Results for igt@kms_force_connector_basic@force-edid

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.4-g02b0e01dd (x86_64) (Linux: 7.1.0-rc1-lgci-xe-xe-4957-98849fffd754b9c71-debug+ x86_64)
Out 
Using IGT_SRANDOM=1777533868 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.033s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.033s)
Dmesg
<6> [895.809216] Console: switching to colour dummy device 80x25
<6> [895.809408] [IGT] kms_force_connector_basic: executing
<7> [895.813443] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:517:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [895.813450] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [895.813455] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [895.817643] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [895.817699] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [895.817705] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [895.821906] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [895.821962] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [895.821966] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [895.826302] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<6> [895.826477] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [895.826749] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:517:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [895.826755] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [895.826760] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [895.827197] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [895.827297] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [895.827674] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [895.827767] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [895.827775] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [895.827885] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [895.834181] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [895.834193] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [895.834306] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] status updated from disconnected to connected
<7> [895.834349] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] probed modes:
<7> [895.834352] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [895.834356] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [895.834359] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [895.834362] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [895.834364] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [895.834403] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [895.834407] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [895.834802] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [895.834899] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [895.835290] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [895.835386] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [895.835393] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [895.835487] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [895.836174] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [895.836287] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [895.841863] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [895.841872] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [895.842012] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] probed modes:
<7> [895.842016] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [895.842019] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [895.842022] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [895.842024] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [895.842027] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [895.842229] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:517:HDMI-A-1] EDID override set
<7> [895.842247] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [895.842250] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [895.842519] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:517:HDMI-A-1] ELD monitor IGT
<7> [895.842524] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:517:HDMI-A-1] ELD size 24, SAD count 0
<7> [895.842814] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [895.842913] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [895.843331] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [895.843429] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [895.843513] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [895.843520] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [895.843525] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] probed modes:
<7> [895.843528] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [895.843531] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [895.843534] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [895.843537] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [895.843539] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [895.843627] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:517:HDMI-A-1] EDID override reset
<7> [895.843699] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [895.843701] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [895.844084] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [895.844186] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [895.844554] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [895.844645] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [895.844651] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [895.844740] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [895.851157] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [895.851165] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [895.851260] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:517:HDMI-A-1] EDID changed, epoch counter 2
<7> [895.851305] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [895.851311] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [895.851318] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] probed modes:
<7> [895.851321] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [895.851323] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [895.851326] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [895.851328] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [895.851331] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [895.851471] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:517:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [895.851475] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [895.851478] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [895.855653] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] status updated from connected to disconnected
<7> [895.855661] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [895.855684] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [895.855729] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [895.855755] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [895.855759] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [895.859938] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<6> [895.860175] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [895.870777] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [895.870782] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [895.870827] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [895.870831] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1]
<7> [895.871293] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [895.871675] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [895.871777] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [895.871877] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [895.871994] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [895.871999] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [895.872003] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [895.872006] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [895.872019] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [895.872118] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [895.872251] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [895.872605] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [895.872609] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [895.872612] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [895.872616] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [895.872620] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [895.876797] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [895.876803] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1]
<7> [895.876806] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-1]
<7> [895.876964] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1] disconnected
<7> [895.876968] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2]
<7> [895.876970] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:536:DP-2]
<7> [895.897988] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [895.918970] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [895.939947] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [895.960910] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [895.981872] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.002836] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.023803] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.044766] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.065733] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.086698] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.107663] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.128628] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.149588] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.170550] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.191513] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.212473] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.233438] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.254401] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.275367] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.296330] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.317292] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.338258] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.359222] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.380183] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.401143] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.422117] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.443082] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.464079] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.485070] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.506062] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.527055] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.548047] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.548193] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [896.548213] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2] disconnected
<7> [896.548393] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3]
<7> [896.548397] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:545:DP-3]
<7> [896.548560] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3] disconnected
<7> [896.548797] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4]
<7> [896.548801] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:554:DP-4]
<7> [896.548956] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4] disconnected
<7> [896.548960] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] enabled? yes
<7> [896.548964] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:517:HDMI-A-1] enabled? no
<7> [896.548966] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-1] enabled? no
<7> [896.548969] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:536:DP-2] enabled? no
<7> [896.548971] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:545:DP-3] enabled? no
<7> [896.548973] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:554:DP-4] enabled? no
<7> [896.548999] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [896.549011] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] found preferred mode: 3840x2160
<7> [896.549014] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
<7> [896.549030] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 3840x2160 set (0,0)
<7> [896.568941] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [896.569599] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:508:eDP-1] force updated from 0 to 0 or reprobing
<7> [896.569604] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [896.569608] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1]
<7> [896.570066] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [896.570401] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [896.570566] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [896.570725] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [896.570864] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [896.570869] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [896.570873] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [896.570876] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [896.570891] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [896.570991] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [896.571088] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [896.571452] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [896.571456] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [896.571459] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [896.571489] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [896.571492] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1]
<7> [896.571985] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [896.572291] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [896.572429] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [896.572551] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [896.572662] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [896.572666] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [896.572669] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [896.572672] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [896.572683] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [896.572782] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [896.572883] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [896.573224] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [896.573227] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [896.573230] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [896.573315] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:508:eDP-1] EDID override reset
<7> [896.573330] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [896.573333] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1]
<7> [896.573773] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [896.574067] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [896.574229] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [896.574350] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [896.574479] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [896.574483] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [896.574487] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [896.574490] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [896.574501] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [896.574597] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [896.574691] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [896.575028] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [896.575031] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [896.575035] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [896.575171] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:517:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [896.575175] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [896.575179] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [896.579362] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [896.579384] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [896.579388] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [896.583530] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [896.583620] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:517:HDMI-A-1] EDID override reset
<7> [896.583635] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [896.583639] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [896.587806] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [896.587901] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:526:DP-1] EDID override reset
<7> [896.587917] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1]
<7> [896.587920] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-1]
<7> [896.588097] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1] disconnected
<7> [896.588190] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:536:DP-2] EDID override reset
<7> [896.588204] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2]
<7> [896.588207] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:536:DP-2]
<7> [896.609222] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.630190] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.651156] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.672116] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.693077] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.714076] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.735072] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.756068] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.777056] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.798041] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.819023] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.839999] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.860962] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.881927] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.902894] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.923850] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.944808] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.965768] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [896.986725] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [897.007680] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [897.028635] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [897.049589] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [897.070545] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [897.091500] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [897.112461] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [897.133419] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [897.154373] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [897.175331] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [897.196290] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [897.217246] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [897.238206] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [897.259164] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [897.259273] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [897.259292] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2] disconnected
<7> [897.259401] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:545:DP-3] EDID override reset
<7> [897.259416] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3]
<7> [897.259419] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:545:DP-3]
<7> [897.259574] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3] disconnected
<7> [897.259649] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:554:DP-4] EDID override reset
<7> [897.259661] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4]
<7> [897.259664] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:554:DP-4]
<7> [897.259813] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4] disconnected
<7> [897.279998] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [897.280311] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [897.296538] Console: switching to colour frame buffer device 240x67
Created at 2026-04-30 07:40:58