Results for igt@kms_force_connector_basic@force-edid

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.4-g7f3362137 (x86_64) (Linux: 7.0.0-rc6-lgci-xe-xe-4851-b5ad18dd8ef3c25a1-debug+ x86_64)
Out 
Using IGT_SRANDOM=1775303402 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.033s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.033s)
Dmesg
<6> [269.324359] Console: switching to colour dummy device 80x25
<6> [269.324545] [IGT] kms_force_connector_basic: executing
<7> [269.328234] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:517:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [269.328241] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [269.328246] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [269.332407] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [269.332459] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [269.332464] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [269.336640] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [269.336688] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [269.336691] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [269.340866] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<6> [269.341089] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [269.341367] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:517:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [269.341372] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [269.341376] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [269.341765] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [269.341852] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [269.342649] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [269.342807] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [269.342822] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [269.342980] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [269.349054] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [269.349063] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [269.349148] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] status updated from disconnected to connected
<7> [269.349184] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] probed modes:
<7> [269.349187] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [269.349190] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [269.349193] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [269.349196] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [269.349198] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [269.349210] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [269.349256] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [269.349284] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [269.349288] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [269.349675] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [269.349764] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [269.350125] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [269.350210] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [269.350217] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [269.350298] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [269.356363] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [269.356370] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [269.356491] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] probed modes:
<7> [269.356494] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [269.356498] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [269.356500] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [269.356503] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [269.356505] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [269.356687] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:517:HDMI-A-1] EDID override set
<7> [269.356702] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [269.356705] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [269.357031] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:517:HDMI-A-1] ELD monitor IGT
<7> [269.357036] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:517:HDMI-A-1] ELD size 24, SAD count 0
<7> [269.357326] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [269.357423] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [269.357786] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [269.357870] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [269.357974] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [269.357982] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [269.357988] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] probed modes:
<7> [269.357990] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [269.357993] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [269.357996] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [269.357999] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [269.358001] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [269.358092] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:517:HDMI-A-1] EDID override reset
<7> [269.358210] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [269.358214] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [269.358599] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [269.358688] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [269.359112] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [269.359202] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [269.359208] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [269.359289] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [269.365353] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [269.365359] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [269.365435] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:517:HDMI-A-1] EDID changed, epoch counter 2
<7> [269.365474] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [269.365481] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [269.365488] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] probed modes:
<7> [269.365491] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [269.365494] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [269.365496] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [269.365499] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [269.365501] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [269.365633] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:517:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [269.365637] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [269.365640] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [269.369789] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] status updated from connected to disconnected
<7> [269.369798] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [269.369820] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [269.369865] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [269.369904] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [269.369909] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [269.374066] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<6> [269.374295] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [269.375576] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [269.375582] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [269.375626] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [269.375631] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1]
<7> [269.376097] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [269.376456] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [269.376604] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [269.376745] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [269.376943] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [269.376951] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [269.376957] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [269.376963] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [269.376987] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [269.377126] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [269.377265] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [269.377711] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [269.377716] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [269.377722] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [269.377728] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [269.377734] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [269.381906] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [269.381915] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1]
<7> [269.381919] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-1]
<7> [269.382093] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1] disconnected
<7> [269.382097] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2]
<7> [269.382100] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:536:DP-2]
<7> [269.403112] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.424081] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.445044] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.466007] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.486970] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.507933] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.528893] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.549850] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.570852] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.591853] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.612851] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.633850] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.654851] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.675851] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.696852] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.717853] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.738862] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.759820] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.780807] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.801792] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.822771] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.843737] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.864697] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.885663] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.906623] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.927581] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.948535] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.969492] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [269.990445] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.011411] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.032368] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.053324] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.053429] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [270.053448] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2] disconnected
<7> [270.053455] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3]
<7> [270.053460] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:545:DP-3]
<7> [270.053611] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3] disconnected
<7> [270.053883] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4]
<7> [270.053887] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:554:DP-4]
<7> [270.054053] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4] disconnected
<7> [270.054058] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] enabled? yes
<7> [270.054064] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:517:HDMI-A-1] enabled? no
<7> [270.054069] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-1] enabled? no
<7> [270.054074] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:536:DP-2] enabled? no
<7> [270.054079] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:545:DP-3] enabled? no
<7> [270.054083] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:554:DP-4] enabled? no
<7> [270.054131] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [270.054154] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] found preferred mode: 3840x2160
<7> [270.054160] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
<7> [270.054184] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 3840x2160 set (0,0)
<7> [270.074140] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [270.074629] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:508:eDP-1] force updated from 0 to 0 or reprobing
<7> [270.074634] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [270.074638] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1]
<7> [270.075125] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [270.075459] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [270.075722] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [270.075918] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [270.076042] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [270.076048] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [270.076052] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [270.076055] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [270.076082] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [270.076174] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [270.076262] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [270.076614] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [270.076618] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [270.076622] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [270.076651] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [270.076654] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1]
<7> [270.077088] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [270.077394] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [270.077604] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [270.077806] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [270.077925] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [270.077929] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [270.077933] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [270.077936] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [270.077948] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [270.078053] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [270.078143] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [270.078489] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [270.078492] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [270.078495] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [270.078586] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:508:eDP-1] EDID override reset
<7> [270.078600] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [270.078603] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1]
<7> [270.079040] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [270.079338] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [270.079483] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [270.079570] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [270.079669] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [270.079673] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [270.079676] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [270.079679] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [270.079689] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [270.079777] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [270.079936] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [270.080289] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [270.080292] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [270.080295] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [270.080426] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:517:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [270.080431] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [270.080435] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [270.084616] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [270.084644] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [270.084649] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [270.088789] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [270.088897] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:517:HDMI-A-1] EDID override reset
<7> [270.088918] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [270.088923] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [270.093084] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [270.093175] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:526:DP-1] EDID override reset
<7> [270.093189] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1]
<7> [270.093193] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-1]
<7> [270.093351] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1] disconnected
<7> [270.093424] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:536:DP-2] EDID override reset
<7> [270.093436] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2]
<7> [270.093439] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:536:DP-2]
<7> [270.114446] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.135412] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.156373] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.177331] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.198285] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.219240] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.240194] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.261154] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.282108] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.303062] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.324016] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.344972] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.365923] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.386875] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.407834] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.428793] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.449776] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.470756] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.491723] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.512683] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.533643] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.554599] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.575555] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.596511] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.617475] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.638435] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.659397] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.680359] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.701317] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.722272] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.743225] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.764182] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [270.764290] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [270.764309] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2] disconnected
<7> [270.764440] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:545:DP-3] EDID override reset
<7> [270.764459] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3]
<7> [270.764463] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:545:DP-3]
<7> [270.764638] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3] disconnected
<7> [270.764713] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:554:DP-4] EDID override reset
<7> [270.764727] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4]
<7> [270.764731] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:554:DP-4]
<7> [270.764884] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4] disconnected
<7> [270.784990] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [270.785271] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [270.802003] Console: switching to colour frame buffer device 240x67
Created at 2026-04-04 11:58:45