Result:
i915_display_info18 igt_runner18 results18.json results18-xe-load.json guc_logs18.tar boot18 dmesg18
| Detail | Value |
|---|---|
| Duration | 4.50 seconds |
| Hostname |
shard-bmg-2 |
| Igt-Version |
IGT-Version: 2.3-g4c8773922 (x86_64) (Linux: 7.0.0-rc3-lgci-xe-xe-4710-29044d219ec917388-debug+ x86_64) |
| Out |
Using IGT_SRANDOM=1773456476 for randomisation Opened device: /dev/dri/card0 Starting subtest: plane-downscale-factor-0-5-with-pixel-format Starting dynamic subtest: pipe-A Trying on DP-2 Dynamic subtest pipe-A: SUCCESS (1.904s) Starting dynamic subtest: pipe-B Trying on DP-2 Dynamic subtest pipe-B: SUCCESS (1.945s) Starting dynamic subtest: pipe-C Trying on DP-2 Dynamic subtest pipe-C: SUCCESS (0.328s) Starting dynamic subtest: pipe-D Trying on DP-2 Dynamic subtest pipe-D: SUCCESS (0.313s) Subtest plane-downscale-factor-0-5-with-pixel-format: SUCCESS (4.502s) |
| Err |
Starting subtest: plane-downscale-factor-0-5-with-pixel-format Starting dynamic subtest: pipe-A Dynamic subtest pipe-A: SUCCESS (1.904s) Starting dynamic subtest: pipe-B Dynamic subtest pipe-B: SUCCESS (1.945s) Starting dynamic subtest: pipe-C Dynamic subtest pipe-C: SUCCESS (0.328s) Starting dynamic subtest: pipe-D Dynamic subtest pipe-D: SUCCESS (0.313s) Subtest plane-downscale-factor-0-5-with-pixel-format: SUCCESS (4.502s) |
| Dmesg |
<6> [107.060183] Console: switching to colour dummy device 80x25
<6> [107.060405] [IGT] kms_plane_scaling: executing
<7> [107.074055] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-1]
<7> [107.074062] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]
<7> [107.078352] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-1] disconnected
<7> [107.078653] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-1]
<7> [107.078655] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]
<7> [107.082865] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-1] disconnected
<7> [107.083324] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-2]
<7> [107.083327] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]
<7> [107.083791] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [107.083883] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [107.084327] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [107.084444] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [107.084448] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [107.084544] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [107.085910] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [107.085913] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [107.086008] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-2] disconnected
<7> [107.086462] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]
<7> [107.086466] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]
<7> [107.090742] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected
<7> [107.091027] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-4]
<7> [107.091030] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]
<7> [107.095319] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-4] disconnected
<7> [107.095735] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-1]
<7> [107.095738] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]
<7> [107.100083] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-1] disconnected
<7> [107.100103] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-1]
<7> [107.100107] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]
<7> [107.104310] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-1] disconnected
<7> [107.104324] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2]
<7> [107.104331] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]
<7> [107.104473] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [107.107892] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01
<7> [107.115169] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [107.116442] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01
<7> [107.117425] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.38 quirks 0x0000
<7> [107.120029] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11
<7> [107.120947] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST
<7> [107.127044] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [107.127369] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000
<7> [107.127504] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000
<7> [107.134672] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [107.136548] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [107.138506] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [107.140576] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [107.142583] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [107.144512] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [107.146779] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [107.148757] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [107.153076] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [107.155148] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [107.157238] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [107.159294] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [107.161393] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [107.163472] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [107.165463] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [107.167537] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [107.169254] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz
<7> [107.169274] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.
<7> [107.169284] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.
<7> [107.169291] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.
<7> [107.169298] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.
<7> [107.169306] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.
<7> [107.169316] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435
<7> [107.169325] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
<7> [107.169334] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3
<7> [107.169377] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no
<7> [107.169719] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps
<7> [107.170871] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [107.171154] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [107.173166] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "2880x1800": 60 390000 2880 3056 3400 3440 1800 1808 1818 1890 0x40 0x5 (CLOCK_HIGH)
<7> [107.173173] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)
<7> [107.173178] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)
<7> [107.173183] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "720x576i": 50 13500 720 732 795 864 576 580 586 625 0x40 0x101a (NO_INTERLACE)
<7> [107.173187] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005 (NO_STEREO)
<7> [107.173193] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x4005 (NO_STEREO)
<7> [107.173197] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE)
<7> [107.173201] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x1c005 (NO_STEREO)
<7> [107.173205] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x4005 (NO_STEREO)
<7> [107.173210] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE)
<7> [107.173214] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005 (NO_STEREO)
<7> [107.173218] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005 (NO_STEREO)
<7> [107.173223] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "3840x2160": 50 594000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5 (NO_420)
<7> [107.173227] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 (NO_420)
<7> [107.173231] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "4096x2160": 50 594000 4096 5064 5152 5280 2160 2168 2178 2250 0x40 0x5 (NO_420)
<7> [107.173236] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 (NO_420)
<7> [107.173240] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)
<7> [107.173244] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005 (NO_STEREO)
<7> [107.173249] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x4005 (NO_STEREO)
<7> [107.173253] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE)
<7> [107.173257] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005 (NO_STEREO)
<7> [107.173261] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005 (NO_STEREO)
<7> [107.173266] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 (NO_420)
<7> [107.173270] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 (NO_420)
<7> [107.173277] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2] probed modes:
<7> [107.173279] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [107.173282] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5
<7> [107.173284] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5
<7> [107.173286] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 24 297000 4096 5116 5204 5500 2160 2168 2178 2250 0x40 0x5
<7> [107.173288] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 24 296703 4096 5116 5204 5500 2160 2168 2178 2250 0x40 0x5
<7> [107.173291] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5
<7> [107.173293] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5
<7> [107.173295] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5
<7> [107.173297] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5
<7> [107.173300] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5
<7> [107.173302] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x40 0x5
<7> [107.173304] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2224x1668": 60 245000 2224 2270 2302 2382 1668 1671 1677 1714 0x40 0x5
<7> [107.173307] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1449 1481 0x40 0x5
<7> [107.173309] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9
<7> [107.173311] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [107.173314] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [107.173316] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [107.173318] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [107.173320] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
<7> [107.173323] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [107.173325] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [107.173327] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 25 74250 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
<7> [107.173329] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<7> [107.173332] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<7> [107.173334] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
<7> [107.173336] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [107.173338] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [107.173341] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [107.173343] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [107.173345] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 85500 1366 1436 1579 1792 768 771 774 798 0x40 0x5
<7> [107.173348] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [107.173350] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [107.173352] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [107.173354] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
<7> [107.173356] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [107.173359] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [107.173361] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x576": 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
<7> [107.173363] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<7> [107.173366] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<7> [107.173368] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<7> [107.173370] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [107.173401] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-2]
<7> [107.173405] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]
<7> [107.173870] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [107.173956] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [107.174389] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [107.174475] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [107.174478] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [107.174564] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [107.175904] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [107.175907] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [107.175991] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-2] disconnected
<7> [107.176004] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-3]
<7> [107.176009] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]
<7> [107.201222] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz
<7> [107.201225] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.
<7> [107.201228] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.
<7> [107.201230] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48.
<7> [107.201232] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.
<7> [107.201235] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.
<7> [107.201237] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV
<7> [107.201240] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
<7> [107.201243] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3
<7> [107.201616] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [107.201698] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [107.202127] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [107.202206] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [107.202673] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)
<7> [107.202679] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)
<7> [107.202684] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "720x576i": 50 13500 720 732 795 864 576 580 586 625 0x40 0x101a (NO_INTERLACE)
<7> [107.202688] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE)
<7> [107.202693] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE)
<7> [107.202697] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)
<7> [107.202702] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE)
<7> [107.202709] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-3] probed modes:
<7> [107.202711] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [107.202714] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5
<7> [107.202716] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5
<7> [107.202718] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 50 594000 4096 5064 5152 5280 2160 2168 2178 2250 0x40 0x5
<7> [107.202721] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5
<7> [107.202723] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5
<7> [107.202725] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 24 297000 4096 5116 5204 5500 2160 2168 2178 2250 0x40 0x5
<7> [107.202727] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 24 296703 4096 5116 5204 5500 2160 2168 2178 2250 0x40 0x5
<7> [107.202730] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5
<7> [107.202732] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5
<7> [107.202734] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 50 594000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5
<7> [107.202736] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5
<7> [107.202738] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5
<7> [107.202741] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5
<7> [107.202743] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5
<7> [107.202745] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5
<7> [107.202748] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 30 167000 2880 2910 2920 3030 1800 1820 1828 1836 0x40 0x5
<7> [107.202750] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x40 0x5
<7> [107.202752] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1449 1481 0x40 0x5
<7> [107.202754] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9
<7> [107.202756] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [107.202759] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [107.202761] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [107.202763] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [107.202766] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
<7> [107.202768] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [107.202770] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [107.202772] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 25 74250 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
<7> [107.202774] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<7> [107.202777] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005
<7> [107.202779] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005
<7> [107.202781] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<7> [107.202784] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005
<7> [107.202786] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005
<7> [107.202788] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
<7> [107.202790] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [107.202793] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [107.202795] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [107.202797] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [107.202799] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 85500 1366 1436 1579 1792 768 771 774 798 0x40 0x5
<7> [107.202802] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [107.202804] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [107.202806] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005
<7> [107.202808] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x4005
<7> [107.202811] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [107.202813] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005
<7> [107.202815] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x4005
<7> [107.202817] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
<7> [107.202820] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x1c005
<7> [107.202822] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x4005
<7> [107.202824] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [107.202826] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [107.202829] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x576": 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
<7> [107.202831] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<7> [107.202833] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<7> [107.202835] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<7> [107.202837] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [107.202867] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]
<7> [107.202870] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]
<7> [107.207444] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected
<7> [107.207457] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-4]
<7> [107.207460] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]
<7> [107.211616] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-4] disconnected
<6> [107.211883] [IGT] kms_plane_scaling: starting subtest plane-downscale-factor-0-5-with-pixel-format
<6> [107.212255] [IGT] kms_plane_scaling: starting dynamic subtest pipe-A
<7> [107.215588] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [107.216056] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [107.216157] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [107.216594] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [107.216678] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [107.216760] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [107.219556] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [107.220008] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [107.220151] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [107.220587] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [107.220669] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [107.220749] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [107.223539] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [107.224006] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [107.224096] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [107.224524] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [107.224604] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [107.224688] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [107.225593] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:559]
<7> [107.226384] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.enable (expected yes, found no)
<7> [107.226490] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected yes, found no)
<7> [107.226589] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in cpu_transcoder (expected 1, found -1)
<7> [107.226686] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in lane_count (expected 4, found 0)
<7> [107.226780] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)
<7> [107.226873] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [107.226964] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)
<7> [107.227056] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2200, found 0)
<7> [107.227156] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)
<7> [107.227248] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2200, found 0)
<7> [107.227338] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)
<7> [107.227427] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2052, found 0)
<7> [107.227516] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)
<7> [107.227604] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)
<7> [107.227692] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)
<7> [107.227782] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)
<7> [107.227869] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)
<7> [107.227958] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)
<7> [107.228045] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)
<7> [107.228174] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2200, found 0)
<7> [107.228269] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)
<7> [107.228360] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2200, found 0)
<7> [107.228448] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)
<7> [107.228536] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2052, found 0)
<7> [107.228624] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)
<7> [107.228712] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)
<7> [107.228799] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)
<7> [107.228887] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)
<7> [107.228974] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)
<7> [107.229061] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)
<7> [107.229157] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [107.229244] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)
<7> [107.229330] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)
<7> [107.229416] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in has_hdmi_sink (expected yes, found no)
<7> [107.229503] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in has_infoframe (expected yes, found no)
<7> [107.229589] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pipe_bpp (expected 36, found 0)
<7> [107.229678] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 148500, found 0)
<7> [107.229762] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 148500, found 0)
<7> [107.229846] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in port_clock (expected 222750, found 0)
<7> [107.229931] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in infoframes.enable (expected 0x00000071, found 0x00000000)
<7> [107.230015] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in infoframes.gcp (expected 0x00000006, found 0x00000000)
<7> [107.230105] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in avi infoframe
<7> [107.230192] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [107.230278] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13
<7> [107.230280] xe 0000:03:00.0: colorspace: RGB
<7> [107.230281] xe 0000:03:00.0: scan mode: Underscan
<7> [107.230282] xe 0000:03:00.0: colorimetry: No Data
<7> [107.230283] xe 0000:03:00.0: picture aspect: 16:9
<7> [107.230285] xe 0000:03:00.0: active aspect: Same as Picture
<7> [107.230286] xe 0000:03:00.0: itc: No Data
<7> [107.230287] xe 0000:03:00.0: extended colorimetry: xvYCC 601
<7> [107.230288] xe 0000:03:00.0: quantization range: Default
<7> [107.230289] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling
<7> [107.230290] xe 0000:03:00.0: video code: 16
<7> [107.230292] xe 0000:03:00.0: ycc quantization range: Full
<7> [107.230293] xe 0000:03:00.0: hdmi content type: Graphics
<7> [107.230294] xe 0000:03:00.0: pixel repeat: 0
<7> [107.230295] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0
<7> [107.230297] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [107.230383] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in spd infoframe
<7> [107.230470] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [107.230555] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25
<7> [107.230557] xe 0000:03:00.0: vendor: Intel
<7> [107.230558] xe 0000:03:00.0: product: Discrete gfx
<7> [107.230559] xe 0000:03:00.0: source device information: PC General (0x9)
<7> [107.230560] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [107.230646] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hdmi infoframe
<7> [107.230733] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [107.230818] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4
<7> [107.230820] xe 0000:03:00.0: empty frame
<7> [107.230821] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [107.230907] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset
<7> [107.230995] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3
<7> [107.231099] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: staged scaling request for 1920x1080->960x540 scaler_users = 0x1
<7> [107.231208] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [107.231283] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x1
<7> [107.231354] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xc -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x1
<7> [107.231427] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 1989) -> ( 0 - 4037), size 1989 -> 4037
<7> [107.231494] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb (1989 - 2048) -> (4037 - 4096), size 59 -> 59
<7> [107.231561] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.231627] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.231693] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [107.231759] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [107.231827] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0
<7> [107.231892] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0
<7> [107.231956] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [107.232020] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.232089] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.232155] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.232239] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 1188000 num active planes 1
<7> [107.232339] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [107.232435] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [107.232530] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [107.232623] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [107.232716] xe 0000:03:00.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:150:pipe A] min cdclk: 192000 kHz -> 297000 kHz
<7> [107.232811] xe 0000:03:00.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:268:pipe B] min cdclk: 192000 kHz -> 0 kHz
<7> [107.232930] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:34
<7> [107.233007] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [modeset]
<7> [107.233107] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [NOFB], visible: no
<7> [107.233202] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no
<7> [107.233293] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no
<7> [107.233384] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no
<7> [107.233474] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no
<7> [107.233564] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no
<7> [107.234698] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:538:HDMI-A-3][ENCODER:537:DDI TC3/PHY H] Disable audio codec on [CRTC:268:pipe B]
<7> [107.253071] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [107.253675] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe B
<7> [107.275106] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x2, on? 1) for [CRTC:268:pipe B]
<7> [107.277263] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3
<7> [107.277383] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7> [107.277877] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F]
<7> [107.278186] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A]
<7> [107.278481] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B]
<7> [107.278747] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C]
<7> [107.279013] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D]
<7> [107.279312] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G]
<7> [107.279560] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A]
<7> [107.279791] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B]
<7> [107.280020] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C]
<7> [107.280271] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D]
<7> [107.280488] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H]
<7> [107.280905] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I]
<7> [107.281123] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A]
<7> [107.281327] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B]
<7> [107.281538] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C]
<7> [107.281746] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D]
<7> [107.281944] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:507:DP-1]
<7> [107.282204] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:520:HDMI-A-1]
<7> [107.282604] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:534:HDMI-A-2]
<7> [107.282807] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:538:HDMI-A-3]
<7> [107.283199] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:542:DP-3]
<7> [107.283370] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:550:HDMI-A-4]
<7> [107.285319] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7> [107.285658] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)
<7> [107.299517] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [107.300320] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa8000000)
<7> [107.301102] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]
<7> [107.301789] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03071 0x28d10e72)
<7> [107.302748] xe 0000:03:00.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe A
<7> [107.303736] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:559] from all active usage due to RMFB ioctl
<7> [107.303817] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:559] is removed
<7> [107.303868] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [107.304211] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [107.304454] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [107.304696] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.304931] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.305169] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.305410] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [107.305723] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [107.306014] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [107.306310] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [107.317117] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [107.317360] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: staged scaling request for 1920x1080->960x540 scaler_users = 0x1
<7> [107.317728] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [107.318015] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.318341] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.318609] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [107.318866] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [107.319193] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [107.319651] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: staged scaling request for 1920x1080->960x540 scaler_users = 0x1
<7> [107.319919] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [107.320175] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.320385] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.320596] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [107.320805] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [107.321028] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [107.321450] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: staged scaling request for 1920x1080->960x540 scaler_users = 0x1
<7> [107.321675] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [107.321865] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.322044] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.322264] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [107.322452] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [107.322636] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [107.322890] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [107.323145] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [107.323375] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [107.323656] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 37125 kHz
<7> [107.323885] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:34
<7> [107.331118] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [107.332449] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [107.332480] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:556] is removed
<7> [107.332498] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [107.332609] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [107.332691] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [107.332771] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.332852] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.332934] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.333027] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [107.333164] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [107.333286] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [107.333409] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [107.350229] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [107.350451] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: staged scaling request for 1920x1080->960x540 scaler_users = 0x1
<7> [107.350781] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [107.351049] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.351381] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.351845] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [107.352390] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [107.352863] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [107.353509] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [107.353837] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [107.354137] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [107.354459] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:34
<7> [107.366097] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [107.366183] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:556] is removed
<7> [107.366230] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [107.366558] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [107.366834] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [107.367122] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.367379] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.367633] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.367930] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [107.368370] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [107.368707] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [107.369033] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [107.385194] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [107.385553] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: staged scaling request for 1920x1080->960x540 scaler_users = 0x1
<7> [107.385996] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [107.386434] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.386789] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.387134] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782
<7> [107.387427] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946
<7> [107.387759] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 4752000 num active planes 1
<7> [107.388179] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 4990 qgv_peak_bw: 48000
<7> [107.388544] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 4990 qgv_peak_bw: 48000
<7> [107.388903] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 4990
<7> [107.389355] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 37125 kHz -> 74250 kHz
<7> [107.389682] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:34
<7> [107.399491] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [107.399563] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:556] is removed
<7> [107.399606] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [107.399894] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [107.400199] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [107.400439] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.400674] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.400907] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.401183] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [107.401493] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [107.401793] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [107.402087] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [107.423763] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [107.424128] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: staged scaling request for 1920x1080->960x540 scaler_users = 0x1
<7> [107.424656] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [107.425061] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.425510] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.425889] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [107.426299] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [107.426709] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 1188000 num active planes 1
<7> [107.427238] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [107.427682] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [107.428117] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [107.428575] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:34
<7> [107.432367] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [107.432436] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:556] is removed
<7> [107.432475] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [107.432728] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [107.432939] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [107.433157] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.433359] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.433543] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.433742] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [107.433990] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [107.434250] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [107.434472] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [107.453505] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [107.453811] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: staged scaling request for 1920x1080->960x540 scaler_users = 0x1
<7> [107.454357] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:34:plane 1A] using Y plane [PLANE:124:plane 4A]
<7> [107.454865] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 1472), size 0 -> 1472
<7> [107.455304] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 0) -> (1472 - 4037), size 0 -> 2565
<7> [107.455644] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.455975] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.456358] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300
<7> [107.456674] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316
<7> [107.456960] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.457273] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.457542] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300
<7> [107.457810] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316
<7> [107.458110] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 1782000 num active planes 2
<7> [107.458487] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1872 qgv_peak_bw: 48000
<7> [107.458840] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1872 qgv_peak_bw: 48000
<7> [107.459167] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1872
<7> [107.459548] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:34
<7> [107.465738] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [107.465782] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:556] is removed
<7> [107.465810] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [107.465942] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 1472) -> ( 0 - 0), size 1472 -> 0
<7> [107.466047] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb (1472 - 4037) -> ( 0 - 0), size 2565 -> 0
<7> [107.466170] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [107.466271] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.466369] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.466465] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.466562] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [107.466652] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.466741] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.466831] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.466931] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [107.467061] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [107.467197] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [107.467316] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [107.488341] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [107.488635] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: staged scaling request for 1920x1080->960x540 scaler_users = 0x1
<7> [107.489065] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:34:plane 1A] using Y plane [PLANE:124:plane 4A]
<7> [107.489610] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 1571), size 0 -> 1571
<7> [107.489961] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 0) -> (1571 - 4037), size 0 -> 2466
<7> [107.490372] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.490709] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.491060] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [107.491479] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [107.491828] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.492249] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.492598] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [107.492955] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [107.493415] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 3564000 num active planes 2
<7> [107.493846] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 3743 qgv_peak_bw: 48000
<7> [107.494275] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 3743 qgv_peak_bw: 48000
<7> [107.494639] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 3743
<7> [107.495086] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:34
<7> [107.498933] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [107.499009] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:556] is removed
<7> [107.499056] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [107.499366] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 1571) -> ( 0 - 0), size 1571 -> 0
<7> [107.499559] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb (1571 - 4037) -> ( 0 - 0), size 2466 -> 0
<7> [107.499735] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [107.499904] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.500064] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.500247] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.500398] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [107.500539] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.500681] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.500824] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.500988] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [107.501212] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [107.501411] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [107.501594] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [107.522553] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [107.522817] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: staged scaling request for 1920x1080->960x540 scaler_users = 0x1
<7> [107.523250] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [107.523548] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.523838] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.524135] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [107.524394] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [107.524693] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [107.525053] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [107.525436] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [107.525745] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [107.526127] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:34
<7> [107.532685] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [107.532743] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:556] is removed
<7> [107.532774] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [107.533004] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [107.533248] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [107.533434] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.533620] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.533804] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.534000] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [107.534271] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [107.534507] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [107.534725] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [107.559151] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [107.559492] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: staged scaling request for 1920x1080->960x540 scaler_users = 0x1
<7> [107.560048] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [107.560545] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.560905] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.561256] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [107.561554] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [107.561893] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [107.562430] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: staged scaling request for 1920x1080->960x540 scaler_users = 0x1
<7> [107.562724] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [107.562970] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.563227] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.563453] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [107.563674] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [107.563899] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [107.564299] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: staged scaling request for 1920x1080->960x540 scaler_users = 0x1
<7> [107.564550] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [107.564749] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.564942] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.565150] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [107.565325] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [107.565503] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [107.565761] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [107.566004] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [107.566245] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [107.566500] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:34
<7> [107.583019] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [107.583129] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:556] is removed
<7> [107.583178] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [107.583526] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [107.583789] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [107.584019] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.584286] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.584505] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.584745] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [107.585045] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [107.585373] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [107.585651] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [107.609585] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [107.609910] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: staged scaling request for 1920x1080->960x540 scaler_users = 0x1
<7> [107.610513] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [107.610943] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.611402] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.611772] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [107.612109] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [107.612465] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [107.613032] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: staged scaling request for 1920x1080->960x540 scaler_users = 0x1
<7> [107.613450] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [107.613744] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.613997] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.614287] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [107.614517] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [107.614754] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [107.615188] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: staged scaling request for 1920x1080->960x540 scaler_users = 0x1
<7> [107.615456] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [107.615682] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.615893] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.616106] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [107.616289] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [107.616487] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [107.616758] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [107.617001] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [107.617283] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [107.617555] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:34
<7> [107.632708] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [107.632765] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:556] is removed
<7> [107.632796] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [107.633022] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [107.633259] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [107.633447] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.633637] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.633834] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.634051] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [107.634362] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [107.634609] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [107.634854] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [107.666590] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [107.666792] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: staged scaling request for 1920x1080->960x540 scaler_users = 0x1
<7> [107.667111] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [107.667330] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.667524] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.667706] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782
<7> [107.667880] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946
<7> [107.668065] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 4752000 num active planes 1
<7> [107.668338] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 4990 qgv_peak_bw: 48000
<7> [107.668563] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 4990 qgv_peak_bw: 48000
<7> [107.668782] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 4990
<7> [107.669023] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:34
<7> [107.683232] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [107.683343] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:556] is removed
<7> [107.683405] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [107.683886] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [107.684302] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [107.684619] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.684927] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.685257] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.685568] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [107.685975] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [107.686365] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [107.686710] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [107.701171] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [107.701570] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: staged scaling request for 1920x1080->960x540 scaler_users = 0x2
<7> [107.702173] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [107.702603] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.703005] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.703471] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [107.703856] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [107.704321] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 1188000 num active planes 1
<7> [107.704861] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [107.705359] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [107.705825] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [107.706403] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:64
<7> [107.716474] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [107.716563] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:64:plane 2A] because [FB:556] is removed
<7> [107.716613] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [107.717004] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [107.717387] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [107.717685] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.717975] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.718284] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.718597] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [107.718990] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [107.719375] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [107.719706] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [107.734143] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [107.734443] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: staged scaling request for 1920x1080->960x540 scaler_users = 0x2
<7> [107.734960] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [107.735413] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.735780] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.736152] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [107.736489] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [107.736868] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [107.737364] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [107.737791] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [107.738210] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [107.738663] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:64
<7> [107.749818] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [107.749915] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:64:plane 2A] because [FB:556] is removed
<7> [107.749967] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [107.750427] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [107.750742] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [107.751037] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.751406] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.751688] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.751999] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [107.752413] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [107.752755] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [107.753088] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [107.767404] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [107.767705] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: staged scaling request for 1920x1080->960x540 scaler_users = 0x2
<7> [107.768263] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [107.768650] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.769004] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.769407] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [107.769751] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [107.770114] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [107.770561] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [107.770979] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [107.771395] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [107.771851] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:64
<7> [107.783143] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [107.783241] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:64:plane 2A] because [FB:556] is removed
<7> [107.783293] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [107.783700] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [107.784024] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [107.784397] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.784705] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.785007] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.785413] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [107.785860] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [107.786294] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [107.786678] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [107.800878] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [107.801188] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: staged scaling request for 1920x1080->960x540 scaler_users = 0x2
<7> [107.801723] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [107.802115] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.802468] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.802815] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782
<7> [107.803166] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946
<7> [107.803510] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 4752000 num active planes 1
<7> [107.803947] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 4990 qgv_peak_bw: 48000
<7> [107.804358] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 4990 qgv_peak_bw: 48000
<7> [107.804733] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 4990
<7> [107.805193] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:64
<7> [107.816487] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [107.816577] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:64:plane 2A] because [FB:556] is removed
<7> [107.816625] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [107.817023] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [107.817391] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [107.817676] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.817951] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.818258] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.818560] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [107.818948] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [107.819339] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [107.819687] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [107.838586] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [107.838929] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: staged scaling request for 1920x1080->960x540 scaler_users = 0x2
<7> [107.839573] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [107.840008] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.840470] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.840857] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [107.841280] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [107.841714] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 1188000 num active planes 1
<7> [107.842346] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [107.842858] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [107.843319] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [107.843827] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:64
<7> [107.849092] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [107.849152] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:64:plane 2A] because [FB:556] is removed
<7> [107.849187] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [107.849452] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [107.849640] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [107.849815] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.849981] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.850165] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.850347] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [107.850568] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [107.850784] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [107.850986] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [107.871473] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [107.871807] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: staged scaling request for 1920x1080->960x540 scaler_users = 0x2
<7> [107.872503] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: staged scaling request for 1920x1080->960x540 scaler_users = 0x2
<7> [107.872970] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:64:plane 2A] using Y plane [PLANE:124:plane 4A]
<7> [107.873541] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 0) -> ( 0 - 1472), size 0 -> 1472
<7> [107.873943] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 0) -> (1472 - 4037), size 0 -> 2565
<7> [107.874367] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.874739] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.875128] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300
<7> [107.875504] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316
<7> [107.875867] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.876298] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.876650] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300
<7> [107.876977] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316
<7> [107.877398] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 1782000 num active planes 2
<7> [107.877995] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: staged scaling request for 1920x1080->960x540 scaler_users = 0x2
<7> [107.878370] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:64:plane 2A] using Y plane [PLANE:124:plane 4A]
<7> [107.878723] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 0) -> ( 0 - 1472), size 0 -> 1472
<7> [107.878998] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 0) -> (1472 - 4037), size 0 -> 2565
<7> [107.879306] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.879578] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.879837] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300
<7> [107.880081] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316
<7> [107.880316] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.880535] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.880747] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300
<7> [107.880958] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316
<7> [107.881234] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 1782000 num active planes 2
<7> [107.881548] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1872 qgv_peak_bw: 48000
<7> [107.881854] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1872 qgv_peak_bw: 48000
<7> [107.882154] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1872
<7> [107.882481] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:64
<7> [107.899668] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [107.899728] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:64:plane 2A] because [FB:556] is removed
<7> [107.899771] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [107.900031] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 1472) -> ( 0 - 0), size 1472 -> 0
<7> [107.900284] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb (1472 - 4037) -> ( 0 - 0), size 2565 -> 0
<7> [107.900486] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [107.900674] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.900868] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.901053] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.901255] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [107.901423] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.901582] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.901742] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.901924] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [107.902189] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [107.902420] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [107.902643] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [107.921663] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [107.921922] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: staged scaling request for 1920x1080->960x540 scaler_users = 0x2
<7> [107.922405] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:64:plane 2A] using Y plane [PLANE:124:plane 4A]
<7> [107.922832] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 0) -> ( 0 - 1571), size 0 -> 1571
<7> [107.923182] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 0) -> (1571 - 4037), size 0 -> 2466
<7> [107.923492] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.923794] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.924098] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [107.924374] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [107.924645] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.924904] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.925194] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [107.925431] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [107.925699] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 3564000 num active planes 2
<7> [107.926162] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: staged scaling request for 1920x1080->960x540 scaler_users = 0x2
<7> [107.926443] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:64:plane 2A] using Y plane [PLANE:124:plane 4A]
<7> [107.926713] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 0) -> ( 0 - 1571), size 0 -> 1571
<7> [107.926935] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 0) -> (1571 - 4037), size 0 -> 2466
<7> [107.927177] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.927385] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.927580] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [107.927777] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [107.927969] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.928174] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.928370] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [107.928559] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [107.928753] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 3564000 num active planes 2
<7> [107.929084] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: staged scaling request for 1920x1080->960x540 scaler_users = 0x2
<7> [107.929288] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:64:plane 2A] using Y plane [PLANE:124:plane 4A]
<7> [107.929499] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 0) -> ( 0 - 1571), size 0 -> 1571
<7> [107.929670] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 0) -> (1571 - 4037), size 0 -> 2466
<7> [107.929834] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.929993] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.930170] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [107.930328] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [107.930479] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.930630] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.930778] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [107.930920] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [107.931074] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 3564000 num active planes 2
<7> [107.931275] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 3743 qgv_peak_bw: 48000
<7> [107.931465] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 3743 qgv_peak_bw: 48000
<7> [107.931650] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 3743
<7> [107.931867] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:64
<7> [107.949601] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [107.949643] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:64:plane 2A] because [FB:556] is removed
<7> [107.949672] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [107.949859] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 1571) -> ( 0 - 0), size 1571 -> 0
<7> [107.950005] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb (1571 - 4037) -> ( 0 - 0), size 2466 -> 0
<7> [107.950164] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [107.950296] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.950433] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.950567] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.950698] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [107.950824] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.950947] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.951083] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.951219] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [107.951400] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [107.951584] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [107.951754] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [107.971680] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [107.971759] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: staged scaling request for 1920x1080->960x540 scaler_users = 0x2
<7> [107.971901] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [107.971993] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [107.972084] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [107.972165] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [107.972238] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [107.972320] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [107.972427] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [107.972531] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [107.972634] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [107.972755] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:64
<7> [107.982810] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [107.982893] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:64:plane 2A] because [FB:556] is removed
<7> [107.982942] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [107.983338] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [107.983641] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [107.983942] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.984279] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.984549] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [107.984847] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [107.985250] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [107.985609] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [107.985953] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.013139] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.013370] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: staged scaling request for 1920x1080->960x540 scaler_users = 0x2
<7> [108.013735] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.013998] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.014293] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.014524] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [108.014728] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [108.014957] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [108.015256] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [108.015524] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [108.015783] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [108.016108] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:64
<7> [108.032953] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [108.033115] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:64:plane 2A] because [FB:556] is removed
<7> [108.033182] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.033637] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [108.034012] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.034457] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.034811] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.035198] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.035594] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.036120] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.036622] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.037153] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.059751] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.060105] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: staged scaling request for 1920x1080->960x540 scaler_users = 0x2
<7> [108.060668] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.061126] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.061538] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.061944] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [108.062383] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [108.062773] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [108.063292] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [108.063721] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [108.064145] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [108.064598] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:64
<7> [108.083366] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [108.083503] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:64:plane 2A] because [FB:556] is removed
<7> [108.083574] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.084157] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [108.084562] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.084930] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.085366] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.085723] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.086170] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.086692] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.087219] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.087711] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.117142] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.117329] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: staged scaling request for 1920x1080->960x540 scaler_users = 0x2
<7> [108.117639] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.117873] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.118100] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.118288] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782
<7> [108.118476] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946
<7> [108.118677] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 4752000 num active planes 1
<7> [108.118925] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 4990 qgv_peak_bw: 48000
<7> [108.119170] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 4990 qgv_peak_bw: 48000
<7> [108.119385] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 4990
<7> [108.119624] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:64
<7> [108.133273] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [108.133404] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:64:plane 2A] because [FB:556] is removed
<7> [108.133468] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.133927] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:64:plane 2A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [108.134336] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.134639] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.134924] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.135236] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.135535] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.135906] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.136292] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.136602] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.151044] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.151461] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: staged scaling request for 1920x1080->960x540 scaler_users = 0x4
<7> [108.152031] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.152529] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.152932] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.153384] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [108.153778] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [108.154265] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 1188000 num active planes 1
<7> [108.154814] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [108.155392] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [108.155868] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [108.156453] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:94
<7> [108.166469] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [108.166559] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:94:plane 3A] because [FB:556] is removed
<7> [108.166607] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.166981] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [108.167362] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.167657] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.167942] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.168233] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.168523] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.168886] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.169248] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.169573] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.184070] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.184368] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: staged scaling request for 1920x1080->960x540 scaler_users = 0x4
<7> [108.184848] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.185273] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.185607] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.185936] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [108.186313] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [108.186733] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [108.187367] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [108.187788] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [108.188177] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [108.188677] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:94
<7> [108.199490] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [108.199580] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:94:plane 3A] because [FB:556] is removed
<7> [108.199635] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.199973] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [108.200320] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.200597] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.200864] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.201158] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.201451] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.201796] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.202156] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.202469] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.217377] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.217683] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: staged scaling request for 1920x1080->960x540 scaler_users = 0x4
<7> [108.218233] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.218625] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.218977] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.219384] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [108.219690] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [108.220033] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [108.220649] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: staged scaling request for 1920x1080->960x540 scaler_users = 0x4
<7> [108.220980] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.221324] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.221600] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.221856] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [108.222133] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [108.222391] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [108.222816] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: staged scaling request for 1920x1080->960x540 scaler_users = 0x4
<7> [108.223096] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.223402] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.223605] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.223801] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [108.223992] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [108.224260] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [108.224585] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [108.224844] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [108.225093] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [108.225408] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:94
<7> [108.232750] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [108.232779] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:94:plane 3A] because [FB:556] is removed
<7> [108.232795] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.232920] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [108.233020] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.233136] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.233253] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.233340] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.233441] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.233569] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.233694] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.233817] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.250458] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.250673] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: staged scaling request for 1920x1080->960x540 scaler_users = 0x4
<7> [108.250996] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.251308] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.251566] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.251823] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782
<7> [108.252079] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946
<7> [108.252349] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 4752000 num active planes 1
<7> [108.252788] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: staged scaling request for 1920x1080->960x540 scaler_users = 0x4
<7> [108.253061] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.253292] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.253509] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.253726] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782
<7> [108.253941] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946
<7> [108.254178] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 4752000 num active planes 1
<7> [108.254545] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: staged scaling request for 1920x1080->960x540 scaler_users = 0x4
<7> [108.254770] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.254964] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.255177] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.255366] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782
<7> [108.255538] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946
<7> [108.255717] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 4752000 num active planes 1
<7> [108.255960] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 4990 qgv_peak_bw: 48000
<7> [108.256209] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 4990 qgv_peak_bw: 48000
<7> [108.256439] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 4990
<7> [108.256713] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:94
<7> [108.266263] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [108.266299] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:94:plane 3A] because [FB:556] is removed
<7> [108.266319] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.266474] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [108.266592] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.266701] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.266810] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.266922] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.267055] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.267258] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.267489] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.267696] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.286783] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.287069] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: staged scaling request for 1920x1080->960x540 scaler_users = 0x4
<7> [108.287481] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.287745] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.287985] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.288252] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [108.288521] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [108.288760] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 1188000 num active planes 1
<7> [108.289069] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [108.289361] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [108.289627] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [108.289951] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:94
<6> [108.299026] xe 0000:03:00.0: [drm] PL2 disabled for channel 0, val 0x00000000
<7> [108.299061] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [108.299111] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:94:plane 3A] because [FB:556] is removed
<7> [108.299130] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.299247] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [108.299327] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.299401] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.299473] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.299546] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.299626] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.299728] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.299826] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.299921] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.317234] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.317308] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: staged scaling request for 1920x1080->960x540 scaler_users = 0x4
<7> [108.317412] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:94:plane 3A] using Y plane [PLANE:124:plane 4A]
<7> [108.317512] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 0) -> ( 0 - 1472), size 0 -> 1472
<7> [108.317586] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 0) -> (1472 - 4037), size 0 -> 2565
<7> [108.317656] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.317723] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.317790] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300
<7> [108.317856] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316
<7> [108.317920] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.317985] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.318060] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300
<7> [108.318127] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316
<7> [108.318205] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 1782000 num active planes 2
<7> [108.318308] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1872 qgv_peak_bw: 48000
<7> [108.318405] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1872 qgv_peak_bw: 48000
<7> [108.318498] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1872
<7> [108.318613] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:94
<7> [108.328953] xe 0000:03:00.0: [drm:xe_hwmon_read [xe]] thermal data for group 0 val 0x28282728
<7> [108.329198] xe 0000:03:00.0: [drm:xe_hwmon_read [xe]] thermal data for group 1 val 0x28282729
<7> [108.332520] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [108.332542] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:94:plane 3A] because [FB:556] is removed
<7> [108.332561] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.332654] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 1472) -> ( 0 - 0), size 1472 -> 0
<7> [108.332725] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb (1472 - 4037) -> ( 0 - 0), size 2565 -> 0
<7> [108.332791] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.332854] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.332916] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.332976] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.333037] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.333124] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.333190] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.333255] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.333330] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.333431] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.333530] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.333629] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.352717] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.352864] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: staged scaling request for 1920x1080->960x540 scaler_users = 0x4
<7> [108.353105] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:94:plane 3A] using Y plane [PLANE:124:plane 4A]
<7> [108.353353] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 0) -> ( 0 - 1571), size 0 -> 1571
<7> [108.353536] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 0) -> (1571 - 4037), size 0 -> 2466
<7> [108.353702] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.353859] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.354007] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [108.354190] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [108.354334] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.354475] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.354616] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [108.354756] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [108.354922] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 3564000 num active planes 2
<7> [108.355159] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 3743 qgv_peak_bw: 48000
<7> [108.355361] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 3743 qgv_peak_bw: 48000
<7> [108.355555] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 3743
<7> [108.355790] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:94
<7> [108.366111] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [108.366184] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:94:plane 3A] because [FB:556] is removed
<7> [108.366230] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.366478] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 1571) -> ( 0 - 0), size 1571 -> 0
<7> [108.366679] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb (1571 - 4037) -> ( 0 - 0), size 2466 -> 0
<7> [108.366880] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.367096] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.367299] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.367495] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.367687] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.367874] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.368066] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.368252] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.368469] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.368744] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.369003] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.369285] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.388177] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.388259] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: staged scaling request for 1920x1080->960x540 scaler_users = 0x4
<7> [108.388367] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.388447] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.388519] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.388594] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [108.388665] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [108.388745] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [108.388847] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [108.388942] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [108.389036] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [108.389169] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:94
<7> [108.399498] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [108.399595] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:94:plane 3A] because [FB:556] is removed
<7> [108.399646] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.399949] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [108.400275] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.400543] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.400800] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.401072] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.401354] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.401717] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.402309] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.402645] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.426027] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.426365] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: staged scaling request for 1920x1080->960x540 scaler_users = 0x4
<7> [108.426882] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.427343] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.427713] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.428028] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [108.428395] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [108.428750] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [108.429191] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [108.429590] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [108.429962] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [108.430421] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:94
<7> [108.432550] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [108.432635] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:94:plane 3A] because [FB:556] is removed
<7> [108.432681] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.433012] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [108.433340] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.433558] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.433762] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.433961] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.434205] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.434469] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.434723] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.434972] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.463666] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.463895] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: staged scaling request for 1920x1080->960x540 scaler_users = 0x4
<7> [108.464275] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.464520] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.464742] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.464951] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [108.465190] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [108.465489] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [108.465789] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [108.466032] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [108.466311] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [108.466576] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:94
<7> [108.483288] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [108.483431] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:94:plane 3A] because [FB:556] is removed
<7> [108.483501] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.484023] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [108.484545] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.484922] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.485355] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.485714] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.486103] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.486565] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.487001] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.487474] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.517293] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.517498] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: staged scaling request for 1920x1080->960x540 scaler_users = 0x4
<7> [108.517801] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.518020] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.518249] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.518434] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782
<7> [108.518615] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946
<7> [108.518819] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 4752000 num active planes 1
<7> [108.519137] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: staged scaling request for 1920x1080->960x540 scaler_users = 0x4
<7> [108.519317] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.519478] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.519622] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.519760] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782
<7> [108.519895] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946
<7> [108.520033] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 4752000 num active planes 1
<7> [108.520304] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: staged scaling request for 1920x1080->960x540 scaler_users = 0x4
<7> [108.520451] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.520578] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.520695] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.520813] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782
<7> [108.520936] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946
<7> [108.521059] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 4752000 num active planes 1
<7> [108.521226] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 4990 qgv_peak_bw: 48000
<7> [108.521382] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 4990 qgv_peak_bw: 48000
<7> [108.521533] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 4990
<7> [108.521709] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:94
<7> [108.533063] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [108.533133] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:94:plane 3A] because [FB:556] is removed
<7> [108.533173] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.533474] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:94:plane 3A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [108.533704] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.533918] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.534155] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.534360] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.534588] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.534886] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.535183] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.535435] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.550725] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:559]
<7> [108.551068] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.3: staged scaling request for 1920x1080->960x540 scaler_users = 0x8
<7> [108.551509] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.551829] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.552155] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.552436] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [108.552695] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [108.552989] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 1188000 num active planes 1
<7> [108.553543] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.3: staged scaling request for 1920x1080->960x540 scaler_users = 0x8
<7> [108.553810] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.554056] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.554281] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.554496] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [108.554700] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [108.554916] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 1188000 num active planes 1
<7> [108.555336] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.3: staged scaling request for 1920x1080->960x540 scaler_users = 0x8
<7> [108.555562] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.555763] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.555950] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.556164] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [108.556348] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [108.556535] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 1188000 num active planes 1
<7> [108.556787] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [108.557044] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [108.557282] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [108.557557] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:124
<7> [108.565979] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:559] from all active usage due to RMFB ioctl
<7> [108.566013] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:124:plane 4A] because [FB:559] is removed
<7> [108.566044] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.566158] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [108.566258] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.566352] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.566443] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.566533] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.566633] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.566763] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.566891] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.567015] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.583698] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.583923] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.3: staged scaling request for 1920x1080->960x540 scaler_users = 0x8
<7> [108.584370] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.584689] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.584976] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.585280] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [108.585536] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [108.585831] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [108.586225] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [108.586557] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [108.586883] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [108.587271] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:124
<7> [108.599826] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [108.599919] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:124:plane 4A] because [FB:556] is removed
<7> [108.599971] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.600468] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [108.600812] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.601165] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.601465] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.601748] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.602073] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.602460] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.602818] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.603207] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.617586] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.617858] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.3: staged scaling request for 1920x1080->960x540 scaler_users = 0x8
<7> [108.618412] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.618791] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.619180] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.619523] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [108.619858] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [108.620238] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [108.620673] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [108.621078] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [108.621460] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [108.621912] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:124
<7> [108.633189] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [108.633292] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:124:plane 4A] because [FB:556] is removed
<7> [108.633345] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.633728] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [108.634094] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.634391] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.634679] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.634952] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.635303] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.635679] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.636026] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.636416] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.655314] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.655652] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.3: staged scaling request for 1920x1080->960x540 scaler_users = 0x8
<7> [108.656286] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.656725] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.657171] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.657567] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [108.657950] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [108.658435] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 1188000 num active planes 1
<7> [108.658997] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [108.659608] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [108.660096] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [108.660642] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:124
<7> [108.665792] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [108.665859] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:124:plane 4A] because [FB:556] is removed
<7> [108.665894] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.666195] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [108.666395] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.666572] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.666739] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.666899] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.667086] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.667319] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.667532] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.667734] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.693276] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.693643] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.3: staged scaling request for 1920x1080->960x540 scaler_users = 0x8
<7> [108.694292] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.694726] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.695146] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.695487] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [108.695822] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [108.696206] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [108.696644] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [108.697065] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [108.697445] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [108.697896] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:124
<7> [108.716667] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [108.716798] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:124:plane 4A] because [FB:556] is removed
<7> [108.716869] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.717519] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [108.717961] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.718437] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.718833] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.719267] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.719724] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.720319] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.720868] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.721447] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.747533] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.747783] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.3: staged scaling request for 1920x1080->960x540 scaler_users = 0x8
<7> [108.748209] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.748557] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.748802] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.749071] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [108.749353] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [108.749611] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [108.749915] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [108.750226] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [108.750524] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [108.750818] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:124
<7> [108.766828] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [108.766960] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:124:plane 4A] because [FB:556] is removed
<7> [108.767089] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.767712] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [108.768194] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.768660] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.769075] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.769461] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.769828] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.770330] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.770783] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.771221] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.793403] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.793758] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.3: staged scaling request for 1920x1080->960x540 scaler_users = 0x8
<7> [108.794392] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.794829] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.795282] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.795672] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [108.796095] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [108.796495] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [108.796991] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [108.797481] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [108.797906] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [108.798389] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:124
<7> [108.816660] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [108.816785] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:124:plane 4A] because [FB:556] is removed
<7> [108.816855] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.817475] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:124:plane 4A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [108.817906] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.818351] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.818738] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.819140] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.819558] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.820147] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.820686] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.821251] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.834223] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.834653] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.4: staged scaling request for 1920x1080->960x540 scaler_users = 0x10
<7> [108.835228] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:134:plane 5A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.835718] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.836107] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.836500] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [108.836822] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [108.837248] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 1188000 num active planes 1
<7> [108.837862] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.4: staged scaling request for 1920x1080->960x540 scaler_users = 0x10
<7> [108.838221] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:134:plane 5A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.838530] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.838785] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.839015] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [108.839300] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [108.839584] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 1188000 num active planes 1
<7> [108.839904] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [108.840254] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [108.840580] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [108.840915] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:134
<7> [108.849248] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [108.849296] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:134:plane 5A] because [FB:556] is removed
<7> [108.849321] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.849479] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:134:plane 5A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [108.849612] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.849741] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.849879] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.850017] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.850248] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.850489] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.850688] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.850885] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.867200] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.867458] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.4: staged scaling request for 1920x1080->960x540 scaler_users = 0x10
<7> [108.867911] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:134:plane 5A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.868316] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.868640] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.868955] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [108.869303] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [108.869650] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [108.870188] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.4: staged scaling request for 1920x1080->960x540 scaler_users = 0x10
<7> [108.870510] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:134:plane 5A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.870771] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.871013] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.871306] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [108.871553] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [108.871821] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [108.872264] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.4: staged scaling request for 1920x1080->960x540 scaler_users = 0x10
<7> [108.872514] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:134:plane 5A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.872728] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.872934] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.873152] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [108.873341] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [108.873540] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [108.873826] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [108.874105] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [108.874363] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [108.874659] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:134
<7> [108.882800] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [108.882830] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:134:plane 5A] because [FB:556] is removed
<7> [108.882847] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.882980] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:134:plane 5A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [108.883107] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.883208] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.883305] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.883401] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.883510] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.883651] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.883790] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.883917] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.900521] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.900739] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.4: staged scaling request for 1920x1080->960x540 scaler_users = 0x10
<7> [108.901133] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:134:plane 5A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.901438] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.901691] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.901939] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [108.902231] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [108.902557] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [108.902888] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [108.903235] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [108.903560] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [108.903892] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:134
<7> [108.916220] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [108.916321] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:134:plane 5A] because [FB:556] is removed
<7> [108.916373] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.916712] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:134:plane 5A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [108.917014] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.917395] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.917776] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.918087] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.918465] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.918838] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.919242] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.919654] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.938229] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.938585] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.4: staged scaling request for 1920x1080->960x540 scaler_users = 0x10
<7> [108.939201] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:134:plane 5A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.939645] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.940086] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.940482] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [108.940863] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [108.941386] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 1188000 num active planes 1
<7> [108.941940] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [108.942472] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [108.942943] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [108.943504] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:134
<7> [108.949135] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [108.949202] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:134:plane 5A] because [FB:556] is removed
<7> [108.949237] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0
<7> [108.949487] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:134:plane 5A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [108.949677] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [108.949860] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.950077] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.950261] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [108.950475] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [108.950737] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [108.950986] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [108.951263] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [108.976340] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [108.976669] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.4: staged scaling request for 1920x1080->960x540 scaler_users = 0x10
<7> [108.977285] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:134:plane 5A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [108.977759] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [108.978154] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [108.978556] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [108.978890] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [108.979294] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [108.979768] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [108.980179] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [108.980586] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [108.981002] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:134
<7> [108.999978] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [109.000161] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:134:plane 5A] because [FB:556] is removed
<7> [109.000233] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0
<7> [109.000792] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:134:plane 5A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [109.001264] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.001661] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.002075] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.002451] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.002864] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [109.003479] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [109.004039] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [109.004580] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [109.026536] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [109.026881] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.4: staged scaling request for 1920x1080->960x540 scaler_users = 0x10
<7> [109.027573] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:134:plane 5A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.028043] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.028466] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.028862] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [109.029301] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [109.029706] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [109.030245] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [109.030693] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [109.031144] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [109.031635] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:134
<7> [109.049977] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [109.050178] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:134:plane 5A] because [FB:556] is removed
<7> [109.050250] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0
<7> [109.050800] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:134:plane 5A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [109.051283] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.051678] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.052093] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.052471] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.052883] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [109.053478] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [109.054057] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [109.054587] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [109.080145] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [109.080451] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.4: staged scaling request for 1920x1080->960x540 scaler_users = 0x10
<7> [109.080910] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:134:plane 5A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.081325] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.081624] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.081906] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [109.082197] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [109.082493] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2376000 num active planes 1
<7> [109.082873] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [109.083240] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [109.083554] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [109.083899] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:150:pipe A] attached scaler id 0.0 to PLANE:134
<7> [109.099964] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [109.100145] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:134:plane 5A] because [FB:556] is removed
<7> [109.100217] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:150:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0
<7> [109.100768] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:134:plane 5A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [109.101254] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.101650] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.102074] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.102459] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.102879] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [109.103467] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [109.103948] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [109.104459] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<6> [109.117420] [IGT] kms_plane_scaling: finished subtest pipe-A, SUCCESS
<6> [109.119325] [IGT] kms_plane_scaling: starting dynamic subtest pipe-B
<7> [109.123588] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [109.127891] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [109.128745] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [109.129173] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [109.129853] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [109.130170] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [109.130451] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [109.133705] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [109.134460] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [109.134679] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [109.135132] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [109.135070] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [109.135519] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [109.135705] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [109.136158] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [109.140005] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [109.140768] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [109.140916] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [109.141302] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [109.141421] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [109.141532] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [109.142619] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [109.143524] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:268:pipe B] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000
<7> [109.143632] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000
<7> [109.143734] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0
<7> [109.143835] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:268:pipe B]
<7> [109.143935] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected yes, found no)
<7> [109.144039] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [109.144137] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [109.144233] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 4, found 0)
<7> [109.144330] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 5190451/8388608 link 288358/524288, found tu 0, data 0/0 link 0/0)
<7> [109.144425] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000080, found 0x00000000)
<7> [109.144519] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [109.144609] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)
<7> [109.144703] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2200, found 0)
<7> [109.144795] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)
<7> [109.144885] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2200, found 0)
<7> [109.144973] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)
<7> [109.145068] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2052, found 0)
<7> [109.145155] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)
<7> [109.145240] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)
<7> [109.145327] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)
<7> [109.145414] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)
<7> [109.145501] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)
<7> [109.145586] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)
<7> [109.145672] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)
<7> [109.145757] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2200, found 0)
<7> [109.145843] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)
<7> [109.145928] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2200, found 0)
<7> [109.146017] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)
<7> [109.146105] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2052, found 0)
<7> [109.146191] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)
<7> [109.146277] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)
<7> [109.146362] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)
<7> [109.146448] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)
<7> [109.146534] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)
<7> [109.146618] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)
<7> [109.146703] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [109.146787] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)
<7> [109.146873] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)
<7> [109.146959] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)
<7> [109.147054] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 36, found 0)
<7> [109.147139] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 148500, found 0)
<7> [109.147225] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 148500, found 0)
<7> [109.147312] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 270000, found 0)
<7> [109.147399] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset
<7> [109.147486] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.enable (expected no, found yes)
<7> [109.147573] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes)
<7> [109.147661] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1)
<7> [109.147747] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in lane_count (expected 0, found 4)
<7> [109.147834] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 5190451/8388608 link 288358/524288)
<7> [109.147920] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000080)
<7> [109.148006] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [109.148105] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)
<7> [109.148192] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2200)
<7> [109.148277] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)
<7> [109.148362] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2200)
<7> [109.148448] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)
<7> [109.148535] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2052)
<7> [109.148623] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)
<7> [109.148710] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)
<7> [109.148795] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)
<7> [109.148879] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)
<7> [109.148964] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)
<7> [109.149058] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)
<7> [109.149145] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)
<7> [109.149231] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2200)
<7> [109.149317] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)
<7> [109.149402] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2200)
<7> [109.149489] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)
<7> [109.149574] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2052)
<7> [109.149660] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)
<7> [109.149745] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)
<7> [109.149829] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)
<7> [109.149914] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)
<7> [109.149999] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)
<7> [109.150096] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)
<7> [109.150181] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [109.150266] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)
<7> [109.150352] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)
<7> [109.150437] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in enhanced_framing (expected no, found yes)
<7> [109.150522] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in dpll_hw_state
<7> [109.150608] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [109.150694] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [109.150779] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state:
<7> [109.150865] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000
<7> [109.150951] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [109.151045] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[0] = 0x40e8
<7> [109.151130] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[1] = 0x7d20
<7> [109.151214] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[2] = 0x0a06
<7> [109.151298] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[3] = 0x8f1c
<7> [109.151382] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[4] = 0x0000
<7> [109.151468] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[5] = 0x0000
<7> [109.151552] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[6] = 0x2200
<7> [109.151636] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[7] = 0xffff
<7> [109.151718] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[8] = 0x0400
<7> [109.151801] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[9] = 0x0000
<7> [109.151885] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0001
<7> [109.151969] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00
<7> [109.152062] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [109.152148] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [109.152233] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state:
<7> [109.152318] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000
<7> [109.152404] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [109.152490] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[0] = 0x308c
<7> [109.152576] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[1] = 0x2110
<7> [109.152662] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[2] = 0xcc9c
<7> [109.152746] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[3] = 0xbfc1
<7> [109.152830] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[4] = 0x4b9a
<7> [109.152916] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[5] = 0x3f81
<7> [109.153001] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[6] = 0x2000
<7> [109.153097] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[7] = 0x0001
<7> [109.153182] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[8] = 0x5000
<7> [109.153267] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[9] = 0x0000
<7> [109.153350] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000
<7> [109.153435] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00
<7> [109.153521] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 36)
<7> [109.153608] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 148500)
<7> [109.153693] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 148500)
<7> [109.153778] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in port_clock (expected 0, found 270000)
<7> [109.153865] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset
<7> [109.153951] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2
<7> [109.154057] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 1920x1080->960x540 scaler_users = 0x40
<7> [109.154150] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x2
<7> [109.154224] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x1 -> 0x2
<7> [109.154299] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb (4037 - 4096) -> ( 0 - 0), size 59 -> 0
<7> [109.154373] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.154442] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59
<7> [109.154510] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.154575] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.154642] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [109.154709] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [109.154790] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1188000 num active planes 1
<7> [109.154888] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [109.154982] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [109.155099] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [109.155204] xe 0000:03:00.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:150:pipe A] min cdclk: 297000 kHz -> 0 kHz
<7> [109.155297] xe 0000:03:00.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:268:pipe B] min cdclk: 0 kHz -> 297000 kHz
<7> [109.155399] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 74250 kHz -> 18563 kHz
<7> [109.155505] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated TC PLL 2
<7> [109.155597] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving TC PLL 2
<7> [109.155687] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152
<7> [109.155763] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: no [modeset]
<7> [109.155860] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [NOFB], visible: no
<7> [109.155955] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no
<7> [109.156058] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no
<7> [109.156153] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no
<7> [109.156247] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no
<7> [109.156338] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no
<7> [109.156430] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset]
<7> [109.156520] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB
<7> [109.156608] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0
<7> [109.156695] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [109.156780] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [109.156866] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [109.156955] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [109.157049] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64
<7> [109.157137] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [109.157225] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled
<7> [109.157312] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [109.157399] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [109.157487] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [109.157574] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0
<7> [109.157661] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00
<7> [109.157749] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11
<7> [109.157836] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00
<7> [109.157922] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [109.158007] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [109.158108] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36
<7> [109.158196] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125
<7> [109.158283] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [109.158371] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [109.158459] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [109.158547] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [109.158636] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [109.158723] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [109.158811] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 297000
<7> [109.158899] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0
<7> [109.158986] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x40, scaler_id: -1, scaling_filter: 0
<7> [109.159096] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [109.159183] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [109.159270] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [109.159358] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:
<7> [109.159444] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000
<7> [109.159531] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [109.159619] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c
<7> [109.159706] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110
<7> [109.159792] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c
<7> [109.159880] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1
<7> [109.159967] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a
<7> [109.160062] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81
<7> [109.160148] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000
<7> [109.160233] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001
<7> [109.160319] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000
<7> [109.160404] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000
<7> [109.160492] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000
<7> [109.160578] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00
<7> [109.160665] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [109.160751] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [109.160837] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [109.160924] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [109.161014] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [109.161100] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [109.161184] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [109.161269] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [109.161353] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [109.161438] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [109.161524] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [109.161610] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [109.161697] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [109.161785] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:556] 1920x1080 format = RG16 little-endian (0x36314752) modifier = 0x0, visible: yes
<7> [109.161873] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0
<7> [109.161960] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 960x540+0+0
<7> [109.162055] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no
<7> [109.162142] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no
<7> [109.162229] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no
<7> [109.162318] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no
<7> [109.162405] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no
<7> [109.163006] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [109.163160] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000)
<7> [109.163256] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G] Disable audio codec on [CRTC:150:pipe A]
<7> [109.182432] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [109.182741] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7> [109.204963] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:150:pipe A]
<7> [109.207102] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2
<7> [109.207213] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<6> [109.207602] pcieport 0000:00:01.0: PME: Spurious native interrupt!
<7> [109.207585] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F]
<7> [109.207772] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A]
<7> [109.207958] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B]
<7> [109.208172] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C]
<7> [109.208354] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D]
<7> [109.208528] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G]
<7> [109.208701] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A]
<7> [109.208882] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B]
<7> [109.209059] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C]
<7> [109.209218] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D]
<7> [109.209380] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H]
<7> [109.209540] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I]
<7> [109.209695] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A]
<7> [109.209849] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B]
<7> [109.209997] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C]
<7> [109.210165] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D]
<7> [109.210322] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:507:DP-1]
<7> [109.210679] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:520:HDMI-A-1]
<7> [109.210830] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:534:HDMI-A-2]
<7> [109.211185] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:538:HDMI-A-3]
<7> [109.211326] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:542:DP-3]
<7> [109.211660] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:550:HDMI-A-4]
<7> [109.211816] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)
<7> [109.212179] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x2, on? 0) for [CRTC:268:pipe B]
<7> [109.212321] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2
<7> [109.218533] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01
<7> [109.225279] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [109.226675] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01
<7> [109.227381] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a
<7> [109.229208] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [109.229991] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1
<7> [109.236049] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Clock recovery OK
<7> [109.236500] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3
<7> [109.243104] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful
<7> [109.243510] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4
<7> [109.245049] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe B
<7> [109.262417] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [109.263305] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000)
<7> [109.264159] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A]
<7> [109.265100] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G] Enable audio codec on [CRTC:268:pipe B], 40 bytes ELD
<7> [109.279302] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7> [109.279519] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:526:DP-2]
<7> [109.280188] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]
<7> [109.286041] xe 0000:03:00.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe B
<7> [109.286576] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [109.286705] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:556] is removed
<7> [109.286777] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [109.287267] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [109.287621] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.287959] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.288317] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.288629] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.288968] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [109.289412] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [109.289804] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [109.290183] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [109.297494] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [109.297786] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 1920x1080->960x540 scaler_users = 0x40
<7> [109.298244] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.298580] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.298857] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.299178] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [109.299476] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [109.299761] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [109.300260] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 1920x1080->960x540 scaler_users = 0x40
<7> [109.300515] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.300735] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.300953] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.301210] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [109.301484] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [109.301683] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [109.301959] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [109.302248] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [109.302544] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [109.302841] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 37125 kHz
<7> [109.303087] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152
<7> [109.312779] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [109.312839] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:556] is removed
<7> [109.312869] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [109.313119] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [109.313302] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.313457] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.313617] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.313768] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.313943] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [109.314181] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [109.314396] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [109.314581] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [109.330606] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [109.330885] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 1920x1080->960x540 scaler_users = 0x40
<7> [109.331404] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.331747] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.332089] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.332405] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [109.332703] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [109.333029] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [109.333556] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 1920x1080->960x540 scaler_users = 0x40
<7> [109.333902] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.334199] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.334461] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.334716] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [109.334959] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [109.335238] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [109.335642] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 1920x1080->960x540 scaler_users = 0x40
<7> [109.335887] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.336121] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.336329] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.336530] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [109.336727] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [109.336930] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [109.337222] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [109.337486] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [109.337749] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [109.338051] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152
<7> [109.346096] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [109.346446] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [109.346478] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:556] is removed
<7> [109.346496] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [109.346634] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [109.346739] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.346840] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.346941] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.347067] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.347184] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [109.347335] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [109.347484] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [109.347629] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [109.363740] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [109.363938] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 1920x1080->960x540 scaler_users = 0x40
<7> [109.364358] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.364661] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.364920] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.365198] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782
<7> [109.365501] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946
<7> [109.365773] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 4752000 num active planes 1
<7> [109.366101] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 4990 qgv_peak_bw: 48000
<7> [109.366439] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 4990 qgv_peak_bw: 48000
<7> [109.366724] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 4990
<7> [109.367086] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 37125 kHz -> 74250 kHz
<7> [109.367374] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152
<7> [109.379587] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [109.379674] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:556] is removed
<7> [109.379718] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [109.380125] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [109.380459] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.380728] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.380975] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.381279] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.381613] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [109.381956] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [109.382308] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [109.382653] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [109.403668] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [109.403971] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 1920x1080->960x540 scaler_users = 0x40
<7> [109.404480] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.404864] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.405216] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.405534] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [109.405794] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [109.406124] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1188000 num active planes 1
<7> [109.406518] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [109.406851] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [109.407268] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [109.407630] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152
<7> [109.412556] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [109.412627] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:556] is removed
<7> [109.412666] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [109.412968] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [109.413277] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.413554] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.413765] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.413971] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.414253] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [109.414544] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [109.414810] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [109.415078] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [109.434373] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [109.434711] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 1920x1080->960x540 scaler_users = 0x40
<7> [109.434944] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [109.435065] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 1472), size 0 -> 1472
<7> [109.435147] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> (1472 - 4037), size 0 -> 2565
<7> [109.435224] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.435299] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.435372] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300
<7> [109.435444] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316
<7> [109.435515] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.435585] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.435655] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300
<7> [109.435725] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316
<7> [109.435808] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1782000 num active planes 2
<7> [109.435916] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1872 qgv_peak_bw: 48000
<7> [109.436025] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1872 qgv_peak_bw: 48000
<7> [109.436127] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1872
<7> [109.436248] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152
<7> [109.446483] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [109.446550] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:556] is removed
<7> [109.446595] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [109.446883] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 1472) -> ( 0 - 0), size 1472 -> 0
<7> [109.447161] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (1472 - 4037) -> ( 0 - 0), size 2565 -> 0
<7> [109.447378] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.447586] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.447795] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.447996] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.448217] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.448399] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.448577] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.448756] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.448973] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [109.449265] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [109.449512] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [109.449743] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [109.468172] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [109.468410] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 1920x1080->960x540 scaler_users = 0x40
<7> [109.468805] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:152:plane 1B] using Y plane [PLANE:242:plane 4B]
<7> [109.469314] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 1571), size 0 -> 1571
<7> [109.469655] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> (1571 - 4037), size 0 -> 2466
<7> [109.469973] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.470328] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.470633] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [109.470916] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [109.471212] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.471456] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.471692] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [109.471930] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [109.472220] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 3564000 num active planes 2
<7> [109.472563] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 3743 qgv_peak_bw: 48000
<7> [109.472895] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 3743 qgv_peak_bw: 48000
<7> [109.473226] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 3743
<7> [109.473586] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152
<7> [109.479071] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [109.479141] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:556] is removed
<7> [109.479169] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [109.479327] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 1571) -> ( 0 - 0), size 1571 -> 0
<7> [109.479446] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (1571 - 4037) -> ( 0 - 0), size 2466 -> 0
<7> [109.479555] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.479660] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.479768] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.479871] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.479967] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.480089] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.480183] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.480274] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.480376] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [109.480509] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [109.480639] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [109.480766] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [109.503647] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [109.503944] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 1920x1080->960x540 scaler_users = 0x40
<7> [109.504531] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.504947] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.505379] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.505732] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [109.506104] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [109.506481] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [109.506939] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [109.507456] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [109.507869] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [109.508354] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152
<7> [109.512524] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [109.512587] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:556] is removed
<7> [109.512621] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [109.512885] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [109.513139] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.513323] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.513492] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.513651] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.513826] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [109.514067] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [109.514285] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [109.514492] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [109.539690] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [109.540055] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 1920x1080->960x540 scaler_users = 0x40
<7> [109.540626] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.541061] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.541446] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.541818] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [109.542181] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [109.542530] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [109.542965] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [109.543407] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [109.543794] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [109.544237] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152
<7> [109.563253] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [109.563466] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:556] is removed
<7> [109.563545] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [109.564119] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [109.564520] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.564885] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.565320] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.565681] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.566117] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [109.566636] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [109.567205] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [109.567693] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [109.594225] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [109.594516] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 1920x1080->960x540 scaler_users = 0x40
<7> [109.594937] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.595292] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.595564] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.595832] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [109.596115] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [109.596395] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [109.596801] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 1920x1080->960x540 scaler_users = 0x40
<7> [109.597061] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.597270] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.597471] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.597657] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [109.597841] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [109.598043] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [109.598299] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [109.598536] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [109.598765] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [109.599044] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152
<7> [109.613163] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [109.613311] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:556] is removed
<7> [109.613366] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [109.613749] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [109.614122] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.614418] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.614708] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.614967] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.615336] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [109.615716] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [109.616088] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [109.616418] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [109.646967] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [109.647189] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 1920x1080->960x540 scaler_users = 0x40
<7> [109.647490] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.647712] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.647908] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.648133] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782
<7> [109.648312] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946
<7> [109.648498] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 4752000 num active planes 1
<7> [109.648807] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 1920x1080->960x540 scaler_users = 0x40
<7> [109.649003] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.649150] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.649295] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.649439] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782
<7> [109.649573] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946
<7> [109.649719] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 4752000 num active planes 1
<7> [109.649974] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 1920x1080->960x540 scaler_users = 0x40
<7> [109.650144] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.650274] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.650405] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.650526] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782
<7> [109.650643] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946
<7> [109.650768] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 4752000 num active planes 1
<7> [109.650937] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 4990 qgv_peak_bw: 48000
<7> [109.651108] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 4990 qgv_peak_bw: 48000
<7> [109.651263] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 4990
<7> [109.651442] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152
<7> [109.663105] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [109.663201] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:556] is removed
<7> [109.663237] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [109.663497] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [109.663695] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.663883] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.664127] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.664325] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.664546] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [109.664824] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [109.665121] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [109.665373] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [109.680812] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:560]
<7> [109.681139] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 1920x1080->960x540 scaler_users = 0x80
<7> [109.681556] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.681867] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.682199] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.682486] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [109.682761] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [109.683085] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1188000 num active planes 1
<7> [109.683628] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 1920x1080->960x540 scaler_users = 0x80
<7> [109.683928] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.684242] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.684499] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.684731] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [109.684952] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [109.685223] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1188000 num active planes 1
<7> [109.685652] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 1920x1080->960x540 scaler_users = 0x80
<7> [109.685916] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.686161] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.686364] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.686562] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [109.686753] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [109.686942] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1188000 num active planes 1
<7> [109.687233] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [109.687495] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [109.687736] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [109.688045] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182
<7> [109.696221] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:560] from all active usage due to RMFB ioctl
<7> [109.696252] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:560] is removed
<7> [109.696270] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0
<7> [109.696403] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [109.696508] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.696605] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.696698] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.696791] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.696899] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [109.697057] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [109.697199] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [109.697336] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [109.713837] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [109.714079] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 1920x1080->960x540 scaler_users = 0x80
<7> [109.714464] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.714737] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.715006] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.715291] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [109.715550] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [109.715830] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [109.716195] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [109.716528] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [109.716848] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [109.717241] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182
<7> [109.729587] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [109.729680] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:556] is removed
<7> [109.729737] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0
<7> [109.730139] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [109.730431] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.730701] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.730969] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.731274] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.731551] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [109.731915] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [109.732272] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [109.732599] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [109.747503] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [109.747804] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 1920x1080->960x540 scaler_users = 0x80
<7> [109.748362] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.748749] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.749132] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.749474] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [109.749799] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [109.750173] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [109.750607] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [109.751032] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [109.751421] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [109.751876] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182
<7> [109.763160] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [109.763319] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:556] is removed
<7> [109.763373] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0
<7> [109.763751] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [109.764099] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.764400] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.764692] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.764958] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.765322] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [109.765695] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [109.766069] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [109.766400] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [109.780915] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [109.781203] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 1920x1080->960x540 scaler_users = 0x80
<7> [109.781669] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.782041] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.782383] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.782717] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782
<7> [109.783024] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946
<7> [109.783366] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 4752000 num active planes 1
<7> [109.783806] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 4990 qgv_peak_bw: 48000
<7> [109.784243] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 4990 qgv_peak_bw: 48000
<7> [109.784625] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 4990
<7> [109.785075] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182
<7> [109.796662] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [109.796759] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:556] is removed
<7> [109.796812] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0
<7> [109.797284] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [109.797636] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.797942] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.798271] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.798548] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.798846] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [109.799238] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [109.799603] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [109.799946] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [109.831312] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [109.831482] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 1920x1080->960x540 scaler_users = 0x80
<7> [109.831720] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.831898] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.832080] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.832234] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [109.832385] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [109.832542] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1188000 num active planes 1
<7> [109.832738] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [109.832924] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [109.833120] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [109.833329] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182
<7> [109.846424] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [109.846475] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:556] is removed
<7> [109.846502] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0
<7> [109.846713] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [109.846870] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.847161] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.847299] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.847430] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.847576] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [109.847764] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [109.847937] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [109.848229] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [109.867338] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [109.867638] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 1920x1080->960x540 scaler_users = 0x80
<7> [109.868186] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:182:plane 2B] using Y plane [PLANE:242:plane 4B]
<7> [109.868716] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 1472), size 0 -> 1472
<7> [109.869165] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> (1472 - 4037), size 0 -> 2565
<7> [109.869559] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.869943] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.870383] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300
<7> [109.870762] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316
<7> [109.871209] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.871573] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.871933] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300
<7> [109.872356] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316
<7> [109.872783] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1782000 num active planes 2
<7> [109.873385] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1872 qgv_peak_bw: 48000
<7> [109.873929] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1872 qgv_peak_bw: 48000
<7> [109.874506] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1872
<7> [109.875117] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182
<7> [109.879863] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [109.879941] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:556] is removed
<7> [109.880016] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0
<7> [109.880323] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 1472) -> ( 0 - 0), size 1472 -> 0
<7> [109.880550] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (1472 - 4037) -> ( 0 - 0), size 2565 -> 0
<7> [109.880760] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.880950] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.881182] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.881360] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.881532] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.881701] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.881870] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.882054] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.882235] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [109.882469] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [109.882700] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [109.882920] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [109.903733] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [109.904084] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 1920x1080->960x540 scaler_users = 0x80
<7> [109.904509] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:182:plane 2B] using Y plane [PLANE:242:plane 4B]
<7> [109.904937] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 1571), size 0 -> 1571
<7> [109.905315] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> (1571 - 4037), size 0 -> 2466
<7> [109.905621] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.905913] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.906262] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [109.906532] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [109.906800] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.907067] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.907313] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [109.907542] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [109.907791] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 3564000 num active planes 2
<7> [109.908249] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 1920x1080->960x540 scaler_users = 0x80
<7> [109.908516] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:182:plane 2B] using Y plane [PLANE:242:plane 4B]
<7> [109.908796] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 1571), size 0 -> 1571
<7> [109.909017] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> (1571 - 4037), size 0 -> 2466
<7> [109.909221] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.909417] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.909602] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [109.909789] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [109.909964] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.910167] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.910343] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [109.910514] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [109.910685] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 3564000 num active planes 2
<7> [109.910928] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 3743 qgv_peak_bw: 48000
<7> [109.911169] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 3743 qgv_peak_bw: 48000
<7> [109.911390] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 3743
<7> [109.911638] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182
<7> [109.930011] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [109.930078] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:556] is removed
<7> [109.930125] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0
<7> [109.930424] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 1571) -> ( 0 - 0), size 1571 -> 0
<7> [109.930659] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (1571 - 4037) -> ( 0 - 0), size 2466 -> 0
<7> [109.930887] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.931149] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.931376] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.931593] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.931809] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.932056] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.932283] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.932482] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.932709] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [109.933014] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [109.933282] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [109.933546] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [109.953382] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [109.953663] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 1920x1080->960x540 scaler_users = 0x80
<7> [109.954213] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.954616] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.955004] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.955360] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [109.955666] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [109.956015] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [109.956575] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 1920x1080->960x540 scaler_users = 0x80
<7> [109.956902] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.957211] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.957476] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.957735] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [109.957997] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [109.958252] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [109.958712] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 1920x1080->960x540 scaler_users = 0x80
<7> [109.959005] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [109.959244] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [109.959459] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [109.959664] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [109.959872] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [109.960113] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [109.960411] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [109.960695] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [109.960967] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [109.961305] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182
<7> [109.980053] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [109.980137] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:556] is removed
<7> [109.980183] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0
<7> [109.980552] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [109.980844] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [109.981184] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.981474] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.981746] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [109.982077] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [109.982458] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [109.982818] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [109.983175] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.006170] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.006513] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 1920x1080->960x540 scaler_users = 0x80
<7> [110.007133] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.007568] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.007999] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.008394] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [110.008787] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [110.009293] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [110.009755] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [110.010222] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [110.010617] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [110.011084] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182
<7> [110.030086] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.030213] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:556] is removed
<7> [110.030282] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.030828] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.031323] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.031722] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.032156] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.032533] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.032947] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.033559] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.034142] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.034681] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.052733] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.052812] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 1920x1080->960x540 scaler_users = 0x80
<7> [110.052935] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.053042] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.053120] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.053197] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [110.053271] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [110.053357] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [110.053468] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [110.053572] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [110.053673] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [110.053791] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182
<7> [110.063186] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.063316] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:556] is removed
<7> [110.063381] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.063841] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.064289] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.064620] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.064939] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.065310] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.065645] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.066084] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.066472] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.066836] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.096297] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.096473] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: staged scaling request for 1920x1080->960x540 scaler_users = 0x80
<7> [110.096752] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.096950] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.097167] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.097337] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782
<7> [110.097500] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946
<7> [110.097686] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 4752000 num active planes 1
<7> [110.097910] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 4990 qgv_peak_bw: 48000
<7> [110.098121] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 4990 qgv_peak_bw: 48000
<7> [110.098310] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 4990
<7> [110.098525] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:182
<7> [110.113473] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.113589] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:182:plane 2B] because [FB:556] is removed
<7> [110.113653] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.114220] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:182:plane 2B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.114585] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.114904] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.115273] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] blocks 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.115557] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:182:plane 2B] min_ddb 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.115863] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.116293] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.116652] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.117034] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.131349] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.131748] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 1920x1080->960x540 scaler_users = 0x100
<7> [110.132377] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.132805] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.133240] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.133631] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [110.134028] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [110.134446] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1188000 num active planes 1
<7> [110.134970] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [110.135488] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [110.135956] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [110.136505] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212
<7> [110.146501] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.146592] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:556] is removed
<7> [110.146640] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.147072] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.147389] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.147678] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.147954] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.148245] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.148529] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.148889] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.149234] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.149550] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.164312] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.164611] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 1920x1080->960x540 scaler_users = 0x100
<7> [110.165156] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.165536] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.165883] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.166285] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [110.166621] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [110.166996] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [110.167447] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [110.167870] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [110.168287] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [110.168744] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212
<7> [110.179932] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.180072] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:556] is removed
<7> [110.180128] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.180539] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.180854] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.181191] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.181456] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.181709] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.181999] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.182342] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.182673] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.183011] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.197762] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.198095] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 1920x1080->960x540 scaler_users = 0x100
<7> [110.198657] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.199080] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.199443] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.199785] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [110.200167] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [110.200538] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [110.201027] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [110.201464] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [110.201875] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [110.202367] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212
<7> [110.213381] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.213479] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:556] is removed
<7> [110.213532] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.213940] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.214316] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.214634] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.214943] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.215255] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.215560] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.215959] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.216358] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.216710] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.230994] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.231322] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 1920x1080->960x540 scaler_users = 0x100
<7> [110.231844] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.232298] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.232655] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.233031] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782
<7> [110.233375] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946
<7> [110.233754] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 4752000 num active planes 1
<7> [110.234371] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 1920x1080->960x540 scaler_users = 0x100
<7> [110.234753] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.235104] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.235386] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.235663] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782
<7> [110.235928] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946
<7> [110.236232] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 4752000 num active planes 1
<7> [110.236597] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 4990 qgv_peak_bw: 48000
<7> [110.236924] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 4990 qgv_peak_bw: 48000
<7> [110.237251] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 4990
<7> [110.237600] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212
<7> [110.246010] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.246059] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:556] is removed
<7> [110.246085] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.246255] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.246389] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.246519] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.246646] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.246769] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.246916] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.247142] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.247340] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.247534] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.267825] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.268296] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 1920x1080->960x540 scaler_users = 0x100
<7> [110.268840] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.269390] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.269869] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.270322] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [110.270734] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [110.271187] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1188000 num active planes 1
<7> [110.271856] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 1920x1080->960x540 scaler_users = 0x100
<7> [110.272251] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.272600] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.272878] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.273184] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [110.273487] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [110.273755] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1188000 num active planes 1
<7> [110.274254] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 1920x1080->960x540 scaler_users = 0x100
<7> [110.274523] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.274755] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.274993] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.275218] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [110.275435] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [110.275649] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1188000 num active planes 1
<7> [110.275944] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [110.276271] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [110.276532] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [110.276846] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212
<7> [110.279265] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.279315] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:556] is removed
<7> [110.279342] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.279535] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.279682] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.279817] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.279945] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.280112] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.280246] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.280424] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.280596] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.280764] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.298810] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.298995] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 1920x1080->960x540 scaler_users = 0x100
<7> [110.299256] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:212:plane 3B] using Y plane [PLANE:242:plane 4B]
<7> [110.299519] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 1472), size 0 -> 1472
<7> [110.299719] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> (1472 - 4037), size 0 -> 2565
<7> [110.299917] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.300144] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.300322] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300
<7> [110.300501] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316
<7> [110.300678] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.300850] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.301030] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300
<7> [110.301191] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316
<7> [110.301375] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1782000 num active planes 2
<7> [110.301677] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 1920x1080->960x540 scaler_users = 0x100
<7> [110.301864] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:212:plane 3B] using Y plane [PLANE:242:plane 4B]
<7> [110.302077] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 1472), size 0 -> 1472
<7> [110.302232] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> (1472 - 4037), size 0 -> 2565
<7> [110.302383] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.302527] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.302666] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300
<7> [110.302802] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316
<7> [110.302937] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.303090] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.303222] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300
<7> [110.303351] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316
<7> [110.303482] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1782000 num active planes 2
<7> [110.303718] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 1920x1080->960x540 scaler_users = 0x100
<7> [110.303854] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:212:plane 3B] using Y plane [PLANE:242:plane 4B]
<7> [110.304004] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 1472), size 0 -> 1472
<7> [110.304125] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> (1472 - 4037), size 0 -> 2565
<7> [110.304246] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.304363] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.304477] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300
<7> [110.304587] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316
<7> [110.304695] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.304798] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.304903] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300
<7> [110.305019] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316
<7> [110.305126] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1782000 num active planes 2
<7> [110.305283] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1872 qgv_peak_bw: 48000
<7> [110.305433] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1872 qgv_peak_bw: 48000
<7> [110.305572] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1872
<7> [110.305741] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212
<7> [110.312612] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.312638] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:556] is removed
<7> [110.312657] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.312757] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 1472) -> ( 0 - 0), size 1472 -> 0
<7> [110.312830] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (1472 - 4037) -> ( 0 - 0), size 2565 -> 0
<7> [110.312900] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.312986] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.313057] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.313124] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.313191] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.313257] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.313323] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 16, 56, 181, 181, 341, 341, 341, 341, 30, 286, 300 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.313389] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 19, 63, 201, 201, 377, 377, 0, 0, 31, 316, 316 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.313466] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.313567] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.313664] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.313759] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.332704] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.332846] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 1920x1080->960x540 scaler_users = 0x100
<7> [110.333097] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:212:plane 3B] using Y plane [PLANE:242:plane 4B]
<7> [110.333337] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 1571), size 0 -> 1571
<7> [110.333514] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> (1571 - 4037), size 0 -> 2466
<7> [110.333683] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.333839] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.334001] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [110.334147] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [110.334293] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.334435] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.334576] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [110.334717] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [110.334874] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 3564000 num active planes 2
<7> [110.335112] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 3743 qgv_peak_bw: 48000
<7> [110.335308] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 3743 qgv_peak_bw: 48000
<7> [110.335500] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 3743
<7> [110.335729] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212
<7> [110.346206] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.346257] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:556] is removed
<7> [110.346291] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.346507] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 1571) -> ( 0 - 0), size 1571 -> 0
<7> [110.346673] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb (1571 - 4037) -> ( 0 - 0), size 2466 -> 0
<7> [110.346838] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.347016] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.347176] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.347331] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.347482] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.347636] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.347790] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.347941] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.348135] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.348352] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.348555] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.348760] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.374279] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.374524] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 1920x1080->960x540 scaler_users = 0x100
<7> [110.374901] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.375228] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.375484] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.375719] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [110.375949] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [110.376259] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [110.376580] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [110.376867] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [110.377149] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [110.377465] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212
<7> [110.379151] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.379213] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:556] is removed
<7> [110.379249] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.379494] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.379666] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.379827] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.379994] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.380143] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.380306] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.380509] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.380708] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.380900] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.405695] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.406043] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 1920x1080->960x540 scaler_users = 0x100
<7> [110.406574] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.407019] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.407391] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.407725] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [110.408084] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [110.408431] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [110.408876] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [110.409341] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [110.409729] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [110.410194] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212
<7> [110.412675] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.412758] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:556] is removed
<7> [110.412802] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.413210] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.413460] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.413669] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.413876] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.414108] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.414317] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.414581] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.414834] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.415086] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.439267] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.439611] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 1920x1080->960x540 scaler_users = 0x100
<7> [110.440222] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.440616] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.440952] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.441338] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [110.441647] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [110.441991] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [110.442403] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [110.442774] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [110.443174] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [110.443583] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212
<7> [110.445864] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.445957] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:556] is removed
<7> [110.446037] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.446298] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.446512] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.446712] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.446904] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.447115] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.447318] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.447569] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.447813] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.448059] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.479164] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.479344] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: staged scaling request for 1920x1080->960x540 scaler_users = 0x100
<7> [110.479603] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.479796] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.479990] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.480159] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782
<7> [110.480317] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946
<7> [110.480488] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 4752000 num active planes 1
<7> [110.480700] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 4990 qgv_peak_bw: 48000
<7> [110.480899] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 4990 qgv_peak_bw: 48000
<7> [110.481102] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 4990
<7> [110.481318] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:212
<7> [110.496849] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.497024] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:212:plane 3B] because [FB:556] is removed
<7> [110.497100] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.497629] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:212:plane 3B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.498028] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.498382] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.498722] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] blocks 94, 342,1117,1117,2109,2109,2109,2109, 108,1768, 1782 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.499053] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:212:plane 3B] min_ddb 105, 378,1230,1230,2321,2321, 0, 0, 109,1946, 1946 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.499391] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.499830] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.500275] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.500662] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.514533] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:560]
<7> [110.514994] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 1920x1080->960x540 scaler_users = 0x200
<7> [110.515550] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.515994] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.516373] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.516740] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [110.517115] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [110.517472] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1188000 num active planes 1
<7> [110.518106] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 1920x1080->960x540 scaler_users = 0x200
<7> [110.518427] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.518701] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.518989] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.519268] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [110.519522] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [110.519787] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1188000 num active planes 1
<7> [110.520181] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [110.520514] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [110.520840] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [110.521230] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:242
<7> [110.529489] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:560] from all active usage due to RMFB ioctl
<7> [110.529536] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:242:plane 4B] because [FB:560] is removed
<7> [110.529558] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.529706] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.529833] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.529973] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.530109] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.530247] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.530399] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.530593] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.530781] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.530968] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.547304] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.547577] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 1920x1080->960x540 scaler_users = 0x200
<7> [110.548110] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.548500] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.548844] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.549201] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [110.549516] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [110.549864] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [110.550445] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 1920x1080->960x540 scaler_users = 0x200
<7> [110.550793] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.551102] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.551357] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.551606] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [110.551866] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [110.552143] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [110.552565] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 1920x1080->960x540 scaler_users = 0x200
<7> [110.552826] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.553058] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.553263] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.553464] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [110.553652] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [110.553860] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [110.554155] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [110.554420] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [110.554681] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [110.554999] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:242
<7> [110.562777] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.562807] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:242:plane 4B] because [FB:556] is removed
<7> [110.562823] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.562956] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.563102] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.563203] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.563298] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.563391] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.563494] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.563632] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.563764] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.563892] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.580390] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.580602] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 1920x1080->960x540 scaler_users = 0x200
<7> [110.580938] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.581262] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.581535] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.581797] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [110.582068] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [110.582338] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [110.582678] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [110.583032] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [110.583333] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [110.583695] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:242
<7> [110.596322] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.596424] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:242:plane 4B] because [FB:556] is removed
<7> [110.596476] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.596824] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.597185] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.597475] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.597756] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.598056] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.598336] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.598704] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.599046] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.599369] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.618556] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.618903] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 1920x1080->960x540 scaler_users = 0x200
<7> [110.619555] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.620012] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.620429] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.620837] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [110.621302] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [110.621735] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1188000 num active planes 1
<7> [110.622334] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [110.622879] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [110.623440] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [110.624015] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:242
<7> [110.629301] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.629367] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:242:plane 4B] because [FB:556] is removed
<7> [110.629404] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.629683] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.629896] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.630116] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.630302] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.630474] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.630660] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.630902] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.631145] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.631358] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.656568] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.656914] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 1920x1080->960x540 scaler_users = 0x200
<7> [110.657516] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.657922] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.658388] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.658758] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [110.659144] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [110.659513] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [110.659972] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [110.660370] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [110.660755] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [110.661245] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:242
<7> [110.679774] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.679889] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:242:plane 4B] because [FB:556] is removed
<7> [110.680011] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.680444] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.680798] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.681221] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.681588] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.681934] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.682400] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.682912] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.683471] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.683995] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.706445] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.706778] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 1920x1080->960x540 scaler_users = 0x200
<7> [110.707433] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.707880] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.708343] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.708726] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [110.709098] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [110.709494] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [110.709996] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [110.710429] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [110.710837] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [110.711324] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:242
<7> [110.730191] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.730334] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:242:plane 4B] because [FB:556] is removed
<7> [110.730405] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.730925] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.731434] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.731813] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.732242] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.732598] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.733034] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.733551] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.734075] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.734570] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.756356] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.756692] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: staged scaling request for 1920x1080->960x540 scaler_users = 0x200
<7> [110.757321] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.757760] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.758205] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.758619] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [110.759024] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [110.759406] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [110.759883] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [110.760350] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [110.760767] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [110.761258] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:242
<7> [110.780155] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.780298] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:242:plane 4B] because [FB:556] is removed
<7> [110.780370] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.780895] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:242:plane 4B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.781413] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.781790] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.782220] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.782578] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:242:plane 4B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.783021] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.783544] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.784081] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.784577] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.797590] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.797916] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 1920x1080->960x540 scaler_users = 0x400
<7> [110.798516] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.798934] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.799364] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.799764] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [110.800119] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [110.800512] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1188000 num active planes 1
<7> [110.800900] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [110.801316] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [110.801702] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [110.802144] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:252
<7> [110.813030] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.813122] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:252:plane 5B] because [FB:556] is removed
<7> [110.813172] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.813501] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.813774] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.814141] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.814520] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.814807] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.815193] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.815605] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.815987] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.816375] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.830758] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.831122] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 1920x1080->960x540 scaler_users = 0x400
<7> [110.831644] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.832042] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.832416] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.832769] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [110.833106] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [110.833449] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [110.834019] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 1920x1080->960x540 scaler_users = 0x400
<7> [110.834335] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.834606] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.834859] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.835154] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [110.835400] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [110.835642] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [110.835987] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [110.836301] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [110.836596] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [110.836934] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:252
<7> [110.846489] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.846541] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:252:plane 5B] because [FB:556] is removed
<7> [110.846570] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.846797] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.847001] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.847172] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.847334] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.847494] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.847674] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.847908] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.848155] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.848360] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.864167] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.864426] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 1920x1080->960x540 scaler_users = 0x400
<7> [110.864827] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.865236] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.865638] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.865981] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [110.866337] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [110.866655] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [110.867301] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 1920x1080->960x540 scaler_users = 0x400
<7> [110.867607] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.867875] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.868193] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.868521] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [110.868751] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [110.869023] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [110.869509] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 1920x1080->960x540 scaler_users = 0x400
<7> [110.869755] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.869990] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.870247] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.870443] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [110.870634] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [110.870831] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [110.871141] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [110.871450] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [110.871693] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [110.872025] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:252
<7> [110.879580] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.879608] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:252:plane 5B] because [FB:556] is removed
<7> [110.879623] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.879742] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.879838] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.879929] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.880052] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.880176] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.880276] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.880402] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.880524] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.880644] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.900770] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.901097] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 1920x1080->960x540 scaler_users = 0x400
<7> [110.901577] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.901941] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.902351] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.902686] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [110.903037] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [110.903398] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1188000 num active planes 1
<7> [110.903814] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [110.904275] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [110.904656] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [110.905108] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:252
<7> [110.913070] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.913150] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:252:plane 5B] because [FB:556] is removed
<7> [110.913189] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.913473] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.913701] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.913910] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.914181] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.914393] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.914641] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.914986] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.915275] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.915532] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.939473] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.939810] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 1920x1080->960x540 scaler_users = 0x400
<7> [110.940495] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.940997] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.941350] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.941671] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [110.942015] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [110.942432] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [110.942849] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [110.943261] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [110.943673] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [110.944163] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:252
<7> [110.945875] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.945941] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:252:plane 5B] because [FB:556] is removed
<7> [110.946015] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.946302] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.946497] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.946677] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.946855] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.947058] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.947310] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [110.947547] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.947774] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.947998] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.972848] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [110.973230] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 1920x1080->960x540 scaler_users = 0x400
<7> [110.973811] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.974311] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.974723] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [110.975141] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [110.975497] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [110.975876] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [110.976368] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [110.976809] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [110.977231] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [110.977703] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:252
<7> [110.996812] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [110.996981] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:252:plane 5B] because [FB:556] is removed
<7> [110.997054] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.997612] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.998120] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.998524] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.998903] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.999346] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.999769] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [111.000368] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.000920] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.001519] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.023364] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:556]
<7> [111.023696] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: staged scaling request for 1920x1080->960x540 scaler_users = 0x400
<7> [111.024348] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.024775] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.025259] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [111.025598] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927
<7> [111.025926] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006
<7> [111.026345] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 2376000 num active planes 1
<7> [111.026766] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 2495 qgv_peak_bw: 48000
<7> [111.027172] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 2495 qgv_peak_bw: 48000
<7> [111.027524] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 2495
<7> [111.027957] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:252
<7> [111.046938] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:556] from all active usage due to RMFB ioctl
<7> [111.047140] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:252:plane 5B] because [FB:556] is removed
<7> [111.047237] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.047864] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:252:plane 5B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [111.048402] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.048869] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.049350] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] blocks 49, 177, 577, 577,1089,1089,1089,1089, 63, 913, 927 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.049810] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:252:plane 5B] min_ddb 55, 196, 636, 636,1199,1199, 0, 0, 64,1006, 1006 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.050345] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [111.051011] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.051646] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.052353] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<6> [111.066060] [IGT] kms_plane_scaling: finished subtest pipe-B, SUCCESS
<6> [111.068663] [IGT] kms_plane_scaling: starting dynamic subtest pipe-C
<7> [111.073191] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [111.076648] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [111.077621] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [111.078145] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [111.078983] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [111.079422] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [111.079856] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [111.080145] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [111.081915] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [111.086579] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [111.087392] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [111.087712] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [111.088273] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [111.088539] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [111.088796] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [111.092035] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [111.092859] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [111.093100] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [111.093552] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [111.093742] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [111.093924] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [111.095580] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:559]
<7> [111.096896] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:386:pipe C] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000
<7> [111.097083] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000
<7> [111.097234] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:386:pipe C] hw max bpp: 36, pipe bpp: 36, dithering: 0
<7> [111.097382] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:386:pipe C]
<7> [111.097524] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.enable (expected yes, found no)
<7> [111.097661] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected yes, found no)
<7> [111.097791] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in cpu_transcoder (expected 1, found -1)
<7> [111.097919] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in lane_count (expected 4, found 0)
<7> [111.098059] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in dp_m_n (expected tu 64 data 5190451/8388608 link 288358/524288, found tu 0, data 0/0 link 0/0)
<7> [111.098176] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in output_types (expected 0x00000080, found 0x00000000)
<7> [111.098289] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [111.098396] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)
<7> [111.098502] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2200, found 0)
<7> [111.098605] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)
<7> [111.098708] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2200, found 0)
<7> [111.098812] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)
<7> [111.098914] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2052, found 0)
<7> [111.099021] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)
<7> [111.099115] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)
<7> [111.099209] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)
<7> [111.099298] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)
<7> [111.099385] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)
<7> [111.099474] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)
<7> [111.099561] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)
<7> [111.099648] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2200, found 0)
<7> [111.099736] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)
<7> [111.099822] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2200, found 0)
<7> [111.099910] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)
<7> [111.100004] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2052, found 0)
<7> [111.100092] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)
<7> [111.100179] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)
<7> [111.100266] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)
<7> [111.100354] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)
<7> [111.100440] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)
<7> [111.100527] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)
<7> [111.100613] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [111.100698] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)
<7> [111.100784] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)
<7> [111.100870] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in enhanced_framing (expected yes, found no)
<7> [111.100961] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pipe_bpp (expected 36, found 0)
<7> [111.101049] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 148500, found 0)
<7> [111.101135] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 148500, found 0)
<7> [111.101223] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in port_clock (expected 270000, found 0)
<7> [111.101310] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset
<7> [111.101398] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.enable (expected no, found yes)
<7> [111.101489] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.active (expected no, found yes)
<7> [111.101574] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in cpu_transcoder (expected -1, found 2)
<7> [111.101662] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in lane_count (expected 0, found 4)
<7> [111.101750] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 5190451/8388608 link 288358/524288)
<7> [111.101839] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in output_types (expected 0x00000000, found 0x00000080)
<7> [111.101925] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [111.102026] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)
<7> [111.102121] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2200)
<7> [111.102213] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)
<7> [111.102303] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2200)
<7> [111.102391] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)
<7> [111.102480] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2052)
<7> [111.102568] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)
<7> [111.102656] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)
<7> [111.102741] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)
<7> [111.102828] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)
<7> [111.102913] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)
<7> [111.103009] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)
<7> [111.103096] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)
<7> [111.103182] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2200)
<7> [111.103271] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)
<7> [111.103359] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2200)
<7> [111.103446] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)
<7> [111.103530] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2052)
<7> [111.103615] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)
<7> [111.103701] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)
<7> [111.103786] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)
<7> [111.103870] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)
<7> [111.103962] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)
<7> [111.104051] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)
<7> [111.104138] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [111.104224] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)
<7> [111.104310] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)
<7> [111.104396] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in enhanced_framing (expected no, found yes)
<7> [111.104483] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in dpll_hw_state
<7> [111.104568] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [111.104654] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [111.104741] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state:
<7> [111.104828] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000
<7> [111.104914] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [111.105008] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000
<7> [111.105094] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000
<7> [111.105179] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000
<7> [111.105266] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000
<7> [111.105351] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000
<7> [111.105437] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000
<7> [111.105526] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000
<7> [111.105614] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000
<7> [111.105701] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000
<7> [111.105789] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000
<7> [111.105877] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000
<7> [111.105994] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00
<7> [111.106082] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [111.106170] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [111.106258] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state:
<7> [111.106345] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000
<7> [111.106432] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [111.106521] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[0] = 0x308c
<7> [111.106609] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[1] = 0x2110
<7> [111.106695] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[2] = 0xcc9c
<7> [111.106781] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[3] = 0xbfc1
<7> [111.106867] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[4] = 0x4b9a
<7> [111.106958] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[5] = 0x3f81
<7> [111.107045] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[6] = 0x2000
<7> [111.107131] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[7] = 0x0001
<7> [111.107218] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[8] = 0x5000
<7> [111.107303] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[9] = 0x0000
<7> [111.107390] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000
<7> [111.107475] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00
<7> [111.107563] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in pipe_bpp (expected 0, found 36)
<7> [111.107651] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 148500)
<7> [111.107738] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 148500)
<7> [111.107825] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in port_clock (expected 0, found 270000)
<7> [111.107911] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:386:pipe C] fastset requirement not met, forcing full modeset
<7> [111.108007] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 2
<7> [111.108108] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:386:pipe C] scaler_user index 2.12: staged scaling request for 1920x1080->960x540 scaler_users = 0x1000
<7> [111.108214] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xd (total dbuf slices 0xf), mbus joined? yes->no
<7> [111.108289] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x4
<7> [111.108360] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:386:pipe C] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x2 -> 0x4
<7> [111.108434] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb (4037 - 4096) -> ( 0 - 0), size 59 -> 0
<7> [111.108506] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:270:plane 1C] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [111.108577] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:380:cursor C] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59
<7> [111.108645] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:270:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.108712] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:270:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [111.108779] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:270:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [111.108844] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:270:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [111.108923] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:386:pipe C] data rate 1188000 num active planes 1
<7> [111.109032] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [111.109127] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [111.109223] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [111.109319] xe 0000:03:00.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:268:pipe B] min cdclk: 297000 kHz -> 0 kHz
<7> [111.109413] xe 0000:03:00.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:386:pipe C] min cdclk: 0 kHz -> 297000 kHz
<7> [111.109516] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 74250 kHz -> 18563 kHz
<7> [111.109625] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:386:pipe C] allocated TC PLL 2
<7> [111.109717] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:386:pipe C] reserving TC PLL 2
<7> [111.109806] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:386:pipe C] attached scaler id 2.0 to PLANE:270
<7> [111.109882] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [modeset]
<7> [111.109988] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [NOFB], visible: no
<7> [111.110085] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no
<7> [111.110176] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no
<7> [111.110268] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no
<7> [111.110360] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no
<7> [111.110451] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no
<7> [111.110540] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:386:pipe C] enable: yes [modeset]
<7> [111.110630] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB
<7> [111.110720] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: C, pipe bpp: 36, dithering: 0
<7> [111.110807] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [111.110895] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [111.110992] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [111.111080] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [111.111168] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64
<7> [111.111256] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [111.111344] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled
<7> [111.111432] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [111.111519] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [111.111605] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [111.111692] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0
<7> [111.111780] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00
<7> [111.111868] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11
<7> [111.111959] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00
<7> [111.112046] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [111.112133] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [111.112219] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36
<7> [111.112306] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125
<7> [111.112394] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [111.112485] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [111.112577] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [111.112666] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [111.112756] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [111.112846] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [111.112934] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 297000
<7> [111.113035] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0
<7> [111.113122] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x1000, scaler_id: -1, scaling_filter: 0
<7> [111.113211] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [111.113299] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [111.113388] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [111.113475] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:
<7> [111.113562] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000
<7> [111.113649] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [111.113738] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c
<7> [111.113824] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110
<7> [111.113913] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c
<7> [111.114007] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1
<7> [111.114094] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a
<7> [111.114181] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81
<7> [111.114266] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000
<7> [111.114350] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001
<7> [111.114436] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000
<7> [111.114522] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000
<7> [111.114609] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000
<7> [111.114696] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00
<7> [111.114781] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [111.114867] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [111.114958] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [111.115044] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.115130] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.115215] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.115299] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [111.115385] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [111.115470] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.115556] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.115642] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.115729] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [111.115816] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [111.115905] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:270:plane 1C] fb: [FB:559] 1920x1080 format = RG16 little-endian (0x36314752) modifier = 0x0, visible: yes
<7> [111.116001] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0
<7> [111.116088] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 960x540+0+0
<7> [111.116177] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:300:plane 2C] fb: [NOFB], visible: no
<7> [111.116262] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:330:plane 3C] fb: [NOFB], visible: no
<7> [111.116350] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:360:plane 4C] fb: [NOFB], visible: no
<7> [111.116437] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:370:plane 5C] fb: [NOFB], visible: no
<7> [111.116523] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:380:cursor C] fb: [NOFB], visible: no
<7> [111.117137] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [111.117278] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x82000000)
<7> [111.117375] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G] Disable audio codec on [CRTC:268:pipe B]
<7> [111.146054] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [111.146370] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe B
<7> [111.168809] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x2, on? 1) for [CRTC:268:pipe B]
<7> [111.171124] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2
<7> [111.171315] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<6> [111.171803] pcieport 0000:00:01.0: PME: Spurious native interrupt!
<7> [111.171766] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F]
<7> [111.172109] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A]
<7> [111.172451] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B]
<7> [111.172836] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C]
<7> [111.173156] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D]
<7> [111.173460] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G]
<7> [111.173749] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A]
<7> [111.174037] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B]
<7> [111.174291] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C]
<7> [111.174544] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D]
<7> [111.174795] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H]
<7> [111.175050] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I]
<7> [111.175283] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A]
<7> [111.175509] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B]
<7> [111.175734] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C]
<7> [111.175959] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D]
<7> [111.176174] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:507:DP-1]
<7> [111.176600] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:520:HDMI-A-1]
<7> [111.176803] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:534:HDMI-A-2]
<7> [111.177234] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:538:HDMI-A-3]
<7> [111.177436] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:542:DP-3]
<7> [111.177827] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:550:HDMI-A-4]
<7> [111.178046] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)
<7> [111.178422] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)
<7> [111.178604] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x4, on? 0) for [CRTC:386:pipe C]
<7> [111.178816] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2
<7> [111.184653] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01
<7> [111.191802] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [111.193293] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01
<7> [111.194016] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a
<7> [111.195839] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [111.196500] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1
<7> [111.202992] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Clock recovery OK
<7> [111.203429] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3
<7> [111.209995] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful
<7> [111.210475] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4
<7> [111.212000] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe C
<7> [111.229391] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xd
<7> [111.230354] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [111.231151] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x8a000000)
<7> [111.232000] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]
<7> [111.233100] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G] Enable audio codec on [CRTC:386:pipe C], 40 bytes ELD
<7> [111.246659] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:526:DP-2]
<7> [111.247401] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7> [111.248025] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:386:pipe C]
<7> [111.254191] xe 0000:03:00.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe C
<7> [111.254795] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:559] from all active usage due to RMFB ioctl
<7> [111.254923] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:270:plane 1C] because [FB:559] is removed
<7> [111.255065] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:386:pipe C] scaler_user index 2.12: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.255821] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:270:plane 1C] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0
<7> [111.256431] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:270:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.256807] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:270:plane 1C] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.257213] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:270:plane 1C] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.257528] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:270:plane 1C] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.257883] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:386:pipe C] data rate 0 num active planes 0
<7> [111.258366] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.258770] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.259183] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.264794] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:560]
<7> [111.265085] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:386:pipe C] scaler_user index 2.13: staged scaling request for 1920x1080->960x540 scaler_users = 0x2000
<7> [111.265412] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:300:plane 2C] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [111.265649] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:300:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.265868] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:300:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [111.266119] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:300:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [111.266315] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:300:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [111.266520] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:386:pipe C] data rate 1188000 num active planes 1
<7> [111.266779] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [111.267054] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [111.267285] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [111.267546] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:386:pipe C] attached scaler id 2.0 to PLANE:300
<7> [111.280371] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:560] from all active usage due to RMFB ioctl
<7> [111.280461] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:300:plane 2C] because [FB:560] is removed
<7> [111.280509] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:386:pipe C] scaler_user index 2.13: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.280879] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:300:plane 2C] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0
<7> [111.281239] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:300:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.281541] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:300:plane 2C] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.281823] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:300:plane 2C] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.282115] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:300:plane 2C] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.282400] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:386:pipe C] data rate 0 num active planes 0
<7> [111.282763] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.283118] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.283449] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.298098] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:560]
<7> [111.298420] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:386:pipe C] scaler_user index 2.14: staged scaling request for 1920x1080->960x540 scaler_users = 0x4000
<7> [111.298880] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:330:plane 3C] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [111.299318] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:330:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.299652] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:330:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [111.299996] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:330:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [111.300309] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:330:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [111.300667] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:386:pipe C] data rate 1188000 num active planes 1
<7> [111.301120] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [111.301521] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [111.301916] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [111.302409] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:386:pipe C] attached scaler id 2.0 to PLANE:330
<7> [111.313233] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:560] from all active usage due to RMFB ioctl
<7> [111.313321] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:330:plane 3C] because [FB:560] is removed
<7> [111.313370] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:386:pipe C] scaler_user index 2.14: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.313655] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:330:plane 3C] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0
<7> [111.313902] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:330:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.314237] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:330:plane 3C] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.314248] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [111.314493] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:330:plane 3C] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.314745] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:330:plane 3C] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.315055] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:386:pipe C] data rate 0 num active planes 0
<7> [111.315413] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.315744] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.316096] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.331230] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:560]
<7> [111.331630] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:386:pipe C] scaler_user index 2.15: staged scaling request for 1920x1080->960x540 scaler_users = 0x8000
<7> [111.332180] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:360:plane 4C] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [111.332570] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:360:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.332950] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:360:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [111.333273] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:360:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [111.333574] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:360:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [111.333911] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:386:pipe C] data rate 1188000 num active planes 1
<7> [111.334539] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:386:pipe C] scaler_user index 2.15: staged scaling request for 1920x1080->960x540 scaler_users = 0x8000
<7> [111.334861] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:360:plane 4C] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [111.335182] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:360:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.335439] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:360:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [111.335697] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:360:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [111.335955] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:360:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [111.336202] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:386:pipe C] data rate 1188000 num active planes 1
<7> [111.336541] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [111.336856] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [111.337175] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [111.337530] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:386:pipe C] attached scaler id 2.0 to PLANE:360
<7> [111.346858] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:560] from all active usage due to RMFB ioctl
<7> [111.346908] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:360:plane 4C] because [FB:560] is removed
<7> [111.346959] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:386:pipe C] scaler_user index 2.15: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.347182] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:360:plane 4C] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0
<7> [111.347360] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:360:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.347522] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:360:plane 4C] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.347674] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:360:plane 4C] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.347821] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:360:plane 4C] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.347997] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:386:pipe C] data rate 0 num active planes 0
<7> [111.348205] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.348401] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.348595] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.364712] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:560]
<7> [111.365066] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:386:pipe C] scaler_user index 2.16: staged scaling request for 1920x1080->960x540 scaler_users = 0x10000
<7> [111.365547] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:370:plane 5C] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [111.365900] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:370:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.366286] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:370:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [111.366623] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:370:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [111.366982] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:370:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [111.367339] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:386:pipe C] data rate 1188000 num active planes 1
<7> [111.367946] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:386:pipe C] scaler_user index 2.16: staged scaling request for 1920x1080->960x540 scaler_users = 0x10000
<7> [111.368277] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:370:plane 5C] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [111.368548] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:370:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.368813] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:370:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [111.369100] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:370:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [111.369338] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:370:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [111.369589] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:386:pipe C] data rate 1188000 num active planes 1
<7> [111.370064] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:386:pipe C] scaler_user index 2.16: staged scaling request for 1920x1080->960x540 scaler_users = 0x10000
<7> [111.370322] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:370:plane 5C] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [111.370548] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:370:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.370769] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:370:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [111.371000] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:370:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [111.371201] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:370:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [111.371406] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:386:pipe C] data rate 1188000 num active planes 1
<7> [111.371692] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [111.371978] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [111.372242] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [111.372552] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:386:pipe C] attached scaler id 2.0 to PLANE:370
<7> [111.379816] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:560] from all active usage due to RMFB ioctl
<7> [111.379842] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:370:plane 5C] because [FB:560] is removed
<7> [111.379856] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:386:pipe C] scaler_user index 2.16: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.379992] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:370:plane 5C] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0
<7> [111.380087] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:370:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.380172] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:370:plane 5C] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.380257] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:370:plane 5C] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.380340] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:370:plane 5C] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.380431] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:386:pipe C] data rate 0 num active planes 0
<7> [111.380551] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.380667] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.380782] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<6> [111.397459] [IGT] kms_plane_scaling: finished subtest pipe-C, SUCCESS
<6> [111.398813] [IGT] kms_plane_scaling: starting dynamic subtest pipe-D
<7> [111.401716] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [111.405888] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [111.406843] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [111.407287] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [111.407904] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [111.408289] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [111.408630] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [111.412255] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [111.413035] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [111.413319] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [111.413946] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [111.413987] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [111.415303] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [111.415505] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [111.415982] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [111.419727] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [111.420677] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [111.420846] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [111.421252] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [111.421385] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [111.421509] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [111.422695] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:560]
<7> [111.423585] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:504:pipe D] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000
<7> [111.423700] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000
<7> [111.423812] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:504:pipe D] hw max bpp: 36, pipe bpp: 36, dithering: 0
<7> [111.423924] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:504:pipe D]
<7> [111.424054] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.enable (expected yes, found no)
<7> [111.424165] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.active (expected yes, found no)
<7> [111.424279] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in cpu_transcoder (expected 2, found -1)
<7> [111.424388] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in lane_count (expected 4, found 0)
<7> [111.424492] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in dp_m_n (expected tu 64 data 5190451/8388608 link 288358/524288, found tu 0, data 0/0 link 0/0)
<7> [111.424595] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in output_types (expected 0x00000080, found 0x00000000)
<7> [111.424697] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [111.424794] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)
<7> [111.424888] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2200, found 0)
<7> [111.424989] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)
<7> [111.425085] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2200, found 0)
<7> [111.425173] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)
<7> [111.425261] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2052, found 0)
<7> [111.425349] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)
<7> [111.425436] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)
<7> [111.425523] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)
<7> [111.425610] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)
<7> [111.425697] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)
<7> [111.425785] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)
<7> [111.425872] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)
<7> [111.425975] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2200, found 0)
<7> [111.426061] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)
<7> [111.426140] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2200, found 0)
<7> [111.426221] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)
<7> [111.426303] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2052, found 0)
<7> [111.426391] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)
<7> [111.426478] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)
<7> [111.426565] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)
<7> [111.426650] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)
<7> [111.426740] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)
<7> [111.426828] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)
<7> [111.426916] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [111.427017] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)
<7> [111.427105] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)
<7> [111.427192] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in enhanced_framing (expected yes, found no)
<7> [111.427280] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in pipe_bpp (expected 36, found 0)
<7> [111.427367] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 148500, found 0)
<7> [111.427455] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 148500, found 0)
<7> [111.427542] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:386:pipe C] fastset requirement not met in port_clock (expected 270000, found 0)
<7> [111.427629] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:386:pipe C] fastset requirement not met, forcing full modeset
<7> [111.427715] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.enable (expected no, found yes)
<7> [111.427801] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.active (expected no, found yes)
<7> [111.427887] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in cpu_transcoder (expected -1, found 3)
<7> [111.427980] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in lane_count (expected 0, found 4)
<7> [111.428066] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 5190451/8388608 link 288358/524288)
<7> [111.428152] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in output_types (expected 0x00000000, found 0x00000080)
<7> [111.428238] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [111.428325] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)
<7> [111.428412] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2200)
<7> [111.428499] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)
<7> [111.428587] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2200)
<7> [111.428675] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)
<7> [111.428760] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2052)
<7> [111.428847] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)
<7> [111.428939] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)
<7> [111.429026] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)
<7> [111.429112] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)
<7> [111.429199] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)
<7> [111.429287] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)
<7> [111.429375] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)
<7> [111.429463] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2200)
<7> [111.429548] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)
<7> [111.429635] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2200)
<7> [111.429721] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)
<7> [111.429808] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2052)
<7> [111.429894] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)
<7> [111.429987] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)
<7> [111.430073] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)
<7> [111.430157] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)
<7> [111.430242] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)
<7> [111.430328] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)
<7> [111.430413] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [111.430499] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)
<7> [111.430585] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)
<7> [111.430669] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in enhanced_framing (expected no, found yes)
<7> [111.430754] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in pipe_bpp (expected 0, found 36)
<7> [111.430839] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 148500)
<7> [111.430954] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 148500)
<7> [111.431044] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in port_clock (expected 0, found 270000)
<7> [111.431133] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:504:pipe D] fastset requirement not met, forcing full modeset
<7> [111.431222] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:386:pipe C] releasing TC PLL 2
<7> [111.431322] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:504:pipe D] scaler_user index 3.18: staged scaling request for 1920x1080->960x540 scaler_users = 0x40000
<7> [111.431415] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xd -> 0x3 (total dbuf slices 0xf), mbus joined? no->no
<7> [111.431490] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:386:pipe C] dbuf slices 0xc -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x4 -> 0x8
<7> [111.431563] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:504:pipe D] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x4 -> 0x8
<7> [111.431638] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:380:cursor C] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0
<7> [111.431707] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:388:plane 1D] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [111.431773] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:498:cursor D] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59
<7> [111.431839] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:388:plane 1D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.431903] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:388:plane 1D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [111.431979] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:388:plane 1D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [111.432044] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:388:plane 1D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [111.432120] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:504:pipe D] data rate 1188000 num active planes 1
<7> [111.432220] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [111.432317] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [111.432411] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [111.432517] xe 0000:03:00.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:386:pipe C] min cdclk: 297000 kHz -> 0 kHz
<7> [111.432613] xe 0000:03:00.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:504:pipe D] min cdclk: 0 kHz -> 297000 kHz
<7> [111.432732] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:504:pipe D] allocated TC PLL 2
<7> [111.432825] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:504:pipe D] reserving TC PLL 2
<7> [111.432915] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:504:pipe D] attached scaler id 3.0 to PLANE:388
<7> [111.433003] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:386:pipe C] enable: no [modeset]
<7> [111.433102] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:270:plane 1C] fb: [NOFB], visible: no
<7> [111.433197] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:300:plane 2C] fb: [NOFB], visible: no
<7> [111.433292] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:330:plane 3C] fb: [NOFB], visible: no
<7> [111.433384] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:360:plane 4C] fb: [NOFB], visible: no
<7> [111.433475] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:370:plane 5C] fb: [NOFB], visible: no
<7> [111.433564] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:380:cursor C] fb: [NOFB], visible: no
<7> [111.433654] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:504:pipe D] enable: yes [modeset]
<7> [111.433744] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB
<7> [111.433833] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: D, pipe bpp: 36, dithering: 0
<7> [111.433922] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [111.434022] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [111.434112] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [111.434198] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [111.434286] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64
<7> [111.434373] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [111.434461] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled
<7> [111.434549] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [111.434637] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [111.434724] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [111.434812] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0
<7> [111.434899] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00
<7> [111.434995] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11
<7> [111.435083] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00
<7> [111.435172] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [111.435259] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [111.435348] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36
<7> [111.435437] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125
<7> [111.435525] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [111.435613] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [111.435700] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [111.435788] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [111.435876] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [111.435969] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [111.436057] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 297000
<7> [111.436142] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0
<7> [111.436228] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x40000, scaler_id: -1, scaling_filter: 0
<7> [111.436315] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [111.436401] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [111.436488] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [111.436573] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:
<7> [111.436658] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000
<7> [111.436747] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [111.436833] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c
<7> [111.436919] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110
<7> [111.437018] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c
<7> [111.437106] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1
<7> [111.437196] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a
<7> [111.437284] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81
<7> [111.437373] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000
<7> [111.437461] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001
<7> [111.437548] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000
<7> [111.437634] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000
<7> [111.437719] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000
<7> [111.437805] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00
<7> [111.437890] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [111.437982] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [111.438069] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [111.438157] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.438247] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.438336] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.438425] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [111.438512] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [111.438600] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.438687] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.438774] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.438865] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [111.438961] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [111.439049] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:388:plane 1D] fb: [FB:560] 1920x1080 format = RG16 little-endian (0x36314752) modifier = 0x0, visible: yes
<7> [111.439138] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0
<7> [111.439223] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 960x540+0+0
<7> [111.439312] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:418:plane 2D] fb: [NOFB], visible: no
<7> [111.439398] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:448:plane 3D] fb: [NOFB], visible: no
<7> [111.439485] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:478:plane 4D] fb: [NOFB], visible: no
<7> [111.439571] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:488:plane 5D] fb: [NOFB], visible: no
<7> [111.439659] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:498:cursor D] fb: [NOFB], visible: no
<7> [111.440255] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [111.440401] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x0a000000)
<7> [111.440500] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G] Disable audio codec on [CRTC:386:pipe C]
<7> [111.462796] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [111.463226] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe C
<7> [111.484774] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x4, on? 1) for [CRTC:386:pipe C]
<7> [111.487020] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2
<7> [111.487119] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7> [111.487589] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F]
<7> [111.487836] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A]
<7> [111.488102] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B]
<7> [111.488340] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C]
<7> [111.488601] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D]
<7> [111.488863] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G]
<7> [111.489088] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A]
<7> [111.489290] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B]
<7> [111.489640] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C]
<7> [111.489936] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D]
<7> [111.490136] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H]
<7> [111.490357] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I]
<7> [111.490740] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A]
<7> [111.490974] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B]
<7> [111.491171] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C]
<7> [111.491358] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D]
<7> [111.491538] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:507:DP-1]
<7> [111.491935] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:520:HDMI-A-1]
<7> [111.492109] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:534:HDMI-A-2]
<7> [111.492500] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:538:HDMI-A-3]
<7> [111.492674] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:542:DP-3]
<7> [111.493069] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:550:HDMI-A-4]
<7> [111.493269] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [111.493735] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)
<7> [111.493902] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x8, on? 0) for [CRTC:504:pipe D]
<7> [111.494094] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2
<7> [111.499889] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01
<7> [111.506383] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [111.507785] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01
<7> [111.508501] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a
<7> [111.510345] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [111.511178] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1
<7> [111.517856] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Clock recovery OK
<7> [111.518222] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3
<7> [111.524887] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful
<7> [111.525184] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4
<7> [111.526462] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe D
<6> [111.542210] xe 0000:03:00.0: [drm] PL2 disabled for channel 0, val 0x00000000
<7> [111.543669] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x3
<7> [111.544104] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [111.544217] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x2a000000)
<7> [111.544546] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:386:pipe C]
<7> [111.544828] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G] Enable audio codec on [CRTC:504:pipe D], 40 bytes ELD
<7> [111.547150] xe 0000:03:00.0: [drm:xe_hwmon_read [xe]] thermal data for group 0 val 0x28282628
<7> [111.547291] xe 0000:03:00.0: [drm:xe_hwmon_read [xe]] thermal data for group 1 val 0x28282729
<7> [111.557297] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7> [111.560695] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:526:DP-2]
<7> [111.561037] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:504:pipe D]
<7> [111.564276] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03061 0x28d10e72)
<7> [111.564883] xe 0000:03:00.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe D
<7> [111.565013] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:560] from all active usage due to RMFB ioctl
<7> [111.565046] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:388:plane 1D] because [FB:560] is removed
<7> [111.565067] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:504:pipe D] scaler_user index 3.18: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.565163] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:388:plane 1D] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0
<7> [111.565241] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:388:plane 1D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.565314] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:388:plane 1D] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.565386] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:388:plane 1D] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.565458] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:388:plane 1D] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.565541] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:504:pipe D] data rate 0 num active planes 0
<7> [111.565650] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.565754] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.565856] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.578505] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:560]
<7> [111.578720] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:504:pipe D] scaler_user index 3.19: staged scaling request for 1920x1080->960x540 scaler_users = 0x80000
<7> [111.579029] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:418:plane 2D] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [111.579241] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:418:plane 2D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.579450] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:418:plane 2D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [111.579653] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:418:plane 2D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [111.579850] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:418:plane 2D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [111.580110] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:504:pipe D] data rate 1188000 num active planes 1
<7> [111.580393] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [111.580679] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [111.580966] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [111.581306] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:504:pipe D] attached scaler id 3.0 to PLANE:418
<7> [111.594438] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:560] from all active usage due to RMFB ioctl
<7> [111.594555] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:418:plane 2D] because [FB:560] is removed
<7> [111.594617] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:504:pipe D] scaler_user index 3.19: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.595053] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:418:plane 2D] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0
<7> [111.595401] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:418:plane 2D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.595727] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:418:plane 2D] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.596060] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:418:plane 2D] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.596341] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:418:plane 2D] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.596660] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:504:pipe D] data rate 0 num active planes 0
<7> [111.597075] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.597445] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.597832] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.612377] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:560]
<7> [111.612719] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:504:pipe D] scaler_user index 3.20: staged scaling request for 1920x1080->960x540 scaler_users = 0x100000
<7> [111.613231] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:448:plane 3D] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [111.613578] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:448:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.613899] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:448:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [111.614256] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:448:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [111.614551] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:448:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [111.614865] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:504:pipe D] data rate 1188000 num active planes 1
<7> [111.615305] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [111.615700] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [111.616108] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [111.616535] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:504:pipe D] attached scaler id 3.0 to PLANE:448
<7> [111.628377] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:560] from all active usage due to RMFB ioctl
<7> [111.628499] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:448:plane 3D] because [FB:560] is removed
<7> [111.628562] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:504:pipe D] scaler_user index 3.20: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.629056] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:448:plane 3D] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0
<7> [111.629400] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:448:plane 3D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.629716] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:448:plane 3D] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.630045] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:448:plane 3D] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.630329] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:448:plane 3D] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.630628] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:504:pipe D] data rate 0 num active planes 0
<7> [111.631060] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.631416] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.631766] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.634017] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [111.645513] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:560]
<7> [111.645799] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:504:pipe D] scaler_user index 3.21: staged scaling request for 1920x1080->960x540 scaler_users = 0x200000
<7> [111.646233] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:478:plane 4D] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [111.646545] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:478:plane 4D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.646840] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:478:plane 4D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [111.647185] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:478:plane 4D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [111.647452] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:478:plane 4D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [111.647784] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:504:pipe D] data rate 1188000 num active planes 1
<7> [111.648183] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [111.648515] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [111.648834] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [111.649240] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:504:pipe D] attached scaler id 3.0 to PLANE:478
<7> [111.661382] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:560] from all active usage due to RMFB ioctl
<7> [111.661479] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:478:plane 4D] because [FB:560] is removed
<7> [111.661533] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:504:pipe D] scaler_user index 3.21: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.661991] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:478:plane 4D] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0
<7> [111.662339] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:478:plane 4D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.662654] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:478:plane 4D] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.662967] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:478:plane 4D] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.663242] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:478:plane 4D] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.663542] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:504:pipe D] data rate 0 num active planes 0
<7> [111.663951] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.664307] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.664665] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.679088] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:560]
<7> [111.679454] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:504:pipe D] scaler_user index 3.22: staged scaling request for 1920x1080->960x540 scaler_users = 0x400000
<7> [111.679996] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:488:plane 5D] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [111.680384] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:488:plane 5D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.680742] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:488:plane 5D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0
<7> [111.681120] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:488:plane 5D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528
<7> [111.681457] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:488:plane 5D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567
<7> [111.681821] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:504:pipe D] data rate 1188000 num active planes 1
<7> [111.682314] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [111.682723] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [111.683136] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [111.683577] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:504:pipe D] attached scaler id 3.0 to PLANE:488
<7> [111.694676] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:560] from all active usage due to RMFB ioctl
<7> [111.694775] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:488:plane 5D] because [FB:560] is removed
<7> [111.694827] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:504:pipe D] scaler_user index 3.22: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.695308] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:488:plane 5D] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0
<7> [111.695621] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:488:plane 5D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.695909] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:488:plane 5D] lines 3, 11, 36, 36, 68, 68, 68, 68, 0, 57, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.696232] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:488:plane 5D] blocks 28, 100, 325, 325, 613, 613, 613, 613, 42, 514, 528 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.696505] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:488:plane 5D] min_ddb 32, 111, 359, 359, 676, 676, 0, 0, 43, 567, 567 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.696800] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:504:pipe D] data rate 0 num active planes 0
<7> [111.697202] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.697550] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.697871] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<6> [111.712950] [IGT] kms_plane_scaling: finished subtest pipe-D, SUCCESS
<6> [111.714903] [IGT] kms_plane_scaling: finished subtest plane-downscale-factor-0-5-with-pixel-format, SUCCESS
<7> [111.716965] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [111.722007] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [111.722863] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [111.723310] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [111.723905] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [111.724263] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [111.724545] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [111.727905] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [111.728452] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [111.729085] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [111.729311] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [111.729758] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [111.729951] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [111.730134] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [111.730584] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [111.734630] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [111.735428] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [111.735601] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [111.736009] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [111.736158] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [111.736300] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [111.736784] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:561]
<7> [111.737644] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000
<7> [111.737787] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000
<7> [111.737929] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0
<7> [111.738079] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)
<7> [111.738202] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0
<7> [111.738336] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A]
<7> [111.738460] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B]
<7> [111.738572] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [111.738686] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [111.738799] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [111.738910] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [111.739026] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 5190451/8388608 link 288358/524288)
<7> [111.739136] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000080)
<7> [111.739237] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [111.739336] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)
<7> [111.739435] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2200)
<7> [111.739526] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)
<7> [111.739614] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2200)
<7> [111.739705] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)
<7> [111.739794] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2052)
<7> [111.739883] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)
<7> [111.739977] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)
<7> [111.740062] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)
<7> [111.740147] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)
<7> [111.740233] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)
<7> [111.740321] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)
<7> [111.740408] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)
<7> [111.740495] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2200)
<7> [111.740582] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)
<7> [111.740668] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2200)
<7> [111.740762] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)
<7> [111.740853] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2052)
<7> [111.740950] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)
<7> [111.741040] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)
<7> [111.741130] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)
<7> [111.741219] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)
<7> [111.741307] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)
<7> [111.741395] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)
<7> [111.741483] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [111.741570] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)
<7> [111.741659] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)
<7> [111.741747] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)
<7> [111.741834] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 36)
<7> [111.741929] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 148500)
<7> [111.742018] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 148500)
<7> [111.742106] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 0, found 270000)
<7> [111.742193] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset
<7> [111.742281] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.enable (expected no, found yes)
<7> [111.742370] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes)
<7> [111.742458] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1)
<7> [111.742545] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in lane_count (expected 0, found 4)
<7> [111.742632] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)
<7> [111.742719] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [111.742807] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)
<7> [111.742896] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2200)
<7> [111.742995] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)
<7> [111.743082] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2200)
<7> [111.743170] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)
<7> [111.743258] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2052)
<7> [111.743346] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)
<7> [111.743433] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)
<7> [111.743519] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)
<7> [111.743606] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)
<7> [111.743694] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)
<7> [111.743785] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)
<7> [111.743873] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)
<7> [111.743966] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2200)
<7> [111.744054] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)
<7> [111.744139] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2200)
<7> [111.744226] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)
<7> [111.744312] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2052)
<7> [111.744399] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)
<7> [111.744486] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)
<7> [111.744571] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)
<7> [111.744657] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)
<7> [111.744745] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)
<7> [111.744831] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)
<7> [111.744921] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [111.745009] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)
<7> [111.745096] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)
<7> [111.745182] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in has_hdmi_sink (expected no, found yes)
<7> [111.745270] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in has_infoframe (expected no, found yes)
<7> [111.745360] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in dpll_hw_state
<7> [111.745445] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [111.745530] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [111.745617] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state:
<7> [111.745702] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000
<7> [111.745789] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [111.745874] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[0] = 0x308c
<7> [111.745967] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[1] = 0x2110
<7> [111.746052] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[2] = 0xcc9c
<7> [111.746137] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[3] = 0xbfc1
<7> [111.746221] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[4] = 0x4b9a
<7> [111.746306] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[5] = 0x3f81
<7> [111.746398] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[6] = 0x2000
<7> [111.746490] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[7] = 0x0001
<7> [111.746578] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[8] = 0x5000
<7> [111.746665] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[9] = 0x0000
<7> [111.746752] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000
<7> [111.746837] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00
<7> [111.746928] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [111.747016] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [111.747103] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state:
<7> [111.747191] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000
<7> [111.747280] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [111.747366] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[0] = 0x40e8
<7> [111.747453] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[1] = 0x7d20
<7> [111.747539] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[2] = 0x0a06
<7> [111.747627] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[3] = 0x8f1c
<7> [111.747713] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[4] = 0x0000
<7> [111.747802] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[5] = 0x0000
<7> [111.747889] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[6] = 0x2200
<7> [111.747983] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[7] = 0xffff
<7> [111.748071] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[8] = 0x0400
<7> [111.748158] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[9] = 0x0000
<7> [111.748245] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0001
<7> [111.748331] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00
<7> [111.748425] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 36)
<7> [111.748516] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 148500)
<7> [111.748608] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 148500)
<7> [111.748698] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in port_clock (expected 0, found 222750)
<7> [111.748786] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000071)
<7> [111.748874] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in infoframes.gcp (expected 0x00000000, found 0x00000006)
<7> [111.748970] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in avi infoframe
<7> [111.749057] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [111.749145] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [111.749235] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13
<7> [111.749236] xe 0000:03:00.0: colorspace: RGB
<7> [111.749238] xe 0000:03:00.0: scan mode: Underscan
<7> [111.749239] xe 0000:03:00.0: colorimetry: No Data
<7> [111.749241] xe 0000:03:00.0: picture aspect: 16:9
<7> [111.749242] xe 0000:03:00.0: active aspect: Same as Picture
<7> [111.749243] xe 0000:03:00.0: itc: No Data
<7> [111.749245] xe 0000:03:00.0: extended colorimetry: xvYCC 601
<7> [111.749246] xe 0000:03:00.0: quantization range: Default
<7> [111.749247] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling
<7> [111.749249] xe 0000:03:00.0: video code: 16
<7> [111.749250] xe 0000:03:00.0: ycc quantization range: Full
<7> [111.749251] xe 0000:03:00.0: hdmi content type: Graphics
<7> [111.749253] xe 0000:03:00.0: pixel repeat: 0
<7> [111.749254] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0
<7> [111.749256] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in spd infoframe
<7> [111.749343] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [111.749431] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [111.749519] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25
<7> [111.749521] xe 0000:03:00.0: vendor: Intel
<7> [111.749522] xe 0000:03:00.0: product: Discrete gfx
<7> [111.749524] xe 0000:03:00.0: source device information: PC General (0x9)
<7> [111.749525] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hdmi infoframe
<7> [111.749613] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [111.749700] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [111.749787] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4
<7> [111.749789] xe 0000:03:00.0: empty frame
<7> [111.749790] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset
<7> [111.749879] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.enable (expected yes, found no)
<7> [111.749977] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.active (expected yes, found no)
<7> [111.750066] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in cpu_transcoder (expected 3, found -1)
<7> [111.750154] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in lane_count (expected 4, found 0)
<7> [111.750242] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in dp_m_n (expected tu 64 data 5190451/8388608 link 288358/524288, found tu 0, data 0/0 link 0/0)
<7> [111.750330] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in output_types (expected 0x00000080, found 0x00000000)
<7> [111.750417] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [111.750504] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)
<7> [111.750590] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2200, found 0)
<7> [111.750677] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)
<7> [111.750764] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2200, found 0)
<7> [111.750851] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)
<7> [111.750942] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2052, found 0)
<7> [111.751031] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)
<7> [111.751116] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)
<7> [111.751204] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)
<7> [111.751290] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)
<7> [111.751377] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)
<7> [111.751462] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)
<7> [111.751549] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)
<7> [111.751638] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2200, found 0)
<7> [111.751725] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)
<7> [111.751812] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2200, found 0)
<7> [111.751901] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)
<7> [111.751998] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2052, found 0)
<7> [111.752085] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)
<7> [111.752172] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)
<7> [111.752258] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)
<7> [111.752345] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)
<7> [111.752431] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)
<7> [111.752519] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)
<7> [111.752606] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [111.752692] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)
<7> [111.752777] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)
<7> [111.752863] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in enhanced_framing (expected yes, found no)
<7> [111.752958] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in pipe_bpp (expected 36, found 0)
<7> [111.753045] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 148500, found 0)
<7> [111.753133] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 148500, found 0)
<7> [111.753219] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:504:pipe D] fastset requirement not met in port_clock (expected 270000, found 0)
<7> [111.753307] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:504:pipe D] fastset requirement not met, forcing full modeset
<7> [111.753394] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:504:pipe D] releasing TC PLL 2
<7> [111.753512] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x3 -> 0xf (total dbuf slices 0xf), mbus joined? no->no
<7> [111.753591] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x8 -> 0x3
<7> [111.753667] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x8 -> 0x3
<7> [111.753741] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:504:pipe D] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x8 -> 0x3
<7> [111.753815] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [111.753884] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59
<7> [111.753962] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.754028] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.754095] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [111.754161] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [111.754227] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [111.754294] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59
<7> [111.754360] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.754425] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.754492] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [111.754558] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [111.754629] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:498:cursor D] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0
<7> [111.754711] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 594000 num active planes 1
<7> [111.754811] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 594000 num active planes 1
<7> [111.754909] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [111.755019] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [111.755115] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [111.755221] xe 0000:03:00.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:150:pipe A] min cdclk: 0 kHz -> 192000 kHz
<7> [111.755317] xe 0000:03:00.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:268:pipe B] min cdclk: 0 kHz -> 192000 kHz
<7> [111.755412] xe 0000:03:00.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:504:pipe D] min cdclk: 297000 kHz -> 0 kHz
<7> [111.755529] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated TC PLL 2
<7> [111.755621] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving TC PLL 2
<7> [111.755714] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated TC PLL 3
<7> [111.755801] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving TC PLL 3
<7> [111.755888] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset]
<7> [111.755995] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB
<7> [111.756093] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0
<7> [111.756189] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [111.756283] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [111.756375] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [111.756466] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [111.756557] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64
<7> [111.756647] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [111.756737] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled
<7> [111.756826] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [111.756918] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [111.757008] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [111.757097] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0
<7> [111.757185] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00
<7> [111.757273] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11
<7> [111.757362] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00
<7> [111.757450] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [111.757538] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [111.757626] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36
<7> [111.757714] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125
<7> [111.757801] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [111.757890] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [111.758051] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [111.758141] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [111.758231] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [111.758318] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [111.758405] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000
<7> [111.758493] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0
<7> [111.758580] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [111.758673] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [111.758764] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [111.758855] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [111.758949] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:
<7> [111.759037] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000
<7> [111.759124] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [111.759212] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c
<7> [111.759299] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110
<7> [111.759385] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c
<7> [111.759473] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1
<7> [111.759559] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a
<7> [111.759645] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81
<7> [111.759729] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000
<7> [111.759813] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001
<7> [111.759897] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000
<7> [111.759991] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000
<7> [111.760076] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000
<7> [111.760161] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00
<7> [111.760248] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [111.760334] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [111.760419] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [111.760504] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.760589] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.760677] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.760770] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [111.760860] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [111.760954] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.761043] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.761129] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.761216] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [111.761303] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [111.761390] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [111.761481] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [111.761567] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0
<7> [111.761654] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no
<7> [111.761741] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no
<7> [111.761828] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no
<7> [111.761917] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no
<7> [111.762004] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no
<7> [111.762092] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset]
<7> [111.762179] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB
<7> [111.762266] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0
<7> [111.762352] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [111.762438] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [111.762524] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [111.762611] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [111.762697] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71
<7> [111.762783] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6
<7> [111.762869] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13
<7> [111.762870] xe 0000:03:00.0: colorspace: RGB
<7> [111.762872] xe 0000:03:00.0: scan mode: Underscan
<7> [111.762873] xe 0000:03:00.0: colorimetry: No Data
<7> [111.762875] xe 0000:03:00.0: picture aspect: 16:9
<7> [111.762876] xe 0000:03:00.0: active aspect: Same as Picture
<7> [111.762877] xe 0000:03:00.0: itc: No Data
<7> [111.762879] xe 0000:03:00.0: extended colorimetry: xvYCC 601
<7> [111.762880] xe 0000:03:00.0: quantization range: Default
<7> [111.762882] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling
<7> [111.762883] xe 0000:03:00.0: video code: 16
<7> [111.762884] xe 0000:03:00.0: ycc quantization range: Full
<7> [111.762886] xe 0000:03:00.0: hdmi content type: Graphics
<7> [111.762887] xe 0000:03:00.0: pixel repeat: 0
<7> [111.762888] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0
<7> [111.762890] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25
<7> [111.762892] xe 0000:03:00.0: vendor: Intel
<7> [111.762893] xe 0000:03:00.0: product: Discrete gfx
<7> [111.762894] xe 0000:03:00.0: source device information: PC General (0x9)
<7> [111.762896] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4
<7> [111.762897] xe 0000:03:00.0: empty frame
<7> [111.762899] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00
<7> [111.762995] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51
<7> [111.763082] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00
<7> [111.763167] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [111.763252] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [111.763339] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36
<7> [111.763426] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125
<7> [111.763513] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [111.763600] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [111.763687] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [111.763774] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [111.763861] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [111.763954] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [111.764042] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000
<7> [111.764129] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0
<7> [111.764215] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [111.764302] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [111.764388] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [111.764474] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [111.764559] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:
<7> [111.764645] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000
<7> [111.764730] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [111.764816] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8
<7> [111.764902] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20
<7> [111.764999] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06
<7> [111.765085] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c
<7> [111.765170] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000
<7> [111.765256] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000
<7> [111.765341] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200
<7> [111.765425] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff
<7> [111.765509] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400
<7> [111.765593] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000
<7> [111.765677] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001
<7> [111.765761] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00
<7> [111.765845] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [111.765936] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [111.766021] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [111.766108] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.766194] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.766279] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.766364] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [111.766449] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [111.766535] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.766620] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.766705] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.766791] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [111.766876] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [111.766970] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [111.767058] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [111.767143] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0
<7> [111.767233] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no
<7> [111.767325] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no
<7> [111.767416] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no
<7> [111.767504] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no
<7> [111.767592] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no
<7> [111.767680] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:504:pipe D] enable: no [modeset]
<7> [111.767768] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:388:plane 1D] fb: [NOFB], visible: no
<7> [111.767855] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:418:plane 2D] fb: [NOFB], visible: no
<7> [111.767949] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:448:plane 3D] fb: [NOFB], visible: no
<7> [111.768037] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:478:plane 4D] fb: [NOFB], visible: no
<7> [111.768126] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:488:plane 5D] fb: [NOFB], visible: no
<7> [111.768214] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:498:cursor D] fb: [NOFB], visible: no
<7> [111.768908] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [111.769061] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x28000000)
<7> [111.769158] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [111.769290] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x20000000)
<7> [111.769384] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G] Disable audio codec on [CRTC:504:pipe D]
<7> [111.793902] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [111.794623] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe D
<7> [111.816628] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x8, on? 1) for [CRTC:504:pipe D]
<7> [111.818129] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7> [111.818557] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2
<7> [111.818936] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e030b2 0x28d10e73)
<7> [111.819312] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F]
<7> [111.819423] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A]
<7> [111.819517] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B]
<7> [111.819603] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C]
<7> [111.819689] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D]
<7> [111.819774] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G]
<7> [111.819856] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A]
<7> [111.819951] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B]
<7> [111.820032] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C]
<7> [111.820110] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D]
<7> [111.820188] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H]
<7> [111.820268] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I]
<7> [111.820350] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A]
<7> [111.820431] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B]
<7> [111.820512] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C]
<7> [111.820592] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D]
<7> [111.820974] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [111.821143] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)
<7> [111.821447] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:150:pipe A]
<7> [111.821542] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2
<7> [111.826761] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01
<7> [111.831829] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [111.832890] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 02 01 04 01 0f 00 01
<7> [111.833585] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a
<7> [111.835161] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [111.835863] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1
<7> [111.841904] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Clock recovery OK
<7> [111.842316] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3
<7> [111.849963] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful
<7> [111.850417] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4
<7> [111.851959] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [111.852543] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x2, on? 0) for [CRTC:268:pipe B]
<7> [111.852710] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3
<7> [111.855450] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe B
<7> [111.873128] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G] Enable audio codec on [CRTC:150:pipe A], 40 bytes ELD
<7> [111.886580] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:526:DP-2]
<7> [111.886987] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7> [111.887473] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A]
<7> [111.892386] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:538:HDMI-A-3][ENCODER:537:DDI TC3/PHY H] Enable audio codec on [CRTC:268:pipe B], 36 bytes ELD
<7> [111.906692] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000)
<7> [111.907397] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N
<7> [111.908416] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:538:HDMI-A-3]
<7> [111.909196] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]
<7> [111.913919] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [111.914607] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0xa0000000)
<7> [111.915377] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:504:pipe D]
<7> [111.916129] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [111.917504] [IGT] kms_plane_scaling: exiting, ret=0
<6> [111.937605] Console: switching to colour frame buffer device 240x67
<7> [111.954017] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
|