Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.02 seconds
Igt-Version 
IGT-Version: 2.4-g63a08403d (x86_64) (Linux: 7.0.0-lgci-xe-xe-4912-7f72587254d9c0142-debug+ x86_64)
Out 
Using IGT_SRANDOM=1776336943 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.022s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.022s)
Dmesg
<6> [804.395564] Console: switching to colour dummy device 80x25
<6> [804.395634] [IGT] kms_force_connector_basic: executing
<7> [804.398621] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:390:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [804.398635] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [804.398643] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [804.402832] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected
<7> [804.402884] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [804.402888] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [804.407069] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected
<7> [804.407110] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [804.407114] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [804.408013] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [804.408190] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [804.408331] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [804.411272] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected
<6> [804.411386] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [804.411834] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:390:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [804.411843] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [804.411847] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [804.412187] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [804.412295] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [804.412539] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [804.412640] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [804.412653] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [804.412750] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [804.415092] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [804.415101] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [804.415207] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] status updated from disconnected to connected
<7> [804.415281] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes:
<7> [804.415285] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [804.415290] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [804.415294] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [804.415297] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [804.415301] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [804.415324] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [804.415439] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [804.415501] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [804.415505] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [804.415772] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [804.415876] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [804.416144] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [804.416255] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [804.416265] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [804.416362] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [804.418684] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [804.418698] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [804.418880] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes:
<7> [804.418885] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [804.418889] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [804.418892] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [804.418895] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [804.418898] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [804.419086] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:390:HDMI-A-1] EDID override set
<7> [804.419107] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [804.419111] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [804.419248] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor IGT
<7> [804.419252] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 24, SAD count 0
<7> [804.419409] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [804.419513] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [804.419758] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [804.419862] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [804.420003] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [804.420013] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [804.420021] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes:
<7> [804.420026] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [804.420030] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [804.420033] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [804.420036] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [804.420040] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [804.420043] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [804.420183] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:390:HDMI-A-1] EDID override set
<7> [804.420211] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [804.420215] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [804.420357] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor IGT
<7> [804.420360] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 24, SAD count 0
<7> [804.420363] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:390:HDMI-A-1] EDID changed, epoch counter 4
<7> [804.420524] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [804.420628] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [804.420873] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [804.420982] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [804.421081] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [804.421089] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes:
<7> [804.421093] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [804.421096] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [804.421100] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [804.421103] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [804.421106] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [804.421206] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:390:HDMI-A-1] EDID override reset
<7> [804.421228] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [804.421232] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [804.421493] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [804.421595] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [804.421837] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [804.421933] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [804.421940] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [804.422068] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [804.424367] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [804.424375] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [804.424474] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:390:HDMI-A-1] EDID changed, epoch counter 5
<7> [804.424533] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [804.424541] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [804.424548] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes:
<7> [804.424552] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [804.424555] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [804.424559] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [804.424562] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [804.424565] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [804.424774] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:390:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [804.424781] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [804.424787] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [804.428951] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] status updated from connected to disconnected
<7> [804.428966] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected
<7> [804.428988] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [804.429085] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [804.429183] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [804.429188] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [804.433384] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected
<6> [804.433486] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [804.434241] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [804.434727] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [804.434999] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [804.435006] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [804.435064] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [804.435071] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [804.439228] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected
<7> [804.439234] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]
<7> [804.439238] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]
<7> [804.439391] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected
<7> [804.439396] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2]
<7> [804.439399] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:409:DP-2]
<7> [804.439537] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] disconnected
<7> [804.439541] xe 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [804.439545] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:390:HDMI-A-1] enabled? no
<7> [804.439549] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no
<7> [804.439551] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:409:DP-2] enabled? no
<7> [804.439573] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [804.439586] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config
<7> [804.440001] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [804.440825] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:390:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [804.440836] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [804.440842] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [804.445074] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected
<7> [804.445120] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [804.445124] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [804.449260] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected
<7> [804.449418] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:390:HDMI-A-1] EDID override reset
<7> [804.449446] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]
<7> [804.449450] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:390:HDMI-A-1]
<7> [804.453619] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected
<7> [804.453732] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:400:DP-1] EDID override reset
<7> [804.453748] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]
<7> [804.453752] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]
<7> [804.453923] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected
<7> [804.454035] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:409:DP-2] EDID override reset
<7> [804.454052] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2]
<7> [804.454056] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:409:DP-2]
<7> [804.454205] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] disconnected
<7> [804.455099] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [804.455270] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [804.456627] Console: switching to colour frame buffer device 128x48
Created at 2026-04-16 11:23:44