Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.4-g9b95600c4 (x86_64) (Linux: 7.0.0-lgci-xe-xe-4915-9ac7dca8d82a4e6d9-debug+ x86_64)
Out 
Using IGT_SRANDOM=1776366396 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.025s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.025s)
Dmesg
<6> [821.558247] Console: switching to colour dummy device 80x25
<6> [821.558310] [IGT] kms_force_connector_basic: executing
<7> [821.562218] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:390:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [821.562229] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [821.562236] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [821.566426] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected
<7> [821.566502] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [821.566507] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [821.567073] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [821.567273] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [821.567404] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [821.570709] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected
<7> [821.570813] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [821.570818] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [821.575125] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected
<6> [821.575255] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [821.575706] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:390:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [821.575715] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [821.575721] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [821.576046] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [821.576229] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [821.576529] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [821.576703] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [821.576717] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [821.576860] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [821.579234] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [821.579244] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [821.579408] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] status updated from disconnected to connected
<7> [821.579486] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes:
<7> [821.579491] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [821.579497] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [821.579502] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [821.579507] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [821.579512] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [821.579534] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [821.579639] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [821.579688] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [821.579694] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [821.580039] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [821.580216] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [821.580532] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [821.580690] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [821.580701] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [821.580857] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [821.583334] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [821.583349] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [821.583671] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes:
<7> [821.583679] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [821.583687] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [821.583694] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [821.583700] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [821.583707] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [821.584121] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:390:HDMI-A-1] EDID override set
<7> [821.584169] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [821.584176] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [821.584412] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor IGT
<7> [821.584419] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 24, SAD count 0
<7> [821.584584] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [821.584757] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [821.585075] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [821.585341] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [821.585601] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [821.585622] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [821.585638] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes:
<7> [821.585646] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [821.585655] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [821.585663] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [821.585672] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [821.585679] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [821.585687] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [821.585972] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:390:HDMI-A-1] EDID override set
<7> [821.586035] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [821.586045] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [821.586406] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor IGT
<7> [821.586413] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 24, SAD count 0
<7> [821.586420] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:390:HDMI-A-1] EDID changed, epoch counter 4
<7> [821.586602] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [821.586878] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [821.587376] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [821.587633] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [821.587828] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [821.587846] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes:
<7> [821.587853] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [821.587861] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [821.587868] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [821.587875] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [821.587882] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [821.588098] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:390:HDMI-A-1] EDID override reset
<7> [821.588139] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [821.588146] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [821.588502] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [821.588719] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [821.589064] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [821.589237] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [821.589249] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [821.589423] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [821.591852] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [821.591863] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [821.592050] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:390:HDMI-A-1] EDID changed, epoch counter 5
<7> [821.592120] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [821.592132] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [821.592142] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes:
<7> [821.592147] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [821.592153] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [821.592158] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [821.592163] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [821.592168] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [821.592390] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:390:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [821.592398] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [821.592404] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [821.596573] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] status updated from connected to disconnected
<7> [821.596584] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected
<7> [821.596615] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [821.596683] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [821.596714] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [821.596719] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [821.600900] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected
<6> [821.600991] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [821.601716] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [821.602224] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [821.602457] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [821.602462] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [821.602504] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [821.602508] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [821.606639] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected
<7> [821.606662] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]
<7> [821.606669] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]
<7> [821.606887] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected
<7> [821.606893] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2]
<7> [821.606897] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:409:DP-2]
<7> [821.607070] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] disconnected
<7> [821.607075] xe 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [821.607081] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:390:HDMI-A-1] enabled? no
<7> [821.607085] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no
<7> [821.607089] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:409:DP-2] enabled? no
<7> [821.607117] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [821.607129] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config
<7> [821.607656] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [821.608736] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:390:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [821.608745] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [821.608752] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [821.612956] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected
<7> [821.613063] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [821.613069] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [821.617232] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected
<7> [821.617407] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:390:HDMI-A-1] EDID override reset
<7> [821.617441] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [821.617447] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [821.621628] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected
<7> [821.621793] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:400:DP-1] EDID override reset
<7> [821.621820] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]
<7> [821.621826] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]
<7> [821.622101] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected
<7> [821.622255] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:409:DP-2] EDID override reset
<7> [821.622281] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2]
<7> [821.622288] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:409:DP-2]
<7> [821.622521] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] disconnected
<7> [821.623817] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [821.624080] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [821.625958] Console: switching to colour frame buffer device 128x48
Created at 2026-04-16 19:30:23