Result:
igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0
| Detail | Value |
|---|---|
| Duration | 1.36 seconds |
| Igt-Version |
IGT-Version: 2.4-g1aba4b364 (x86_64) (Linux: 7.0.0-lgci-xe-xe-4928-95fbbe4877e154397-debug+ x86_64) |
| Out |
Using IGT_SRANDOM=1776935519 for randomisation Starting subtest: load Opened device: /dev/dri/card0 Subtest load: SUCCESS (1.359s) |
| Err |
Starting subtest: load Subtest load: SUCCESS (1.359s) |
| Dmesg |
<6> [802.833425] [IGT] xe_module_load: executing
<4> [802.833471] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030
<6> [802.848119] [IGT] xe_module_load: starting subtest load
<5> [803.193497] Setting dangerous option force_probe - tainting kernel
<6> [803.197103] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [803.198969] xe 0000:03:00.0: [drm] Running in SR-IOV PF mode
<7> [803.199005] xe 0000:03:00.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error
<6> [803.199811] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [803.199823] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE G21 e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [803.199945] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [803.200046] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [803.200156] xe 0000:03:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<6> [803.204612] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000005400000000, 0x0000000400000000
<6> [803.204717] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [803.204719] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000005400000000-56fb800000]
<6> [803.204721] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [803.204722] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000005400000000-56fb800000]
<7> [803.204857] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [803.205015] xe 0000:03:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [803.205146] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [803.205472] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [803.205583] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [803.205695] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [803.205818] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [803.205936] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [803.206046] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [803.206361] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [803.206489] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [803.206609] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [803.206725] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [803.207048] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [803.207454] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [803.221115] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [803.221240] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [803.221356] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [803.221466] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [803.221580] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [803.221689] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [803.221797] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 850)
<7> [803.221911] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [803.222012] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [803.222124] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [803.222228] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [803.222331] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [803.222438] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [803.222546] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [803.222650] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [803.222753] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [803.222860] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [803.222975] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [803.223080] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [803.223183] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [803.223291] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [803.223401] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [803.223502] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [803.223602] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [803.223700] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [803.223803] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [803.223926] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [803.224031] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [803.224132] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [803.224237] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [803.224577] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [803.224730] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [803.225076] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [803.225259] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [803.225652] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [803.225769] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [803.226092] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [803.226231] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [803.226551] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [803.226892] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [803.227011] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [803.227330] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [803.227446] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [803.227564] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [803.227675] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [803.228011] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [803.228490] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [803.229207] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [803.229630] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [803.229804] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [803.229979] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [803.230112] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 130 (130.0 usec)
<7> [803.230266] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 130 (130.0 usec)
<7> [803.230411] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [803.230568] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [803.230719] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [803.230791] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [803.230873] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [803.231008] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [803.231059] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [803.231196] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [803.231230] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [803.231375] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [803.231400] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 130 (130.0 usec)
<7> [803.231551] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [803.231565] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 130 (130.0 usec)
<7> [803.231733] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [803.231735] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [803.231907] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [803.231944] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [803.232072] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [803.232127] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [803.232241] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [803.232309] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [803.232479] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [803.232640] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [803.232800] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [803.232974] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [803.233135] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [803.233285] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [803.233453] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [803.233613] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [803.233771] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [803.233928] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [803.234085] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [803.234239] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [803.234385] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [803.234545] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [803.234682] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [803.234836] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [803.234994] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [803.235155] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [803.235305] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [803.235458] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [803.235606] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<6> [803.246408] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [803.246617] xe 0000:03:00.0: [drm:intel_crtc_init [xe]] 4 display pipes available.
<7> [803.252382] xe 0000:03:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [803.252522] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [803.252636] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [803.253007] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:507:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [803.253159] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:507:DDI TC1/PHY F]
<7> [803.253672] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:507:DDI TC1/PHY F]
<7> [803.253798] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:507:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [803.254453] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:526:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [803.254597] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:526:DDI TC2/PHY G]
<7> [803.254917] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:526:DDI TC2/PHY G]
<7> [803.255034] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:526:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [803.255445] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:538:DDI TC3/PHY H]
<7> [803.255551] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:538:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [803.255956] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:542:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [803.256094] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:542:DDI TC4/PHY I]
<7> [803.256392] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:542:DDI TC4/PHY I]
<7> [803.256496] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:542:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [803.257039] xe 0000:03:00.0: [drm:intel_vga_disable [xe]] VGA plane is disabled
<7> [803.257209] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] hw state readout: disabled
<7> [803.257564] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe B] hw state readout: disabled
<7> [803.257709] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:269:pipe C] hw state readout: disabled
<7> [803.258060] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:505:pipe D] hw state readout: disabled
<7> [803.258164] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] hw state readout: disabled, pipe A
<7> [803.258477] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] hw state readout: disabled, pipe A
<7> [803.258586] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] hw state readout: disabled, pipe A
<7> [803.258688] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] hw state readout: disabled, pipe A
<7> [803.259000] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] hw state readout: disabled, pipe A
<7> [803.259109] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] hw state readout: disabled, pipe A
<7> [803.259212] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:153:plane 1C] hw state readout: disabled, pipe C
<7> [803.259512] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:plane 2C] hw state readout: disabled, pipe C
<7> [803.259608] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:213:plane 3C] hw state readout: disabled, pipe C
<7> [803.259704] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:243:plane 4C] hw state readout: disabled, pipe C
<7> [803.260009] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:253:plane 5C] hw state readout: disabled, pipe C
<7> [803.260105] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:263:cursor C] hw state readout: disabled, pipe C
<7> [803.260201] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1B] hw state readout: disabled, pipe B
<7> [803.260499] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2B] hw state readout: disabled, pipe B
<7> [803.260592] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3B] hw state readout: disabled, pipe B
<7> [803.260689] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4B] hw state readout: disabled, pipe B
<7> [803.261004] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5B] hw state readout: disabled, pipe B
<7> [803.261103] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor B] hw state readout: disabled, pipe B
<7> [803.261203] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:389:plane 1D] hw state readout: disabled, pipe D
<7> [803.261501] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:419:plane 2D] hw state readout: disabled, pipe D
<7> [803.261606] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:449:plane 3D] hw state readout: disabled, pipe D
<7> [803.261714] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:479:plane 4D] hw state readout: disabled, pipe D
<7> [803.262025] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:489:plane 5D] hw state readout: disabled, pipe D
<7> [803.262125] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:499:cursor D] hw state readout: disabled, pipe D
<7> [803.262226] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:507:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [803.262329] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DP-MST A] hw state readout: disabled, pipe A
<7> [803.262431] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:510:DP-MST B] hw state readout: disabled, pipe B
<7> [803.262529] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:511:DP-MST C] hw state readout: disabled, pipe C
<7> [803.262624] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:512:DP-MST D] hw state readout: disabled, pipe D
<7> [803.262940] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:526:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [803.263041] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST A] hw state readout: disabled, pipe A
<7> [803.263138] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:529:DP-MST B] hw state readout: disabled, pipe B
<7> [803.263234] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:530:DP-MST C] hw state readout: disabled, pipe C
<7> [803.263329] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:531:DP-MST D] hw state readout: disabled, pipe D
<7> [803.263629] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:538:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [803.263725] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:542:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [803.263826] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DP-MST A] hw state readout: disabled, pipe A
<7> [803.263934] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:545:DP-MST B] hw state readout: disabled, pipe B
<7> [803.264032] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:546:DP-MST C] hw state readout: disabled, pipe C
<7> [803.264128] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:547:DP-MST D] hw state readout: disabled, pipe D
<7> [803.264223] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0
<7> [803.264340] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [803.264456] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1
<7> [803.264776] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [803.264886] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0
<7> [803.265221] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0
<7> [803.265326] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0
<7> [803.265442] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:508:DP-1] hw state readout: disabled
<7> [803.265771] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:521:HDMI-A-1] hw state readout: disabled
<7> [803.265883] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:527:DP-2] hw state readout: disabled
<7> [803.266215] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:535:HDMI-A-2] hw state readout: disabled
<7> [803.266525] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:539:HDMI-A-3] hw state readout: disabled
<7> [803.266629] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:543:DP-3] hw state readout: disabled
<7> [803.266733] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:551:HDMI-A-4] hw state readout: disabled
<7> [803.266840] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] min_cdclk 0 kHz
<7> [803.266952] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] min_cdclk 0 kHz
<7> [803.267053] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] min_cdclk 0 kHz
<7> [803.267160] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] min_cdclk 0 kHz
<7> [803.267259] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] min_cdclk 0 kHz
<7> [803.267362] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] min_cdclk 0 kHz
<7> [803.267469] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] min_cdclk 0 kHz
<7> [803.267570] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1B] min_cdclk 0 kHz
<7> [803.267667] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2B] min_cdclk 0 kHz
<7> [803.267771] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3B] min_cdclk 0 kHz
<7> [803.267871] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4B] min_cdclk 0 kHz
<7> [803.267978] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5B] min_cdclk 0 kHz
<7> [803.268075] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor B] min_cdclk 0 kHz
<7> [803.268171] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe B] min_cdclk 0 kHz
<7> [803.268267] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:153:plane 1C] min_cdclk 0 kHz
<7> [803.268371] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:plane 2C] min_cdclk 0 kHz
<7> [803.268477] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:213:plane 3C] min_cdclk 0 kHz
<7> [803.268585] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:243:plane 4C] min_cdclk 0 kHz
<7> [803.268690] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:253:plane 5C] min_cdclk 0 kHz
<7> [803.268789] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:263:cursor C] min_cdclk 0 kHz
<7> [803.268885] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:269:pipe C] min_cdclk 0 kHz
<7> [803.269020] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:389:plane 1D] min_cdclk 0 kHz
<7> [803.269125] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:419:plane 2D] min_cdclk 0 kHz
<7> [803.269225] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:449:plane 3D] min_cdclk 0 kHz
<7> [803.269320] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:479:plane 4D] min_cdclk 0 kHz
<7> [803.269416] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:489:plane 5D] min_cdclk 0 kHz
<7> [803.269515] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:499:cursor D] min_cdclk 0 kHz
<7> [803.269612] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:505:pipe D] min_cdclk 0 kHz
<7> [803.269921] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:151:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [803.270038] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [803.270148] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:269:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [803.270255] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:505:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [803.270357] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [803.270482] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [803.270596] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [803.270708] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [803.271053] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [803.271240] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: no [setup_hw_state]
<7> [803.271357] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe B] enable: no [setup_hw_state]
<7> [803.271468] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe C] enable: no [setup_hw_state]
<7> [803.271575] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:505:pipe D] enable: no [setup_hw_state]
<7> [803.271682] xe 0000:03:00.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling
<6> [803.276834] xe 0000:03:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.60.0
<7> [803.282014] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0065e1cf
<7> [803.282133] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [803.282225] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [803.282312] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [803.282395] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000020be
<7> [803.282478] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [803.282563] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [803.282643] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [803.282721] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [803.282799] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [803.282873] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [803.282960] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [803.283033] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [803.283106] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [803.283179] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [803.283301] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [803.293911] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [803.294757] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [803.295037] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,000fffff
<7> [803.295134] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,000fffff
<7> [803.295223] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [803.295307] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [803.295390] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [803.386302] xe 0000:03:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [803.386305] xe 0000:03:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [803.386469] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [803.386575] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6213]: allow rw access
<7> [803.386679] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62ab]: allow rw access
<7> [803.386774] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [803.386861] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb0f]: allow read access
<7> [803.386957] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [803.387085] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [803.387200] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [803.387329] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [803.387409] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [803.387492] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb0f]: allow read access
<7> [803.387578] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [803.387714] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [803.387794] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [803.387878] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb0f]: allow read access
<7> [803.387969] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [803.389346] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [803.389441] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [803.389538] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [803.389628] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x11111440
<7> [803.389715] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [803.389799] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [803.389884] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [803.389981] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00000100
<7> [803.390065] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [803.390152] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [803.390233] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [803.390313] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [803.390391] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [803.390467] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [803.390543] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [803.390622] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [803.390700] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [803.390774] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [803.390847] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [803.390928] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [803.391022] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [803.391096] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [803.391174] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [803.391251] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [803.391326] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [803.391400] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [803.391478] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [803.391568] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [803.391654] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [803.391735] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [803.391813] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210
<7> [803.391889] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8
<7> [803.391987] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc
<7> [803.392069] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01
<7> [803.392147] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c
<7> [803.392228] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [803.392313] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [803.392391] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [803.392468] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [803.392545] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [803.392627] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [803.392712] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [803.392795] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009100
<7> [803.392874] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [803.393189] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [803.393267] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [803.393342] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [803.393416] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [803.393731] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [803.393817] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [803.393902] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [803.393982] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [803.394443] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [803.394531] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [803.394615] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [803.394694] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [803.394773] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [803.394850] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [803.394956] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [803.395279] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [803.395357] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [803.395435] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [803.395511] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [803.395588] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [803.395663] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [803.395739] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [803.396537] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [803.401921] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0196b1cf
<7> [803.402044] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [803.402127] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [803.402203] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [803.402277] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000c00
<7> [803.402350] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [803.402421] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [803.402496] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [803.402571] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [803.402643] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [803.402713] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [803.402783] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [803.402851] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [803.402926] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [803.403029] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [803.403211] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [803.405355] xe 0000:03:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0xe8c000 for xe_guc_buf_cache_init_with_size [xe]
<7> [803.407686] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [803.408734] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [803.430397] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 49152)
<7> [803.441210] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [803.441523] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [803.442835] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4146 dwords
<7> [803.442980] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [803.443069] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040
<7> [803.443146] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [803.443221] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [803.443297] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [803.443370] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [803.443445] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [803.443529] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [803.443620] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000 (MCR)
<7> [803.447349] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [803.447471] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [803.447561] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [803.450784] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [803.450882] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [803.455095] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [803.455944] xe 0000:03:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.60.0
<7> [803.459729] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x0236c1cf
<7> [803.459845] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [803.459947] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [803.460032] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [803.460114] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00005ada
<7> [803.460193] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [803.460272] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [803.460347] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [803.460425] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [803.460505] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [803.460584] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [803.460660] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [803.460735] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [803.460809] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [803.462020] xe 0000:03:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [803.462460] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [803.462591] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [803.473928] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [803.474276] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [803.474390] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000,00000000
<7> [803.474486] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000,00000000
<7> [803.474580] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [803.474666] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [803.474748] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [803.474834] xe 0000:03:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [803.474835] xe 0000:03:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [803.474837] xe 0000:03:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [803.474838] xe 0000:03:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [803.474839] xe 0000:03:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [803.474840] xe 0000:03:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [803.474841] xe 0000:03:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [803.474842] xe 0000:03:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [803.474846] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [803.475064] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [803.475177] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [803.475293] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931af]: allow read access
<7> [803.475400] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d3]: allow rw access
<7> [803.475504] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [803.475608] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941af]: allow read access
<7> [803.475707] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d3]: allow rw access
<7> [803.475803] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [803.475906] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949af]: allow read access
<7> [803.476006] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d3]: allow rw access
<7> [803.476204] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [803.476294] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [803.476386] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931af]: allow read access
<7> [803.476482] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d3]: allow rw access
<7> [803.476582] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [803.476675] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941af]: allow read access
<7> [803.476769] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d3]: allow rw access
<7> [803.476858] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [803.476954] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949af]: allow read access
<7> [803.477042] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d3]: allow rw access
<7> [803.477222] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [803.477308] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [803.477398] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931af]: allow read access
<7> [803.477485] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d3]: allow rw access
<7> [803.477574] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [803.477659] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941af]: allow read access
<7> [803.477746] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d3]: allow rw access
<7> [803.477837] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [803.477929] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949af]: allow read access
<7> [803.478016] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d3]: allow rw access
<7> [803.478198] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [803.478283] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [803.478372] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931af]: allow read access
<7> [803.478466] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d3]: allow rw access
<7> [803.478565] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [803.478660] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941af]: allow read access
<7> [803.478760] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d3]: allow rw access
<7> [803.478858] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [803.478958] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949af]: allow read access
<7> [803.479049] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d3]: allow rw access
<7> [803.480608] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [803.480712] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [803.480813] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xc50c] = 0x00010002
<7> [803.480914] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [803.481002] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [803.481092] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [803.481177] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [803.481275] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [803.481373] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [803.481465] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [803.481551] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [803.481636] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [803.481725] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [803.481812] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [803.481897] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [803.481992] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [803.482073] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [803.482154] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [803.482234] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [803.482319] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [803.482401] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [803.482481] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [803.482559] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [803.482636] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [803.482714] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [803.482800] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [803.482904] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [803.482998] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [803.483090] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c
<7> [803.483180] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1
<7> [803.483269] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0
<7> [803.483355] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c
<7> [803.483439] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1
<7> [803.483525] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0
<7> [803.483609] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c
<7> [803.483694] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1
<7> [803.483779] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0
<7> [803.483986] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [803.484083] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [803.484178] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [803.484268] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d0] = 0x1039319c
<7> [803.484354] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d4] = 0x103931a1
<7> [803.484437] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d8] = 0x003931d0
<7> [803.484520] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04dc] = 0x1039419c
<7> [803.484603] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e0] = 0x103941a1
<7> [803.484691] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e4] = 0x003941d0
<7> [803.484777] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e8] = 0x1039499c
<7> [803.484860] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04ec] = 0x103949a1
<7> [803.484951] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04f0] = 0x003949d0
<7> [803.485135] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [803.485228] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [803.485323] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [803.485412] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c
<7> [803.485497] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1
<7> [803.485582] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0
<7> [803.485666] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c
<7> [803.485750] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1
<7> [803.485833] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0
<7> [803.485930] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c
<7> [803.486018] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1
<7> [803.486103] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0
<7> [803.486303] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [803.486401] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [803.486494] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [803.486583] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d0] = 0x1039319c
<7> [803.486669] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d4] = 0x103931a1
<7> [803.486753] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d8] = 0x003931d0
<7> [803.486836] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84dc] = 0x1039419c
<7> [803.486924] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e0] = 0x103941a1
<7> [803.487010] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e4] = 0x003941d0
<7> [803.487102] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e8] = 0x1039499c
<7> [803.487192] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84ec] = 0x103949a1
<7> [803.487278] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84f0] = 0x003949d0
<7> [803.487704] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [803.491667] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x036501cf
<7> [803.491765] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [803.491852] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [803.491944] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [803.492028] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000046d8
<7> [803.492113] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [803.492192] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [803.492269] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [803.492346] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [803.492421] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [803.492494] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [803.492567] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [803.492642] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [803.492715] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [803.492813] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [803.492926] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [803.494069] xe 0000:03:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x2bf1000 for xe_guc_buf_cache_init_with_size [xe]
<7> [803.513875] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 49152)
<7> [803.524721] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 10ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [803.525085] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [803.525696] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [803.525805] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [803.527360] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [803.527469] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [803.539922] xe 0000:03:00.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC
<7> [803.540408] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [803.540598] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [803.540770] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [803.540945] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [803.542581] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [803.542725] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [803.543232] xe 0000:03:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [803.543304] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [803.543444] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [803.543556] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [803.543665] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [803.544509] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 0: start 0x90008
<7> [803.544646] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 1: start 0x90108
<7> [803.544763] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 2: start 0x90208
<7> [803.544869] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 3: start 0x90308
<7> [803.544997] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 4: start 0x903c8
<7> [803.545114] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 0: start 0x98008
<7> [803.545218] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 1: start 0x98108
<7> [803.545320] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 2: start 0x98208
<7> [803.545423] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 3: start 0x98308
<7> [803.545529] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 4: start 0x983c8
<7> [803.545632] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 0: start 0x52008
<7> [803.545732] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 1: start 0x52108
<7> [803.545829] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 2: start 0x52208
<7> [803.545938] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 3: start 0x52308
<7> [803.546054] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 4: start 0x523c8
<7> [803.546159] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 0: start 0x59008
<7> [803.546265] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 1: start 0x59108
<7> [803.546375] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 2: start 0x59208
<7> [803.546479] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 3: start 0x59308
<7> [803.546580] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 4: start 0x593c8
<7> [803.546892] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no
<7> [803.547107] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [803.547281] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [803.547436] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [803.547589] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: no [fastset]
<7> [803.547711] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe B] enable: no [fastset]
<7> [803.547833] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe C] enable: no [fastset]
<7> [803.547970] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:505:pipe D] enable: no [fastset]
<7> [803.548758] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff30f2 0x28d32a71)
<7> [803.548956] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [803.549321] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<7> [803.549504] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe B]
<7> [803.549763] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe C]
<7> [803.549975] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:505:pipe D]
<7> [803.550133] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03010 0x28d00071)
<7> [803.550215] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [803.550608] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<5> [803.552178] Creating 4 MTD partitions on "xe.nvm.768":
<5> [803.552191] 0x000000000000-0x000000001000 : "xe.nvm.768.DESCRIPTOR"
<7> [803.553372] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:508:DP-1] adding connector to sysfs
<7> [803.554576] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1
<7> [803.555950] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:508:DP-1] generating connector hotplug event
<5> [803.556192] 0x000000001000-0x00000054e000 : "xe.nvm.768.GSC"
<7> [803.556291] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:521:HDMI-A-1] adding connector to sysfs
<7> [803.556622] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:521:HDMI-A-1] generating connector hotplug event
<7> [803.556661] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:527:DP-2] adding connector to sysfs
<7> [803.557310] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2
<7> [803.558491] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:527:DP-2] generating connector hotplug event
<7> [803.558540] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:535:HDMI-A-2] adding connector to sysfs
<7> [803.559054] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:535:HDMI-A-2] generating connector hotplug event
<7> [803.559142] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:539:HDMI-A-3] adding connector to sysfs
<7> [803.559773] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:539:HDMI-A-3] generating connector hotplug event
<7> [803.559853] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:543:DP-3] adding connector to sysfs
<7> [803.560821] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3
<7> [803.563425] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:543:DP-3] generating connector hotplug event
<7> [803.563571] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:551:HDMI-A-4] adding connector to sysfs
<7> [803.564698] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:551:HDMI-A-4] generating connector hotplug event
<5> [803.565990] 0x00000054e000-0x00000074e000 : "xe.nvm.768.OptionROM"
<7> [803.568104] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [803.568935] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<6> [803.573661] mei_lb xe.mei-gscfi.768-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:03:00.0 (ops xe_late_bind_component_ops [xe])
<5> [803.573873] 0x00000074e000-0x00000075e000 : "xe.nvm.768.DAM"
<7> [803.574134] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [803.574503] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<6> [803.574955] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0
<7> [803.575079] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [803.575526] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<7> [803.579770] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:151:pipe A] not active, skipping
<7> [803.580153] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe B] not active, skipping
<7> [803.580454] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:269:pipe C] not active, skipping
<7> [803.580736] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:505:pipe D] not active, skipping
<7> [803.581238] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]
<7> [803.582958] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [803.584267] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [803.584343] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [803.585062] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [803.585931] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:508:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [803.586245] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]
<7> [803.590577] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:521:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [803.590832] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]
<7> [803.595160] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:527:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [803.595534] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]
<7> [803.599908] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:535:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [803.600187] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]
<7> [803.604522] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:539:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [803.604787] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [803.609168] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:543:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [803.609347] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]
<7> [803.613525] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:551:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [803.613637] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [803.613762] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-1]
<7> [803.613774] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]
<7> [803.618208] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-1] disconnected
<7> [803.618249] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:HDMI-A-1]
<7> [803.618253] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]
<7> [803.622473] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:HDMI-A-1] disconnected
<7> [803.622481] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:DP-2]
<7> [803.622485] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]
<7> [803.626721] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:DP-2] disconnected
<7> [803.626727] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:HDMI-A-2]
<7> [803.626730] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]
<7> [803.631257] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:HDMI-A-2] disconnected
<7> [803.631262] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:HDMI-A-3]
<7> [803.631265] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]
<7> [803.635495] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:HDMI-A-3] disconnected
<7> [803.635500] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [803.635504] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [803.639875] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [803.639881] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-4]
<7> [803.639884] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]
<7> [803.644247] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-4] disconnected
<7> [803.644252] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [803.644260] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:DP-1] enabled? no
<7> [803.644262] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:521:HDMI-A-1] enabled? no
<7> [803.644265] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:DP-2] enabled? no
<7> [803.644268] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:535:HDMI-A-2] enabled? no
<7> [803.644270] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:539:HDMI-A-3] enabled? no
<7> [803.644273] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no
<7> [803.644275] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:551:HDMI-A-4] enabled? no
<7> [803.644395] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [803.644411] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [803.644468] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [803.644479] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<6> [803.644580] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [803.645798] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [803.646029] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [803.645999] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7> [803.646007] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [803.646201] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [803.646393] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-1]
<7> [803.646360] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [803.646402] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-1]
<7> [803.646538] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [803.646889] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [803.647061] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [803.647450] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [803.647626] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [803.647780] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [803.648172] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [803.648523] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [803.648644] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [803.649000] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [803.649137] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [803.649253] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [803.649370] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [803.649474] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [803.649577] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [803.649680] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [803.649784] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [803.649895] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [803.650040] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [803.650744] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-1] disconnected
<7> [803.650752] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:HDMI-A-1]
<7> [803.650756] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-1]
<3> [803.651070] snd_hda_intel 0000:04:00.0: Unknown capability 0
<7> [803.651919] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [803.652138] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [803.652371] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x02000000)
<7> [803.652624] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [803.652835] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x0a000000)
<7> [803.653258] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [803.653459] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x2a000000)
<7> [803.653677] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [803.653874] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0xaa000000)
<7> [803.654910] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:HDMI-A-1] disconnected
<7> [803.654918] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:DP-2]
<7> [803.654922] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-2]
<7> [803.656800] azx_first_init: snd_hda_intel 0000:04:00.0: chipset global capabilities = 0x4101
<7> [803.657008] azx_init_pci: snd_hda_intel 0000:04:00.0: Clearing TCSEL
<7> [803.657017] azx_init_pci: snd_hda_intel 0000:04:00.0: SCH snoop: Enabled
<7> [803.659156] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:DP-2] disconnected
<7> [803.659161] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:HDMI-A-2]
<7> [803.659165] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-2]
<7> [803.663337] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:HDMI-A-2] disconnected
<7> [803.663343] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:HDMI-A-3]
<7> [803.663347] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-3]
<7> [803.667496] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:HDMI-A-3] disconnected
<7> [803.667502] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [803.667506] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<6> [803.667914] xe 0000:03:00.0: [drm] Using mailbox commands for power limits
<7> [803.668385] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] thermal info read val 0x3c78647d val1 0x69
<7> [803.668563] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] thermal config count 0x9
<7> [803.668674] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [803.669087] xe 0000:03:00.0: [drm] PL2 is supported on channel 0
<7> [803.669123] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [803.669353] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [803.669480] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [803.671778] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [803.671783] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-4]
<7> [803.671787] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-4]
<7> [803.674218] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [803.676265] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-4] disconnected
<7> [803.676274] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [803.676286] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:DP-1] enabled? no
<7> [803.676292] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:521:HDMI-A-1] enabled? no
<7> [803.676297] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:DP-2] enabled? no
<7> [803.676302] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:535:HDMI-A-2] enabled? no
<7> [803.676308] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:539:HDMI-A-3] enabled? no
<7> [803.676313] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no
<7> [803.676317] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:551:HDMI-A-4] enabled? no
<7> [803.676482] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [803.676503] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [803.676572] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [803.676585] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [803.676617] xe 0000:03:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [803.680579] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [803.681137] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<6> [803.682424] xe 0000:0a:00.0: [drm] Running in SR-IOV PF mode
<7> [803.682472] xe 0000:0a:00.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error
<6> [803.683447] xe 0000:0a:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [803.683457] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE G21 e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [803.683587] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [803.683655] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [803.683697] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [803.683807] xe 0000:0a:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<6> [803.687273] xe 0000:0a:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000
<6> [803.687414] xe 0000:0a:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [803.687416] xe 0000:0a:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<6> [803.687418] xe 0000:0a:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [803.687420] xe 0000:0a:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<7> [803.687553] xe 0000:0a:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [803.687699] xe 0000:0a:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [803.687828] xe 0000:0a:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [803.688168] xe 0000:0a:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [803.688284] xe 0000:0a:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [803.688481] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [803.688601] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [803.688712] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [803.688820] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [803.689133] xe 0000:0a:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [803.689269] xe 0000:0a:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [803.689387] xe 0000:0a:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [803.689503] xe 0000:0a:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [803.689809] xe 0000:0a:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [803.690541] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [803.701451] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware successful
<7> [803.707032] xe 0000:0a:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [803.707190] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [803.707328] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [803.707463] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [803.707586] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [803.707697] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [803.707805] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 850)
<7> [803.707928] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [803.708042] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [803.708157] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [803.708263] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [803.708366] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [803.708470] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [803.708583] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [803.708694] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [803.708799] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [803.708915] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [803.709034] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [803.709144] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [803.709249] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [803.709357] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [803.709465] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [803.709567] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [803.709671] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [803.709770] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [803.709870] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [803.709981] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [803.710101] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [803.710209] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [803.710318] xe 0000:0a:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [803.710651] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [803.710801] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [803.711154] xe 0000:0a:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [803.713628] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [803.713851] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [803.714061] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [803.714259] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [803.714455] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [803.714649] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [803.714841] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [803.715039] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [803.715230] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [803.715420] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [803.715610] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [803.715799] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [803.715997] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [803.716186] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [803.716373] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [803.716559] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [803.716745] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [803.716940] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [803.717127] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [803.717314] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [803.717502] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [803.717689] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [803.717875] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [803.718232] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [803.718374] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [803.718489] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [803.718595] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [803.718700] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [803.718801] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [803.718909] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [803.719017] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [803.719119] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [803.719218] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [803.719315] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [803.719413] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [803.719512] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [803.720043] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [803.723178] xe 0000:0a:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [803.723445] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [803.723566] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [803.723875] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [803.724047] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6> [803.724267] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input4
<7> [803.724362] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [803.724486] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [803.724589] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [803.724912] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [803.725149] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<6> [803.725725] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input5
<7> [803.725618] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [803.725925] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [803.726504] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000)
<6> [803.727765] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input6
<7> [803.728334] xe 0000:0a:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<6> [803.729532] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input7
<7> [803.729700] xe 0000:0a:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [803.731283] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [803.731807] xe 0000:0a:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [803.731839] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [803.732400] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [803.732439] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [803.732732] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [803.732799] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [803.733076] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 130 (130.0 usec)
<7> [803.733173] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [803.733392] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 130 (130.0 usec)
<7> [803.733518] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [803.733716] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [803.733895] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [803.734070] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [803.734304] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [803.734408] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [803.734644] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [803.734715] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [803.734980] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [803.735033] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [803.735315] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [803.735343] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [803.735655] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 130 (130.0 usec)
<7> [803.735658] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [803.735969] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 130 (130.0 usec)
<7> [803.735989] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [803.736282] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [803.736333] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [803.736590] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [803.736672] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [803.736888] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [803.737004] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [803.737208] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [803.737332] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [803.737633] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [803.737894] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [803.738193] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [803.738455] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [803.738708] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [803.738971] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [803.739219] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [803.739417] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [803.739598] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [803.739792] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [803.739986] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [803.740180] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [803.740365] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<6> [803.750764] xe 0000:0a:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [803.752172] xe 0000:0a:00.0: [drm:intel_crtc_init [xe]] 4 display pipes available.
<7> [803.760331] xe 0000:0a:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [803.760479] xe 0000:0a:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [803.760595] xe 0000:0a:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [803.760933] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:507:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [803.761087] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:507:DDI TC1/PHY F]
<7> [803.761536] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:507:DDI TC1/PHY F]
<7> [803.761662] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:507:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [803.762223] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:526:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [803.762371] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:526:DDI TC2/PHY G]
<7> [803.762688] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:526:DDI TC2/PHY G]
<7> [803.762796] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:526:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [803.763218] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:538:DDI TC3/PHY H]
<7> [803.763328] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:538:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [803.763713] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:542:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [803.763855] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:542:DDI TC4/PHY I]
<7> [803.764272] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:542:DDI TC4/PHY I]
<7> [803.764388] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:542:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [803.764843] xe 0000:0a:00.0: [drm:intel_vga_disable [xe]] VGA plane is disabled
<7> [803.765392] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] hw state readout: disabled
<7> [803.765570] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe B] hw state readout: disabled
<7> [803.765938] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:269:pipe C] hw state readout: disabled
<7> [803.766100] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:505:pipe D] hw state readout: disabled
<7> [803.766403] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] hw state readout: disabled, pipe A
<7> [803.766514] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] hw state readout: disabled, pipe A
<7> [803.766629] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] hw state readout: disabled, pipe A
<7> [803.766940] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] hw state readout: disabled, pipe A
<7> [803.767049] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] hw state readout: disabled, pipe A
<7> [803.767154] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] hw state readout: disabled, pipe A
<7> [803.767452] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:153:plane 1C] hw state readout: disabled, pipe C
<7> [803.767566] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:plane 2C] hw state readout: disabled, pipe C
<7> [803.767677] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:213:plane 3C] hw state readout: disabled, pipe C
<7> [803.767978] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:243:plane 4C] hw state readout: disabled, pipe C
<7> [803.768088] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:253:plane 5C] hw state readout: disabled, pipe C
<7> [803.768189] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:263:cursor C] hw state readout: disabled, pipe C
<7> [803.768482] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1B] hw state readout: disabled, pipe B
<7> [803.768587] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2B] hw state readout: disabled, pipe B
<7> [803.768687] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3B] hw state readout: disabled, pipe B
<7> [803.768981] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4B] hw state readout: disabled, pipe B
<7> [803.769095] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5B] hw state readout: disabled, pipe B
<7> [803.769415] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor B] hw state readout: disabled, pipe B
<7> [803.769712] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:389:plane 1D] hw state readout: disabled, pipe D
<7> [803.769818] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:419:plane 2D] hw state readout: disabled, pipe D
<7> [803.769940] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:449:plane 3D] hw state readout: disabled, pipe D
<7> [803.770246] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:479:plane 4D] hw state readout: disabled, pipe D
<7> [803.770356] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:489:plane 5D] hw state readout: disabled, pipe D
<7> [803.770460] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:499:cursor D] hw state readout: disabled, pipe D
<7> [803.770765] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:507:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [803.770867] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DP-MST A] hw state readout: disabled, pipe A
<7> [803.771017] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:510:DP-MST B] hw state readout: disabled, pipe B
<7> [803.771125] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:511:DP-MST C] hw state readout: disabled, pipe C
<7> [803.771226] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:512:DP-MST D] hw state readout: disabled, pipe D
<7> [803.771524] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:526:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [803.771619] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST A] hw state readout: disabled, pipe A
<7> [803.771712] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:529:DP-MST B] hw state readout: disabled, pipe B
<7> [803.771807] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:530:DP-MST C] hw state readout: disabled, pipe C
<7> [803.771912] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:531:DP-MST D] hw state readout: disabled, pipe D
<7> [803.772242] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:538:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [803.772352] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:542:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [803.772450] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DP-MST A] hw state readout: disabled, pipe A
<7> [803.772545] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:545:DP-MST B] hw state readout: disabled, pipe B
<7> [803.772646] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:546:DP-MST C] hw state readout: disabled, pipe C
<7> [803.772752] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:547:DP-MST D] hw state readout: disabled, pipe D
<7> [803.772858] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0
<7> [803.772990] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [803.773105] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1
<7> [803.773419] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [803.773542] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0
<7> [803.773863] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0
<7> [803.774175] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0
<7> [803.774288] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:508:DP-4] hw state readout: disabled
<7> [803.774492] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:521:HDMI-A-5] hw state readout: disabled
<7> [803.774806] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:527:DP-5] hw state readout: disabled
<7> [803.774928] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:535:HDMI-A-6] hw state readout: disabled
<7> [803.775248] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:539:HDMI-A-7] hw state readout: disabled
<7> [803.775556] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:543:DP-6] hw state readout: disabled
<7> [803.775669] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:551:HDMI-A-8] hw state readout: disabled
<7> [803.775769] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] min_cdclk 0 kHz
<7> [803.775865] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] min_cdclk 0 kHz
<7> [803.775971] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] min_cdclk 0 kHz
<7> [803.776066] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] min_cdclk 0 kHz
<7> [803.776163] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] min_cdclk 0 kHz
<7> [803.776258] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] min_cdclk 0 kHz
<7> [803.776352] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] min_cdclk 0 kHz
<7> [803.776447] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1B] min_cdclk 0 kHz
<7> [803.776541] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2B] min_cdclk 0 kHz
<7> [803.776636] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3B] min_cdclk 0 kHz
<7> [803.776737] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4B] min_cdclk 0 kHz
<7> [803.776837] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5B] min_cdclk 0 kHz
<7> [803.776945] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor B] min_cdclk 0 kHz
<7> [803.777043] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe B] min_cdclk 0 kHz
<7> [803.777138] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:153:plane 1C] min_cdclk 0 kHz
<7> [803.777233] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:plane 2C] min_cdclk 0 kHz
<7> [803.777334] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:213:plane 3C] min_cdclk 0 kHz
<7> [803.777437] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:243:plane 4C] min_cdclk 0 kHz
<7> [803.777538] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:253:plane 5C] min_cdclk 0 kHz
<7> [803.777637] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:263:cursor C] min_cdclk 0 kHz
<7> [803.777734] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:269:pipe C] min_cdclk 0 kHz
<7> [803.777829] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:389:plane 1D] min_cdclk 0 kHz
<7> [803.777934] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:419:plane 2D] min_cdclk 0 kHz
<7> [803.778029] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:449:plane 3D] min_cdclk 0 kHz
<7> [803.778125] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:479:plane 4D] min_cdclk 0 kHz
<7> [803.778221] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:489:plane 5D] min_cdclk 0 kHz
<7> [803.778323] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:499:cursor D] min_cdclk 0 kHz
<7> [803.778423] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:505:pipe D] min_cdclk 0 kHz
<7> [803.778716] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:151:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [803.778823] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [803.778940] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:269:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [803.779038] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:505:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [803.779136] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [803.779264] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [803.779378] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [803.779485] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [803.779803] xe 0000:0a:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [803.779964] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: no [setup_hw_state]
<7> [803.780085] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe B] enable: no [setup_hw_state]
<7> [803.780197] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe C] enable: no [setup_hw_state]
<7> [803.780303] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:505:pipe D] enable: no [setup_hw_state]
<7> [803.780407] xe 0000:0a:00.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling
<6> [803.783691] xe 0000:0a:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.60.0
<7> [803.789231] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0065e1cf
<7> [803.789350] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [803.789452] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [803.789538] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [803.789622] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000020be
<7> [803.789702] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [803.789779] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [803.789854] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [803.789944] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [803.790019] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [803.790093] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [803.790167] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [803.790242] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [803.790318] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [803.790396] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [803.790526] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [803.801918] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [803.802732] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [803.802856] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,000fffff
<7> [803.802952] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,000fffff
<7> [803.803081] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [803.803179] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [803.803265] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [803.895474] xe 0000:0a:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [803.895478] xe 0000:0a:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [803.895613] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [803.895738] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6213]: allow rw access
<7> [803.895854] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62ab]: allow rw access
<7> [803.895982] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [803.896110] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb0f]: allow read access
<7> [803.896206] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [803.896344] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [803.896471] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [803.896621] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [803.896719] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [803.896816] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb0f]: allow read access
<7> [803.896917] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [803.897072] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [803.897162] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [803.897257] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb0f]: allow read access
<7> [803.897346] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [803.899089] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [803.899206] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [803.899320] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [803.899428] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x11111440
<7> [803.899531] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [803.899632] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [803.899732] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [803.899834] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00000100
<7> [803.899941] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [803.900035] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [803.900126] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [803.900221] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [803.900315] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [803.900412] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [803.900505] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [803.900594] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [803.900681] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [803.900769] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [803.900860] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [803.900969] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [803.901065] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [803.901156] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [803.901245] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [803.901332] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [803.901418] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [803.901511] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [803.901603] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [803.901702] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [803.901795] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [803.901884] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [803.902027] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210
<7> [803.902133] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8
<7> [803.902228] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc
<7> [803.902313] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01
<7> [803.902399] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c
<7> [803.902489] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [803.902584] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [803.902677] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [803.902771] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [803.902864] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [803.902980] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [803.903080] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [803.903178] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009100
<7> [803.903274] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [803.903651] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [803.903749] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [803.903841] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [803.903942] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [803.904309] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [803.904405] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [803.904496] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [803.904584] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [803.904973] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [803.905114] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [803.905245] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [803.905354] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [803.905443] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [803.905528] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [803.905611] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [803.905996] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [803.906090] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [803.906180] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [803.906265] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [803.906350] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [803.906433] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [803.906513] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [803.907113] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [803.913801] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0196b1cf
<7> [803.913911] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [803.913998] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [803.914082] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [803.914166] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000c00
<7> [803.914250] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [803.914330] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [803.914410] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [803.914486] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [803.914563] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [803.914639] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [803.914713] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [803.914788] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [803.914862] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [803.914974] xe 0000:0a:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [803.915092] xe 0000:0a:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [803.917241] xe 0000:0a:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0xe8c000 for xe_guc_buf_cache_init_with_size [xe]
<7> [803.919088] xe 0000:0a:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [803.920863] xe 0000:0a:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [803.921180] xe 0000:03:00.0: [drm:xe_hwmon_read [xe]] thermal data for group 0 val 0x1f1f1c1d
<7> [803.921617] xe 0000:03:00.0: [drm:xe_hwmon_read [xe]] thermal data for group 1 val 0x21222021
<7> [803.943899] xe 0000:0a:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 49152)
<7> [803.953967] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [803.954314] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [803.955423] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4146 dwords
<7> [803.955526] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [803.955612] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040
<7> [803.955693] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [803.955772] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [803.955850] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [803.955944] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [803.956026] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [803.956109] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [803.956194] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000 (MCR)
<7> [803.959161] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [803.959265] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [803.959357] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [803.962429] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [803.962549] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [803.966327] xe 0000:0a:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [803.967206] xe 0000:0a:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.60.0
<7> [803.970873] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x0236c1cf
<7> [803.971006] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [803.971097] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [803.971180] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [803.971260] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00005ada
<7> [803.971337] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [803.971414] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [803.971490] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [803.971564] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [803.971638] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [803.971712] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [803.971785] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [803.971859] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [803.971946] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [803.972573] xe 0000:0a:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [803.973032] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [803.973170] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [803.983919] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [803.984277] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [803.984391] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000,00000000
<7> [803.984480] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000,00000000
<7> [803.984563] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [803.984643] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [803.984722] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [803.984808] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [803.984810] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [803.984811] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [803.984812] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [803.984813] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [803.984814] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [803.984815] xe 0000:0a:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [803.984817] xe 0000:0a:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [803.984831] xe 0000:0a:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [803.985048] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [803.985158] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [803.985275] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931af]: allow read access
<7> [803.985378] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d3]: allow rw access
<7> [803.985475] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [803.985566] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941af]: allow read access
<7> [803.985655] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d3]: allow rw access
<7> [803.985747] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [803.985836] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949af]: allow read access
<7> [803.985945] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d3]: allow rw access
<7> [803.986136] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [803.986224] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [803.986316] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931af]: allow read access
<7> [803.986406] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d3]: allow rw access
<7> [803.986496] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [803.986584] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941af]: allow read access
<7> [803.986671] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d3]: allow rw access
<7> [803.986767] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [803.986862] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949af]: allow read access
<7> [803.986984] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d3]: allow rw access
<7> [803.987174] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [803.987262] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [803.987354] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931af]: allow read access
<7> [803.987445] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d3]: allow rw access
<7> [803.987542] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [803.987638] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941af]: allow read access
<7> [803.987732] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d3]: allow rw access
<7> [803.987823] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [803.987921] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949af]: allow read access
<7> [803.988020] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d3]: allow rw access
<7> [803.988216] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [803.988307] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [803.988404] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931af]: allow read access
<7> [803.988498] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d3]: allow rw access
<7> [803.988592] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [803.988680] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941af]: allow read access
<7> [803.988768] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d3]: allow rw access
<7> [803.988855] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [803.988954] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949af]: allow read access
<7> [803.989040] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d3]: allow rw access
<7> [803.990323] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [803.990442] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [803.990556] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xc50c] = 0x00010002
<7> [803.990659] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [803.990762] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [803.990862] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [803.990970] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [803.991064] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [803.991160] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [803.991251] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [803.991337] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [803.991420] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [803.991500] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [803.991580] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [803.991660] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [803.991742] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [803.991821] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [803.991898] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [803.992001] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [803.992090] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [803.992175] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [803.992256] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [803.992337] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [803.992423] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [803.992507] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [803.992588] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [803.992685] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [803.992778] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [803.992870] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c
<7> [803.992969] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1
<7> [803.993056] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0
<7> [803.993144] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c
<7> [803.993229] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1
<7> [803.993319] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0
<7> [803.993408] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c
<7> [803.993492] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1
<7> [803.993574] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0
<7> [803.993797] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [803.993891] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [803.994013] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [803.994103] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d0] = 0x1039319c
<7> [803.994188] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d4] = 0x103931a1
<7> [803.994273] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d8] = 0x003931d0
<7> [803.994361] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04dc] = 0x1039419c
<7> [803.994447] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e0] = 0x103941a1
<7> [803.994534] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e4] = 0x003941d0
<7> [803.994618] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e8] = 0x1039499c
<7> [803.994701] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04ec] = 0x103949a1
<7> [803.994783] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04f0] = 0x003949d0
<7> [803.994999] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [803.995085] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [803.995170] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [803.995254] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c
<7> [803.995335] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1
<7> [803.995423] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0
<7> [803.995508] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c
<7> [803.995591] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1
<7> [803.995674] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0
<7> [803.995762] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c
<7> [803.995847] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1
<7> [803.995942] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0
<7> [803.996153] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [803.996240] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [803.996327] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [803.996411] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d0] = 0x1039319c
<7> [803.996493] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d4] = 0x103931a1
<7> [803.996575] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d8] = 0x003931d0
<7> [803.996656] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84dc] = 0x1039419c
<7> [803.996737] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e0] = 0x103941a1
<7> [803.996817] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e4] = 0x003941d0
<7> [803.996897] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e8] = 0x1039499c
<7> [803.997003] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84ec] = 0x103949a1
<7> [803.997092] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84f0] = 0x003949d0
<7> [803.997535] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [804.003180] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x036501cf
<7> [804.003282] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [804.003373] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [804.003457] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [804.003537] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000046d8
<7> [804.003617] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [804.003695] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [804.003772] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [804.003848] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [804.003932] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [804.004006] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [804.004081] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [804.004154] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [804.004229] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [804.004329] xe 0000:0a:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [804.004436] xe 0000:0a:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [804.005638] xe 0000:0a:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x2bf1000 for xe_guc_buf_cache_init_with_size [xe]
<7> [804.027266] xe 0000:0a:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 49152)
<7> [804.038144] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 10ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [804.038572] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [804.039261] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [804.039369] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [804.041633] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [804.041729] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [804.052913] xe 0000:0a:00.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC
<7> [804.053354] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [804.053540] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [804.053707] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [804.053862] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<5> [804.061528] Creating 4 MTD partitions on "xe.nvm.2560":
<5> [804.061543] 0x000000000000-0x000000001000 : "xe.nvm.2560.DESCRIPTOR"
<5> [804.069960] 0x000000001000-0x00000054e000 : "xe.nvm.2560.GSC"
<5> [804.076549] 0x00000054e000-0x00000074e000 : "xe.nvm.2560.OptionROM"
<5> [804.083924] 0x00000074e000-0x00000075e000 : "xe.nvm.2560.DAM"
<7> [804.089461] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [804.092049] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [804.092070] xe 0000:0a:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [804.092200] xe 0000:0a:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [804.092435] xe 0000:0a:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [804.092493] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [804.092602] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [804.092693] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [804.092782] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [804.093024] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 0: start 0x90008
<7> [804.093153] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 1: start 0x90108
<7> [804.093266] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 2: start 0x90208
<7> [804.093398] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 3: start 0x90308
<7> [804.093526] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 4: start 0x903c8
<7> [804.093656] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 0: start 0x98008
<7> [804.093785] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 1: start 0x98108
<7> [804.093926] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 2: start 0x98208
<7> [804.094066] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 3: start 0x98308
<7> [804.094214] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe B] FQ 4: start 0x983c8
<7> [804.094350] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 0: start 0x52008
<7> [804.094504] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 1: start 0x52108
<7> [804.094671] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 2: start 0x52208
<7> [804.094804] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 3: start 0x52308
<7> [804.095090] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe C] FQ 4: start 0x523c8
<7> [804.095247] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 0: start 0x59008
<7> [804.095402] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 1: start 0x59108
<7> [804.095548] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 2: start 0x59208
<7> [804.095680] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 3: start 0x59308
<7> [804.095809] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:505:pipe D] FQ 4: start 0x593c8
<7> [804.096061] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [804.096310] xe 0000:0a:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no
<7> [804.096475] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [804.096628] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [804.096768] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [804.096936] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: no [fastset]
<7> [804.097080] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe B] enable: no [fastset]
<7> [804.097211] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe C] enable: no [fastset]
<7> [804.097343] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:505:pipe D] enable: no [fastset]
<7> [804.097963] xe 0000:0a:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff30f2 0x28d32a71)
<7> [804.098303] xe 0000:0a:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [804.098649] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<7> [804.098916] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe B]
<7> [804.099083] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe C]
<7> [804.099326] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:505:pipe D]
<6> [804.099456] mei_lb xe.mei-gscfi.2560-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:0a:00.0 (ops xe_late_bind_component_ops [xe])
<7> [804.099572] xe 0000:0a:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03010 0x28d00071)
<7> [804.099786] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [804.101480] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:508:DP-4] adding connector to sysfs
<7> [804.102116] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card1-DP-4
<7> [804.104509] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:508:DP-4] generating connector hotplug event
<7> [804.104652] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:521:HDMI-A-5] adding connector to sysfs
<7> [804.105706] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:521:HDMI-A-5] generating connector hotplug event
<7> [804.105896] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:527:DP-5] adding connector to sysfs
<7> [804.107519] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card1-DP-5
<7> [804.109748] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:527:DP-5] generating connector hotplug event
<7> [804.109865] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:535:HDMI-A-6] adding connector to sysfs
<7> [804.111403] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:535:HDMI-A-6] generating connector hotplug event
<7> [804.111563] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:539:HDMI-A-7] adding connector to sysfs
<7> [804.112891] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:539:HDMI-A-7] generating connector hotplug event
<7> [804.113038] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:543:DP-6] adding connector to sysfs
<7> [804.114344] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card1-DP-6
<7> [804.116407] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:543:DP-6] generating connector hotplug event
<7> [804.116459] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:551:HDMI-A-8] adding connector to sysfs
<7> [804.116756] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:551:HDMI-A-8] generating connector hotplug event
<6> [804.116791] [drm] Initialized xe 1.1.0 for 0000:0a:00.0 on minor 1
<7> [804.116883] xe 0000:0a:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [804.117039] xe 0000:0a:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<7> [804.117950] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:151:pipe A] not active, skipping
<7> [804.118064] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe B] not active, skipping
<7> [804.118171] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:269:pipe C] not active, skipping
<7> [804.118272] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:505:pipe D] not active, skipping
<7> [804.118371] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [804.118566] xe 0000:0a:00.0: [drm:drm_client_modeset_probe]
<7> [804.118614] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-4]
<7> [804.118619] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-4]
<7> [804.122769] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-4] status updated from unknown to disconnected
<7> [804.123437] xe 0000:0a:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [804.123741] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-4] disconnected
<7> [804.123750] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:HDMI-A-5]
<7> [804.123754] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-5]
<7> [804.127990] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:HDMI-A-5] status updated from unknown to disconnected
<7> [804.127997] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:HDMI-A-5] disconnected
<7> [804.128002] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:DP-5]
<7> [804.128006] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-5]
<7> [804.132158] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:DP-5] status updated from unknown to disconnected
<7> [804.132166] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:DP-5] disconnected
<7> [804.132170] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:HDMI-A-6]
<7> [804.132174] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-6]
<7> [804.136425] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:HDMI-A-6] status updated from unknown to disconnected
<7> [804.136431] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:HDMI-A-6] disconnected
<7> [804.136436] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:HDMI-A-7]
<7> [804.136439] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-7]
<7> [804.140664] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:HDMI-A-7] status updated from unknown to disconnected
<7> [804.140669] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:HDMI-A-7] disconnected
<7> [804.140672] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-6]
<7> [804.140676] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-6]
<7> [804.144857] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-6] status updated from unknown to disconnected
<7> [804.144863] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-6] disconnected
<7> [804.144866] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-8]
<7> [804.144870] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-8]
<7> [804.149073] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-8] status updated from unknown to disconnected
<7> [804.149079] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-8] disconnected
<7> [804.149083] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [804.149086] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:DP-4] enabled? no
<7> [804.149089] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:521:HDMI-A-5] enabled? no
<7> [804.149092] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:DP-5] enabled? no
<7> [804.149094] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:535:HDMI-A-6] enabled? no
<7> [804.149097] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:539:HDMI-A-7] enabled? no
<7> [804.149099] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-6] enabled? no
<7> [804.149101] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:551:HDMI-A-8] enabled? no
<7> [804.149123] xe 0000:0a:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [804.149130] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [804.149367] xe 0000:0a:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [804.149374] xe 0000:0a:00.0: [drm] Cannot find any crtc or sizes
<7> [804.150490] xe 0000:0a:00.0: [drm:drm_client_modeset_probe]
<7> [804.150461] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [804.150616] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [804.150741] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [804.150856] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [804.150982] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-4]
<7> [804.151705] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [804.151847] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [804.152179] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [804.152301] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [804.152413] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [804.152521] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [804.152624] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [804.152728] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [804.152832] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [804.153154] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [804.153270] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [804.153376] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [804.153480] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [804.153581] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [804.153701] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [804.153823] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [804.154165] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [804.154310] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [804.155260] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-5]
<7> [804.159446] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-5]
<7> [804.163706] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-6]
<7> [804.167887] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-7]
<7> [804.172135] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-6]
<6> [804.172394] xe 0000:0a:00.0: [drm] Using mailbox commands for power limits
<7> [804.173000] xe 0000:0a:00.0: [drm:xe_hwmon_register [xe]] thermal info read val 0x3c78647d val1 0x69
<7> [804.173189] xe 0000:0a:00.0: [drm:xe_hwmon_register [xe]] thermal config count 0x9
<7> [804.173296] xe 0000:0a:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [804.173804] xe 0000:0a:00.0: [drm] PL2 is supported on channel 0
<7> [804.173844] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [804.174143] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [804.174404] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [804.176287] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-8]
<7> [804.178394] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [804.183038] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-4]
<7> [804.183071] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-4]
<7> [804.186996] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [804.189133] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-4] disconnected
<7> [804.189146] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:HDMI-A-5]
<7> [804.189153] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-5]
<7> [804.193356] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:HDMI-A-5] disconnected
<7> [804.193366] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:DP-5]
<7> [804.193371] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-5]
<7> [804.195928] xe 0000:0a:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [804.197619] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:DP-5] disconnected
<7> [804.197631] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:HDMI-A-6]
<7> [804.197637] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-6]
<7> [804.201880] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:HDMI-A-6] disconnected
<7> [804.201893] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:HDMI-A-7]
<7> [804.201899] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-7]
<7> [804.204449] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [804.204715] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x02000000)
<7> [804.205005] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [804.205252] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x0a000000)
<7> [804.205446] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [804.205613] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x2a000000)
<7> [804.205809] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [804.205979] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0xaa000000)
<7> [804.206175] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [804.206422] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [804.206673] xe 0000:0a:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [804.206915] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [804.207059] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [804.207124] [IGT] xe_module_load: finished subtest load, SUCCESS
<7> [804.207186] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:HDMI-A-7] disconnected
<7> [804.207198] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-6]
<7> [804.207205] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-6]
<6> [804.207313] [IGT] xe_module_load: exiting, ret=0
<7> [804.211489] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-6] disconnected
<7> [804.211499] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-8]
<7> [804.211505] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-8]
<7> [804.215696] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-8] disconnected
<7> [804.215704] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [804.215715] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:DP-4] enabled? no
<7> [804.215718] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:521:HDMI-A-5] enabled? no
<7> [804.215720] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:DP-5] enabled? no
<7> [804.215723] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:535:HDMI-A-6] enabled? no
<7> [804.215726] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:539:HDMI-A-7] enabled? no
<7> [804.215728] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-6] enabled? no
<7> [804.215731] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:551:HDMI-A-8] enabled? no
<7> [804.215873] xe 0000:0a:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [804.215890] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [804.216051] xe 0000:0a:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [804.216061] xe 0000:0a:00.0: [drm] Cannot find any crtc or sizes
<7> [804.216095] xe 0000:0a:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [804.216104] xe 0000:0a:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<6> [804.216090] snd_hda_intel 0000:0b:00.0: bound 0000:0a:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [804.216151] xe 0000:0a:00.0: [drm:drm_client_modeset_probe]
<7> [804.216189] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-4]
<7> [804.216194] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:DP-4]
<7> [804.216239] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [804.216632] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [804.217149] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [804.217349] xe 0000:0a:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7> [804.221450] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:DP-4] disconnected
<7> [804.221456] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:HDMI-A-5]
<7> [804.221460] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:521:HDMI-A-5]
<3> [804.222041] snd_hda_intel 0000:0b:00.0: Unknown capability 0
<7> [804.225578] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:HDMI-A-5] disconnected
<7> [804.227736] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:DP-5]
<7> [804.227740] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:527:DP-5]
<7> [804.231854] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:DP-5] disconnected
<7> [804.231858] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:HDMI-A-6]
<7> [804.231861] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:535:HDMI-A-6]
<7> [804.235993] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:HDMI-A-6] disconnected
<7> [804.235998] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:HDMI-A-7]
<7> [804.236001] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:539:HDMI-A-7]
|