Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.02 seconds
Igt-Version 
IGT-Version: 2.4-g5b279a8b7 (x86_64) (Linux: 7.0.0-lgci-xe-xe-4918-2a1c604bebed8cbbe-debug+ x86_64)
Out 
Using IGT_SRANDOM=1776380952 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.021s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.021s)
Dmesg
<6> [812.435414] Console: switching to colour dummy device 80x25
<6> [812.435470] [IGT] kms_force_connector_basic: executing
<7> [812.438384] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:544:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [812.438394] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [812.438445] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [812.441417] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [812.441593] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [812.441732] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [812.442648] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<7> [812.442678] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [812.442683] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [812.446884] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<7> [812.446902] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [812.446907] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [812.451076] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<6> [812.451164] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [812.451514] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:544:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [812.451523] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [812.451528] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [812.451827] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [812.451939] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [812.452186] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [812.452285] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [812.452298] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [812.452396] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [812.454658] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [812.454667] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [812.454766] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] status updated from disconnected to connected
<7> [812.454832] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] probed modes:
<7> [812.454836] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [812.454840] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [812.454844] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [812.454848] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [812.454851] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [812.454865] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [812.454942] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [812.454973] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [812.454977] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [812.455227] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [812.455323] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [812.455578] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [812.455677] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [812.455686] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [812.455780] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [812.458014] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [812.458024] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [812.458176] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] probed modes:
<7> [812.458180] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [812.458184] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [812.458187] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [812.458191] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [812.458194] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [812.458381] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:544:HDMI-A-1] EDID override set
<7> [812.458419] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [812.458424] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [812.458571] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:544:HDMI-A-1] ELD monitor IGT
<7> [812.458575] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:544:HDMI-A-1] ELD size 24, SAD count 0
<7> [812.458741] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [812.458839] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [812.459081] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [812.459175] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [812.459304] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [812.459314] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [812.459321] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] probed modes:
<7> [812.459325] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [812.459328] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [812.459332] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [812.459335] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [812.459338] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [812.459341] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [812.459491] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:544:HDMI-A-1] EDID override set
<7> [812.459519] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [812.459523] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [812.459666] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:544:HDMI-A-1] ELD monitor IGT
<7> [812.459670] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:544:HDMI-A-1] ELD size 24, SAD count 0
<7> [812.459673] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:544:HDMI-A-1] EDID changed, epoch counter 4
<7> [812.459837] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [812.459936] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [812.460177] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [812.460271] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [812.460361] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [812.460368] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] probed modes:
<7> [812.460371] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [812.460375] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [812.460379] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [812.460382] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [812.460386] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [812.460499] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:544:HDMI-A-1] EDID override reset
<7> [812.460524] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [812.460528] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [812.460793] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [812.460891] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [812.461138] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [812.461232] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [812.461238] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [812.461332] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [812.463610] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [812.463617] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [812.463712] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:544:HDMI-A-1] EDID changed, epoch counter 5
<7> [812.463764] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [812.463771] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [812.463778] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] probed modes:
<7> [812.463781] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [812.463785] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [812.463788] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [812.463791] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [812.463794] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [812.463928] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:544:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [812.463933] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [812.463938] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [812.468085] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] status updated from connected to disconnected
<7> [812.468094] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<7> [812.468122] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [812.468177] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [812.468203] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [812.468207] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [812.472349] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<6> [812.472439] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [812.473250] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [812.473777] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [812.474017] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [812.474024] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [812.474085] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:DP-1]
<7> [812.474091] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:DP-1]
<7> [812.474246] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:DP-1] disconnected
<7> [812.474252] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2]
<7> [812.474256] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]
<7> [812.474515] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2] disconnected
<7> [812.474520] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-3]
<7> [812.474524] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:535:DP-3]
<7> [812.474666] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-3] disconnected
<7> [812.474671] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [812.474675] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [812.478834] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<7> [812.478839] xe 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [812.478843] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:512:DP-1] enabled? no
<7> [812.478846] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-2] enabled? no
<7> [812.478849] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:535:DP-3] enabled? no
<7> [812.478852] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:544:HDMI-A-1] enabled? no
<7> [812.478871] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [812.478881] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config
<7> [812.479261] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [812.479922] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:512:DP-1] EDID override reset
<7> [812.479938] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:DP-1]
<7> [812.479943] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:DP-1]
<7> [812.480100] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:DP-1] disconnected
<7> [812.480185] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:526:DP-2] EDID override reset
<7> [812.480201] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2]
<7> [812.480204] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]
<7> [812.480350] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2] disconnected
<7> [812.480456] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:535:DP-3] EDID override reset
<7> [812.480471] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-3]
<7> [812.480474] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:535:DP-3]
<7> [812.480614] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-3] disconnected
<7> [812.480756] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:544:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [812.480761] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [812.480765] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [812.484921] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<7> [812.484950] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [812.484954] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [812.489116] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<7> [812.489200] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:544:HDMI-A-1] EDID override reset
<7> [812.489214] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [812.489218] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [812.493389] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<7> [812.494283] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [812.494425] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [812.495541] Console: switching to colour frame buffer device 128x48
Created at 2026-04-16 23:21:53