Results for igt@xe_pm@d3hot-mmap-vram

Result: Pass

i915_display_info13 igt_runner13 results13.json results13-xe-load.json guc_logs13.tar i915_display_info_post_exec13 serial_data13 boot13 dmesg13

DetailValue
Duration 13.68 seconds
Hostname
shard-bmg-4
Igt-Version
IGT-Version: 2.4-gaa5853ef5 (x86_64) (Linux: 7.1.0-rc1-lgci-xe-xe-4960-6472756e8384e3945-debug+ x86_64)
Out
Using IGT_SRANDOM=1777611672 for randomisation
Opened device: /dev/dri/card0
Starting subtest: d3hot-mmap-vram
Subtest d3hot-mmap-vram: SUCCESS (13.680s)
Err
Starting subtest: d3hot-mmap-vram
Subtest d3hot-mmap-vram: SUCCESS (13.680s)
Dmesg
<6> [161.513384] Console: switching to colour dummy device 80x25
<6> [161.513668] [IGT] xe_pm: executing
<6> [161.581619] [IGT] xe_pm: starting subtest d3hot-mmap-vram
<7> [161.582933] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000
<7> [161.583231] xe 0000:03:00.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000
<7> [161.583478] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0
<7> [161.583735] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A]
<7> [161.583992] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [161.584272] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [161.584528] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2
<7> [161.584979] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000
<7> [161.585253] xe 0000:03:00.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000
<7> [161.585509] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0
<7> [161.585784] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A]
<7> [161.586060] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [161.586572] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [161.586847] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2
<7> [161.587304] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xd (total dbuf slices 0xf), mbus joined? no->no
<7> [161.587525] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x5 -> 0x4
<7> [161.587904] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000
<7> [161.588154] xe 0000:03:00.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000
<7> [161.588394] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0
<7> [161.588654] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A]
<7> [161.588898] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [161.589138] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [161.589358] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2
<7> [161.589598] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xd (total dbuf slices 0xf), mbus joined? no->no
<7> [161.589776] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x5 -> 0x4
<7> [161.589974] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0
<7> [161.590164] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0
<7> [161.590322] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [161.590487] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [161.590636] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [161.590779] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [161.590940] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [161.591229] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [161.591421] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [161.591596] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [161.591798] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz
<7> [161.591986] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated TC PLL 2
<7> [161.592239] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving TC PLL 2
<7> [161.592398] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]
<7> [161.592576] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB
<7> [161.592738] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0
<7> [161.592893] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [161.593045] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [161.593202] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [161.593349] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [161.593493] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64
<7> [161.593627] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [161.593758] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled
<7> [161.593889] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [161.594017] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [161.594149] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0
<7> [161.594275] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0
<7> [161.594401] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00
<7> [161.594526] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11
<7> [161.594647] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00
<7> [161.594772] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [161.594893] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [161.595015] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36
<7> [161.595170] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125
<7> [161.595280] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [161.595392] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [161.595501] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [161.595609] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [161.595711] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [161.595813] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [161.595911] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pixel rate 148500, min cdclk 192000, min voltage level 0
<7> [161.596009] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0
<7> [161.596111] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0
<7> [161.596209] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0
<7> [161.596313] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [161.596416] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [161.596515] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [161.596613] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [161.596711] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:
<7> [161.596809] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000
<7> [161.596913] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [161.597015] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c
<7> [161.597118] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110
<7> [161.597216] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c
<7> [161.597313] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1
<7> [161.597410] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a
<7> [161.597510] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81
<7> [161.597612] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000
<7> [161.597714] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001
<7> [161.597816] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000
<7> [161.597921] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000
<7> [161.598022] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000
<7> [161.598124] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00
<7> [161.598225] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [161.598323] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [161.598421] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [161.598519] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [161.598616] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [161.598714] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [161.598811] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [161.598908] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [161.599005] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [161.599106] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [161.599203] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [161.599301] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [161.599398] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no
<7> [161.599496] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [161.599594] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [161.599691] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [161.599795] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [161.599899] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [161.599998] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [161.600419] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G] Disable audio codec on [CRTC:151:pipe A]
<7> [161.634024] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7> [161.651353] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [161.654154] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:151:pipe A]
<7> [161.656614] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2
<7> [161.657465] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F]
<7> [161.657956] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A]
<7> [161.658485] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B]
<7> [161.658943] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C]
<7> [161.659432] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D]
<7> [161.659868] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G]
<7> [161.660295] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A]
<7> [161.660706] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B]
<7> [161.661092] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C]
<7> [161.661487] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D]
<7> [161.661842] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H]
<7> [161.662191] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I]
<7> [161.662508] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A]
<7> [161.662835] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B]
<7> [161.663148] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C]
<7> [161.663441] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D]
<7> [161.665569] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)
<7> [161.665983] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xd
<7> [161.666711] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [161.666956] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x8a000000)
<7> [161.667419] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:527:DP-2]
<7> [161.667632] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<7> [161.668409] xe 0000:03:00.0: [drm:intel_hdmi_compute_output_format [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)
<7> [161.668605] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] hw max bpp: 36, pipe bpp: 36, dithering: 0
<7> [161.668801] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe C]
<7> [161.668989] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe C] fastset requirement not met in hw.active (expected yes, found no)
<7> [161.669187] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] fastset requirement not met, forcing full modeset
<7> [161.669360] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe C] releasing TC PLL 3
<7> [161.669616] xe 0000:03:00.0: [drm:intel_hdmi_compute_output_format [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)
<7> [161.669767] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] hw max bpp: 36, pipe bpp: 36, dithering: 0
<7> [161.669932] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe C]
<7> [161.670090] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe C] fastset requirement not met in hw.active (expected yes, found no)
<7> [161.670260] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] fastset requirement not met, forcing full modeset
<7> [161.670414] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe C] releasing TC PLL 3
<7> [161.670619] xe 0000:03:00.0: [drm:intel_hdmi_compute_output_format [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)
<7> [161.670749] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] hw max bpp: 36, pipe bpp: 36, dithering: 0
<7> [161.670886] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe C]
<7> [161.671021] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe C] fastset requirement not met in hw.active (expected yes, found no)
<7> [161.671158] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] fastset requirement not met, forcing full modeset
<7> [161.671284] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe C] releasing TC PLL 3
<7> [161.671421] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xd -> 0x1 (total dbuf slices 0xf), mbus joined? no->no
<7> [161.671520] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe C] dbuf slices 0xc -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x4 -> 0x0
<7> [161.671635] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:153:plane 1C] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0
<7> [161.671723] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:263:cursor C] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0
<7> [161.671810] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [161.671897] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [161.671980] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [161.672061] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [161.672158] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe C] data rate 0 num active planes 0
<7> [161.672272] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [161.672385] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [161.672492] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [161.672616] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz
<7> [161.672728] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:269:pipe C] allocated TC PLL 3
<7> [161.672829] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:269:pipe C] reserving TC PLL 3
<7> [161.672930] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe C] enable: yes [modeset]
<7> [161.673039] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB
<7> [161.673154] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: C, pipe bpp: 36, dithering: 0
<7> [161.673255] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [161.673354] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [161.673452] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [161.673557] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [161.673659] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71
<7> [161.673760] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6
<7> [161.673858] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13
<7> [161.673860] xe 0000:03:00.0: colorspace: RGB
<7> [161.673862] xe 0000:03:00.0: scan mode: Underscan
<7> [161.673863] xe 0000:03:00.0: colorimetry: No Data
<7> [161.673864] xe 0000:03:00.0: picture aspect: 16:9
<7> [161.673866] xe 0000:03:00.0: active aspect: Same as Picture
<7> [161.673867] xe 0000:03:00.0: itc: No Data
<7> [161.673868] xe 0000:03:00.0: extended colorimetry: xvYCC 601
<7> [161.673869] xe 0000:03:00.0: quantization range: Default
<7> [161.673870] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling
<7> [161.673871] xe 0000:03:00.0: video code: 16
<7> [161.673873] xe 0000:03:00.0: ycc quantization range: Full
<7> [161.673874] xe 0000:03:00.0: hdmi content type: Graphics
<7> [161.673875] xe 0000:03:00.0: pixel repeat: 0
<7> [161.673876] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0
<7> [161.673878] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25
<7> [161.673879] xe 0000:03:00.0: vendor: Intel
<7> [161.673880] xe 0000:03:00.0: product: Discrete gfx
<7> [161.673882] xe 0000:03:00.0: source device information: PC General (0x9)
<7> [161.673883] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4
<7> [161.673884] xe 0000:03:00.0: empty frame
<7> [161.673886] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00
<7> [161.673987] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51
<7> [161.674088] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00
<7> [161.674198] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [161.674297] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [161.674396] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36
<7> [161.674497] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125
<7> [161.674595] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [161.674694] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [161.674797] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [161.674900] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [161.675001] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [161.675106] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [161.675206] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pixel rate 148500, min cdclk 192000, min voltage level 0
<7> [161.675304] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0
<7> [161.675402] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0
<7> [161.675499] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0
<7> [161.675599] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [161.675697] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [161.675794] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [161.675891] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [161.675988] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:
<7> [161.676086] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000
<7> [161.676194] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [161.676292] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8
<7> [161.676388] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20
<7> [161.676485] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06
<7> [161.676581] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c
<7> [161.676679] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000
<7> [161.676776] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000
<7> [161.676872] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200
<7> [161.676968] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff
<7> [161.677064] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400
<7> [161.677170] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000
<7> [161.677274] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001
<7> [161.677376] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00
<7> [161.677477] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [161.677576] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [161.677674] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [161.677770] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [161.677869] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [161.677972] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [161.678075] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [161.678181] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [161.678283] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [161.678388] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [161.678494] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [161.678599] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [161.678700] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:153:plane 1C] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no
<7> [161.678808] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [161.678912] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:183:plane 2C] fb: [NOFB], visible: no
<7> [161.679015] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:213:plane 3C] fb: [NOFB], visible: no
<7> [161.679142] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:243:plane 4C] fb: [NOFB], visible: no
<7> [161.679244] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:253:plane 5C] fb: [NOFB], visible: no
<7> [161.679344] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:263:cursor C] fb: [NOFB], visible: no
<7> [161.680013] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:539:HDMI-A-3][ENCODER:538:DDI TC3/PHY H] Disable audio codec on [CRTC:269:pipe C]
<7> [161.705219] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe C
<7> [161.721361] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x4, on? 1) for [CRTC:269:pipe C]
<7> [161.723968] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3
<7> [161.724881] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F]
<7> [161.725451] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A]
<7> [161.725964] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B]
<7> [161.726508] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C]
<7> [161.726989] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D]
<7> [161.727460] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G]
<7> [161.727876] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A]
<7> [161.728330] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B]
<7> [161.728724] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C]
<7> [161.729132] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D]
<7> [161.729509] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H]
<7> [161.729848] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I]
<7> [161.730201] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A]
<7> [161.730524] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B]
<7> [161.730864] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C]
<7> [161.731199] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D]
<7> [161.731726] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)
<7> [161.732204] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [161.732985] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [161.733507] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xaa000000)
<7> [161.734010] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [161.734489] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:539:HDMI-A-3]
<7> [161.734723] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe C]
<7> [161.754142] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [161.755016] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [161.755852] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [161.756622] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [161.757403] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [163.066328] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [163.067026] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]
<7> [163.071953] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]
<7> [163.076620] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]
<7> [163.077456] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [163.079407] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [163.080301] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [163.084934] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [163.098890] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [163.101313] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [163.103212] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000
<7> [163.108669] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11
<7> [163.110473] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST
<7> [163.121802] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [163.122051] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000
<7> [163.122305] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000
<7> [163.128785] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [163.130703] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [163.132619] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [163.134542] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [163.136490] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [163.138479] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [163.140520] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [163.142527] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [163.146530] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [163.148494] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [163.150455] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [163.152491] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [163.154489] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [163.156467] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [163.158505] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [163.160551] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [163.162262] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz
<7> [163.162280] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.
<7> [163.162289] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.
<7> [163.162296] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.
<7> [163.162303] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.
<7> [163.162310] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.
<7> [163.162320] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435
<7> [163.162328] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
<7> [163.162337] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3
<7> [163.162373] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no
<7> [163.162597] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps
<7> [163.164288] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [163.164533] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [163.166205] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]
<7> [163.166782] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [163.166878] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [163.167328] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [163.167424] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [163.167428] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [163.167520] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [163.168876] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [163.168879] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [163.168980] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]
<7> [163.193954] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz
<7> [163.193958] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.
<7> [163.193961] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.
<7> [163.193964] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.
<7> [163.193967] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.
<7> [163.193970] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.
<7> [163.193973] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV
<7> [163.193976] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
<7> [163.193980] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3
<7> [163.194348] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [163.194446] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [163.194892] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [163.194983] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [163.194996] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [163.199460] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]
<7> [163.274259] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [163.275277] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [163.276409] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [163.277464] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [163.278399] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [164.494186] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [164.494915] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]
<7> [164.499722] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]
<7> [164.504378] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]
<7> [164.504899] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [164.505635] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [164.506355] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [164.510124] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [164.520650] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [164.522363] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [164.523870] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000
<7> [164.527938] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11
<7> [164.529313] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST
<7> [164.539014] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [164.539376] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000
<7> [164.539479] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000
<7> [164.545336] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [164.547156] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [164.549029] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [164.550863] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [164.552816] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [164.554823] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [164.556680] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [164.558674] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [164.562461] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [164.564289] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [164.566115] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [164.567944] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [164.569789] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [164.571773] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [164.573791] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [164.575788] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [164.577579] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz
<7> [164.577598] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.
<7> [164.577608] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.
<7> [164.577618] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.
<7> [164.577627] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.
<7> [164.577637] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.
<7> [164.577650] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435
<7> [164.577661] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
<7> [164.577673] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3
<7> [164.577715] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no
<7> [164.578079] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps
<7> [164.579488] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [164.579787] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [164.581134] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]
<7> [164.581681] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [164.581843] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [164.582182] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [164.582273] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [164.582277] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [164.582367] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [164.583608] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [164.583611] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [164.583703] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]
<7> [164.608564] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz
<7> [164.608569] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.
<7> [164.608572] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.
<7> [164.608575] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.
<7> [164.608578] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.
<7> [164.608581] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.
<7> [164.608585] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV
<7> [164.608588] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
<7> [164.608592] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3
<7> [164.608852] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [164.608952] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [164.609295] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [164.609393] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [164.609406] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [164.613623] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]
<7> [164.682381] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [164.683263] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [164.683973] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [164.684701] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [164.685409] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [166.024231] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [166.024941] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]
<7> [166.029984] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]
<7> [166.034705] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]
<7> [166.035253] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [166.035898] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [166.036601] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [166.040851] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [166.055215] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [166.057663] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [166.059770] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000
<7> [166.064954] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11
<7> [166.066477] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST
<7> [166.075842] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [166.076023] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000
<7> [166.076192] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000
<7> [166.082339] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [166.084332] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [166.086299] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [166.088213] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [166.090233] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [166.092266] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [166.094306] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [166.096343] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [166.100460] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [166.102416] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [166.104405] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [166.106450] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [166.108464] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [166.110395] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [166.112471] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [166.114424] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [166.116161] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz
<7> [166.116179] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.
<7> [166.116188] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.
<7> [166.116195] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.
<7> [166.116201] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.
<7> [166.116208] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.
<7> [166.116216] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435
<7> [166.116224] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
<7> [166.116232] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3
<7> [166.116261] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no
<7> [166.116506] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps
<7> [166.118144] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [166.118352] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [166.119965] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]
<7> [166.120547] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [166.120650] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [166.121091] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [166.121185] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [166.121189] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [166.121282] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [166.122650] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [166.122653] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [166.122751] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]
<7> [166.147727] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz
<7> [166.147731] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.
<7> [166.147734] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.
<7> [166.147737] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.
<7> [166.147740] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.
<7> [166.147743] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.
<7> [166.147746] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV
<7> [166.147749] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
<7> [166.147753] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3
<7> [166.148123] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [166.148216] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [166.148665] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [166.148759] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [166.148772] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [166.152976] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]
<7> [166.226284] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [166.227291] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [166.228394] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [166.229273] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [166.230062] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [167.548480] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [167.549219] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]
<7> [167.553836] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]
<7> [167.558589] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]
<7> [167.559422] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [167.560377] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [167.561353] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [167.565888] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [167.580217] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [167.582366] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [167.584319] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000
<7> [167.589756] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11
<7> [167.591565] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST
<7> [167.602773] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [167.603040] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000
<7> [167.603185] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000
<7> [167.609670] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [167.611581] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [167.613524] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [167.615452] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [167.617393] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [167.619395] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [167.621387] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [167.623370] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [167.627414] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [167.629387] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [167.631433] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [167.633391] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [167.635370] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [167.637362] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [167.639358] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [167.641399] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [167.643159] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz
<7> [167.643176] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.
<7> [167.643183] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.
<7> [167.643190] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.
<7> [167.643196] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.
<7> [167.643203] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.
<7> [167.643211] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435
<7> [167.643219] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
<7> [167.643227] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3
<7> [167.643256] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no
<7> [167.643510] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps
<7> [167.645225] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [167.645433] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [167.647063] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]
<7> [167.647610] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [167.647722] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [167.648168] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [167.648259] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [167.648263] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [167.648352] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [167.649701] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [167.649704] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [167.649796] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]
<7> [167.674770] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz
<7> [167.674774] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.
<7> [167.674777] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.
<7> [167.674780] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.
<7> [167.674783] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.
<7> [167.674786] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.
<7> [167.674789] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV
<7> [167.674792] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
<7> [167.674796] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3
<7> [167.675159] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [167.675256] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [167.675705] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [167.675795] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [167.675808] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [167.680028] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]
<7> [167.754251] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [167.755263] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [167.756071] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [167.756842] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [167.757625] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [169.071694] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [169.072463] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]
<7> [169.077219] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]
<7> [169.081813] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]
<7> [169.082436] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [169.083245] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [169.084035] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [169.087783] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [169.098389] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [169.100256] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [169.101692] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000
<7> [169.105578] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11
<7> [169.106972] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST
<7> [169.116376] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [169.116779] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000
<7> [169.116909] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000
<7> [169.122809] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [169.124634] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [169.126463] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [169.128454] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [169.130450] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [169.132443] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [169.134432] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [169.136441] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [169.140500] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [169.142497] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [169.144494] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [169.146505] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [169.148529] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [169.150577] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [169.152595] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [169.154455] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [169.156272] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz
<7> [169.156305] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.
<7> [169.156320] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.
<7> [169.156332] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.
<7> [169.156345] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.
<7> [169.156358] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.
<7> [169.156375] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435
<7> [169.156390] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
<7> [169.156406] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3
<7> [169.156459] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no
<7> [169.156659] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps
<7> [169.158003] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [169.158368] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [169.159575] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]
<7> [169.160234] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [169.160337] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [169.160679] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [169.160772] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [169.160776] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [169.160868] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [169.162117] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [169.162120] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [169.162217] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]
<7> [169.187083] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz
<7> [169.187087] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.
<7> [169.187090] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.
<7> [169.187093] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.
<7> [169.187095] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.
<7> [169.187098] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.
<7> [169.187102] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV
<7> [169.187105] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
<7> [169.187108] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3
<7> [169.187368] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [169.187460] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [169.187797] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [169.187890] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [169.187903] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [169.192108] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]
<7> [169.266248] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [169.267936] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [169.268804] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [169.269553] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [169.270282] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [170.797194] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [170.797894] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]
<7> [170.802273] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]
<7> [170.806854] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]
<7> [170.807702] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [170.808661] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [170.809554] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [170.813791] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [170.828271] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [170.830541] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [170.832488] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000
<7> [170.837884] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11
<7> [170.839715] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST
<7> [170.851739] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [170.852006] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000
<7> [170.852251] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000
<7> [170.858670] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [170.860602] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [170.862539] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [170.864482] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [170.866486] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [170.868408] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [170.870375] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [170.872293] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [170.876417] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [170.878362] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [170.880301] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [170.882283] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [170.884227] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [170.886229] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [170.888214] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [170.890151] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [170.891989] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz
<7> [170.892009] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.
<7> [170.892017] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.
<7> [170.892024] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.
<7> [170.892031] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.
<7> [170.892039] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.
<7> [170.892048] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435
<7> [170.892057] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
<7> [170.892066] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3
<7> [170.892099] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no
<7> [170.892382] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps
<7> [170.894100] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [170.894330] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [170.896008] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]
<7> [170.896574] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [170.896669] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [170.897111] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [170.897204] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [170.897208] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [170.897299] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [170.898657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [170.898660] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [170.898757] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]
<7> [170.923726] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz
<7> [170.923730] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.
<7> [170.923733] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.
<7> [170.923736] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.
<7> [170.923739] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.
<7> [170.923742] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.
<7> [170.923745] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV
<7> [170.923748] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
<7> [170.923752] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3
<7> [170.924123] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [170.924217] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [170.924658] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [170.924748] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [170.924761] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [170.928873] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]
<7> [171.002224] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [171.003230] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [171.004091] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [171.004872] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [171.005714] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [172.117645] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [172.118398] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]
<7> [172.123168] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]
<7> [172.128128] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]
<7> [172.128933] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [172.129771] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [172.130592] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [172.134759] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [172.149017] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [172.151418] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [172.153060] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000
<7> [172.158144] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11
<7> [172.160016] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST
<7> [172.170320] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [172.170542] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000
<7> [172.170764] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000
<7> [172.177115] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [172.179137] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [172.181161] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [172.183183] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [172.185148] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [172.187172] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [172.189199] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [172.191217] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [172.195413] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [172.197336] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [172.199275] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [172.201249] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [172.203257] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [172.205272] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [172.207273] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [172.209311] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [172.211046] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz
<7> [172.211061] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.
<7> [172.211068] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.
<7> [172.211074] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.
<7> [172.211079] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.
<7> [172.211085] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.
<7> [172.211093] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435
<7> [172.211100] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
<7> [172.211107] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3
<7> [172.211134] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no
<7> [172.211365] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps
<7> [172.213050] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [172.213243] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [172.214866] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]
<7> [172.215419] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [172.215581] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [172.216028] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [172.216126] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [172.216130] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [172.216226] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [172.217584] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [172.217587] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [172.217684] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]
<7> [172.242698] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz
<7> [172.242702] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.
<7> [172.242705] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.
<7> [172.242708] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.
<7> [172.242711] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.
<7> [172.242714] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.
<7> [172.242717] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV
<7> [172.242720] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
<7> [172.242724] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3
<7> [172.243093] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [172.243189] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [172.243637] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [172.243727] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [172.243740] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [172.247857] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]
<7> [172.322124] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [172.323146] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [172.323992] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [172.324767] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [172.325599] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [173.438649] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [173.439330] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]
<7> [173.444595] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]
<7> [173.449605] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]
<7> [173.450343] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [173.451127] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [173.451895] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [173.456491] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [173.470372] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [173.472769] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [173.474767] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000
<7> [173.480295] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11
<7> [173.482049] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST
<7> [173.492938] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [173.493188] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000
<7> [173.493360] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000
<7> [173.499581] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [173.501501] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [173.503413] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [173.505330] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [173.507309] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [173.509268] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [173.511247] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [173.513269] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [173.517461] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [173.519389] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [173.521309] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [173.523271] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [173.525241] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [173.527323] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [173.529246] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [173.531275] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [173.533050] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz
<7> [173.533066] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.
<7> [173.533073] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.
<7> [173.533079] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.
<7> [173.533085] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.
<7> [173.533092] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.
<7> [173.533099] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435
<7> [173.533107] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
<7> [173.533114] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3
<7> [173.533142] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no
<7> [173.533387] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps
<7> [173.535033] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [173.535231] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [173.536862] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]
<7> [173.537404] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [173.537500] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [173.537947] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [173.538046] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [173.538050] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [173.538143] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [173.539502] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [173.539505] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [173.539598] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]
<7> [173.564564] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz
<7> [173.564569] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.
<7> [173.564572] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.
<7> [173.564575] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.
<7> [173.564577] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.
<7> [173.564580] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.
<7> [173.564584] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV
<7> [173.564587] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
<7> [173.564591] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3
<7> [173.564959] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [173.565053] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [173.565498] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [173.565588] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [173.565601] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [173.569717] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]
<7> [173.642011] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [173.643060] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [173.643896] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [173.644673] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [173.645491] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [174.964624] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [174.965367] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]
<7> [174.970192] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]
<7> [174.974768] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]
<7> [174.975494] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [174.976335] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [174.977157] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [174.980940] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [174.991520] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [174.993334] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [174.994796] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000
<7> [174.998917] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11
<7> [175.000279] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST
<7> [175.009722] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [175.010151] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000
<7> [175.010270] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000
<7> [175.016333] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [175.018173] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [175.020007] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [175.021882] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [175.023883] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [175.025715] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [175.027704] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [175.029696] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [175.033608] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [175.035613] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [175.037621] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [175.039630] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [175.041632] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [175.043651] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [175.045488] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [175.047329] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [175.049083] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz
<7> [175.049098] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.
<7> [175.049106] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.
<7> [175.049114] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.
<7> [175.049121] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.
<7> [175.049130] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.
<7> [175.049139] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435
<7> [175.049149] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
<7> [175.049158] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3
<7> [175.049193] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no
<7> [175.049508] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps
<7> [175.050811] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [175.051241] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [175.052858] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]
<7> [175.053502] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [175.053598] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [175.053941] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [175.054037] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [175.054041] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [175.054134] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [175.055378] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [175.055381] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [175.055472] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]
<7> [175.080326] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz
<7> [175.080330] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.
<7> [175.080333] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.
<7> [175.080336] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.
<7> [175.080338] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.
<7> [175.080341] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.
<7> [175.080345] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV
<7> [175.080348] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
<7> [175.080352] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3
<7> [175.080611] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [175.080707] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [175.081051] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [175.081144] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [175.081157] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [175.085288] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]
<7> [175.089625] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000
<7> [175.089735] xe 0000:03:00.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000
<7> [175.089857] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0
<7> [175.089965] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A]
<7> [175.090072] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [175.090180] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [175.090283] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2
<7> [175.090476] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000
<7> [175.090577] xe 0000:03:00.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000
<7> [175.090678] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0
<7> [175.090787] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A]
<7> [175.090905] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [175.091008] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [175.091110] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2
<7> [175.091237] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [175.091322] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1
<7> [175.091471] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000
<7> [175.091573] xe 0000:03:00.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000
<7> [175.091674] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0
<7> [175.091778] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A]
<7> [175.091896] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [175.092001] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [175.092108] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2
<7> [175.092223] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [175.092306] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1
<7> [175.092403] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [175.092484] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59
<7> [175.092565] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [175.092643] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [175.092719] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [175.092792] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [175.092899] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 594000 num active planes 1
<7> [175.093010] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [175.093114] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [175.093216] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [175.093332] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz
<7> [175.093449] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated TC PLL 2
<7> [175.093550] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving TC PLL 2
<7> [175.093653] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]
<7> [175.093763] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB
<7> [175.093881] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0
<7> [175.093985] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [175.094090] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [175.094192] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [175.094294] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [175.094394] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64
<7> [175.094493] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [175.094592] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled
<7> [175.094690] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [175.094788] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [175.094905] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0
<7> [175.095009] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0
<7> [175.095111] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00
<7> [175.095212] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11
<7> [175.095312] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00
<7> [175.095411] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [175.095509] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [175.095608] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36
<7> [175.095707] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125
<7> [175.095808] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [175.095928] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [175.096035] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [175.096138] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [175.096247] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [175.096355] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [175.096463] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pixel rate 148500, min cdclk 192000, min voltage level 0
<7> [175.096569] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0
<7> [175.096673] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0
<7> [175.096775] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0
<7> [175.096883] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [175.096981] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [175.097080] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [175.097181] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [175.097283] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:
<7> [175.097382] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000
<7> [175.097481] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [175.097578] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c
<7> [175.097674] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110
<7> [175.097770] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c
<7> [175.097880] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1
<7> [175.097978] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a
<7> [175.098082] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81
<7> [175.098185] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000
<7> [175.098285] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001
<7> [175.098385] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000
<7> [175.098483] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000
<7> [175.098587] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000
<7> [175.098692] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00
<7> [175.098798] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [175.098910] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [175.099011] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [175.099109] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [175.099211] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [175.099313] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [175.099412] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [175.099510] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [175.099612] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [175.099710] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [175.099807] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [175.099915] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [175.100013] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [175.100113] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [175.100210] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0
<7> [175.100311] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [175.100417] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [175.100521] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [175.100627] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [175.100727] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [175.101309] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [175.101437] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000)
<7> [175.101544] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [175.101877] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F]
<7> [175.101972] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A]
<7> [175.102064] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B]
<7> [175.102155] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C]
<7> [175.102243] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D]
<7> [175.102329] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G]
<7> [175.102414] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A]
<7> [175.102499] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B]
<7> [175.102590] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C]
<7> [175.102676] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D]
<7> [175.102761] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H]
<7> [175.102853] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I]
<7> [175.102938] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A]
<7> [175.103023] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B]
<7> [175.103108] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C]
<7> [175.103193] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D]
<7> [175.103492] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [175.103661] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)
<7> [175.103959] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)
<7> [175.104063] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:151:pipe A]
<7> [175.104165] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2
<7> [175.109129] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [175.113871] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [175.114881] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [175.115322] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a
<7> [175.116829] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [175.117386] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1
<7> [175.123726] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Clock recovery OK
<7> [175.123858] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3
<7> [175.129724] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful
<7> [175.129966] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4
<7> [175.131285] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [175.149129] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G] Enable audio codec on [CRTC:151:pipe A], 40 bytes ELD
<7> [175.165786] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:527:DP-2]
<7> [175.166737] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<7> [175.172155] xe 0000:03:00.0: [drm:intel_hdmi_compute_output_format [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)
<7> [175.172557] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] hw max bpp: 36, pipe bpp: 36, dithering: 0
<7> [175.172991] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe C]
<7> [175.173388] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe C] fastset requirement not met in hw.active (expected no, found yes)
<7> [175.173778] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] fastset requirement not met, forcing full modeset
<7> [175.174165] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe C] releasing TC PLL 3
<7> [175.174603] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no
<7> [175.174908] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x5
<7> [175.175167] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe C] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x5
<7> [175.175570] xe 0000:03:00.0: [drm:intel_hdmi_compute_output_format [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)
<7> [175.175873] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] hw max bpp: 36, pipe bpp: 36, dithering: 0
<7> [175.176173] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe C]
<7> [175.176466] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe C] fastset requirement not met in hw.active (expected no, found yes)
<7> [175.176750] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] fastset requirement not met, forcing full modeset
<7> [175.177041] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe C] releasing TC PLL 3
<7> [175.177407] xe 0000:03:00.0: [drm:intel_hdmi_compute_output_format [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)
<7> [175.177640] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] hw max bpp: 36, pipe bpp: 36, dithering: 0
<7> [175.177886] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe C]
<7> [175.178123] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe C] fastset requirement not met in hw.active (expected no, found yes)
<7> [175.178359] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] fastset requirement not met, forcing full modeset
<7> [175.178580] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe C] releasing TC PLL 3
<7> [175.178820] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no
<7> [175.179001] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x5
<7> [175.179163] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe C] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x5
<7> [175.179444] xe 0000:03:00.0: [drm:intel_hdmi_compute_output_format [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)
<7> [175.179613] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] hw max bpp: 36, pipe bpp: 36, dithering: 0
<7> [175.179804] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe C]
<7> [175.180036] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe C] fastset requirement not met in hw.active (expected no, found yes)
<7> [175.180223] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] fastset requirement not met, forcing full modeset
<7> [175.180397] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe C] releasing TC PLL 3
<7> [175.180584] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no
<7> [175.180720] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x5
<7> [175.180855] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe C] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x5
<7> [175.181023] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989
<7> [175.181140] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59
<7> [175.181255] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:153:plane 1C] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [175.181366] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:263:cursor C] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59
<7> [175.181476] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [175.181578] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [175.181682] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [175.181783] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [175.181912] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe C] data rate 594000 num active planes 1
<7> [175.182062] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [175.182202] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [175.182344] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [175.182494] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz
<7> [175.182634] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:269:pipe C] allocated TC PLL 3
<7> [175.182759] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:269:pipe C] reserving TC PLL 3
<7> [175.182888] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe C] enable: yes [modeset]
<7> [175.183017] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB
<7> [175.183138] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: C, pipe bpp: 36, dithering: 0
<7> [175.183260] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [175.183379] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [175.183494] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [175.183599] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [175.183706] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71
<7> [175.183810] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6
<7> [175.183927] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13
<7> [175.183929] xe 0000:03:00.0: colorspace: RGB
<7> [175.183931] xe 0000:03:00.0: scan mode: Underscan
<7> [175.183932] xe 0000:03:00.0: colorimetry: No Data
<7> [175.183934] xe 0000:03:00.0: picture aspect: 16:9
<7> [175.183935] xe 0000:03:00.0: active aspect: Same as Picture
<7> [175.183936] xe 0000:03:00.0: itc: No Data
<7> [175.183937] xe 0000:03:00.0: extended colorimetry: xvYCC 601
<7> [175.183939] xe 0000:03:00.0: quantization range: Default
<7> [175.183940] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling
<7> [175.183941] xe 0000:03:00.0: video code: 16
<7> [175.183943] xe 0000:03:00.0: ycc quantization range: Full
<7> [175.183944] xe 0000:03:00.0: hdmi content type: Graphics
<7> [175.183946] xe 0000:03:00.0: pixel repeat: 0
<7> [175.183947] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0
<7> [175.183948] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25
<7> [175.183950] xe 0000:03:00.0: vendor: Intel
<7> [175.183951] xe 0000:03:00.0: product: Discrete gfx
<7> [175.183952] xe 0000:03:00.0: source device information: PC General (0x9)
<7> [175.183954] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4
<7> [175.183955] xe 0000:03:00.0: empty frame
<7> [175.183957] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00
<7> [175.184063] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51
<7> [175.184166] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00
<7> [175.184274] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [175.184383] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [175.184492] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36
<7> [175.184599] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125
<7> [175.184704] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [175.184812] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [175.184935] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [175.185046] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [175.185154] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [175.185262] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [175.185368] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pixel rate 148500, min cdclk 192000, min voltage level 0
<7> [175.185479] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0
<7> [175.185588] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0
<7> [175.185698] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0
<7> [175.185805] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [175.185922] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [175.186032] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [175.186144] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [175.186253] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:
<7> [175.186360] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000
<7> [175.186470] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [175.186581] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8
<7> [175.186690] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20
<7> [175.186800] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06
<7> [175.186918] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c
<7> [175.187025] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000
<7> [175.187134] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000
<7> [175.187248] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200
<7> [175.187359] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff
<7> [175.187468] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400
<7> [175.187577] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000
<7> [175.187685] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001
<7> [175.187793] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00
<7> [175.187921] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [175.188029] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [175.188134] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [175.188240] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [175.188344] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [175.188449] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [175.188554] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [175.188658] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [175.188767] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [175.188885] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [175.188993] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [175.189100] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [175.189206] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:153:plane 1C] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [175.189316] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [175.189428] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0
<7> [175.189538] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:183:plane 2C] fb: [NOFB], visible: no
<7> [175.189645] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:213:plane 3C] fb: [NOFB], visible: no
<7> [175.189752] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:243:plane 4C] fb: [NOFB], visible: no
<7> [175.189865] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:253:plane 5C] fb: [NOFB], visible: no
<7> [175.189973] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:263:cursor C] fb: [NOFB], visible: no
<7> [175.190805] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [175.190954] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x88000000)
<7> [175.191286] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F]
<7> [175.191388] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A]
<7> [175.191485] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B]
<7> [175.191580] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C]
<7> [175.191678] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D]
<7> [175.191772] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G]
<7> [175.191874] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A]
<7> [175.191966] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B]
<7> [175.192059] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C]
<7> [175.192155] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D]
<7> [175.192248] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H]
<7> [175.192341] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I]
<7> [175.192434] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A]
<7> [175.192526] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B]
<7> [175.192618] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C]
<7> [175.192714] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D]
<7> [175.198680] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)
<7> [175.199026] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A)
<7> [175.215354] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x4, on? 0) for [CRTC:269:pipe C]
<7> [175.215587] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3
<7> [175.218084] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe C
<7> [175.233939] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [175.237183] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:539:HDMI-A-3][ENCODER:538:DDI TC3/PHY H] Enable audio codec on [CRTC:269:pipe C], 36 bytes ELD
<7> [175.253748] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000)
<7> [175.254501] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N
<7> [175.255555] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:539:HDMI-A-3]
<7> [175.256389] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe C]
<6> [175.263541] [IGT] xe_pm: finished subtest d3hot-mmap-vram, SUCCESS
<7> [175.282614] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [175.284563] [IGT] xe_pm: exiting, ret=0
<6> [175.304302] Console: switching to colour frame buffer device 240x67
Created at 2026-05-01 05:31:01