Results for igt@kms_force_connector_basic@force-edid

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.3-gd92116c0c (x86_64) (Linux: 7.0.0-rc3-lgci-xe-xe-4705-a0e231ebb0df84f6f-debug+ x86_64)
Out 
Using IGT_SRANDOM=1773315759 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.027s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.027s)
Dmesg
<6> [252.290200] Console: switching to colour dummy device 80x25
<6> [252.290727] [IGT] kms_force_connector_basic: executing
<7> [252.296129] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:551:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [252.296151] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [252.296165] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [252.300581] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [252.300647] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [252.300656] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [252.305010] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [252.305049] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [252.305055] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [252.309359] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<6> [252.309869] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [252.310577] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:551:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [252.310589] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [252.310596] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [252.311070] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [252.311314] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [252.311721] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [252.311974] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [252.311994] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [252.312222] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [252.314505] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [252.314521] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [252.314749] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] status updated from disconnected to connected
<7> [252.314868] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [252.315016] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [252.315077] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] probed modes:
<7> [252.315086] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [252.315095] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [252.315103] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [252.315111] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [252.315118] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [252.315180] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [252.315188] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [252.316235] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [252.316472] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [252.316868] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [252.317093] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [252.317112] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [252.317330] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [252.319574] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [252.319589] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [252.319961] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] probed modes:
<7> [252.319972] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [252.319979] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [252.319986] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [252.319992] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [252.319999] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [252.320401] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:551:HDMI-A-1] EDID override set
<7> [252.320449] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [252.320459] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [252.321037] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:551:HDMI-A-1] ELD monitor IGT
<7> [252.321048] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:551:HDMI-A-1] ELD size 24, SAD count 0
<7> [252.321257] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [252.321501] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [252.321922] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [252.322169] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [252.322448] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [252.322474] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [252.322490] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] probed modes:
<7> [252.322498] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [252.322505] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [252.322511] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [252.322518] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [252.322525] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [252.322766] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:551:HDMI-A-1] EDID override reset
<7> [252.323088] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [252.323099] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [252.323596] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [252.323834] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [252.324247] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [252.324466] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [252.324481] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [252.324688] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [252.326944] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [252.326958] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [252.327164] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:551:HDMI-A-1] EDID changed, epoch counter 2
<7> [252.327291] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [252.327308] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [252.327325] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] probed modes:
<7> [252.327332] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [252.327338] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [252.327344] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [252.327351] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [252.327356] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [252.327650] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:551:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [252.327659] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [252.327668] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [252.332156] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] status updated from connected to disconnected
<7> [252.332177] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [252.332237] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [252.332351] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [252.332412] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [252.332420] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [252.336759] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<6> [252.337398] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [252.339766] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [252.340798] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [252.349875] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [252.349892] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [252.350035] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1]
<7> [252.350046] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:511:eDP-1]
<7> [252.350759] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [252.351716] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [252.352069] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [252.352374] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [252.352716] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [252.352732] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [252.352741] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [252.352750] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD monitor
<7> [252.352758] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD size 20, SAD count 0
<7> [252.352801] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] VRR capable: yes
<7> [252.353133] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [252.353438] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [252.354255] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1] probed modes:
<7> [252.354266] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [252.354275] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [252.354285] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:DP-1]
<7> [252.354294] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:520:DP-1]
<7> [252.354628] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:DP-1] disconnected
<7> [252.354636] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2]
<7> [252.354643] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-2]
<7> [252.354972] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected
<7> [252.354981] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]
<7> [252.354988] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]
<7> [252.355324] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected
<7> [252.355334] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [252.355343] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [252.359739] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [252.359748] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:511:eDP-1] enabled? yes
<7> [252.359755] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:520:DP-1] enabled? no
<7> [252.359761] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-2] enabled? no
<7> [252.359766] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:DP-3] enabled? no
<7> [252.359770] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:551:HDMI-A-1] enabled? no
<7> [252.359825] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [252.359874] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:511:eDP-1] found preferred mode: 1920x1200
<7> [252.359881] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config
<7> [252.359913] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 1920x1200 set (0,0)
<7> [252.366587] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [252.367964] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:511:eDP-1] force updated from 0 to 0 or reprobing
<7> [252.367974] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1]
<7> [252.367983] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:511:eDP-1]
<7> [252.368672] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [252.369255] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [252.369545] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [252.369824] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [252.370231] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [252.370243] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [252.370251] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [252.370259] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD monitor
<7> [252.370268] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD size 20, SAD count 0
<7> [252.370297] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] VRR capable: yes
<7> [252.370562] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [252.370823] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [252.371591] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1] probed modes:
<7> [252.371599] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [252.371607] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [252.371659] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1]
<7> [252.371667] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:511:eDP-1]
<7> [252.372340] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [252.372836] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [252.373129] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [252.373411] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [252.373693] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [252.373703] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [252.373711] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [252.373719] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD monitor
<7> [252.373727] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD size 20, SAD count 0
<7> [252.373753] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] VRR capable: yes
<7> [252.374139] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [252.374391] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [252.375076] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1] probed modes:
<7> [252.375083] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [252.375091] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [252.375278] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:511:eDP-1] EDID override reset
<7> [252.375314] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1]
<7> [252.375322] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:511:eDP-1]
<7> [252.375971] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [252.376487] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [252.376731] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [252.377024] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [252.377308] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [252.377318] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [252.377326] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [252.377334] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD monitor
<7> [252.377342] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD size 20, SAD count 0
<7> [252.377368] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] VRR capable: yes
<7> [252.377641] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [252.377926] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [252.378605] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1] probed modes:
<7> [252.378612] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [252.378619] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [252.378733] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:520:DP-1] EDID override reset
<7> [252.378748] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:DP-1]
<7> [252.378752] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:520:DP-1]
<7> [252.378905] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:DP-1] disconnected
<7> [252.378989] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:533:DP-2] EDID override reset
<7> [252.379004] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2]
<7> [252.379007] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-2]
<7> [252.379146] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected
<7> [252.379235] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:542:DP-3] EDID override reset
<7> [252.379250] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]
<7> [252.379254] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]
<7> [252.379388] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected
<7> [252.379511] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:551:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [252.379515] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [252.379518] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [252.383671] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [252.383691] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [252.383693] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [252.384895] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [252.385084] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [252.385235] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [252.387837] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [252.387914] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:551:HDMI-A-1] EDID override reset
<7> [252.387925] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [252.387928] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [252.392084] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [252.392756] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [252.392879] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [252.399895] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [252.400286] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [252.408289] Console: switching to colour frame buffer device 240x75
Created at 2026-03-12 11:53:54