Results for igt@kms_force_connector_basic@force-edid

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.4-g574c502c4 (x86_64) (Linux: 7.0.0-rc6-lgci-xe-xe-4846-d74bb859cb37fee16-debug+ x86_64)
Out 
Using IGT_SRANDOM=1775213746 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.028s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.028s)
Dmesg
<6> [238.900834] Console: switching to colour dummy device 80x25
<6> [238.901379] [IGT] kms_force_connector_basic: executing
<7> [238.907779] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:552:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [238.907802] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [238.907817] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [238.912275] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [238.912346] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [238.912357] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [238.916763] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [238.916809] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [238.916818] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [238.921212] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<6> [238.921675] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [238.922375] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:552:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [238.922387] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [238.922396] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [238.922858] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [238.923091] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [238.923464] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [238.923727] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [238.923750] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [238.923983] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [238.926294] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [238.926313] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [238.926564] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] status updated from disconnected to connected
<7> [238.926731] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] probed modes:
<7> [238.926741] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [238.926753] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [238.926762] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [238.926771] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [238.926779] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [238.926841] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [238.926851] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [238.927268] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [238.927519] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [238.927937] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [238.928183] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [238.928200] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [238.928441] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [238.929439] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [238.929621] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [238.931719] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [238.931747] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [238.932263] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] probed modes:
<7> [238.932275] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [238.932286] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [238.932295] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [238.932303] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [238.932311] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [238.932863] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:552:HDMI-A-1] EDID override set
<7> [238.932917] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [238.932928] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [238.933632] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:552:HDMI-A-1] ELD monitor IGT
<7> [238.933646] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:552:HDMI-A-1] ELD size 24, SAD count 0
<7> [238.933831] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [238.934119] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [238.934536] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [238.934835] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [238.935257] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [238.935285] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [238.935304] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] probed modes:
<7> [238.935314] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [238.935324] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [238.935333] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [238.935342] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [238.935351] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [238.935688] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:552:HDMI-A-1] EDID override reset
<7> [238.935936] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [238.935947] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [238.936435] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [238.936733] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [238.937152] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [238.937420] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [238.937441] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [238.937723] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [238.940058] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [238.940077] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [238.940344] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:552:HDMI-A-1] EDID changed, epoch counter 2
<7> [238.940511] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [238.940536] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [238.940558] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] probed modes:
<7> [238.940568] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [238.940592] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [238.940601] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [238.940611] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [238.940620] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [238.941007] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:552:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [238.941022] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [238.941034] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [238.945381] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] status updated from connected to disconnected
<7> [238.945404] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [238.945498] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [238.945508] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [238.946615] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [238.946742] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [238.950123] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<6> [238.950793] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [238.953573] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [238.954724] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [238.963782] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [238.963796] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [238.963913] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1]
<7> [238.963926] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:eDP-1]
<7> [238.964649] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [238.965495] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [238.965903] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [238.966213] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [238.966596] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [238.966613] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [238.966625] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [238.966637] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD monitor
<7> [238.966647] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD size 20, SAD count 0
<7> [238.966692] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] VRR capable: yes
<7> [238.967002] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [238.967329] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [238.968144] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] probed modes:
<7> [238.968157] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [238.968169] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [238.968181] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1]
<7> [238.968194] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:521:DP-1]
<7> [238.968625] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1] disconnected
<7> [238.968641] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]
<7> [238.968654] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:534:DP-2]
<7> [238.969036] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected
<7> [238.969047] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [238.969057] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [238.969461] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [238.969475] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [238.969487] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [238.973898] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [238.973909] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:512:eDP-1] enabled? yes
<7> [238.973919] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:521:DP-1] enabled? no
<7> [238.973927] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no
<7> [238.973935] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no
<7> [238.973942] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:552:HDMI-A-1] enabled? no
<7> [238.973996] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [238.974033] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:512:eDP-1] found preferred mode: 1920x1200
<7> [238.974042] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config
<7> [238.974087] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 1920x1200 set (0,0)
<7> [238.980507] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [238.982115] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:512:eDP-1] force updated from 0 to 0 or reprobing
<7> [238.982128] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1]
<7> [238.982139] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:eDP-1]
<7> [238.982851] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [238.983395] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [238.983818] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [238.984116] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [238.984454] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [238.984468] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [238.984478] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [238.984488] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD monitor
<7> [238.984499] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD size 20, SAD count 0
<7> [238.984533] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] VRR capable: yes
<7> [238.984865] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [238.985183] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [238.986210] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] probed modes:
<7> [238.986231] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [238.986244] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [238.986328] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1]
<7> [238.986340] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:eDP-1]
<7> [238.987165] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [238.987765] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [238.988081] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [238.988377] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [238.988723] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [238.988739] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [238.988749] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [238.988760] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD monitor
<7> [238.988771] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD size 20, SAD count 0
<7> [238.988815] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] VRR capable: yes
<7> [238.989099] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [238.989376] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [238.990143] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] probed modes:
<7> [238.990153] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [238.990164] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [238.990405] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:512:eDP-1] EDID override reset
<7> [238.990447] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1]
<7> [238.990458] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:eDP-1]
<7> [238.991171] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [238.991738] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [238.992044] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [238.992348] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [238.992763] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [238.992776] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [238.992787] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [238.992797] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD monitor
<7> [238.992809] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD size 20, SAD count 0
<7> [238.992847] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] VRR capable: yes
<7> [238.993150] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [238.993449] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [238.994276] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] probed modes:
<7> [238.994288] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [238.994298] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [238.994565] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:521:DP-1] EDID override reset
<7> [238.994623] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1]
<7> [238.994635] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:521:DP-1]
<7> [238.995008] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1] disconnected
<7> [238.995237] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:534:DP-2] EDID override reset
<7> [238.995273] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]
<7> [238.995283] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:534:DP-2]
<7> [238.995652] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected
<7> [238.995875] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:543:DP-3] EDID override reset
<7> [238.995911] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [238.995921] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [238.996268] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [238.996657] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:552:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [238.996671] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [238.996683] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [238.998630] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [238.999081] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [238.999460] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [239.001083] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [239.001156] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [239.001166] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [239.005563] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [239.005769] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:552:HDMI-A-1] EDID override reset
<7> [239.005802] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [239.005811] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [239.010148] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [239.012549] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [239.012933] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [239.013806] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [239.014662] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [239.022327] Console: switching to colour frame buffer device 240x75
Created at 2026-04-03 11:05:13