Results for igt@kms_force_connector_basic@force-edid

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.4-gaa5853ef5 (x86_64) (Linux: 7.1.0-rc1-lgci-xe-xe-4961-5664aa7084dc7c290-debug+ x86_64)
Out 
Using IGT_SRANDOM=1777595801 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.027s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.027s)
Dmesg
<6> [871.052729] Console: switching to colour dummy device 80x25
<6> [871.053246] [IGT] kms_force_connector_basic: executing
<7> [871.060145] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:552:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [871.060169] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [871.060184] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [871.064597] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [871.064668] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [871.064699] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [871.069069] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [871.069110] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [871.069118] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [871.073417] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<6> [871.073880] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [871.074526] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:552:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [871.074539] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [871.074548] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [871.075003] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [871.075230] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [871.075607] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [871.075851] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [871.075878] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [871.076101] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [871.078397] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [871.078414] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [871.078651] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] status updated from disconnected to connected
<7> [871.078811] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] probed modes:
<7> [871.078820] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [871.078830] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [871.078839] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [871.078847] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [871.078854] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [871.078888] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [871.079036] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [871.079106] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [871.079116] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [871.079514] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [871.079773] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [871.080163] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [871.080401] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [871.080419] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [871.080653] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [871.082991] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [871.083009] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [871.083416] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] probed modes:
<7> [871.083426] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [871.083436] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [871.083444] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [871.083452] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [871.083460] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [871.083983] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:552:HDMI-A-1] EDID override set
<7> [871.084041] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [871.084051] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [871.084791] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:552:HDMI-A-1] ELD monitor IGT
<7> [871.084803] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:552:HDMI-A-1] ELD size 24, SAD count 0
<7> [871.084985] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [871.085233] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [871.085622] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [871.085880] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [871.086156] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [871.086180] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [871.086196] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] probed modes:
<7> [871.086205] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [871.086214] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [871.086222] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [871.086230] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [871.086238] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [871.086529] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:552:HDMI-A-1] EDID override reset
<7> [871.086853] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [871.086863] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [871.087301] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [871.087539] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [871.087952] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [871.088212] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [871.088230] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [871.088486] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [871.090834] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [871.090853] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [871.091116] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:552:HDMI-A-1] EDID changed, epoch counter 2
<7> [871.091280] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [871.091304] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [871.091323] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] probed modes:
<7> [871.091333] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [871.091342] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [871.091351] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [871.091359] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [871.091368] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [871.091794] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:552:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [871.091807] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [871.091819] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [871.096174] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] status updated from connected to disconnected
<7> [871.096199] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [871.096270] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [871.096410] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [871.096481] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [871.096492] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [871.100883] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<6> [871.101541] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [871.105392] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [871.106576] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [871.115796] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [871.115813] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [871.115941] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1]
<7> [871.115957] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:eDP-1]
<7> [871.116787] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [871.117451] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [871.117850] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [871.118252] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [871.118697] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [871.118716] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [871.118728] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [871.118740] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD monitor
<7> [871.118752] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD size 20, SAD count 0
<7> [871.118804] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] VRR capable: yes
<7> [871.119150] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [871.119489] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [871.120280] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] probed modes:
<7> [871.120292] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [871.120303] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [871.120315] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1]
<7> [871.120327] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:521:DP-1]
<7> [871.120743] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1] disconnected
<7> [871.120754] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]
<7> [871.120764] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:534:DP-2]
<7> [871.121153] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected
<7> [871.121164] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [871.121173] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [871.121568] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [871.121578] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [871.121588] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [871.126051] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [871.126061] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:512:eDP-1] enabled? yes
<7> [871.126071] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:521:DP-1] enabled? no
<7> [871.126078] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no
<7> [871.126084] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no
<7> [871.126090] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:552:HDMI-A-1] enabled? no
<7> [871.126142] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [871.126174] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:512:eDP-1] found preferred mode: 1920x1200
<7> [871.126183] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config
<7> [871.126214] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 1920x1200 set (0,0)
<7> [871.132460] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [871.134195] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:512:eDP-1] force updated from 0 to 0 or reprobing
<7> [871.134206] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1]
<7> [871.134216] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:eDP-1]
<7> [871.134934] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [871.135500] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [871.135851] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [871.136200] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [871.136553] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [871.136566] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [871.136576] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [871.136586] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD monitor
<7> [871.136596] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD size 20, SAD count 0
<7> [871.136628] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] VRR capable: yes
<7> [871.136970] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [871.137273] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [871.137975] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] probed modes:
<7> [871.137985] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [871.137995] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [871.138051] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1]
<7> [871.138060] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:eDP-1]
<7> [871.138773] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [871.139313] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [871.139610] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [871.139981] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [871.140338] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [871.140349] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [871.140358] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [871.140367] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD monitor
<7> [871.140376] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD size 20, SAD count 0
<7> [871.140404] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] VRR capable: yes
<7> [871.140726] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [871.141017] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [871.141701] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] probed modes:
<7> [871.141710] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [871.141720] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [871.141938] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:512:eDP-1] EDID override reset
<7> [871.141982] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1]
<7> [871.141991] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:eDP-1]
<7> [871.142707] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [871.143260] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [871.143592] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [871.143941] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [871.144271] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [871.144285] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [871.144296] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [871.144308] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD monitor
<7> [871.144320] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD size 20, SAD count 0
<7> [871.144354] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] VRR capable: yes
<7> [871.144721] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [871.145008] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [871.145668] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] probed modes:
<7> [871.145691] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [871.145700] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [871.145921] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:521:DP-1] EDID override reset
<7> [871.145958] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1]
<7> [871.145967] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:521:DP-1]
<7> [871.146301] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1] disconnected
<7> [871.146497] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:534:DP-2] EDID override reset
<7> [871.146533] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]
<7> [871.146542] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:534:DP-2]
<7> [871.147059] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected
<7> [871.147261] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:543:DP-3] EDID override reset
<7> [871.147296] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [871.147304] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [871.147628] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [871.147983] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:552:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [871.147994] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [871.148005] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [871.149797] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [871.150322] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [871.150711] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [871.152374] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [871.152427] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [871.152436] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [871.156927] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [871.157102] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:552:HDMI-A-1] EDID override reset
<7> [871.157137] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [871.157146] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [871.161517] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [871.163338] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [871.163652] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [871.165856] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [871.166541] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [871.174162] Console: switching to colour frame buffer device 240x75
Created at 2026-05-01 00:54:13