igt@kms_plane_scaling@plane-scaler-unity-scaling-with-pixel-format@pipe-b on shard-lnl@xe-4907-259d8b4db2633a121007a389ad6b9bfb1be1f9dd Test details

Detail	Value
Duration	2.94 seconds
Hostname	shard-lnl-5
Igt-Version	IGT-Version: 2.4-g63a08403d (x86_64) (Linux: 7.0.0-lgci-xe-xe-4907-259d8b4db2633a121-debug+ x86_64)
Out	Starting dynamic subtest: pipe-B Trying on eDP-1 Dynamic subtest pipe-B: SUCCESS (2.938s)
Err	Starting dynamic subtest: pipe-B Dynamic subtest pipe-B: SUCCESS (2.938s)
Dmesg	<6> [447.578842] [IGT] kms_plane_scaling: starting dynamic subtest pipe-B <7> [447.581108] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [447.581951] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [447.582151] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:270:pipe B] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [447.582314] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000 <7> [447.582492] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [447.582649] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:270:pipe B] <7> [447.582807] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [447.582965] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [447.583120] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [447.583278] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [447.583458] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0) <7> [447.583620] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [447.583781] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [447.583950] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0) <7> [447.584120] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0) <7> [447.584286] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0) <7> [447.584494] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0) <7> [447.584665] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0) <7> [447.584833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0) <7> [447.585006] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [447.585229] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [447.585434] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [447.585603] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0) <7> [447.585768] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0) <7> [447.585929] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0) <7> [447.586085] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0) <7> [447.586267] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0) <7> [447.586454] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0) <7> [447.586602] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0) <7> [447.586768] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0) <7> [447.586911] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0) <7> [447.587051] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [447.587193] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [447.587329] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [447.587491] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0) <7> [447.587621] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0) <7> [447.587748] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0) <7> [447.587891] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [447.588038] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [447.588160] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [447.588281] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [447.588476] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0) <7> [447.588601] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0) <7> [447.588714] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 432000, found 0) <7> [447.588826] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [447.588940] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.enable (expected no, found yes) <7> [447.589057] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [447.589172] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1) <7> [447.589298] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in lane_count (expected 0, found 4) <7> [447.589441] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288) <7> [447.589550] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [447.589655] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [447.589758] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880) <7> [447.589858] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040) <7> [447.589958] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880) <7> [447.590058] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040) <7> [447.590168] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928) <7> [447.590276] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960) <7> [447.590391] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [447.590494] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [447.590601] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [447.590693] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809) <7> [447.590782] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906) <7> [447.590868] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906) <7> [447.590953] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880) <7> [447.591038] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040) <7> [447.591123] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880) <7> [447.591206] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040) <7> [447.591286] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928) <7> [447.591376] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960) <7> [447.591468] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [447.591561] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [447.591653] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [447.591734] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809) <7> [447.591812] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906) <7> [447.591889] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906) <7> [447.591967] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [447.592043] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [447.592120] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [447.592194] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in dpll_hw_state <7> [447.592267] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7> [447.592340] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [447.592440] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: <7> [447.592535] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000 <7> [447.592639] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [447.592737] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000 <7> [447.592820] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000 <7> [447.592899] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000 <7> [447.592970] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000 <7> [447.593041] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000 <7> [447.593112] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000 <7> [447.593182] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000 <7> [447.593254] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000 <7> [447.593325] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000 <7> [447.593432] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000 <7> [447.593525] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000 <7> [447.593617] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [447.593703] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7> [447.593778] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [447.593850] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: no, <7> [447.593923] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7> [447.593994] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7> [447.594066] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7> [447.594138] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [447.594210] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [447.594283] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [447.594358] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [447.594474] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [447.594571] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [447.594667] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710) <7> [447.594742] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710) <7> [447.594816] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in port_clock (expected 0, found 432000) <7> [447.594889] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] fastset requirement not met, forcing full modeset <7> [447.594963] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0 <7> [447.595073] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x2 <7> [447.595133] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:270:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x1 -> 0x2 <7> [447.595196] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0 <7> [447.595255] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [447.595312] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:264:cursor B] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7> [447.595375] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [447.595407] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [447.595450] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [447.595526] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 <7> [447.595567] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [447.595608] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 <7> [447.595692] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [447.595712] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1 <7> [447.595822] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400 <7> [447.595917] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400 <7> [447.596006] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400 <7> [447.596088] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400 <7> [447.596169] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731 <7> [447.596266] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min cdclk: 173855 kHz -> 0 kHz <7> [447.596347] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:270:pipe B] min cdclk: 0 kHz -> 173855 kHz <7> [447.596481] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 43464 kHz -> 10866 kHz <7> [447.596634] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:270:pipe B] allocated DPLL 0 <7> [447.596734] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:270:pipe B] reserving DPLL 0 <7> [447.596819] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: no [modeset] <7> [447.596901] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [447.596982] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [447.597061] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [447.597141] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [447.597222] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [447.597302] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [447.597389] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: yes [modeset] <7> [447.597493] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [447.597595] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0 <7> [447.597700] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [447.597789] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [447.597876] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [447.597956] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [447.598032] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7> [447.598108] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [447.598183] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7> [447.598257] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [447.598331] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [447.598422] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0 <7> [447.598530] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [447.598642] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [447.598741] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [447.598821] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [447.598896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [447.598969] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [447.599043] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [447.599116] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [447.599189] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [447.599263] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7> [447.599338] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7> [447.599429] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [447.599534] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [447.599633] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [447.599722] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [447.599799] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [447.599874] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [447.599949] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 173855, min voltage level 0 <7> [447.600024] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7> [447.600098] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [447.600173] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0 <7> [447.600248] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [447.600322] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [447.600409] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [447.600515] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [447.600626] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no, <7> [447.600719] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7> [447.600804] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [447.600876] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [447.600948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [447.601021] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [447.601093] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [447.601165] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [447.601237] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [447.601310] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [447.601388] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [447.601492] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [447.601600] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [447.601701] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [447.601776] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [447.601852] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [447.601934] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [447.602015] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [447.602086] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [447.602157] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [447.602227] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [447.602298] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:154:plane 1B] fb: [FB:432] 2880x1800 format = RG16 little-endian (0x36314752) modifier = 0x0, visible: yes <7> [447.602375] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [447.602465] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7> [447.602559] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:184:plane 2B] fb: [NOFB], visible: no <7> [447.602652] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:214:plane 3B] fb: [NOFB], visible: no <7> [447.602730] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:244:plane 4B] fb: [NOFB], visible: no <7> [447.602804] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:254:plane 5B] fb: [NOFB], visible: no <7> [447.602880] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:264:cursor B] fb: [NOFB], visible: no <7> [447.603702] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [447.603800] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [447.603941] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [447.604075] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [447.604214] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000) <7> [447.604392] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [447.604498] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [447.812580] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0 <7> [447.813189] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [447.828736] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off <7> [447.829086] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time <7> [447.829508] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [447.829868] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short <7> [447.830320] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [447.881421] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [447.881842] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short <7> [447.888612] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [447.888983] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A] <7> [447.889042] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A] <7> [447.889788] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A] <7> [447.890534] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [447.891084] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [447.891625] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A] <7> [447.891965] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1] <7> [447.892266] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A] <7> [447.892657] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B] <7> [447.893003] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C] <7> [447.893330] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2] <7> [447.893696] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A] <7> [447.894002] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B] <7> [447.894304] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C] <7> [447.894656] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3] <7> [447.895026] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A] <7> [447.895386] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B] <7> [447.895718] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C] <7> [447.896056] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:402:DP-1] <7> [447.896384] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:414:DP-2] <7> [447.896682] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:422:DP-3] <7> [447.897055] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7> [447.897447] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [447.899256] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:270:pipe B] <7> [447.899790] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [447.902223] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on <7> [447.902601] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (487 ms remaining) <7> [447.918889] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [447.919297] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long <7> [447.919684] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [447.920102] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A] <7> [448.396620] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [448.427368] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [448.427825] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on <7> [448.428271] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7> [448.464679] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [448.465154] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long <7> [448.465629] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7> [448.466397] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A] <7> [448.637278] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [448.637756] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on <7> [448.638065] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7> [448.640119] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [448.641680] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [448.642531] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7> [448.643730] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [448.645167] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [448.646351] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK <7> [448.646784] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7> [448.648286] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [448.648752] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7> [448.649575] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe B <7> [448.650100] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [448.650471] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe B <7> [448.650907] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 4518 <7> [448.666992] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [448.667497] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000) <7> [448.667978] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A] <7> [448.668351] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [448.669945] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1] <7> [448.670346] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:270:pipe B] <7> [448.674191] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe B <7> [448.674637] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [448.674744] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [448.674884] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [448.675191] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [448.675523] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.675805] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.676076] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.676377] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [448.676735] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [448.677075] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [448.677413] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [448.677720] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [448.678060] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [448.678870] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [448.684888] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [448.685140] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [448.685424] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [448.685638] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [448.685838] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [448.686049] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [448.686259] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [448.686546] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [448.686796] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [448.687040] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [448.687279] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [448.687606] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [448.687920] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 10866 kHz -> 21732 kHz <7> [448.700178] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [448.701915] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [448.701988] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:434] is removed <7> [448.702067] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [448.702437] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [448.702710] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.702974] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.703258] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.703572] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [448.703893] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [448.704209] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [448.704529] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [448.704814] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [448.705097] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [448.705723] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [448.718162] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [448.718693] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [448.719102] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [448.719493] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [448.719790] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [448.720115] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [448.720450] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [448.720821] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [448.721175] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [448.721533] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [448.721853] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [448.722150] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [448.733526] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [448.735301] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [448.735419] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [448.735521] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [448.735859] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [448.736148] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.736484] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.736745] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.737091] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [448.737571] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [448.737918] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [448.738256] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [448.738674] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [448.738997] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [448.739662] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [448.752265] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [448.752582] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [448.752888] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [448.753158] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [448.753477] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 46, 599, 599, 599, 599, 599, 0, 0, 60, 139, 153 <7> [448.753769] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 52, 660, 660, 660, 660, 660, 0, 0, 61, 154, 154 <7> [448.754093] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2781680 num active planes 1 <7> [448.754489] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400 <7> [448.754834] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400 <7> [448.755166] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400 <7> [448.755503] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400 <7> [448.755852] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921 <7> [448.756210] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 21732 kHz -> 43464 kHz <7> [448.766852] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [448.768619] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [448.768721] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:434] is removed <7> [448.768826] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [448.769145] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [448.769443] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.769687] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 46, 599, 599, 599, 599, 599, 0, 0, 60, 139, 153 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.769974] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 52, 660, 660, 660, 660, 660, 0, 0, 61, 154, 154 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.770261] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [448.770681] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [448.770999] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [448.771293] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [448.771643] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [448.771913] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [448.772571] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [448.791413] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [448.791634] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [448.791866] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [448.792086] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [448.792294] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 <7> [448.792593] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 <7> [448.792834] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1 <7> [448.793161] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400 <7> [448.793521] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400 <7> [448.793816] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400 <7> [448.794104] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400 <7> [448.794389] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731 <7> [448.800175] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [448.801842] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [448.801913] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [448.801985] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [448.802250] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [448.802669] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.802984] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.803234] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.803487] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [448.803754] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [448.804012] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [448.804259] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [448.804558] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [448.804784] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [448.805313] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [448.823966] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [448.824244] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B] <7> [448.824720] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1385), size 0 -> 1385 <7> [448.825076] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1385 - 4051), size 0 -> 2666 <7> [448.825362] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [448.825647] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [448.825886] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 92, 92, 92, 92, 92, 0, 0, 25, 22, 36 <7> [448.826114] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 103, 103, 103, 103, 103, 0, 0, 26, 26, 37 <7> [448.826376] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [448.826605] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [448.826815] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 92, 92, 92, 92, 92, 0, 0, 21, 22, 36 <7> [448.827012] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 103, 103, 103, 103, 103, 0, 0, 22, 26, 37 <7> [448.827226] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1043130 num active planes 2 <7> [448.827529] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1096 qgv_peak_bw: 38400 <7> [448.827805] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1096 qgv_peak_bw: 38400 <7> [448.828060] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1096 qgv_peak_bw: 38400 <7> [448.828330] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1096 qgv_peak_bw: 38400 <7> [448.828607] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1096 <7> [448.833450] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [448.834744] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [448.834787] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [448.834837] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 1385) -> ( 0 - 0), size 1385 -> 0 <7> [448.834972] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1385 - 4051) -> ( 0 - 0), size 2666 -> 0 <7> [448.835096] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [448.835386] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.835645] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 11, 92, 92, 92, 92, 92, 0, 0, 25, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.835948] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 14, 103, 103, 103, 103, 103, 0, 0, 26, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.836165] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [448.836268] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.836416] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 7, 92, 92, 92, 92, 92, 0, 0, 21, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.836518] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 9, 103, 103, 103, 103, 103, 0, 0, 22, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.836630] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [448.836788] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [448.836939] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [448.837089] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [448.837232] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [448.837387] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [448.837743] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [448.861874] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [448.862082] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B] <7> [448.862403] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1413), size 0 -> 1413 <7> [448.862664] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1413 - 4051), size 0 -> 2638 <7> [448.862858] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [448.863033] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [448.863204] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 170, 170, 170, 170, 170, 0, 0, 33, 40, 54 <7> [448.863438] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 188, 188, 188, 188, 188, 0, 0, 34, 45, 55 <7> [448.863600] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [448.863748] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [448.863890] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 <7> [448.864026] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 <7> [448.864184] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2086260 num active planes 2 <7> [448.864416] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400 <7> [448.864621] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400 <7> [448.864812] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400 <7> [448.865034] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400 <7> [448.865228] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191 <7> [448.867376] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [448.867938] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [448.868108] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [448.868421] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [448.868566] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [448.883492] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [448.885059] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [448.885119] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [448.885206] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 1413) -> ( 0 - 0), size 1413 -> 0 <7> [448.885631] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1413 - 4051) -> ( 0 - 0), size 2638 -> 0 <7> [448.885944] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [448.886196] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.886407] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 19, 170, 170, 170, 170, 170, 0, 0, 33, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.886575] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 22, 188, 188, 188, 188, 188, 0, 0, 34, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.886762] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [448.886934] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.887096] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.887269] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.887475] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [448.887692] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [448.887896] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [448.888099] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [448.888293] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [448.888516] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [448.888985] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [448.913748] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [448.913991] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [448.914233] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [448.914479] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [448.914657] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [448.914854] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [448.915051] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [448.915410] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [448.915561] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [448.915703] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [448.915839] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [448.915969] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [448.916105] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [448.916311] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [448.916503] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [448.916689] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [448.916866] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [448.917072] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [448.917360] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [448.917831] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [448.918008] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [448.919432] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [448.919579] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [448.933498] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [448.935222] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [448.935345] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [448.935448] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [448.935783] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [448.936085] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.936392] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.936629] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.936908] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [448.937224] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [448.937547] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [448.937832] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [448.938099] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [448.938378] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [448.938978] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [448.965179] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [448.965410] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [448.965624] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [448.965789] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [448.965945] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [448.966095] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [448.966264] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [448.966540] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [448.966727] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [448.966903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [448.967079] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [448.967246] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [448.968333] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [448.968704] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [448.968889] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [448.969537] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [448.969680] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [448.983480] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [448.985120] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [448.985206] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [448.985330] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [448.985642] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [448.985921] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.986177] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.986416] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [448.986620] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [448.986885] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [448.987143] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [448.987436] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [448.987674] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [448.987894] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [448.988420] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.015669] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [449.015875] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.016109] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.016313] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.016487] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [449.016674] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [449.016878] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [449.017112] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [449.017336] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [449.017358] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [449.017535] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [449.017612] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [449.017725] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [449.017812] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [449.017919] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [449.020121] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [449.020276] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [449.033457] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.035248] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [449.035361] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [449.035482] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [449.035819] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.036122] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.036460] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.036703] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.036975] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.037320] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.037621] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.037909] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.038191] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.038481] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.039115] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.067356] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [449.067612] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [449.067794] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [449.072578] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [449.072669] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.072755] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.072833] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.072906] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 46, 599, 599, 599, 599, 599, 0, 0, 60, 139, 153 <7> [449.072968] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 52, 660, 660, 660, 660, 660, 0, 0, 61, 154, 154 <7> [449.073039] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2781680 num active planes 1 <7> [449.073141] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400 <7> [449.073239] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400 <7> [449.073341] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400 <7> [449.073437] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400 <7> [449.073530] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921 <7> [449.076329] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [449.076439] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [449.083424] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.084767] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [449.084830] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed <7> [449.084896] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [449.085109] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.085309] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.085495] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 46, 599, 599, 599, 599, 599, 0, 0, 60, 139, 153 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.085680] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 52, 660, 660, 660, 660, 660, 0, 0, 61, 154, 154 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.085865] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.086097] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.086201] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.086313] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.086412] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.086509] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.086752] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.101365] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [449.101570] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.101776] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.101946] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.102115] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 <7> [449.102271] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 <7> [449.102482] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1 <7> [449.102698] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400 <7> [449.102900] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400 <7> [449.103094] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400 <7> [449.103290] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400 <7> [449.103470] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731 <7> [449.116815] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.118429] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [449.118520] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:434] is removed <7> [449.118619] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [449.118926] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.119172] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.119393] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.119560] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.119786] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.120064] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.120387] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.120654] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.120919] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.121234] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.121981] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.134749] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [449.135122] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.135547] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.135934] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.136215] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [449.136564] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [449.136862] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [449.137251] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [449.137691] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [449.138063] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [449.138456] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [449.138840] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [449.150137] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.151840] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [449.151924] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [449.152013] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [449.152353] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.152632] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.152923] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.153187] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.153500] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.153878] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.154213] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.154589] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.154882] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.155163] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.155878] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.168074] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [449.168396] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.168736] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.169036] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.169345] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [449.169659] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [449.169969] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [449.170353] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [449.170678] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [449.170992] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [449.171357] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [449.171649] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [449.183430] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.185189] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [449.185300] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:434] is removed <7> [449.185397] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [449.185706] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.185984] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.186275] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.186635] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.186929] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.187306] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.187626] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.187929] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.188213] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.188519] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.189163] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.202541] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [449.202879] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.203317] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.203698] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.204025] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 46, 599, 599, 599, 599, 599, 0, 0, 60, 139, 153 <7> [449.204342] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 52, 660, 660, 660, 660, 660, 0, 0, 61, 154, 154 <7> [449.204646] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2781680 num active planes 1 <7> [449.205032] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400 <7> [449.205427] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400 <7> [449.205817] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400 <7> [449.206148] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400 <7> [449.206526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921 <7> [449.216815] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.218601] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [449.218687] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [449.218778] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [449.219088] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.219404] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.219697] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 46, 599, 599, 599, 599, 599, 0, 0, 60, 139, 153 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.219964] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 52, 660, 660, 660, 660, 660, 0, 0, 61, 154, 154 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.220231] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.220652] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.220973] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.221300] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.221587] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.221871] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.222594] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.241198] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [449.241443] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.241660] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.241855] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.242042] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 <7> [449.242251] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 <7> [449.242529] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1 <7> [449.242929] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.243118] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.243320] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.243542] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 <7> [449.243728] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 <7> [449.243921] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1 <7> [449.244209] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400 <7> [449.244547] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400 <7> [449.244863] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400 <7> [449.245126] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400 <7> [449.245394] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731 <7> [449.250089] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.251692] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [449.251776] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [449.251869] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [449.252170] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.252440] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.252648] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.252871] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.253076] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.253286] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.253465] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.253631] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.253796] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.253954] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.254374] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.274557] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [449.274817] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B] <7> [449.275233] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1385), size 0 -> 1385 <7> [449.275604] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1385 - 4051), size 0 -> 2666 <7> [449.275861] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.276132] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.276433] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 92, 92, 92, 92, 92, 0, 0, 25, 22, 36 <7> [449.276681] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 103, 103, 103, 103, 103, 0, 0, 26, 26, 37 <7> [449.276891] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.277096] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.277301] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 92, 92, 92, 92, 92, 0, 0, 21, 22, 36 <7> [449.277487] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 103, 103, 103, 103, 103, 0, 0, 22, 26, 37 <7> [449.277702] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1043130 num active planes 2 <7> [449.278069] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B] <7> [449.278296] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1385), size 0 -> 1385 <7> [449.278458] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1385 - 4051), size 0 -> 2666 <7> [449.278617] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.278772] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.278920] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 92, 92, 92, 92, 92, 0, 0, 25, 22, 36 <7> [449.279069] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 103, 103, 103, 103, 103, 0, 0, 26, 26, 37 <7> [449.279219] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.279397] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.279537] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 92, 92, 92, 92, 92, 0, 0, 21, 22, 36 <7> [449.279672] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 103, 103, 103, 103, 103, 0, 0, 22, 26, 37 <7> [449.279809] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1043130 num active planes 2 <7> [449.280084] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B] <7> [449.280241] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1385), size 0 -> 1385 <7> [449.280404] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1385 - 4051), size 0 -> 2666 <7> [449.280521] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.280632] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.280743] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 92, 92, 92, 92, 92, 0, 0, 25, 22, 36 <7> [449.280852] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 103, 103, 103, 103, 103, 0, 0, 26, 26, 37 <7> [449.280957] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.281064] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.281172] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 92, 92, 92, 92, 92, 0, 0, 21, 22, 36 <7> [449.281287] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 103, 103, 103, 103, 103, 0, 0, 22, 26, 37 <7> [449.281397] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1043130 num active planes 2 <7> [449.281570] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1096 qgv_peak_bw: 38400 <7> [449.281734] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1096 qgv_peak_bw: 38400 <7> [449.281891] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1096 qgv_peak_bw: 38400 <7> [449.282043] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1096 qgv_peak_bw: 38400 <7> [449.282209] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1096 <7> [449.300075] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.301575] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [449.301662] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [449.301760] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 1385) -> ( 0 - 0), size 1385 -> 0 <7> [449.302058] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1385 - 4051) -> ( 0 - 0), size 2666 -> 0 <7> [449.302222] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.302398] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.302539] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 11, 92, 92, 92, 92, 92, 0, 0, 25, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.302693] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 14, 103, 103, 103, 103, 103, 0, 0, 26, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.302848] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.302981] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.303107] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 7, 92, 92, 92, 92, 92, 0, 0, 21, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.303224] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 9, 103, 103, 103, 103, 103, 0, 0, 22, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.303386] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.303603] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.303799] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.303971] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.304141] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.304312] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.304722] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.329086] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [449.329356] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B] <7> [449.329707] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1413), size 0 -> 1413 <7> [449.330020] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1413 - 4051), size 0 -> 2638 <7> [449.330248] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.330514] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.330726] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 170, 170, 170, 170, 170, 0, 0, 33, 40, 54 <7> [449.330955] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 188, 188, 188, 188, 188, 0, 0, 34, 45, 55 <7> [449.331151] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.331363] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.331535] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 <7> [449.331697] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 <7> [449.331887] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2086260 num active planes 2 <7> [449.332147] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400 <7> [449.332414] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400 <7> [449.332644] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400 <7> [449.332869] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400 <7> [449.333094] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191 <7> [449.334327] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [449.334800] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [449.335010] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [449.336371] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [449.336526] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [449.350110] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.351798] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [449.351868] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [449.351951] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 1413) -> ( 0 - 0), size 1413 -> 0 <7> [449.352193] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1413 - 4051) -> ( 0 - 0), size 2638 -> 0 <7> [449.352544] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.352813] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.353070] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 19, 170, 170, 170, 170, 170, 0, 0, 33, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.353267] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 22, 188, 188, 188, 188, 188, 0, 0, 34, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.353508] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.353674] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.353868] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.354045] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.354237] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.354513] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.354753] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.354976] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.355234] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.355479] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.355992] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.380380] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [449.380586] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.380808] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.380994] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.381170] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [449.381388] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [449.381575] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [449.381844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [449.382065] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [449.382276] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [449.382474] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [449.382660] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [449.384426] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [449.384723] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [449.384928] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [449.385090] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [449.385234] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [449.400096] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.401956] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [449.402046] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [449.402142] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [449.402507] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.402790] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.403057] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.403401] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.403677] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.404028] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.404379] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.404695] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.405001] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.405350] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.406018] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.432007] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [449.432204] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.432471] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.432650] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.432813] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [449.432987] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [449.433161] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [449.433400] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [449.433598] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [449.433791] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [449.433972] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [449.434160] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [449.435333] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [449.435779] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [449.435964] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [449.436522] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [449.436678] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [449.450078] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.451894] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [449.451968] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [449.452045] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [449.452379] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.452660] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.452928] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.453211] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.453482] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.453770] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.454047] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.454342] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.454583] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.454816] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.455406] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.481453] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [449.481651] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.481872] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.482059] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.482230] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [449.482434] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [449.482614] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [449.482870] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [449.483079] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [449.483278] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [449.483465] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [449.483643] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [449.484345] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [449.484786] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [449.484980] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [449.486029] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [449.486164] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [449.500070] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.501789] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [449.501867] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [449.501947] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [449.502235] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.502609] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.502885] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.503171] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.503450] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.503735] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.504009] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.504310] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.504558] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.504795] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.505335] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.534315] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [449.534593] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [449.534783] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [449.539492] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [449.539591] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.539693] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.539764] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.539831] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 46, 599, 599, 599, 599, 599, 0, 0, 60, 139, 153 <7> [449.539897] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 52, 660, 660, 660, 660, 660, 0, 0, 61, 154, 154 <7> [449.539971] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2781680 num active planes 1 <7> [449.540063] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400 <7> [449.540153] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400 <7> [449.540240] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400 <7> [449.540347] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400 <7> [449.540441] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921 <7> [449.543258] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [449.543383] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [449.550035] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.551328] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [449.551426] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed <7> [449.551519] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [449.551847] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.552101] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.552203] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 46, 599, 599, 599, 599, 599, 0, 0, 60, 139, 153 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.552300] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 52, 660, 660, 660, 660, 660, 0, 0, 61, 154, 154 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.552383] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.552496] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.552608] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.552715] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.552806] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.552895] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.553121] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.567787] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [449.568008] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.568381] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.568734] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.568892] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 <7> [449.569042] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 <7> [449.569233] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1 <7> [449.569483] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400 <7> [449.569685] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400 <7> [449.569877] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400 <7> [449.570098] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400 <7> [449.570305] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731 <7> [449.583416] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.585039] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [449.585103] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:434] is removed <7> [449.585189] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [449.585597] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.585876] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.586151] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.586403] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.586639] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.586959] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.587278] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.587592] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.587947] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.588334] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.589101] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.601353] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [449.601646] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.601995] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.602377] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.602687] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [449.603030] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [449.603356] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [449.603887] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.604187] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.604500] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.604756] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [449.604997] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [449.605248] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [449.605666] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [449.606024] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [449.606365] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [449.606671] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [449.606967] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [449.616694] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.618220] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [449.618331] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [449.618430] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [449.618739] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.619013] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.619218] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.619421] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.619602] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.619868] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.620086] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.620303] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.620500] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.620689] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.621147] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.634664] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [449.635232] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.635642] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.635976] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.636284] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [449.636559] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [449.636918] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [449.637311] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [449.637660] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [449.637991] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [449.638326] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [449.638633] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [449.650042] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.651831] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [449.651921] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:434] is removed <7> [449.652017] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [449.652378] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.652659] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.652927] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.653230] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.653564] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.653917] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.654252] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.654621] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.654926] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.655217] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.655962] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.668653] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [449.668926] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.669215] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.669549] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.669807] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 46, 599, 599, 599, 599, 599, 0, 0, 60, 139, 153 <7> [449.670073] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 52, 660, 660, 660, 660, 660, 0, 0, 61, 154, 154 <7> [449.670395] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2781680 num active planes 1 <7> [449.670804] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400 <7> [449.671172] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400 <7> [449.671564] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400 <7> [449.671926] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400 <7> [449.672338] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921 <7> [449.683411] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.685139] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [449.685223] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [449.685332] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [449.685614] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.685870] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.686116] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 46, 599, 599, 599, 599, 599, 0, 0, 60, 139, 153 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.686445] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 52, 660, 660, 660, 660, 660, 0, 0, 61, 154, 154 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.686704] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.687029] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.687356] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.687651] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.687935] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.688209] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.688886] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.707620] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [449.707809] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.708033] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.708236] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.708497] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 <7> [449.708693] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 <7> [449.708941] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1 <7> [449.709224] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400 <7> [449.709510] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400 <7> [449.709759] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400 <7> [449.710004] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400 <7> [449.710283] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731 <7> [449.716682] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.718468] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [449.718562] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [449.718665] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [449.718974] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.719213] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.719484] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.719664] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.719902] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.720179] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.720449] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.720686] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.720910] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.721132] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.721740] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.740130] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [449.740379] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B] <7> [449.740673] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1385), size 0 -> 1385 <7> [449.740875] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1385 - 4051), size 0 -> 2666 <7> [449.741070] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.741275] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.741449] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 92, 92, 92, 92, 92, 0, 0, 25, 22, 36 <7> [449.741612] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 103, 103, 103, 103, 103, 0, 0, 26, 26, 37 <7> [449.741796] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.741969] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.742145] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 92, 92, 92, 92, 92, 0, 0, 21, 22, 36 <7> [449.742338] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 103, 103, 103, 103, 103, 0, 0, 22, 26, 37 <7> [449.742506] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1043130 num active planes 2 <7> [449.742755] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1096 qgv_peak_bw: 38400 <7> [449.742957] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1096 qgv_peak_bw: 38400 <7> [449.743144] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1096 qgv_peak_bw: 38400 <7> [449.743342] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1096 qgv_peak_bw: 38400 <7> [449.743543] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1096 <7> [449.750021] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.751676] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [449.751770] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [449.751894] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 1385) -> ( 0 - 0), size 1385 -> 0 <7> [449.752195] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1385 - 4051) -> ( 0 - 0), size 2666 -> 0 <7> [449.752391] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.752524] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.752652] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 11, 92, 92, 92, 92, 92, 0, 0, 25, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.752789] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 14, 103, 103, 103, 103, 103, 0, 0, 26, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.752927] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.753049] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.753158] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 7, 92, 92, 92, 92, 92, 0, 0, 21, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.753282] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 9, 103, 103, 103, 103, 103, 0, 0, 22, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.753408] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.753574] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.753736] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.753890] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.754042] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.754215] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.754641] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.776055] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [449.776278] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B] <7> [449.776507] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1413), size 0 -> 1413 <7> [449.776663] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1413 - 4051), size 0 -> 2638 <7> [449.776808] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.776947] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.777085] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 170, 170, 170, 170, 170, 0, 0, 33, 40, 54 <7> [449.777218] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 188, 188, 188, 188, 188, 0, 0, 34, 45, 55 <7> [449.777398] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.777522] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.777641] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 <7> [449.777752] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 <7> [449.777882] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2086260 num active planes 2 <7> [449.778047] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400 <7> [449.778222] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400 <7> [449.778408] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400 <7> [449.778553] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400 <7> [449.778692] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191 <7> [449.783438] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.784691] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [449.784731] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [449.784776] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 1413) -> ( 0 - 0), size 1413 -> 0 <7> [449.784865] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1413 - 4051) -> ( 0 - 0), size 2638 -> 0 <7> [449.784942] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.785008] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.785072] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 19, 170, 170, 170, 170, 170, 0, 0, 33, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.785148] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 22, 188, 188, 188, 188, 188, 0, 0, 34, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.785325] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.785474] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.785598] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.785718] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.785862] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.786058] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.786166] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.786269] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.786381] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.786491] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.786755] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.810152] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [449.810378] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.810578] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.810732] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.810877] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [449.811018] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [449.811178] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [449.811427] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [449.811610] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [449.811783] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [449.811947] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [449.812107] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [449.816736] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.818024] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [449.818063] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [449.818112] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [449.818399] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.818677] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.818973] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.819180] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.819300] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.819429] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.819552] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.819668] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.819780] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.819889] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.820184] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.844307] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [449.844493] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.844669] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.844804] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.844930] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [449.845053] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [449.845196] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [449.845417] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [449.845591] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [449.845742] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [449.845884] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [449.846023] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [449.850059] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.851522] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [449.851616] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [449.851715] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [449.852018] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.852164] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.852240] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.852348] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.852440] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.852572] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.852693] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.852803] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.852899] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.852994] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.853265] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.876450] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [449.876669] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.876908] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.877056] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.877202] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [449.877425] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [449.877595] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [449.877876] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.878018] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.878148] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.878287] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [449.878406] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [449.878532] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [449.878709] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [449.878856] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [449.878999] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [449.879139] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [449.879307] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [449.883391] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.884697] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [449.884746] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [449.884802] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [449.884957] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.885075] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.885202] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.885406] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.885572] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.885783] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.885987] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.886160] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.886279] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.886390] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.886690] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.916207] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [449.916317] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.916426] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.916516] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.916602] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 46, 599, 599, 599, 599, 599, 0, 0, 60, 139, 153 <7> [449.916684] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 52, 660, 660, 660, 660, 660, 0, 0, 61, 154, 154 <7> [449.916767] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2781680 num active planes 1 <7> [449.916880] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400 <7> [449.916992] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400 <7> [449.917090] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400 <7> [449.917175] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400 <7> [449.917266] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921 <7> [449.918284] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [449.918614] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [449.918761] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [449.920194] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [449.920471] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [449.933460] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.934987] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [449.935032] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed <7> [449.935083] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [449.935216] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.935555] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.935873] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 46, 599, 599, 599, 599, 599, 0, 0, 60, 139, 153 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.936153] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 52, 660, 660, 660, 660, 660, 0, 0, 61, 154, 154 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.936287] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.936441] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.936588] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.936727] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.936864] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.936997] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.937370] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.951047] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [449.951337] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.951588] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.951806] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.952005] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 <7> [449.952232] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 <7> [449.952567] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1 <7> [449.952862] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400 <7> [449.953102] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400 <7> [449.953355] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400 <7> [449.953588] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400 <7> [449.953806] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731 <7> [449.966663] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [449.968433] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [449.968532] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:434] is removed <7> [449.968641] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [449.968981] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [449.969234] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.969512] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.969734] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [449.969999] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [449.970334] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [449.970669] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [449.971014] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.971371] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [449.971711] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [449.972794] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [449.984716] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [449.985104] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [449.985561] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [449.985941] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [449.986221] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [449.986610] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [449.986906] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [449.987280] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [449.987608] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [449.987921] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [449.988281] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [449.988566] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [450.000012] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [450.001748] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [450.001838] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [450.001950] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [450.002292] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [450.002605] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.002920] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.003191] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.003440] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [450.003703] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [450.003945] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [450.004181] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.004488] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.004703] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [450.005256] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [450.017872] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [450.018122] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [450.018440] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [450.018679] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [450.018901] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [450.019153] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [450.019427] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [450.019745] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [450.020006] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [450.020279] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [450.020517] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [450.020753] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [450.033324] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [450.034987] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [450.035060] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:434] is removed <7> [450.035136] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [450.035506] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [450.035815] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.036102] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.036361] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.036567] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [450.036820] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [450.037061] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [450.037302] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.037524] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.037769] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [450.038271] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [450.058767] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [450.059051] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [450.059397] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [450.059652] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [450.059896] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 <7> [450.060131] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 <7> [450.060449] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1 <7> [450.060755] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400 <7> [450.061036] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400 <7> [450.061325] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400 <7> [450.061584] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400 <7> [450.061881] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731 <7> [450.066619] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [450.068122] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [450.068183] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [450.068358] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [450.068663] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [450.068944] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.069191] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.069384] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.069559] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [450.069771] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [450.069978] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [450.070175] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.070397] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.070574] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [450.070991] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [450.098006] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [450.098208] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [450.098437] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [450.098595] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [450.098741] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [450.098882] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [450.099036] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [450.099267] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [450.099446] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [450.099618] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [450.099784] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [450.099942] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [450.101392] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [450.101802] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [450.101955] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [450.102199] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [450.102352] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [450.116612] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [450.118322] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [450.118427] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [450.118533] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [450.118877] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [450.119145] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.119395] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.119588] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.119829] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [450.120105] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [450.120377] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [450.120616] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.120852] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.121075] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [450.121622] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [450.146830] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [450.147079] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [450.147349] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [450.147531] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [450.147700] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [450.147861] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [450.148077] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [450.148336] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [450.148541] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [450.148738] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [450.148924] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [450.149109] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [450.151285] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [450.151463] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [450.151602] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [450.151757] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [450.151890] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [450.166622] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [450.168309] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [450.168407] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [450.168513] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [450.168905] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [450.169168] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.169414] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.169595] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.169797] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [450.170106] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [450.170378] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [450.170615] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.170877] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.171101] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [450.171639] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [450.198243] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [450.198479] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [450.198718] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [450.198900] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [450.199070] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [450.199242] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [450.199422] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [450.199723] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [450.199869] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [450.200001] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [450.200132] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [450.200281] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [450.200413] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [450.200596] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [450.200771] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [450.200940] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [450.201109] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [450.201280] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [450.201353] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [450.201853] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [450.202055] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [450.203619] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [450.203760] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [450.216621] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [450.218448] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [450.218540] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed <7> [450.218639] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [450.218956] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [450.219314] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.219532] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.219752] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.219968] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [450.220268] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [450.220534] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [450.220841] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.221094] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.221395] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [450.221942] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [450.234655] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [450.234971] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [450.235544] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [450.235842] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [450.236092] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 <7> [450.236374] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 <7> [450.236648] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1 <7> [450.237130] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [450.237410] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [450.237620] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [450.237811] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 <7> [450.237996] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 <7> [450.238190] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1 <7> [450.238611] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [450.238791] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [450.238960] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [450.239162] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 <7> [450.239371] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 <7> [450.239545] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1 <7> [450.239783] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400 <7> [450.240019] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400 <7> [450.240258] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400 <7> [450.240518] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400 <7> [450.240738] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731 <7> [450.249917] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [450.251171] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [450.251329] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:434] is removed <7> [450.251429] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [450.251743] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [450.252023] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.252215] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.252325] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.252421] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [450.252559] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [450.252688] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [450.252799] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.252908] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.253015] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [450.253314] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [450.267577] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [450.267782] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [450.267997] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [450.268170] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [450.268393] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [450.268566] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [450.268763] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [450.269033] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [450.269265] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [450.269475] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [450.269676] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [450.269876] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [450.283341] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [450.284924] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [450.284988] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [450.285062] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [450.285371] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [450.285659] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.285933] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.286230] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.286433] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [450.286703] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [450.286941] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [450.287175] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.287436] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.287651] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [450.288156] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [450.301092] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434] <7> [450.301478] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [450.301909] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [450.302188] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [450.302440] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [450.302637] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [450.302891] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [450.303185] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [450.303497] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [450.303763] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [450.304012] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [450.304314] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [450.316573] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [450.318134] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl <7> [450.318253] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:434] is removed <7> [450.318340] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [450.318576] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [450.318797] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.319031] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.319229] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.319419] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [450.319674] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [450.319910] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [450.320139] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.320446] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.320667] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [450.321170] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [450.342186] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [450.342546] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [450.342897] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [450.343242] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [450.343504] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 <7> [450.343801] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 <7> [450.344081] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1 <7> [450.344455] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400 <7> [450.344768] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400 <7> [450.345063] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400 <7> [450.345371] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400 <7> [450.345639] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731 <7> [450.349984] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [450.351590] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [450.351682] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [450.351777] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [450.352083] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [450.352262] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.352420] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.352594] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.352779] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [450.353023] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [450.353240] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [450.353433] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.353621] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.353834] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [450.354334] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [450.381815] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [450.382043] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [450.382267] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [450.382413] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [450.382554] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [450.382684] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [450.382860] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [450.383070] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [450.383263] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [450.383434] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [450.383599] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [450.383783] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [450.384268] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [450.384655] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [450.384849] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [450.386134] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [450.386277] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [450.399930] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [450.401825] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [450.401923] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [450.402027] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [450.402386] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [450.402667] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.402932] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.403212] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.403513] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [450.403799] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [450.404073] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [450.404358] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.404609] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.404849] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [450.405485] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [450.431639] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [450.431886] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [450.432111] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [450.432316] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [450.432480] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [450.432638] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [450.432811] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [450.433015] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [450.433219] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [450.433406] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [450.433582] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [450.433754] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [450.434260] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [450.434482] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [450.434692] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [450.436723] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [450.436847] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [450.449929] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [450.451798] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [450.451880] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [450.451968] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [450.452343] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [450.452603] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.452844] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.453103] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.453327] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [450.453578] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [450.453812] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [450.454036] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.454295] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.454516] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [450.455063] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [450.481121] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433] <7> [450.481376] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [450.481609] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [450.481782] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [450.481943] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [450.482119] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [450.482358] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1 <7> [450.482600] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [450.482807] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [450.482991] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [450.483202] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [450.483418] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [450.484362] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [450.484751] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [450.484949] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [450.485795] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [450.485941] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [450.499922] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [450.501738] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl <7> [450.501825] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed <7> [450.501919] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [450.502240] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [450.502461] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.502670] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.502885] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [450.503111] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0 <7> [450.503419] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [450.503681] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [450.503977] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.504227] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [450.504458] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [450.504996] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <6> [450.517750] [IGT] kms_plane_scaling: finished subtest pipe-B, SUCCESS

<6> [447.578842] [IGT] kms_plane_scaling: starting dynamic subtest pipe-B

<7> [447.581108] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [447.581951] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [447.582151] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:270:pipe B] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [447.582314] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000

<7> [447.582492] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [447.582649] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:270:pipe B]

<7> [447.582807] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [447.582965] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [447.583120] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [447.583278] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [447.583458] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)

<7> [447.583620] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [447.583781] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [447.583950] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)

<7> [447.584120] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)

<7> [447.584286] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)

<7> [447.584494] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)

<7> [447.584665] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)

<7> [447.584833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)

<7> [447.585006] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [447.585229] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [447.585434] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [447.585603] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)

<7> [447.585768] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)

<7> [447.585929] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)

<7> [447.586085] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)

<7> [447.586267] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)

<7> [447.586454] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)

<7> [447.586602] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)

<7> [447.586768] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)

<7> [447.586911] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)

<7> [447.587051] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [447.587193] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [447.587329] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [447.587491] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)

<7> [447.587621] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)

<7> [447.587748] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)

<7> [447.587891] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [447.588038] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [447.588160] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [447.588281] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [447.588476] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)

<7> [447.588601] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)

<7> [447.588714] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 432000, found 0)

<7> [447.588826] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [447.588940] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.enable (expected no, found yes)

<7> [447.589057] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [447.589172] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1)

<7> [447.589298] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in lane_count (expected 0, found 4)

<7> [447.589441] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)

<7> [447.589550] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [447.589655] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [447.589758] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)

<7> [447.589858] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)

<7> [447.589958] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)

<7> [447.590058] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)

<7> [447.590168] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)

<7> [447.590276] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)

<7> [447.590391] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [447.590494] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [447.590601] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [447.590693] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)

<7> [447.590782] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)

<7> [447.590868] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)

<7> [447.590953] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)

<7> [447.591038] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)

<7> [447.591123] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)

<7> [447.591206] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)

<7> [447.591286] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)

<7> [447.591376] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)

<7> [447.591468] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [447.591561] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [447.591653] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [447.591734] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)

<7> [447.591812] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)

<7> [447.591889] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)

<7> [447.591967] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [447.592043] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [447.592120] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [447.592194] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in dpll_hw_state

<7> [447.592267] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:

<7> [447.592340] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [447.592440] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state:

<7> [447.592535] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000

<7> [447.592639] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [447.592737] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000

<7> [447.592820] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000

<7> [447.592899] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000

<7> [447.592970] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000

<7> [447.593041] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000

<7> [447.593112] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000

<7> [447.593182] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000

<7> [447.593254] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000

<7> [447.593325] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000

<7> [447.593432] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000

<7> [447.593525] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000

<7> [447.593617] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [447.593703] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:

<7> [447.593778] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [447.593850] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: no,

<7> [447.593923] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.

<7> [447.593994] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:

<7> [447.594066] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21

<7> [447.594138] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [447.594210] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [447.594283] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [447.594358] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [447.594474] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [447.594571] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [447.594667] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)

<7> [447.594742] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)

<7> [447.594816] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in port_clock (expected 0, found 432000)

<7> [447.594889] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] fastset requirement not met, forcing full modeset

<7> [447.594963] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0

<7> [447.595073] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x2

<7> [447.595133] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:270:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x1 -> 0x2

<7> [447.595196] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0

<7> [447.595255] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [447.595312] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:264:cursor B] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45

<7> [447.595375] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [447.595407] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [447.595450] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [447.595526] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54

<7> [447.595567] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [447.595608] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55

<7> [447.595692] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [447.595712] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1

<7> [447.595822] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400

<7> [447.595917] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400

<7> [447.596006] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400

<7> [447.596088] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400

<7> [447.596169] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731

<7> [447.596266] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min cdclk: 173855 kHz -> 0 kHz

<7> [447.596347] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:270:pipe B] min cdclk: 0 kHz -> 173855 kHz

<7> [447.596481] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 43464 kHz -> 10866 kHz

<7> [447.596634] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:270:pipe B] allocated DPLL 0

<7> [447.596734] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:270:pipe B] reserving DPLL 0

<7> [447.596819] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: no [modeset]

<7> [447.596901] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [447.596982] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [447.597061] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [447.597141] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [447.597222] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [447.597302] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [447.597389] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: yes [modeset]

<7> [447.597493] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [447.597595] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0

<7> [447.597700] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [447.597789] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [447.597876] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [447.597956] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [447.598032] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64

<7> [447.598108] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [447.598183] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled

<7> [447.598257] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [447.598331] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [447.598422] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0

<7> [447.598530] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [447.598642] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [447.598741] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [447.598821] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [447.598896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [447.598969] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [447.599043] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [447.599116] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [447.599189] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [447.599263] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97

<7> [447.599338] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906

<7> [447.599429] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [447.599534] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [447.599633] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [447.599722] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [447.599799] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [447.599874] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [447.599949] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 173855, min voltage level 0

<7> [447.600024] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0

<7> [447.600098] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [447.600173] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0

<7> [447.600248] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [447.600322] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [447.600409] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [447.600515] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [447.600626] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no,

<7> [447.600719] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.

<7> [447.600804] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [447.600876] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [447.600948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [447.601021] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [447.601093] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [447.601165] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [447.601237] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [447.601310] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [447.601388] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [447.601492] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [447.601600] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [447.601701] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [447.601776] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [447.601852] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [447.601934] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [447.602015] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [447.602086] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [447.602157] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [447.602227] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [447.602298] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:154:plane 1B] fb: [FB:432] 2880x1800 format = RG16 little-endian (0x36314752) modifier = 0x0, visible: yes

<7> [447.602375] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [447.602465] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0

<7> [447.602559] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:184:plane 2B] fb: [NOFB], visible: no

<7> [447.602652] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:214:plane 3B] fb: [NOFB], visible: no

<7> [447.602730] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:244:plane 4B] fb: [NOFB], visible: no

<7> [447.602804] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:254:plane 5B] fb: [NOFB], visible: no

<7> [447.602880] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:264:cursor B] fb: [NOFB], visible: no

<7> [447.603702] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [447.603800] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [447.603941] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [447.604075] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [447.604214] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000)

<7> [447.604392] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [447.604498] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [447.812580] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0

<7> [447.813189] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [447.828736] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off

<7> [447.829086] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [447.829508] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [447.829868] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short

<7> [447.830320] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [447.881421] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [447.881842] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short

<7> [447.888612] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [447.888983] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]

<7> [447.889042] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]

<7> [447.889788] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]

<7> [447.890534] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [447.891084] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [447.891625] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A]

<7> [447.891965] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1]

<7> [447.892266] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A]

<7> [447.892657] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B]

<7> [447.893003] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C]

<7> [447.893330] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2]

<7> [447.893696] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A]

<7> [447.894002] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B]

<7> [447.894304] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C]

<7> [447.894656] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3]

<7> [447.895026] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A]

<7> [447.895386] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B]

<7> [447.895718] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C]

<7> [447.896056] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:402:DP-1]

<7> [447.896384] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:414:DP-2]

<7> [447.896682] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:422:DP-3]

<7> [447.897055] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)

<7> [447.897447] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [447.899256] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:270:pipe B]

<7> [447.899790] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [447.902223] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on

<7> [447.902601] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (487 ms remaining)

<7> [447.918889] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [447.919297] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long

<7> [447.919684] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [447.920102] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]

<7> [448.396620] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [448.427368] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [448.427825] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on

<7> [448.428271] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063

<7> [448.464679] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [448.465154] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long

<7> [448.465629] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20

<7> [448.466397] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]

<7> [448.637278] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [448.637756] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on

<7> [448.638065] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b

<7> [448.640119] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [448.641680] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [448.642531] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05

<7> [448.643730] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [448.645167] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [448.646351] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK

<7> [448.646784] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4

<7> [448.648286] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [448.648752] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4

<7> [448.649575] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe B

<7> [448.650100] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [448.650471] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe B

<7> [448.650907] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 4518

<7> [448.666992] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A

<7> [448.667497] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000)

<7> [448.667978] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]

<7> [448.668351] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [448.669945] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]

<7> [448.670346] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:270:pipe B]

<7> [448.674191] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe B

<7> [448.674637] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [448.674744] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [448.674884] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [448.675191] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [448.675523] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.675805] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.676076] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.676377] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [448.676735] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [448.677075] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [448.677413] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [448.677720] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [448.678060] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [448.678870] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [448.684888] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [448.685140] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [448.685424] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [448.685638] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [448.685838] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [448.686049] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [448.686259] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [448.686546] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [448.686796] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [448.687040] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [448.687279] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [448.687606] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [448.687920] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 10866 kHz -> 21732 kHz

<7> [448.700178] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [448.701915] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [448.701988] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:434] is removed

<7> [448.702067] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [448.702437] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [448.702710] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.702974] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.703258] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.703572] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [448.703893] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [448.704209] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [448.704529] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [448.704814] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [448.705097] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [448.705723] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [448.718162] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [448.718693] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [448.719102] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [448.719493] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [448.719790] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [448.720115] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [448.720450] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [448.720821] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [448.721175] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [448.721533] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [448.721853] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [448.722150] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [448.733526] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [448.735301] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [448.735419] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [448.735521] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [448.735859] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [448.736148] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.736484] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.736745] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.737091] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [448.737571] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [448.737918] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [448.738256] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [448.738674] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [448.738997] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [448.739662] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [448.752265] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [448.752582] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [448.752888] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [448.753158] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [448.753477] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 46, 599, 599, 599, 599, 599, 0, 0, 60, 139, 153

<7> [448.753769] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 52, 660, 660, 660, 660, 660, 0, 0, 61, 154, 154

<7> [448.754093] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2781680 num active planes 1

<7> [448.754489] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400

<7> [448.754834] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400

<7> [448.755166] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400

<7> [448.755503] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400

<7> [448.755852] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921

<7> [448.756210] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 21732 kHz -> 43464 kHz

<7> [448.766852] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [448.768619] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [448.768721] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:434] is removed

<7> [448.768826] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [448.769145] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [448.769443] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.769687] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 46, 599, 599, 599, 599, 599, 0, 0, 60, 139, 153 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.769974] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 52, 660, 660, 660, 660, 660, 0, 0, 61, 154, 154 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.770261] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [448.770681] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [448.770999] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [448.771293] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [448.771643] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [448.771913] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [448.772571] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [448.791413] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [448.791634] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [448.791866] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [448.792086] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [448.792294] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54

<7> [448.792593] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55

<7> [448.792834] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1

<7> [448.793161] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400

<7> [448.793521] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400

<7> [448.793816] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400

<7> [448.794104] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400

<7> [448.794389] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731

<7> [448.800175] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [448.801842] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [448.801913] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [448.801985] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [448.802250] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [448.802669] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.802984] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.803234] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.803487] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [448.803754] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [448.804012] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [448.804259] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [448.804558] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [448.804784] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [448.805313] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [448.823966] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [448.824244] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B]

<7> [448.824720] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1385), size 0 -> 1385

<7> [448.825076] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1385 - 4051), size 0 -> 2666

<7> [448.825362] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [448.825647] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [448.825886] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 92, 92, 92, 92, 92, 0, 0, 25, 22, 36

<7> [448.826114] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 103, 103, 103, 103, 103, 0, 0, 26, 26, 37

<7> [448.826376] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [448.826605] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [448.826815] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 92, 92, 92, 92, 92, 0, 0, 21, 22, 36

<7> [448.827012] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 103, 103, 103, 103, 103, 0, 0, 22, 26, 37

<7> [448.827226] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1043130 num active planes 2

<7> [448.827529] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1096 qgv_peak_bw: 38400

<7> [448.827805] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1096 qgv_peak_bw: 38400

<7> [448.828060] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1096 qgv_peak_bw: 38400

<7> [448.828330] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1096 qgv_peak_bw: 38400

<7> [448.828607] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1096

<7> [448.833450] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [448.834744] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [448.834787] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [448.834837] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 1385) -> ( 0 - 0), size 1385 -> 0

<7> [448.834972] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1385 - 4051) -> ( 0 - 0), size 2666 -> 0

<7> [448.835096] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [448.835386] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.835645] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 11, 92, 92, 92, 92, 92, 0, 0, 25, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.835948] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 14, 103, 103, 103, 103, 103, 0, 0, 26, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.836165] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [448.836268] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.836416] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 7, 92, 92, 92, 92, 92, 0, 0, 21, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.836518] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 9, 103, 103, 103, 103, 103, 0, 0, 22, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.836630] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [448.836788] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [448.836939] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [448.837089] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [448.837232] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [448.837387] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [448.837743] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [448.861874] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [448.862082] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:154:plane 1B] using Y plane [PLANE:244:plane 4B]

<7> [448.862403] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 1413), size 0 -> 1413

<7> [448.862664] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1413 - 4051), size 0 -> 2638

<7> [448.862858] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [448.863033] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [448.863204] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 170, 170, 170, 170, 170, 0, 0, 33, 40, 54

<7> [448.863438] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 188, 188, 188, 188, 188, 0, 0, 34, 45, 55

<7> [448.863600] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [448.863748] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [448.863890] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54

<7> [448.864026] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55

<7> [448.864184] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2086260 num active planes 2

<7> [448.864416] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400

<7> [448.864621] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400

<7> [448.864812] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400

<7> [448.865034] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400

<7> [448.865228] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191

<7> [448.867376] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [448.867938] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [448.868108] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [448.868421] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [448.868566] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [448.883492] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [448.885059] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [448.885119] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [448.885206] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 1413) -> ( 0 - 0), size 1413 -> 0

<7> [448.885631] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1413 - 4051) -> ( 0 - 0), size 2638 -> 0

<7> [448.885944] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [448.886196] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.886407] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 19, 170, 170, 170, 170, 170, 0, 0, 33, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.886575] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 22, 188, 188, 188, 188, 188, 0, 0, 34, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.886762] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [448.886934] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.887096] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.887269] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.887475] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [448.887692] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [448.887896] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [448.888099] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [448.888293] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [448.888516] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [448.888985] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [448.913748] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [448.913991] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [448.914233] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [448.914479] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [448.914657] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [448.914854] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [448.915051] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [448.915410] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [448.915561] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [448.915703] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [448.915839] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [448.915969] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [448.916105] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [448.916311] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [448.916503] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [448.916689] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [448.916866] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [448.917072] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [448.917360] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [448.917831] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [448.918008] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [448.919432] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [448.919579] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [448.933498] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [448.935222] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [448.935345] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [448.935448] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [448.935783] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [448.936085] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.936392] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.936629] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.936908] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [448.937224] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [448.937547] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [448.937832] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [448.938099] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [448.938378] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [448.938978] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [448.965179] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [448.965410] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [448.965624] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [448.965789] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [448.965945] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [448.966095] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [448.966264] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [448.966540] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [448.966727] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [448.966903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [448.967079] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [448.967246] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [448.968333] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [448.968704] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [448.968889] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [448.969537] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [448.969680] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [448.983480] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [448.985120] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [448.985206] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [448.985330] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [448.985642] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [448.985921] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.986177] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.986416] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [448.986620] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [448.986885] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [448.987143] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [448.987436] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [448.987674] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [448.987894] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [448.988420] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.015669] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [449.015875] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.016109] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.016313] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.016487] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [449.016674] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [449.016878] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [449.017112] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [449.017336] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [449.017358] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [449.017535] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [449.017612] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [449.017725] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [449.017812] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [449.017919] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [449.020121] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [449.020276] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [449.033457] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.035248] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [449.035361] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [449.035482] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [449.035819] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.036122] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.036460] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.036703] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.036975] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.037320] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.037621] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.037909] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.038191] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.038481] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.039115] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.067356] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [449.067612] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [449.067794] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [449.072578] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [449.072669] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.072755] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.072833] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.072906] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 46, 599, 599, 599, 599, 599, 0, 0, 60, 139, 153

<7> [449.072968] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 52, 660, 660, 660, 660, 660, 0, 0, 61, 154, 154

<7> [449.073039] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2781680 num active planes 1

<7> [449.073141] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400

<7> [449.073239] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400

<7> [449.073341] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400

<7> [449.073437] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400

<7> [449.073530] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921

<7> [449.076329] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [449.076439] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [449.083424] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.084767] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [449.084830] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed

<7> [449.084896] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [449.085109] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.085309] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.085495] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 46, 599, 599, 599, 599, 599, 0, 0, 60, 139, 153 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.085680] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 52, 660, 660, 660, 660, 660, 0, 0, 61, 154, 154 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.085865] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.086097] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.086201] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.086313] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.086412] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.086509] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.086752] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.101365] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [449.101570] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.101776] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.101946] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.102115] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54

<7> [449.102271] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55

<7> [449.102482] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1

<7> [449.102698] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400

<7> [449.102900] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400

<7> [449.103094] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400

<7> [449.103290] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400

<7> [449.103470] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731

<7> [449.116815] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.118429] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [449.118520] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:434] is removed

<7> [449.118619] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [449.118926] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.119172] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.119393] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.119560] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.119786] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.120064] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.120387] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.120654] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.120919] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.121234] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.121981] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.134749] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [449.135122] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.135547] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.135934] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.136215] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [449.136564] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [449.136862] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [449.137251] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [449.137691] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [449.138063] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [449.138456] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [449.138840] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [449.150137] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.151840] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [449.151924] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [449.152013] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [449.152353] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.152632] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.152923] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.153187] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.153500] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.153878] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.154213] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.154589] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.154882] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.155163] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.155878] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.168074] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [449.168396] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.168736] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.169036] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.169345] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [449.169659] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [449.169969] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [449.170353] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [449.170678] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [449.170992] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [449.171357] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [449.171649] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [449.183430] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.185189] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [449.185300] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:434] is removed

<7> [449.185397] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [449.185706] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.185984] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.186275] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.186635] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.186929] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.187306] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.187626] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.187929] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.188213] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.188519] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.189163] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.202541] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [449.202879] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.203317] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.203698] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.204025] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 46, 599, 599, 599, 599, 599, 0, 0, 60, 139, 153

<7> [449.204342] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 52, 660, 660, 660, 660, 660, 0, 0, 61, 154, 154

<7> [449.204646] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2781680 num active planes 1

<7> [449.205032] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400

<7> [449.205427] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400

<7> [449.205817] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400

<7> [449.206148] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400

<7> [449.206526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921

<7> [449.216815] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.218601] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [449.218687] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [449.218778] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [449.219088] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.219404] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.219697] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 46, 599, 599, 599, 599, 599, 0, 0, 60, 139, 153 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.219964] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 52, 660, 660, 660, 660, 660, 0, 0, 61, 154, 154 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.220231] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.220652] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.220973] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.221300] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.221587] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.221871] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.222594] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.241198] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [449.241443] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.241660] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.241855] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.242042] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54

<7> [449.242251] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55

<7> [449.242529] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1

<7> [449.242929] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.243118] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.243320] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.243542] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54

<7> [449.243728] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55

<7> [449.243921] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1

<7> [449.244209] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400

<7> [449.244547] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400

<7> [449.244863] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400

<7> [449.245126] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400

<7> [449.245394] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731

<7> [449.250089] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.251692] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [449.251776] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [449.251869] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [449.252170] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.252440] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.252648] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.252871] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.253076] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.253286] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.253465] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.253631] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.253796] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.253954] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.254374] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.274557] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [449.274817] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B]

<7> [449.275233] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1385), size 0 -> 1385

<7> [449.275604] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1385 - 4051), size 0 -> 2666

<7> [449.275861] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.276132] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.276433] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 92, 92, 92, 92, 92, 0, 0, 25, 22, 36

<7> [449.276681] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 103, 103, 103, 103, 103, 0, 0, 26, 26, 37

<7> [449.276891] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.277096] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.277301] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 92, 92, 92, 92, 92, 0, 0, 21, 22, 36

<7> [449.277487] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 103, 103, 103, 103, 103, 0, 0, 22, 26, 37

<7> [449.277702] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1043130 num active planes 2

<7> [449.278069] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B]

<7> [449.278296] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1385), size 0 -> 1385

<7> [449.278458] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1385 - 4051), size 0 -> 2666

<7> [449.278617] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.278772] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.278920] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 92, 92, 92, 92, 92, 0, 0, 25, 22, 36

<7> [449.279069] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 103, 103, 103, 103, 103, 0, 0, 26, 26, 37

<7> [449.279219] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.279397] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.279537] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 92, 92, 92, 92, 92, 0, 0, 21, 22, 36

<7> [449.279672] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 103, 103, 103, 103, 103, 0, 0, 22, 26, 37

<7> [449.279809] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1043130 num active planes 2

<7> [449.280084] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B]

<7> [449.280241] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1385), size 0 -> 1385

<7> [449.280404] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1385 - 4051), size 0 -> 2666

<7> [449.280521] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.280632] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.280743] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 92, 92, 92, 92, 92, 0, 0, 25, 22, 36

<7> [449.280852] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 103, 103, 103, 103, 103, 0, 0, 26, 26, 37

<7> [449.280957] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.281064] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.281172] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 92, 92, 92, 92, 92, 0, 0, 21, 22, 36

<7> [449.281287] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 103, 103, 103, 103, 103, 0, 0, 22, 26, 37

<7> [449.281397] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1043130 num active planes 2

<7> [449.281570] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1096 qgv_peak_bw: 38400

<7> [449.281734] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1096 qgv_peak_bw: 38400

<7> [449.281891] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1096 qgv_peak_bw: 38400

<7> [449.282043] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1096 qgv_peak_bw: 38400

<7> [449.282209] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1096

<7> [449.300075] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.301575] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [449.301662] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [449.301760] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 1385) -> ( 0 - 0), size 1385 -> 0

<7> [449.302058] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1385 - 4051) -> ( 0 - 0), size 2666 -> 0

<7> [449.302222] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.302398] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.302539] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 11, 92, 92, 92, 92, 92, 0, 0, 25, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.302693] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 14, 103, 103, 103, 103, 103, 0, 0, 26, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.302848] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.302981] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.303107] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 7, 92, 92, 92, 92, 92, 0, 0, 21, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.303224] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 9, 103, 103, 103, 103, 103, 0, 0, 22, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.303386] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.303603] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.303799] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.303971] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.304141] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.304312] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.304722] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.329086] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [449.329356] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:184:plane 2B] using Y plane [PLANE:244:plane 4B]

<7> [449.329707] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 1413), size 0 -> 1413

<7> [449.330020] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1413 - 4051), size 0 -> 2638

<7> [449.330248] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.330514] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.330726] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 170, 170, 170, 170, 170, 0, 0, 33, 40, 54

<7> [449.330955] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 188, 188, 188, 188, 188, 0, 0, 34, 45, 55

<7> [449.331151] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.331363] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.331535] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54

<7> [449.331697] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55

<7> [449.331887] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2086260 num active planes 2

<7> [449.332147] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400

<7> [449.332414] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400

<7> [449.332644] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400

<7> [449.332869] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400

<7> [449.333094] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191

<7> [449.334327] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [449.334800] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [449.335010] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [449.336371] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [449.336526] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [449.350110] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.351798] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [449.351868] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [449.351951] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 1413) -> ( 0 - 0), size 1413 -> 0

<7> [449.352193] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1413 - 4051) -> ( 0 - 0), size 2638 -> 0

<7> [449.352544] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.352813] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.353070] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 19, 170, 170, 170, 170, 170, 0, 0, 33, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.353267] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 22, 188, 188, 188, 188, 188, 0, 0, 34, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.353508] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.353674] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.353868] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.354045] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.354237] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.354513] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.354753] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.354976] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.355234] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.355479] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.355992] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.380380] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [449.380586] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.380808] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.380994] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.381170] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [449.381388] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [449.381575] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [449.381844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [449.382065] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [449.382276] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [449.382474] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [449.382660] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [449.384426] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [449.384723] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [449.384928] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [449.385090] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [449.385234] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [449.400096] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.401956] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [449.402046] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [449.402142] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [449.402507] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.402790] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.403057] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.403401] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.403677] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.404028] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.404379] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.404695] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.405001] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.405350] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.406018] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.432007] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [449.432204] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.432471] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.432650] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.432813] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [449.432987] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [449.433161] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [449.433400] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [449.433598] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [449.433791] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [449.433972] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [449.434160] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [449.435333] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [449.435779] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [449.435964] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [449.436522] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [449.436678] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [449.450078] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.451894] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [449.451968] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [449.452045] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [449.452379] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.452660] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.452928] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.453211] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.453482] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.453770] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.454047] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.454342] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.454583] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.454816] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.455406] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.481453] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [449.481651] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.481872] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.482059] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.482230] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [449.482434] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [449.482614] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [449.482870] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [449.483079] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [449.483278] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [449.483465] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [449.483643] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [449.484345] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [449.484786] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [449.484980] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [449.486029] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [449.486164] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [449.500070] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.501789] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [449.501867] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [449.501947] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [449.502235] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.502609] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.502885] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.503171] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.503450] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.503735] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.504009] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.504310] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.504558] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.504795] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.505335] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.534315] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [449.534593] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [449.534783] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [449.539492] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [449.539591] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.539693] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.539764] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.539831] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 46, 599, 599, 599, 599, 599, 0, 0, 60, 139, 153

<7> [449.539897] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 52, 660, 660, 660, 660, 660, 0, 0, 61, 154, 154

<7> [449.539971] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2781680 num active planes 1

<7> [449.540063] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400

<7> [449.540153] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400

<7> [449.540240] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400

<7> [449.540347] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400

<7> [449.540441] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921

<7> [449.543258] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [449.543383] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [449.550035] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.551328] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [449.551426] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:184:plane 2B] because [FB:432] is removed

<7> [449.551519] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:184:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [449.551847] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.552101] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.552203] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] blocks 46, 599, 599, 599, 599, 599, 0, 0, 60, 139, 153 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.552300] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:184:plane 2B] min_ddb 52, 660, 660, 660, 660, 660, 0, 0, 61, 154, 154 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.552383] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.552496] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.552608] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.552715] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.552806] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.552895] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.553121] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.567787] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [449.568008] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.568381] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.568734] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.568892] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54

<7> [449.569042] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55

<7> [449.569233] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1

<7> [449.569483] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400

<7> [449.569685] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400

<7> [449.569877] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400

<7> [449.570098] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400

<7> [449.570305] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731

<7> [449.583416] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.585039] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [449.585103] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:434] is removed

<7> [449.585189] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [449.585597] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.585876] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.586151] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.586403] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.586639] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.586959] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.587278] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.587592] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.587947] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.588334] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.589101] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.601353] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [449.601646] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.601995] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.602377] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.602687] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [449.603030] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [449.603356] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [449.603887] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.604187] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.604500] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.604756] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [449.604997] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [449.605248] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [449.605666] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [449.606024] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [449.606365] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [449.606671] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [449.606967] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [449.616694] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.618220] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [449.618331] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [449.618430] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [449.618739] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.619013] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.619218] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.619421] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.619602] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.619868] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.620086] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.620303] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.620500] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.620689] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.621147] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.634664] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [449.635232] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.635642] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.635976] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.636284] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [449.636559] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [449.636918] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [449.637311] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [449.637660] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [449.637991] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [449.638326] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [449.638633] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [449.650042] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.651831] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [449.651921] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:434] is removed

<7> [449.652017] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [449.652378] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.652659] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.652927] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.653230] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.653564] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.653917] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.654252] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.654621] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.654926] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.655217] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.655962] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.668653] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [449.668926] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.669215] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.669549] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.669807] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 46, 599, 599, 599, 599, 599, 0, 0, 60, 139, 153

<7> [449.670073] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 52, 660, 660, 660, 660, 660, 0, 0, 61, 154, 154

<7> [449.670395] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2781680 num active planes 1

<7> [449.670804] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400

<7> [449.671172] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400

<7> [449.671564] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400

<7> [449.671926] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400

<7> [449.672338] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921

<7> [449.683411] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.685139] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [449.685223] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [449.685332] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [449.685614] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.685870] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.686116] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 46, 599, 599, 599, 599, 599, 0, 0, 60, 139, 153 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.686445] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 52, 660, 660, 660, 660, 660, 0, 0, 61, 154, 154 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.686704] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.687029] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.687356] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.687651] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.687935] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.688209] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.688886] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.707620] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [449.707809] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.708033] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.708236] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.708497] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54

<7> [449.708693] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55

<7> [449.708941] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1

<7> [449.709224] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400

<7> [449.709510] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400

<7> [449.709759] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400

<7> [449.710004] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400

<7> [449.710283] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731

<7> [449.716682] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.718468] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [449.718562] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [449.718665] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [449.718974] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.719213] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.719484] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.719664] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.719902] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.720179] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.720449] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.720686] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.720910] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.721132] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.721740] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.740130] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [449.740379] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B]

<7> [449.740673] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1385), size 0 -> 1385

<7> [449.740875] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1385 - 4051), size 0 -> 2666

<7> [449.741070] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.741275] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.741449] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 92, 92, 92, 92, 92, 0, 0, 25, 22, 36

<7> [449.741612] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 103, 103, 103, 103, 103, 0, 0, 26, 26, 37

<7> [449.741796] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.741969] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.742145] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 92, 92, 92, 92, 92, 0, 0, 21, 22, 36

<7> [449.742338] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 103, 103, 103, 103, 103, 0, 0, 22, 26, 37

<7> [449.742506] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1043130 num active planes 2

<7> [449.742755] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1096 qgv_peak_bw: 38400

<7> [449.742957] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1096 qgv_peak_bw: 38400

<7> [449.743144] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1096 qgv_peak_bw: 38400

<7> [449.743342] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1096 qgv_peak_bw: 38400

<7> [449.743543] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1096

<7> [449.750021] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.751676] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [449.751770] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [449.751894] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 1385) -> ( 0 - 0), size 1385 -> 0

<7> [449.752195] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1385 - 4051) -> ( 0 - 0), size 2666 -> 0

<7> [449.752391] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.752524] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.752652] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 11, 92, 92, 92, 92, 92, 0, 0, 25, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.752789] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 14, 103, 103, 103, 103, 103, 0, 0, 26, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.752927] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.753049] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.753158] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 7, 92, 92, 92, 92, 92, 0, 0, 21, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.753282] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 9, 103, 103, 103, 103, 103, 0, 0, 22, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.753408] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.753574] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.753736] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.753890] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.754042] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.754215] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.754641] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.776055] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [449.776278] xe 0000:00:02.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:214:plane 3B] using Y plane [PLANE:244:plane 4B]

<7> [449.776507] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 1413), size 0 -> 1413

<7> [449.776663] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> (1413 - 4051), size 0 -> 2638

<7> [449.776808] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.776947] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.777085] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 170, 170, 170, 170, 170, 0, 0, 33, 40, 54

<7> [449.777218] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 188, 188, 188, 188, 188, 0, 0, 34, 45, 55

<7> [449.777398] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.777522] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.777641] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54

<7> [449.777752] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55

<7> [449.777882] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2086260 num active planes 2

<7> [449.778047] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2191 qgv_peak_bw: 38400

<7> [449.778222] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2191 qgv_peak_bw: 38400

<7> [449.778408] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2191 qgv_peak_bw: 38400

<7> [449.778553] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2191 qgv_peak_bw: 38400

<7> [449.778692] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2191

<7> [449.783438] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.784691] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [449.784731] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [449.784776] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 1413) -> ( 0 - 0), size 1413 -> 0

<7> [449.784865] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb (1413 - 4051) -> ( 0 - 0), size 2638 -> 0

<7> [449.784942] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.785008] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 2, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.785072] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 19, 170, 170, 170, 170, 170, 0, 0, 33, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.785148] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 22, 188, 188, 188, 188, 188, 0, 0, 34, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.785325] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.785474] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.785598] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.785718] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.785862] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.786058] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.786166] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.786269] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.786381] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.786491] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.786755] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.810152] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [449.810378] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.810578] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.810732] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.810877] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [449.811018] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [449.811178] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [449.811427] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [449.811610] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [449.811783] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [449.811947] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [449.812107] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [449.816736] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.818024] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [449.818063] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [449.818112] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [449.818399] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.818677] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.818973] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.819180] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.819300] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.819429] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.819552] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.819668] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.819780] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.819889] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.820184] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.844307] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [449.844493] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.844669] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.844804] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.844930] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [449.845053] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [449.845196] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [449.845417] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [449.845591] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [449.845742] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [449.845884] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [449.846023] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [449.850059] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.851522] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [449.851616] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [449.851715] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [449.852018] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.852164] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.852240] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.852348] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.852440] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.852572] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.852693] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.852803] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.852899] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.852994] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.853265] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.876450] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [449.876669] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.876908] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.877056] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.877202] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [449.877425] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [449.877595] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [449.877876] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.878018] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.878148] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.878287] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [449.878406] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [449.878532] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [449.878709] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [449.878856] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [449.878999] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [449.879139] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [449.879307] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [449.883391] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.884697] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [449.884746] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [449.884802] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [449.884957] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.885075] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.885202] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.885406] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.885572] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.885783] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.885987] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.886160] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.886279] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.886390] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.886690] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.916207] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [449.916317] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.916426] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.916516] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.916602] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 46, 599, 599, 599, 599, 599, 0, 0, 60, 139, 153

<7> [449.916684] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 52, 660, 660, 660, 660, 660, 0, 0, 61, 154, 154

<7> [449.916767] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 2781680 num active planes 1

<7> [449.916880] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400

<7> [449.916992] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400

<7> [449.917090] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400

<7> [449.917175] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400

<7> [449.917266] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921

<7> [449.918284] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [449.918614] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [449.918761] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [449.920194] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [449.920471] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [449.933460] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.934987] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [449.935032] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:214:plane 3B] because [FB:433] is removed

<7> [449.935083] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:214:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [449.935216] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.935555] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.935873] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] blocks 46, 599, 599, 599, 599, 599, 0, 0, 60, 139, 153 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.936153] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:214:plane 3B] min_ddb 52, 660, 660, 660, 660, 660, 0, 0, 61, 154, 154 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.936287] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.936441] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.936588] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.936727] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.936864] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.936997] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.937370] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.951047] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [449.951337] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.951588] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.951806] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.952005] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54

<7> [449.952232] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55

<7> [449.952567] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1

<7> [449.952862] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400

<7> [449.953102] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400

<7> [449.953355] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400

<7> [449.953588] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400

<7> [449.953806] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731

<7> [449.966663] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [449.968433] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [449.968532] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:434] is removed

<7> [449.968641] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [449.968981] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [449.969234] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.969512] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.969734] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [449.969999] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [449.970334] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [449.970669] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [449.971014] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.971371] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [449.971711] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [449.972794] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [449.984716] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [449.985104] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [449.985561] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [449.985941] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [449.986221] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [449.986610] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [449.986906] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [449.987280] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [449.987608] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [449.987921] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [449.988281] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [449.988566] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [450.000012] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [450.001748] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [450.001838] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [450.001950] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [450.002292] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [450.002605] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.002920] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.003191] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.003440] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [450.003703] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [450.003945] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [450.004181] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.004488] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.004703] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [450.005256] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [450.017872] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [450.018122] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [450.018440] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [450.018679] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [450.018901] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [450.019153] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [450.019427] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [450.019745] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [450.020006] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [450.020279] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [450.020517] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [450.020753] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [450.033324] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [450.034987] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [450.035060] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:434] is removed

<7> [450.035136] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [450.035506] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [450.035815] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.036102] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.036361] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.036567] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [450.036820] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [450.037061] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [450.037302] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.037524] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.037769] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [450.038271] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [450.058767] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [450.059051] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [450.059397] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [450.059652] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [450.059896] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54

<7> [450.060131] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55

<7> [450.060449] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1

<7> [450.060755] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400

<7> [450.061036] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400

<7> [450.061325] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400

<7> [450.061584] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400

<7> [450.061881] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731

<7> [450.066619] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [450.068122] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [450.068183] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [450.068358] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [450.068663] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [450.068944] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.069191] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.069384] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.069559] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [450.069771] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [450.069978] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [450.070175] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.070397] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.070574] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [450.070991] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [450.098006] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [450.098208] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [450.098437] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [450.098595] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [450.098741] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [450.098882] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [450.099036] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [450.099267] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [450.099446] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [450.099618] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [450.099784] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [450.099942] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [450.101392] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [450.101802] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [450.101955] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [450.102199] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [450.102352] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [450.116612] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [450.118322] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [450.118427] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [450.118533] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [450.118877] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [450.119145] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.119395] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.119588] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.119829] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [450.120105] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [450.120377] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [450.120616] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.120852] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.121075] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [450.121622] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [450.146830] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [450.147079] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [450.147349] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [450.147531] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [450.147700] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [450.147861] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [450.148077] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [450.148336] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [450.148541] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [450.148738] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [450.148924] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [450.149109] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [450.151285] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [450.151463] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [450.151602] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [450.151757] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [450.151890] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [450.166622] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [450.168309] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [450.168407] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [450.168513] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [450.168905] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [450.169168] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.169414] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.169595] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.169797] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [450.170106] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [450.170378] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [450.170615] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.170877] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.171101] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [450.171639] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [450.198243] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [450.198479] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [450.198718] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [450.198900] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [450.199070] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [450.199242] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [450.199422] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [450.199723] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [450.199869] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [450.200001] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [450.200132] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [450.200281] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [450.200413] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [450.200596] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [450.200771] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [450.200940] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [450.201109] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [450.201280] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [450.201353] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [450.201853] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [450.202055] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [450.203619] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [450.203760] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [450.216621] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [450.218448] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [450.218540] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:244:plane 4B] because [FB:433] is removed

<7> [450.218639] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:244:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [450.218956] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [450.219314] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.219532] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.219752] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:244:plane 4B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.219968] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [450.220268] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [450.220534] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [450.220841] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.221094] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.221395] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [450.221942] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [450.234655] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [450.234971] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [450.235544] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [450.235842] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [450.236092] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54

<7> [450.236374] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55

<7> [450.236648] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1

<7> [450.237130] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [450.237410] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [450.237620] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [450.237811] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54

<7> [450.237996] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55

<7> [450.238190] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1

<7> [450.238611] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [450.238791] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [450.238960] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [450.239162] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54

<7> [450.239371] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55

<7> [450.239545] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1

<7> [450.239783] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400

<7> [450.240019] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400

<7> [450.240258] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400

<7> [450.240518] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400

<7> [450.240738] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731

<7> [450.249917] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [450.251171] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [450.251329] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:434] is removed

<7> [450.251429] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [450.251743] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [450.252023] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.252215] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.252325] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.252421] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [450.252559] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [450.252688] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [450.252799] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.252908] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.253015] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [450.253314] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [450.267577] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [450.267782] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [450.267997] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [450.268170] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [450.268393] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [450.268566] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [450.268763] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [450.269033] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [450.269265] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [450.269475] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [450.269676] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [450.269876] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [450.283341] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [450.284924] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [450.284988] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [450.285062] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [450.285371] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [450.285659] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.285933] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.286230] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.286433] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [450.286703] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [450.286941] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [450.287175] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.287436] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.287651] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [450.288156] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [450.301092] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:434]

<7> [450.301478] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [450.301909] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [450.302188] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [450.302440] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [450.302637] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [450.302891] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [450.303185] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [450.303497] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [450.303763] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [450.304012] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [450.304314] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [450.316573] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [450.318134] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:434] from all active usage due to RMFB ioctl

<7> [450.318253] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:434] is removed

<7> [450.318340] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [450.318576] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [450.318797] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.319031] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.319229] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.319419] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [450.319674] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [450.319910] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [450.320139] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.320446] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.320667] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [450.321170] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [450.342186] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [450.342546] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [450.342897] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [450.343242] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [450.343504] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54

<7> [450.343801] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55

<7> [450.344081] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 695420 num active planes 1

<7> [450.344455] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 731 qgv_peak_bw: 38400

<7> [450.344768] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 731 qgv_peak_bw: 38400

<7> [450.345063] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 731 qgv_peak_bw: 38400

<7> [450.345371] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 731 qgv_peak_bw: 38400

<7> [450.345639] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 731

<7> [450.349984] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [450.351590] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [450.351682] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [450.351777] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [450.352083] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [450.352262] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.352420] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 13, 170, 170, 170, 170, 170, 0, 0, 27, 40, 54 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.352594] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 16, 188, 188, 188, 188, 188, 0, 0, 28, 45, 55 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.352779] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [450.353023] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [450.353240] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [450.353433] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.353621] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.353834] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [450.354334] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [450.381815] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [450.382043] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [450.382267] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [450.382413] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [450.382554] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [450.382684] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [450.382860] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [450.383070] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [450.383263] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [450.383434] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [450.383599] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [450.383783] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [450.384268] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [450.384655] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [450.384849] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [450.386134] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [450.386277] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [450.399930] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [450.401825] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [450.401923] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [450.402027] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [450.402386] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [450.402667] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.402932] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.403212] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.403513] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [450.403799] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [450.404073] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [450.404358] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.404609] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.404849] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [450.405485] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [450.431639] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [450.431886] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [450.432111] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [450.432316] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [450.432480] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [450.432638] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [450.432811] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [450.433015] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [450.433219] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [450.433406] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [450.433582] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [450.433754] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [450.434260] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [450.434482] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [450.434692] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [450.436723] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [450.436847] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [450.449929] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [450.451798] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [450.451880] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [450.451968] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [450.452343] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [450.452603] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.452844] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.453103] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.453327] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [450.453578] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [450.453812] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [450.454036] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.454295] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.454516] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [450.455063] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [450.481121] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]

<7> [450.481376] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [450.481609] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [450.481782] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [450.481943] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [450.482119] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [450.482358] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1

<7> [450.482600] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [450.482807] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [450.482991] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [450.483202] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [450.483418] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [450.484362] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [450.484751] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [450.484949] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [450.485795] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [450.485941] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [450.499922] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [450.501738] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl

<7> [450.501825] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:254:plane 5B] because [FB:433] is removed

<7> [450.501919] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:254:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [450.502240] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [450.502461] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.502670] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.502885] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:254:plane 5B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [450.503111] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0

<7> [450.503419] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [450.503681] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [450.503977] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.504227] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [450.504458] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [450.504996] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<6> [450.517750] [IGT] kms_plane_scaling: finished subtest pipe-B, SUCCESS

Results for igt@kms_plane_scaling@plane-scaler-unity-scaling-with-pixel-format@pipe-b