0x3815c50000-0x3815c5ffff 64bit]
<6>[ 1.929556] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 1.929751] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 1.929780] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 1.929787] pci 0000:00:0b.0: BAR 4 [mem 0x3815c7a000-0x3815c7afff 64bit]
<6>[ 1.930177] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 1.930230] pci 0000:00:0d.0: BAR 0 [mem 0x3815c40000-0x3815c4ffff 64bit]
<6>[ 1.930302] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 1.932154] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 1.932207] pci 0000:00:0d.2: BAR 0 [mem 0x3815bc0000-0x3815bfffff 64bit]
<6>[ 1.932215] pci 0000:00:0d.2: BAR 2 [mem 0x3815c79000-0x3815c79fff 64bit]
<6>[ 1.932273] pci 0000:00:0d.2: supports D1 D2
<6>[ 1.932276] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 1.933472] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 1.933525] pci 0000:00:0d.3: BAR 0 [mem 0x3815b80000-0x3815bbffff 64bit]
<6>[ 1.933533] pci 0000:00:0d.3: BAR 2 [mem 0x3815c78000-0x3815c78fff 64bit]
<6>[ 1.933590] pci 0000:00:0d.3: supports D1 D2
<6>[ 1.933594] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 1.934837] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 1.934917] pci 0000:00:12.0: BAR 0 [mem 0x3815c30000-0x3815c3ffff 64bit]
<6>[ 1.934985] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 1.937542] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 1.937635] pci 0000:00:13.0: BAR 0 [mem 0x3815c77000-0x3815c77fff 64bit]
<6>[ 1.937738] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 1.938130] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 1.938183] pci 0000:00:14.0: BAR 0 [mem 0x3815c20000-0x3815c2ffff 64bit]
<6>[ 1.938251] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 1.940326] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 1.940390] pci 0000:00:14.2: BAR 0 [mem 0x3815c68000-0x3815c6ffff 64bit]
<6>[ 1.940399] pci 0000:00:14.2: BAR 2 [mem 0x3815c76000-0x3815c76fff 64bit]
<6>[ 1.940690] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 1.940801] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 1.942246] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 1.942353] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 1.944145] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 1.944255] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 1.945602] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 1.945713] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 1.947217] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 1.947308] pci 0000:00:16.0: BAR 0 [mem 0x3815c71000-0x3815c71fff 64bit]
<6>[ 1.947402] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 1.949735] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint
<6>[ 1.949810] pci 0000:00:16.3: BAR 0 [io 0x4020-0x4027]
<6>[ 1.949816] pci 0000:00:16.3: BAR 1 [mem 0x94421000-0x94421fff]
<6>[ 1.950059] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[ 1.950093] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 1.950101] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 1.950108] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 1.950230] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 1.950287] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 1.954915] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 1.955023] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 1.955054] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 1.955392] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[ 1.955552] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[ 1.960696] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 1.962140] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 1.962254] pci 0000:00:1f.3: BAR 0 [mem 0x3815b00000-0x3815b7ffff 64bit]
<6>[ 1.962269] pci 0000:00:1f.3: BAR 4 [mem 0x3815800000-0x38159fffff 64bit]
<6>[ 1.962378] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 1.962783] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 1.962848] pci 0000:00:1f.4: BAR 0 [mem 0x3815c70000-0x3815c700ff 64bit]
<6>[ 1.962860] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 1.964381] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 1.964565] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 1.964784] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint
<6>[ 1.964846] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[ 1.964912] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 1.966001] pci 0000:00:1f.7: [8086:a824] type 00 class 0x130000 conventional PCI endpoint
<6>[ 1.966056] pci 0000:00:1f.7: BAR 0 [mem 0x3815a00000-0x3815afffff 64bit]
<6>[ 1.966064] pci 0000:00:1f.7: BAR 2 [mem 0x3815000000-0x38157fffff 64bit]
<6>[ 1.966072] pci 0000:00:1f.7: BAR 4 [mem 0x3815c60000-0x3815c67fff 64bit]
<6>[ 1.966383] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 1.966540] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 1.966697] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 1.966875] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[ 1.966947] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff]
<6>[ 1.966958] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[ 1.966967] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[ 1.967132] pci 0000:7f:00.0: supports D1 D2
<6>[ 1.967136] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 1.967689] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 1.968967] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 1.969383] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 1.969441] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 1.969987] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 1.970046] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.412670] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 12.458809] Low-power S0 idle used by default for system suspend
<6>[ 12.511080] ACPI: EC: interrupt unblocked
<6>[ 12.511090] ACPI: EC: event unblocked
<6>[ 12.511124] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 12.511131] ACPI: EC: GPE=0x6e
<6>[ 12.511136] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 12.511145] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 12.512152] iommu: Default domain type: Translated
<6>[ 12.512152] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 12.514650] SCSI subsystem initialized
<7>[ 12.515115] libata version 3.00 loaded.
<6>[ 12.515319] ACPI: bus type USB registered
<6>[ 12.515504] usbcore: registered new interface driver usbfs
<6>[ 12.515599] usbcore: registered new interface driver hub
<6>[ 12.515930] usbcore: registered new device driver usb
<6>[ 12.516264] pps_core: LinuxPPS API ver. 1 registered
<6>[ 12.516276] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 12.516329] PTP clock support registered
<6>[ 12.518058] EDAC MC: Ver: 3.0.0
<6>[ 12.520161] efivars: Registered efivars operations
<6>[ 12.523734] NetLabel: Initializing
<6>[ 12.523744] NetLabel: domain hash size = 128
<6>[ 12.523756] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 12.523939] NetLabel: unlabeled traffic allowed by default
<6>[ 12.523976] mctp: management component transport protocol core
<6>[ 12.523988] NET: Registered PF_MCTP protocol family
<6>[ 12.524064] PCI: Using ACPI for IRQ routing
<7>[ 12.548713] PCI: pci_cache_line_size set to 64 bytes
<6>[ 12.548919] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 12.549116] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 12.549144] e820: reserve RAM buffer [mem 0x68f42000-0x6bffffff]
<7>[ 12.549152] e820: reserve RAM buffer [mem 0x68f97000-0x6bffffff]
<7>[ 12.549159] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff]
<7>[ 12.549165] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 12.550109] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 12.550109] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 12.550109] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6>[ 12.550109] vgaarb: loaded
<6>[ 12.551154] clocksource: Switched to clocksource tsc-early
<5>[ 12.559744] VFS: Disk quotas dquot_6.6.0
<6>[ 12.559784] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 12.561115] AppArmor: AppArmor Filesystem Enabled
<6>[ 12.561388] pnp: PnP ACPI init
<6>[ 12.562748] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 12.562766] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 12.564712] system 00:02: [io 0x06a4] has been reserved
<6>[ 12.564727] system 00:02: [io 0x06a0] has been reserved
<6>[ 12.595872] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 12.595894] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 12.595917] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 12.595934] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 12.595948] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
<6>[ 12.595965] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 12.595980] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 12.595993] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 12.601398] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 12.605299] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 12.605535] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 12.614023] pnp: PnP ACPI: found 8 devices
<6>[ 12.627681] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 12.628054] NET: Registered PF_INET protocol family
<6>[ 12.628355] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 12.631596] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 12.631931] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 12.632275] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 12.633523] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 12.635605] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 12.636271] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 12.637991] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 12.639654] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 12.639774] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 12.639791] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 12.639806] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 12.639879] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 12.639890] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 12.639899] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]: assigned
<6>[ 12.639910] pci 0000:00:15.0: BAR 0 [mem 0x3815c72000-0x3815c72fff 64bit]: assigned
<6>[ 12.639965] pci 0000:00:15.1: BAR 0 [mem 0x3815c73000-0x3815c73fff 64bit]: assigned
<6>[ 12.640016] pci 0000:00:15.2: BAR 0 [mem 0x3815c74000-0x3815c74fff 64bit]: assigned
<6>[ 12.640071] pci 0000:00:15.3: BAR 0 [mem 0x3815c75000-0x3815c75fff 64bit]: assigned
<6>[ 12.640124] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 12.640172] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 12.640185] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
<6>[ 12.640198] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 12.640209] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 12.640232] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 12.640241] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]
<6>[ 12.640253] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 12.640264] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 12.640279] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 12.640288] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]
<6>[ 12.640300] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 12.640311] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 12.640335] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 12.640343] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 12.640354] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 12.640369] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 12.640406] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 12.640453] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 12.640461] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 12.640469] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 12.640478] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 12.640487] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 12.640497] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
<6>[ 12.640504] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 12.640512] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 12.640522] pci_bus 0000:2b: resource 0 [io 0x6000-0x6fff]
<6>[ 12.640530] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 12.640538] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 12.640548] pci_bus 0000:55: resource 0 [io 0x7000-0x7fff]
<6>[ 12.640555] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 12.640563] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 12.640573] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff]
<6>[ 12.640581] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[ 12.640589] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 12.642035] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 12.644251] PCI: CLS 0 bytes, default 64
<6>[ 12.644398] DMAR: No RMRR found
<6>[ 12.644413] DMAR: No ATSR found
<6>[ 12.644419] DMAR: dmar1: Using Queued invalidation
<6>[ 12.644447] DMAR: dmar0: Using Queued invalidation
<6>[ 12.644458] DMAR: dmar2: Using Queued invalidation
<6>[ 12.645640] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 12.645746] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 12.645850] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 12.645929] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 12.650421] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 12.652198] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 12.652301] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 12.652385] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 12.652487] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 12.652603] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 12.652664] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 12.652719] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 12.652822] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 12.652912] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 12.653015] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 12.653072] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 12.653197] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 12.653256] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 12.653320] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 12.653377] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 12.653485] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 12.653544] pci 0000:00:16.3: Adding to iommu group 14
<6>[ 12.653624] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 12.653723] pci 0000:00:1c.4: Adding to iommu group 16
<6>[ 12.653877] pci 0000:00:1f.0: Adding to iommu group 17
<6>[ 12.653939] pci 0000:00:1f.3: Adding to iommu group 17
<6>[ 12.654005] pci 0000:00:1f.4: Adding to iommu group 17
<6>[ 12.654065] pci 0000:00:1f.5: Adding to iommu group 17
<6>[ 12.654124] pci 0000:00:1f.6: Adding to iommu group 17
<6>[ 12.654189] pci 0000:00:1f.7: Adding to iommu group 17
<6>[ 12.654274] pci 0000:7f:00.0: Adding to iommu group 18
<6>[ 12.654379] pci 0000:80:00.0: Adding to iommu group 19
<6>[ 12.668576] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 12.668596] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 12.668604] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB)
<6>[ 12.674082] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 12.674145] clocksource: Switched to clocksource tsc
<6>[ 12.674314] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 12.679574] Initialise system trusted keyrings
<5>[ 12.679672] Key type blacklist registered
<6>[ 12.679985] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 12.690876] zbud: loaded
<6>[ 12.692459] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 12.692602] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 12.692610] ntfs3: Read-only LZX/Xpress compression included
<5>[ 12.693145] integrity: Platform Keyring initialized
<5>[ 12.693176] integrity: Machine keyring initialized
<6>[ 12.699525] xor: automatically using best checksumming function avx
<5>[ 12.699537] Key type asymmetric registered
<5>[ 12.699551] Asymmetric key parser 'x509' registered
<6>[ 12.699690] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 12.700177] io scheduler mq-deadline registered
<6>[ 12.701884] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 12.704268] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 12.704794] pcieport 0000:00:07.0: AER: enabled with IRQ 126
<6>[ 12.706073] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 12.706592] pcieport 0000:00:07.1: AER: enabled with IRQ 127
<6>[ 12.707851] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 12.708326] pcieport 0000:00:07.2: AER: enabled with IRQ 128
<6>[ 12.709451] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 12.709964] pcieport 0000:00:1c.0: AER: enabled with IRQ 129
<6>[ 12.712144] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[ 12.712682] pcieport 0000:00:1c.4: AER: enabled with IRQ 130
<6>[ 12.713308] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 12.716338] Monitor-Mwait will be used to enter C-1 state
<7>[ 12.716478] Monitor-Mwait will be used to enter C-2 state
<7>[ 12.716529] Monitor-Mwait will be used to enter C-3 state
<6>[ 12.723655] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 12.723873] ACPI: button: Lid Switch [LID0]
<6>[ 12.724140] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 12.724310] ACPI: button: Sleep Button [SLPB]
<6>[ 12.724521] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 12.724934] ACPI: button: Power Button [PWRB]
<4>[ 12.733685] ACPI Warning: \_SB.PR00._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 12.742314] ACPI Warning: \_SB.PR01._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 12.750729] ACPI Warning: \_SB.PR02._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 12.759105] ACPI Warning: \_SB.PR03._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 12.766898] ACPI Warning: \_SB.PR04._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 12.774687] ACPI Warning: \_SB.PR05._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 12.781994] ACPI Warning: \_SB.PR06._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 12.789237] ACPI Warning: \_SB.PR07._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<6>[ 12.883196] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 12.883214] ACPI: thermal: Thermal Zone [TZ00] (64 C)
<6>[ 12.884267] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 12.884659] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 12.885574] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 12.907671] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 12.921149] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[ 12.922955] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[ 12.945726] 0000:00:16.3: ttyS4 at I/O 0x4020 (irq = 19, base_baud = 115200) is a 16550A
<4>[ 12.950333] hpet_acpi_add: no address or irqs in _CRS
<6>[ 12.950528] Linux agpgart interface v0.103
<6>[ 12.951243] ACPI: bus type drm_connector registered
<6>[ 12.974722] loop: module loaded
<6>[ 13.022886] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 13.153987] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 13.286832] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 13.410925] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[ 13.529723] Key type psk registered
<6>[ 13.535788] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[ 13.537009] tun: Universal TUN/TAP device driver, 1.6
<6>[ 13.538609] nvme nvme0: pci function 0000:80:00.0
<6>[ 13.539078] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 13.539248] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 13.542383] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 13.546231] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 13.546329] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 13.546360] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 13.547042] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 13.547081] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.547098] usb usb1: Product: xHCI Host Controller
<6>[ 13.547110] usb usb1: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 13.547124] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 13.549164] hub 1-0:1.0: USB hub found
<6>[ 13.549309] hub 1-0:1.0: 1 port detected
<6>[ 13.555866] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 13.555890] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.555908] usb usb2: Product: xHCI Host Controller
<6>[ 13.555920] usb usb2: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 13.555935] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 13.557623] hub 2-0:1.0: USB hub found
<6>[ 13.557704] hub 2-0:1.0: 3 ports detected
<6>[ 13.579877] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 13.592101] nvme0n1: p1 p2
<6>[ 13.599536] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 13.599586] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 13.601881] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 13.604003] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 13.604031] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 13.604052] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 13.604334] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 13.604349] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.604359] usb usb3: Product: xHCI Host Controller
<6>[ 13.604366] usb usb3: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 13.604375] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 13.605431] hub 3-0:1.0: USB hub found
<6>[ 13.605492] hub 3-0:1.0: 8 ports detected
<6>[ 13.636157] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 13.636180] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.636191] usb usb4: Product: xHCI Host Controller
<6>[ 13.636199] usb usb4: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 13.636208] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 13.636911] hub 4-0:1.0: USB hub found
<6>[ 13.636960] hub 4-0:1.0: 2 ports detected
<6>[ 13.645988] usbcore: registered new interface driver usb-storage
<6>[ 13.646917] usbcore: registered new interface driver usbserial_generic
<6>[ 13.647112] usbserial: USB Serial support registered for generic
<6>[ 13.647200] usbcore: registered new interface driver ftdi_sio
<6>[ 13.647251] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 13.647327] usbcore: registered new interface driver pl2303
<6>[ 13.647377] usbserial: USB Serial support registered for pl2303
<6>[ 13.647571] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 13.647585] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[ 14.363773] i8042: Can't read CTR while initializing i8042
<3>[ 14.363789] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 14.365336] mousedev: PS/2 mouse device common for all mice
<6>[ 14.366392] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 14.368331] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 14.368586] rtc_cmos rtc_cmos: setting system clock to 2025-02-27T20:02:10 UTC (1740686530)
<6>[ 14.368892] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 14.368953] i2c_dev: i2c /dev entries driver
<6>[ 14.374434] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 14.374452] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 14.374463] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 14.374514] device-mapper: uevent: version 1.0.3
<6>[ 14.374920] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[ 14.375064] platform eisa.0: Probing EISA bus 0
<4>[ 14.375082] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 14.375097] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 14.375109] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 14.375121] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 14.375132] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 14.375144] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 14.375156] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 14.375169] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 14.375185] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 14.375195] platform eisa.0: EISA: Detected 0 cards
<6>[ 14.375205] intel_pstate: Intel P-state driver initializing
<6>[ 14.379050] Hybrid CPU capacity scaling enabled
<6>[ 14.380278] intel_pstate: HWP enabled
<6>[ 14.380290] sdhci: Secure Digital Host Controller Interface driver
<6>[ 14.380298] sdhci: Copyright(c) Pierre Ossman
<6>[ 14.380449] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 14.383790] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[ 14.385091] drop_monitor: Initializing network drop monitor service
<6>[ 14.385430] NET: Registered PF_INET6 protocol family
<6>[ 14.389584] Segment Routing with IPv6
<6>[ 14.389648] In-situ OAM (IOAM) with IPv6
<6>[ 14.389715] NET: Registered PF_PACKET protocol family
<5>[ 14.389973] Key type dns_resolver registered
<4>[ 14.395015] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 14.396063] microcode: Current revision: 0x0000011b
<6>[ 14.397995] IPI shorthand broadcast: enabled
<6>[ 14.409069] sched_clock: Marking stable (14399000779, 9807062)->(14477805406, -68997565)
<6>[ 14.409896] registered taskstats version 1
<5>[ 14.411363] Loading compiled-in X.509 certificates
<6>[ 14.439414] Demotion targets for Node 0: null
<6>[ 14.439698] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<6>[ 14.439703] kmemleak: Automatic memory scanning thread started
<5>[ 14.439904] Key type .fscrypt registered
<5>[ 14.439909] Key type fscrypt-provisioning registered
<6>[ 14.442460] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 14.444994] Key type encrypted registered
<6>[ 14.445004] AppArmor: AppArmor sha256 policy hashing enabled
<6>[ 14.445198] ima: No TPM chip found, activating TPM-bypass!
<5>[ 14.445214] Loading compiled-in module X.509 certificates
<5>[ 14.445884] Loaded X.509 cert 'Build time autogenerated kernel key: bd50ae2093d0fde3cdc5437c67212c128bece62a'
<6>[ 14.445897] ima: Allocated hash algorithm: sha256
<6>[ 14.445948] ima: No architecture policies found
<6>[ 14.446054] evm: Initialising EVM extended attributes:
<6>[ 14.446059] evm: security.selinux
<6>[ 14.446063] evm: security.SMACK64
<6>[ 14.446067] evm: security.SMACK64EXEC
<6>[ 14.446071] evm: security.SMACK64TRANSMUTE
<6>[ 14.446075] evm: security.SMACK64MMAP
<6>[ 14.446079] evm: security.apparmor
<6>[ 14.446083] evm: security.ima
<6>[ 14.446086] evm: security.capability
<6>[ 14.446090] evm: HMAC attrs: 0x1
<6>[ 14.448163] PM: Magic number: 13:89:44
<6>[ 14.448392] printk: legacy console [netcon0] enabled
<6>[ 14.448399] netconsole: network logging started
<6>[ 14.448909] RAS: Correctable Errors collector initialized.
<6>[ 14.449389] clk: Disabling unused clocks
<6>[ 14.449400] PM: genpd: Disabling unused power domains
<6>[ 14.449907] md: Waiting for all devices to be available before autodetect
<6>[ 14.449914] md: If you don't use raid, use raid=noautodetect
<6>[ 14.449919] md: Autodetecting RAID arrays.
<6>[ 14.449927] md: autorun ...
<6>[ 14.449930] md: ... autorun DONE.
<6>[ 14.491363] EXT4-fs (nvme0n1p2): mounted filesystem 9a25468b-c3fd-45e2-b59f-4eab10a53c55 ro with ordered data mode. Quota mode: none.
<6>[ 14.491425] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 14.491958] devtmpfs: mounted
<6>[ 14.503721] Freeing unused decrypted memory: 2028K
<6>[ 14.504636] Freeing unused kernel image (initmem) memory: 5632K
<6>[ 14.504660] Write protecting the kernel read-only data: 34816k
<6>[ 14.505079] Freeing unused kernel image (text/rodata gap) memory: 60K
<6>[ 14.505435] Freeing unused kernel image (rodata/data gap) memory: 968K
<6>[ 14.511145] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 14.511169] Run /sbin/init as init process
<7>[ 14.511174] with arguments:
<7>[ 14.511175] /sbin/init
<7>[ 14.511176] with environment:
<7>[ 14.511177] HOME=/
<7>[ 14.511177] TERM=linux
<7>[ 14.511178] BOOT_IMAGE=/boot/drm_intel
<7>[ 14.556777] systemd[1]: Inserted module 'autofs4'
<7>[ 14.574785] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 14.574832] systemd[1]: Detected architecture x86-64.
<7>[ 14.576362] systemd[1]: Hostname set to <shard-lnl-8>.
<7>[ 14.836732] systemd[1]: Queued start job for default target graphical.target.
<7>[ 14.864370] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 14.865966] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 14.867177] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 14.867406] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 14.868010] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 14.868118] systemd[1]: Expecting device dev-disk-by\x2duuid-BBA9\x2dCAA8.device - /dev/disk/by-uuid/BBA9-CAA8...
<7>[ 14.868194] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 14.868271] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 14.868334] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 14.868396] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 14.868465] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 14.868706] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 14.869074] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 14.869336] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 14.869630] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 14.869874] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 14.870066] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 14.870335] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 14.870631] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 14.870897] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 14.871072] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 14.871339] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 14.871580] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 14.874867] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 14.877325] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 14.879821] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 14.882382] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 14.888390] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 14.891922] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 14.895088] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 14.897931] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 14.900337] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 14.903463] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 14.906778] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 14.911305] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 14.915623] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 14.920575] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 14.924914] systemd-journald[216]: Collecting audit messages is disabled.
<7>[ 14.925167] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 14.925629] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<7>[ 14.932300] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[ 14.937149] pstore: Using crash dump compression: deflate
<6>[ 14.939626] pstore: Registered efi_pstore as persistent store backend
<7>[ 14.940068] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 14.940339] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 14.940417] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<6>[ 14.941681] fuse: init (API version 7.42)
<7>[ 14.945056] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<7>[ 14.950747] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 15.104900] EXT4-fs (nvme0n1p2): re-mounted 9a25468b-c3fd-45e2-b59f-4eab10a53c55 r/w. Quota mode: none.
<6>[ 15.137338] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:274595840k SS
<7>[ 15.150641] systemd-journald[216]: Received client request to flush runtime journal.
<7>[ 15.165875] systemd-journald[216]: /var/log/journal/2b6a2c75c75941a29794878cc3195815/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 15.165896] systemd-journald[216]: Rotating system journal.
<4>[ 15.806151] nvme nvme0: using unchecked data buffer
<6>[ 15.962368] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<4>[ 15.963941] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.963966] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.963990] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964015] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964040] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964064] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964089] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964113] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964138] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964163] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964188] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964212] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964237] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964261] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964286] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964310] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964335] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964371] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964395] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964420] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964445] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964469] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964494] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964519] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964543] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964580] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964604] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964655] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964679] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964703] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964728] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964752] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964787] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964821] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964839] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964864] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964889] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.964913] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985164] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985190] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985214] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985239] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985263] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985288] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985324] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985348] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985449] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985488] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985512] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985543] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985615] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985635] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985660] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985709] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985738] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985758] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985783] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985815] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985834] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985858] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985883] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985907] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985932] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985957] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.985981] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.986006] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.986030] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 15.986055] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038007] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038033] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038053] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038073] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038093] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038113] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038133] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038209] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038229] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038249] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038269] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038289] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038309] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038329] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038349] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038368] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038388] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038408] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038454] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038473] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038493] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038513] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038564] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038583] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038603] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038660] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038680] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038700] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038720] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038742] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038762] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038782] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.038802] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.039121] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.039141] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.039161] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.039181] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.039201] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.039221] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 16.040986] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<6>[ 16.049772] intel-hid INTC107B:00: platform supports 5 button array
<6>[ 16.060036] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<4>[ 16.070323] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.070350] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 16.083259] pci 0000:00:05.0: Setting to D3hot
<6>[ 16.094988] pci 0000:00:0b.0: Setting to D3hot
<4>[ 16.099748] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.099772] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.099792] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.099824] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.099842] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.099861] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.099881] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.099901] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.099921] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.099939] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.099959] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.099997] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100017] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100051] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100071] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100091] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100111] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100147] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100169] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100189] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100209] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100231] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100251] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100271] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100291] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100326] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100373] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100393] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100413] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100447] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100467] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100487] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100506] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100526] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100546] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100566] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100586] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100606] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100626] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100646] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100666] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100686] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100706] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100726] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.100746] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<5>[ 16.100836] audit: type=1400 audit(1740686532.229:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=430 comm="apparmor_parser"
<5>[ 16.100852] audit: type=1400 audit(1740686532.230:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=433 comm="apparmor_parser"
<5>[ 16.100859] audit: type=1400 audit(1740686532.230:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=432 comm="apparmor_parser"
<5>[ 16.101462] audit: type=1400 audit(1740686532.231:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=431 comm="apparmor_parser"
<5>[ 16.101720] audit: type=1400 audit(1740686532.231:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=434 comm="apparmor_parser"
<5>[ 16.105368] audit: type=1400 audit(1740686532.235:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=435 comm="apparmor_parser"
<4>[ 16.107081] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 16.107293] intel_pmc_core INT33A1:00: initialized
<5>[ 16.107576] audit: type=1400 audit(1740686532.237:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=436 comm="apparmor_parser"
<5>[ 16.109741] audit: type=1400 audit(1740686532.239:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=437 comm="apparmor_parser"
<5>[ 16.112355] audit: type=1400 audit(1740686532.242:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=438 comm="apparmor_parser"
<3>[ 16.113248] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<5>[ 16.113486] audit: type=1400 audit(1740686532.243:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=439 comm="apparmor_parser"
<3>[ 16.125909] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<6>[ 16.478327] ACPI: bus type thunderbolt registered
<6>[ 16.486246] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 16.487195] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 16.487200] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 16.488773] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 16.489619] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 16.494441] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 16.530980] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 16.546715] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 16.551200] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 16.562200] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[ 16.569256] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[ 16.569261] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[ 16.593671] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 16.594398] intel_rapl_common: Found RAPL domain package
<6>[ 16.594404] intel_rapl_common: Found RAPL domain dram
<6>[ 16.631316] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 16.651285] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 16.729683] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, e4:fa:c4:a4:ee:2f, XID 541, IRQ 184
<6>[ 16.729689] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[ 16.779400] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
<6>[ 16.779405] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 16.779406] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 16.779407] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 16.779408] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 16.861676] cryptd: max_cpu_qlen set to 1000
<6>[ 16.912793] AES CTR mode by8 optimization enabled
<6>[ 16.967106] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<4>[ 17.051644] block nvme0n1: No UUID available providing old NGUID
<6>[ 17.056746] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:35:91
<6>[ 17.056752] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[ 17.057057] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[ 17.190464] intel_rapl_common: Found RAPL domain package
<6>[ 17.190470] intel_rapl_common: Found RAPL domain core
<6>[ 17.190769] intel_rapl_common: Found RAPL domain dram
<6>[ 17.190771] intel_rapl_common: Found RAPL domain psys
<6>[ 17.248585] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[ 17.276852] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[ 17.276862] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[ 17.276865] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<6>[ 17.285173] evm: overlay not supported
<6>[ 17.376514] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<4>[ 17.418125] spi-nor spi0.0: supply vcc not found, using dummy regulator
<6>[ 17.462365] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<5>[ 17.552696] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 17.552714] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 17.614338] loop0: detected capacity change from 0 to 8
<6>[ 17.643937] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[ 17.805270] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[ 18.036667] Consider using thermal netlink events interface
<6>[ 18.280740] hid: raw HID events driver (C) Jiri Kosina
<6>[ 18.287681] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 18.326110] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.328220] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.330685] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.331836] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.334498] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.335725] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.341276] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.345213] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.349608] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.352518] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.355707] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.358219] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.955089] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 18.955112] typec port0: bound usb2-port1 (ops connector_ops)
<6>[ 19.878171] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 19.878193] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 21.426191] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<7>[ 26.917485] systemd-journald[216]: /var/log/journal/2b6a2c75c75941a29794878cc3195815/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 51.126858] [IGT] xe_module_load: executing
<7>[ 51.137289] [IGT] xe_module_load: starting subtest load
<5>[ 51.316049] Setting dangerous option force_probe - tainting kernel
<6>[ 51.318976] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 51.320316] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[ 51.320324] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG / Xe2_HPG / Xe3_LPG (20.04) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 51.320419] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 51.320501] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 51.324969] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 51.328796] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 51.328942] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 51.329030] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 51.329116] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 51.329181] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 51.329241] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 51.329300] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 51.329357] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 51.329411] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 51.329465] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 51.329516] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 51.329566] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 51.329616] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 51.329664] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 51.329714] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 51.329804] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 51.330916] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 51.331004] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 51.335899] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000092 [0x49/00]
<7>[ 51.335997] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 51.338770] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 51.339607] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 51.339668] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 51.339745] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,0000007f
<7>[ 51.339799] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,0000007f
<7>[ 51.339882] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 51.339941] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 51.340005] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 51.340694] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 51.344951] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 51.345024] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 51.345076] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 51.345126] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 51.345175] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 51.345223] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 51.345270] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 51.345316] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 51.345361] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 51.345406] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 51.345450] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 51.345493] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 51.345537] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 51.345579] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 51.347123] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 51.349720] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1263
<6>[ 51.350742] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 51.350839] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 51.350973] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 51.352516] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 51.352608] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 51.371852] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 51.372354] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 51.372541] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 51.372723] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 51.372912] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 51.373068] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 51.373213] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 51.373354] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 51.374018] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 51.374296] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[ 51.374534] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7>[ 51.374785] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 51.375038] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 51.375222] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 51.375389] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 51.375549] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 51.375761] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 51.375940] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 51.376133] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 51.376313] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 51.376497] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 51.376684] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 51.376877] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 51.377073] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 51.377239] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 51.377401] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 51.377554] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.377709] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.377872] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 51.378021] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.378168] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.378310] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.378451] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 51.378588] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.378727] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.378873] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.379003] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 51.379124] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.379240] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.379354] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.379465] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 51.379571] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.379675] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.379776] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.379889] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 51.379987] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.380081] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.380174] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.380271] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 51.380774] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 51.380896] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 51.381002] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 51.381101] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 51.381197] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 51.381288] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 51.381377] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 51.381463] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 51.381545] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 51.381638] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 51.381727] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 51.381823] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 51.381913] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 51.381996] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 51.382081] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 51.382157] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 51.382228] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 51.382302] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 51.382377] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 51.382453] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 51.382527] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 51.382599] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 51.382668] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 51.382739] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 51.382820] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 51.382901] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 51.382984] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 51.383063] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 51.383183] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 51.383315] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 51.383435] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 51.383560] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 51.383722] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 51.383851] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 51.383966] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 51.384082] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 51.384219] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 51.384308] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=mem
<7>[ 51.384330] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 51.384438] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 51.384526] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 51.384613] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 51.384851] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 51.385026] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 51.386411] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 51.386512] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 51.386601] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 51.386686] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 51.386768] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 51.386866] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7>[ 51.386972] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 51.387068] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 51.387164] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 51.387187] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 51.387260] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 51.387317] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 51.387338] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 51.387414] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 51.387415] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 9 (9.0 usec)
<7>[ 51.387489] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 51.387504] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 103 (103.0 usec)
<7>[ 51.387577] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7>[ 51.387604] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 103 (103.0 usec)
<7>[ 51.387678] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 51.387699] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 103 (103.0 usec)
<7>[ 51.387764] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 51.387788] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 96 (96.0 usec)
<7>[ 51.387851] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 51.387886] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 103 (103.0 usec)
<7>[ 51.387937] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 51.388022] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 51.388107] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 51.388191] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 51.388274] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7>[ 51.388362] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 51.388452] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 51.388542] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 51.388631] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 51.388717] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 51.388803] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 51.388900] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 51.388984] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<7>[ 51.392144] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[ 51.395317] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 51.395478] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 51.395627] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[ 51.395865] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 51.396096] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[ 51.396316] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 51.396479] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 51.396626] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 51.396762] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 51.396931] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 51.397070] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 51.397198] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 51.397323] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 51.397448] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 51.398113] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 51.398351] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 51.398496] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 51.398626] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 51.398743] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 51.398865] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 51.399124] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 51.399422] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<6>[ 51.401160] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7>[ 51.401159] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 51.401324] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[ 51.403170] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 51.403786] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 51.404654] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e
<7>[ 51.406243] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 51.406778] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 51.408945] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 51.418417] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 51.418428] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.418430] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.418432] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 51.418434] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.418436] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 51.418441] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.418442] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 51.418445] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.418483] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.418484] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.418485] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.418493] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.419028] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[ 51.419566] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 51.419681] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[ 51.419825] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 51.419963] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 51.420117] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 51.420204] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 51.420285] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 51.420364] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 51.420442] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 51.420551] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 51.420736] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 51.420913] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 51.421057] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 51.421401] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 51.421526] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 51.421633] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 51.421838] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 51.421956] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 51.422067] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 51.422461] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 51.422577] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 51.422689] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 51.422770] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 51.422860] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 51.422958] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 51.423057] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 51.423154] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 51.423230] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 51.423306] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 51.423382] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 51.423458] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 51.423532] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 51.423604] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 51.423674] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 51.423743] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 51.423820] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 51.423893] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 51.423965] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 51.424035] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 51.424106] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 51.424876] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 51.425000] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 51.425101] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 51.425184] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 51.425256] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[ 51.425324] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[ 51.425389] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[ 51.425457] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 51.425528] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 51.425592] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[ 51.425654] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[ 51.425716] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[ 51.425781] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 51.425861] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 51.425930] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[ 51.425996] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[ 51.426062] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[ 51.426151] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[ 51.426232] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[ 51.426309] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[ 51.426385] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[ 51.426540] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[ 51.426602] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 51.426662] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 51.426722] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 51.426780] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 51.426847] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 51.426921] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 51.427035] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 51.427120] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 51.427193] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 51.427256] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 51.427316] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 51.427376] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 51.427435] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7>[ 51.427522] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 51.427583] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 51.427642] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 51.427700] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 51.427758] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 51.427819] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 51.427879] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7>[ 51.428006] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[ 51.428103] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A
<7>[ 51.428283] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 51.428371] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 51.428453] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 51.428532] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 51.428610] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 51.428686] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 51.428761] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 51.428842] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 51.428923] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 51.429002] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 51.429081] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 51.429154] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 51.429225] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 51.429295] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 51.429365] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 51.429434] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0
<7>[ 51.429503] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96
<7>[ 51.429572] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906
<7>[ 51.429640] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.429710] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.429778] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.429860] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.429939] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.430017] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 51.430093] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 51.430160] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 51.430226] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 51.430291] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 51.430354] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 51.430418] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 51.430481] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 51.430545] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.430606] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.430665] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.430726] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.430786] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.430860] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.430943] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.431026] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.431110] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.431179] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.431239] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 51.431299] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 51.431509] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 51.431586] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 51.431660] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 51.431933] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 51.432038] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[ 51.441187] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<7>[ 51.472899] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<6>[ 51.661118] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 51.661121] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 51.661123] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 51.661210] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[ 51.661312] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 51.661395] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 51.661465] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 51.661551] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[ 51.661631] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[ 51.661720] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[ 51.661779] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 51.661858] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 51.661920] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 51.662617] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 51.662679] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 51.662742] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 51.662803] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 51.662879] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 51.662948] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 51.663015] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 51.663086] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 51.663160] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 51.663228] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 51.663295] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 51.663360] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 51.663427] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 51.663493] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 51.663557] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 51.663622] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 51.663686] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 51.663751] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 51.663824] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 51.663886] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 51.663953] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 51.664015] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 51.664080] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 51.664141] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 51.664192] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 51.664244] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 51.664302] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 51.664361] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 51.664419] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[ 51.664475] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[ 51.664531] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[ 51.664588] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 51.664645] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 51.664704] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 51.664763] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 51.664827] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 51.664890] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 51.664959] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 51.665291] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 51.665357] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 51.665413] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 51.665630] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 51.665684] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 51.665732] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 51.666113] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 51.666178] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7>[ 51.666240] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 51.666303] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[ 51.666361] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[ 51.666415] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[ 51.666745] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 51.666807] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[ 51.666889] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[ 51.666959] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 51.667028] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 51.667095] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 51.667159] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 51.667215] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 51.667267] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 51.667318] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 51.667368] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 51.667417] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 51.667465] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 51.667515] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 51.667579] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 51.667727] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 51.670600] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[ 51.683682] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[ 51.684423] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 51.684498] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 51.694003] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 51.694344] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 51.695081] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 51.695157] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 51.695229] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[ 51.695296] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 51.695367] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ca18000
<7>[ 51.695431] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 51.695493] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 51.695552] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 51.695612] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 51.698423] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 51.698499] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7>[ 51.698574] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 51.701456] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 51.705978] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 51.705981] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 51.705982] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 51.705984] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 51.705985] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 51.705986] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 51.705987] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 51.705988] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 51.705989] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 51.705990] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 51.706015] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[ 51.706138] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[ 51.706235] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[ 51.706734] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 51.706820] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 51.706916] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 51.707012] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 51.707101] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 51.707178] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 51.707243] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 51.707310] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 51.707375] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 51.707439] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 51.707502] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 51.707563] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 51.707624] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 51.707685] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 51.707744] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 51.707804] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 51.707890] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 51.707969] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 51.708046] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 51.708120] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 51.708177] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 51.708232] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 51.708287] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 51.708340] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 51.708392] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 51.708445] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 51.708507] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 51.709196] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 51.709276] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 51.709611] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 51.709678] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 51.710122] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 51.710189] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 51.710249] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[ 51.710308] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 51.710366] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 51.710422] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 51.710477] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 51.710530] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 51.710582] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 51.710632] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 51.710682] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 51.710730] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 51.710777] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 51.710834] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 51.710914] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 51.711014] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 51.726530] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[ 51.727553] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 51.727650] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000066 [0x33/00]
<7>[ 51.727711] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 51.747280] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 51.747626] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 51.748381] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 51.750330] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 51.752233] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 51.794837] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 51.796645] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 51.797019] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 51.797348] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0
<7>[ 51.797642] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 51.797899] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 51.798241] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 51.798514] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.798783] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.799065] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 51.800364] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 51.800756] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 51.801029] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 51.816289] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 51.826355] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[ 51.831722] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[ 51.832658] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 51.835326] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[ 51.835427] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[ 51.835984] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 51.836789] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[ 51.836856] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[ 51.837271] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 51.838384] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[ 51.838424] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[ 51.838751] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 51.839251] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[ 51.839281] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 51.839307] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 51.850226] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 51.852915] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 51.853775] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 51.853911] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 51.855250] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 51.855390] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 51.855513] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 51.855606] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 51.855717] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 51.855809] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 51.855922] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 51.855968] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[ 51.856060] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 51.856097] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[ 51.856164] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 51.856188] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[ 51.856251] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 51.856269] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[ 51.856472] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 51.856754] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 51.856772] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 51.857629] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 51.858144] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 51.858259] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 51.858366] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 51.858547] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 51.858551] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.858553] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.858554] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 51.858556] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.858557] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 51.858561] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.858562] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 51.858564] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.858586] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 51.858683] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 51.859331] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 51.859441] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 51.860445] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<5>[ 51.860660] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.860662] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.860663] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.860693] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 51.860703] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.860713] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 51.860722] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 51.860878] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 51.860888] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 51.860897] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 51.861026] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 51.861035] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 51.861042] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 51.861166] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 51.861175] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 51.861179] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 51.861181] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 51.861184] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 51.861259] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 51.861271] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 51.861274] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 51.861277] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 51.861279] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 51.861290] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 51.861317] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 51.861361] xe 0000:00:02.0: [drm:intelfb_create [xe]] no BIOS fb, allocating a new one
<7>[ 51.861998] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 51.868362] xe 0000:00:02.0: [drm:intelfb_create [xe]] allocated 2880x1800 fb: 0x01d95000
<6>[ 51.869147] fbcon: xedrmfb (fb0) is primary device
<7>[ 51.870066] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 51.870216] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 51.870344] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 51.870477] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 51.870584] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 51.870701] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 51.870846] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 51.870969] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 51.871086] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 51.871204] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 51.871310] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 51.871404] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 51.871496] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 51.871601] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 51.871709] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 51.871820] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 51.871923] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 51.872026] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 51.872127] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 51.872233] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 51.872335] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 51.872435] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 51.872535] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 51.872633] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 51.872730] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 51.872817] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 51.872911] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 51.873006] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 51.873100] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 51.873192] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 51.873280] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 51.873414] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 51.873514] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 51.873605] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 3, 1 -> 2, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 51.873697] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 25, 25, 25, 25, 25, 25, 0, 0, 7, 73, 7 -> 49, 289, 289, 289, 265, 289, 0, 0, 63, 73, 87
<7>[ 51.873777] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 319, 319, 319, 293, 319, 0, 0, 64, 82, 88
<7>[ 51.873868] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.873959] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.874048] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.874134] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.874204] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.874273] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.874346] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.874422] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.874515] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.874606] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.874689] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.874768] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.874846] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.874928] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.875010] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.875091] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.875172] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.875254] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.875338] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.875421] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.875494] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[ 51.875585] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 51.875669] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 51.875750] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.875841] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.875945] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 51.876064] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 51.876207] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 51.876307] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 51.876400] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 51.876481] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 51.876561] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 51.876640] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 51.876726] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 51.876819] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 51.876920] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 51.877021] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 51.877119] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 51.877200] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 51.877271] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 51.877341] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 51.877417] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 51.877491] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 51.877564] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 51.877636] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 51.877707] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 51.877776] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 51.877852] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 51.877937] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[ 51.878021] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 2859, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7>[ 51.878104] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 2753, vmin vtotal: 1906, vmax vtotal: 2859
<7>[ 51.878185] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.878260] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.878329] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.878396] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.878463] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.878531] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 51.878598] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 51.878666] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 51.878733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 51.878798] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 51.878884] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 51.878967] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 51.879048] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 51.879128] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.879207] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.879279] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.879344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.879408] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.879467] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.879525] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.879584] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.879647] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.879709] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.879772] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 51.879855] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 51.879940] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 51.880024] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 51.880106] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 51.880185] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 51.880258] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 51.880323] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[ 51.883238] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<6>[ 51.898344] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 51.898486] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[ 51.921123] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 52.089108] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[ 52.089991] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 52.100588] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 52.100645] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 52.100977] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 52.100980] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 52.101270] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 52.153777] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 52.154101] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 52.183417] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 52.183866] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 52.183841] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 52.184594] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 52.184591] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 52.184879] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[ 52.185180] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 52.185415] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[ 52.185641] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[ 52.185872] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[ 52.186124] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 52.186336] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[ 52.186530] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[ 52.186760] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[ 52.186991] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 52.187133] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 52.187216] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[ 52.187415] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[ 52.187427] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 52.187613] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[ 52.187709] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 52.187836] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 52.187989] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 52.188865] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 52.189099] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (495 ms remaining)
<7>[ 52.322581] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 52.689064] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7>[ 52.770798] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 52.771185] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 52.771492] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 52.808121] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 52.808437] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 52.808704] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 52.809035] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 52.905679] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.905676] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.905804] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 53.066526] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 53.068716] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 53.069125] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 53.072606] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 53.073915] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 53.075113] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 53.076388] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 53.077571] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 53.078864] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 53.079190] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 53.080834] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 53.081132] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 53.081858] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 53.082359] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 53.082667] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 53.083037] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[ 53.085065] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 53.085088] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 53.085401] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 53.099102] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 53.101485] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[ 53.101862] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[ 53.103208] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 53.105656] Console: switching to colour frame buffer device 180x56
<6>[ 53.120621] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 53.128994] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 53.129358] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 53.129605] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 53.129853] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 53.130077] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 53.130285] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 53.130485] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 53.130679] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 53.130890] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 53.131098] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 53.131298] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 53.131489] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 53.131678] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 53.131884] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 53.132075] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 53.132262] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 53.132452] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 53.132655] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 53.132874] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 53.133125] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 53.133328] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 53.133521] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 53.133890] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 53.133936] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 53.134694] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 53.134726] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 53.135459] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[ 53.135689] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 53.135947] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 53.136859] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 53.137212] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[ 53.137450] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 53.138231] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 53.139109] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 53.139385] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 53.139659] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 53.140277] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 53.140292] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 53.140297] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.140300] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 53.140307] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.140312] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 53.140325] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.140329] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 53.140336] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.140380] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 53.140617] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 53.141470] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7>[ 53.141501] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 53.141716] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 53.149917] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 53.150267] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 53.150527] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<5>[ 53.150973] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 53.150982] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 53.150987] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.151109] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 53.151158] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 53.151191] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 53.151221] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 53.151580] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 53.151852] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 53.151882] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 53.151905] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 53.152187] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 53.152416] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 53.152441] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 53.152462] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 53.152727] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 53.152982] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 53.153005] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 53.153018] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 53.153026] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 53.153033] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 53.154055] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 53.154107] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 53.154116] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 53.154124] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 53.154132] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 53.154191] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 53.156457] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 53.156739] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[ 53.166584] xe 0000:00:02.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<6>[ 53.209286] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[ 53.213194] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7>[ 53.213458] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[ 53.213972] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 53.233891] xe 0000:00:02.0: [drm:drm_client_dev_restore] intel-fbdev: ret=0
<7>[ 53.234078] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 53.234539] [IGT] xe_module_load: exiting, ret=0
<7>[ 53.250279] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[ 53.250401] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<7>[ 53.252518] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 53.252616] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 53.252695] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 53.252772] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 53.252859] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 53.252947] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 53.253034] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 53.253118] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 53.253202] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 53.253284] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 53.253352] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 53.253420] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 53.253487] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 53.253554] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 53.253621] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 53.253687] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 53.253753] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 53.253820] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 53.253897] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 53.253975] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 53.254053] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 53.254129] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 53.254191] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 53.254253] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 53.254314] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 53.254375] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 53.254435] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 53.254495] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 53.254555] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 53.254614] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 53.254672] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 53.254730] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 53.254787] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 53.254910] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 53.254985] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 53.255059] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 53.257380] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 53.257507] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 53.257610] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<6>[ 53.262860] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[ 53.264605] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 53.267772] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 53.268527] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 54.186296] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 54.186445] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 54.186552] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 54.507732] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 55.658490] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 55.658991] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067