Results for igt@kms_plane_scaling@plane-upscale-20x20-with-modifiers@pipe-c

Result: Pass

i915_display_info3 igt_runner3 results3.json results3-xe-load.json guc_logs3.tar i915_display_info_post_exec3 serial_data3 boot3 dmesg3

DetailValue
Duration 1.73 seconds
Hostname
shard-lnl-2
Igt-Version
IGT-Version: 2.4-gaa5853ef5 (x86_64) (Linux: 7.1.0-rc1-lgci-xe-xe-4962-89363c11fcc2fcd06-debug+ x86_64)
Out
Starting dynamic subtest: pipe-C
Trying on eDP-1
Dynamic subtest pipe-C: SUCCESS (1.729s)
Subtest plane-upscale-20x20-with-modifiers: SUCCESS (3.861s)
Err
Starting dynamic subtest: pipe-C
Dynamic subtest pipe-C: SUCCESS (1.729s)
Subtest plane-upscale-20x20-with-modifiers: SUCCESS (3.861s)
Dmesg
<6> [485.115278] [IGT] kms_plane_scaling: starting dynamic subtest pipe-C
<7> [485.119135] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:442]
<7> [485.121573] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [485.122054] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:389:pipe C] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [485.122418] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000
<7> [485.122773] xe 0000:00:02.0: [drm:intel_psr_compute_config [xe]] PSR2 not supported in transcoder C
<7> [485.123054] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:389:pipe C] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [485.123388] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:389:pipe C]
<7> [485.123697] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.enable (expected yes, found no)
<7> [485.124134] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.active (expected yes, found no)
<7> [485.124456] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in cpu_transcoder (expected 1, found -1)
<7> [485.124719] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in lane_count (expected 4, found 0)
<7> [485.125007] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)
<7> [485.125247] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [485.125473] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [485.125692] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [485.125939] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [485.126137] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [485.126335] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [485.126521] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [485.126697] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [485.126896] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [485.127068] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)
<7> [485.127245] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [485.127423] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [485.127580] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)
<7> [485.127736] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)
<7> [485.127889] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [485.128029] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [485.128167] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [485.128305] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [485.128440] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [485.128569] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [485.128696] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [485.128845] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)
<7> [485.128968] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [485.129103] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [485.129245] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)
<7> [485.129368] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)
<7> [485.129488] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [485.129606] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [485.129718] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [485.129853] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [485.129964] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)
<7> [485.130069] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)
<7> [485.130172] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in port_clock (expected 432000, found 0)
<7> [485.130277] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] fastset requirement not met, forcing full modeset
<7> [485.130378] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.enable (expected no, found yes)
<7> [485.130475] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.active (expected no, found yes)
<7> [485.130570] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in cpu_transcoder (expected -1, found 2)
<7> [485.130665] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in lane_count (expected 0, found 4)
<7> [485.130766] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)
<7> [485.130769] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [485.130867] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [485.130930] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [485.130963] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [485.131056] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [485.131053] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [485.131141] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [485.131226] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [485.131312] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [485.131396] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [485.131478] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [485.131560] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [485.131639] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)
<7> [485.131718] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [485.131828] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [485.131925] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)
<7> [485.132019] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)
<7> [485.132100] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [485.132177] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [485.132254] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [485.132330] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [485.132405] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [485.132478] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [485.132552] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [485.132625] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)
<7> [485.132699] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [485.132814] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [485.132912] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)
<7> [485.133006] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)
<7> [485.133089] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [485.133162] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [485.133235] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [485.133308] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [485.133381] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)
<7> [485.133453] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)
<7> [485.133526] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in port_clock (expected 0, found 432000)
<7> [485.133597] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:389:pipe C] fastset requirement not met, forcing full modeset
<7> [485.133671] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:270:pipe B] releasing DPLL 0
<7> [485.133774] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.12: staged scaling request for 20x20->2880x1800 scaler_users = 0x1000
<7> [485.133901] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xd (total dbuf slices 0xf), mbus joined? yes->no
<7> [485.133993] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:270:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x4
<7> [485.134072] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:389:pipe C] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x2 -> 0x4
<7> [485.134141] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:264:cursor B] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0
<7> [485.134200] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:273:plane 1C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [485.134255] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:383:cursor C] ddb ( 0 - 0) -> (2003 - 2048), size 0 -> 45
<7> [485.134310] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [485.134363] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [485.134416] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [485.134468] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [485.134541] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [485.134639] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [485.134738] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [485.134830] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [485.134921] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [485.135010] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [485.135096] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:270:pipe B] min cdclk: 173855 kHz -> 0 kHz
<7> [485.135178] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:389:pipe C] min cdclk: 0 kHz -> 173855 kHz
<7> [485.135310] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:389:pipe C] allocated DPLL 0
<7> [485.135398] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:389:pipe C] reserving DPLL 0
<7> [485.135487] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:273
<7> [485.135554] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: no [modeset]
<7> [485.135655] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:154:plane 1B] fb: [NOFB], visible: no
<7> [485.135755] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:184:plane 2B] fb: [NOFB], visible: no
<7> [485.135865] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:214:plane 3B] fb: [NOFB], visible: no
<7> [485.135971] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:244:plane 4B] fb: [NOFB], visible: no
<7> [485.136079] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:254:plane 5B] fb: [NOFB], visible: no
<7> [485.136179] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:264:cursor B] fb: [NOFB], visible: no
<7> [485.136278] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:389:pipe C] enable: yes [modeset]
<7> [485.136364] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [485.136451] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: C, pipe bpp: 30, dithering: 0
<7> [485.136537] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [485.136622] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [485.136707] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [485.136812] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [485.136914] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [485.137015] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [485.137096] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [485.137173] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [485.137250] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [485.137327] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0
<7> [485.137403] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [485.137479] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 2, length 8
<7> [485.137555] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [485.137632] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [485.137712] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [485.137820] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [485.137923] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [485.138026] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [485.138112] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [485.138195] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [485.138279] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [485.138363] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [485.138446] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [485.138531] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [485.138613] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [485.138697] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [485.138793] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [485.138892] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 173855, min voltage level 0
<7> [485.138991] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [485.139075] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x1000, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0
<7> [485.139150] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0
<7> [485.139225] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [485.139299] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [485.139379] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [485.139459] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [485.139540] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no,
<7> [485.139621] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [485.139702] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [485.139801] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [485.139898] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [485.139993] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [485.140078] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [485.140151] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [485.140225] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [485.140298] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [485.140371] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [485.140444] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [485.140516] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [485.140592] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [485.140672] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [485.140758] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [485.140860] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [485.140955] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [485.141046] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [485.141126] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [485.141205] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [485.141286] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:273:plane 1C] fb: [FB:442] 20x20 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [485.141365] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0
<7> [485.141443] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 20.000000x20.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [485.141521] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:303:plane 2C] fb: [NOFB], visible: no
<7> [485.141598] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:333:plane 3C] fb: [NOFB], visible: no
<7> [485.141676] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:363:plane 4C] fb: [NOFB], visible: no
<7> [485.141761] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:373:plane 5C] fb: [NOFB], visible: no
<7> [485.141868] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:383:cursor C] fb: [NOFB], visible: no
<7> [485.142086] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [485.142187] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [485.142326] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [485.142484] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x82000000)
<7> [485.142663] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [485.142766] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [485.351158] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0
<7> [485.351815] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe B
<7> [485.365125] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off
<7> [485.365597] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [485.366089] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short
<7> [485.366665] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [485.367189] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [485.419079] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [485.419465] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short
<7> [485.427482] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [485.428023] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x2, on? 1) for [CRTC:270:pipe B]
<7> [485.428060] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [485.428620] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [485.429655] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [485.430289] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [485.430888] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A]
<7> [485.431313] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1]
<7> [485.431641] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A]
<7> [485.432070] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B]
<7> [485.432386] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C]
<7> [485.432698] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2]
<7> [485.433060] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A]
<7> [485.433399] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B]
<7> [485.433701] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C]
<7> [485.434060] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3]
<7> [485.434384] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A]
<7> [485.434713] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B]
<7> [485.435110] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C]
<7> [485.435449] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:402:DP-1]
<7> [485.435768] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:414:DP-2]
<7> [485.436091] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:422:DP-3]
<7> [485.436488] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [485.436893] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)
<7> [485.437245] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [485.438873] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x4, on? 0) for [CRTC:389:pipe C]
<7> [485.439365] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [485.441902] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on
<7> [485.442219] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (486 ms remaining)
<7> [485.457031] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [485.457419] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long
<7> [485.457844] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [485.458290] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [485.934967] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [485.965760] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [485.966236] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on
<7> [485.966827] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [486.002505] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [486.002862] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long
<7> [486.003173] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [486.003619] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [486.181289] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [486.181684] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on
<7> [486.182077] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [486.184096] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [486.185630] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [486.186539] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7> [486.187825] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [486.189282] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [486.190467] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK
<7> [486.190881] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [486.192377] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [486.192753] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7> [486.193552] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe C
<7> [486.194081] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [486.194517] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe C
<7> [486.195024] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 4518
<7> [486.196312] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 20480 bytes of contiguous stolen space for FBC, limit: 1
<7> [486.196726] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:273:plane 1C]
<7> [486.210827] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xd
<7> [486.211447] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [486.212013] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x8a000000)
<7> [486.212643] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:270:pipe B]
<7> [486.213170] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [486.214626] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]
<7> [486.215047] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:389:pipe C]
<7> [486.219174] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe C
<7> [486.219537] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:442] from all active usage due to RMFB ioctl
<7> [486.219635] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:273:plane 1C] because [FB:442] is removed
<7> [486.219731] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.12: Staged freeing scaler id 0 scaler_users = 0x0
<7> [486.220036] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:273:plane 1C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [486.220327] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [486.220577] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.220840] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.221063] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.221388] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [486.221720] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [486.222023] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [486.222305] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.222622] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.222905] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [486.223579] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [486.227458] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:273:plane 1C]
<7> [486.245284] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:443]
<7> [486.245547] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.12: staged scaling request for 20x20->2880x1800 scaler_users = 0x1000
<7> [486.246036] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:273:plane 1C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [486.246423] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [486.246782] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [486.247103] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [486.247443] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [486.247815] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [486.248276] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [486.248733] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [486.249232] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.249629] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.250058] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [486.250532] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:273
<7> [486.252389] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 163840 bytes of contiguous stolen space for FBC, limit: 1
<7> [486.252759] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:273:plane 1C]
<7> [486.260830] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [486.262372] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:443] from all active usage due to RMFB ioctl
<7> [486.262464] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:273:plane 1C] because [FB:443] is removed
<7> [486.262519] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.12: Staged freeing scaler id 0 scaler_users = 0x0
<7> [486.262910] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:273:plane 1C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [486.263252] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [486.263506] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.263767] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.264017] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.264304] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [486.264620] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [486.264966] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [486.265265] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.265548] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.265841] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [486.266469] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [486.277559] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:273:plane 1C]
<7> [486.295267] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:443]
<7> [486.295584] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.12: staged scaling request for 20x20->2880x1800 scaler_users = 0x1000
<7> [486.296120] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:273:plane 1C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [486.296524] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [486.296900] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [486.297217] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [486.297563] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [486.297970] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [486.298485] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [486.299013] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [486.299492] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.299982] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.300428] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [486.300931] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:273
<7> [486.302736] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 40960 bytes of contiguous stolen space for FBC, limit: 1
<7> [486.303097] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:273:plane 1C]
<7> [486.310850] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [486.312403] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:443] from all active usage due to RMFB ioctl
<7> [486.312501] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:273:plane 1C] because [FB:443] is removed
<7> [486.312560] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.12: Staged freeing scaler id 0 scaler_users = 0x0
<7> [486.313019] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:273:plane 1C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [486.313363] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [486.313641] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.313938] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.314191] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.314461] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [486.314796] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [486.315133] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [486.315420] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.315709] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.315976] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [486.316571] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [486.327453] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:273:plane 1C]
<7> [486.345066] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:443]
<7> [486.345336] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.13: staged scaling request for 20x20->2880x1800 scaler_users = 0x2000
<7> [486.345842] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:303:plane 2C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [486.346220] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [486.346538] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [486.346904] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [486.347247] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [486.347598] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [486.348056] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [486.348470] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [486.348911] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.349332] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.349741] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [486.350270] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:303
<7> [486.351787] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 20480 bytes of contiguous stolen space for FBC, limit: 1
<7> [486.352148] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:303:plane 2C]
<7> [486.360827] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [486.362416] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:443] from all active usage due to RMFB ioctl
<7> [486.362514] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:303:plane 2C] because [FB:443] is removed
<7> [486.362571] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.13: Staged freeing scaler id 0 scaler_users = 0x0
<7> [486.363034] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:303:plane 2C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [486.363388] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [486.363647] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.363969] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.364207] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.364459] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [486.364821] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [486.365163] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [486.365463] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.365748] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.366023] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [486.366646] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [486.377538] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:303:plane 2C]
<7> [486.396157] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:443]
<7> [486.396679] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.13: staged scaling request for 20x20->2880x1800 scaler_users = 0x2000
<7> [486.397466] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:303:plane 2C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [486.397954] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [486.398362] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [486.398796] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [486.399192] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [486.399667] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [486.400356] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [486.400915] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [486.401461] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.402036] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.402571] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [486.403302] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:303
<7> [486.406129] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 163840 bytes of contiguous stolen space for FBC, limit: 1
<7> [486.406511] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:303:plane 2C]
<7> [486.410851] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [486.412966] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:443] from all active usage due to RMFB ioctl
<7> [486.413146] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:303:plane 2C] because [FB:443] is removed
<7> [486.413270] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.13: Staged freeing scaler id 0 scaler_users = 0x0
<7> [486.413754] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:303:plane 2C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [486.414032] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [486.414256] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.414464] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.414657] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.414924] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [486.415262] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [486.415577] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [486.415921] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.416246] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.416561] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [486.417495] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [486.427598] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:303:plane 2C]
<7> [486.445813] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:443]
<7> [486.446199] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.13: staged scaling request for 20x20->2880x1800 scaler_users = 0x2000
<7> [486.446853] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:303:plane 2C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [486.447240] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [486.447578] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [486.447934] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [486.448250] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [486.448626] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [486.449358] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.13: staged scaling request for 20x20->2880x1800 scaler_users = 0x2000
<7> [486.449751] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:303:plane 2C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [486.450067] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [486.450372] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [486.450675] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [486.451000] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [486.451328] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [486.451897] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [486.452388] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [486.452868] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.453323] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.453801] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [486.454370] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:303
<7> [486.456615] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 40960 bytes of contiguous stolen space for FBC, limit: 1
<7> [486.457007] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:303:plane 2C]
<7> [486.460794] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [486.462128] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:443] from all active usage due to RMFB ioctl
<7> [486.462197] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:303:plane 2C] because [FB:443] is removed
<7> [486.462249] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.13: Staged freeing scaler id 0 scaler_users = 0x0
<7> [486.462480] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:303:plane 2C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [486.462795] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [486.463063] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.463319] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.463460] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.463595] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [486.463800] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [486.463972] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [486.464137] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.464301] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.464462] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [486.466608] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [486.477455] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:303:plane 2C]
<7> [486.495513] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:443]
<7> [486.496038] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.14: staged scaling request for 20x20->2880x1800 scaler_users = 0x4000
<7> [486.496627] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:333:plane 3C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [486.497046] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [486.497390] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [486.497737] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [486.498053] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [486.498394] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [486.499080] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.14: staged scaling request for 20x20->2880x1800 scaler_users = 0x4000
<7> [486.499411] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:333:plane 3C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [486.499689] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [486.500009] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [486.500284] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [486.500553] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [486.500861] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [486.501506] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.14: staged scaling request for 20x20->2880x1800 scaler_users = 0x4000
<7> [486.501851] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:333:plane 3C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [486.502131] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [486.502403] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [486.502671] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [486.502947] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [486.503208] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [486.503624] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [486.504036] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [486.504409] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.504799] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.505139] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [486.505579] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:333
<7> [486.506966] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 20480 bytes of contiguous stolen space for FBC, limit: 1
<7> [486.507215] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:333:plane 3C]
<7> [486.510803] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [486.511966] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:443] from all active usage due to RMFB ioctl
<7> [486.512018] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:333:plane 3C] because [FB:443] is removed
<7> [486.512053] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.14: Staged freeing scaler id 0 scaler_users = 0x0
<7> [486.512202] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:333:plane 3C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [486.512292] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [486.512377] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.512567] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.512811] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.513078] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [486.513453] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [486.513590] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [486.513731] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.513860] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.513986] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [486.514334] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [486.527430] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:333:plane 3C]
<7> [486.545477] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:443]
<7> [486.545880] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.14: staged scaling request for 20x20->2880x1800 scaler_users = 0x4000
<7> [486.546458] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:333:plane 3C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [486.546873] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [486.547210] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [486.547531] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [486.547862] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [486.548241] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [486.548832] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [486.549359] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [486.549897] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.550392] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.550854] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [486.551413] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:333
<7> [486.553529] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 163840 bytes of contiguous stolen space for FBC, limit: 1
<7> [486.553890] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:333:plane 3C]
<7> [486.560806] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [486.562479] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:443] from all active usage due to RMFB ioctl
<7> [486.562605] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:333:plane 3C] because [FB:443] is removed
<7> [486.562733] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.14: Staged freeing scaler id 0 scaler_users = 0x0
<7> [486.563156] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:333:plane 3C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [486.563458] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [486.563672] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.563924] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.564123] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.564353] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [486.564666] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [486.564988] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [486.565264] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.565537] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.565808] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [486.566496] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [486.577418] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:333:plane 3C]
<7> [486.595237] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:443]
<7> [486.595532] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.14: staged scaling request for 20x20->2880x1800 scaler_users = 0x4000
<7> [486.595986] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:333:plane 3C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [486.596294] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [486.596572] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [486.596870] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [486.597141] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [486.597466] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [486.597959] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [486.598418] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [486.598919] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.599370] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.599832] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [486.600383] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:333
<7> [486.602567] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 40960 bytes of contiguous stolen space for FBC, limit: 1
<7> [486.602940] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:333:plane 3C]
<7> [486.610787] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [486.612345] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:443] from all active usage due to RMFB ioctl
<7> [486.612458] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:333:plane 3C] because [FB:443] is removed
<7> [486.612532] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.14: Staged freeing scaler id 0 scaler_users = 0x0
<7> [486.612932] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:333:plane 3C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [486.613193] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [486.613433] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.613656] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.613885] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.614133] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [486.614481] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [486.614818] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [486.615131] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.615439] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.615744] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [486.616450] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [486.627409] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:333:plane 3C]
<7> [486.645141] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:443]
<7> [486.645509] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.15: staged scaling request for 20x20->2880x1800 scaler_users = 0x8000
<7> [486.646018] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:363:plane 4C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [486.646348] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [486.646637] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [486.646953] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [486.647228] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [486.647551] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [486.648054] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [486.648487] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [486.648918] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.649325] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.649754] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [486.650252] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:363
<7> [486.660816] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [486.662474] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:443] from all active usage due to RMFB ioctl
<7> [486.662584] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:363:plane 4C] because [FB:443] is removed
<7> [486.662656] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.15: Staged freeing scaler id 0 scaler_users = 0x0
<7> [486.663029] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:363:plane 4C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [486.663307] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [486.663578] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.663877] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.664142] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.664427] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [486.664891] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [486.665310] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [486.665743] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.666121] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.666493] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [486.667377] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [486.678322] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:443]
<7> [486.678589] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.15: staged scaling request for 20x20->2880x1800 scaler_users = 0x8000
<7> [486.679060] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:363:plane 4C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [486.679358] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [486.679626] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [486.679905] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [486.680144] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [486.680423] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [486.680837] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [486.681195] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [486.681538] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.681881] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.682198] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [486.682601] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:363
<7> [486.694071] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [486.695678] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:443] from all active usage due to RMFB ioctl
<7> [486.695813] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:363:plane 4C] because [FB:443] is removed
<7> [486.695891] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.15: Staged freeing scaler id 0 scaler_users = 0x0
<7> [486.696234] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:363:plane 4C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [486.696482] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [486.696745] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.696980] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.697201] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.697468] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [486.697863] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [486.698224] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [486.698550] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.698879] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.699195] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [486.699943] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [486.711686] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:443]
<7> [486.712015] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.15: staged scaling request for 20x20->2880x1800 scaler_users = 0x8000
<7> [486.712383] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:363:plane 4C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [486.712632] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [486.712900] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [486.713137] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [486.713360] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [486.713629] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [486.714031] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [486.714377] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [486.714726] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.715041] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.715352] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [486.715760] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:363
<7> [486.727436] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [486.729184] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:443] from all active usage due to RMFB ioctl
<7> [486.729299] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:363:plane 4C] because [FB:443] is removed
<7> [486.729386] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.15: Staged freeing scaler id 0 scaler_users = 0x0
<7> [486.729903] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:363:plane 4C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [486.730240] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [486.730474] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.730667] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.730888] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.731135] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [486.731451] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [486.731750] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [486.732007] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.732262] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.732540] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [486.733436] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [486.745109] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:443]
<7> [486.745490] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.16: staged scaling request for 20x20->2880x1800 scaler_users = 0x10000
<7> [486.745998] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:373:plane 5C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [486.746309] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [486.746565] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [486.746846] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [486.747101] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [486.747408] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [486.747826] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [486.748201] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [486.748533] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.748883] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.749207] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [486.749652] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:373
<7> [486.760769] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [486.762632] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:443] from all active usage due to RMFB ioctl
<7> [486.762839] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:373:plane 5C] because [FB:443] is removed
<7> [486.762951] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.16: Staged freeing scaler id 0 scaler_users = 0x0
<7> [486.763410] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:373:plane 5C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [486.763647] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [486.763911] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.764135] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.764336] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.764574] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [486.764965] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [486.765295] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [486.765610] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.765942] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.766224] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [486.767117] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [486.778471] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:443]
<7> [486.778883] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.16: staged scaling request for 20x20->2880x1800 scaler_users = 0x10000
<7> [486.779316] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:373:plane 5C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [486.779595] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [486.779884] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [486.780149] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [486.780399] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [486.780714] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [486.781302] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.16: staged scaling request for 20x20->2880x1800 scaler_users = 0x10000
<7> [486.781583] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:373:plane 5C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [486.781858] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [486.782075] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [486.782283] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [486.782494] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [486.782751] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [486.783084] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [486.783396] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [486.783669] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.783974] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.784245] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [486.784595] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:373
<7> [486.794087] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [486.796001] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:443] from all active usage due to RMFB ioctl
<7> [486.796148] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:373:plane 5C] because [FB:443] is removed
<7> [486.796258] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.16: Staged freeing scaler id 0 scaler_users = 0x0
<7> [486.796606] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:373:plane 5C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [486.796833] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [486.796993] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.797142] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.797277] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.797447] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [486.797704] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [486.797951] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [486.798219] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.798466] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.798716] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [486.799450] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [486.811826] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:443]
<7> [486.812137] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.16: staged scaling request for 20x20->2880x1800 scaler_users = 0x10000
<7> [486.812564] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:373:plane 5C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [486.812885] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [486.813121] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [486.813342] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [486.813557] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [486.813867] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [486.814243] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [486.814582] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [486.814935] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.815257] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.815570] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [486.815994] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:373
<7> [486.827427] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [486.831855] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:443] from all active usage due to RMFB ioctl
<7> [486.831977] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:373:plane 5C] because [FB:443] is removed
<7> [486.832066] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.16: Staged freeing scaler id 0 scaler_users = 0x0
<7> [486.832470] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:373:plane 5C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [486.832761] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [486.833024] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.833269] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.833503] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [486.833860] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [486.834261] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [486.834622] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [486.834982] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.835334] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [486.835648] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [486.836633] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<6> [486.845427] [IGT] kms_plane_scaling: finished subtest pipe-C, SUCCESS
<6> [486.847254] [IGT] kms_plane_scaling: finished subtest plane-upscale-20x20-with-modifiers, SUCCESS
<7> [486.850091] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:443]
<7> [486.852519] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [486.853007] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [486.853310] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000
<7> [486.853631] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [486.854036] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A]
<7> [486.854333] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [486.854602] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [486.854884] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [486.855144] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [486.855388] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)
<7> [486.855621] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [486.855876] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [486.856108] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [486.856297] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [486.856491] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [486.856706] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [486.856917] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [486.857122] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [486.857314] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [486.857513] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)
<7> [486.857831] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [486.858025] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [486.858209] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)
<7> [486.858393] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)
<7> [486.858562] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [486.858740] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [486.858895] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [486.859024] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [486.859164] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [486.859319] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [486.859479] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [486.859634] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)
<7> [486.859801] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [486.859953] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [486.860111] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)
<7> [486.860254] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)
<7> [486.860367] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [486.860481] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [486.860597] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [486.860725] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [486.860843] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)
<7> [486.860949] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)
<7> [486.861054] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 432000)
<7> [486.861160] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [486.861272] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.enable (expected yes, found no)
<7> [486.861391] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.active (expected yes, found no)
<7> [486.861509] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in cpu_transcoder (expected 2, found -1)
<7> [486.861629] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in lane_count (expected 4, found 0)
<7> [486.861860] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)
<7> [486.861979] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [486.862095] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [486.862210] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [486.862323] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [486.862428] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [486.862534] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [486.862638] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [486.862763] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [486.862884] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [486.863000] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)
<7> [486.863116] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [486.863233] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [486.863347] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)
<7> [486.863461] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)
<7> [486.863577] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [486.863702] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [486.863815] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [486.863919] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [486.864023] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [486.864130] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [486.864245] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [486.864364] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)
<7> [486.864481] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [486.864601] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [486.864734] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)
<7> [486.864847] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)
<7> [486.864960] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [486.865076] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [486.865192] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [486.865305] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [486.865411] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)
<7> [486.865515] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)
<7> [486.865619] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in port_clock (expected 432000, found 0)
<7> [486.865739] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:389:pipe C] fastset requirement not met, forcing full modeset
<7> [486.865859] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:389:pipe C] releasing DPLL 0
<7> [486.866063] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xd -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [486.866174] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x4 -> 0x1
<7> [486.866267] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:389:pipe C] dbuf slices 0xc -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x4 -> 0x1
<7> [486.866355] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051
<7> [486.866441] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45
<7> [486.866526] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [486.866606] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [486.866684] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [486.866773] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [486.866852] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:383:cursor C] ddb (2003 - 2048) -> ( 0 - 0), size 45 -> 0
<7> [486.866950] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 1390840 num active planes 1
<7> [486.867078] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [486.867205] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [486.867335] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.867466] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [486.867594] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [486.867734] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 173855 kHz
<7> [486.867865] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:389:pipe C] min cdclk: 173855 kHz -> 0 kHz
<7> [486.868044] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated DPLL 0
<7> [486.868161] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0
<7> [486.868277] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]
<7> [486.868402] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [486.868520] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [486.868636] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [486.868771] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [486.868904] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [486.869030] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [486.869158] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [486.869280] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [486.869404] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [486.869529] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [486.869644] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [486.869782] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0
<7> [486.869899] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [486.870021] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [486.870146] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [486.870272] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [486.870394] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [486.870518] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [486.870639] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [486.870777] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [486.870906] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [486.871029] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [486.871150] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [486.871265] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [486.871378] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [486.871491] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [486.871614] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [486.871749] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [486.871881] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [486.872008] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 173855, min voltage level 0
<7> [486.872132] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [486.872250] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0
<7> [486.872373] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0
<7> [486.872494] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [486.872608] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [486.872730] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [486.872847] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [486.872963] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no,
<7> [486.873084] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [486.873209] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [486.873330] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [486.873452] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [486.873574] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [486.873706] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [486.873835] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [486.873956] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [486.874079] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [486.874192] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [486.874304] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [486.874415] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [486.874534] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [486.874658] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [486.874791] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [486.874920] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [486.875044] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [486.875162] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [486.875281] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [486.875402] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [486.875519] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:394] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [486.875635] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [486.875764] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [486.875886] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [486.876008] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [486.876132] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [486.876259] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [486.876379] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [486.876497] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:389:pipe C] enable: no [modeset]
<7> [486.876621] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:273:plane 1C] fb: [NOFB], visible: no
<7> [486.876754] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:303:plane 2C] fb: [NOFB], visible: no
<7> [486.876874] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:333:plane 3C] fb: [NOFB], visible: no
<7> [486.876985] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:363:plane 4C] fb: [NOFB], visible: no
<7> [486.877096] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:373:plane 5C] fb: [NOFB], visible: no
<7> [486.877207] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:383:cursor C] fb: [NOFB], visible: no
<7> [486.877415] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [486.877614] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x88000000)
<7> [486.877924] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [486.878055] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [487.086747] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0
<7> [487.087397] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe C
<7> [487.095150] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off
<7> [487.095564] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [487.095522] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [487.095971] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [487.096102] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short
<7> [487.147946] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [487.148325] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short
<7> [487.155816] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [487.156180] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x4, on? 1) for [CRTC:389:pipe C]
<7> [487.156245] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [487.156813] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [487.157660] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [487.158172] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [487.158626] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A]
<7> [487.158962] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1]
<7> [487.159248] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A]
<7> [487.159522] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B]
<7> [487.159833] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C]
<7> [487.160130] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2]
<7> [487.160411] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A]
<7> [487.160719] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B]
<7> [487.161003] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C]
<7> [487.161274] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3]
<7> [487.161549] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A]
<7> [487.161839] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B]
<7> [487.162102] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C]
<7> [487.162439] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [487.162928] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)
<7> [487.163204] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7> [487.163533] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [487.164808] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]
<7> [487.165266] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [487.167744] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on
<7> [487.168096] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (489 ms remaining)
<7> [487.185779] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [487.186122] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long
<7> [487.186481] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [487.186969] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [487.663010] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [487.745384] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [487.746196] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on
<7> [487.746821] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [487.782465] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [487.782829] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long
<7> [487.783155] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [487.783638] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [487.960199] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [487.961070] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on
<7> [487.961716] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [487.964457] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [487.966330] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [487.967529] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7> [487.969157] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [487.970903] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [487.972365] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK
<7> [487.972973] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [487.974808] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [487.975375] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7> [487.976535] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [487.977371] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [487.977911] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7> [487.978521] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 4518
<7> [487.994383] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [487.996738] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]
<7> [487.997318] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<7> [488.000851] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [488.001471] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xa8000000)
<7> [488.002122] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [488.002756] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:389:pipe C]
<7> [488.003412] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [488.005716] [IGT] kms_plane_scaling: exiting, ret=0
<6> [488.011270] Console: switching to colour frame buffer device 180x56
Created at 2026-05-01 11:25:47