Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.02 seconds
Igt-Version 
IGT-Version: 2.4-g5b279a8b7 (x86_64) (Linux: 7.0.0-lgci-xe-xe-4921-898b5aa235c5b269d-debug+ x86_64)
Out 
Using IGT_SRANDOM=1776757885 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.022s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.022s)
Dmesg
<6> [811.821851] Console: switching to colour dummy device 80x25
<6> [811.821911] [IGT] kms_force_connector_basic: executing
<7> [811.825054] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:544:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [811.825065] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [811.825072] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [811.829210] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [811.829385] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [811.829525] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [811.829717] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<7> [811.829746] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [811.829751] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [811.833913] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<7> [811.833931] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [811.833936] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [811.838108] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<6> [811.838177] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [811.838532] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:544:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [811.838541] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [811.838545] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [811.838821] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [811.838926] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [811.839176] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [811.839345] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [811.839360] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [811.839459] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [811.841712] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [811.841721] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [811.841818] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] status updated from disconnected to connected
<7> [811.841885] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] probed modes:
<7> [811.841889] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [811.841893] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [811.841897] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [811.841901] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [811.841904] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [811.841930] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [811.841934] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [811.842179] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [811.842286] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [811.842530] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [811.842627] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [811.842635] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [811.842729] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [811.843210] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [811.843304] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [811.845107] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [811.845116] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [811.845285] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] probed modes:
<7> [811.845290] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [811.845294] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [811.845299] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [811.845303] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [811.845306] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [811.845480] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:544:HDMI-A-1] EDID override set
<7> [811.845509] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [811.845513] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [811.845659] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:544:HDMI-A-1] ELD monitor IGT
<7> [811.845663] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:544:HDMI-A-1] ELD size 24, SAD count 0
<7> [811.845827] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [811.845925] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [811.846169] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [811.846273] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [811.846402] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [811.846413] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [811.846420] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] probed modes:
<7> [811.846423] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [811.846427] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [811.846430] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [811.846434] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [811.846437] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [811.846440] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [811.846553] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:544:HDMI-A-1] EDID override set
<7> [811.846577] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [811.846581] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [811.846726] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:544:HDMI-A-1] ELD monitor IGT
<7> [811.846729] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:544:HDMI-A-1] ELD size 24, SAD count 0
<7> [811.846731] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:544:HDMI-A-1] EDID changed, epoch counter 4
<7> [811.847490] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [811.847604] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [811.847852] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [811.847947] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [811.848054] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [811.848063] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] probed modes:
<7> [811.848067] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [811.848070] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [811.848074] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [811.848077] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [811.848081] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [811.848175] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:544:HDMI-A-1] EDID override reset
<7> [811.848207] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [811.848211] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [811.848480] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [811.848578] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [811.848813] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [811.848906] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [811.848914] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [811.849007] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [811.851333] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [811.851341] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [811.851435] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:544:HDMI-A-1] EDID changed, epoch counter 5
<7> [811.851490] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [811.851497] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [811.851504] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] probed modes:
<7> [811.851507] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [811.851511] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [811.851514] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [811.851517] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [811.851520] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [811.851655] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:544:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [811.851661] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [811.851666] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [811.855833] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] status updated from connected to disconnected
<7> [811.855844] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<7> [811.855873] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [811.855934] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [811.855961] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [811.855966] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [811.860151] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<6> [811.860252] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [811.861081] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [811.861619] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [811.861864] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [811.861872] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [811.861958] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:DP-1]
<7> [811.861968] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:DP-1]
<7> [811.862126] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:DP-1] disconnected
<7> [811.862132] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2]
<7> [811.862137] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]
<7> [811.862314] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2] disconnected
<7> [811.862320] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-3]
<7> [811.862324] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:535:DP-3]
<7> [811.862468] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-3] disconnected
<7> [811.862473] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [811.862477] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [811.866669] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<7> [811.866678] xe 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [811.866682] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:512:DP-1] enabled? no
<7> [811.866686] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-2] enabled? no
<7> [811.866689] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:535:DP-3] enabled? no
<7> [811.866692] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:544:HDMI-A-1] enabled? no
<7> [811.866712] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [811.866721] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config
<7> [811.867132] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [811.867830] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:512:DP-1] EDID override reset
<7> [811.867849] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:DP-1]
<7> [811.867854] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:DP-1]
<7> [811.868034] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:DP-1] disconnected
<7> [811.868124] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:526:DP-2] EDID override reset
<7> [811.868139] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2]
<7> [811.868143] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]
<7> [811.868304] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2] disconnected
<7> [811.868387] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:535:DP-3] EDID override reset
<7> [811.868401] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-3]
<7> [811.868404] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:535:DP-3]
<7> [811.868550] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-3] disconnected
<7> [811.868692] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:544:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [811.868698] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [811.868702] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [811.872880] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<7> [811.872909] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [811.872914] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [811.877062] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<7> [811.877162] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:544:HDMI-A-1] EDID override reset
<7> [811.877178] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [811.877182] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [811.881360] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<7> [811.882474] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [811.882684] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [811.884406] Console: switching to colour frame buffer device 128x48
Created at 2026-04-21 08:04:09