Results for igt@kms_force_connector_basic@force-edid

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.3-gd92116c0c (x86_64) (Linux: 7.0.0-rc3-lgci-xe-xe-4707-3ccc0e3404591e404-debug+ x86_64)
Out 
Using IGT_SRANDOM=1773330168 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.032s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.032s)
Dmesg
<6> [257.772671] Console: switching to colour dummy device 80x25
<6> [257.772873] [IGT] kms_force_connector_basic: executing
<7> [257.775370] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:516:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [257.775378] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [257.775382] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [257.779594] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<7> [257.779631] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [257.779635] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [257.783883] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<7> [257.783933] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [257.783936] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [257.788080] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<6> [257.788293] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [257.788594] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:516:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [257.788599] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [257.788604] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [257.788999] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [257.789091] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [257.789465] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [257.789550] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [257.789562] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [257.789672] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [257.795732] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [257.795741] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [257.795827] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] status updated from disconnected to connected
<7> [257.795865] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] probed modes:
<7> [257.795868] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [257.795871] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [257.795873] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [257.795876] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [257.795878] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [257.795905] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [257.795908] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [257.796299] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [257.796380] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [257.796739] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [257.796821] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [257.796829] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [257.796908] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [257.797502] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [257.797561] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [257.803375] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [257.803383] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [257.803499] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] probed modes:
<7> [257.803502] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [257.803505] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [257.803507] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [257.803509] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [257.803511] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [257.803677] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:516:HDMI-A-1] EDID override set
<7> [257.803692] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [257.803694] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [257.803932] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:516:HDMI-A-1] ELD monitor IGT
<7> [257.803935] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:516:HDMI-A-1] ELD size 24, SAD count 0
<7> [257.804239] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [257.804325] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [257.804683] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [257.804763] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [257.804843] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [257.804851] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [257.804856] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] probed modes:
<7> [257.804858] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [257.804861] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [257.804863] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [257.804866] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [257.804868] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [257.804949] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:516:HDMI-A-1] EDID override reset
<7> [257.805033] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [257.805036] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [257.805409] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [257.805489] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [257.805843] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [257.805920] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [257.805925] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [257.806003] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [257.812062] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [257.812067] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [257.812161] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:516:HDMI-A-1] EDID changed, epoch counter 2
<7> [257.812201] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [257.812207] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [257.812213] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] probed modes:
<7> [257.812215] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [257.812218] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [257.812221] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [257.812223] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [257.812225] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [257.812358] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:516:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [257.812362] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [257.812365] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [257.816508] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] status updated from connected to disconnected
<7> [257.816529] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<7> [257.816552] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [257.816593] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [257.816616] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [257.816619] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [257.820797] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<6> [257.821013] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [257.833259] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [257.833266] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [257.833321] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [257.833325] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:eDP-1]
<7> [257.833801] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [257.834101] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [257.834214] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [257.834341] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [257.834514] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [257.834520] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [257.834523] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [257.834526] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [257.834541] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [257.834637] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [257.834728] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [257.835081] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [257.835085] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [257.835088] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [257.835091] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [257.835094] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [257.839259] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<7> [257.839264] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-1]
<7> [257.839266] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-1]
<7> [257.839416] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-1] disconnected
<7> [257.839420] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2]
<7> [257.839423] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:535:DP-2]
<7> [257.860420] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [257.881381] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [257.902340] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [257.923298] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [257.944255] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [257.965213] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [257.986170] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.007127] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.028134] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.049092] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.070080] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.091064] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.112039] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.132999] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.153961] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.174921] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.195872] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.216823] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.237774] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.258725] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.279678] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.300634] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.321589] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.342544] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.363498] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.384451] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.405408] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.426365] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.447322] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.468274] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.489227] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.510185] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.510290] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [258.510307] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2] disconnected
<7> [258.510345] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3]
<7> [258.510349] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:544:DP-3]
<7> [258.510497] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3] disconnected
<7> [258.510785] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4]
<7> [258.510789] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:553:DP-4]
<7> [258.510941] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4] disconnected
<7> [258.510945] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes
<7> [258.510948] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:HDMI-A-1] enabled? no
<7> [258.510950] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:525:DP-1] enabled? no
<7> [258.510952] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:535:DP-2] enabled? no
<7> [258.510954] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:544:DP-3] enabled? no
<7> [258.510955] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:553:DP-4] enabled? no
<7> [258.510980] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [258.510992] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 3840x2160
<7> [258.510994] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
<7> [258.511010] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 3840x2160 set (0,0)
<7> [258.530876] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [258.531399] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:507:eDP-1] force updated from 0 to 0 or reprobing
<7> [258.531404] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [258.531407] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:eDP-1]
<7> [258.531867] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [258.532168] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [258.532265] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [258.532358] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [258.532600] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [258.532613] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [258.532622] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [258.532630] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [258.532667] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [258.532902] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [258.532992] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [258.533368] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [258.533371] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [258.533374] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [258.533403] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [258.533406] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:eDP-1]
<7> [258.533872] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [258.534322] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [258.534412] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [258.534507] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [258.534755] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [258.534764] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [258.534771] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [258.534778] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [258.534802] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [258.535002] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [258.535086] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [258.535444] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [258.535447] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [258.535450] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [258.535539] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:507:eDP-1] EDID override reset
<7> [258.535555] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [258.535559] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:eDP-1]
<7> [258.535997] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [258.536297] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [258.536474] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [258.536647] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [258.536846] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [258.536853] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [258.536859] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [258.536864] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [258.536886] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [258.537004] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [258.537092] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [258.537610] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [258.537614] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [258.537616] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [258.537743] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:516:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [258.537747] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [258.537750] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [258.541908] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<7> [258.541932] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [258.541935] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [258.546087] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<7> [258.546173] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:516:HDMI-A-1] EDID override reset
<7> [258.546189] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [258.546192] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [258.550352] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<7> [258.550431] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:525:DP-1] EDID override reset
<7> [258.550445] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-1]
<7> [258.550448] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-1]
<7> [258.550595] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-1] disconnected
<7> [258.550658] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:535:DP-2] EDID override reset
<7> [258.550669] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2]
<7> [258.550671] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:535:DP-2]
<7> [258.571667] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.592627] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.613581] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.634534] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.655484] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.676433] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.697383] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.718335] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.739286] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.760235] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.781183] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.802133] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.823085] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.844033] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.865012] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.885983] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.906941] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.927900] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.948847] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.969794] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [258.990740] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.011687] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.032633] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.053579] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.074525] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.095478] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.116428] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.137380] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.158329] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.179276] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.200223] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.221171] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [259.221276] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [259.221292] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2] disconnected
<7> [259.221393] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:544:DP-3] EDID override reset
<7> [259.221410] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3]
<7> [259.221414] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:544:DP-3]
<7> [259.221581] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3] disconnected
<7> [259.221648] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:553:DP-4] EDID override reset
<7> [259.221660] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4]
<7> [259.221662] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:553:DP-4]
<7> [259.221801] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4] disconnected
<7> [259.241885] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [259.242186] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [259.258553] Console: switching to colour frame buffer device 240x67
Created at 2026-03-12 15:51:35