Result:
i915_display_info14 igt_runner14 results14.json results14-xe-load.json guc_logs14.tar i915_display_info_post_exec14 serial_data14 boot14 dmesg14
| Detail | Value |
|---|---|
| Duration | 1.72 seconds |
| Hostname |
shard-lnl-8 |
| Igt-Version |
IGT-Version: 2.4-g02b0e01dd (x86_64) (Linux: 7.1.0-rc1-lgci-xe-xe-4958-24d77c4ca7f78614b-debug+ x86_64) |
| Out |
Starting dynamic subtest: pipe-C Trying on eDP-1 Dynamic subtest pipe-C: SUCCESS (1.719s) Subtest plane-upscale-20x20-with-modifiers: SUCCESS (3.809s) |
| Err |
Starting dynamic subtest: pipe-C Dynamic subtest pipe-C: SUCCESS (1.719s) Subtest plane-upscale-20x20-with-modifiers: SUCCESS (3.809s) |
| Dmesg |
<6> [115.898997] [IGT] kms_plane_scaling: starting dynamic subtest pipe-C
<7> [115.903094] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [115.905273] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [115.905838] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:389:pipe C] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [115.906330] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000
<7> [115.906725] xe 0000:00:02.0: [drm:intel_psr_compute_config [xe]] PSR2 not supported in transcoder C
<7> [115.907090] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:389:pipe C] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [115.907473] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:389:pipe C]
<7> [115.907912] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.enable (expected yes, found no)
<7> [115.908268] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.active (expected yes, found no)
<7> [115.908594] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in cpu_transcoder (expected 1, found -1)
<7> [115.909041] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in lane_count (expected 4, found 0)
<7> [115.909333] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)
<7> [115.909615] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [115.909941] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [115.910204] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [115.910453] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [115.910689] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [115.910920] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [115.911139] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [115.911356] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [115.911560] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [115.911756] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)
<7> [115.911999] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [115.912193] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [115.912370] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)
<7> [115.912568] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)
<7> [115.912758] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [115.912935] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [115.913096] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [115.913254] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [115.913413] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [115.913562] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [115.913706] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [115.913848] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)
<7> [115.914004] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [115.914145] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [115.914286] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)
<7> [115.914429] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)
<7> [115.914566] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [115.914694] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [115.914819] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [115.914973] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [115.915042] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [115.915117] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)
<7> [115.915240] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)
<7> [115.915240] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [115.915378] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in port_clock (expected 432000, found 0)
<7> [115.915391] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [115.915517] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] fastset requirement not met, forcing full modeset
<7> [115.915641] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.enable (expected no, found yes)
<7> [115.915755] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.active (expected no, found yes)
<7> [115.915866] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in cpu_transcoder (expected -1, found 2)
<7> [115.915993] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in lane_count (expected 0, found 4)
<7> [115.916100] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)
<7> [115.916205] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [115.916319] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [115.916427] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [115.916526] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [115.916620] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [115.916713] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [115.916804] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [115.916901] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [115.916998] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [115.917092] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)
<7> [115.917185] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [115.917270] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [115.917354] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)
<7> [115.917438] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)
<7> [115.917522] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [115.917606] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [115.917696] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [115.917789] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [115.917871] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [115.918003] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [115.918103] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [115.918200] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)
<7> [115.918275] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [115.918350] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [115.918423] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)
<7> [115.918496] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)
<7> [115.918570] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [115.918646] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [115.918721] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [115.918794] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [115.918870] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)
<7> [115.918970] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)
<7> [115.919064] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in port_clock (expected 0, found 432000)
<7> [115.919158] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:389:pipe C] fastset requirement not met, forcing full modeset
<7> [115.919239] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:270:pipe B] releasing DPLL 0
<7> [115.919335] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.12: staged scaling request for 20x20->2880x1800 scaler_users = 0x1000
<7> [115.919436] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xd (total dbuf slices 0xf), mbus joined? yes->no
<7> [115.919505] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:270:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x4
<7> [115.919564] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:389:pipe C] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x2 -> 0x4
<7> [115.919623] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:264:cursor B] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0
<7> [115.919681] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:273:plane 1C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [115.919736] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:383:cursor C] ddb ( 0 - 0) -> (2003 - 2048), size 0 -> 45
<7> [115.919790] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [115.919844] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [115.919904] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [115.919974] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [115.920064] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [115.920189] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [115.920279] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [115.920363] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [115.920451] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [115.920542] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [115.920632] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:270:pipe B] min cdclk: 173855 kHz -> 0 kHz
<7> [115.920721] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:389:pipe C] min cdclk: 0 kHz -> 173855 kHz
<7> [115.920842] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:389:pipe C] allocated DPLL 0
<7> [115.920943] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:389:pipe C] reserving DPLL 0
<7> [115.921061] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:273
<7> [115.921152] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: no [modeset]
<7> [115.921248] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:154:plane 1B] fb: [NOFB], visible: no
<7> [115.921328] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:184:plane 2B] fb: [NOFB], visible: no
<7> [115.921410] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:214:plane 3B] fb: [NOFB], visible: no
<7> [115.921491] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:244:plane 4B] fb: [NOFB], visible: no
<7> [115.921572] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:254:plane 5B] fb: [NOFB], visible: no
<7> [115.921652] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:264:cursor B] fb: [NOFB], visible: no
<7> [115.921732] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:389:pipe C] enable: yes [modeset]
<7> [115.921811] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [115.921897] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: C, pipe bpp: 30, dithering: 0
<7> [115.921999] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [115.922104] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [115.922205] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [115.922291] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [115.922377] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [115.922454] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [115.922532] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [115.922609] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [115.922686] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [115.922766] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0
<7> [115.922845] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [115.922941] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 2, length 8
<7> [115.923054] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [115.923169] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [115.923258] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [115.923333] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [115.923406] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [115.923480] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [115.923553] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [115.923626] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [115.923700] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [115.923774] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [115.923846] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [115.923935] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [115.924031] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [115.924126] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [115.924215] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [115.924288] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 173855, min voltage level 0
<7> [115.924360] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [115.924436] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x1000, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0
<7> [115.924516] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0
<7> [115.924593] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [115.924671] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [115.924746] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [115.924817] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [115.924893] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no,
<7> [115.924981] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [115.925077] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [115.925171] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [115.925248] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [115.925319] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [115.925390] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [115.925460] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [115.925531] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [115.925604] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [115.925678] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [115.925751] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [115.925824] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [115.925903] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [115.926000] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [115.926096] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [115.926191] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [115.926272] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [115.926350] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [115.926426] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [115.926497] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [115.926568] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:273:plane 1C] fb: [FB:433] 20x20 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [115.926641] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0
<7> [115.926712] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 20.000000x20.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [115.926784] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:303:plane 2C] fb: [NOFB], visible: no
<7> [115.926857] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:333:plane 3C] fb: [NOFB], visible: no
<7> [115.926967] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:363:plane 4C] fb: [NOFB], visible: no
<7> [115.927060] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:373:plane 5C] fb: [NOFB], visible: no
<7> [115.927152] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:383:cursor C] fb: [NOFB], visible: no
<7> [115.927334] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [115.927432] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [115.927557] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [115.927708] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x82000000)
<7> [115.927901] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [115.928021] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [116.135091] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0
<7> [116.135653] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe B
<7> [116.149261] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off
<7> [116.149597] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [116.149979] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [116.150307] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short
<7> [116.150687] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [116.201275] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [116.201619] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x2, on? 1) for [CRTC:270:pipe B]
<7> [116.201716] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [116.202286] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [116.202524] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short
<7> [116.202924] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [116.203523] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [116.203912] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [116.204264] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A]
<7> [116.204549] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1]
<7> [116.204780] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A]
<7> [116.205035] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B]
<7> [116.205262] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C]
<7> [116.205493] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2]
<7> [116.205769] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A]
<7> [116.206032] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B]
<7> [116.206266] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C]
<7> [116.206510] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3]
<7> [116.206771] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A]
<7> [116.207043] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B]
<7> [116.207285] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C]
<7> [116.207530] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:402:DP-1]
<7> [116.207838] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:414:DP-2]
<7> [116.208136] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:422:DP-3]
<7> [116.208450] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [116.208680] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)
<7> [116.208957] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [116.210529] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x4, on? 0) for [CRTC:389:pipe C]
<7> [116.210837] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [116.213206] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on
<7> [116.213434] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (489 ms remaining)
<7> [116.237410] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [116.237701] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long
<7> [116.237980] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [116.238365] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [116.711074] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [116.749382] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [116.749708] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on
<7> [116.750032] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [116.786747] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [116.787062] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long
<7> [116.787332] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [116.787731] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [116.955933] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [116.956284] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on
<7> [116.956546] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [116.958536] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [116.960041] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [116.960809] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7> [116.962529] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [116.963872] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [116.964994] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK
<7> [116.965336] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [116.966721] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [116.967053] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7> [116.967811] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe C
<7> [116.968328] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [116.968670] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe C
<7> [116.969086] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 13892
<7> [116.970711] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 20480 bytes of contiguous stolen space for FBC, limit: 1
<7> [116.971081] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:273:plane 1C]
<7> [116.985033] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xd
<7> [116.985510] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [116.985870] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x8a000000)
<7> [116.986375] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:270:pipe B]
<7> [116.986755] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [116.988140] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]
<7> [116.988460] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:389:pipe C]
<7> [116.992078] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe C
<7> [116.992396] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [116.992482] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:273:plane 1C] because [FB:433] is removed
<7> [116.992540] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.12: Staged freeing scaler id 0 scaler_users = 0x0
<7> [116.992826] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:273:plane 1C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [116.993155] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [116.993387] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [116.993626] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [116.993841] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [116.994146] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [116.994505] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [116.994793] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [116.995104] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [116.995362] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [116.995665] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [116.996351] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.001708] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:273:plane 1C]
<7> [117.019355] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [117.019642] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.12: staged scaling request for 20x20->2880x1800 scaler_users = 0x1000
<7> [117.020029] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:273:plane 1C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.020334] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.020625] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [117.020932] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [117.021211] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [117.021558] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [117.021972] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.022356] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.022733] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.023150] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.023581] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.024069] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:273
<7> [117.025738] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 163840 bytes of contiguous stolen space for FBC, limit: 1
<7> [117.026113] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:273:plane 1C]
<7> [117.035067] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.036457] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [117.036541] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:273:plane 1C] because [FB:433] is removed
<7> [117.036593] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.12: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.036927] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:273:plane 1C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.037181] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.037418] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.037620] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.037844] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.038120] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [117.038397] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.038649] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.038901] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.039156] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.039385] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.039915] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.051680] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:273:plane 1C]
<7> [117.069274] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [117.069495] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.12: staged scaling request for 20x20->2880x1800 scaler_users = 0x1000
<7> [117.069869] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:273:plane 1C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.070292] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.070570] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [117.070841] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [117.071192] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [117.071483] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [117.071873] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.072307] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.072728] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.073176] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.073565] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.073988] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:273
<7> [117.075445] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 40960 bytes of contiguous stolen space for FBC, limit: 1
<7> [117.075781] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:273:plane 1C]
<7> [117.085039] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.086353] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [117.086431] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:273:plane 1C] because [FB:433] is removed
<7> [117.086478] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.12: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.086793] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:273:plane 1C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.087148] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.087392] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.087605] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.087823] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:273:plane 1C] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.088091] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [117.088356] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.088598] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.088834] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.089130] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.089347] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.089849] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.101686] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:273:plane 1C]
<7> [117.119256] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [117.119565] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.13: staged scaling request for 20x20->2880x1800 scaler_users = 0x2000
<7> [117.119964] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:303:plane 2C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.120304] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.120569] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [117.120898] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [117.121158] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [117.121437] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [117.121811] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.122275] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.122636] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.123081] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.123437] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.123909] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:303
<7> [117.125069] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 20480 bytes of contiguous stolen space for FBC, limit: 1
<7> [117.125361] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:303:plane 2C]
<7> [117.135054] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.136436] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [117.136535] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:303:plane 2C] because [FB:433] is removed
<7> [117.136596] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.13: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.136965] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:303:plane 2C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.137221] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.137441] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.137640] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.137847] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.138102] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [117.138383] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.138644] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.138895] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.139158] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.139392] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.139936] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.151657] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:303:plane 2C]
<7> [117.169179] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [117.169432] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.13: staged scaling request for 20x20->2880x1800 scaler_users = 0x2000
<7> [117.169805] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:303:plane 2C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.170163] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.170408] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [117.170645] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [117.170898] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [117.171157] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [117.171509] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.171854] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.172298] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.172633] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.173034] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.173439] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:303
<7> [117.174800] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 163840 bytes of contiguous stolen space for FBC, limit: 1
<7> [117.175121] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:303:plane 2C]
<7> [117.185029] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.186286] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [117.186353] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:303:plane 2C] because [FB:433] is removed
<7> [117.186391] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.13: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.186662] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:303:plane 2C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.186947] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.187157] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.187390] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.187573] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.187766] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [117.188060] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.188319] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.188562] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.188794] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.189039] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.189535] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.201675] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:303:plane 2C]
<7> [117.219241] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [117.219441] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.13: staged scaling request for 20x20->2880x1800 scaler_users = 0x2000
<7> [117.219867] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:303:plane 2C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.220271] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.220521] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [117.220787] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [117.221097] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [117.221369] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [117.221817] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.13: staged scaling request for 20x20->2880x1800 scaler_users = 0x2000
<7> [117.222175] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:303:plane 2C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.222475] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.222728] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [117.223011] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [117.223232] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [117.223458] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [117.223798] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.224249] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.224667] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.225039] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.225352] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.225724] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:303
<7> [117.227159] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 40960 bytes of contiguous stolen space for FBC, limit: 1
<7> [117.227443] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:303:plane 2C]
<7> [117.235000] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.236040] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [117.236078] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:303:plane 2C] because [FB:433] is removed
<7> [117.236104] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.13: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.236233] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:303:plane 2C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.236336] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.236432] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.236648] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.236871] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:303:plane 2C] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.237188] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [117.237407] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.237540] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.237665] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.237785] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.237916] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.238196] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.251644] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:303:plane 2C]
<7> [117.269214] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [117.269462] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.14: staged scaling request for 20x20->2880x1800 scaler_users = 0x4000
<7> [117.269806] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:333:plane 3C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.270143] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.270390] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [117.270626] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [117.270896] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [117.271152] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [117.271493] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.271827] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.272240] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.272613] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.272955] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.273406] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:333
<7> [117.274549] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 20480 bytes of contiguous stolen space for FBC, limit: 1
<7> [117.274849] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:333:plane 3C]
<7> [117.285012] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.286337] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [117.286404] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:333:plane 3C] because [FB:433] is removed
<7> [117.286457] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.14: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.286796] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:333:plane 3C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.287192] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.287436] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.287623] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.287846] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.288127] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [117.288393] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.288643] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.288944] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.289175] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.289388] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.289891] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.301661] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:333:plane 3C]
<7> [117.318926] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [117.319082] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.14: staged scaling request for 20x20->2880x1800 scaler_users = 0x4000
<7> [117.319366] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:333:plane 3C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.319602] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.319791] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [117.320013] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [117.320212] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [117.320448] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [117.320712] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.320988] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.321238] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.321494] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.321754] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.322139] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:333
<7> [117.323194] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 163840 bytes of contiguous stolen space for FBC, limit: 1
<7> [117.323433] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:333:plane 3C]
<7> [117.334995] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.336198] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [117.336257] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:333:plane 3C] because [FB:433] is removed
<7> [117.336294] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.14: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.336513] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:333:plane 3C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.336698] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.336872] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.337101] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.337288] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.337495] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [117.337790] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.338096] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.338361] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.338670] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.338975] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.339529] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.351636] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:333:plane 3C]
<7> [117.369057] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [117.369233] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.14: staged scaling request for 20x20->2880x1800 scaler_users = 0x4000
<7> [117.369515] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:333:plane 3C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.369727] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.369962] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [117.370156] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [117.370365] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [117.370562] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [117.370824] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.371108] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.371377] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.371640] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.371954] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.372269] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:333
<7> [117.373411] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 40960 bytes of contiguous stolen space for FBC, limit: 1
<7> [117.373652] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:333:plane 3C]
<7> [117.385001] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.386292] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [117.386365] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:333:plane 3C] because [FB:433] is removed
<7> [117.386408] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.14: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.386674] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:333:plane 3C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.386924] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.387132] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.387340] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.387528] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:333:plane 3C] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.387732] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [117.388039] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.388319] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.388644] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.388903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.389144] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.389711] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.401643] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:333:plane 3C]
<7> [117.418842] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [117.419073] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.15: staged scaling request for 20x20->2880x1800 scaler_users = 0x8000
<7> [117.419350] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:363:plane 4C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.419550] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.419720] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [117.419902] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [117.420070] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [117.420279] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [117.420553] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.420820] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.421155] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.421401] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.421644] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.421951] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:363
<7> [117.435023] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.436222] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [117.436284] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:363:plane 4C] because [FB:433] is removed
<7> [117.436320] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.15: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.436530] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:363:plane 4C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.436703] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.436873] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.437097] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.437292] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.437514] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [117.437806] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.438129] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.438488] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.438837] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.439161] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.439739] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.452344] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [117.452540] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.15: staged scaling request for 20x20->2880x1800 scaler_users = 0x8000
<7> [117.452872] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:363:plane 4C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.453283] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.453534] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [117.453802] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [117.454089] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [117.454377] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [117.454722] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.455077] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.455398] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.455687] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.456059] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.456387] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:363
<7> [117.468334] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.469620] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [117.469687] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:363:plane 4C] because [FB:433] is removed
<7> [117.469726] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.15: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.470016] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:363:plane 4C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.470230] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.470440] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.470644] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.470909] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.471150] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [117.471446] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.471719] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.472016] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.472289] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.472538] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.473103] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.485489] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [117.485653] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.15: staged scaling request for 20x20->2880x1800 scaler_users = 0x8000
<7> [117.486027] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:363:plane 4C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.486306] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.486503] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [117.486690] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [117.486931] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [117.487153] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [117.487440] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.487718] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.488015] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.488280] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.488533] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.488844] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:363
<7> [117.501633] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.502905] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [117.502969] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:363:plane 4C] because [FB:433] is removed
<7> [117.503014] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.15: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.503246] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:363:plane 4C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.503450] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.503649] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.503844] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.504148] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:363:plane 4C] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.504386] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [117.504700] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.505054] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.505369] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.505716] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.506061] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.506695] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.518936] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [117.519174] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.16: staged scaling request for 20x20->2880x1800 scaler_users = 0x10000
<7> [117.519431] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:373:plane 5C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.519646] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.519852] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [117.520124] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [117.520318] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [117.520557] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [117.520955] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.16: staged scaling request for 20x20->2880x1800 scaler_users = 0x10000
<7> [117.521165] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:373:plane 5C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.521348] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.521526] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [117.521697] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [117.521874] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [117.522148] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [117.522424] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.522674] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.522927] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.523158] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.523433] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.523703] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:373
<7> [117.534996] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.536292] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [117.536342] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:373:plane 5C] because [FB:433] is removed
<7> [117.536373] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.16: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.536686] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:373:plane 5C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.537009] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.537270] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.537481] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.537631] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.537784] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [117.537989] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.538160] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.538330] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.538494] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.538652] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.539361] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.552160] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [117.552311] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.16: staged scaling request for 20x20->2880x1800 scaler_users = 0x10000
<7> [117.552643] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:373:plane 5C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.552898] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.553086] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [117.553260] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [117.553456] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [117.553645] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [117.553960] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.16: staged scaling request for 20x20->2880x1800 scaler_users = 0x10000
<7> [117.554139] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:373:plane 5C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.554292] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.554434] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [117.554572] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [117.554725] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [117.554873] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [117.555118] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.555324] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.555519] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.555705] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.555904] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.556122] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:373
<7> [117.568295] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.569379] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [117.569454] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:373:plane 5C] because [FB:433] is removed
<7> [117.569496] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.16: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.569797] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:373:plane 5C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.570121] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.570354] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.570493] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.570645] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.570812] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [117.571032] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.571216] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.571396] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.571576] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.571769] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.572164] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.585444] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [117.585596] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.16: staged scaling request for 20x20->2880x1800 scaler_users = 0x10000
<7> [117.585837] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:373:plane 5C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.586096] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.586283] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [117.586461] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [117.586650] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [117.586846] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 1390840 num active planes 1
<7> [117.587136] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.587378] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.587603] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.587818] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.588057] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.588312] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:389:pipe C] attached scaler id 2.0 to PLANE:373
<7> [117.601634] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.602834] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [117.602907] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:373:plane 5C] because [FB:433] is removed
<7> [117.602944] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:389:pipe C] scaler_user index 2.16: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.603167] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:373:plane 5C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.603347] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.603517] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.603682] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.603845] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:373:plane 5C] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.604066] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:389:pipe C] data rate 0 num active planes 0
<7> [117.604363] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.604597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.604823] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.605063] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.605273] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.605739] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<6> [117.618922] [IGT] kms_plane_scaling: finished subtest pipe-C, SUCCESS
<6> [117.619780] [IGT] kms_plane_scaling: finished subtest plane-upscale-20x20-with-modifiers, SUCCESS
<7> [117.622328] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]
<7> [117.623823] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [117.624281] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [117.624611] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000
<7> [117.624996] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [117.625362] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A]
<7> [117.625703] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [117.626062] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [117.626447] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [117.626762] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [117.627100] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)
<7> [117.627400] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [117.627692] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [117.628000] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [117.628317] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [117.628604] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [117.628863] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [117.629170] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [117.629482] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [117.629732] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [117.629980] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)
<7> [117.630203] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [117.630425] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [117.630674] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)
<7> [117.630900] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)
<7> [117.631101] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [117.631296] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [117.631516] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [117.631703] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [117.631896] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [117.632076] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [117.632251] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [117.632420] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)
<7> [117.632585] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [117.632753] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [117.632918] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)
<7> [117.633077] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)
<7> [117.633229] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [117.633389] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [117.633550] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [117.633706] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [117.633855] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)
<7> [117.634022] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)
<7> [117.634166] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 432000)
<7> [117.634303] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [117.634440] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.enable (expected yes, found no)
<7> [117.634574] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.active (expected yes, found no)
<7> [117.634703] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in cpu_transcoder (expected 2, found -1)
<7> [117.634828] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in lane_count (expected 4, found 0)
<7> [117.635112] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)
<7> [117.635257] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [117.635397] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [117.635512] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [117.635624] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [117.635736] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [117.635844] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [117.635968] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [117.636075] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [117.636177] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [117.636277] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)
<7> [117.636377] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [117.636477] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [117.636575] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)
<7> [117.636669] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)
<7> [117.636764] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [117.636856] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [117.636969] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [117.637069] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [117.637166] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [117.637258] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [117.637351] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [117.637440] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)
<7> [117.637526] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [117.637618] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [117.637710] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)
<7> [117.637801] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)
<7> [117.637891] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [117.637986] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [117.638081] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [117.638176] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [117.638254] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)
<7> [117.638331] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)
<7> [117.638406] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:389:pipe C] fastset requirement not met in port_clock (expected 432000, found 0)
<7> [117.638478] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:389:pipe C] fastset requirement not met, forcing full modeset
<7> [117.638552] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:389:pipe C] releasing DPLL 0
<7> [117.638674] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xd -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [117.638743] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x4 -> 0x1
<7> [117.638810] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:389:pipe C] dbuf slices 0xc -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x4 -> 0x1
<7> [117.638883] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051
<7> [117.638961] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45
<7> [117.639037] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.639108] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [117.639179] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [117.639235] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [117.639290] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:383:cursor C] ddb (2003 - 2048) -> ( 0 - 0), size 45 -> 0
<7> [117.639366] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 1390840 num active planes 1
<7> [117.639468] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.639564] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.639650] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.639732] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.639813] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.639907] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 173855 kHz
<7> [117.639997] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:389:pipe C] min cdclk: 173855 kHz -> 0 kHz
<7> [117.640118] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated DPLL 0
<7> [117.640205] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0
<7> [117.640286] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]
<7> [117.640372] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [117.640456] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [117.640538] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [117.640618] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [117.640698] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [117.640778] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [117.640857] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [117.640953] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [117.641042] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [117.641127] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [117.641211] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [117.641295] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0
<7> [117.641371] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [117.641447] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [117.641523] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [117.641599] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [117.641675] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [117.641751] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [117.641825] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [117.641908] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [117.641991] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [117.642072] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [117.642154] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [117.642230] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [117.642304] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [117.642379] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [117.642454] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [117.642529] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [117.642602] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [117.642676] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 173855, min voltage level 0
<7> [117.642750] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [117.642823] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0
<7> [117.642903] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0
<7> [117.642987] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [117.643071] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [117.643155] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [117.643233] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [117.643312] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no,
<7> [117.643394] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [117.643475] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [117.643556] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [117.643633] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [117.643708] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [117.643782] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [117.643857] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [117.643954] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [117.644037] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [117.644118] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [117.644198] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [117.644271] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [117.644344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [117.644418] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [117.644496] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [117.644580] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [117.644663] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [117.644741] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [117.644815] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [117.644893] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [117.644973] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:394] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [117.645057] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [117.645140] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [117.645221] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [117.645301] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [117.645388] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [117.645469] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [117.645541] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [117.645612] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:389:pipe C] enable: no [modeset]
<7> [117.645685] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:273:plane 1C] fb: [NOFB], visible: no
<7> [117.645757] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:303:plane 2C] fb: [NOFB], visible: no
<7> [117.645832] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:333:plane 3C] fb: [NOFB], visible: no
<7> [117.645918] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:363:plane 4C] fb: [NOFB], visible: no
<7> [117.645998] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:373:plane 5C] fb: [NOFB], visible: no
<7> [117.646077] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:383:cursor C] fb: [NOFB], visible: no
<7> [117.646217] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [117.646383] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x88000000)
<7> [117.646650] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [117.646743] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [117.855092] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0
<7> [117.855651] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe C
<7> [117.869260] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off
<7> [117.869567] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [117.869712] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [117.869831] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [117.869981] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short
<7> [117.922309] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [117.922639] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short
<7> [117.929193] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [117.929509] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x4, on? 1) for [CRTC:389:pipe C]
<7> [117.929633] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [117.930044] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [117.930930] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [117.931405] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [117.931835] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A]
<7> [117.932220] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1]
<7> [117.932526] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A]
<7> [117.932792] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B]
<7> [117.933097] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C]
<7> [117.933357] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2]
<7> [117.933626] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A]
<7> [117.933894] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B]
<7> [117.934203] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C]
<7> [117.934511] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3]
<7> [117.934756] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A]
<7> [117.935036] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B]
<7> [117.935281] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C]
<7> [117.935633] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [117.936063] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)
<7> [117.936301] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7> [117.936612] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [117.937929] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]
<7> [117.938326] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [117.940760] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on
<7> [117.941099] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (489 ms remaining)
<7> [117.957356] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [117.957585] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long
<7> [117.957842] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [117.958221] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [118.439109] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [118.524139] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [118.524482] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on
<7> [118.524747] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [118.561462] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [118.561778] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long
<7> [118.562044] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [118.562465] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [118.735076] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [118.735426] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on
<7> [118.735702] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [118.737684] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [118.739169] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [118.739916] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7> [118.740977] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [118.742259] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [118.743259] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK
<7> [118.743530] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [118.744867] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [118.745175] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7> [118.745808] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [118.746200] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [118.746464] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7> [118.746766] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 13892
<7> [118.763090] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [118.764839] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]
<7> [118.765344] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<7> [118.768460] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [118.768921] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xa8000000)
<7> [118.769378] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [118.769828] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:389:pipe C]
<7> [118.771943] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [118.772575] [IGT] kms_plane_scaling: exiting, ret=0
<6> [118.780220] Console: switching to colour frame buffer device 180x56
|