Results for igt@kms_force_connector_basic@force-edid

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.4-gb9a380969 (x86_64) (Linux: 7.0.0-rc6-lgci-xe-xe-4842-9056291b324e6e00f-debug+ x86_64)
Out 
Using IGT_SRANDOM=1775139650 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.033s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.033s)
Dmesg
<6> [214.275495] Console: switching to colour dummy device 80x25
<6> [214.275689] [IGT] kms_force_connector_basic: executing
<7> [214.279447] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:517:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [214.279454] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [214.279459] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [214.283646] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [214.283678] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [214.283682] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [214.287864] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [214.287906] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [214.287909] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [214.292150] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<6> [214.292312] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [214.292547] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:517:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [214.292552] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [214.292556] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [214.292938] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [214.293044] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [214.293901] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [214.294072] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [214.294085] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [214.294219] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [214.300416] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [214.300431] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [214.300544] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] status updated from disconnected to connected
<7> [214.300587] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] probed modes:
<7> [214.300590] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [214.300593] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [214.300596] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [214.300599] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [214.300602] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [214.300641] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [214.300645] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [214.301058] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [214.301150] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [214.301510] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [214.301595] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [214.301602] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [214.301684] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [214.301992] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [214.302234] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [214.308017] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [214.308024] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [214.308144] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] probed modes:
<7> [214.308148] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [214.308151] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [214.308153] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [214.308155] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [214.308158] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [214.308327] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:517:HDMI-A-1] EDID override set
<7> [214.308341] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [214.308344] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [214.308534] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:517:HDMI-A-1] ELD monitor IGT
<7> [214.308539] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:517:HDMI-A-1] ELD size 24, SAD count 0
<7> [214.308826] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [214.308913] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [214.309284] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [214.309369] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [214.309450] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [214.309458] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [214.309464] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] probed modes:
<7> [214.309467] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [214.309470] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [214.309473] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [214.309475] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [214.309478] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [214.309561] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:517:HDMI-A-1] EDID override reset
<7> [214.309638] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [214.309641] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [214.310024] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [214.310108] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [214.310465] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [214.310545] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [214.310551] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [214.310632] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [214.316676] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [214.316682] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [214.316761] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:517:HDMI-A-1] EDID changed, epoch counter 2
<7> [214.316798] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [214.316806] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [214.316811] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] probed modes:
<7> [214.316813] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [214.316816] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [214.316819] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [214.316821] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [214.316824] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [214.316956] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:517:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [214.316961] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [214.316965] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [214.321171] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] status updated from connected to disconnected
<7> [214.321178] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [214.321201] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [214.321245] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [214.321269] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [214.321272] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [214.325419] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<6> [214.325619] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [214.332083] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [214.332089] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [214.332141] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [214.332145] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1]
<7> [214.332602] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [214.332959] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [214.333190] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [214.333286] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [214.333396] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [214.333402] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [214.333406] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [214.333409] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [214.333422] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [214.333513] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [214.333605] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [214.333962] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [214.333966] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [214.333974] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [214.333978] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [214.333981] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [214.338146] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [214.338151] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1]
<7> [214.338154] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-1]
<7> [214.338307] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1] disconnected
<7> [214.338310] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2]
<7> [214.338313] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:536:DP-2]
<7> [214.359309] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.380273] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.401233] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.422193] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.443148] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.464104] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.485056] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.506011] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.526972] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.547928] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.568918] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.589912] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.610900] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.631886] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.652865] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.673829] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.694793] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.715755] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.736714] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.757674] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.778630] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.799587] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.820556] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.841531] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.862512] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.883498] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.904477] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.925452] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.946422] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.967383] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [214.988347] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.009314] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.009428] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [215.009449] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2] disconnected
<7> [215.009490] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3]
<7> [215.009497] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:545:DP-3]
<7> [215.009656] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3] disconnected
<7> [215.009660] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4]
<7> [215.009663] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:554:DP-4]
<7> [215.009813] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4] disconnected
<7> [215.009816] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] enabled? yes
<7> [215.009820] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:517:HDMI-A-1] enabled? no
<7> [215.009823] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-1] enabled? no
<7> [215.009825] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:536:DP-2] enabled? no
<7> [215.009827] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:545:DP-3] enabled? no
<7> [215.009829] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:554:DP-4] enabled? no
<7> [215.009856] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [215.009869] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:508:eDP-1] found preferred mode: 3840x2160
<7> [215.009872] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
<7> [215.009887] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 3840x2160 set (0,0)
<7> [215.030064] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [215.030552] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:508:eDP-1] force updated from 0 to 0 or reprobing
<7> [215.030557] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [215.030562] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1]
<7> [215.031015] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [215.031366] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [215.031508] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [215.031650] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [215.031814] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [215.031822] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [215.031827] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [215.031833] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [215.031856] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [215.032012] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [215.032140] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [215.032589] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [215.032594] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [215.032600] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [215.032641] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [215.032647] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1]
<7> [215.033255] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [215.033607] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [215.033776] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [215.033908] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [215.034097] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [215.034103] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [215.034108] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [215.034113] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [215.034131] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [215.034263] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [215.034394] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [215.034826] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [215.034831] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [215.034837] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [215.034980] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:508:eDP-1] EDID override reset
<7> [215.035002] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [215.035007] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:508:eDP-1]
<7> [215.035489] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [215.035833] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [215.036032] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [215.036205] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [215.036359] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [215.036365] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [215.036370] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [215.036375] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [215.036392] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [215.036524] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [215.036655] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [215.037086] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [215.037091] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [215.037096] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [215.037308] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:517:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [215.037314] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [215.037319] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [215.041488] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [215.041533] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [215.041537] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [215.045744] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [215.045843] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:517:HDMI-A-1] EDID override reset
<7> [215.045859] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1]
<7> [215.045862] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:517:HDMI-A-1]
<7> [215.050053] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:HDMI-A-1] disconnected
<7> [215.050145] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:526:DP-1] EDID override reset
<7> [215.050159] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1]
<7> [215.050162] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-1]
<7> [215.050317] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-1] disconnected
<7> [215.050383] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:536:DP-2] EDID override reset
<7> [215.050393] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2]
<7> [215.050396] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:536:DP-2]
<7> [215.071396] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.092357] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.113319] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.134278] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.155234] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.176194] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.197152] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.218106] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.239068] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.260020] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.280977] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.301934] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.322887] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.343883] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.364879] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.385874] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.406868] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.427852] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.448833] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.469806] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.490768] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.511729] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.532690] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.553641] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.574591] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.595543] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.616495] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.637453] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.658408] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.679361] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.700320] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.721305] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [215.721426] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [215.721447] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:536:DP-2] disconnected
<7> [215.721591] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:545:DP-3] EDID override reset
<7> [215.721609] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3]
<7> [215.721613] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:545:DP-3]
<7> [215.721785] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:545:DP-3] disconnected
<7> [215.721863] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:554:DP-4] EDID override reset
<7> [215.721886] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4]
<7> [215.721889] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:554:DP-4]
<7> [215.722044] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:554:DP-4] disconnected
<7> [215.742093] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [215.742266] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [215.758827] Console: switching to colour frame buffer device 240x67
Created at 2026-04-02 14:29:13