<5>[ 0.000000] Linux version 7.0.0-rc5-lgci-xe-xe-4815-f712205aed1e52eda-debug+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04.1) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Sun Mar 29 22:47:55 UTC 2026 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x0000000080800000-0x00000000bfffffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x00000000d0000000-0x00000000fed1ffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x00000000fed80000-0x00000000ff1fffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] System RAM <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x69916018 ESRT=0x68ff8518 MOKvar=0x6ccfb000 <6>[ 0.000000] efi: Remove mem259: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] device reserved <6>[ 0.000000] efi: Remove mem261: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] device reserved <6>[ 0.000000] SMBIOS 3.8 present. <6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D99.2508051732 08/05/2025 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3100.000 MHz processor <6>[ 0.000000] tsc: Detected 3110.400 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] System RAM ==> device reserved <7>[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] System RAM <6>[ 0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000017] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs <6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000385] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000386] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.004891] esrt: Reserving ESRT space from 0x0000000068ff8518 to 0x0000000068ff8668. <7>[ 0.004899] e820: update [mem 0x68ff8000-0x68ff8fff] System RAM ==> device reserved <6>[ 0.004916] Using GB pages for direct mapping <6>[ 0.005625] printk: log buffer data + meta data: 1048576 + 4456448 = 5505024 bytes <6>[ 0.005627] printk: early log buf free: 258480(98%) <6>[ 0.005627] Secure boot disabled <6>[ 0.005629] ACPI: Early table checksum verification disabled <6>[ 0.005631] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.005634] ACPI: XSDT 0x000000006FF70228 000194 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005638] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013) <6>[ 0.005641] ACPI: DSDT 0x000000006FFB6000 02555F (v02 INTEL LNL 00000002 01000013) <6>[ 0.005643] ACPI: FACS 0x000000006FEF1000 000040 <6>[ 0.005644] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005645] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005647] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005648] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005649] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005651] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005652] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005653] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005655] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005656] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005657] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000) <6>[ 0.005659] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005660] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005662] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930) <6>[ 0.005663] ACPI: SSDT 0x000000006FFDD000 009176 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005664] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005666] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930) <6>[ 0.005667] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005668] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005670] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005671] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005672] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013) <6>[ 0.005674] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013) <6>[ 0.005675] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930) <6>[ 0.005676] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005678] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930) <6>[ 0.005679] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930) <6>[ 0.005680] ACPI: LPIT 0x000000006FF85000 0000CC (v01 INTEL LNL 00000002 01000013) <6>[ 0.005681] ACPI: SSDT 0x000000006FF84000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005683] ACPI: SSDT 0x000000006FF83000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005684] ACPI: DBGP 0x000000006FF82000 000034 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005685] ACPI: DBG2 0x000000006FF81000 000054 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005687] ACPI: NHLT 0x000000006FF80000 0002E3 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005688] ACPI: SSDT 0x000000006FF7E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005689] ACPI: SSDT 0x000000006FF77000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005691] ACPI: ECDT 0x000000006FF76000 000069 (v01 LNL 00000002 01000013) <6>[ 0.005693] ACPI: DMAR 0x000000006FF75000 0000D8 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005694] ACPI: FPDT 0x000000006FF74000 000044 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005695] ACPI: SSDT 0x000000006FF73000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930) <6>[ 0.005697] ACPI: SSDT 0x000000006FF71000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005698] ACPI: SSDT 0x000000006FF6D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005699] ACPI: SDEV 0x000000006FFA8000 000046 (v01 00000000 00000000) <6>[ 0.005701] ACPI: SSDT 0x000000006FF62000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930) <6>[ 0.005702] ACPI: PHAT 0x000000006FF61000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D) <6>[ 0.005703] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005704] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113] <6>[ 0.005705] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb55e] <6>[ 0.005706] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f] <6>[ 0.005706] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387] <6>[ 0.005706] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9] <6>[ 0.005706] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa] <6>[ 0.005707] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.005707] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.005707] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.005708] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.005708] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.005708] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.005708] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6] <6>[ 0.005709] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f] <6>[ 0.005709] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1] <6>[ 0.005709] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f] <6>[ 0.005710] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4] <6>[ 0.005710] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6175] <6>[ 0.005710] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df] <6>[ 0.005710] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2] <6>[ 0.005711] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e] <6>[ 0.005711] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955] <6>[ 0.005711] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037] <6>[ 0.005711] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027] <6>[ 0.005712] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7] <6>[ 0.005712] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b] <6>[ 0.005712] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2] <6>[ 0.005713] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320] <6>[ 0.005713] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469] <6>[ 0.005713] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815] <6>[ 0.005714] ACPI: Reserving LPIT table memory at [mem 0x6ff85000-0x6ff850cb] <6>[ 0.005714] ACPI: Reserving SSDT table memory at [mem 0x6ff84000-0x6ff84d5b] <6>[ 0.005714] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff831ef] <6>[ 0.005714] ACPI: Reserving DBGP table memory at [mem 0x6ff82000-0x6ff82033] <6>[ 0.005715] ACPI: Reserving DBG2 table memory at [mem 0x6ff81000-0x6ff81053] <6>[ 0.005715] ACPI: Reserving NHLT table memory at [mem 0x6ff80000-0x6ff802e2] <6>[ 0.005715] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff7f15b] <6>[ 0.005716] ACPI: Reserving SSDT table memory at [mem 0x6ff77000-0x6ff7d53a] <6>[ 0.005716] ACPI: Reserving ECDT table memory at [mem 0x6ff76000-0x6ff76068] <6>[ 0.005716] ACPI: Reserving DMAR table memory at [mem 0x6ff75000-0x6ff750d7] <6>[ 0.005716] ACPI: Reserving FPDT table memory at [mem 0x6ff74000-0x6ff74043] <6>[ 0.005717] ACPI: Reserving SSDT table memory at [mem 0x6ff73000-0x6ff7386c] <6>[ 0.005717] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff723da] <6>[ 0.005717] ACPI: Reserving SSDT table memory at [mem 0x6ff6d000-0x6ff6f462] <6>[ 0.005718] ACPI: Reserving SDEV table memory at [mem 0x6ffa8000-0x6ffa8045] <6>[ 0.005718] ACPI: Reserving SSDT table memory at [mem 0x6ff62000-0x6ff6c4f9] <6>[ 0.005718] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff617bf] <6>[ 0.005719] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037] <6>[ 0.005799] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.006003] No NUMA configuration found <6>[ 0.006004] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff] <6>[ 0.006009] NODE_DATA(0) allocated [mem 0x87f292e40-0x87f2bdfff] <6>[ 0.006566] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.006570] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.006617] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.006619] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.006620] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.006622] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.006623] ACPI: HPET id: 0x8086a701 base: 0xfed00000 <7>[ 0.006630] e820: update [mem 0x6992d000-0x69947fff] System RAM ==> device reserved <6>[ 0.006635] TSC deadline timer available <6>[ 0.006636] CPU topo: Max. logical packages: 1 <6>[ 0.006637] CPU topo: Max. logical nodes: 1 <6>[ 0.006637] CPU topo: Num. nodes per package: 1 <6>[ 0.006638] CPU topo: Max. logical dies: 1 <6>[ 0.006638] CPU topo: Max. dies per package: 1 <6>[ 0.006639] CPU topo: Max. threads per core: 1 <6>[ 0.006640] CPU topo: Num. cores per package: 8 <6>[ 0.006640] CPU topo: Num. threads per package: 8 <6>[ 0.006640] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs <6>[ 0.006651] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.006652] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.006653] PM: hibernation: Registered nosave memory: [mem 0x68ff8000-0x68ff8fff] <6>[ 0.006654] PM: hibernation: Registered nosave memory: [mem 0x6992d000-0x69947fff] <6>[ 0.006655] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fffefff] <6>[ 0.006656] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x1044fffff] <6>[ 0.006657] [gap 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.006658] Booting paravirtualized kernel on bare hardware <6>[ 0.006659] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.006698] Zone ranges: <6>[ 0.006699] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006700] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006701] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.006701] Device empty <6>[ 0.006702] Movable zone start for each node <6>[ 0.006703] Early memory node ranges <6>[ 0.006703] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006704] node 0: [mem 0x0000000000100000-0x000000006cac0fff] <6>[ 0.006704] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.006705] node 0: [mem 0x0000000104500000-0x000000087f7fffff] <6>[ 0.006706] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.006712] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006726] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.008319] On node 0, zone DMA32: 13630 pages in unavailable ranges <6>[ 0.036204] On node 0, zone Normal: 17664 pages in unavailable ranges <6>[ 0.036212] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.036220] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 <6>[ 0.036546] percpu: Embedded 87 pages/cpu s233472 r8192 d114688 u524288 <7>[ 0.036550] pcpu-alloc: s233472 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.036552] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 <5>[ 0.036565] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.036659] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.036677] random: crng init done <6>[ 0.038493] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.039403] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.039465] software IO TLB: area num 8. <6>[ 0.046826] Fallback order for Node 0: 0 <6>[ 0.046829] Built 1 zonelists, mobility grouping on. Total pages: 8289632 <6>[ 0.046830] Policy zone: Normal <6>[ 0.046840] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.046840] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.046843] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.047762] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.080103] ********************************************************** <4>[ 0.080104] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.080104] ** ** <4>[ 0.080104] ** This system shows unhashed kernel memory addresses ** <4>[ 0.080105] ** via the console, logs, and other interfaces. This ** <4>[ 0.080105] ** might reduce the security of your system. ** <4>[ 0.080105] ** ** <4>[ 0.080105] ** If you see this message and you are not debugging ** <4>[ 0.080105] ** the kernel, report this immediately to your system ** <4>[ 0.080105] ** administrator! ** <4>[ 0.080106] ** ** <4>[ 0.080106] ** Use hash_pointers=always to force this mode off ** <4>[ 0.080106] ** ** <4>[ 0.080106] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.080106] ********************************************************** <6>[ 0.081188] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 0.089611] ftrace: allocating 61443 entries in 242 pages <6>[ 0.089613] ftrace: allocated 242 pages with 5 groups <6>[ 0.090676] Dynamic Preempt: lazy <6>[ 0.091177] Running RCU self tests <6>[ 0.091177] Running RCU synchronous self tests <6>[ 0.091178] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.091178] rcu: RCU lockdep checking is enabled. <6>[ 0.091179] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. <6>[ 0.091179] Trampoline variant of Tasks RCU enabled. <6>[ 0.091180] Rude variant of Tasks RCU enabled. <6>[ 0.091180] Tracing variant of Tasks RCU enabled. <6>[ 0.091180] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.091181] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 <6>[ 0.091247] Running RCU synchronous self tests <6>[ 0.091250] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.091253] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.102358] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 <6>[ 0.102835] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.103261] Console: colour dummy device 80x25 <6>[ 0.103269] printk: legacy console [tty0] enabled <6>[ 0.104464] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.104472] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.104475] ... MAX_LOCK_DEPTH: 48 <6>[ 0.104479] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.104483] ... CLASSHASH_SIZE: 4096 <6>[ 0.104486] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.104490] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.104494] ... CHAINHASH_SIZE: 262144 <6>[ 0.104497] memory used by lock dependency info: 54145 kB <6>[ 0.104502] memory used for stack traces: 4224 kB <6>[ 0.104506] per task-struct memory footprint: 1920 bytes <6>[ 0.104556] ACPI: Core revision 20251212 <6>[ 0.105461] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.105525] APIC: Switch to symmetric I/O mode setup <6>[ 0.105530] DMAR: Host address width 38 <6>[ 0.105534] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.105565] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.105601] DMAR: DRHD base: 0x000000fc810000 flags: 0x0 <6>[ 0.105621] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.105648] DMAR: DRHD base: 0x000000fc820000 flags: 0x1 <6>[ 0.105670] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda <6>[ 0.105705] DMAR: SATC flags: 0x1 <6>[ 0.105715] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2 <6>[ 0.105721] DMAR-IR: HPET id 0 under DRHD base 0xfc820000 <6>[ 0.105725] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.107754] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.112808] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 0.112827] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400) <6>[ 0.112902] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.112909] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.113091] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.113096] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.113105] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.113117] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.113124] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.113128] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.113133] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.113141] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.113157] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.113163] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.113168] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.113173] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.113179] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.113185] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.113192] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.113197] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.113202] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.113207] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.113212] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.113821] Freeing SMP alternatives memory: 56K <6>[ 0.113821] pid_max: default: 32768 minimum: 301 <6>[ 0.113821] landlock: Up and running. <6>[ 0.113821] Yama: becoming mindful. <6>[ 0.113821] AppArmor: AppArmor initialized <6>[ 0.113821] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.113821] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.113821] VFS: Finished mounting rootfs on nullfs <6>[ 0.113821] Running RCU synchronous self tests <6>[ 0.113821] Running RCU synchronous self tests <6>[ 0.113821] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1) <6>[ 0.113821] Performance Events: XSAVE Architectural LBR, PEBS fmt6+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.113870] core: cpu_core PMU driver: <6>[ 0.113878] ... version: 6 <6>[ 0.113882] ... bit width: 48 <6>[ 0.113886] ... generic counters: 10 <6>[ 0.113890] ... generic bitmap: 00000000000003ff <6>[ 0.113894] ... fixed-purpose counters: 4 <6>[ 0.113898] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.113903] ... value mask: 0000ffffffffffff <6>[ 0.113907] ... max period: 00007fffffffffff <6>[ 0.113911] ... global_ctrl mask: 0001000f000003ff <6>[ 0.113984] signal: max sigframe size: 3632 <6>[ 0.114008] Estimated ratio of average max frequency by base frequency (times 1024): 1189 <6>[ 0.114113] rcu: Hierarchical SRCU implementation. <6>[ 0.114117] rcu: Max phase no-delay instances is 400. <6>[ 0.114275] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.116268] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.116544] smp: Bringing up secondary CPUs ... <6>[ 0.116910] smpboot: x86: Booting SMP configuration: <6>[ 0.116917] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 <6>[ 0.010801] core: The event 0x5d0 is not supported as an auto-counter reload event. <6>[ 0.010801] core: cpu_atom PMU driver: <6>[ 0.010801] ... version: 6 <6>[ 0.010801] ... bit width: 48 <6>[ 0.010801] ... generic counters: 8 <6>[ 0.010801] ... generic bitmap: 00000000000000ff <6>[ 0.010801] ... fixed-purpose counters: 6 <6>[ 0.010801] ... fixed-purpose bitmap: 0000000000000077 <6>[ 0.010801] ... value mask: 0000ffffffffffff <6>[ 0.010801] ... max period: 00007fffffffffff <6>[ 0.010801] ... global_ctrl mask: 00000077000000ff <6>[ 0.123918] smp: Brought up 1 node, 8 CPUs <6>[ 0.123923] smpboot: Total of 8 processors activated (49766.40 BogoMIPS) <6>[ 0.126129] Memory: 32297496K/33158528K available (25935K kernel code, 5827K rwdata, 9724K rodata, 5776K init, 67900K bss, 837304K reserved, 0K cma-reserved) <6>[ 0.126575] devtmpfs: initialized <6>[ 0.126575] x86/mm: Memory block size: 128MB <6>[ 0.165097] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes) <6>[ 0.165804] Running RCU synchronous self tests <6>[ 0.165835] Running RCU synchronous self tests <6>[ 0.166851] Running RCU Tasks wait API self tests <6>[ 0.166852] Running RCU Tasks Rude wait API self tests <6>[ 0.166852] Running RCU Tasks Trace wait API self tests <6>[ 0.167091] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.167091] posixtimers hash table entries: 4096 (order: 7, 294912 bytes, linear) <6>[ 0.167127] futex hash table entries: 2048 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear). <6>[ 0.169138] PM: RTC time: 23:40:04, date: 2026-03-29 <6>[ 0.170530] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.172563] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.173017] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.173451] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.173577] audit: initializing netlink subsys (disabled) <6>[ 0.173963] Callback from call_rcu_tasks_trace() invoked. <5>[ 0.173968] audit: type=2000 audit(1774827604.061:1): state=initialized audit_enabled=0 res=1 <6>[ 0.175219] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.175223] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.175232] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.175240] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.175249] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.175905] cpuidle: using governor ladder <6>[ 0.175916] cpuidle: using governor menu <6>[ 0.179416] efi: Freeing EFI boot services memory: 59316K <6>[ 0.179431] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.180196] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.180248] PCI: Using configuration type 1 for base access <6>[ 0.180990] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.182023] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.182023] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.182023] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.182023] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.187539] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.187558] raid6: using avx2x2 recovery algorithm <6>[ 0.188700] fbcon: Taking over console <6>[ 0.188985] ACPI: Added _OSI(Module Device) <6>[ 0.188992] ACPI: Added _OSI(Processor Device) <6>[ 0.188999] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.839305] ACPI: 31 ACPI AML tables successfully acquired and loaded <6>[ 0.853422] ACPI: EC: EC started <6>[ 0.853434] ACPI: EC: interrupt blocked <6>[ 0.856250] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.856256] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 0.912902] Callback from call_rcu_tasks() invoked. <6>[ 1.136801] ACPI: \_SB_: platform _OSC: OS support mask [006e7eff] <6>[ 1.143182] ACPI: \_SB_: platform _OSC: OS control mask [006e7eff] <6>[ 1.145121] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.145127] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.174733] ACPI: Interpreter enabled <6>[ 1.175244] ACPI: PM: (supports S0 S4 S5) <6>[ 1.175249] ACPI: Using IOAPIC for interrupt routing <6>[ 1.180704] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.180711] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.201146] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.201197] ACPI: Enabled 13 GPEs in block 80 to DF <6>[ 1.294359] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource <6>[ 1.294680] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource <6>[ 1.298516] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.694744] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 1.710296] ACPI: \_SB_.PC00.RP02.PXP_: New power resource <6>[ 1.910142] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource <6>[ 1.913282] ACPI: \_SB_.PC00.RP04.PXP_: New power resource <6>[ 1.922706] ACPI: \_SB_.PC00.RP05.PXP_: New power resource <6>[ 1.932456] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 1.932752] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 1.933395] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.232138] ACPI: \_TZ_.FN00: New power resource <6>[ 2.233197] ACPI: \_TZ_.FN01: New power resource <6>[ 2.234161] ACPI: \_TZ_.FN02: New power resource <6>[ 2.235118] ACPI: \_TZ_.FN03: New power resource <6>[ 2.236132] ACPI: \_TZ_.FN04: New power resource <6>[ 2.239024] ACPI: \PIN_: New power resource <6>[ 2.245008] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.245044] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.250548] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 2.267234] PCI host bridge to bus 0000:00 <6>[ 2.267295] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.267309] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.267320] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.267333] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 2.267346] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window] <6>[ 2.267363] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.272664] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.273816] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.273907] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref] <6>[ 2.273924] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref] <6>[ 2.273939] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref] <6>[ 2.274002] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.276326] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.276359] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit] <6>[ 2.278583] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.278618] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit] <6>[ 2.278629] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit] <6>[ 2.280198] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port <6>[ 2.280239] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.280254] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 2.280275] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 2.280394] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.280492] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.287781] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port <6>[ 2.287881] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.287895] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 2.287916] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 2.288041] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold <6>[ 2.288131] pci 0000:00:07.1: PTM enabled (root), 4ns granularity <6>[ 2.295956] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port <6>[ 2.295999] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.296013] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 2.296034] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 2.296156] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold <6>[ 2.296238] pci 0000:00:07.2: PTM enabled (root), 4ns granularity <6>[ 2.304122] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.304163] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit] <6>[ 2.304181] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.304567] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.304599] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit] <6>[ 2.304610] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit] <6>[ 2.305787] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.305843] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit] <6>[ 2.305926] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.308910] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.308966] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit] <6>[ 2.308978] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit] <6>[ 2.309047] pci 0000:00:0d.2: supports D1 D2 <6>[ 2.309054] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.311357] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.311412] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit] <6>[ 2.311424] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit] <6>[ 2.311493] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.311500] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.314287] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.314348] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit] <6>[ 2.314428] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.318813] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.318957] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit] <6>[ 2.319066] pci 0000:00:13.0: PME# supported from D3hot <6>[ 2.320284] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.320339] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit] <6>[ 2.320417] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.321821] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.321821] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit] <6>[ 2.321821] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit] <6>[ 2.323317] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.323421] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.335994] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.336113] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.349686] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.349804] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.363151] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.363249] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.377226] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.377348] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit] <6>[ 2.377496] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.383622] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port <6>[ 2.383661] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.383673] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 2.383685] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 2.383900] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 2.384001] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity <6>[ 2.392029] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port <6>[ 2.392133] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.392176] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 2.392502] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <6>[ 2.392722] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity <6>[ 2.401136] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.403861] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.403986] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit] <6>[ 2.404008] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit] <6>[ 2.404142] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.405230] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.405301] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit] <6>[ 2.405317] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.408437] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.408556] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.409240] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.409504] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.409773] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.410080] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint <6>[ 2.410154] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff] <6>[ 2.410167] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit] <6>[ 2.410180] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit] <6>[ 2.410398] pci 0000:7f:00.0: supports D1 D2 <6>[ 2.410406] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.411453] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.412933] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.413467] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint <6>[ 2.413519] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit] <6>[ 2.413770] pci 0000:80:00.0: 15.753 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x1 link at 0000:00:1c.4 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link) <6>[ 2.415605] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.415690] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.839771] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 2.839782] Low-power S0 idle used by default for system suspend <6>[ 2.900469] ACPI: EC: interrupt unblocked <6>[ 2.900497] ACPI: EC: event unblocked <6>[ 2.900828] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 2.900828] ACPI: EC: GPE=0x6e <6>[ 2.900828] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 2.900828] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 2.901841] iommu: Default domain type: Translated <6>[ 2.901851] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 2.906568] SCSI subsystem initialized <7>[ 2.906970] libata version 3.00 loaded. <6>[ 2.907274] ACPI: bus type USB registered <6>[ 2.907554] usbcore: registered new interface driver usbfs <6>[ 2.907593] usbcore: registered new interface driver hub <6>[ 2.907684] usbcore: registered new device driver usb <6>[ 2.908068] pps_core: LinuxPPS API ver. 1 registered <6>[ 2.908076] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 2.908117] PTP clock support registered <6>[ 2.908902] EDAC MC: Ver: 3.0.0 <6>[ 2.909982] efivars: Registered efivars operations <6>[ 2.912370] NetLabel: Initializing <6>[ 2.912379] NetLabel: domain hash size = 128 <6>[ 2.912385] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 2.912500] NetLabel: unlabeled traffic allowed by default <6>[ 2.912527] mctp: management component transport protocol core <6>[ 2.912535] NET: Registered PF_MCTP protocol family <6>[ 2.912616] PCI: Using ACPI for IRQ routing <7>[ 2.929138] PCI: pci_cache_line_size set to 64 bytes <6>[ 2.929395] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <6>[ 2.929506] e820: register RAM buffer resource [mem 0x0009f000-0x0009ffff] <6>[ 2.929533] e820: register RAM buffer resource [mem 0x68ff8000-0x6bffffff] <6>[ 2.929546] e820: register RAM buffer resource [mem 0x6992d000-0x6bffffff] <6>[ 2.929558] e820: register RAM buffer resource [mem 0x6cac1000-0x6fffffff] <6>[ 2.929570] e820: register RAM buffer resource [mem 0x87f800000-0x87fffffff] <6>[ 2.930138] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 2.930138] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 2.930138] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 2.930138] vgaarb: loaded <7>[ 2.933167] Monitor-Mwait will be used to enter C-1 state <7>[ 2.933191] Monitor-Mwait will be used to enter C-2 state <7>[ 2.933191] Monitor-Mwait will be used to enter C-3 state <6>[ 2.945217] clocksource: Switched to clocksource tsc-early <5>[ 2.945821] VFS: Disk quotas dquot_6.6.0 <6>[ 2.945821] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 2.947786] AppArmor: AppArmor Filesystem Enabled <6>[ 2.947958] acpi PNP0C02:00: Skipped [io 0x002e-0x002f] <6>[ 2.947970] acpi PNP0C02:00: Skipped [io 0x004e-0x004f] <6>[ 2.947978] acpi PNP0C02:00: Skipped [io 0x0061] <6>[ 2.947986] acpi PNP0C02:00: Skipped [io 0x0063] <6>[ 2.947993] acpi PNP0C02:00: Skipped [io 0x0065] <6>[ 2.948000] acpi PNP0C02:00: Skipped [io 0x0067] <6>[ 2.948007] acpi PNP0C02:00: Skipped [io 0x0070] <6>[ 2.948013] acpi PNP0C02:00: Skipped [io 0x0080] <6>[ 2.948020] acpi PNP0C02:00: Skipped [io 0x0092] <6>[ 2.948027] acpi PNP0C02:00: Skipped [io 0x00b2-0x00b3] <6>[ 2.948041] acpi PNP0C02:00: Reserved [io 0x0680-0x069f] <6>[ 2.948052] acpi PNP0C02:00: Reserved [io 0x164e-0x164f] <6>[ 2.948115] acpi PNP0C02:01: Reserved [io 0x06a4] <6>[ 2.948125] acpi PNP0C02:01: Reserved [io 0x06a0] <6>[ 2.949674] acpi PNP0C02:04: Reserved [mem 0xfedc0000-0xfedc7fff] <6>[ 2.949690] acpi PNP0C02:04: Reserved [mem 0xd8000000-0xd8000fff] <6>[ 2.949705] acpi PNP0C02:04: Could not reserve [mem 0x00000000-0x00000fff] <6>[ 2.949716] acpi PNP0C02:04: Reserved [mem 0xc0000000-0xcfffffff] <6>[ 2.949728] acpi PNP0C02:04: Reserved [mem 0xfed20000-0xfed7ffff] <6>[ 2.949741] acpi PNP0C02:04: Could not reserve [mem 0xfc800000-0xfc81ffff] <6>[ 2.949753] acpi PNP0C02:04: Could not reserve [mem 0xfed45000-0xfed8ffff] <6>[ 2.949764] acpi PNP0C02:04: Reserved [mem 0xfee00000-0xfeefffff] <6>[ 2.951343] acpi PNP0C02:05: Reserved [mem 0xfe000000-0xfe01ffff] <6>[ 2.951358] acpi PNP0C02:05: Reserved [mem 0xfe04c000-0xfe04ffff] <6>[ 2.951370] acpi PNP0C02:05: Reserved [mem 0xfe050000-0xfe0affff] <6>[ 2.951382] acpi PNP0C02:05: Reserved [mem 0xfe0d0000-0xfe0fffff] <6>[ 2.951393] acpi PNP0C02:05: Reserved [mem 0xfe200000-0xfe7fffff] <6>[ 2.951404] acpi PNP0C02:05: Reserved [mem 0xff000000-0xffffffff] <6>[ 2.951416] acpi PNP0C02:05: Reserved [mem 0xdf000000-0xdfffffff] <6>[ 2.951434] acpi PNP0C02:05: Could not reserve [io 0x1800-0x18fe] <6>[ 2.951448] acpi PNP0C02:05: Could not reserve [mem 0xe0000000-0xe074ffff] <6>[ 2.951460] acpi PNP0C02:05: Could not reserve [mem 0xe0730000-0xe074ffff] <6>[ 2.951473] acpi PNP0C02:05: Could not reserve [mem 0xe0710000-0xefffffff] <6>[ 2.952736] acpi PNP0C02:06: Reserved [io 0x2000-0x20fe] <6>[ 2.955279] acpi PNP0C01:00: Could not reserve [mem 0x00000000-0x0009cfff] <6>[ 2.955654] pnp: PnP ACPI init <6>[ 3.004099] pnp: PnP ACPI: found 1 devices <6>[ 3.021560] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 3.021958] NET: Registered PF_INET protocol family <6>[ 3.022266] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.025508] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 3.025883] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 3.026150] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.027453] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 3.029600] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 3.030268] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.031867] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.033530] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 3.033630] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000 <6>[ 3.033648] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000 <6>[ 3.033662] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000 <6>[ 3.033744] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 3.033754] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned <6>[ 3.033764] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned <6>[ 3.033775] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned <6>[ 3.033801] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned <6>[ 3.033839] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned <6>[ 3.033865] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned <6>[ 3.033891] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned <6>[ 3.033935] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 3.033949] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 3.033962] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 3.033973] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 3.033996] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 3.034005] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff] <6>[ 3.034017] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 3.034029] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 3.034045] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 3.034053] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff] <6>[ 3.034066] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 3.034077] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 3.034094] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 3.034102] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 3.034113] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 3.034128] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 3.034165] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 3.034211] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 3.034220] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 3.034229] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 3.034238] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 3.034247] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window] <6>[ 3.034258] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] <6>[ 3.034265] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff] <6>[ 3.034274] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 3.034285] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff] <6>[ 3.034292] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 3.034301] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 3.034311] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff] <6>[ 3.034319] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 3.034327] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 3.034338] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff] <6>[ 3.034345] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff] <6>[ 3.034354] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff] <6>[ 3.035767] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 3.038110] PCI: CLS 0 bytes, default 64 <6>[ 3.038253] DMAR: No RMRR found <6>[ 3.038269] DMAR: No ATSR found <6>[ 3.038275] DMAR: dmar1: Using Queued invalidation <6>[ 3.038285] DMAR: dmar0: Using Queued invalidation <6>[ 3.038293] DMAR: dmar2: Using Queued invalidation <6>[ 3.039603] pci 0000:00:04.0: Adding to iommu group 0 <6>[ 3.039718] pci 0000:00:05.0: Adding to iommu group 1 <6>[ 3.039854] pci 0000:00:0a.0: Adding to iommu group 2 <6>[ 3.039958] pci 0000:00:0b.0: Adding to iommu group 3 <6>[ 3.044670] pci 0000:00:02.0: Adding to iommu group 4 <6>[ 3.046814] pci 0000:00:00.0: Adding to iommu group 5 <6>[ 3.046934] pci 0000:00:07.0: Adding to iommu group 6 <6>[ 3.047034] pci 0000:00:07.1: Adding to iommu group 7 <6>[ 3.047135] pci 0000:00:07.2: Adding to iommu group 8 <6>[ 3.047259] pci 0000:00:0d.0: Adding to iommu group 9 <6>[ 3.047328] pci 0000:00:0d.2: Adding to iommu group 9 <6>[ 3.047395] pci 0000:00:0d.3: Adding to iommu group 9 <6>[ 3.047502] pci 0000:00:12.0: Adding to iommu group 10 <6>[ 3.047608] pci 0000:00:13.0: Adding to iommu group 11 <6>[ 3.047717] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 3.047787] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 3.047996] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 3.048064] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 3.048130] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 3.048199] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 3.048298] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 3.048391] pci 0000:00:1c.0: Adding to iommu group 15 <6>[ 3.048537] pci 0000:00:1c.4: Adding to iommu group 16 <6>[ 3.048669] pci 0000:00:1f.0: Adding to iommu group 17 <6>[ 3.048735] pci 0000:00:1f.3: Adding to iommu group 17 <6>[ 3.048960] pci 0000:00:1f.4: Adding to iommu group 17 <6>[ 3.049029] pci 0000:00:1f.5: Adding to iommu group 17 <6>[ 3.049124] pci 0000:7f:00.0: Adding to iommu group 18 <6>[ 3.049244] pci 0000:80:00.0: Adding to iommu group 19 <6>[ 3.062449] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 3.062470] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 3.062479] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB) <6>[ 3.068306] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 3.068663] clocksource: Switched to clocksource tsc <6>[ 3.068919] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 3.077003] Initialise system trusted keyrings <5>[ 3.077103] Key type blacklist registered <6>[ 3.077414] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 3.089178] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 3.089332] ntfs3: Enabled Linux POSIX ACLs support <6>[ 3.089340] ntfs3: Read-only LZX/Xpress compression included <5>[ 3.090073] integrity: Platform Keyring initialized <5>[ 3.090100] integrity: Machine keyring initialized <6>[ 3.096574] xor: automatically using best checksumming function avx <5>[ 3.096586] Key type asymmetric registered <5>[ 3.096599] Asymmetric key parser 'x509' registered <6>[ 3.096744] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 3.097123] io scheduler mq-deadline registered <6>[ 3.098534] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.100481] pcieport 0000:00:07.0: PME: Signaling with IRQ 126 <6>[ 3.100901] pcieport 0000:00:07.0: AER: enabled with IRQ 126 <6>[ 3.102377] pcieport 0000:00:07.1: PME: Signaling with IRQ 127 <6>[ 3.102772] pcieport 0000:00:07.1: AER: enabled with IRQ 127 <6>[ 3.104228] pcieport 0000:00:07.2: PME: Signaling with IRQ 128 <6>[ 3.104657] pcieport 0000:00:07.2: AER: enabled with IRQ 128 <6>[ 3.105906] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129 <6>[ 3.106346] pcieport 0000:00:1c.0: AER: enabled with IRQ 129 <6>[ 3.108205] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130 <6>[ 3.108639] pcieport 0000:00:1c.4: AER: enabled with IRQ 130 <6>[ 3.111132] input: Lid Switch as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 3.111361] ACPI: button: Lid Switch [LID0] <6>[ 3.111901] input: Sleep Button as /devices/platform/PNP0C0E:00/input/input1 <6>[ 3.112117] ACPI: button: Sleep Button [SLPB] <6>[ 3.112564] input: Power Button as /devices/platform/PNP0C0C:00/input/input2 <6>[ 3.112694] ACPI: button: Power Button [PWRB] <6>[ 3.229829] acpi LNXTHERM:00: registered as thermal_zone0 <6>[ 3.229841] ACPI: thermal: Thermal Zone [TZ00] (40 C) <6>[ 3.231561] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 3.234628] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 3.236903] ACPI: battery: Slot [BAT0] (battery present) <6>[ 3.254664] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 3.270932] serial 0000:00:12.0: enabling device (0000 -> 0002) <5>[ 3.273560] hpet_acpi_add: no address or irqs in _CRS <6>[ 3.273666] Linux agpgart interface v0.103 <6>[ 3.274166] ACPI: bus type drm_connector registered <7>[ 3.274799] initcall simpledrm_platform_driver_init blacklisted <6>[ 3.297996] loop: module loaded <6>[ 3.439364] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 3.637054] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 3.904996] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 4.117196] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <5>[ 4.253102] Key type psk registered <6>[ 4.254998] nvme 0000:80:00.0: platform quirk: setting simple suspend <6>[ 4.255953] nvme nvme0: pci function 0000:80:00.0 <6>[ 4.256398] tun: Universal TUN/TAP device driver, 1.6 <6>[ 4.257748] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.257984] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 4.260183] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.262638] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.262670] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 4.262697] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.263227] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00 <6>[ 4.263254] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.263265] usb usb1: Product: xHCI Host Controller <6>[ 4.263273] usb usb1: Manufacturer: Linux 7.0.0-rc5-lgci-xe-xe-4815-f712205aed1e52eda-debug+ xhci-hcd <6>[ 4.263286] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 4.268495] hub 1-0:1.0: USB hub found <6>[ 4.268765] hub 1-0:1.0: 1 port detected <6>[ 4.273050] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00 <6>[ 4.273067] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.273077] usb usb2: Product: xHCI Host Controller <6>[ 4.273085] usb usb2: Manufacturer: Linux 7.0.0-rc5-lgci-xe-xe-4815-f712205aed1e52eda-debug+ xhci-hcd <6>[ 4.273098] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 4.274799] hub 2-0:1.0: USB hub found <6>[ 4.274859] hub 2-0:1.0: 3 ports detected <6>[ 4.291448] nvme nvme0: 8/0/0 default/read/poll queues <6>[ 4.301285] nvme0n1: p1 p2 <6>[ 4.303467] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.303520] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 4.306020] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.308201] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.308227] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 4.308248] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.308884] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00 <6>[ 4.308900] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.308911] usb usb3: Product: xHCI Host Controller <6>[ 4.308919] usb usb3: Manufacturer: Linux 7.0.0-rc5-lgci-xe-xe-4815-f712205aed1e52eda-debug+ xhci-hcd <6>[ 4.308931] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 4.310592] hub 3-0:1.0: USB hub found <6>[ 4.310648] hub 3-0:1.0: 8 ports detected <6>[ 4.342358] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00 <6>[ 4.342381] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.342392] usb usb4: Product: xHCI Host Controller <6>[ 4.342400] usb usb4: Manufacturer: Linux 7.0.0-rc5-lgci-xe-xe-4815-f712205aed1e52eda-debug+ xhci-hcd <6>[ 4.342412] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 4.344019] hub 4-0:1.0: USB hub found <6>[ 4.344072] hub 4-0:1.0: 2 ports detected <6>[ 4.351819] usbcore: registered new interface driver usb-storage <6>[ 4.352057] usbcore: registered new interface driver usbserial_generic <6>[ 4.352164] usbserial: USB Serial support registered for generic <6>[ 4.352248] usbcore: registered new interface driver ftdi_sio <6>[ 4.352290] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 4.352374] usbcore: registered new interface driver pl2303 <6>[ 4.352416] usbserial: USB Serial support registered for pl2303 <6>[ 4.352569] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 4.352579] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 5.066220] i8042: Can't read CTR while initializing i8042 <3>[ 5.066232] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 5.068270] mousedev: PS/2 mouse device common for all mice <6>[ 5.071059] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 5.073677] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 5.073916] rtc_cmos rtc_cmos: setting system clock to 2026-03-29T23:40:09 UTC (1774827609) <6>[ 5.074165] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 5.074231] i2c_dev: i2c /dev entries driver <6>[ 5.083548] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 5.083565] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 5.083576] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 5.083626] device-mapper: uevent: version 1.0.3 <6>[ 5.084689] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 5.084709] intel_pstate: Intel P-state driver initializing <6>[ 5.089293] Hybrid CPU capacity scaling enabled <6>[ 5.089685] processor cpu0: EM: created perf domain <6>[ 5.090008] processor cpu1: EM: created perf domain <6>[ 5.090283] processor cpu2: EM: created perf domain <6>[ 5.090555] processor cpu3: EM: created perf domain <6>[ 5.090824] processor cpu4: EM: created perf domain <6>[ 5.091086] processor cpu5: EM: created perf domain <6>[ 5.091351] processor cpu6: EM: created perf domain <6>[ 5.091620] processor cpu7: EM: created perf domain <6>[ 5.093450] intel_pstate: HWP enabled <6>[ 5.093460] sdhci: Secure Digital Host Controller Interface driver <6>[ 5.093469] sdhci: Copyright(c) Pierre Ossman <6>[ 5.093704] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 5.097709] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c] <6>[ 5.099265] drop_monitor: Initializing network drop monitor service <6>[ 5.099607] NET: Registered PF_INET6 protocol family <6>[ 5.101268] Segment Routing with IPv6 <6>[ 5.101311] In-situ OAM (IOAM) with IPv6 <6>[ 5.101361] NET: Registered PF_PACKET protocol family <5>[ 5.101681] Key type dns_resolver registered <4>[ 5.106396] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 5.107001] microcode: Current revision: 0x00000124 <6>[ 5.107788] IPI shorthand broadcast: enabled <6>[ 5.125395] sched_clock: Marking stable (5115001018, 9801913)->(5182187959, -57385028) <6>[ 5.126372] registered taskstats version 1 <5>[ 5.127430] Loading compiled-in X.509 certificates <6>[ 5.176304] Demotion targets for Node 0: null <6>[ 5.176615] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946) <6>[ 5.176624] kmemleak: Automatic memory scanning thread started <5>[ 5.176900] Key type .fscrypt registered <5>[ 5.176905] Key type fscrypt-provisioning registered <6>[ 5.180101] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 5.182443] Key type encrypted registered <6>[ 5.182454] AppArmor: AppArmor sha256 policy hashing enabled <6>[ 5.182469] ima: No TPM chip found, activating TPM-bypass! <5>[ 5.182487] Loading compiled-in module X.509 certificates <5>[ 5.183413] Loaded X.509 cert 'Build time autogenerated kernel key: 34e4ec3ff1484e20907444938a7bb9fde83c0529' <6>[ 5.183427] ima: Allocated hash algorithm: sha256 <6>[ 5.183473] ima: No architecture policies found <6>[ 5.183569] evm: Initialising EVM extended attributes: <6>[ 5.183574] evm: security.selinux <6>[ 5.183577] evm: security.SMACK64 <6>[ 5.183580] evm: security.SMACK64EXEC <6>[ 5.183583] evm: security.SMACK64TRANSMUTE <6>[ 5.183586] evm: security.SMACK64MMAP <6>[ 5.183589] evm: security.apparmor <6>[ 5.183592] evm: security.ima <6>[ 5.183594] evm: security.capability <6>[ 5.183597] evm: HMAC attrs: 0x1 <6>[ 5.185841] PM: Magic number: 2:735:707 <6>[ 5.185921] acpi SPI2011:00: hash matches <6>[ 5.186114] netconsole: network logging started <6>[ 5.186694] RAS: Correctable Errors collector initialized. <6>[ 5.186843] clk: Disabling unused clocks <6>[ 5.186853] PM: genpd: Disabling unused power domains <6>[ 5.187686] md: Waiting for all devices to be available before autodetect <6>[ 5.187691] md: If you don't use raid, use raid=noautodetect <6>[ 5.187696] md: Autodetecting RAID arrays. <6>[ 5.187704] md: autorun ... <6>[ 5.187707] md: ... autorun DONE. <6>[ 5.237494] EXT4-fs (nvme0n1p2): mounted filesystem e14561b2-a821-43fb-816a-3be81f76b65f ro with ordered data mode. Quota mode: none. <6>[ 5.237577] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 5.238293] devtmpfs: mounted <6>[ 5.238537] VFS: Pivoted into new rootfs <6>[ 5.256406] Freeing unused decrypted memory: 2036K <6>[ 5.257348] Freeing unused kernel image (initmem) memory: 5776K <6>[ 5.257373] Write protecting the kernel read-only data: 36864k <6>[ 5.257997] Freeing unused kernel image (text/rodata gap) memory: 688K <6>[ 5.258264] Freeing unused kernel image (rodata/data gap) memory: 516K <6>[ 5.263074] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 5.270130] Run /sbin/init as init process <7>[ 5.270137] with arguments: <7>[ 5.270138] /sbin/init <7>[ 5.270138] with environment: <7>[ 5.270139] HOME=/ <7>[ 5.270140] TERM=linux <7>[ 5.320955] systemd[1]: Inserted module 'autofs4' <7>[ 5.344049] systemd[1]: systemd 255.4-1ubuntu8.14 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 5.344086] systemd[1]: Detected architecture x86-64. <7>[ 5.345648] systemd[1]: Hostname set to . <7>[ 5.599828] systemd[1]: Queued start job for default target graphical.target. <7>[ 5.623524] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 5.627098] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 5.630406] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 5.630923] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 5.632017] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 5.632203] systemd[1]: Expecting device dev-disk-by\x2duuid-BBA4\x2d5DAC.device - /dev/disk/by-uuid/BBA4-5DAC... <7>[ 5.632332] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 5.632458] systemd[1]: Reached target slices.target - Slice Units. <7>[ 5.632561] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 5.632664] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 5.632773] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 5.633120] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 5.633631] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 5.634003] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 5.634893] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 5.635210] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 5.635452] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 5.635772] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 5.636126] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 5.636417] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 5.636597] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.637170] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 5.637433] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 5.653264] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 5.658044] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 5.661360] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 5.664176] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 5.670409] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 5.673382] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 5.676621] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 5.680089] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 5.683916] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 5.687725] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 5.691896] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 5.693435] systemd-journald[208]: Collecting audit messages is disabled. <7>[ 5.695629] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 5.700000] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 5.704053] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 5.709103] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 5.709290] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <7>[ 5.714273] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <6>[ 5.715685] pstore: Using crash dump compression: deflate <7>[ 5.720284] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 5.720440] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.720540] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <6>[ 5.727189] pstore: Registered efi_pstore as persistent store backend <6>[ 5.729533] fuse: init (API version 7.45) <7>[ 5.729611] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <7>[ 5.734977] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 5.871551] EXT4-fs (nvme0n1p2): re-mounted e14561b2-a821-43fb-816a-3be81f76b65f r/w. <6>[ 5.899601] Adding 8388604k swap on /swap.img. Priority:-1 extents:66 across:411435008k SS <7>[ 5.908720] systemd-journald[208]: Received client request to flush runtime journal. <7>[ 5.924840] systemd-journald[208]: /var/log/journal/50de536483fd4db8b6bcf2f985230a3b/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 5.924860] systemd-journald[208]: Rotating system journal. <4>[ 6.648314] nvme nvme0: using unchecked data buffer <6>[ 6.752392] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 6.759729] ACPI: bus type thunderbolt registered <6>[ 6.760084] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 6.769892] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v1.bin, version: Nov 13 2025*NPU40xx*ci_tag_ud202548_vpu_rc_20251112_1901-1-g72f907ffc78*72f907ffc780df5579a2fed65afc4944da8b0e44 <6>[ 6.769898] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: HW <6>[ 6.781582] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 6.841834] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 6.913125] input: Intel HID events as /devices/platform/INTC107B:00/input/input3 <6>[ 6.922389] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402) <6>[ 6.925949] intel-hid INTC107B:00: platform supports 5 button array <6>[ 6.934644] intel_rapl_common: Found RAPL domain package <6>[ 6.934655] intel_rapl_common: Found RAPL domain dram <6>[ 6.937336] pci 0000:00:05.0: Setting to D3hot <6>[ 6.937400] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4 <6>[ 6.949390] intel_pmc_core INT33A1:00: initialized <5>[ 6.972577] audit: type=1400 audit(1774827611.396:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=407 comm="apparmor_parser" <5>[ 6.973640] audit: type=1400 audit(1774827611.397:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=408 comm="apparmor_parser" <5>[ 6.974186] audit: type=1400 audit(1774827611.398:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=409 comm="apparmor_parser" <5>[ 6.976015] audit: type=1400 audit(1774827611.400:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=410 comm="apparmor_parser" <5>[ 6.977397] audit: type=1400 audit(1774827611.401:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=411 comm="apparmor_parser" <5>[ 6.979647] audit: type=1400 audit(1774827611.403:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=412 comm="apparmor_parser" <5>[ 6.981429] audit: type=1400 audit(1774827611.405:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=413 comm="apparmor_parser" <5>[ 6.984920] audit: type=1400 audit(1774827611.409:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=414 comm="apparmor_parser" <5>[ 6.986851] audit: type=1400 audit(1774827611.410:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=415 comm="apparmor_parser" <5>[ 6.987574] audit: type=1400 audit(1774827611.411:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=416 comm="apparmor_parser" <6>[ 7.034626] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0 <3>[ 7.153845] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121 <3>[ 7.154031] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121 <6>[ 7.199777] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin <6>[ 7.226126] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888 <6>[ 7.226132] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716 <6>[ 7.226134] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472 <6>[ 7.501190] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 7.532011] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 7.557654] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 7.587907] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 7.595157] r8169 0000:7f:00.0: enabling device (0000 -> 0003) <6>[ 7.658828] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer <6>[ 7.658833] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 7.658835] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 7.658836] RAPL PMU: hw unit of domain dram 2^-14 Joules <6>[ 7.658837] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 7.658837] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 7.789123] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c8:f7:85, XID 541, IRQ 195 <6>[ 7.789133] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] <6>[ 7.957377] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 7.959152] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 7.994156] block nvme0n1: No UUID available providing old NGUID <6>[ 8.215199] evm: overlay not supported <6>[ 8.277012] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.398610] intel_rapl_common: Found RAPL domain package <6>[ 8.398617] intel_rapl_common: Found RAPL domain core <6>[ 8.398619] intel_rapl_common: Found RAPL domain uncore <6>[ 8.398621] intel_rapl_common: Found RAPL domain dram <6>[ 8.398623] intel_rapl_common: Found RAPL domain psys <6>[ 8.630626] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.643375] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.748890] loop0: detected capacity change from 0 to 8 <6>[ 8.894436] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.940997] hid: raw HID events driver (C) Jiri Kosina <6>[ 8.943050] r8169 0000:7f:00.0 enp127s0: renamed from eth0 <4>[ 8.952676] spi-nor spi0.0: supply vcc not found, using dummy regulator <6>[ 8.974708] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <5>[ 9.005728] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 9.005753] 0x000000000000-0x000002000000 : "BIOS" <6>[ 9.019671] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.029915] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.054146] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.056740] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.057658] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC) <6>[ 9.058585] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.060647] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.061593] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.063590] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.064380] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.066518] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 9.068028] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 9.069414] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.073937] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.078558] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.082738] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.085431] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.090348] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.094723] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.101700] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.108301] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.113111] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.113401] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 9.119728] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.120795] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 9.125028] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.215474] r8169 0000:7f:00.0 enp127s0: Link is Down <6>[ 9.296426] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.303489] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.308828] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.314751] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.320507] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.337627] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.345145] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.350985] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.356882] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.362975] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.366558] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.377018] Consider using thermal netlink events interface <6>[ 9.379045] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.382099] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.384031] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.388734] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.396004] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.398511] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.405846] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.412315] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.418817] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.832384] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off <7>[ 17.220242] systemd-journald[208]: /var/log/journal/50de536483fd4db8b6bcf2f985230a3b/user-1000.journal: Journal file uses a different sequence number ID, rotating. <3>[ 19.393358] ucsi_acpi USBC000:00: failed to reset PPM! <3>[ 19.393438] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed <6>[ 19.539724] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 19.541750] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <6>[ 40.561645] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <7>[ 56.285561] [IGT] xe_module_load: executing <4>[ 56.285608] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 56.291166] [IGT] xe_module_load: starting subtest load <5>[ 56.608935] Setting dangerous option force_probe - tainting kernel <6>[ 56.612182] xe 0000:00:02.0: vgaarb: deactivate vga console <7>[ 56.613377] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error <6>[ 56.613796] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7>[ 56.613805] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7>[ 56.613957] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7>[ 56.614080] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7>[ 56.616094] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7>[ 56.616242] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7>[ 56.616359] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 56.616477] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7>[ 56.616595] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7>[ 56.616697] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7>[ 56.616784] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7>[ 56.616896] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7>[ 56.616987] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7>[ 56.617105] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 56.617206] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7>[ 56.617313] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7>[ 56.617417] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7>[ 56.617520] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7>[ 56.617628] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7>[ 56.617745] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7>[ 56.617880] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7>[ 56.618030] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7>[ 56.618167] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7>[ 56.618277] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7>[ 56.618383] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 56.618489] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 56.618594] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7>[ 56.618697] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 56.618798] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 56.618935] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 56.619063] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7>[ 56.619177] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 56.619280] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 56.619374] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 56.619471] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7>[ 56.619565] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 56.619660] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 56.619755] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 56.619867] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7>[ 56.619989] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 56.620112] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 56.620213] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 56.620303] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7>[ 56.620395] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 56.620487] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 56.620578] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 56.620677] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7>[ 56.621087] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7>[ 56.621234] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7>[ 56.621349] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7>[ 56.621455] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7>[ 56.621555] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7>[ 56.621655] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7>[ 56.621757] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 850) <7>[ 56.621918] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7>[ 56.622038] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7>[ 56.622163] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7>[ 56.622267] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7>[ 56.622362] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7>[ 56.622456] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7>[ 56.622548] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7>[ 56.622642] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7>[ 56.622731] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 56.622826] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7>[ 56.622943] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7>[ 56.623062] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 56.623176] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 56.623266] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 56.623356] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7>[ 56.623443] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 56.623532] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 56.623624] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 56.623719] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 56.623821] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7>[ 56.623974] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 56.624155] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7>[ 56.624300] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 56.624619] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7>[ 56.624795] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7>[ 56.624972] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7>[ 56.625125] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 56.625243] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 56.625383] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7>[ 56.625493] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7>[ 56.625621] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 56.625730] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7>[ 56.625869] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 56.626012] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7>[ 56.626152] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 56.626251] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7>[ 56.626478] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 56.626585] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7>[ 56.627104] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7>[ 56.627566] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7>[ 56.627714] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7>[ 56.628217] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7>[ 56.628310] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7>[ 56.628399] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7>[ 56.628484] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7>[ 56.628567] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7>[ 56.628649] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7>[ 56.628744] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7>[ 56.628983] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7>[ 56.629097] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7>[ 56.629182] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7>[ 56.629258] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7>[ 56.629334] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7>[ 56.631248] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7>[ 56.631391] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 56.631515] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 56.631631] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7>[ 56.631750] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7>[ 56.631895] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7>[ 56.632041] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7>[ 56.632174] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7>[ 56.632308] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 56.632431] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7>[ 56.632552] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 56.632675] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7>[ 56.632803] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 56.632962] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7>[ 56.633092] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7>[ 56.633217] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7>[ 56.633339] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 56.633462] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7>[ 56.633584] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 56.633705] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7>[ 56.633832] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 56.633869] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available. <7>[ 56.633955] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7>[ 56.634085] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7>[ 56.634206] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7>[ 56.634323] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 56.634440] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7>[ 56.634558] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 56.634677] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7>[ 56.634795] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 56.634934] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7>[ 56.639252] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 56.639423] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7>[ 56.639580] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7>[ 56.639788] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:392:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 56.640045] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:392:DDI A/PHY A] <7>[ 56.640286] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7>[ 56.640437] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7>[ 56.640585] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7>[ 56.640739] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 56.640898] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7>[ 56.641046] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 56.641191] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7>[ 56.641331] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7>[ 56.641470] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 56.641631] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:392:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 56.641877] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 56.642008] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 56.642137] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 56.642262] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 56.642388] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 56.642655] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 56.643187] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 56.644658] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on <7>[ 56.645011] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <6>[ 56.646254] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7>[ 56.670846] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 56.682846] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7>[ 56.706834] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7>[ 56.742830] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7>[ 56.754829] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7>[ 56.814849] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 57.162862] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 57.162874] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 57.162875] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.162876] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 57.162879] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 57.162881] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.162882] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD monitor <5>[ 57.162886] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.162887] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD size 20, SAD count 0 <5>[ 57.162890] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 57.162927] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 57.162929] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 57.162930] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.162942] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:393:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 57.163076] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:393:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 57.174831] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:393:eDP-1] Performing OUI wait (0 ms) <7>[ 57.186834] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:393:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 57.186980] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:393:eDP-1] AUX Backlight Control Supported! <7>[ 57.187104] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:393:eDP-1] Using VESA eDP backlight controls <7>[ 57.187215] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:393:eDP-1] DRRS type: seamless <7>[ 57.198831] xe 0000:00:02.0: [drm:drm_edp_backlight_init [drm_display_helper]] AUX A/DDI A/PHY A: Found backlight: aux_set=0 aux_enable=0 mode=2 <7>[ 57.198849] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:393:eDP-1] AUX VESA backlight enable is controlled through PWM <7>[ 57.198965] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:393:eDP-1] AUX VESA backlight level is controlled through PWM using PWM values <7>[ 57.199087] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:393:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 57.199202] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:393:eDP-1] Using AUX VESA interface for backlight control <7>[ 57.199310] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:393:eDP-1] backlight initialized, disabled, brightness 192000/192000 <7>[ 57.199471] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 57.199587] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 57.199700] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 57.199798] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 57.199907] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 57.200033] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 57.200252] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:401:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 57.200444] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 57.200576] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:401:DDI TC1/PHY TC1] <7>[ 57.200959] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:413:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 57.201103] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 57.201228] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:413:DDI TC2/PHY TC2] <7>[ 57.201486] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:421:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 57.201623] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 57.201743] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:421:DDI TC3/PHY TC3] <7>[ 57.202130] xe 0000:00:02.0: [drm:intel_vga_disable [xe]] VGA plane is disabled <6>[ 57.202258] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io:owns=io+mem <7>[ 57.202677] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] hw state readout: enabled <7>[ 57.202802] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:270:pipe B] hw state readout: disabled <7>[ 57.202948] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:389:pipe C] hw state readout: disabled <7>[ 57.203056] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] hw state readout: enabled, pipe A <7>[ 57.203160] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] hw state readout: disabled, pipe A <7>[ 57.203260] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] hw state readout: disabled, pipe A <7>[ 57.203354] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] hw state readout: disabled, pipe A <7>[ 57.203445] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] hw state readout: disabled, pipe A <7>[ 57.203535] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] hw state readout: disabled, pipe A <7>[ 57.203627] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 1B] hw state readout: disabled, pipe B <7>[ 57.203716] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:184:plane 2B] hw state readout: disabled, pipe B <7>[ 57.203803] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 3B] hw state readout: disabled, pipe B <7>[ 57.203912] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 4B] hw state readout: disabled, pipe B <7>[ 57.204011] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:plane 5B] hw state readout: disabled, pipe B <7>[ 57.204104] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:264:cursor B] hw state readout: disabled, pipe B <7>[ 57.204198] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:273:plane 1C] hw state readout: disabled, pipe C <7>[ 57.204286] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:303:plane 2C] hw state readout: disabled, pipe C <7>[ 57.204372] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:333:plane 3C] hw state readout: disabled, pipe C <7>[ 57.204458] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:363:plane 4C] hw state readout: disabled, pipe C <7>[ 57.204544] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:373:plane 5C] hw state readout: disabled, pipe C <7>[ 57.204637] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:383:cursor C] hw state readout: disabled, pipe C <7>[ 57.205717] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 57.205842] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:392:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 57.205966] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 57.206082] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 57.206177] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST A] hw state readout: disabled, pipe A <7>[ 57.206259] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:404:DP-MST B] hw state readout: disabled, pipe B <7>[ 57.206341] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:405:DP-MST C] hw state readout: disabled, pipe C <7>[ 57.206426] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 57.206510] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 57.206592] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST A] hw state readout: disabled, pipe A <7>[ 57.206671] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:416:DP-MST B] hw state readout: disabled, pipe B <7>[ 57.206751] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:417:DP-MST C] hw state readout: disabled, pipe C <7>[ 57.206848] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 57.206943] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 57.207037] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST A] hw state readout: disabled, pipe A <7>[ 57.207131] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:424:DP-MST B] hw state readout: disabled, pipe B <7>[ 57.207216] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:425:DP-MST C] hw state readout: disabled, pipe C <7>[ 57.208231] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0 <7>[ 57.208333] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 57.208433] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 57.208532] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 57.208634] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 57.208736] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 57.208845] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 57.208952] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 57.209080] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:393:eDP-1] hw state readout: enabled <7>[ 57.209187] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:402:DP-1] hw state readout: disabled <7>[ 57.209284] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:414:DP-2] hw state readout: disabled <7>[ 57.209378] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:422:DP-3] hw state readout: disabled <7>[ 57.209536] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:35:plane 1A] min_cdclk 173855 kHz <7>[ 57.209635] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:65:plane 2A] min_cdclk 0 kHz <7>[ 57.209727] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:95:plane 3A] min_cdclk 0 kHz <7>[ 57.209817] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:125:plane 4A] min_cdclk 0 kHz <7>[ 57.209906] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:135:plane 5A] min_cdclk 0 kHz <7>[ 57.209994] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:cursor A] min_cdclk 0 kHz <7>[ 57.210082] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:151:pipe A] min_cdclk 173855 kHz <7>[ 57.210165] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 1B] min_cdclk 0 kHz <7>[ 57.210243] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:184:plane 2B] min_cdclk 0 kHz <7>[ 57.210319] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:214:plane 3B] min_cdclk 0 kHz <7>[ 57.210395] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:244:plane 4B] min_cdclk 0 kHz <7>[ 57.210471] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:254:plane 5B] min_cdclk 0 kHz <7>[ 57.210547] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:264:cursor B] min_cdclk 0 kHz <7>[ 57.210622] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:270:pipe B] min_cdclk 0 kHz <7>[ 57.210702] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:273:plane 1C] min_cdclk 0 kHz <7>[ 57.210785] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:303:plane 2C] min_cdclk 0 kHz <7>[ 57.210886] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:333:plane 3C] min_cdclk 0 kHz <7>[ 57.210974] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:363:plane 4C] min_cdclk 0 kHz <7>[ 57.211059] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:373:plane 5C] min_cdclk 0 kHz <7>[ 57.211144] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:383:cursor C] min_cdclk 0 kHz <7>[ 57.211224] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:389:pipe C] min_cdclk 0 kHz <7>[ 57.211448] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:151:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 57.211529] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:270:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 57.211610] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:389:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 57.211691] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1 <7>[ 57.211803] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7>[ 57.211938] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7>[ 57.212093] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 57.212213] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A <7>[ 57.212475] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [setup_hw_state] <7>[ 57.212597] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 57.212705] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 57.212815] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 57.212926] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 57.213038] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 57.213147] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 57.213249] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64 <7>[ 57.213352] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 57.213455] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 57.213556] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 57.213655] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 57.213753] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 57.213862] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 57.213966] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 57.214068] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 57.214170] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96 <7>[ 57.214263] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 57.214356] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 57.214447] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 57.214538] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 57.214629] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 57.214718] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 57.214814] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 57.214910] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 57.215007] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 57.215104] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 57.215196] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 57.215285] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 57.215374] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 57.215464] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes, <7>[ 57.215552] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 40960, rem: 0, den: 1, <7>[ 57.215645] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 57.215742] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 57.215846] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 57.215950] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 57.216051] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 57.216151] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 57.216242] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 57.216331] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 57.216420] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 57.216508] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 57.216595] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 57.216684] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 57.216770] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 57.216870] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 57.216964] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 57.217055] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 57.217145] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 57.217233] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 57.217326] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 57.217419] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 57.217509] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 57.217599] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: no [setup_hw_state] <7>[ 57.217689] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:389:pipe C] enable: no [setup_hw_state] <7>[ 57.217777] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <7>[ 57.218120] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:151:pipe A][PLANE:35:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <6>[ 57.218217] xe 0000:00:02.0: [drm] Initial FB size exceeds half of stolen, discarding <7>[ 57.218219] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:35:plane 1A] on [CRTC:151:pipe A] <6>[ 57.224658] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.58.0 <7>[ 57.230858] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004551cf <7>[ 57.230994] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7>[ 57.231091] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7>[ 57.231178] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 57.231259] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cac <7>[ 57.231337] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 57.231413] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 57.231486] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 57.231559] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 57.231631] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 57.231700] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 57.231769] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 57.231854] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 57.231929] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 57.232003] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 57.232129] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7>[ 57.242913] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 57.243762] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 57.244004] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,0000007f <7>[ 57.244102] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,0000007f <7>[ 57.244192] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7>[ 57.244275] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7>[ 57.244348] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6>[ 57.883324] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6>[ 57.883326] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6>[ 57.883327] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7>[ 57.883489] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7>[ 57.883618] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6217]: allow rw access <7>[ 57.883735] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62af]: allow rw access <7>[ 57.883870] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 57.883984] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 57.884088] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 57.884233] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7>[ 57.884369] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7>[ 57.884511] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7>[ 57.884612] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 57.884711] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 57.884806] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 57.885950] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7>[ 57.886056] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7>[ 57.886163] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7>[ 57.886258] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7>[ 57.886352] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7>[ 57.886446] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7>[ 57.886536] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7>[ 57.886626] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7>[ 57.886715] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7>[ 57.886805] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7>[ 57.886915] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7>[ 57.887014] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7>[ 57.887108] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7>[ 57.887202] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7>[ 57.887288] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7>[ 57.887369] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7>[ 57.887450] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7>[ 57.887529] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7>[ 57.887608] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7>[ 57.887685] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7>[ 57.887764] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7>[ 57.887856] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7>[ 57.887940] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7>[ 57.888023] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7>[ 57.888110] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7>[ 57.888193] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7>[ 57.888282] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7>[ 57.888372] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7>[ 57.888458] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7>[ 57.888544] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210 <7>[ 57.888626] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8 <7>[ 57.888707] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc <7>[ 57.888788] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01 <7>[ 57.888885] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c <7>[ 57.888978] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7>[ 57.889071] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7>[ 57.889158] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7>[ 57.889239] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7>[ 57.889318] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7>[ 57.889401] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7>[ 57.889484] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7>[ 57.889565] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7>[ 57.889852] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7>[ 57.889957] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7>[ 57.890051] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7>[ 57.890142] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7>[ 57.890445] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7>[ 57.890525] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7>[ 57.890606] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7>[ 57.890682] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7>[ 57.891050] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7>[ 57.891141] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7>[ 57.891225] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7>[ 57.891300] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7>[ 57.891381] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7>[ 57.891460] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7>[ 57.891538] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7>[ 57.892006] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7>[ 57.892165] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004551cf <7>[ 57.892260] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7>[ 57.892341] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7>[ 57.892420] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 57.892499] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cac <7>[ 57.892576] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 57.892655] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 57.892732] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 57.892815] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 57.892891] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 57.892979] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 57.893059] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 57.893138] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 57.893213] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 57.893303] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7>[ 57.893474] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7>[ 57.894666] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0x1708000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 57.897681] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7>[ 57.914551] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 49152) <7>[ 57.925615] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 57.926027] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 57.927382] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4144 dwords <7>[ 57.927599] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7>[ 57.927784] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7>[ 57.927977] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7>[ 57.928125] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7>[ 57.928266] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7>[ 57.928405] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7>[ 57.928550] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7>[ 57.928699] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000 (MCR) <7>[ 57.933230] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7>[ 57.933451] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606 <7>[ 57.933655] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7>[ 57.937090] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7>[ 57.937357] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6>[ 57.944890] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.58.0 <7>[ 57.955091] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x017e71cf <7>[ 57.955321] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 57.955485] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7>[ 57.955630] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 57.955764] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000043d0 <7>[ 57.955938] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 57.956064] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 57.956180] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 57.956295] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 57.956404] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 57.956509] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 57.956613] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 57.956716] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 57.956827] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6>[ 57.958732] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6>[ 57.961329] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6>[ 57.962639] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7>[ 57.962784] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 57.962965] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7>[ 57.983856] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 57.984470] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 57.984866] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000,00000000 <7>[ 57.985202] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000,00000000 <7>[ 57.985525] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7>[ 57.985876] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7>[ 57.986202] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6>[ 57.986591] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6>[ 57.986596] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6>[ 57.986599] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6>[ 57.986603] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6>[ 57.986606] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6>[ 57.986610] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6>[ 57.986613] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6>[ 57.986616] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6>[ 57.986620] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6>[ 57.986624] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7>[ 57.987024] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7>[ 57.987460] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7>[ 57.987992] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7>[ 57.988493] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7>[ 57.988959] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7>[ 57.989389] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7>[ 57.989865] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7>[ 57.990335] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7>[ 57.990789] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7>[ 57.991355] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7>[ 57.992194] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7>[ 57.992638] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7>[ 57.993107] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7>[ 57.993566] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7>[ 57.994029] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7>[ 57.994418] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7>[ 57.994774] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7>[ 57.995178] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7>[ 57.995546] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7>[ 57.995911] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7>[ 57.996305] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7>[ 57.998322] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7>[ 57.998561] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7>[ 57.998802] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7>[ 57.999063] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7>[ 57.999273] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7>[ 57.999470] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7>[ 57.999656] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7>[ 57.999851] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xc50c] = 0x00010002 <7>[ 58.000033] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7>[ 58.000199] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7>[ 58.000356] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7>[ 58.000519] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7>[ 58.000689] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7>[ 58.000881] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7>[ 58.001043] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7>[ 58.001196] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7>[ 58.001345] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7>[ 58.001487] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7>[ 58.001627] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7>[ 58.001766] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7>[ 58.001927] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7>[ 58.002053] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7>[ 58.002173] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7>[ 58.002292] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7>[ 58.002407] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7>[ 58.002518] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7>[ 58.002628] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7>[ 58.002735] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7>[ 58.002872] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7>[ 58.002982] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7>[ 58.003105] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7>[ 58.003227] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7>[ 58.003341] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7>[ 58.003450] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7>[ 58.003557] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7>[ 58.003661] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7>[ 58.003765] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7>[ 58.003881] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7>[ 58.003986] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7>[ 58.004090] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7>[ 58.004192] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7>[ 58.004670] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7>[ 58.004772] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7>[ 58.004890] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7>[ 58.005000] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7>[ 58.005104] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7>[ 58.005210] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7>[ 58.005294] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7>[ 58.005378] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7>[ 58.005462] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7>[ 58.005544] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7>[ 58.005625] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7>[ 58.005706] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7>[ 58.006109] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7>[ 58.006203] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7>[ 58.006283] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7>[ 58.006825] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7>[ 58.006984] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x017e71cf <7>[ 58.007103] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 58.007210] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7>[ 58.007306] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 58.007389] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000043d0 <7>[ 58.007463] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 58.007535] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 58.007607] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 58.007678] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 58.007747] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 58.007824] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 58.007913] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 58.008002] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 58.008094] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7>[ 58.008199] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7>[ 58.008308] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7>[ 58.009702] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x2c63000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 58.031767] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 49152) <7>[ 58.053124] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 58.053723] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 58.056038] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7>[ 58.056374] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 58.060930] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7>[ 58.061294] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 58.065768] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7>[ 58.066163] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 58.110422] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7>[ 58.111712] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 58.112138] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 58.112468] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 58.112764] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 58.113659] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7>[ 58.113939] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7>[ 58.114184] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7>[ 58.116191] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 0: start 0x90008 <7>[ 58.116632] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 1: start 0x90108 <7>[ 58.117021] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 2: start 0x90208 <7>[ 58.117357] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 3: start 0x90308 <7>[ 58.117655] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:151:pipe A] FQ 4: start 0x903c8 <7>[ 58.117921] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 0: start 0x98008 <7>[ 58.118165] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 1: start 0x98108 <7>[ 58.118400] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 2: start 0x98208 <7>[ 58.118639] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 3: start 0x98308 <7>[ 58.118886] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:270:pipe B] FQ 4: start 0x983c8 <7>[ 58.119121] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 0: start 0x52008 <7>[ 58.119350] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 1: start 0x52108 <7>[ 58.119578] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 2: start 0x52208 <7>[ 58.119804] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 3: start 0x52308 <7>[ 58.120078] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:389:pipe C] FQ 4: start 0x523c8 <7>[ 58.120972] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 58.121300] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 58.121601] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7>[ 58.121933] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: no [fastset] <7>[ 58.122322] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:389:pipe C] enable: no [fastset] <7>[ 58.124725] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7>[ 58.125039] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7>[ 58.136959] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:270:pipe B] <7>[ 58.137488] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:389:pipe C] <7>[ 58.151076] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:393:eDP-1] adding connector to sysfs <7>[ 58.157029] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:393:eDP-1] backlight device intel_backlight registered <7>[ 58.157549] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:393:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 58.158038] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:393:eDP-1] Panel prepare <7>[ 58.159091] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 58.162025] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:393:eDP-1] generating connector hotplug event <7>[ 58.162132] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:402:DP-1] adding connector to sysfs <7>[ 58.162916] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7>[ 58.163905] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:402:DP-1] generating connector hotplug event <7>[ 58.163961] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:414:DP-2] adding connector to sysfs <7>[ 58.164477] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7>[ 58.165214] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:414:DP-2] generating connector hotplug event <7>[ 58.165253] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:422:DP-3] adding connector to sysfs <7>[ 58.165663] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 58.166318] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:422:DP-3] generating connector hotplug event <6>[ 58.166348] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7>[ 58.166379] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6>[ 58.174918] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 58.177511] input: Video Bus as /devices/pci0000:00/acpi.video_bus.0/input/input5 <7>[ 58.178496] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 58.178668] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7>[ 58.179070] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 58.179075] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 58.180005] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:35:plane 1A] no fb, skipping <7>[ 58.180122] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:270:pipe B] not active, skipping <6>[ 58.180185] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7>[ 58.180228] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:389:pipe C] not active, skipping <7>[ 58.180328] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7>[ 58.180696] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 58.180843] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 58.180991] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] <7>[ 58.180998] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:393:eDP-1] <7>[ 58.182117] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 58.182492] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 58.182624] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 58.182737] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 58.183039] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 58.183048] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 58.183051] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 58.183052] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 58.183056] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 58.183060] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 58.183062] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD monitor <5>[ 58.183069] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 58.183071] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD size 20, SAD count 0 <5>[ 58.183075] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 58.183120] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] VRR capable: yes <7>[ 58.183237] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 58.183340] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 58.183651] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] status updated from unknown to connected <5>[ 58.183899] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 58.183903] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 58.183904] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 58.184002] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] probed modes: <7>[ 58.184009] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 58.184013] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 58.184018] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] <7>[ 58.184023] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1] <7>[ 58.184205] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 58.184354] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] status updated from unknown to disconnected <7>[ 58.184359] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected <7>[ 58.184364] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] <7>[ 58.184367] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2] <7>[ 58.184510] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 58.184635] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] status updated from unknown to disconnected <7>[ 58.184639] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] disconnected <7>[ 58.184643] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] <7>[ 58.184646] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3] <7>[ 58.184777] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 58.184912] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] status updated from unknown to disconnected <7>[ 58.184916] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] disconnected <7>[ 58.184920] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:393:eDP-1] enabled? yes <7>[ 58.184924] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:402:DP-1] enabled? no <7>[ 58.184926] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:414:DP-2] enabled? no <7>[ 58.184928] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:422:DP-3] enabled? no <7>[ 58.185042] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 58.185069] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:393:eDP-1] found preferred mode: 2880x1800 <7>[ 58.185073] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 58.185093] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 2880x1800 set (0,0) <7>[ 58.185225] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 58.185224] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1] <7>[ 58.185244] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <6>[ 58.185361] xe 0000:00:02.0: [drm] Allocating fbdev: Stolen memory not preferred. <7>[ 58.185517] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2] <7>[ 58.185651] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3] <7>[ 58.186075] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7>[ 58.186549] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 58.186556] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 58.188548] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 58.210619] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb <6>[ 58.212444] fbcon: xedrmfb (fb0) is primary device <7>[ 58.217221] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 58.217488] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7>[ 58.217701] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000 <7>[ 58.217929] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 58.218127] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A] <7>[ 58.218322] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288) <7>[ 58.218519] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dpll_hw_state <7>[ 58.218707] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <6>[ 58.219064] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7>[ 58.218988] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 58.219364] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: yes, <7>[ 58.219715] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 40960, rem: 0, den: 1, <7>[ 58.219708] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7>[ 58.220334] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 58.220519] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 58.220692] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 58.220875] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 58.221046] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 58.221216] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 58.221387] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 58.221556] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 58.221723] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7>[ 58.221913] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 58.222090] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: no, <7>[ 58.222265] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 58.222439] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 58.222610] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 58.222778] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 58.222966] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 58.223133] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 58.223296] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 58.223462] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 58.223576] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 58.223625] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 58.223784] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000) <7>[ 58.223813] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 58.223966] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0) <7>[ 58.224030] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 58.224125] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7>[ 58.224223] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 58.224291] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0 <7>[ 58.224418] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 58.224524] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7>[ 58.224614] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 58.224713] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 58.224824] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 58.224899] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7>[ 58.225012] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 58.225053] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7>[ 58.225203] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7>[ 58.225197] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 58.225344] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 58.225378] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 58.225502] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 58.225556] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 58.225645] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 58.225730] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 58.225776] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 58.225924] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 58.225971] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 58.226101] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 58.226097] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 58.226229] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 58.226267] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 58.226355] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 58.226441] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 58.226481] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 58.226617] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 58.226613] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 58.226744] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 58.226783] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 58.226891] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 58.226971] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 58.227022] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 58.227144] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 58.227167] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 58.227312] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 58.227316] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 58.227442] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 58.227485] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 58.227560] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 58.227647] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 58.227699] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 58.227814] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 58.227840] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 58.227962] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:145:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 58.227973] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 58.228131] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 58.228125] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 1390840 num active planes 1 <7>[ 58.228288] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 58.228336] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7>[ 58.228447] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 58.228516] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7>[ 58.228602] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 58.228694] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 58.228757] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 58.228877] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 58.228923] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 58.229052] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7>[ 58.229072] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 58.229224] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 58.229295] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated DPLL 0 <7>[ 58.229376] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 58.229497] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0 <7>[ 58.229524] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 58.229669] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 58.229682] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset] <7>[ 58.229869] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 58.230038] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 58.230203] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 58.230375] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 58.230548] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 58.230714] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 58.230890] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7>[ 58.231046] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 58.231200] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 58.231354] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 58.231510] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 58.231663] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 58.231813] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 58.231959] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7>[ 58.232107] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7>[ 58.232260] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7>[ 58.232411] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7>[ 58.232556] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7>[ 58.232703] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7>[ 58.232858] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 58.233001] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 58.233140] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7>[ 58.233280] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 58.233417] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 58.233553] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 58.233690] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 58.234329] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 58.234497] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 58.234648] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 58.234798] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 58.235829] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 58.236000] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 58.236153] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 58.236303] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 58.236450] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 58.236594] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no, <7>[ 58.236736] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 58.236901] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 58.237052] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 58.237203] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 58.237351] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 58.237497] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 58.237647] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 58.237805] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 58.238481] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 58.238672] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 58.238864] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 58.239044] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 58.239220] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 58.239396] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <6>[ 58.239561] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <7>[ 58.239567] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 58.239737] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 58.239923] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 58.240092] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 58.240259] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 58.240426] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 58.240585] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 58.240745] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:394] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 58.240919] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 58.241076] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 58.241233] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7>[ 58.241387] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7>[ 58.241541] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7>[ 58.241694] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7>[ 58.241853] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no <6>[ 58.243201] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <7>[ 58.243327] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <6>[ 58.247959] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 58.249018] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 58.255521] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7>[ 58.255786] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7>[ 58.464952] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0 <7>[ 58.466232] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7>[ 58.471127] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off <7>[ 58.471621] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 58.471652] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 58.472106] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short <7>[ 58.472249] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 58.524112] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 58.524501] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short <7>[ 58.531863] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 58.532438] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A] <7>[ 58.532484] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A] <7>[ 58.533009] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A] <7>[ 58.533909] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7>[ 58.535007] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7>[ 58.535900] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x1341b072) <7>[ 58.536392] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A] <7>[ 58.536899] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1] <7>[ 58.537333] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A] <7>[ 58.537739] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B] <7>[ 58.538201] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C] <7>[ 58.538613] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2] <7>[ 58.539040] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A] <7>[ 58.539473] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B] <7>[ 58.539867] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C] <7>[ 58.540298] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3] <7>[ 58.540685] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A] <7>[ 58.541176] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B] <7>[ 58.541609] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C] <7>[ 58.542136] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 58.543941] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A] <7>[ 58.544464] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7>[ 58.546855] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on <7>[ 58.547270] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (486 ms remaining) <7>[ 58.559271] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 58.559601] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long <7>[ 58.559895] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 58.560178] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A] <7>[ 58.650966] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7>[ 59.041024] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 59.076963] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 59.077498] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 59.078069] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 59.114189] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 59.114795] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long <7>[ 59.115262] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 59.115779] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A] <7>[ 59.217658] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 59.217666] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 59.217675] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 59.285283] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 59.285950] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on <7>[ 59.286489] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 59.288828] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 59.290317] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 59.291246] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7>[ 59.292537] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 59.294076] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 59.295366] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 59.295854] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7>[ 59.297441] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 59.297891] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7>[ 59.298747] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7>[ 59.299343] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7>[ 59.299746] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7>[ 59.300250] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 192000 <7>[ 59.316328] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7>[ 59.318564] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1] <7>[ 59.319176] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A] <7>[ 59.321095] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 59.323001] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <6>[ 59.325068] Console: switching to colour frame buffer device 180x56 <6>[ 59.339795] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7>[ 59.339839] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7>[ 59.340703] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7>[ 59.341268] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7>[ 59.341785] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7>[ 59.342440] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7>[ 59.343055] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7>[ 59.343584] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7>[ 59.344146] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7>[ 59.344710] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7>[ 59.345277] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7>[ 59.345832] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7>[ 59.346304] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7>[ 59.346823] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7>[ 59.347284] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7>[ 59.347691] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7>[ 59.348120] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7>[ 59.348543] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7>[ 59.348914] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7>[ 59.349256] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7>[ 59.349488] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 59.349546] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 59.349572] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7>[ 59.349882] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7>[ 59.350237] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] <7>[ 59.350193] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7>[ 59.350264] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:393:eDP-1] <7>[ 59.351184] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7>[ 59.351436] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7>[ 59.351749] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7>[ 59.352207] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x80000000) <7>[ 59.352713] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7>[ 59.353212] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xa0000000) <7>[ 59.353655] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7>[ 59.354130] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa8000000) <7>[ 59.354619] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 59.355324] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 59.355901] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 59.356585] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 59.357397] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 59.357765] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 59.357993] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 59.359316] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 59.359337] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 59.359340] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 59.359342] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 59.359346] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 59.359349] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 59.359351] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD monitor <5>[ 59.359374] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 59.359376] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD size 20, SAD count 0 <5>[ 59.359380] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 59.359463] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] VRR capable: yes <7>[ 59.359645] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 59.359767] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5>[ 59.360775] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 59.360779] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 59.360780] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 59.360984] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] probed modes: <7>[ 59.361014] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 59.361025] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 59.361036] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] <7>[ 59.361045] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1] <7>[ 59.361525] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 59.361976] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected <7>[ 59.361989] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] <7>[ 59.361761] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7>[ 59.361997] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2] <7>[ 59.362180] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 59.362310] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] disconnected <7>[ 59.362314] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] <7>[ 59.362318] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3] <7>[ 59.362462] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 59.362589] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] disconnected <7>[ 59.362593] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:393:eDP-1] enabled? yes <7>[ 59.362597] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:402:DP-1] enabled? no <7>[ 59.362599] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:414:DP-2] enabled? no <7>[ 59.362601] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:422:DP-3] enabled? no <7>[ 59.362895] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 59.362930] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:393:eDP-1] found preferred mode: 2880x1800 <7>[ 59.362933] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 59.362971] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 2880x1800 set (0,0) <7>[ 59.365343] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 59.365685] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 59.385047] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 59.416914] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 59.417653] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 59.418288] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 59.439269] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 59.439840] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 59.449963] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 59.450146] [IGT] xe_module_load: finished subtest load, SUCCESS <7>[ 59.450468] [IGT] xe_module_load: exiting, ret=0 <7>[ 59.483845] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 59.484039] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 59.484158] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 59.487373] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=192000/192000 <7>[ 59.487560] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:393:eDP-1] set backlight level = 192000 <7>[ 59.487689] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 192000 <7>[ 59.501525] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 60.370345] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 60.370422] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 60.370530] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 61.906216] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD off <7>[ 61.906671] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067