igt@kms_plane_scaling@plane-downscale-factor-0-75-with-pixel-format@pipe-b on shard-lnl@xe-4912-7f72587254d9c0142ac57eb050acd8f817585623 Test details

Detail	Value
Duration	2.93 seconds
Hostname	shard-lnl-4
Igt-Version	IGT-Version: 2.4-g63a08403d (x86_64) (Linux: 7.0.0-lgci-xe-xe-4912-7f72587254d9c0142-debug+ x86_64)
Out	Starting dynamic subtest: pipe-B Trying on eDP-1 Dynamic subtest pipe-B: SUCCESS (2.929s)
Err	Starting dynamic subtest: pipe-B Dynamic subtest pipe-B: SUCCESS (2.929s)
Dmesg	<6> [373.411208] [IGT] kms_plane_scaling: starting dynamic subtest pipe-B <7> [373.415675] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [373.417836] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [373.418209] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:270:pipe B] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [373.418573] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000 <7> [373.418838] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [373.419096] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:270:pipe B] <7> [373.419356] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [373.419588] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [373.419812] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [373.420027] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [373.420234] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0) <7> [373.420444] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [373.420640] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [373.420834] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0) <7> [373.421024] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0) <7> [373.421201] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0) <7> [373.421386] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0) <7> [373.421559] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0) <7> [373.421724] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0) <7> [373.421890] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [373.422050] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [373.422207] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [373.422369] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0) <7> [373.422521] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0) <7> [373.422669] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0) <7> [373.422814] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0) <7> [373.422958] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0) <7> [373.423098] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0) <7> [373.423235] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0) <7> [373.423406] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0) <7> [373.423537] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0) <7> [373.423667] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [373.423797] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [373.423927] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [373.424049] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0) <7> [373.424172] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0) <7> [373.424302] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0) <7> [373.424419] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [373.424532] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [373.424645] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [373.424761] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [373.424872] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0) <7> [373.424978] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0) <7> [373.425081] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 432000, found 0) <7> [373.425186] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [373.425299] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.enable (expected no, found yes) <7> [373.425304] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [373.425404] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [373.425434] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [373.425507] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1) <7> [373.425537] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [373.425609] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in lane_count (expected 0, found 4) <7> [373.425712] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288) <7> [373.425816] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [373.425919] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [373.426021] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880) <7> [373.426124] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040) <7> [373.426228] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880) <7> [373.426339] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040) <7> [373.426446] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928) <7> [373.426550] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960) <7> [373.426655] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [373.426760] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [373.426866] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [373.426970] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809) <7> [373.427073] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906) <7> [373.427176] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906) <7> [373.427286] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880) <7> [373.427390] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040) <7> [373.427492] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880) <7> [373.427595] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040) <7> [373.427698] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928) <7> [373.427803] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960) <7> [373.427907] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [373.428012] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [373.428116] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [373.428220] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809) <7> [373.428354] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906) <7> [373.428458] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906) <7> [373.428561] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [373.428663] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [373.428765] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [373.428869] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [373.428973] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710) <7> [373.429077] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710) <7> [373.429181] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in port_clock (expected 0, found 432000) <7> [373.429294] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] fastset requirement not met, forcing full modeset <7> [373.429402] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0 <7> [373.429534] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [373.429662] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x2 <7> [373.429746] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:270:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x1 -> 0x2 <7> [373.429828] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0 <7> [373.429902] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [373.429974] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:264:cursor B] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7> [373.430043] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [373.430112] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [373.430181] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [373.430249] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [373.430350] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [373.430474] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [373.430592] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [373.430709] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [373.430823] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [373.430936] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [373.431081] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min cdclk: 309076 kHz -> 0 kHz <7> [373.431197] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:270:pipe B] min cdclk: 0 kHz -> 309076 kHz <7> [373.431347] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 77269 kHz -> 19318 kHz <7> [373.431504] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:270:pipe B] allocated DPLL 0 <7> [373.431609] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:270:pipe B] reserving DPLL 0 <7> [373.431712] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [373.431795] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: no [modeset] <7> [373.431914] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [373.432026] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [373.432138] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [373.432251] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [373.432372] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [373.432486] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [373.432596] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: yes [modeset] <7> [373.432707] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [373.432818] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0 <7> [373.432928] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [373.433038] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [373.433149] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [373.433260] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [373.433384] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7> [373.433495] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [373.433603] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7> [373.433712] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [373.433821] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [373.433932] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7> [373.434041] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [373.434152] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [373.434260] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [373.434377] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [373.434486] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [373.434594] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [373.434703] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [373.434813] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [373.434922] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [373.435030] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7> [373.435139] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7> [373.435248] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [373.435364] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [373.435476] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [373.435585] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [373.435696] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [373.435805] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [373.435913] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 309076, min voltage level 0 <7> [373.436021] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7> [373.436128] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x40, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [373.436236] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0 <7> [373.436352] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [373.436462] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [373.436572] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [373.436681] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [373.436789] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no, <7> [373.436896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7> [373.437004] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [373.437110] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [373.437221] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [373.437336] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [373.437447] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [373.437555] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [373.437663] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [373.437770] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [373.437878] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [373.437987] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [373.438097] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [373.438205] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [373.438320] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [373.438430] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [373.438536] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [373.438643] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [373.438750] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [373.438860] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [373.438968] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [373.439077] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:154:plane 1B] fb: [FB:432] 2880x1800 format = RG16 little-endian (0x36314752) modifier = 0x0, visible: yes <7> [373.439187] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0 <7> [373.439301] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2160x1350+0+0 <7> [373.439412] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:184:plane 2B] fb: [NOFB], visible: no <7> [373.439518] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:214:plane 3B] fb: [NOFB], visible: no <7> [373.439628] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:244:plane 4B] fb: [NOFB], visible: no <7> [373.439737] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:254:plane 5B] fb: [NOFB], visible: no <7> [373.439846] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:264:cursor B] fb: [NOFB], visible: no <7> [373.441432] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [373.441558] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [373.441724] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [373.441853] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [373.442034] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000) <7> [373.442298] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [373.442429] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [373.646174] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0 <7> [373.647483] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [373.659387] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off <7> [373.659836] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time <7> [373.659793] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [373.660268] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [373.660413] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short <7> [373.712468] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [373.712862] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short <7> [373.720917] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [373.721215] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A] <7> [373.721289] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A] <7> [373.721945] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A] <7> [373.722683] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [373.723128] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [373.723537] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A] <7> [373.723810] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1] <7> [373.724094] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A] <7> [373.724355] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B] <7> [373.724612] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C] <7> [373.724887] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2] <7> [373.725144] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A] <7> [373.725399] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B] <7> [373.725650] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C] <7> [373.725920] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3] <7> [373.726176] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A] <7> [373.726434] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B] <7> [373.726691] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C] <7> [373.726962] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:402:DP-1] <7> [373.727221] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:414:DP-2] <7> [373.727477] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:422:DP-3] <7> [373.727795] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 6 (mbus joined: yes) <7> [373.728108] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [373.729663] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:270:pipe B] <7> [373.729952] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [373.732255] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on <7> [373.732496] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (489 ms remaining) <7> [373.749725] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [373.750265] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long <7> [373.750769] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [373.751299] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A] <7> [374.229485] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [374.317224] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [374.317594] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on <7> [374.317962] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7> [374.354095] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [374.354525] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long <7> [374.354926] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7> [374.355516] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A] <7> [374.526257] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [374.526976] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on <7> [374.527473] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7> [374.530002] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [374.531716] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [374.532698] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7> [374.534110] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [374.535692] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [374.537003] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK <7> [374.537422] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7> [374.539036] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [374.539453] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7> [374.540344] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe B <7> [374.540972] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [374.541403] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe B <7> [374.541967] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 13892 <7> [374.557850] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [374.558410] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000) <7> [374.559022] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A] <7> [374.559475] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [374.561282] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1] <7> [374.561698] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:270:pipe B] <7> [374.566022] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe B <7> [374.566481] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [374.566609] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [374.566709] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [374.567108] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [374.567377] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [374.567622] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.567890] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.568115] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.568377] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [374.568731] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [374.569092] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [374.569408] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [374.569716] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [374.570018] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [374.570968] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [374.576468] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [374.576731] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [374.577069] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [374.577228] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [374.577359] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [374.577483] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [374.577603] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [374.577746] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [374.577973] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [374.578165] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [374.578344] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [374.578515] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [374.578682] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [374.578914] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 19318 kHz -> 38635 kHz <7> [374.579094] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [374.591037] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [374.592595] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [374.592668] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [374.592719] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [374.592966] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [374.593228] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [374.593474] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.593718] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.593987] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.594140] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [374.594342] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [374.594536] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [374.594720] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [374.594916] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [374.595091] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [374.595571] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [374.609241] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [374.609561] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [374.609989] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [374.610234] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [374.610443] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [374.610638] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [374.610840] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [374.611066] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [374.611373] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [374.611651] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [374.611939] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [374.612193] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [374.612442] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [374.612783] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [374.624394] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [374.626077] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [374.626188] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:434] is removed <7> [374.626269] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [374.626608] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [374.626889] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [374.627070] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.627243] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.627402] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.627593] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [374.627894] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [374.628156] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [374.628411] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [374.628656] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [374.628903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [374.629539] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [374.644185] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [374.644523] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [374.644982] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [374.645231] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [374.645451] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [374.645662] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [374.645885] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [374.646117] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [374.646564] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [374.646791] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [374.646971] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [374.647145] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [374.647309] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [374.647469] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [374.647642] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [374.647923] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400 <7> [374.648178] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400 <7> [374.648426] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [374.648659] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [374.648910] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193 <7> [374.649205] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 38635 kHz -> 77269 kHz <7> [374.649445] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [374.657728] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [374.659221] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [374.659326] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:433] is removed <7> [374.659397] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [374.659737] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [374.659914] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [374.659998] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.660080] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.660163] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.660261] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [374.660404] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [374.660538] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [374.660668] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [374.660828] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [374.660954] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [374.661309] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [374.681634] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [374.681824] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [374.681997] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [374.682104] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [374.682195] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [374.682282] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [374.682366] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [374.682467] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [374.682610] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [374.682764] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [374.682903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [374.683029] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [374.683155] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [374.683317] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [374.691032] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [374.692704] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [374.692808] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:433] is removed <7> [374.692883] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [374.693189] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [374.693418] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [374.693668] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.693881] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.694009] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.694164] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [374.694390] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [374.694615] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [374.694864] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [374.695079] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [374.695288] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [374.695880] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [374.714342] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [374.714557] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [374.714831] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B] <7> [374.715057] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408 <7> [374.715217] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643 <7> [374.715362] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [374.715498] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [374.715647] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [374.715784] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [374.715914] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [374.716039] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [374.716166] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [374.716291] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [374.716440] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2 <7> [374.716663] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1948 qgv_peak_bw: 38400 <7> [374.716873] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1948 qgv_peak_bw: 38400 <7> [374.717071] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1948 qgv_peak_bw: 38400 <7> [374.717258] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1948 qgv_peak_bw: 38400 <7> [374.717442] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1948 <7> [374.717691] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [374.724375] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [374.725722] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [374.725773] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:433] is removed <7> [374.725824] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [374.725979] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 1408) -> ( 0 - 0), size 1408 -> 0 <7> [374.726172] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1408 - 4051) -> ( 0 - 0), size 2643 -> 0 <7> [374.726356] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [374.726540] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.726785] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.726915] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.727008] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [374.727102] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.727193] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.727283] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.727389] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [374.727544] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [374.727700] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [374.727846] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [374.727985] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [374.728124] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [374.728528] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [374.752151] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [374.752388] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [374.752678] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B] <7> [374.752899] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456 <7> [374.753042] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595 <7> [374.753170] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [374.753288] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [374.753405] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [374.753519] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [374.753648] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [374.753765] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [374.753880] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [374.753990] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [374.754118] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2 <7> [374.754306] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3895 qgv_peak_bw: 38400 <7> [374.754479] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3895 qgv_peak_bw: 38400 <7> [374.754659] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3895 qgv_peak_bw: 38400 <7> [374.754827] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3895 qgv_peak_bw: 38400 <7> [374.754984] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3895 <7> [374.755186] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [374.774366] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [374.776056] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [374.776172] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:433] is removed <7> [374.776273] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [374.776670] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 1456) -> ( 0 - 0), size 1456 -> 0 <7> [374.776914] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1456 - 4051) -> ( 0 - 0), size 2595 -> 0 <7> [374.777070] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [374.777218] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.777368] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.777520] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.777698] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [374.777850] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.777994] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.778133] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.778303] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [374.778554] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [374.778783] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [374.779000] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [374.779211] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [374.779416] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [374.780016] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [374.803529] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [374.803752] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [374.804032] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [374.804171] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [374.804287] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [374.804399] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [374.804563] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [374.804707] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [374.804898] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [374.805075] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [374.805244] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [374.805408] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [374.805580] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [374.805791] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [374.808521] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [374.808714] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [374.808875] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [374.809009] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [374.809126] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [374.824358] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [374.826047] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [374.826158] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:433] is removed <7> [374.826246] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [374.826608] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [374.826865] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [374.827051] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.827210] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.827365] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.827568] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [374.827834] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [374.828083] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [374.828318] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [374.828565] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [374.828791] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [374.829354] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [374.854986] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [374.855199] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [374.855493] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [374.855627] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [374.855737] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [374.855844] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [374.855947] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [374.856071] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [374.856244] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [374.856406] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [374.856580] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [374.856731] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [374.856880] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [374.857073] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [374.858475] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [374.858977] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [374.859154] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [374.860485] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [374.860624] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [374.874353] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [374.876062] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [374.876163] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:433] is removed <7> [374.876245] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [374.876561] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [374.876802] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [374.876977] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.877130] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.877282] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.877480] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [374.877748] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [374.877997] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [374.878233] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [374.878463] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [374.878687] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [374.879306] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [374.905023] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [374.905251] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [374.905558] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [374.905690] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [374.905798] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [374.905900] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [374.905992] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [374.906106] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [374.906266] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [374.906428] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [374.906570] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [374.906705] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [374.906842] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [374.907024] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [374.909408] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [374.910013] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [374.910129] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [374.910312] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [374.910459] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [374.924343] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [374.925959] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [374.926071] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:433] is removed <7> [374.926144] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [374.926483] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [374.926730] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [374.926918] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.927062] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.927205] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.927399] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [374.927641] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [374.927871] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [374.928085] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [374.928294] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [374.928531] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [374.929093] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [374.958351] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [374.958563] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [374.958667] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [374.962525] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [374.962670] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [374.962825] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [374.962915] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [374.962990] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [374.963063] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [374.963134] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [374.963223] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [374.963369] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400 <7> [374.963492] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400 <7> [374.963609] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [374.963723] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [374.963837] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193 <7> [374.963988] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [374.969118] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [374.969271] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [374.974345] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [374.975628] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [374.975676] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:433] is removed <7> [374.975710] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [374.975834] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [374.975922] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [374.976056] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.976191] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.976347] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [374.976517] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [374.976752] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [374.976958] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [374.977073] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [374.977187] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [374.977302] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [374.977722] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [374.992032] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [374.992330] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [374.992559] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [374.992687] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [374.992795] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [374.992902] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [374.993004] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [374.993128] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [374.993403] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [374.993539] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [374.993635] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [374.993730] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [374.993825] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [374.993916] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [374.994020] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [374.994172] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [374.994339] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [374.994486] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [374.994635] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [374.994774] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [374.994967] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [375.007608] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.008938] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [375.009037] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:434] is removed <7> [375.009110] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.009450] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [375.009687] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.009890] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.009973] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.010057] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.010165] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.010334] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.010484] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.010627] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.010775] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.010921] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.011370] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.027275] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [375.027550] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [375.027855] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [375.028040] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.028199] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.028381] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [375.028536] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [375.028717] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [375.028968] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [375.029197] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [375.029435] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.029651] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.029859] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [375.030125] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [375.040992] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.043684] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [375.043823] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:433] is removed <7> [375.043901] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.044223] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [375.044478] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.044671] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.044852] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.045029] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.045223] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.045535] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.045791] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.046090] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.046340] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.046568] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.047157] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.058729] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [375.058950] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [375.059301] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [375.059547] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.059769] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.059976] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [375.060170] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [375.060489] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [375.060786] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [375.061034] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [375.061286] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.061529] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.061762] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [375.062043] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [375.074325] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.075987] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [375.076096] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:434] is removed <7> [375.076166] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.076714] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [375.077012] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.077243] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.077467] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.077692] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.077899] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.078168] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.078470] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.078722] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.078966] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.079207] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.079740] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.093148] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [375.093378] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [375.093705] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [375.093930] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.094137] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.094405] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [375.094611] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [375.094875] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [375.095163] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400 <7> [375.095472] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400 <7> [375.095726] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [375.096021] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [375.096273] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193 <7> [375.096562] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [375.107676] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.109610] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [375.109725] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:433] is removed <7> [375.109801] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.110129] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [375.110395] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.110588] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.110775] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.110972] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.111178] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.111432] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.111675] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.111911] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.112131] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.112397] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.112918] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.131494] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [375.131658] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [375.131870] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [375.132018] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.132178] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.132310] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [375.132435] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [375.132571] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [375.132751] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [375.132920] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [375.133081] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [375.133263] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [375.133431] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [375.133636] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [375.140993] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.142670] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [375.142735] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:433] is removed <7> [375.142779] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.143095] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [375.143525] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.143844] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.144020] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.144244] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.144416] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.144672] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.144897] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.145108] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.145342] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.145539] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.145987] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.164701] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [375.164963] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [375.165330] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B] <7> [375.165648] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408 <7> [375.165874] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643 <7> [375.166088] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.166339] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.166534] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [375.166761] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [375.166986] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.167176] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.167351] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [375.167507] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [375.167685] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2 <7> [375.167925] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1948 qgv_peak_bw: 38400 <7> [375.168156] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1948 qgv_peak_bw: 38400 <7> [375.168378] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1948 qgv_peak_bw: 38400 <7> [375.168589] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1948 qgv_peak_bw: 38400 <7> [375.168838] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1948 <7> [375.169102] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [375.174250] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.175545] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [375.175592] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:433] is removed <7> [375.175631] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.175764] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 1408) -> ( 0 - 0), size 1408 -> 0 <7> [375.175863] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1408 - 4051) -> ( 0 - 0), size 2643 -> 0 <7> [375.176221] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.176563] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.176870] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.176966] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.177049] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.177151] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.177231] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.177315] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.177416] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.177558] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.177679] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.177795] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.177909] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.178018] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.178321] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.201147] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [375.201359] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [375.201688] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B] <7> [375.201961] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456 <7> [375.202204] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595 <7> [375.202403] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.202587] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.202765] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [375.202963] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [375.203171] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.203324] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.203475] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [375.203630] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [375.203806] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2 <7> [375.204043] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3895 qgv_peak_bw: 38400 <7> [375.204310] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3895 qgv_peak_bw: 38400 <7> [375.204527] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3895 qgv_peak_bw: 38400 <7> [375.204731] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3895 qgv_peak_bw: 38400 <7> [375.204923] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3895 <7> [375.205179] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [375.208095] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [375.208658] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [375.208820] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [375.209798] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [375.209918] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [375.224289] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.226143] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [375.226259] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:433] is removed <7> [375.226344] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.226775] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 1456) -> ( 0 - 0), size 1456 -> 0 <7> [375.227097] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1456 - 4051) -> ( 0 - 0), size 2595 -> 0 <7> [375.227317] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.227520] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.227713] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.227908] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.228120] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.228289] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.228449] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.228649] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.228845] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.229111] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.229356] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.229604] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.229825] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.230056] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.230610] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.251895] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [375.252128] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [375.252403] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [375.252617] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.252793] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.252961] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [375.253166] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [375.253345] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [375.253580] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [375.253798] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [375.254010] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.254207] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.254390] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [375.254654] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [375.274281] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.276258] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [375.276373] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:433] is removed <7> [375.276450] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.276907] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [375.277260] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.277489] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.277711] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.277952] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.278241] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.278543] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.278838] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.279144] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.279412] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.279708] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.280322] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.304868] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [375.305081] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [375.305337] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [375.305511] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.305671] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.305826] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [375.306000] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [375.306162] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [375.306462] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [375.306610] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [375.306736] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.306860] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.306998] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [375.307114] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [375.307234] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [375.307430] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [375.307592] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [375.307749] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.307902] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.308065] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [375.308248] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [375.308983] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [375.309514] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [375.309676] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [375.311446] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [375.311561] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [375.324272] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.326118] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [375.326215] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:433] is removed <7> [375.326277] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.326665] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [375.326975] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.327166] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.327341] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.327533] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.327719] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.327986] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.328221] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.328473] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.328689] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.328896] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.329412] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.355069] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [375.355240] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [375.355504] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [375.355685] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.355854] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.356075] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [375.356233] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [375.356414] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [375.356623] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [375.356828] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [375.357041] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.357219] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.357392] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [375.357601] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [375.358933] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [375.359443] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [375.359656] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [375.360808] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [375.360962] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [375.374265] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.375953] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [375.376060] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:433] is removed <7> [375.376127] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.376556] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [375.376919] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.377110] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.377288] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.377477] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.377660] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.377924] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.378161] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.378387] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.378598] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.378840] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.379391] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.408924] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [375.409207] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [375.409388] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [375.413522] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [375.413649] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [375.413779] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [375.413874] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.413963] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.414052] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [375.414132] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [375.414210] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [375.414302] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400 <7> [375.414392] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400 <7> [375.414483] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [375.414588] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [375.414699] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193 <7> [375.414851] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [375.420301] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [375.420421] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [375.424246] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.425466] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [375.425501] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:433] is removed <7> [375.425529] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.425617] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [375.425687] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.425754] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.425836] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.425921] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.426023] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.426185] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.426347] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.426482] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.426613] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.426744] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.427079] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.441477] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [375.441629] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [375.441844] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [375.441989] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.442115] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.442234] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [375.442349] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [375.442487] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [375.442662] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [375.442838] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [375.442987] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [375.443129] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [375.443266] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [375.443454] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [375.457564] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.458787] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [375.458822] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:434] is removed <7> [375.458849] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.459159] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [375.459448] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.459724] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.459898] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.460013] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.460139] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.460305] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.460457] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.460586] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.460716] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.460881] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.461220] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.476158] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [375.476363] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [375.476672] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [375.477003] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.477206] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.477398] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [375.477583] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [375.477856] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [375.478112] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [375.478360] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [375.478584] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.478813] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.479086] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [375.479375] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [375.490914] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.492444] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [375.492511] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [375.492555] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.492840] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [375.493050] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.493225] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.493376] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.493533] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.493688] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.493924] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.494120] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.494308] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.494494] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.494677] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.495160] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.508776] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [375.508963] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [375.509229] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [375.509428] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.509617] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.509845] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [375.510024] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [375.510271] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [375.510543] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [375.510804] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [375.511042] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.511260] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.511508] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [375.511800] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [375.524246] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.525838] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [375.525904] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:434] is removed <7> [375.525977] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.526453] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [375.526896] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.527097] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.527286] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.527499] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.527727] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.528022] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.528264] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.528514] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.528766] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.528988] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.529511] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.542827] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [375.543029] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [375.543342] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [375.543578] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.543848] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.544059] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [375.544297] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [375.544529] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [375.544860] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400 <7> [375.545136] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400 <7> [375.545397] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [375.545700] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [375.545946] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193 <7> [375.546243] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [375.557568] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.559491] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [375.559613] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [375.559714] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.560030] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [375.560218] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.560393] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.560561] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.560831] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.561014] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.561245] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.561462] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.561682] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.561888] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.562088] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.562584] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.581523] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [375.581730] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [375.581942] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [375.582103] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.582239] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.582369] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [375.582494] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [375.582663] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [375.582849] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [375.583019] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [375.583193] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [375.583363] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [375.583535] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [375.583764] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [375.590861] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.592636] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [375.592695] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [375.592734] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.592947] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [375.593280] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.593600] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.593954] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.594118] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.594331] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.594582] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.594839] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.595063] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.595272] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.595477] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.596000] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.614242] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [375.614472] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [375.614912] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [375.615239] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B] <7> [375.615552] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408 <7> [375.615824] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643 <7> [375.616039] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.616246] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.616440] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [375.616644] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [375.616826] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.617028] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.617222] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [375.617398] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [375.617580] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2 <7> [375.617931] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [375.618096] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B] <7> [375.618275] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408 <7> [375.618420] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643 <7> [375.618557] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.618725] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.618862] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [375.618995] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [375.619125] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.619272] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.619395] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [375.619518] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [375.619667] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2 <7> [375.619860] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1948 qgv_peak_bw: 38400 <7> [375.620038] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1948 qgv_peak_bw: 38400 <7> [375.620206] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1948 qgv_peak_bw: 38400 <7> [375.620370] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1948 qgv_peak_bw: 38400 <7> [375.620556] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1948 <7> [375.620809] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [375.624291] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.625499] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [375.625532] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [375.625560] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.625697] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 1408) -> ( 0 - 0), size 1408 -> 0 <7> [375.625785] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1408 - 4051) -> ( 0 - 0), size 2643 -> 0 <7> [375.625865] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.625962] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.626187] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.626420] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.626682] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.626892] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.626957] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.627026] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.627108] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.627215] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.627311] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.627406] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.627498] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.627592] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.627869] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.646630] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [375.646756] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [375.646931] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B] <7> [375.647106] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456 <7> [375.647235] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595 <7> [375.647352] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.647466] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.647607] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [375.647721] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [375.647833] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.647941] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.648044] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [375.648147] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [375.648266] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2 <7> [375.648500] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [375.648631] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B] <7> [375.648760] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456 <7> [375.648859] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595 <7> [375.648953] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.649045] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.649135] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [375.649223] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [375.649309] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.649391] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.649472] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [375.649561] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [375.649649] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2 <7> [375.649839] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [375.649928] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B] <7> [375.650023] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456 <7> [375.650102] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595 <7> [375.650178] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.650249] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.650322] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [375.650395] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [375.650466] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.650535] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.650630] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [375.650700] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [375.650772] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2 <7> [375.650890] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3895 qgv_peak_bw: 38400 <7> [375.651002] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3895 qgv_peak_bw: 38400 <7> [375.651110] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3895 qgv_peak_bw: 38400 <7> [375.651217] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3895 qgv_peak_bw: 38400 <7> [375.651320] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3895 <7> [375.651453] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [375.657638] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.658828] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [375.658879] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [375.658918] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.659119] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 1456) -> ( 0 - 0), size 1456 -> 0 <7> [375.659259] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1456 - 4051) -> ( 0 - 0), size 2595 -> 0 <7> [375.659382] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.659501] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.659691] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.659830] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.659914] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.659969] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.660023] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.660081] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.660149] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.660244] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.660337] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.660420] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.660505] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.660616] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.660893] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.681366] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [375.681463] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [375.681646] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [375.681749] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.681844] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.681936] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [375.682025] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [375.682128] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [375.682276] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [375.682425] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [375.682570] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.682698] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.682830] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [375.682987] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [375.690849] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.692434] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [375.692572] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [375.692643] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.692963] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [375.693101] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.693224] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.693330] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.693430] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.693568] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.693719] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.693863] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.694006] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.694140] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.694293] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.694651] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.717852] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [375.718000] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [375.718200] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [375.718341] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.718498] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.718625] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [375.718746] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [375.718892] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [375.719063] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [375.719224] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [375.719377] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.719544] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.719692] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [375.719873] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [375.724285] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.725488] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [375.725522] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [375.725547] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.725662] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [375.725742] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.725811] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.725876] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.725949] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.726081] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.726262] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.726437] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.726649] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.726821] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.726974] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.727197] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.749916] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [375.750066] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [375.750279] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [375.750459] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.750611] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.750753] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [375.750891] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [375.751047] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [375.751242] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [375.751428] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [375.751634] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.751811] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.751984] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [375.752191] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [375.757559] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.758799] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [375.758840] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [375.758869] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.759240] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [375.759635] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.759919] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.760006] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.760092] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.760187] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.760321] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.760450] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.760570] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.760686] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.760802] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.761069] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.791261] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [375.791343] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [375.791455] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [375.791496] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [375.791604] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.791622] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [375.791694] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.791737] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [375.791766] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [375.791835] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [375.791916] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [375.792008] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400 <7> [375.792098] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400 <7> [375.792185] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [375.792273] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [375.792360] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193 <7> [375.792489] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [375.797014] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [375.797127] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [375.807510] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.809064] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [375.809149] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [375.809205] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.809696] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [375.809925] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.810002] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.810073] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.810143] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.810225] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.810338] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.810471] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.810578] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.810670] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.810763] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.811012] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.825017] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [375.825196] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [375.825443] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [375.825607] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.825761] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.825903] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [375.826050] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [375.826209] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [375.826404] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [375.826591] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [375.826771] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [375.826944] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [375.827113] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [375.827365] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [375.840854] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.842550] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [375.842597] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:434] is removed <7> [375.842630] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.842804] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [375.843082] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.843465] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.843820] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.843997] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.844138] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.844388] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.844601] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.844800] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.845000] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.845200] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.845714] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.859364] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [375.859626] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [375.860014] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [375.860296] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.860627] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.860876] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [375.861171] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [375.861494] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [375.861819] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [375.862130] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [375.862443] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.862784] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.863054] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [375.863392] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [375.874189] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.875798] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [375.875865] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [375.875929] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.876391] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [375.876758] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.876982] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.877166] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.877747] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.877944] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.878192] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.878488] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.878718] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.878944] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.879154] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.879669] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.892219] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [375.892494] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [375.892813] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [375.893065] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.893329] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.893559] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [375.893815] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [375.894051] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [375.894462] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [375.894671] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [375.894853] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.895025] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.895191] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [375.895394] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [375.895563] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [375.895809] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [375.896043] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [375.896267] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.896576] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.896800] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [375.897102] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [375.907474] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.908790] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [375.908831] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:434] is removed <7> [375.908861] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.909247] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [375.909687] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.909917] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.910025] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.910146] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.910264] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.910451] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.910598] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.910740] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.910890] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.911026] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.911353] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.931065] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [375.931277] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [375.931606] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [375.931894] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.932125] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.932412] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [375.932616] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [375.932844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [375.933124] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [375.933416] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [375.933708] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [375.933946] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [375.934180] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [375.934490] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [375.940843] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.942616] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [375.942666] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [375.942699] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.942886] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [375.943150] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.943571] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.943921] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.944072] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.944252] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.944437] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.944617] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.944791] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.944957] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.945136] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.945542] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [375.971415] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [375.971603] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [375.971830] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [375.972002] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [375.972137] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [375.972293] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [375.972428] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [375.972596] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [375.972807] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [375.972984] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [375.973153] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.973341] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [375.973498] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [375.973691] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [375.975252] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [375.975828] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [375.976019] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [375.976908] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [375.977035] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [375.990861] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [375.992591] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [375.992655] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [375.992696] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [375.992930] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [375.993312] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [375.993579] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.993830] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.994042] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [375.994238] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [375.994474] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [375.994692] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [375.994904] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.995112] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [375.995362] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [375.995824] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [376.020772] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [376.020973] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [376.021295] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [376.021494] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [376.021671] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [376.021836] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [376.021994] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [376.022197] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [376.022425] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [376.022640] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [376.022847] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [376.023044] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [376.023252] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [376.023482] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [376.025240] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [376.025777] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [376.025994] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [376.026701] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [376.026843] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [376.040843] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [376.042595] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [376.042681] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [376.042736] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [376.043013] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [376.043261] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [376.043437] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.043592] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.043769] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.043954] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [376.044222] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [376.044427] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [376.044623] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [376.044815] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [376.045025] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [376.045501] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [376.070876] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [376.071079] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [376.071373] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [376.071548] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [376.071707] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [376.071856] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [376.071996] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [376.072177] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [376.072408] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [376.072597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [376.072773] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [376.072950] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [376.073165] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [376.073396] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [376.075164] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [376.075680] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [376.075854] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [376.076624] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [376.076752] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [376.090838] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [376.092612] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [376.092726] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [376.092796] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [376.093293] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [376.093693] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [376.093935] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.094128] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.094296] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.094511] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [376.094762] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [376.094993] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [376.095229] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [376.095439] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [376.095648] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [376.096202] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [376.108897] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [376.109232] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [376.109598] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [376.109871] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [376.110149] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [376.110373] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [376.110632] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [376.110903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [376.111242] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [376.111538] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [376.111825] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [376.112151] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [376.112424] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [376.112730] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [376.124147] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [376.125684] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [376.125752] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:434] is removed <7> [376.125793] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [376.126223] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [376.126603] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [376.126888] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.127092] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.127265] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.127487] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [376.127747] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [376.127977] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [376.128220] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [376.128430] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [376.128636] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [376.129159] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [376.141864] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [376.142108] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [376.142442] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [376.142717] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [376.142957] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [376.143239] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [376.143473] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [376.143785] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [376.144115] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [376.144444] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [376.144745] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [376.145029] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [376.145398] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [376.145711] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [376.157519] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [376.159449] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [376.159562] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [376.159633] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [376.160001] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [376.160311] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [376.160514] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.160706] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.160888] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.161118] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [376.161387] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [376.161638] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [376.161922] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [376.162177] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [376.162402] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [376.162945] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [376.175431] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [376.175606] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [376.175848] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [376.176081] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [376.176275] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [376.176454] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [376.176656] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [376.176885] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [376.177169] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [376.177408] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [376.177642] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [376.177880] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [376.178115] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [376.178381] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [376.190796] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [376.192554] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [376.192660] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:434] is removed <7> [376.192728] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [376.193107] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [376.193402] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [376.193639] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.193871] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.194120] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.194316] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [376.194617] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [376.194858] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [376.195101] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [376.195318] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [376.195563] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [376.196058] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [376.215270] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [376.215502] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [376.215850] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [376.216208] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [376.216454] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [376.216690] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [376.216946] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [376.217235] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [376.217696] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [376.217932] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [376.218170] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [376.218347] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [376.218520] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [376.218720] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [376.218917] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [376.219245] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [376.219514] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [376.219739] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [376.219950] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [376.220228] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [376.220486] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [376.224086] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [376.225373] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [376.225415] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [376.225447] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [376.225588] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [376.225700] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [376.225804] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.225904] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.226138] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.226491] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [376.226903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [376.227064] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [376.227207] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [376.227340] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [376.227468] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [376.227807] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [376.248565] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [376.248713] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [376.248903] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [376.249073] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [376.249203] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [376.249329] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [376.249452] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [376.249613] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [376.249823] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [376.250109] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [376.250364] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [376.250614] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [376.250913] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [376.251488] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [376.257434] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [376.258852] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [376.258971] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [376.259045] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [376.259471] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [376.259829] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [376.260082] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.260238] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.260377] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.260527] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [376.260753] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [376.261099] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [376.261512] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [376.261889] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [376.262104] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [376.262646] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [376.281733] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [376.281843] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [376.282010] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [376.282104] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [376.282191] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [376.282277] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [376.282360] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [376.282453] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [376.282589] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [376.282729] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [376.282848] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [376.282980] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [376.283100] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [376.283247] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [376.290756] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [376.291923] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [376.292011] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [376.292059] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [376.292319] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [376.292530] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [376.292728] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.292935] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.293023] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.293117] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [376.293224] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [376.293311] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [376.293397] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [376.293481] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [376.293564] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [376.293774] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [376.316743] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [376.316859] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [376.317055] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [376.317176] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [376.317288] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [376.317395] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [376.317497] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [376.317612] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [376.317760] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [376.317910] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [376.318047] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [376.318178] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [376.318304] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [376.318459] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [376.324113] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [376.325430] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [376.325495] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [376.325538] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [376.325734] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [376.325928] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [376.326067] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.326196] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.326323] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [376.326447] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [376.326613] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [376.326776] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [376.326970] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [376.327075] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [376.327176] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [376.327428] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <6> [376.341767] [IGT] kms_plane_scaling: finished subtest pipe-B, SUCCESS

<6> [373.411208] [IGT] kms_plane_scaling: starting dynamic subtest pipe-B

<7> [373.415675] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [373.417836] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [373.418209] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:270:pipe B] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [373.418573] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000

<7> [373.418838] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [373.419096] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:270:pipe B]

<7> [373.419356] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [373.419588] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [373.419812] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [373.420027] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [373.420234] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)

<7> [373.420444] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [373.420640] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [373.420834] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)

<7> [373.421024] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)

<7> [373.421201] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)

<7> [373.421386] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)

<7> [373.421559] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)

<7> [373.421724] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)

<7> [373.421890] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [373.422050] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [373.422207] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [373.422369] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)

<7> [373.422521] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)

<7> [373.422669] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)

<7> [373.422814] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)

<7> [373.422958] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)

<7> [373.423098] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)

<7> [373.423235] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)

<7> [373.423406] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)

<7> [373.423537] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)

<7> [373.423667] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [373.423797] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [373.423927] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [373.424049] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)

<7> [373.424172] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)

<7> [373.424302] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)

<7> [373.424419] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [373.424532] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [373.424645] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [373.424761] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [373.424872] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)

<7> [373.424978] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)

<7> [373.425081] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 432000, found 0)

<7> [373.425186] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [373.425299] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.enable (expected no, found yes)

<7> [373.425304] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [373.425404] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [373.425434] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [373.425507] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1)

<7> [373.425537] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [373.425609] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in lane_count (expected 0, found 4)

<7> [373.425712] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)

<7> [373.425816] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [373.425919] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [373.426021] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)

<7> [373.426124] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)

<7> [373.426228] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)

<7> [373.426339] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)

<7> [373.426446] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)

<7> [373.426550] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)

<7> [373.426655] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [373.426760] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [373.426866] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [373.426970] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)

<7> [373.427073] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)

<7> [373.427176] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)

<7> [373.427286] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)

<7> [373.427390] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)

<7> [373.427492] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)

<7> [373.427595] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)

<7> [373.427698] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)

<7> [373.427803] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)

<7> [373.427907] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [373.428012] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [373.428116] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [373.428220] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)

<7> [373.428354] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)

<7> [373.428458] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)

<7> [373.428561] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [373.428663] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [373.428765] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [373.428869] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [373.428973] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)

<7> [373.429077] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)

<7> [373.429181] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in port_clock (expected 0, found 432000)

<7> [373.429294] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] fastset requirement not met, forcing full modeset

<7> [373.429402] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0

<7> [373.429534] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [373.429662] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x2

<7> [373.429746] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:270:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x1 -> 0x2

<7> [373.429828] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0

<7> [373.429902] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [373.429974] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:264:cursor B] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45

<7> [373.430043] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [373.430112] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [373.430181] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [373.430249] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [373.430350] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [373.430474] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [373.430592] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [373.430709] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [373.430823] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [373.430936] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [373.431081] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min cdclk: 309076 kHz -> 0 kHz

<7> [373.431197] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:270:pipe B] min cdclk: 0 kHz -> 309076 kHz

<7> [373.431347] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 77269 kHz -> 19318 kHz

<7> [373.431504] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:270:pipe B] allocated DPLL 0

<7> [373.431609] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:270:pipe B] reserving DPLL 0

<7> [373.431712] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [373.431795] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: no [modeset]

<7> [373.431914] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [373.432026] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [373.432138] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [373.432251] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [373.432372] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [373.432486] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [373.432596] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: yes [modeset]

<7> [373.432707] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [373.432818] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0

<7> [373.432928] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [373.433038] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [373.433149] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [373.433260] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [373.433384] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64

<7> [373.433495] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [373.433603] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled

<7> [373.433712] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [373.433821] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [373.433932] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0

<7> [373.434041] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [373.434152] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [373.434260] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [373.434377] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [373.434486] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [373.434594] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [373.434703] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [373.434813] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [373.434922] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [373.435030] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97

<7> [373.435139] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906

<7> [373.435248] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [373.435364] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [373.435476] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [373.435585] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [373.435696] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [373.435805] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [373.435913] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 309076, min voltage level 0

<7> [373.436021] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0

<7> [373.436128] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x40, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [373.436236] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0

<7> [373.436352] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [373.436462] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [373.436572] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [373.436681] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [373.436789] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no,

<7> [373.436896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.

<7> [373.437004] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [373.437110] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [373.437221] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [373.437336] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [373.437447] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [373.437555] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [373.437663] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [373.437770] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [373.437878] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [373.437987] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [373.438097] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [373.438205] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [373.438320] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [373.438430] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [373.438536] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [373.438643] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [373.438750] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [373.438860] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [373.438968] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [373.439077] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:154:plane 1B] fb: [FB:432] 2880x1800 format = RG16 little-endian (0x36314752) modifier = 0x0, visible: yes

<7> [373.439187] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0

<7> [373.439301] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2160x1350+0+0

<7> [373.439412] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:184:plane 2B] fb: [NOFB], visible: no

<7> [373.439518] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:214:plane 3B] fb: [NOFB], visible: no

<7> [373.439628] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:244:plane 4B] fb: [NOFB], visible: no

<7> [373.439737] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:254:plane 5B] fb: [NOFB], visible: no

<7> [373.439846] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:264:cursor B] fb: [NOFB], visible: no

<7> [373.441432] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [373.441558] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [373.441724] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [373.441853] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [373.442034] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000)

<7> [373.442298] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [373.442429] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [373.646174] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0

<7> [373.647483] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [373.659387] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off

<7> [373.659836] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [373.659793] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [373.660268] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [373.660413] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short

<7> [373.712468] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [373.712862] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short

<7> [373.720917] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [373.721215] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]

<7> [373.721289] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]

<7> [373.721945] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]

<7> [373.722683] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [373.723128] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [373.723537] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A]

<7> [373.723810] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1]

<7> [373.724094] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A]

<7> [373.724355] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B]

<7> [373.724612] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C]

<7> [373.724887] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2]

<7> [373.725144] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A]

<7> [373.725399] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B]

<7> [373.725650] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C]

<7> [373.725920] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3]

<7> [373.726176] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A]

<7> [373.726434] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B]

<7> [373.726691] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C]

<7> [373.726962] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:402:DP-1]

<7> [373.727221] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:414:DP-2]

<7> [373.727477] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:422:DP-3]

<7> [373.727795] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 6 (mbus joined: yes)

<7> [373.728108] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [373.729663] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:270:pipe B]

<7> [373.729952] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [373.732255] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on

<7> [373.732496] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (489 ms remaining)

<7> [373.749725] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [373.750265] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long

<7> [373.750769] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [373.751299] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]

<7> [374.229485] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [374.317224] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [374.317594] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on

<7> [374.317962] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063

<7> [374.354095] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [374.354525] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long

<7> [374.354926] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20

<7> [374.355516] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]

<7> [374.526257] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [374.526976] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on

<7> [374.527473] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b

<7> [374.530002] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [374.531716] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [374.532698] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05

<7> [374.534110] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [374.535692] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [374.537003] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK

<7> [374.537422] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4

<7> [374.539036] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [374.539453] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4

<7> [374.540344] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe B

<7> [374.540972] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [374.541403] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe B

<7> [374.541967] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 13892

<7> [374.557850] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A

<7> [374.558410] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000)

<7> [374.559022] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]

<7> [374.559475] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [374.561282] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]

<7> [374.561698] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:270:pipe B]

<7> [374.566022] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe B

<7> [374.566481] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [374.566609] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [374.566709] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [374.567108] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [374.567377] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [374.567622] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.567890] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.568115] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.568377] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [374.568731] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [374.569092] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [374.569408] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [374.569716] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [374.570018] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [374.570968] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [374.576468] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [374.576731] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [374.577069] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [374.577228] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [374.577359] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [374.577483] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [374.577603] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [374.577746] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [374.577973] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [374.578165] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [374.578344] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [374.578515] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [374.578682] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [374.578914] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 19318 kHz -> 38635 kHz

<7> [374.579094] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [374.591037] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [374.592595] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [374.592668] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [374.592719] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [374.592966] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [374.593228] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [374.593474] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.593718] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.593987] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.594140] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [374.594342] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [374.594536] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [374.594720] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [374.594916] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [374.595091] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [374.595571] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [374.609241] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [374.609561] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [374.609989] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [374.610234] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [374.610443] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [374.610638] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [374.610840] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [374.611066] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [374.611373] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [374.611651] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [374.611939] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [374.612193] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [374.612442] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [374.612783] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [374.624394] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [374.626077] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [374.626188] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:434] is removed

<7> [374.626269] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [374.626608] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [374.626889] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [374.627070] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.627243] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.627402] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.627593] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [374.627894] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [374.628156] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [374.628411] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [374.628656] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [374.628903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [374.629539] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [374.644185] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [374.644523] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [374.644982] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [374.645231] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [374.645451] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [374.645662] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [374.645885] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [374.646117] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [374.646564] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [374.646791] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [374.646971] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [374.647145] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [374.647309] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [374.647469] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [374.647642] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [374.647923] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400

<7> [374.648178] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400

<7> [374.648426] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [374.648659] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [374.648910] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193

<7> [374.649205] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 38635 kHz -> 77269 kHz

<7> [374.649445] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [374.657728] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [374.659221] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [374.659326] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:433] is removed

<7> [374.659397] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [374.659737] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [374.659914] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [374.659998] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.660080] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.660163] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.660261] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [374.660404] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [374.660538] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [374.660668] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [374.660828] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [374.660954] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [374.661309] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [374.681634] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [374.681824] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [374.681997] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [374.682104] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [374.682195] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [374.682282] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [374.682366] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [374.682467] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [374.682610] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [374.682764] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [374.682903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [374.683029] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [374.683155] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [374.683317] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [374.691032] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [374.692704] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [374.692808] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:433] is removed

<7> [374.692883] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [374.693189] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [374.693418] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [374.693668] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.693881] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.694009] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.694164] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [374.694390] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [374.694615] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [374.694864] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [374.695079] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [374.695288] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [374.695880] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [374.714342] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [374.714557] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [374.714831] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B]

<7> [374.715057] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408

<7> [374.715217] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643

<7> [374.715362] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [374.715498] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [374.715647] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [374.715784] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [374.715914] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [374.716039] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [374.716166] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [374.716291] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [374.716440] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2

<7> [374.716663] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1948 qgv_peak_bw: 38400

<7> [374.716873] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1948 qgv_peak_bw: 38400

<7> [374.717071] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1948 qgv_peak_bw: 38400

<7> [374.717258] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1948 qgv_peak_bw: 38400

<7> [374.717442] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1948

<7> [374.717691] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [374.724375] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [374.725722] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [374.725773] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:433] is removed

<7> [374.725824] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [374.725979] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 1408) -> ( 0 - 0), size 1408 -> 0

<7> [374.726172] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1408 - 4051) -> ( 0 - 0), size 2643 -> 0

<7> [374.726356] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [374.726540] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.726785] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.726915] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.727008] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [374.727102] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.727193] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.727283] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.727389] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [374.727544] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [374.727700] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [374.727846] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [374.727985] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [374.728124] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [374.728528] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [374.752151] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [374.752388] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [374.752678] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B]

<7> [374.752899] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456

<7> [374.753042] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595

<7> [374.753170] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [374.753288] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [374.753405] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [374.753519] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [374.753648] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [374.753765] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [374.753880] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [374.753990] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [374.754118] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2

<7> [374.754306] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3895 qgv_peak_bw: 38400

<7> [374.754479] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3895 qgv_peak_bw: 38400

<7> [374.754659] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3895 qgv_peak_bw: 38400

<7> [374.754827] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3895 qgv_peak_bw: 38400

<7> [374.754984] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3895

<7> [374.755186] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [374.774366] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [374.776056] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [374.776172] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:433] is removed

<7> [374.776273] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [374.776670] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 1456) -> ( 0 - 0), size 1456 -> 0

<7> [374.776914] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1456 - 4051) -> ( 0 - 0), size 2595 -> 0

<7> [374.777070] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [374.777218] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.777368] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.777520] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.777698] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [374.777850] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.777994] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.778133] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.778303] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [374.778554] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [374.778783] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [374.779000] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [374.779211] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [374.779416] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [374.780016] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [374.803529] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [374.803752] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [374.804032] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [374.804171] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [374.804287] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [374.804399] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [374.804563] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [374.804707] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [374.804898] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [374.805075] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [374.805244] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [374.805408] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [374.805580] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [374.805791] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [374.808521] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [374.808714] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [374.808875] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [374.809009] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [374.809126] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [374.824358] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [374.826047] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [374.826158] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:433] is removed

<7> [374.826246] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [374.826608] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [374.826865] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [374.827051] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.827210] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.827365] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.827568] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [374.827834] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [374.828083] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [374.828318] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [374.828565] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [374.828791] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [374.829354] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [374.854986] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [374.855199] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [374.855493] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [374.855627] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [374.855737] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [374.855844] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [374.855947] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [374.856071] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [374.856244] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [374.856406] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [374.856580] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [374.856731] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [374.856880] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [374.857073] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [374.858475] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [374.858977] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [374.859154] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [374.860485] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [374.860624] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [374.874353] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [374.876062] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [374.876163] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:433] is removed

<7> [374.876245] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [374.876561] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [374.876802] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [374.876977] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.877130] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.877282] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.877480] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [374.877748] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [374.877997] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [374.878233] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [374.878463] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [374.878687] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [374.879306] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [374.905023] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [374.905251] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [374.905558] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [374.905690] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [374.905798] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [374.905900] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [374.905992] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [374.906106] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [374.906266] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [374.906428] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [374.906570] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [374.906705] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [374.906842] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [374.907024] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [374.909408] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [374.910013] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [374.910129] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [374.910312] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [374.910459] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [374.924343] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [374.925959] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [374.926071] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:433] is removed

<7> [374.926144] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [374.926483] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [374.926730] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [374.926918] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.927062] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.927205] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.927399] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [374.927641] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [374.927871] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [374.928085] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [374.928294] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [374.928531] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [374.929093] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [374.958351] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [374.958563] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [374.958667] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [374.962525] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [374.962670] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [374.962825] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [374.962915] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [374.962990] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [374.963063] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [374.963134] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [374.963223] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [374.963369] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400

<7> [374.963492] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400

<7> [374.963609] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [374.963723] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [374.963837] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193

<7> [374.963988] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [374.969118] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [374.969271] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [374.974345] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [374.975628] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [374.975676] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:433] is removed

<7> [374.975710] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [374.975834] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [374.975922] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [374.976056] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.976191] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.976347] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [374.976517] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [374.976752] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [374.976958] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [374.977073] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [374.977187] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [374.977302] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [374.977722] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [374.992032] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [374.992330] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [374.992559] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [374.992687] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [374.992795] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [374.992902] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [374.993004] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [374.993128] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [374.993403] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [374.993539] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [374.993635] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [374.993730] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [374.993825] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [374.993916] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [374.994020] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [374.994172] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [374.994339] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [374.994486] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [374.994635] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [374.994774] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [374.994967] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [375.007608] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.008938] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [375.009037] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:434] is removed

<7> [375.009110] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.009450] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [375.009687] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.009890] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.009973] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.010057] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.010165] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.010334] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.010484] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.010627] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.010775] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.010921] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.011370] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.027275] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [375.027550] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [375.027855] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [375.028040] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.028199] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.028381] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [375.028536] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [375.028717] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [375.028968] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [375.029197] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [375.029435] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.029651] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.029859] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [375.030125] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [375.040992] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.043684] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [375.043823] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:433] is removed

<7> [375.043901] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.044223] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [375.044478] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.044671] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.044852] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.045029] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.045223] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.045535] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.045791] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.046090] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.046340] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.046568] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.047157] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.058729] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [375.058950] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [375.059301] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [375.059547] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.059769] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.059976] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [375.060170] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [375.060489] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [375.060786] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [375.061034] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [375.061286] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.061529] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.061762] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [375.062043] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [375.074325] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.075987] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [375.076096] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:434] is removed

<7> [375.076166] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.076714] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [375.077012] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.077243] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.077467] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.077692] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.077899] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.078168] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.078470] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.078722] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.078966] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.079207] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.079740] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.093148] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [375.093378] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [375.093705] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [375.093930] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.094137] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.094405] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [375.094611] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [375.094875] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [375.095163] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400

<7> [375.095472] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400

<7> [375.095726] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [375.096021] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [375.096273] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193

<7> [375.096562] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [375.107676] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.109610] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [375.109725] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:433] is removed

<7> [375.109801] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.110129] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [375.110395] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.110588] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.110775] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.110972] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.111178] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.111432] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.111675] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.111911] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.112131] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.112397] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.112918] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.131494] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [375.131658] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [375.131870] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [375.132018] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.132178] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.132310] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [375.132435] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [375.132571] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [375.132751] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [375.132920] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [375.133081] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [375.133263] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [375.133431] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [375.133636] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [375.140993] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.142670] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [375.142735] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:433] is removed

<7> [375.142779] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.143095] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [375.143525] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.143844] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.144020] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.144244] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.144416] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.144672] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.144897] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.145108] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.145342] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.145539] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.145987] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.164701] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [375.164963] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [375.165330] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B]

<7> [375.165648] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408

<7> [375.165874] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643

<7> [375.166088] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.166339] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.166534] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [375.166761] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [375.166986] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.167176] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.167351] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [375.167507] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [375.167685] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2

<7> [375.167925] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1948 qgv_peak_bw: 38400

<7> [375.168156] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1948 qgv_peak_bw: 38400

<7> [375.168378] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1948 qgv_peak_bw: 38400

<7> [375.168589] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1948 qgv_peak_bw: 38400

<7> [375.168838] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1948

<7> [375.169102] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [375.174250] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.175545] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [375.175592] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:433] is removed

<7> [375.175631] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.175764] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 1408) -> ( 0 - 0), size 1408 -> 0

<7> [375.175863] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1408 - 4051) -> ( 0 - 0), size 2643 -> 0

<7> [375.176221] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.176563] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.176870] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.176966] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.177049] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.177151] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.177231] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.177315] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.177416] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.177558] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.177679] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.177795] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.177909] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.178018] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.178321] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.201147] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [375.201359] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [375.201688] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B]

<7> [375.201961] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456

<7> [375.202204] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595

<7> [375.202403] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.202587] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.202765] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [375.202963] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [375.203171] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.203324] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.203475] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [375.203630] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [375.203806] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2

<7> [375.204043] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3895 qgv_peak_bw: 38400

<7> [375.204310] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3895 qgv_peak_bw: 38400

<7> [375.204527] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3895 qgv_peak_bw: 38400

<7> [375.204731] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3895 qgv_peak_bw: 38400

<7> [375.204923] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3895

<7> [375.205179] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [375.208095] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [375.208658] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [375.208820] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [375.209798] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [375.209918] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [375.224289] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.226143] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [375.226259] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:433] is removed

<7> [375.226344] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.226775] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 1456) -> ( 0 - 0), size 1456 -> 0

<7> [375.227097] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1456 - 4051) -> ( 0 - 0), size 2595 -> 0

<7> [375.227317] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.227520] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.227713] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.227908] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.228120] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.228289] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.228449] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.228649] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.228845] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.229111] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.229356] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.229604] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.229825] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.230056] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.230610] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.251895] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [375.252128] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [375.252403] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [375.252617] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.252793] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.252961] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [375.253166] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [375.253345] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [375.253580] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [375.253798] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [375.254010] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.254207] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.254390] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [375.254654] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [375.274281] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.276258] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [375.276373] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:433] is removed

<7> [375.276450] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.276907] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [375.277260] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.277489] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.277711] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.277952] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.278241] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.278543] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.278838] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.279144] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.279412] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.279708] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.280322] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.304868] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [375.305081] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [375.305337] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [375.305511] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.305671] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.305826] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [375.306000] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [375.306162] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [375.306462] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [375.306610] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [375.306736] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.306860] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.306998] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [375.307114] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [375.307234] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [375.307430] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [375.307592] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [375.307749] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.307902] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.308065] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [375.308248] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [375.308983] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [375.309514] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [375.309676] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [375.311446] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [375.311561] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [375.324272] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.326118] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [375.326215] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:433] is removed

<7> [375.326277] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.326665] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [375.326975] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.327166] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.327341] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.327533] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.327719] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.327986] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.328221] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.328473] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.328689] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.328896] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.329412] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.355069] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [375.355240] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [375.355504] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [375.355685] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.355854] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.356075] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [375.356233] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [375.356414] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [375.356623] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [375.356828] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [375.357041] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.357219] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.357392] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [375.357601] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [375.358933] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [375.359443] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [375.359656] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [375.360808] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [375.360962] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [375.374265] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.375953] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [375.376060] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:433] is removed

<7> [375.376127] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.376556] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [375.376919] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.377110] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.377288] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.377477] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.377660] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.377924] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.378161] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.378387] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.378598] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.378840] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.379391] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.408924] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [375.409207] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [375.409388] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [375.413522] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [375.413649] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [375.413779] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [375.413874] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.413963] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.414052] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [375.414132] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [375.414210] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [375.414302] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400

<7> [375.414392] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400

<7> [375.414483] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [375.414588] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [375.414699] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193

<7> [375.414851] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [375.420301] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [375.420421] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [375.424246] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.425466] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [375.425501] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:433] is removed

<7> [375.425529] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.425617] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [375.425687] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.425754] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.425836] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.425921] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.426023] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.426185] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.426347] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.426482] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.426613] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.426744] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.427079] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.441477] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [375.441629] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [375.441844] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [375.441989] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.442115] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.442234] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [375.442349] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [375.442487] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [375.442662] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [375.442838] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [375.442987] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [375.443129] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [375.443266] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [375.443454] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [375.457564] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.458787] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [375.458822] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:434] is removed

<7> [375.458849] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.459159] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [375.459448] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.459724] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.459898] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.460013] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.460139] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.460305] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.460457] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.460586] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.460716] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.460881] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.461220] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.476158] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [375.476363] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [375.476672] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [375.477003] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.477206] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.477398] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [375.477583] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [375.477856] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [375.478112] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [375.478360] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [375.478584] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.478813] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.479086] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [375.479375] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [375.490914] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.492444] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [375.492511] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [375.492555] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.492840] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [375.493050] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.493225] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.493376] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.493533] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.493688] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.493924] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.494120] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.494308] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.494494] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.494677] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.495160] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.508776] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [375.508963] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [375.509229] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [375.509428] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.509617] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.509845] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [375.510024] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [375.510271] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [375.510543] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [375.510804] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [375.511042] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.511260] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.511508] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [375.511800] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [375.524246] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.525838] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [375.525904] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:434] is removed

<7> [375.525977] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.526453] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [375.526896] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.527097] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.527286] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.527499] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.527727] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.528022] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.528264] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.528514] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.528766] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.528988] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.529511] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.542827] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [375.543029] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [375.543342] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [375.543578] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.543848] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.544059] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [375.544297] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [375.544529] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [375.544860] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400

<7> [375.545136] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400

<7> [375.545397] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [375.545700] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [375.545946] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193

<7> [375.546243] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [375.557568] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.559491] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [375.559613] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [375.559714] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.560030] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [375.560218] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.560393] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.560561] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.560831] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.561014] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.561245] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.561462] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.561682] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.561888] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.562088] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.562584] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.581523] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [375.581730] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [375.581942] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [375.582103] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.582239] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.582369] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [375.582494] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [375.582663] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [375.582849] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [375.583019] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [375.583193] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [375.583363] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [375.583535] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [375.583764] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [375.590861] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.592636] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [375.592695] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [375.592734] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.592947] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [375.593280] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.593600] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.593954] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.594118] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.594331] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.594582] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.594839] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.595063] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.595272] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.595477] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.596000] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.614242] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [375.614472] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [375.614912] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [375.615239] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B]

<7> [375.615552] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408

<7> [375.615824] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643

<7> [375.616039] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.616246] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.616440] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [375.616644] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [375.616826] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.617028] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.617222] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [375.617398] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [375.617580] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2

<7> [375.617931] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [375.618096] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B]

<7> [375.618275] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408

<7> [375.618420] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643

<7> [375.618557] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.618725] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.618862] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [375.618995] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [375.619125] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.619272] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.619395] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [375.619518] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [375.619667] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2

<7> [375.619860] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1948 qgv_peak_bw: 38400

<7> [375.620038] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1948 qgv_peak_bw: 38400

<7> [375.620206] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1948 qgv_peak_bw: 38400

<7> [375.620370] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1948 qgv_peak_bw: 38400

<7> [375.620556] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1948

<7> [375.620809] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [375.624291] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.625499] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [375.625532] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [375.625560] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.625697] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 1408) -> ( 0 - 0), size 1408 -> 0

<7> [375.625785] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1408 - 4051) -> ( 0 - 0), size 2643 -> 0

<7> [375.625865] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.625962] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.626187] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.626420] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.626682] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.626892] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.626957] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.627026] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.627108] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.627215] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.627311] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.627406] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.627498] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.627592] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.627869] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.646630] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [375.646756] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [375.646931] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B]

<7> [375.647106] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456

<7> [375.647235] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595

<7> [375.647352] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.647466] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.647607] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [375.647721] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [375.647833] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.647941] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.648044] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [375.648147] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [375.648266] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2

<7> [375.648500] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [375.648631] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B]

<7> [375.648760] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456

<7> [375.648859] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595

<7> [375.648953] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.649045] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.649135] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [375.649223] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [375.649309] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.649391] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.649472] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [375.649561] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [375.649649] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2

<7> [375.649839] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [375.649928] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B]

<7> [375.650023] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456

<7> [375.650102] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595

<7> [375.650178] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.650249] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.650322] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [375.650395] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [375.650466] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.650535] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.650630] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [375.650700] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [375.650772] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2

<7> [375.650890] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3895 qgv_peak_bw: 38400

<7> [375.651002] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3895 qgv_peak_bw: 38400

<7> [375.651110] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3895 qgv_peak_bw: 38400

<7> [375.651217] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3895 qgv_peak_bw: 38400

<7> [375.651320] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3895

<7> [375.651453] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [375.657638] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.658828] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [375.658879] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [375.658918] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.659119] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 1456) -> ( 0 - 0), size 1456 -> 0

<7> [375.659259] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1456 - 4051) -> ( 0 - 0), size 2595 -> 0

<7> [375.659382] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.659501] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.659691] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.659830] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.659914] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.659969] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.660023] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.660081] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.660149] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.660244] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.660337] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.660420] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.660505] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.660616] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.660893] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.681366] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [375.681463] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [375.681646] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [375.681749] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.681844] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.681936] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [375.682025] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [375.682128] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [375.682276] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [375.682425] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [375.682570] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.682698] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.682830] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [375.682987] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [375.690849] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.692434] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [375.692572] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [375.692643] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.692963] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [375.693101] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.693224] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.693330] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.693430] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.693568] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.693719] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.693863] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.694006] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.694140] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.694293] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.694651] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.717852] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [375.718000] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [375.718200] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [375.718341] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.718498] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.718625] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [375.718746] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [375.718892] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [375.719063] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [375.719224] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [375.719377] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.719544] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.719692] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [375.719873] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [375.724285] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.725488] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [375.725522] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [375.725547] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.725662] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [375.725742] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.725811] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.725876] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.725949] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.726081] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.726262] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.726437] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.726649] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.726821] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.726974] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.727197] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.749916] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [375.750066] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [375.750279] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [375.750459] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.750611] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.750753] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [375.750891] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [375.751047] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [375.751242] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [375.751428] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [375.751634] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.751811] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.751984] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [375.752191] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [375.757559] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.758799] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [375.758840] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [375.758869] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.759240] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [375.759635] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.759919] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.760006] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.760092] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.760187] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.760321] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.760450] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.760570] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.760686] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.760802] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.761069] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.791261] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [375.791343] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [375.791455] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [375.791496] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [375.791604] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.791622] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [375.791694] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.791737] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [375.791766] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [375.791835] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [375.791916] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [375.792008] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400

<7> [375.792098] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400

<7> [375.792185] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [375.792273] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [375.792360] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193

<7> [375.792489] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [375.797014] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [375.797127] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [375.807510] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.809064] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [375.809149] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [375.809205] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.809696] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [375.809925] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.810002] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.810073] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.810143] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.810225] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.810338] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.810471] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.810578] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.810670] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.810763] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.811012] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.825017] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [375.825196] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [375.825443] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [375.825607] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.825761] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.825903] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [375.826050] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [375.826209] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [375.826404] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [375.826591] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [375.826771] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [375.826944] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [375.827113] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [375.827365] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [375.840854] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.842550] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [375.842597] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:434] is removed

<7> [375.842630] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.842804] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [375.843082] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.843465] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.843820] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.843997] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.844138] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.844388] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.844601] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.844800] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.845000] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.845200] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.845714] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.859364] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [375.859626] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [375.860014] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [375.860296] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.860627] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.860876] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [375.861171] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [375.861494] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [375.861819] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [375.862130] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [375.862443] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.862784] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.863054] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [375.863392] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [375.874189] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.875798] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [375.875865] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [375.875929] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.876391] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [375.876758] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.876982] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.877166] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.877747] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.877944] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.878192] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.878488] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.878718] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.878944] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.879154] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.879669] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.892219] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [375.892494] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [375.892813] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [375.893065] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.893329] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.893559] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [375.893815] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [375.894051] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [375.894462] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [375.894671] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [375.894853] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.895025] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.895191] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [375.895394] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [375.895563] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [375.895809] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [375.896043] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [375.896267] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.896576] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.896800] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [375.897102] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [375.907474] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.908790] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [375.908831] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:434] is removed

<7> [375.908861] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.909247] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [375.909687] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.909917] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.910025] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.910146] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.910264] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.910451] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.910598] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.910740] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.910890] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.911026] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.911353] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.931065] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [375.931277] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [375.931606] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [375.931894] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.932125] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.932412] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [375.932616] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [375.932844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [375.933124] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [375.933416] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [375.933708] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [375.933946] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [375.934180] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [375.934490] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [375.940843] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.942616] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [375.942666] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [375.942699] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.942886] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [375.943150] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.943571] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.943921] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.944072] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.944252] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.944437] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.944617] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.944791] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.944957] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.945136] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.945542] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [375.971415] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [375.971603] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [375.971830] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [375.972002] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [375.972137] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [375.972293] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [375.972428] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [375.972596] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [375.972807] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [375.972984] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [375.973153] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.973341] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [375.973498] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [375.973691] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [375.975252] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [375.975828] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [375.976019] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [375.976908] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [375.977035] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [375.990861] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [375.992591] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [375.992655] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [375.992696] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [375.992930] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [375.993312] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [375.993579] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.993830] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.994042] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [375.994238] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [375.994474] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [375.994692] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [375.994904] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.995112] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [375.995362] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [375.995824] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [376.020772] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [376.020973] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [376.021295] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [376.021494] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [376.021671] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [376.021836] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [376.021994] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [376.022197] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [376.022425] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [376.022640] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [376.022847] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [376.023044] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [376.023252] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [376.023482] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [376.025240] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [376.025777] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [376.025994] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [376.026701] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [376.026843] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [376.040843] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [376.042595] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [376.042681] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [376.042736] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [376.043013] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [376.043261] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [376.043437] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.043592] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.043769] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.043954] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [376.044222] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [376.044427] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [376.044623] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [376.044815] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [376.045025] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [376.045501] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [376.070876] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [376.071079] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [376.071373] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [376.071548] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [376.071707] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [376.071856] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [376.071996] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [376.072177] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [376.072408] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [376.072597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [376.072773] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [376.072950] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [376.073165] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [376.073396] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [376.075164] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [376.075680] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [376.075854] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [376.076624] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [376.076752] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [376.090838] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [376.092612] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [376.092726] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [376.092796] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [376.093293] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [376.093693] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [376.093935] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.094128] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.094296] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.094511] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [376.094762] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [376.094993] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [376.095229] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [376.095439] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [376.095648] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [376.096202] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [376.108897] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [376.109232] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [376.109598] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [376.109871] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [376.110149] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [376.110373] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [376.110632] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [376.110903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [376.111242] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [376.111538] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [376.111825] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [376.112151] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [376.112424] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [376.112730] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [376.124147] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [376.125684] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [376.125752] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:434] is removed

<7> [376.125793] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [376.126223] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [376.126603] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [376.126888] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.127092] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.127265] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.127487] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [376.127747] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [376.127977] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [376.128220] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [376.128430] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [376.128636] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [376.129159] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [376.141864] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [376.142108] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [376.142442] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [376.142717] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [376.142957] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [376.143239] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [376.143473] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [376.143785] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [376.144115] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [376.144444] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [376.144745] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [376.145029] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [376.145398] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [376.145711] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [376.157519] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [376.159449] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [376.159562] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [376.159633] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [376.160001] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [376.160311] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [376.160514] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.160706] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.160888] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.161118] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [376.161387] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [376.161638] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [376.161922] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [376.162177] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [376.162402] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [376.162945] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [376.175431] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [376.175606] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [376.175848] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [376.176081] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [376.176275] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [376.176454] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [376.176656] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [376.176885] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [376.177169] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [376.177408] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [376.177642] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [376.177880] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [376.178115] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [376.178381] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [376.190796] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [376.192554] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [376.192660] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:434] is removed

<7> [376.192728] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [376.193107] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [376.193402] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [376.193639] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.193871] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.194120] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.194316] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [376.194617] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [376.194858] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [376.195101] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [376.195318] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [376.195563] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [376.196058] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [376.215270] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [376.215502] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [376.215850] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [376.216208] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [376.216454] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [376.216690] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [376.216946] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [376.217235] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [376.217696] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [376.217932] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [376.218170] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [376.218347] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [376.218520] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [376.218720] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [376.218917] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [376.219245] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [376.219514] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [376.219739] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [376.219950] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [376.220228] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [376.220486] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [376.224086] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [376.225373] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [376.225415] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [376.225447] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [376.225588] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [376.225700] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [376.225804] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.225904] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.226138] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.226491] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [376.226903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [376.227064] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [376.227207] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [376.227340] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [376.227468] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [376.227807] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [376.248565] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [376.248713] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [376.248903] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [376.249073] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [376.249203] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [376.249329] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [376.249452] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [376.249613] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [376.249823] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [376.250109] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [376.250364] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [376.250614] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [376.250913] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [376.251488] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [376.257434] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [376.258852] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [376.258971] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [376.259045] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [376.259471] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [376.259829] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [376.260082] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.260238] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.260377] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.260527] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [376.260753] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [376.261099] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [376.261512] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [376.261889] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [376.262104] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [376.262646] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [376.281733] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [376.281843] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [376.282010] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [376.282104] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [376.282191] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [376.282277] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [376.282360] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [376.282453] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [376.282589] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [376.282729] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [376.282848] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [376.282980] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [376.283100] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [376.283247] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [376.290756] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [376.291923] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [376.292011] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [376.292059] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [376.292319] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [376.292530] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [376.292728] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.292935] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.293023] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.293117] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [376.293224] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [376.293311] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [376.293397] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [376.293481] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [376.293564] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [376.293774] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [376.316743] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [376.316859] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [376.317055] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [376.317176] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [376.317288] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [376.317395] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [376.317497] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [376.317612] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [376.317760] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [376.317910] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [376.318047] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [376.318178] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [376.318304] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [376.318459] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [376.324113] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [376.325430] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [376.325495] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [376.325538] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [376.325734] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [376.325928] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [376.326067] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.326196] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.326323] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [376.326447] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [376.326613] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [376.326776] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [376.326970] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [376.327075] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [376.327176] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [376.327428] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<6> [376.341767] [IGT] kms_plane_scaling: finished subtest pipe-B, SUCCESS

Results for igt@kms_plane_scaling@plane-downscale-factor-0-75-with-pixel-format@pipe-b