Result:
i915_display_info2 igt_runner2 results2.json results2-xe-load.json guc_logs2.tar i915_display_info_post_exec2 serial_data2 boot2 dmesg2
| Detail | Value |
|---|---|
| Duration | 3.62 seconds |
| Hostname |
shard-lnl-1 |
| Igt-Version |
IGT-Version: 2.4-ge68d82b44 (x86_64) (Linux: 7.1.0-rc3-lgci-xe-xe-5060-e54a14bbf920aa5ee-debug+ x86_64) |
| Out |
Using IGT_SRANDOM=1778787697 for randomisation Opened device: /dev/dri/card0 DMC: fw loaded: yes Starting subtest: dc6-psr Stack trace: #0 ../lib/igt_core.c:2074 __igt_fail_assert() #1 [check_dc_counter.part.0+0x63] #2 ../tests/intel/kms_pm_dc.c:362 test_dc_state_psr() #3 ../tests/intel/kms_pm_dc.c:682 __igt_unique____real_main636() #4 [main+0x2d] #5 [__libc_init_first+0x8a] #6 [__libc_start_main+0x8b] #7 [_start+0x25] Subtest dc6-psr: FAIL (3.622s) |
| Err |
Starting subtest: dc6-psr [114.381869] (kms_pm_dc:3395) CRITICAL: Test assertion failure function check_dc_counter, file ../tests/intel/kms_pm_dc.c:262: [114.382001] (kms_pm_dc:3395) CRITICAL: Failed assertion: igt_dc_state_wait_entry(data->debugfs_fd, dc_flag, prev_dc_count) [114.382046] (kms_pm_dc:3395) CRITICAL: DC6 state is not achieved i915_power_domain_info: Runtime power status: enabled Power well/domain Use count always-on 5 DISPLAY_CORE 1 PIPE_A 1 PIPE_B 0 PIPE_C 0 PIPE_D 0 PIPE_PANEL_FITTER_A 0 PIPE_PANEL_FITTER_B 0 PIPE_PANEL_FITTER_C 0 PIPE_PANEL_FITTER_D 0 TRANSCODER_A 1 TRANSCODER_B 0 TRANSCODER_C 0 TRANSCODER_D 0 TRANSCODER_EDP 0 TRANSCODER_DSI_A 0 TRANSCODER_DSI_C 0 TRANSCODER_VDSC_PW2 0 PORT_DDI_LANES_A 1 PORT_DDI_LANES_B 0 PORT_DDI_LANES_C 0 PORT_DDI_LANES_D 0 PORT_DDI_LANES_E 0 PORT_DDI_LANES_F 0 PORT_DDI_LANES_TC1 0 PORT_DDI_LANES_TC2 0 PORT_DDI_LANES_TC3 0 PORT_DDI_LANES_TC4 0 PORT_DDI_LANES_TC5 0 PORT_DDI_LANES_TC6 0 PORT_DDI_IO_A 0 PORT_DDI_IO_B 0 PORT_DDI_IO_C 0 PORT_DDI_IO_D 0 PORT_DDI_IO_E 0 PORT_DDI_IO_F 0 PORT_DDI_IO_TC1 0 PORT_DDI_IO_TC2 0 PORT_DDI_IO_TC3 0 PORT_DDI_IO_TC4 0 PORT_DDI_IO_TC5 0 PORT_DDI_IO_TC6 0 PORT_DSI 0 PORT_CRT 0 PORT_OTHER 0 VGA 0 AUDIO_MMIO 0 AUDIO_PLAYBACK 0 AUX_IO_A 1 AUX_IO_B 0 AUX_IO_C 0 AUX_IO_D 0 AUX_IO_E 0 AUX_IO_F 0 AUX_A 0 AUX_B 0 AUX_C 0 AUX_D 0 AUX_E 0 AUX_F 0 AUX_USBC1 0 AUX_USBC2 0 AUX_USBC3 0 AUX_USBC4 0 AUX_USBC5 0 AUX_USBC6 0 AUX_TBT1 0 AUX_TBT2 0 AUX_TBT3 0 AUX_TBT4 0 AUX_TBT5 0 AUX_TBT6 0 GMBUS 0 GT_IRQ 0 DC_OFF 0 TC_COLD_OFF 0 INIT 0 PW_1 0 DC_off 0 PIPE_C 0 PIPE_D 0 PIPE_PANEL_FITTER_C 0 PIPE_PANEL_FITTER_D 0 TRANSCODER_C 0 TRANSCODER_D 0 AUDIO_MMIO 0 DC_OFF 0 INIT 0 PW_2 0 PIPE_B 0 PIPE_C 0 PIPE_D 0 PIPE_PANEL_FITTER_B 0 PIPE_PANEL_FITTER_C 0 PIPE_PANEL_FITTER_D 0 TRANSCODER_B 0 TRANSCODER_C 0 TRANSCODER_D 0 PORT_DDI_LANES_TC1 0 PORT_DDI_LANES_TC2 0 PORT_DDI_LANES_TC3 0 PORT_DDI_LANES_TC4 0 VGA 0 AUDIO_PLAYBACK 0 INIT 0 PW_A 1 PIPE_A 1 PIPE_PANEL_FITTER_A 0 INIT 0 PW_B 0 PIPE_B 0 PIPE_PANEL_FITTER_B 0 TRANSCODER_B 0 INIT 0 PW_C 0 PIPE_C 0 PIPE_PANEL_FITTER_C 0 TRANSCODER_C 0 INIT 0 PW_D 0 PIPE_D 0 PIPE_PANEL_FITTER_D 0 TRANSCODER_D 0 INIT 0 PICA_TC 0 PORT_DDI_LANES_TC1 0 PORT_DDI_LANES_TC2 0 PORT_DDI_LANES_TC3 0 PORT_DDI_LANES_TC4 0 AUX_USBC1 0 AUX_USBC2 0 AUX_USBC3 0 AUX_USBC4 0 AUX_TBT1 0 AUX_TBT2 0 AUX_TBT3 0 AUX_TBT4 0 INIT 0 AUX_A 1 AUX_IO_A 1 AUX_A 0 AUX_B 0 AUX_IO_B 0 AUX_B 0 AUX_TC1 0 AUX_USBC1 0 AUX_TBT1 0 AUX_TC2 0 AUX_USBC2 0 AUX_TBT2 0 AUX_TC3 0 AUX_USBC3 0 AUX_TBT3 0 AUX_TC4 0 AUX_USBC4 0 AUX_TBT4 0 Subtest dc6-psr failed. **** DEBUG **** [111.008883] (kms_pm_dc:3395) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) [111.009678] (kms_pm_dc:3395) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < crtc->n_planes [111.009680] (kms_pm_dc:3395) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 [111.009768] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetCrtc pipe B, disabling [111.009952] (kms_pm_dc:3395) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < crtc->n_planes [111.009953] (kms_pm_dc:3395) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 1 [111.010039] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetPlane pipe B, plane 1, disabling [111.010173] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane B.1 "rotation" to 0x1/1 [111.010263] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane B.1 "pixel blend mode" to 0x0/0 [111.010350] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane B.1 "alpha" to 0xffff/65535 [111.010435] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane B.1 "FB_DAMAGE_CLIPS" to 0x0/0 [111.010515] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane B.1 "SCALING_FILTER" to 0x0/0 [111.010596] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane B.1 "COLOR_PIPELINE" to 0x0/0 [111.010684] (kms_pm_dc:3395) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < crtc->n_planes [111.010685] (kms_pm_dc:3395) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 2 [111.010770] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetPlane pipe B, plane 2, disabling [111.010876] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane B.2 "rotation" to 0x1/1 [111.010967] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane B.2 "pixel blend mode" to 0x0/0 [111.011068] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane B.2 "alpha" to 0xffff/65535 [111.011146] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane B.2 "FB_DAMAGE_CLIPS" to 0x0/0 [111.011224] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane B.2 "SCALING_FILTER" to 0x0/0 [111.011302] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane B.2 "COLOR_PIPELINE" to 0x0/0 [111.011377] (kms_pm_dc:3395) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < crtc->n_planes [111.011406] (kms_pm_dc:3395) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 3 [111.011495] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetPlane pipe B, plane 3, disabling [111.011588] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane B.3 "rotation" to 0x1/1 [111.011674] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane B.3 "pixel blend mode" to 0x0/0 [111.011755] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane B.3 "alpha" to 0xffff/65535 [111.011830] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane B.3 "FB_DAMAGE_CLIPS" to 0x0/0 [111.011905] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane B.3 "SCALING_FILTER" to 0x0/0 [111.011983] (kms_pm_dc:3395) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < crtc->n_planes [111.011984] (kms_pm_dc:3395) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 4 [111.012079] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetPlane pipe B, plane 4, disabling [111.012177] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane B.4 "rotation" to 0x1/1 [111.012258] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane B.4 "pixel blend mode" to 0x0/0 [111.012339] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane B.4 "alpha" to 0xffff/65535 [111.012420] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane B.4 "FB_DAMAGE_CLIPS" to 0x0/0 [111.012502] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane B.4 "SCALING_FILTER" to 0x0/0 [111.012582] (kms_pm_dc:3395) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < crtc->n_planes [111.012584] (kms_pm_dc:3395) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 5 [111.012664] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetCursor pipe B, disabling [111.012748] (kms_pm_dc:3395) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) [111.013514] (kms_pm_dc:3395) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < crtc->n_planes [111.013515] (kms_pm_dc:3395) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 [111.013603] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetCrtc pipe C, disabling [111.013773] (kms_pm_dc:3395) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < crtc->n_planes [111.013774] (kms_pm_dc:3395) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 1 [111.013858] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetPlane pipe C, plane 1, disabling [111.013957] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane C.1 "rotation" to 0x1/1 [111.014041] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane C.1 "pixel blend mode" to 0x0/0 [111.014149] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane C.1 "alpha" to 0xffff/65535 [111.014246] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane C.1 "FB_DAMAGE_CLIPS" to 0x0/0 [111.014333] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane C.1 "SCALING_FILTER" to 0x0/0 [111.014413] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane C.1 "COLOR_PIPELINE" to 0x0/0 [111.014495] (kms_pm_dc:3395) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < crtc->n_planes [111.014496] (kms_pm_dc:3395) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 2 [111.014581] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetPlane pipe C, plane 2, disabling [111.014680] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane C.2 "rotation" to 0x1/1 [111.014766] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane C.2 "pixel blend mode" to 0x0/0 [111.014863] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane C.2 "alpha" to 0xffff/65535 [111.014978] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane C.2 "FB_DAMAGE_CLIPS" to 0x0/0 [111.015133] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane C.2 "SCALING_FILTER" to 0x0/0 [111.015215] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane C.2 "COLOR_PIPELINE" to 0x0/0 [111.015299] (kms_pm_dc:3395) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < crtc->n_planes [111.015300] (kms_pm_dc:3395) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 3 [111.015383] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetPlane pipe C, plane 3, disabling [111.015486] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane C.3 "rotation" to 0x1/1 [111.015574] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane C.3 "pixel blend mode" to 0x0/0 [111.015658] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane C.3 "alpha" to 0xffff/65535 [111.015744] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane C.3 "FB_DAMAGE_CLIPS" to 0x0/0 [111.015836] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane C.3 "SCALING_FILTER" to 0x0/0 [111.015941] (kms_pm_dc:3395) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < crtc->n_planes [111.015943] (kms_pm_dc:3395) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 4 [111.016040] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetPlane pipe C, plane 4, disabling [111.016330] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane C.4 "rotation" to 0x1/1 [111.016412] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane C.4 "pixel blend mode" to 0x0/0 [111.016493] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane C.4 "alpha" to 0xffff/65535 [111.016574] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane C.4 "FB_DAMAGE_CLIPS" to 0x0/0 [111.016655] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetProp plane C.4 "SCALING_FILTER" to 0x0/0 [111.016736] (kms_pm_dc:3395) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < crtc->n_planes [111.016737] (kms_pm_dc:3395) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 5 [111.016823] (kms_pm_dc:3395) igt_kms-DEBUG: display: SetCursor pipe C, disabling [111.016908] (kms_pm_dc:3395) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) [111.040052] (kms_pm_dc:3395) igt_kms-DEBUG: display: } [111.040750] (kms_pm_dc:3395) DEBUG: Test requirement passed: !psr_disabled_check(data->debugfs_fd) [111.040858] (kms_pm_dc:3395) igt_psr-DEBUG: Test requirement passed: !(strstr(buf, "PSR sink not reliable: yes")) [111.040860] (kms_pm_dc:3395) igt_psr-DEBUG: Test requirement passed: !(strstr(buf, "PSR setup timing not met")) [111.061083] (kms_pm_dc:3395) igt_psr-DEBUG: Test requirement passed: !(strstr(buf, "PSR sink not reliable: yes")) [111.061085] (kms_pm_dc:3395) igt_psr-DEBUG: Test requirement passed: !(strstr(buf, "PSR setup timing not met")) [111.081244] (kms_pm_dc:3395) igt_psr-DEBUG: Test requirement passed: !(strstr(buf, "PSR sink not reliable: yes")) [111.081246] (kms_pm_dc:3395) igt_psr-DEBUG: Test requirement passed: !(strstr(buf, "PSR setup timing not met")) [111.101411] (kms_pm_dc:3395) igt_psr-DEBUG: Test requirement passed: !(strstr(buf, "PSR sink not reliable: yes")) [111.101441] (kms_pm_dc:3395) igt_psr-DEBUG: Test requirement passed: !(strstr(buf, "PSR setup timing not met")) [111.121918] (kms_pm_dc:3395) igt_psr-DEBUG: Test requirement passed: !(strstr(buf, "PSR sink not reliable: yes")) [111.121932] (kms_pm_dc:3395) igt_psr-DEBUG: Test requirement passed: !(strstr(buf, "PSR setup timing not met")) [111.142462] (kms_pm_dc:3395) igt_psr-DEBUG: Test requirement passed: !(strstr(buf, "PSR sink not reliable: yes")) [111.142477] (kms_pm_dc:3395) igt_psr-DEBUG: Test requirement passed: !(strstr(buf, "PSR setup timing not met")) [111.163029] (kms_pm_dc:3395) igt_psr-DEBUG: Test requirement passed: !(strstr(buf, "PSR sink not reliable: yes")) [111.163046] (kms_pm_dc:3395) igt_psr-DEBUG: Test requirement passed: !(strstr(buf, "PSR setup timing not met")) [111.163100] (kms_pm_dc:3395) igt_psr-DEBUG: psr_active_check(debugfs_fd, mode, output) took 116ms [114.381869] (kms_pm_dc:3395) CRITICAL: Test assertion failure function check_dc_counter, file ../tests/intel/kms_pm_dc.c:262: [114.382001] (kms_pm_dc:3395) CRITICAL: Failed assertion: igt_dc_state_wait_entry(data->debugfs_fd, dc_flag, prev_dc_count) [114.382046] (kms_pm_dc:3395) CRITICAL: DC6 state is not achieved i915_power_domain_info: Runtime power status: enabled Power well/domain Use count always-on 5 DISPLAY_CORE 1 PIPE_A 1 PIPE_B 0 PIPE_C 0 PIPE_D 0 PIPE_PANEL_FITTER_A 0 PIPE_PANEL_FITTER_B 0 PIPE_PANEL_FITTER_C 0 PIPE_PANEL_FITTER_D 0 TRANSCODER_A 1 TRANSCODER_B 0 TRANSCODER_C 0 TRANSCODER_D 0 TRANSCODER_EDP 0 TRANSCODER_DSI_A 0 TRANSCODER_DSI_C 0 TRANSCODER_VDSC_PW2 0 PORT_DDI_LANES_A 1 PORT_DDI_LANES_B 0 PORT_DDI_LANES_C 0 PORT_DDI_LANES_D 0 PORT_DDI_LANES_E 0 PORT_DDI_LANES_F 0 PORT_DDI_LANES_TC1 0 PORT_DDI_LANES_TC2 0 PORT_DDI_LANES_TC3 0 PORT_DDI_LANES_TC4 0 PORT_DDI_LANES_TC5 0 PORT_DDI_LANES_TC6 0 PORT_DDI_IO_A 0 PORT_DDI_IO_B 0 PORT_DDI_IO_C 0 PORT_DDI_IO_D 0 PORT_DDI_IO_E 0 PORT_DDI_IO_F 0 PORT_DDI_IO_TC1 0 PORT_DDI_IO_TC2 0 PORT_DDI_IO_TC3 0 PORT_DDI_IO_TC4 0 PORT_DDI_IO_TC5 0 PORT_DDI_IO_TC6 0 PORT_DSI 0 PORT_CRT 0 PORT_OTHER 0 VGA 0 AUDIO_MMIO 0 AUDIO_PLAYBACK 0 AUX_IO_A 1 AUX_IO_B 0 AUX_IO_C 0 AUX_IO_D 0 AUX_IO_E 0 AUX_IO_F 0 AUX_A 0 AUX_B 0 AUX_C 0 AUX_D 0 AUX_E 0 AUX_F 0 AUX_USBC1 0 AUX_USBC2 0 AUX_USBC3 0 AUX_USBC4 0 AUX_USBC5 0 AUX_USBC6 0 AUX_TBT1 0 AUX_TBT2 0 AUX_TBT3 0 AUX_TBT4 0 AUX_TBT5 0 AUX_TBT6 0 GMBUS 0 GT_IRQ 0 DC_OFF 0 TC_COLD_OFF 0 INIT 0 PW_1 0 DC_off 0 PIPE_C 0 PIPE_D 0 PIPE_PANEL_FITTER_C 0 PIPE_PANEL_FITTER_D 0 TRANSCODER_C 0 TRANSCODER_D 0 AUDIO_MMIO 0 DC_OFF 0 INIT 0 PW_2 0 PIPE_B 0 PIPE_C 0 PIPE_D 0 PIPE_PANEL_FITTER_B 0 PIPE_PANEL_FITTER_C 0 PIPE_PANEL_FITTER_D 0 TRANSCODER_B 0 TRANSCODER_C 0 TRANSCODER_D 0 PORT_DDI_LANES_TC1 0 PORT_DDI_LANES_TC2 0 PORT_DDI_LANES_TC3 0 PORT_DDI_LANES_TC4 0 VGA 0 AUDIO_PLAYBACK 0 INIT 0 PW_A 1 PIPE_A 1 PIPE_PANEL_FITTER_A 0 INIT 0 PW_B 0 PIPE_B 0 PIPE_PANEL_FITTER_B 0 TRANSCODER_B 0 INIT 0 PW_C 0 PIPE_C 0 PIPE_PANEL_FITTER_C 0 TRANSCODER_C 0 INIT 0 PW_D 0 PIPE_D 0 PIPE_PANEL_FITTER_D 0 TRANSCODER_D 0 INIT 0 PICA_TC 0 PORT_DDI_LANES_TC1 0 PORT_DDI_LANES_TC2 0 PORT_DDI_LANES_TC3 0 PORT_DDI_LANES_TC4 0 AUX_USBC1 0 AUX_USBC2 0 AUX_USBC3 0 AUX_USBC4 0 AUX_TBT1 0 AUX_TBT2 0 AUX_TBT3 0 AUX_TBT4 0 INIT 0 AUX_A 1 AUX_IO_A 1 AUX_A 0 AUX_B 0 AUX_IO_B 0 AUX_B 0 AUX_TC1 0 AUX_USBC1 0 AUX_TBT1 0 AUX_TC2 0 AUX_USBC2 0 AUX_TBT2 0 AUX_TC3 0 AUX_USBC3 0 AUX_TBT3 0 AUX_TC4 0 AUX_USBC4 0 AUX_TBT4 0 [114.397910] (kms_pm_dc:3395) igt_core-INFO: Stack trace: [114.412203] (kms_pm_dc:3395) igt_core-INFO: #0 ../lib/igt_core.c:2074 __igt_fail_assert() [114.413429] (kms_pm_dc:3395) igt_core-INFO: #1 [check_dc_counter.part.0+0x63] [114.413472] (kms_pm_dc:3395) igt_core-INFO: #2 ../tests/intel/kms_pm_dc.c:362 test_dc_state_psr() [114.413509] (kms_pm_dc:3395) igt_core-INFO: #3 ../tests/intel/kms_pm_dc.c:682 __igt_unique____real_main636() [114.413835] (kms_pm_dc:3395) igt_core-INFO: #4 [main+0x2d] [114.416817] (kms_pm_dc:3395) igt_core-INFO: #5 [__libc_init_first+0x8a] [114.417603] (kms_pm_dc:3395) igt_core-INFO: #6 [__libc_start_main+0x8b] [114.417790] (kms_pm_dc:3395) igt_core-INFO: #7 [_start+0x25] **** END **** Subtest dc6-psr: FAIL (3.622s) |
| Dmesg |
<6> [111.486146] Console: switching to colour dummy device 80x25
<6> [111.486349] [IGT] kms_pm_dc: executing
<7> [112.156108] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD off
<7> [112.156696] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
<7> [112.505297] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1]
<7> [112.505320] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1]
<7> [112.505644] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [112.505851] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected
<7> [112.506410] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2]
<7> [112.506418] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2]
<7> [112.506655] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [112.506825] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] disconnected
<7> [112.507256] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3]
<7> [112.507262] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3]
<7> [112.507464] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [112.507613] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] disconnected
<7> [112.507993] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1]
<7> [112.507999] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:393:eDP-1]
<7> [112.508168] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on
<7> [112.508324] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7> [112.508815] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [112.509218] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [112.509346] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [112.509468] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [112.509619] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5> [112.509627] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [112.509629] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [112.509631] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] DisplayID extension version 0x13, primary use 0x00
<7> [112.509635] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5> [112.509638] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [112.509640] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD monitor
<5> [112.509644] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [112.509645] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD size 20, SAD count 0
<5> [112.509649] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [112.509664] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] VRR capable: yes
<7> [112.509780] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [112.509893] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5> [112.510262] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [112.510265] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [112.510267] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [112.510323] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] probed modes:
<7> [112.510327] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [112.510331] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [112.510345] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1]
<7> [112.510349] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1]
<7> [112.510509] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected
<7> [112.510521] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2]
<7> [112.510524] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2]
<7> [112.510666] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] disconnected
<7> [112.510676] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3]
<7> [112.510678] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3]
<7> [112.510805] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] disconnected
<6> [112.512122] [IGT] kms_pm_dc: starting subtest dc6-psr
<7> [112.512409] xe 0000:00:02.0: [drm:i915_edp_psr_debug_set [xe]] Setting PSR debug to f
<7> [112.512517] xe 0000:00:02.0: [drm:intel_psr_debug_set [xe]] Invalid debug mask f
<7> [112.512621] xe 0000:00:02.0: [drm:i915_edp_psr_debug_set [xe]] Setting PSR debug to 43
<7> [112.512810] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [112.512911] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [112.513035] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000
<7> [112.513148] xe 0000:00:02.0: [drm:intel_psr_compute_config [xe]] Selective update disabled by flag
<7> [112.513250] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [112.513365] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A]
<7> [112.513542] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [fastset]
<7> [112.513673] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [112.513781] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [112.513873] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [112.513988] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [112.514102] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [112.514214] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [112.514319] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [112.514409] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [112.514495] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [112.514577] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [112.514662] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [112.514752] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0
<7> [112.514840] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [112.514934] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 2, length 8
<7> [112.515036] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [112.515141] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [112.515245] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [112.515336] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [112.515423] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [112.515509] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [112.515594] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [112.515693] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [112.515796] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [112.515896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [112.516011] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [112.516113] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [112.516212] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [112.516313] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [112.516398] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [112.516481] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 173855, min voltage level 0
<7> [112.516562] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [112.516643] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0
<7> [112.516718] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0
<7> [112.516793] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [112.516870] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [112.516955] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [112.517037] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [112.517120] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no,
<7> [112.517203] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [112.517286] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [112.517363] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [112.517441] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [112.517519] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [112.517596] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [112.517673] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [112.517750] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [112.517827] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [112.517906] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [112.518009] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [112.518093] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [112.518177] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [112.518260] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [112.518342] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [112.518419] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [112.518497] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [112.518573] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [112.518648] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [112.518723] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [112.518798] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:394] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [112.518875] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [112.518960] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [112.519076] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [112.519174] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [112.519319] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2
<7> [112.520505] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 44236800 bytes of contiguous stolen space for FBC, limit: 1
<7> [112.520600] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:35:plane 1A]
<7> [112.536283] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [112.537317] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]
<7> [112.537690] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<7> [112.541504] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [112.557982] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [112.558265] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [112.558481] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [112.576169] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [112.576360] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [112.686361] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]
<7> [112.686426] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:393:eDP-1]
<7> [112.723634] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:270:pipe B]
<7> [112.727468] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:389:pipe C]
<7> [112.754126] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe A
<7> [112.771084] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [112.771531] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [112.771865] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [113.564117] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [113.564194] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [113.564298] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [115.100058] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD off
<7> [115.100705] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
<6> [116.134208] [IGT] kms_pm_dc: finished subtest dc6-psr, FAIL
<7> [116.134524] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [116.134763] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:432] is removed
<7> [116.134841] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0
<7> [116.134940] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [116.135017] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [116.135087] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [116.135156] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [116.135250] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [116.135544] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [116.135642] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [116.135735] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [116.135844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [116.135935] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [116.136446] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [116.136546] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [116.136669] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [116.142128] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on
<7> [116.142289] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7> [116.158839] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:35:plane 1A]
<7> [116.177874] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051
<7> [116.178164] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [116.178408] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [116.178640] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [116.178965] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [116.179224] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 1390840 num active planes 1
<7> [116.179605] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [116.179972] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [116.180289] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [116.180600] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [116.180991] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [116.182119] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 44236800 bytes of contiguous stolen space for FBC, limit: 1
<7> [116.182400] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:35:plane 1A]
<7> [116.192280] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [116.193437] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [116.194507] [IGT] kms_pm_dc: exiting, ret=98
<7> [116.194878] xe 0000:00:02.0: [drm:i915_edp_psr_debug_set [xe]] Setting PSR debug to 0
<7> [116.195277] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [116.195601] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [116.195939] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000
<7> [116.196258] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [116.196661] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A]
<7> [116.197066] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [fastset]
<7> [116.197415] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [116.197714] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [116.198039] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [116.198329] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [116.198614] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [116.198975] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [116.199238] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [116.199520] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [116.199814] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [116.200057] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [116.200300] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [116.200542] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0
<7> [116.200795] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [116.201062] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [116.201314] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [116.201606] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [116.201852] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [116.202101] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [116.202314] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [116.202531] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [116.202740] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [116.202973] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [116.203206] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [116.203413] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [116.203619] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [116.203972] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [116.204150] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [116.204321] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [116.204484] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [116.204670] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 173855, min voltage level 0
<7> [116.204980] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [116.205131] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0
<7> [116.205279] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0
<7> [116.205423] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [116.205564] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [116.205699] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [116.205853] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [116.205988] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no,
<7> [116.206117] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [116.206244] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [116.206368] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [116.206492] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [116.206616] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [116.206737] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [116.206876] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [116.206998] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [116.207113] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [116.207226] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [116.207339] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [116.207447] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [116.207555] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [116.207660] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [116.207765] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [116.207891] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [116.207996] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [116.208095] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [116.208192] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [116.208287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [116.208381] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:394] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [116.208475] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [116.208567] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [116.208685] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [116.225618] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:35:plane 1A]
<7> [116.242197] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [116.243833] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]
<7> [116.244191] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<6> [116.259168] Console: switching to colour frame buffer device 180x56
<7> [116.294016] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [116.294380] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [116.294658] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
|