igt@xe_pm@d3hot-mmap-vram on shard-bmg@xe-4954-c50aab3f28b1580a38a58ca7a3fc3ff9ceb5d5ed Test details

Detail	Value
Duration	14.39 seconds
Hostname	shard-bmg-6
Igt-Version	IGT-Version: 2.4-g02b0e01dd (x86_64) (Linux: 7.1.0-rc1-lgci-xe-xe-4954-c50aab3f28b1580a3-debug+ x86_64)
Out	Using IGT_SRANDOM=1777542401 for randomisation Opened device: /dev/dri/card0 Starting subtest: d3hot-mmap-vram Subtest d3hot-mmap-vram: SUCCESS (14.389s)
Err	Starting subtest: d3hot-mmap-vram Subtest d3hot-mmap-vram: SUCCESS (14.389s)
Dmesg	<6> [189.333598] Console: switching to colour dummy device 80x25 <6> [189.333899] [IGT] xe_pm: executing <6> [189.411150] [IGT] xe_pm: starting subtest d3hot-mmap-vram <7> [189.412781] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [189.413147] xe 0000:03:00.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [189.413446] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [189.413757] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A] <7> [189.414105] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [189.414437] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [189.414747] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2 <7> [189.415159] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xd (total dbuf slices 0xf), mbus joined? no->no <7> [189.415413] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x5 -> 0x4 <7> [189.415695] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0 <7> [189.415949] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0 <7> [189.416181] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [189.416383] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [189.416587] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [189.416780] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [189.417150] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 0 num active planes 0 <7> [189.417424] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000 <7> [189.417678] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000 <7> [189.417940] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624 <7> [189.418231] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz <7> [189.418490] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated TC PLL 2 <7> [189.418706] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving TC PLL 2 <7> [189.418941] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset] <7> [189.419179] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [189.419395] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [189.419549] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [189.419655] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [189.419763] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [189.419887] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [189.420001] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 <7> [189.420104] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [189.420205] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [189.420307] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [189.420408] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [189.420509] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7> [189.420609] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [189.420709] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00 <7> [189.420810] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11 <7> [189.420923] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00 <7> [189.421035] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [189.421140] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [189.421245] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36 <7> [189.421348] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125 <7> [189.421449] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [189.421549] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [189.421650] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [189.421752] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [189.421866] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [189.421983] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [189.422087] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pixel rate 148500, min cdclk 192000, min voltage level 0 <7> [189.422190] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [189.422292] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [189.422395] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0 <7> [189.422497] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [189.422599] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [189.422700] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [189.422802] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [189.422916] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [189.423035] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000 <7> [189.423142] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [189.423246] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c <7> [189.423349] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110 <7> [189.423451] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c <7> [189.423552] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1 <7> [189.423652] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a <7> [189.423753] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81 <7> [189.423861] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000 <7> [189.423972] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001 <7> [189.424073] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000 <7> [189.424173] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [189.424273] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000 <7> [189.424376] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00 <7> [189.424482] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [189.424587] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [189.424689] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [189.424794] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [189.424909] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [189.425021] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [189.425123] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [189.425223] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [189.425327] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [189.425434] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [189.425542] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [189.425644] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [189.425747] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [189.425856] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [189.425974] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [189.426080] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [189.426185] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [189.426288] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [189.426390] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [189.426805] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G] Disable audio codec on [CRTC:151:pipe A] <7> [189.454930] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [189.472100] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [189.475036] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:151:pipe A] <7> [189.477629] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2 <7> [189.478536] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F] <7> [189.479105] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A] <7> [189.479649] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B] <7> [189.480148] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C] <7> [189.480580] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D] <7> [189.481021] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G] <7> [189.481398] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A] <7> [189.481753] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B] <7> [189.482141] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C] <7> [189.482492] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D] <7> [189.482789] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H] <7> [189.483137] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I] <7> [189.483470] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A] <7> [189.483752] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B] <7> [189.484075] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C] <7> [189.484362] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D] <7> [189.486486] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [189.486906] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xd <7> [189.487600] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [189.487815] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x8a000000) <7> [189.488275] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:527:DP-2] <7> [189.488474] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A] <7> [189.489229] xe 0000:03:00.0: [drm:intel_hdmi_compute_output_format [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [189.489408] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [189.489576] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe C] <7> [189.489741] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe C] fastset requirement not met in hw.active (expected yes, found no) <7> [189.489924] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] fastset requirement not met, forcing full modeset <7> [189.490080] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe C] releasing TC PLL 3 <7> [189.490253] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xd -> 0x1 (total dbuf slices 0xf), mbus joined? no->no <7> [189.490377] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe C] dbuf slices 0xc -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x4 -> 0x0 <7> [189.490512] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:153:plane 1C] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0 <7> [189.490624] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:263:cursor C] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0 <7> [189.490729] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [189.490829] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [189.490948] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [189.491047] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [189.491155] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe C] data rate 0 num active planes 0 <7> [189.491292] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000 <7> [189.491424] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000 <7> [189.491543] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0 <7> [189.491690] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz <7> [189.491828] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:269:pipe C] allocated TC PLL 3 <7> [189.491960] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:269:pipe C] reserving TC PLL 3 <7> [189.492067] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe C] enable: yes [modeset] <7> [189.492186] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [189.492299] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: C, pipe bpp: 36, dithering: 0 <7> [189.492409] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [189.492518] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [189.492620] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [189.492720] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [189.492820] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [189.492942] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [189.493051] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [189.493053] xe 0000:03:00.0: colorspace: RGB <7> [189.493055] xe 0000:03:00.0: scan mode: Underscan <7> [189.493056] xe 0000:03:00.0: colorimetry: No Data <7> [189.493057] xe 0000:03:00.0: picture aspect: 16:9 <7> [189.493058] xe 0000:03:00.0: active aspect: Same as Picture <7> [189.493060] xe 0000:03:00.0: itc: No Data <7> [189.493061] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [189.493062] xe 0000:03:00.0: quantization range: Default <7> [189.493063] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [189.493065] xe 0000:03:00.0: video code: 16 <7> [189.493066] xe 0000:03:00.0: ycc quantization range: Full <7> [189.493067] xe 0000:03:00.0: hdmi content type: Graphics <7> [189.493068] xe 0000:03:00.0: pixel repeat: 0 <7> [189.493070] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [189.493071] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [189.493073] xe 0000:03:00.0: vendor: Intel <7> [189.493074] xe 0000:03:00.0: product: Discrete gfx <7> [189.493075] xe 0000:03:00.0: source device information: PC General (0x9) <7> [189.493077] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [189.493078] xe 0000:03:00.0: empty frame <7> [189.493079] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00 <7> [189.493184] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51 <7> [189.493287] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00 <7> [189.493389] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [189.493489] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [189.493589] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36 <7> [189.493689] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [189.493788] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [189.493896] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [189.494005] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [189.494112] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [189.494215] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [189.494321] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [189.494426] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pixel rate 148500, min cdclk 192000, min voltage level 0 <7> [189.494528] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [189.494630] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [189.494735] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0 <7> [189.494850] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [189.494959] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [189.495061] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [189.495163] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [189.495264] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [189.495365] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [189.495466] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [189.495567] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8 <7> [189.495667] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [189.495768] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06 <7> [189.495882] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [189.495993] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [189.496100] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [189.496207] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [189.496315] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [189.496422] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400 <7> [189.496526] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [189.496628] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [189.496729] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [189.496831] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [189.496946] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [189.497053] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [189.497160] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [189.497266] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [189.497369] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [189.497471] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [189.497572] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [189.497672] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [189.497773] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [189.497885] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [189.497990] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [189.498092] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:153:plane 1C] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [189.498194] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [189.498295] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:183:plane 2C] fb: [NOFB], visible: no <7> [189.498395] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:213:plane 3C] fb: [NOFB], visible: no <7> [189.498494] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:243:plane 4C] fb: [NOFB], visible: no <7> [189.498594] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:253:plane 5C] fb: [NOFB], visible: no <7> [189.498699] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:263:cursor C] fb: [NOFB], visible: no <7> [189.499381] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:539:HDMI-A-3][ENCODER:538:DDI TC3/PHY H] Disable audio codec on [CRTC:269:pipe C] <7> [189.525679] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe C <7> [189.542099] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x4, on? 1) for [CRTC:269:pipe C] <7> [189.544736] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3 <7> [189.545677] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F] <7> [189.546256] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A] <7> [189.546771] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B] <7> [189.547317] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C] <7> [189.547735] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D] <7> [189.548210] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G] <7> [189.548625] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A] <7> [189.549050] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B] <7> [189.549409] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C] <7> [189.549743] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D] <7> [189.550110] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H] <7> [189.550444] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I] <7> [189.550745] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A] <7> [189.551091] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B] <7> [189.551385] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C] <7> [189.551658] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D] <7> [189.552193] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [189.552688] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [189.553478] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7> [189.553965] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xaa000000) <7> [189.554443] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [189.554678] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:539:HDMI-A-3] <7> [189.554923] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe C] <7> [189.579994] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [189.580938] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [189.581712] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [189.582543] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [189.583322] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [190.897584] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [190.897941] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [190.902315] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [190.906832] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [190.907280] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [190.907729] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [190.908342] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [190.912718] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [190.926147] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [190.928406] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [190.930166] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [190.935213] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [190.936726] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [190.946181] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [190.946385] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [190.946586] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [190.952952] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [190.955028] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [190.957125] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [190.959102] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [190.961229] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [190.963245] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [190.965270] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [190.967224] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [190.971374] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [190.973305] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [190.975301] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [190.977222] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [190.979288] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [190.981253] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [190.983273] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [190.985251] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [190.986979] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [190.986994] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [190.987001] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [190.987007] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [190.987013] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [190.987019] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [190.987026] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [190.987034] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [190.987041] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [190.987072] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [190.987298] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [190.988925] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [190.989114] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [190.990716] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [190.991264] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [190.991363] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [190.991804] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [190.991911] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [190.991915] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.992008] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [190.993363] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [190.993366] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [190.993458] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [191.018432] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [191.018437] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [191.018440] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [191.018443] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48. <7> [191.018446] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [191.018449] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [191.018452] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV <7> [191.018456] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [191.018459] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3 <7> [191.018829] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [191.018926] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [191.019367] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [191.019451] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [191.019463] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [191.023580] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [191.092153] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [191.093200] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [191.094020] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [191.095005] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [191.095784] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [192.426090] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [192.426743] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [192.431689] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [192.436279] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [192.436741] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [192.437332] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [192.437915] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [192.442316] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [192.458675] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [192.460924] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [192.462756] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [192.466781] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [192.468266] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [192.477409] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [192.477565] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [192.477705] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [192.483764] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [192.485924] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [192.487968] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [192.490028] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [192.492079] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [192.494116] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [192.496051] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [192.498115] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [192.502047] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [192.504123] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [192.506101] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [192.508072] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [192.510162] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [192.512147] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [192.514255] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [192.516210] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [192.517884] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [192.517897] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [192.517903] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [192.517909] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [192.517914] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [192.517919] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [192.517925] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [192.517932] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [192.517938] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [192.517963] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [192.518166] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [192.519870] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [192.520037] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [192.521617] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [192.522153] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [192.522253] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [192.522703] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [192.522799] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [192.522814] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [192.522908] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [192.524262] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [192.524266] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [192.524363] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [192.549358] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [192.549364] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [192.549367] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [192.549370] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48. <7> [192.549372] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [192.549375] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [192.549379] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV <7> [192.549383] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [192.549386] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3 <7> [192.549758] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [192.549872] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [192.550318] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [192.550415] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [192.550430] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [192.554638] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [192.627976] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [192.628964] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [192.629727] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [192.630455] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [192.631220] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [193.960850] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [193.961776] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [193.966621] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [193.971480] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [193.971995] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [193.972596] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [193.973197] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [193.977664] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [193.991186] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [193.993558] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [193.995443] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [193.999994] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [194.001484] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [194.010847] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [194.011032] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [194.011192] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [194.017360] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [194.019279] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [194.021195] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [194.023190] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [194.025231] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [194.027189] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [194.029195] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [194.031211] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [194.035163] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [194.037255] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [194.039251] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [194.041198] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [194.043202] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [194.045197] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [194.047255] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [194.049209] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [194.050944] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [194.050958] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [194.050965] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [194.050970] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [194.050975] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [194.050981] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [194.050988] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [194.050994] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [194.051001] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [194.051026] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [194.051238] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [194.052899] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [194.053072] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [194.054653] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [194.055197] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [194.055301] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [194.055749] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [194.055853] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [194.055857] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [194.055949] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [194.057297] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [194.057301] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [194.057400] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [194.082383] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [194.082388] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [194.082391] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [194.082394] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48. <7> [194.082397] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [194.082400] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [194.082403] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV <7> [194.082407] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [194.082410] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3 <7> [194.082784] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [194.082896] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [194.083341] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [194.083436] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [194.083449] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [194.087592] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [194.156061] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [194.157080] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [194.157936] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [194.158716] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [194.159558] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [195.283461] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [195.284173] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [195.288819] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [195.293463] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [195.294291] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [195.295228] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [195.296202] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [195.300659] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [195.315229] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [195.317700] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [195.319703] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [195.324849] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [195.326382] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [195.337850] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [195.338113] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [195.338301] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [195.344582] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [195.346514] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [195.348445] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [195.350363] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [195.352280] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [195.354262] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [195.356232] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [195.358256] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [195.362295] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [195.364265] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [195.366261] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [195.368246] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [195.370257] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [195.372232] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [195.374263] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [195.376248] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [195.378034] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [195.378051] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [195.378060] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [195.378067] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [195.378074] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [195.378081] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [195.378090] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [195.378099] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [195.378107] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [195.378138] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [195.378419] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [195.380090] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [195.380307] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [195.381959] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [195.382509] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [195.382606] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [195.383052] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [195.383154] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [195.383157] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [195.383249] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [195.384614] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [195.384618] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [195.384712] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [195.409684] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [195.409689] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [195.409692] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [195.409695] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48. <7> [195.409697] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [195.409700] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [195.409704] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV <7> [195.409707] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [195.409711] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3 <7> [195.410075] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [195.410177] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [195.410624] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [195.410725] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [195.410738] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [195.414971] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [195.485068] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [195.486081] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [195.486934] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [195.487719] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [195.488553] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [196.804140] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [196.804879] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [196.809580] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [196.814235] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [196.814946] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [196.815768] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [196.816659] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [196.820551] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [196.831124] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [196.832933] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [196.835558] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [196.839513] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [196.840714] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [196.850473] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [196.850925] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [196.851048] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [196.856646] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [196.858635] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [196.860631] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [196.862615] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [196.864606] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [196.866601] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [196.868633] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [196.870553] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [196.874476] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [196.876474] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [196.878466] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [196.880482] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [196.882498] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [196.884548] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [196.886572] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [196.888659] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [196.890260] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [196.890270] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [196.890275] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [196.890279] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [196.890283] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [196.890287] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [196.890293] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [196.890298] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [196.890303] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [196.890343] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [196.890686] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [196.892035] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [196.892463] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [196.893922] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [196.894568] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [196.894675] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [196.895030] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [196.895138] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [196.895142] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [196.895233] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [196.896474] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [196.896477] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [196.896577] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [196.921444] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [196.921449] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [196.921452] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [196.921455] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48. <7> [196.921457] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [196.921460] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [196.921464] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV <7> [196.921467] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [196.921471] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3 <7> [196.921732] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [196.921841] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [196.922179] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [196.922299] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [196.922316] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [196.926575] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [196.996130] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [196.997034] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [196.997737] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [196.998476] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [196.999180] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [198.130698] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [198.131465] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [198.136272] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [198.140991] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [198.141688] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [198.142654] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [198.143648] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [198.147698] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [198.158509] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [198.160501] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [198.161979] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [198.166071] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [198.167480] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [198.177253] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [198.177790] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [198.177947] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [198.184186] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [198.186062] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [198.187990] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [198.189840] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [198.191726] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [198.193850] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [198.195710] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [198.197841] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [198.201664] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [198.203705] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [198.205753] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [198.207682] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [198.209744] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [198.211876] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [198.213816] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [198.215719] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [198.217642] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [198.217678] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [198.217697] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [198.217713] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [198.217729] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [198.217745] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [198.217766] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [198.218229] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [198.218235] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [198.218257] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [198.218421] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [198.219922] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [198.220357] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [198.221680] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [198.222362] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [198.222509] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [198.222848] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [198.222945] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [198.222949] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [198.223043] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [198.224290] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [198.224293] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [198.224387] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [198.249238] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [198.249242] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [198.249245] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [198.249248] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48. <7> [198.249251] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [198.249254] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [198.249257] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV <7> [198.249261] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [198.249264] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3 <7> [198.249518] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [198.249616] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [198.249952] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [198.250044] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [198.250058] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [198.254206] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [198.324088] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [198.325015] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [198.325694] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [198.326416] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [198.327284] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [199.451506] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [199.452266] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [199.457059] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [199.461738] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [199.462595] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [199.463569] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [199.464574] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [199.469462] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [199.483906] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [199.486329] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [199.488275] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [199.493759] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [199.495645] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [199.508577] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [199.508816] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [199.509025] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [199.515406] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [199.517335] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [199.519268] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [199.521236] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [199.523200] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [199.525183] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [199.527226] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [199.529222] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [199.533139] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [199.535116] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [199.537094] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [199.539072] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [199.541180] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [199.543193] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [199.545230] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [199.547221] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [199.548940] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [199.548956] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [199.548963] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [199.548969] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [199.548976] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [199.548982] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [199.548990] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [199.548998] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [199.549005] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [199.549033] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [199.549284] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [199.551046] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [199.551247] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [199.553513] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [199.554047] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [199.554147] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [199.554595] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [199.554690] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [199.554694] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [199.554800] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [199.556156] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [199.556160] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [199.556255] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [199.581220] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [199.581225] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [199.581228] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [199.581230] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48. <7> [199.581233] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [199.581236] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [199.581240] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV <7> [199.581243] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [199.581247] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3 <7> [199.581614] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [199.581709] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [199.582164] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [199.582261] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [199.582274] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [199.586417] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [199.660074] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [199.661098] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [199.661950] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [199.662919] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [199.663847] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [200.972543] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [200.973244] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [200.978560] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [200.983385] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [200.984114] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [200.984949] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [200.985795] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [200.990447] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [201.004865] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [201.007254] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [201.009183] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [201.014317] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [201.016105] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [201.026652] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [201.026920] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [201.027144] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [201.033402] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [201.035319] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [201.037228] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [201.039200] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [201.041219] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [201.043216] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [201.045211] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [201.047214] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [201.051319] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [201.053256] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [201.055226] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [201.057244] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [201.059222] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [201.061243] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [201.063241] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [201.065227] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [201.066979] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [201.066998] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [201.067006] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [201.067013] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [201.067021] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [201.067028] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [201.067038] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [201.067046] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [201.067056] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [201.067089] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [201.067363] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [201.069011] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [201.069252] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [201.070856] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [201.071428] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [201.071526] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [201.071971] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [201.072064] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [201.072068] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [201.072160] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [201.073519] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [201.073523] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [201.073624] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [201.098645] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [201.098649] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [201.098652] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [201.098655] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48. <7> [201.098658] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [201.098661] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [201.098665] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV <7> [201.098668] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [201.098671] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3 <7> [201.099036] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [201.099131] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [201.099576] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [201.099671] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [201.099685] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [201.103827] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [201.172093] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [201.173122] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [201.173988] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [201.174766] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [201.175619] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <6> [202.123156] xe 0000:03:00.0: [drm] PL2 disabled for channel 0, val 0x00000000 <7> [203.499608] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [203.500316] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1] <7> [203.505056] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1] <7> [203.509720] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2] <7> [203.510408] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [203.511248] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [203.512071] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [203.515858] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [203.526476] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [203.528485] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [203.529949] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [203.534009] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [203.535402] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [203.545259] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [203.545649] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [203.545763] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [203.551465] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [203.553289] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [203.555277] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [203.557265] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [203.559266] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [203.561260] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [203.563262] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [203.565286] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [203.569026] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [203.571109] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [203.573220] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [203.575235] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [203.577239] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [203.579257] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [203.581267] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [203.583298] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [203.585105] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [203.585130] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30. <7> [203.585143] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36. <7> [203.585157] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48. <7> [203.585170] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [203.585183] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color. <7> [203.585200] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435 <7> [203.585215] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [203.585232] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3 <7> [203.585287] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no <7> [203.585605] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [203.587110] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [203.587470] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [203.588852] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2] <7> [203.589449] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [203.589552] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [203.589898] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [203.589992] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [203.589996] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [203.590097] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [203.591352] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [203.591355] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [203.591452] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3] <7> [203.616332] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [203.616337] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30. <7> [203.616340] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36. <7> [203.616342] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48. <7> [203.616345] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [203.616348] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [203.616352] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV <7> [203.616355] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [203.616359] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3 <7> [203.616621] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [203.616714] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [203.617067] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [203.617159] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [203.617173] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3] <7> [203.621395] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4] <7> [203.625762] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [203.625893] xe 0000:03:00.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [203.626004] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [203.626115] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A] <7> [203.626225] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [203.626334] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [203.626437] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2 <7> [203.626579] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [203.626669] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [203.626785] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037 <7> [203.626867] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59 <7> [203.626944] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [203.627020] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 <7> [203.627094] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 <7> [203.627169] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 <7> [203.627257] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 594000 num active planes 1 <7> [203.627368] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000 <7> [203.627478] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000 <7> [203.627583] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624 <7> [203.627701] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz <7> [203.627842] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated TC PLL 2 <7> [203.627947] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving TC PLL 2 <7> [203.628054] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset] <7> [203.628169] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [203.628279] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [203.628387] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [203.628493] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [203.628598] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [203.628703] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [203.628816] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 <7> [203.628920] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [203.629028] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [203.629135] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [203.629240] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [203.629343] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7> [203.629445] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [203.629547] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00 <7> [203.629649] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11 <7> [203.629750] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00 <7> [203.629860] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [203.629965] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [203.630065] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36 <7> [203.630166] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125 <7> [203.630267] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [203.630367] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [203.630468] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [203.630568] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [203.630671] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [203.630784] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [203.630893] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pixel rate 148500, min cdclk 192000, min voltage level 0 <7> [203.630997] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [203.631099] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [203.631200] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0 <7> [203.631306] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [203.631413] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [203.631516] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [203.631619] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [203.631722] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [203.631834] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000 <7> [203.631935] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [203.632039] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c <7> [203.632145] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110 <7> [203.632249] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c <7> [203.632352] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1 <7> [203.632453] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a <7> [203.632555] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81 <7> [203.632656] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000 <7> [203.632757] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001 <7> [203.632869] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000 <7> [203.632971] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [203.633071] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000 <7> [203.633172] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00 <7> [203.633272] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [203.633372] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [203.633472] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [203.633571] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [203.633670] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [203.633769] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [203.633882] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [203.633993] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [203.634097] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [203.634199] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [203.634303] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [203.634406] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [203.634512] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [203.634620] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [203.634724] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [203.634840] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [203.634944] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [203.635047] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [203.635156] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [203.635271] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [203.635700] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [203.635848] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000) <7> [203.635965] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [203.636302] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F] <7> [203.636404] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A] <7> [203.636503] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B] <7> [203.636598] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C] <7> [203.636692] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D] <7> [203.636799] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G] <7> [203.636899] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A] <7> [203.636993] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B] <7> [203.637086] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C] <7> [203.637179] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D] <7> [203.637279] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H] <7> [203.637382] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I] <7> [203.637482] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A] <7> [203.637577] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B] <7> [203.637678] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C] <7> [203.637788] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D] <7> [203.638105] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [203.638287] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [203.638590] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [203.638711] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:151:pipe A] <7> [203.638833] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2 <7> [203.643808] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [203.648553] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [203.649576] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [203.650024] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a <7> [203.651527] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [203.652103] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1 <7> [203.659840] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Clock recovery OK <7> [203.659992] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3 <7> [203.667868] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful <7> [203.668181] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4 <7> [203.669512] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [203.687492] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G] Enable audio codec on [CRTC:151:pipe A], 40 bytes ELD <7> [203.704191] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:527:DP-2] <7> [203.705070] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A] <7> [203.710489] xe 0000:03:00.0: [drm:intel_hdmi_compute_output_format [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [203.710888] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [203.711291] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe C] <7> [203.711677] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe C] fastset requirement not met in hw.active (expected no, found yes) <7> [203.712081] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] fastset requirement not met, forcing full modeset <7> [203.712420] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe C] releasing TC PLL 3 <7> [203.712860] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [203.713140] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x5 <7> [203.713380] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe C] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x5 <7> [203.713673] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989 <7> [203.713904] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59 <7> [203.714104] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:153:plane 1C] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989 <7> [203.714295] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:263:cursor C] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59 <7> [203.714484] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,*stwm <7> [203.714672] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 <7> [203.714905] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 <7> [203.715087] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 <7> [203.715288] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe C] data rate 594000 num active planes 1 <7> [203.715540] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000 <7> [203.715811] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000 <7> [203.716050] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248 <7> [203.716294] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz <7> [203.716524] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:269:pipe C] allocated TC PLL 3 <7> [203.716724] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:269:pipe C] reserving TC PLL 3 <7> [203.716944] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe C] enable: yes [modeset] <7> [203.717154] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [203.717350] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: C, pipe bpp: 36, dithering: 0 <7> [203.717540] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [203.717726] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [203.717921] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [203.718097] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [203.718271] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [203.718439] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [203.718596] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [203.718599] xe 0000:03:00.0: colorspace: RGB <7> [203.718601] xe 0000:03:00.0: scan mode: Underscan <7> [203.718603] xe 0000:03:00.0: colorimetry: No Data <7> [203.718604] xe 0000:03:00.0: picture aspect: 16:9 <7> [203.718606] xe 0000:03:00.0: active aspect: Same as Picture <7> [203.718608] xe 0000:03:00.0: itc: No Data <7> [203.718610] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [203.718612] xe 0000:03:00.0: quantization range: Default <7> [203.718614] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [203.718616] xe 0000:03:00.0: video code: 16 <7> [203.718618] xe 0000:03:00.0: ycc quantization range: Full <7> [203.718619] xe 0000:03:00.0: hdmi content type: Graphics <7> [203.718621] xe 0000:03:00.0: pixel repeat: 0 <7> [203.718623] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [203.718625] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [203.718628] xe 0000:03:00.0: vendor: Intel <7> [203.718630] xe 0000:03:00.0: product: Discrete gfx <7> [203.718632] xe 0000:03:00.0: source device information: PC General (0x9) <7> [203.718634] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [203.718636] xe 0000:03:00.0: empty frame <7> [203.718638] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00 <7> [203.718803] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51 <7> [203.718960] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00 <7> [203.719112] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [203.719263] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [203.719409] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36 <7> [203.719543] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [203.719676] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [203.719819] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [203.719958] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [203.720087] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [203.720221] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [203.720377] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [203.720500] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pixel rate 148500, min cdclk 192000, min voltage level 0 <7> [203.720616] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [203.720731] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [203.720860] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0 <7> [203.720981] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [203.721094] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [203.721203] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [203.721308] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [203.721411] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [203.721512] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [203.721610] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [203.721709] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8 <7> [203.721833] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [203.721934] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06 <7> [203.722038] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [203.722140] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [203.722241] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [203.722343] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [203.722447] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [203.722549] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400 <7> [203.722649] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [203.722749] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [203.722861] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [203.722969] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [203.723074] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [203.723177] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [203.723279] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [203.723380] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [203.723482] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [203.723584] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [203.723683] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [203.723794] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [203.723899] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [203.723999] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [203.724100] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [203.724201] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:153:plane 1C] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [203.724302] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [203.724402] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [203.724503] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:183:plane 2C] fb: [NOFB], visible: no <7> [203.724602] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:213:plane 3C] fb: [NOFB], visible: no <7> [203.724702] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:243:plane 4C] fb: [NOFB], visible: no <7> [203.724813] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:253:plane 5C] fb: [NOFB], visible: no <7> [203.724920] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:263:cursor C] fb: [NOFB], visible: no <7> [203.725836] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [203.725967] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x88000000) <7> [203.726085] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F] <7> [203.726184] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A] <7> [203.726278] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B] <7> [203.726368] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C] <7> [203.726456] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D] <7> [203.726546] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G] <7> [203.726635] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A] <7> [203.726721] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B] <7> [203.726817] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C] <7> [203.726910] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D] <7> [203.727001] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H] <7> [203.727089] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I] <7> [203.727176] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A] <7> [203.727263] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B] <7> [203.727354] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C] <7> [203.727443] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D] <7> [203.737027] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [203.737361] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A) <7> [203.753669] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x4, on? 0) for [CRTC:269:pipe C] <7> [203.754042] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3 <7> [203.756702] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe C <7> [203.771821] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [203.775971] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:539:HDMI-A-3][ENCODER:538:DDI TC3/PHY H] Enable audio codec on [CRTC:269:pipe C], 36 bytes ELD <7> [203.792534] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000) <7> [203.793281] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N <7> [203.794273] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:539:HDMI-A-3] <7> [203.795048] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe C] <6> [203.802302] [IGT] xe_pm: finished subtest d3hot-mmap-vram, SUCCESS <7> [203.821287] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [203.823326] [IGT] xe_pm: exiting, ret=0 <6> [203.843101] Console: switching to colour frame buffer device 240x67

<6> [189.333598] Console: switching to colour dummy device 80x25

<6> [189.411150] [IGT] xe_pm: starting subtest d3hot-mmap-vram

<7> [189.412781] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [189.413147] xe 0000:03:00.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [189.413446] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [189.413757] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A]

<7> [189.414105] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [189.414437] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [189.414747] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2

<7> [189.415159] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xd (total dbuf slices 0xf), mbus joined? no->no

<7> [189.415413] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x5 -> 0x4

<7> [189.415695] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0

<7> [189.415949] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0

<7> [189.416181] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [189.416383] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [189.416587] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [189.416780] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [189.417150] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 0 num active planes 0

<7> [189.417424] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000

<7> [189.417678] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000

<7> [189.417940] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624

<7> [189.418231] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz

<7> [189.418490] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated TC PLL 2

<7> [189.418706] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving TC PLL 2

<7> [189.418941] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]

<7> [189.419179] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [189.419395] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0

<7> [189.419549] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [189.419655] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [189.419763] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [189.419887] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [189.420001] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64

<7> [189.420104] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [189.420205] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [189.420307] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [189.420408] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [189.420509] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0

<7> [189.420609] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [189.420709] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00

<7> [189.420810] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11

<7> [189.420923] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00

<7> [189.421035] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [189.421140] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [189.421245] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36

<7> [189.421348] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125

<7> [189.421449] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [189.421549] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [189.421650] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [189.421752] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [189.421866] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [189.421983] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [189.422087] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pixel rate 148500, min cdclk 192000, min voltage level 0

<7> [189.422190] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [189.422292] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [189.422395] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0

<7> [189.422497] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [189.422599] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [189.422700] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [189.422802] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [189.422916] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [189.423035] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000

<7> [189.423142] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [189.423246] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c

<7> [189.423349] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110

<7> [189.423451] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c

<7> [189.423552] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1

<7> [189.423652] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a

<7> [189.423753] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81

<7> [189.423861] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000

<7> [189.423972] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001

<7> [189.424073] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000

<7> [189.424173] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [189.424273] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000

<7> [189.424376] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00

<7> [189.424482] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [189.424587] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [189.424689] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [189.424794] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [189.424909] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [189.425021] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [189.425123] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [189.425223] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [189.425327] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [189.425434] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [189.425542] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [189.425644] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [189.425747] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [189.425856] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [189.425974] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [189.426080] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [189.426185] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [189.426288] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [189.426390] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [189.426805] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G] Disable audio codec on [CRTC:151:pipe A]

<7> [189.454930] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [189.472100] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [189.475036] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:151:pipe A]

<7> [189.477629] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2

<7> [189.478536] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F]

<7> [189.479105] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A]

<7> [189.479649] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B]

<7> [189.480148] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C]

<7> [189.480580] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D]

<7> [189.481021] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G]

<7> [189.481398] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A]

<7> [189.481753] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B]

<7> [189.482141] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C]

<7> [189.482492] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D]

<7> [189.482789] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H]

<7> [189.483137] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I]

<7> [189.483470] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A]

<7> [189.483752] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B]

<7> [189.484075] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C]

<7> [189.484362] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D]

<7> [189.486486] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [189.486906] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xd

<7> [189.487600] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A

<7> [189.487815] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x8a000000)

<7> [189.488275] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:527:DP-2]

<7> [189.488474] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]

<7> [189.489229] xe 0000:03:00.0: [drm:intel_hdmi_compute_output_format [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [189.489408] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [189.489576] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe C]

<7> [189.489741] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe C] fastset requirement not met in hw.active (expected yes, found no)

<7> [189.489924] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] fastset requirement not met, forcing full modeset

<7> [189.490080] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe C] releasing TC PLL 3

<7> [189.490253] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xd -> 0x1 (total dbuf slices 0xf), mbus joined? no->no

<7> [189.490377] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe C] dbuf slices 0xc -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x4 -> 0x0

<7> [189.490512] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:153:plane 1C] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0

<7> [189.490624] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:263:cursor C] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0

<7> [189.490729] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [189.490829] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [189.490948] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [189.491047] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [189.491155] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe C] data rate 0 num active planes 0

<7> [189.491292] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000

<7> [189.491424] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000

<7> [189.491543] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0

<7> [189.491690] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz

<7> [189.491828] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:269:pipe C] allocated TC PLL 3

<7> [189.491960] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:269:pipe C] reserving TC PLL 3

<7> [189.492067] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe C] enable: yes [modeset]

<7> [189.492186] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [189.492299] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: C, pipe bpp: 36, dithering: 0

<7> [189.492409] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [189.492518] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [189.492620] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [189.492720] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [189.492820] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [189.492942] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [189.493051] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [189.493055] xe 0000:03:00.0: scan mode: Underscan

<7> [189.493056] xe 0000:03:00.0: colorimetry: No Data

<7> [189.493057] xe 0000:03:00.0: picture aspect: 16:9

<7> [189.493058] xe 0000:03:00.0: active aspect: Same as Picture

<7> [189.493061] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [189.493062] xe 0000:03:00.0: quantization range: Default

<7> [189.493063] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [189.493066] xe 0000:03:00.0: ycc quantization range: Full

<7> [189.493067] xe 0000:03:00.0: hdmi content type: Graphics

<7> [189.493070] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [189.493071] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [189.493074] xe 0000:03:00.0: product: Discrete gfx

<7> [189.493075] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [189.493077] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [189.493079] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00

<7> [189.493184] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51

<7> [189.493287] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00

<7> [189.493389] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [189.493489] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [189.493589] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36

<7> [189.493689] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [189.493788] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [189.493896] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [189.494005] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [189.494112] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [189.494215] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [189.494321] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [189.494426] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pixel rate 148500, min cdclk 192000, min voltage level 0

<7> [189.494528] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [189.494630] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [189.494735] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0

<7> [189.494850] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [189.494959] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [189.495061] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [189.495163] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [189.495264] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [189.495365] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [189.495466] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [189.495567] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8

<7> [189.495667] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [189.495768] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06

<7> [189.495882] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [189.495993] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [189.496100] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [189.496207] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [189.496315] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [189.496422] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400

<7> [189.496526] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [189.496628] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [189.496729] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [189.496831] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [189.496946] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [189.497053] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [189.497160] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [189.497266] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [189.497369] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [189.497471] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [189.497572] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [189.497672] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [189.497773] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [189.497885] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [189.497990] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [189.498092] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:153:plane 1C] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [189.498194] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [189.498295] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:183:plane 2C] fb: [NOFB], visible: no

<7> [189.498395] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:213:plane 3C] fb: [NOFB], visible: no

<7> [189.498494] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:243:plane 4C] fb: [NOFB], visible: no

<7> [189.498594] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:253:plane 5C] fb: [NOFB], visible: no

<7> [189.498699] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:263:cursor C] fb: [NOFB], visible: no

<7> [189.499381] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:539:HDMI-A-3][ENCODER:538:DDI TC3/PHY H] Disable audio codec on [CRTC:269:pipe C]

<7> [189.525679] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe C

<7> [189.542099] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x4, on? 1) for [CRTC:269:pipe C]

<7> [189.544736] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3

<7> [189.545677] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F]

<7> [189.546256] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A]

<7> [189.546771] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B]

<7> [189.547317] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C]

<7> [189.547735] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D]

<7> [189.548210] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G]

<7> [189.548625] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A]

<7> [189.549050] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B]

<7> [189.549409] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C]

<7> [189.549743] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D]

<7> [189.550110] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H]

<7> [189.550444] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I]

<7> [189.550745] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A]

<7> [189.551091] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B]

<7> [189.551385] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C]

<7> [189.551658] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D]

<7> [189.552193] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [189.552688] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [189.553478] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C

<7> [189.553965] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xaa000000)

<7> [189.554443] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [189.554678] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [189.554923] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe C]

<7> [189.579994] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [189.580938] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [189.581712] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [189.582543] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [189.583322] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [190.897584] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [190.897941] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [190.902315] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [190.906832] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [190.907280] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [190.907729] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [190.908342] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [190.912718] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [190.926147] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [190.928406] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [190.930166] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [190.935213] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [190.936726] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [190.946181] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [190.946385] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [190.946586] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [190.952952] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [190.955028] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [190.957125] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [190.959102] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [190.961229] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [190.963245] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [190.965270] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [190.967224] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [190.971374] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [190.973305] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [190.975301] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [190.977222] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [190.979288] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [190.981253] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [190.983273] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [190.985251] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [190.986979] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [190.986994] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [190.987001] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [190.987007] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [190.987013] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [190.987019] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [190.987026] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [190.987034] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [190.987041] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [190.987072] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [190.987298] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [190.988925] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [190.989114] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [190.990716] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [190.991264] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [190.991363] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [190.991804] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [190.991911] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [190.991915] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [190.992008] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [190.993363] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [190.993366] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [190.993458] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [191.018432] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [191.018437] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [191.018440] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [191.018443] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.

<7> [191.018446] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [191.018449] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [191.018452] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV

<7> [191.018456] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [191.018459] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3

<7> [191.018829] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [191.018926] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [191.019367] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [191.019451] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [191.019463] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [191.023580] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [191.092153] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [191.093200] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [191.094020] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [191.095005] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [191.095784] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [192.426090] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [192.426743] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [192.431689] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [192.436279] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [192.436741] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [192.437332] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [192.437915] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [192.442316] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [192.458675] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [192.460924] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [192.462756] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [192.466781] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [192.468266] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [192.477409] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [192.477565] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [192.477705] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [192.483764] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [192.485924] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [192.487968] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [192.490028] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [192.492079] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [192.494116] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [192.496051] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [192.498115] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [192.502047] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [192.504123] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [192.506101] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [192.508072] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [192.510162] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [192.512147] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [192.514255] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [192.516210] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [192.517884] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [192.517897] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [192.517903] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [192.517909] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [192.517914] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [192.517919] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [192.517925] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [192.517932] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [192.517938] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [192.517963] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [192.518166] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [192.519870] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [192.520037] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [192.521617] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [192.522153] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [192.522253] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [192.522703] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [192.522799] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [192.522814] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [192.522908] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [192.524262] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [192.524266] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [192.524363] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [192.549358] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [192.549364] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [192.549367] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [192.549370] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.

<7> [192.549372] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [192.549375] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [192.549379] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV

<7> [192.549383] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [192.549386] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3

<7> [192.549758] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [192.549872] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [192.550318] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [192.550415] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [192.550430] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [192.554638] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [192.627976] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [192.628964] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [192.629727] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [192.630455] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [192.631220] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [193.960850] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [193.961776] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [193.966621] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [193.971480] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [193.971995] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [193.972596] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [193.973197] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [193.977664] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [193.991186] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [193.993558] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [193.995443] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [193.999994] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [194.001484] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [194.010847] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [194.011032] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [194.011192] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [194.017360] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [194.019279] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [194.021195] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [194.023190] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [194.025231] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [194.027189] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [194.029195] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [194.031211] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [194.035163] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [194.037255] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [194.039251] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [194.041198] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [194.043202] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [194.045197] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [194.047255] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [194.049209] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [194.050944] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [194.050958] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [194.050965] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [194.050970] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [194.050975] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [194.050981] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [194.050988] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [194.050994] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [194.051001] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [194.051026] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [194.051238] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [194.052899] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [194.053072] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [194.054653] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [194.055197] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [194.055301] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [194.055749] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [194.055853] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [194.055857] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [194.055949] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [194.057297] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [194.057301] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [194.057400] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [194.082383] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [194.082388] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [194.082391] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [194.082394] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.

<7> [194.082397] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [194.082400] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [194.082403] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV

<7> [194.082407] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [194.082410] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3

<7> [194.082784] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [194.082896] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [194.083341] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [194.083436] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [194.083449] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [194.087592] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [194.156061] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [194.157080] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [194.157936] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [194.158716] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [194.159558] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [195.283461] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [195.284173] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [195.288819] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [195.293463] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [195.294291] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [195.295228] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [195.296202] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [195.300659] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [195.315229] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [195.317700] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [195.319703] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [195.324849] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [195.326382] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [195.337850] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [195.338113] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [195.338301] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [195.344582] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [195.346514] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [195.348445] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [195.350363] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [195.352280] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [195.354262] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [195.356232] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [195.358256] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [195.362295] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [195.364265] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [195.366261] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [195.368246] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [195.370257] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [195.372232] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [195.374263] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [195.376248] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [195.378034] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [195.378051] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [195.378060] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [195.378067] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [195.378074] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [195.378081] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [195.378090] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [195.378099] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [195.378107] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [195.378138] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [195.378419] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [195.380090] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [195.380307] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [195.381959] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [195.382509] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [195.382606] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [195.383052] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [195.383154] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [195.383157] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [195.383249] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [195.384614] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [195.384618] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [195.384712] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [195.409684] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [195.409689] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [195.409692] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [195.409695] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.

<7> [195.409697] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [195.409700] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [195.409704] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV

<7> [195.409707] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [195.409711] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3

<7> [195.410075] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [195.410177] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [195.410624] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [195.410725] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [195.410738] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [195.414971] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [195.485068] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [195.486081] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [195.486934] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [195.487719] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [195.488553] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [196.804140] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [196.804879] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [196.809580] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [196.814235] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [196.814946] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [196.815768] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [196.816659] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [196.820551] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [196.831124] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [196.832933] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [196.835558] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [196.839513] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [196.840714] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [196.850473] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [196.850925] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [196.851048] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [196.856646] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [196.858635] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [196.860631] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [196.862615] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [196.864606] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [196.866601] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [196.868633] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [196.870553] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [196.874476] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [196.876474] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [196.878466] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [196.880482] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [196.882498] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [196.884548] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [196.886572] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [196.888659] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [196.890260] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [196.890270] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [196.890275] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [196.890279] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [196.890283] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [196.890287] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [196.890293] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [196.890298] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [196.890303] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [196.890343] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [196.890686] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [196.892035] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [196.892463] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [196.893922] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [196.894568] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [196.894675] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [196.895030] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [196.895138] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [196.895142] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [196.895233] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [196.896474] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [196.896477] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [196.896577] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [196.921444] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [196.921449] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [196.921452] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [196.921455] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.

<7> [196.921457] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [196.921460] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [196.921464] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV

<7> [196.921467] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [196.921471] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3

<7> [196.921732] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [196.921841] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [196.922179] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [196.922299] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [196.922316] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [196.926575] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [196.996130] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [196.997034] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [196.997737] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [196.998476] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [196.999180] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [198.130698] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [198.131465] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [198.136272] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [198.140991] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [198.141688] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [198.142654] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [198.143648] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [198.147698] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [198.158509] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [198.160501] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [198.161979] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [198.166071] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [198.167480] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [198.177253] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [198.177790] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [198.177947] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [198.184186] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [198.186062] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [198.187990] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [198.189840] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [198.191726] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [198.193850] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [198.195710] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [198.197841] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [198.201664] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [198.203705] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [198.205753] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [198.207682] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [198.209744] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [198.211876] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [198.213816] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [198.215719] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [198.217642] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [198.217678] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [198.217697] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [198.217713] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [198.217729] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [198.217745] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [198.217766] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [198.218229] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [198.218235] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [198.218257] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [198.218421] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [198.219922] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [198.220357] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [198.221680] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [198.222362] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [198.222509] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [198.222848] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [198.222945] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [198.222949] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [198.223043] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [198.224290] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [198.224293] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [198.224387] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [198.249238] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [198.249242] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [198.249245] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [198.249248] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.

<7> [198.249251] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [198.249254] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [198.249257] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV

<7> [198.249261] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [198.249264] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3

<7> [198.249518] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [198.249616] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [198.249952] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [198.250044] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [198.250058] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [198.254206] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [198.324088] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [198.325015] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [198.325694] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [198.326416] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [198.327284] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [199.451506] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [199.452266] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [199.457059] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [199.461738] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [199.462595] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [199.463569] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [199.464574] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [199.469462] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [199.483906] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [199.486329] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [199.488275] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [199.493759] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [199.495645] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [199.508577] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [199.508816] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [199.509025] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [199.515406] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [199.517335] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [199.519268] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [199.521236] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [199.523200] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [199.525183] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [199.527226] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [199.529222] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [199.533139] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [199.535116] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [199.537094] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [199.539072] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [199.541180] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [199.543193] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [199.545230] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [199.547221] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [199.548940] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [199.548956] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [199.548963] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [199.548969] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [199.548976] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [199.548982] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [199.548990] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [199.548998] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [199.549005] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [199.549033] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [199.549284] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [199.551046] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [199.551247] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [199.553513] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [199.554047] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [199.554147] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [199.554595] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [199.554690] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [199.554694] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [199.554800] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [199.556156] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [199.556160] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [199.556255] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [199.581220] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [199.581225] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [199.581228] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [199.581230] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.

<7> [199.581233] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [199.581236] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [199.581240] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV

<7> [199.581243] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [199.581247] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3

<7> [199.581614] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [199.581709] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [199.582164] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [199.582261] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [199.582274] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [199.586417] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [199.660074] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [199.661098] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [199.661950] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [199.662919] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [199.663847] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [200.972543] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [200.973244] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [200.978560] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [200.983385] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [200.984114] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [200.984949] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [200.985795] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [200.990447] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [201.004865] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [201.007254] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [201.009183] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [201.014317] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [201.016105] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [201.026652] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [201.026920] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [201.027144] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [201.033402] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [201.035319] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [201.037228] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [201.039200] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [201.041219] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [201.043216] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [201.045211] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [201.047214] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [201.051319] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [201.053256] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [201.055226] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [201.057244] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [201.059222] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [201.061243] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [201.063241] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [201.065227] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [201.066979] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [201.066998] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [201.067006] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [201.067013] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [201.067021] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [201.067028] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [201.067038] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [201.067046] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [201.067056] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [201.067089] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [201.067363] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [201.069011] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [201.069252] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [201.070856] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [201.071428] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [201.071526] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [201.071971] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [201.072064] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [201.072068] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [201.072160] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [201.073519] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [201.073523] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [201.073624] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [201.098645] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [201.098649] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [201.098652] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [201.098655] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.

<7> [201.098658] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [201.098661] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [201.098665] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV

<7> [201.098668] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [201.098671] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3

<7> [201.099036] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [201.099131] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [201.099576] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [201.099671] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [201.099685] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [201.103827] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [201.172093] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [201.173122] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [201.173988] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [201.174766] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [201.175619] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<6> [202.123156] xe 0000:03:00.0: [drm] PL2 disabled for channel 0, val 0x00000000

<7> [203.499608] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [203.500316] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]

<7> [203.505056] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]

<7> [203.509720] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]

<7> [203.510408] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [203.511248] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [203.512071] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [203.515858] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [203.526476] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [203.528485] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [203.529949] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [203.534009] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [203.535402] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:526:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [203.545259] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [203.545649] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [203.545763] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [203.551465] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [203.553289] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [203.555277] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [203.557265] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [203.559266] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [203.561260] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [203.563262] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [203.565286] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [203.569026] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [203.571109] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [203.573220] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [203.575235] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [203.577239] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [203.579257] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [203.581267] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [203.583298] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [203.585105] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [203.585130] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 30.

<7> [203.585143] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 36.

<7> [203.585157] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does deep color 48.

<7> [203.585170] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [203.585183] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [203.585200] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD monitor DPF90435

<7> [203.585215] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [203.585232] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:527:DP-2] ELD size 40, SAD count 3

<7> [203.585287] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] VRR capable: no

<7> [203.585605] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [203.587110] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [203.587470] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:527:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [203.588852] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]

<7> [203.589449] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [203.589552] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [203.589898] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [203.589992] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [203.589996] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [203.590097] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [203.591352] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [203.591355] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [203.591452] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [203.616332] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [203.616337] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 30.

<7> [203.616340] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 36.

<7> [203.616342] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does deep color 48.

<7> [203.616345] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [203.616348] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [203.616352] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD monitor Mi TV

<7> [203.616355] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [203.616359] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:539:HDMI-A-3] ELD size 36, SAD count 3

<7> [203.616621] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [203.616714] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [203.617067] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [203.617159] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [203.617173] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]

<7> [203.621395] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]

<7> [203.625762] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:526:DDI TC2/PHY G][CRTC:151:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [203.625893] xe 0000:03:00.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [203.626004] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [203.626115] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:526:DDI TC2/PHY G] [CRTC:151:pipe A]

<7> [203.626225] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [203.626334] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [203.626437] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing TC PLL 2

<7> [203.626579] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [203.626669] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [203.626785] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037

<7> [203.626867] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59

<7> [203.626944] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [203.627020] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0

<7> [203.627094] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255

<7> [203.627169] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267

<7> [203.627257] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 594000 num active planes 1

<7> [203.627368] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000

<7> [203.627478] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000

<7> [203.627583] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624

<7> [203.627701] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz

<7> [203.627842] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated TC PLL 2

<7> [203.627947] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving TC PLL 2

<7> [203.628054] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]

<7> [203.628169] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [203.628279] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0

<7> [203.628387] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [203.628493] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [203.628598] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [203.628703] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [203.628816] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64

<7> [203.628920] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [203.629028] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [203.629135] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [203.629240] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [203.629343] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0

<7> [203.629445] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [203.629547] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00

<7> [203.629649] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11

<7> [203.629750] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00

<7> [203.629860] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [203.629965] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [203.630065] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36

<7> [203.630166] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125

<7> [203.630267] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [203.630367] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [203.630468] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [203.630568] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [203.630671] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [203.630784] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [203.630893] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pixel rate 148500, min cdclk 192000, min voltage level 0

<7> [203.630997] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [203.631099] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [203.631200] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0

<7> [203.631306] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [203.631413] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [203.631516] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [203.631619] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [203.631722] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [203.631834] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000

<7> [203.631935] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [203.632039] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c

<7> [203.632145] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110

<7> [203.632249] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c

<7> [203.632352] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1

<7> [203.632453] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a

<7> [203.632555] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81

<7> [203.632656] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000

<7> [203.632757] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001

<7> [203.632869] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000

<7> [203.632971] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [203.633071] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000

<7> [203.633172] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00

<7> [203.633272] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [203.633372] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [203.633472] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [203.633571] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [203.633670] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [203.633769] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [203.633882] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [203.633993] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [203.634097] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [203.634199] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [203.634303] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [203.634406] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [203.634512] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [203.634620] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [203.634724] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [203.634840] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [203.634944] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [203.635047] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [203.635156] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [203.635271] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [203.635700] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [203.635848] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000)

<7> [203.635965] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [203.636302] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F]

<7> [203.636404] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A]

<7> [203.636503] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B]

<7> [203.636598] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C]

<7> [203.636692] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D]

<7> [203.636799] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G]

<7> [203.636899] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A]

<7> [203.636993] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B]

<7> [203.637086] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C]

<7> [203.637179] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D]

<7> [203.637279] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H]

<7> [203.637382] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I]

<7> [203.637482] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A]

<7> [203.637577] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B]

<7> [203.637678] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C]

<7> [203.637788] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D]

<7> [203.638105] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [203.638287] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [203.638590] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [203.638711] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:151:pipe A]

<7> [203.638833] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2

<7> [203.643808] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [203.648553] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [203.649576] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [203.650024] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a

<7> [203.651527] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [203.652103] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1

<7> [203.659840] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Clock recovery OK

<7> [203.659992] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3

<7> [203.667868] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful

<7> [203.668181] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4

<7> [203.669512] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [203.687492] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:527:DP-2][ENCODER:526:DDI TC2/PHY G] Enable audio codec on [CRTC:151:pipe A], 40 bytes ELD

<7> [203.704191] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:527:DP-2]

<7> [203.705070] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]

<7> [203.710489] xe 0000:03:00.0: [drm:intel_hdmi_compute_output_format [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [203.710888] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [203.711291] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:538:DDI TC3/PHY H] [CRTC:269:pipe C]

<7> [203.711677] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe C] fastset requirement not met in hw.active (expected no, found yes)

<7> [203.712081] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe C] fastset requirement not met, forcing full modeset

<7> [203.712420] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe C] releasing TC PLL 3

<7> [203.712860] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [203.713140] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x5

<7> [203.713380] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe C] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x5

<7> [203.713673] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989

<7> [203.713904] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59

<7> [203.714104] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:153:plane 1C] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989

<7> [203.714295] xe 0000:03:00.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:263:cursor C] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59

<7> [203.714484] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [203.714672] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0

<7> [203.714905] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255

<7> [203.715087] xe 0000:03:00.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:153:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267

<7> [203.715288] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe C] data rate 594000 num active planes 1

<7> [203.715540] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000

<7> [203.715811] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000

<7> [203.716050] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248

<7> [203.716294] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz

<7> [203.716524] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:269:pipe C] allocated TC PLL 3

<7> [203.716724] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:269:pipe C] reserving TC PLL 3

<7> [203.716944] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe C] enable: yes [modeset]

<7> [203.717154] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [203.717350] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: C, pipe bpp: 36, dithering: 0

<7> [203.717540] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [203.717726] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [203.717921] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [203.718097] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [203.718271] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [203.718439] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [203.718596] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [203.718601] xe 0000:03:00.0: scan mode: Underscan

<7> [203.718603] xe 0000:03:00.0: colorimetry: No Data

<7> [203.718604] xe 0000:03:00.0: picture aspect: 16:9

<7> [203.718606] xe 0000:03:00.0: active aspect: Same as Picture

<7> [203.718610] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [203.718612] xe 0000:03:00.0: quantization range: Default

<7> [203.718614] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [203.718618] xe 0000:03:00.0: ycc quantization range: Full

<7> [203.718619] xe 0000:03:00.0: hdmi content type: Graphics

<7> [203.718623] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [203.718625] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [203.718630] xe 0000:03:00.0: product: Discrete gfx

<7> [203.718632] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [203.718634] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [203.718638] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00

<7> [203.718803] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51

<7> [203.718960] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00

<7> [203.719112] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [203.719263] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [203.719409] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36

<7> [203.719543] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [203.719676] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [203.719819] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [203.719958] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [203.720087] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [203.720221] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [203.720377] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [203.720500] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pixel rate 148500, min cdclk 192000, min voltage level 0

<7> [203.720616] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [203.720731] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [203.720860] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe src: 1920x1080+0+0

<7> [203.720981] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [203.721094] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [203.721203] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [203.721308] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [203.721411] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [203.721512] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [203.721610] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [203.721709] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8

<7> [203.721833] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [203.721934] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06

<7> [203.722038] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [203.722140] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [203.722241] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [203.722343] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [203.722447] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [203.722549] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400

<7> [203.722649] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [203.722749] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [203.722861] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [203.722969] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [203.723074] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [203.723177] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [203.723279] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [203.723380] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [203.723482] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [203.723584] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [203.723683] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [203.723794] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [203.723899] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [203.723999] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [203.724100] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [203.724201] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:153:plane 1C] fb: [FB:555] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [203.724302] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [203.724402] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [203.724503] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:183:plane 2C] fb: [NOFB], visible: no

<7> [203.724602] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:213:plane 3C] fb: [NOFB], visible: no

<7> [203.724702] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:243:plane 4C] fb: [NOFB], visible: no

<7> [203.724813] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:253:plane 5C] fb: [NOFB], visible: no

<7> [203.724920] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:263:cursor C] fb: [NOFB], visible: no

<7> [203.725836] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [203.725967] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x88000000)

<7> [203.726085] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DDI TC1/PHY F]

<7> [203.726184] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST A]

<7> [203.726278] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST B]

<7> [203.726368] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST C]

<7> [203.726456] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:512:DP-MST D]

<7> [203.726546] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DDI TC2/PHY G]

<7> [203.726635] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST A]

<7> [203.726721] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST B]

<7> [203.726817] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST C]

<7> [203.726910] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:531:DP-MST D]

<7> [203.727001] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:538:DDI TC3/PHY H]

<7> [203.727089] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DDI TC4/PHY I]

<7> [203.727176] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST A]

<7> [203.727263] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST B]

<7> [203.727354] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST C]

<7> [203.727443] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:547:DP-MST D]

<7> [203.737027] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [203.737361] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A)

<7> [203.753669] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x4, on? 0) for [CRTC:269:pipe C]

<7> [203.754042] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3

<7> [203.756702] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe C

<7> [203.771821] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [203.775971] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:539:HDMI-A-3][ENCODER:538:DDI TC3/PHY H] Enable audio codec on [CRTC:269:pipe C], 36 bytes ELD

<7> [203.792534] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000)

<7> [203.793281] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N

<7> [203.794273] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:539:HDMI-A-3]

<7> [203.795048] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe C]

<6> [203.802302] [IGT] xe_pm: finished subtest d3hot-mmap-vram, SUCCESS

<7> [203.821287] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0

<6> [203.843101] Console: switching to colour frame buffer device 240x67

Results for igt@xe_pm@d3hot-mmap-vram