<5>[ 0.000000] Linux version 7.0.0-rc4-lgci-xe-xe-4730-973a56bafac086c4d-debug+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04.1) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Mon Mar 16 18:22:40 UTC 2026 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cb59fff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x000000006cb5a000-0x000000006fed2fff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fed3000-0x000000006ff4ffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x0000000080800000-0x00000000bfffffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x00000000d0000000-0x00000000fed1ffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x00000000fed80000-0x00000000ff1fffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] System RAM <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cc32000 MEMATTR=0x699b0018 ESRT=0x68a61198 MOKvar=0x6cd66000 <6>[ 0.000000] efi: Remove mem255: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] device reserved <6>[ 0.000000] efi: Remove mem257: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] device reserved <6>[ 0.000000] SMBIOS 3.8 present. <6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D99.2508051732 08/05/2025 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3100.000 MHz processor <6>[ 0.000000] tsc: Detected 3110.400 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] System RAM ==> device reserved <7>[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] System RAM <6>[ 0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000017] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs <6>[ 0.000018] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000384] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000386] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.004886] esrt: Reserving ESRT space from 0x0000000068a61198 to 0x0000000068a612e8. <7>[ 0.004894] e820: update [mem 0x68a61000-0x68a61fff] System RAM ==> device reserved <6>[ 0.004911] Using GB pages for direct mapping <6>[ 0.005593] printk: log buffer data + meta data: 1048576 + 4456448 = 5505024 bytes <6>[ 0.005594] printk: early log buf free: 258480(98%) <6>[ 0.005594] Secure boot disabled <6>[ 0.005596] ACPI: Early table checksum verification disabled <6>[ 0.005599] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.005602] ACPI: XSDT 0x000000006FF70228 000194 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005605] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013) <6>[ 0.005608] ACPI: DSDT 0x000000006FFB6000 02555F (v02 INTEL LNL 00000002 01000013) <6>[ 0.005610] ACPI: FACS 0x000000006FEF1000 000040 <6>[ 0.005611] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005613] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005614] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005616] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005617] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005618] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005620] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005621] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005622] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005623] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005625] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000) <6>[ 0.005626] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005628] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005629] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930) <6>[ 0.005630] ACPI: SSDT 0x000000006FFDD000 009176 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005632] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005633] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930) <6>[ 0.005634] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005636] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005637] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005638] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005640] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013) <6>[ 0.005641] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013) <6>[ 0.005642] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930) <6>[ 0.005644] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005645] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930) <6>[ 0.005646] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930) <6>[ 0.005647] ACPI: LPIT 0x000000006FF85000 0000CC (v01 INTEL LNL 00000002 01000013) <6>[ 0.005649] ACPI: SSDT 0x000000006FF84000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005650] ACPI: SSDT 0x000000006FF83000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005651] ACPI: DBGP 0x000000006FF82000 000034 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005653] ACPI: DBG2 0x000000006FF81000 000054 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005654] ACPI: NHLT 0x000000006FF80000 0002E3 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005655] ACPI: SSDT 0x000000006FF7E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005657] ACPI: SSDT 0x000000006FF77000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005658] ACPI: ECDT 0x000000006FF76000 000069 (v01 LNL 00000002 01000013) <6>[ 0.005659] ACPI: DMAR 0x000000006FF75000 0000D8 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005661] ACPI: FPDT 0x000000006FF74000 000044 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005662] ACPI: SSDT 0x000000006FF73000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930) <6>[ 0.005663] ACPI: SSDT 0x000000006FF71000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005665] ACPI: SSDT 0x000000006FF6D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005666] ACPI: SDEV 0x000000006FFA8000 000046 (v01 00000000 00000000) <6>[ 0.005667] ACPI: SSDT 0x000000006FF62000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930) <6>[ 0.005669] ACPI: PHAT 0x000000006FF61000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D) <6>[ 0.005670] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005671] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113] <6>[ 0.005672] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb55e] <6>[ 0.005672] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f] <6>[ 0.005673] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387] <6>[ 0.005673] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9] <6>[ 0.005673] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa] <6>[ 0.005673] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.005674] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.005674] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.005674] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.005675] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.005675] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.005675] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6] <6>[ 0.005676] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f] <6>[ 0.005676] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1] <6>[ 0.005676] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f] <6>[ 0.005676] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4] <6>[ 0.005677] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6175] <6>[ 0.005677] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df] <6>[ 0.005677] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2] <6>[ 0.005678] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e] <6>[ 0.005678] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955] <6>[ 0.005678] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037] <6>[ 0.005678] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027] <6>[ 0.005679] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7] <6>[ 0.005679] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b] <6>[ 0.005679] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2] <6>[ 0.005680] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320] <6>[ 0.005680] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469] <6>[ 0.005680] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815] <6>[ 0.005681] ACPI: Reserving LPIT table memory at [mem 0x6ff85000-0x6ff850cb] <6>[ 0.005681] ACPI: Reserving SSDT table memory at [mem 0x6ff84000-0x6ff84d5b] <6>[ 0.005681] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff831ef] <6>[ 0.005681] ACPI: Reserving DBGP table memory at [mem 0x6ff82000-0x6ff82033] <6>[ 0.005682] ACPI: Reserving DBG2 table memory at [mem 0x6ff81000-0x6ff81053] <6>[ 0.005682] ACPI: Reserving NHLT table memory at [mem 0x6ff80000-0x6ff802e2] <6>[ 0.005682] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff7f15b] <6>[ 0.005683] ACPI: Reserving SSDT table memory at [mem 0x6ff77000-0x6ff7d53a] <6>[ 0.005683] ACPI: Reserving ECDT table memory at [mem 0x6ff76000-0x6ff76068] <6>[ 0.005683] ACPI: Reserving DMAR table memory at [mem 0x6ff75000-0x6ff750d7] <6>[ 0.005684] ACPI: Reserving FPDT table memory at [mem 0x6ff74000-0x6ff74043] <6>[ 0.005684] ACPI: Reserving SSDT table memory at [mem 0x6ff73000-0x6ff7386c] <6>[ 0.005684] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff723da] <6>[ 0.005685] ACPI: Reserving SSDT table memory at [mem 0x6ff6d000-0x6ff6f462] <6>[ 0.005685] ACPI: Reserving SDEV table memory at [mem 0x6ffa8000-0x6ffa8045] <6>[ 0.005685] ACPI: Reserving SSDT table memory at [mem 0x6ff62000-0x6ff6c4f9] <6>[ 0.005686] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff617bf] <6>[ 0.005686] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037] <6>[ 0.005780] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.006112] No NUMA configuration found <6>[ 0.006112] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff] <6>[ 0.006117] NODE_DATA(0) allocated [mem 0x87f292e40-0x87f2bdfff] <6>[ 0.006899] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.006903] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.006952] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.006954] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.006955] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.006957] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.006958] ACPI: HPET id: 0x8086a701 base: 0xfed00000 <7>[ 0.006965] e820: update [mem 0x699ca000-0x699e4fff] System RAM ==> device reserved <6>[ 0.006970] TSC deadline timer available <6>[ 0.006971] CPU topo: Max. logical packages: 1 <6>[ 0.006971] CPU topo: Max. logical nodes: 1 <6>[ 0.006972] CPU topo: Num. nodes per package: 1 <6>[ 0.006972] CPU topo: Max. logical dies: 1 <6>[ 0.006973] CPU topo: Max. dies per package: 1 <6>[ 0.006974] CPU topo: Max. threads per core: 1 <6>[ 0.006974] CPU topo: Num. cores per package: 8 <6>[ 0.006975] CPU topo: Num. threads per package: 8 <6>[ 0.006975] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs <6>[ 0.006986] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.006987] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.006988] PM: hibernation: Registered nosave memory: [mem 0x68a61000-0x68a61fff] <6>[ 0.006989] PM: hibernation: Registered nosave memory: [mem 0x699ca000-0x699e4fff] <6>[ 0.006990] PM: hibernation: Registered nosave memory: [mem 0x6cb5a000-0x6fffefff] <6>[ 0.006990] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x1044fffff] <6>[ 0.006992] [gap 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.006993] Booting paravirtualized kernel on bare hardware <6>[ 0.006994] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.007032] Zone ranges: <6>[ 0.007032] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.007033] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.007034] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.007035] Device empty <6>[ 0.007035] Movable zone start for each node <6>[ 0.007036] Early memory node ranges <6>[ 0.007037] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.007037] node 0: [mem 0x0000000000100000-0x000000006cb59fff] <6>[ 0.007038] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.007038] node 0: [mem 0x0000000104500000-0x000000087f7fffff] <6>[ 0.007040] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.007045] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.007059] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.008648] On node 0, zone DMA32: 13477 pages in unavailable ranges <6>[ 0.036468] On node 0, zone Normal: 17664 pages in unavailable ranges <6>[ 0.036475] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.036483] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 <6>[ 0.036808] percpu: Embedded 87 pages/cpu s233472 r8192 d114688 u524288 <7>[ 0.036813] pcpu-alloc: s233472 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.036815] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 <5>[ 0.036828] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.036925] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.036942] random: crng init done <6>[ 0.038768] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.039676] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.039768] software IO TLB: area num 8. <6>[ 0.047121] Fallback order for Node 0: 0 <6>[ 0.047124] Built 1 zonelists, mobility grouping on. Total pages: 8289785 <6>[ 0.047125] Policy zone: Normal <6>[ 0.047135] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.047136] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.047139] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.048077] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.079727] ********************************************************** <4>[ 0.079728] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.079729] ** ** <4>[ 0.079729] ** This system shows unhashed kernel memory addresses ** <4>[ 0.079729] ** via the console, logs, and other interfaces. This ** <4>[ 0.079729] ** might reduce the security of your system. ** <4>[ 0.079730] ** ** <4>[ 0.079730] ** If you see this message and you are not debugging ** <4>[ 0.079730] ** the kernel, report this immediately to your system ** <4>[ 0.079730] ** administrator! ** <4>[ 0.079730] ** ** <4>[ 0.079730] ** Use hash_pointers=always to force this mode off ** <4>[ 0.079731] ** ** <4>[ 0.079731] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.079731] ********************************************************** <6>[ 0.080818] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 0.089272] ftrace: allocating 61425 entries in 240 pages <6>[ 0.089274] ftrace: allocated 240 pages with 4 groups <6>[ 0.090315] Dynamic Preempt: lazy <6>[ 0.090820] Running RCU self tests <6>[ 0.090821] Running RCU synchronous self tests <6>[ 0.090821] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.090822] rcu: RCU lockdep checking is enabled. <6>[ 0.090822] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. <6>[ 0.090823] Trampoline variant of Tasks RCU enabled. <6>[ 0.090823] Rude variant of Tasks RCU enabled. <6>[ 0.090823] Tracing variant of Tasks RCU enabled. <6>[ 0.090824] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.090824] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 <6>[ 0.090890] Running RCU synchronous self tests <6>[ 0.090895] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.090898] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.102036] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 <6>[ 0.102541] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.102993] Console: colour dummy device 80x25 <6>[ 0.103002] printk: legacy console [tty0] enabled <6>[ 0.104238] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.104245] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.104249] ... MAX_LOCK_DEPTH: 48 <6>[ 0.104253] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.104257] ... CLASSHASH_SIZE: 4096 <6>[ 0.104260] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.104264] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.104268] ... CHAINHASH_SIZE: 262144 <6>[ 0.104272] memory used by lock dependency info: 54145 kB <6>[ 0.104277] memory used for stack traces: 4224 kB <6>[ 0.104281] per task-struct memory footprint: 1920 bytes <6>[ 0.104331] ACPI: Core revision 20251212 <6>[ 0.105235] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.105315] APIC: Switch to symmetric I/O mode setup <6>[ 0.105321] DMAR: Host address width 38 <6>[ 0.105325] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.105358] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.105392] DMAR: DRHD base: 0x000000fc810000 flags: 0x0 <6>[ 0.105416] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.105446] DMAR: DRHD base: 0x000000fc820000 flags: 0x1 <6>[ 0.105547] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda <6>[ 0.105729] DMAR: SATC flags: 0x1 <6>[ 0.105738] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2 <6>[ 0.105743] DMAR-IR: HPET id 0 under DRHD base 0xfc820000 <6>[ 0.105747] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.107514] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.111884] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 0.111903] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400) <6>[ 0.111978] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.111984] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.112160] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.112165] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.112174] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.112186] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.112193] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.112198] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.112202] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.112210] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.112226] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.112233] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.112238] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.112244] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.112251] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.112258] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.112266] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.112271] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.112277] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.112283] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.112289] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.112897] Freeing SMP alternatives memory: 56K <6>[ 0.112897] pid_max: default: 32768 minimum: 301 <6>[ 0.112897] landlock: Up and running. <6>[ 0.112897] Yama: becoming mindful. <6>[ 0.112897] AppArmor: AppArmor initialized <6>[ 0.112897] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.112897] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.112897] VFS: Finished mounting rootfs on nullfs <6>[ 0.112897] Running RCU synchronous self tests <6>[ 0.112897] Running RCU synchronous self tests <6>[ 0.112897] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1) <6>[ 0.112897] Performance Events: XSAVE Architectural LBR, PEBS fmt6+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.112932] core: cpu_core PMU driver: <6>[ 0.112940] ... version: 6 <6>[ 0.112944] ... bit width: 48 <6>[ 0.112948] ... generic counters: 10 <6>[ 0.112952] ... generic bitmap: 00000000000003ff <6>[ 0.112957] ... fixed-purpose counters: 4 <6>[ 0.112961] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.112965] ... value mask: 0000ffffffffffff <6>[ 0.112970] ... max period: 00007fffffffffff <6>[ 0.112974] ... global_ctrl mask: 0001000f000003ff <6>[ 0.113049] signal: max sigframe size: 3632 <6>[ 0.113073] Estimated ratio of average max frequency by base frequency (times 1024): 1189 <6>[ 0.113181] rcu: Hierarchical SRCU implementation. <6>[ 0.113185] rcu: Max phase no-delay instances is 400. <6>[ 0.113340] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.115316] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.115597] smp: Bringing up secondary CPUs ... <6>[ 0.115968] smpboot: x86: Booting SMP configuration: <6>[ 0.115975] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 <6>[ 0.010158] core: The event 0x5d0 is not supported as an auto-counter reload event. <6>[ 0.010158] core: cpu_atom PMU driver: <6>[ 0.010158] ... version: 6 <6>[ 0.010158] ... bit width: 48 <6>[ 0.010158] ... generic counters: 8 <6>[ 0.010158] ... generic bitmap: 00000000000000ff <6>[ 0.010158] ... fixed-purpose counters: 6 <6>[ 0.010158] ... fixed-purpose bitmap: 0000000000000077 <6>[ 0.010158] ... value mask: 0000ffffffffffff <6>[ 0.010158] ... max period: 00007fffffffffff <6>[ 0.010158] ... global_ctrl mask: 00000077000000ff <6>[ 0.121930] smp: Brought up 1 node, 8 CPUs <6>[ 0.121984] smpboot: Total of 8 processors activated (49766.40 BogoMIPS) <6>[ 0.124032] Memory: 32298164K/33159140K available (25915K kernel code, 5826K rwdata, 9720K rodata, 5768K init, 67912K bss, 837312K reserved, 0K cma-reserved) <6>[ 0.125094] devtmpfs: initialized <6>[ 0.126129] x86/mm: Memory block size: 128MB <6>[ 0.148947] ACPI: PM: Registering ACPI NVS region [mem 0x6fed3000-0x6ff4ffff] (512000 bytes) <6>[ 0.149429] Running RCU synchronous self tests <6>[ 0.149442] Running RCU synchronous self tests <6>[ 0.150229] Running RCU Tasks wait API self tests <6>[ 0.150934] Running RCU Tasks Rude wait API self tests <6>[ 0.150934] Running RCU Tasks Trace wait API self tests <6>[ 0.150956] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.150991] posixtimers hash table entries: 4096 (order: 7, 294912 bytes, linear) <6>[ 0.151058] futex hash table entries: 2048 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear). <6>[ 0.152430] PM: RTC time: 15:47:40, date: 2026-03-17 <6>[ 0.153183] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.154244] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.154550] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.154826] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.154886] audit: initializing netlink subsys (disabled) <5>[ 0.156052] audit: type=2000 audit(1773762460.044:1): state=initialized audit_enabled=0 res=1 <6>[ 0.156758] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.156759] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.156766] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.156771] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.156775] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.156960] cpuidle: using governor ladder <6>[ 0.156981] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.156992] cpuidle: using governor menu <6>[ 0.159535] efi: Freeing EFI boot services memory: 59320K <6>[ 0.159544] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.160018] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.160047] PCI: Using configuration type 1 for base access <6>[ 0.160177] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.162434] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.162434] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.162434] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.162434] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.172928] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.172988] raid6: using avx2x2 recovery algorithm <6>[ 0.175947] fbcon: Taking over console <6>[ 0.176069] ACPI: Added _OSI(Module Device) <6>[ 0.176074] ACPI: Added _OSI(Processor Device) <6>[ 0.176078] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.754738] ACPI: 31 ACPI AML tables successfully acquired and loaded <6>[ 0.769046] ACPI: EC: EC started <6>[ 0.769056] ACPI: EC: interrupt blocked <6>[ 0.778711] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.778734] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 0.784046] Callback from call_rcu_tasks() invoked. <6>[ 1.105473] ACPI: \_SB_: platform _OSC: OS support mask [006e7eff] <6>[ 1.123904] ACPI: \_SB_: platform _OSC: OS control mask [006e7eff] <6>[ 1.130090] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.130108] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.222169] ACPI: Interpreter enabled <6>[ 1.222281] ACPI: PM: (supports S0 S4 S5) <6>[ 1.222286] ACPI: Using IOAPIC for interrupt routing <6>[ 1.231188] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.231199] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.262804] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.262893] ACPI: Enabled 13 GPEs in block 80 to DF <6>[ 1.342615] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource <6>[ 1.343211] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource <6>[ 1.346299] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.725191] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 1.745342] ACPI: \_SB_.PC00.RP02.PXP_: New power resource <6>[ 1.777410] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource <6>[ 1.783190] ACPI: \_SB_.PC00.RP04.PXP_: New power resource <6>[ 1.808508] ACPI: \_SB_.PC00.RP05.PXP_: New power resource <6>[ 1.841872] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 1.842667] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 1.843545] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.276417] ACPI: \_TZ_.FN00: New power resource <6>[ 2.277377] ACPI: \_TZ_.FN01: New power resource <6>[ 2.278196] ACPI: \_TZ_.FN02: New power resource <6>[ 2.279448] ACPI: \_TZ_.FN03: New power resource <6>[ 2.280098] ACPI: \_TZ_.FN04: New power resource <6>[ 2.281580] ACPI: \PIN_: New power resource <6>[ 2.285285] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.285300] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.289721] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 2.300516] PCI host bridge to bus 0000:00 <6>[ 2.300550] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.300558] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.300565] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.300572] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 2.300579] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window] <6>[ 2.300587] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.305436] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.306633] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.306901] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref] <6>[ 2.306909] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref] <6>[ 2.306919] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref] <6>[ 2.306982] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.308382] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.308411] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit] <6>[ 2.309742] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.309772] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit] <6>[ 2.309779] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit] <6>[ 2.311097] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port <6>[ 2.311143] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.311154] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 2.311172] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 2.311286] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.311359] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.316301] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port <6>[ 2.316348] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.316359] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 2.316376] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 2.316491] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold <6>[ 2.316558] pci 0000:00:07.1: PTM enabled (root), 4ns granularity <6>[ 2.328230] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port <6>[ 2.328326] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.328353] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 2.328390] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 2.328613] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold <6>[ 2.328754] pci 0000:00:07.2: PTM enabled (root), 4ns granularity <6>[ 2.343118] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.343200] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit] <6>[ 2.343235] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.343990] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.344062] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit] <6>[ 2.344083] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit] <6>[ 2.345566] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.345689] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit] <6>[ 2.345852] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.350498] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.350625] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit] <6>[ 2.350645] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit] <6>[ 2.350791] pci 0000:00:0d.2: supports D1 D2 <6>[ 2.350802] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.355020] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.355147] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit] <6>[ 2.355167] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit] <6>[ 2.355313] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.355324] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.359773] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.359999] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit] <6>[ 2.360158] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.368464] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.368644] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit] <6>[ 2.368841] pci 0000:00:13.0: PME# supported from D3hot <6>[ 2.370498] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.370622] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit] <6>[ 2.370775] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.377194] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.377325] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit] <6>[ 2.377346] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit] <6>[ 2.378169] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.378445] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.393973] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.394194] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.408857] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.409073] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.433602] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.433972] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.460197] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.460589] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit] <6>[ 2.461099] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.473188] pci 0000:00:1c.0: [8086:a83c] type 01 class 0x060400 PCIe Root Port <6>[ 2.473382] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.473477] pci 0000:00:1c.0: bridge window [mem 0x94200000-0x942fffff] <6>[ 2.474145] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 2.474578] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity <6>[ 2.489330] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.493505] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.493759] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit] <6>[ 2.493796] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit] <6>[ 2.494073] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.494664] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.494847] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit] <6>[ 2.494877] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.499304] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.499527] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.500858] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.501341] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.501795] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.502879] pci 0000:7f:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint <6>[ 2.503771] pci 0000:7f:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit] <6>[ 2.508926] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.511698] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.899611] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 2.899622] Low-power S0 idle used by default for system suspend <6>[ 3.076518] ACPI: EC: interrupt unblocked <6>[ 3.076535] ACPI: EC: event unblocked <6>[ 3.076594] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 3.076605] ACPI: EC: GPE=0x6e <6>[ 3.076615] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 3.076630] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 3.077928] iommu: Default domain type: Translated <6>[ 3.077936] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 3.081047] SCSI subsystem initialized <7>[ 3.081236] libata version 3.00 loaded. <6>[ 3.081417] ACPI: bus type USB registered <6>[ 3.081736] usbcore: registered new interface driver usbfs <6>[ 3.081877] usbcore: registered new interface driver hub <6>[ 3.082026] usbcore: registered new device driver usb <6>[ 3.082406] pps_core: LinuxPPS API ver. 1 registered <6>[ 3.082419] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 3.082475] PTP clock support registered <6>[ 3.085318] EDAC MC: Ver: 3.0.0 <6>[ 3.089221] efivars: Registered efivars operations <6>[ 3.092545] NetLabel: Initializing <6>[ 3.092553] NetLabel: domain hash size = 128 <6>[ 3.092558] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 3.092659] NetLabel: unlabeled traffic allowed by default <6>[ 3.092682] mctp: management component transport protocol core <6>[ 3.092690] NET: Registered PF_MCTP protocol family <6>[ 3.092758] PCI: Using ACPI for IRQ routing <7>[ 3.110738] PCI: pci_cache_line_size set to 64 bytes <6>[ 3.110921] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <6>[ 3.111010] e820: register RAM buffer resource [mem 0x0009f000-0x0009ffff] <6>[ 3.111026] e820: register RAM buffer resource [mem 0x68a61000-0x6bffffff] <6>[ 3.111034] e820: register RAM buffer resource [mem 0x699ca000-0x6bffffff] <6>[ 3.111043] e820: register RAM buffer resource [mem 0x6cb5a000-0x6fffffff] <6>[ 3.111050] e820: register RAM buffer resource [mem 0x87f800000-0x87fffffff] <6>[ 3.111936] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 3.111949] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 3.111955] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 3.111971] vgaarb: loaded <7>[ 3.113665] Monitor-Mwait will be used to enter C-1 state <7>[ 3.113690] Monitor-Mwait will be used to enter C-2 state <7>[ 3.113694] Monitor-Mwait will be used to enter C-3 state <6>[ 3.126516] clocksource: Switched to clocksource tsc-early <5>[ 3.129194] VFS: Disk quotas dquot_6.6.0 <6>[ 3.129254] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 3.132147] AppArmor: AppArmor Filesystem Enabled <6>[ 3.132346] acpi PNP0C02:00: Skipped [io 0x002e-0x002f] <6>[ 3.132363] acpi PNP0C02:00: Skipped [io 0x004e-0x004f] <6>[ 3.132376] acpi PNP0C02:00: Skipped [io 0x0061] <6>[ 3.132388] acpi PNP0C02:00: Skipped [io 0x0063] <6>[ 3.132399] acpi PNP0C02:00: Skipped [io 0x0065] <6>[ 3.132410] acpi PNP0C02:00: Skipped [io 0x0067] <6>[ 3.132421] acpi PNP0C02:00: Skipped [io 0x0070] <6>[ 3.132433] acpi PNP0C02:00: Skipped [io 0x0080] <6>[ 3.132444] acpi PNP0C02:00: Skipped [io 0x0092] <6>[ 3.132456] acpi PNP0C02:00: Skipped [io 0x00b2-0x00b3] <6>[ 3.132475] acpi PNP0C02:00: Reserved [io 0x0680-0x069f] <6>[ 3.132492] acpi PNP0C02:00: Reserved [io 0x164e-0x164f] <6>[ 3.132591] acpi PNP0C02:01: Reserved [io 0x06a4] <6>[ 3.132608] acpi PNP0C02:01: Reserved [io 0x06a0] <6>[ 3.134951] acpi PNP0C02:04: Reserved [mem 0xfedc0000-0xfedc7fff] <6>[ 3.134973] acpi PNP0C02:04: Reserved [mem 0xd8000000-0xd8000fff] <6>[ 3.134994] acpi PNP0C02:04: Could not reserve [mem 0x00000000-0x00000fff] <6>[ 3.135013] acpi PNP0C02:04: Reserved [mem 0xc0000000-0xcfffffff] <6>[ 3.135031] acpi PNP0C02:04: Reserved [mem 0xfed20000-0xfed7ffff] <6>[ 3.135051] acpi PNP0C02:04: Could not reserve [mem 0xfc800000-0xfc81ffff] <6>[ 3.135072] acpi PNP0C02:04: Could not reserve [mem 0xfed45000-0xfed8ffff] <6>[ 3.135092] acpi PNP0C02:04: Reserved [mem 0xfee00000-0xfeefffff] <6>[ 3.137872] acpi PNP0C02:05: Reserved [mem 0xfe000000-0xfe01ffff] <6>[ 3.137891] acpi PNP0C02:05: Reserved [mem 0xfe04c000-0xfe04ffff] <6>[ 3.137908] acpi PNP0C02:05: Reserved [mem 0xfe050000-0xfe0affff] <6>[ 3.137926] acpi PNP0C02:05: Reserved [mem 0xfe0d0000-0xfe0fffff] <6>[ 3.137944] acpi PNP0C02:05: Reserved [mem 0xfe200000-0xfe7fffff] <6>[ 3.137962] acpi PNP0C02:05: Reserved [mem 0xff000000-0xffffffff] <6>[ 3.137979] acpi PNP0C02:05: Reserved [mem 0xdf000000-0xdfffffff] <6>[ 3.138000] acpi PNP0C02:05: Could not reserve [io 0x1800-0x18fe] <6>[ 3.138020] acpi PNP0C02:05: Could not reserve [mem 0xe0000000-0xe074ffff] <6>[ 3.138043] acpi PNP0C02:05: Could not reserve [mem 0xe0730000-0xe074ffff] <6>[ 3.138064] acpi PNP0C02:05: Could not reserve [mem 0xe0710000-0xefffffff] <6>[ 3.140435] acpi PNP0C02:06: Reserved [io 0x2000-0x20fe] <6>[ 3.145422] acpi PNP0C01:00: Could not reserve [mem 0x00000000-0x0009cfff] <6>[ 3.145862] pnp: PnP ACPI init <6>[ 3.235169] pnp: PnP ACPI: found 1 devices <6>[ 3.256197] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 3.256580] NET: Registered PF_INET protocol family <6>[ 3.256881] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.260078] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 3.260459] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 3.260718] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.262005] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 3.264095] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 3.264782] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.266374] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.268024] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 3.268123] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000 <6>[ 3.268142] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000 <6>[ 3.268156] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000 <6>[ 3.268239] pci 0000:00:07.0: bridge window [io 0x3000-0x3fff]: assigned <6>[ 3.268250] pci 0000:00:07.1: bridge window [io 0x4000-0x4fff]: assigned <6>[ 3.268260] pci 0000:00:07.2: bridge window [io 0x5000-0x5fff]: assigned <6>[ 3.268271] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned <6>[ 3.268317] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned <6>[ 3.268341] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned <6>[ 3.268366] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned <6>[ 3.268388] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned <6>[ 3.268434] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 3.268578] pci 0000:00:07.0: bridge window [io 0x3000-0x3fff] <6>[ 3.268590] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 3.268602] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 3.268618] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 3.268630] pci 0000:00:07.1: bridge window [io 0x4000-0x4fff] <6>[ 3.268642] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 3.268653] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 3.268669] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 3.268678] pci 0000:00:07.2: bridge window [io 0x5000-0x5fff] <6>[ 3.268690] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 3.268701] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 3.268718] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 3.268793] pci 0000:00:1c.0: bridge window [mem 0x94200000-0x942fffff] <6>[ 3.268889] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 3.268898] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 3.268906] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 3.268915] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 3.268924] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window] <6>[ 3.268934] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] <6>[ 3.268942] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff] <6>[ 3.268950] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 3.268960] pci_bus 0000:2b: resource 0 [io 0x4000-0x4fff] <6>[ 3.268967] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 3.268976] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 3.268986] pci_bus 0000:55: resource 0 [io 0x5000-0x5fff] <6>[ 3.268993] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 3.269001] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 3.269011] pci_bus 0000:7f: resource 1 [mem 0x94200000-0x942fffff] <6>[ 3.270591] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 3.272981] PCI: CLS 0 bytes, default 64 <6>[ 3.273130] DMAR: No RMRR found <6>[ 3.273146] DMAR: No ATSR found <6>[ 3.273152] DMAR: dmar1: Using Queued invalidation <6>[ 3.273191] DMAR: dmar0: Using Queued invalidation <6>[ 3.273201] DMAR: dmar2: Using Queued invalidation <6>[ 3.274505] pci 0000:00:04.0: Adding to iommu group 0 <6>[ 3.274630] pci 0000:00:05.0: Adding to iommu group 1 <6>[ 3.274752] pci 0000:00:0a.0: Adding to iommu group 2 <6>[ 3.274851] pci 0000:00:0b.0: Adding to iommu group 3 <6>[ 3.279660] pci 0000:00:02.0: Adding to iommu group 4 <6>[ 3.282456] pci 0000:00:00.0: Adding to iommu group 5 <6>[ 3.282686] pci 0000:00:07.0: Adding to iommu group 6 <6>[ 3.282782] pci 0000:00:07.1: Adding to iommu group 7 <6>[ 3.282876] pci 0000:00:07.2: Adding to iommu group 8 <6>[ 3.282999] pci 0000:00:0d.0: Adding to iommu group 9 <6>[ 3.283069] pci 0000:00:0d.2: Adding to iommu group 9 <6>[ 3.283138] pci 0000:00:0d.3: Adding to iommu group 9 <6>[ 3.283241] pci 0000:00:12.0: Adding to iommu group 10 <6>[ 3.283342] pci 0000:00:13.0: Adding to iommu group 11 <6>[ 3.283463] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 3.283526] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 3.283651] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 3.283719] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 3.283786] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 3.283855] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 3.283953] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 3.284228] pci 0000:00:1c.0: Adding to iommu group 15 <6>[ 3.284352] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 3.284420] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 3.284486] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 3.284557] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 3.284741] pci 0000:7f:00.0: Adding to iommu group 17 <6>[ 3.296279] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 3.296300] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 3.296309] software IO TLB: mapped [mem 0x0000000063b5b000-0x0000000067b5b000] (64MB) <6>[ 3.302254] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 3.302497] clocksource: Switched to clocksource tsc <6>[ 3.302664] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 3.311743] Initialise system trusted keyrings <5>[ 3.311849] Key type blacklist registered <6>[ 3.312196] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 3.323957] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 3.324116] ntfs3: Enabled Linux POSIX ACLs support <6>[ 3.324123] ntfs3: Read-only LZX/Xpress compression included <5>[ 3.325140] integrity: Platform Keyring initialized <5>[ 3.325181] integrity: Machine keyring initialized <6>[ 3.331662] xor: automatically using best checksumming function avx <5>[ 3.331674] Key type asymmetric registered <5>[ 3.331688] Asymmetric key parser 'x509' registered <6>[ 3.331839] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 3.332295] io scheduler mq-deadline registered <6>[ 3.334043] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.336461] pcieport 0000:00:07.0: PME: Signaling with IRQ 126 <6>[ 3.337072] pcieport 0000:00:07.0: AER: enabled with IRQ 126 <6>[ 3.338594] pcieport 0000:00:07.1: PME: Signaling with IRQ 127 <6>[ 3.339073] pcieport 0000:00:07.1: AER: enabled with IRQ 127 <6>[ 3.340538] pcieport 0000:00:07.2: PME: Signaling with IRQ 128 <6>[ 3.341024] pcieport 0000:00:07.2: AER: enabled with IRQ 128 <6>[ 3.342809] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129 <6>[ 3.343434] pcieport 0000:00:1c.0: AER: enabled with IRQ 129 <6>[ 3.345879] input: Lid Switch as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 3.346111] ACPI: button: Lid Switch [LID0] <6>[ 3.346563] input: Sleep Button as /devices/platform/PNP0C0E:00/input/input1 <6>[ 3.346785] ACPI: button: Sleep Button [SLPB] <6>[ 3.347251] input: Power Button as /devices/platform/PNP0C0C:00/input/input2 <6>[ 3.347387] ACPI: button: Power Button [PWRB] <6>[ 3.472247] acpi LNXTHERM:00: registered as thermal_zone0 <6>[ 3.472273] ACPI: thermal: Thermal Zone [TZ00] (43 C) <6>[ 3.474068] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 3.474307] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 3.475597] ACPI: battery: Slot [BAT0] (battery present) <6>[ 3.497412] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 3.515962] serial 0000:00:12.0: enabling device (0000 -> 0002) <5>[ 3.519617] hpet_acpi_add: no address or irqs in _CRS <6>[ 3.519836] Linux agpgart interface v0.103 <6>[ 3.520863] ACPI: bus type drm_connector registered <7>[ 3.521932] initcall simpledrm_platform_driver_init blacklisted <6>[ 3.544515] loop: module loaded <6>[ 3.582251] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 3.709040] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 3.894576] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 4.061719] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <5>[ 4.187502] Key type psk registered <6>[ 4.193359] nvme 0000:7f:00.0: platform quirk: setting simple suspend <6>[ 4.194152] nvme nvme0: pci function 0000:7f:00.0 <6>[ 4.194881] tun: Universal TUN/TAP device driver, 1.6 <6>[ 4.196013] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.196370] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 4.198271] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.200674] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.200703] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 4.200725] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.201112] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00 <6>[ 4.201134] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.201145] usb usb1: Product: xHCI Host Controller <6>[ 4.201153] usb usb1: Manufacturer: Linux 7.0.0-rc4-lgci-xe-xe-4730-973a56bafac086c4d-debug+ xhci-hcd <6>[ 4.201169] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 4.202326] hub 1-0:1.0: USB hub found <6>[ 4.202435] hub 1-0:1.0: 1 port detected <6>[ 4.206554] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00 <6>[ 4.206570] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.206581] usb usb2: Product: xHCI Host Controller <6>[ 4.206589] usb usb2: Manufacturer: Linux 7.0.0-rc4-lgci-xe-xe-4730-973a56bafac086c4d-debug+ xhci-hcd <6>[ 4.206602] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 4.207503] hub 2-0:1.0: USB hub found <6>[ 4.207570] hub 2-0:1.0: 3 ports detected <6>[ 4.227778] nvme nvme0: 8/0/0 default/read/poll queues <6>[ 4.233947] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.233986] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 4.235872] nvme0n1: p1 p2 <6>[ 4.235899] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.238480] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.238516] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 4.238541] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.238824] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00 <6>[ 4.238839] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.238850] usb usb3: Product: xHCI Host Controller <6>[ 4.238857] usb usb3: Manufacturer: Linux 7.0.0-rc4-lgci-xe-xe-4730-973a56bafac086c4d-debug+ xhci-hcd <6>[ 4.238870] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 4.239782] hub 3-0:1.0: USB hub found <6>[ 4.239834] hub 3-0:1.0: 8 ports detected <6>[ 4.271624] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00 <6>[ 4.271643] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.271654] usb usb4: Product: xHCI Host Controller <6>[ 4.271661] usb usb4: Manufacturer: Linux 7.0.0-rc4-lgci-xe-xe-4730-973a56bafac086c4d-debug+ xhci-hcd <6>[ 4.271674] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 4.272499] hub 4-0:1.0: USB hub found <6>[ 4.272546] hub 4-0:1.0: 2 ports detected <6>[ 4.280759] usbcore: registered new interface driver usb-storage <6>[ 4.280993] usbcore: registered new interface driver usbserial_generic <6>[ 4.281096] usbserial: USB Serial support registered for generic <6>[ 4.281187] usbcore: registered new interface driver ftdi_sio <6>[ 4.281228] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 4.281312] usbcore: registered new interface driver pl2303 <6>[ 4.281364] usbserial: USB Serial support registered for pl2303 <6>[ 4.281513] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 4.281524] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 5.142494] i8042: Can't read CTR while initializing i8042 <3>[ 5.142508] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 5.143036] mousedev: PS/2 mouse device common for all mice <6>[ 5.144151] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 5.146176] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 5.146426] rtc_cmos rtc_cmos: setting system clock to 2026-03-17T15:47:45 UTC (1773762465) <6>[ 5.146639] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 5.146701] i2c_dev: i2c /dev entries driver <6>[ 5.152472] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 5.152488] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 5.152500] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 5.152545] device-mapper: uevent: version 1.0.3 <6>[ 5.152928] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 5.152949] intel_pstate: Intel P-state driver initializing <6>[ 5.157164] Hybrid CPU capacity scaling enabled <6>[ 5.157537] processor cpu0: EM: created perf domain <6>[ 5.157829] processor cpu1: EM: created perf domain <6>[ 5.158110] processor cpu2: EM: created perf domain <6>[ 5.158409] processor cpu3: EM: created perf domain <6>[ 5.158692] processor cpu4: EM: created perf domain <6>[ 5.158970] processor cpu5: EM: created perf domain <6>[ 5.159253] processor cpu6: EM: created perf domain <6>[ 5.159527] processor cpu7: EM: created perf domain <6>[ 5.161111] intel_pstate: HWP enabled <6>[ 5.161122] sdhci: Secure Digital Host Controller Interface driver <6>[ 5.161131] sdhci: Copyright(c) Pierre Ossman <6>[ 5.161401] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 5.165400] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c] <6>[ 5.166980] drop_monitor: Initializing network drop monitor service <6>[ 5.167295] NET: Registered PF_INET6 protocol family <6>[ 5.168983] Segment Routing with IPv6 <6>[ 5.169026] In-situ OAM (IOAM) with IPv6 <6>[ 5.169079] NET: Registered PF_PACKET protocol family <5>[ 5.169329] Key type dns_resolver registered <4>[ 5.173508] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 5.173833] microcode: Current revision: 0x00000124 <6>[ 5.174377] IPI shorthand broadcast: enabled <6>[ 5.190049] sched_clock: Marking stable (5180001297, 9158660)->(5245917533, -56757576) <6>[ 5.191590] registered taskstats version 1 <5>[ 5.192740] Loading compiled-in X.509 certificates <6>[ 5.241920] Demotion targets for Node 0: null <6>[ 5.242151] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946) <6>[ 5.242165] kmemleak: Automatic memory scanning thread started <5>[ 5.242435] Key type .fscrypt registered <5>[ 5.242440] Key type fscrypt-provisioning registered <6>[ 5.245678] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 5.247899] Key type encrypted registered <6>[ 5.247913] AppArmor: AppArmor sha256 policy hashing enabled <6>[ 5.247961] ima: No TPM chip found, activating TPM-bypass! <5>[ 5.247985] Loading compiled-in module X.509 certificates <5>[ 5.248667] Loaded X.509 cert 'Build time autogenerated kernel key: 0558fd35d962a03a1733a46d45327e84061deba1' <6>[ 5.248680] ima: Allocated hash algorithm: sha256 <6>[ 5.248727] ima: No architecture policies found <6>[ 5.248828] evm: Initialising EVM extended attributes: <6>[ 5.248832] evm: security.selinux <6>[ 5.248835] evm: security.SMACK64 <6>[ 5.248838] evm: security.SMACK64EXEC <6>[ 5.248841] evm: security.SMACK64TRANSMUTE <6>[ 5.248844] evm: security.SMACK64MMAP <6>[ 5.248847] evm: security.apparmor <6>[ 5.248850] evm: security.ima <6>[ 5.248853] evm: security.capability <6>[ 5.248856] evm: HMAC attrs: 0x1 <6>[ 5.251098] PM: Magic number: 2:87:791 <6>[ 5.251377] netconsole: network logging started <6>[ 5.251967] RAS: Correctable Errors collector initialized. <6>[ 5.252496] clk: Disabling unused clocks <6>[ 5.252514] PM: genpd: Disabling unused power domains <6>[ 5.252958] md: Waiting for all devices to be available before autodetect <6>[ 5.252964] md: If you don't use raid, use raid=noautodetect <6>[ 5.252969] md: Autodetecting RAID arrays. <6>[ 5.252977] md: autorun ... <6>[ 5.252980] md: ... autorun DONE. <6>[ 5.300824] EXT4-fs (nvme0n1p2): mounted filesystem b37a6082-7ae3-4b8a-a642-ab1454bee61f ro with ordered data mode. Quota mode: none. <6>[ 5.300900] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 5.302486] devtmpfs: mounted <6>[ 5.302659] VFS: Pivoted into new rootfs <6>[ 5.321026] Freeing unused decrypted memory: 2036K <6>[ 5.321851] Freeing unused kernel image (initmem) memory: 5768K <6>[ 5.321875] Write protecting the kernel read-only data: 36864k <6>[ 5.322309] Freeing unused kernel image (text/rodata gap) memory: 708K <6>[ 5.322454] Freeing unused kernel image (rodata/data gap) memory: 520K <6>[ 5.327414] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 5.331271] Run /sbin/init as init process <7>[ 5.331279] with arguments: <7>[ 5.331280] /sbin/init <7>[ 5.331281] with environment: <7>[ 5.331282] HOME=/ <7>[ 5.331283] TERM=linux <6>[ 5.360834] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 5.372602] usb 4-2: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=31.00 <6>[ 5.372631] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <6>[ 5.372642] usb 4-2: Product: USB 10/100/1G/2.5G LAN <6>[ 5.372651] usb 4-2: Manufacturer: Realtek <6>[ 5.372658] usb 4-2: SerialNumber: 001000001 <7>[ 5.387880] systemd[1]: Inserted module 'autofs4' <7>[ 5.412200] systemd[1]: systemd 255.4-1ubuntu8.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 5.412234] systemd[1]: Detected architecture x86-64. <7>[ 5.413293] systemd[1]: Hostname set to . <7>[ 5.627406] systemd[1]: Queued start job for default target graphical.target. <7>[ 5.648945] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 5.650990] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 5.652577] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 5.652840] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 5.653570] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 5.653681] systemd[1]: Expecting device dev-disk-by\x2duuid-219B\x2dDC54.device - /dev/disk/by-uuid/219B-DC54... <7>[ 5.653764] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 5.653844] systemd[1]: Reached target slices.target - Slice Units. <7>[ 5.653914] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 5.653980] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 5.654049] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 5.654448] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 5.654844] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 5.655123] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 5.655482] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 5.655764] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 5.655978] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 5.656285] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 5.656606] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 5.656882] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 5.657060] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.657405] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 5.657681] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 5.665472] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 5.668216] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 5.671138] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 5.674005] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 5.680926] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 5.684106] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 5.687993] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 5.691591] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 5.694657] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 5.697387] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 5.702482] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 5.707322] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 5.711400] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 5.715050] systemd-journald[204]: Collecting audit messages is disabled. <7>[ 5.716517] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 5.721640] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 5.721793] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <7>[ 5.725854] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <6>[ 5.728384] pstore: Using crash dump compression: deflate <7>[ 5.731130] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 5.731496] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.731566] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <6>[ 5.733426] fuse: init (API version 7.45) <7>[ 5.737847] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <6>[ 5.739457] pstore: Registered efi_pstore as persistent store backend <7>[ 5.742941] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 5.876725] EXT4-fs (nvme0n1p2): re-mounted b37a6082-7ae3-4b8a-a642-ab1454bee61f r/w. <6>[ 5.903445] Adding 8388604k swap on /swap.img. Priority:-1 extents:66 across:379453440k SS <7>[ 5.926742] systemd-journald[204]: Received client request to flush runtime journal. <7>[ 5.940443] systemd-journald[204]: /var/log/journal/4047567b68bc48c181f4cb81a39fc2c6/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 5.940454] systemd-journald[204]: Rotating system journal. <4>[ 6.622871] nvme nvme0: using unchecked data buffer <6>[ 6.775044] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 6.777724] ACPI: bus type thunderbolt registered <6>[ 6.778749] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 6.797712] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v1.bin, version: Nov 13 2025*NPU40xx*ci_tag_ud202548_vpu_rc_20251112_1901-1-g72f907ffc78*72f907ffc780df5579a2fed65afc4944da8b0e44 <6>[ 6.797720] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: HW <6>[ 6.834178] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <4>[ 6.869501] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring <6>[ 6.873253] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 6.890582] input: Intel HID events as /devices/platform/INTC107B:00/input/input3 <6>[ 6.904411] intel-hid INTC107B:00: platform supports 5 button array <6>[ 6.906060] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4 <6>[ 6.922082] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402) <6>[ 6.930455] intel_rapl_common: Found RAPL domain package <6>[ 6.930465] intel_rapl_common: Found RAPL domain dram <6>[ 6.947969] pci 0000:00:05.0: Setting to D3hot <6>[ 6.960887] intel_pmc_core INT33A1:00: initialized <3>[ 6.973380] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121 <3>[ 6.973674] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121 <5>[ 6.980329] audit: type=1400 audit(1773762467.331:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=404 comm="apparmor_parser" <5>[ 6.980615] audit: type=1400 audit(1773762467.332:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=405 comm="apparmor_parser" <5>[ 6.981807] audit: type=1400 audit(1773762467.333:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=406 comm="apparmor_parser" <5>[ 6.984057] audit: type=1400 audit(1773762467.335:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=407 comm="apparmor_parser" <5>[ 6.987146] audit: type=1400 audit(1773762467.338:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=408 comm="apparmor_parser" <5>[ 6.990666] audit: type=1400 audit(1773762467.342:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=409 comm="apparmor_parser" <5>[ 6.994149] audit: type=1400 audit(1773762467.345:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=411 comm="apparmor_parser" <5>[ 7.000582] audit: type=1400 audit(1773762467.352:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=412 comm="apparmor_parser" <5>[ 7.002952] audit: type=1400 audit(1773762467.354:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=413 comm="apparmor_parser" <5>[ 7.003839] audit: type=1400 audit(1773762467.355:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=414 comm="apparmor_parser" <6>[ 7.176660] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0 <6>[ 7.243076] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin <6>[ 7.268945] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888 <6>[ 7.268955] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716 <6>[ 7.268957] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472 <6>[ 7.524404] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 7.538826] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 7.574865] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 7.606956] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 7.710078] usbcore: registered new device driver r8152-cfgselector <6>[ 7.715803] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 7.715808] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 7.715809] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 7.715810] RAPL PMU: hw unit of domain dram 2^-14 Joules <6>[ 7.715811] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 7.842311] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 7.845089] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.853449] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 7.878756] block nvme0n1: No UUID available providing old NGUID <6>[ 7.992962] r8152-cfgselector 4-2: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 8.252597] evm: overlay not supported <6>[ 8.263107] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.269845] usbcore: registered new interface driver r8152 <6>[ 8.281934] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.430127] usbcore: registered new interface driver cdc_ether <6>[ 8.441384] usbcore: registered new interface driver cdc_ncm <6>[ 8.484126] usbcore: registered new interface driver cdc_wdm <6>[ 8.540735] intel_rapl_common: Found RAPL domain package <6>[ 8.540741] intel_rapl_common: Found RAPL domain core <6>[ 8.540743] intel_rapl_common: Found RAPL domain dram <6>[ 8.540745] intel_rapl_common: Found RAPL domain psys <6>[ 8.550070] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.552998] usbcore: registered new interface driver cdc_mbim <6>[ 8.658909] loop0: detected capacity change from 0 to 8 <6>[ 8.713925] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.722245] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.728842] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.876571] hid: raw HID events driver (C) Jiri Kosina <6>[ 8.910582] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <4>[ 8.927883] spi-nor spi0.0: supply vcc not found, using dummy regulator <5>[ 8.954445] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 8.954497] 0x000000000000-0x000002000000 : "BIOS" <6>[ 8.967930] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.972579] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.008829] r8152 4-2:1.0 enx00e04c402a2b: renamed from eth0 <6>[ 9.017852] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.019070] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.025795] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.026945] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.040738] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.044922] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.046432] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.048853] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.058751] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 9.062501] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 9.064579] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.071733] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.090050] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.098093] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.100577] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.110976] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.118713] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.119664] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.122544] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 9.125791] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 9.134983] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.148108] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.280735] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.291332] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.295749] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.301437] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.307823] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.314623] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.320731] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.327473] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.335901] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.342094] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.342500] Consider using thermal netlink events interface <6>[ 9.347278] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.354979] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.358070] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.363954] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.368457] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.373522] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.379542] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.383886] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.389492] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.394878] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 10.301215] typec port0: bound usb3-port1 (ops connector_ops) <6>[ 10.301262] typec port0: bound usb2-port1 (ops connector_ops) <6>[ 10.301427] typec port0: bound usb4_port1 (ops connector_ops [thunderbolt]) <6>[ 11.352684] typec port1: bound usb3-port2 (ops connector_ops) <6>[ 11.352728] typec port1: bound usb2-port2 (ops connector_ops) <6>[ 11.352765] typec port1: bound usb4_port3 (ops connector_ops [thunderbolt]) <6>[ 14.455144] r8152 4-2:1.0 enx00e04c402a2b: carrier on <6>[ 19.540905] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 19.544408] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 33.666665] systemd-journald[204]: /var/log/journal/4047567b68bc48c181f4cb81a39fc2c6/user-1000.journal: Journal file uses a different sequence number ID, rotating. <7>[ 52.598799] [IGT] xe_module_load: executing <4>[ 52.598846] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 52.607470] [IGT] xe_module_load: starting subtest load <5>[ 52.918958] Setting dangerous option force_probe - tainting kernel <6>[ 52.922212] xe 0000:00:02.0: vgaarb: deactivate vga console <7>[ 52.923716] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error <6>[ 52.924227] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7>[ 52.924237] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7>[ 52.924385] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7>[ 52.924499] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7>[ 52.926962] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7>[ 52.927123] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7>[ 52.927234] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 52.927367] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7>[ 52.927498] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7>[ 52.927611] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7>[ 52.927715] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7>[ 52.927810] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7>[ 52.927898] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7>[ 52.928004] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 52.928108] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7>[ 52.928227] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7>[ 52.928338] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7>[ 52.928450] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7>[ 52.928565] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7>[ 52.928685] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7>[ 52.928799] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7>[ 52.928912] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7>[ 52.929020] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7>[ 52.929126] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7>[ 52.929231] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.929339] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.929452] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7>[ 52.929565] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.929671] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.929775] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.929888] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7>[ 52.929998] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.930103] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.930203] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.930304] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7>[ 52.930431] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.930540] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.930649] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.930752] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7>[ 52.930852] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.930950] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.931046] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.931142] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7>[ 52.931235] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.931334] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.931435] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.931542] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7>[ 52.932031] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7>[ 52.932180] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7>[ 52.932302] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7>[ 52.932443] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7>[ 52.932569] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7>[ 52.932697] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7>[ 52.932807] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 850) <7>[ 52.932916] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7>[ 52.933021] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7>[ 52.933135] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7>[ 52.933251] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7>[ 52.933383] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7>[ 52.933505] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7>[ 52.933628] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7>[ 52.933732] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7>[ 52.933829] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 52.933925] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7>[ 52.934024] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7>[ 52.934125] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 52.934226] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 52.934331] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 52.934439] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7>[ 52.934547] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 52.934649] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 52.934745] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 52.934839] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 52.934937] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7>[ 52.935057] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 52.935206] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7>[ 52.935375] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 52.935713] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7>[ 52.935896] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7>[ 52.936036] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7>[ 52.936146] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 52.936255] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 52.936410] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7>[ 52.936532] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7>[ 52.936670] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 52.936781] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7>[ 52.936896] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 52.936997] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7>[ 52.937111] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 52.937212] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7>[ 52.937452] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 52.937562] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7>[ 52.938003] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7>[ 52.938502] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7>[ 52.938667] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7>[ 52.938766] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7>[ 52.938857] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7>[ 52.938945] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7>[ 52.939032] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7>[ 52.939118] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7>[ 52.939201] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7>[ 52.939284] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7>[ 52.939377] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7>[ 52.939465] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7>[ 52.939552] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7>[ 52.939637] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7>[ 52.939715] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7>[ 52.942470] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7>[ 52.942635] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 52.942759] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 52.942952] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7>[ 52.943152] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7>[ 52.943361] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7>[ 52.943551] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7>[ 52.943729] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7>[ 52.944025] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 52.944366] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7>[ 52.944677] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 52.944985] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7>[ 52.945303] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 52.945675] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7>[ 52.946007] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7>[ 52.946306] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7>[ 52.946434] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available. <7>[ 52.946627] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 52.946910] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7>[ 52.947185] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 52.947516] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7>[ 52.947790] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 52.948057] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7>[ 52.948396] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7>[ 52.948664] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7>[ 52.948928] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 52.949248] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7>[ 52.949538] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 52.949800] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7>[ 52.950114] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 52.950375] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7>[ 52.956888] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 52.957217] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7>[ 52.957570] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7>[ 52.957951] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:391:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 52.958382] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:391:DDI A/PHY A] <7>[ 52.958839] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7>[ 52.959143] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7>[ 52.959457] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7>[ 52.959767] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 52.960072] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7>[ 52.960374] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 52.960674] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7>[ 52.960950] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7>[ 52.961219] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 52.961550] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:391:DDI A/PHY A] initial power sequencer: PPS 0 <6>[ 52.961885] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7>[ 52.961872] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 52.962135] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 52.962433] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 52.962677] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 52.962916] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 52.963196] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 52.963560] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 52.965140] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turning VDD on <7>[ 52.965284] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 52.989338] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 53.001330] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7>[ 53.025311] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7>[ 53.061293] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7>[ 53.073289] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7>[ 53.133289] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 53.481190] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 53.481201] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.481203] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.481204] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 53.481207] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 53.481209] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.481211] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] ELD monitor <5>[ 53.481216] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.481217] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] ELD size 20, SAD count 0 <5>[ 53.481219] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.481258] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.481259] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.481260] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.481274] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:392:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.481399] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:392:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.493153] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:392:eDP-1] Performing OUI wait (0 ms) <7>[ 53.505167] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:392:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 53.505302] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:392:eDP-1] AUX Backlight Control Supported! <7>[ 53.505413] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:392:eDP-1] Using VESA eDP backlight controls <7>[ 53.505519] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:392:eDP-1] DRRS type: seamless <7>[ 53.518148] xe 0000:00:02.0: [drm:drm_edp_backlight_init [drm_display_helper]] AUX A/DDI A/PHY A: Found backlight: aux_set=0 aux_enable=0 mode=2 <7>[ 53.518168] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:392:eDP-1] AUX VESA backlight enable is controlled through PWM <7>[ 53.518291] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:392:eDP-1] AUX VESA backlight level is controlled through PWM using PWM values <7>[ 53.518402] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:392:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 53.518514] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:392:eDP-1] Using AUX VESA interface for backlight control <7>[ 53.518610] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:392:eDP-1] backlight initialized, disabled, brightness 192000/192000 <7>[ 53.518765] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 53.518875] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 53.518974] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 53.519068] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 53.519170] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 53.519299] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 53.519515] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:400:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 53.519695] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 53.519828] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:400:DDI TC1/PHY TC1] <7>[ 53.520191] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:412:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 53.520336] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 53.520458] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:412:DDI TC2/PHY TC2] <7>[ 53.520700] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:420:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 53.520830] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 53.520948] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:420:DDI TC3/PHY TC3] <7>[ 53.521355] xe 0000:00:02.0: [drm:intel_vga_disable [xe]] VGA plane is disabled <6>[ 53.521469] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io:owns=io+mem <7>[ 53.521889] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:150:pipe A] hw state readout: enabled <7>[ 53.522010] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:269:pipe B] hw state readout: disabled <7>[ 53.522136] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:388:pipe C] hw state readout: disabled <7>[ 53.522234] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:34:plane 1A] hw state readout: enabled, pipe A <7>[ 53.522340] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:64:plane 2A] hw state readout: disabled, pipe A <7>[ 53.522441] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 3A] hw state readout: disabled, pipe A <7>[ 53.522539] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:124:plane 4A] hw state readout: disabled, pipe A <7>[ 53.522626] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:134:plane 5A] hw state readout: disabled, pipe A <7>[ 53.522713] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:144:cursor A] hw state readout: disabled, pipe A <7>[ 53.522798] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:153:plane 1B] hw state readout: disabled, pipe B <7>[ 53.522882] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:plane 2B] hw state readout: disabled, pipe B <7>[ 53.522966] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:213:plane 3B] hw state readout: disabled, pipe B <7>[ 53.523048] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:243:plane 4B] hw state readout: disabled, pipe B <7>[ 53.523136] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:253:plane 5B] hw state readout: disabled, pipe B <7>[ 53.523224] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:263:cursor B] hw state readout: disabled, pipe B <7>[ 53.523313] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:272:plane 1C] hw state readout: disabled, pipe C <7>[ 53.523402] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:302:plane 2C] hw state readout: disabled, pipe C <7>[ 53.523487] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:332:plane 3C] hw state readout: disabled, pipe C <7>[ 53.523567] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:362:plane 4C] hw state readout: disabled, pipe C <7>[ 53.523647] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:372:plane 5C] hw state readout: disabled, pipe C <7>[ 53.523728] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:382:cursor C] hw state readout: disabled, pipe C <7>[ 53.524796] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 53.524917] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:391:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 53.525013] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 53.525103] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:400:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 53.525210] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST A] hw state readout: disabled, pipe A <7>[ 53.525302] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST B] hw state readout: disabled, pipe B <7>[ 53.525393] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:404:DP-MST C] hw state readout: disabled, pipe C <7>[ 53.525489] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 53.525578] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:412:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 53.525660] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST A] hw state readout: disabled, pipe A <7>[ 53.525743] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST B] hw state readout: disabled, pipe B <7>[ 53.525824] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:416:DP-MST C] hw state readout: disabled, pipe C <7>[ 53.525907] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 53.525990] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:420:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 53.526073] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST A] hw state readout: disabled, pipe A <7>[ 53.526170] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST B] hw state readout: disabled, pipe B <7>[ 53.526259] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:424:DP-MST C] hw state readout: disabled, pipe C <7>[ 53.527280] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving DPLL 0 <7>[ 53.527391] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 53.527494] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 53.527595] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 53.527696] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 53.527796] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 53.527894] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 53.527986] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 53.528105] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:392:eDP-1] hw state readout: enabled <7>[ 53.528223] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:401:DP-1] hw state readout: disabled <7>[ 53.528319] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:413:DP-2] hw state readout: disabled <7>[ 53.528410] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:421:DP-3] hw state readout: disabled <7>[ 53.528571] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:34:plane 1A] min_cdclk 173855 kHz <7>[ 53.528657] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:64:plane 2A] min_cdclk 0 kHz <7>[ 53.528744] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 3A] min_cdclk 0 kHz <7>[ 53.528828] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:124:plane 4A] min_cdclk 0 kHz <7>[ 53.528909] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:134:plane 5A] min_cdclk 0 kHz <7>[ 53.528989] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:144:cursor A] min_cdclk 0 kHz <7>[ 53.529069] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:150:pipe A] min_cdclk 173855 kHz <7>[ 53.529166] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:153:plane 1B] min_cdclk 0 kHz <7>[ 53.529251] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:plane 2B] min_cdclk 0 kHz <7>[ 53.529334] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:213:plane 3B] min_cdclk 0 kHz <7>[ 53.529416] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:243:plane 4B] min_cdclk 0 kHz <7>[ 53.529498] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:253:plane 5B] min_cdclk 0 kHz <7>[ 53.529578] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:263:cursor B] min_cdclk 0 kHz <7>[ 53.529652] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:269:pipe B] min_cdclk 0 kHz <7>[ 53.529725] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:272:plane 1C] min_cdclk 0 kHz <7>[ 53.529799] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:302:plane 2C] min_cdclk 0 kHz <7>[ 53.529873] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:332:plane 3C] min_cdclk 0 kHz <7>[ 53.529951] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:362:plane 4C] min_cdclk 0 kHz <7>[ 53.530031] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:372:plane 5C] min_cdclk 0 kHz <7>[ 53.530111] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:382:cursor C] min_cdclk 0 kHz <7>[ 53.530208] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:388:pipe C] min_cdclk 0 kHz <7>[ 53.530440] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:150:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 53.530530] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:269:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 53.530611] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:388:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 53.530692] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1 <7>[ 53.530803] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7>[ 53.530910] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7>[ 53.531054] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 53.531176] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A <7>[ 53.531447] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [setup_hw_state] <7>[ 53.531576] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 53.531691] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 53.531792] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 53.531895] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 53.531996] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 53.532096] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 53.532216] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64 <7>[ 53.532326] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 53.532436] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 53.532543] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 53.532641] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 53.532739] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 53.532834] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 53.532931] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 53.533027] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 53.533127] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96 <7>[ 53.533228] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 53.533330] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 53.533433] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.533528] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.533627] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 53.533727] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.533824] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 53.533922] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 53.534014] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 53.534106] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 53.534220] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 53.534321] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 53.534422] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 53.534519] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes, <7>[ 53.534612] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 40960, rem: 0, den: 1, <7>[ 53.534701] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 53.534788] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 53.534877] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 53.534968] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 53.535053] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 53.535145] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 53.535243] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 53.535338] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 53.535436] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 53.535536] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 53.535630] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 53.535722] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.535812] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.535903] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.535992] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 53.536080] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 53.536178] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.536272] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.536365] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.536460] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 53.536550] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 53.536636] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: no [setup_hw_state] <7>[ 53.536721] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:388:pipe C] enable: no [setup_hw_state] <7>[ 53.536806] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <7>[ 53.537150] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:150:pipe A][PLANE:34:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <6>[ 53.537265] xe 0000:00:02.0: [drm] Initial FB size exceeds half of stolen, discarding <7>[ 53.537267] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:34:plane 1A] on [CRTC:150:pipe A] <6>[ 53.562520] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.58.0 <7>[ 53.568711] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004551cf <7>[ 53.568836] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7>[ 53.568922] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7>[ 53.569002] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 53.569080] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cac <7>[ 53.569172] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 53.569254] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 53.569334] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 53.569412] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 53.569488] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 53.569565] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 53.569639] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 53.569707] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 53.569784] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 53.569855] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 53.569972] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7>[ 53.581418] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 53.582466] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 53.582794] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,000000fe <7>[ 53.582925] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,000000fe <7>[ 53.583047] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7>[ 53.583179] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7>[ 53.583290] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6>[ 54.222453] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6>[ 54.222456] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6>[ 54.222457] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7>[ 54.222609] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7>[ 54.222724] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6217]: allow rw access <7>[ 54.222839] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62af]: allow rw access <7>[ 54.222974] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 54.223095] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 54.223206] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 54.223344] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7>[ 54.223483] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7>[ 54.223621] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7>[ 54.223717] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 54.223816] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 54.223920] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 54.224852] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7>[ 54.224955] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7>[ 54.225073] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7>[ 54.225175] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7>[ 54.225277] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7>[ 54.225368] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7>[ 54.225457] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7>[ 54.225545] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7>[ 54.225632] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7>[ 54.225720] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7>[ 54.225811] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7>[ 54.225900] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7>[ 54.226007] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7>[ 54.226119] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7>[ 54.226228] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7>[ 54.226330] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7>[ 54.226410] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7>[ 54.226490] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7>[ 54.226569] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7>[ 54.226647] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7>[ 54.226726] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7>[ 54.226803] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7>[ 54.226879] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7>[ 54.226982] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7>[ 54.227080] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7>[ 54.227178] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7>[ 54.227292] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7>[ 54.227383] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7>[ 54.227468] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7>[ 54.227552] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210 <7>[ 54.227633] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8 <7>[ 54.227713] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc <7>[ 54.227792] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01 <7>[ 54.227871] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c <7>[ 54.227976] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7>[ 54.228082] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7>[ 54.228184] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7>[ 54.228285] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7>[ 54.228365] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7>[ 54.228449] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7>[ 54.228532] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7>[ 54.228615] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7>[ 54.228922] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7>[ 54.229037] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7>[ 54.229141] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7>[ 54.229244] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7>[ 54.229561] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7>[ 54.229639] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7>[ 54.229714] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7>[ 54.229792] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7>[ 54.230072] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7>[ 54.230186] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7>[ 54.230283] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7>[ 54.230356] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7>[ 54.230429] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7>[ 54.230503] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7>[ 54.230578] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7>[ 54.231068] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7>[ 54.231236] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004551cf <7>[ 54.231329] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7>[ 54.231409] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7>[ 54.231487] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 54.231562] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cac <7>[ 54.231637] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 54.231711] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 54.231784] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 54.231856] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 54.231944] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 54.232041] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 54.232136] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 54.232228] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 54.232301] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 54.232394] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7>[ 54.232588] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7>[ 54.233823] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0x1708000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 54.236956] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7>[ 54.253825] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 49152) <7>[ 54.264742] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 54.265152] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 54.266550] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4144 dwords <7>[ 54.266760] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7>[ 54.266928] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7>[ 54.267073] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7>[ 54.267214] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7>[ 54.267356] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7>[ 54.267495] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7>[ 54.267634] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7>[ 54.267778] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000 (MCR) <7>[ 54.272580] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7>[ 54.272846] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606 <7>[ 54.273120] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7>[ 54.277450] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7>[ 54.277609] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6>[ 54.283448] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.58.0 <7>[ 54.292185] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x017e71cf <7>[ 54.292390] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 54.292563] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7>[ 54.292729] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 54.292899] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000043d0 <7>[ 54.293046] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 54.293190] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 54.293327] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 54.293460] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 54.293588] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 54.293714] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 54.293838] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 54.293979] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 54.294102] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6>[ 54.295634] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6>[ 54.297859] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6>[ 54.298969] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7>[ 54.299104] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 54.299246] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7>[ 54.320042] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 54.320633] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 54.321030] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000,00000000 <7>[ 54.321351] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000,00000000 <7>[ 54.321657] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7>[ 54.321991] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7>[ 54.322282] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6>[ 54.322575] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6>[ 54.322579] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6>[ 54.322583] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6>[ 54.322586] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6>[ 54.322589] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6>[ 54.322592] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6>[ 54.322595] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6>[ 54.322597] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6>[ 54.322601] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6>[ 54.322604] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7>[ 54.322950] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7>[ 54.323315] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7>[ 54.323694] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7>[ 54.324127] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7>[ 54.324500] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7>[ 54.324822] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7>[ 54.325175] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7>[ 54.325489] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7>[ 54.325772] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7>[ 54.326070] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7>[ 54.326531] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7>[ 54.326776] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7>[ 54.327035] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7>[ 54.327265] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7>[ 54.327484] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7>[ 54.327690] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7>[ 54.327903] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7>[ 54.328105] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7>[ 54.328293] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7>[ 54.328482] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7>[ 54.328723] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7>[ 54.330194] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7>[ 54.330358] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7>[ 54.330520] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7>[ 54.330672] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7>[ 54.330822] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7>[ 54.330981] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7>[ 54.331121] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7>[ 54.331255] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xc50c] = 0x00010002 <7>[ 54.331387] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7>[ 54.331510] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7>[ 54.331633] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7>[ 54.331761] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7>[ 54.331897] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7>[ 54.332024] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7>[ 54.332146] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7>[ 54.332264] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7>[ 54.332377] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7>[ 54.332488] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7>[ 54.332598] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7>[ 54.332705] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7>[ 54.332806] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7>[ 54.332911] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7>[ 54.333009] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7>[ 54.333103] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7>[ 54.333195] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7>[ 54.333285] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7>[ 54.333373] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7>[ 54.333463] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7>[ 54.333549] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7>[ 54.333636] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7>[ 54.333740] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7>[ 54.333842] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7>[ 54.333951] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7>[ 54.334046] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7>[ 54.334139] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7>[ 54.334228] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7>[ 54.334311] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7>[ 54.334395] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7>[ 54.334475] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7>[ 54.334554] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7>[ 54.334633] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7>[ 54.335128] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7>[ 54.335218] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7>[ 54.335303] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7>[ 54.335386] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7>[ 54.335464] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7>[ 54.335541] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7>[ 54.335619] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7>[ 54.335696] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7>[ 54.335770] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7>[ 54.335844] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7>[ 54.335931] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7>[ 54.336013] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7>[ 54.336481] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7>[ 54.336556] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7>[ 54.336631] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7>[ 54.337235] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7>[ 54.337367] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x017e71cf <7>[ 54.337450] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 54.337529] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7>[ 54.337607] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 54.337684] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000043d0 <7>[ 54.337758] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 54.337830] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 54.337914] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 54.337993] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 54.338069] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 54.338145] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 54.338216] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 54.338284] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 54.338351] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7>[ 54.338437] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7>[ 54.338547] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7>[ 54.340287] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x2c63000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 54.359651] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 49152) <7>[ 54.381018] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 54.381521] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 54.383755] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7>[ 54.384018] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 54.387903] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7>[ 54.388157] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 54.392166] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7>[ 54.392524] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 54.437412] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7>[ 54.438466] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 54.438859] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 54.439171] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 54.439449] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 54.440549] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7>[ 54.440811] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7>[ 54.441067] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7>[ 54.442898] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 0: start 0x90008 <7>[ 54.443335] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 1: start 0x90108 <7>[ 54.443693] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 2: start 0x90208 <7>[ 54.444020] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 3: start 0x90308 <7>[ 54.444310] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 4: start 0x903c8 <7>[ 54.444581] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 0: start 0x98008 <7>[ 54.444826] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 1: start 0x98108 <7>[ 54.445077] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 2: start 0x98208 <7>[ 54.445313] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 3: start 0x98308 <7>[ 54.445546] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 4: start 0x983c8 <7>[ 54.445779] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 0: start 0x52008 <7>[ 54.446037] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 1: start 0x52108 <7>[ 54.446288] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 2: start 0x52208 <7>[ 54.446529] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 3: start 0x52308 <7>[ 54.446759] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 4: start 0x523c8 <7>[ 54.447603] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 54.447946] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 54.448238] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7>[ 54.448543] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: no [fastset] <7>[ 54.448948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:388:pipe C] enable: no [fastset] <7>[ 54.451437] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7>[ 54.451737] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7>[ 54.467660] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe B] <7>[ 54.468205] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:388:pipe C] <7>[ 54.483817] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:392:eDP-1] adding connector to sysfs <7>[ 54.489105] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:392:eDP-1] backlight device intel_backlight registered <7>[ 54.489381] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:392:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 54.489586] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:392:eDP-1] Panel prepare <7>[ 54.490137] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 54.492326] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:392:eDP-1] generating connector hotplug event <7>[ 54.492447] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:401:DP-1] adding connector to sysfs <7>[ 54.493242] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7>[ 54.494372] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:401:DP-1] generating connector hotplug event <7>[ 54.494435] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:413:DP-2] adding connector to sysfs <7>[ 54.495199] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7>[ 54.496126] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:413:DP-2] generating connector hotplug event <7>[ 54.496179] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:421:DP-3] adding connector to sysfs <7>[ 54.496777] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 54.497602] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:421:DP-3] generating connector hotplug event <6>[ 54.497652] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7>[ 54.497722] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6>[ 54.513540] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 54.520708] input: Video Bus as /devices/pci0000:00/acpi.video_bus.0/input/input5 <7>[ 54.523265] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 54.523457] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7>[ 54.524344] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 54.524353] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 54.526309] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:34:plane 1A] no fb, skipping <7>[ 54.526464] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:269:pipe B] not active, skipping <7>[ 54.526568] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:388:pipe C] not active, skipping <7>[ 54.526659] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7>[ 54.527112] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 54.527562] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:392:eDP-1] <7>[ 54.527575] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:392:eDP-1] <7>[ 54.528808] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 54.529472] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 54.529666] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 54.529805] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 54.530374] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 54.530385] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.530388] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.530390] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 54.530393] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 54.530397] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.530399] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] ELD monitor <5>[ 54.530406] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.530408] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] ELD size 20, SAD count 0 <5>[ 54.530411] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.530457] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:392:eDP-1] VRR capable: yes <7>[ 54.530584] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:392:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 54.530690] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:392:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 54.531436] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:392:eDP-1] status updated from unknown to connected <5>[ 54.531688] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.531692] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.531694] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.531776] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:392:eDP-1] probed modes: <7>[ 54.531785] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.531789] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.531794] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:401:DP-1] <7>[ 54.531799] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:401:DP-1] <7>[ 54.532018] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.532183] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:401:DP-1] status updated from unknown to disconnected <7>[ 54.532190] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:401:DP-1] disconnected <7>[ 54.532195] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:413:DP-2] <7>[ 54.532199] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:413:DP-2] <7>[ 54.532350] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.532481] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:413:DP-2] status updated from unknown to disconnected <7>[ 54.532486] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:413:DP-2] disconnected <7>[ 54.532489] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:421:DP-3] <7>[ 54.532493] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:421:DP-3] <7>[ 54.532634] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.532751] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:421:DP-3] status updated from unknown to disconnected <7>[ 54.532755] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:421:DP-3] disconnected <7>[ 54.532759] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:392:eDP-1] enabled? yes <7>[ 54.532763] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:401:DP-1] enabled? no <7>[ 54.532765] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:413:DP-2] enabled? no <7>[ 54.532767] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:421:DP-3] enabled? no <7>[ 54.533030] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 54.533064] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:392:eDP-1] found preferred mode: 2880x1800 <7>[ 54.533067] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 54.533251] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0) <7>[ 54.533567] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6>[ 54.533564] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7>[ 54.533587] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <6>[ 54.533717] xe 0000:00:02.0: [drm] Allocating fbdev: Stolen memory not preferred. <7>[ 54.533693] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:401:DP-1] <7>[ 54.534871] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:413:DP-2] <7>[ 54.535038] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:421:DP-3] <7>[ 54.535244] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 54.536338] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 54.540078] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7>[ 54.540760] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 54.540767] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <6>[ 54.542612] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7>[ 54.542996] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7>[ 54.548166] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=192000/192000 <7>[ 54.556303] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb <6>[ 54.557504] fbcon: xedrmfb (fb0) is primary device <7>[ 54.558748] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:392:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 54.559107] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:391:DDI A/PHY A][CRTC:150:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7>[ 54.559352] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000 <7>[ 54.559532] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 54.560010] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:391:DDI A/PHY A] [CRTC:150:pipe A] <7>[ 54.560188] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288) <7>[ 54.560356] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in dpll_hw_state <7>[ 54.560524] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7>[ 54.560696] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 54.560874] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: yes, <7>[ 54.561024] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 40960, rem: 0, den: 1, <7>[ 54.561173] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 54.561321] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 54.561471] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 54.561620] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 54.561771] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 54.561940] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 54.562089] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 54.562239] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 54.562390] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7>[ 54.562540] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 54.562688] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: no, <7>[ 54.562845] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 54.562993] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 54.563141] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 54.563287] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 54.563435] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 54.563582] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 54.563728] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 54.563884] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 54.564032] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 54.564181] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000) <7>[ 54.564336] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0) <7>[ 54.564490] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7>[ 54.564640] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing DPLL 0 <7>[ 54.564850] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7>[ 54.565001] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 54.565146] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7>[ 54.565272] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7>[ 54.565397] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7>[ 54.565519] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.565641] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.565764] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.565765] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7>[ 54.565896] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.566015] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.566131] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.566245] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.566356] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.566467] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.566596] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.566728] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.566903] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.567039] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.567155] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.567262] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.567381] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.567493] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:144:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.567603] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:144:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.567719] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:144:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.568103] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:144:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.568239] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 1390840 num active planes 1 <7>[ 54.568409] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7>[ 54.568568] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7>[ 54.568710] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 54.568859] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 54.568997] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7>[ 54.569205] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated DPLL 0 <7>[ 54.569362] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving DPLL 0 <7>[ 54.569506] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset] <7>[ 54.569647] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 54.569785] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 54.569948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 54.570091] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 54.570228] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 54.570369] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 54.570507] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7>[ 54.570648] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 54.570784] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 54.570919] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 54.571047] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 54.571171] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 54.571295] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 54.571409] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7>[ 54.571512] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7>[ 54.571617] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7>[ 54.571720] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7>[ 54.571823] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7>[ 54.571947] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7>[ 54.572068] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 54.572182] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 54.572284] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7>[ 54.572385] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 54.572491] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 54.572600] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.572707] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.572822] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 54.572948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.573070] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 54.573180] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 54.573281] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 54.573381] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 54.573481] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 54.573579] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 54.573676] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 54.573774] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no, <7>[ 54.573894] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 54.574011] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 54.574124] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 54.574236] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 54.574356] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 54.574460] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 54.574562] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 54.574665] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 54.574793] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 54.574997] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 54.575175] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 54.575347] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.575515] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.575683] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.575847] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 54.575960] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 54.576072] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.576183] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.576275] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.576381] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 54.576492] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 54.576603] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:393] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 54.576725] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 54.576857] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 54.576977] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7>[ 54.577094] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7>[ 54.577210] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7>[ 54.577324] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7>[ 54.577438] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7>[ 54.578411] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 54.578611] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 54.578730] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 54.578873] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 54.579020] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 54.579155] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 54.579271] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 54.579384] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 54.579489] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 54.579593] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 54.579696] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 54.579808] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 54.579926] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 54.580057] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 54.580183] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 54.580283] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 54.580382] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 54.580480] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 54.580579] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 54.580684] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 54.580789] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 54.580928] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 54.581056] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 54.581164] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 54.581258] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 54.581353] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 54.581448] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 54.581542] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 54.581637] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 54.581733] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 54.581837] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 54.581961] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 54.582083] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 54.582183] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 54.582282] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 54.582380] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <6>[ 54.587945] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <7>[ 54.588374] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7>[ 54.588564] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <6>[ 54.590523] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 54.591783] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 54.592460] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 54.792952] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:392:eDP-1] set backlight PWM = 0 <7>[ 54.794453] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7>[ 54.805175] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turn panel power off <7>[ 54.805506] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 54.805696] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 54.805889] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 54.806163] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - short <7>[ 54.858190] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 54.858506] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - short <7>[ 54.866940] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 54.867441] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:150:pipe A] <7>[ 54.867494] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:391:DDI A/PHY A] <7>[ 54.867949] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:391:DDI A/PHY A] <7>[ 54.868553] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7>[ 54.868982] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7>[ 54.869755] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x1341b072) <7>[ 54.870060] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:391:DDI A/PHY A] <7>[ 54.870401] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:400:DDI TC1/PHY TC1] <7>[ 54.870688] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST A] <7>[ 54.871014] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST B] <7>[ 54.871297] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST C] <7>[ 54.871576] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:412:DDI TC2/PHY TC2] <7>[ 54.871854] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST A] <7>[ 54.872159] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST B] <7>[ 54.872411] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST C] <7>[ 54.872673] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:420:DDI TC3/PHY TC3] <7>[ 54.872980] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST A] <7>[ 54.873330] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST B] <7>[ 54.873599] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST C] <7>[ 54.873956] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 54.875628] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:150:pipe A] <7>[ 54.876087] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7>[ 54.878336] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turn panel power on <7>[ 54.878707] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 wait for panel power cycle (489 ms remaining) <7>[ 54.895174] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 54.895519] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - long <7>[ 54.895819] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 54.896112] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:391:DDI A/PHY A] <7>[ 54.977213] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7>[ 55.376878] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 55.427871] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 55.428255] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 55.428646] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 55.465019] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 55.465436] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - long <7>[ 55.465754] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 55.466922] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:391:DDI A/PHY A] <7>[ 55.553157] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.553158] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.553239] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.643016] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 55.643445] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turning VDD on <7>[ 55.643875] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 55.646085] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 55.647629] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 55.648751] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7>[ 55.650124] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 55.651556] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 55.652823] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 55.653258] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7>[ 55.654834] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 55.655245] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7>[ 55.656107] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7>[ 55.656879] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7>[ 55.657417] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7>[ 55.658021] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:392:eDP-1] set backlight PWM = 192000 <7>[ 55.674444] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7>[ 55.676825] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:392:eDP-1] <7>[ 55.677425] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A] <7>[ 55.679269] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 55.681115] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <6>[ 55.683688] Console: switching to colour frame buffer device 180x56 <6>[ 55.715709] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7>[ 55.715745] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7>[ 55.716304] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7>[ 55.716852] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7>[ 55.717358] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7>[ 55.717876] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7>[ 55.718295] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7>[ 55.718728] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7>[ 55.719107] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7>[ 55.719503] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7>[ 55.719862] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7>[ 55.720275] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7>[ 55.720694] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7>[ 55.721039] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7>[ 55.721380] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7>[ 55.721809] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7>[ 55.722146] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7>[ 55.722497] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7>[ 55.722860] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7>[ 55.723189] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7>[ 55.723535] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7>[ 55.723922] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7>[ 55.724293] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7>[ 55.725918] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7>[ 55.726332] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7>[ 55.726847] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7>[ 55.727253] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x80000000) <7>[ 55.727719] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7>[ 55.728137] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xa0000000) <7>[ 55.728532] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7>[ 55.728862] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa8000000) <7>[ 55.729211] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.729570] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.729940] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 55.734974] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7>[ 55.740338] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 55.740369] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 55.740981] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:392:eDP-1] <7>[ 55.740999] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:392:eDP-1] <7>[ 55.741710] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 55.742130] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 55.742300] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.742451] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.742818] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 55.742830] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.742834] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.742836] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 55.742842] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 55.742848] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.742851] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] ELD monitor <5>[ 55.742866] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.742869] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] ELD size 20, SAD count 0 <5>[ 55.742875] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.742922] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:392:eDP-1] VRR capable: yes <7>[ 55.743113] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:392:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 55.743304] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:392:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5>[ 55.743939] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.743943] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.743945] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.744056] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:392:eDP-1] probed modes: <7>[ 55.744070] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 55.744076] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 55.744082] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:401:DP-1] <7>[ 55.744088] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:401:DP-1] <7>[ 55.744301] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.744506] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:401:DP-1] disconnected <7>[ 55.744513] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:413:DP-2] <7>[ 55.744517] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:413:DP-2] <7>[ 55.744725] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.744880] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:413:DP-2] disconnected <7>[ 55.744887] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:421:DP-3] <7>[ 55.744892] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:421:DP-3] <7>[ 55.745095] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.745255] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:421:DP-3] disconnected <7>[ 55.745261] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:392:eDP-1] enabled? yes <7>[ 55.745268] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:401:DP-1] enabled? no <7>[ 55.745272] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:413:DP-2] enabled? no <7>[ 55.745275] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:421:DP-3] enabled? no <7>[ 55.745652] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 55.745719] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:392:eDP-1] found preferred mode: 2880x1800 <7>[ 55.745724] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 55.745802] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0) <7>[ 55.748955] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 55.749231] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 55.757864] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 55.792178] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.792767] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.793219] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 55.812529] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 55.813046] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 55.826361] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 55.826852] [IGT] xe_module_load: finished subtest load, SUCCESS <7>[ 55.827620] [IGT] xe_module_load: exiting, ret=0 <7>[ 55.841486] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.841799] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.841982] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 55.844249] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 56.769580] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.769699] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.769816] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 58.304727] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turning VDD off <7>[ 58.305139] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067