igt@kms_plane_scaling@plane-downscale-factor-0-75-with-pixel-format@pipe-b on shard-lnl@xe-4909-137513b61b4f187957d0c0f44c63c8549893f970 Test details

Detail	Value
Duration	2.98 seconds
Hostname	shard-lnl-1
Igt-Version	IGT-Version: 2.4-g63a08403d (x86_64) (Linux: 7.0.0-lgci-xe-xe-4909-137513b61b4f18795-debug+ x86_64)
Out	Starting dynamic subtest: pipe-B Trying on eDP-1 Dynamic subtest pipe-B: SUCCESS (2.984s)
Err	Starting dynamic subtest: pipe-B Dynamic subtest pipe-B: SUCCESS (2.984s)
Dmesg	<6> [376.826659] [IGT] kms_plane_scaling: starting dynamic subtest pipe-B <7> [376.830592] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [376.832144] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [376.832463] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:270:pipe B] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [376.832753] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000 <7> [376.833061] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [376.833346] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:270:pipe B] <7> [376.833625] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [376.833902] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [376.834237] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [376.834508] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [376.834763] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0) <7> [376.835023] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [376.835266] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [376.835499] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0) <7> [376.835726] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0) <7> [376.835949] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0) <7> [376.836202] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0) <7> [376.836408] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0) <7> [376.836610] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0) <7> [376.836802] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [376.837013] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [376.837192] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [376.837368] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0) <7> [376.837541] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0) <7> [376.837706] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0) <7> [376.837902] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0) <7> [376.838073] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0) <7> [376.838221] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0) <7> [376.838368] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0) <7> [376.838516] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0) <7> [376.838658] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0) <7> [376.838812] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [376.838993] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [376.839127] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [376.839275] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0) <7> [376.839425] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0) <7> [376.839553] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0) <7> [376.839672] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [376.839804] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [376.839943] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [376.840057] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [376.840167] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0) <7> [376.840275] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0) <7> [376.840381] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 432000, found 0) <7> [376.840488] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [376.840593] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.enable (expected no, found yes) <7> [376.840693] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [376.840798] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1) <7> [376.840896] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in lane_count (expected 0, found 4) <7> [376.840993] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288) <7> [376.841088] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [376.841186] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [376.841282] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880) <7> [376.841377] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040) <7> [376.841471] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880) <7> [376.841563] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040) <7> [376.841654] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928) <7> [376.841743] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960) <7> [376.841908] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [376.842016] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [376.842067] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [376.842122] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [376.842173] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [376.842216] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [376.842298] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809) <7> [376.842380] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906) <7> [376.842462] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906) <7> [376.842542] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880) <7> [376.842620] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040) <7> [376.842699] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880) <7> [376.842966] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040) <7> [376.843059] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928) <7> [376.843137] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960) <7> [376.843209] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [376.843280] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [376.843352] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [376.843422] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809) <7> [376.843493] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906) <7> [376.843563] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906) <7> [376.843634] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [376.843712] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [376.843791] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [376.843868] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [376.843944] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710) <7> [376.844019] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710) <7> [376.844090] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in port_clock (expected 0, found 432000) <7> [376.844160] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] fastset requirement not met, forcing full modeset <7> [376.844234] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0 <7> [376.844326] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [376.844408] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x2 <7> [376.844472] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:270:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x1 -> 0x2 <7> [376.844535] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0 <7> [376.844595] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [376.844654] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:264:cursor B] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7> [376.844731] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [376.844795] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [376.844858] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [376.844925] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [376.845004] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [376.845097] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [376.845184] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [376.845266] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [376.845348] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [376.845428] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [376.845521] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min cdclk: 309076 kHz -> 0 kHz <7> [376.845602] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:270:pipe B] min cdclk: 0 kHz -> 309076 kHz <7> [376.845710] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 77269 kHz -> 19318 kHz <7> [376.845825] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:270:pipe B] allocated DPLL 0 <7> [376.845925] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:270:pipe B] reserving DPLL 0 <7> [376.846018] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [376.846086] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: no [modeset] <7> [376.846175] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [376.846263] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [376.846350] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [376.846435] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [376.846521] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [376.846605] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [376.846690] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: yes [modeset] <7> [376.846775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [376.846860] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0 <7> [376.846940] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [376.847016] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [376.847092] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [376.847167] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [376.847251] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7> [376.847333] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [376.847416] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7> [376.847499] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [376.847587] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [376.847670] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7> [376.847753] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [376.847835] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [376.847918] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [376.847993] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [376.848068] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [376.848143] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [376.848218] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [376.848292] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [376.848372] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [376.848456] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7> [376.848545] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7> [376.848629] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [376.848712] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [376.848794] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [376.848876] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [376.848959] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [376.849040] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [376.849121] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 309076, min voltage level 0 <7> [376.849196] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7> [376.849270] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x40, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [376.849343] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0 <7> [376.849415] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [376.849489] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [376.849581] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [376.849661] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [376.849739] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no, <7> [376.849818] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7> [376.849896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [376.849973] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [376.850050] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [376.850128] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [376.850205] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [376.850282] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [376.850360] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [376.850439] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [376.850546] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [376.850619] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [376.850691] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [376.850763] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [376.850834] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [376.850906] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [376.850978] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [376.851052] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [376.851126] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [376.851199] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [376.851272] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [376.851344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:154:plane 1B] fb: [FB:432] 2880x1800 format = RG16 little-endian (0x36314752) modifier = 0x0, visible: yes <7> [376.851417] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0 <7> [376.851505] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2160x1350+0+0 <7> [376.851586] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:184:plane 2B] fb: [NOFB], visible: no <7> [376.851665] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:214:plane 3B] fb: [NOFB], visible: no <7> [376.851745] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:244:plane 4B] fb: [NOFB], visible: no <7> [376.851823] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:254:plane 5B] fb: [NOFB], visible: no <7> [376.851901] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:264:cursor B] fb: [NOFB], visible: no <7> [376.853353] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [376.853472] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [376.853630] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [376.853767] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [376.853915] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000) <7> [376.854083] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [376.854168] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [377.051943] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0 <7> [377.052566] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [377.059266] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off <7> [377.059617] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time <7> [377.060000] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [377.111049] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [377.111374] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A] <7> [377.112062] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [377.112334] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short <7> [377.112723] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A] <7> [377.113482] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [377.113895] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [377.114282] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A] <7> [377.114635] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1] <7> [377.114889] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A] <7> [377.115136] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B] <7> [377.115411] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C] <7> [377.115718] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2] <7> [377.115973] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A] <7> [377.116227] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B] <7> [377.116543] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C] <7> [377.116816] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3] <7> [377.117086] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A] <7> [377.117379] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B] <7> [377.117626] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C] <7> [377.117875] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:402:DP-1] <7> [377.118137] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:414:DP-2] <7> [377.118420] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:422:DP-3] <7> [377.118764] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 6 (mbus joined: yes) <7> [377.119042] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [377.120324] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:270:pipe B] <7> [377.120701] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [377.122973] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on <7> [377.123254] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (488 ms remaining) <7> [377.150781] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [377.151102] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long <7> [377.151371] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [377.151680] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A] <7> [377.604731] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [377.724944] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [377.725306] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on <7> [377.725576] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7> [377.762165] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [377.762481] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long <7> [377.762767] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7> [377.763380] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A] <7> [377.932172] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [377.932566] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on <7> [377.932826] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7> [377.934759] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [377.936209] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [377.936915] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7> [377.937916] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [377.939182] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [377.940260] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK <7> [377.940598] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7> [377.942066] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [377.942419] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7> [377.943245] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe B <7> [377.943730] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [377.944118] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe B <7> [377.944613] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 13892 <7> [377.960672] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [377.961013] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000) <7> [377.961401] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A] <7> [377.961731] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [377.963149] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1] <7> [377.963433] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:270:pipe B] <7> [377.966922] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe B <7> [377.967174] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [377.967241] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [377.967306] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [377.967619] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [377.967842] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [377.968027] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [377.968209] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [377.968469] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [377.968695] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [377.968964] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [377.969229] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [377.969518] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [377.969774] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [377.970055] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [377.970790] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [377.978330] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [377.978535] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [377.978870] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [377.979165] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [377.979427] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [377.979676] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [377.979925] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [377.980177] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [377.980509] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [377.980779] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [377.981050] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [377.981367] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [377.981655] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [377.981974] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 19318 kHz -> 38635 kHz <7> [377.982236] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [377.993814] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [377.995417] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [377.995489] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:434] is removed <7> [377.995537] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [377.995864] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [377.996088] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [377.996299] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [377.996536] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [377.996743] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [377.996968] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [377.997258] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [377.997561] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [377.997844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [377.998120] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [377.998414] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [377.999013] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.011641] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [378.011836] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [378.012145] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.012388] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.012585] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.012770] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [378.012968] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [378.013198] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [378.013459] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [378.013725] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [378.013988] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [378.014275] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [378.014584] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [378.014936] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [378.027150] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.028711] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [378.028779] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [378.028820] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.029069] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [378.029276] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.029474] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.029667] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.029971] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.030184] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.030464] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.030723] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.030970] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.031212] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.031474] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.032098] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.045554] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [378.046322] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [378.046853] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.047187] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.047451] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.047648] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [378.047949] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [378.048173] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [378.048497] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400 <7> [378.048767] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400 <7> [378.049031] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [378.049315] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [378.049572] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193 <7> [378.049886] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 38635 kHz -> 77269 kHz <7> [378.050148] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [378.060472] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.062003] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [378.062072] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:434] is removed <7> [378.062118] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.062370] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [378.062627] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.062830] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.063095] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.063286] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.063540] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.063800] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.064090] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.064331] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.064599] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.064841] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.065328] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.084405] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [378.084534] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [378.084732] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.084883] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.085025] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.085158] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [378.085286] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [378.085483] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [378.085655] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [378.085820] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [378.085985] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [378.086150] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [378.086335] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [378.086545] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [378.093808] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.095357] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [378.095424] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [378.095467] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.095759] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [378.095966] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.096249] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.096457] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.096645] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.096842] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.097116] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.097369] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.097656] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.097889] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.098124] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.098651] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.116837] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [378.117030] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [378.117293] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B] <7> [378.117608] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408 <7> [378.117820] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643 <7> [378.118024] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.118218] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.118412] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [378.118635] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [378.118811] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.118979] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.119138] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [378.119294] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [378.119513] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2 <7> [378.119740] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1948 qgv_peak_bw: 38400 <7> [378.119960] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1948 qgv_peak_bw: 38400 <7> [378.120167] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1948 qgv_peak_bw: 38400 <7> [378.120405] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1948 qgv_peak_bw: 38400 <7> [378.120663] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1948 <7> [378.120898] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [378.127115] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.128467] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [378.128516] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [378.128554] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.128805] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 1408) -> ( 0 - 0), size 1408 -> 0 <7> [378.129013] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1408 - 4051) -> ( 0 - 0), size 2643 -> 0 <7> [378.129210] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.129460] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.129591] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.129724] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.129842] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.129953] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.130064] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.130170] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.130325] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.130486] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.130640] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.130788] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.130934] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.131076] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.131422] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.153692] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [378.153902] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [378.154189] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B] <7> [378.154445] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456 <7> [378.154758] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595 <7> [378.154950] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.155124] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.155296] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [378.155494] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [378.155698] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.155859] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.156016] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [378.156189] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [378.156384] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2 <7> [378.156684] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [378.156844] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B] <7> [378.157014] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456 <7> [378.157150] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595 <7> [378.157284] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.157417] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.157555] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [378.157679] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [378.157815] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.157951] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.158065] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [378.158189] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [378.158308] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2 <7> [378.158472] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3895 qgv_peak_bw: 38400 <7> [378.158688] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3895 qgv_peak_bw: 38400 <7> [378.158864] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3895 qgv_peak_bw: 38400 <7> [378.159033] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3895 qgv_peak_bw: 38400 <7> [378.159173] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3895 <7> [378.159364] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [378.160519] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [378.161124] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [378.161306] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [378.163786] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [378.163890] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [378.177105] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.178580] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [378.178642] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [378.178691] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.178933] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 1456) -> ( 0 - 0), size 1456 -> 0 <7> [378.179204] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1456 - 4051) -> ( 0 - 0), size 2595 -> 0 <7> [378.179391] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.179557] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.179706] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.179866] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.180050] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.180184] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.180315] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.180447] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.180594] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.180782] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.180974] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.181152] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.181321] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.181491] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.181915] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.204075] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [378.204225] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [378.204455] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.204648] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.204802] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.204950] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [378.205112] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [378.205285] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [378.205577] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [378.205723] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.205870] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.206012] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.206135] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [378.206250] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [378.206405] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [378.206581] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [378.206754] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [378.206920] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [378.207080] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [378.207231] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [378.207434] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [378.227106] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.228642] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [378.228712] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [378.228756] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.229095] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [378.229319] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.229540] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.229786] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.230002] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.230295] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.230608] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.230929] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.231212] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.231487] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.231785] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.232399] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.256731] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [378.256908] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [378.257201] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.257384] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.257554] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.257717] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [378.257889] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [378.258073] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [378.258284] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [378.258486] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [378.258678] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [378.258879] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [378.259067] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [378.259284] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [378.261115] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [378.261650] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [378.261864] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [378.262446] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [378.262593] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [378.277112] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.278621] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [378.278689] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [378.278732] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.278989] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [378.279196] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.279397] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.279647] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.279883] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.280146] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.280434] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.280766] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.281036] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.281297] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.281628] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.282165] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.306545] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [378.306710] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [378.306994] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.307178] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.307347] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.307513] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [378.307667] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [378.307858] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [378.308063] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [378.308263] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [378.308455] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [378.308634] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [378.308832] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [378.309037] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [378.310814] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [378.311357] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [378.311550] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [378.312210] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [378.312342] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [378.327099] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.328715] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [378.328786] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [378.328831] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.329102] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [378.329344] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.329559] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.329765] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.329994] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.330219] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.330545] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.330811] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.331096] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.331363] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.331603] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.332143] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.360574] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [378.360822] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [378.360999] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [378.364835] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [378.364927] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40 <7> [378.365057] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.365142] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.365215] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.365284] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [378.365352] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [378.365449] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [378.365550] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400 <7> [378.365645] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400 <7> [378.365738] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [378.365823] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [378.365908] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193 <7> [378.366014] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154 <7> [378.370422] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [378.370532] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [378.377102] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.378476] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [378.378524] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [378.378571] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.378834] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [378.379029] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.379262] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.379455] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.379603] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.379680] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.379776] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.379862] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.379947] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.380033] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.380136] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.380392] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.395138] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [378.395474] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [378.395720] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.395887] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.396028] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.396159] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [378.396285] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [378.396448] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [378.396653] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [378.396823] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [378.396983] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [378.397139] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [378.397315] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [378.397519] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [378.410389] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.411646] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [378.411702] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:434] is removed <7> [378.411739] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.411955] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [378.412138] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.412355] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.412523] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.412634] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.412764] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.412962] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.413138] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.413331] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.413500] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.413669] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.414070] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.428076] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [378.428257] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [378.428546] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.428791] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.429051] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.429254] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [378.429456] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [378.429674] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [378.429975] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [378.430242] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [378.430506] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [378.430763] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [378.431114] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [378.431422] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [378.443717] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.445223] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [378.445288] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [378.445331] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.445621] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [378.445881] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.446087] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.446291] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.446503] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.446701] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.447007] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.447256] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.447538] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.447799] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.448053] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.448692] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.461624] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [378.461799] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [378.462250] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.462756] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.463176] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.463362] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [378.463580] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [378.463800] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [378.464101] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [378.464354] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [378.464615] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [378.464873] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [378.465184] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [378.465489] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [378.477076] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.478572] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [378.478662] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:434] is removed <7> [378.478704] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.478947] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [378.479142] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.479329] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.479514] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.479776] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.479987] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.480255] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.480511] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.480851] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.481111] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.481367] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.481938] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.495431] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [378.495643] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [378.495925] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.496141] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.496397] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.496596] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [378.496823] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [378.497037] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [378.497339] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400 <7> [378.497608] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400 <7> [378.497873] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [378.498202] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [378.498486] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193 <7> [378.498800] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [378.510414] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.511917] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [378.511985] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [378.512028] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.512283] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [378.512488] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.512683] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.512930] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.513118] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.513324] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.513596] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.513892] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.514158] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.514472] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.514785] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.515365] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.534423] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [378.534564] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [378.534780] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.534968] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.535120] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.535294] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [378.535437] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [378.535616] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [378.535861] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [378.536008] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.536140] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.536309] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.536437] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [378.536609] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [378.536755] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [378.536962] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [378.537182] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [378.537391] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [378.537597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [378.537818] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [378.538059] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [378.543712] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.544993] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [378.545035] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [378.545063] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.545224] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [378.545353] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.545474] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.545660] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.545885] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.546211] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.546526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.546700] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.546868] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.547051] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.547209] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.547573] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.566613] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [378.566802] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [378.567050] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B] <7> [378.567308] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408 <7> [378.567599] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643 <7> [378.567807] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.568011] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.568211] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [378.568484] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [378.568682] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.568895] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.569083] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [378.569260] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [378.569486] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2 <7> [378.569739] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1948 qgv_peak_bw: 38400 <7> [378.569972] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1948 qgv_peak_bw: 38400 <7> [378.570205] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1948 qgv_peak_bw: 38400 <7> [378.570457] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1948 qgv_peak_bw: 38400 <7> [378.570712] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1948 <7> [378.570982] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [378.577143] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.578480] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [378.578544] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [378.578596] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.578850] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 1408) -> ( 0 - 0), size 1408 -> 0 <7> [378.579064] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1408 - 4051) -> ( 0 - 0), size 2643 -> 0 <7> [378.579345] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.579555] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.579694] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.579814] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.579945] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.580074] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.580224] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.580334] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.580475] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.580664] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.580825] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.580976] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.581130] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.581275] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.581644] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.604296] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [378.604527] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [378.604768] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B] <7> [378.605008] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456 <7> [378.605219] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595 <7> [378.605386] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.605574] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.605729] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [378.605878] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [378.606047] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.606209] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.606350] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [378.606511] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [378.606664] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2 <7> [378.606856] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3895 qgv_peak_bw: 38400 <7> [378.607044] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3895 qgv_peak_bw: 38400 <7> [378.607226] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3895 qgv_peak_bw: 38400 <7> [378.607405] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3895 qgv_peak_bw: 38400 <7> [378.607647] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3895 <7> [378.607857] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [378.611407] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [378.612102] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [378.612233] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [378.612397] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [378.612503] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [378.627066] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.628690] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [378.628758] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [378.628809] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.629107] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 1456) -> ( 0 - 0), size 1456 -> 0 <7> [378.629314] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1456 - 4051) -> ( 0 - 0), size 2595 -> 0 <7> [378.629509] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.629699] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.629907] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.630089] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.630297] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.630485] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.630685] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.630861] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.631040] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.631276] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.631504] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.631723] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.632010] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.632215] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.632721] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.656203] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [378.656396] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [378.656675] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.656873] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.657051] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.657249] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [378.657419] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [378.657635] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [378.657874] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [378.658086] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [378.658321] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [378.658542] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [378.658736] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [378.658965] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [378.677035] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.678513] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [378.678578] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [378.678618] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.678906] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [378.679121] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.679306] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.679494] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.679767] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.679995] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.680265] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.680543] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.680855] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.681136] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.681432] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.682070] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.709783] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [378.709882] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [378.710077] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.710159] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.710232] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.710302] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [378.710371] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [378.710451] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [378.710555] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [378.710647] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [378.710734] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [378.710819] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [378.710924] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [378.710968] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [378.711037] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [378.711103] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [378.711253] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [378.713594] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [378.713695] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [378.727118] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.728544] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [378.728610] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:433] is removed <7> [378.728652] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.728892] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [378.729118] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.729301] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.729536] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.729677] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.729851] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.730064] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.730249] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.730442] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.730619] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.730788] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.731199] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.756269] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [378.756485] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [378.756782] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.756984] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.757168] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.757348] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [378.757522] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [378.757749] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [378.757988] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [378.758203] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [378.758413] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [378.758611] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [378.758829] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [378.759058] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [378.760674] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [378.761288] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [378.761481] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [378.762242] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [378.762412] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [378.777042] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.778644] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [378.778716] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:433] is removed <7> [378.778764] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.779015] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [378.779289] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.779488] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.779697] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.779920] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.780130] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.780429] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.780681] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.780920] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.781161] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.781395] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.781939] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.810542] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [378.810740] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [378.810853] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [378.812683] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [378.812777] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80 <7> [378.812900] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.812982] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.813052] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.813119] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [378.813181] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [378.813254] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [378.813365] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400 <7> [378.813491] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400 <7> [378.813610] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [378.813711] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [378.813810] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193 <7> [378.813927] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184 <7> [378.818490] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [378.818613] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [378.827028] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.828291] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [378.828327] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:433] is removed <7> [378.828353] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.828453] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [378.828527] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.828658] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.828852] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.829123] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.829347] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.829554] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.829649] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.829741] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.829832] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.829922] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.830226] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.844863] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [378.845506] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [378.845751] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.845884] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.846004] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.846124] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [378.846245] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [378.846377] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [378.846613] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [378.846739] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.846842] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.846943] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.847037] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [378.847130] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [378.847226] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [378.847360] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [378.847493] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [378.847651] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [378.847791] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [378.847924] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [378.848079] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [378.860346] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.861860] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [378.861928] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:434] is removed <7> [378.861975] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.862270] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [378.862477] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.862585] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.862691] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.862800] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.862941] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.863102] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.863288] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.863448] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.863605] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.863757] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.864162] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.878183] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [378.878405] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [378.878769] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.879084] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.879310] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.879549] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [378.879830] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [378.880071] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [378.880437] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [378.880651] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.880876] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.881051] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.881221] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [378.881414] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [378.881581] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [378.881844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [378.882081] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [378.882298] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [378.882512] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [378.882789] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [378.883044] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [378.893670] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.895234] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [378.895300] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [378.895385] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.895622] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [378.895856] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.896057] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.896254] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.896538] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.896707] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.896930] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.897128] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.897329] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.897520] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.897700] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.898148] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.911475] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [378.911721] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [378.912282] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.912748] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.913196] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.913394] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [378.913618] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [378.913844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [378.914159] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [378.914424] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [378.914710] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [378.914977] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [378.915211] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [378.915484] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [378.927033] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.928635] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [378.928701] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:434] is removed <7> [378.928745] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.928990] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [378.929190] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.929388] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.929625] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.929817] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.930042] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.930312] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.930589] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.930839] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.931089] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.931382] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.931967] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.945334] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [378.945529] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [378.945797] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.946037] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.946284] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.946480] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [378.946716] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [378.946959] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [378.947270] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400 <7> [378.947536] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400 <7> [378.947835] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [378.948108] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [378.948367] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193 <7> [378.948691] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [378.960356] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.961940] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [378.962012] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [378.962058] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.962314] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [378.962507] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.962718] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.962901] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.963077] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.963311] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.963604] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.963893] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.964140] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.964414] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.964654] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.965188] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [378.984269] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [378.984420] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [378.984610] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [378.984775] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [378.984925] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [378.985048] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [378.985186] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [378.985317] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [378.985508] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [378.985681] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [378.985835] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [378.985991] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [378.986157] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [378.986354] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [378.993671] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [378.995248] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [378.995316] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [378.995358] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [378.995597] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [378.995790] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [378.996018] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.996201] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.996378] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [378.996573] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [378.996853] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [378.997162] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [378.997421] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.997628] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [378.997830] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [378.998344] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [379.016732] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [379.016960] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [379.017210] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B] <7> [379.017500] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408 <7> [379.017741] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643 <7> [379.017942] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [379.018136] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [379.018325] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [379.018533] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [379.018704] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [379.018902] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [379.019081] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 <7> [379.019243] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 <7> [379.019470] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2 <7> [379.019700] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1948 qgv_peak_bw: 38400 <7> [379.019920] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1948 qgv_peak_bw: 38400 <7> [379.020127] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1948 qgv_peak_bw: 38400 <7> [379.020371] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1948 qgv_peak_bw: 38400 <7> [379.020569] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1948 <7> [379.020807] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [379.027073] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [379.028522] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [379.028592] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [379.028648] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [379.028910] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 1408) -> ( 0 - 0), size 1408 -> 0 <7> [379.029208] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1408 - 4051) -> ( 0 - 0), size 2643 -> 0 <7> [379.029413] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [379.029563] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.029688] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.029811] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.029946] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [379.030084] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.030223] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.030340] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.030488] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [379.030656] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [379.030809] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [379.030953] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.031097] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.031263] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [379.031633] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [379.054179] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [379.054383] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [379.054643] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B] <7> [379.054924] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456 <7> [379.055113] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595 <7> [379.055285] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [379.055451] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [379.055630] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [379.055785] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [379.055958] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [379.056105] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [379.056244] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [379.056383] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [379.056542] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2 <7> [379.056774] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3895 qgv_peak_bw: 38400 <7> [379.056964] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3895 qgv_peak_bw: 38400 <7> [379.057143] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3895 qgv_peak_bw: 38400 <7> [379.057313] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3895 qgv_peak_bw: 38400 <7> [379.057480] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3895 <7> [379.057735] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [379.060534] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [379.061049] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [379.061237] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [379.062198] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [379.062320] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [379.076982] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [379.078559] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [379.078640] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [379.078697] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [379.078999] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 1456) -> ( 0 - 0), size 1456 -> 0 <7> [379.079248] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1456 - 4051) -> ( 0 - 0), size 2595 -> 0 <7> [379.079451] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [379.079641] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.079825] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.080031] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.080263] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [379.080450] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.080652] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.080877] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.081122] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [379.081400] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [379.081675] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [379.081941] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.082234] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.082486] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [379.083126] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [379.105285] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [379.105431] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [379.105666] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [379.105806] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [379.105924] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [379.106041] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [379.106146] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [379.106268] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [379.106441] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [379.106636] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [379.106771] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.106901] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.107028] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [379.107194] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [379.110232] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [379.111344] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [379.111393] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [379.111419] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [379.111608] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [379.111814] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [379.111980] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.112142] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.112303] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.112508] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [379.112625] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [379.112734] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [379.112826] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.112919] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.113026] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [379.113292] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [379.135712] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [379.135895] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [379.136096] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [379.136273] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [379.136418] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [379.136577] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [379.136715] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [379.136923] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [379.137130] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [379.137314] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [379.137494] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.137665] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.137841] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [379.138048] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [379.143727] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [379.145036] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [379.145075] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [379.145102] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [379.145237] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [379.145339] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [379.145431] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.145521] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.145626] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.145829] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [379.145999] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [379.146157] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [379.146312] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.146465] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.146577] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [379.146892] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [379.170711] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [379.170881] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [379.171136] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [379.171283] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [379.171414] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [379.171544] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [379.171682] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [379.171822] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [379.172035] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [379.172177] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [379.172299] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [379.172421] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [379.172532] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [379.172641] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [379.172758] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [379.172905] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [379.173054] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [379.173187] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.173311] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.173435] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [379.173615] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [379.176933] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [379.178104] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [379.178141] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [379.178166] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [379.178293] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [379.178361] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [379.178416] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.178473] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.178529] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.178663] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [379.178895] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [379.179182] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [379.179419] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.179562] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.179662] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [379.179937] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [379.209515] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [379.209629] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100 <7> [379.209773] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [379.209848] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [379.209918] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [379.209987] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 <7> [379.210052] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 <7> [379.210133] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1 <7> [379.210235] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400 <7> [379.210370] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400 <7> [379.210471] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [379.210574] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400 <7> [379.210663] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193 <7> [379.210781] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214 <7> [379.211289] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [379.211892] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [379.212059] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [379.215491] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [379.215597] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [379.226944] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [379.228220] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [379.228261] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [379.228293] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [379.228425] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [379.228529] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [379.228726] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.228964] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.229159] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.229386] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [379.229592] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [379.229717] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [379.229845] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.229963] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.230079] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [379.230367] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [379.245458] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [379.245871] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [379.246107] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [379.246287] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [379.246472] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [379.246627] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [379.246801] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [379.246998] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [379.247233] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [379.247433] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [379.247657] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [379.247844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [379.248022] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [379.248240] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [379.260285] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [379.261758] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [379.261827] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:434] is removed <7> [379.261874] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [379.262148] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [379.262358] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [379.262552] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.262721] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.262903] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.263094] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [379.263517] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [379.263771] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [379.264022] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.264396] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.264655] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [379.265295] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [379.278029] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [379.278218] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [379.278499] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [379.278795] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [379.279005] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [379.279202] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [379.279425] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [379.279641] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [379.279946] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [379.280218] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [379.280481] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.280750] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.281007] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [379.281324] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [379.293595] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [379.295082] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [379.295147] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [379.295188] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [379.295462] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [379.295670] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [379.295868] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.296060] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.296288] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.296542] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [379.296849] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [379.297114] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [379.297384] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.297643] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.297903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [379.298486] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [379.311176] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [379.311347] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [379.311828] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [379.312321] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [379.312727] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [379.312934] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [379.313218] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [379.313444] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [379.313720] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [379.313989] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [379.314307] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.314569] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.314853] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [379.315197] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [379.326951] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [379.328557] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [379.328627] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:434] is removed <7> [379.328672] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [379.328979] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [379.329192] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [379.329391] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.329590] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.329874] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.330090] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [379.330368] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [379.330646] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [379.330907] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.331165] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.331472] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [379.332093] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [379.350702] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [379.350900] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [379.351145] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [379.351427] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [379.351631] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [379.351827] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [379.352030] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [379.352261] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [379.352548] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [379.352813] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [379.353072] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [379.353419] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [379.353683] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [379.353989] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [379.360238] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [379.361765] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [379.361830] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [379.361871] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [379.362153] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [379.362372] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [379.362557] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.362737] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.362910] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.363156] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [379.363464] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [379.363702] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [379.363940] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.364163] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.364379] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [379.364868] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [379.389587] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [379.389771] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [379.390006] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [379.390171] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [379.390325] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [379.390507] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [379.390648] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [379.390806] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [379.390996] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [379.391179] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [379.391359] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.391557] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.391735] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [379.391932] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [379.394400] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [379.394707] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [379.394855] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [379.394977] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [379.395085] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [379.410240] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [379.411744] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [379.411814] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [379.411857] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [379.412180] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [379.412393] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [379.412593] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.412801] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.413041] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.413254] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [379.413567] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [379.413843] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [379.414107] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.414352] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.414594] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [379.415168] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [379.439771] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [379.439984] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [379.440251] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [379.440559] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [379.440749] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [379.440927] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [379.441098] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [379.441326] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [379.441558] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [379.441777] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [379.441985] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.442184] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.442401] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [379.442634] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [379.444237] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [379.444767] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [379.444972] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [379.445885] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [379.446018] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [379.460258] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [379.461744] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [379.461831] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [379.461875] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [379.462128] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [379.462337] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [379.462532] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.462722] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.462983] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.463193] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [379.463462] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [379.463729] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [379.464105] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.464364] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.464657] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [379.465205] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [379.489496] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [379.489669] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [379.489921] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [379.490131] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [379.490354] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [379.490518] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [379.490669] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [379.490867] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [379.491142] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200 <7> [379.491366] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [379.491512] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [379.491639] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [379.491767] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [379.491887] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [379.492033] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [379.492248] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [379.492417] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [379.492578] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.492735] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.492883] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [379.493091] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244 <7> [379.494170] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [379.494688] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [379.494875] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [379.496275] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [379.496391] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [379.510249] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [379.511772] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [379.511838] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [379.511878] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [379.512133] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [379.512337] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [379.512531] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.512746] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.512934] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.513137] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [379.513395] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [379.513644] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [379.513923] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.514153] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.514410] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [379.514896] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [379.528054] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [379.528266] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [379.528587] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [379.528806] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [379.529008] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [379.529205] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [379.529443] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [379.529663] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [379.529936] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [379.530200] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [379.530488] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [379.530745] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [379.531007] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [379.531311] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [379.543580] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [379.545101] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [379.545167] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:434] is removed <7> [379.545213] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [379.545470] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [379.545727] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [379.545933] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.546174] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.546366] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.546599] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [379.546873] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [379.547178] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [379.547442] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.547704] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.547982] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [379.548540] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [379.561144] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [379.561305] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [379.561539] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [379.561834] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [379.562023] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [379.562261] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [379.562488] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [379.562781] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [379.563054] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [379.563316] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [379.563570] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.563887] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.564142] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [379.564450] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [379.576913] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [379.578394] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [379.578458] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [379.578497] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [379.578737] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [379.578955] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [379.579139] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.579357] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.579535] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.579777] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [379.580042] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [379.580311] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [379.580572] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.580830] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.581123] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [379.581709] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [379.594579] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [379.594762] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [379.595085] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [379.595308] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [379.595518] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [379.595719] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [379.595933] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [379.596162] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [379.596441] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [379.596714] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [379.597010] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.597275] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.597537] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [379.597872] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [379.610232] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [379.611738] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [379.611805] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:434] is removed <7> [379.611847] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [379.612102] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [379.612310] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [379.612505] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.612768] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.612958] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.613165] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [379.613437] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [379.613718] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [379.613966] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.614210] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.614513] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [379.615115] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [379.634365] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [379.634591] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [379.634871] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [379.635176] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [379.635382] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [379.635607] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 <7> [379.635802] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 <7> [379.636084] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1 <7> [379.636364] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400 <7> [379.636634] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400 <7> [379.636897] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [379.637211] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400 <7> [379.637465] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299 <7> [379.637762] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [379.643559] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [379.645002] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [379.645079] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [379.645139] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [379.645393] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [379.645591] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [379.645774] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.646058] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.646262] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.646467] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [379.646741] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [379.647046] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [379.647310] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.647572] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.647842] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [379.648501] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [379.675005] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [379.675229] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [379.675476] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [379.675655] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [379.675809] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [379.675959] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [379.676113] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [379.676307] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [379.676497] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [379.676674] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [379.676847] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.677015] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.677185] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [379.677392] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [379.679189] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [379.679667] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [379.679830] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [379.680554] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [379.680673] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [379.693574] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [379.695280] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [379.695354] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [379.695407] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [379.695701] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [379.696022] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [379.696276] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.696528] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.696745] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.696928] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [379.697195] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [379.697418] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [379.697629] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.697857] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.698057] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [379.698551] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [379.722680] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [379.722868] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [379.723102] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [379.723334] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [379.723488] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [379.723632] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [379.723768] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [379.723948] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [379.724157] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [379.724335] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [379.724507] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.724669] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.724822] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [379.725026] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [379.743557] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [379.745372] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [379.745464] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [379.745529] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [379.745924] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [379.746209] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [379.746477] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.746775] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.747022] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.747267] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [379.747583] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [379.747919] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [379.748201] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.748478] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.748763] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [379.749369] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [379.773225] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [379.773442] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400 <7> [379.773682] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [379.773872] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [379.774057] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 <7> [379.774220] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 <7> [379.774371] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 <7> [379.774570] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1 <7> [379.774790] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400 <7> [379.774985] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400 <7> [379.775191] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.775372] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400 <7> [379.775544] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597 <7> [379.775773] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254 <7> [379.777132] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [379.777602] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [379.777819] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [379.778946] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [379.779077] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [379.793541] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [379.795222] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [379.795285] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [379.795327] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [379.795570] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [379.795836] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [379.796036] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.796229] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.796420] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [379.796634] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [379.796873] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [379.797096] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [379.797317] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.797574] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [379.797781] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [379.798236] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <6> [379.811207] [IGT] kms_plane_scaling: finished subtest pipe-B, SUCCESS

<6> [376.826659] [IGT] kms_plane_scaling: starting dynamic subtest pipe-B

<7> [376.830592] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [376.832144] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [376.832463] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:270:pipe B] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [376.832753] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000

<7> [376.833061] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [376.833346] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:270:pipe B]

<7> [376.833625] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [376.833902] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [376.834237] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [376.834508] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [376.834763] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)

<7> [376.835023] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [376.835266] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [376.835499] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)

<7> [376.835726] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)

<7> [376.835949] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)

<7> [376.836202] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)

<7> [376.836408] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)

<7> [376.836610] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)

<7> [376.836802] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [376.837013] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [376.837192] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [376.837368] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)

<7> [376.837541] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)

<7> [376.837706] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)

<7> [376.837902] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)

<7> [376.838073] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)

<7> [376.838221] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)

<7> [376.838368] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)

<7> [376.838516] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)

<7> [376.838658] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)

<7> [376.838812] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [376.838993] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [376.839127] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [376.839275] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)

<7> [376.839425] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)

<7> [376.839553] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)

<7> [376.839672] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [376.839804] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [376.839943] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [376.840057] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [376.840167] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)

<7> [376.840275] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)

<7> [376.840381] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 432000, found 0)

<7> [376.840488] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [376.840593] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.enable (expected no, found yes)

<7> [376.840693] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [376.840798] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1)

<7> [376.840896] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in lane_count (expected 0, found 4)

<7> [376.840993] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)

<7> [376.841088] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [376.841186] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [376.841282] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)

<7> [376.841377] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)

<7> [376.841471] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)

<7> [376.841563] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)

<7> [376.841654] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)

<7> [376.841743] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)

<7> [376.841908] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [376.842016] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [376.842067] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [376.842122] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [376.842173] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [376.842216] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [376.842298] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)

<7> [376.842380] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)

<7> [376.842462] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)

<7> [376.842542] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)

<7> [376.842620] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)

<7> [376.842699] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)

<7> [376.842966] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)

<7> [376.843059] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)

<7> [376.843137] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)

<7> [376.843209] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [376.843280] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [376.843352] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [376.843422] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)

<7> [376.843493] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)

<7> [376.843563] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)

<7> [376.843634] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [376.843712] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [376.843791] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [376.843868] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [376.843944] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)

<7> [376.844019] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)

<7> [376.844090] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in port_clock (expected 0, found 432000)

<7> [376.844160] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] fastset requirement not met, forcing full modeset

<7> [376.844234] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0

<7> [376.844326] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [376.844408] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x2

<7> [376.844472] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:270:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x1 -> 0x2

<7> [376.844535] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0

<7> [376.844595] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [376.844654] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:264:cursor B] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45

<7> [376.844731] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [376.844795] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [376.844858] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [376.844925] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [376.845004] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [376.845097] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [376.845184] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [376.845266] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [376.845348] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [376.845428] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [376.845521] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min cdclk: 309076 kHz -> 0 kHz

<7> [376.845602] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:270:pipe B] min cdclk: 0 kHz -> 309076 kHz

<7> [376.845710] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 77269 kHz -> 19318 kHz

<7> [376.845825] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:270:pipe B] allocated DPLL 0

<7> [376.845925] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:270:pipe B] reserving DPLL 0

<7> [376.846018] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [376.846086] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: no [modeset]

<7> [376.846175] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [376.846263] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [376.846350] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [376.846435] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [376.846521] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [376.846605] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [376.846690] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: yes [modeset]

<7> [376.846775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [376.846860] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0

<7> [376.846940] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [376.847016] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [376.847092] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [376.847167] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [376.847251] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64

<7> [376.847333] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [376.847416] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled

<7> [376.847499] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [376.847587] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [376.847670] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0

<7> [376.847753] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [376.847835] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [376.847918] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [376.847993] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [376.848068] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [376.848143] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [376.848218] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [376.848292] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [376.848372] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [376.848456] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97

<7> [376.848545] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906

<7> [376.848629] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [376.848712] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [376.848794] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [376.848876] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [376.848959] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [376.849040] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [376.849121] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 309076, min voltage level 0

<7> [376.849196] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0

<7> [376.849270] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x40, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [376.849343] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0

<7> [376.849415] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [376.849489] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [376.849581] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [376.849661] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [376.849739] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no,

<7> [376.849818] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.

<7> [376.849896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [376.849973] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [376.850050] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [376.850128] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [376.850205] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [376.850282] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [376.850360] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [376.850439] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [376.850546] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [376.850619] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [376.850691] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [376.850763] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [376.850834] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [376.850906] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [376.850978] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [376.851052] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [376.851126] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [376.851199] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [376.851272] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [376.851344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:154:plane 1B] fb: [FB:432] 2880x1800 format = RG16 little-endian (0x36314752) modifier = 0x0, visible: yes

<7> [376.851417] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0

<7> [376.851505] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2160x1350+0+0

<7> [376.851586] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:184:plane 2B] fb: [NOFB], visible: no

<7> [376.851665] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:214:plane 3B] fb: [NOFB], visible: no

<7> [376.851745] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:244:plane 4B] fb: [NOFB], visible: no

<7> [376.851823] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:254:plane 5B] fb: [NOFB], visible: no

<7> [376.851901] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:264:cursor B] fb: [NOFB], visible: no

<7> [376.853353] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [376.853472] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [376.853630] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [376.853767] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [376.853915] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000)

<7> [376.854083] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [376.854168] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [377.051943] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0

<7> [377.052566] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [377.059266] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off

<7> [377.059617] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [377.060000] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [377.111049] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [377.111374] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]

<7> [377.112062] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [377.112334] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short

<7> [377.112723] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]

<7> [377.113482] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [377.113895] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [377.114282] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A]

<7> [377.114635] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1]

<7> [377.114889] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A]

<7> [377.115136] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B]

<7> [377.115411] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C]

<7> [377.115718] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2]

<7> [377.115973] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A]

<7> [377.116227] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B]

<7> [377.116543] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C]

<7> [377.116816] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3]

<7> [377.117086] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A]

<7> [377.117379] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B]

<7> [377.117626] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C]

<7> [377.117875] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:402:DP-1]

<7> [377.118137] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:414:DP-2]

<7> [377.118420] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:422:DP-3]

<7> [377.118764] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 6 (mbus joined: yes)

<7> [377.119042] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [377.120324] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:270:pipe B]

<7> [377.120701] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [377.122973] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on

<7> [377.123254] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (488 ms remaining)

<7> [377.150781] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [377.151102] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long

<7> [377.151371] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [377.151680] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]

<7> [377.604731] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [377.724944] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [377.725306] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on

<7> [377.725576] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063

<7> [377.762165] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [377.762481] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long

<7> [377.762767] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20

<7> [377.763380] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]

<7> [377.932172] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [377.932566] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on

<7> [377.932826] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b

<7> [377.934759] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [377.936209] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [377.936915] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05

<7> [377.937916] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [377.939182] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [377.940260] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK

<7> [377.940598] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4

<7> [377.942066] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [377.942419] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4

<7> [377.943245] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe B

<7> [377.943730] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [377.944118] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe B

<7> [377.944613] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 13892

<7> [377.960672] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A

<7> [377.961013] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000)

<7> [377.961401] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]

<7> [377.961731] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [377.963149] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]

<7> [377.963433] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:270:pipe B]

<7> [377.966922] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe B

<7> [377.967174] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [377.967241] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [377.967306] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [377.967619] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [377.967842] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [377.968027] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [377.968209] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [377.968469] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [377.968695] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [377.968964] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [377.969229] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [377.969518] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [377.969774] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [377.970055] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [377.970790] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [377.978330] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [377.978535] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [377.978870] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [377.979165] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [377.979427] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [377.979676] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [377.979925] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [377.980177] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [377.980509] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [377.980779] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [377.981050] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [377.981367] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [377.981655] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [377.981974] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 19318 kHz -> 38635 kHz

<7> [377.982236] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [377.993814] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [377.995417] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [377.995489] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:434] is removed

<7> [377.995537] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [377.995864] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [377.996088] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [377.996299] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [377.996536] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [377.996743] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [377.996968] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [377.997258] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [377.997561] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [377.997844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [377.998120] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [377.998414] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [377.999013] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.011641] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [378.011836] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [378.012145] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.012388] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.012585] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.012770] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [378.012968] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [378.013198] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [378.013459] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [378.013725] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [378.013988] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [378.014275] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [378.014584] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [378.014936] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [378.027150] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.028711] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [378.028779] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [378.028820] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.029069] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [378.029276] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.029474] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.029667] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.029971] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.030184] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.030464] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.030723] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.030970] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.031212] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.031474] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.032098] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.045554] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [378.046322] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [378.046853] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.047187] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.047451] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.047648] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [378.047949] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [378.048173] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [378.048497] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400

<7> [378.048767] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400

<7> [378.049031] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [378.049315] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [378.049572] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193

<7> [378.049886] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 38635 kHz -> 77269 kHz

<7> [378.050148] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [378.060472] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.062003] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [378.062072] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:434] is removed

<7> [378.062118] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.062370] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [378.062627] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.062830] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.063095] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.063286] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.063540] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.063800] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.064090] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.064331] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.064599] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.064841] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.065328] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.084405] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [378.084534] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [378.084732] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.084883] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.085025] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.085158] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [378.085286] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [378.085483] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [378.085655] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [378.085820] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [378.085985] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [378.086150] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [378.086335] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [378.086545] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [378.093808] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.095357] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [378.095424] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [378.095467] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.095759] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [378.095966] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.096249] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.096457] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.096645] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.096842] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.097116] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.097369] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.097656] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.097889] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.098124] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.098651] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.116837] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [378.117030] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [378.117293] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B]

<7> [378.117608] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408

<7> [378.117820] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643

<7> [378.118024] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.118218] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.118412] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [378.118635] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [378.118811] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.118979] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.119138] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [378.119294] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [378.119513] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2

<7> [378.119740] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1948 qgv_peak_bw: 38400

<7> [378.119960] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1948 qgv_peak_bw: 38400

<7> [378.120167] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1948 qgv_peak_bw: 38400

<7> [378.120405] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1948 qgv_peak_bw: 38400

<7> [378.120663] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1948

<7> [378.120898] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [378.127115] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.128467] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [378.128516] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [378.128554] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.128805] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 1408) -> ( 0 - 0), size 1408 -> 0

<7> [378.129013] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1408 - 4051) -> ( 0 - 0), size 2643 -> 0

<7> [378.129210] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.129460] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.129591] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.129724] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.129842] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.129953] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.130064] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.130170] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.130325] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.130486] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.130640] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.130788] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.130934] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.131076] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.131422] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.153692] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [378.153902] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [378.154189] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B]

<7> [378.154445] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456

<7> [378.154758] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595

<7> [378.154950] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.155124] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.155296] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [378.155494] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [378.155698] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.155859] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.156016] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [378.156189] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [378.156384] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2

<7> [378.156684] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [378.156844] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B]

<7> [378.157014] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456

<7> [378.157150] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595

<7> [378.157284] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.157417] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.157555] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [378.157679] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [378.157815] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.157951] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.158065] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [378.158189] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [378.158308] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2

<7> [378.158472] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3895 qgv_peak_bw: 38400

<7> [378.158688] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3895 qgv_peak_bw: 38400

<7> [378.158864] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3895 qgv_peak_bw: 38400

<7> [378.159033] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3895 qgv_peak_bw: 38400

<7> [378.159173] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3895

<7> [378.159364] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [378.160519] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [378.161124] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [378.161306] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [378.163786] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [378.163890] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [378.177105] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.178580] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [378.178642] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [378.178691] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.178933] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 1456) -> ( 0 - 0), size 1456 -> 0

<7> [378.179204] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1456 - 4051) -> ( 0 - 0), size 2595 -> 0

<7> [378.179391] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.179557] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.179706] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.179866] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.180050] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.180184] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.180315] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.180447] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.180594] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.180782] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.180974] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.181152] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.181321] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.181491] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.181915] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.204075] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [378.204225] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [378.204455] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.204648] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.204802] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.204950] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [378.205112] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [378.205285] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [378.205577] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [378.205723] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.205870] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.206012] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.206135] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [378.206250] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [378.206405] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [378.206581] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [378.206754] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [378.206920] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [378.207080] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [378.207231] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [378.207434] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [378.227106] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.228642] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [378.228712] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [378.228756] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.229095] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [378.229319] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.229540] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.229786] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.230002] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.230295] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.230608] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.230929] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.231212] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.231487] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.231785] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.232399] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.256731] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [378.256908] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [378.257201] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.257384] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.257554] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.257717] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [378.257889] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [378.258073] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [378.258284] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [378.258486] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [378.258678] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [378.258879] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [378.259067] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [378.259284] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [378.261115] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [378.261650] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [378.261864] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [378.262446] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [378.262593] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [378.277112] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.278621] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [378.278689] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [378.278732] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.278989] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [378.279196] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.279397] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.279647] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.279883] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.280146] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.280434] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.280766] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.281036] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.281297] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.281628] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.282165] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.306545] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [378.306710] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [378.306994] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.307178] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.307347] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.307513] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [378.307667] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [378.307858] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [378.308063] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [378.308263] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [378.308455] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [378.308634] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [378.308832] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [378.309037] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [378.310814] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [378.311357] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [378.311550] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [378.312210] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [378.312342] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [378.327099] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.328715] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [378.328786] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [378.328831] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.329102] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [378.329344] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.329559] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.329765] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.329994] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.330219] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.330545] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.330811] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.331096] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.331363] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.331603] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.332143] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.360574] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [378.360822] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [378.360999] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [378.364835] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [378.364927] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x40

<7> [378.365057] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.365142] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.365215] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.365284] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [378.365352] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [378.365449] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [378.365550] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400

<7> [378.365645] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400

<7> [378.365738] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [378.365823] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [378.365908] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193

<7> [378.366014] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:154

<7> [378.370422] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [378.370532] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [378.377102] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.378476] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [378.378524] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [378.378571] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.378834] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [378.379029] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.379262] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.379455] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.379603] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.379680] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.379776] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.379862] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.379947] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.380033] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.380136] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.380392] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.395138] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [378.395474] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [378.395720] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.395887] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.396028] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.396159] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [378.396285] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [378.396448] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [378.396653] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [378.396823] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [378.396983] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [378.397139] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [378.397315] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [378.397519] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [378.410389] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.411646] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [378.411702] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:434] is removed

<7> [378.411739] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.411955] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [378.412138] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.412355] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.412523] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.412634] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.412764] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.412962] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.413138] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.413331] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.413500] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.413669] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.414070] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.428076] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [378.428257] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [378.428546] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.428791] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.429051] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.429254] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [378.429456] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [378.429674] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [378.429975] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [378.430242] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [378.430506] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [378.430763] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [378.431114] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [378.431422] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [378.443717] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.445223] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [378.445288] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [378.445331] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.445621] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [378.445881] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.446087] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.446291] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.446503] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.446701] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.447007] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.447256] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.447538] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.447799] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.448053] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.448692] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.461624] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [378.461799] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [378.462250] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.462756] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.463176] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.463362] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [378.463580] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [378.463800] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [378.464101] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [378.464354] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [378.464615] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [378.464873] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [378.465184] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [378.465489] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [378.477076] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.478572] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [378.478662] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:434] is removed

<7> [378.478704] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.478947] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [378.479142] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.479329] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.479514] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.479776] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.479987] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.480255] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.480511] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.480851] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.481111] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.481367] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.481938] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.495431] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [378.495643] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [378.495925] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.496141] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.496397] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.496596] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [378.496823] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [378.497037] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [378.497339] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400

<7> [378.497608] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400

<7> [378.497873] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [378.498202] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [378.498486] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193

<7> [378.498800] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [378.510414] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.511917] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [378.511985] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [378.512028] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.512283] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [378.512488] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.512683] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.512930] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.513118] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.513324] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.513596] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.513892] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.514158] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.514472] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.514785] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.515365] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.534423] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [378.534564] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [378.534780] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.534968] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.535120] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.535294] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [378.535437] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [378.535616] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [378.535861] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [378.536008] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.536140] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.536309] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.536437] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [378.536609] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [378.536755] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [378.536962] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [378.537182] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [378.537391] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [378.537597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [378.537818] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [378.538059] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [378.543712] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.544993] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [378.545035] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [378.545063] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.545224] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [378.545353] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.545474] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.545660] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.545885] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.546211] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.546526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.546700] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.546868] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.547051] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.547209] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.547573] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.566613] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [378.566802] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [378.567050] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B]

<7> [378.567308] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408

<7> [378.567599] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643

<7> [378.567807] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.568011] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.568211] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [378.568484] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [378.568682] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.568895] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.569083] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [378.569260] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [378.569486] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2

<7> [378.569739] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1948 qgv_peak_bw: 38400

<7> [378.569972] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1948 qgv_peak_bw: 38400

<7> [378.570205] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1948 qgv_peak_bw: 38400

<7> [378.570457] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1948 qgv_peak_bw: 38400

<7> [378.570712] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1948

<7> [378.570982] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [378.577143] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.578480] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [378.578544] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [378.578596] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.578850] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 1408) -> ( 0 - 0), size 1408 -> 0

<7> [378.579064] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1408 - 4051) -> ( 0 - 0), size 2643 -> 0

<7> [378.579345] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.579555] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.579694] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.579814] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.579945] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.580074] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.580224] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.580334] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.580475] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.580664] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.580825] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.580976] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.581130] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.581275] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.581644] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.604296] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [378.604527] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [378.604768] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B]

<7> [378.605008] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456

<7> [378.605219] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595

<7> [378.605386] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.605574] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.605729] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [378.605878] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [378.606047] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.606209] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.606350] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [378.606511] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [378.606664] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2

<7> [378.606856] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3895 qgv_peak_bw: 38400

<7> [378.607044] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3895 qgv_peak_bw: 38400

<7> [378.607226] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3895 qgv_peak_bw: 38400

<7> [378.607405] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3895 qgv_peak_bw: 38400

<7> [378.607647] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3895

<7> [378.607857] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [378.611407] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [378.612102] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [378.612233] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [378.612397] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [378.612503] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [378.627066] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.628690] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [378.628758] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [378.628809] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.629107] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 1456) -> ( 0 - 0), size 1456 -> 0

<7> [378.629314] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1456 - 4051) -> ( 0 - 0), size 2595 -> 0

<7> [378.629509] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.629699] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.629907] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.630089] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.630297] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.630485] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.630685] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.630861] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.631040] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.631276] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.631504] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.631723] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.632010] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.632215] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.632721] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.656203] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [378.656396] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [378.656675] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.656873] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.657051] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.657249] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [378.657419] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [378.657635] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [378.657874] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [378.658086] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [378.658321] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [378.658542] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [378.658736] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [378.658965] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [378.677035] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.678513] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [378.678578] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [378.678618] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.678906] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [378.679121] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.679306] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.679494] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.679767] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.679995] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.680265] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.680543] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.680855] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.681136] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.681432] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.682070] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.709783] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [378.709882] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [378.710077] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.710159] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.710232] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.710302] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [378.710371] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [378.710451] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [378.710555] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [378.710647] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [378.710734] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [378.710819] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [378.710924] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [378.710968] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [378.711037] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [378.711103] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [378.711253] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [378.713594] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [378.713695] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [378.727118] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.728544] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [378.728610] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:433] is removed

<7> [378.728652] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.728892] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [378.729118] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.729301] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.729536] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.729677] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.729851] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.730064] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.730249] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.730442] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.730619] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.730788] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.731199] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.756269] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [378.756485] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [378.756782] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.756984] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.757168] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.757348] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [378.757522] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [378.757749] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [378.757988] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [378.758203] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [378.758413] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [378.758611] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [378.758829] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [378.759058] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [378.760674] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [378.761288] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [378.761481] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [378.762242] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [378.762412] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [378.777042] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.778644] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [378.778716] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:433] is removed

<7> [378.778764] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.779015] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [378.779289] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.779488] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.779697] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.779920] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.780130] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.780429] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.780681] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.780920] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.781161] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.781395] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.781939] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.810542] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [378.810740] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [378.810853] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [378.812683] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [378.812777] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x80

<7> [378.812900] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.812982] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.813052] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.813119] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [378.813181] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [378.813254] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [378.813365] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400

<7> [378.813491] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400

<7> [378.813610] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [378.813711] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [378.813810] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193

<7> [378.813927] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:184

<7> [378.818490] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [378.818613] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [378.827028] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.828291] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [378.828327] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:433] is removed

<7> [378.828353] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.828453] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [378.828527] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.828658] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.828852] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.829123] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.829347] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.829554] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.829649] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.829741] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.829832] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.829922] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.830226] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.844863] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [378.845506] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [378.845751] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.845884] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.846004] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.846124] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [378.846245] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [378.846377] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [378.846613] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [378.846739] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.846842] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.846943] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.847037] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [378.847130] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [378.847226] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [378.847360] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [378.847493] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [378.847651] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [378.847791] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [378.847924] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [378.848079] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [378.860346] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.861860] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [378.861928] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:434] is removed

<7> [378.861975] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.862270] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [378.862477] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.862585] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.862691] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.862800] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.862941] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.863102] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.863288] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.863448] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.863605] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.863757] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.864162] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.878183] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [378.878405] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [378.878769] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.879084] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.879310] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.879549] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [378.879830] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [378.880071] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [378.880437] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [378.880651] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.880876] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.881051] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.881221] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [378.881414] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [378.881581] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [378.881844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [378.882081] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [378.882298] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [378.882512] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [378.882789] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [378.883044] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [378.893670] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.895234] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [378.895300] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [378.895385] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.895622] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [378.895856] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.896057] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.896254] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.896538] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.896707] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.896930] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.897128] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.897329] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.897520] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.897700] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.898148] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.911475] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [378.911721] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [378.912282] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.912748] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.913196] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.913394] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [378.913618] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [378.913844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [378.914159] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [378.914424] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [378.914710] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [378.914977] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [378.915211] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [378.915484] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [378.927033] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.928635] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [378.928701] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:434] is removed

<7> [378.928745] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.928990] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [378.929190] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.929388] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.929625] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.929817] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.930042] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.930312] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.930589] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.930839] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.931089] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.931382] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.931967] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.945334] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [378.945529] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [378.945797] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.946037] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.946284] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.946480] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [378.946716] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [378.946959] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [378.947270] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400

<7> [378.947536] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400

<7> [378.947835] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [378.948108] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [378.948367] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193

<7> [378.948691] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [378.960356] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.961940] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [378.962012] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [378.962058] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.962314] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [378.962507] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.962718] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.962901] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.963077] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.963311] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.963604] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.963893] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.964140] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.964414] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.964654] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.965188] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [378.984269] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [378.984420] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [378.984610] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [378.984775] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [378.984925] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [378.985048] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [378.985186] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [378.985317] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [378.985508] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [378.985681] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [378.985835] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [378.985991] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [378.986157] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [378.986354] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [378.993671] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [378.995248] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [378.995316] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [378.995358] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [378.995597] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [378.995790] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [378.996018] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.996201] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.996378] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [378.996573] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [378.996853] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [378.997162] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [378.997421] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.997628] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [378.997830] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [378.998344] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [379.016732] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [379.016960] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [379.017210] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B]

<7> [379.017500] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1408), size 0 -> 1408

<7> [379.017741] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1408 - 4051), size 0 -> 2643

<7> [379.017942] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [379.018136] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [379.018325] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [379.018533] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [379.018704] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [379.018902] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [379.019081] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43

<7> [379.019243] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44

<7> [379.019470] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1854456 num active planes 2

<7> [379.019700] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1948 qgv_peak_bw: 38400

<7> [379.019920] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1948 qgv_peak_bw: 38400

<7> [379.020127] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1948 qgv_peak_bw: 38400

<7> [379.020371] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1948 qgv_peak_bw: 38400

<7> [379.020569] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1948

<7> [379.020807] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [379.027073] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [379.028522] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [379.028592] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [379.028648] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [379.028910] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 1408) -> ( 0 - 0), size 1408 -> 0

<7> [379.029208] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1408 - 4051) -> ( 0 - 0), size 2643 -> 0

<7> [379.029413] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [379.029563] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.029688] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.029811] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.029946] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [379.030084] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.030223] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 15, 155, 155, 155, 155, 155, 0, 0, 29, 29, 43 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.030340] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 18, 172, 172, 172, 172, 172, 0, 0, 30, 33, 44 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.030488] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [379.030656] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [379.030809] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [379.030953] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.031097] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.031263] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [379.031633] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [379.054179] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [379.054383] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [379.054643] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B]

<7> [379.054924] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1456), size 0 -> 1456

<7> [379.055113] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1456 - 4051), size 0 -> 2595

<7> [379.055285] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [379.055451] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [379.055630] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [379.055785] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [379.055958] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [379.056105] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [379.056244] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [379.056383] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [379.056542] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 3708912 num active planes 2

<7> [379.056774] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 3895 qgv_peak_bw: 38400

<7> [379.056964] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 3895 qgv_peak_bw: 38400

<7> [379.057143] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 3895 qgv_peak_bw: 38400

<7> [379.057313] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 3895 qgv_peak_bw: 38400

<7> [379.057480] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 3895

<7> [379.057735] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [379.060534] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [379.061049] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [379.061237] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [379.062198] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [379.062320] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [379.076982] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [379.078559] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [379.078640] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [379.078697] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [379.078999] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 1456) -> ( 0 - 0), size 1456 -> 0

<7> [379.079248] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1456 - 4051) -> ( 0 - 0), size 2595 -> 0

<7> [379.079451] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [379.079641] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.079825] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.080031] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.080263] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [379.080450] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.080652] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.080877] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.081122] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [379.081400] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [379.081675] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [379.081941] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.082234] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.082486] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [379.083126] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [379.105285] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [379.105431] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [379.105666] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [379.105806] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [379.105924] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [379.106041] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [379.106146] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [379.106268] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [379.106441] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [379.106636] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [379.106771] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.106901] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.107028] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [379.107194] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [379.110232] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [379.111344] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [379.111393] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [379.111419] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [379.111608] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [379.111814] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [379.111980] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.112142] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.112303] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.112508] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [379.112625] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [379.112734] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [379.112826] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.112919] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.113026] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [379.113292] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [379.135712] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [379.135895] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [379.136096] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [379.136273] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [379.136418] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [379.136577] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [379.136715] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [379.136923] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [379.137130] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [379.137314] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [379.137494] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.137665] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.137841] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [379.138048] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [379.143727] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [379.145036] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [379.145075] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [379.145102] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [379.145237] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [379.145339] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [379.145431] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.145521] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.145626] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.145829] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [379.145999] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [379.146157] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [379.146312] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.146465] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.146577] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [379.146892] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [379.170711] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [379.170881] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [379.171136] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [379.171283] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [379.171414] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [379.171544] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [379.171682] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [379.171822] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [379.172035] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [379.172177] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [379.172299] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [379.172421] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [379.172532] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [379.172641] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [379.172758] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [379.172905] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [379.173054] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [379.173187] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.173311] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.173435] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [379.173615] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [379.176933] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [379.178104] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [379.178141] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [379.178166] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [379.178293] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [379.178361] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [379.178416] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.178473] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.178529] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.178663] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [379.178895] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [379.179182] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [379.179419] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.179562] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.179662] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [379.179937] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [379.209515] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [379.209629] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x100

<7> [379.209773] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [379.209848] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [379.209918] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [379.209987] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199

<7> [379.210052] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205

<7> [379.210133] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 4945216 num active planes 1

<7> [379.210235] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 5193 qgv_peak_bw: 38400

<7> [379.210370] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 5193 qgv_peak_bw: 38400

<7> [379.210471] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [379.210574] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 5193 qgv_peak_bw: 38400

<7> [379.210663] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 5193

<7> [379.210781] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:214

<7> [379.211289] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [379.211892] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [379.212059] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [379.215491] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [379.215597] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [379.226944] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [379.228220] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [379.228261] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [379.228293] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [379.228425] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [379.228529] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [379.228726] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.228964] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 93,1013,1013,1013,1013,1013, 0, 0, 107, 185, 199 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.229159] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 104,1116,1116,1116,1116,1116, 0, 0, 108, 205, 205 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.229386] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [379.229592] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [379.229717] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [379.229845] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.229963] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.230079] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [379.230367] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [379.245458] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [379.245871] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [379.246107] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [379.246287] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [379.246472] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [379.246627] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [379.246801] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [379.246998] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [379.247233] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [379.247433] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [379.247657] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [379.247844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [379.248022] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [379.248240] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [379.260285] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [379.261758] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [379.261827] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:434] is removed

<7> [379.261874] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [379.262148] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [379.262358] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [379.262552] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.262721] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.262903] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.263094] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [379.263517] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [379.263771] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [379.264022] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.264396] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.264655] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [379.265295] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [379.278029] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [379.278218] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [379.278499] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [379.278795] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [379.279005] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [379.279202] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [379.279425] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [379.279641] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [379.279946] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [379.280218] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [379.280481] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.280750] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.281007] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [379.281324] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [379.293595] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [379.295082] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [379.295147] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [379.295188] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [379.295462] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [379.295670] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [379.295868] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.296060] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.296288] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.296542] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [379.296849] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [379.297114] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [379.297384] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.297643] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.297903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [379.298486] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [379.311176] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [379.311347] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [379.311828] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [379.312321] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [379.312727] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [379.312934] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [379.313218] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [379.313444] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [379.313720] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [379.313989] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [379.314307] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.314569] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.314853] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [379.315197] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [379.326951] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [379.328557] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [379.328627] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:434] is removed

<7> [379.328672] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [379.328979] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [379.329192] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [379.329391] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.329590] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.329874] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.330090] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [379.330368] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [379.330646] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [379.330907] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.331165] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.331472] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [379.332093] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [379.350702] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [379.350900] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [379.351145] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [379.351427] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [379.351631] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [379.351827] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [379.352030] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [379.352261] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [379.352548] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [379.352813] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [379.353072] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [379.353419] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [379.353683] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [379.353989] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [379.360238] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [379.361765] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [379.361830] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [379.361871] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [379.362153] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [379.362372] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [379.362557] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.362737] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.362910] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.363156] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [379.363464] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [379.363702] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [379.363940] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.364163] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.364379] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [379.364868] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [379.389587] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [379.389771] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [379.390006] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [379.390171] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [379.390325] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [379.390507] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [379.390648] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [379.390806] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [379.390996] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [379.391179] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [379.391359] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.391557] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.391735] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [379.391932] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [379.394400] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [379.394707] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [379.394855] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [379.394977] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [379.395085] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [379.410240] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [379.411744] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [379.411814] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [379.411857] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [379.412180] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [379.412393] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [379.412593] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.412801] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.413041] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.413254] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [379.413567] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [379.413843] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [379.414107] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.414352] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.414594] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [379.415168] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [379.439771] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [379.439984] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [379.440251] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [379.440559] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [379.440749] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [379.440927] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [379.441098] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [379.441326] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [379.441558] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [379.441777] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [379.441985] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.442184] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.442401] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [379.442634] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [379.444237] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [379.444767] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [379.444972] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [379.445885] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [379.446018] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [379.460258] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [379.461744] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [379.461831] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [379.461875] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [379.462128] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [379.462337] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [379.462532] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.462722] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.462983] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.463193] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [379.463462] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [379.463729] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [379.464105] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.464364] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.464657] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [379.465205] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [379.489496] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [379.489669] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [379.489921] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [379.490131] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [379.490354] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [379.490518] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [379.490669] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [379.490867] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [379.491142] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x200

<7> [379.491366] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [379.491512] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [379.491639] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [379.491767] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [379.491887] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [379.492033] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [379.492248] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [379.492417] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [379.492578] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.492735] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.492883] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [379.493091] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:244

<7> [379.494170] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [379.494688] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [379.494875] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [379.496275] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [379.496391] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [379.510249] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [379.511772] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [379.511838] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [379.511878] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [379.512133] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [379.512337] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [379.512531] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.512746] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.512934] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.513137] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [379.513395] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [379.513644] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [379.513923] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.514153] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.514410] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [379.514896] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [379.528054] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [379.528266] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [379.528587] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [379.528806] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [379.529008] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [379.529205] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [379.529443] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [379.529663] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [379.529936] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [379.530200] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [379.530488] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [379.530745] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [379.531007] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [379.531311] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [379.543580] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [379.545101] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [379.545167] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:434] is removed

<7> [379.545213] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [379.545470] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [379.545727] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [379.545933] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.546174] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.546366] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.546599] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [379.546873] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [379.547178] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [379.547442] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.547704] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.547982] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [379.548540] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [379.561144] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [379.561305] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [379.561539] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [379.561834] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [379.562023] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [379.562261] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [379.562488] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [379.562781] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [379.563054] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [379.563316] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [379.563570] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.563887] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.564142] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [379.564450] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [379.576913] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [379.578394] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [379.578458] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [379.578497] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [379.578737] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [379.578955] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [379.579139] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.579357] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.579535] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.579777] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [379.580042] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [379.580311] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [379.580572] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.580830] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.581123] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [379.581709] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [379.594579] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [379.594762] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [379.595085] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [379.595308] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [379.595518] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [379.595719] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [379.595933] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [379.596162] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [379.596441] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [379.596714] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [379.597010] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.597275] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.597537] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [379.597872] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [379.610232] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [379.611738] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [379.611805] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:434] is removed

<7> [379.611847] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [379.612102] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [379.612310] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [379.612505] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.612768] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.612958] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.613165] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [379.613437] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [379.613718] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [379.613966] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.614210] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.614513] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [379.615115] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [379.634365] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [379.634591] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [379.634871] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [379.635176] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [379.635382] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [379.635607] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67

<7> [379.635802] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68

<7> [379.636084] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1236304 num active planes 1

<7> [379.636364] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1299 qgv_peak_bw: 38400

<7> [379.636634] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1299 qgv_peak_bw: 38400

<7> [379.636897] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [379.637211] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1299 qgv_peak_bw: 38400

<7> [379.637465] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1299

<7> [379.637762] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [379.643559] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [379.645002] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [379.645079] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [379.645139] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [379.645393] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [379.645591] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [379.645774] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.646058] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 27, 287, 287, 287, 287, 287, 0, 0, 41, 53, 67 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.646262] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 31, 317, 317, 317, 317, 317, 0, 0, 42, 60, 68 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.646467] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [379.646741] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [379.647046] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [379.647310] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.647572] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.647842] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [379.648501] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [379.675005] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [379.675229] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [379.675476] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [379.675655] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [379.675809] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [379.675959] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [379.676113] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [379.676307] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [379.676497] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [379.676674] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [379.676847] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.677015] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.677185] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [379.677392] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [379.679189] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [379.679667] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [379.679830] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [379.680554] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [379.680673] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [379.693574] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [379.695280] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [379.695354] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [379.695407] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [379.695701] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [379.696022] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [379.696276] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.696528] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.696745] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.696928] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [379.697195] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [379.697418] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [379.697629] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.697857] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.698057] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [379.698551] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [379.722680] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [379.722868] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [379.723102] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [379.723334] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [379.723488] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [379.723632] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [379.723768] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [379.723948] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [379.724157] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [379.724335] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [379.724507] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.724669] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.724822] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [379.725026] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [379.743557] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [379.745372] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [379.745464] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [379.745529] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [379.745924] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [379.746209] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [379.746477] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.746775] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.747022] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.747267] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [379.747583] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [379.747919] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [379.748201] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.748478] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.748763] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [379.749369] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [379.773225] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [379.773442] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: staged scaling request for 2880x1800->2160x1350 scaler_users = 0x400

<7> [379.773682] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [379.773872] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [379.774057] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0

<7> [379.774220] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111

<7> [379.774371] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112

<7> [379.774570] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2472608 num active planes 1

<7> [379.774790] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2597 qgv_peak_bw: 38400

<7> [379.774985] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2597 qgv_peak_bw: 38400

<7> [379.775191] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.775372] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2597 qgv_peak_bw: 38400

<7> [379.775544] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2597

<7> [379.775773] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:270:pipe B] attached scaler id 1.0 to PLANE:254

<7> [379.777132] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [379.777602] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [379.777819] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [379.778946] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [379.779077] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [379.793541] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [379.795222] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [379.795285] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [379.795327] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:270:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [379.795570] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [379.795836] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [379.796036] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 2, 22, 22, 22, 22, 22, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.796229] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 49, 529, 529, 529, 529, 529, 0, 0, 63, 97, 111 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.796420] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 55, 583, 583, 583, 583, 583, 0, 0, 64, 108, 112 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [379.796634] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [379.796873] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [379.797096] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [379.797317] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.797574] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [379.797781] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [379.798236] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<6> [379.811207] [IGT] kms_plane_scaling: finished subtest pipe-B, SUCCESS

Results for igt@kms_plane_scaling@plane-downscale-factor-0-75-with-pixel-format@pipe-b