Results for igt@kms_force_connector_basic@force-edid

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.4-g574c502c4 (x86_64) (Linux: 7.0.0-rc6-lgci-xe-xe-4845-cfd3ea213f786ef8e-debug+ x86_64)
Out 
Using IGT_SRANDOM=1775209551 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.029s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.029s)
Dmesg
<6> [255.883791] Console: switching to colour dummy device 80x25
<6> [255.884359] [IGT] kms_force_connector_basic: executing
<7> [255.889821] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:552:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [255.889850] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [255.889867] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [255.894372] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [255.894444] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [255.894456] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [255.898862] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [255.898905] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [255.898915] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [255.903255] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<6> [255.904425] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [255.905188] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:552:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [255.905204] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [255.905215] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [255.905910] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [255.906182] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [255.906590] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [255.906849] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [255.906874] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [255.907126] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [255.909451] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [255.909471] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [255.909753] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] status updated from disconnected to connected
<7> [255.910074] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] probed modes:
<7> [255.910086] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [255.910098] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [255.910108] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [255.910118] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [255.910127] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [255.910161] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [255.910316] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [255.910391] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [255.910402] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [255.910845] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [255.911098] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [255.911513] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [255.911760] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [255.911778] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [255.912023] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [255.914335] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [255.914354] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [255.914816] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] probed modes:
<7> [255.914827] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [255.914837] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [255.914848] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [255.914856] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [255.914866] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [255.915397] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:552:HDMI-A-1] EDID override set
<7> [255.915450] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [255.915461] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [255.916436] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:552:HDMI-A-1] ELD monitor IGT
<7> [255.916448] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:552:HDMI-A-1] ELD size 24, SAD count 0
<7> [255.916630] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [255.916903] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [255.917318] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [255.917601] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [255.917906] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [255.917936] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [255.917955] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] probed modes:
<7> [255.917964] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [255.917974] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [255.917983] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [255.917992] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [255.918000] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [255.918315] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:552:HDMI-A-1] EDID override reset
<7> [255.918691] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [255.918702] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [255.919202] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [255.919489] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [255.919926] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [255.920199] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [255.920222] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [255.920513] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [255.922855] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [255.922878] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [255.923156] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:552:HDMI-A-1] EDID changed, epoch counter 2
<7> [255.923333] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [255.923366] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [255.923388] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] probed modes:
<7> [255.923400] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [255.923410] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [255.923419] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [255.923429] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [255.923439] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [255.923883] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:552:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [255.923899] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [255.923913] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [255.928310] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] status updated from connected to disconnected
<7> [255.928341] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [255.928423] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [255.928817] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [255.928908] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [255.928922] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [255.933342] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<6> [255.934405] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [255.937564] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [255.938801] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [255.947928] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [255.947943] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [255.948091] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1]
<7> [255.948106] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:eDP-1]
<7> [255.949369] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [255.949983] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [255.950306] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [255.950713] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [255.951112] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [255.951133] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [255.951146] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [255.951161] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD monitor
<7> [255.951175] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD size 20, SAD count 0
<7> [255.951229] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] VRR capable: yes
<7> [255.952778] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [255.953115] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [255.954050] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] probed modes:
<7> [255.954065] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [255.954080] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [255.954093] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1]
<7> [255.954107] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:521:DP-1]
<7> [255.954536] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1] disconnected
<7> [255.954552] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]
<7> [255.954565] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:534:DP-2]
<7> [255.954953] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected
<7> [255.954966] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [255.954978] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [255.955359] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [255.955372] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [255.955384] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [255.959802] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [255.959816] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:512:eDP-1] enabled? yes
<7> [255.959828] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:521:DP-1] enabled? no
<7> [255.959837] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no
<7> [255.959846] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no
<7> [255.959854] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:552:HDMI-A-1] enabled? no
<7> [255.959913] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [255.959957] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:512:eDP-1] found preferred mode: 1920x1200
<7> [255.959968] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config
<7> [255.960007] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 1920x1200 set (0,0)
<7> [255.964625] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [255.966297] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:512:eDP-1] force updated from 0 to 0 or reprobing
<7> [255.966315] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1]
<7> [255.966328] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:eDP-1]
<7> [255.967204] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [255.967812] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [255.968141] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [255.968457] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [255.968839] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [255.968856] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [255.968867] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [255.968878] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD monitor
<7> [255.968890] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD size 20, SAD count 0
<7> [255.968931] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] VRR capable: yes
<7> [255.969238] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [255.969558] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [255.970388] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] probed modes:
<7> [255.970400] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [255.970411] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [255.970482] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1]
<7> [255.970518] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:eDP-1]
<7> [255.971230] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [255.971955] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [255.972234] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [255.972529] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [255.972842] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [255.972853] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [255.972862] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [255.972871] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD monitor
<7> [255.972880] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD size 20, SAD count 0
<7> [255.972912] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] VRR capable: yes
<7> [255.973167] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [255.973419] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [255.974147] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] probed modes:
<7> [255.974157] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [255.974166] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [255.974379] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:512:eDP-1] EDID override reset
<7> [255.974416] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1]
<7> [255.974425] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:512:eDP-1]
<7> [255.975133] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [255.975691] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [255.975976] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [255.976255] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [255.976670] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [255.976682] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [255.976692] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [255.976702] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD monitor
<7> [255.976711] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:512:eDP-1] ELD size 20, SAD count 0
<7> [255.976744] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] VRR capable: yes
<7> [255.977021] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [255.977295] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:512:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [255.978068] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:512:eDP-1] probed modes:
<7> [255.978080] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [255.978090] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [255.978335] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:521:DP-1] EDID override reset
<7> [255.978371] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1]
<7> [255.978382] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:521:DP-1]
<7> [255.978727] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:521:DP-1] disconnected
<7> [255.978950] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:534:DP-2] EDID override reset
<7> [255.978986] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]
<7> [255.978996] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:534:DP-2]
<7> [255.979314] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected
<7> [255.979558] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:543:DP-3] EDID override reset
<7> [255.979595] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]
<7> [255.979605] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:543:DP-3]
<7> [255.979902] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected
<7> [255.980239] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:552:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [255.980251] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [255.980261] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [255.982585] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [255.982944] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [255.983243] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [255.984633] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [255.984686] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [255.984695] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [255.989021] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [255.989244] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:552:HDMI-A-1] EDID override reset
<7> [255.989282] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1]
<7> [255.989292] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:552:HDMI-A-1]
<7> [255.993689] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:HDMI-A-1] disconnected
<7> [255.995645] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [255.995971] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [255.998028] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [255.998948] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [256.006472] Console: switching to colour frame buffer device 240x75
Created at 2026-04-03 10:02:40