Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.02 seconds
Igt-Version 
IGT-Version: 2.4-g63a08403d (x86_64) (Linux: 7.0.0-lgci-xe-xe-4911-7e772296e93b337ca-debug+ x86_64)
Out 
Using IGT_SRANDOM=1776330209 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.022s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.022s)
Dmesg
<7> [805.868835] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [805.869222] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [805.869499] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<6> [805.904390] Console: switching to colour dummy device 80x25
<6> [805.904447] [IGT] kms_force_connector_basic: executing
<7> [805.907248] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:544:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [805.907259] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [805.907266] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [805.911502] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<7> [805.911531] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [805.911535] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [805.915913] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<7> [805.915933] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [805.915937] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [805.920106] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<6> [805.920169] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [805.920470] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:544:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [805.920477] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [805.920481] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [805.920770] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [805.920876] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [805.921119] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [805.921217] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [805.921231] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [805.921327] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [805.923587] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [805.923597] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [805.923715] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] status updated from disconnected to connected
<7> [805.923783] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] probed modes:
<7> [805.923787] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [805.923792] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [805.923796] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [805.923799] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [805.923802] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [805.923819] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [805.924562] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [805.924601] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [805.924607] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [805.924916] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [805.925028] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [805.925277] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [805.925378] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [805.925387] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [805.925487] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [805.927728] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [805.927737] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [805.927899] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] probed modes:
<7> [805.927903] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [805.927907] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [805.927911] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [805.927914] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [805.927917] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [805.928074] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:544:HDMI-A-1] EDID override set
<7> [805.928095] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [805.928099] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [805.928236] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:544:HDMI-A-1] ELD monitor IGT
<7> [805.928239] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:544:HDMI-A-1] ELD size 24, SAD count 0
<7> [805.928394] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [805.928498] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [805.928748] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [805.928845] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [805.928962] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [805.928972] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [805.928979] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] probed modes:
<7> [805.928983] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [805.928986] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [805.928989] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [805.928993] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [805.928996] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [805.928999] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [805.929107] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:544:HDMI-A-1] EDID override set
<7> [805.929128] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [805.929132] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [805.929263] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:544:HDMI-A-1] ELD monitor IGT
<7> [805.929266] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:544:HDMI-A-1] ELD size 24, SAD count 0
<7> [805.929269] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:544:HDMI-A-1] EDID changed, epoch counter 4
<7> [805.929428] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [805.929530] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [805.929769] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [805.929866] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [805.929963] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [805.929971] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] probed modes:
<7> [805.929974] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [805.929977] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [805.929981] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [805.929984] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [805.929988] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [805.930079] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:544:HDMI-A-1] EDID override reset
<7> [805.930099] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [805.930103] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [805.930361] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [805.930456] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [805.930699] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [805.930794] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [805.930802] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [805.930895] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [805.933128] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [805.933136] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [805.933230] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:544:HDMI-A-1] EDID changed, epoch counter 5
<7> [805.933283] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [805.933290] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [805.933297] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] probed modes:
<7> [805.933300] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [805.933303] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [805.933307] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [805.933310] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [805.933313] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [805.933444] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:544:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [805.933449] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [805.933453] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [805.937627] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] status updated from connected to disconnected
<7> [805.937638] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<7> [805.937694] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [805.937698] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [805.937856] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [805.937933] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [805.941880] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<6> [805.941952] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [805.942644] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [805.943138] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [805.943369] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [805.943374] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [805.943420] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:DP-1]
<7> [805.943426] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:DP-1]
<7> [805.943583] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:DP-1] disconnected
<7> [805.943589] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2]
<7> [805.943593] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]
<7> [805.944092] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2] disconnected
<7> [805.944097] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-3]
<7> [805.944101] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:535:DP-3]
<7> [805.944245] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-3] disconnected
<7> [805.944249] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [805.944252] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [805.948426] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<7> [805.948431] xe 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [805.948434] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:512:DP-1] enabled? no
<7> [805.948438] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-2] enabled? no
<7> [805.948441] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:535:DP-3] enabled? no
<7> [805.948444] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:544:HDMI-A-1] enabled? no
<7> [805.948463] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [805.948471] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config
<7> [805.948892] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [805.949544] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:512:DP-1] EDID override reset
<7> [805.949561] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:DP-1]
<7> [805.949565] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:DP-1]
<7> [805.949740] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:DP-1] disconnected
<7> [805.949836] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:526:DP-2] EDID override reset
<7> [805.949851] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2]
<7> [805.949855] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]
<7> [805.950006] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2] disconnected
<7> [805.950085] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:535:DP-3] EDID override reset
<7> [805.950098] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-3]
<7> [805.950102] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:535:DP-3]
<7> [805.950246] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-3] disconnected
<7> [805.950376] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:544:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [805.950381] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [805.950385] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [805.954535] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<7> [805.954559] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [805.954562] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [805.958764] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<7> [805.958845] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:544:HDMI-A-1] EDID override reset
<7> [805.958859] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1]
<7> [805.958863] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:544:HDMI-A-1]
<7> [805.963044] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-1] disconnected
<7> [805.963884] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [805.964024] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [805.965134] Console: switching to colour frame buffer device 128x48
Created at 2026-04-16 09:30:44