igt@xe_module_load@load on bat-adlp-7@xe-5069-955e6bde1057d27c39cd2181c5a6b23a7ff2e415 Test details

Detail	Value
Duration	5.38 seconds
Igt-Version	IGT-Version: 2.4-g65d691069 (x86_64) (Linux: 7.1.0-rc3-lgci-xe-xe-5069-955e6bde1057d27c3-debug+ x86_64)
Out	Using IGT_SRANDOM=1778875707 for randomisation Starting subtest: load Opened device: /dev/dri/card0 Subtest load: SUCCESS (5.376s)
Err	Starting subtest: load Subtest load: SUCCESS (5.376s)
Dmesg	<6> [127.926306] [IGT] xe_module_load: executing <4> [127.926364] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <6> [128.025809] [IGT] xe_module_load: starting subtest load <5> [128.407163] Setting dangerous option force_probe - tainting kernel <6> [128.413087] xe 0000:00:02.0: vgaarb: deactivate vga console <6> [128.415132] xe 0000:00:02.0: [drm] Running in SR-IOV PF mode <7> [128.415135] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error <6> [128.415468] xe 0000:00:02.0: [drm] Found alderlake_p (device ID 46a3) integrated display version 13.00 stepping D0 <7> [128.415476] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] ALDERLAKE_P 46a3:000c dgfx:0 gfx:Xe_LP (12.00) media:Xe_M (12.00) display:yes dma_m_s:39 tc:1 gscfi:0 cscfi:0 <7> [128.415598] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:C0, M:C0, B:*) <7> [128.415702] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF) <5> [128.415827] xe 0000:00:02.0: [drm] PF: migration missing prerequisite: requires memory-based IRQ support <7> [128.417516] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 62914560 bytes <7> [128.417666] xe 0000:00:02.0: [drm:intel_pch_type [xe]] Found Alder Lake PCH <7> [128.417797] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [128.417938] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x449ff018 <7> [128.418088] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 2.1.0 <7> [128.418192] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7> [128.418289] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7> [128.418382] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7> [128.418496] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7> [128.418729] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: DDR4 <7> [128.418871] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 2 <7> [128.418998] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7> [128.419104] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 3 <7> [128.419306] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2134 tRP=15 tRDPRE=8 tRAS=35 tRCD=15 tRC=50 <7> [128.419470] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=2934 tRP=21 tRDPRE=12 tRAS=47 tRCD=21 tRC=68 <7> [128.419618] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=3201 tRP=22 tRDPRE=12 tRAS=52 tRCD=22 tRC=74 <7> [128.419758] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=2668 tRP=19 tRDPRE=10 tRAS=43 tRCD=19 tRC=62 <7> [128.419893] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] PSF GV 0: CLK=32 <7> [128.420017] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] PSF GV 1: CLK=48 <7> [128.420130] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] PSF GV 2: CLK=48 <7> [128.420236] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=9299 peakbw: 34144 <7> [128.420341] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=10925 peakbw: 46944 <7> [128.420443] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=11707 peakbw: 51216 <7> [128.420556] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=10508 peakbw: 42688 <7> [128.420664] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / PSF GV 0: num_planes=0 bw=34133 <7> [128.420768] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / PSF GV 1: num_planes=0 bw=51200 <7> [128.420870] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / PSF GV 2: num_planes=0 bw=51200 <7> [128.420985] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=2 deratedbw=11064 peakbw: 34144 <7> [128.421097] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=2 deratedbw=13813 peakbw: 46944 <7> [128.421202] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=2 deratedbw=14899 peakbw: 51216 <7> [128.421306] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=2 deratedbw=13010 peakbw: 42688 <7> [128.421408] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / PSF GV 0: num_planes=2 bw=34133 <7> [128.421511] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / PSF GV 1: num_planes=2 bw=51200 <7> [128.421618] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / PSF GV 2: num_planes=2 bw=51200 <7> [128.421721] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=12225 peakbw: 34144 <7> [128.421823] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=15917 peakbw: 46944 <7> [128.421923] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=17252 peakbw: 51216 <7> [128.422083] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=14768 peakbw: 42688 <7> [128.422184] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / PSF GV 0: num_planes=0 bw=34133 <7> [128.422295] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / PSF GV 1: num_planes=0 bw=51200 <7> [128.422401] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / PSF GV 2: num_planes=0 bw=51200 <7> [128.422504] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=12902 peakbw: 34144 <7> [128.422609] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=17230 peakbw: 46944 <7> [128.422717] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=18731 peakbw: 51216 <7> [128.422916] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=15838 peakbw: 42688 <7> [128.423036] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / PSF GV 0: num_planes=0 bw=34133 <7> [128.423141] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / PSF GV 1: num_planes=0 bw=51200 <7> [128.423241] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / PSF GV 2: num_planes=0 bw=51200 <7> [128.423352] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=13269 peakbw: 34144 <7> [128.423458] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=17970 peakbw: 46944 <7> [128.423560] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=19569 peakbw: 51216 <7> [128.423661] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=16433 peakbw: 42688 <7> [128.423760] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / PSF GV 0: num_planes=0 bw=34133 <7> [128.423860] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / PSF GV 1: num_planes=0 bw=51200 <7> [128.423981] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / PSF GV 2: num_planes=0 bw=51200 <7> [128.424091] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=13460 peakbw: 34144 <7> [128.424192] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=18365 peakbw: 46944 <7> [128.424299] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=20017 peakbw: 51216 <7> [128.424405] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=16748 peakbw: 42688 <7> [128.424508] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / PSF GV 0: num_planes=0 bw=34133 <7> [128.424609] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / PSF GV 1: num_planes=0 bw=51200 <7> [128.424709] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / PSF GV 2: num_planes=0 bw=51200 <7> [128.424853] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 19200 kHz <7> [128.425344] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7> [128.425484] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT ALDERLAKE-P ", BDB version 251 <7> [128.425608] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7> [128.425734] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 395, min size 5) <7> [128.425855] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7> [128.425985] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7> [128.426097] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 850) <7> [128.426205] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7> [128.426308] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7> [128.426422] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7> [128.426541] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366) <7> [128.426652] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7> [128.426762] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 78, min size 136) <7> [128.426868] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7> [128.426985] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7> [128.427086] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [128.427186] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7> [128.427286] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7> [128.427393] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2 <7> [128.427500] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [128.427612] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [128.427720] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [128.427832] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [128.427949] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7> [128.428060] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [128.428166] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT HDMI level shift: 0 <7> [128.428268] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [128.428452] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port B VBT HDMI level shift: 0 <7> [128.428556] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [128.428662] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT HDMI level shift: 0 <7> [128.428850] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [128.429015] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT HDMI level shift: 0 <7> [128.429142] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [128.429246] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT HDMI level shift: 0 <7> [128.429353] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [128.429461] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port G VBT HDMI level shift: 0 <7> [128.429570] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a <7> [128.429739] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [128.430029] xe 0000:00:02.0: [drm:check_phy_reg [xe]] Combo PHY A reg 001628a0 state mismatch: current 90033bbc mask e0000000 expected a0000000 <7> [128.430203] xe 0000:00:02.0: [drm:icl_combo_phys_init [xe]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [128.430468] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7> [128.430604] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [128.430735] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [128.430938] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [128.431052] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [128.431162] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [128.431368] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [128.431481] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [128.431681] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [128.431834] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [128.432177] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [128.432690] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/adlp_dmc.bin <7> [128.433500] xe 0000:00:02.0: [drm:intel_bw_init [xe]] Forcing SAGV disable: mask 0x10b <7> [128.433837] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7> [128.434041] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 35 us <7> [128.434366] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7> [128.434493] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 51 (51.0 usec) <7> [128.434597] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 80 (80.0 usec) <7> [128.434699] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 99 (99.0 usec) <7> [128.434795] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 144 (144.0 usec) <7> [128.434890] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 144 (144.0 usec) <7> [128.435004] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 3 (3.0 usec) <7> [128.435104] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 54 (54.0 usec) <7> [128.435199] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 83 (83.0 usec) <7> [128.435290] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 102 (102.0 usec) <7> [128.435379] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 147 (147.0 usec) <7> [128.435465] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 147 (147.0 usec) <7> [128.439382] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7> [128.439594] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7> [128.439782] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [128.439966] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP) <7> [128.440125] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL) <7> [128.440285] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x512050d4 (EVT_HTP) <7> [128.440449] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x8f03c = 0xc003b300 (EVT_CTL) <7> [128.440607] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x8f00c = 0x584c57fc (EVT_HTP) <7> [128.440747] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 4 display pipes available. <7> [128.440802] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7> [128.440981] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0 <7> [128.441143] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling) <7> [128.441302] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x214c2114 (EVT_HTP) <7> [128.441467] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling) <7> [128.441624] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x22402208 (EVT_HTP) <7> [128.441771] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling) <7> [128.441909] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x241422fc (EVT_HTP) <7> [128.442042] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[7]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7> [128.442156] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[8]: 0x5f010 = 0x26f826cc (EVT_HTP) <7> [128.442274] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7> [128.442399] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0 <7> [128.442503] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling) <7> [128.442646] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa968a930 (EVT_HTP) <7> [128.442788] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling) <7> [128.442902] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xaa5caa24 (EVT_HTP) <7> [128.443050] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling) <7> [128.443179] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xac30ab18 (EVT_HTP) <7> [128.443294] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[7]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7> [128.443400] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[8]: 0x5f410 = 0xaf14aee8 (EVT_HTP) <7> [128.443524] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7> [128.443642] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0 <7> [128.443793] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling) <7> [128.444383] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP) <7> [128.444538] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7> [128.444708] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f810 = 0x280427d8 (EVT_HTP) <7> [128.444880] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 4: <7> [128.445101] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0 <7> [128.445222] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling) <7> [128.445343] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP) <7> [128.445483] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5fc40 = 0xc0033100 (EVT_CTL) (disabling) <7> [128.445629] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5fc10 = 0x980497d8 (EVT_HTP) <6> [128.447114] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/adlp_dmc.bin (v2.20) <7> [128.450036] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [128.450210] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7> [128.450349] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7> [128.450493] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:507:DDI A/PHY A] Using AUX CH A (VBT) <7> [128.450649] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:507:DDI A/PHY A] <7> [128.450836] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7> [128.450996] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7> [128.451127] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7> [128.451253] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [128.451371] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7> [128.451481] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [128.451588] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7> [128.451696] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7> [128.451808] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [128.452113] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:507:DDI A/PHY A] initial power sequencer: PPS 0 <7> [128.452333] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [128.452444] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [128.452546] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [128.452644] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [128.452740] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [128.452979] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [128.453248] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [128.453420] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:507:DDI A/PHY A] PPS 0 turning VDD on <7> [128.453628] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:507:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7> [128.478945] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 44 41 00 00 01 c0 02 00 02 00 00 0b 80 <7> [128.491949] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [128.517943] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 04 92 a5 00 00 <7> [128.553944] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7> [128.565945] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7> [128.625947] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [128.973980] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [128.973994] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [128.973998] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor <7> [128.974003] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0 <7> [128.974091] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:508:eDP-1] using preferred EDID fixed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa <7> [128.974243] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:508:eDP-1] using alternate EDID fixed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa <7> [128.985973] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:508:eDP-1] Performing OUI wait (0 ms) <7> [128.997945] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:508:eDP-1] Detected Intel HDR backlight interface version 1 <7> [128.998064] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:508:eDP-1] Using Intel proprietary eDP backlight controls <7> [128.998171] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:508:eDP-1] DRRS type: seamless <7> [128.998298] xe 0000:00:02.0: [drm:intel_dp_aux_hdr_setup_backlight [xe]] [CONNECTOR:508:eDP-1] SDR backlight is controlled through PWM <7> [128.998457] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:508:eDP-1] Using native PCH PWM for backlight control (controller=0) <7> [129.009950] xe 0000:00:02.0: [drm:intel_dp_aux_hdr_setup_backlight [xe]] [CONNECTOR:508:eDP-1] Using AUX HDR interface for backlight control (range 0..552) <7> [129.021978] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:508:eDP-1] backlight initialized, enabled, brightness 552/552 <7> [129.022173] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [129.022287] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [129.022391] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [129.022490] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [129.022582] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [129.022798] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [129.023097] xe 0000:00:02.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:516:DDI B/PHY B] <7> [129.023220] xe 0000:00:02.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:516:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7> [129.023621] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:525:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7> [129.023834] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7> [129.024138] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:525:DDI TC1/PHY TC1] <7> [129.024529] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:535:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7> [129.024689] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: legacy (ready: yes, owned: yes, HPD: legacy) <7> [129.024802] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_USBC2 <7> [129.025144] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:535:DDI TC2/PHY TC2] <7> [129.025651] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:544:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7> [129.025850] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7> [129.026043] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:544:DDI TC3/PHY TC3] <7> [129.026367] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:553:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT) <7> [129.026529] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7> [129.026687] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:553:DDI TC4/PHY TC4] <7> [129.027148] xe 0000:00:02.0: [drm:intel_vga_disable [xe]] VGA plane is disabled <6> [129.027263] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io:owns=io+mem <7> [129.027605] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] hw state readout: enabled <7> [129.027728] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:269:pipe B] hw state readout: disabled <7> [129.027841] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled <7> [129.027962] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:505:pipe D] hw state readout: disabled <7> [129.028062] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] hw state readout: enabled, pipe A <7> [129.028159] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] hw state readout: disabled, pipe A <7> [129.028256] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] hw state readout: disabled, pipe A <7> [129.028351] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] hw state readout: disabled, pipe A <7> [129.028454] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] hw state readout: disabled, pipe A <7> [129.028553] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] hw state readout: disabled, pipe A <7> [129.028648] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:153:plane 1B] hw state readout: disabled, pipe B <7> [129.028740] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:plane 2B] hw state readout: disabled, pipe B <7> [129.028832] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:213:plane 3B] hw state readout: disabled, pipe B <7> [129.028923] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:243:plane 4B] hw state readout: disabled, pipe B <7> [129.029037] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:253:plane 5B] hw state readout: disabled, pipe B <7> [129.029138] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:263:cursor B] hw state readout: disabled, pipe B <7> [129.029234] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C <7> [129.029327] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C <7> [129.029418] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C <7> [129.029508] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C <7> [129.029602] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C <7> [129.029700] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C <7> [129.029795] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:389:plane 1D] hw state readout: disabled, pipe D <7> [129.029894] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:419:plane 2D] hw state readout: disabled, pipe D <7> [129.030116] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:449:plane 3D] hw state readout: disabled, pipe D <7> [129.030221] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:479:plane 4D] hw state readout: disabled, pipe D <7> [129.030316] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:489:plane 5D] hw state readout: disabled, pipe D <7> [129.030416] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:499:cursor D] hw state readout: disabled, pipe D <7> [129.030523] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7> [129.030683] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:507:DDI A/PHY A] hw state readout: enabled, pipe A <7> [129.030803] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:516:DDI B/PHY B] hw state readout: disabled, pipe A <7> [129.030921] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [129.031148] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:525:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7> [129.031254] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:527:DP-MST A] hw state readout: disabled, pipe A <7> [129.031355] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST B] hw state readout: disabled, pipe B <7> [129.031452] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:529:DP-MST C] hw state readout: disabled, pipe C <7> [129.031548] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:530:DP-MST D] hw state readout: disabled, pipe D <7> [129.031645] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: PHY left in legacy mode on disabled port, disconnecting it <7> [129.031757] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_USBC2 <7> [129.031894] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [129.032009] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:535:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7> [129.032114] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:537:DP-MST A] hw state readout: disabled, pipe A <7> [129.032213] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:538:DP-MST B] hw state readout: disabled, pipe B <7> [129.032309] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:539:DP-MST C] hw state readout: disabled, pipe C <7> [129.032410] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:540:DP-MST D] hw state readout: disabled, pipe D <7> [129.032512] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [129.032617] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7> [129.032714] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:546:DP-MST A] hw state readout: disabled, pipe A <7> [129.032806] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:547:DP-MST B] hw state readout: disabled, pipe B <7> [129.032902] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:548:DP-MST C] hw state readout: disabled, pipe C <7> [129.033010] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:549:DP-MST D] hw state readout: disabled, pipe D <7> [129.033104] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port G/TC#4: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [129.033207] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:553:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7> [129.033303] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:555:DP-MST A] hw state readout: disabled, pipe A <7> [129.033396] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:556:DP-MST B] hw state readout: disabled, pipe B <7> [129.033487] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:557:DP-MST C] hw state readout: disabled, pipe C <7> [129.033577] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:558:DP-MST D] hw state readout: disabled, pipe D <7> [129.033676] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0 <7> [129.033795] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7> [129.033908] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [129.034027] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 0 <7> [129.034133] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [129.034236] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [129.034343] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [129.034453] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [129.034574] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:508:eDP-1] hw state readout: enabled <7> [129.034691] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:517:HDMI-A-1] hw state readout: disabled <7> [129.034799] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:526:DP-1] hw state readout: disabled <7> [129.034903] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:536:DP-2] hw state readout: disabled <7> [129.035117] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:545:DP-3] hw state readout: disabled <7> [129.035238] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:554:DP-4] hw state readout: disabled <7> [129.035451] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] min_cdclk 269300 kHz <7> [129.035554] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] min_cdclk 0 kHz <7> [129.035651] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] min_cdclk 0 kHz <7> [129.035745] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] min_cdclk 0 kHz <7> [129.035838] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] min_cdclk 0 kHz <7> [129.035936] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] min_cdclk 0 kHz <7> [129.036030] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] min_cdclk 269300 kHz <7> [129.036131] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:153:plane 1B] min_cdclk 0 kHz <7> [129.036227] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:plane 2B] min_cdclk 0 kHz <7> [129.036319] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:213:plane 3B] min_cdclk 0 kHz <7> [129.036409] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:243:plane 4B] min_cdclk 0 kHz <7> [129.036498] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:253:plane 5B] min_cdclk 0 kHz <7> [129.036590] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:263:cursor B] min_cdclk 0 kHz <7> [129.036686] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:269:pipe B] min_cdclk 0 kHz <7> [129.036778] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz <7> [129.036867] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz <7> [129.036979] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz <7> [129.037068] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz <7> [129.037156] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz <7> [129.037248] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz <7> [129.037344] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz <7> [129.037437] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:389:plane 1D] min_cdclk 0 kHz <7> [129.037527] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:419:plane 2D] min_cdclk 0 kHz <7> [129.037621] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:449:plane 3D] min_cdclk 0 kHz <7> [129.037716] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:479:plane 4D] min_cdclk 0 kHz <7> [129.037810] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:489:plane 5D] min_cdclk 0 kHz <7> [129.037899] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:499:cursor D] min_cdclk 0 kHz <7> [129.037996] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:505:pipe D] min_cdclk 0 kHz <7> [129.038117] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:151:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7> [129.038224] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:269:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7> [129.038323] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7> [129.038418] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:505:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7> [129.038512] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 2154400 num active planes 1 <7> [129.038646] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7> [129.038769] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7> [129.038885] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0 <7> [129.039010] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DDI_IO_A <7> [129.039165] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: n/a, Transcoder A secondary: yes, Transcoder B secondary: no <7> [129.039400] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [setup_hw_state] <7> [129.039523] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [129.039647] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [129.039761] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [129.039870] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [129.039987] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [129.040092] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [129.040196] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 7843931, data_n: 8388608, link_m: 653660, link_n: 524288, tu: 64 <7> [129.040303] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [129.040411] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7> [129.040522] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [129.040630] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [129.040735] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7> [129.040838] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [129.040947] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [129.041049] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [129.041162] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [129.041273] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [129.041380] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [129.041485] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa <7> [129.041588] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa <7> [129.041698] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2160-2244 vs=2163-2168 vt=2244, flags=0xa <7> [129.041808] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa <7> [129.041914] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2160-2244 vs=2163-2168 vt=2244, flags=0xa <7> [129.042029] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 538600, min cdclk 269300, min voltage level 0 <7> [129.042132] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 60, ips linetime: 0 <7> [129.042233] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [129.042334] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 3840x2160+0+0 <7> [129.042434] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [129.042533] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [129.042632] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [129.042731] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: cfgcr0: 0x1c2, cfgcr1: 0x84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [129.042837] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7> [129.042953] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [129.043059] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [129.043163] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [129.043264] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [129.043365] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [129.043466] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [129.043566] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [129.043665] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [129.043773] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [129.043880] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [129.043995] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [129.044098] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: no [setup_hw_state] <7> [129.044200] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state] <7> [129.044307] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:505:pipe D] enable: no [setup_hw_state] <7> [129.044583] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:151:pipe A][PLANE:35:plane 1A] with fb: size=3840x2160@32, offset=0, pitch 15360, size 0x1fa4000 <6> [129.044703] xe 0000:00:02.0: [drm] Initial FB size exceeds half of stolen, discarding <7> [129.044705] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:35:plane 1A] on [CRTC:151:pipe A] <6> [129.065473] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from i915/adlp_guc_70.bin version 70.49.4 <7> [129.069324] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004551cf <7> [129.069471] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7> [129.069570] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7> [129.069660] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [129.069745] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cac <7> [129.069827] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x46a3000c <7> [129.069907] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [129.070004] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [129.070089] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [129.070173] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [129.070258] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [129.070346] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [129.070433] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [129.070518] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <6> [129.073304] xe 0000:00:02.0: [drm] Tile0: GT0: Using HuC firmware from i915/tgl_huc.bin version 7.9.3 <7> [129.073580] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [129.073730] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] Calculated GuC WOPCM [592K, 1420K) <7> [129.095368] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 20ms, freq = 1150MHz (req = 1200MHz), before = 1150MHz, status = 0x8002F0EC <7> [129.096080] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [129.096415] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,00000007 <7> [129.096544] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,00000000 <7> [129.096658] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 0000ffff <7> [129.096766] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd8 <7> [129.096869] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000bb <6> [129.201767] xe 0000:00:02.0: [drm] Tile0: GT0: vcs0 fused off <6> [129.201770] xe 0000:00:02.0: [drm] Tile0: GT0: vcs1 fused off <6> [129.201771] xe 0000:00:02.0: [drm] Tile0: GT0: vcs3 fused off <6> [129.201772] xe 0000:00:02.0: [drm] Tile0: GT0: vcs4 fused off <6> [129.201773] xe 0000:00:02.0: [drm] Tile0: GT0: vcs5 fused off <6> [129.201773] xe 0000:00:02.0: [drm] Tile0: GT0: vcs6 fused off <6> [129.201774] xe 0000:00:02.0: [drm] Tile0: GT0: vcs7 fused off <6> [129.201775] xe 0000:00:02.0: [drm] Tile0: GT0: vecs1 fused off <6> [129.201776] xe 0000:00:02.0: [drm] Tile0: GT0: vecs2 fused off <6> [129.201777] xe 0000:00:02.0: [drm] Tile0: GT0: vecs3 fused off <7> [129.201958] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7> [129.202086] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x2340-0x234f]: allow read access <7> [129.202208] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x7010-0x7013]: allow rw access <7> [129.202314] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x7018-0x701b]: allow rw access <7> [129.202409] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [129.202499] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb0f]: allow read access <7> [129.202586] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [129.202726] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7> [129.202815] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x223a8-0x223ab]: allow read access <7> [129.202963] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add vcs2 whitelist to engine <7> [129.203055] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x1d03a8-0x1d03ab]: allow read access <7> [129.203209] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add vecs0 whitelist to engine <7> [129.203294] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x1c83a8-0x1c83ab]: allow read access <7> [129.204610] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7> [129.204708] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x9424] = 0xfffffffc <7> [129.204824] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x9550] = 0x000003ff <7> [129.204936] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1d3f10] = 0x00400000 <7> [129.205032] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x3 <7> [129.205131] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 64 <7> [129.205227] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0x37 <7> [129.205320] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x37 <7> [129.205411] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x37 <7> [129.205505] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x5 <7> [129.205597] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x5 <7> [129.205684] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x37 <7> [129.205769] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x17 <7> [129.205853] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x17 <7> [129.205944] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x27 <7> [129.206042] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x27 <7> [129.206127] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x77 <7> [129.206216] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x77 <7> [129.206299] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x57 <7> [129.206382] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x57 <7> [129.206464] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x67 <7> [129.206546] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x67 <7> [129.206633] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[16] 0x4040 0x37 <7> [129.206719] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[17] 0x4044 0x37 <7> [129.206806] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[18] 0x4048 0x60037 <7> [129.206895] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[19] 0x404c 0x737 <7> [129.206993] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[20] 0x4050 0x337 <7> [129.207077] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[21] 0x4054 0x137 <7> [129.207161] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[22] 0x4058 0x3b7 <7> [129.207245] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[23] 0x405c 0x7b7 <7> [129.207333] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[24] 0x4060 0x37 <7> [129.207420] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[25] 0x4064 0x37 <7> [129.207504] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[26] 0x4068 0x37 <7> [129.207588] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[27] 0x406c 0x37 <7> [129.207673] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[28] 0x4070 0x37 <7> [129.207759] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[29] 0x4074 0x37 <7> [129.207842] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[30] 0x4078 0x37 <7> [129.207923] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[31] 0x407c 0x37 <7> [129.208024] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[32] 0x4080 0x37 <7> [129.208111] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[33] 0x4084 0x37 <7> [129.208197] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[34] 0x4088 0x37 <7> [129.208279] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[35] 0x408c 0x37 <7> [129.208364] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[36] 0x4090 0x37 <7> [129.208452] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[37] 0x4094 0x37 <7> [129.208537] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[38] 0x4098 0x37 <7> [129.208619] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[39] 0x409c 0x37 <7> [129.208700] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[40] 0x40a0 0x37 <7> [129.208784] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[41] 0x40a4 0x37 <7> [129.208871] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[42] 0x40a8 0x37 <7> [129.208962] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[43] 0x40ac 0x37 <7> [129.209044] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[44] 0x40b0 0x37 <7> [129.209127] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[45] 0x40b4 0x37 <7> [129.209215] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[46] 0x40b8 0x37 <7> [129.209304] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[47] 0x40bc 0x37 <7> [129.209390] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[48] 0x40c0 0x37 <7> [129.209474] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[49] 0x40c4 0x5 <7> [129.209559] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[50] 0x40c8 0x37 <7> [129.209641] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[51] 0x40cc 0x5 <7> [129.209728] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[52] 0x40d0 0x37 <7> [129.209814] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[53] 0x40d4 0x37 <7> [129.209901] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[54] 0x40d8 0x37 <7> [129.209993] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[55] 0x40dc 0x37 <7> [129.210078] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[56] 0x40e0 0x37 <7> [129.210167] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[57] 0x40e4 0x37 <7> [129.210255] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[58] 0x40e8 0x37 <7> [129.210339] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[59] 0x40ec 0x37 <7> [129.210423] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[60] 0x40f0 0x37 <7> [129.210505] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[61] 0x40f4 0x5 <7> [129.210589] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[62] 0x40f8 0x37 <7> [129.210676] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[63] 0x40fc 0x37 <7> [129.210762] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: l3cc entries: 64 <7> [129.210850] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[0] 0xb020 0x300030 <7> [129.210942] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[1] 0xb024 0x100030 <7> [129.211044] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[2] 0xb028 0x100030 <7> [129.211134] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[3] 0xb02c 0x300010 <7> [129.211221] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[4] 0xb030 0x300010 <7> [129.211305] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[5] 0xb034 0x300010 <7> [129.211388] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[6] 0xb038 0x300010 <7> [129.211474] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[7] 0xb03c 0x300010 <7> [129.211561] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[8] 0xb040 0x300030 <7> [129.211646] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[9] 0xb044 0x300030 <7> [129.211730] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[10] 0xb048 0x300030 <7> [129.211817] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[11] 0xb04c 0x300030 <7> [129.211902] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[12] 0xb050 0x300030 <7> [129.211995] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[13] 0xb054 0x300030 <7> [129.212082] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[14] 0xb058 0x300030 <7> [129.212169] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[15] 0xb05c 0x300030 <7> [129.212253] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[16] 0xb060 0x300030 <7> [129.212336] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[17] 0xb064 0x300030 <7> [129.212419] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[18] 0xb068 0x300030 <7> [129.212505] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[19] 0xb06c 0x300030 <7> [129.212592] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[20] 0xb070 0x300030 <7> [129.212677] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[21] 0xb074 0x300030 <7> [129.212766] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[22] 0xb078 0x300030 <7> [129.212854] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[23] 0xb07c 0x300030 <7> [129.212942] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[24] 0xb080 0x300030 <7> [129.213026] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[25] 0xb084 0x100010 <7> [129.213111] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[26] 0xb088 0x300030 <7> [129.213200] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[27] 0xb08c 0x300030 <7> [129.213285] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[28] 0xb090 0x300030 <7> [129.213369] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[29] 0xb094 0x300030 <7> [129.213451] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[30] 0xb098 0x300010 <7> [129.213537] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[31] 0xb09c 0x100010 <7> [129.213625] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7> [129.213729] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10801080 <7> [129.213828] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2098] = 0xffffffff <7> [129.213932] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20a0] = 0x24a80000 <7> [129.214029] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7> [129.214120] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20e0] = 0x40004000 <7> [129.214208] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20ec] = 0x00020002 <7> [129.214297] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x229c] = 0x00080008 <7> [129.214389] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x10002349 <7> [129.214476] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x00007010 <7> [129.214561] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x00007018 <7> [129.214647] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000dafc <7> [129.214737] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x1000db01 <7> [129.214824] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e4] = 0x0000db1c <7> [129.214913] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb004] = 0x2fc0100f <7> [129.215011] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe18c] = 0x80018001 <7> [129.215104] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7> [129.215195] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f4] = 0x41004100 <7> [129.215395] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7> [129.215486] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22098] = 0xffffffff <7> [129.215575] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7> [129.215671] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2229c] = 0x00080008 <7> [129.215765] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x224d0] = 0x100223a8 <7> [129.215968] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying vcs2 save-restore MMIOs <7> [129.216061] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1d0098] = 0xffffffff <7> [129.216149] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1d00c4] = 0x3f7e0306 <7> [129.216238] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1d029c] = 0x00080008 <7> [129.216325] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1d04d0] = 0x101d03a8 <7> [129.216505] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying vecs0 save-restore MMIOs <7> [129.216597] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c8098] = 0xffffffff <7> [129.216686] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c80c4] = 0x3f7e0306 <7> [129.216775] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c829c] = 0x00080008 <7> [129.216870] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c84d0] = 0x101c83a8 <7> [129.217281] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [129.217435] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004551cf <7> [129.217537] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00044000 <7> [129.217628] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7> [129.217714] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [129.217798] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cac <7> [129.217881] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x46a3000c <7> [129.217975] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [129.218062] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [129.218146] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [129.218229] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [129.218310] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [129.218390] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [129.218469] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [129.218550] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [129.218658] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7> [129.218853] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7> [129.220818] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0x1767000 for xe_guc_buf_cache_init_with_size [xe] <7> [129.223439] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 6 ext-regs. <7> [129.241465] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 32768 (was 40960) <7> [129.262084] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 19ms, freq = 1150MHz (req = 1200MHz), before = 1150MHz, status = 0x8002F0EC <7> [129.262399] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [129.263426] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 14372 dwords <7> [129.263587] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x2580] = 0x00060002 <7> [129.263685] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7018] = 0x20002000 <7> [129.263779] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x00400040 <7> [129.263865] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7304] = 0x02000200 <7> [129.263969] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6604] = ~0xffff0000\|0xe0040000 <7> [129.264076] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 12.00 <7> [129.266552] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 36 dwords <7> [129.266675] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x2580] = 0x00060002 <7> [129.266775] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7018] = 0x20002000 <7> [129.266871] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x00400040 <7> [129.266978] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7304] = 0x02000200 <7> [129.267081] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e\|0x606 <7> [129.267168] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 12.00 <7> [129.269220] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC vcs2 WA job: 9 dwords <7> [129.269469] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x2580] = 0x00060002 <7> [129.269682] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7018] = 0x20002000 <7> [129.269778] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x00400040 <7> [129.269867] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7304] = 0x02000200 <7> [129.269966] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 12.00 <7> [129.271207] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC vecs0 WA job: 9 dwords <7> [129.271312] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x2580] = 0x00060002 <7> [129.271405] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7018] = 0x20002000 <7> [129.271493] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x00400040 <7> [129.271581] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7304] = 0x02000200 <7> [129.271667] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 12.00 <7> [129.279983] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT0: HuC: authenticated via GuC <7> [129.280264] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 <7> [129.280479] xe 0000:00:02.0: [drm:i915_hdcp_component_bind [xe]] I915 HDCP comp bind <6> [129.280627] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [xe]) <7> [129.280728] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 0: start 0x90008 <7> [129.280856] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 1: start 0x90108 <7> [129.280980] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 2: start 0x90208 <7> [129.281083] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 3: start 0x90308 <7> [129.281181] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 4: start 0x903c8 <7> [129.281276] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 0: start 0x98008 <7> [129.281370] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 1: start 0x98108 <7> [129.281464] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 2: start 0x98208 <7> [129.281557] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 3: start 0x98308 <7> [129.281648] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 4: start 0x983c8 <7> [129.281748] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008 <7> [129.281846] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108 <7> [129.281951] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208 <7> [129.282048] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308 <7> [129.282142] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8 <7> [129.282233] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 0: start 0x59008 <7> [129.282324] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 1: start 0x59108 <7> [129.282423] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 2: start 0x59208 <7> [129.282518] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 3: start 0x59308 <7> [129.282610] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 4: start 0x593c8 <7> [129.282910] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [129.283148] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7> [129.283371] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [129.283470] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7> [129.283575] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4027 - 4096), size 0 -> 69 <7> [129.283695] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: no [fastset] <7> [129.283831] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset] <7> [129.283961] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:505:pipe D] enable: no [fastset] <7> [129.284762] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7> [129.284887] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [129.293791] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe B] <7> [129.293993] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C] <7> [129.294156] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:505:pipe D] <7> [129.297728] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:508:eDP-1] adding connector to sysfs <7> [129.300904] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:508:eDP-1] backlight device intel_backlight registered <7> [129.301133] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:508:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [129.301292] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:508:eDP-1] Panel prepare <7> [129.301662] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [129.303341] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:508:eDP-1] generating connector hotplug event <7> [129.303410] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:517:HDMI-A-1] adding connector to sysfs <7> [129.303724] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:517:HDMI-A-1] generating connector hotplug event <7> [129.303775] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:526:DP-1] adding connector to sysfs <7> [129.304330] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7> [129.305273] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:526:DP-1] generating connector hotplug event <7> [129.305315] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:536:DP-2] adding connector to sysfs <7> [129.305924] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7> [129.306910] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:536:DP-2] generating connector hotplug event <7> [129.307136] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:545:DP-3] adding connector to sysfs <7> [129.307912] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7> [129.309126] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:545:DP-3] generating connector hotplug event <7> [129.309191] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:554:DP-4] adding connector to sysfs <7> [129.309880] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7> [129.310911] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:554:DP-4] generating connector hotplug event <6> [129.319065] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7> [129.319075] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 6 outputs detected <6> [129.332732] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [129.336922] input: Video Bus as /devices/pci0000:00/acpi.video_bus.0/input/input5 <7> [129.339182] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [129.339349] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=768 <7> [129.340308] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6> [129.340313] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7> [129.341786] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:35:plane 1A] no fb, skipping <7> [129.342064] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:269:pipe B] not active, skipping <7> [129.342200] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping <7> [129.342340] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:505:pipe D] not active, skipping <7> [129.342303] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1] <7> [129.342441] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7> [129.342760] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [129.346611] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:517:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [129.346807] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-1] <7> [129.347087] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [129.347338] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:526:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [129.347516] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:536:DP-2] <7> [129.347755] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: live status 00000008 mismatches the legacy port flag 00000006, fixing flag <7> [129.348155] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_USBC2 <7> [129.348373] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7> [129.369503] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.390600] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.413270] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.434342] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.455396] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.476446] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.497499] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.518549] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.539594] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.560640] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.581685] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.602975] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.624024] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.645070] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.666115] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.687160] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.708206] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.729254] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.750297] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.771339] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.792384] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.813432] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.834481] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.855529] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.876570] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.897611] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.918653] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.939693] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.960743] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [129.981793] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.002840] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.023888] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.024073] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110 <7> [130.024247] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:536:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [130.024301] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=27/552 <7> [130.024508] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:508:eDP-1] set backlight level = 27 <7> [130.024637] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:508:eDP-1] set backlight PWM = 6844 <7> [130.024780] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:545:DP-3] <7> [130.025021] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [130.025221] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:545:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7> [130.025395] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:554:DP-4] <7> [130.025629] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [130.025829] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:554:DP-4] status updated from unknown to disconnected (epoch counter 0->1) <7> [130.026197] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <6> [130.026659] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7> [130.027324] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] <7> [130.027342] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1] <7> [130.028834] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [130.029140] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [130.029690] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [130.029880] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [130.030076] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000 <7> [130.030561] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [130.030570] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [130.030575] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor <7> [130.030581] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0 <7> [130.030609] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no <7> [130.030754] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [130.030877] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [130.031422] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] status updated from unknown to connected <7> [130.031647] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes: <7> [130.031654] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa <7> [130.031657] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa <7> [130.031662] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] <7> [130.031666] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1] <7> [130.032003] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [130.034820] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9701 <7> [130.035712] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [130.035758] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7> [130.035891] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected <7> [130.035900] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1] <7> [130.035905] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-1] <7> [130.036156] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1] disconnected <7> [130.036161] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2] <7> [130.036163] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:536:DP-2] <7> [130.057237] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.078444] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.082346] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7> [130.082510] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7> [130.082641] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7> [130.082760] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7> [130.082876] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7> [130.083019] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7> [130.083136] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7> [130.083254] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7> [130.083367] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7> [130.083476] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7> [130.083587] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7> [130.083703] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7> [130.083816] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7> [130.083937] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7> [130.084048] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7> [130.084155] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7> [130.084262] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7> [130.084375] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7> [130.084489] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7> [130.084599] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7> [130.084707] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7> [130.084825] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7> [130.084948] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7> [130.085056] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7> [130.085161] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7> [130.085266] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7> [130.085375] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7> [130.085492] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7> [130.085601] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7> [130.085709] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7> [130.085824] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7> [130.086073] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7> [130.086188] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7> [130.086298] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7> [130.086408] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7> [130.086525] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <6> [130.094358] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6> [130.096255] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6> [130.097616] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6> [130.098558] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7> [130.099681] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.120767] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.141958] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.163071] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.184112] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.205134] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.226144] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.247133] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.268134] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.289127] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.310114] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.331109] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.352108] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.373098] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.394092] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.415093] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.436094] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.457122] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.478124] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.499112] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.520111] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.541101] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.562479] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.583486] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.604480] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.625470] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.646476] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.667469] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.688451] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.709431] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [130.709575] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110 <7> [130.709606] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2] disconnected <7> [130.709616] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3] <7> [130.709620] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:545:DP-3] <7> [130.709800] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3] disconnected <7> [130.709803] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4] <7> [130.709806] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:554:DP-4] <7> [130.709989] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4] disconnected <7> [130.709997] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] enabled? yes <7> [130.710003] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:517:HDMI-A-1] enabled? no <7> [130.710008] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-1] enabled? no <7> [130.710012] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:536:DP-2] enabled? no <7> [130.710016] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:545:DP-3] enabled? no <7> [130.710020] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:554:DP-4] enabled? no <7> [130.710274] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [130.710308] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] found preferred mode: 3840x2160 <7> [130.710312] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [130.710329] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 3840x2160 set (0,0) <7> [130.710466] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [130.710480] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <6> [130.710608] xe 0000:00:02.0: [drm] Allocating fbdev: Stolen memory not preferred. <7> [130.721463] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 3840x2160 fb <6> [130.722570] fbcon: xedrmfb (fb0) is primary device <7> [130.723783] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:508:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [130.724074] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:507:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 538600 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [130.724216] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 HDR no link rate required 2019750 available 2160000 <7> [130.724356] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [130.724488] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:507:DDI A/PHY A] [CRTC:151:pipe A] <7> [130.724618] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dpll_hw_state <7> [130.724739] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7> [130.724855] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] dpll_hw_state: cfgcr0: 0x1c2, cfgcr1: 0x84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [130.724988] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7> [130.725155] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] dpll_hw_state: cfgcr0: 0xe001a5, cfgcr1: 0x48, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [130.725325] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7> [130.725451] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7> [130.725565] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1) <7> [130.725676] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [130.725793] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0 <7> [130.725968] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027 <7> [130.726106] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [130.726269] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 <7> [130.726381] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 <7> [130.726484] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 <7> [130.726581] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.726673] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.726762] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.726851] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.726951] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.727082] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.727185] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.727282] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.727373] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.727463] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.727550] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.727645] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.727737] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.727826] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.727915] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.728024] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.728134] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [130.728229] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.728316] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.728409] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [130.728521] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 2154400 num active planes 1 <7> [130.728654] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 11064 required 2155 <7> [130.728780] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 13813 required 2155 <7> [130.728902] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 14899 required 2155 <7> [130.729032] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 13010 required 2155 <7> [130.729159] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] PSF GV point 0: max bw 34133 required 2155 <7> [130.729267] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] PSF GV point 1: max bw 51200 required 2155 <7> [130.729381] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] PSF GV point 2: max bw 51200 required 2155 <7> [130.729512] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated DPLL 0 <7> [130.729638] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0 <7> [130.729760] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset] <7> [130.729885] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [130.730014] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [130.730152] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [130.730275] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [130.730387] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [130.730496] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [130.730602] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 7843931, data_n: 8388608, link_m: 522928, link_n: 524288, tu: 64 <7> [130.730708] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [130.730813] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7> [130.730919] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [130.731041] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [130.731165] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7> [130.731276] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [130.731385] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [130.731490] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [130.731593] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [130.731701] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [130.731806] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [130.731909] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [130.732039] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [130.732167] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7> [130.732278] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 2244, vmax: 2244, flipline: 2244, pipeline full: 0, guardband: 82 vsync start: 81, vsync end: 76 <7> [130.732385] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 2162, vmax vblank: 2162, vmin vtotal: 2244, vmax vtotal: 2244 <7> [130.732492] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [130.732602] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa <7> [130.732708] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa <7> [130.732811] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2161-2244 vs=2163-2168 vt=2244, flags=0xa <7> [130.732919] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa <7> [130.733043] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2161-2244 vs=2163-2168 vt=2244, flags=0xa <7> [130.733168] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 540000, pixel rate 538600, min cdclk 269300, min voltage level 0 <7> [130.733271] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 60, ips linetime: 0 <7> [130.733372] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [130.733473] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 3840x2160+0+0 <7> [130.733573] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [130.733672] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [130.733771] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [130.733869] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: cfgcr0: 0xe001a5, cfgcr1: 0x48, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [130.734005] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [130.734165] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [130.734313] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [130.734424] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [130.734530] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [130.734640] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [130.734752] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [130.734877] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [130.735050] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [130.735177] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [130.735283] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [130.735386] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [130.735488] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:509] 3840x2160 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [130.735592] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [130.735700] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 3840.000000x2160.000000+0.000000+0.000000 dst: 3840x2160+0+0 <7> [130.735844] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [130.736020] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [130.736137] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [130.736246] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [130.736350] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [130.737035] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [130.939367] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:508:eDP-1] set backlight PWM = 0 <7> [130.940984] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [130.945404] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000 <7> [130.945522] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power off <7> [130.945983] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:507:DDI A/PHY A] - short <7> [130.946808] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power off time <7> [130.947386] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [131.001842] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7> [131.002514] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:507:DDI A/PHY A] - long <7> [131.003112] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [131.005325] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [131.006121] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DDI_IO_A <7> [131.006750] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:507:DDI A/PHY A] <7> [131.006846] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A] <7> [131.008625] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A] <7> [131.009533] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [131.009976] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [131.010769] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI A/PHY A] <7> [131.011256] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:516:DDI B/PHY B] <7> [131.011590] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC1/PHY TC1] <7> [131.011887] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A] <7> [131.012270] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B] <7> [131.012643] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C] <7> [131.013038] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D] <7> [131.013349] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:535:DDI TC2/PHY TC2] <7> [131.013633] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DP-MST A] <7> [131.013903] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DP-MST B] <7> [131.014199] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:539:DP-MST C] <7> [131.014463] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DP-MST D] <7> [131.014718] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DDI TC3/PHY TC3] <7> [131.014982] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST A] <7> [131.015251] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST B] <7> [131.015518] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:548:DP-MST C] <7> [131.015769] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:549:DP-MST D] <7> [131.016035] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:553:DDI TC4/PHY TC4] <7> [131.016278] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:555:DP-MST A] <7> [131.016508] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:556:DP-MST B] <7> [131.016748] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:557:DP-MST C] <7> [131.016991] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:558:DP-MST D] <7> [131.017325] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [131.017948] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A] <7> [131.018208] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [131.018469] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power on <7> [131.018623] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power cycle (488 ms remaining) <7> [131.060846] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [131.515404] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [131.567421] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [131.568272] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power on <7> [131.568908] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7> [131.630590] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7> [131.631295] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:507:DDI A/PHY A] - long <7> [131.631891] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7> [131.633411] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A] <7> [131.764484] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [131.764620] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [131.764716] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_USBC2 <7> [131.765984] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7> [131.781193] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [131.781856] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DDI_IO_A <7> [131.782700] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:507:DDI A/PHY A] PPS 0 turning VDD on <7> [131.783374] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:507:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7> [131.785402] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 44 41 00 00 01 c0 02 00 02 00 00 0b 80 <7> [131.785455] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [131.786317] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 06 <7> [131.787482] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [131.787902] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [131.788992] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Clock recovery OK <7> [131.789326] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7> [131.790764] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [131.791103] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [131.791748] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [131.792224] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [131.792531] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7> [131.792824] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:508:eDP-1] Performing OUI wait (0 ms) <7> [131.793747] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:508:eDP-1] set backlight PWM = 6844 <7> [131.826085] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [131.829644] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:508:eDP-1] <7> [131.830252] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A] <7> [131.830801] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7> [131.831396] xe 0000:00:02.0: [drm:icl_sagv_post_plane_update [xe]] Relaxing QGV points: 0x10b -> 0x0 <6> [131.833628] Console: switching to colour frame buffer device 240x67 <6> [131.884383] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7> [131.884501] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 13 <7> [131.885102] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: D0 <7> [131.885534] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7> [131.885787] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7> [131.886034] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: no <7> [131.886247] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7> [131.886461] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7> [131.886752] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7> [131.887035] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7> [131.887221] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7> [131.887395] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7> [131.887560] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7> [131.887716] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7> [131.887964] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7> [131.888151] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7> [131.888299] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7> [131.888440] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7> [131.888571] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7> [131.888706] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7> [131.888885] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7> [131.889049] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7> [131.889173] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 19200 kHz <7> [131.889714] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7> [131.889838] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7> [131.889995] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7> [131.890116] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [131.890233] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <5> [131.895616] xe 0000:00:02.0: [drm] PF: migration missing prerequisite: requires GuC version >= 70.54.0 <7> [131.896313] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7> [131.909158] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [131.909182] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [131.909812] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] <7> [131.909835] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1] <7> [131.911110] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [131.911815] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [131.912188] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [131.912597] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000 <7> [131.913217] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [131.913230] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [131.913240] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor <7> [131.913264] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0 <7> [131.913325] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no <7> [131.913643] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [131.914233] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [131.915341] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes: <7> [131.915370] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa <7> [131.915381] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa <7> [131.915392] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] <7> [131.915402] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1] <7> [131.919757] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected <7> [131.919767] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1] <7> [131.919773] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-1] <7> [131.920090] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [131.920321] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1] disconnected <7> [131.920328] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2] <7> [131.920333] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:536:DP-2] <7> [131.920568] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [131.920770] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_USBC2 <7> [131.921169] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7> [131.942275] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [131.963300] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [131.984313] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.005322] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.026328] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.047335] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.068341] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.089350] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.110361] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.131367] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.152373] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.173380] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.194384] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.215389] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.236395] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.257403] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.278411] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.299414] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.320417] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.341420] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.362424] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.383427] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.404429] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.425434] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.446438] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.467441] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.488444] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.509447] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.530451] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.551453] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.572456] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.593461] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.593608] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110 <7> [132.593654] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2] disconnected <7> [132.593664] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3] <7> [132.593669] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:545:DP-3] <7> [132.593867] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [132.594029] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3] disconnected <7> [132.594033] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4] <7> [132.594037] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:554:DP-4] <7> [132.594234] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [132.594386] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4] disconnected <7> [132.594390] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] enabled? yes <7> [132.594394] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:517:HDMI-A-1] enabled? no <7> [132.594397] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-1] enabled? no <7> [132.594400] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:536:DP-2] enabled? no <7> [132.594403] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:545:DP-3] enabled? no <7> [132.594405] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:554:DP-4] enabled? no <7> [132.594636] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [132.594667] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] found preferred mode: 3840x2160 <7> [132.594670] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config <7> [132.594712] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 3840x2160 set (0,0) <7> [132.616109] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [132.632900] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [132.632915] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [132.633318] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] <7> [132.633331] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1] <7> [132.633902] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [132.634643] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 <7> [132.634785] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [132.635136] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000 <7> [132.635734] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [132.635748] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [132.635758] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor <7> [132.635777] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0 <7> [132.635830] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no <7> [132.636422] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [132.636525] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [132.637620] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes: <7> [132.637665] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa <7> [132.637676] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa <7> [132.637687] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] <7> [132.637698] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1] <7> [132.642215] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected <7> [132.642222] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1] <7> [132.642226] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-1] <7> [132.642416] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1] disconnected <7> [132.642421] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2] <7> [132.642424] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:536:DP-2] <7> [132.663511] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.684692] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.705674] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.726642] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.747604] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.768561] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.789517] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.810471] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.831430] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.852386] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.873341] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.894294] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.915255] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.936215] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.957170] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.978130] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [132.999090] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [133.020047] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [133.041002] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [133.061964] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [133.082921] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [133.104181] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [133.125149] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [133.146110] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [133.167074] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [133.188041] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [133.209004] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [133.229961] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [133.250916] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [133.271932] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [133.292897] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [133.313888] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f) <7> [133.314028] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110 <7> [133.314066] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2] disconnected <7> [133.314076] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3] <7> [133.314080] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:545:DP-3] <7> [133.314237] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3] disconnected <7> [133.314241] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4] <7> [133.314244] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:554:DP-4] <7> [133.314392] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4] disconnected <7> [133.314395] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] enabled? yes <7> [133.314403] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:517:HDMI-A-1] enabled? no <7> [133.314405] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-1] enabled? no <7> [133.314407] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:536:DP-2] enabled? no <7> [133.314409] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:545:DP-3] enabled? no <7> [133.314410] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:554:DP-4] enabled? no <7> [133.314633] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [133.314659] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] found preferred mode: 3840x2160 <7> [133.314661] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config <7> [133.314688] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 3840x2160 set (0,0) <7> [133.335174] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [133.402248] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [133.402415] [IGT] xe_module_load: finished subtest load, SUCCESS <6> [133.402877] [IGT] xe_module_load: exiting, ret=0

<4> [127.926364] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030

<5> [128.407163] Setting dangerous option force_probe - tainting kernel

<7> [128.415135] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error

<6> [128.415468] xe 0000:00:02.0: [drm] Found alderlake_p (device ID 46a3) integrated display version 13.00 stepping D0

<7> [128.415476] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] ALDERLAKE_P 46a3:000c dgfx:0 gfx:Xe_LP (12.00) media:Xe_M (12.00) display:yes dma_m_s:39 tc:1 gscfi:0 cscfi:0

<7> [128.415598] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:C0, M:C0, B:**)

<7> [128.415702] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)

<5> [128.415827] xe 0000:00:02.0: [drm] PF: migration missing prerequisite: requires memory-based IRQ support

<7> [128.417516] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 62914560 bytes

<7> [128.417666] xe 0000:00:02.0: [drm:intel_pch_type [xe]] Found Alder Lake PCH

<7> [128.417797] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [128.417938] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x449ff018

<7> [128.418088] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 2.1.0

<7> [128.418192] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported

<7> [128.418289] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported

<7> [128.418382] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported

<7> [128.418496] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [128.418729] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: DDR4

<7> [128.418871] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 2

<7> [128.418998] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4

<7> [128.419104] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 3

<7> [128.419306] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2134 tRP=15 tRDPRE=8 tRAS=35 tRCD=15 tRC=50

<7> [128.419470] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=2934 tRP=21 tRDPRE=12 tRAS=47 tRCD=21 tRC=68

<7> [128.419618] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=3201 tRP=22 tRDPRE=12 tRAS=52 tRCD=22 tRC=74

<7> [128.419758] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=2668 tRP=19 tRDPRE=10 tRAS=43 tRCD=19 tRC=62

<7> [128.419893] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] PSF GV 0: CLK=32

<7> [128.420017] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] PSF GV 1: CLK=48

<7> [128.420130] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] PSF GV 2: CLK=48

<7> [128.420236] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=9299 peakbw: 34144

<7> [128.420341] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=10925 peakbw: 46944

<7> [128.420443] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=11707 peakbw: 51216

<7> [128.420556] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=10508 peakbw: 42688

<7> [128.420664] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / PSF GV 0: num_planes=0 bw=34133

<7> [128.420768] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / PSF GV 1: num_planes=0 bw=51200

<7> [128.420870] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / PSF GV 2: num_planes=0 bw=51200

<7> [128.420985] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=2 deratedbw=11064 peakbw: 34144

<7> [128.421097] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=2 deratedbw=13813 peakbw: 46944

<7> [128.421202] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=2 deratedbw=14899 peakbw: 51216

<7> [128.421306] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=2 deratedbw=13010 peakbw: 42688

<7> [128.421408] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / PSF GV 0: num_planes=2 bw=34133

<7> [128.421511] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / PSF GV 1: num_planes=2 bw=51200

<7> [128.421618] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / PSF GV 2: num_planes=2 bw=51200

<7> [128.421721] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=12225 peakbw: 34144

<7> [128.421823] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=15917 peakbw: 46944

<7> [128.421923] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=17252 peakbw: 51216

<7> [128.422083] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=14768 peakbw: 42688

<7> [128.422184] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / PSF GV 0: num_planes=0 bw=34133

<7> [128.422295] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / PSF GV 1: num_planes=0 bw=51200

<7> [128.422401] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / PSF GV 2: num_planes=0 bw=51200

<7> [128.422504] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=12902 peakbw: 34144

<7> [128.422609] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=17230 peakbw: 46944

<7> [128.422717] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=18731 peakbw: 51216

<7> [128.422916] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=15838 peakbw: 42688

<7> [128.423036] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / PSF GV 0: num_planes=0 bw=34133

<7> [128.423141] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / PSF GV 1: num_planes=0 bw=51200

<7> [128.423241] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / PSF GV 2: num_planes=0 bw=51200

<7> [128.423352] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=13269 peakbw: 34144

<7> [128.423458] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=17970 peakbw: 46944

<7> [128.423560] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=19569 peakbw: 51216

<7> [128.423661] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=16433 peakbw: 42688

<7> [128.423760] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / PSF GV 0: num_planes=0 bw=34133

<7> [128.423860] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / PSF GV 1: num_planes=0 bw=51200

<7> [128.423981] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / PSF GV 2: num_planes=0 bw=51200

<7> [128.424091] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=13460 peakbw: 34144

<7> [128.424192] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=18365 peakbw: 46944

<7> [128.424299] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=20017 peakbw: 51216

<7> [128.424405] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=16748 peakbw: 42688

<7> [128.424508] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / PSF GV 0: num_planes=0 bw=34133

<7> [128.424609] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / PSF GV 1: num_planes=0 bw=51200

<7> [128.424709] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / PSF GV 2: num_planes=0 bw=51200

<7> [128.424853] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 19200 kHz

<7> [128.425344] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz

<7> [128.425484] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT ALDERLAKE-P ", BDB version 251

<7> [128.425608] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)

<7> [128.425734] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 395, min size 5)

<7> [128.425855] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)

<7> [128.425985] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)

<7> [128.426097] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 850)

<7> [128.426205] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)

<7> [128.426308] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers

<7> [128.426422] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)

<7> [128.426541] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)

<7> [128.426652] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)

<7> [128.426762] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 78, min size 136)

<7> [128.426868] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)

<7> [128.426985] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)

<7> [128.427086] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [128.427186] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2

<7> [128.427286] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806

<7> [128.427393] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2

<7> [128.427500] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [128.427612] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [128.427720] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [128.427832] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [128.427949] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping

<7> [128.428060] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [128.428166] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT HDMI level shift: 0

<7> [128.428268] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [128.428452] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port B VBT HDMI level shift: 0

<7> [128.428556] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [128.428662] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT HDMI level shift: 0

<7> [128.428850] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [128.429015] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT HDMI level shift: 0

<7> [128.429142] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [128.429246] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT HDMI level shift: 0

<7> [128.429353] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [128.429461] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port G VBT HDMI level shift: 0

<7> [128.429570] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a

<7> [128.429739] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [128.430029] xe 0000:00:02.0: [drm:check_phy_reg [xe]] Combo PHY A reg 001628a0 state mismatch: current 90033bbc mask e0000000 expected a0000000

<7> [128.430203] xe 0000:00:02.0: [drm:icl_combo_phys_init [xe]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [128.430468] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1

<7> [128.430604] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [128.430735] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [128.430938] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [128.431052] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [128.431162] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [128.431368] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [128.431481] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [128.431681] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [128.431834] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [128.432177] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [128.432690] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/adlp_dmc.bin

<7> [128.433500] xe 0000:00:02.0: [drm:intel_bw_init [xe]] Forcing SAGV disable: mask 0x10b

<7> [128.433837] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1

<7> [128.434041] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 35 us

<7> [128.434366] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided

<7> [128.434493] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 51 (51.0 usec)

<7> [128.434597] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 80 (80.0 usec)

<7> [128.434699] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 99 (99.0 usec)

<7> [128.434795] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 144 (144.0 usec)

<7> [128.434890] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 144 (144.0 usec)

<7> [128.435004] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 3 (3.0 usec)

<7> [128.435104] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 54 (54.0 usec)

<7> [128.435199] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 83 (83.0 usec)

<7> [128.435290] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 102 (102.0 usec)

<7> [128.435379] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 147 (147.0 usec)

<7> [128.435465] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 147 (147.0 usec)

<7> [128.439382] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:

<7> [128.439594] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0

<7> [128.439782] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [128.439966] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)

<7> [128.440125] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)

<7> [128.440285] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x512050d4 (EVT_HTP)

<7> [128.440449] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x8f03c = 0xc003b300 (EVT_CTL)

<7> [128.440607] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x8f00c = 0x584c57fc (EVT_HTP)

<7> [128.440747] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 4 display pipes available.

<7> [128.440802] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:

<7> [128.440981] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0

<7> [128.441143] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)

<7> [128.441302] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x214c2114 (EVT_HTP)

<7> [128.441467] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)

<7> [128.441624] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x22402208 (EVT_HTP)

<7> [128.441771] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)

<7> [128.441909] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x241422fc (EVT_HTP)

<7> [128.442042] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[7]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)

<7> [128.442156] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[8]: 0x5f010 = 0x26f826cc (EVT_HTP)

<7> [128.442274] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:

<7> [128.442399] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0

<7> [128.442503] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)

<7> [128.442646] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa968a930 (EVT_HTP)

<7> [128.442788] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)

<7> [128.442902] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xaa5caa24 (EVT_HTP)

<7> [128.443050] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)

<7> [128.443179] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xac30ab18 (EVT_HTP)

<7> [128.443294] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[7]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)

<7> [128.443400] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[8]: 0x5f410 = 0xaf14aee8 (EVT_HTP)

<7> [128.443524] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:

<7> [128.443642] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0

<7> [128.443793] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)

<7> [128.444383] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)

<7> [128.444538] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)

<7> [128.444708] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f810 = 0x280427d8 (EVT_HTP)

<7> [128.444880] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 4:

<7> [128.445101] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0

<7> [128.445222] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)

<7> [128.445343] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)

<7> [128.445483] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5fc40 = 0xc0033100 (EVT_CTL) (disabling)

<7> [128.445629] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5fc10 = 0x980497d8 (EVT_HTP)

<6> [128.447114] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/adlp_dmc.bin (v2.20)

<7> [128.450036] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [128.450210] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz

<7> [128.450349] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz

<7> [128.450493] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:507:DDI A/PHY A] Using AUX CH A (VBT)

<7> [128.450649] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:507:DDI A/PHY A]

<7> [128.450836] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2

<7> [128.450996] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2

<7> [128.451127] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless

<7> [128.451253] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [128.451371] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300

<7> [128.451481] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [128.451588] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName

<7> [128.451696] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz

<7> [128.451808] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [128.452113] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:507:DDI A/PHY A] initial power sequencer: PPS 0

<7> [128.452333] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [128.452444] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [128.452546] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [128.452644] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [128.452740] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [128.452979] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [128.453248] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [128.453420] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:507:DDI A/PHY A] PPS 0 turning VDD on

<7> [128.453628] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:507:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f

<7> [128.478945] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 44 41 00 00 01 c0 02 00 02 00 00 0b 80

<7> [128.491949] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [128.517943] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 04 92 a5 00 00

<7> [128.553944] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3

<7> [128.565945] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported

<7> [128.625947] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [128.973980] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [128.973994] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [128.973998] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor

<7> [128.974003] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0

<7> [128.974091] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:508:eDP-1] using preferred EDID fixed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa

<7> [128.974243] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:508:eDP-1] using alternate EDID fixed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa

<7> [128.985973] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:508:eDP-1] Performing OUI wait (0 ms)

<7> [128.997945] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:508:eDP-1] Detected Intel HDR backlight interface version 1

<7> [128.998064] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:508:eDP-1] Using Intel proprietary eDP backlight controls

<7> [128.998171] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:508:eDP-1] DRRS type: seamless

<7> [128.998298] xe 0000:00:02.0: [drm:intel_dp_aux_hdr_setup_backlight [xe]] [CONNECTOR:508:eDP-1] SDR backlight is controlled through PWM

<7> [128.998457] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:508:eDP-1] Using native PCH PWM for backlight control (controller=0)

<7> [129.009950] xe 0000:00:02.0: [drm:intel_dp_aux_hdr_setup_backlight [xe]] [CONNECTOR:508:eDP-1] Using AUX HDR interface for backlight control (range 0..552)

<7> [129.021978] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:508:eDP-1] backlight initialized, enabled, brightness 552/552

<7> [129.022173] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [129.022287] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [129.022391] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [129.022490] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [129.022582] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [129.022798] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [129.023097] xe 0000:00:02.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:516:DDI B/PHY B]

<7> [129.023220] xe 0000:00:02.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:516:DDI B/PHY B] Using DDC pin 0x2 (VBT)

<7> [129.023621] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:525:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)

<7> [129.023834] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected)

<7> [129.024138] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:525:DDI TC1/PHY TC1]

<7> [129.024529] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:535:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)

<7> [129.024689] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: legacy (ready: yes, owned: yes, HPD: legacy)

<7> [129.024802] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_USBC2

<7> [129.025144] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:535:DDI TC2/PHY TC2]

<7> [129.025651] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:544:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)

<7> [129.025850] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected)

<7> [129.026043] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:544:DDI TC3/PHY TC3]

<7> [129.026367] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:553:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT)

<7> [129.026529] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected)

<7> [129.026687] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:553:DDI TC4/PHY TC4]

<7> [129.027148] xe 0000:00:02.0: [drm:intel_vga_disable [xe]] VGA plane is disabled

<6> [129.027263] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io:owns=io+mem

<7> [129.027605] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] hw state readout: enabled

<7> [129.027728] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:269:pipe B] hw state readout: disabled

<7> [129.027841] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled

<7> [129.027962] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:505:pipe D] hw state readout: disabled

<7> [129.028062] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] hw state readout: enabled, pipe A

<7> [129.028159] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] hw state readout: disabled, pipe A

<7> [129.028256] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] hw state readout: disabled, pipe A

<7> [129.028351] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] hw state readout: disabled, pipe A

<7> [129.028454] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] hw state readout: disabled, pipe A

<7> [129.028553] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] hw state readout: disabled, pipe A

<7> [129.028648] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:153:plane 1B] hw state readout: disabled, pipe B

<7> [129.028740] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:plane 2B] hw state readout: disabled, pipe B

<7> [129.028832] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:213:plane 3B] hw state readout: disabled, pipe B

<7> [129.028923] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:243:plane 4B] hw state readout: disabled, pipe B

<7> [129.029037] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:253:plane 5B] hw state readout: disabled, pipe B

<7> [129.029138] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:263:cursor B] hw state readout: disabled, pipe B

<7> [129.029234] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C

<7> [129.029327] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C

<7> [129.029418] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C

<7> [129.029508] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C

<7> [129.029602] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C

<7> [129.029700] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C

<7> [129.029795] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:389:plane 1D] hw state readout: disabled, pipe D

<7> [129.029894] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:419:plane 2D] hw state readout: disabled, pipe D

<7> [129.030116] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:449:plane 3D] hw state readout: disabled, pipe D

<7> [129.030221] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:479:plane 4D] hw state readout: disabled, pipe D

<7> [129.030316] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:489:plane 5D] hw state readout: disabled, pipe D

<7> [129.030416] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:499:cursor D] hw state readout: disabled, pipe D

<7> [129.030523] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<7> [129.030683] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:507:DDI A/PHY A] hw state readout: enabled, pipe A

<7> [129.030803] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:516:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [129.030921] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [129.031148] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:525:DDI TC1/PHY TC1] hw state readout: disabled, pipe A

<7> [129.031254] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:527:DP-MST A] hw state readout: disabled, pipe A

<7> [129.031355] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST B] hw state readout: disabled, pipe B

<7> [129.031452] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:529:DP-MST C] hw state readout: disabled, pipe C

<7> [129.031548] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:530:DP-MST D] hw state readout: disabled, pipe D

<7> [129.031645] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: PHY left in legacy mode on disabled port, disconnecting it

<7> [129.031757] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_USBC2

<7> [129.031894] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [129.032009] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:535:DDI TC2/PHY TC2] hw state readout: disabled, pipe A

<7> [129.032114] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:537:DP-MST A] hw state readout: disabled, pipe A

<7> [129.032213] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:538:DP-MST B] hw state readout: disabled, pipe B

<7> [129.032309] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:539:DP-MST C] hw state readout: disabled, pipe C

<7> [129.032410] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:540:DP-MST D] hw state readout: disabled, pipe D

<7> [129.032512] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [129.032617] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DDI TC3/PHY TC3] hw state readout: disabled, pipe A

<7> [129.032714] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:546:DP-MST A] hw state readout: disabled, pipe A

<7> [129.032806] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:547:DP-MST B] hw state readout: disabled, pipe B

<7> [129.032902] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:548:DP-MST C] hw state readout: disabled, pipe C

<7> [129.033010] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:549:DP-MST D] hw state readout: disabled, pipe D

<7> [129.033104] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port G/TC#4: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [129.033207] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:553:DDI TC4/PHY TC4] hw state readout: disabled, pipe A

<7> [129.033303] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:555:DP-MST A] hw state readout: disabled, pipe A

<7> [129.033396] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:556:DP-MST B] hw state readout: disabled, pipe B

<7> [129.033487] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:557:DP-MST C] hw state readout: disabled, pipe C

<7> [129.033577] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:558:DP-MST D] hw state readout: disabled, pipe D

<7> [129.033676] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0

<7> [129.033795] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x1, on 1

<7> [129.033908] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [129.034027] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 0

<7> [129.034133] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [129.034236] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [129.034343] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [129.034453] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [129.034574] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:508:eDP-1] hw state readout: enabled

<7> [129.034691] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:517:HDMI-A-1] hw state readout: disabled

<7> [129.034799] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:526:DP-1] hw state readout: disabled

<7> [129.034903] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:536:DP-2] hw state readout: disabled

<7> [129.035117] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:545:DP-3] hw state readout: disabled

<7> [129.035238] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:554:DP-4] hw state readout: disabled

<7> [129.035451] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] min_cdclk 269300 kHz

<7> [129.035554] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] min_cdclk 0 kHz

<7> [129.035651] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] min_cdclk 0 kHz

<7> [129.035745] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] min_cdclk 0 kHz

<7> [129.035838] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] min_cdclk 0 kHz

<7> [129.035936] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] min_cdclk 0 kHz

<7> [129.036030] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] min_cdclk 269300 kHz

<7> [129.036131] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:153:plane 1B] min_cdclk 0 kHz

<7> [129.036227] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:plane 2B] min_cdclk 0 kHz

<7> [129.036319] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:213:plane 3B] min_cdclk 0 kHz

<7> [129.036409] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:243:plane 4B] min_cdclk 0 kHz

<7> [129.036498] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:253:plane 5B] min_cdclk 0 kHz

<7> [129.036590] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:263:cursor B] min_cdclk 0 kHz

<7> [129.036686] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:269:pipe B] min_cdclk 0 kHz

<7> [129.036778] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz

<7> [129.036867] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz

<7> [129.036979] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz

<7> [129.037068] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz

<7> [129.037156] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz

<7> [129.037248] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz

<7> [129.037344] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz

<7> [129.037437] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:389:plane 1D] min_cdclk 0 kHz

<7> [129.037527] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:419:plane 2D] min_cdclk 0 kHz

<7> [129.037621] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:449:plane 3D] min_cdclk 0 kHz

<7> [129.037716] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:479:plane 4D] min_cdclk 0 kHz

<7> [129.037810] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:489:plane 5D] min_cdclk 0 kHz

<7> [129.037899] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:499:cursor D] min_cdclk 0 kHz

<7> [129.037996] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:505:pipe D] min_cdclk 0 kHz

<7> [129.038117] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:151:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no

<7> [129.038224] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:269:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no

<7> [129.038323] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no

<7> [129.038418] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:505:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no

<7> [129.038512] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 2154400 num active planes 1

<7> [129.038646] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0

<7> [129.038769] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0

<7> [129.038885] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0

<7> [129.039010] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DDI_IO_A

<7> [129.039165] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: n/a, Transcoder A secondary: yes, Transcoder B secondary: no

<7> [129.039400] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [setup_hw_state]

<7> [129.039523] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [129.039647] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [129.039761] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [129.039870] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [129.039987] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [129.040092] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [129.040196] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 7843931, data_n: 8388608, link_m: 653660, link_n: 524288, tu: 64

<7> [129.040303] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [129.040411] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled

<7> [129.040522] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [129.040630] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [129.040735] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0

<7> [129.040838] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [129.040947] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [129.041049] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [129.041162] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [129.041273] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [129.041380] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [129.041485] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa

<7> [129.041588] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa

<7> [129.041698] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2160-2244 vs=2163-2168 vt=2244, flags=0xa

<7> [129.041808] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa

<7> [129.041914] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2160-2244 vs=2163-2168 vt=2244, flags=0xa

<7> [129.042029] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 538600, min cdclk 269300, min voltage level 0

<7> [129.042132] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 60, ips linetime: 0

<7> [129.042233] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [129.042334] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 3840x2160+0+0

<7> [129.042434] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [129.042533] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [129.042632] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [129.042731] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: cfgcr0: 0x1c2, cfgcr1: 0x84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [129.042837] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0

<7> [129.042953] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [129.043059] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [129.043163] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [129.043264] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [129.043365] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [129.043466] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [129.043566] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [129.043665] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [129.043773] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [129.043880] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [129.043995] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [129.044098] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: no [setup_hw_state]

<7> [129.044200] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state]

<7> [129.044307] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:505:pipe D] enable: no [setup_hw_state]

<7> [129.044583] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:151:pipe A][PLANE:35:plane 1A] with fb: size=3840x2160@32, offset=0, pitch 15360, size 0x1fa4000

<6> [129.044703] xe 0000:00:02.0: [drm] Initial FB size exceeds half of stolen, discarding

<7> [129.044705] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:35:plane 1A] on [CRTC:151:pipe A]

<6> [129.065473] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from i915/adlp_guc_70.bin version 70.49.4

<7> [129.069324] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004551cf

<7> [129.069471] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000

<7> [129.069570] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000

<7> [129.069660] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [129.069745] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cac

<7> [129.069827] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x46a3000c

<7> [129.069907] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [129.070004] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [129.070089] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [129.070173] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [129.070258] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [129.070346] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [129.070433] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [129.070518] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<6> [129.073304] xe 0000:00:02.0: [drm] Tile0: GT0: Using HuC firmware from i915/tgl_huc.bin version 7.9.3

<7> [129.073580] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [129.073730] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] Calculated GuC WOPCM [592K, 1420K)

<7> [129.095368] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 20ms, freq = 1150MHz (req = 1200MHz), before = 1150MHz, status = 0x8002F0EC

<7> [129.096080] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [129.096415] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,00000007

<7> [129.096544] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,00000000

<7> [129.096658] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 0000ffff

<7> [129.096766] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd8

<7> [129.096869] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000bb

<7> [129.201958] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine

<7> [129.202086] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x2340-0x234f]: allow read access

<7> [129.202208] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x7010-0x7013]: allow rw access

<7> [129.202314] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x7018-0x701b]: allow rw access

<7> [129.202409] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [129.202499] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb0f]: allow read access

<7> [129.202586] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [129.202726] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine

<7> [129.202815] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x223a8-0x223ab]: allow read access

<7> [129.202963] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add vcs2 whitelist to engine

<7> [129.203055] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x1d03a8-0x1d03ab]: allow read access

<7> [129.203209] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add vecs0 whitelist to engine

<7> [129.203294] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x1c83a8-0x1c83ab]: allow read access

<7> [129.204610] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs

<7> [129.204708] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x9424] = 0xfffffffc

<7> [129.204824] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x9550] = 0x000003ff

<7> [129.204936] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1d3f10] = 0x00400000

<7> [129.205032] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x3

<7> [129.205131] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 64

<7> [129.205227] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0x37

<7> [129.205320] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x37

<7> [129.205411] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x37

<7> [129.205505] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x5

<7> [129.205597] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x5

<7> [129.205684] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x37

<7> [129.205769] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x17

<7> [129.205853] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x17

<7> [129.205944] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x27

<7> [129.206042] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x27

<7> [129.206127] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x77

<7> [129.206216] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x77

<7> [129.206299] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x57

<7> [129.206382] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x57

<7> [129.206464] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x67

<7> [129.206546] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x67

<7> [129.206633] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[16] 0x4040 0x37

<7> [129.206719] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[17] 0x4044 0x37

<7> [129.206806] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[18] 0x4048 0x60037

<7> [129.206895] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[19] 0x404c 0x737

<7> [129.206993] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[20] 0x4050 0x337

<7> [129.207077] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[21] 0x4054 0x137

<7> [129.207161] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[22] 0x4058 0x3b7

<7> [129.207245] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[23] 0x405c 0x7b7

<7> [129.207333] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[24] 0x4060 0x37

<7> [129.207420] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[25] 0x4064 0x37

<7> [129.207504] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[26] 0x4068 0x37

<7> [129.207588] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[27] 0x406c 0x37

<7> [129.207673] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[28] 0x4070 0x37

<7> [129.207759] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[29] 0x4074 0x37

<7> [129.207842] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[30] 0x4078 0x37

<7> [129.207923] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[31] 0x407c 0x37

<7> [129.208024] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[32] 0x4080 0x37

<7> [129.208111] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[33] 0x4084 0x37

<7> [129.208197] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[34] 0x4088 0x37

<7> [129.208279] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[35] 0x408c 0x37

<7> [129.208364] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[36] 0x4090 0x37

<7> [129.208452] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[37] 0x4094 0x37

<7> [129.208537] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[38] 0x4098 0x37

<7> [129.208619] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[39] 0x409c 0x37

<7> [129.208700] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[40] 0x40a0 0x37

<7> [129.208784] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[41] 0x40a4 0x37

<7> [129.208871] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[42] 0x40a8 0x37

<7> [129.208962] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[43] 0x40ac 0x37

<7> [129.209044] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[44] 0x40b0 0x37

<7> [129.209127] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[45] 0x40b4 0x37

<7> [129.209215] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[46] 0x40b8 0x37

<7> [129.209304] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[47] 0x40bc 0x37

<7> [129.209390] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[48] 0x40c0 0x37

<7> [129.209474] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[49] 0x40c4 0x5

<7> [129.209559] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[50] 0x40c8 0x37

<7> [129.209641] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[51] 0x40cc 0x5

<7> [129.209728] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[52] 0x40d0 0x37

<7> [129.209814] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[53] 0x40d4 0x37

<7> [129.209901] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[54] 0x40d8 0x37

<7> [129.209993] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[55] 0x40dc 0x37

<7> [129.210078] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[56] 0x40e0 0x37

<7> [129.210167] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[57] 0x40e4 0x37

<7> [129.210255] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[58] 0x40e8 0x37

<7> [129.210339] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[59] 0x40ec 0x37

<7> [129.210423] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[60] 0x40f0 0x37

<7> [129.210505] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[61] 0x40f4 0x5

<7> [129.210589] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[62] 0x40f8 0x37

<7> [129.210676] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[63] 0x40fc 0x37

<7> [129.210762] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: l3cc entries: 64

<7> [129.210850] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[0] 0xb020 0x300030

<7> [129.210942] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[1] 0xb024 0x100030

<7> [129.211044] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[2] 0xb028 0x100030

<7> [129.211134] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[3] 0xb02c 0x300010

<7> [129.211221] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[4] 0xb030 0x300010

<7> [129.211305] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[5] 0xb034 0x300010

<7> [129.211388] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[6] 0xb038 0x300010

<7> [129.211474] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[7] 0xb03c 0x300010

<7> [129.211561] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[8] 0xb040 0x300030

<7> [129.211646] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[9] 0xb044 0x300030

<7> [129.211730] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[10] 0xb048 0x300030

<7> [129.211817] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[11] 0xb04c 0x300030

<7> [129.211902] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[12] 0xb050 0x300030

<7> [129.211995] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[13] 0xb054 0x300030

<7> [129.212082] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[14] 0xb058 0x300030

<7> [129.212169] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[15] 0xb05c 0x300030

<7> [129.212253] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[16] 0xb060 0x300030

<7> [129.212336] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[17] 0xb064 0x300030

<7> [129.212419] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[18] 0xb068 0x300030

<7> [129.212505] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[19] 0xb06c 0x300030

<7> [129.212592] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[20] 0xb070 0x300030

<7> [129.212677] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[21] 0xb074 0x300030

<7> [129.212766] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[22] 0xb078 0x300030

<7> [129.212854] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[23] 0xb07c 0x300030

<7> [129.212942] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[24] 0xb080 0x300030

<7> [129.213026] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[25] 0xb084 0x100010

<7> [129.213111] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[26] 0xb088 0x300030

<7> [129.213200] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[27] 0xb08c 0x300030

<7> [129.213285] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[28] 0xb090 0x300030

<7> [129.213369] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[29] 0xb094 0x300030

<7> [129.213451] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[30] 0xb098 0x300010

<7> [129.213537] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: LNCFCMOCS[31] 0xb09c 0x100010

<7> [129.213625] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs

<7> [129.213729] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10801080

<7> [129.213828] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2098] = 0xffffffff

<7> [129.213932] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20a0] = 0x24a80000

<7> [129.214029] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306

<7> [129.214120] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20e0] = 0x40004000

<7> [129.214208] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20ec] = 0x00020002

<7> [129.214297] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x229c] = 0x00080008

<7> [129.214389] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x10002349

<7> [129.214476] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x00007010

<7> [129.214561] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x00007018

<7> [129.214647] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000dafc

<7> [129.214737] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x1000db01

<7> [129.214824] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e4] = 0x0000db1c

<7> [129.214913] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb004] = 0x2fc0100f

<7> [129.215011] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe18c] = 0x80018001

<7> [129.215104] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200

<7> [129.215195] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f4] = 0x41004100

<7> [129.215395] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs

<7> [129.215486] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22098] = 0xffffffff

<7> [129.215575] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306

<7> [129.215671] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2229c] = 0x00080008

<7> [129.215765] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x224d0] = 0x100223a8

<7> [129.215968] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying vcs2 save-restore MMIOs

<7> [129.216061] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1d0098] = 0xffffffff

<7> [129.216149] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1d00c4] = 0x3f7e0306

<7> [129.216238] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1d029c] = 0x00080008

<7> [129.216325] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1d04d0] = 0x101d03a8

<7> [129.216505] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying vecs0 save-restore MMIOs

<7> [129.216597] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c8098] = 0xffffffff

<7> [129.216686] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c80c4] = 0x3f7e0306

<7> [129.216775] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c829c] = 0x00080008

<7> [129.216870] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c84d0] = 0x101c83a8

<7> [129.217281] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [129.217435] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004551cf

<7> [129.217537] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00044000

<7> [129.217628] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014

<7> [129.217714] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [129.217798] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cac

<7> [129.217881] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x46a3000c

<7> [129.217975] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [129.218062] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [129.218146] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [129.218229] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [129.218310] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [129.218390] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [129.218469] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [129.218550] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [129.218658] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs

<7> [129.218853] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells

<7> [129.220818] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0x1767000 for xe_guc_buf_cache_init_with_size [xe]

<7> [129.223439] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 6 ext-regs.

<7> [129.241465] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 32768 (was 40960)

<7> [129.262084] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 19ms, freq = 1150MHz (req = 1200MHz), before = 1150MHz, status = 0x8002F0EC

<7> [129.262399] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [129.263426] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 14372 dwords

<7> [129.263587] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x2580] = 0x00060002

<7> [129.263685] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7018] = 0x20002000

<7> [129.263779] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x00400040

<7> [129.263865] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7304] = 0x02000200

<7> [129.263969] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6604] = ~0xffff0000|0xe0040000

<7> [129.264076] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 12.00

<7> [129.266552] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 36 dwords

<7> [129.266675] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x2580] = 0x00060002

<7> [129.266775] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7018] = 0x20002000

<7> [129.266871] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x00400040

<7> [129.266978] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7304] = 0x02000200

<7> [129.267081] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606

<7> [129.267168] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 12.00

<7> [129.269220] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC vcs2 WA job: 9 dwords

<7> [129.269469] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x2580] = 0x00060002

<7> [129.269682] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7018] = 0x20002000

<7> [129.269778] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x00400040

<7> [129.269867] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7304] = 0x02000200

<7> [129.269966] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 12.00

<7> [129.271207] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC vecs0 WA job: 9 dwords

<7> [129.271312] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x2580] = 0x00060002

<7> [129.271405] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7018] = 0x20002000

<7> [129.271493] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x00400040

<7> [129.271581] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7304] = 0x02000200

<7> [129.271667] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 12.00

<7> [129.279983] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT0: HuC: authenticated via GuC

<7> [129.280264] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0

<7> [129.280479] xe 0000:00:02.0: [drm:i915_hdcp_component_bind [xe]] I915 HDCP comp bind

<6> [129.280627] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [xe])

<7> [129.280728] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 0: start 0x90008

<7> [129.280856] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 1: start 0x90108

<7> [129.280980] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 2: start 0x90208

<7> [129.281083] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 3: start 0x90308

<7> [129.281181] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 4: start 0x903c8

<7> [129.281276] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 0: start 0x98008

<7> [129.281370] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 1: start 0x98108

<7> [129.281464] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 2: start 0x98208

<7> [129.281557] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 3: start 0x98308

<7> [129.281648] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 4: start 0x983c8

<7> [129.281748] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008

<7> [129.281846] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108

<7> [129.281951] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208

<7> [129.282048] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308

<7> [129.282142] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8

<7> [129.282233] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 0: start 0x59008

<7> [129.282324] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 1: start 0x59108

<7> [129.282423] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 2: start 0x59208

<7> [129.282518] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 3: start 0x59308

<7> [129.282610] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 4: start 0x593c8

<7> [129.282910] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [129.283148] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1

<7> [129.283371] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [129.283470] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1

<7> [129.283575] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4027 - 4096), size 0 -> 69

<7> [129.283695] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: no [fastset]

<7> [129.283831] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset]

<7> [129.283961] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:505:pipe D] enable: no [fastset]

<7> [129.284762] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)

<7> [129.284887] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [129.293791] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe B]

<7> [129.293993] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C]

<7> [129.294156] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:505:pipe D]

<7> [129.297728] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:508:eDP-1] adding connector to sysfs

<7> [129.300904] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:508:eDP-1] backlight device intel_backlight registered

<7> [129.301133] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:508:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [129.301292] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:508:eDP-1] Panel prepare

<7> [129.301662] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [129.303341] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:508:eDP-1] generating connector hotplug event

<7> [129.303410] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:517:HDMI-A-1] adding connector to sysfs

<7> [129.303724] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:517:HDMI-A-1] generating connector hotplug event

<7> [129.303775] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:526:DP-1] adding connector to sysfs

<7> [129.304330] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1

<7> [129.305273] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:526:DP-1] generating connector hotplug event

<7> [129.305315] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:536:DP-2] adding connector to sysfs

<7> [129.305924] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2

<7> [129.306910] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:536:DP-2] generating connector hotplug event

<7> [129.307136] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:545:DP-3] adding connector to sysfs

<7> [129.307912] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3

<7> [129.309126] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:545:DP-3] generating connector hotplug event

<7> [129.309191] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:554:DP-4] adding connector to sysfs

<7> [129.309880] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4

<7> [129.310911] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:554:DP-4] generating connector hotplug event

<6> [129.319065] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0

<7> [129.319075] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 6 outputs detected

<6> [129.332732] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [129.336922] input: Video Bus as /devices/pci0000:00/acpi.video_bus.0/input/input5

<7> [129.339182] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)

<7> [129.339349] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=768

<7> [129.340308] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix

<6> [129.340313] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<7> [129.341786] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:35:plane 1A] no fb, skipping

<7> [129.342064] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:269:pipe B] not active, skipping

<7> [129.342200] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping

<7> [129.342340] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:505:pipe D] not active, skipping

<7> [129.342303] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]

<7> [129.342441] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config

<7> [129.346611] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:517:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [129.346807] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-1]

<7> [129.347087] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [129.347338] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:526:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [129.347516] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:536:DP-2]

<7> [129.347755] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: live status 00000008 mismatches the legacy port flag 00000006, fixing flag

<7> [129.348155] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_USBC2

<7> [129.348373] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4

<7> [129.369503] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.390600] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.413270] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.434342] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.455396] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.476446] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.497499] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.518549] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.539594] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.560640] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.581685] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.602975] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.624024] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.645070] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.666115] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.687160] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.708206] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.729254] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.750297] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.771339] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.792384] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.813432] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.834481] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.855529] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.876570] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.897611] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.918653] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.939693] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.960743] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [129.981793] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.002840] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.023888] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.024073] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110

<7> [130.024247] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:536:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [130.024301] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=27/552

<7> [130.024508] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:508:eDP-1] set backlight level = 27

<7> [130.024637] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:508:eDP-1] set backlight PWM = 6844

<7> [130.024780] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:545:DP-3]

<7> [130.025021] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [130.025221] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:545:DP-3] status updated from unknown to disconnected (epoch counter 0->1)

<7> [130.025395] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:554:DP-4]

<7> [130.025629] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [130.025829] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:554:DP-4] status updated from unknown to disconnected (epoch counter 0->1)

<7> [130.026197] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<6> [130.026659] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])

<7> [130.027324] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]

<7> [130.027342] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1]

<7> [130.028834] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<7> [130.029140] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [130.029690] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [130.029880] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [130.030076] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000

<7> [130.030561] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [130.030570] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [130.030575] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor

<7> [130.030581] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0

<7> [130.030609] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no

<7> [130.030754] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [130.030877] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [130.031422] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] status updated from unknown to connected

<7> [130.031647] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:

<7> [130.031654] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa

<7> [130.031657] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa

<7> [130.031662] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]

<7> [130.031666] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]

<7> [130.032003] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [130.034820] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9701

<7> [130.035712] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL

<7> [130.035758] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled

<7> [130.035891] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected

<7> [130.035900] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1]

<7> [130.035905] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-1]

<7> [130.036156] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1] disconnected

<7> [130.036161] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2]

<7> [130.036163] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:536:DP-2]

<7> [130.057237] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.078444] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.082346] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A

<7> [130.082510] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A

<7> [130.082641] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A

<7> [130.082760] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A

<7> [130.082876] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B

<7> [130.083019] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B

<7> [130.083136] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B

<7> [130.083254] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B

<7> [130.083367] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C

<7> [130.083476] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C

<7> [130.083587] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C

<7> [130.083703] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C

<7> [130.083816] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D

<7> [130.083937] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D

<7> [130.084048] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D

<7> [130.084155] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D

<7> [130.084262] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E

<7> [130.084375] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E

<7> [130.084489] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E

<7> [130.084599] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E

<7> [130.084707] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F

<7> [130.084825] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F

<7> [130.084948] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F

<7> [130.085056] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F

<7> [130.085161] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G

<7> [130.085266] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G

<7> [130.085375] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G

<7> [130.085492] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G

<7> [130.085601] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H

<7> [130.085709] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H

<7> [130.085824] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H

<7> [130.086073] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H

<7> [130.086188] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I

<7> [130.086298] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I

<7> [130.086408] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I

<7> [130.086525] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I

<6> [130.094358] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6

<6> [130.096255] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7

<6> [130.097616] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8

<6> [130.098558] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9

<7> [130.099681] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.120767] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.141958] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.163071] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.184112] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.205134] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.226144] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.247133] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.268134] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.289127] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.310114] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.331109] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.352108] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.373098] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.394092] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.415093] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.436094] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.457122] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.478124] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.499112] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.520111] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.541101] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.562479] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.583486] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.604480] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.625470] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.646476] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.667469] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.688451] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.709431] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [130.709575] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110

<7> [130.709606] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2] disconnected

<7> [130.709616] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3]

<7> [130.709620] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:545:DP-3]

<7> [130.709800] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3] disconnected

<7> [130.709803] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4]

<7> [130.709806] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:554:DP-4]

<7> [130.709989] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4] disconnected

<7> [130.709997] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] enabled? yes

<7> [130.710003] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:517:HDMI-A-1] enabled? no

<7> [130.710008] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-1] enabled? no

<7> [130.710012] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:536:DP-2] enabled? no

<7> [130.710016] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:545:DP-3] enabled? no

<7> [130.710020] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:554:DP-4] enabled? no

<7> [130.710274] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [130.710308] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] found preferred mode: 3840x2160

<7> [130.710312] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [130.710329] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 3840x2160 set (0,0)

<7> [130.710466] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [130.710480] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one

<6> [130.710608] xe 0000:00:02.0: [drm] Allocating fbdev: Stolen memory not preferred.

<7> [130.721463] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 3840x2160 fb

<7> [130.723783] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:508:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [130.724074] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:507:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 538600 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [130.724216] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 HDR no link rate required 2019750 available 2160000

<7> [130.724356] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [130.724488] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:507:DDI A/PHY A] [CRTC:151:pipe A]

<7> [130.724618] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dpll_hw_state

<7> [130.724739] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:

<7> [130.724855] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] dpll_hw_state: cfgcr0: 0x1c2, cfgcr1: 0x84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [130.724988] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:

<7> [130.725155] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] dpll_hw_state: cfgcr0: 0xe001a5, cfgcr1: 0x48, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [130.725325] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)

<7> [130.725451] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000)

<7> [130.725565] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1)

<7> [130.725676] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [130.725793] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0

<7> [130.725968] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027

<7> [130.726106] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [130.726269] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0

<7> [130.726381] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201

<7> [130.726484] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207

<7> [130.726581] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.726673] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.726762] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.726851] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.726951] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.727082] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.727185] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.727282] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.727373] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.727463] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.727550] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.727645] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.727737] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.727826] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.727915] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.728024] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.728134] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [130.728229] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.728316] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.728409] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [130.728521] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 2154400 num active planes 1

<7> [130.728654] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 11064 required 2155

<7> [130.728780] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 13813 required 2155

<7> [130.728902] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 14899 required 2155

<7> [130.729032] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 13010 required 2155

<7> [130.729159] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] PSF GV point 0: max bw 34133 required 2155

<7> [130.729267] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] PSF GV point 1: max bw 51200 required 2155

<7> [130.729381] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] PSF GV point 2: max bw 51200 required 2155

<7> [130.729512] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated DPLL 0

<7> [130.729638] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0

<7> [130.729760] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]

<7> [130.729885] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [130.730014] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [130.730152] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [130.730275] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [130.730387] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [130.730496] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [130.730602] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 7843931, data_n: 8388608, link_m: 522928, link_n: 524288, tu: 64

<7> [130.730708] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [130.730813] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled

<7> [130.730919] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [130.731041] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [130.731165] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0

<7> [130.731276] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [130.731385] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [130.731490] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [130.731593] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [130.731701] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [130.731806] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [130.731909] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [130.732039] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [130.732167] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 1

<7> [130.732278] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 2244, vmax: 2244, flipline: 2244, pipeline full: 0, guardband: 82 vsync start: 81, vsync end: 76

<7> [130.732385] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 2162, vmax vblank: 2162, vmin vtotal: 2244, vmax vtotal: 2244

<7> [130.732492] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [130.732602] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa

<7> [130.732708] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa

<7> [130.732811] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2161-2244 vs=2163-2168 vt=2244, flags=0xa

<7> [130.732919] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa

<7> [130.733043] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2161-2244 vs=2163-2168 vt=2244, flags=0xa

<7> [130.733168] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 540000, pixel rate 538600, min cdclk 269300, min voltage level 0

<7> [130.733271] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 60, ips linetime: 0

<7> [130.733372] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [130.733473] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 3840x2160+0+0

<7> [130.733573] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [130.733672] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [130.733771] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [130.733869] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: cfgcr0: 0xe001a5, cfgcr1: 0x48, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [130.734005] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [130.734165] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [130.734313] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [130.734424] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [130.734530] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [130.734640] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [130.734752] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [130.734877] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [130.735050] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [130.735177] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [130.735283] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [130.735386] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [130.735488] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:509] 3840x2160 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [130.735592] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [130.735700] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 3840.000000x2160.000000+0.000000+0.000000 dst: 3840x2160+0+0

<7> [130.735844] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [130.736020] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [130.736137] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [130.736246] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [130.736350] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [130.737035] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [130.939367] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:508:eDP-1] set backlight PWM = 0

<7> [130.940984] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [130.945404] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000

<7> [130.945522] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power off

<7> [130.945983] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:507:DDI A/PHY A] - short

<7> [130.946808] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [130.947386] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [131.001842] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010

<7> [131.002514] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:507:DDI A/PHY A] - long

<7> [131.003112] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [131.005325] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [131.006121] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DDI_IO_A

<7> [131.006750] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:507:DDI A/PHY A]

<7> [131.006846] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]

<7> [131.008625] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]

<7> [131.009533] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [131.009976] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [131.010769] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI A/PHY A]

<7> [131.011256] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:516:DDI B/PHY B]

<7> [131.011590] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC1/PHY TC1]

<7> [131.011887] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A]

<7> [131.012270] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B]

<7> [131.012643] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C]

<7> [131.013038] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D]

<7> [131.013349] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:535:DDI TC2/PHY TC2]

<7> [131.013633] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DP-MST A]

<7> [131.013903] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DP-MST B]

<7> [131.014199] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:539:DP-MST C]

<7> [131.014463] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DP-MST D]

<7> [131.014718] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DDI TC3/PHY TC3]

<7> [131.014982] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST A]

<7> [131.015251] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST B]

<7> [131.015518] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:548:DP-MST C]

<7> [131.015769] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:549:DP-MST D]

<7> [131.016035] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:553:DDI TC4/PHY TC4]

<7> [131.016278] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:555:DP-MST A]

<7> [131.016508] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:556:DP-MST B]

<7> [131.016748] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:557:DP-MST C]

<7> [131.016991] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:558:DP-MST D]

<7> [131.017325] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [131.017948] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]

<7> [131.018208] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [131.018469] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power on

<7> [131.018623] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power cycle (488 ms remaining)

<7> [131.060846] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [131.515404] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [131.567421] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [131.568272] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power on

<7> [131.568908] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063

<7> [131.630590] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010

<7> [131.631295] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:507:DDI A/PHY A] - long

<7> [131.631891] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20

<7> [131.633411] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]

<7> [131.764484] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [131.764620] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [131.764716] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_USBC2

<7> [131.765984] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4

<7> [131.781193] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [131.781856] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DDI_IO_A

<7> [131.782700] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:507:DDI A/PHY A] PPS 0 turning VDD on

<7> [131.783374] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:507:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b

<7> [131.785402] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 44 41 00 00 01 c0 02 00 02 00 00 0b 80

<7> [131.785455] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [131.786317] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 06

<7> [131.787482] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [131.787902] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [131.788992] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Clock recovery OK

<7> [131.789326] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS3

<7> [131.790764] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [131.791103] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [131.791748] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [131.792531] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A

<7> [131.792824] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:508:eDP-1] Performing OUI wait (0 ms)

<7> [131.793747] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:508:eDP-1] set backlight PWM = 6844

<7> [131.826085] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [131.829644] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:508:eDP-1]

<7> [131.830252] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]

<7> [131.830801] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp

<7> [131.831396] xe 0000:00:02.0: [drm:icl_sagv_post_plane_update [xe]] Relaxing QGV points: 0x10b -> 0x0

<6> [131.833628] Console: switching to colour frame buffer device 240x67

<6> [131.884383] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device

<7> [131.884501] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 13

<7> [131.885102] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: D0

<7> [131.885534] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no

<7> [131.885787] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes

<7> [131.886034] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: no

<7> [131.886247] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes

<7> [131.886461] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes

<7> [131.886752] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes

<7> [131.887035] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes

<7> [131.887221] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no

<7> [131.887395] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes

<7> [131.887560] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no

<7> [131.887716] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes

<7> [131.887964] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no

<7> [131.888151] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes

<7> [131.888299] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no

<7> [131.888440] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no

<7> [131.888571] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no

<7> [131.888706] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes

<7> [131.888885] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes

<7> [131.889049] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes

<7> [131.889173] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 19200 kHz

<7> [131.889714] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device

<7> [131.889838] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D

<7> [131.889995] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C

<7> [131.890116] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [131.890233] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<5> [131.895616] xe 0000:00:02.0: [drm] PF: migration missing prerequisite: requires GuC version >= 70.54.0

<7> [131.896313] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no

<7> [131.909812] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]

<7> [131.909835] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1]

<7> [131.911110] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [131.911815] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [131.912188] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [131.912597] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000

<7> [131.913217] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [131.913230] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [131.913240] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor

<7> [131.913264] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0

<7> [131.913325] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no

<7> [131.913643] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [131.914233] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [131.915341] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:

<7> [131.915370] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa

<7> [131.915381] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa

<7> [131.915392] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]

<7> [131.915402] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]

<7> [131.919757] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected

<7> [131.919767] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1]

<7> [131.919773] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-1]

<7> [131.920090] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [131.920321] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1] disconnected

<7> [131.920328] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2]

<7> [131.920333] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:536:DP-2]

<7> [131.920568] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [131.920770] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_USBC2

<7> [131.921169] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4

<7> [131.942275] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [131.963300] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [131.984313] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.005322] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.026328] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.047335] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.068341] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.089350] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.110361] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.131367] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.152373] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.173380] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.194384] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.215389] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.236395] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.257403] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.278411] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.299414] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.320417] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.341420] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.362424] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.383427] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.404429] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.425434] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.446438] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.467441] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.488444] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.509447] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.530451] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.551453] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.572456] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.593461] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.593608] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110

<7> [132.593654] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2] disconnected

<7> [132.593664] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3]

<7> [132.593669] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:545:DP-3]

<7> [132.593867] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [132.594029] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3] disconnected

<7> [132.594033] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4]

<7> [132.594037] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:554:DP-4]

<7> [132.594234] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [132.594386] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4] disconnected

<7> [132.594390] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] enabled? yes

<7> [132.594394] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:517:HDMI-A-1] enabled? no

<7> [132.594397] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-1] enabled? no

<7> [132.594400] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:536:DP-2] enabled? no

<7> [132.594403] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:545:DP-3] enabled? no

<7> [132.594405] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:554:DP-4] enabled? no

<7> [132.594636] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [132.594667] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] found preferred mode: 3840x2160

<7> [132.594670] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config

<7> [132.594712] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 3840x2160 set (0,0)

<7> [132.616109] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [132.633318] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]

<7> [132.633331] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1]

<7> [132.633902] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [132.634643] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000

<7> [132.634785] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [132.635136] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000

<7> [132.635734] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [132.635748] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [132.635758] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor

<7> [132.635777] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0

<7> [132.635830] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no

<7> [132.636422] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [132.636525] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [132.637620] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:

<7> [132.637665] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa

<7> [132.637676] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa

<7> [132.637687] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]

<7> [132.637698] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]

<7> [132.642215] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected

<7> [132.642222] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1]

<7> [132.642226] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-1]

<7> [132.642416] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1] disconnected

<7> [132.642421] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2]

<7> [132.642424] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:536:DP-2]

<7> [132.663511] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.684692] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.705674] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.726642] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.747604] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.768561] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.789517] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.810471] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.831430] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.852386] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.873341] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.894294] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.915255] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.936215] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.957170] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.978130] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [132.999090] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [133.020047] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [133.041002] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [133.061964] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [133.082921] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [133.104181] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [133.125149] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [133.146110] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [133.167074] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [133.188041] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [133.209004] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [133.229961] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [133.250916] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [133.271932] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [133.292897] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [133.313888] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)

<7> [133.314028] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110

<7> [133.314066] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2] disconnected

<7> [133.314076] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3]

<7> [133.314080] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:545:DP-3]

<7> [133.314237] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3] disconnected

<7> [133.314241] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4]

<7> [133.314244] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:554:DP-4]

<7> [133.314392] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4] disconnected

<7> [133.314395] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] enabled? yes

<7> [133.314403] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:517:HDMI-A-1] enabled? no

<7> [133.314405] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-1] enabled? no

<7> [133.314407] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:536:DP-2] enabled? no

<7> [133.314409] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:545:DP-3] enabled? no

<7> [133.314410] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:554:DP-4] enabled? no

<7> [133.314633] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [133.314659] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] found preferred mode: 3840x2160

<7> [133.314661] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config

<7> [133.314688] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 3840x2160 set (0,0)

<7> [133.335174] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [133.402248] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<6> [133.402415] [IGT] xe_module_load: finished subtest load, SUCCESS

Results for igt@xe_module_load@load