<5>[ 0.000000] Linux version 6.14.0-rc3-xe+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Mon Feb 17 08:40:34 UTC 2025
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro earlyprintk=xdbc1,keep usbcore.autosuspend=-1
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001053fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000105400000-0x000000087f7fffff] usable
<5>[ 0.000000] xhci_dbc:early_xdbc_parse_parameter: dbgp_num: 1
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x68f86018 ESRT=0x68f97a98 MOKvar=0x6cd0c000
<6>[ 0.000000] efi: Remove mem277: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem279: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D97.2411281331 11/28/2024
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000018] MTRR map: 10 entries (3 fixed + 7 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000377] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000378] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004661] esrt: Reserving ESRT space from 0x0000000068f97a98 to 0x0000000068f97be8.
<7>[ 0.004670] e820: update [mem 0x68f97000-0x68f97fff] usable ==> reserved
<6>[ 0.004688] Using GB pages for direct mapping
<6>[ 0.005322] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[ 0.005323] printk: early log buf free: 258848(98%)
<6>[ 0.005323] Secure boot disabled
<6>[ 0.005325] ACPI: Early table checksum verification disabled
<6>[ 0.005328] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.005331] ACPI: XSDT 0x000000006FF7C228 00019C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005335] ACPI: FACP 0x000000006FFAB000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.005338] ACPI: DSDT 0x000000006FFB7000 025212 (v02 INTEL LNL 00000002 01000013)
<6>[ 0.005340] ACPI: FACS 0x000000006FEF1000 000040
<6>[ 0.005341] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.005342] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.005344] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.005345] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.005346] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.005348] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.005349] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.005350] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.005352] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.005353] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.005354] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.005356] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.005357] ACPI: SSDT 0x000000006FFE8000 002460 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.005358] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.005360] ACPI: SSDT 0x000000006FFDE000 008F36 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.005361] ACPI: SSDT 0x000000006FFDD000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.005362] ACPI: SSDT 0x000000006FFB2000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.005363] ACPI: SSDT 0x000000006FFB0000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.005365] ACPI: SSDT 0x000000006FFAC000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.005366] ACPI: HPET 0x000000006FFAA000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005367] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005368] ACPI: APIC 0x000000006FFA8000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.005370] ACPI: MCFG 0x000000006FFA7000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005371] ACPI: SSDT 0x000000006FFA6000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.005372] ACPI: SSDT 0x000000006FFA0000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.005374] ACPI: SSDT 0x000000006FF95000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.005375] ACPI: LPIT 0x000000006FF94000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005376] ACPI: SSDT 0x000000006FF93000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.005377] ACPI: SSDT 0x000000006FF92000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.005379] ACPI: DBGP 0x000000006FF91000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005380] ACPI: DBG2 0x000000006FF90000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005381] ACPI: NHLT 0x000000006FF8F000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005383] ACPI: SSDT 0x000000006FF8D000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.005384] ACPI: SSDT 0x000000006FF86000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.005385] ACPI: ECDT 0x000000006FF85000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.005386] ACPI: DMAR 0x000000006FF84000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005388] ACPI: FPDT 0x000000006FF83000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005389] ACPI: SSDT 0x000000006FF82000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.005390] ACPI: SSDT 0x000000006FF80000 001122 (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.005392] ACPI: SSDT 0x000000006FF7D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.005393] ACPI: SDEV 0x000000006FFA9000 000046 (v01 00000000 00000000)
<6>[ 0.005394] ACPI: SSDT 0x000000006FF71000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.005395] ACPI: SSDT 0x000000006FF63000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.005397] ACPI: ASF! 0x000000006FF62000 000074 (v32 INTEL LNL 00000002 01000013)
<6>[ 0.005398] ACPI: PHAT 0x000000006FF61000 0006E0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.005399] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005400] ACPI: Reserving FACP table memory at [mem 0x6ffab000-0x6ffab113]
<6>[ 0.005401] ACPI: Reserving DSDT table memory at [mem 0x6ffb7000-0x6ffdc211]
<6>[ 0.005402] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f]
<6>[ 0.005402] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.005402] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.005403] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.005403] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.005403] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.005403] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.005404] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.005404] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.005404] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.005404] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.005405] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.005405] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.005405] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea45f]
<6>[ 0.005406] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.005406] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe6f35]
<6>[ 0.005406] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0df]
<6>[ 0.005406] ACPI: Reserving SSDT table memory at [mem 0x6ffb2000-0x6ffb6ac2]
<6>[ 0.005407] ACPI: Reserving SSDT table memory at [mem 0x6ffb0000-0x6ffb140e]
<6>[ 0.005407] ACPI: Reserving SSDT table memory at [mem 0x6ffac000-0x6ffaf955]
<6>[ 0.005407] ACPI: Reserving HPET table memory at [mem 0x6ffaa000-0x6ffaa037]
<6>[ 0.005408] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.005408] ACPI: Reserving APIC table memory at [mem 0x6ffa8000-0x6ffa80d7]
<6>[ 0.005408] ACPI: Reserving MCFG table memory at [mem 0x6ffa7000-0x6ffa703b]
<6>[ 0.005408] ACPI: Reserving SSDT table memory at [mem 0x6ffa6000-0x6ffa66e2]
<6>[ 0.005409] ACPI: Reserving SSDT table memory at [mem 0x6ffa0000-0x6ffa5320]
<6>[ 0.005409] ACPI: Reserving SSDT table memory at [mem 0x6ff95000-0x6ff9f469]
<6>[ 0.005409] ACPI: Reserving LPIT table memory at [mem 0x6ff94000-0x6ff940cb]
<6>[ 0.005410] ACPI: Reserving SSDT table memory at [mem 0x6ff93000-0x6ff93d5b]
<6>[ 0.005410] ACPI: Reserving SSDT table memory at [mem 0x6ff92000-0x6ff921ef]
<6>[ 0.005410] ACPI: Reserving DBGP table memory at [mem 0x6ff91000-0x6ff91033]
<6>[ 0.005411] ACPI: Reserving DBG2 table memory at [mem 0x6ff90000-0x6ff90053]
<6>[ 0.005411] ACPI: Reserving NHLT table memory at [mem 0x6ff8f000-0x6ff8f2e2]
<6>[ 0.005411] ACPI: Reserving SSDT table memory at [mem 0x6ff8d000-0x6ff8e15b]
<6>[ 0.005411] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff8c53a]
<6>[ 0.005412] ACPI: Reserving ECDT table memory at [mem 0x6ff85000-0x6ff85068]
<6>[ 0.005412] ACPI: Reserving DMAR table memory at [mem 0x6ff84000-0x6ff840d7]
<6>[ 0.005412] ACPI: Reserving FPDT table memory at [mem 0x6ff83000-0x6ff83043]
<6>[ 0.005413] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff8286c]
<6>[ 0.005413] ACPI: Reserving SSDT table memory at [mem 0x6ff80000-0x6ff81121]
<6>[ 0.005413] ACPI: Reserving SSDT table memory at [mem 0x6ff7d000-0x6ff7f462]
<6>[ 0.005413] ACPI: Reserving SDEV table memory at [mem 0x6ffa9000-0x6ffa9045]
<6>[ 0.005414] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff7b4f9]
<6>[ 0.005414] ACPI: Reserving SSDT table memory at [mem 0x6ff63000-0x6ff70815]
<6>[ 0.005414] ACPI: Reserving ASF! table memory at [mem 0x6ff62000-0x6ff62073]
<6>[ 0.005415] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff616df]
<6>[ 0.005415] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037]
<6>[ 0.005480] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005680] No NUMA configuration found
<6>[ 0.005681] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005686] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<5>[ 5.230928] xhci_dbc:early_xdbc_setup_hardware: failed to setup the connection to host
<6>[ 5.230959] Zone ranges:
<6>[ 5.230960] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 5.230961] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 5.230962] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 5.230962] Device empty
<6>[ 5.230963] Movable zone start for each node
<6>[ 5.230963] Early memory node ranges
<6>[ 5.230964] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 5.230965] node 0: [mem 0x0000000000100000-0x000000006cac0fff]
<6>[ 5.230965] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 5.230965] node 0: [mem 0x0000000105400000-0x000000087f7fffff]
<6>[ 5.230967] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 5.230971] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 5.230988] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 5.233021] On node 0, zone DMA32: 13630 pages in unavailable ranges
<6>[ 5.261597] On node 0, zone Normal: 21504 pages in unavailable ranges
<6>[ 5.261661] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 5.262145] ACPI: PM-Timer IO Port: 0x1808
<6>[ 5.262150] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 5.262201] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 5.262203] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 5.262204] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 5.262206] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 5.262207] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 5.262218] e820: update [mem 0x68f42000-0x68f5cfff] usable ==> reserved
<6>[ 5.262224] TSC deadline timer available
<6>[ 5.262226] CPU topo: Max. logical packages: 1
<6>[ 5.262227] CPU topo: Max. logical dies: 1
<6>[ 5.262227] CPU topo: Max. dies per package: 1
<6>[ 5.262228] CPU topo: Max. threads per core: 1
<6>[ 5.262229] CPU topo: Num. cores per package: 8
<6>[ 5.262229] CPU topo: Num. threads per package: 8
<6>[ 5.262229] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 5.262241] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 5.262243] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 5.262244] PM: hibernation: Registered nosave memory: [mem 0x68f42000-0x68f5cfff]
<6>[ 5.262244] PM: hibernation: Registered nosave memory: [mem 0x68f97000-0x68f97fff]
<6>[ 5.262245] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fe67fff]
<6>[ 5.262245] PM: hibernation: Registered nosave memory: [mem 0x6fe68000-0x6ff4ffff]
<6>[ 5.262246] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 5.262246] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 5.262247] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 5.262247] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 5.262247] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 5.262248] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1053fffff]
<6>[ 5.262249] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 5.262250] Booting paravirtualized kernel on bare hardware
<6>[ 5.262252] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 5.262260] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 5.262589] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 5.262594] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 5.262595] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 5.262607] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro earlyprintk=xdbc1,keep usbcore.autosuspend=-1
<5>[ 5.262677] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 5.262691] random: crng init done
<6>[ 5.264537] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 5.265445] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 5.265501] Fallback order for Node 0: 0
<6>[ 5.265504] Built 1 zonelists, mobility grouping on. Total pages: 8285792
<6>[ 5.265504] Policy zone: Normal
<6>[ 5.265513] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[ 5.265514] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 5.265516] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 5.266470] software IO TLB: area num 8.
<4>[ 5.311606] **********************************************************
<4>[ 5.311608] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 5.311608] ** **
<4>[ 5.311608] ** This system shows unhashed kernel memory addresses **
<4>[ 5.311609] ** via the console, logs, and other interfaces. This **
<4>[ 5.311609] ** might reduce the security of your system. **
<4>[ 5.311609] ** **
<4>[ 5.311609] ** If you see this message and you are not debugging **
<4>[ 5.311609] ** the kernel, report this immediately to your system **
<4>[ 5.311610] ** administrator! **
<4>[ 5.311610] ** **
<4>[ 5.311610] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 5.311610] **********************************************************
<6>[ 5.312695] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 5.313014] ftrace: allocating 59518 entries in 233 pages
<6>[ 5.338631] ftrace: allocated 233 pages with 5 groups
<6>[ 5.339861] Dynamic Preempt: voluntary
<6>[ 5.340308] Running RCU self tests
<6>[ 5.340308] Running RCU synchronous self tests
<6>[ 5.340309] rcu: Preemptible hierarchical RCU implementation.
<6>[ 5.340309] rcu: RCU lockdep checking is enabled.
<6>[ 5.340310] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 5.340310] Trampoline variant of Tasks RCU enabled.
<6>[ 5.340311] Rude variant of Tasks RCU enabled.
<6>[ 5.340311] Tracing variant of Tasks RCU enabled.
<6>[ 5.340311] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 5.340312] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 5.340350] Running RCU synchronous self tests
<6>[ 5.340356] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 5.340359] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 5.340361] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 5.350593] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 5.351064] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 5.351410] Console: colour dummy device 80x25
<6>[ 5.351419] printk: legacy console [tty0] enabled
<6>[ 5.352610] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[ 5.352618] ... MAX_LOCKDEP_SUBCLASSES: 8
<6>[ 5.352621] ... MAX_LOCK_DEPTH: 48
<6>[ 5.352625] ... MAX_LOCKDEP_KEYS: 8192
<6>[ 5.352629] ... CLASSHASH_SIZE: 4096
<6>[ 5.352632] ... MAX_LOCKDEP_ENTRIES: 524288
<6>[ 5.352636] ... MAX_LOCKDEP_CHAINS: 524288
<6>[ 5.352640] ... CHAINHASH_SIZE: 262144
<6>[ 5.352644] memory used by lock dependency info: 54145 kB
<6>[ 5.352648] memory used for stack traces: 4224 kB
<6>[ 5.352652] per task-struct memory footprint: 1920 bytes
<6>[ 5.352701] ACPI: Core revision 20240827
<6>[ 5.353564] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 5.353628] APIC: Switch to symmetric I/O mode setup
<6>[ 5.353634] DMAR: Host address width 38
<6>[ 5.353638] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 5.353670] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 5.353699] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 5.353721] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 5.353746] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 5.353767] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[ 5.353801] DMAR: SATC flags: 0x1
<6>[ 5.353811] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 5.353817] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 5.353821] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 5.355883] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 5.360972] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 5.360991] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[ 5.361065] CPU0: Thermal monitoring enabled (TM1)
<6>[ 5.361072] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 5.361262] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 5.361267] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 5.361278] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 5.361286] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 5.361291] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 5.361298] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 5.361304] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 5.361319] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 5.361326] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 5.361332] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 5.361337] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 5.361344] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 5.361350] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 5.361356] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 5.361362] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 5.361367] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 5.361985] Freeing SMP alternatives memory: 48K
<6>[ 5.361985] pid_max: default: 32768 minimum: 301
<6>[ 5.361985] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 5.361985] landlock: Up and running.
<6>[ 5.361985] Yama: becoming mindful.
<6>[ 5.361985] AppArmor: AppArmor initialized
<6>[ 5.361985] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 5.361985] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 5.361985] Running RCU synchronous self tests
<6>[ 5.361985] Running RCU synchronous self tests
<6>[ 5.361985] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 5.361985] Running RCU Tasks wait API self tests
<6>[ 5.361985] Running RCU Tasks Rude wait API self tests
<6>[ 5.361985] Running RCU Tasks Trace wait API self tests
<6>[ 5.361985] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 5.361985] core: cpu_core PMU driver:
<6>[ 5.361985] ... version: 6
<6>[ 5.361985] ... bit width: 48
<6>[ 5.361985] ... generic registers: 10
<6>[ 5.361990] ... value mask: 0000ffffffffffff
<6>[ 5.361994] ... max period: 00007fffffffffff
<6>[ 5.361999] ... fixed-purpose events: 4
<6>[ 5.362002] ... event mask: 0001000f000003ff
<6>[ 5.362033] signal: max sigframe size: 3632
<6>[ 5.362055] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 5.362137] rcu: Hierarchical SRCU implementation.
<6>[ 5.362141] rcu: Max phase no-delay instances is 400.
<6>[ 5.363697] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 5.367993] Callback from call_rcu_tasks_trace() invoked.
<6>[ 5.369072] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 5.369334] smp: Bringing up secondary CPUs ...
<6>[ 5.369680] smpboot: x86: Booting SMP configuration:
<6>[ 5.369686] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
<6>[ 0.010735] core: cpu_atom PMU driver:
<6>[ 0.010735] ... version: 6
<6>[ 0.010735] ... bit width: 48
<6>[ 0.010735] ... generic registers: 8
<6>[ 0.010735] ... value mask: 0000ffffffffffff
<6>[ 0.010735] ... max period: 00007fffffffffff
<6>[ 0.010735] ... fixed-purpose events: 6
<6>[ 0.010735] ... event mask: 00000077000000ff
<6>[ 5.386121] smp: Brought up 1 node, 8 CPUs
<6>[ 5.386215] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 5.388220] Memory: 32344972K/33143168K available (24510K kernel code, 5579K rwdata, 9268K rodata, 5632K init, 68400K bss, 775236K reserved, 0K cma-reserved)
<6>[ 5.389431] devtmpfs: initialized
<6>[ 5.389431] x86/mm: Memory block size: 128MB
<6>[ 5.405400] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes)
<6>[ 5.406121] Running RCU synchronous self tests
<6>[ 5.406134] Running RCU synchronous self tests
<6>[ 5.406150] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 5.406150] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 5.406316] pinctrl core: initialized pinctrl subsystem
<6>[ 5.406986] PM: RTC time: 11:59:36, date: 2025-02-17
<6>[ 5.407789] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 5.408800] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 5.409192] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 5.409489] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 5.409560] audit: initializing netlink subsys (disabled)
<5>[ 5.409607] audit: type=2000 audit(1739793576.048:1): state=initialized audit_enabled=0 res=1
<6>[ 5.410565] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 5.410567] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 5.410575] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 5.410581] thermal_sys: Registered thermal governor 'user_space'
<6>[ 5.410587] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 5.410640] EISA bus registered
<6>[ 5.410679] cpuidle: using governor ladder
<6>[ 5.410679] cpuidle: using governor menu
<6>[ 5.411023] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 5.411477] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 5.411507] PCI: Using configuration type 1 for base access
<6>[ 5.411686] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 5.412235] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 5.412235] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 5.412235] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 5.412235] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 5.431986] raid6: avx2x4 gen() 76359 MB/s
<6>[ 5.448987] raid6: avx2x2 gen() 83172 MB/s
<6>[ 5.465987] raid6: avx2x1 gen() 77093 MB/s
<6>[ 5.465991] raid6: using algorithm avx2x2 gen() 83172 MB/s
<6>[ 5.482986] raid6: .... xor() 57673 MB/s, rmw enabled
<6>[ 5.482991] raid6: using avx2x2 recovery algorithm
<6>[ 5.485645] fbcon: Taking over console
<6>[ 5.485990] ACPI: Added _OSI(Module Device)
<6>[ 5.485990] ACPI: Added _OSI(Processor Device)
<6>[ 5.485990] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 5.485990] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 6.025577] ACPI: 31 ACPI AML tables successfully acquired and loaded
<6>[ 6.049819] ACPI: EC: EC started
<6>[ 6.049843] ACPI: EC: interrupt blocked
<6>[ 6.053693] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 6.053702] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 6.123241] Callback from call_rcu_tasks() invoked.
<6>[ 6.332470] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 6.332480] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 6.360206] ACPI: Interpreter enabled
<6>[ 6.360295] ACPI: PM: (supports S0 S4 S5)
<6>[ 6.360300] ACPI: Using IOAPIC for interrupt routing
<6>[ 6.365853] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 6.365860] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 6.384854] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 6.384904] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 6.471149] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 6.471999] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 6.480539] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 6.996889] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 7.010284] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 7.148149] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 7.149742] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 7.158272] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 7.184725] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 7.185449] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 7.186158] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 7.301114] ACPI: \: Can't tag data node
<3>[ 7.303048] ACPI: \: Can't tag data node
<3>[ 7.305325] ACPI: \: Can't tag data node
<3>[ 7.307048] ACPI: \: Can't tag data node
<3>[ 7.309289] ACPI: \: Can't tag data node
<6>[ 7.482592] ACPI: \_TZ_.FN00: New power resource
<6>[ 7.483097] ACPI: \_TZ_.FN01: New power resource
<6>[ 7.483586] ACPI: \_TZ_.FN02: New power resource
<6>[ 7.484079] ACPI: \_TZ_.FN03: New power resource
<6>[ 7.484564] ACPI: \_TZ_.FN04: New power resource
<6>[ 7.494933] ACPI: \PIN_: New power resource
<6>[ 7.505881] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 7.505922] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 7.514521] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC]
<6>[ 7.542580] PCI host bridge to bus 0000:00
<6>[ 7.542675] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 7.542698] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 7.542717] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 7.542738] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 7.542758] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 7.542783] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 7.553798] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 7.555227] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 7.555366] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 7.555389] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 7.555412] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 7.555502] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 7.558847] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 7.558918] pci 0000:00:04.0: BAR 0 [mem 0x3815c00000-0x3815c1ffff 64bit]
<6>[ 7.562391] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 7.562464] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 7.562484] pci 0000:00:05.0: BAR 4 [mem 0x3815c7b000-0x3815c7bfff 64bit]
<6>[ 7.565217] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 7.565300] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 7.565325] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 7.565362] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 7.565595] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 7.565690] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 7.577981] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 7.578054] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 7.578079] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 7.578115] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 7.578330] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 7.578410] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 7.590846] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 7.590933] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 7.590958] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 7.590994] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 7.591207] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 7.591289] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 7.603688] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 7.603768] pci 0000:00:0a.0: BAR 0 [mem 0x3815c50000-0x3815c5ffff 64bit]
<6>[ 7.603801] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 7.604286] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 7.604356] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 7.604377] pci 0000:00:0b.0: BAR 4 [mem 0x3815c7a000-0x3815c7afff 64bit]
<6>[ 7.605828] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 7.605930] pci 0000:00:0d.0: BAR 0 [mem 0x3815c40000-0x3815c4ffff 64bit]
<6>[ 7.606072] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 7.610698] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 7.610802] pci 0000:00:0d.2: BAR 0 [mem 0x3815bc0000-0x3815bfffff 64bit]
<6>[ 7.610822] pci 0000:00:0d.2: BAR 2 [mem 0x3815c79000-0x3815c79fff 64bit]
<6>[ 7.610947] pci 0000:00:0d.2: supports D1 D2
<6>[ 7.610958] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 7.614695] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 7.614801] pci 0000:00:0d.3: BAR 0 [mem 0x3815b80000-0x3815bbffff 64bit]
<6>[ 7.614821] pci 0000:00:0d.3: BAR 2 [mem 0x3815c78000-0x3815c78fff 64bit]
<6>[ 7.614945] pci 0000:00:0d.3: supports D1 D2
<6>[ 7.614956] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 7.618784] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 7.618891] pci 0000:00:12.0: BAR 0 [mem 0x3815c30000-0x3815c3ffff 64bit]
<6>[ 7.619027] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 7.626530] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 7.626702] pci 0000:00:13.0: BAR 0 [mem 0x3815c77000-0x3815c77fff 64bit]
<6>[ 7.626897] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 7.627964] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 7.628069] pci 0000:00:14.0: BAR 0 [mem 0x3815c20000-0x3815c2ffff 64bit]
<6>[ 7.628208] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 7.633961] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 7.634075] pci 0000:00:14.2: BAR 0 [mem 0x3815c68000-0x3815c6ffff 64bit]
<6>[ 7.634096] pci 0000:00:14.2: BAR 2 [mem 0x3815c76000-0x3815c76fff 64bit]
<6>[ 7.634831] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.635133] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 7.639136] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.639414] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 7.641985] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.641985] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 7.646898] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.647197] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 7.650966] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 7.651134] pci 0000:00:16.0: BAR 0 [mem 0x3815c71000-0x3815c71fff 64bit]
<6>[ 7.651325] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 7.658529] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint
<6>[ 7.658649] pci 0000:00:16.3: BAR 0 [io 0x4020-0x4027]
<6>[ 7.658665] pci 0000:00:16.3: BAR 1 [mem 0x94421000-0x94421fff]
<6>[ 7.659254] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[ 7.659324] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 7.659343] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 7.659362] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 7.659592] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 7.659679] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 7.673001] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 7.673001] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 7.673001] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 7.673614] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[ 7.673812] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[ 7.687489] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 7.692081] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 7.692315] pci 0000:00:1f.3: BAR 0 [mem 0x3815b00000-0x3815b7ffff 64bit]
<6>[ 7.692352] pci 0000:00:1f.3: BAR 4 [mem 0x3815800000-0x38159fffff 64bit]
<6>[ 7.692587] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 7.693675] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 7.693849] pci 0000:00:1f.4: BAR 0 [mem 0x3815c70000-0x3815c700ff 64bit]
<6>[ 7.693878] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 7.697655] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.697972] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 7.698446] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint
<6>[ 7.698558] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[ 7.698686] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 7.701976] pci 0000:00:1f.7: [8086:a824] type 00 class 0x130000 conventional PCI endpoint
<6>[ 7.702078] pci 0000:00:1f.7: BAR 0 [mem 0x3815a00000-0x3815afffff 64bit]
<6>[ 7.702098] pci 0000:00:1f.7: BAR 2 [mem 0x3815000000-0x38157fffff 64bit]
<6>[ 7.702117] pci 0000:00:1f.7: BAR 4 [mem 0x3815c60000-0x3815c67fff 64bit]
<6>[ 7.702917] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 7.703287] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 7.703646] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 7.705338] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[ 7.705635] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff]
<6>[ 7.705724] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[ 7.705813] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[ 7.706277] pci 0000:7f:00.0: supports D1 D2
<6>[ 7.706284] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 7.707376] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 7.709435] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 7.710505] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 7.710558] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 7.711397] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 7.711470] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 8.165862] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 18.143112] Low-power S0 idle used by default for system suspend
<6>[ 18.195619] ACPI: EC: interrupt unblocked
<6>[ 18.195630] ACPI: EC: event unblocked
<6>[ 18.195665] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 18.195671] ACPI: EC: GPE=0x6e
<6>[ 18.195677] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 18.195685] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 18.196193] iommu: Default domain type: Translated
<6>[ 18.196193] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 18.206542] SCSI subsystem initialized
<7>[ 18.207414] libata version 3.00 loaded.
<6>[ 18.207918] ACPI: bus type USB registered
<6>[ 18.208147] usbcore: registered new interface driver usbfs
<6>[ 18.208238] usbcore: registered new interface driver hub
<6>[ 18.208346] usbcore: registered new device driver usb
<6>[ 18.208663] pps_core: LinuxPPS API ver. 1 registered
<6>[ 18.208675] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 18.208726] PTP clock support registered
<6>[ 18.210036] EDAC MC: Ver: 3.0.0
<6>[ 18.212248] efivars: Registered efivars operations
<6>[ 18.215582] NetLabel: Initializing
<6>[ 18.215594] NetLabel: domain hash size = 128
<6>[ 18.215605] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 18.215790] NetLabel: unlabeled traffic allowed by default
<6>[ 18.215831] mctp: management component transport protocol core
<6>[ 18.215844] NET: Registered PF_MCTP protocol family
<6>[ 18.215932] PCI: Using ACPI for IRQ routing
<7>[ 18.277503] PCI: pci_cache_line_size set to 64 bytes
<6>[ 18.277920] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 18.278221] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 18.278242] e820: reserve RAM buffer [mem 0x68f42000-0x6bffffff]
<7>[ 18.278249] e820: reserve RAM buffer [mem 0x68f97000-0x6bffffff]
<7>[ 18.278256] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff]
<7>[ 18.278264] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 18.279061] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 18.279092] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 18.279108] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6>[ 18.279151] vgaarb: loaded
<6>[ 18.280770] clocksource: Switched to clocksource tsc-early
<5>[ 18.287886] VFS: Disk quotas dquot_6.6.0
<6>[ 18.287942] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 18.289989] AppArmor: AppArmor Filesystem Enabled
<6>[ 18.290358] pnp: PnP ACPI init
<6>[ 18.292395] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 18.292422] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 18.295991] system 00:02: [io 0x06a4] has been reserved
<6>[ 18.296015] system 00:02: [io 0x06a0] has been reserved
<6>[ 18.355220] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 18.355255] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 18.355281] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 18.355298] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 18.355315] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
<6>[ 18.355337] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 18.355355] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 18.355370] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 18.360071] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 18.364470] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 18.364728] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 18.372451] pnp: PnP ACPI: found 8 devices
<6>[ 18.387084] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 18.388321] NET: Registered PF_INET protocol family
<6>[ 18.388630] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 18.391837] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 18.392170] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 18.392507] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 18.393834] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 18.395939] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 18.396816] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 18.398462] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 18.400135] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 18.400250] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 18.400268] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 18.400283] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 18.400350] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 18.400360] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 18.400370] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]: assigned
<6>[ 18.400380] pci 0000:00:15.0: BAR 0 [mem 0x3815c72000-0x3815c72fff 64bit]: assigned
<6>[ 18.400435] pci 0000:00:15.1: BAR 0 [mem 0x3815c73000-0x3815c73fff 64bit]: assigned
<6>[ 18.400491] pci 0000:00:15.2: BAR 0 [mem 0x3815c74000-0x3815c74fff 64bit]: assigned
<6>[ 18.400545] pci 0000:00:15.3: BAR 0 [mem 0x3815c75000-0x3815c75fff 64bit]: assigned
<6>[ 18.400596] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 18.400645] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 18.400658] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
<6>[ 18.400670] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 18.400682] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 18.400697] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 18.400706] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]
<6>[ 18.400717] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 18.400729] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 18.400762] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 18.400771] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]
<6>[ 18.400783] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 18.400794] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 18.400817] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 18.400825] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 18.400836] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 18.400851] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 18.400887] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 18.400931] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 18.400939] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 18.400947] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 18.400956] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 18.400965] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 18.400975] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
<6>[ 18.400982] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 18.400990] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 18.401000] pci_bus 0000:2b: resource 0 [io 0x6000-0x6fff]
<6>[ 18.401008] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 18.401016] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 18.401026] pci_bus 0000:55: resource 0 [io 0x7000-0x7fff]
<6>[ 18.401033] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 18.401041] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 18.401051] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff]
<6>[ 18.401058] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[ 18.401067] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 18.402552] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 18.404763] PCI: CLS 0 bytes, default 64
<6>[ 18.404914] DMAR: No RMRR found
<6>[ 18.404930] DMAR: No ATSR found
<6>[ 18.404936] DMAR: dmar1: Using Queued invalidation
<6>[ 18.404965] DMAR: dmar0: Using Queued invalidation
<6>[ 18.404977] DMAR: dmar2: Using Queued invalidation
<6>[ 18.406131] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 18.406239] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 18.406332] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 18.406407] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 18.410809] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 18.412515] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 18.412609] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 18.412699] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 18.412805] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 18.412916] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 18.412978] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 18.413033] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 18.413121] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 18.413211] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 18.413314] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 18.413370] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 18.413492] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 18.413549] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 18.413609] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 18.413669] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 18.413776] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 18.413837] pci 0000:00:16.3: Adding to iommu group 14
<6>[ 18.413920] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 18.414033] pci 0000:00:1c.4: Adding to iommu group 16
<6>[ 18.414186] pci 0000:00:1f.0: Adding to iommu group 17
<6>[ 18.414246] pci 0000:00:1f.3: Adding to iommu group 17
<6>[ 18.414307] pci 0000:00:1f.4: Adding to iommu group 17
<6>[ 18.414371] pci 0000:00:1f.5: Adding to iommu group 17
<6>[ 18.414432] pci 0000:00:1f.6: Adding to iommu group 17
<6>[ 18.414497] pci 0000:00:1f.7: Adding to iommu group 17
<6>[ 18.414583] pci 0000:7f:00.0: Adding to iommu group 18
<6>[ 18.414690] pci 0000:80:00.0: Adding to iommu group 19
<6>[ 18.428705] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 18.428725] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 18.428733] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB)
<6>[ 18.437584] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 18.437855] clocksource: Switched to clocksource tsc
<6>[ 18.438404] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 18.443933] Initialise system trusted keyrings
<5>[ 18.444045] Key type blacklist registered
<6>[ 18.444534] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 18.454696] zbud: loaded
<6>[ 18.456140] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 18.456285] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 18.456293] ntfs3: Read-only LZX/Xpress compression included
<5>[ 18.456790] integrity: Platform Keyring initialized
<5>[ 18.456821] integrity: Machine keyring initialized
<6>[ 18.463276] xor: automatically using best checksumming function avx
<5>[ 18.463288] Key type asymmetric registered
<5>[ 18.463303] Asymmetric key parser 'x509' registered
<6>[ 18.463443] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 18.464017] io scheduler mq-deadline registered
<6>[ 18.465120] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 18.466897] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 18.467430] pcieport 0000:00:07.0: AER: enabled with IRQ 126
<6>[ 18.468718] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 18.469241] pcieport 0000:00:07.1: AER: enabled with IRQ 127
<6>[ 18.470471] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 18.470965] pcieport 0000:00:07.2: AER: enabled with IRQ 128
<6>[ 18.472071] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 18.472564] pcieport 0000:00:1c.0: AER: enabled with IRQ 129
<6>[ 18.474124] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[ 18.474673] pcieport 0000:00:1c.4: AER: enabled with IRQ 130
<6>[ 18.475281] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 18.478435] Monitor-Mwait will be used to enter C-1 state
<7>[ 18.478572] Monitor-Mwait will be used to enter C-2 state
<7>[ 18.478623] Monitor-Mwait will be used to enter C-3 state
<6>[ 18.486048] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 18.486252] ACPI: button: Lid Switch [LID0]
<6>[ 18.486497] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 18.486669] ACPI: button: Sleep Button [SLPB]
<6>[ 18.487040] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 18.487457] ACPI: button: Power Button [PWRB]
<4>[ 18.495911] ACPI Warning: \_SB.PR00._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 18.502880] ACPI Warning: \_SB.PR01._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 18.514476] ACPI Warning: \_SB.PR02._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 18.527672] ACPI Warning: \_SB.PR03._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 18.540054] ACPI Warning: \_SB.PR04._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 18.547754] ACPI Warning: \_SB.PR05._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 18.555128] ACPI Warning: \_SB.PR06._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 18.562347] ACPI Warning: \_SB.PR07._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<6>[ 18.669665] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 18.669688] ACPI: thermal: Thermal Zone [TZ00] (63 C)
<6>[ 18.672422] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 18.673565] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 18.676221] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 18.697875] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 18.733111] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[ 18.736047] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[ 18.761580] 0000:00:16.3: ttyS4 at I/O 0x4020 (irq = 19, base_baud = 115200) is a 16550A
<4>[ 18.768404] hpet_acpi_add: no address or irqs in _CRS
<6>[ 18.768684] Linux agpgart interface v0.103
<6>[ 18.769857] ACPI: bus type drm_connector registered
<6>[ 18.807634] loop: module loaded
<6>[ 18.890831] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 19.034857] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 19.244946] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 19.337142] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[ 19.560083] Key type psk registered
<6>[ 19.567129] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[ 19.568216] tun: Universal TUN/TAP device driver, 1.6
<6>[ 19.568600] nvme nvme0: pci function 0000:80:00.0
<6>[ 19.570038] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 19.570213] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 19.572842] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 19.575712] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 19.575757] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 19.575793] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 19.576558] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 19.576633] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 19.576654] usb usb1: Product: xHCI Host Controller
<6>[ 19.576668] usb usb1: Manufacturer: Linux 6.14.0-rc3-xe+ xhci-hcd
<6>[ 19.576684] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 19.581408] hub 1-0:1.0: USB hub found
<6>[ 19.581559] hub 1-0:1.0: 1 port detected
<6>[ 19.588026] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 19.588050] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 19.588067] usb usb2: Product: xHCI Host Controller
<6>[ 19.588080] usb usb2: Manufacturer: Linux 6.14.0-rc3-xe+ xhci-hcd
<6>[ 19.588094] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 19.590512] hub 2-0:1.0: USB hub found
<6>[ 19.590594] hub 2-0:1.0: 3 ports detected
<6>[ 19.612072] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 19.626113] nvme0n1: p1 p2
<6>[ 19.637326] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 19.637381] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 19.639673] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 19.642907] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 19.642942] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 19.642976] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 19.643322] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 19.643344] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 19.643361] usb usb3: Product: xHCI Host Controller
<6>[ 19.643373] usb usb3: Manufacturer: Linux 6.14.0-rc3-xe+ xhci-hcd
<6>[ 19.643388] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 19.645702] hub 3-0:1.0: USB hub found
<6>[ 19.645833] hub 3-0:1.0: 8 ports detected
<6>[ 19.699159] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 19.699188] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 19.699205] usb usb4: Product: xHCI Host Controller
<6>[ 19.699218] usb usb4: Manufacturer: Linux 6.14.0-rc3-xe+ xhci-hcd
<6>[ 19.699232] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 19.701337] hub 4-0:1.0: USB hub found
<6>[ 19.701413] hub 4-0:1.0: 2 ports detected
<6>[ 19.714550] usbcore: registered new interface driver usb-storage
<6>[ 19.714764] usbcore: registered new interface driver usbserial_generic
<6>[ 19.714898] usbserial: USB Serial support registered for generic
<6>[ 19.714985] usbcore: registered new interface driver ftdi_sio
<6>[ 19.715043] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 19.715127] usbcore: registered new interface driver pl2303
<6>[ 19.715182] usbserial: USB Serial support registered for pl2303
<6>[ 19.715382] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 19.715398] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[ 20.432164] i8042: Can't read CTR while initializing i8042
<3>[ 20.432188] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 20.434179] mousedev: PS/2 mouse device common for all mice
<6>[ 20.435499] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 20.436991] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 20.437175] rtc_cmos rtc_cmos: setting system clock to 2025-02-17T11:59:51 UTC (1739793591)
<6>[ 20.437288] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 20.437320] i2c_dev: i2c /dev entries driver
<6>[ 20.443675] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 20.443695] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 20.443709] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 20.443760] device-mapper: uevent: version 1.0.3
<6>[ 20.444719] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[ 20.444920] platform eisa.0: Probing EISA bus 0
<4>[ 20.444935] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 20.444955] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 20.444974] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 20.444993] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 20.445012] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 20.445027] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 20.445043] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 20.445060] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 20.445076] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 20.445088] platform eisa.0: EISA: Detected 0 cards
<6>[ 20.445099] intel_pstate: Intel P-state driver initializing
<6>[ 20.451329] Hybrid CPU capacity scaling enabled
<6>[ 20.453471] intel_pstate: HWP enabled
<6>[ 20.453481] sdhci: Secure Digital Host Controller Interface driver
<6>[ 20.453493] sdhci: Copyright(c) Pierre Ossman
<6>[ 20.453662] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 20.456595] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[ 20.457416] drop_monitor: Initializing network drop monitor service
<6>[ 20.457629] NET: Registered PF_INET6 protocol family
<6>[ 20.460898] Segment Routing with IPv6
<6>[ 20.460944] In-situ OAM (IOAM) with IPv6
<6>[ 20.460995] NET: Registered PF_PACKET protocol family
<5>[ 20.461237] Key type dns_resolver registered
<4>[ 20.464854] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 20.465343] microcode: Current revision: 0x0000011b
<6>[ 20.466177] IPI shorthand broadcast: enabled
<6>[ 20.476006] sched_clock: Marking stable (20466001670, 9735775)->(20560754855, -85017410)
<6>[ 20.476811] registered taskstats version 1
<5>[ 20.478327] Loading compiled-in X.509 certificates
<6>[ 20.506274] Demotion targets for Node 0: null
<6>[ 20.506604] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<4>[ 20.506612] ------------[ cut here ]------------
<4>[ 20.506616] Debug warning: early ioremap leak of 1 areas detected.
please boot with early_ioremap_debug and report the dmesg.
<4>[ 20.506631] WARNING: CPU: 3 PID: 1 at mm/early_ioremap.c:90 check_early_ioremap_leak+0x51/0x80
<6>[ 20.506632] kmemleak: Automatic memory scanning thread started
<4>[ 20.506649] Modules linked in:
<4>[ 20.506653] CPU: 3 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc3-xe+ #1
<4>[ 20.506660] Hardware name: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D97.2411281331 11/28/2024
<4>[ 20.506668] RIP: 0010:check_early_ioremap_leak+0x51/0x80
<4>[ 20.506673] Code: 48 83 c3 01 48 83 fb 08 75 e1 85 c0 75 0e 48 8b 5d f8 c9 31 f6 31 ff c3 cc cc cc cc 89 c6 48 c7 c7 a8 01 eb 82 e8 1f c4 b6 fd <0f> 0b b8 01 00 00 00 48 8b 5d f8 c9 31 f6 31 ff c3 cc cc cc cc 48
<4>[ 20.506685] RSP: 0000:ffffc900000f7dc0 EFLAGS: 00010246
<4>[ 20.506690] RAX: 0000000000000000 RBX: 0000000000000008 RCX: 0000000000000000
<4>[ 20.506695] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
<4>[ 20.506700] RBP: ffffc900000f7dd0 R08: 0000000000000000 R09: 0000000000000000
<4>[ 20.506705] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
<4>[ 20.506710] R13: ffffffff83ad1490 R14: ffffc900000f7de0 R15: 000000000003828c
<4>[ 20.506715] FS: 0000000000000000(0000) GS:ffff88885f380000(0000) knlGS:0000000000000000
<4>[ 20.506721] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 20.506725] CR2: 0000000000000000 CR3: 0000000003248001 CR4: 0000000000f70ef0
<4>[ 20.506730] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
<4>[ 20.506735] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
<4>[ 20.506746] PKRU: 55555554
<4>[ 20.506749] Call Trace:
<4>[ 20.506752] <TASK>
<4>[ 20.506755] ? show_regs+0x6c/0x80
<4>[ 20.506761] ? __warn+0x93/0x1c0
<4>[ 20.506766] ? check_early_ioremap_leak+0x51/0x80
<4>[ 20.506770] ? report_bug+0x182/0x1b0
<4>[ 20.506777] ? handle_bug+0x6e/0xb0
<4>[ 20.506781] ? exc_invalid_op+0x18/0x80
<4>[ 20.506786] ? asm_exc_invalid_op+0x1b/0x20
<4>[ 20.506793] ? check_early_ioremap_leak+0x51/0x80
<4>[ 20.506797] ? __pfx_check_early_ioremap_leak+0x10/0x10
<4>[ 20.506802] ? __pfx_check_early_ioremap_leak+0x10/0x10
<4>[ 20.506806] do_one_initcall+0x76/0x400
<4>[ 20.506812] kernel_init_freeable+0x3da/0x6a0
<4>[ 20.506819] ? __pfx_kernel_init+0x10/0x10
<4>[ 20.506825] kernel_init+0x1b/0x200
<4>[ 20.506829] ret_from_fork+0x44/0x70
<4>[ 20.506834] ? __pfx_kernel_init+0x10/0x10
<4>[ 20.506839] ret_from_fork_asm+0x1a/0x30
<4>[ 20.506846] </TASK>
<4>[ 20.506848] irq event stamp: 83260619
<4>[ 20.506852] hardirqs last enabled at (83260627): [<ffffffff814a4d49>] __up_console_sem+0x79/0xa0
<4>[ 20.506860] hardirqs last disabled at (83260634): [<ffffffff814a4d2e>] __up_console_sem+0x5e/0xa0
<4>[ 20.506867] softirqs last enabled at (83260444): [<ffffffff813d3fbf>] __irq_exit_rcu+0x13f/0x160
<4>[ 20.506874] softirqs last disabled at (83260435): [<ffffffff813d3fbf>] __irq_exit_rcu+0x13f/0x160
<4>[ 20.506881] ---[ end trace 0000000000000000 ]---
<5>[ 20.507079] Key type .fscrypt registered
<5>[ 20.507083] Key type fscrypt-provisioning registered
<6>[ 20.509656] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 20.512297] Key type encrypted registered
<6>[ 20.512308] AppArmor: AppArmor sha256 policy hashing enabled
<6>[ 20.512398] ima: No TPM chip found, activating TPM-bypass!
<5>[ 20.512414] Loading compiled-in module X.509 certificates
<5>[ 20.513192] Loaded X.509 cert 'Build time autogenerated kernel key: 80e90f4382cf7157ce112862e39c9bf6f1f02ffe'
<6>[ 20.513202] ima: Allocated hash algorithm: sha256
<6>[ 20.513247] ima: No architecture policies found
<6>[ 20.513334] evm: Initialising EVM extended attributes:
<6>[ 20.513338] evm: security.selinux
<6>[ 20.513341] evm: security.SMACK64
<6>[ 20.513344] evm: security.SMACK64EXEC
<6>[ 20.513347] evm: security.SMACK64TRANSMUTE
<6>[ 20.513350] evm: security.SMACK64MMAP
<6>[ 20.513353] evm: security.apparmor
<6>[ 20.513356] evm: security.ima
<6>[ 20.513358] evm: security.capability
<6>[ 20.513361] evm: HMAC attrs: 0x1
<6>[ 20.515566] PM: Magic number: 13:859:984
<6>[ 20.515626] platform PNP0C14:01: hash matches
<6>[ 20.515651] acpi PNP0C14:01: hash matches
<6>[ 20.515677] acpi STK0003:06: hash matches
<6>[ 20.515803] printk: legacy console [netcon0] enabled
<6>[ 20.515809] netconsole: network logging started
<6>[ 20.516540] RAS: Correctable Errors collector initialized.
<6>[ 20.516681] clk: Disabling unused clocks
<6>[ 20.516691] PM: genpd: Disabling unused power domains
<6>[ 20.517319] md: Waiting for all devices to be available before autodetect
<6>[ 20.517326] md: If you don't use raid, use raid=noautodetect
<6>[ 20.517334] md: Autodetecting RAID arrays.
<6>[ 20.517346] md: autorun ...
<6>[ 20.517350] md: ... autorun DONE.
<6>[ 20.560027] EXT4-fs (nvme0n1p2): mounted filesystem e14561b2-a821-43fb-816a-3be81f76b65f ro with ordered data mode. Quota mode: none.
<6>[ 20.560101] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 20.560608] devtmpfs: mounted
<6>[ 20.572005] Freeing unused decrypted memory: 2028K
<6>[ 20.572912] Freeing unused kernel image (initmem) memory: 5632K
<6>[ 20.572936] Write protecting the kernel read-only data: 34816k
<6>[ 20.573445] Freeing unused kernel image (text/rodata gap) memory: 64K
<6>[ 20.573892] Freeing unused kernel image (rodata/data gap) memory: 972K
<6>[ 20.578251] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 20.578276] Run /sbin/init as init process
<7>[ 20.578280] with arguments:
<7>[ 20.578282] /sbin/init
<7>[ 20.578282] with environment:
<7>[ 20.578283] HOME=/
<7>[ 20.578284] TERM=linux
<7>[ 20.578284] BOOT_IMAGE=/boot/drm_intel
<7>[ 20.627209] systemd[1]: Inserted module 'autofs4'
<7>[ 20.646582] systemd[1]: systemd 255.4-1ubuntu8.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 20.646627] systemd[1]: Detected architecture x86-64.
<7>[ 20.647710] systemd[1]: Hostname set to <shard-lnl-5>.
<7>[ 20.838845] systemd[1]: Configuration file /run/systemd/system/systemd-networkd-wait-online.service.d/10-netplan.conf is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 20.839400] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 20.907081] systemd[1]: Queued start job for default target graphical.target.
<7>[ 20.947172] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 20.949311] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 20.950599] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 20.950838] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 20.951438] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 20.951547] systemd[1]: Expecting device dev-disk-by\x2duuid-BBA4\x2d5DAC.device - /dev/disk/by-uuid/BBA4-5DAC...
<7>[ 20.951626] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 20.951704] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 20.951777] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 20.951841] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 20.951908] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 20.952154] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 20.953090] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 20.953372] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 20.953670] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 20.953924] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 20.954117] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 20.954386] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 20.954679] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 20.954949] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 20.955118] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 20.955389] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 20.955635] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 20.976919] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 20.981348] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 20.984786] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 20.987574] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 20.992423] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 20.995276] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 20.998641] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 21.003245] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 21.006643] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 21.010214] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 21.013180] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 21.017447] systemd-journald[211]: Collecting audit messages is disabled.
<7>[ 21.017834] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 21.023324] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 21.028116] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 21.033096] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 21.033774] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<6>[ 21.035695] pstore: Using crash dump compression: deflate
<6>[ 21.037377] pstore: Registered efi_pstore as persistent store backend
<7>[ 21.039043] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<7>[ 21.046345] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 21.046522] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 21.046586] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 21.050913] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<6>[ 21.054176] fuse: init (API version 7.42)
<7>[ 21.057121] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 21.203996] EXT4-fs (nvme0n1p2): re-mounted e14561b2-a821-43fb-816a-3be81f76b65f r/w. Quota mode: none.
<6>[ 21.232183] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:411435008k SS
<7>[ 21.243398] systemd-journald[211]: Received client request to flush runtime journal.
<7>[ 21.262514] systemd-journald[211]: /var/log/journal/50de536483fd4db8b6bcf2f985230a3b/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 21.262532] systemd-journald[211]: Rotating system journal.
<4>[ 21.934030] nvme nvme0: using unchecked data buffer
<6>[ 22.064290] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<6>[ 22.125882] pci 0000:00:05.0: Setting to D3hot
<6>[ 22.131563] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<6>[ 22.137806] pci 0000:00:0b.0: Setting to D3hot
<6>[ 22.139467] intel-hid INTC107B:00: platform supports 5 button array
<4>[ 22.149868] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 22.150052] intel_pmc_core INT33A1:00: initialized
<6>[ 22.157015] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<5>[ 22.263512] audit: type=1400 audit(1739793593.323:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=433 comm="apparmor_parser"
<5>[ 22.263951] audit: type=1400 audit(1739793593.325:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=432 comm="apparmor_parser"
<5>[ 22.264249] audit: type=1400 audit(1739793593.325:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=429 comm="apparmor_parser"
<5>[ 22.264802] audit: type=1400 audit(1739793593.325:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=430 comm="apparmor_parser"
<5>[ 22.266419] audit: type=1400 audit(1739793593.327:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=435 comm="apparmor_parser"
<5>[ 22.266829] audit: type=1400 audit(1739793593.328:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=436 comm="apparmor_parser"
<5>[ 22.270721] audit: type=1400 audit(1739793593.331:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=437 comm="apparmor_parser"
<5>[ 22.272025] audit: type=1400 audit(1739793593.333:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=439 comm="apparmor_parser"
<5>[ 22.272752] audit: type=1400 audit(1739793593.333:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=438 comm="apparmor_parser"
<5>[ 22.274446] audit: type=1400 audit(1739793593.335:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=441 comm="apparmor_parser"
<3>[ 22.300170] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<3>[ 22.432293] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<6>[ 22.525193] ACPI: bus type thunderbolt registered
<6>[ 22.565714] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 22.578699] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 22.579961] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 22.600777] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[ 22.600785] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[ 22.610407] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 22.628170] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 22.637902] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[ 22.656333] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 22.656337] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 22.656418] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 22.658226] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 22.675929] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 22.690392] intel_rapl_common: Found RAPL domain package
<6>[ 22.690403] intel_rapl_common: Found RAPL domain dram
<6>[ 22.739514] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c8:f7:85, XID 541, IRQ 175
<6>[ 22.739525] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[ 22.743252] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 22.840646] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 22.860597] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
<6>[ 22.860602] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 22.860604] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 22.860605] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 22.860606] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
<6>[ 22.860606] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 22.884197] cryptd: max_cpu_qlen set to 1000
<6>[ 22.955136] AES CTR mode by8 optimization enabled
<6>[ 23.152023] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<4>[ 23.208606] block nvme0n1: No UUID available providing old NGUID
<6>[ 23.232976] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:35:90
<6>[ 23.232981] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[ 23.233485] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[ 23.273800] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[ 23.302684] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[ 23.302689] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[ 23.302691] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<6>[ 23.555574] evm: overlay not supported
<6>[ 23.710179] intel_rapl_common: Found RAPL domain package
<6>[ 23.710185] intel_rapl_common: Found RAPL domain core
<6>[ 23.710187] intel_rapl_common: Found RAPL domain uncore
<6>[ 23.710189] intel_rapl_common: Found RAPL domain dram
<6>[ 23.710191] intel_rapl_common: Found RAPL domain psys
<6>[ 23.762518] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<6>[ 23.801043] loop0: detected capacity change from 0 to 8
<4>[ 23.841407] spi-nor spi0.0: supply vcc not found, using dummy regulator
<6>[ 23.859969] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<5>[ 23.886855] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 23.886880] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 23.951866] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[ 24.118172] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[ 24.293394] hid: raw HID events driver (C) Jiri Kosina
<6>[ 24.299972] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 24.338774] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 24.340356] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 24.341793] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 24.342581] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 24.344491] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 24.345094] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 24.348902] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 24.351362] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 24.354329] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 24.356735] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 24.359278] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 24.360924] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 25.117811] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 25.117866] typec port0: bound usb2-port1 (ops connector_ops)
<6>[ 26.113206] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 26.113249] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 27.713813] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<7>[ 35.042309] systemd-journald[211]: /var/log/journal/50de536483fd4db8b6bcf2f985230a3b/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 50.630094] [IGT] xe_module_load: executing
<7>[ 50.644550] [IGT] xe_module_load: starting subtest load
<6>[ 50.825917] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 50.827503] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[ 50.827513] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG / Xe2_HPG / Xe3_LPG (20.04) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 50.827624] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 50.827723] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 50.835037] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 50.838963] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 50.839069] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 50.839155] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 50.839238] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 50.839317] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 50.839392] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 50.839464] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 50.839533] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 50.839600] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 50.839666] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 50.839730] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 50.839841] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 50.839911] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 50.839980] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 50.840050] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 50.840177] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 50.841117] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 50.841200] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 50.850803] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 50.851768] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 50.851893] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 50.852038] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,0000007f
<7>[ 50.852145] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,0000007f
<7>[ 50.852247] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 50.852346] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 50.852441] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 50.853174] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 50.857088] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 50.857175] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 50.857242] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 50.857307] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 50.857370] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 50.857431] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 50.857489] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 50.857546] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 50.857601] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 50.857656] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 50.857709] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 50.857779] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 50.857832] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 50.857884] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 50.859042] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 50.861312] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1263
<6>[ 50.862349] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 50.862441] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 50.862546] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 50.863988] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 50.864223] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 50.884069] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 50.884526] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 50.884710] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 50.884933] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 50.885105] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 50.885276] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 50.885446] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 50.885610] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 50.886342] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 50.886697] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[ 50.887045] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7>[ 50.887377] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 50.887672] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 50.887930] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 50.888217] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 50.888449] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 50.888703] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 50.888984] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 50.889226] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 50.889457] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 50.889676] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 50.889919] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 50.890138] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 50.890349] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 50.890542] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 50.890730] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 50.890933] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.891105] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.891275] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 50.891440] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.891594] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.891750] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.891920] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 50.892081] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.892225] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.892367] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.892503] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 50.892662] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.892831] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.892960] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.893080] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 50.893200] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.893320] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.893444] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.893567] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 50.893686] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.893821] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.893932] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.894049] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 50.895035] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 50.895211] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 50.895359] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 50.895493] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 50.895618] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 50.895771] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 50.895901] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 50.896016] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 50.896128] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 50.896249] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 50.896379] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 50.896494] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 50.896605] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 50.896716] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 50.897148] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 50.897282] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 50.897411] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 50.897534] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 50.897656] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 50.897807] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 50.897931] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 50.898071] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 50.898214] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 50.898337] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 50.898460] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 50.898580] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 50.898699] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 50.898854] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 50.899065] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 50.899346] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 50.899575] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 50.899886] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 50.900160] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 50.900405] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 50.900645] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 50.900876] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 50.901117] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 50.901329] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=mem
<7>[ 50.901373] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 50.901667] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 50.901904] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 50.902125] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 50.902962] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 50.903318] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 50.906546] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 50.907280] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 50.907517] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 50.907730] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 50.907965] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 50.908147] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 50.908160] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 50.908352] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7>[ 50.908358] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 9 (9.0 usec)
<7>[ 50.908539] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 50.908542] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 103 (103.0 usec)
<7>[ 50.908714] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 50.908722] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 103 (103.0 usec)
<7>[ 50.908905] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 50.908965] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 103 (103.0 usec)
<7>[ 50.909070] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 50.909155] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 96 (96.0 usec)
<7>[ 50.909234] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 50.909314] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 103 (103.0 usec)
<7>[ 50.909396] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 50.909549] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 50.909696] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7>[ 50.909860] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 50.910008] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 50.910150] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 50.910291] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 50.910426] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 50.910553] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 50.910671] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 50.910799] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7>[ 50.910920] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 50.911040] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 50.911148] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 50.911254] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 50.911360] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 50.911461] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 50.911558] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 50.911655] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<7>[ 50.917310] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[ 50.921861] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 50.922163] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 50.922439] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<6>[ 50.922607] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7>[ 50.922734] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:191:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 50.923172] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:191:DDI A/PHY A]
<7>[ 50.923587] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 50.923950] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 50.924216] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 50.924505] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 50.924844] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 50.925136] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 50.925407] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 50.925673] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 50.925963] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 50.926283] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:191:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 50.926639] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 50.926977] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 50.927244] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 50.927500] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 50.927756] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 50.928085] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 50.928430] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 50.929817] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:191:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 50.930120] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:191:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[ 50.932787] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 50.933479] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 50.934631] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e
<7>[ 50.936463] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 50.937224] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 50.939795] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 50.951064] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:192:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 50.951089] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 50.951093] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.951096] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:192:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 50.951102] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.951105] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:192:eDP-1] ELD monitor
<5>[ 50.951116] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.951119] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:192:eDP-1] ELD size 20, SAD count 0
<5>[ 50.951124] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 50.951352] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 50.951355] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 50.951358] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.951374] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:192:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 50.952122] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:192:eDP-1] Performing OUI wait (0 ms)
<7>[ 50.952766] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:192:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 50.952876] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:192:eDP-1] DRRS type: none
<7>[ 50.953023] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:192:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 50.953154] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:192:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 50.953329] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 50.953430] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 50.953524] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 50.953611] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 50.953694] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 50.953818] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 50.954112] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:200:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 50.954332] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 50.954479] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:200:DDI TC1/PHY TC1]
<7>[ 50.954952] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:212:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 50.955090] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 50.955216] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:212:DDI TC2/PHY TC2]
<7>[ 50.955497] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:220:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 50.955628] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 50.955763] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:220:DDI TC3/PHY TC3]
<7>[ 50.956305] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 50.956452] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:135:pipe B] hw state readout: disabled
<7>[ 50.956584] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:188:pipe C] hw state readout: disabled
<7>[ 50.956673] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 50.956769] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 50.956856] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 50.956941] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 50.957024] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 50.957108] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 50.957191] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:85:plane 1B] hw state readout: disabled, pipe B
<7>[ 50.957274] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 2B] hw state readout: disabled, pipe B
<7>[ 50.957357] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:103:plane 3B] hw state readout: disabled, pipe B
<7>[ 50.957440] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:112:plane 4B] hw state readout: disabled, pipe B
<7>[ 50.957521] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:121:plane 5B] hw state readout: disabled, pipe B
<7>[ 50.957603] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:cursor B] hw state readout: disabled, pipe B
<7>[ 50.957683] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:138:plane 1C] hw state readout: disabled, pipe C
<7>[ 50.957778] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 2C] hw state readout: disabled, pipe C
<7>[ 50.957860] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:156:plane 3C] hw state readout: disabled, pipe C
<7>[ 50.957940] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:165:plane 4C] hw state readout: disabled, pipe C
<7>[ 50.958021] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:174:plane 5C] hw state readout: disabled, pipe C
<7>[ 50.958102] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:cursor C] hw state readout: disabled, pipe C
<7>[ 50.958899] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 50.959027] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:191:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 50.959134] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 50.959233] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 50.959323] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:202:DP-MST A] hw state readout: disabled, pipe A
<7>[ 50.959407] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:203:DP-MST B] hw state readout: disabled, pipe B
<7>[ 50.959487] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:204:DP-MST C] hw state readout: disabled, pipe C
<7>[ 50.959569] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 50.959656] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 50.959738] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:214:DP-MST A] hw state readout: disabled, pipe A
<7>[ 50.959823] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:215:DP-MST B] hw state readout: disabled, pipe B
<7>[ 50.959901] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:216:DP-MST C] hw state readout: disabled, pipe C
<7>[ 50.959983] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 50.960069] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 50.960152] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:222:DP-MST A] hw state readout: disabled, pipe A
<7>[ 50.960230] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:223:DP-MST B] hw state readout: disabled, pipe B
<7>[ 50.960308] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:224:DP-MST C] hw state readout: disabled, pipe C
<7>[ 50.960419] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:192:eDP-1] hw state readout: enabled
<7>[ 50.960506] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:201:DP-1] hw state readout: disabled
<7>[ 50.960588] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:213:DP-2] hw state readout: disabled
<7>[ 50.960670] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:221:DP-3] hw state readout: disabled
<7>[ 50.960946] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[ 50.961042] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 50.961124] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 50.961203] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 50.961280] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 50.961356] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 50.961433] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 50.961550] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:85:plane 1B] min_cdclk 0 kHz
<7>[ 50.961634] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 2B] min_cdclk 0 kHz
<7>[ 50.961713] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:103:plane 3B] min_cdclk 0 kHz
<7>[ 50.961802] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:112:plane 4B] min_cdclk 0 kHz
<7>[ 50.961883] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:121:plane 5B] min_cdclk 0 kHz
<7>[ 50.961961] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:cursor B] min_cdclk 0 kHz
<7>[ 50.962039] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7>[ 50.962156] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:138:plane 1C] min_cdclk 0 kHz
<7>[ 50.962250] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 2C] min_cdclk 0 kHz
<7>[ 50.962334] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:156:plane 3C] min_cdclk 0 kHz
<7>[ 50.962414] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:165:plane 4C] min_cdclk 0 kHz
<7>[ 50.962492] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:174:plane 5C] min_cdclk 0 kHz
<7>[ 50.962569] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:cursor C] min_cdclk 0 kHz
<7>[ 50.962646] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7>[ 50.962809] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[ 50.962926] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A
<7>[ 50.963159] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 50.963272] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 50.963379] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 50.963484] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 50.963586] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 50.963688] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 50.963795] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 50.963897] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 50.963998] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 50.964096] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 50.964193] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 50.964290] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 50.964382] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 50.964473] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 50.964565] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 50.964656] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0
<7>[ 50.964754] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96
<7>[ 50.964848] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906
<7>[ 50.964938] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 50.965029] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 50.965118] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 50.965208] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 50.965299] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 50.965389] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 50.965477] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 50.965567] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 50.965656] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 50.965752] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 50.965843] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 50.965933] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 50.966022] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 50.966109] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 50.966198] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.966287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.966376] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.966464] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 50.966552] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 50.966640] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.966727] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.966820] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.966908] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 50.966996] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength : 0
<7>[ 50.967083] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness tap size : 0
<7>[ 50.967170] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:135:pipe B] enable: no [setup_hw_state]
<7>[ 50.967258] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:188:pipe C] enable: no [setup_hw_state]
<7>[ 50.967495] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 50.967596] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:135:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 50.967692] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:188:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 50.968133] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 50.968233] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[ 50.984950] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<7>[ 51.057133] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<6>[ 51.205364] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 51.205368] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 51.205369] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 51.205446] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[ 51.205538] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 51.205619] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 51.205691] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 51.205805] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[ 51.205888] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[ 51.205980] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[ 51.206046] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 51.206111] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 51.206172] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 51.207134] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 51.207199] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 51.207266] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 51.207329] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 51.207389] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 51.207451] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 51.207512] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 51.207577] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 51.207640] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 51.207702] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 51.207775] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 51.207836] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 51.207896] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 51.207967] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 51.208039] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 51.208106] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 51.208165] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 51.208224] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 51.208281] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 51.208334] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 51.208386] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 51.208438] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 51.208493] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 51.208547] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 51.208601] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 51.208655] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 51.208716] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 51.208785] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 51.208846] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[ 51.208912] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[ 51.208978] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[ 51.209046] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 51.209115] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 51.209177] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 51.209232] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 51.209287] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 51.209349] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 51.209410] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 51.209657] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 51.209720] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 51.209790] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 51.210077] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 51.210141] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 51.210194] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 51.210367] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 51.210415] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7>[ 51.210462] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 51.210510] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[ 51.210556] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[ 51.210601] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[ 51.210960] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 51.211040] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[ 51.211113] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[ 51.211173] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 51.211229] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 51.211283] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 51.211337] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 51.211388] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 51.211442] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 51.211491] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 51.211539] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 51.211586] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 51.211632] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 51.211678] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 51.211749] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 51.211971] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 51.214176] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[ 51.227330] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[ 51.228141] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 51.228232] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 51.237977] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 51.238345] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 51.239128] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 51.239212] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 51.239292] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[ 51.239365] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 51.239441] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ca18000
<7>[ 51.239511] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 51.239578] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 51.239641] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 51.239706] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 51.242132] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 51.242214] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7>[ 51.242287] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 51.244832] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 51.248165] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 51.248168] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 51.248169] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 51.248170] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 51.248171] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 51.248172] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 51.248173] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 51.248174] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 51.248175] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 51.248176] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 51.248202] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[ 51.248331] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[ 51.248457] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[ 51.249209] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 51.249315] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 51.249420] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 51.249522] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 51.249623] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 51.249728] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 51.249890] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 51.250016] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 51.250124] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 51.250223] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 51.250318] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 51.250412] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 51.250503] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 51.250593] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 51.250681] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 51.250788] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 51.250878] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 51.250966] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 51.251052] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 51.251137] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 51.251222] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 51.251306] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 51.251390] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 51.251476] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 51.251565] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 51.251653] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 51.251767] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 51.252754] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 51.252869] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 51.253271] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 51.253393] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 51.254007] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 51.254130] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 51.254244] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[ 51.254353] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 51.254457] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 51.254556] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 51.254651] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 51.254754] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 51.254842] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 51.254927] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 51.255009] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 51.255092] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 51.255174] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 51.255252] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 51.255355] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 51.255487] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 51.272097] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[ 51.273222] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 51.273366] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 51.293207] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 51.293674] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 51.295201] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 51.297945] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 51.301009] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 51.344312] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 51.346473] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 51.347049] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 51.347474] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0
<7>[ 51.347832] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 51.348159] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 51.348597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 51.349001] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.349370] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.349726] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 51.351585] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 51.352077] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 51.352412] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 51.357711] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 51.368426] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:192:eDP-1] adding connector to sysfs
<7>[ 51.374348] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:192:eDP-1] backlight device intel_backlight registered
<7>[ 51.375236] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 51.378507] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:192:eDP-1] generating connector hotplug event
<7>[ 51.378605] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:201:DP-1] adding connector to sysfs
<7>[ 51.379101] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 51.379851] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:201:DP-1] generating connector hotplug event
<7>[ 51.379887] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:213:DP-2] adding connector to sysfs
<7>[ 51.380233] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 51.380712] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:213:DP-2] generating connector hotplug event
<7>[ 51.380818] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:221:DP-3] adding connector to sysfs
<7>[ 51.381133] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 51.381650] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:221:DP-3] generating connector hotplug event
<6>[ 51.381673] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 51.381693] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 51.389144] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 51.391531] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 51.392567] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 51.392675] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 51.393756] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:201:DP-1]
<7>[ 51.393912] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 51.394061] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:201:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 51.394150] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:213:DP-2]
<7>[ 51.394257] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 51.394348] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:213:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 51.394430] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:221:DP-3]
<7>[ 51.394534] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 51.394621] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:221:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 51.394699] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 51.394814] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[ 51.394924] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:135:pipe B] not active, skipping
<7>[ 51.395026] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:188:pipe C] not active, skipping
<7>[ 51.395126] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[ 51.395298] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 51.395493] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:192:eDP-1]
<7>[ 51.395506] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:192:eDP-1]
<7>[ 51.396287] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 51.396798] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 51.396918] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 51.397032] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 51.397194] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:192:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 51.397199] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.397200] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.397201] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:192:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 51.397203] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.397205] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:192:eDP-1] ELD monitor
<5>[ 51.397208] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.397209] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:192:eDP-1] ELD size 20, SAD count 0
<5>[ 51.397211] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.397229] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:192:eDP-1] VRR capable: yes
<7>[ 51.397338] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:192:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 51.398004] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 51.398120] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:192:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 51.399179] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:192:eDP-1] status updated from unknown to connected
<5>[ 51.399384] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.399386] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.399387] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.399417] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:192:eDP-1] probed modes:
<7>[ 51.399429] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.399439] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:201:DP-1]
<7>[ 51.399448] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:201:DP-1]
<7>[ 51.399612] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:201:DP-1] disconnected
<7>[ 51.399623] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:213:DP-2]
<7>[ 51.399630] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:213:DP-2]
<7>[ 51.399779] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:213:DP-2] disconnected
<7>[ 51.399789] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:221:DP-3]
<7>[ 51.399797] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:221:DP-3]
<7>[ 51.399932] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:221:DP-3] disconnected
<7>[ 51.399941] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:192:eDP-1] enabled? yes
<7>[ 51.399945] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:201:DP-1] enabled? no
<7>[ 51.399947] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:213:DP-2] enabled? no
<7>[ 51.399950] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:221:DP-3] enabled? no
<7>[ 51.400025] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 51.400038] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:192:eDP-1] looking for cmdline mode
<7>[ 51.400041] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:192:eDP-1] looking for preferred mode, tile 0
<7>[ 51.400044] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:192:eDP-1] Found mode 2880x1800
<7>[ 51.400046] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 51.400059] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 51.400088] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 51.400134] xe 0000:00:02.0: [drm:intelfb_create [xe]] no BIOS fb, allocating a new one
<7>[ 51.401998] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 51.407215] xe 0000:00:02.0: [drm:intelfb_create [xe]] allocated 2880x1800 fb: 0x01d8f000
<6>[ 51.407973] fbcon: xedrmfb (fb0) is primary device
<7>[ 51.408735] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:192:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 51.408901] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:191:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 51.409025] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 51.409155] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 51.409276] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:191:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 51.409397] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 51.409512] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 51.409611] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 51.409714] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 51.409851] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 51.409978] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 51.410095] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 51.410195] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 51.410280] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 51.410365] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 51.410450] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 51.410533] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 51.410613] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 51.410692] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 51.410797] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 51.410893] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 51.410986] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 51.411077] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 51.411155] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 51.411247] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 51.411338] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 51.411425] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 51.411508] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 51.411579] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 51.411656] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 51.411735] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 51.411894] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 51.412013] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 51.412127] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 3, 1 -> 2, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 51.412216] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 25, 25, 25, 25, 25, 25, 0, 0, 7, 73, 7 -> 49, 289, 289, 289, 265, 289, 0, 0, 63, 73, 87
<7>[ 51.412294] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 319, 319, 319, 293, 319, 0, 0, 64, 82, 88
<7>[ 51.412363] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.412432] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.412508] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.412573] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.412637] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.412700] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.412770] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.412851] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.412940] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.413031] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.413108] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.413184] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.413249] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.413313] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.413372] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.413433] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.413496] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.413558] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.413620] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.413680] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.413748] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[ 51.413857] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 51.413966] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 51.414069] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.414151] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.414231] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 51.414325] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 51.414436] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 51.414542] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 51.414638] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 51.414723] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 51.414833] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 51.414934] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 51.415031] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 51.415122] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 51.415195] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 51.415266] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 51.415335] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 51.415401] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 51.415467] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 51.415535] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 51.415602] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 51.415667] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 51.415733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 51.415827] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 51.415911] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 51.415996] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 51.416075] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 51.416140] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[ 51.416205] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 2859, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7>[ 51.416273] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 2753, vmin vtotal: 1906, vmax vtotal: 2859
<7>[ 51.416341] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.416408] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.416477] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.416548] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.416618] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.416687] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 51.416759] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 51.416838] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 51.416917] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 51.416995] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 51.417069] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 51.417128] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 51.417187] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 51.417247] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.417305] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.417368] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.417432] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.417494] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.417555] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.417615] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.417675] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.417734] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.417813] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.417888] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength : 0
<7>[ 51.417964] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness tap size : 0
<7>[ 51.418039] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:193] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 51.418105] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 51.418168] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 51.418229] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 51.418290] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 51.418352] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 51.418413] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 51.418473] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[ 51.429508] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<6>[ 51.449218] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 51.449588] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[ 51.472651] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 51.632978] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:192:eDP-1] set backlight PWM = 0
<7>[ 51.634222] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 51.644641] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:191:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 51.644734] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 51.645023] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:191:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 51.645074] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:191:DDI A/PHY A] - short
<7>[ 51.645338] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:191:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 51.697500] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 51.697896] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:191:DDI A/PHY A] - short
<7>[ 51.727969] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 51.728438] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:191:DDI A/PHY A]
<7>[ 51.728455] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 51.729208] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:191:DDI A/PHY A]
<7>[ 51.729225] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 51.729567] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:191:DDI A/PHY A]
<7>[ 51.729957] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DDI TC1/PHY TC1]
<7>[ 51.730280] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:202:DP-MST A]
<7>[ 51.730547] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:203:DP-MST B]
<7>[ 51.730824] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:204:DP-MST C]
<7>[ 51.731116] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DDI TC2/PHY TC2]
<7>[ 51.731369] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:214:DP-MST A]
<7>[ 51.731614] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:215:DP-MST B]
<7>[ 51.731881] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:216:DP-MST C]
<7>[ 51.732160] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DDI TC3/PHY TC3]
<7>[ 51.732396] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:222:DP-MST A]
<7>[ 51.732629] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:223:DP-MST B]
<7>[ 51.732891] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:224:DP-MST C]
<7>[ 51.733170] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 51.733486] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 51.733816] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:191:DDI A/PHY A] - long
<7>[ 51.734128] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 51.734583] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:191:DDI A/PHY A]
<7>[ 51.734793] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:191:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 51.735158] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:191:DDI A/PHY A] PPS 0 wait for panel power cycle (494 ms remaining)
<7>[ 51.876647] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 52.233016] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:191:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7>[ 52.233554] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 52.234076] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:191:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 52.234506] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:191:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 52.270619] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 52.271067] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:191:DDI A/PHY A] - long
<7>[ 52.271508] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 52.272012] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:191:DDI A/PHY A]
<7>[ 52.433810] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.433860] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.434002] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.563211] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 52.565933] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:191:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 52.566268] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:191:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 52.569538] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 52.570838] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:192:eDP-1][ENCODER:191:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 52.571999] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:192:eDP-1][ENCODER:191:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 52.573173] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:192:eDP-1][ENCODER:191:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 52.574318] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:192:eDP-1][ENCODER:191:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 52.575665] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:192:eDP-1][ENCODER:191:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 52.576028] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:192:eDP-1][ENCODER:191:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 52.577780] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:192:eDP-1][ENCODER:191:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 52.578101] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:192:eDP-1][ENCODER:191:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 52.578841] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 52.579326] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 52.579665] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 52.580128] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:192:eDP-1] set backlight PWM = 192000
<6>[ 52.581946] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 52.581966] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 52.582252] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 52.596151] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 52.598813] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:192:eDP-1]
<7>[ 52.599248] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[ 52.600769] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 52.603580] Console: switching to colour frame buffer device 180x56
<6>[ 52.618454] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 52.638828] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 52.639266] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 52.639660] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 52.640063] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 52.640417] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 52.640778] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 52.641107] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 52.641426] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 52.641822] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 52.642143] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 52.642450] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 52.642757] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 52.643085] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 52.643356] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 52.643612] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 52.643883] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 52.644153] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 52.644395] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 52.644630] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 52.644887] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 52.645112] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 52.645329] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 52.645728] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 52.645617] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 52.645788] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 52.645983] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 52.646396] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:192:eDP-1]
<7>[ 52.646313] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 52.646429] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:192:eDP-1]
<7>[ 52.646638] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[ 52.646915] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 52.647266] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 52.647647] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 52.647886] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 52.649125] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[ 52.649146] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 52.650796] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 52.651235] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 52.651625] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 52.652432] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:192:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 52.652450] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.652456] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.652461] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:192:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 52.652469] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.652475] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:192:eDP-1] ELD monitor
<5>[ 52.652491] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.652496] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:192:eDP-1] ELD size 20, SAD count 0
<5>[ 52.652504] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.652556] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:192:eDP-1] VRR capable: yes
<7>[ 52.652965] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:192:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 52.654542] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 52.654915] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:192:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 52.655163] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<5>[ 52.656868] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.656879] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.656884] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.656993] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:192:eDP-1] probed modes:
<7>[ 52.657422] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 52.657456] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:201:DP-1]
<7>[ 52.657486] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:201:DP-1]
<7>[ 52.658955] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.659403] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:201:DP-1] disconnected
<7>[ 52.659438] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:213:DP-2]
<7>[ 52.659467] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:213:DP-2]
<7>[ 52.659905] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.660212] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:213:DP-2] disconnected
<7>[ 52.660244] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:221:DP-3]
<7>[ 52.660271] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:221:DP-3]
<7>[ 52.660657] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.661010] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:221:DP-3] disconnected
<7>[ 52.661043] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:192:eDP-1] enabled? yes
<7>[ 52.661058] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:201:DP-1] enabled? no
<7>[ 52.661067] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:213:DP-2] enabled? no
<7>[ 52.661077] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:221:DP-3] enabled? no
<7>[ 52.661456] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 52.661502] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:192:eDP-1] looking for cmdline mode
<7>[ 52.661513] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:192:eDP-1] looking for preferred mode, tile 0
<7>[ 52.661522] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:192:eDP-1] Found mode 2880x1800
<7>[ 52.661530] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 52.661598] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 52.665667] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 52.666105] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[ 52.679875] xe 0000:00:02.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<6>[ 52.704560] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[ 52.708932] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7>[ 52.709978] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[ 52.710561] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 52.730732] xe 0000:00:02.0: [drm:drm_client_dev_restore] intel-fbdev: ret=0
<7>[ 52.730948] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 52.731049] [IGT] xe_module_load: exiting, ret=0
<7>[ 52.754654] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 52.754790] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 52.754886] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 52.754975] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 52.755060] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 52.755145] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 52.755230] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 52.755313] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 52.755395] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 52.755476] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 52.755558] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 52.755639] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 52.755720] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 52.755828] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 52.755914] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 52.755995] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 52.756075] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 52.756157] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 52.756238] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 52.756318] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 52.756399] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 52.756480] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 52.756561] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 52.756641] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 52.756722] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 52.756809] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 52.756892] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 52.756972] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 52.757053] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 52.757133] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 52.757214] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 52.757293] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 52.757374] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 52.757454] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 52.757536] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 52.757618] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<6>[ 52.763178] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[ 52.767392] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<7>[ 52.768777] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 52.768919] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 52.769015] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<6>[ 52.771557] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 52.772100] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 52.779106] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[ 52.779227] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:192:eDP-1] set backlight level = 13892
<7>[ 53.713382] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 53.713365] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 53.713368] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 53.809688] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 55.186312] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:191:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 55.186706] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:191:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067