igt@xe_pm@d3hot-mmap-vram on shard-bmg@xe-4963-9ee0cde10752666aff536e55d224c02950c309b7 Test details

Detail	Value
Duration	13.68 seconds
Hostname	shard-bmg-1
Igt-Version	IGT-Version: 2.4-gaa5853ef5 (x86_64) (Linux: 7.1.0-rc1-lgci-xe-xe-4963-9ee0cde10752666af-debug+ x86_64)
Out	Using IGT_SRANDOM=1777639959 for randomisation Opened device: /dev/dri/card0 Starting subtest: d3hot-mmap-vram Subtest d3hot-mmap-vram: SUCCESS (13.675s)
Err	Starting subtest: d3hot-mmap-vram Subtest d3hot-mmap-vram: SUCCESS (13.675s)
Dmesg	<6> [157.998197] Console: switching to colour dummy device 80x25 <6> [157.998499] [IGT] xe_pm: executing <6> [158.046925] [IGT] xe_pm: starting subtest d3hot-mmap-vram <7> [158.048047] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [158.048255] xe 0000:03:00.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [158.048436] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [158.048609] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A] <7> [158.048782] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [158.048969] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [158.049122] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2 <7> [158.049374] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xd (total dbuf slices 0xf), mbus joined? no->no <7> [158.049606] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x5 -> 0x4 <7> [158.049791] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0 <7> [158.049915] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0 <7> [158.050023] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [158.050129] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [158.050235] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [158.050338] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [158.050454] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 0 num active planes 0 <7> [158.050599] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000 <7> [158.050736] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000 <7> [158.050871] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624 <7> [158.051023] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz <7> [158.051168] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated TC PLL 2 <7> [158.051288] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving TC PLL 2 <7> [158.051410] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset] <7> [158.051540] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [158.051665] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [158.051783] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [158.051905] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [158.052017] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [158.052129] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [158.052243] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 <7> [158.052354] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [158.052463] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [158.052569] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [158.052674] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [158.052776] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7> [158.052882] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [158.052983] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00 <7> [158.053083] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11 <7> [158.053189] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00 <7> [158.053293] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [158.053395] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [158.053495] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36 <7> [158.053598] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125 <7> [158.053703] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [158.053806] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [158.053917] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [158.054019] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [158.054121] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [158.054221] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [158.054322] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pixel rate 148500, min cdclk 192000, min voltage level 0 <7> [158.054423] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [158.054522] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [158.054621] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0 <7> [158.054720] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [158.054819] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [158.054925] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [158.055024] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [158.055123] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [158.055221] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000 <7> [158.055321] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [158.055425] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c <7> [158.055528] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110 <7> [158.055629] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c <7> [158.055728] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1 <7> [158.055828] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a <7> [158.055938] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81 <7> [158.056037] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000 <7> [158.056135] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001 <7> [158.056232] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000 <7> [158.056329] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [158.056427] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000 <7> [158.056525] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00 <7> [158.056627] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [158.056733] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [158.056833] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [158.056943] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [158.057043] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [158.057143] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [158.057243] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [158.057341] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [158.057439] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [158.057537] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [158.057635] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [158.057733] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [158.057831] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [158.058006] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [158.058119] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [158.058222] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [158.058322] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [158.058425] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [158.058523] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [158.058984] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G] Disable audio codec on [CRTC:151:pipe A] <7> [158.087793] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [158.105089] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [158.107869] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:151:pipe A] <7> [158.110170] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2 <7> [158.110817] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F] <7> [158.111258] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A] <7> [158.111600] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B] <7> [158.111958] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C] <7> [158.112295] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D] <7> [158.112618] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G] <7> [158.112957] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A] <7> [158.113273] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B] <7> [158.113590] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C] <7> [158.113921] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D] <7> [158.114238] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H] <7> [158.114520] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I] <7> [158.114793] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A] <7> [158.115095] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B] <7> [158.115354] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C] <7> [158.115621] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D] <7> [158.117682] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [158.118091] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xd <7> [158.118565] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [158.118791] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x8a000000) <7> [158.119249] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:527:DP-2] <7> [158.119452] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A] <7> [158.120223] xe 0000:03:00.0: [drm:intel_hdmi_compute_output_format [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [158.120403] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [158.120588] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe C] <7> [158.120773] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe C] fastset requirement not met in hw.active (expected yes, found no) <7> [158.120953] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] fastset requirement not met, forcing full modeset <7> [158.121124] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe C] releasing TC PLL 3 <7> [158.121308] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xd -> 0x1 (total dbuf slices 0xf), mbus joined? no->no <7> [158.121437] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe C] dbuf slices 0xc -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x4 -> 0x0 <7> [158.121588] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:153:plane 1C] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0 <7> [158.121705] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:263:cursor C] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0 <7> [158.121811] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [158.121936] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [158.122045] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [158.122148] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [158.122264] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe C] data rate 0 num active planes 0 <7> [158.122411] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000 <7> [158.122551] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000 <7> [158.122688] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0 <7> [158.122853] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz <7> [158.122998] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:269:pipe C] allocated TC PLL 3 <7> [158.123121] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:269:pipe C] reserving TC PLL 3 <7> [158.123241] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe C] enable: yes [modeset] <7> [158.123371] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [158.123495] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: C, pipe bpp: 36, dithering: 0 <7> [158.123615] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [158.123728] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [158.123845] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [158.123952] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [158.124062] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [158.124171] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [158.124277] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [158.124278] xe 0000:03:00.0: colorspace: RGB <7> [158.124280] xe 0000:03:00.0: scan mode: Underscan <7> [158.124281] xe 0000:03:00.0: colorimetry: No Data <7> [158.124282] xe 0000:03:00.0: picture aspect: No Data <7> [158.124284] xe 0000:03:00.0: active aspect: Same as Picture <7> [158.124285] xe 0000:03:00.0: itc: No Data <7> [158.124286] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [158.124287] xe 0000:03:00.0: quantization range: Full <7> [158.124288] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [158.124290] xe 0000:03:00.0: video code: 0 <7> [158.124291] xe 0000:03:00.0: ycc quantization range: Full <7> [158.124292] xe 0000:03:00.0: hdmi content type: Graphics <7> [158.124294] xe 0000:03:00.0: pixel repeat: 0 <7> [158.124295] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [158.124296] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [158.124298] xe 0000:03:00.0: vendor: Intel <7> [158.124299] xe 0000:03:00.0: product: Discrete gfx <7> [158.124300] xe 0000:03:00.0: source device information: PC General (0x9) <7> [158.124302] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [158.124303] xe 0000:03:00.0: empty frame <7> [158.124305] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 07 00 66 10 00 01 00 00 00 00 00 00 00 00 <7> [158.124408] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 05 e3 cd 0c 32 38 45 38 35 30 09 07 07 00 00 00 <7> [158.124509] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [158.124609] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [158.124710] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37 <7> [158.124811] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [158.124918] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [158.125018] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9 <7> [158.125126] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9 <7> [158.125229] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9 <7> [158.125331] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9 <7> [158.125431] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9 <7> [158.125531] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pixel rate 148500, min cdclk 192000, min voltage level 0 <7> [158.125629] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [158.125728] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [158.125826] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0 <7> [158.125940] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [158.126044] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [158.126145] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [158.126245] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [158.126346] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [158.126445] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [158.126545] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [158.126644] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8 <7> [158.126742] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [158.126844] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06 <7> [158.126941] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [158.127037] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [158.127141] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [158.127243] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [158.127343] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [158.127445] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400 <7> [158.127547] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [158.127647] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [158.127746] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [158.127847] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [158.127945] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [158.128043] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [158.128143] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [158.128248] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [158.128353] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [158.128452] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [158.128551] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [158.128649] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [158.128745] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [158.128845] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [158.128944] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [158.129048] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:153:plane 1C] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [158.129153] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [158.129254] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:183:plane 2C] fb: [NOFB], visible: no <7> [158.129353] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:213:plane 3C] fb: [NOFB], visible: no <7> [158.129452] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:243:plane 4C] fb: [NOFB], visible: no <7> [158.129554] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:253:plane 5C] fb: [NOFB], visible: no <7> [158.129652] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:263:cursor C] fb: [NOFB], visible: no <7> [158.130331] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:539:HDMI-A-3][ENCODER:538:DDI TC3/PHY H] Disable audio codec on [CRTC:269:pipe C] <7> [158.158836] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe C <7> [158.175104] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x4, on? 1) for [CRTC:269:pipe C] <7> [158.177728] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3 <7> [158.178674] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F] <7> [158.179265] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A] <7> [158.179778] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B] <7> [158.180326] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C] <7> [158.180816] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D] <7> [158.181383] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G] <7> [158.181870] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A] <7> [158.182294] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B] <7> [158.182714] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C] <7> [158.183143] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D] <7> [158.183528] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H] <7> [158.183901] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I] <7> [158.184277] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A] <7> [158.184636] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B] <7> [158.184983] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C] <7> [158.185296] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D] <7> [158.185830] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [158.186337] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [158.187138] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7> [158.187641] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xaa000000) <7> [158.188156] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [158.188619] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:539:HDMI-A-3] <7> [158.188904] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe C] <7> [158.209909] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [158.210873] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [158.211690] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [158.212507] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [158.213313] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [159.321127] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [159.321883] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [159.326569] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [159.331263] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [159.331995] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [159.334003] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [159.334960] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [159.338917] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [159.349699] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [159.351545] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [159.353027] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [159.357141] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [159.358556] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [159.368396] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [159.368766] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [159.368909] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [159.374982] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [159.376881] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [159.378692] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [159.380554] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [159.382563] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [159.384595] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [159.386433] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [159.388450] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [159.392222] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [159.394267] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [159.396122] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [159.398123] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [159.400131] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [159.402167] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [159.404053] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [159.406087] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [159.407994] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [159.408027] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [159.408042] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [159.408055] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [159.408068] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [159.408082] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [159.408098] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [159.408114] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [159.408130] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [159.408192] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [159.408403] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [159.409720] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [159.410177] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [159.411497] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [159.412168] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [159.412285] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [159.412628] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [159.412725] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [159.412729] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [159.412834] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [159.414082] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [159.414086] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [159.414185] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [159.439059] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [159.439063] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [159.439066] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [159.439068] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [159.439071] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [159.439074] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [159.439078] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor 28E850 <7> [159.439082] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [159.439085] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 32, SAD count 1 <7> [159.439346] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [159.439440] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [159.439774] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [159.439879] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [159.439892] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [159.444055] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [159.514165] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [159.515264] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [159.516104] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [159.516785] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [159.517516] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [160.647862] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [160.649436] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [160.654189] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [160.658665] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [160.659152] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [160.659850] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [160.660523] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [160.663950] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [160.674369] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [160.676349] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [160.677845] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [160.681907] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [160.683253] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [160.692231] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [160.692539] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [160.692657] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [160.697694] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [160.699549] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [160.701386] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [160.703253] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [160.705131] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [160.707113] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [160.708974] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [160.710952] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [160.714575] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [160.716548] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [160.718383] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [160.720374] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [160.722363] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [160.724348] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [160.726331] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [160.728323] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [160.730199] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [160.730218] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [160.730227] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [160.730236] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [160.730245] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [160.730255] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [160.730266] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [160.730277] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [160.730288] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [160.730327] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [160.730571] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [160.731881] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [160.732159] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [160.733466] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [160.734007] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [160.734103] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [160.734441] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [160.734536] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [160.734540] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [160.734631] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [160.735887] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [160.735890] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [160.735981] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [160.760841] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [160.760846] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [160.760849] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [160.760852] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [160.760855] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [160.760858] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [160.760862] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor 28E850 <7> [160.760865] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [160.760869] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 32, SAD count 1 <7> [160.761130] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [160.761221] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [160.761556] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [160.761652] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [160.761665] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [160.765884] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [160.834057] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [160.834962] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [160.835690] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [160.836349] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [160.837001] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [162.178894] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [162.179755] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [162.184667] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [162.189325] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [162.189818] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [162.190409] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [162.191008] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [162.195412] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [162.209189] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [162.211452] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [162.213314] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [162.217656] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [162.219177] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [162.228531] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [162.228719] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [162.228916] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [162.235062] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [162.237082] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [162.239001] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [162.241018] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [162.243035] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [162.245062] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [162.247092] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [162.249129] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [162.253155] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [162.255156] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [162.257083] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [162.259120] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [162.261108] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [162.263090] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [162.265149] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [162.267145] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [162.268880] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [162.268893] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [162.268899] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [162.268905] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [162.268910] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [162.268916] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [162.268924] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [162.268931] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [162.268938] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [162.268964] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [162.269196] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [162.270917] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [162.271115] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [162.272733] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [162.273286] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [162.273382] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [162.273838] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [162.273937] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [162.273941] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [162.274033] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [162.275386] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [162.275390] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [162.275484] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [162.300509] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [162.300514] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [162.300517] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [162.300520] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [162.300523] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [162.300526] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [162.300530] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor 28E850 <7> [162.300533] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [162.300537] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 32, SAD count 1 <7> [162.300903] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [162.301000] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [162.301453] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [162.301547] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [162.301560] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [162.305678] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [162.378107] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [162.379112] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [162.379951] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [162.380728] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [162.381574] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [163.504357] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [163.505044] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [163.509345] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [163.513953] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [163.514620] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [163.515431] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [163.516188] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [163.520639] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [163.535192] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [163.537667] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [163.541793] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [163.547288] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [163.549314] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [163.560186] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [163.560421] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [163.560601] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [163.566874] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [163.568921] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [163.570977] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [163.573046] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [163.575089] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [163.577171] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [163.579229] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [163.581186] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [163.585264] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [163.587190] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [163.589255] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [163.591199] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [163.593462] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [163.595449] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [163.597384] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [163.599357] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [163.601103] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [163.601118] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [163.601127] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [163.601135] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [163.601143] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [163.601151] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [163.601162] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [163.601171] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [163.601181] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [163.601217] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [163.601525] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [163.603181] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [163.603430] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [163.605069] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [163.605644] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [163.605740] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [163.606194] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [163.606290] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [163.606294] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [163.606390] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [163.607743] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [163.607746] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [163.607848] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [163.632837] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [163.632842] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [163.632845] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [163.632848] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [163.632851] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [163.632853] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [163.632857] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor 28E850 <7> [163.632861] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [163.632864] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 32, SAD count 1 <7> [163.633236] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [163.633326] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [163.633785] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [163.633880] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [163.633894] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [163.638030] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [163.706073] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [163.707086] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [163.707955] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [163.708728] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [163.709550] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [164.925580] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [164.926286] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [164.931066] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [164.935665] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [164.936370] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [164.937288] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [164.939182] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [164.942870] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [164.953661] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [164.955629] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [164.957130] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [164.961043] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [164.962431] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [164.972177] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [164.972536] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [164.972653] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [164.978302] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [164.980284] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [164.982275] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [164.984272] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [164.986267] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [164.988269] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [164.990271] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [164.992277] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [164.996162] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [164.998169] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [165.000177] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [165.002170] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [165.004203] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [165.006199] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [165.008222] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [165.010234] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [165.012044] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [165.012077] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [165.012093] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [165.012106] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [165.012118] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [165.012132] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [165.012149] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [165.012164] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [165.012181] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [165.012238] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [165.012521] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [165.013844] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [165.014223] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [165.015645] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [165.016284] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [165.016386] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [165.016727] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [165.016832] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [165.016836] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [165.016933] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [165.018185] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [165.018188] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [165.018283] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [165.043145] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [165.043149] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [165.043152] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [165.043155] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [165.043158] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [165.043161] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [165.043165] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor 28E850 <7> [165.043169] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [165.043172] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 32, SAD count 1 <7> [165.043432] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [165.043530] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [165.043873] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [165.043967] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [165.043981] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [165.048194] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [165.122081] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [165.122986] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [165.123682] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [165.124402] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [165.125137] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [166.447520] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [166.448265] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [166.452920] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [166.457128] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [166.457824] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [166.458764] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [166.459697] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [166.463766] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [166.474487] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [166.476393] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [166.477835] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [166.481889] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [166.483286] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [166.493057] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [166.493385] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [166.493568] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [166.499576] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [166.501421] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [166.503446] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [166.505473] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [166.507513] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [166.509550] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [166.511565] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [166.513428] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [166.517447] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [166.519473] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [166.521511] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [166.523569] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [166.525585] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [166.527495] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [166.529513] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [166.531534] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [166.533300] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [166.533318] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [166.533328] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [166.533338] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [166.533347] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [166.533357] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [166.533370] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [166.533382] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [166.533393] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [166.533436] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [166.533712] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [166.535169] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [166.535547] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [166.537439] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [166.538125] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [166.538233] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [166.538585] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [166.538682] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [166.538686] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [166.538790] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [166.540036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [166.540040] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [166.540133] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [166.564993] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [166.564997] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [166.565000] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [166.565003] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [166.565006] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [166.565009] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [166.565013] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor 28E850 <7> [166.565016] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [166.565020] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 32, SAD count 1 <7> [166.565280] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [166.565376] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [166.565716] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [166.565819] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [166.565833] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [166.569974] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [166.642109] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [166.643009] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [166.643708] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [166.644434] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [166.645134] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [168.670464] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [168.671234] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [168.676030] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [168.680745] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [168.681567] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [168.682541] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [168.683436] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [168.688187] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [168.702336] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [168.704742] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [168.706711] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [168.712216] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [168.713749] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [168.724162] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [168.724411] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [168.724595] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [168.730879] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [168.732907] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [168.734942] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [168.736965] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [168.738987] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [168.741012] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [168.743023] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [168.745076] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [168.749145] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [168.751171] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [168.753124] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [168.755099] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [168.757063] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [168.759063] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [168.760990] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [168.763048] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [168.764877] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [168.764895] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [168.764903] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [168.764910] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [168.764917] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [168.764924] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [168.764933] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [168.764941] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [168.764950] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [168.764980] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [168.765251] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [168.766999] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [168.767220] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [168.768880] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [168.769446] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [168.769542] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [168.769989] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [168.770085] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [168.770089] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [168.770181] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [168.771535] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [168.771538] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [168.771629] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [168.796644] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [168.796648] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [168.796651] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [168.796654] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [168.796657] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [168.796660] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [168.796664] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor 28E850 <7> [168.796667] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [168.796671] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 32, SAD count 1 <7> [168.797042] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [168.797136] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [168.797591] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [168.797682] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [168.797695] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [168.801914] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [168.873978] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [168.875001] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [168.875859] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [168.876639] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [168.877463] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [170.091478] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [170.092202] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [170.097323] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [170.102094] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [170.102847] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [170.103655] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [170.104503] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [170.109125] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [170.123382] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [170.125692] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [170.127669] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [170.133106] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [170.134640] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [170.145148] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [170.145385] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [170.145612] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [170.151942] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [170.153967] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [170.155989] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [170.158038] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [170.160016] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [170.161939] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [170.163981] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [170.165987] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [170.170284] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [170.172262] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [170.174189] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [170.176178] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [170.178082] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [170.180087] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [170.182118] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [170.184216] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [170.185971] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [170.185985] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [170.185993] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [170.186001] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [170.186008] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [170.186015] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [170.186025] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [170.186034] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [170.186043] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [170.186075] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [170.186359] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [170.188101] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [170.188339] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [170.190021] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [170.190582] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [170.190678] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [170.191128] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [170.191221] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [170.191224] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [170.191322] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [170.192677] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [170.192680] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [170.192788] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [170.217764] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [170.217768] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [170.217771] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [170.217774] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [170.217777] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [170.217780] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [170.217784] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor 28E850 <7> [170.217788] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [170.217791] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 32, SAD count 1 <7> [170.218163] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [170.218257] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [170.218713] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [170.218812] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [170.218826] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [170.222958] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [170.297978] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [170.299033] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [170.299877] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [170.300653] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [170.301490] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [171.414475] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [171.415223] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [171.420165] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [171.424795] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [171.425511] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [171.426338] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [171.427109] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [171.431555] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [171.445976] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [171.448248] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [171.450171] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [171.455486] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [171.457507] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [171.467314] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [171.467524] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [171.467748] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [171.474029] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [171.475998] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [171.477923] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [171.479967] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [171.482018] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [171.484052] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [171.486109] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [171.488102] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [171.492172] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [171.494112] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [171.496106] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [171.498157] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [171.500177] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [171.502113] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [171.504168] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [171.506128] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [171.507858] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [171.507876] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [171.507885] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [171.507893] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [171.507900] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [171.507907] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [171.507917] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [171.507926] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [171.507935] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [171.507967] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [171.508203] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [171.509853] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [171.510074] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [171.511682] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [171.512283] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [171.512381] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [171.512832] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [171.512927] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [171.512931] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [171.513022] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [171.514374] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [171.514377] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [171.514467] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [171.539442] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [171.539446] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [171.539449] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [171.539452] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [171.539455] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [171.539458] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [171.539462] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor 28E850 <7> [171.539465] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [171.539469] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 32, SAD count 1 <7> [171.539834] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [171.539935] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [171.540382] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [171.540479] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [171.540492] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [171.544612] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [171.548873] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [171.548992] xe 0000:03:00.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [171.549103] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [171.549213] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A] <7> [171.549321] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [171.549427] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [171.549530] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2 <7> [171.549670] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [171.549776] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [171.549880] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037 <7> [171.549959] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59 <7> [171.550037] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [171.550116] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 <7> [171.550192] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 <7> [171.550265] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 <7> [171.550351] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 594000 num active planes 1 <7> [171.550459] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000 <7> [171.550566] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000 <7> [171.550669] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624 <7> [171.550796] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz <7> [171.550913] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated TC PLL 2 <7> [171.551015] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving TC PLL 2 <7> [171.551115] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset] <7> [171.551222] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [171.551327] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [171.551434] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [171.551537] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [171.551637] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [171.551744] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [171.551843] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 <7> [171.551942] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [171.552040] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [171.552138] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [171.552235] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [171.552333] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7> [171.552430] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [171.552527] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00 <7> [171.552623] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11 <7> [171.552728] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00 <7> [171.552826] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [171.552924] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [171.553027] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36 <7> [171.553130] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125 <7> [171.553229] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [171.553332] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [171.553436] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [171.553539] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [171.553641] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [171.553750] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [171.553849] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pixel rate 148500, min cdclk 192000, min voltage level 0 <7> [171.553948] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [171.554046] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [171.554144] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0 <7> [171.554242] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [171.554339] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [171.554437] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [171.554534] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [171.554631] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [171.554736] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000 <7> [171.554834] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [171.554932] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c <7> [171.555029] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110 <7> [171.555125] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c <7> [171.555228] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1 <7> [171.555330] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a <7> [171.555430] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81 <7> [171.555529] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000 <7> [171.555627] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001 <7> [171.555735] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000 <7> [171.555832] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [171.555933] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000 <7> [171.556035] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00 <7> [171.556133] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [171.556231] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [171.556328] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [171.556427] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [171.556523] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [171.556620] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [171.556721] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [171.556818] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [171.556916] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [171.557017] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [171.557119] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [171.557220] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [171.557320] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [171.557421] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [171.557520] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [171.557619] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [171.557723] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [171.557821] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [171.557918] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [171.558023] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [171.558549] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [171.558675] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000) <7> [171.558791] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [171.559116] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F] <7> [171.559211] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A] <7> [171.559304] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B] <7> [171.559395] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C] <7> [171.559483] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D] <7> [171.559570] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G] <7> [171.559658] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A] <7> [171.559755] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B] <7> [171.559841] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C] <7> [171.559926] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D] <7> [171.560015] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H] <7> [171.560104] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I] <7> [171.560189] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A] <7> [171.560273] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B] <7> [171.560359] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C] <7> [171.560450] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D] <7> [171.560753] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [171.560925] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [171.561217] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [171.561324] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:151:pipe A] <7> [171.561420] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2 <7> [171.566471] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [171.571584] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [171.572711] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [171.573369] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a <7> [171.574897] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [171.575499] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1 <7> [171.581643] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Clock recovery OK <7> [171.581960] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3 <7> [171.588645] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful <7> [171.589117] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4 <7> [171.590468] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [171.608510] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G] Enable audio codec on [CRTC:151:pipe A], 40 bytes ELD <7> [171.625144] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:527:DP-2] <7> [171.626059] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A] <7> [171.631599] xe 0000:03:00.0: [drm:intel_hdmi_compute_output_format [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [171.632122] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [171.632599] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe C] <7> [171.633100] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe C] fastset requirement not met in hw.active (expected no, found yes) <7> [171.633544] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] fastset requirement not met, forcing full modeset <7> [171.633964] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe C] releasing TC PLL 3 <7> [171.634430] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [171.634754] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x5 <7> [171.635039] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe C] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x5 <7> [171.635364] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989 <7> [171.635602] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59 <7> [171.635863] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:153:plane 1C] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989 <7> [171.636081] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:263:cursor C] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59 <7> [171.636310] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,*stwm <7> [171.636522] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 <7> [171.636748] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 <7> [171.636964] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 <7> [171.637189] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe C] data rate 594000 num active planes 1 <7> [171.637455] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000 <7> [171.637728] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000 <7> [171.637990] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248 <7> [171.638251] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz <7> [171.638501] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:269:pipe C] allocated TC PLL 3 <7> [171.638737] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:269:pipe C] reserving TC PLL 3 <7> [171.638958] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe C] enable: yes [modeset] <7> [171.639182] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [171.639392] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: C, pipe bpp: 36, dithering: 0 <7> [171.639591] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [171.639801] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [171.639988] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [171.640170] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [171.640345] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [171.640518] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [171.640702] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [171.640705] xe 0000:03:00.0: colorspace: RGB <7> [171.640707] xe 0000:03:00.0: scan mode: Underscan <7> [171.640709] xe 0000:03:00.0: colorimetry: No Data <7> [171.640711] xe 0000:03:00.0: picture aspect: No Data <7> [171.640713] xe 0000:03:00.0: active aspect: Same as Picture <7> [171.640715] xe 0000:03:00.0: itc: No Data <7> [171.640717] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [171.640719] xe 0000:03:00.0: quantization range: Full <7> [171.640721] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [171.640723] xe 0000:03:00.0: video code: 0 <7> [171.640725] xe 0000:03:00.0: ycc quantization range: Full <7> [171.640727] xe 0000:03:00.0: hdmi content type: Graphics <7> [171.640729] xe 0000:03:00.0: pixel repeat: 0 <7> [171.640731] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [171.640733] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [171.640736] xe 0000:03:00.0: vendor: Intel <7> [171.640738] xe 0000:03:00.0: product: Discrete gfx <7> [171.640740] xe 0000:03:00.0: source device information: PC General (0x9) <7> [171.640742] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [171.640744] xe 0000:03:00.0: empty frame <7> [171.640747] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 07 00 66 10 00 01 00 00 00 00 00 00 00 00 <7> [171.640916] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 05 e3 cd 0c 32 38 45 38 35 30 09 07 07 00 00 00 <7> [171.641079] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [171.641233] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [171.641383] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37 <7> [171.641529] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [171.641669] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [171.641847] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9 <7> [171.641991] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9 <7> [171.642123] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9 <7> [171.642255] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9 <7> [171.642380] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9 <7> [171.642504] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pixel rate 148500, min cdclk 192000, min voltage level 0 <7> [171.642624] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [171.642753] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [171.642873] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0 <7> [171.642990] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [171.643104] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [171.643215] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [171.643321] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [171.643427] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [171.643537] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [171.643646] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [171.643762] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8 <7> [171.643870] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [171.643976] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06 <7> [171.644080] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [171.644185] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [171.644290] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [171.644395] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [171.644506] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [171.644622] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400 <7> [171.644743] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [171.644854] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [171.644966] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [171.645076] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [171.645184] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [171.645291] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [171.645398] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [171.645504] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [171.645610] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [171.645724] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [171.645830] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [171.645938] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [171.646049] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [171.646159] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [171.646267] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [171.646373] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:153:plane 1C] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [171.646481] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [171.646590] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [171.646708] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:183:plane 2C] fb: [NOFB], visible: no <7> [171.646818] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:213:plane 3C] fb: [NOFB], visible: no <7> [171.646924] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:243:plane 4C] fb: [NOFB], visible: no <7> [171.647029] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:253:plane 5C] fb: [NOFB], visible: no <7> [171.647133] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:263:cursor C] fb: [NOFB], visible: no <7> [171.647936] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [171.648073] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x88000000) <7> [171.648195] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F] <7> [171.648300] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A] <7> [171.648400] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B] <7> [171.648499] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C] <7> [171.648598] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D] <7> [171.648700] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G] <7> [171.648795] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A] <7> [171.648893] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B] <7> [171.648989] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C] <7> [171.649082] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D] <7> [171.649174] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H] <7> [171.649272] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I] <7> [171.649368] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A] <7> [171.649461] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B] <7> [171.649554] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C] <7> [171.649648] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D] <7> [171.658072] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [171.658401] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A) <7> [171.675011] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x4, on? 0) for [CRTC:269:pipe C] <7> [171.675341] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3 <7> [171.678046] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe C <7> [171.697221] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:539:HDMI-A-3][ENCODER:538:DDI TC3/PHY H] Enable audio codec on [CRTC:269:pipe C], 32 bytes ELD <7> [171.697970] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [171.713878] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000) <7> [171.714549] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N <7> [171.715597] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:539:HDMI-A-3] <7> [171.716481] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe C] <6> [171.723409] [IGT] xe_pm: finished subtest d3hot-mmap-vram, SUCCESS <7> [171.742372] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [171.744369] [IGT] xe_pm: exiting, ret=0 <6> [171.764443] Console: switching to colour frame buffer device 240x67

<6> [157.998197] Console: switching to colour dummy device 80x25

<6> [158.046925] [IGT] xe_pm: starting subtest d3hot-mmap-vram

<7> [158.048047] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [158.048255] xe 0000:03:00.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [158.048436] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [158.048609] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A]

<7> [158.048782] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [158.048969] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [158.049122] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2

<7> [158.049374] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xd (total dbuf slices 0xf), mbus joined? no->no

<7> [158.049606] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x5 -> 0x4

<7> [158.049791] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0

<7> [158.049915] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0

<7> [158.050023] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [158.050129] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [158.050235] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [158.050338] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [158.050454] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 0 num active planes 0

<7> [158.050599] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000

<7> [158.050736] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000

<7> [158.050871] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624

<7> [158.051023] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz

<7> [158.051168] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated TC PLL 2

<7> [158.051288] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving TC PLL 2

<7> [158.051410] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]

<7> [158.051540] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [158.051665] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0

<7> [158.051783] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [158.051905] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [158.052017] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [158.052129] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [158.052243] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64

<7> [158.052354] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [158.052463] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [158.052569] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [158.052674] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [158.052776] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0

<7> [158.052882] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [158.052983] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00

<7> [158.053083] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11

<7> [158.053189] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00

<7> [158.053293] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [158.053395] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [158.053495] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36

<7> [158.053598] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125

<7> [158.053703] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [158.053806] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [158.053917] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [158.054019] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [158.054121] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [158.054221] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [158.054322] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pixel rate 148500, min cdclk 192000, min voltage level 0

<7> [158.054423] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [158.054522] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [158.054621] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0

<7> [158.054720] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [158.054819] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [158.054925] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [158.055024] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [158.055123] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [158.055221] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000

<7> [158.055321] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [158.055425] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c

<7> [158.055528] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110

<7> [158.055629] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c

<7> [158.055728] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1

<7> [158.055828] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a

<7> [158.055938] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81

<7> [158.056037] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000

<7> [158.056135] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001

<7> [158.056232] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000

<7> [158.056329] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [158.056427] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000

<7> [158.056525] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00

<7> [158.056627] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [158.056733] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [158.056833] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [158.056943] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [158.057043] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [158.057143] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [158.057243] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [158.057341] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [158.057439] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [158.057537] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [158.057635] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [158.057733] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [158.057831] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [158.058006] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [158.058119] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [158.058222] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [158.058322] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [158.058425] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [158.058523] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [158.058984] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G] Disable audio codec on [CRTC:151:pipe A]

<7> [158.087793] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [158.105089] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [158.107869] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:151:pipe A]

<7> [158.110170] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2

<7> [158.110817] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F]

<7> [158.111258] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A]

<7> [158.111600] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B]

<7> [158.111958] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C]

<7> [158.112295] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D]

<7> [158.112618] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G]

<7> [158.112957] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A]

<7> [158.113273] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B]

<7> [158.113590] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C]

<7> [158.113921] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D]

<7> [158.114238] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H]

<7> [158.114520] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I]

<7> [158.114793] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A]

<7> [158.115095] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B]

<7> [158.115354] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C]

<7> [158.115621] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D]

<7> [158.117682] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [158.118091] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xd

<7> [158.118565] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A

<7> [158.118791] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x8a000000)

<7> [158.119249] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:527:DP-2]

<7> [158.119452] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]

<7> [158.120223] xe 0000:03:00.0: [drm:intel_hdmi_compute_output_format [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [158.120403] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [158.120588] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe C]

<7> [158.120773] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe C] fastset requirement not met in hw.active (expected yes, found no)

<7> [158.120953] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] fastset requirement not met, forcing full modeset

<7> [158.121124] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe C] releasing TC PLL 3

<7> [158.121308] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xd -> 0x1 (total dbuf slices 0xf), mbus joined? no->no

<7> [158.121437] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe C] dbuf slices 0xc -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x4 -> 0x0

<7> [158.121588] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:153:plane 1C] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0

<7> [158.121705] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:263:cursor C] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0

<7> [158.121811] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [158.121936] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [158.122045] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [158.122148] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [158.122264] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe C] data rate 0 num active planes 0

<7> [158.122411] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000

<7> [158.122551] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000

<7> [158.122688] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0

<7> [158.122853] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz

<7> [158.122998] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:269:pipe C] allocated TC PLL 3

<7> [158.123121] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:269:pipe C] reserving TC PLL 3

<7> [158.123241] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe C] enable: yes [modeset]

<7> [158.123371] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [158.123495] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: C, pipe bpp: 36, dithering: 0

<7> [158.123615] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [158.123728] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [158.123845] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [158.123952] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [158.124062] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [158.124171] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [158.124277] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [158.124280] xe 0000:03:00.0: scan mode: Underscan

<7> [158.124281] xe 0000:03:00.0: colorimetry: No Data

<7> [158.124282] xe 0000:03:00.0: picture aspect: No Data

<7> [158.124284] xe 0000:03:00.0: active aspect: Same as Picture

<7> [158.124286] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [158.124287] xe 0000:03:00.0: quantization range: Full

<7> [158.124288] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [158.124291] xe 0000:03:00.0: ycc quantization range: Full

<7> [158.124292] xe 0000:03:00.0: hdmi content type: Graphics

<7> [158.124295] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [158.124296] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [158.124299] xe 0000:03:00.0: product: Discrete gfx

<7> [158.124300] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [158.124302] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [158.124305] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 07 00 66 10 00 01 00 00 00 00 00 00 00 00

<7> [158.124408] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 05 e3 cd 0c 32 38 45 38 35 30 09 07 07 00 00 00

<7> [158.124509] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [158.124609] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [158.124710] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37

<7> [158.124811] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [158.124918] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [158.125018] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9

<7> [158.125126] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9

<7> [158.125229] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9

<7> [158.125331] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9

<7> [158.125431] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9

<7> [158.125531] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pixel rate 148500, min cdclk 192000, min voltage level 0

<7> [158.125629] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [158.125728] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [158.125826] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0

<7> [158.125940] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [158.126044] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [158.126145] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [158.126245] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [158.126346] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [158.126445] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [158.126545] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [158.126644] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8

<7> [158.126742] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [158.126844] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06

<7> [158.126941] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [158.127037] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [158.127141] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [158.127243] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [158.127343] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [158.127445] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400

<7> [158.127547] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [158.127647] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [158.127746] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [158.127847] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [158.127945] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [158.128043] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [158.128143] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [158.128248] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [158.128353] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [158.128452] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [158.128551] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [158.128649] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [158.128745] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [158.128845] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [158.128944] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [158.129048] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:153:plane 1C] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [158.129153] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [158.129254] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:183:plane 2C] fb: [NOFB], visible: no

<7> [158.129353] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:213:plane 3C] fb: [NOFB], visible: no

<7> [158.129452] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:243:plane 4C] fb: [NOFB], visible: no

<7> [158.129554] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:253:plane 5C] fb: [NOFB], visible: no

<7> [158.129652] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:263:cursor C] fb: [NOFB], visible: no

<7> [158.130331] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:539:HDMI-A-3][ENCODER:538:DDI TC3/PHY H] Disable audio codec on [CRTC:269:pipe C]

<7> [158.158836] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe C

<7> [158.175104] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x4, on? 1) for [CRTC:269:pipe C]

<7> [158.177728] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3

<7> [158.178674] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F]

<7> [158.179265] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A]

<7> [158.179778] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B]

<7> [158.180326] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C]

<7> [158.180816] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D]

<7> [158.181383] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G]

<7> [158.181870] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A]

<7> [158.182294] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B]

<7> [158.182714] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C]

<7> [158.183143] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D]

<7> [158.183528] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H]

<7> [158.183901] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I]

<7> [158.184277] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A]

<7> [158.184636] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B]

<7> [158.184983] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C]

<7> [158.185296] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D]

<7> [158.185830] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [158.186337] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [158.187138] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C

<7> [158.187641] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xaa000000)

<7> [158.188156] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [158.188619] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [158.188904] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe C]

<7> [158.209909] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [158.210873] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [158.211690] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [158.212507] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [158.213313] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [159.321127] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [159.321883] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [159.326569] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [159.331263] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [159.331995] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [159.334003] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [159.334960] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [159.338917] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [159.349699] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [159.351545] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [159.353027] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [159.357141] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [159.358556] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [159.368396] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [159.368766] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [159.368909] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [159.374982] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [159.376881] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [159.378692] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [159.380554] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [159.382563] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [159.384595] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [159.386433] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [159.388450] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [159.392222] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [159.394267] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [159.396122] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [159.398123] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [159.400131] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [159.402167] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [159.404053] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [159.406087] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [159.407994] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [159.408027] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [159.408042] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [159.408055] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [159.408068] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [159.408082] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [159.408098] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [159.408114] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [159.408130] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [159.408192] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [159.408403] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [159.409720] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [159.410177] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [159.411497] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [159.412168] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [159.412285] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [159.412628] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [159.412725] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [159.412729] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [159.412834] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [159.414082] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [159.414086] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [159.414185] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [159.439059] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [159.439063] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [159.439066] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [159.439068] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [159.439071] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [159.439074] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [159.439078] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor 28E850

<7> [159.439082] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [159.439085] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 32, SAD count 1

<7> [159.439346] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [159.439440] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [159.439774] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [159.439879] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [159.439892] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [159.444055] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [159.514165] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [159.515264] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [159.516104] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [159.516785] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [159.517516] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [160.647862] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [160.649436] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [160.654189] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [160.658665] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [160.659152] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [160.659850] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [160.660523] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [160.663950] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [160.674369] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [160.676349] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [160.677845] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [160.681907] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [160.683253] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [160.692231] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [160.692539] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [160.692657] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [160.697694] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [160.699549] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [160.701386] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [160.703253] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [160.705131] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [160.707113] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [160.708974] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [160.710952] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [160.714575] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [160.716548] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [160.718383] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [160.720374] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [160.722363] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [160.724348] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [160.726331] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [160.728323] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [160.730199] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [160.730218] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [160.730227] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [160.730236] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [160.730245] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [160.730255] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [160.730266] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [160.730277] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [160.730288] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [160.730327] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [160.730571] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [160.731881] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [160.732159] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [160.733466] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [160.734007] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [160.734103] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [160.734441] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [160.734536] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [160.734540] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [160.734631] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [160.735887] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [160.735890] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [160.735981] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [160.760841] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [160.760846] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [160.760849] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [160.760852] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [160.760855] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [160.760858] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [160.760862] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor 28E850

<7> [160.760865] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [160.760869] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 32, SAD count 1

<7> [160.761130] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [160.761221] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [160.761556] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [160.761652] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [160.761665] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [160.765884] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [160.834057] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [160.834962] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [160.835690] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [160.836349] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [160.837001] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [162.178894] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [162.179755] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [162.184667] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [162.189325] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [162.189818] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [162.190409] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [162.191008] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [162.195412] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [162.209189] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [162.211452] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [162.213314] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [162.217656] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [162.219177] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [162.228531] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [162.228719] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [162.228916] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [162.235062] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [162.237082] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [162.239001] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [162.241018] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [162.243035] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [162.245062] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [162.247092] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [162.249129] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [162.253155] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [162.255156] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [162.257083] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [162.259120] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [162.261108] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [162.263090] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [162.265149] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [162.267145] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [162.268880] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [162.268893] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [162.268899] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [162.268905] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [162.268910] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [162.268916] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [162.268924] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [162.268931] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [162.268938] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [162.268964] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [162.269196] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [162.270917] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [162.271115] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [162.272733] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [162.273286] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [162.273382] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [162.273838] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [162.273937] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [162.273941] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [162.274033] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [162.275386] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [162.275390] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [162.275484] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [162.300509] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [162.300514] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [162.300517] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [162.300520] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [162.300523] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [162.300526] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [162.300530] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor 28E850

<7> [162.300533] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [162.300537] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 32, SAD count 1

<7> [162.300903] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [162.301000] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [162.301453] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [162.301547] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [162.301560] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [162.305678] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [162.378107] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [162.379112] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [162.379951] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [162.380728] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [162.381574] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [163.504357] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [163.505044] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [163.509345] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [163.513953] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [163.514620] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [163.515431] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [163.516188] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [163.520639] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [163.535192] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [163.537667] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [163.541793] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [163.547288] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [163.549314] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [163.560186] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [163.560421] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [163.560601] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [163.566874] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [163.568921] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [163.570977] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [163.573046] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [163.575089] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [163.577171] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [163.579229] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [163.581186] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [163.585264] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [163.587190] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [163.589255] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [163.591199] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [163.593462] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [163.595449] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [163.597384] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [163.599357] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [163.601103] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [163.601118] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [163.601127] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [163.601135] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [163.601143] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [163.601151] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [163.601162] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [163.601171] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [163.601181] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [163.601217] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [163.601525] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [163.603181] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [163.603430] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [163.605069] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [163.605644] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [163.605740] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [163.606194] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [163.606290] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [163.606294] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [163.606390] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [163.607743] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [163.607746] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [163.607848] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [163.632837] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [163.632842] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [163.632845] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [163.632848] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [163.632851] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [163.632853] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [163.632857] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor 28E850

<7> [163.632861] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [163.632864] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 32, SAD count 1

<7> [163.633236] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [163.633326] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [163.633785] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [163.633880] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [163.633894] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [163.638030] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [163.706073] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [163.707086] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [163.707955] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [163.708728] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [163.709550] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [164.925580] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [164.926286] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [164.931066] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [164.935665] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [164.936370] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [164.937288] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [164.939182] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [164.942870] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [164.953661] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [164.955629] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [164.957130] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [164.961043] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [164.962431] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [164.972177] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [164.972536] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [164.972653] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [164.978302] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [164.980284] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [164.982275] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [164.984272] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [164.986267] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [164.988269] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [164.990271] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [164.992277] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [164.996162] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [164.998169] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [165.000177] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [165.002170] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [165.004203] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [165.006199] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [165.008222] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [165.010234] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [165.012044] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [165.012077] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [165.012093] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [165.012106] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [165.012118] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [165.012132] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [165.012149] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [165.012164] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [165.012181] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [165.012238] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [165.012521] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [165.013844] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [165.014223] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [165.015645] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [165.016284] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [165.016386] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [165.016727] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [165.016832] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [165.016836] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [165.016933] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [165.018185] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [165.018188] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [165.018283] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [165.043145] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [165.043149] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [165.043152] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [165.043155] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [165.043158] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [165.043161] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [165.043165] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor 28E850

<7> [165.043169] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [165.043172] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 32, SAD count 1

<7> [165.043432] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [165.043530] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [165.043873] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [165.043967] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [165.043981] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [165.048194] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [165.122081] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [165.122986] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [165.123682] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [165.124402] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [165.125137] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [166.447520] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [166.448265] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [166.452920] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [166.457128] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [166.457824] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [166.458764] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [166.459697] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [166.463766] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [166.474487] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [166.476393] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [166.477835] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [166.481889] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [166.483286] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [166.493057] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [166.493385] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [166.493568] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [166.499576] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [166.501421] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [166.503446] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [166.505473] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [166.507513] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [166.509550] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [166.511565] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [166.513428] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [166.517447] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [166.519473] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [166.521511] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [166.523569] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [166.525585] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [166.527495] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [166.529513] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [166.531534] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [166.533300] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [166.533318] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [166.533328] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [166.533338] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [166.533347] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [166.533357] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [166.533370] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [166.533382] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [166.533393] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [166.533436] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [166.533712] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [166.535169] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [166.535547] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [166.537439] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [166.538125] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [166.538233] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [166.538585] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [166.538682] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [166.538686] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [166.538790] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [166.540036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [166.540040] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [166.540133] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [166.564993] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [166.564997] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [166.565000] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [166.565003] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [166.565006] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [166.565009] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [166.565013] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor 28E850

<7> [166.565016] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [166.565020] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 32, SAD count 1

<7> [166.565280] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [166.565376] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [166.565716] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [166.565819] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [166.565833] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [166.569974] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [166.642109] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [166.643009] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [166.643708] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [166.644434] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [166.645134] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [168.670464] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [168.671234] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [168.676030] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [168.680745] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [168.681567] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [168.682541] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [168.683436] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [168.688187] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [168.702336] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [168.704742] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [168.706711] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [168.712216] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [168.713749] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [168.724162] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [168.724411] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [168.724595] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [168.730879] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [168.732907] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [168.734942] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [168.736965] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [168.738987] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [168.741012] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [168.743023] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [168.745076] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [168.749145] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [168.751171] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [168.753124] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [168.755099] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [168.757063] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [168.759063] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [168.760990] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [168.763048] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [168.764877] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [168.764895] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [168.764903] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [168.764910] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [168.764917] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [168.764924] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [168.764933] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [168.764941] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [168.764950] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [168.764980] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [168.765251] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [168.766999] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [168.767220] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [168.768880] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [168.769446] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [168.769542] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [168.769989] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [168.770085] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [168.770089] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [168.770181] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [168.771535] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [168.771538] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [168.771629] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [168.796644] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [168.796648] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [168.796651] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [168.796654] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [168.796657] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [168.796660] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [168.796664] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor 28E850

<7> [168.796667] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [168.796671] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 32, SAD count 1

<7> [168.797042] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [168.797136] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [168.797591] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [168.797682] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [168.797695] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [168.801914] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [168.873978] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [168.875001] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [168.875859] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [168.876639] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [168.877463] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [170.091478] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [170.092202] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [170.097323] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [170.102094] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [170.102847] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [170.103655] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [170.104503] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [170.109125] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [170.123382] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [170.125692] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [170.127669] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [170.133106] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [170.134640] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [170.145148] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [170.145385] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [170.145612] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [170.151942] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [170.153967] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [170.155989] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [170.158038] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [170.160016] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [170.161939] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [170.163981] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [170.165987] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [170.170284] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [170.172262] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [170.174189] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [170.176178] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [170.178082] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [170.180087] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [170.182118] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [170.184216] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [170.185971] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [170.185985] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [170.185993] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [170.186001] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [170.186008] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [170.186015] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [170.186025] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [170.186034] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [170.186043] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [170.186075] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [170.186359] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [170.188101] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [170.188339] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [170.190021] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [170.190582] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [170.190678] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [170.191128] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [170.191221] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [170.191224] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [170.191322] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [170.192677] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [170.192680] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [170.192788] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [170.217764] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [170.217768] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [170.217771] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [170.217774] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [170.217777] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [170.217780] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [170.217784] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor 28E850

<7> [170.217788] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [170.217791] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 32, SAD count 1

<7> [170.218163] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [170.218257] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [170.218713] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [170.218812] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [170.218826] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [170.222958] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [170.297978] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [170.299033] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [170.299877] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [170.300653] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [170.301490] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [171.414475] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [171.415223] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [171.420165] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [171.424795] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [171.425511] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [171.426338] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [171.427109] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [171.431555] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [171.445976] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [171.448248] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [171.450171] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [171.455486] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [171.457507] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [171.467314] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [171.467524] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [171.467748] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [171.474029] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [171.475998] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [171.477923] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [171.479967] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [171.482018] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [171.484052] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [171.486109] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [171.488102] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [171.492172] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [171.494112] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [171.496106] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [171.498157] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [171.500177] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [171.502113] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [171.504168] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [171.506128] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [171.507858] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [171.507876] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [171.507885] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [171.507893] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [171.507900] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [171.507907] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [171.507917] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [171.507926] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [171.507935] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [171.507967] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [171.508203] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [171.509853] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [171.510074] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [171.511682] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [171.512283] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [171.512381] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [171.512832] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [171.512927] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [171.512931] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [171.513022] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [171.514374] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [171.514377] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [171.514467] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [171.539442] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [171.539446] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [171.539449] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [171.539452] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [171.539455] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [171.539458] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [171.539462] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor 28E850

<7> [171.539465] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [171.539469] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 32, SAD count 1

<7> [171.539834] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [171.539935] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [171.540382] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [171.540479] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [171.540492] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [171.544612] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [171.548873] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [171.548992] xe 0000:03:00.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [171.549103] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [171.549213] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A]

<7> [171.549321] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [171.549427] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [171.549530] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2

<7> [171.549670] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [171.549776] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [171.549880] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037

<7> [171.549959] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59

<7> [171.550037] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [171.550116] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0

<7> [171.550192] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255

<7> [171.550265] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267

<7> [171.550351] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 594000 num active planes 1

<7> [171.550459] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000

<7> [171.550566] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000

<7> [171.550669] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624

<7> [171.550796] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz

<7> [171.550913] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated TC PLL 2

<7> [171.551015] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving TC PLL 2

<7> [171.551115] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]

<7> [171.551222] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [171.551327] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0

<7> [171.551434] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [171.551537] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [171.551637] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [171.551744] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [171.551843] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64

<7> [171.551942] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [171.552040] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [171.552138] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [171.552235] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [171.552333] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0

<7> [171.552430] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [171.552527] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00

<7> [171.552623] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11

<7> [171.552728] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00

<7> [171.552826] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [171.552924] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [171.553027] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36

<7> [171.553130] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125

<7> [171.553229] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [171.553332] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [171.553436] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [171.553539] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [171.553641] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [171.553750] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [171.553849] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pixel rate 148500, min cdclk 192000, min voltage level 0

<7> [171.553948] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [171.554046] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [171.554144] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0

<7> [171.554242] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [171.554339] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [171.554437] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [171.554534] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [171.554631] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [171.554736] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000

<7> [171.554834] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [171.554932] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c

<7> [171.555029] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110

<7> [171.555125] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c

<7> [171.555228] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1

<7> [171.555330] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a

<7> [171.555430] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81

<7> [171.555529] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000

<7> [171.555627] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001

<7> [171.555735] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000

<7> [171.555832] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [171.555933] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000

<7> [171.556035] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00

<7> [171.556133] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [171.556231] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [171.556328] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [171.556427] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [171.556523] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [171.556620] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [171.556721] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [171.556818] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [171.556916] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [171.557017] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [171.557119] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [171.557220] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [171.557320] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [171.557421] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [171.557520] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [171.557619] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [171.557723] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [171.557821] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [171.557918] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [171.558023] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [171.558549] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [171.558675] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000)

<7> [171.558791] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [171.559116] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F]

<7> [171.559211] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A]

<7> [171.559304] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B]

<7> [171.559395] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C]

<7> [171.559483] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D]

<7> [171.559570] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G]

<7> [171.559658] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A]

<7> [171.559755] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B]

<7> [171.559841] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C]

<7> [171.559926] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D]

<7> [171.560015] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H]

<7> [171.560104] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I]

<7> [171.560189] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A]

<7> [171.560273] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B]

<7> [171.560359] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C]

<7> [171.560450] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D]

<7> [171.560753] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [171.560925] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [171.561217] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [171.561324] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:151:pipe A]

<7> [171.561420] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2

<7> [171.566471] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [171.571584] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [171.572711] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [171.573369] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a

<7> [171.574897] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [171.575499] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1

<7> [171.581643] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Clock recovery OK

<7> [171.581960] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3

<7> [171.588645] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful

<7> [171.589117] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4

<7> [171.590468] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [171.608510] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G] Enable audio codec on [CRTC:151:pipe A], 40 bytes ELD

<7> [171.625144] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:527:DP-2]

<7> [171.626059] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]

<7> [171.631599] xe 0000:03:00.0: [drm:intel_hdmi_compute_output_format [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [171.632122] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [171.632599] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe C]

<7> [171.633100] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe C] fastset requirement not met in hw.active (expected no, found yes)

<7> [171.633544] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] fastset requirement not met, forcing full modeset

<7> [171.633964] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe C] releasing TC PLL 3

<7> [171.634430] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [171.634754] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x5

<7> [171.635039] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe C] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x5

<7> [171.635364] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989

<7> [171.635602] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59

<7> [171.635863] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:153:plane 1C] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989

<7> [171.636081] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:263:cursor C] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59

<7> [171.636310] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [171.636522] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0

<7> [171.636748] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255

<7> [171.636964] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267

<7> [171.637189] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe C] data rate 594000 num active planes 1

<7> [171.637455] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000

<7> [171.637728] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000

<7> [171.637990] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248

<7> [171.638251] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz

<7> [171.638501] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:269:pipe C] allocated TC PLL 3

<7> [171.638737] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:269:pipe C] reserving TC PLL 3

<7> [171.638958] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe C] enable: yes [modeset]

<7> [171.639182] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [171.639392] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: C, pipe bpp: 36, dithering: 0

<7> [171.639591] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [171.639801] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [171.639988] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [171.640170] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [171.640345] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [171.640518] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [171.640702] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [171.640707] xe 0000:03:00.0: scan mode: Underscan

<7> [171.640709] xe 0000:03:00.0: colorimetry: No Data

<7> [171.640711] xe 0000:03:00.0: picture aspect: No Data

<7> [171.640713] xe 0000:03:00.0: active aspect: Same as Picture

<7> [171.640717] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [171.640719] xe 0000:03:00.0: quantization range: Full

<7> [171.640721] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [171.640725] xe 0000:03:00.0: ycc quantization range: Full

<7> [171.640727] xe 0000:03:00.0: hdmi content type: Graphics

<7> [171.640731] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [171.640733] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [171.640738] xe 0000:03:00.0: product: Discrete gfx

<7> [171.640740] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [171.640742] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [171.640747] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 07 00 66 10 00 01 00 00 00 00 00 00 00 00

<7> [171.640916] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 05 e3 cd 0c 32 38 45 38 35 30 09 07 07 00 00 00

<7> [171.641079] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [171.641233] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [171.641383] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37

<7> [171.641529] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [171.641669] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [171.641847] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9

<7> [171.641991] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9

<7> [171.642123] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9

<7> [171.642255] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9

<7> [171.642380] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9

<7> [171.642504] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pixel rate 148500, min cdclk 192000, min voltage level 0

<7> [171.642624] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [171.642753] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [171.642873] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0

<7> [171.642990] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [171.643104] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [171.643215] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [171.643321] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [171.643427] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [171.643537] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [171.643646] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [171.643762] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8

<7> [171.643870] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [171.643976] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06

<7> [171.644080] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [171.644185] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [171.644290] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [171.644395] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [171.644506] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [171.644622] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400

<7> [171.644743] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [171.644854] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [171.644966] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [171.645076] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [171.645184] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [171.645291] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [171.645398] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [171.645504] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [171.645610] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [171.645724] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [171.645830] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [171.645938] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [171.646049] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [171.646159] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [171.646267] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [171.646373] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:153:plane 1C] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [171.646481] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [171.646590] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [171.646708] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:183:plane 2C] fb: [NOFB], visible: no

<7> [171.646818] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:213:plane 3C] fb: [NOFB], visible: no

<7> [171.646924] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:243:plane 4C] fb: [NOFB], visible: no

<7> [171.647029] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:253:plane 5C] fb: [NOFB], visible: no

<7> [171.647133] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:263:cursor C] fb: [NOFB], visible: no

<7> [171.647936] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [171.648073] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x88000000)

<7> [171.648195] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F]

<7> [171.648300] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A]

<7> [171.648400] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B]

<7> [171.648499] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C]

<7> [171.648598] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D]

<7> [171.648700] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G]

<7> [171.648795] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A]

<7> [171.648893] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B]

<7> [171.648989] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C]

<7> [171.649082] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D]

<7> [171.649174] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H]

<7> [171.649272] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I]

<7> [171.649368] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A]

<7> [171.649461] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B]

<7> [171.649554] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C]

<7> [171.649648] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D]

<7> [171.658072] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [171.658401] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A)

<7> [171.675011] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x4, on? 0) for [CRTC:269:pipe C]

<7> [171.675341] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3

<7> [171.678046] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe C

<7> [171.697221] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:539:HDMI-A-3][ENCODER:538:DDI TC3/PHY H] Enable audio codec on [CRTC:269:pipe C], 32 bytes ELD

<7> [171.697970] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [171.713878] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000)

<7> [171.714549] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N

<7> [171.715597] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [171.716481] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe C]

<6> [171.723409] [IGT] xe_pm: finished subtest d3hot-mmap-vram, SUCCESS

<7> [171.742372] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0

<6> [171.764443] Console: switching to colour frame buffer device 240x67

Results for igt@xe_pm@d3hot-mmap-vram