<5>[ 0.000000] Linux version 6.14.0-rc3-xe+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Thu Feb 20 06:28:15 UTC 2025
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro earlyprintk=xdbc1,keep usbcore.autosuspend=-1
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001053fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000105400000-0x000000087f7fffff] usable
<5>[ 0.000000] xhci_dbc:early_xdbc_parse_parameter: dbgp_num: 1
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x68f86018 ESRT=0x68f97a98 MOKvar=0x6cd0c000
<6>[ 0.000000] efi: Remove mem281: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem283: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D97.2411281331 11/28/2024
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000009] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000013] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000017] MTRR map: 10 entries (3 fixed + 7 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000372] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000373] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004654] esrt: Reserving ESRT space from 0x0000000068f97a98 to 0x0000000068f97be8.
<7>[ 0.004662] e820: update [mem 0x68f97000-0x68f97fff] usable ==> reserved
<6>[ 0.004681] Using GB pages for direct mapping
<6>[ 0.005346] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[ 0.005347] printk: early log buf free: 258848(98%)
<6>[ 0.005348] Secure boot disabled
<6>[ 0.005349] ACPI: Early table checksum verification disabled
<6>[ 0.005352] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.005355] ACPI: XSDT 0x000000006FF7C228 00019C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005358] ACPI: FACP 0x000000006FFAB000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.005361] ACPI: DSDT 0x000000006FFB7000 025212 (v02 INTEL LNL 00000002 01000013)
<6>[ 0.005363] ACPI: FACS 0x000000006FEF1000 000040
<6>[ 0.005364] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.005365] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.005367] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.005368] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.005369] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.005371] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.005372] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.005373] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.005375] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.005376] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.005377] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.005379] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.005380] ACPI: SSDT 0x000000006FFE8000 002460 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.005381] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.005382] ACPI: SSDT 0x000000006FFDE000 008F36 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.005384] ACPI: SSDT 0x000000006FFDD000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.005385] ACPI: SSDT 0x000000006FFB2000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.005386] ACPI: SSDT 0x000000006FFB0000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.005387] ACPI: SSDT 0x000000006FFAC000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.005389] ACPI: HPET 0x000000006FFAA000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005390] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005391] ACPI: APIC 0x000000006FFA8000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.005393] ACPI: MCFG 0x000000006FFA7000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005394] ACPI: SSDT 0x000000006FFA6000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.005395] ACPI: SSDT 0x000000006FFA0000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.005396] ACPI: SSDT 0x000000006FF95000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.005398] ACPI: LPIT 0x000000006FF94000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005399] ACPI: SSDT 0x000000006FF93000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.005400] ACPI: SSDT 0x000000006FF92000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.005402] ACPI: DBGP 0x000000006FF91000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005403] ACPI: DBG2 0x000000006FF90000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005404] ACPI: NHLT 0x000000006FF8F000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005405] ACPI: SSDT 0x000000006FF8D000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.005407] ACPI: SSDT 0x000000006FF86000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.005408] ACPI: ECDT 0x000000006FF85000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.005409] ACPI: DMAR 0x000000006FF84000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005410] ACPI: FPDT 0x000000006FF83000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005412] ACPI: SSDT 0x000000006FF82000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.005413] ACPI: SSDT 0x000000006FF80000 001122 (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.005414] ACPI: SSDT 0x000000006FF7D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.005416] ACPI: SDEV 0x000000006FFA9000 000046 (v01 00000000 00000000)
<6>[ 0.005417] ACPI: SSDT 0x000000006FF71000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.005418] ACPI: SSDT 0x000000006FF63000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.005420] ACPI: ASF! 0x000000006FF62000 000074 (v32 INTEL LNL 00000002 01000013)
<6>[ 0.005421] ACPI: PHAT 0x000000006FF61000 0006E0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.005422] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005423] ACPI: Reserving FACP table memory at [mem 0x6ffab000-0x6ffab113]
<6>[ 0.005424] ACPI: Reserving DSDT table memory at [mem 0x6ffb7000-0x6ffdc211]
<6>[ 0.005425] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f]
<6>[ 0.005425] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.005425] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.005425] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.005426] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.005426] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.005426] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.005427] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.005427] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.005427] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.005427] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.005428] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.005428] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.005428] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea45f]
<6>[ 0.005429] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.005429] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe6f35]
<6>[ 0.005429] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0df]
<6>[ 0.005429] ACPI: Reserving SSDT table memory at [mem 0x6ffb2000-0x6ffb6ac2]
<6>[ 0.005430] ACPI: Reserving SSDT table memory at [mem 0x6ffb0000-0x6ffb140e]
<6>[ 0.005430] ACPI: Reserving SSDT table memory at [mem 0x6ffac000-0x6ffaf955]
<6>[ 0.005430] ACPI: Reserving HPET table memory at [mem 0x6ffaa000-0x6ffaa037]
<6>[ 0.005431] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.005431] ACPI: Reserving APIC table memory at [mem 0x6ffa8000-0x6ffa80d7]
<6>[ 0.005431] ACPI: Reserving MCFG table memory at [mem 0x6ffa7000-0x6ffa703b]
<6>[ 0.005431] ACPI: Reserving SSDT table memory at [mem 0x6ffa6000-0x6ffa66e2]
<6>[ 0.005432] ACPI: Reserving SSDT table memory at [mem 0x6ffa0000-0x6ffa5320]
<6>[ 0.005432] ACPI: Reserving SSDT table memory at [mem 0x6ff95000-0x6ff9f469]
<6>[ 0.005432] ACPI: Reserving LPIT table memory at [mem 0x6ff94000-0x6ff940cb]
<6>[ 0.005433] ACPI: Reserving SSDT table memory at [mem 0x6ff93000-0x6ff93d5b]
<6>[ 0.005433] ACPI: Reserving SSDT table memory at [mem 0x6ff92000-0x6ff921ef]
<6>[ 0.005433] ACPI: Reserving DBGP table memory at [mem 0x6ff91000-0x6ff91033]
<6>[ 0.005433] ACPI: Reserving DBG2 table memory at [mem 0x6ff90000-0x6ff90053]
<6>[ 0.005434] ACPI: Reserving NHLT table memory at [mem 0x6ff8f000-0x6ff8f2e2]
<6>[ 0.005434] ACPI: Reserving SSDT table memory at [mem 0x6ff8d000-0x6ff8e15b]
<6>[ 0.005434] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff8c53a]
<6>[ 0.005435] ACPI: Reserving ECDT table memory at [mem 0x6ff85000-0x6ff85068]
<6>[ 0.005435] ACPI: Reserving DMAR table memory at [mem 0x6ff84000-0x6ff840d7]
<6>[ 0.005435] ACPI: Reserving FPDT table memory at [mem 0x6ff83000-0x6ff83043]
<6>[ 0.005435] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff8286c]
<6>[ 0.005436] ACPI: Reserving SSDT table memory at [mem 0x6ff80000-0x6ff81121]
<6>[ 0.005436] ACPI: Reserving SSDT table memory at [mem 0x6ff7d000-0x6ff7f462]
<6>[ 0.005436] ACPI: Reserving SDEV table memory at [mem 0x6ffa9000-0x6ffa9045]
<6>[ 0.005437] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff7b4f9]
<6>[ 0.005437] ACPI: Reserving SSDT table memory at [mem 0x6ff63000-0x6ff70815]
<6>[ 0.005437] ACPI: Reserving ASF! table memory at [mem 0x6ff62000-0x6ff62073]
<6>[ 0.005437] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff616df]
<6>[ 0.005438] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037]
<6>[ 0.005502] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005704] No NUMA configuration found
<6>[ 0.005704] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005709] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<5>[ 5.230916] xhci_dbc:early_xdbc_setup_hardware: failed to setup the connection to host
<6>[ 5.230948] Zone ranges:
<6>[ 5.230948] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 5.230949] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 5.230950] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 5.230950] Device empty
<6>[ 5.230951] Movable zone start for each node
<6>[ 5.230952] Early memory node ranges
<6>[ 5.230952] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 5.230953] node 0: [mem 0x0000000000100000-0x000000006cac0fff]
<6>[ 5.230953] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 5.230954] node 0: [mem 0x0000000105400000-0x000000087f7fffff]
<6>[ 5.230955] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 5.230959] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 5.230976] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 5.233013] On node 0, zone DMA32: 13630 pages in unavailable ranges
<6>[ 5.261647] On node 0, zone Normal: 21504 pages in unavailable ranges
<6>[ 5.261714] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 5.262199] ACPI: PM-Timer IO Port: 0x1808
<6>[ 5.262205] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 5.262256] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 5.262257] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 5.262259] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 5.262261] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 5.262262] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 5.262273] e820: update [mem 0x68f42000-0x68f5cfff] usable ==> reserved
<6>[ 5.262280] TSC deadline timer available
<6>[ 5.262281] CPU topo: Max. logical packages: 1
<6>[ 5.262282] CPU topo: Max. logical dies: 1
<6>[ 5.262282] CPU topo: Max. dies per package: 1
<6>[ 5.262283] CPU topo: Max. threads per core: 1
<6>[ 5.262284] CPU topo: Num. cores per package: 8
<6>[ 5.262284] CPU topo: Num. threads per package: 8
<6>[ 5.262285] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 5.262297] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 5.262298] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 5.262298] PM: hibernation: Registered nosave memory: [mem 0x68f42000-0x68f5cfff]
<6>[ 5.262299] PM: hibernation: Registered nosave memory: [mem 0x68f97000-0x68f97fff]
<6>[ 5.262300] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fe67fff]
<6>[ 5.262300] PM: hibernation: Registered nosave memory: [mem 0x6fe68000-0x6ff4ffff]
<6>[ 5.262301] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 5.262301] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 5.262302] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 5.262302] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 5.262302] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 5.262302] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1053fffff]
<6>[ 5.262304] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 5.262305] Booting paravirtualized kernel on bare hardware
<6>[ 5.262307] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 5.262315] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 5.262660] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 5.262664] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 5.262666] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 5.262678] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro earlyprintk=xdbc1,keep usbcore.autosuspend=-1
<5>[ 5.262749] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 5.262763] random: crng init done
<6>[ 5.264581] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 5.265487] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 5.265542] Fallback order for Node 0: 0
<6>[ 5.265545] Built 1 zonelists, mobility grouping on. Total pages: 8285792
<6>[ 5.265545] Policy zone: Normal
<6>[ 5.265555] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[ 5.265556] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 5.265557] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 5.266494] software IO TLB: area num 8.
<4>[ 5.311587] **********************************************************
<4>[ 5.311589] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 5.311589] ** **
<4>[ 5.311589] ** This system shows unhashed kernel memory addresses **
<4>[ 5.311589] ** via the console, logs, and other interfaces. This **
<4>[ 5.311589] ** might reduce the security of your system. **
<4>[ 5.311590] ** **
<4>[ 5.311590] ** If you see this message and you are not debugging **
<4>[ 5.311590] ** the kernel, report this immediately to your system **
<4>[ 5.311590] ** administrator! **
<4>[ 5.311590] ** **
<4>[ 5.311591] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 5.311591] **********************************************************
<6>[ 5.312669] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 5.312991] ftrace: allocating 59518 entries in 233 pages
<6>[ 5.338612] ftrace: allocated 233 pages with 5 groups
<6>[ 5.339848] Dynamic Preempt: voluntary
<6>[ 5.340300] Running RCU self tests
<6>[ 5.340301] Running RCU synchronous self tests
<6>[ 5.340301] rcu: Preemptible hierarchical RCU implementation.
<6>[ 5.340302] rcu: RCU lockdep checking is enabled.
<6>[ 5.340302] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 5.340303] Trampoline variant of Tasks RCU enabled.
<6>[ 5.340303] Rude variant of Tasks RCU enabled.
<6>[ 5.340303] Tracing variant of Tasks RCU enabled.
<6>[ 5.340304] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 5.340304] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 5.340343] Running RCU synchronous self tests
<6>[ 5.340346] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 5.340350] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 5.340352] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 5.350572] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 5.351026] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 5.351367] Console: colour dummy device 80x25
<6>[ 5.351375] printk: legacy console [tty0] enabled
<6>[ 5.352590] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[ 5.352597] ... MAX_LOCKDEP_SUBCLASSES: 8
<6>[ 5.352601] ... MAX_LOCK_DEPTH: 48
<6>[ 5.352605] ... MAX_LOCKDEP_KEYS: 8192
<6>[ 5.352608] ... CLASSHASH_SIZE: 4096
<6>[ 5.352612] ... MAX_LOCKDEP_ENTRIES: 524288
<6>[ 5.352616] ... MAX_LOCKDEP_CHAINS: 524288
<6>[ 5.352620] ... CHAINHASH_SIZE: 262144
<6>[ 5.352623] memory used by lock dependency info: 54145 kB
<6>[ 5.352628] memory used for stack traces: 4224 kB
<6>[ 5.352631] per task-struct memory footprint: 1920 bytes
<6>[ 5.352680] ACPI: Core revision 20240827
<6>[ 5.353563] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 5.353628] APIC: Switch to symmetric I/O mode setup
<6>[ 5.353633] DMAR: Host address width 38
<6>[ 5.353637] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 5.353666] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 5.353696] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 5.353716] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 5.353742] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 5.353763] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[ 5.353797] DMAR: SATC flags: 0x1
<6>[ 5.353806] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 5.353811] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 5.353816] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 5.355862] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 5.361042] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 5.361061] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[ 5.361135] CPU0: Thermal monitoring enabled (TM1)
<6>[ 5.361142] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 5.361328] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 5.361333] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 5.361342] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 5.361350] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 5.361354] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 5.361361] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 5.361368] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 5.361383] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 5.361390] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 5.361396] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 5.361401] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 5.361407] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 5.361414] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 5.361420] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 5.361425] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 5.361430] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 5.362055] Freeing SMP alternatives memory: 48K
<6>[ 5.362055] pid_max: default: 32768 minimum: 301
<6>[ 5.362055] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 5.362055] landlock: Up and running.
<6>[ 5.362055] Yama: becoming mindful.
<6>[ 5.362055] AppArmor: AppArmor initialized
<6>[ 5.362055] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 5.362055] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 5.362055] Running RCU synchronous self tests
<6>[ 5.362055] Running RCU synchronous self tests
<6>[ 5.362055] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 5.362055] Running RCU Tasks wait API self tests
<6>[ 5.362055] Running RCU Tasks Rude wait API self tests
<6>[ 5.362055] Running RCU Tasks Trace wait API self tests
<6>[ 5.362055] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 5.362055] core: cpu_core PMU driver:
<6>[ 5.362055] ... version: 6
<6>[ 5.362055] ... bit width: 48
<6>[ 5.362059] ... generic registers: 10
<6>[ 5.362063] ... value mask: 0000ffffffffffff
<6>[ 5.362067] ... max period: 00007fffffffffff
<6>[ 5.362071] ... fixed-purpose events: 4
<6>[ 5.362075] ... event mask: 0001000f000003ff
<6>[ 5.362106] signal: max sigframe size: 3632
<6>[ 5.362128] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 5.362214] rcu: Hierarchical SRCU implementation.
<6>[ 5.362219] rcu: Max phase no-delay instances is 400.
<6>[ 5.363124] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 5.364928] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 5.365199] smp: Bringing up secondary CPUs ...
<6>[ 5.365550] smpboot: x86: Booting SMP configuration:
<6>[ 5.365556] .... node #0, CPUs: #1 #2
<6>[ 5.369827] Callback from call_rcu_tasks_trace() invoked.
<4>[ 5.373217] #3 #4 #5 #6 #7
<6>[ 0.010844] core: cpu_atom PMU driver:
<6>[ 0.010844] ... version: 6
<6>[ 0.010844] ... bit width: 48
<6>[ 0.010844] ... generic registers: 8
<6>[ 0.010844] ... value mask: 0000ffffffffffff
<6>[ 0.010844] ... max period: 00007fffffffffff
<6>[ 0.010844] ... fixed-purpose events: 6
<6>[ 0.010844] ... event mask: 00000077000000ff
<6>[ 5.382194] smp: Brought up 1 node, 8 CPUs
<6>[ 5.383210] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 5.385282] Memory: 32345260K/33143168K available (24510K kernel code, 5579K rwdata, 9268K rodata, 5632K init, 68400K bss, 775236K reserved, 0K cma-reserved)
<6>[ 5.386133] devtmpfs: initialized
<6>[ 5.386311] x86/mm: Memory block size: 128MB
<6>[ 5.402110] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes)
<6>[ 5.402552] Running RCU synchronous self tests
<6>[ 5.402566] Running RCU synchronous self tests
<6>[ 5.402583] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 5.402583] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 5.403162] pinctrl core: initialized pinctrl subsystem
<6>[ 5.403658] PM: RTC time: 23:56:02, date: 2025-02-20
<6>[ 5.404565] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 5.405619] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 5.405917] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 5.406192] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 5.406251] audit: initializing netlink subsys (disabled)
<5>[ 5.406341] audit: type=2000 audit(1740095762.045:1): state=initialized audit_enabled=0 res=1
<6>[ 5.407298] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 5.407301] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 5.407307] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 5.407311] thermal_sys: Registered thermal governor 'user_space'
<6>[ 5.407316] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 5.407359] EISA bus registered
<6>[ 5.407386] cpuidle: using governor ladder
<6>[ 5.407386] cpuidle: using governor menu
<6>[ 5.407386] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 5.408171] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 5.408199] PCI: Using configuration type 1 for base access
<6>[ 5.408359] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 5.409478] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 5.409478] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 5.409478] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 5.409478] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 5.429056] raid6: avx2x4 gen() 73233 MB/s
<6>[ 5.446056] raid6: avx2x2 gen() 81218 MB/s
<6>[ 5.463056] raid6: avx2x1 gen() 71025 MB/s
<6>[ 5.463061] raid6: using algorithm avx2x2 gen() 81218 MB/s
<6>[ 5.480056] raid6: .... xor() 52791 MB/s, rmw enabled
<6>[ 5.480061] raid6: using avx2x2 recovery algorithm
<6>[ 5.485479] fbcon: Taking over console
<6>[ 5.487082] ACPI: Added _OSI(Module Device)
<6>[ 5.487149] ACPI: Added _OSI(Processor Device)
<6>[ 5.487207] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 5.487266] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 5.992013] ACPI: 31 ACPI AML tables successfully acquired and loaded
<6>[ 6.006134] ACPI: EC: EC started
<6>[ 6.006146] ACPI: EC: interrupt blocked
<6>[ 6.008561] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 6.008566] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 6.127090] Callback from call_rcu_tasks() invoked.
<6>[ 6.263292] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 6.263301] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 6.290212] ACPI: Interpreter enabled
<6>[ 6.290303] ACPI: PM: (supports S0 S4 S5)
<6>[ 6.290308] ACPI: Using IOAPIC for interrupt routing
<6>[ 6.295550] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 6.295557] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 6.315032] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 6.315081] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 6.355635] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 6.355913] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 6.358948] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 6.712948] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 6.736644] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 6.900172] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 6.903143] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 6.916907] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 6.932602] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 6.933031] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 6.933031] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 7.020460] ACPI: \: Can't tag data node
<3>[ 7.022445] ACPI: \: Can't tag data node
<3>[ 7.024922] ACPI: \: Can't tag data node
<3>[ 7.026926] ACPI: \: Can't tag data node
<3>[ 7.028766] ACPI: \: Can't tag data node
<6>[ 7.195660] ACPI: \_TZ_.FN00: New power resource
<6>[ 7.196173] ACPI: \_TZ_.FN01: New power resource
<6>[ 7.196658] ACPI: \_TZ_.FN02: New power resource
<6>[ 7.197151] ACPI: \_TZ_.FN03: New power resource
<6>[ 7.197639] ACPI: \_TZ_.FN04: New power resource
<6>[ 7.199365] ACPI: \PIN_: New power resource
<6>[ 7.203009] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 7.203025] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 7.206539] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC]
<6>[ 7.224624] PCI host bridge to bus 0000:00
<6>[ 7.224708] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 7.224730] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 7.224748] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 7.224768] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 7.224787] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 7.224810] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 7.233108] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 7.234622] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 7.234755] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 7.234775] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 7.234797] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 7.234881] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 7.238498] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 7.238567] pci 0000:00:04.0: BAR 0 [mem 0x3815c00000-0x3815c1ffff 64bit]
<6>[ 7.241634] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 7.241699] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 7.241718] pci 0000:00:05.0: BAR 4 [mem 0x3815c7b000-0x3815c7bfff 64bit]
<6>[ 7.244092] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 7.244171] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 7.244193] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 7.244227] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 7.244441] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 7.244531] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 7.256245] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 7.256327] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 7.256350] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 7.256385] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 7.256587] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 7.256660] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 7.267566] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 7.267643] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 7.267665] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 7.267697] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 7.267891] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 7.267966] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 7.276698] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 7.276765] pci 0000:00:0a.0: BAR 0 [mem 0x3815c50000-0x3815c5ffff 64bit]
<6>[ 7.276792] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 7.278071] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 7.278071] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 7.278071] pci 0000:00:0b.0: BAR 4 [mem 0x3815c7a000-0x3815c7afff 64bit]
<6>[ 7.278462] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 7.278552] pci 0000:00:0d.0: BAR 0 [mem 0x3815c40000-0x3815c4ffff 64bit]
<6>[ 7.278675] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 7.282584] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 7.282677] pci 0000:00:0d.2: BAR 0 [mem 0x3815bc0000-0x3815bfffff 64bit]
<6>[ 7.282693] pci 0000:00:0d.2: BAR 2 [mem 0x3815c79000-0x3815c79fff 64bit]
<6>[ 7.282802] pci 0000:00:0d.2: supports D1 D2
<6>[ 7.282811] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 7.288705] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 7.288777] pci 0000:00:0d.3: BAR 0 [mem 0x3815b80000-0x3815bbffff 64bit]
<6>[ 7.288791] pci 0000:00:0d.3: BAR 2 [mem 0x3815c78000-0x3815c78fff 64bit]
<6>[ 7.288895] pci 0000:00:0d.3: supports D1 D2
<6>[ 7.288902] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 7.291601] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 7.291662] pci 0000:00:12.0: BAR 0 [mem 0x3815c30000-0x3815c3ffff 64bit]
<6>[ 7.291741] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 7.295173] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 7.295266] pci 0000:00:13.0: BAR 0 [mem 0x3815c77000-0x3815c77fff 64bit]
<6>[ 7.295385] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 7.296085] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 7.296141] pci 0000:00:14.0: BAR 0 [mem 0x3815c20000-0x3815c2ffff 64bit]
<6>[ 7.296223] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 7.300063] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 7.300131] pci 0000:00:14.2: BAR 0 [mem 0x3815c68000-0x3815c6ffff 64bit]
<6>[ 7.300144] pci 0000:00:14.2: BAR 2 [mem 0x3815c76000-0x3815c76fff 64bit]
<6>[ 7.300517] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.300638] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 7.303153] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.303300] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 7.305504] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.305625] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 7.307686] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.307804] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 7.309890] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 7.309982] pci 0000:00:16.0: BAR 0 [mem 0x3815c71000-0x3815c71fff 64bit]
<6>[ 7.310083] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 7.314145] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint
<6>[ 7.314224] pci 0000:00:16.3: BAR 0 [io 0x4020-0x4027]
<6>[ 7.314234] pci 0000:00:16.3: BAR 1 [mem 0x94421000-0x94421fff]
<6>[ 7.314559] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[ 7.314596] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 7.314607] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 7.314618] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 7.314765] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 7.314830] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 7.322710] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 7.322817] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 7.322858] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 7.323204] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[ 7.323370] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[ 7.332086] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 7.334300] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 7.334424] pci 0000:00:1f.3: BAR 0 [mem 0x3815b00000-0x3815b7ffff 64bit]
<6>[ 7.334443] pci 0000:00:1f.3: BAR 4 [mem 0x3815800000-0x38159fffff 64bit]
<6>[ 7.334566] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 7.335316] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 7.335385] pci 0000:00:1f.4: BAR 0 [mem 0x3815c70000-0x3815c700ff 64bit]
<6>[ 7.335401] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 7.337248] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.337372] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 7.337652] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint
<6>[ 7.337716] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[ 7.337791] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 7.339653] pci 0000:00:1f.7: [8086:a824] type 00 class 0x130000 conventional PCI endpoint
<6>[ 7.339712] pci 0000:00:1f.7: BAR 0 [mem 0x3815a00000-0x3815afffff 64bit]
<6>[ 7.339724] pci 0000:00:1f.7: BAR 2 [mem 0x3815000000-0x38157fffff 64bit]
<6>[ 7.339735] pci 0000:00:1f.7: BAR 4 [mem 0x3815c60000-0x3815c67fff 64bit]
<6>[ 7.340222] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 7.340458] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 7.340675] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 7.340920] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[ 7.340994] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff]
<6>[ 7.341007] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[ 7.341020] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[ 7.341217] pci 0000:7f:00.0: supports D1 D2
<6>[ 7.341224] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 7.342058] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 7.344159] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 7.344646] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 7.344698] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 7.345488] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 7.345558] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 7.787638] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 18.535376] Low-power S0 idle used by default for system suspend
<6>[ 18.587476] ACPI: EC: interrupt unblocked
<6>[ 18.587487] ACPI: EC: event unblocked
<6>[ 18.587522] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 18.587529] ACPI: EC: GPE=0x6e
<6>[ 18.587536] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 18.587545] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 18.588114] iommu: Default domain type: Translated
<6>[ 18.588114] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 18.590120] SCSI subsystem initialized
<7>[ 18.590157] libata version 3.00 loaded.
<6>[ 18.590220] ACPI: bus type USB registered
<6>[ 18.590289] usbcore: registered new interface driver usbfs
<6>[ 18.590322] usbcore: registered new interface driver hub
<6>[ 18.590361] usbcore: registered new device driver usb
<6>[ 18.590482] pps_core: LinuxPPS API ver. 1 registered
<6>[ 18.590486] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 18.590505] PTP clock support registered
<6>[ 18.591311] EDAC MC: Ver: 3.0.0
<6>[ 18.593244] efivars: Registered efivars operations
<6>[ 18.596398] NetLabel: Initializing
<6>[ 18.596418] NetLabel: domain hash size = 128
<6>[ 18.596431] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 18.596619] NetLabel: unlabeled traffic allowed by default
<6>[ 18.596656] mctp: management component transport protocol core
<6>[ 18.596668] NET: Registered PF_MCTP protocol family
<6>[ 18.596756] PCI: Using ACPI for IRQ routing
<7>[ 18.643815] PCI: pci_cache_line_size set to 64 bytes
<6>[ 18.644083] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 18.644277] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 18.644296] e820: reserve RAM buffer [mem 0x68f42000-0x6bffffff]
<7>[ 18.644303] e820: reserve RAM buffer [mem 0x68f97000-0x6bffffff]
<7>[ 18.644310] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff]
<7>[ 18.644316] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 18.646128] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 18.646140] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 18.646150] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6>[ 18.646183] vgaarb: loaded
<6>[ 18.647147] clocksource: Switched to clocksource tsc-early
<5>[ 18.658277] VFS: Disk quotas dquot_6.6.0
<6>[ 18.658324] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 18.660283] AppArmor: AppArmor Filesystem Enabled
<6>[ 18.660628] pnp: PnP ACPI init
<6>[ 18.662717] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 18.662743] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 18.666067] system 00:02: [io 0x06a4] has been reserved
<6>[ 18.666089] system 00:02: [io 0x06a0] has been reserved
<6>[ 18.714252] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 18.714277] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 18.714304] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 18.714325] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 18.714345] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
<6>[ 18.714369] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 18.714394] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 18.714414] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 18.721492] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 18.732611] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 18.732892] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 18.741476] pnp: PnP ACPI: found 8 devices
<6>[ 18.755469] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 18.756792] NET: Registered PF_INET protocol family
<6>[ 18.756975] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 18.758891] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 18.759034] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 18.759189] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 18.760005] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 18.761058] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 18.761468] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 18.762164] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 18.762835] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 18.762910] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 18.762920] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 18.762928] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 18.762971] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 18.762978] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 18.762984] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]: assigned
<6>[ 18.762990] pci 0000:00:15.0: BAR 0 [mem 0x3815c72000-0x3815c72fff 64bit]: assigned
<6>[ 18.763044] pci 0000:00:15.1: BAR 0 [mem 0x3815c73000-0x3815c73fff 64bit]: assigned
<6>[ 18.763091] pci 0000:00:15.2: BAR 0 [mem 0x3815c74000-0x3815c74fff 64bit]: assigned
<6>[ 18.763140] pci 0000:00:15.3: BAR 0 [mem 0x3815c75000-0x3815c75fff 64bit]: assigned
<6>[ 18.763188] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 18.763220] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 18.763230] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
<6>[ 18.763239] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 18.763247] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 18.763259] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 18.763264] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]
<6>[ 18.763279] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 18.763287] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 18.763298] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 18.763304] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]
<6>[ 18.763313] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 18.763321] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 18.763333] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 18.763339] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 18.763347] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 18.763359] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 18.763395] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 18.763442] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 18.763447] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 18.763451] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 18.763456] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 18.763461] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 18.763467] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
<6>[ 18.763472] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 18.763476] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 18.763482] pci_bus 0000:2b: resource 0 [io 0x6000-0x6fff]
<6>[ 18.763486] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 18.763491] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 18.763497] pci_bus 0000:55: resource 0 [io 0x7000-0x7fff]
<6>[ 18.763502] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 18.763507] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 18.763513] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff]
<6>[ 18.763517] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[ 18.763522] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 18.764450] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 18.766211] PCI: CLS 0 bytes, default 64
<6>[ 18.766337] DMAR: No RMRR found
<6>[ 18.766349] DMAR: No ATSR found
<6>[ 18.766353] DMAR: dmar1: Using Queued invalidation
<6>[ 18.766383] DMAR: dmar0: Using Queued invalidation
<6>[ 18.766392] DMAR: dmar2: Using Queued invalidation
<6>[ 18.767355] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 18.767437] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 18.767513] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 18.767575] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 18.771609] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 18.772799] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 18.775017] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 18.775205] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 18.775343] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 18.775530] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 18.775629] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 18.775726] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 18.775890] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 18.776041] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 18.776208] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 18.776304] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 18.776542] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 18.776659] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 18.776762] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 18.776867] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 18.777034] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 18.777136] pci 0000:00:16.3: Adding to iommu group 14
<6>[ 18.777269] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 18.777419] pci 0000:00:1c.4: Adding to iommu group 16
<6>[ 18.777673] pci 0000:00:1f.0: Adding to iommu group 17
<6>[ 18.777771] pci 0000:00:1f.3: Adding to iommu group 17
<6>[ 18.777878] pci 0000:00:1f.4: Adding to iommu group 17
<6>[ 18.777976] pci 0000:00:1f.5: Adding to iommu group 17
<6>[ 18.778074] pci 0000:00:1f.6: Adding to iommu group 17
<6>[ 18.778180] pci 0000:00:1f.7: Adding to iommu group 17
<6>[ 18.778307] pci 0000:7f:00.0: Adding to iommu group 18
<6>[ 18.778464] pci 0000:80:00.0: Adding to iommu group 19
<6>[ 18.799545] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 18.799565] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 18.799581] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB)
<6>[ 18.805443] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 18.805518] clocksource: Switched to clocksource tsc
<6>[ 18.805734] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 18.813815] Initialise system trusted keyrings
<5>[ 18.813936] Key type blacklist registered
<6>[ 18.814480] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 18.828890] zbud: loaded
<6>[ 18.830794] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 18.830966] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 18.830977] ntfs3: Read-only LZX/Xpress compression included
<5>[ 18.831558] integrity: Platform Keyring initialized
<5>[ 18.831589] integrity: Machine keyring initialized
<6>[ 18.841519] xor: automatically using best checksumming function avx
<5>[ 18.841532] Key type asymmetric registered
<5>[ 18.841548] Asymmetric key parser 'x509' registered
<6>[ 18.841690] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 18.842289] io scheduler mq-deadline registered
<6>[ 18.843623] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 18.845741] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 18.846394] pcieport 0000:00:07.0: AER: enabled with IRQ 126
<6>[ 18.848060] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 18.848606] pcieport 0000:00:07.1: AER: enabled with IRQ 127
<6>[ 18.850299] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 18.850634] pcieport 0000:00:07.2: AER: enabled with IRQ 128
<6>[ 18.852257] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 18.852873] pcieport 0000:00:1c.0: AER: enabled with IRQ 129
<6>[ 18.855160] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[ 18.855825] pcieport 0000:00:1c.4: AER: enabled with IRQ 130
<6>[ 18.856704] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 18.861211] Monitor-Mwait will be used to enter C-1 state
<7>[ 18.861699] Monitor-Mwait will be used to enter C-2 state
<7>[ 18.861757] Monitor-Mwait will be used to enter C-3 state
<6>[ 18.871254] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 18.871504] ACPI: button: Lid Switch [LID0]
<6>[ 18.871831] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 18.872117] ACPI: button: Sleep Button [SLPB]
<6>[ 18.872399] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 18.872934] ACPI: button: Power Button [PWRB]
<4>[ 18.883487] ACPI Warning: \_SB.PR00._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 18.889644] ACPI Warning: \_SB.PR01._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 18.897736] ACPI Warning: \_SB.PR02._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 18.905957] ACPI Warning: \_SB.PR03._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 18.915065] ACPI Warning: \_SB.PR04._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 18.923188] ACPI Warning: \_SB.PR05._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 18.930688] ACPI Warning: \_SB.PR06._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 18.937514] ACPI Warning: \_SB.PR07._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<6>[ 19.032988] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 19.033006] ACPI: thermal: Thermal Zone [TZ00] (68 C)
<6>[ 19.035071] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 19.035501] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 19.037709] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 19.059799] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 19.077838] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[ 19.079734] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[ 19.102756] 0000:00:16.3: ttyS4 at I/O 0x4020 (irq = 19, base_baud = 115200) is a 16550A
<4>[ 19.104838] hpet_acpi_add: no address or irqs in _CRS
<6>[ 19.105114] Linux agpgart interface v0.103
<6>[ 19.105933] ACPI: bus type drm_connector registered
<6>[ 19.127057] loop: module loaded
<6>[ 19.178928] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 19.345888] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 19.476955] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 19.578932] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[ 19.694796] Key type psk registered
<6>[ 19.699732] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[ 19.701091] nvme nvme0: pci function 0000:80:00.0
<6>[ 19.701292] tun: Universal TUN/TAP device driver, 1.6
<6>[ 19.702799] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 19.702935] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 19.704765] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 19.707646] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 19.707682] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 19.707703] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 19.708682] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 19.708706] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 19.708716] usb usb1: Product: xHCI Host Controller
<6>[ 19.708724] usb usb1: Manufacturer: Linux 6.14.0-rc3-xe+ xhci-hcd
<6>[ 19.708733] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 19.709646] hub 1-0:1.0: USB hub found
<6>[ 19.709721] hub 1-0:1.0: 1 port detected
<6>[ 19.713384] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 19.713399] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 19.713409] usb usb2: Product: xHCI Host Controller
<6>[ 19.713417] usb usb2: Manufacturer: Linux 6.14.0-rc3-xe+ xhci-hcd
<6>[ 19.713425] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 19.714046] hub 2-0:1.0: USB hub found
<6>[ 19.714089] hub 2-0:1.0: 3 ports detected
<6>[ 19.735637] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 19.739121] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 19.739166] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 19.741270] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 19.742541] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 19.742561] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 19.742574] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 19.742747] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 19.742755] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 19.742761] usb usb3: Product: xHCI Host Controller
<6>[ 19.742765] usb usb3: Manufacturer: Linux 6.14.0-rc3-xe+ xhci-hcd
<6>[ 19.742770] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 19.743390] hub 3-0:1.0: USB hub found
<6>[ 19.743436] hub 3-0:1.0: 8 ports detected
<6>[ 19.744968] nvme0n1: p1 p2
<6>[ 19.761109] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 19.761118] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 19.761125] usb usb4: Product: xHCI Host Controller
<6>[ 19.761129] usb usb4: Manufacturer: Linux 6.14.0-rc3-xe+ xhci-hcd
<6>[ 19.761134] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 19.761673] hub 4-0:1.0: USB hub found
<6>[ 19.761703] hub 4-0:1.0: 2 ports detected
<6>[ 19.778453] usbcore: registered new interface driver usb-storage
<6>[ 19.778660] usbcore: registered new interface driver usbserial_generic
<6>[ 19.778795] usbserial: USB Serial support registered for generic
<6>[ 19.778885] usbcore: registered new interface driver ftdi_sio
<6>[ 19.778939] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 19.779019] usbcore: registered new interface driver pl2303
<6>[ 19.779081] usbserial: USB Serial support registered for pl2303
<6>[ 19.779270] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 19.779285] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[ 20.494546] i8042: Can't read CTR while initializing i8042
<3>[ 20.494563] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 20.496769] mousedev: PS/2 mouse device common for all mice
<6>[ 20.497798] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 20.499658] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 20.499870] rtc_cmos rtc_cmos: setting system clock to 2025-02-20T23:56:17 UTC (1740095777)
<6>[ 20.500051] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 20.500105] i2c_dev: i2c /dev entries driver
<6>[ 20.504551] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 20.504569] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 20.504581] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 20.504630] device-mapper: uevent: version 1.0.3
<6>[ 20.505034] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[ 20.505194] platform eisa.0: Probing EISA bus 0
<4>[ 20.505208] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 20.505224] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 20.505239] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 20.505252] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 20.505266] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 20.505279] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 20.505292] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 20.505306] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 20.505319] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 20.505330] platform eisa.0: EISA: Detected 0 cards
<6>[ 20.505341] intel_pstate: Intel P-state driver initializing
<6>[ 20.510843] Hybrid CPU capacity scaling enabled
<6>[ 20.513438] intel_pstate: HWP enabled
<6>[ 20.513454] sdhci: Secure Digital Host Controller Interface driver
<6>[ 20.513467] sdhci: Copyright(c) Pierre Ossman
<6>[ 20.513694] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 20.518217] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[ 20.519767] drop_monitor: Initializing network drop monitor service
<6>[ 20.520245] NET: Registered PF_INET6 protocol family
<6>[ 20.527815] Segment Routing with IPv6
<6>[ 20.527958] In-situ OAM (IOAM) with IPv6
<6>[ 20.528083] NET: Registered PF_PACKET protocol family
<5>[ 20.528602] Key type dns_resolver registered
<4>[ 20.536264] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 20.536952] microcode: Current revision: 0x0000011b
<6>[ 20.538239] IPI shorthand broadcast: enabled
<6>[ 20.552381] sched_clock: Marking stable (20542001812, 9844403)->(20642027303, -90181088)
<6>[ 20.553583] registered taskstats version 1
<5>[ 20.554715] Loading compiled-in X.509 certificates
<6>[ 20.581963] Demotion targets for Node 0: null
<6>[ 20.582265] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<6>[ 20.582271] kmemleak: Automatic memory scanning thread started
<4>[ 20.582273] ------------[ cut here ]------------
<4>[ 20.582278] Debug warning: early ioremap leak of 1 areas detected.
please boot with early_ioremap_debug and report the dmesg.
<4>[ 20.582285] WARNING: CPU: 1 PID: 1 at mm/early_ioremap.c:90 check_early_ioremap_leak+0x51/0x80
<4>[ 20.582309] Modules linked in:
<4>[ 20.582313] CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc3-xe+ #1
<4>[ 20.582319] Hardware name: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D97.2411281331 11/28/2024
<4>[ 20.582328] RIP: 0010:check_early_ioremap_leak+0x51/0x80
<4>[ 20.582333] Code: 48 83 c3 01 48 83 fb 08 75 e1 85 c0 75 0e 48 8b 5d f8 c9 31 f6 31 ff c3 cc cc cc cc 89 c6 48 c7 c7 c0 08 eb 82 e8 1f c4 b6 fd <0f> 0b b8 01 00 00 00 48 8b 5d f8 c9 31 f6 31 ff c3 cc cc cc cc 48
<4>[ 20.582345] RSP: 0000:ffffc900000f7dc0 EFLAGS: 00010246
<4>[ 20.582350] RAX: 0000000000000000 RBX: 0000000000000008 RCX: 0000000000000000
<4>[ 20.582355] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
<4>[ 20.582360] RBP: ffffc900000f7dd0 R08: 0000000000000000 R09: 0000000000000000
<4>[ 20.582365] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
<4>[ 20.582369] R13: ffffffff83ad1490 R14: ffffc900000f7de0 R15: 000000000003828c
<4>[ 20.582375] FS: 0000000000000000(0000) GS:ffff88885f280000(0000) knlGS:0000000000000000
<4>[ 20.582380] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 20.582385] CR2: 0000000000000000 CR3: 0000000003248001 CR4: 0000000000f70ef0
<4>[ 20.582390] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
<4>[ 20.582395] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
<4>[ 20.582400] PKRU: 55555554
<4>[ 20.582402] Call Trace:
<4>[ 20.582405] <TASK>
<4>[ 20.582408] ? show_regs+0x6c/0x80
<4>[ 20.582414] ? __warn+0x93/0x1c0
<4>[ 20.582419] ? check_early_ioremap_leak+0x51/0x80
<4>[ 20.582424] ? report_bug+0x182/0x1b0
<4>[ 20.582430] ? handle_bug+0x6e/0xb0
<4>[ 20.582435] ? exc_invalid_op+0x18/0x80
<4>[ 20.582439] ? asm_exc_invalid_op+0x1b/0x20
<4>[ 20.582446] ? check_early_ioremap_leak+0x51/0x80
<4>[ 20.582451] ? __pfx_check_early_ioremap_leak+0x10/0x10
<4>[ 20.582455] ? __pfx_check_early_ioremap_leak+0x10/0x10
<4>[ 20.582459] do_one_initcall+0x76/0x400
<4>[ 20.582466] kernel_init_freeable+0x3da/0x6a0
<4>[ 20.582472] ? __pfx_kernel_init+0x10/0x10
<4>[ 20.582477] kernel_init+0x1b/0x200
<4>[ 20.582482] ret_from_fork+0x44/0x70
<4>[ 20.582486] ? __pfx_kernel_init+0x10/0x10
<4>[ 20.582490] ret_from_fork_asm+0x1a/0x30
<4>[ 20.582497] </TASK>
<4>[ 20.582499] irq event stamp: 82171405
<4>[ 20.582502] hardirqs last enabled at (82171413): [<ffffffff814a4d49>] __up_console_sem+0x79/0xa0
<4>[ 20.582510] hardirqs last disabled at (82171420): [<ffffffff814a4d2e>] __up_console_sem+0x5e/0xa0
<4>[ 20.582516] softirqs last enabled at (82168050): [<ffffffff813d3fbf>] __irq_exit_rcu+0x13f/0x160
<4>[ 20.582523] softirqs last disabled at (82167749): [<ffffffff813d3fbf>] __irq_exit_rcu+0x13f/0x160
<4>[ 20.582529] ---[ end trace 0000000000000000 ]---
<5>[ 20.582715] Key type .fscrypt registered
<5>[ 20.582719] Key type fscrypt-provisioning registered
<6>[ 20.585279] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 20.587232] Key type encrypted registered
<6>[ 20.587240] AppArmor: AppArmor sha256 policy hashing enabled
<6>[ 20.587345] ima: No TPM chip found, activating TPM-bypass!
<5>[ 20.587356] Loading compiled-in module X.509 certificates
<5>[ 20.588101] Loaded X.509 cert 'Build time autogenerated kernel key: 0cabaf784f97fb5d1b18ee8ef61c779d578d829e'
<6>[ 20.588112] ima: Allocated hash algorithm: sha256
<6>[ 20.588158] ima: No architecture policies found
<6>[ 20.588250] evm: Initialising EVM extended attributes:
<6>[ 20.588254] evm: security.selinux
<6>[ 20.588257] evm: security.SMACK64
<6>[ 20.588260] evm: security.SMACK64EXEC
<6>[ 20.588263] evm: security.SMACK64TRANSMUTE
<6>[ 20.588266] evm: security.SMACK64MMAP
<6>[ 20.588269] evm: security.apparmor
<6>[ 20.588271] evm: security.ima
<6>[ 20.588274] evm: security.capability
<6>[ 20.588277] evm: HMAC attrs: 0x1
<6>[ 20.590114] PM: Magic number: 13:809:959
<6>[ 20.590252] memory memory10: hash matches
<6>[ 20.590350] printk: legacy console [netcon0] enabled
<6>[ 20.590356] netconsole: network logging started
<6>[ 20.590879] RAS: Correctable Errors collector initialized.
<6>[ 20.591024] clk: Disabling unused clocks
<6>[ 20.591034] PM: genpd: Disabling unused power domains
<6>[ 20.592088] md: Waiting for all devices to be available before autodetect
<6>[ 20.592094] md: If you don't use raid, use raid=noautodetect
<6>[ 20.592098] md: Autodetecting RAID arrays.
<6>[ 20.592106] md: autorun ...
<6>[ 20.592109] md: ... autorun DONE.
<6>[ 20.632685] EXT4-fs (nvme0n1p2): mounted filesystem 9a25468b-c3fd-45e2-b59f-4eab10a53c55 ro with ordered data mode. Quota mode: none.
<6>[ 20.632758] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 20.633927] devtmpfs: mounted
<6>[ 20.644466] Freeing unused decrypted memory: 2028K
<6>[ 20.645375] Freeing unused kernel image (initmem) memory: 5632K
<6>[ 20.645397] Write protecting the kernel read-only data: 34816k
<6>[ 20.645743] Freeing unused kernel image (text/rodata gap) memory: 64K
<6>[ 20.646010] Freeing unused kernel image (rodata/data gap) memory: 972K
<6>[ 20.650636] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 20.650663] Run /sbin/init as init process
<7>[ 20.650667] with arguments:
<7>[ 20.650668] /sbin/init
<7>[ 20.650669] with environment:
<7>[ 20.650670] HOME=/
<7>[ 20.650670] TERM=linux
<7>[ 20.650671] BOOT_IMAGE=/boot/drm_intel
<7>[ 20.698223] systemd[1]: Inserted module 'autofs4'
<7>[ 20.717950] systemd[1]: systemd 255.4-1ubuntu8.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 20.717996] systemd[1]: Detected architecture x86-64.
<7>[ 20.719098] systemd[1]: Hostname set to <shard-lnl-8>.
<7>[ 20.905496] systemd[1]: Configuration file /run/systemd/system/systemd-networkd-wait-online.service.d/10-netplan.conf is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 20.906089] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 20.965258] systemd[1]: Queued start job for default target graphical.target.
<7>[ 20.991605] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 20.994573] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 20.997400] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 20.997956] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 20.999232] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 20.999436] systemd[1]: Expecting device dev-disk-by\x2duuid-BBA9\x2dCAA8.device - /dev/disk/by-uuid/BBA9-CAA8...
<7>[ 20.999586] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 20.999736] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 20.999862] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 20.999979] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 21.000105] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 21.000531] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 21.002231] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 21.002646] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 21.003084] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 21.003401] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 21.003646] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 21.003987] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 21.004351] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 21.004648] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 21.004839] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 21.005195] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 21.005444] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 21.008391] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 21.010884] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 21.013695] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 21.016559] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 21.021995] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 21.025629] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 21.028700] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 21.031767] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 21.034632] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 21.037230] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 21.040245] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 21.043560] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 21.050036] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 21.054965] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 21.060622] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 21.062688] systemd-journald[210]: Collecting audit messages is disabled.
<6>[ 21.063036] pstore: Using crash dump compression: deflate
<7>[ 21.063519] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<7>[ 21.070769] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[ 21.070952] pstore: Registered efi_pstore as persistent store backend
<7>[ 21.076150] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 21.076251] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 21.076319] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<6>[ 21.078524] fuse: init (API version 7.42)
<7>[ 21.080537] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<7>[ 21.085612] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 21.219829] EXT4-fs (nvme0n1p2): re-mounted 9a25468b-c3fd-45e2-b59f-4eab10a53c55 r/w. Quota mode: none.
<6>[ 21.258239] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:274595840k SS
<7>[ 21.270064] systemd-journald[210]: Received client request to flush runtime journal.
<7>[ 21.289978] systemd-journald[210]: /var/log/journal/2b6a2c75c75941a29794878cc3195815/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 21.290000] systemd-journald[210]: Rotating system journal.
<4>[ 21.974261] nvme nvme0: using unchecked data buffer
<6>[ 22.064032] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<6>[ 22.129317] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<6>[ 22.130865] intel-hid INTC107B:00: platform supports 5 button array
<6>[ 22.144932] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<6>[ 22.170125] pci 0000:00:05.0: Setting to D3hot
<6>[ 22.182451] pci 0000:00:0b.0: Setting to D3hot
<4>[ 22.194167] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 22.194456] intel_pmc_core INT33A1:00: initialized
<5>[ 22.322610] audit: type=1400 audit(1740095779.321:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=432 comm="apparmor_parser"
<5>[ 22.323984] audit: type=1400 audit(1740095779.322:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=433 comm="apparmor_parser"
<5>[ 22.324733] audit: type=1400 audit(1740095779.323:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=434 comm="apparmor_parser"
<5>[ 22.327174] audit: type=1400 audit(1740095779.325:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=436 comm="apparmor_parser"
<5>[ 22.327415] audit: type=1400 audit(1740095779.326:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=437 comm="apparmor_parser"
<5>[ 22.329315] audit: type=1400 audit(1740095779.328:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=440 comm="apparmor_parser"
<5>[ 22.329806] audit: type=1400 audit(1740095779.328:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=438 comm="apparmor_parser"
<5>[ 22.333711] audit: type=1400 audit(1740095779.332:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=441 comm="apparmor_parser"
<5>[ 22.333996] audit: type=1400 audit(1740095779.333:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=442 comm="apparmor_parser"
<5>[ 22.338443] audit: type=1400 audit(1740095779.337:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=443 comm="apparmor_parser"
<3>[ 22.429499] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<3>[ 22.458566] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<6>[ 22.647916] ACPI: bus type thunderbolt registered
<6>[ 22.669360] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 22.671225] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 22.686926] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 22.702148] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 22.725891] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 22.726921] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[ 22.726927] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[ 22.731129] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 22.731136] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 22.731269] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 22.732460] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 22.783449] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 22.790219] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 22.799425] intel_rapl_common: Found RAPL domain package
<6>[ 22.799435] intel_rapl_common: Found RAPL domain dram
<6>[ 22.802696] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[ 22.919883] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, e4:fa:c4:a4:ee:2f, XID 541, IRQ 184
<6>[ 22.919892] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[ 22.922345] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 22.927691] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
<6>[ 22.927699] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 22.927700] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 22.927702] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 22.927703] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 22.944021] cryptd: max_cpu_qlen set to 1000
<6>[ 23.010153] AES CTR mode by8 optimization enabled
<4>[ 23.066536] block nvme0n1: No UUID available providing old NGUID
<6>[ 23.224121] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[ 23.341893] evm: overlay not supported
<6>[ 23.406983] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:35:91
<6>[ 23.406992] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[ 23.407112] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[ 23.417156] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[ 23.446973] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[ 23.446978] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[ 23.446980] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<6>[ 23.704307] intel_rapl_common: Found RAPL domain package
<6>[ 23.704313] intel_rapl_common: Found RAPL domain core
<6>[ 23.704317] intel_rapl_common: Found RAPL domain dram
<6>[ 23.704319] intel_rapl_common: Found RAPL domain psys
<6>[ 23.740009] loop0: detected capacity change from 0 to 8
<6>[ 23.920736] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<6>[ 23.929143] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<4>[ 23.999636] spi-nor spi0.0: supply vcc not found, using dummy regulator
<5>[ 24.013671] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 24.013691] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 24.072141] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[ 24.232251] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[ 24.437941] hid: raw HID events driver (C) Jiri Kosina
<6>[ 24.444149] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 24.478162] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 24.479436] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 24.480762] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 24.481440] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 24.483549] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 24.484186] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 24.489526] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 24.493417] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 24.497463] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 24.500565] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 24.504102] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 24.506552] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 25.207931] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 25.207971] typec port0: bound usb2-port1 (ops connector_ops)
<6>[ 26.210087] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 26.210123] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 27.889458] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<7>[ 35.534593] systemd-journald[210]: /var/log/journal/2b6a2c75c75941a29794878cc3195815/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 53.998243] [IGT] xe_module_load: executing
<7>[ 54.014004] [IGT] xe_module_load: starting subtest load
<6>[ 54.194707] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 54.196415] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[ 54.196426] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG / Xe2_HPG / Xe3_LPG (20.04) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 54.196519] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 54.196596] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 54.209310] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 54.213296] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 54.213388] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 54.213459] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 54.213520] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 54.213577] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 54.213632] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 54.213687] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 54.213740] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 54.213792] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 54.213844] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 54.213983] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 54.214047] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 54.214110] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 54.214170] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 54.214221] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 54.214320] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 54.215239] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000068 [0x34/00]
<7>[ 54.215323] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 54.224901] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 54.225907] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 54.226028] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 54.226175] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,0000007f
<7>[ 54.226285] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,0000007f
<7>[ 54.226390] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 54.226491] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 54.226594] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 54.227374] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 54.231647] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 54.231795] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 54.231954] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 54.232087] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 54.232210] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 54.232332] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 54.232458] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 54.232604] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 54.232731] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 54.232861] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 54.232983] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 54.233102] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 54.233214] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 54.233339] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 54.235262] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 54.238010] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1263
<6>[ 54.239031] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 54.239145] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 54.239278] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 54.240788] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 54.240974] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 54.260900] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 54.261374] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 54.261577] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 54.261792] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 54.262040] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 54.262233] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 54.262416] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 54.262590] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 54.263339] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 54.263716] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[ 54.264048] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7>[ 54.264364] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 54.264658] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 54.264902] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 54.265133] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 54.265361] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 54.265633] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 54.265921] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 54.266191] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 54.266449] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 54.266726] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 54.267011] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 54.267306] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 54.267550] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 54.267767] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 54.267996] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 54.268196] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 54.268410] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 54.268599] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 54.268779] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 54.268970] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 54.269138] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 54.269327] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 54.269509] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 54.269689] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 54.269841] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 54.270018] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 54.270170] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 54.270319] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 54.270461] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 54.270601] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 54.270733] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 54.270867] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 54.271007] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 54.271128] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 54.271244] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 54.271358] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 54.271471] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 54.271590] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 54.272093] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 54.272235] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 54.272383] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 54.272527] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 54.272647] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 54.272773] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 54.272890] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 54.272993] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 54.273089] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 54.273193] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 54.273290] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 54.273385] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 54.273477] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 54.273574] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 54.273668] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 54.273770] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 54.273874] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 54.273964] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 54.274056] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 54.274143] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 54.274228] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 54.274311] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 54.274394] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 54.274474] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 54.274554] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 54.274632] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 54.274707] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 54.274790] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 54.274918] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 54.275070] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 54.275214] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 54.275370] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 54.275534] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 54.275661] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 54.275752] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 54.275841] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 54.275989] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 54.276099] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=mem
<7>[ 54.276124] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 54.276235] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 54.276329] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 54.276422] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 54.276710] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 54.276878] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 54.277454] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 54.277552] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 54.277637] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 9 (9.0 usec)
<7>[ 54.277714] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 103 (103.0 usec)
<7>[ 54.277788] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 103 (103.0 usec)
<7>[ 54.277866] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 103 (103.0 usec)
<7>[ 54.277959] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 96 (96.0 usec)
<7>[ 54.278051] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 103 (103.0 usec)
<7>[ 54.279894] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 54.280026] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 54.280144] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 54.280245] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 54.280335] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 54.280423] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7>[ 54.280524] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 54.280607] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 54.280745] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 54.280923] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 54.281073] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 54.281220] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 54.281364] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 54.281506] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7>[ 54.281654] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 54.281794] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 54.281945] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 54.282083] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 54.282219] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 54.282357] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 54.282502] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 54.282645] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7>[ 54.282793] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 54.282946] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 54.283085] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 54.283217] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 54.283345] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 54.283470] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 54.283594] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 54.283715] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<7>[ 54.284143] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[ 54.287725] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 54.287909] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 54.288074] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[ 54.288318] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:204:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 54.288567] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:204:DDI A/PHY A]
<7>[ 54.288825] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 54.289008] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 54.289161] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 54.289317] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 54.289485] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 54.289646] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 54.289783] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 54.289930] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 54.290064] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 54.290242] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:204:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 54.290515] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 54.290655] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 54.290796] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 54.290946] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 54.291080] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 54.291361] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 54.291670] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 54.292917] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 54.293265] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<6>[ 54.294897] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7>[ 54.295807] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 54.296436] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 54.297446] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e
<7>[ 54.299154] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 54.299724] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 54.301895] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 54.311914] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 54.311932] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.311934] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.311935] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 54.311939] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.311940] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor
<5>[ 54.311946] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.311947] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 20, SAD count 0
<5>[ 54.311950] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.312001] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.312003] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.312004] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.312015] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:205:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 54.312575] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:205:eDP-1] Performing OUI wait (0 ms)
<7>[ 54.313089] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:205:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 54.313203] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:205:eDP-1] DRRS type: none
<7>[ 54.313353] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:205:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 54.313488] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:205:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 54.313683] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 54.313787] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 54.313889] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 54.313979] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 54.314064] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 54.314179] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 54.314417] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:213:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 54.314609] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 54.314765] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:213:DDI TC1/PHY TC1]
<7>[ 54.315243] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:225:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 54.315384] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 54.315510] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:225:DDI TC2/PHY TC2]
<7>[ 54.315805] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:233:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 54.315947] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 54.316084] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:233:DDI TC3/PHY TC3]
<7>[ 54.316670] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:88:pipe A] hw state readout: enabled
<7>[ 54.316818] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:145:pipe B] hw state readout: disabled
<7>[ 54.316960] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:202:pipe C] hw state readout: disabled
<7>[ 54.317052] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: enabled, pipe A
<7>[ 54.317140] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A
<7>[ 54.317225] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A
<7>[ 54.317309] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A
<7>[ 54.317391] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A
<7>[ 54.317475] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A
<7>[ 54.317557] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] hw state readout: disabled, pipe B
<7>[ 54.317639] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] hw state readout: disabled, pipe B
<7>[ 54.317721] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] hw state readout: disabled, pipe B
<7>[ 54.317803] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] hw state readout: disabled, pipe B
<7>[ 54.317891] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] hw state readout: disabled, pipe B
<7>[ 54.317974] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] hw state readout: disabled, pipe B
<7>[ 54.318055] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] hw state readout: disabled, pipe C
<7>[ 54.318136] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] hw state readout: disabled, pipe C
<7>[ 54.318217] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] hw state readout: disabled, pipe C
<7>[ 54.318299] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] hw state readout: disabled, pipe C
<7>[ 54.318380] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] hw state readout: disabled, pipe C
<7>[ 54.318461] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] hw state readout: disabled, pipe C
<7>[ 54.319269] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 54.319400] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:204:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 54.319510] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 54.319613] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 54.319703] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:215:DP-MST A] hw state readout: disabled, pipe A
<7>[ 54.319789] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:216:DP-MST B] hw state readout: disabled, pipe B
<7>[ 54.319884] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DP-MST C] hw state readout: disabled, pipe C
<7>[ 54.319974] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 54.320062] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:225:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 54.320146] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:227:DP-MST A] hw state readout: disabled, pipe A
<7>[ 54.320227] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:228:DP-MST B] hw state readout: disabled, pipe B
<7>[ 54.320306] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:229:DP-MST C] hw state readout: disabled, pipe C
<7>[ 54.320389] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 54.320475] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:233:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 54.320555] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:235:DP-MST A] hw state readout: disabled, pipe A
<7>[ 54.320634] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:236:DP-MST B] hw state readout: disabled, pipe B
<7>[ 54.320712] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:237:DP-MST C] hw state readout: disabled, pipe C
<7>[ 54.320829] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:205:eDP-1] hw state readout: enabled
<7>[ 54.320926] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:214:DP-1] hw state readout: disabled
<7>[ 54.321011] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:226:DP-2] hw state readout: disabled
<7>[ 54.321093] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:234:DP-3] hw state readout: disabled
<7>[ 54.321380] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 173855 kHz
<7>[ 54.321474] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz
<7>[ 54.321554] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz
<7>[ 54.321632] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz
<7>[ 54.321708] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz
<7>[ 54.321784] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz
<7>[ 54.321869] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 54.321989] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] min_cdclk 0 kHz
<7>[ 54.322075] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] min_cdclk 0 kHz
<7>[ 54.322155] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] min_cdclk 0 kHz
<7>[ 54.322232] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] min_cdclk 0 kHz
<7>[ 54.322309] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] min_cdclk 0 kHz
<7>[ 54.322387] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] min_cdclk 0 kHz
<7>[ 54.322464] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7>[ 54.322579] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] min_cdclk 0 kHz
<7>[ 54.322669] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] min_cdclk 0 kHz
<7>[ 54.322751] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] min_cdclk 0 kHz
<7>[ 54.322832] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] min_cdclk 0 kHz
<7>[ 54.322917] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] min_cdclk 0 kHz
<7>[ 54.322996] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] min_cdclk 0 kHz
<7>[ 54.323072] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7>[ 54.323227] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[ 54.323342] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A
<7>[ 54.323578] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: yes [setup_hw_state]
<7>[ 54.323692] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 54.323796] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 54.323903] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 54.324001] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 54.324096] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 54.324189] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 54.324280] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 54.324371] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 54.324463] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 54.324554] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 54.324643] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 54.324734] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 54.324823] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 54.324929] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 54.325021] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0
<7>[ 54.325111] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96
<7>[ 54.325201] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906
<7>[ 54.325289] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 54.325379] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 54.325468] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 54.325558] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 54.325647] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 54.325735] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 54.325825] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 54.325919] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 54.326008] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 54.326096] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 54.326184] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 54.326272] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 54.326360] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 54.326447] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 54.326535] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.326623] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.326709] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.326796] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 54.326892] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 54.326982] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.327070] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.327160] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.327248] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 54.327336] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [setup_hw_state]
<7>[ 54.327423] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [setup_hw_state]
<7>[ 54.327663] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:88:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 54.327766] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:145:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 54.327864] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:202:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 54.328203] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:88:pipe A][PLANE:33:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 54.328294] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:33:plane 1A] on [CRTC:88:pipe A]
<7>[ 54.369132] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<7>[ 54.433194] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<6>[ 54.565929] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 54.565933] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 54.565934] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 54.566004] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[ 54.566163] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 54.566247] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 54.566320] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 54.566410] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[ 54.566491] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[ 54.566583] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[ 54.566647] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 54.566712] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 54.566774] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 54.567548] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 54.567616] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 54.567685] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 54.567751] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 54.567815] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 54.567889] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 54.567955] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 54.568029] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 54.568106] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 54.568168] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 54.568231] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 54.568292] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 54.568351] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 54.568409] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 54.568466] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 54.568522] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 54.568578] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 54.568632] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 54.568686] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 54.568739] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 54.568794] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 54.568853] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 54.568909] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 54.568964] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 54.569024] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 54.569085] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 54.569157] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 54.569230] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 54.569303] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[ 54.569372] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[ 54.569430] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[ 54.569485] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 54.569541] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 54.569597] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 54.569655] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 54.569711] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 54.569772] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 54.569830] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 54.570166] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 54.570235] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 54.570293] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 54.570517] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 54.570567] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 54.570614] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 54.570830] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 54.570889] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7>[ 54.570950] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 54.571015] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[ 54.571074] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[ 54.571132] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[ 54.571480] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 54.571544] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[ 54.571604] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[ 54.571662] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 54.571719] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 54.571775] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 54.571832] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 54.571897] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 54.571962] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 54.572023] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 54.572084] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 54.572144] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 54.572204] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 54.572253] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 54.572317] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 54.572577] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 54.574750] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[ 54.587786] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[ 54.588549] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 54.588618] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 54.597906] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 54.598268] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 54.599164] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 54.599243] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 54.599315] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[ 54.599381] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 54.599449] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ca18000
<7>[ 54.599512] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 54.599575] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 54.599635] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 54.599697] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 54.603016] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 54.603100] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7>[ 54.603179] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 54.605121] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 54.608217] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 54.608220] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 54.608221] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 54.608222] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 54.608223] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 54.608223] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 54.608224] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 54.608225] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 54.608226] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 54.608227] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 54.608254] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[ 54.608370] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[ 54.608465] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[ 54.609066] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 54.609173] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 54.609266] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 54.609348] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 54.609421] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 54.609491] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 54.609557] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 54.609624] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 54.609697] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 54.609768] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 54.609837] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 54.609927] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 54.610007] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 54.610085] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 54.610162] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 54.610224] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 54.610293] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 54.610354] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 54.610413] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 54.610474] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 54.610536] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 54.610596] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 54.610655] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 54.610713] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 54.610768] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 54.610819] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 54.610897] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 54.611487] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 54.611573] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 54.611891] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 54.611983] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 54.612441] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 54.612513] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 54.612580] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[ 54.612643] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 54.612701] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 54.612760] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 54.612817] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 54.612920] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 54.612990] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 54.613058] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 54.613124] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 54.613184] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 54.613236] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 54.613286] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 54.613354] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 54.613436] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 54.628239] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[ 54.629311] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 54.629527] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 54.648050] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 18ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 54.648421] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 54.649734] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 54.651762] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 54.653346] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 54.694895] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 54.696633] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 54.697022] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:88:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 54.697347] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0
<7>[ 54.697643] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 54.697903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 54.698187] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 54.698443] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 54.698688] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 54.698941] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 54.700417] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 54.701318] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 54.701582] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 54.716872] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 54.726387] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:205:eDP-1] adding connector to sysfs
<7>[ 54.731403] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:205:eDP-1] backlight device intel_backlight registered
<7>[ 54.732407] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 54.735382] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:205:eDP-1] generating connector hotplug event
<7>[ 54.735508] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:214:DP-1] adding connector to sysfs
<7>[ 54.736114] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 54.737173] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:214:DP-1] generating connector hotplug event
<7>[ 54.737224] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:226:DP-2] adding connector to sysfs
<7>[ 54.737660] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 54.738284] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:226:DP-2] generating connector hotplug event
<7>[ 54.738321] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:234:DP-3] adding connector to sysfs
<7>[ 54.738665] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 54.739218] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:234:DP-3] generating connector hotplug event
<6>[ 54.739247] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 54.739276] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 54.746621] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 54.749005] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 54.749956] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 54.750071] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 54.751101] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:33:plane 1A] no fb, skipping
<7>[ 54.751194] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:145:pipe B] not active, skipping
<7>[ 54.751281] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:202:pipe C] not active, skipping
<7>[ 54.751365] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[ 54.751532] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 54.751700] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:205:eDP-1]
<7>[ 54.751714] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:205:eDP-1]
<7>[ 54.752321] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 54.752840] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 54.752981] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 54.753089] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 54.753282] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 54.753288] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.753290] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.753291] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 54.753293] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.753295] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor
<5>[ 54.753299] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.753300] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 20, SAD count 0
<5>[ 54.753303] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.753322] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] VRR capable: yes
<7>[ 54.753433] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 54.754096] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 54.754194] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 54.755146] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:205:eDP-1] status updated from unknown to connected
<5>[ 54.755340] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.755342] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.755343] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.755376] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:205:eDP-1] probed modes:
<7>[ 54.755386] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 54.755396] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:214:DP-1]
<7>[ 54.755405] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1]
<7>[ 54.755546] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 54.755670] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:214:DP-1] status updated from unknown to disconnected
<7>[ 54.755681] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:214:DP-1] disconnected
<7>[ 54.755689] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:226:DP-2]
<7>[ 54.755697] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2]
<7>[ 54.755825] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 54.755958] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:226:DP-2] status updated from unknown to disconnected
<7>[ 54.755968] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:226:DP-2] disconnected
<7>[ 54.755977] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:234:DP-3]
<7>[ 54.755985] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3]
<7>[ 54.756116] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 54.756219] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:234:DP-3] status updated from unknown to disconnected
<7>[ 54.756227] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:234:DP-3] disconnected
<7>[ 54.756234] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] enabled? yes
<7>[ 54.756237] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:214:DP-1] enabled? no
<7>[ 54.756239] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:226:DP-2] enabled? no
<7>[ 54.756241] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:234:DP-3] enabled? no
<7>[ 54.756301] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 54.756310] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] looking for cmdline mode
<7>[ 54.756313] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] looking for preferred mode, tile 0
<7>[ 54.756315] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] Found mode 2880x1800
<7>[ 54.756317] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 54.756328] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 54.756357] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 54.756406] xe 0000:00:02.0: [drm:intelfb_create [xe]] no BIOS fb, allocating a new one
<7>[ 54.756447] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1]
<7>[ 54.756608] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2]
<7>[ 54.756728] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3]
<7>[ 54.758145] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 54.763325] xe 0000:00:02.0: [drm:intelfb_create [xe]] allocated 2880x1800 fb: 0x01d8f000
<6>[ 54.764099] fbcon: xedrmfb (fb0) is primary device
<7>[ 54.764995] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 54.765142] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 54.765241] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 54.765339] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 54.765430] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A]
<7>[ 54.765520] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 54.765610] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 54.765696] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 54.765781] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 54.765873] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 54.765984] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 54.766094] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 54.766201] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 54.766307] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 54.766398] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 54.766484] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 54.766564] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 54.766643] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 54.766722] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 54.766812] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 54.766936] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 54.767039] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 54.767138] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 54.767234] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 54.767315] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 54.767388] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 54.767466] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 54.767543] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 54.767621] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 54.767719] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 54.767822] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] fastset requirement not met, forcing full modeset
<7>[ 54.767982] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 54.768099] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 54.768211] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 3, 1 -> 2, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 54.768316] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] blocks 25, 25, 25, 25, 25, 25, 0, 0, 7, 73, 7 -> 49, 289, 289, 289, 265, 289, 0, 0, 63, 73, 87
<7>[ 54.768413] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 319, 319, 319, 293, 319, 0, 0, 64, 82, 88
<7>[ 54.768504] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 54.768593] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.768672] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.768742] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.768815] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 54.768902] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.768996] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.769080] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.769161] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 54.769235] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.769314] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.769396] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.769471] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 54.769531] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.769589] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.769647] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.769705] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 54.769766] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.769830] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.769915] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.770007] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1390840 num active planes 1
<7>[ 54.770136] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 54.770243] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 54.770323] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 54.770402] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 54.770487] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 54.770592] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 54.770720] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: yes [modeset]
<7>[ 54.770842] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 54.770976] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 54.771077] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 54.771179] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 54.771281] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 54.771369] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 54.771456] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 54.771541] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 54.771624] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 54.771700] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 54.771779] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 54.771870] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 54.771969] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 54.772065] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 54.772158] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 54.772245] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 54.772314] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 54.772381] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 54.772449] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 54.772520] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 54.772590] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[ 54.772658] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 2859, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7>[ 54.772727] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 2753, vmin vtotal: 1906, vmax vtotal: 2859
<7>[ 54.772795] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 54.772868] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 54.772950] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 54.773031] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 54.773116] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 54.773204] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 54.773281] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 54.773368] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 54.773453] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 54.773535] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 54.773611] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 54.773678] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 54.773744] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 54.773806] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 54.773878] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.773958] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.774036] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.774114] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 54.774198] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 54.774267] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.774336] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.774402] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.774465] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 54.774531] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:206] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 54.774599] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 54.774664] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 54.774736] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:43:plane 2A] fb: [NOFB], visible: no
<7>[ 54.774808] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:53:plane 3A] fb: [NOFB], visible: no
<7>[ 54.774899] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 4A] fb: [NOFB], visible: no
<7>[ 54.774980] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:73:plane 5A] fb: [NOFB], visible: no
<7>[ 54.775061] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:83:cursor A] fb: [NOFB], visible: no
<7>[ 54.785061] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<6>[ 54.799035] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 54.799409] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[ 54.822270] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 54.993083] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:205:eDP-1] set backlight PWM = 0
<7>[ 54.994337] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 55.004552] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 55.004909] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 55.005214] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - short
<7>[ 55.005573] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 55.005874] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 55.058401] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 55.058730] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - short
<7>[ 55.088921] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 55.089347] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 55.089329] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:204:DDI A/PHY A]
<7>[ 55.090207] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 55.090204] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:204:DDI A/PHY A]
<7>[ 55.090507] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:204:DDI A/PHY A]
<7>[ 55.090786] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DDI TC1/PHY TC1]
<7>[ 55.091030] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:215:DP-MST A]
<7>[ 55.091238] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:216:DP-MST B]
<7>[ 55.091477] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DP-MST C]
<7>[ 55.091687] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:225:DDI TC2/PHY TC2]
<7>[ 55.091903] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:227:DP-MST A]
<7>[ 55.092182] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 55.092397] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - long
<7>[ 55.092601] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 55.092803] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:228:DP-MST B]
<7>[ 55.092835] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:204:DDI A/PHY A]
<7>[ 55.093009] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:229:DP-MST C]
<7>[ 55.093226] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:233:DDI TC3/PHY TC3]
<7>[ 55.093412] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:235:DP-MST A]
<7>[ 55.093595] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:236:DP-MST B]
<7>[ 55.093778] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:237:DP-MST C]
<7>[ 55.094004] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 55.095621] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 55.095931] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power cycle (494 ms remaining)
<7>[ 55.224093] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 55.593258] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7>[ 55.593585] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 55.593936] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 55.594203] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 55.630666] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 55.630955] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - long
<7>[ 55.631210] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 55.631577] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:204:DDI A/PHY A]
<7>[ 55.761552] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 55.761553] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 55.761553] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 55.893068] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 55.895899] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 55.896221] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 55.899326] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 55.900574] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 55.901582] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 55.902636] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 55.903698] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 55.904901] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 55.905146] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 55.906655] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 55.906904] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 55.907618] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 55.907987] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 55.908221] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 55.908484] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:205:eDP-1] set backlight PWM = 192000
<6>[ 55.910071] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 55.910090] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 55.910361] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:33:plane 1A]
<7>[ 55.925496] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 55.927451] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:205:eDP-1]
<7>[ 55.927785] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A]
<7>[ 55.929195] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 55.931534] Console: switching to colour frame buffer device 180x56
<6>[ 55.946192] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 55.963024] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 55.963214] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 55.963252] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 55.963364] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 55.963635] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 55.963775] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:205:eDP-1]
<7>[ 55.963806] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:205:eDP-1]
<7>[ 55.963901] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 55.964138] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 55.964361] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 55.964618] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 55.964814] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 55.965032] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 55.965085] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 55.965222] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 55.965402] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 55.965583] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 55.965757] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 55.965838] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 55.965953] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 55.966125] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 55.966138] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 55.966294] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 55.966398] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 55.966505] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 55.966708] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 55.966878] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 55.966889] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 55.966893] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 55.966896] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 55.966906] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 55.966911] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor
<5>[ 55.966923] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 55.966927] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 20, SAD count 0
<5>[ 55.966933] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 55.966915] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 55.966969] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] VRR capable: yes
<7>[ 55.967107] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 55.967224] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 55.967287] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 55.967493] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 55.968142] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 55.968415] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 55.968519] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[ 55.968771] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 55.969041] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 55.969363] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 55.969702] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[ 55.970066] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<5>[ 55.971883] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 55.971893] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 55.971897] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 55.971983] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:205:eDP-1] probed modes:
<7>[ 55.972028] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 55.972052] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:214:DP-1]
<7>[ 55.972074] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1]
<7>[ 55.972436] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 55.972739] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 55.973032] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 55.973345] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 55.973627] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:214:DP-1] disconnected
<7>[ 55.973652] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:226:DP-2]
<7>[ 55.973672] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2]
<7>[ 55.973978] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 55.974243] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:226:DP-2] disconnected
<7>[ 55.974265] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:234:DP-3]
<7>[ 55.974284] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3]
<7>[ 55.974593] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 55.974866] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:234:DP-3] disconnected
<7>[ 55.974887] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] enabled? yes
<7>[ 55.974897] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:214:DP-1] enabled? no
<7>[ 55.974904] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:226:DP-2] enabled? no
<7>[ 55.974909] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:234:DP-3] enabled? no
<7>[ 55.975059] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7>[ 55.975179] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 55.975207] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] looking for cmdline mode
<7>[ 55.975214] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] looking for preferred mode, tile 0
<7>[ 55.975220] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] Found mode 2880x1800
<7>[ 55.975225] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 55.975262] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 55.977583] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 55.977885] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[ 55.992674] xe 0000:00:02.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<6>[ 56.021216] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[ 56.022837] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7>[ 56.023933] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[ 56.024294] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 56.041577] xe 0000:00:02.0: [drm:drm_client_dev_restore] intel-fbdev: ret=0
<7>[ 56.041690] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 56.041757] [IGT] xe_module_load: exiting, ret=0
<7>[ 56.062151] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 56.062329] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 56.062468] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 56.062598] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 56.062748] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 56.062908] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 56.063049] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 56.063188] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 56.063326] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 56.063464] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 56.063601] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 56.063727] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 56.063810] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 56.063899] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 56.063983] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 56.064065] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 56.064148] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 56.064230] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 56.064313] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 56.064395] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 56.064475] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 56.064556] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 56.064636] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 56.064718] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 56.064799] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 56.064899] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 56.064982] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 56.065063] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 56.065144] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 56.065224] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 56.065305] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 56.065386] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 56.065466] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 56.065546] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 56.065626] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 56.065706] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<6>[ 56.077152] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<7>[ 56.081340] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 56.081495] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 56.081612] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<6>[ 56.082139] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 56.082985] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 56.083959] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 56.097932] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[ 56.098053] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:205:eDP-1] set backlight level = 13892
<7>[ 56.976955] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 56.976939] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 56.976937] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 57.319681] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 58.513987] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 58.514351] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067