Results for igt@kms_force_connector_basic@force-edid

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.4-g02b0e01dd (x86_64) (Linux: 7.1.0-rc1-lgci-xe-xe-4951-bc5111f7a4ab2ac93-debug+ x86_64)
Out 
Using IGT_SRANDOM=1777482958 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.033s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.033s)
Dmesg
<6> [891.033139] Console: switching to colour dummy device 80x25
<6> [891.033344] [IGT] kms_force_connector_basic: executing
<7> [891.036341] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:517:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [891.036348] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [891.036353] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [891.040548] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [891.040580] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [891.040585] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [891.044777] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [891.044823] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [891.044827] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [891.049024] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<6> [891.049214] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [891.049511] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:517:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [891.049516] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [891.049519] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [891.049916] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [891.050011] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [891.050409] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [891.050530] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [891.050541] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [891.050642] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [891.057010] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [891.057019] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [891.057119] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] status updated from disconnected to connected
<7> [891.057163] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] probed modes:
<7> [891.057166] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [891.057169] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [891.057172] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [891.057175] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [891.057178] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [891.057193] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [891.057251] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [891.057299] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [891.057304] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [891.057708] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [891.057803] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [891.058169] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [891.058259] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [891.058265] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [891.058368] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [891.064959] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [891.064969] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [891.065118] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] probed modes:
<7> [891.065122] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [891.065125] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [891.065128] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [891.065131] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [891.065134] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [891.065334] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:517:HDMI-A-1] EDID override set
<7> [891.065352] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [891.065355] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [891.065641] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:517:HDMI-A-1] ELD monitor IGT
<7> [891.065645] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:517:HDMI-A-1] ELD size 24, SAD count 0
<7> [891.065935] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [891.066031] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [891.066452] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [891.066557] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [891.066643] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [891.066652] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [891.066658] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] probed modes:
<7> [891.066661] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [891.066664] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [891.066666] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [891.066669] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [891.066671] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [891.066770] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:517:HDMI-A-1] EDID override reset
<7> [891.066844] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [891.066847] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [891.067230] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [891.067339] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [891.067719] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [891.067816] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [891.067823] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [891.067914] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [891.074003] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [891.074009] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [891.074099] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:517:HDMI-A-1] EDID changed, epoch counter 2
<7> [891.074142] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [891.074149] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [891.074156] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] probed modes:
<7> [891.074159] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [891.074162] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [891.074165] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [891.074167] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [891.074170] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [891.074328] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:517:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [891.074332] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [891.074337] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [891.078481] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] status updated from connected to disconnected
<7> [891.078489] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [891.078512] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [891.078553] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [891.078579] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [891.078583] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [891.082740] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<6> [891.082928] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [891.089526] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [891.089531] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [891.089577] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [891.089582] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1]
<7> [891.090039] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [891.090364] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [891.090515] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [891.090613] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [891.090732] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [891.090737] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [891.090741] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [891.090744] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [891.090757] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [891.090858] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [891.090960] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [891.091321] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [891.091325] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [891.091329] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [891.091332] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [891.091336] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [891.095486] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [891.095491] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1]
<7> [891.095494] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-1]
<7> [891.095649] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1] disconnected
<7> [891.095653] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2]
<7> [891.095656] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:536:DP-2]
<7> [891.116659] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.137628] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.158593] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.179556] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.200517] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.221475] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.242443] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.263405] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.284363] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.305319] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.326282] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.347243] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.368231] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.389218] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.410206] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.431189] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.452162] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.473128] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.494091] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.515047] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.536007] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.556968] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.577926] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.598888] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.619846] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.640806] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.661763] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.682721] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.703684] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.724641] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.745600] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.766557] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.766669] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [891.766690] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2] disconnected
<7> [891.766870] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3]
<7> [891.766875] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:545:DP-3]
<7> [891.767039] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3] disconnected
<7> [891.767289] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4]
<7> [891.767293] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:554:DP-4]
<7> [891.767451] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4] disconnected
<7> [891.767456] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] enabled? yes
<7> [891.767460] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:517:HDMI-A-1] enabled? no
<7> [891.767463] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-1] enabled? no
<7> [891.767465] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:536:DP-2] enabled? no
<7> [891.767467] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:545:DP-3] enabled? no
<7> [891.767470] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:554:DP-4] enabled? no
<7> [891.767498] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [891.767512] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] found preferred mode: 3840x2160
<7> [891.767514] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
<7> [891.767530] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 3840x2160 set (0,0)
<7> [891.787384] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [891.788088] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:508:eDP-1] force updated from 0 to 0 or reprobing
<7> [891.788093] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [891.788098] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1]
<7> [891.788588] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [891.788893] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [891.789143] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [891.789386] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [891.789522] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [891.789527] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [891.789530] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [891.789534] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [891.789550] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [891.789646] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [891.789740] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [891.790089] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [891.790092] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [891.790096] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [891.790123] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [891.790126] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1]
<7> [891.790580] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [891.790984] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [891.791201] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [891.791400] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [891.791509] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [891.791513] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [891.791517] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [891.791520] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [891.791531] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [891.791632] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [891.791730] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [891.792069] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [891.792072] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [891.792075] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [891.792157] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:508:eDP-1] EDID override reset
<7> [891.792171] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [891.792175] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1]
<7> [891.792622] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [891.792914] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [891.793030] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [891.793225] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [891.793433] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [891.793437] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [891.793441] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [891.793444] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [891.793454] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [891.793550] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [891.793645] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [891.793979] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [891.793982] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [891.793985] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [891.794112] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:517:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [891.794115] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [891.794119] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [891.798291] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [891.798315] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [891.798318] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [891.802518] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [891.802598] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:517:HDMI-A-1] EDID override reset
<7> [891.802610] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [891.802613] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [891.806740] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [891.806827] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:526:DP-1] EDID override reset
<7> [891.806842] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1]
<7> [891.806844] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-1]
<7> [891.806998] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1] disconnected
<7> [891.807064] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:536:DP-2] EDID override reset
<7> [891.807076] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2]
<7> [891.807079] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:536:DP-2]
<7> [891.828091] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.849069] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.870030] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.890987] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.911942] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.932901] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.953860] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.974824] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [891.995790] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [892.016755] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [892.037714] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [892.058675] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [892.079635] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [892.100601] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [892.121560] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [892.142520] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [892.163479] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [892.184436] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [892.205392] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [892.226345] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [892.247298] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [892.268254] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [892.289210] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [892.310197] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [892.331180] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [892.352161] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [892.373135] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [892.394102] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [892.415062] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [892.436012] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [892.456965] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [892.477919] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [892.478043] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [892.478066] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2] disconnected
<7> [892.478207] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:545:DP-3] EDID override reset
<7> [892.478227] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3]
<7> [892.478231] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:545:DP-3]
<7> [892.478434] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3] disconnected
<7> [892.478553] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:554:DP-4] EDID override reset
<7> [892.478569] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4]
<7> [892.478572] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:554:DP-4]
<7> [892.478737] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4] disconnected
<7> [892.498852] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [892.499138] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [892.515607] Console: switching to colour frame buffer device 240x67
Created at 2026-04-29 17:26:36