Results for igt@kms_vrr@seamless-rr-switch-virtual@pipe-a-edp-1

Result: Fail

i915_display_info1 igt_runner1 results1.json results1-xe-load.json guc_logs1.tar i915_display_info_post_exec1 serial_data1 boot1 dmesg1

DetailValue
Duration 6.13 seconds
Hostname 
shard-lnl-2
Igt-Version 
IGT-Version: 2.4-g2e185bca1 (x86_64) (Linux: 7.1.0-rc2-lgci-xe-xe-4984-94d56a898a2db27f8-debug+ x86_64)
Out 
Using IGT_SRANDOM=1777976497 for randomisation
Opened device: /dev/dri/card0
Starting subtest: seamless-rr-switch-virtual
Default Mode:   2880x1800: 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa 
Starting dynamic subtest: pipe-A-eDP-1
Use HIGH_RR Mode as default
  2880x1800: 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa 
Requested rate[0]: 8333333 ns (120.00 Hz), Expected rate between: 8264462 ns (121.00 Hz) to 8403361 ns (119.00 Hz)
Completed 435 flips, 37 were in threshold for [(120 Hz) 8333333ns]
Stack trace:
  #0 ../lib/igt_core.c:2075 __igt_fail_assert()
  #1 ../tests/kms_vrr.c:773 test_seamless_virtual_rr_basic()
  #2 ../tests/kms_vrr.c:998 run_vrr_test.constprop.0()
  #3 ../tests/kms_vrr.c:1105 __igt_unique____real_main1046()
  #4 ../tests/kms_vrr.c:1046 main()
  #5 ../sysdeps/nptl/libc_start_call_main.h:74 __libc_start_call_main()
  #6 ../csu/libc-start.c:128 __libc_start_main@@GLIBC_2.34()
  #7 [_start+0x25]
Dynamic subtest pipe-A-eDP-1: FAIL (6.128s)
Subtest seamless-rr-switch-virtual: FAIL (6.422s)
Err 
Starting subtest: seamless-rr-switch-virtual
Starting dynamic subtest: pipe-A-eDP-1
(kms_vrr:6323) CRITICAL: Test assertion failure function test_seamless_virtual_rr_basic, file ../tests/kms_vrr.c:776:
(kms_vrr:6323) CRITICAL: Failed assertion: result > 75
(kms_vrr:6323) CRITICAL: Refresh rate (120 Hz) 8333333ns: Target threshold not reached, result was 8%
Dynamic subtest pipe-A-eDP-1 failed.
**** DEBUG ****
(kms_vrr:6323) igt_kms-DEBUG: display: A.0: plane_set_fb(432)
(kms_vrr:6323) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_vrr:6323) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_vrr:6323) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_vrr:6323) igt_kms-DEBUG: display: commit {
(kms_vrr:6323) igt_kms-DEBUG: display:     populating plane data: A.0, fb 432
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b0/432
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_ENCODING" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_RANGE" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: display: }
(kms_vrr:6323) igt_kms-DEBUG: display: commit {
(kms_vrr:6323) igt_kms-DEBUG: display:     populating plane data: A.0, fb 432
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b0/432
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_ENCODING" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_RANGE" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: display: }
(kms_vrr:6323) igt_kms-DEBUG: display: commit {
(kms_vrr:6323) igt_kms-DEBUG: display:     populating plane data: A.0, fb 432
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b0/432
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_ENCODING" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_RANGE" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: display: }
(kms_vrr:6323) DEBUG: event_ns - last_event_ns: 17115000 (58.43 Hz)
(kms_vrr:6323) igt_kms-DEBUG: display: A.0: plane_set_fb(433)
(kms_vrr:6323) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_vrr:6323) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_vrr:6323) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_vrr:6323) igt_kms-DEBUG: display: commit {
(kms_vrr:6323) igt_kms-DEBUG: display:     populating plane data: A.0, fb 433
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b1/433
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_ENCODING" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_RANGE" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: display: }
(kms_vrr:6323) igt_kms-DEBUG: display: commit {
(kms_vrr:6323) igt_kms-DEBUG: display:     populating plane data: A.0, fb 433
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b1/433
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_ENCODING" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_RANGE" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: display: }
(kms_vrr:6323) igt_kms-DEBUG: display: commit {
(kms_vrr:6323) igt_kms-DEBUG: display:     populating plane data: A.0, fb 433
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b1/433
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_ENCODING" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_RANGE" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: display: }
(kms_vrr:6323) DEBUG: event_ns - last_event_ns: 17137000 (58.35 Hz)
(kms_vrr:6323) igt_kms-DEBUG: display: A.0: plane_set_fb(432)
(kms_vrr:6323) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_vrr:6323) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_vrr:6323) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_vrr:6323) igt_kms-DEBUG: display: commit {
(kms_vrr:6323) igt_kms-DEBUG: display:     populating plane data: A.0, fb 432
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b0/432
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_ENCODING" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_RANGE" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: display: }
(kms_vrr:6323) igt_kms-DEBUG: display: commit {
(kms_vrr:6323) igt_kms-DEBUG: display:     populating plane data: A.0, fb 432
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b0/432
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_ENCODING" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_RANGE" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: display: }
(kms_vrr:6323) igt_kms-DEBUG: display: commit {
(kms_vrr:6323) igt_kms-DEBUG: display:     populating plane data: A.0, fb 432
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b0/432
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_ENCODING" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_RANGE" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: display: }
(kms_vrr:6323) DEBUG: event_ns - last_event_ns: 17126000 (58.39 Hz)
(kms_vrr:6323) igt_kms-DEBUG: display: A.0: plane_set_fb(433)
(kms_vrr:6323) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_vrr:6323) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_vrr:6323) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_vrr:6323) igt_kms-DEBUG: display: commit {
(kms_vrr:6323) igt_kms-DEBUG: display:     populating plane data: A.0, fb 433
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b1/433
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_ENCODING" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_RANGE" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: display: }
(kms_vrr:6323) igt_kms-DEBUG: display: commit {
(kms_vrr:6323) igt_kms-DEBUG: display:     populating plane data: A.0, fb 433
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b1/433
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_ENCODING" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_RANGE" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: display: }
(kms_vrr:6323) igt_kms-DEBUG: display: commit {
(kms_vrr:6323) igt_kms-DEBUG: display:     populating plane data: A.0, fb 433
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b1/433
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_ENCODING" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_RANGE" to 0x0/0
(kms_vrr:6323) igt_kms-DEBUG: display: }
(kms_vrr:6323) DEBUG: event_ns - last_event_ns: 17120000 (58.41 Hz)
(kms_vrr:6323) INFO: Completed 435 flips, 37 were in threshold for [(120 Hz) 8333333ns]
(kms_vrr:6323) CRITICAL: Test assertion failure function test_seamless_virtual_rr_basic, file ../tests/kms_vrr.c:776:
(kms_vrr:6323) CRITICAL: Failed assertion: result > 75
(kms_vrr:6323) CRITICAL: Refresh rate (120 Hz) 8333333ns: Target threshold not reached, result was 8%
(kms_vrr:6323) igt_core-INFO: Stack trace:
(kms_vrr:6323) igt_core-INFO:   #0 ../lib/igt_core.c:2075 __igt_fail_assert()
(kms_vrr:6323) igt_core-INFO:   #1 ../tests/kms_vrr.c:773 test_seamless_virtual_rr_basic()
(kms_vrr:6323) igt_core-INFO:   #2 ../tests/kms_vrr.c:998 run_vrr_test.constprop.0()
(kms_vrr:6323) igt_core-INFO:   #3 ../tests/kms_vrr.c:1105 __igt_unique____real_main1046()
(kms_vrr:6323) igt_core-INFO:   #4 ../tests/kms_vrr.c:1046 main()
(kms_vrr:6323) igt_core-INFO:   #5 ../sysdeps/nptl/libc_start_call_main.h:74 __libc_start_call_main()
(kms_vrr:6323) igt_core-INFO:   #6 ../csu/libc-start.c:128 __libc_start_main@@GLIBC_2.34()
(kms_vrr:6323) igt_core-INFO:   #7 [_start+0x25]
****  END  ****
Dynamic subtest pipe-A-eDP-1: FAIL (6.128s)
Subtest seamless-rr-switch-virtual: FAIL (6.422s)
Dmesg
<6> [501.428757] Console: switching to colour dummy device 80x25
<6> [501.429734] [IGT] kms_vrr: executing
<7> [501.436184] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1]
<7> [501.436194] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1]
<7> [501.436372] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [501.436483] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected
<7> [501.436767] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2]
<7> [501.436771] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2]
<7> [501.436929] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [501.437053] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] disconnected
<7> [501.437317] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3]
<7> [501.437321] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3]
<7> [501.437464] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [501.437572] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] disconnected
<7> [501.437873] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1]
<7> [501.437877] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:393:eDP-1]
<7> [501.438015] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on
<7> [501.438150] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7> [501.438609] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [501.438937] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [501.439066] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [501.439179] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [501.439314] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5> [501.439320] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [501.439323] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [501.439324] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] DisplayID extension version 0x13, primary use 0x00
<7> [501.439327] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5> [501.439330] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [501.439332] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD monitor
<5> [501.439336] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [501.439338] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD size 20, SAD count 0
<5> [501.439341] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [501.439355] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] VRR capable: yes
<7> [501.439667] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [501.440040] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5> [501.440581] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [501.440584] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [501.440586] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [501.440639] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] probed modes:
<7> [501.440643] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [501.440648] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [501.440663] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1]
<7> [501.440667] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1]
<7> [501.440836] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected
<7> [501.440849] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2]
<7> [501.440853] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2]
<7> [501.441007] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] disconnected
<7> [501.441018] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3]
<7> [501.441022] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3]
<7> [501.441168] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] disconnected
<6> [501.441704] [IGT] kms_vrr: starting subtest seamless-rr-switch-virtual
<6> [501.442831] [IGT] kms_vrr: starting dynamic subtest pipe-A-eDP-1
<7> [501.443696] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [501.465905] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [501.514858] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [501.514991] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 695310 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [501.515136] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 810000 bpp input 30 compressed 0.0000 HDR no link rate required 2607413 available 3240000
<7> [501.515267] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [501.515380] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A]
<7> [501.515483] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 64, data 6750791/8388608 link 450052/524288)
<7> [501.515577] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dpll_hw_state
<7> [501.515666] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [501.515753] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [501.515839] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: no,
<7> [501.515923] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.
<7> [501.516012] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:
<7> [501.516120] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21
<7> [501.516227] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [501.516334] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [501.516423] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [501.516503] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [501.516584] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [501.516664] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [501.516743] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [501.516823] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: yes,
<7> [501.516902] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 61440, rem: 0, den: 1,
<7> [501.516983] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 210, tx_clk_div: 0.
<7> [501.517091] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:
<7> [501.517197] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21
<7> [501.517301] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0x84, pll[3] = 0x1
<7> [501.517405] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [501.517491] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [501.517573] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0xf0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [501.517651] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x84, pll[17] = 0xf, pll[18] = 0xe5, pll[19] = 0x23
<7> [501.517728] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 695309)
<7> [501.517805] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 695309)
<7> [501.517882] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 432000, found 810000)
<7> [501.517958] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in min_voltage_level (expected 0, found 1)
<7> [501.518113] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [501.518218] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0
<7> [501.518351] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 4051) -> ( 0 - 4011), size 4051 -> 4011
<7> [501.518416] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4051 - 4096) -> (4011 - 4096), size 45 -> 85
<7> [501.518474] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [501.518531] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 2, 25, 25, 25, 25, 25, 0, 0, 0, 5, 0
<7> [501.518589] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 49, 601, 601, 601, 601, 601, 0, 0, 63, 121, 135
<7> [501.518647] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 55, 663, 663, 663, 663, 663, 0, 0, 64, 135, 136
<7> [501.518716] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 2781236 num active planes 1
<7> [501.518811] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [501.518907] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [501.519008] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [501.519118] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [501.519223] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [501.519343] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min cdclk: 173855 kHz -> 347655 kHz
<7> [501.519433] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min voltage level: 0 -> 1
<7> [501.519524] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 21732 kHz -> 43457 kHz
<7> [501.519611] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via crawling and squashing
<7> [501.519701] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 360000 kHz, actual 360000 kHz
<7> [501.519790] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 1, actual 1
<7> [501.519883] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated DPLL 0
<7> [501.519960] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0
<7> [501.520057] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]
<7> [501.520162] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [501.520268] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [501.520370] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [501.520451] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [501.520531] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [501.520611] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [501.520690] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6750791, data_n: 8388608, link_m: 450052, link_n: 524288, tu: 64
<7> [501.520769] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [501.520847] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [501.520922] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [501.521003] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [501.521098] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0
<7> [501.521195] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [501.521293] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [501.521381] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [501.521455] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [501.521529] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [501.521602] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [501.521677] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [501.521750] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [501.521823] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [501.521896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [501.521970] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [501.522118] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [501.522322] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [501.522423] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [501.522501] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=695309, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [501.522578] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 120 695309 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [501.522654] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=695309, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [501.522729] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 810000, pixel rate 695309, min cdclk 347655, min voltage level 1
<7> [501.522804] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 35, ips linetime: 0
<7> [501.522880] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0
<7> [501.522954] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0
<7> [501.523091] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [501.523189] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [501.523287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [501.523379] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [501.523459] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes,
<7> [501.523538] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 61440, rem: 0, den: 1,
<7> [501.523611] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 210, tx_clk_div: 0.
<7> [501.523684] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [501.523757] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [501.523830] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0x84, pll[3] = 0x1
<7> [501.523902] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [501.523975] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [501.524070] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0xf0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [501.524166] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x84, pll[17] = 0xf, pll[18] = 0xe5, pll[19] = 0x23
<7> [501.524267] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [501.524367] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [501.524449] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [501.524524] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [501.524599] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [501.524674] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [501.524748] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [501.524822] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [501.524895] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [501.524967] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [501.525061] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [501.525157] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [501.525251] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:432] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [501.525347] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [501.525431] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [501.525511] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [501.525583] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [501.525655] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [501.525727] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [501.525809] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [501.528083] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [501.528820] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [501.528941] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2
<7> [501.529616] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [501.529728] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [501.738156] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0
<7> [501.738368] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7> [501.747316] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off
<7> [501.747441] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [501.747566] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [501.799762] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [501.800279] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short
<7> [501.807048] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [501.807485] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]
<7> [501.807541] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [501.809091] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [501.809687] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [501.810381] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1801071 0x16832a72)
<7> [501.812060] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 360000 kHz, VCO 960000 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 1
<7> [501.812628] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 6 (mbus joined: yes)
<7> [501.813027] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=900
<7> [501.813497] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A]
<7> [501.813886] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1]
<7> [501.814382] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A]
<7> [501.814770] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B]
<7> [501.815169] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C]
<7> [501.815505] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2]
<7> [501.815839] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A]
<7> [501.816258] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B]
<7> [501.816590] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C]
<7> [501.816951] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3]
<7> [501.817371] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A]
<7> [501.817728] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B]
<7> [501.818098] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C]
<7> [501.818444] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:402:DP-1]
<7> [501.818773] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:414:DP-2]
<7> [501.819107] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:422:DP-3]
<7> [501.819513] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [501.821134] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]
<7> [501.821577] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [501.823938] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on
<7> [501.824273] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (484 ms remaining)
<7> [501.838594] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [501.838980] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long
<7> [501.839429] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [501.839914] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [502.314312] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [502.405327] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [502.405822] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on
<7> [502.406327] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [502.441939] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [502.442403] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long
<7> [502.442837] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [502.443342] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [502.498275] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [502.498411] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [502.498524] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [502.612023] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [502.612551] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on
<7> [502.613022] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [502.615339] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [502.616935] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [502.617931] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7> [502.619256] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [502.620670] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [502.621802] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK
<7> [502.622275] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [502.623834] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [502.624311] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 810000, lane count = 4
<7> [502.625136] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [502.625693] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [502.626168] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7> [502.626671] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 4518
<7> [502.642547] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [502.644547] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]
<7> [502.645364] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<7> [502.650427] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe A
<7> [505.096445] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD off
<7> [505.096625] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
<7> [507.526841] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [507.527036] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [507.527177] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<6> [507.571017] [IGT] kms_vrr: finished subtest pipe-A-eDP-1, FAIL
<7> [507.571349] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no)
<7> [507.571474] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [507.571587] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [507.571688] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0)
<7> [507.571785] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6750791/8388608 link 450052/524288, found tu 0, data 0/0 link 0/0)
<7> [507.571878] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [507.571967] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [507.572055] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [507.572145] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [507.572238] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [507.572329] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [507.572419] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [507.572517] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [507.572598] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [507.572679] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)
<7> [507.572765] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [507.572851] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [507.572936] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)
<7> [507.573021] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)
<7> [507.573106] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [507.573191] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [507.573273] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [507.573355] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [507.573438] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [507.573536] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [507.573619] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [507.573702] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)
<7> [507.573783] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [507.573864] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [507.573946] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)
<7> [507.574027] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)
<7> [507.574108] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [507.574189] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [507.574269] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [507.574344] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [507.574428] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 695309, found 0)
<7> [507.574512] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 695309, found 0)
<7> [507.574606] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 810000, found 0)
<7> [507.574690] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in min_voltage_level (expected 1, found 0)
<7> [507.574770] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [507.574848] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0
<7> [507.574964] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [507.575038] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0
<7> [507.575129] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 4011) -> ( 0 - 0), size 4011 -> 0
<7> [507.575201] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4011 - 4096) -> ( 0 - 0), size 85 -> 0
<7> [507.575268] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [507.575324] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 2, 25, 25, 25, 25, 25, 0, 0, 0, 5, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [507.575380] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 49, 601, 601, 601, 601, 601, 0, 0, 63, 121, 135 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [507.575453] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 55, 663, 663, 663, 663, 663, 0, 0, 64, 135, 136 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [507.575529] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [507.575621] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [507.575712] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [507.575801] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [507.575884] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [507.575965] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [507.576048] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min cdclk: 347655 kHz -> 0 kHz
<7> [507.576136] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min voltage level: 1 -> 0
<7> [507.576237] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 43457 kHz -> 0 kHz
<7> [507.576334] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via crawling and squashing
<7> [507.576443] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz
<7> [507.576525] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [507.576626] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: no [modeset]
<7> [507.576715] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [NOFB], visible: no
<7> [507.576801] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [507.576888] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [507.576972] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [507.577049] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [507.577127] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [507.577243] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [507.577825] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [507.577960] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2
<7> [507.578145] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on
<7> [507.578249] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7> [507.578838] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [507.578934] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [507.780870] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0
<7> [507.781460] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7> [507.786992] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off
<7> [507.787444] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [507.787901] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [507.839878] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [507.840257] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short
<7> [507.846601] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [507.847188] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]
<7> [507.847237] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [507.848888] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [507.849571] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [507.850221] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A]
<7> [507.850621] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1]
<7> [507.851005] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A]
<7> [507.851394] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B]
<7> [507.851713] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C]
<7> [507.852103] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2]
<7> [507.852408] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A]
<7> [507.852705] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B]
<7> [507.853031] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C]
<7> [507.853335] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3]
<7> [507.853636] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A]
<7> [507.853937] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B]
<7> [507.854223] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C]
<7> [507.854515] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]
<7> [507.854914] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 3 (mbus joined: no)
<7> [507.855203] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)
<7> [507.855485] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [507.856004] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [507.856417] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xaa000000)
<7> [507.858409] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<7> [507.858767] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [507.859259] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [507.859554] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384
<7> [507.860881] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<6> [507.863971] [IGT] kms_vrr: finished subtest seamless-rr-switch-virtual, FAIL
<7> [507.864950] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [507.865228] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [507.865473] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000
<7> [507.865826] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [507.866137] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A]
<7> [507.866408] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [507.866703] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [507.866972] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [507.867245] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [507.867496] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)
<7> [507.867761] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [507.867989] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [507.868212] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [507.868422] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [507.868669] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [507.868901] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [507.869103] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [507.869324] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [507.869528] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [507.869698] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)
<7> [507.869862] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [507.870037] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [507.870195] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)
<7> [507.870352] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)
<7> [507.870505] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [507.870651] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [507.870793] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [507.870930] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [507.871063] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [507.871196] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [507.871326] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [507.871453] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)
<7> [507.871769] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [507.871894] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [507.872018] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)
<7> [507.872137] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)
<7> [507.872270] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [507.872402] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [507.872528] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [507.872639] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dpll_hw_state
<7> [507.872745] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [507.872848] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [507.872951] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: yes,
<7> [507.873050] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 61440, rem: 0, den: 1,
<7> [507.873147] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 210, tx_clk_div: 0.
<7> [507.873246] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:
<7> [507.873342] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21
<7> [507.873439] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0x84, pll[3] = 0x1
<7> [507.873539] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [507.873628] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [507.873715] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0xf0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [507.873800] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x84, pll[17] = 0xf, pll[18] = 0xe5, pll[19] = 0x23
<7> [507.873884] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [507.873967] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [507.874049] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: no,
<7> [507.874129] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.
<7> [507.874210] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:
<7> [507.874290] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21
<7> [507.874367] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [507.874455] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [507.874538] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [507.874621] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [507.874702] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [507.874777] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [507.874851] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)
<7> [507.874926] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)
<7> [507.874999] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 432000)
<7> [507.875073] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [507.875198] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [507.875265] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1
<7> [507.875331] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051
<7> [507.875399] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45
<7> [507.875463] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [507.875532] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [507.875606] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [507.875679] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [507.875759] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 1390840 num active planes 1
<7> [507.875858] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [507.875955] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [507.876050] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [507.876134] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [507.876217] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [507.876299] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 173855 kHz
<7> [507.876549] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz
<7> [507.876654] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [507.876743] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz
<7> [507.876823] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [507.876922] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated DPLL 0
<7> [507.877001] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0
<7> [507.877084] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]
<7> [507.877167] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [507.877249] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [507.877337] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [507.877363] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [507.877428] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [507.877519] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [507.877516] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [507.877605] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [507.877621] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [507.877691] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [507.877751] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [507.877776] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [507.877860] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [507.877955] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [507.878055] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [507.878130] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [507.878154] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0
<7> [507.878223] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long
<7> [507.878240] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [507.878308] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [507.878327] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [507.878426] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [507.878426] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [507.878525] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [507.878622] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [507.878703] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [507.878777] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [507.878850] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [507.878924] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [507.878997] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [507.879071] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [507.879144] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [507.879216] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [507.879294] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [507.879385] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [507.879481] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [507.879576] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [507.879656] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 173855, min voltage level 0
<7> [507.879729] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [507.879801] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0
<7> [507.879876] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0
<7> [507.879953] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [507.880029] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [507.880105] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [507.880180] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [507.880254] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no,
<7> [507.880351] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [507.880433] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [507.880513] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [507.880589] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [507.880663] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [507.880736] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [507.880810] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [507.880883] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [507.880956] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [507.881028] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [507.881101] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [507.881173] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [507.881250] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [507.881330] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [507.881409] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [507.881487] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [507.881563] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [507.881635] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [507.881707] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [507.881779] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [507.881850] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:394] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [507.881923] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [507.881994] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [507.882065] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [507.882137] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [507.882211] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [507.882287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [507.882365] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [507.882492] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [507.882589] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [507.882835] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [507.882963] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [507.883107] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000)
<7> [507.883208] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7> [507.883302] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [507.883420] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [507.883522] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7> [507.883607] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A]
<7> [507.883674] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1]
<7> [507.883741] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A]
<7> [507.883808] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B]
<7> [507.883873] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C]
<7> [507.883938] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2]
<7> [507.884002] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A]
<7> [507.884067] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B]
<7> [507.884133] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C]
<7> [507.884244] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3]
<7> [507.884315] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A]
<7> [507.884385] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B]
<7> [507.884453] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C]
<7> [507.884538] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [507.884695] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)
<7> [507.884756] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7> [507.884859] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [507.886143] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]
<7> [507.886243] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [507.888231] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on
<7> [507.888311] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (458 ms remaining)
<7> [508.342483] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [508.382541] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [508.382994] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on
<7> [508.383508] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [508.419237] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [508.419645] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long
<7> [508.420002] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [508.420691] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [508.591068] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [508.591570] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on
<7> [508.591904] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [508.594044] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [508.595613] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [508.596446] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7> [508.597558] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [508.598943] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [508.600264] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK
<7> [508.600741] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [508.602403] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [508.602955] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7> [508.603992] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [508.604703] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [508.605277] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7> [508.605893] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 4518
<7> [508.638440] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [508.640128] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]
<7> [508.640503] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<7> [508.643573] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [508.645353] [IGT] kms_vrr: exiting, ret=98
<6> [508.655177] Console: switching to colour frame buffer device 180x56
Created at 2026-05-05 11:37:23