igt@kms_plane_scaling@plane-downscale-factor-0-75-with-pixel-format@pipe-b on shard-lnl@xe-4913-207a25698a481a39132b52060d7bb294384876ac Test details

Detail	Value
Duration	2.89 seconds
Hostname	shard-lnl-8
Igt-Version	IGT-Version: 2.4-g9b95600c4 (x86_64) (Linux: 7.0.0-lgci-xe-xe-4913-207a25698a481a391-debug+ x86_64)
Out	Starting dynamic subtest: pipe-B Trying on eDP-1 Dynamic subtest pipe-B: SUCCESS (2.893s)
Err	Starting dynamic subtest: pipe-B Dynamic subtest pipe-B: SUCCESS (2.893s)
Dmesg	<6> [398.121097] [IGT] kms_plane_scaling: starting dynamic subtest pipe-B <7> [398.124688] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [398.126493] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [398.126880] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:270:pipe B] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [398.127223] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000 <7> [398.127549] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [398.127868] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:270:pipe B] <7> [398.128192] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [398.128547] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [398.128833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [398.129102] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [398.129408] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0) <7> [398.129658] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [398.129898] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [398.130126] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0) <7> [398.130404] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0) <7> [398.130619] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0) <7> [398.130825] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0) <7> [398.131024] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0) <7> [398.131242] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0) <7> [398.131435] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [398.131628] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [398.131840] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [398.132023] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0) <7> [398.132257] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0) <7> [398.132422] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0) <7> [398.132584] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0) <7> [398.132746] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0) <7> [398.132899] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0) <7> [398.133047] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0) <7> [398.133215] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0) <7> [398.133358] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0) <7> [398.133497] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [398.133659] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [398.133816] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [398.133974] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0) <7> [398.134113] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0) <7> [398.134274] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0) <7> [398.134405] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [398.134533] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [398.134660] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [398.134782] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [398.134900] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0) <7> [398.135015] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0) <7> [398.135126] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 432000, found 0) <7> [398.135263] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [398.135374] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.enable (expected no, found yes) <7> [398.135482] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [398.135590] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1) <7> [398.135692] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in lane_count (expected 0, found 4) <7> [398.135794] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288) <7> [398.135895] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [398.136000] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [398.136099] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880) <7> [398.136212] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040) <7> [398.136311] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880) <7> [398.136409] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040) <7> [398.136510] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928) <7> [398.136613] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960) <7> [398.136710] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [398.136807] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [398.136896] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [398.136982] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809) <7> [398.137067] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906) <7> [398.137157] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906) <7> [398.137279] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880) <7> [398.137388] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040) <7> [398.137477] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880) <7> [398.137562] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040) <7> [398.137647] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928) <7> [398.137727] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960) <7> [398.137801] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [398.137878] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [398.137960] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [398.138041] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809) <7> [398.138137] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906) <7> [398.138171] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [398.138234] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906) <7> [398.138342] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [398.138318] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [398.138449] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [398.138452] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [398.138540] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [398.138632] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [398.138712] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710) <7> [398.138796] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710) <7> [398.138876] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in port_clock (expected 0, found 432000) <7> [398.138960] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] fastset requirement not met, forcing full modeset <7> [398.139046] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0 <7> [398.139154] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [398.139274] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x2 <7> [398.139352] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:270:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x1 -> 0x2 <7> [398.139418] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0 <7> [398.139479] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [398.139535] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:264:cursor B] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7> [398.139589] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [398.139643] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [398.139702] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [398.139767] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [398.139856] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [398.139988] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [398.140110] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [398.140286] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [398.140438] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [398.140539] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [398.140647] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min cdclk: 309076 kHz -> 0 kHz <7> [398.140737] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:270:pipe B] min cdclk: 0 kHz -> 309076 kHz <7> [398.140832] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 77269 kHz -> 19318 kHz <7> [398.140933] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:270:pipe B] allocated DPLL 0 <7> [398.141010] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:270:pipe B] reserving DPLL 0 <7> [398.141096] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [398.141180] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: no [modeset] <7> [398.141294] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [398.141405] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [398.141498] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [398.141578] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [398.141658] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [398.141737] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [398.141815] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: yes [modeset] <7> [398.141901] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [398.141983] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0 <7> [398.142061] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [398.142145] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [398.142253] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [398.142354] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [398.142449] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7> [398.142525] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [398.142600] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7> [398.142675] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [398.142755] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [398.142836] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7> [398.142912] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [398.142988] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [398.143063] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [398.143142] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [398.143240] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [398.143349] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [398.143453] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [398.143538] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [398.143616] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [398.143693] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7> [398.143771] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7> [398.143846] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [398.143922] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [398.143997] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [398.144071] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [398.144157] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [398.144270] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [398.144382] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 309076, min voltage level 0 <7> [398.144469] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7> [398.144543] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x40, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [398.144624] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0 <7> [398.144702] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [398.144782] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [398.144862] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [398.144936] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [398.145008] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no, <7> [398.145085] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7> [398.145179] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [398.145288] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [398.145387] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [398.145473] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [398.145545] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [398.145616] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [398.145694] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [398.145774] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [398.145854] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [398.145931] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [398.146002] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [398.146077] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [398.146156] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [398.146250] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [398.146346] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [398.146444] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [398.146542] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [398.146639] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [398.146719] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [398.146798] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:154:plane 1B] fb: [FB:432] 2880x1800 format = RG16 little-endian (0x36314752) modifier = 0x0, visible: yes <7> [398.146874] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0 <7> [398.146949] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2160x1350+0+0 <7> [398.147041] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:184:plane 2B] fb: [NOFB], visible: no <7> [398.147121] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:214:plane 3B] fb: [NOFB], visible: no <7> [398.147258] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:244:plane 4B] fb: [NOFB], visible: no <7> [398.147354] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:254:plane 5B] fb: [NOFB], visible: no <7> [398.147446] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:264:cursor B] fb: [NOFB], visible: no <7> [398.148957] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [398.149079] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [398.149232] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [398.149417] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [398.149581] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000) <7> [398.149737] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [398.149828] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [398.355430] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0 <7> [398.355872] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [398.369490] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off <7> [398.369781] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time <7> [398.370047] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [398.422706] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [398.423017] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short <7> [398.431224] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [398.431550] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A] <7> [398.431597] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A] <7> [398.432921] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [398.433299] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [398.433653] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A] <7> [398.433921] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1] <7> [398.434159] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A] <7> [398.434374] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B] <7> [398.434569] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C] <7> [398.434796] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2] <7> [398.434997] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A] <7> [398.435205] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B] <7> [398.435398] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C] <7> [398.435634] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3] <7> [398.435837] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A] <7> [398.436045] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B] <7> [398.436261] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C] <7> [398.436446] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:402:DP-1] <7> [398.436636] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:414:DP-2] <7> [398.436848] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:422:DP-3] <7> [398.437102] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 6 (mbus joined: yes) <7> [398.437372] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [398.438865] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:270:pipe B] <7> [398.439114] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [398.441386] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on <7> [398.441609] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (490 ms remaining) <7> [398.457589] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [398.457912] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long <7> [398.458228] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [398.458598] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A] <7> [398.939846] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [399.027310] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [399.027638] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on <7> [399.027915] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7> [399.064554] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [399.064916] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long <7> [399.065271] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7> [399.065640] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A] <7> [399.235314] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [399.235754] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on <7> [399.236152] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7> [399.238240] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [399.239777] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [399.240590] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7> [399.241692] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [399.243066] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [399.244199] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK <7> [399.244547] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7> [399.246149] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [399.246574] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7> [399.247350] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe B <7> [399.247826] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [399.248205] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe B <7> [399.248592] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 4518 <7> [399.264684] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [399.265279] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000) <7> [399.265862] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A] <7> [399.266425] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [399.268207] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1] <7> [399.268612] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:270:pipe B] <7> [399.272530] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe B <7> [399.272906] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [399.273007] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [399.273120] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [399.273467] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [399.273747] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.274021] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.274358] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.274623] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.274991] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [399.275408] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [399.275779] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [399.276133] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.276463] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.276768] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [399.277616] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [399.282692] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [399.282915] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [399.283243] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [399.283495] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.283689] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.283857] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [399.284019] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [399.284227] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [399.284558] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [399.284722] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [399.284862] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.284996] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.285143] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [399.285286] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [399.285436] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [399.285629] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [399.285810] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [399.285987] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [399.286171] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [399.286335] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [399.286556] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 19318 kHz -> 38635 kHz <7> [399.286722] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [399.297907] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [399.299271] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [399.299310] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:434] is removed <7> [399.299340] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [399.299473] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [399.299578] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.299697] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.299894] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.300131] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.300352] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [399.300603] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [399.300743] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [399.300881] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.301014] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.301160] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [399.301505] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [399.315816] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [399.315994] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [399.316318] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [399.316581] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.316778] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.316954] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [399.317216] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [399.317425] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [399.317673] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [399.317905] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [399.318128] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [399.318346] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [399.318576] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [399.318874] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [399.331215] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [399.332848] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [399.332948] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [399.333015] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [399.333501] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [399.333810] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.333998] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.334200] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.334370] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.334588] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [399.334837] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [399.335063] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [399.335307] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.335519] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.335718] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [399.336247] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [399.349555] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [399.349763] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [399.350061] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [399.350407] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.350622] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.350855] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [399.351114] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [399.351387] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [399.351710] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400 <7> [399.352127] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400 <7> [399.352477] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [399.352774] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [399.353033] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193 <7> [399.353387] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 38635 kHz -> 77269 kHz <7> [399.353727] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [399.364558] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [399.366280] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [399.366363] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:434] is removed <7> [399.366416] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [399.366706] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [399.366945] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.367183] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.367377] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.367577] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.367790] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [399.368051] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [399.368349] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [399.368602] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.368835] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.369064] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [399.369634] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [399.388103] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [399.388275] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [399.388500] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [399.388656] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.388794] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.388927] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [399.389052] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [399.389230] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [399.389438] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [399.389637] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [399.389799] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [399.389964] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [399.390136] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [399.390343] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [399.397897] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [399.399482] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [399.399540] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [399.399578] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [399.399820] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [399.400022] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.400261] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.400470] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.400676] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.400851] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [399.401072] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [399.401325] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [399.401531] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.401729] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.401946] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [399.402426] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [399.421039] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [399.421302] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [399.421585] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B] <7> [399.421854] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408 <7> [399.422053] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643 <7> [399.422299] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.422502] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.422703] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [399.422935] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [399.423151] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.423333] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.423531] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [399.423698] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [399.423891] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2 <7> [399.424152] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1948 qgv_peak_bw: 38400 <7> [399.424406] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1948 qgv_peak_bw: 38400 <7> [399.424656] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1948 qgv_peak_bw: 38400 <7> [399.424884] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1948 qgv_peak_bw: 38400 <7> [399.425106] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1948 <7> [399.425373] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [399.431178] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [399.432423] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [399.432457] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [399.432489] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [399.432620] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 1408) -> ( 0 - 0), size 1408 -> 0 <7> [399.432770] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1408 - 4051) -> ( 0 - 0), size 2643 -> 0 <7> [399.432961] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.433206] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.433406] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.433620] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.433704] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.433786] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.433869] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.433947] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.434036] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [399.434176] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [399.434293] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [399.434404] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.434516] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.434644] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [399.434942] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [399.457673] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [399.457891] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [399.458165] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B] <7> [399.458443] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456 <7> [399.458654] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595 <7> [399.458837] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.459027] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.459233] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [399.459400] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [399.459593] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.459784] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.459952] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [399.460110] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [399.460280] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2 <7> [399.460499] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3895 qgv_peak_bw: 38400 <7> [399.460717] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3895 qgv_peak_bw: 38400 <7> [399.460917] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3895 qgv_peak_bw: 38400 <7> [399.461127] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3895 qgv_peak_bw: 38400 <7> [399.461330] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3895 <7> [399.461594] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [399.481244] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [399.482834] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [399.482902] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [399.482956] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [399.483238] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 1456) -> ( 0 - 0), size 1456 -> 0 <7> [399.483439] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1456 - 4051) -> ( 0 - 0), size 2595 -> 0 <7> [399.483631] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.483816] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.483990] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.484226] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.484388] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.484544] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.484695] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.484844] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.485007] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [399.485260] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [399.485495] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [399.485711] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.485920] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.486154] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [399.486669] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [399.507116] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [399.507244] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [399.507446] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [399.507616] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.507780] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.507915] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [399.508067] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [399.508306] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [399.508525] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [399.508737] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [399.508943] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [399.509152] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [399.509347] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [399.509594] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [399.514602] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [399.516047] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [399.516157] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [399.516206] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [399.516482] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [399.516652] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.516757] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.516860] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.516957] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.517064] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [399.517232] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [399.517370] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [399.517503] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.517636] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.517760] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [399.518101] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [399.540938] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [399.541146] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [399.541411] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [399.541568] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.541704] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.541833] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [399.541958] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [399.542119] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [399.542298] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [399.542482] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [399.542659] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [399.542820] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [399.542973] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [399.543206] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [399.547926] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [399.549222] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [399.549267] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [399.549296] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [399.549453] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [399.549570] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.549681] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.549789] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.549894] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.550006] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [399.550191] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [399.550354] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [399.550509] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.550656] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.550759] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [399.551034] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [399.573417] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [399.573555] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [399.573745] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [399.573893] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.574033] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.574199] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [399.574335] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [399.574507] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [399.574764] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [399.574899] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [399.575012] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.575143] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.575252] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [399.575360] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [399.575487] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [399.575658] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [399.575818] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [399.575976] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [399.576137] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [399.576301] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [399.576484] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [399.581201] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [399.582417] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [399.582453] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [399.582481] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [399.582606] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [399.582738] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.582930] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.583190] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.583381] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.583588] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [399.583733] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [399.583839] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [399.583941] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.584040] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.584156] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [399.584434] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [399.613310] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [399.613410] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [399.613570] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [399.613648] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.613717] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.613783] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [399.613847] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [399.613919] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [399.614012] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400 <7> [399.614115] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400 <7> [399.614216] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [399.614338] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [399.614443] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193 <7> [399.614567] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [399.615239] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [399.615741] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [399.615907] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [399.619433] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [399.619550] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [399.631170] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [399.632481] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [399.632524] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [399.632554] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [399.632727] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [399.632980] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.633273] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.633528] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.633682] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.633783] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [399.633935] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [399.634062] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [399.634205] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.634326] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.634448] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [399.634760] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [399.648826] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [399.649019] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [399.649321] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [399.649496] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.649656] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.649815] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [399.649965] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [399.650181] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [399.650409] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [399.650619] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [399.650818] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [399.651035] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [399.651252] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [399.651485] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [399.664469] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [399.665837] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [399.665901] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:434] is removed <7> [399.665938] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [399.666220] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [399.666429] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.666623] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.666770] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.666925] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.667097] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [399.667308] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [399.667489] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [399.667667] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.667834] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.668022] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [399.668510] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [399.682258] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [399.682443] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [399.682729] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [399.682936] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.683179] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.683387] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [399.683629] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [399.683862] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [399.684170] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [399.684421] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [399.684673] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [399.685012] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [399.685442] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [399.685802] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [399.697851] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [399.699430] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [399.699492] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [399.699533] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [399.699821] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [399.700077] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.700382] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.700621] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.700792] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.701008] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [399.701287] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [399.701518] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [399.701738] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.701949] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.702215] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [399.702699] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [399.715467] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [399.715657] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [399.715890] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [399.716070] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.716300] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.716484] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [399.716663] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [399.716845] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [399.717113] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [399.717354] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [399.717587] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [399.717809] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [399.718057] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [399.718346] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [399.731165] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [399.732723] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [399.732810] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:434] is removed <7> [399.732865] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [399.733227] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [399.733483] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.733685] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.733865] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.734029] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.734296] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [399.734543] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [399.734773] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [399.735034] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.735277] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.735485] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [399.735987] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [399.749437] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [399.749643] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [399.749982] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [399.750331] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.750559] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.750776] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [399.751019] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [399.751315] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [399.751630] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400 <7> [399.751929] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400 <7> [399.752231] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [399.752500] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [399.752790] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193 <7> [399.753132] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [399.764496] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [399.766165] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [399.766243] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [399.766291] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [399.766570] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [399.766791] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.766999] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.767245] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.767442] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.767705] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [399.767988] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [399.768281] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [399.768533] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.768792] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.769026] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [399.769608] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [399.788071] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [399.788242] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [399.788472] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [399.788651] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.788790] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.788915] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [399.789034] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [399.789197] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [399.789371] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [399.789537] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [399.789717] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [399.789872] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [399.790029] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [399.790242] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [399.797828] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [399.799408] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [399.799468] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [399.799507] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [399.799739] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [399.799985] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.800239] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.800445] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.800638] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.800810] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [399.801043] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [399.801295] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [399.801507] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.801721] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.801918] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [399.802384] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [399.820994] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [399.821274] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [399.821594] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B] <7> [399.821914] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408 <7> [399.822226] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643 <7> [399.822449] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.822681] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.822880] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [399.823094] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [399.823304] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.823494] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.823673] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [399.823843] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [399.824045] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2 <7> [399.824347] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1948 qgv_peak_bw: 38400 <7> [399.824596] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1948 qgv_peak_bw: 38400 <7> [399.824829] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1948 qgv_peak_bw: 38400 <7> [399.825049] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1948 qgv_peak_bw: 38400 <7> [399.825287] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1948 <7> [399.825589] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [399.831133] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [399.832399] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [399.832435] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [399.832466] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [399.832609] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 1408) -> ( 0 - 0), size 1408 -> 0 <7> [399.832789] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1408 - 4051) -> ( 0 - 0), size 2643 -> 0 <7> [399.832995] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.833246] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.833460] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.833618] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.833718] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.833812] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.833899] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.833986] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.834075] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [399.834217] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [399.834338] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [399.834453] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.834567] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.834684] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [399.834976] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [399.857423] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [399.857635] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [399.857948] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [399.858242] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B] <7> [399.858499] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456 <7> [399.858691] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595 <7> [399.858861] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.859020] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.859213] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [399.859390] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [399.859539] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.859686] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.859839] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [399.859995] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [399.860211] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2 <7> [399.860508] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [399.860660] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B] <7> [399.860820] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456 <7> [399.860948] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595 <7> [399.861088] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.861210] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.861340] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [399.861460] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [399.861571] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.861680] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.861787] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [399.861888] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [399.861996] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2 <7> [399.862178] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3895 qgv_peak_bw: 38400 <7> [399.862345] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3895 qgv_peak_bw: 38400 <7> [399.862517] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3895 qgv_peak_bw: 38400 <7> [399.862675] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3895 qgv_peak_bw: 38400 <7> [399.862848] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3895 <7> [399.863056] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [399.866110] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [399.866632] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [399.866765] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [399.867569] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [399.867682] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [399.881137] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [399.882525] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [399.882570] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [399.882615] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [399.882923] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 1456) -> ( 0 - 0), size 1456 -> 0 <7> [399.883269] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1456 - 4051) -> ( 0 - 0), size 2595 -> 0 <7> [399.883534] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.883692] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.883806] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.883928] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.884030] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.884158] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.884260] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.884355] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.884466] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [399.884625] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [399.884775] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [399.884918] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.885056] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.885211] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [399.885556] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [399.908380] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [399.908569] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [399.908837] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [399.909025] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.909276] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.909462] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [399.909631] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [399.909823] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [399.910053] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [399.910306] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [399.910516] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [399.910723] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [399.910922] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [399.911207] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [399.914467] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [399.915810] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [399.915881] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [399.915925] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [399.916221] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [399.916429] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.916574] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.916654] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.916732] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.916827] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [399.916957] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [399.917087] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [399.917199] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.917307] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.917411] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [399.917686] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [399.940098] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [399.940246] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [399.940468] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [399.940655] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.940806] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.940943] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [399.941104] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [399.941253] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [399.941446] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [399.941627] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [399.941799] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [399.941966] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [399.942138] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [399.942336] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [399.947863] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [399.949261] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [399.949326] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [399.949368] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [399.949611] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [399.949720] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.949819] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.949914] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.950015] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.950160] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [399.950302] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [399.950438] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [399.950571] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.950692] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.950803] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [399.951097] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [399.975003] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [399.975200] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [399.975465] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [399.975637] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [399.975785] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [399.975923] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [399.976054] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [399.976268] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [399.976458] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [399.976645] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [399.976820] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [399.976990] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [399.977168] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [399.977382] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [399.981204] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [399.982425] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [399.982466] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [399.982492] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [399.982604] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [399.982780] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [399.982973] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.983226] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.983416] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [399.983615] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [399.983726] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [399.983825] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [399.983923] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.984015] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [399.984118] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [399.984391] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.013523] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [400.013617] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [400.013755] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.013827] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.013895] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.013960] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [400.014024] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [400.014116] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [400.014231] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400 <7> [400.014348] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400 <7> [400.014450] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [400.014536] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [400.014623] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193 <7> [400.014737] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [400.015217] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [400.015726] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [400.015873] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [400.020446] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [400.020559] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [400.031234] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.032523] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [400.032565] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [400.032595] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.032784] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.033065] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.033415] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.033641] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.033724] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.033817] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.033943] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.034060] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.034200] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.034312] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.034419] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.034709] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.048641] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [400.048851] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [400.049145] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.049330] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.049495] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.049653] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [400.049804] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [400.049999] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [400.050244] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [400.050456] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [400.050651] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [400.050838] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [400.051019] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [400.051286] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [400.064431] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.066000] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [400.066134] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:434] is removed <7> [400.066202] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.066552] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.066747] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.066921] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.067075] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.067244] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.067418] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.067637] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.067861] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.068104] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.068327] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.068567] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.069132] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.082308] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [400.082528] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [400.082894] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.083226] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.083487] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.083741] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [400.083978] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [400.084290] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [400.084676] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [400.084971] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [400.085294] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.085632] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.085895] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [400.086249] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [400.097783] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.099422] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [400.099483] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [400.099526] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.099824] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.100162] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.100416] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.100656] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.100820] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.100991] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.101262] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.101492] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.101708] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.101915] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.102123] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.102584] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.115413] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [400.115607] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [400.115887] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.116157] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.116342] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.116521] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [400.116694] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [400.116894] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [400.117169] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [400.117421] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [400.117703] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.117933] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.118167] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [400.118458] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [400.131122] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.132744] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [400.132818] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:434] is removed <7> [400.132866] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.133207] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.133428] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.133628] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.133795] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.133957] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.134195] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.134432] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.134687] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.134906] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.135155] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.135362] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.135865] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.149384] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [400.149586] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [400.149901] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.150183] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.150408] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.150640] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [400.150846] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [400.151081] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [400.151487] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [400.151693] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.151866] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.152033] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.152251] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [400.152407] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [400.152600] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [400.152857] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400 <7> [400.153098] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400 <7> [400.153324] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [400.153550] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [400.153761] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193 <7> [400.154039] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [400.164426] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.165903] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [400.165986] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [400.166040] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.166380] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.166597] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.166718] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.166834] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.166951] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.167098] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.167264] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.167421] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.167577] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.167726] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.167889] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.168264] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.187542] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [400.187681] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [400.187877] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.188010] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.188161] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.188292] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [400.188428] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [400.188577] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [400.188749] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [400.188905] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [400.189051] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [400.189212] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [400.189350] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [400.189529] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [400.197773] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.199310] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [400.199370] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [400.199410] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.199635] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.199900] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.200147] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.200350] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.200541] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.200745] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.200975] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.201228] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.201445] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.201652] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.201892] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.202401] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.221219] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [400.221466] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [400.221751] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B] <7> [400.222096] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408 <7> [400.222311] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643 <7> [400.222506] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.222729] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.222907] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [400.223089] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [400.223282] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.223449] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.223613] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [400.223771] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [400.223950] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2 <7> [400.224228] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1948 qgv_peak_bw: 38400 <7> [400.224446] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1948 qgv_peak_bw: 38400 <7> [400.224654] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1948 qgv_peak_bw: 38400 <7> [400.224850] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1948 qgv_peak_bw: 38400 <7> [400.225044] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1948 <7> [400.225365] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [400.231090] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.232361] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [400.232397] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [400.232429] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.232563] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 1408) -> ( 0 - 0), size 1408 -> 0 <7> [400.232695] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1408 - 4051) -> ( 0 - 0), size 2643 -> 0 <7> [400.232888] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.233133] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.233329] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.233524] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.233643] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.233728] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.233812] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.233893] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.233986] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.234130] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.234254] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.234395] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.234527] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.234644] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.234940] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.257472] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [400.257712] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [400.257964] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B] <7> [400.258274] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456 <7> [400.258475] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595 <7> [400.258659] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.258834] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.258999] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [400.259218] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [400.259374] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.259525] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.259673] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [400.259819] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [400.259991] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2 <7> [400.260230] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3895 qgv_peak_bw: 38400 <7> [400.260445] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3895 qgv_peak_bw: 38400 <7> [400.260656] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3895 qgv_peak_bw: 38400 <7> [400.260860] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3895 qgv_peak_bw: 38400 <7> [400.261052] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3895 <7> [400.261321] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [400.265105] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [400.265473] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [400.265658] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [400.265788] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [400.265908] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [400.281110] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.282790] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [400.282875] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [400.282944] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.283296] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 1456) -> ( 0 - 0), size 1456 -> 0 <7> [400.283520] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1456 - 4051) -> ( 0 - 0), size 2595 -> 0 <7> [400.283740] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.283944] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.284187] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.284404] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.284613] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.284796] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.284977] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.285214] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.285422] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.285698] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.285957] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.286239] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.286474] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.286751] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.287381] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.308316] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [400.308481] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [400.308714] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.308881] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.309027] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.309208] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [400.309341] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [400.309512] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [400.309719] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [400.309894] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [400.310067] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.310232] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.310387] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [400.310581] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [400.314401] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.315650] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [400.315728] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [400.315777] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.316035] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.316341] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.316538] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.316681] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.316756] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.316829] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.316926] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.317020] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.317132] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.317243] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.317352] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.317589] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.339880] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [400.340031] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [400.340304] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.340481] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.340653] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.340789] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [400.340921] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [400.341095] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [400.341299] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [400.341484] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [400.341660] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.341826] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.341984] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [400.342203] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [400.347812] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.349240] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [400.349309] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [400.349352] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.349612] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.349724] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.349814] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.349901] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.349984] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.350093] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.350220] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.350340] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.350457] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.350573] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.350687] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.350966] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.374283] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [400.374470] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [400.374747] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.374933] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.375139] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.375287] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [400.375426] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [400.375583] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [400.375771] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [400.375948] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [400.376138] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.376304] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.376472] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [400.376683] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [400.381149] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.382379] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [400.382417] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [400.382444] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.382571] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.382662] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.382853] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.383057] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.383363] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.383596] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.383765] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.383869] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.383968] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.384078] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.384189] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.384467] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.414370] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [400.414469] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [400.414606] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.414683] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.414752] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.414814] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [400.414874] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [400.414943] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [400.415031] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400 <7> [400.415101] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [400.415144] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400 <7> [400.415258] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [400.415263] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [400.415375] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [400.415388] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [400.415471] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193 <7> [400.415600] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [400.421020] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [400.421222] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [400.431071] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.432333] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [400.432367] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [400.432395] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.432518] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.432603] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.432777] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.432995] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.433332] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.433555] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.433720] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.433831] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.433938] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.434042] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.434162] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.434438] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.448624] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [400.448849] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [400.449099] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.449294] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.449460] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.449608] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [400.449744] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [400.449900] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [400.450198] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [400.450340] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.450462] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.450582] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.450700] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [400.450832] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [400.450968] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [400.451164] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [400.451336] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [400.451498] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [400.451655] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [400.451807] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [400.452000] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [400.464364] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.465907] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [400.465980] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:434] is removed <7> [400.466033] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.466382] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.466590] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.466713] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.466828] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.466937] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.467101] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.467283] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.467442] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.467599] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.467748] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.467892] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.468281] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.481986] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [400.482173] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [400.482413] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.482581] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.482735] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.482891] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [400.483042] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [400.483282] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [400.483511] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [400.483729] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [400.483932] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.484147] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.484345] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [400.484602] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [400.497730] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.499266] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [400.499329] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [400.499373] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.499612] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.499847] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.500107] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.500331] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.500597] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.500805] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.501051] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.501334] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.501578] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.501799] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.502016] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.502576] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.515363] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [400.515545] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [400.515800] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.515994] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.516235] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.516432] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [400.516663] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [400.516880] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [400.517175] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [400.517428] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [400.517676] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.517919] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.518221] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [400.518502] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [400.531053] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.532768] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [400.532848] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:434] is removed <7> [400.532898] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.533238] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.533479] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.533686] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.533869] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.534100] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.534312] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.534574] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.534815] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.535038] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.535290] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.535496] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.536011] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.554732] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [400.554950] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [400.555289] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.555505] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.555703] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.555894] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [400.556110] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [400.556319] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [400.556598] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [400.556859] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [400.557125] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [400.557376] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [400.557624] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [400.557924] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [400.564336] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.565767] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [400.565833] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [400.565875] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.566141] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.566334] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.566525] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.566682] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.566840] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.567013] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.567234] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.567430] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.567620] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.567799] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.567977] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.568466] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.593669] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [400.593863] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [400.594154] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.594333] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.594497] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.594650] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [400.594789] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [400.594947] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [400.595185] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [400.595369] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [400.595556] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.595732] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.595896] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [400.596116] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [400.598096] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [400.598736] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [400.598916] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [400.599347] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [400.599477] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [400.614343] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.616000] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [400.616103] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [400.616160] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.616446] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.616673] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.616841] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.617002] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.617226] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.617399] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.617614] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.617819] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.618023] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.618236] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.618422] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.618888] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.643624] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [400.643832] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [400.644110] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.644304] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.644482] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.644649] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [400.644828] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [400.645019] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [400.645299] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [400.645522] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [400.645748] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.645944] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.646156] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [400.646403] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [400.648120] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [400.648626] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [400.648835] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [400.649628] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [400.649786] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [400.664343] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.665989] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [400.666089] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [400.666142] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.666409] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.666607] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.666794] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.666977] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.667242] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.667453] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.667784] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.668040] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.668328] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.668570] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.668807] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.669387] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.693871] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [400.694110] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [400.694397] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.694598] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.694773] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.694938] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [400.695124] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [400.695302] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [400.695534] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [400.695753] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [400.695958] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.696171] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.696390] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [400.696634] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [400.698103] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [400.698742] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [400.698956] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [400.699887] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [400.700034] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [400.714333] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.715974] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [400.716066] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [400.716127] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.716398] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.716666] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.716878] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.717109] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.717310] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.717578] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.717872] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.718202] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.718461] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.718711] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.718993] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.719621] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.732343] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [400.732629] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [400.733042] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.733400] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.733647] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.733870] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [400.734113] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [400.734359] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [400.734657] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [400.734946] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [400.735252] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [400.735579] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [400.735825] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [400.736151] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [400.747691] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.749464] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [400.749531] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:434] is removed <7> [400.749572] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.749862] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.750188] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.750456] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.750674] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.750834] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.751034] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.751322] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.751539] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.751754] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.751974] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.752192] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.752673] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.765187] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [400.765355] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [400.765604] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.765797] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.765975] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.766192] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [400.766369] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [400.766595] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [400.766946] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [400.767190] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.767350] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.767523] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.767684] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [400.767840] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [400.768005] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [400.768246] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [400.768452] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [400.768648] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.768835] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.769015] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [400.769306] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [400.780996] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.782389] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [400.782436] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [400.782466] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.782633] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.782855] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.783133] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.783371] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.783619] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.783748] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.783917] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.784094] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.784252] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.784403] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.784578] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.784943] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.798509] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [400.798656] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [400.798888] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.799094] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.799273] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.799436] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [400.799591] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [400.799796] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [400.800038] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [400.800284] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [400.800492] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.800687] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.800873] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [400.801118] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [400.814304] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.815974] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [400.816096] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:434] is removed <7> [400.816155] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.816483] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.816730] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.816919] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.817124] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.817292] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.817476] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.817761] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.817991] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.818244] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.818454] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.818689] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.819197] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.838100] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [400.838294] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [400.838549] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.838747] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.838934] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.839165] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [400.839368] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [400.839612] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [400.839888] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [400.840179] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [400.840447] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [400.840708] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [400.841017] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [400.841385] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [400.847664] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.849213] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [400.849281] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [400.849325] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.849581] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.849753] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.849903] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.850117] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.850296] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.850473] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.850691] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.850902] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.851112] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.851309] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.851525] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.852003] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.877914] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [400.878123] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [400.878355] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.878514] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.878662] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.878798] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [400.878952] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [400.879147] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [400.879340] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [400.879522] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [400.879692] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.879852] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.880008] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [400.880222] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [400.883093] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [400.883247] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [400.883370] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [400.883494] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [400.883596] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [400.897660] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.899246] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [400.899308] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [400.899350] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.899588] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.899813] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.900020] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.900300] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.900520] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.900713] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.900939] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.901181] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.901385] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.901579] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.901796] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.902354] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.926716] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [400.926935] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [400.927540] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.927733] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.927903] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.928248] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [400.928403] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [400.928580] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [400.928797] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [400.928998] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [400.929222] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.929407] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.929588] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [400.929810] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [400.947650] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.949272] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [400.949353] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [400.949401] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.949698] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.949925] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [400.950179] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.950385] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.950626] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [400.950882] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [400.951229] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [400.951505] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [400.951772] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.952018] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [400.952349] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [400.952917] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [400.978006] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [400.978213] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [400.978478] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [400.978672] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [400.978837] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [400.978994] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [400.979256] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [400.979427] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [400.979651] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [400.979857] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [400.980060] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.980249] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [400.980429] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [400.980657] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [400.982093] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [400.982605] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [400.982814] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [400.983912] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [400.984048] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [400.997649] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [400.999292] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [400.999368] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [400.999417] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [400.999711] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [400.999986] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [401.000256] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.000462] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.000697] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [401.000934] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [401.001267] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [401.001527] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [401.001769] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.002056] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [401.002281] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [401.002816] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <6> [401.015266] [IGT] kms_plane_scaling: finished subtest pipe-B, SUCCESS

<6> [398.121097] [IGT] kms_plane_scaling: starting dynamic subtest pipe-B

<7> [398.124688] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [398.126493] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [398.126880] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:270:pipe B] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [398.127223] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000

<7> [398.127549] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [398.127868] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:270:pipe B]

<7> [398.128192] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [398.128547] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [398.128833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [398.129102] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [398.129408] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)

<7> [398.129658] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [398.129898] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [398.130126] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)

<7> [398.130404] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)

<7> [398.130619] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)

<7> [398.130825] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)

<7> [398.131024] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)

<7> [398.131242] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)

<7> [398.131435] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [398.131628] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [398.131840] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [398.132023] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)

<7> [398.132257] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)

<7> [398.132422] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)

<7> [398.132584] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)

<7> [398.132746] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)

<7> [398.132899] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)

<7> [398.133047] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)

<7> [398.133215] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)

<7> [398.133358] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)

<7> [398.133497] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [398.133659] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [398.133816] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [398.133974] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)

<7> [398.134113] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)

<7> [398.134274] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)

<7> [398.134405] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [398.134533] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [398.134660] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [398.134782] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [398.134900] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)

<7> [398.135015] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)

<7> [398.135126] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 432000, found 0)

<7> [398.135263] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [398.135374] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.enable (expected no, found yes)

<7> [398.135482] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [398.135590] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1)

<7> [398.135692] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in lane_count (expected 0, found 4)

<7> [398.135794] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)

<7> [398.135895] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [398.136000] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [398.136099] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)

<7> [398.136212] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)

<7> [398.136311] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)

<7> [398.136409] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)

<7> [398.136510] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)

<7> [398.136613] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)

<7> [398.136710] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [398.136807] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [398.136896] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [398.136982] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)

<7> [398.137067] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)

<7> [398.137157] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)

<7> [398.137279] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)

<7> [398.137388] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)

<7> [398.137477] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)

<7> [398.137562] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)

<7> [398.137647] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)

<7> [398.137727] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)

<7> [398.137801] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [398.137878] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [398.137960] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [398.138041] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)

<7> [398.138137] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)

<7> [398.138171] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [398.138234] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)

<7> [398.138342] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [398.138318] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [398.138449] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [398.138452] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [398.138540] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [398.138632] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [398.138712] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)

<7> [398.138796] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)

<7> [398.138876] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in port_clock (expected 0, found 432000)

<7> [398.138960] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] fastset requirement not met, forcing full modeset

<7> [398.139046] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0

<7> [398.139154] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [398.139274] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x2

<7> [398.139352] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:270:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x1 -> 0x2

<7> [398.139418] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0

<7> [398.139479] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [398.139535] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:264:cursor B] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45

<7> [398.139589] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [398.139643] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [398.139702] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [398.139767] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [398.139856] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [398.139988] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [398.140110] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [398.140286] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [398.140438] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [398.140539] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [398.140647] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min cdclk: 309076 kHz -> 0 kHz

<7> [398.140737] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:270:pipe B] min cdclk: 0 kHz -> 309076 kHz

<7> [398.140832] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 77269 kHz -> 19318 kHz

<7> [398.140933] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:270:pipe B] allocated DPLL 0

<7> [398.141010] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:270:pipe B] reserving DPLL 0

<7> [398.141096] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [398.141180] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: no [modeset]

<7> [398.141294] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [398.141405] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [398.141498] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [398.141578] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [398.141658] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [398.141737] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [398.141815] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: yes [modeset]

<7> [398.141901] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [398.141983] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0

<7> [398.142061] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [398.142145] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [398.142253] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [398.142354] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [398.142449] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64

<7> [398.142525] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [398.142600] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled

<7> [398.142675] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [398.142755] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [398.142836] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0

<7> [398.142912] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [398.142988] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [398.143063] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [398.143142] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [398.143240] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [398.143349] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [398.143453] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [398.143538] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [398.143616] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [398.143693] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97

<7> [398.143771] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906

<7> [398.143846] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [398.143922] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [398.143997] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [398.144071] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [398.144157] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [398.144270] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [398.144382] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 309076, min voltage level 0

<7> [398.144469] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0

<7> [398.144543] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x40, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [398.144624] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0

<7> [398.144702] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [398.144782] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [398.144862] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [398.144936] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [398.145008] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no,

<7> [398.145085] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.

<7> [398.145179] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [398.145288] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [398.145387] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [398.145473] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [398.145545] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [398.145616] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [398.145694] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [398.145774] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [398.145854] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [398.145931] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [398.146002] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [398.146077] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [398.146156] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [398.146250] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [398.146346] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [398.146444] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [398.146542] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [398.146639] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [398.146719] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [398.146798] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:154:plane 1B] fb: [FB:432] 2880x1800 format = RG16 little-endian (0x36314752) modifier = 0x0, visible: yes

<7> [398.146874] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0

<7> [398.146949] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2160x1350+0+0

<7> [398.147041] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:184:plane 2B] fb: [NOFB], visible: no

<7> [398.147121] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:214:plane 3B] fb: [NOFB], visible: no

<7> [398.147258] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:244:plane 4B] fb: [NOFB], visible: no

<7> [398.147354] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:254:plane 5B] fb: [NOFB], visible: no

<7> [398.147446] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:264:cursor B] fb: [NOFB], visible: no

<7> [398.148957] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [398.149079] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [398.149232] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [398.149417] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [398.149581] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000)

<7> [398.149737] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [398.149828] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [398.355430] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0

<7> [398.355872] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [398.369490] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off

<7> [398.369781] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [398.370047] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [398.422706] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [398.423017] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short

<7> [398.431224] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [398.431550] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]

<7> [398.431597] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]

<7> [398.432921] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [398.433299] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [398.433653] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A]

<7> [398.433921] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1]

<7> [398.434159] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A]

<7> [398.434374] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B]

<7> [398.434569] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C]

<7> [398.434796] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2]

<7> [398.434997] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A]

<7> [398.435205] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B]

<7> [398.435398] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C]

<7> [398.435634] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3]

<7> [398.435837] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A]

<7> [398.436045] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B]

<7> [398.436261] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C]

<7> [398.436446] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:402:DP-1]

<7> [398.436636] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:414:DP-2]

<7> [398.436848] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:422:DP-3]

<7> [398.437102] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 6 (mbus joined: yes)

<7> [398.437372] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [398.438865] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:270:pipe B]

<7> [398.439114] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [398.441386] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on

<7> [398.441609] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (490 ms remaining)

<7> [398.457589] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [398.457912] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long

<7> [398.458228] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [398.458598] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]

<7> [398.939846] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [399.027310] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [399.027638] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on

<7> [399.027915] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063

<7> [399.064554] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [399.064916] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long

<7> [399.065271] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20

<7> [399.065640] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]

<7> [399.235314] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [399.235754] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on

<7> [399.236152] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b

<7> [399.238240] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [399.239777] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [399.240590] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05

<7> [399.241692] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [399.243066] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [399.244199] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK

<7> [399.244547] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4

<7> [399.246149] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [399.246574] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4

<7> [399.247350] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe B

<7> [399.247826] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [399.248205] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe B

<7> [399.248592] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 4518

<7> [399.264684] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A

<7> [399.265279] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000)

<7> [399.265862] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]

<7> [399.266425] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [399.268207] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]

<7> [399.268612] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:270:pipe B]

<7> [399.272530] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe B

<7> [399.272906] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [399.273007] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [399.273120] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [399.273467] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [399.273747] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.274021] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.274358] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.274623] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.274991] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [399.275408] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [399.275779] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [399.276133] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.276463] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.276768] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [399.277616] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [399.282692] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [399.282915] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [399.283243] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [399.283495] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.283689] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.283857] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [399.284019] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [399.284227] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [399.284558] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [399.284722] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [399.284862] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.284996] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.285143] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [399.285286] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [399.285436] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [399.285629] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [399.285810] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [399.285987] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [399.286171] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [399.286335] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [399.286556] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 19318 kHz -> 38635 kHz

<7> [399.286722] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [399.297907] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [399.299271] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [399.299310] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:434] is removed

<7> [399.299340] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [399.299473] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [399.299578] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.299697] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.299894] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.300131] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.300352] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [399.300603] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [399.300743] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [399.300881] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.301014] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.301160] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [399.301505] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [399.315816] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [399.315994] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [399.316318] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [399.316581] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.316778] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.316954] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [399.317216] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [399.317425] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [399.317673] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [399.317905] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [399.318128] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [399.318346] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [399.318576] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [399.318874] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [399.331215] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [399.332848] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [399.332948] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [399.333015] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [399.333501] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [399.333810] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.333998] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.334200] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.334370] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.334588] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [399.334837] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [399.335063] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [399.335307] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.335519] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.335718] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [399.336247] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [399.349555] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [399.349763] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [399.350061] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [399.350407] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.350622] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.350855] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [399.351114] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [399.351387] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [399.351710] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400

<7> [399.352127] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400

<7> [399.352477] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [399.352774] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [399.353033] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193

<7> [399.353387] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 38635 kHz -> 77269 kHz

<7> [399.353727] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [399.364558] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [399.366280] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [399.366363] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:434] is removed

<7> [399.366416] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [399.366706] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [399.366945] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.367183] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.367377] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.367577] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.367790] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [399.368051] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [399.368349] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [399.368602] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.368835] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.369064] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [399.369634] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [399.388103] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [399.388275] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [399.388500] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [399.388656] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.388794] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.388927] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [399.389052] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [399.389230] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [399.389438] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [399.389637] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [399.389799] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [399.389964] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [399.390136] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [399.390343] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [399.397897] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [399.399482] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [399.399540] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [399.399578] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [399.399820] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [399.400022] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.400261] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.400470] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.400676] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.400851] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [399.401072] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [399.401325] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [399.401531] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.401729] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.401946] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [399.402426] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [399.421039] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [399.421302] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [399.421585] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B]

<7> [399.421854] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408

<7> [399.422053] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643

<7> [399.422299] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.422502] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.422703] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [399.422935] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [399.423151] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.423333] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.423531] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [399.423698] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [399.423891] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2

<7> [399.424152] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1948 qgv_peak_bw: 38400

<7> [399.424406] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1948 qgv_peak_bw: 38400

<7> [399.424656] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1948 qgv_peak_bw: 38400

<7> [399.424884] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1948 qgv_peak_bw: 38400

<7> [399.425106] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1948

<7> [399.425373] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [399.431178] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [399.432423] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [399.432457] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [399.432489] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [399.432620] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 1408) -> ( 0 - 0), size 1408 -> 0

<7> [399.432770] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1408 - 4051) -> ( 0 - 0), size 2643 -> 0

<7> [399.432961] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.433206] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.433406] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.433620] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.433704] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.433786] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.433869] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.433947] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.434036] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [399.434176] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [399.434293] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [399.434404] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.434516] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.434644] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [399.434942] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [399.457673] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [399.457891] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [399.458165] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B]

<7> [399.458443] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456

<7> [399.458654] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595

<7> [399.458837] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.459027] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.459233] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [399.459400] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [399.459593] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.459784] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.459952] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [399.460110] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [399.460280] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2

<7> [399.460499] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3895 qgv_peak_bw: 38400

<7> [399.460717] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3895 qgv_peak_bw: 38400

<7> [399.460917] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3895 qgv_peak_bw: 38400

<7> [399.461127] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3895 qgv_peak_bw: 38400

<7> [399.461330] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3895

<7> [399.461594] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [399.481244] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [399.482834] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [399.482902] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [399.482956] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [399.483238] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 1456) -> ( 0 - 0), size 1456 -> 0

<7> [399.483439] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1456 - 4051) -> ( 0 - 0), size 2595 -> 0

<7> [399.483631] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.483816] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.483990] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.484226] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.484388] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.484544] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.484695] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.484844] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.485007] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [399.485260] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [399.485495] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [399.485711] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.485920] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.486154] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [399.486669] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [399.507116] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [399.507244] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [399.507446] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [399.507616] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.507780] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.507915] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [399.508067] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [399.508306] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [399.508525] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [399.508737] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [399.508943] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [399.509152] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [399.509347] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [399.509594] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [399.514602] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [399.516047] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [399.516157] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [399.516206] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [399.516482] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [399.516652] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.516757] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.516860] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.516957] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.517064] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [399.517232] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [399.517370] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [399.517503] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.517636] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.517760] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [399.518101] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [399.540938] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [399.541146] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [399.541411] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [399.541568] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.541704] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.541833] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [399.541958] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [399.542119] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [399.542298] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [399.542482] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [399.542659] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [399.542820] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [399.542973] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [399.543206] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [399.547926] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [399.549222] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [399.549267] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [399.549296] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [399.549453] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [399.549570] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.549681] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.549789] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.549894] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.550006] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [399.550191] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [399.550354] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [399.550509] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.550656] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.550759] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [399.551034] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [399.573417] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [399.573555] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [399.573745] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [399.573893] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.574033] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.574199] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [399.574335] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [399.574507] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [399.574764] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [399.574899] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [399.575012] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.575143] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.575252] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [399.575360] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [399.575487] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [399.575658] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [399.575818] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [399.575976] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [399.576137] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [399.576301] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [399.576484] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [399.581201] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [399.582417] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [399.582453] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [399.582481] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [399.582606] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [399.582738] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.582930] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.583190] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.583381] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.583588] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [399.583733] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [399.583839] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [399.583941] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.584040] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.584156] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [399.584434] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [399.613310] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [399.613410] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [399.613570] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [399.613648] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.613717] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.613783] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [399.613847] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [399.613919] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [399.614012] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400

<7> [399.614115] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400

<7> [399.614216] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [399.614338] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [399.614443] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193

<7> [399.614567] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [399.615239] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [399.615741] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [399.615907] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [399.619433] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [399.619550] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [399.631170] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [399.632481] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [399.632524] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [399.632554] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [399.632727] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [399.632980] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.633273] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.633528] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.633682] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.633783] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [399.633935] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [399.634062] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [399.634205] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.634326] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.634448] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [399.634760] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [399.648826] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [399.649019] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [399.649321] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [399.649496] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.649656] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.649815] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [399.649965] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [399.650181] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [399.650409] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [399.650619] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [399.650818] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [399.651035] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [399.651252] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [399.651485] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [399.664469] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [399.665837] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [399.665901] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:434] is removed

<7> [399.665938] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [399.666220] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [399.666429] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.666623] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.666770] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.666925] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.667097] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [399.667308] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [399.667489] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [399.667667] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.667834] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.668022] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [399.668510] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [399.682258] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [399.682443] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [399.682729] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [399.682936] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.683179] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.683387] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [399.683629] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [399.683862] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [399.684170] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [399.684421] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [399.684673] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [399.685012] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [399.685442] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [399.685802] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [399.697851] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [399.699430] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [399.699492] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [399.699533] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [399.699821] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [399.700077] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.700382] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.700621] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.700792] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.701008] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [399.701287] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [399.701518] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [399.701738] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.701949] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.702215] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [399.702699] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [399.715467] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [399.715657] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [399.715890] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [399.716070] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.716300] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.716484] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [399.716663] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [399.716845] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [399.717113] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [399.717354] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [399.717587] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [399.717809] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [399.718057] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [399.718346] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [399.731165] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [399.732723] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [399.732810] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:434] is removed

<7> [399.732865] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [399.733227] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [399.733483] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.733685] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.733865] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.734029] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.734296] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [399.734543] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [399.734773] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [399.735034] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.735277] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.735485] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [399.735987] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [399.749437] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [399.749643] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [399.749982] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [399.750331] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.750559] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.750776] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [399.751019] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [399.751315] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [399.751630] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400

<7> [399.751929] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400

<7> [399.752231] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [399.752500] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [399.752790] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193

<7> [399.753132] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [399.764496] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [399.766165] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [399.766243] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [399.766291] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [399.766570] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [399.766791] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.766999] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.767245] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.767442] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.767705] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [399.767988] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [399.768281] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [399.768533] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.768792] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.769026] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [399.769608] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [399.788071] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [399.788242] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [399.788472] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [399.788651] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.788790] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.788915] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [399.789034] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [399.789197] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [399.789371] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [399.789537] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [399.789717] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [399.789872] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [399.790029] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [399.790242] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [399.797828] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [399.799408] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [399.799468] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [399.799507] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [399.799739] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [399.799985] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.800239] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.800445] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.800638] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.800810] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [399.801043] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [399.801295] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [399.801507] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.801721] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.801918] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [399.802384] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [399.820994] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [399.821274] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [399.821594] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B]

<7> [399.821914] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408

<7> [399.822226] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643

<7> [399.822449] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.822681] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.822880] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [399.823094] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [399.823304] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.823494] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.823673] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [399.823843] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [399.824045] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2

<7> [399.824347] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1948 qgv_peak_bw: 38400

<7> [399.824596] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1948 qgv_peak_bw: 38400

<7> [399.824829] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1948 qgv_peak_bw: 38400

<7> [399.825049] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1948 qgv_peak_bw: 38400

<7> [399.825287] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1948

<7> [399.825589] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [399.831133] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [399.832399] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [399.832435] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [399.832466] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [399.832609] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 1408) -> ( 0 - 0), size 1408 -> 0

<7> [399.832789] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1408 - 4051) -> ( 0 - 0), size 2643 -> 0

<7> [399.832995] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.833246] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.833460] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.833618] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.833718] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.833812] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.833899] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.833986] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.834075] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [399.834217] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [399.834338] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [399.834453] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.834567] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.834684] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [399.834976] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [399.857423] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [399.857635] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [399.857948] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [399.858242] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B]

<7> [399.858499] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456

<7> [399.858691] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595

<7> [399.858861] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.859020] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.859213] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [399.859390] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [399.859539] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.859686] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.859839] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [399.859995] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [399.860211] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2

<7> [399.860508] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [399.860660] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B]

<7> [399.860820] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456

<7> [399.860948] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595

<7> [399.861088] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.861210] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.861340] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [399.861460] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [399.861571] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.861680] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.861787] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [399.861888] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [399.861996] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2

<7> [399.862178] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3895 qgv_peak_bw: 38400

<7> [399.862345] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3895 qgv_peak_bw: 38400

<7> [399.862517] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3895 qgv_peak_bw: 38400

<7> [399.862675] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3895 qgv_peak_bw: 38400

<7> [399.862848] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3895

<7> [399.863056] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [399.866110] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [399.866632] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [399.866765] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [399.867569] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [399.867682] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [399.881137] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [399.882525] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [399.882570] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [399.882615] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [399.882923] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 1456) -> ( 0 - 0), size 1456 -> 0

<7> [399.883269] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1456 - 4051) -> ( 0 - 0), size 2595 -> 0

<7> [399.883534] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.883692] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.883806] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.883928] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.884030] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.884158] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.884260] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.884355] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.884466] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [399.884625] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [399.884775] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [399.884918] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.885056] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.885211] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [399.885556] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [399.908380] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [399.908569] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [399.908837] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [399.909025] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.909276] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.909462] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [399.909631] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [399.909823] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [399.910053] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [399.910306] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [399.910516] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [399.910723] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [399.910922] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [399.911207] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [399.914467] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [399.915810] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [399.915881] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [399.915925] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [399.916221] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [399.916429] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.916574] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.916654] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.916732] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.916827] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [399.916957] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [399.917087] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [399.917199] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.917307] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.917411] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [399.917686] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [399.940098] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [399.940246] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [399.940468] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [399.940655] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.940806] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.940943] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [399.941104] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [399.941253] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [399.941446] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [399.941627] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [399.941799] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [399.941966] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [399.942138] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [399.942336] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [399.947863] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [399.949261] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [399.949326] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [399.949368] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [399.949611] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [399.949720] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.949819] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.949914] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.950015] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.950160] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [399.950302] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [399.950438] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [399.950571] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.950692] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.950803] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [399.951097] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [399.975003] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [399.975200] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [399.975465] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [399.975637] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [399.975785] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [399.975923] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [399.976054] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [399.976268] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [399.976458] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [399.976645] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [399.976820] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [399.976990] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [399.977168] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [399.977382] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [399.981204] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [399.982425] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [399.982466] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [399.982492] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [399.982604] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [399.982780] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [399.982973] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.983226] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.983416] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [399.983615] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [399.983726] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [399.983825] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [399.983923] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.984015] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [399.984118] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [399.984391] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.013523] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [400.013617] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [400.013755] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.013827] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.013895] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.013960] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [400.014024] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [400.014116] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [400.014231] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400

<7> [400.014348] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400

<7> [400.014450] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [400.014536] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [400.014623] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193

<7> [400.014737] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [400.015217] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [400.015726] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [400.015873] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [400.020446] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [400.020559] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [400.031234] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.032523] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [400.032565] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [400.032595] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.032784] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.033065] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.033415] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.033641] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.033724] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.033817] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.033943] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.034060] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.034200] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.034312] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.034419] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.034709] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.048641] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [400.048851] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [400.049145] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.049330] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.049495] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.049653] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [400.049804] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [400.049999] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [400.050244] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [400.050456] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [400.050651] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [400.050838] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [400.051019] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [400.051286] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [400.064431] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.066000] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [400.066134] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:434] is removed

<7> [400.066202] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.066552] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.066747] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.066921] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.067075] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.067244] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.067418] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.067637] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.067861] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.068104] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.068327] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.068567] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.069132] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.082308] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [400.082528] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [400.082894] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.083226] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.083487] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.083741] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [400.083978] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [400.084290] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [400.084676] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [400.084971] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [400.085294] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.085632] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.085895] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [400.086249] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [400.097783] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.099422] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [400.099483] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [400.099526] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.099824] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.100162] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.100416] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.100656] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.100820] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.100991] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.101262] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.101492] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.101708] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.101915] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.102123] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.102584] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.115413] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [400.115607] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [400.115887] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.116157] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.116342] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.116521] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [400.116694] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [400.116894] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [400.117169] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [400.117421] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [400.117703] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.117933] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.118167] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [400.118458] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [400.131122] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.132744] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [400.132818] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:434] is removed

<7> [400.132866] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.133207] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.133428] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.133628] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.133795] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.133957] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.134195] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.134432] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.134687] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.134906] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.135155] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.135362] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.135865] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.149384] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [400.149586] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [400.149901] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.150183] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.150408] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.150640] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [400.150846] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [400.151081] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [400.151487] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [400.151693] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.151866] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.152033] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.152251] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [400.152407] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [400.152600] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [400.152857] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400

<7> [400.153098] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400

<7> [400.153324] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [400.153550] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [400.153761] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193

<7> [400.154039] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [400.164426] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.165903] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [400.165986] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [400.166040] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.166380] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.166597] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.166718] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.166834] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.166951] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.167098] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.167264] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.167421] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.167577] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.167726] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.167889] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.168264] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.187542] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [400.187681] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [400.187877] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.188010] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.188161] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.188292] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [400.188428] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [400.188577] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [400.188749] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [400.188905] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [400.189051] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [400.189212] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [400.189350] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [400.189529] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [400.197773] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.199310] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [400.199370] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [400.199410] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.199635] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.199900] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.200147] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.200350] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.200541] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.200745] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.200975] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.201228] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.201445] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.201652] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.201892] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.202401] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.221219] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [400.221466] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [400.221751] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B]

<7> [400.222096] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408

<7> [400.222311] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643

<7> [400.222506] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.222729] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.222907] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [400.223089] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [400.223282] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.223449] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.223613] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [400.223771] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [400.223950] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2

<7> [400.224228] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1948 qgv_peak_bw: 38400

<7> [400.224446] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1948 qgv_peak_bw: 38400

<7> [400.224654] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1948 qgv_peak_bw: 38400

<7> [400.224850] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1948 qgv_peak_bw: 38400

<7> [400.225044] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1948

<7> [400.225365] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [400.231090] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.232361] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [400.232397] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [400.232429] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.232563] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 1408) -> ( 0 - 0), size 1408 -> 0

<7> [400.232695] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1408 - 4051) -> ( 0 - 0), size 2643 -> 0

<7> [400.232888] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.233133] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.233329] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.233524] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.233643] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.233728] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.233812] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.233893] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.233986] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.234130] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.234254] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.234395] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.234527] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.234644] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.234940] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.257472] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [400.257712] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [400.257964] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B]

<7> [400.258274] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456

<7> [400.258475] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595

<7> [400.258659] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.258834] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.258999] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [400.259218] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [400.259374] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.259525] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.259673] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [400.259819] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [400.259991] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2

<7> [400.260230] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3895 qgv_peak_bw: 38400

<7> [400.260445] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3895 qgv_peak_bw: 38400

<7> [400.260656] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3895 qgv_peak_bw: 38400

<7> [400.260860] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3895 qgv_peak_bw: 38400

<7> [400.261052] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3895

<7> [400.261321] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [400.265105] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [400.265473] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [400.265658] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [400.265788] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [400.265908] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [400.281110] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.282790] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [400.282875] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [400.282944] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.283296] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 1456) -> ( 0 - 0), size 1456 -> 0

<7> [400.283520] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1456 - 4051) -> ( 0 - 0), size 2595 -> 0

<7> [400.283740] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.283944] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.284187] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.284404] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.284613] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.284796] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.284977] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.285214] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.285422] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.285698] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.285957] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.286239] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.286474] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.286751] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.287381] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.308316] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [400.308481] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [400.308714] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.308881] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.309027] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.309208] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [400.309341] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [400.309512] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [400.309719] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [400.309894] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [400.310067] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.310232] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.310387] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [400.310581] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [400.314401] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.315650] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [400.315728] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [400.315777] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.316035] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.316341] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.316538] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.316681] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.316756] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.316829] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.316926] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.317020] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.317132] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.317243] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.317352] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.317589] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.339880] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [400.340031] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [400.340304] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.340481] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.340653] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.340789] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [400.340921] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [400.341095] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [400.341299] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [400.341484] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [400.341660] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.341826] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.341984] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [400.342203] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [400.347812] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.349240] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [400.349309] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [400.349352] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.349612] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.349724] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.349814] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.349901] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.349984] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.350093] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.350220] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.350340] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.350457] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.350573] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.350687] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.350966] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.374283] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [400.374470] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [400.374747] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.374933] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.375139] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.375287] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [400.375426] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [400.375583] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [400.375771] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [400.375948] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [400.376138] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.376304] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.376472] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [400.376683] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [400.381149] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.382379] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [400.382417] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [400.382444] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.382571] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.382662] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.382853] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.383057] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.383363] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.383596] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.383765] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.383869] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.383968] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.384078] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.384189] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.384467] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.414370] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [400.414469] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [400.414606] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.414683] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.414752] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.414814] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [400.414874] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [400.414943] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [400.415031] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400

<7> [400.415101] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [400.415144] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400

<7> [400.415258] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [400.415263] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [400.415375] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [400.415388] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [400.415471] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193

<7> [400.415600] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [400.421020] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [400.421222] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [400.431071] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.432333] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [400.432367] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [400.432395] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.432518] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.432603] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.432777] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.432995] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.433332] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.433555] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.433720] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.433831] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.433938] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.434042] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.434162] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.434438] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.448624] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [400.448849] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [400.449099] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.449294] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.449460] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.449608] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [400.449744] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [400.449900] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [400.450198] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [400.450340] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.450462] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.450582] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.450700] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [400.450832] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [400.450968] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [400.451164] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [400.451336] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [400.451498] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [400.451655] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [400.451807] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [400.452000] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [400.464364] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.465907] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [400.465980] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:434] is removed

<7> [400.466033] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.466382] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.466590] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.466713] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.466828] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.466937] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.467101] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.467283] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.467442] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.467599] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.467748] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.467892] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.468281] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.481986] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [400.482173] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [400.482413] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.482581] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.482735] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.482891] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [400.483042] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [400.483282] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [400.483511] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [400.483729] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [400.483932] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.484147] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.484345] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [400.484602] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [400.497730] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.499266] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [400.499329] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [400.499373] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.499612] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.499847] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.500107] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.500331] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.500597] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.500805] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.501051] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.501334] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.501578] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.501799] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.502016] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.502576] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.515363] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [400.515545] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [400.515800] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.515994] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.516235] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.516432] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [400.516663] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [400.516880] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [400.517175] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [400.517428] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [400.517676] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.517919] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.518221] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [400.518502] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [400.531053] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.532768] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [400.532848] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:434] is removed

<7> [400.532898] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.533238] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.533479] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.533686] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.533869] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.534100] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.534312] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.534574] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.534815] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.535038] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.535290] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.535496] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.536011] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.554732] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [400.554950] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [400.555289] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.555505] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.555703] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.555894] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [400.556110] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [400.556319] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [400.556598] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [400.556859] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [400.557125] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [400.557376] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [400.557624] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [400.557924] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [400.564336] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.565767] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [400.565833] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [400.565875] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.566141] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.566334] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.566525] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.566682] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.566840] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.567013] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.567234] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.567430] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.567620] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.567799] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.567977] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.568466] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.593669] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [400.593863] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [400.594154] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.594333] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.594497] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.594650] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [400.594789] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [400.594947] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [400.595185] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [400.595369] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [400.595556] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.595732] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.595896] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [400.596116] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [400.598096] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [400.598736] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [400.598916] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [400.599347] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [400.599477] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [400.614343] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.616000] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [400.616103] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [400.616160] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.616446] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.616673] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.616841] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.617002] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.617226] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.617399] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.617614] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.617819] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.618023] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.618236] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.618422] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.618888] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.643624] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [400.643832] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [400.644110] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.644304] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.644482] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.644649] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [400.644828] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [400.645019] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [400.645299] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [400.645522] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [400.645748] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.645944] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.646156] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [400.646403] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [400.648120] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [400.648626] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [400.648835] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [400.649628] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [400.649786] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [400.664343] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.665989] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [400.666089] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [400.666142] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.666409] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.666607] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.666794] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.666977] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.667242] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.667453] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.667784] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.668040] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.668328] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.668570] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.668807] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.669387] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.693871] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [400.694110] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [400.694397] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.694598] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.694773] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.694938] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [400.695124] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [400.695302] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [400.695534] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [400.695753] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [400.695958] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.696171] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.696390] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [400.696634] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [400.698103] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [400.698742] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [400.698956] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [400.699887] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [400.700034] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [400.714333] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.715974] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [400.716066] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [400.716127] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.716398] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.716666] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.716878] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.717109] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.717310] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.717578] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.717872] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.718202] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.718461] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.718711] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.718993] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.719621] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.732343] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [400.732629] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [400.733042] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.733400] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.733647] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.733870] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [400.734113] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [400.734359] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [400.734657] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [400.734946] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [400.735252] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [400.735579] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [400.735825] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [400.736151] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [400.747691] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.749464] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [400.749531] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:434] is removed

<7> [400.749572] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.749862] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.750188] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.750456] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.750674] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.750834] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.751034] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.751322] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.751539] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.751754] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.751974] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.752192] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.752673] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.765187] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [400.765355] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [400.765604] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.765797] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.765975] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.766192] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [400.766369] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [400.766595] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [400.766946] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [400.767190] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.767350] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.767523] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.767684] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [400.767840] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [400.768005] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [400.768246] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [400.768452] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [400.768648] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.768835] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.769015] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [400.769306] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [400.780996] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.782389] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [400.782436] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [400.782466] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.782633] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.782855] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.783133] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.783371] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.783619] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.783748] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.783917] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.784094] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.784252] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.784403] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.784578] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.784943] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.798509] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [400.798656] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [400.798888] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.799094] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.799273] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.799436] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [400.799591] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [400.799796] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [400.800038] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [400.800284] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [400.800492] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.800687] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.800873] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [400.801118] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [400.814304] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.815974] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [400.816096] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:434] is removed

<7> [400.816155] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.816483] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.816730] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.816919] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.817124] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.817292] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.817476] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.817761] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.817991] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.818244] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.818454] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.818689] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.819197] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.838100] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [400.838294] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [400.838549] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.838747] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.838934] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.839165] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [400.839368] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [400.839612] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [400.839888] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [400.840179] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [400.840447] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [400.840708] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [400.841017] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [400.841385] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [400.847664] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.849213] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [400.849281] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [400.849325] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.849581] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.849753] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.849903] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.850117] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.850296] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.850473] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.850691] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.850902] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.851112] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.851309] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.851525] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.852003] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.877914] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [400.878123] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [400.878355] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.878514] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.878662] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.878798] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [400.878952] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [400.879147] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [400.879340] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [400.879522] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [400.879692] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.879852] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.880008] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [400.880222] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [400.883093] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [400.883247] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [400.883370] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [400.883494] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [400.883596] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [400.897660] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.899246] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [400.899308] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [400.899350] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.899588] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.899813] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.900020] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.900300] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.900520] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.900713] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.900939] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.901181] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.901385] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.901579] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.901796] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.902354] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.926716] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [400.926935] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [400.927540] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.927733] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.927903] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.928248] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [400.928403] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [400.928580] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [400.928797] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [400.928998] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [400.929222] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.929407] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.929588] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [400.929810] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [400.947650] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.949272] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [400.949353] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [400.949401] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.949698] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.949925] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [400.950179] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.950385] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.950626] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [400.950882] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [400.951229] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [400.951505] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [400.951772] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.952018] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [400.952349] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [400.952917] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [400.978006] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [400.978213] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [400.978478] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [400.978672] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [400.978837] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [400.978994] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [400.979256] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [400.979427] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [400.979651] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [400.979857] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [400.980060] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.980249] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [400.980429] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [400.980657] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [400.982093] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [400.982605] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [400.982814] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [400.983912] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [400.984048] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [400.997649] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [400.999292] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [400.999368] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [400.999417] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [400.999711] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [400.999986] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [401.000256] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.000462] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.000697] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [401.000934] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [401.001267] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [401.001527] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [401.001769] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.002056] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [401.002281] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [401.002816] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<6> [401.015266] [IGT] kms_plane_scaling: finished subtest pipe-B, SUCCESS

Results for igt@kms_plane_scaling@plane-downscale-factor-0-75-with-pixel-format@pipe-b