<5>[ 0.000000] Linux version 7.0.0-rc3-lgci-xe-xe-4693-ab86ea7989502faea-debug+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04.1) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Tue Mar 10 19:39:05 UTC 2026 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x0000000080800000-0x00000000bfffffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x00000000d0000000-0x00000000fed1ffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x00000000fed80000-0x00000000ff1fffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] System RAM <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x69916018 ESRT=0x68ff8518 MOKvar=0x6ccfb000 <6>[ 0.000000] efi: Remove mem259: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] device reserved <6>[ 0.000000] efi: Remove mem261: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] device reserved <6>[ 0.000000] SMBIOS 3.8 present. <6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D99.2508051732 08/05/2025 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3100.000 MHz processor <6>[ 0.000000] tsc: Detected 3110.400 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] System RAM ==> device reserved <7>[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] System RAM <6>[ 0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000017] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs <6>[ 0.000018] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000385] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000387] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.004905] esrt: Reserving ESRT space from 0x0000000068ff8518 to 0x0000000068ff8668. <7>[ 0.004913] e820: update [mem 0x68ff8000-0x68ff8fff] System RAM ==> device reserved <6>[ 0.004931] Using GB pages for direct mapping <6>[ 0.005623] printk: log buffer data + meta data: 1048576 + 4456448 = 5505024 bytes <6>[ 0.005625] printk: early log buf free: 258480(98%) <6>[ 0.005625] Secure boot disabled <6>[ 0.005627] ACPI: Early table checksum verification disabled <6>[ 0.005630] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.005633] ACPI: XSDT 0x000000006FF70228 000194 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005637] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013) <6>[ 0.005639] ACPI: DSDT 0x000000006FFB6000 02555F (v02 INTEL LNL 00000002 01000013) <6>[ 0.005641] ACPI: FACS 0x000000006FEF1000 000040 <6>[ 0.005642] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005644] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005645] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005646] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005648] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005649] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005650] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005652] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005653] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005654] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005656] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000) <6>[ 0.005657] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005659] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005660] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930) <6>[ 0.005661] ACPI: SSDT 0x000000006FFDD000 009176 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005662] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005664] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930) <6>[ 0.005665] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005666] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005668] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005669] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005670] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013) <6>[ 0.005672] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013) <6>[ 0.005673] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930) <6>[ 0.005674] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005676] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930) <6>[ 0.005677] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930) <6>[ 0.005678] ACPI: LPIT 0x000000006FF85000 0000CC (v01 INTEL LNL 00000002 01000013) <6>[ 0.005680] ACPI: SSDT 0x000000006FF84000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005681] ACPI: SSDT 0x000000006FF83000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005682] ACPI: DBGP 0x000000006FF82000 000034 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005684] ACPI: DBG2 0x000000006FF81000 000054 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005685] ACPI: NHLT 0x000000006FF80000 0002E3 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005686] ACPI: SSDT 0x000000006FF7E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005687] ACPI: SSDT 0x000000006FF77000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005689] ACPI: ECDT 0x000000006FF76000 000069 (v01 LNL 00000002 01000013) <6>[ 0.005690] ACPI: DMAR 0x000000006FF75000 0000D8 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005691] ACPI: FPDT 0x000000006FF74000 000044 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005693] ACPI: SSDT 0x000000006FF73000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930) <6>[ 0.005694] ACPI: SSDT 0x000000006FF71000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005696] ACPI: SSDT 0x000000006FF6D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005697] ACPI: SDEV 0x000000006FFA8000 000046 (v01 00000000 00000000) <6>[ 0.005698] ACPI: SSDT 0x000000006FF62000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930) <6>[ 0.005700] ACPI: PHAT 0x000000006FF61000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D) <6>[ 0.005701] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005702] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113] <6>[ 0.005703] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb55e] <6>[ 0.005703] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f] <6>[ 0.005704] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387] <6>[ 0.005704] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9] <6>[ 0.005704] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa] <6>[ 0.005704] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.005705] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.005705] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.005705] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.005706] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.005706] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.005706] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6] <6>[ 0.005706] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f] <6>[ 0.005707] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1] <6>[ 0.005707] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f] <6>[ 0.005707] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4] <6>[ 0.005708] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6175] <6>[ 0.005708] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df] <6>[ 0.005708] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2] <6>[ 0.005708] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e] <6>[ 0.005709] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955] <6>[ 0.005709] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037] <6>[ 0.005709] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027] <6>[ 0.005710] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7] <6>[ 0.005710] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b] <6>[ 0.005710] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2] <6>[ 0.005711] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320] <6>[ 0.005711] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469] <6>[ 0.005711] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815] <6>[ 0.005711] ACPI: Reserving LPIT table memory at [mem 0x6ff85000-0x6ff850cb] <6>[ 0.005712] ACPI: Reserving SSDT table memory at [mem 0x6ff84000-0x6ff84d5b] <6>[ 0.005712] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff831ef] <6>[ 0.005712] ACPI: Reserving DBGP table memory at [mem 0x6ff82000-0x6ff82033] <6>[ 0.005713] ACPI: Reserving DBG2 table memory at [mem 0x6ff81000-0x6ff81053] <6>[ 0.005713] ACPI: Reserving NHLT table memory at [mem 0x6ff80000-0x6ff802e2] <6>[ 0.005713] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff7f15b] <6>[ 0.005713] ACPI: Reserving SSDT table memory at [mem 0x6ff77000-0x6ff7d53a] <6>[ 0.005714] ACPI: Reserving ECDT table memory at [mem 0x6ff76000-0x6ff76068] <6>[ 0.005714] ACPI: Reserving DMAR table memory at [mem 0x6ff75000-0x6ff750d7] <6>[ 0.005714] ACPI: Reserving FPDT table memory at [mem 0x6ff74000-0x6ff74043] <6>[ 0.005715] ACPI: Reserving SSDT table memory at [mem 0x6ff73000-0x6ff7386c] <6>[ 0.005715] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff723da] <6>[ 0.005715] ACPI: Reserving SSDT table memory at [mem 0x6ff6d000-0x6ff6f462] <6>[ 0.005716] ACPI: Reserving SDEV table memory at [mem 0x6ffa8000-0x6ffa8045] <6>[ 0.005716] ACPI: Reserving SSDT table memory at [mem 0x6ff62000-0x6ff6c4f9] <6>[ 0.005716] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff617bf] <6>[ 0.005717] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037] <6>[ 0.005794] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.006001] No NUMA configuration found <6>[ 0.006002] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff] <6>[ 0.006006] NODE_DATA(0) allocated [mem 0x87f292e40-0x87f2bdfff] <6>[ 0.006562] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.006566] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.006613] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.006615] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.006616] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.006618] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.006619] ACPI: HPET id: 0x8086a701 base: 0xfed00000 <7>[ 0.006626] e820: update [mem 0x6992d000-0x69947fff] System RAM ==> device reserved <6>[ 0.006631] TSC deadline timer available <6>[ 0.006632] CPU topo: Max. logical packages: 1 <6>[ 0.006632] CPU topo: Max. logical nodes: 1 <6>[ 0.006633] CPU topo: Num. nodes per package: 1 <6>[ 0.006633] CPU topo: Max. logical dies: 1 <6>[ 0.006634] CPU topo: Max. dies per package: 1 <6>[ 0.006635] CPU topo: Max. threads per core: 1 <6>[ 0.006635] CPU topo: Num. cores per package: 8 <6>[ 0.006636] CPU topo: Num. threads per package: 8 <6>[ 0.006636] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs <6>[ 0.006646] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.006647] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.006648] PM: hibernation: Registered nosave memory: [mem 0x68ff8000-0x68ff8fff] <6>[ 0.006649] PM: hibernation: Registered nosave memory: [mem 0x6992d000-0x69947fff] <6>[ 0.006650] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fffefff] <6>[ 0.006651] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x1044fffff] <6>[ 0.006652] [gap 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.006653] Booting paravirtualized kernel on bare hardware <6>[ 0.006654] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.006693] Zone ranges: <6>[ 0.006693] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006694] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006695] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.006696] Device empty <6>[ 0.006697] Movable zone start for each node <6>[ 0.006697] Early memory node ranges <6>[ 0.006698] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006698] node 0: [mem 0x0000000000100000-0x000000006cac0fff] <6>[ 0.006699] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.006699] node 0: [mem 0x0000000104500000-0x000000087f7fffff] <6>[ 0.006701] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.006707] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006728] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.008333] On node 0, zone DMA32: 13630 pages in unavailable ranges <6>[ 0.036171] On node 0, zone Normal: 17664 pages in unavailable ranges <6>[ 0.036179] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.036187] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 <6>[ 0.036519] percpu: Embedded 87 pages/cpu s233472 r8192 d114688 u524288 <7>[ 0.036524] pcpu-alloc: s233472 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.036525] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 <5>[ 0.036539] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.036638] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.036656] random: crng init done <6>[ 0.038486] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.039389] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.039451] software IO TLB: area num 8. <6>[ 0.046799] Fallback order for Node 0: 0 <6>[ 0.046802] Built 1 zonelists, mobility grouping on. Total pages: 8289632 <6>[ 0.046803] Policy zone: Normal <6>[ 0.046813] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.046814] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.046817] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.047734] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.079430] ********************************************************** <4>[ 0.079431] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.079431] ** ** <4>[ 0.079431] ** This system shows unhashed kernel memory addresses ** <4>[ 0.079432] ** via the console, logs, and other interfaces. This ** <4>[ 0.079432] ** might reduce the security of your system. ** <4>[ 0.079432] ** ** <4>[ 0.079432] ** If you see this message and you are not debugging ** <4>[ 0.079432] ** the kernel, report this immediately to your system ** <4>[ 0.079432] ** administrator! ** <4>[ 0.079433] ** ** <4>[ 0.079433] ** Use hash_pointers=always to force this mode off ** <4>[ 0.079433] ** ** <4>[ 0.079433] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.079433] ********************************************************** <6>[ 0.080516] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 0.088877] ftrace: allocating 61421 entries in 240 pages <6>[ 0.088879] ftrace: allocated 240 pages with 4 groups <6>[ 0.089904] Dynamic Preempt: lazy <6>[ 0.090407] Running RCU self tests <6>[ 0.090407] Running RCU synchronous self tests <6>[ 0.090408] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.090408] rcu: RCU lockdep checking is enabled. <6>[ 0.090409] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. <6>[ 0.090409] Trampoline variant of Tasks RCU enabled. <6>[ 0.090410] Rude variant of Tasks RCU enabled. <6>[ 0.090410] Tracing variant of Tasks RCU enabled. <6>[ 0.090410] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.090411] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 <6>[ 0.090476] Running RCU synchronous self tests <6>[ 0.090480] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.090483] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.101691] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 <6>[ 0.102163] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.102594] Console: colour dummy device 80x25 <6>[ 0.102603] printk: legacy console [tty0] enabled <6>[ 0.103770] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.103777] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.103781] ... MAX_LOCK_DEPTH: 48 <6>[ 0.103784] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.103788] ... CLASSHASH_SIZE: 4096 <6>[ 0.103791] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.103795] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.103799] ... CHAINHASH_SIZE: 262144 <6>[ 0.103802] memory used by lock dependency info: 54145 kB <6>[ 0.103807] memory used for stack traces: 4224 kB <6>[ 0.103810] per task-struct memory footprint: 1920 bytes <6>[ 0.103862] ACPI: Core revision 20251212 <6>[ 0.104737] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.104801] APIC: Switch to symmetric I/O mode setup <6>[ 0.104807] DMAR: Host address width 38 <6>[ 0.104811] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.104841] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.104877] DMAR: DRHD base: 0x000000fc810000 flags: 0x0 <6>[ 0.104898] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.104924] DMAR: DRHD base: 0x000000fc820000 flags: 0x1 <6>[ 0.104945] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda <6>[ 0.104979] DMAR: SATC flags: 0x1 <6>[ 0.104988] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2 <6>[ 0.104993] DMAR-IR: HPET id 0 under DRHD base 0xfc820000 <6>[ 0.104997] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.107029] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.112088] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 0.112106] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400) <6>[ 0.112183] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.112190] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.112374] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.112379] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.112388] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.112399] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.112406] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.112411] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.112415] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.112423] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.112439] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.112446] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.112451] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.112457] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.112463] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.112470] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.112476] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.112481] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.112486] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.112491] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.112496] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.113100] Freeing SMP alternatives memory: 56K <6>[ 0.113100] pid_max: default: 32768 minimum: 301 <6>[ 0.113100] landlock: Up and running. <6>[ 0.113100] Yama: becoming mindful. <6>[ 0.113100] AppArmor: AppArmor initialized <6>[ 0.113100] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.113100] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.113100] VFS: Finished mounting rootfs on nullfs <6>[ 0.113100] Running RCU synchronous self tests <6>[ 0.113100] Running RCU synchronous self tests <6>[ 0.113100] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1) <6>[ 0.113100] Performance Events: XSAVE Architectural LBR, PEBS fmt6+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.113144] core: cpu_core PMU driver: <6>[ 0.113152] ... version: 6 <6>[ 0.113156] ... bit width: 48 <6>[ 0.113159] ... generic counters: 10 <6>[ 0.113163] ... generic bitmap: 00000000000003ff <6>[ 0.113168] ... fixed-purpose counters: 4 <6>[ 0.113171] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.113176] ... value mask: 0000ffffffffffff <6>[ 0.113180] ... max period: 00007fffffffffff <6>[ 0.113185] ... global_ctrl mask: 0001000f000003ff <6>[ 0.113266] signal: max sigframe size: 3632 <6>[ 0.113289] Estimated ratio of average max frequency by base frequency (times 1024): 1189 <6>[ 0.113399] rcu: Hierarchical SRCU implementation. <6>[ 0.113403] rcu: Max phase no-delay instances is 400. <6>[ 0.113553] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.115526] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.115806] smp: Bringing up secondary CPUs ... <6>[ 0.116171] smpboot: x86: Booting SMP configuration: <6>[ 0.116178] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 <6>[ 0.010752] core: The event 0x5d0 is not supported as an auto-counter reload event. <6>[ 0.010752] core: cpu_atom PMU driver: <6>[ 0.010752] ... version: 6 <6>[ 0.010752] ... bit width: 48 <6>[ 0.010752] ... generic counters: 8 <6>[ 0.010752] ... generic bitmap: 00000000000000ff <6>[ 0.010752] ... fixed-purpose counters: 6 <6>[ 0.010752] ... fixed-purpose bitmap: 0000000000000077 <6>[ 0.010752] ... value mask: 0000ffffffffffff <6>[ 0.010752] ... max period: 00007fffffffffff <6>[ 0.010752] ... global_ctrl mask: 00000077000000ff <6>[ 0.125144] smp: Brought up 1 node, 8 CPUs <6>[ 0.125652] smpboot: Total of 8 processors activated (49766.40 BogoMIPS) <6>[ 0.127271] Memory: 32297692K/33158528K available (25915K kernel code, 5826K rwdata, 9720K rodata, 5768K init, 67912K bss, 837304K reserved, 0K cma-reserved) <6>[ 0.127631] devtmpfs: initialized <6>[ 0.128259] x86/mm: Memory block size: 128MB <6>[ 0.152152] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes) <6>[ 0.152759] Running RCU synchronous self tests <6>[ 0.152772] Running RCU synchronous self tests <6>[ 0.153387] Running RCU Tasks wait API self tests <6>[ 0.154137] Running RCU Tasks Rude wait API self tests <6>[ 0.154137] Running RCU Tasks Trace wait API self tests <6>[ 0.154177] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.154189] posixtimers hash table entries: 4096 (order: 7, 294912 bytes, linear) <6>[ 0.154258] futex hash table entries: 2048 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear). <6>[ 0.155827] PM: RTC time: 13:20:44, date: 2026-03-11 <6>[ 0.156620] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.157747] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.158052] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.158370] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.158429] audit: initializing netlink subsys (disabled) <5>[ 0.158467] audit: type=2000 audit(1773235244.046:1): state=initialized audit_enabled=0 res=1 <6>[ 0.159448] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.159450] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.159456] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.159461] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.159465] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.159501] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.159522] cpuidle: using governor ladder <6>[ 0.159522] cpuidle: using governor menu <6>[ 0.162056] efi: Freeing EFI boot services memory: 59316K <6>[ 0.162066] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.162507] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.162534] PCI: Using configuration type 1 for base access <6>[ 0.162666] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.164327] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.164327] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.164327] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.164327] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.177907] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.177967] raid6: using avx2x2 recovery algorithm <6>[ 0.178758] fbcon: Taking over console <6>[ 0.178890] ACPI: Added _OSI(Module Device) <6>[ 0.178895] ACPI: Added _OSI(Processor Device) <6>[ 0.178900] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.801547] ACPI: 31 ACPI AML tables successfully acquired and loaded <6>[ 0.844042] ACPI: EC: EC started <6>[ 0.844074] ACPI: EC: interrupt blocked <6>[ 0.851941] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.851956] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 0.896179] Callback from call_rcu_tasks() invoked. <6>[ 1.174127] ACPI: \_SB_: platform _OSC: OS support mask [006e7eff] <6>[ 1.184276] ACPI: \_SB_: platform _OSC: OS control mask [006e7eff] <6>[ 1.188050] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.188061] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.234082] ACPI: Interpreter enabled <6>[ 1.234262] ACPI: PM: (supports S0 S4 S5) <6>[ 1.234271] ACPI: Using IOAPIC for interrupt routing <6>[ 1.243103] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.243117] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.275908] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.275976] ACPI: Enabled 13 GPEs in block 80 to DF <6>[ 1.345385] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource <6>[ 1.345903] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource <6>[ 1.351621] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.860501] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 1.902090] ACPI: \_SB_.PC00.RP02.PXP_: New power resource <6>[ 2.085414] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource <6>[ 2.088645] ACPI: \_SB_.PC00.RP04.PXP_: New power resource <6>[ 2.103228] ACPI: \_SB_.PC00.RP05.PXP_: New power resource <6>[ 2.119442] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 2.119786] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 2.120139] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.538800] ACPI: \_TZ_.FN00: New power resource <6>[ 2.539905] ACPI: \_TZ_.FN01: New power resource <6>[ 2.540824] ACPI: \_TZ_.FN02: New power resource <6>[ 2.541769] ACPI: \_TZ_.FN03: New power resource <6>[ 2.542740] ACPI: \_TZ_.FN04: New power resource <6>[ 2.545500] ACPI: \PIN_: New power resource <6>[ 2.551810] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.551837] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.557272] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 2.573593] PCI host bridge to bus 0000:00 <6>[ 2.573650] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.573664] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.573675] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.573688] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 2.573700] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window] <6>[ 2.573715] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.578724] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.580013] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.580105] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref] <6>[ 2.580118] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref] <6>[ 2.580131] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref] <6>[ 2.580188] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.582381] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.582413] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit] <6>[ 2.584824] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.584857] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit] <6>[ 2.584868] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit] <6>[ 2.586408] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port <6>[ 2.586449] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.586463] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 2.586484] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 2.586603] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.586692] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.594335] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port <6>[ 2.594378] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.594393] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 2.594413] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 2.594534] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold <6>[ 2.594613] pci 0000:00:07.1: PTM enabled (root), 4ns granularity <6>[ 2.602020] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port <6>[ 2.602063] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.602077] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 2.602097] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 2.602212] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold <6>[ 2.602293] pci 0000:00:07.2: PTM enabled (root), 4ns granularity <6>[ 2.609903] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.609943] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit] <6>[ 2.609961] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.610388] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.610420] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit] <6>[ 2.610431] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit] <6>[ 2.611650] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.611705] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit] <6>[ 2.611786] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.614480] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.614534] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit] <6>[ 2.614546] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit] <6>[ 2.614613] pci 0000:00:0d.2: supports D1 D2 <6>[ 2.614620] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.617124] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.617178] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit] <6>[ 2.617190] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit] <6>[ 2.617257] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.617264] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.619587] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.619648] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit] <6>[ 2.619726] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.624524] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.624611] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit] <6>[ 2.624718] pci 0000:00:13.0: PME# supported from D3hot <6>[ 2.625477] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.625532] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit] <6>[ 2.625608] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.629189] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.629255] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit] <6>[ 2.629268] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit] <6>[ 2.629724] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.629833] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.643942] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.644062] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.658717] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.658836] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.679952] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.680036] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.698831] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.698955] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit] <6>[ 2.699100] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.704235] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port <6>[ 2.704272] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.704283] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 2.704294] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 2.704437] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 2.704530] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity <6>[ 2.711361] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port <6>[ 2.711471] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.711509] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 2.711830] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <6>[ 2.712049] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity <6>[ 2.720973] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.723648] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.723769] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit] <6>[ 2.723788] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit] <6>[ 2.723918] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.724864] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.724935] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit] <6>[ 2.724952] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.727987] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.728111] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.728761] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.729020] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.729338] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.729642] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint <6>[ 2.729715] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff] <6>[ 2.729728] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit] <6>[ 2.729741] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit] <6>[ 2.729960] pci 0000:7f:00.0: supports D1 D2 <6>[ 2.729967] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.731194] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.733207] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.733753] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint <6>[ 2.733807] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit] <6>[ 2.734065] pci 0000:80:00.0: 15.753 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x1 link at 0000:00:1c.4 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link) <6>[ 2.735877] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.738343] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 3.165138] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 3.165163] Low-power S0 idle used by default for system suspend <6>[ 3.257773] ACPI: EC: interrupt unblocked <6>[ 3.257798] ACPI: EC: event unblocked <6>[ 3.258105] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 3.258105] ACPI: EC: GPE=0x6e <6>[ 3.258105] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 3.258105] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 3.261399] iommu: Default domain type: Translated <6>[ 3.261399] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 3.266233] SCSI subsystem initialized <7>[ 3.266365] libata version 3.00 loaded. <6>[ 3.267181] ACPI: bus type USB registered <6>[ 3.267503] usbcore: registered new interface driver usbfs <6>[ 3.267660] usbcore: registered new interface driver hub <6>[ 3.267799] usbcore: registered new device driver usb <6>[ 3.268215] pps_core: LinuxPPS API ver. 1 registered <6>[ 3.268228] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 3.268288] PTP clock support registered <6>[ 3.269255] EDAC MC: Ver: 3.0.0 <6>[ 3.272154] efivars: Registered efivars operations <6>[ 3.277210] NetLabel: Initializing <6>[ 3.277221] NetLabel: domain hash size = 128 <6>[ 3.277232] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 3.277420] NetLabel: unlabeled traffic allowed by default <6>[ 3.277464] mctp: management component transport protocol core <6>[ 3.277478] NET: Registered PF_MCTP protocol family <6>[ 3.277601] PCI: Using ACPI for IRQ routing <7>[ 3.340068] PCI: pci_cache_line_size set to 64 bytes <6>[ 3.340372] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <6>[ 3.340539] e820: register RAM buffer resource [mem 0x0009f000-0x0009ffff] <6>[ 3.340578] e820: register RAM buffer resource [mem 0x68ff8000-0x6bffffff] <6>[ 3.340604] e820: register RAM buffer resource [mem 0x6992d000-0x6bffffff] <6>[ 3.340627] e820: register RAM buffer resource [mem 0x6cac1000-0x6fffffff] <6>[ 3.340653] e820: register RAM buffer resource [mem 0x87f800000-0x87fffffff] <6>[ 3.342750] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 3.342750] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 3.342750] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 3.342750] vgaarb: loaded <7>[ 3.347130] Monitor-Mwait will be used to enter C-1 state <7>[ 3.347228] Monitor-Mwait will be used to enter C-2 state <7>[ 3.347228] Monitor-Mwait will be used to enter C-3 state <6>[ 3.358748] clocksource: Switched to clocksource tsc-early <5>[ 3.360023] VFS: Disk quotas dquot_6.6.0 <6>[ 3.360066] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 3.362390] AppArmor: AppArmor Filesystem Enabled <6>[ 3.362552] acpi PNP0C02:00: Skipped [io 0x002e-0x002f] <6>[ 3.362565] acpi PNP0C02:00: Skipped [io 0x004e-0x004f] <6>[ 3.362574] acpi PNP0C02:00: Skipped [io 0x0061] <6>[ 3.362583] acpi PNP0C02:00: Skipped [io 0x0063] <6>[ 3.362591] acpi PNP0C02:00: Skipped [io 0x0065] <6>[ 3.362600] acpi PNP0C02:00: Skipped [io 0x0067] <6>[ 3.362608] acpi PNP0C02:00: Skipped [io 0x0070] <6>[ 3.362617] acpi PNP0C02:00: Skipped [io 0x0080] <6>[ 3.362626] acpi PNP0C02:00: Skipped [io 0x0092] <6>[ 3.362635] acpi PNP0C02:00: Skipped [io 0x00b2-0x00b3] <6>[ 3.362650] acpi PNP0C02:00: Reserved [io 0x0680-0x069f] <6>[ 3.362665] acpi PNP0C02:00: Reserved [io 0x164e-0x164f] <6>[ 3.362744] acpi PNP0C02:01: Reserved [io 0x06a4] <6>[ 3.362763] acpi PNP0C02:01: Reserved [io 0x06a0] <6>[ 3.364725] acpi PNP0C02:04: Reserved [mem 0xfedc0000-0xfedc7fff] <6>[ 3.364740] acpi PNP0C02:04: Reserved [mem 0xd8000000-0xd8000fff] <6>[ 3.364799] acpi PNP0C02:04: Could not reserve [mem 0x00000000-0x00000fff] <6>[ 3.364815] acpi PNP0C02:04: Reserved [mem 0xc0000000-0xcfffffff] <6>[ 3.364832] acpi PNP0C02:04: Reserved [mem 0xfed20000-0xfed7ffff] <6>[ 3.364847] acpi PNP0C02:04: Could not reserve [mem 0xfc800000-0xfc81ffff] <6>[ 3.364863] acpi PNP0C02:04: Could not reserve [mem 0xfed45000-0xfed8ffff] <6>[ 3.364878] acpi PNP0C02:04: Reserved [mem 0xfee00000-0xfeefffff] <6>[ 3.367158] acpi PNP0C02:05: Reserved [mem 0xfe000000-0xfe01ffff] <6>[ 3.367173] acpi PNP0C02:05: Reserved [mem 0xfe04c000-0xfe04ffff] <6>[ 3.367187] acpi PNP0C02:05: Reserved [mem 0xfe050000-0xfe0affff] <6>[ 3.367201] acpi PNP0C02:05: Reserved [mem 0xfe0d0000-0xfe0fffff] <6>[ 3.367215] acpi PNP0C02:05: Reserved [mem 0xfe200000-0xfe7fffff] <6>[ 3.367229] acpi PNP0C02:05: Reserved [mem 0xff000000-0xffffffff] <6>[ 3.367243] acpi PNP0C02:05: Reserved [mem 0xdf000000-0xdfffffff] <6>[ 3.367260] acpi PNP0C02:05: Could not reserve [io 0x1800-0x18fe] <6>[ 3.367275] acpi PNP0C02:05: Could not reserve [mem 0xe0000000-0xe074ffff] <6>[ 3.367292] acpi PNP0C02:05: Could not reserve [mem 0xe0730000-0xe074ffff] <6>[ 3.367308] acpi PNP0C02:05: Could not reserve [mem 0xe0710000-0xefffffff] <6>[ 3.369144] acpi PNP0C02:06: Reserved [io 0x2000-0x20fe] <6>[ 3.372279] acpi PNP0C01:00: Could not reserve [mem 0x00000000-0x0009cfff] <6>[ 3.372542] pnp: PnP ACPI init <6>[ 3.403043] pnp: PnP ACPI: found 1 devices <6>[ 3.424449] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 3.424705] NET: Registered PF_INET protocol family <6>[ 3.424896] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.426883] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 3.427029] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 3.427194] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.427989] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 3.429040] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 3.429452] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.430129] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.430809] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 3.430869] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000 <6>[ 3.430879] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000 <6>[ 3.430886] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000 <6>[ 3.430929] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 3.430935] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned <6>[ 3.430940] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned <6>[ 3.430946] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned <6>[ 3.430967] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned <6>[ 3.430991] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned <6>[ 3.431015] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned <6>[ 3.431040] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned <6>[ 3.431072] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 3.431083] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 3.431092] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 3.431100] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 3.431111] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 3.431117] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff] <6>[ 3.431134] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 3.431141] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 3.431153] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 3.431159] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff] <6>[ 3.431168] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 3.431175] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 3.431188] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 3.431193] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 3.431201] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 3.431213] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 3.431249] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 3.431295] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 3.431300] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 3.431304] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 3.431309] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 3.431314] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window] <6>[ 3.431319] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] <6>[ 3.431324] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff] <6>[ 3.431328] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 3.431334] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff] <6>[ 3.431338] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 3.431343] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 3.431348] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff] <6>[ 3.431352] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 3.431357] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 3.431363] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff] <6>[ 3.431367] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff] <6>[ 3.431371] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff] <6>[ 3.432264] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 3.433774] PCI: CLS 0 bytes, default 64 <6>[ 3.433893] DMAR: No RMRR found <6>[ 3.433903] DMAR: No ATSR found <6>[ 3.433906] DMAR: dmar1: Using Queued invalidation <6>[ 3.433913] DMAR: dmar0: Using Queued invalidation <6>[ 3.433919] DMAR: dmar2: Using Queued invalidation <6>[ 3.435236] pci 0000:00:04.0: Adding to iommu group 0 <6>[ 3.435315] pci 0000:00:05.0: Adding to iommu group 1 <6>[ 3.435401] pci 0000:00:0a.0: Adding to iommu group 2 <6>[ 3.435459] pci 0000:00:0b.0: Adding to iommu group 3 <6>[ 3.438448] pci 0000:00:02.0: Adding to iommu group 4 <6>[ 3.440030] pci 0000:00:00.0: Adding to iommu group 5 <6>[ 3.440098] pci 0000:00:07.0: Adding to iommu group 6 <6>[ 3.440161] pci 0000:00:07.1: Adding to iommu group 7 <6>[ 3.440222] pci 0000:00:07.2: Adding to iommu group 8 <6>[ 3.440298] pci 0000:00:0d.0: Adding to iommu group 9 <6>[ 3.440336] pci 0000:00:0d.2: Adding to iommu group 9 <6>[ 3.440380] pci 0000:00:0d.3: Adding to iommu group 9 <6>[ 3.440443] pci 0000:00:12.0: Adding to iommu group 10 <6>[ 3.440506] pci 0000:00:13.0: Adding to iommu group 11 <6>[ 3.440575] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 3.440617] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 3.440699] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 3.440740] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 3.440813] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 3.440854] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 3.440913] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 3.440971] pci 0000:00:1c.0: Adding to iommu group 15 <6>[ 3.441080] pci 0000:00:1c.4: Adding to iommu group 16 <6>[ 3.441161] pci 0000:00:1f.0: Adding to iommu group 17 <6>[ 3.441205] pci 0000:00:1f.3: Adding to iommu group 17 <6>[ 3.441247] pci 0000:00:1f.4: Adding to iommu group 17 <6>[ 3.441289] pci 0000:00:1f.5: Adding to iommu group 17 <6>[ 3.441347] pci 0000:7f:00.0: Adding to iommu group 18 <6>[ 3.441428] pci 0000:80:00.0: Adding to iommu group 19 <6>[ 3.449697] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 3.449704] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 3.449710] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB) <6>[ 3.458302] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 3.458527] clocksource: Switched to clocksource tsc <6>[ 3.459486] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 3.470062] Initialise system trusted keyrings <5>[ 3.470131] Key type blacklist registered <6>[ 3.470725] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 3.477837] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 3.477921] ntfs3: Enabled Linux POSIX ACLs support <6>[ 3.477925] ntfs3: Read-only LZX/Xpress compression included <5>[ 3.478251] integrity: Platform Keyring initialized <5>[ 3.478264] integrity: Machine keyring initialized <6>[ 3.482694] xor: automatically using best checksumming function avx <5>[ 3.482700] Key type asymmetric registered <5>[ 3.482708] Asymmetric key parser 'x509' registered <6>[ 3.482793] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 3.484193] io scheduler mq-deadline registered <6>[ 3.485124] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.486266] pcieport 0000:00:07.0: PME: Signaling with IRQ 126 <6>[ 3.486873] pcieport 0000:00:07.0: AER: enabled with IRQ 126 <6>[ 3.487743] pcieport 0000:00:07.1: PME: Signaling with IRQ 127 <6>[ 3.488193] pcieport 0000:00:07.1: AER: enabled with IRQ 127 <6>[ 3.489055] pcieport 0000:00:07.2: PME: Signaling with IRQ 128 <6>[ 3.489347] pcieport 0000:00:07.2: AER: enabled with IRQ 128 <6>[ 3.490122] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129 <6>[ 3.490409] pcieport 0000:00:1c.0: AER: enabled with IRQ 129 <6>[ 3.491553] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130 <6>[ 3.491904] pcieport 0000:00:1c.4: AER: enabled with IRQ 130 <6>[ 3.493337] input: Lid Switch as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 3.493463] ACPI: button: Lid Switch [LID0] <6>[ 3.493717] input: Sleep Button as /devices/platform/PNP0C0E:00/input/input1 <6>[ 3.493846] ACPI: button: Sleep Button [SLPB] <6>[ 3.494095] input: Power Button as /devices/platform/PNP0C0C:00/input/input2 <6>[ 3.494172] ACPI: button: Power Button [PWRB] <6>[ 3.612639] acpi LNXTHERM:00: registered as thermal_zone0 <6>[ 3.612662] ACPI: thermal: Thermal Zone [TZ00] (44 C) <6>[ 3.616056] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 3.618513] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 3.622192] ACPI: battery: Slot [BAT0] (battery present) <6>[ 3.639595] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 3.682467] serial 0000:00:12.0: enabling device (0000 -> 0002) <5>[ 3.689822] hpet_acpi_add: no address or irqs in _CRS <6>[ 3.690044] Linux agpgart interface v0.103 <6>[ 3.691248] ACPI: bus type drm_connector registered <7>[ 3.693402] initcall simpledrm_platform_driver_init blacklisted <6>[ 3.727698] loop: module loaded <6>[ 3.797404] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 3.947476] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 4.096873] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 4.223228] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <5>[ 4.346129] Key type psk registered <6>[ 4.348607] nvme 0000:80:00.0: platform quirk: setting simple suspend <6>[ 4.349749] nvme nvme0: pci function 0000:80:00.0 <6>[ 4.350013] tun: Universal TUN/TAP device driver, 1.6 <6>[ 4.351916] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.352067] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 4.354255] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.357272] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.357318] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 4.357347] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.357984] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00 <6>[ 4.358017] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.358034] usb usb1: Product: xHCI Host Controller <6>[ 4.358045] usb usb1: Manufacturer: Linux 7.0.0-rc3-lgci-xe-xe-4693-ab86ea7989502faea-debug+ xhci-hcd <6>[ 4.358065] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 4.360711] hub 1-0:1.0: USB hub found <6>[ 4.360862] hub 1-0:1.0: 1 port detected <6>[ 4.365535] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00 <6>[ 4.365552] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.365563] usb usb2: Product: xHCI Host Controller <6>[ 4.365571] usb usb2: Manufacturer: Linux 7.0.0-rc3-lgci-xe-xe-4693-ab86ea7989502faea-debug+ xhci-hcd <6>[ 4.365583] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 4.366683] hub 2-0:1.0: USB hub found <6>[ 4.366731] hub 2-0:1.0: 3 ports detected <6>[ 4.385289] nvme nvme0: 8/0/0 default/read/poll queues <6>[ 4.394114] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.394167] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 4.396188] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.398825] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.398851] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 4.398882] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.399183] nvme0n1: p1 p2 <6>[ 4.399188] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00 <6>[ 4.399213] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.399225] usb usb3: Product: xHCI Host Controller <6>[ 4.399232] usb usb3: Manufacturer: Linux 7.0.0-rc3-lgci-xe-xe-4693-ab86ea7989502faea-debug+ xhci-hcd <6>[ 4.399236] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 4.400675] hub 3-0:1.0: USB hub found <6>[ 4.400762] hub 3-0:1.0: 8 ports detected <6>[ 4.432975] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00 <6>[ 4.432997] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.433007] usb usb4: Product: xHCI Host Controller <6>[ 4.433015] usb usb4: Manufacturer: Linux 7.0.0-rc3-lgci-xe-xe-4693-ab86ea7989502faea-debug+ xhci-hcd <6>[ 4.433028] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 4.434672] hub 4-0:1.0: USB hub found <6>[ 4.434726] hub 4-0:1.0: 2 ports detected <6>[ 4.440047] usbcore: registered new interface driver usb-storage <6>[ 4.440216] usbcore: registered new interface driver usbserial_generic <6>[ 4.440289] usbserial: USB Serial support registered for generic <6>[ 4.440352] usbcore: registered new interface driver ftdi_sio <6>[ 4.440382] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 4.440442] usbcore: registered new interface driver pl2303 <6>[ 4.440473] usbserial: USB Serial support registered for pl2303 <6>[ 4.440583] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 4.440590] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 5.153173] i8042: Can't read CTR while initializing i8042 <3>[ 5.153261] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 5.156611] mousedev: PS/2 mouse device common for all mice <6>[ 5.163551] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 5.166062] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 5.166301] rtc_cmos rtc_cmos: setting system clock to 2026-03-11T13:20:49 UTC (1773235249) <6>[ 5.166513] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 5.166574] i2c_dev: i2c /dev entries driver <6>[ 5.176418] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 5.176444] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 5.176463] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 5.176532] device-mapper: uevent: version 1.0.3 <6>[ 5.177738] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 5.177774] intel_pstate: Intel P-state driver initializing <6>[ 5.184680] Hybrid CPU capacity scaling enabled <6>[ 5.185417] processor cpu0: EM: created perf domain <6>[ 5.185997] processor cpu1: EM: created perf domain <6>[ 5.186541] processor cpu2: EM: created perf domain <6>[ 5.187101] processor cpu3: EM: created perf domain <6>[ 5.187641] processor cpu4: EM: created perf domain <6>[ 5.188173] processor cpu5: EM: created perf domain <6>[ 5.188656] processor cpu6: EM: created perf domain <6>[ 5.189114] processor cpu7: EM: created perf domain <6>[ 5.191221] intel_pstate: HWP enabled <6>[ 5.191236] sdhci: Secure Digital Host Controller Interface driver <6>[ 5.191247] sdhci: Copyright(c) Pierre Ossman <6>[ 5.191520] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 5.195707] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c] <6>[ 5.197665] drop_monitor: Initializing network drop monitor service <6>[ 5.198063] NET: Registered PF_INET6 protocol family <6>[ 5.199593] Segment Routing with IPv6 <6>[ 5.199633] In-situ OAM (IOAM) with IPv6 <6>[ 5.199686] NET: Registered PF_PACKET protocol family <5>[ 5.199887] Key type dns_resolver registered <4>[ 5.204549] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 5.205110] microcode: Current revision: 0x00000124 <6>[ 5.206085] IPI shorthand broadcast: enabled <6>[ 5.226206] sched_clock: Marking stable (5216001178, 9752213)->(5292613152, -66859761) <6>[ 5.227569] registered taskstats version 1 <5>[ 5.228677] Loading compiled-in X.509 certificates <6>[ 5.276901] Demotion targets for Node 0: null <6>[ 5.277310] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946) <6>[ 5.277328] kmemleak: Automatic memory scanning thread started <5>[ 5.277613] Key type .fscrypt registered <5>[ 5.277622] Key type fscrypt-provisioning registered <6>[ 5.280898] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 5.283125] Key type encrypted registered <6>[ 5.283132] AppArmor: AppArmor sha256 policy hashing enabled <6>[ 5.283156] ima: No TPM chip found, activating TPM-bypass! <5>[ 5.283169] Loading compiled-in module X.509 certificates <5>[ 5.283739] Loaded X.509 cert 'Build time autogenerated kernel key: deea21dc286da24e8713a21ec8a01b41fe39ad3e' <6>[ 5.283749] ima: Allocated hash algorithm: sha256 <6>[ 5.283797] ima: No architecture policies found <6>[ 5.283894] evm: Initialising EVM extended attributes: <6>[ 5.283899] evm: security.selinux <6>[ 5.283902] evm: security.SMACK64 <6>[ 5.283905] evm: security.SMACK64EXEC <6>[ 5.283908] evm: security.SMACK64TRANSMUTE <6>[ 5.283911] evm: security.SMACK64MMAP <6>[ 5.283915] evm: security.apparmor <6>[ 5.283918] evm: security.ima <6>[ 5.283920] evm: security.capability <6>[ 5.283924] evm: HMAC attrs: 0x1 <6>[ 5.286048] PM: Magic number: 2:457:331 <6>[ 5.286090] tty tty52: hash matches <6>[ 5.286151] acpi STK0006:05: hash matches <6>[ 5.286162] acpi MCHP1940:05: hash matches <6>[ 5.286190] memory memory181: hash matches <6>[ 5.286323] netconsole: network logging started <6>[ 5.286900] RAS: Correctable Errors collector initialized. <6>[ 5.287509] clk: Disabling unused clocks <6>[ 5.287520] PM: genpd: Disabling unused power domains <6>[ 5.288100] md: Waiting for all devices to be available before autodetect <6>[ 5.288106] md: If you don't use raid, use raid=noautodetect <6>[ 5.288111] md: Autodetecting RAID arrays. <6>[ 5.288119] md: autorun ... <6>[ 5.288122] md: ... autorun DONE. <6>[ 5.332028] EXT4-fs (nvme0n1p2): mounted filesystem e14561b2-a821-43fb-816a-3be81f76b65f ro with ordered data mode. Quota mode: none. <6>[ 5.332106] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 5.332651] devtmpfs: mounted <6>[ 5.332808] VFS: Pivoted into new rootfs <6>[ 5.350740] Freeing unused decrypted memory: 2036K <6>[ 5.351616] Freeing unused kernel image (initmem) memory: 5768K <6>[ 5.351641] Write protecting the kernel read-only data: 36864k <6>[ 5.352229] Freeing unused kernel image (text/rodata gap) memory: 708K <6>[ 5.352405] Freeing unused kernel image (rodata/data gap) memory: 520K <6>[ 5.357348] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 5.363846] Run /sbin/init as init process <7>[ 5.363850] with arguments: <7>[ 5.363851] /sbin/init <7>[ 5.363852] with environment: <7>[ 5.363853] HOME=/ <7>[ 5.363853] TERM=linux <7>[ 5.425358] systemd[1]: Inserted module 'autofs4' <7>[ 5.471835] systemd[1]: systemd 255.4-1ubuntu8.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 5.471911] systemd[1]: Detected architecture x86-64. <7>[ 5.474714] systemd[1]: Hostname set to . <7>[ 5.700240] systemd[1]: Queued start job for default target graphical.target. <7>[ 5.723087] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 5.724874] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 5.726405] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 5.726636] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 5.727297] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 5.727406] systemd[1]: Expecting device dev-disk-by\x2duuid-BBA4\x2d5DAC.device - /dev/disk/by-uuid/BBA4-5DAC... <7>[ 5.727486] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 5.727562] systemd[1]: Reached target slices.target - Slice Units. <7>[ 5.727630] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 5.727694] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 5.727773] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 5.728057] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 5.728422] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 5.728692] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 5.729128] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 5.729397] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 5.729593] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 5.729890] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 5.730218] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 5.730487] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 5.730657] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.730956] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 5.731216] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 5.734867] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 5.737511] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 5.740165] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 5.743019] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 5.750026] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 5.753673] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 5.757115] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 5.760172] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 5.763111] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 5.765810] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 5.769723] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 5.771622] systemd-journald[206]: Collecting audit messages is disabled. <7>[ 5.773811] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 5.780697] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 5.785646] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <6>[ 5.789011] pstore: Using crash dump compression: deflate <7>[ 5.789030] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 5.789205] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <6>[ 5.790487] pstore: Registered efi_pstore as persistent store backend <7>[ 5.793581] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <7>[ 5.798825] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 5.798993] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.799064] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.805475] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <6>[ 5.807684] fuse: init (API version 7.45) <7>[ 5.813931] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 5.940274] EXT4-fs (nvme0n1p2): re-mounted e14561b2-a821-43fb-816a-3be81f76b65f r/w. <6>[ 5.969997] Adding 8388604k swap on /swap.img. Priority:-1 extents:66 across:411435008k SS <7>[ 5.984720] systemd-journald[206]: Received client request to flush runtime journal. <7>[ 5.997724] systemd-journald[206]: /var/log/journal/50de536483fd4db8b6bcf2f985230a3b/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 5.997739] systemd-journald[206]: Rotating system journal. <4>[ 6.690021] nvme nvme0: using unchecked data buffer <6>[ 6.855619] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 6.877328] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <4>[ 6.926223] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:01, deferring <6>[ 6.934039] input: Intel HID events as /devices/platform/INTC107B:00/input/input3 <6>[ 6.942328] intel-hid INTC107B:00: platform supports 5 button array <6>[ 6.958188] ACPI: bus type thunderbolt registered <6>[ 6.960975] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4 <5>[ 6.995363] audit: type=1400 audit(1773235251.327:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=400 comm="apparmor_parser" <5>[ 6.995736] audit: type=1400 audit(1773235251.327:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=402 comm="apparmor_parser" <5>[ 6.996539] audit: type=1400 audit(1773235251.328:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=401 comm="apparmor_parser" <5>[ 6.997079] audit: type=1400 audit(1773235251.329:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=403 comm="apparmor_parser" <5>[ 6.999314] audit: type=1400 audit(1773235251.331:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=404 comm="apparmor_parser" <5>[ 7.002064] audit: type=1400 audit(1773235251.334:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=405 comm="apparmor_parser" <5>[ 7.007173] audit: type=1400 audit(1773235251.339:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=406 comm="apparmor_parser" <5>[ 7.007717] audit: type=1400 audit(1773235251.339:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=407 comm="apparmor_parser" <5>[ 7.010223] audit: type=1400 audit(1773235251.342:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=408 comm="apparmor_parser" <5>[ 7.012172] audit: type=1400 audit(1773235251.344:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=409 comm="apparmor_parser" <6>[ 7.026262] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402) <6>[ 7.038434] pci 0000:00:05.0: Setting to D3hot <6>[ 7.041340] intel_rapl_common: Found RAPL domain package <6>[ 7.041350] intel_rapl_common: Found RAPL domain dram <3>[ 7.050239] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121 <6>[ 7.050301] pci 0000:00:0b.0: Setting to D3hot <3>[ 7.050520] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121 <6>[ 7.062245] intel_pmc_core INT33A1:00: initialized <6>[ 7.262440] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0 <6>[ 7.566967] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 7.580038] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v1.bin, version: Nov 13 2025*NPU40xx*ci_tag_ud202548_vpu_rc_20251112_1901-1-g72f907ffc78*72f907ffc780df5579a2fed65afc4944da8b0e44 <6>[ 7.580047] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: HW <6>[ 7.585927] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 7.600510] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 7.627205] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 7.643963] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 7.662250] r8169 0000:7f:00.0: enabling device (0000 -> 0003) <6>[ 7.663783] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 7.783263] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c8:f7:85, XID 541, IRQ 195 <6>[ 7.783270] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] <6>[ 7.901057] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer <6>[ 7.901062] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 7.901064] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 7.901065] RAPL PMU: hw unit of domain dram 2^-14 Joules <6>[ 7.901066] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 7.901067] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 7.955480] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 7.956826] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.001360] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin <6>[ 8.004719] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.027397] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888 <6>[ 8.027403] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716 <6>[ 8.027404] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472 <4>[ 8.123122] block nvme0n1: No UUID available providing old NGUID <6>[ 8.286445] intel_rapl_common: Found RAPL domain package <6>[ 8.286451] intel_rapl_common: Found RAPL domain core <6>[ 8.286453] intel_rapl_common: Found RAPL domain uncore <6>[ 8.286455] intel_rapl_common: Found RAPL domain dram <6>[ 8.286457] intel_rapl_common: Found RAPL domain psys <6>[ 8.328401] evm: overlay not supported <6>[ 8.359025] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.439084] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.446353] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.458341] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.793644] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.828883] r8169 0000:7f:00.0 enp127s0: renamed from eth0 <4>[ 8.897297] spi-nor spi0.0: supply vcc not found, using dummy regulator <5>[ 8.917328] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 8.917351] 0x000000000000-0x000002000000 : "BIOS" <6>[ 8.920540] loop0: detected capacity change from 0 to 8 <6>[ 8.928837] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.961792] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC) <6>[ 9.056193] hid: raw HID events driver (C) Jiri Kosina <6>[ 9.083797] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 9.122814] r8169 0000:7f:00.0 enp127s0: Link is Down <6>[ 9.130604] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.153536] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.155885] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.157683] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.158915] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.161325] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.163283] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.168966] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 9.169023] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.170374] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 9.172528] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.176470] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.179891] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.181808] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.185092] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.187122] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.190501] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.190707] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.194447] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 9.194676] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.198147] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 9.198604] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.206892] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.358647] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.364832] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.370906] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.385200] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.390971] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.397416] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.398068] Consider using thermal netlink events interface <6>[ 9.401971] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.407054] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.414263] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.417059] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.419439] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.425604] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.431522] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.435505] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.441035] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.445996] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.451507] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.456589] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.462201] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.466498] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 14.236593] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off <3>[ 19.326678] ucsi_acpi USBC000:00: failed to reset PPM! <3>[ 19.326812] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed <6>[ 19.540332] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 19.543068] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 37.502441] systemd-journald[206]: /var/log/journal/50de536483fd4db8b6bcf2f985230a3b/user-1000.journal: Journal file uses a different sequence number ID, rotating. <6>[ 75.474425] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <7>[ 79.061184] [IGT] xe_module_load: executing <4>[ 79.061237] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 79.068202] [IGT] xe_module_load: starting subtest load <5>[ 79.385839] Setting dangerous option force_probe - tainting kernel <6>[ 79.389027] xe 0000:00:02.0: vgaarb: deactivate vga console <7>[ 79.390623] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error <6>[ 79.391228] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7>[ 79.391238] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7>[ 79.391421] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7>[ 79.391521] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7>[ 79.393945] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7>[ 79.394082] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7>[ 79.394188] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 79.394304] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7>[ 79.394419] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7>[ 79.394521] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7>[ 79.394623] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7>[ 79.394724] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7>[ 79.394836] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7>[ 79.394967] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 79.395086] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7>[ 79.395208] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7>[ 79.395321] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7>[ 79.395421] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7>[ 79.395524] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7>[ 79.395640] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7>[ 79.395774] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7>[ 79.395918] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7>[ 79.396056] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7>[ 79.396165] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7>[ 79.396271] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 79.396375] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 79.396477] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7>[ 79.396579] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 79.396682] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 79.396815] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 79.396949] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7>[ 79.397070] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 79.397178] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 79.397280] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 79.397380] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7>[ 79.397478] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 79.397577] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 79.397677] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 79.397802] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7>[ 79.397934] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 79.398054] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 79.398159] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 79.398258] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7>[ 79.398352] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 79.398444] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 79.398537] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 79.398634] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7>[ 79.399042] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7>[ 79.399163] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7>[ 79.399268] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7>[ 79.399368] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7>[ 79.399462] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7>[ 79.399553] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7>[ 79.399646] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 850) <7>[ 79.399758] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7>[ 79.399879] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7>[ 79.400008] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7>[ 79.400132] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7>[ 79.400247] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7>[ 79.400352] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7>[ 79.400448] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7>[ 79.400541] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7>[ 79.400631] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 79.400721] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7>[ 79.400832] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7>[ 79.400951] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 79.401064] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 79.401160] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 79.401261] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7>[ 79.401358] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 79.401443] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 79.401527] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 79.401612] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 79.401700] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7>[ 79.401868] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 79.402073] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7>[ 79.402224] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 79.402366] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7>[ 79.402554] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7>[ 79.402712] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7>[ 79.402841] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 79.402974] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 79.403124] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7>[ 79.403227] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7>[ 79.403347] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 79.403451] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7>[ 79.403570] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 79.403673] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7>[ 79.403806] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 79.403927] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7>[ 79.404239] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 79.404340] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7>[ 79.404784] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7>[ 79.405269] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7>[ 79.405401] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7>[ 79.405496] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7>[ 79.405583] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7>[ 79.405669] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7>[ 79.405768] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7>[ 79.405878] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7>[ 79.405986] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7>[ 79.406088] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7>[ 79.406177] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7>[ 79.406259] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7>[ 79.406338] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7>[ 79.406416] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7>[ 79.406491] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7>[ 79.408837] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7>[ 79.408996] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 79.409148] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 79.409273] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7>[ 79.409413] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7>[ 79.409550] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7>[ 79.409679] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7>[ 79.409831] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7>[ 79.409961] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 79.410089] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7>[ 79.410244] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 79.410419] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7>[ 79.410591] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 79.410786] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7>[ 79.410974] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7>[ 79.411143] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7>[ 79.411311] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 79.411477] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7>[ 79.411642] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 79.411813] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7>[ 79.411973] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 79.412131] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7>[ 79.412299] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7>[ 79.412479] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7>[ 79.412658] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 79.412880] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7>[ 79.413035] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 79.413190] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7>[ 79.413344] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 79.413497] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7>[ 79.416528] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available. <7>[ 79.422832] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 79.423015] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7>[ 79.423185] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7>[ 79.423370] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:391:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 79.423605] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:391:DDI A/PHY A] <7>[ 79.423852] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7>[ 79.424035] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7>[ 79.424202] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7>[ 79.424369] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 79.424553] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <6>[ 79.424676] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7>[ 79.424734] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 79.424893] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7>[ 79.425046] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7>[ 79.425197] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 79.425343] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:391:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 79.425490] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 79.425614] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 79.425737] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 79.425879] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 79.426008] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 79.426146] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 79.426305] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 79.427719] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turning VDD on <7>[ 79.427892] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 79.451725] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 79.463728] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7>[ 79.489700] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7>[ 79.525685] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7>[ 79.537684] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7>[ 79.597680] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 79.945584] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 79.945596] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 79.945598] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 79.945599] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 79.945602] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 79.945604] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 79.945605] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] ELD monitor <5>[ 79.945610] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 79.945611] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] ELD size 20, SAD count 0 <5>[ 79.945613] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 79.945649] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 79.945651] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 79.945652] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 79.945665] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:392:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 79.945792] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:392:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 79.957550] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:392:eDP-1] Performing OUI wait (0 ms) <7>[ 79.969549] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:392:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 79.969671] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:392:eDP-1] AUX Backlight Control Supported! <7>[ 79.969778] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:392:eDP-1] Using VESA eDP backlight controls <7>[ 79.969883] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:392:eDP-1] DRRS type: seamless <7>[ 79.981544] xe 0000:00:02.0: [drm:drm_edp_backlight_init [drm_display_helper]] AUX A/DDI A/PHY A: Found backlight: aux_set=0 aux_enable=0 mode=2 <7>[ 79.981561] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:392:eDP-1] AUX VESA backlight enable is controlled through PWM <7>[ 79.981686] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:392:eDP-1] AUX VESA backlight level is controlled through PWM using PWM values <7>[ 79.981818] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:392:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 79.981941] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:392:eDP-1] Using AUX VESA interface for backlight control <7>[ 79.982045] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:392:eDP-1] backlight initialized, disabled, brightness 192000/192000 <7>[ 79.982198] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 79.982308] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 79.982402] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 79.982494] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 79.982595] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 79.982721] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 79.982939] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:400:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 79.983126] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 79.983258] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:400:DDI TC1/PHY TC1] <7>[ 79.983634] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:412:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 79.983767] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 79.983889] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:412:DDI TC2/PHY TC2] <7>[ 79.984135] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:420:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 79.984265] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 79.984382] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:420:DDI TC3/PHY TC3] <7>[ 79.984744] xe 0000:00:02.0: [drm:intel_vga_disable [xe]] VGA plane is disabled <6>[ 79.984862] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io:owns=io+mem <7>[ 79.985282] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:150:pipe A] hw state readout: enabled <7>[ 79.985403] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:269:pipe B] hw state readout: disabled <7>[ 79.985530] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:388:pipe C] hw state readout: disabled <7>[ 79.985624] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:34:plane 1A] hw state readout: enabled, pipe A <7>[ 79.985717] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:64:plane 2A] hw state readout: disabled, pipe A <7>[ 79.985809] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 3A] hw state readout: disabled, pipe A <7>[ 79.985898] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:124:plane 4A] hw state readout: disabled, pipe A <7>[ 79.985986] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:134:plane 5A] hw state readout: disabled, pipe A <7>[ 79.986074] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:144:cursor A] hw state readout: disabled, pipe A <7>[ 79.986162] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:153:plane 1B] hw state readout: disabled, pipe B <7>[ 79.986247] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:plane 2B] hw state readout: disabled, pipe B <7>[ 79.986330] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:213:plane 3B] hw state readout: disabled, pipe B <7>[ 79.986415] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:243:plane 4B] hw state readout: disabled, pipe B <7>[ 79.986497] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:253:plane 5B] hw state readout: disabled, pipe B <7>[ 79.986592] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:263:cursor B] hw state readout: disabled, pipe B <7>[ 79.986676] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:272:plane 1C] hw state readout: disabled, pipe C <7>[ 79.986759] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:302:plane 2C] hw state readout: disabled, pipe C <7>[ 79.986842] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:332:plane 3C] hw state readout: disabled, pipe C <7>[ 79.986924] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:362:plane 4C] hw state readout: disabled, pipe C <7>[ 79.987006] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:372:plane 5C] hw state readout: disabled, pipe C <7>[ 79.987087] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:382:cursor C] hw state readout: disabled, pipe C <7>[ 79.988161] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 79.988279] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:391:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 79.988375] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 79.988466] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:400:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 79.988564] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST A] hw state readout: disabled, pipe A <7>[ 79.988649] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST B] hw state readout: disabled, pipe B <7>[ 79.988734] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:404:DP-MST C] hw state readout: disabled, pipe C <7>[ 79.988819] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 79.988902] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:412:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 79.988985] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST A] hw state readout: disabled, pipe A <7>[ 79.989066] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST B] hw state readout: disabled, pipe B <7>[ 79.989146] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:416:DP-MST C] hw state readout: disabled, pipe C <7>[ 79.989231] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 79.989317] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:420:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 79.989397] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST A] hw state readout: disabled, pipe A <7>[ 79.989474] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST B] hw state readout: disabled, pipe B <7>[ 79.989565] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:424:DP-MST C] hw state readout: disabled, pipe C <7>[ 79.990575] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving DPLL 0 <7>[ 79.990678] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 79.990780] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 79.990877] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 79.990978] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 79.991077] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 79.991173] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 79.991264] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 79.991379] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:392:eDP-1] hw state readout: enabled <7>[ 79.991480] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:401:DP-1] hw state readout: disabled <7>[ 79.991579] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:413:DP-2] hw state readout: disabled <7>[ 79.991668] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:421:DP-3] hw state readout: disabled <7>[ 79.991822] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:34:plane 1A] min_cdclk 173855 kHz <7>[ 79.991911] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:64:plane 2A] min_cdclk 0 kHz <7>[ 79.991996] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 3A] min_cdclk 0 kHz <7>[ 79.992081] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:124:plane 4A] min_cdclk 0 kHz <7>[ 79.992162] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:134:plane 5A] min_cdclk 0 kHz <7>[ 79.992243] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:144:cursor A] min_cdclk 0 kHz <7>[ 79.992325] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:150:pipe A] min_cdclk 173855 kHz <7>[ 79.992404] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:153:plane 1B] min_cdclk 0 kHz <7>[ 79.992482] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:plane 2B] min_cdclk 0 kHz <7>[ 79.992570] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:213:plane 3B] min_cdclk 0 kHz <7>[ 79.992647] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:243:plane 4B] min_cdclk 0 kHz <7>[ 79.992723] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:253:plane 5B] min_cdclk 0 kHz <7>[ 79.992797] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:263:cursor B] min_cdclk 0 kHz <7>[ 79.992871] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:269:pipe B] min_cdclk 0 kHz <7>[ 79.992946] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:272:plane 1C] min_cdclk 0 kHz <7>[ 79.993021] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:302:plane 2C] min_cdclk 0 kHz <7>[ 79.993100] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:332:plane 3C] min_cdclk 0 kHz <7>[ 79.993182] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:362:plane 4C] min_cdclk 0 kHz <7>[ 79.993262] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:372:plane 5C] min_cdclk 0 kHz <7>[ 79.993341] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:382:cursor C] min_cdclk 0 kHz <7>[ 79.993419] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:388:pipe C] min_cdclk 0 kHz <7>[ 79.993652] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:150:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 79.993733] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:269:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 79.993814] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:388:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 79.993894] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1 <7>[ 79.994003] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7>[ 79.994109] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7>[ 79.994244] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 79.994351] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A <7>[ 79.994608] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [setup_hw_state] <7>[ 79.994722] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 79.994823] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 79.994923] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 79.995021] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 79.995118] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 79.995217] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 79.995313] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64 <7>[ 79.995410] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 79.995507] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 79.995618] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 79.995714] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 79.995808] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 79.995903] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 79.995997] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 79.996092] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 79.996185] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96 <7>[ 79.996276] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 79.996370] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 79.996468] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 79.996575] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 79.996671] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 79.996765] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 79.996856] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 79.996948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 79.997039] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 79.997126] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 79.997215] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 79.997304] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 79.997391] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 79.997479] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes, <7>[ 79.997576] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 40960, rem: 0, den: 1, <7>[ 79.997665] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 79.997751] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 79.997834] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 79.997919] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 79.998005] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 79.998088] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 79.998171] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 79.998257] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 79.998348] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 79.998440] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 79.998536] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 79.998625] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 79.998710] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 79.998802] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 79.998885] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 79.998969] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 79.999052] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 79.999132] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 79.999212] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 79.999292] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 79.999374] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 79.999456] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: no [setup_hw_state] <7>[ 79.999546] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:388:pipe C] enable: no [setup_hw_state] <7>[ 79.999633] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <7>[ 79.999971] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:150:pipe A][PLANE:34:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <6>[ 80.000062] xe 0000:00:02.0: [drm] Initial FB size exceeds half of stolen, discarding <7>[ 80.000063] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:34:plane 1A] on [CRTC:150:pipe A] <6>[ 80.024972] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.58.0 <7>[ 80.031261] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004551cf <7>[ 80.031387] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7>[ 80.031476] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7>[ 80.031578] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 80.031660] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cac <7>[ 80.031741] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 80.031818] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 80.031893] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 80.031967] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 80.032041] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 80.032114] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 80.032186] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 80.032258] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 80.032329] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 80.032399] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 80.032519] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7>[ 80.043576] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 80.044504] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 80.044807] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,0000007f <7>[ 80.044934] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,0000007f <7>[ 80.045051] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7>[ 80.045148] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7>[ 80.045242] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6>[ 80.684238] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6>[ 80.684242] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6>[ 80.684242] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7>[ 80.684402] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7>[ 80.684533] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6217]: allow rw access <7>[ 80.684650] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62af]: allow rw access <7>[ 80.684773] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 80.684888] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 80.684989] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 80.685118] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7>[ 80.685249] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7>[ 80.685403] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7>[ 80.685504] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 80.685607] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 80.685705] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 80.686945] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7>[ 80.687054] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7>[ 80.687162] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7>[ 80.687256] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7>[ 80.687361] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7>[ 80.687458] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7>[ 80.687551] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7>[ 80.687643] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7>[ 80.687729] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7>[ 80.687816] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7>[ 80.687903] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7>[ 80.687989] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7>[ 80.688075] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7>[ 80.688160] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7>[ 80.688246] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7>[ 80.688344] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7>[ 80.688432] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7>[ 80.688521] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7>[ 80.688606] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7>[ 80.688687] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7>[ 80.688768] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7>[ 80.688847] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7>[ 80.688929] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7>[ 80.689007] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7>[ 80.689085] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7>[ 80.689162] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7>[ 80.689247] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7>[ 80.689342] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7>[ 80.689428] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7>[ 80.689512] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210 <7>[ 80.689593] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8 <7>[ 80.689675] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc <7>[ 80.689758] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01 <7>[ 80.689842] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c <7>[ 80.689928] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7>[ 80.690014] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7>[ 80.690097] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7>[ 80.690179] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7>[ 80.690263] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7>[ 80.690360] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7>[ 80.690445] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7>[ 80.690528] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7>[ 80.690859] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7>[ 80.690943] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7>[ 80.691018] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7>[ 80.691092] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7>[ 80.691412] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7>[ 80.691501] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7>[ 80.691584] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7>[ 80.691664] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7>[ 80.691957] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7>[ 80.692033] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7>[ 80.692108] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7>[ 80.692182] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7>[ 80.692256] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7>[ 80.692337] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7>[ 80.692409] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7>[ 80.692849] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7>[ 80.692988] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004551cf <7>[ 80.693070] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7>[ 80.693149] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7>[ 80.693224] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 80.693298] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cac <7>[ 80.693392] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 80.693468] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 80.693542] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 80.693614] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 80.693682] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 80.693748] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 80.693815] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 80.693882] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 80.693946] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 80.694035] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7>[ 80.694238] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7>[ 80.695400] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0x1708000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 80.698272] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7>[ 80.715009] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 49152) <7>[ 80.725491] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 80.725833] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 80.727254] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4144 dwords <7>[ 80.727395] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7>[ 80.727516] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7>[ 80.727618] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7>[ 80.727715] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7>[ 80.727788] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7>[ 80.727860] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7>[ 80.727932] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7>[ 80.728006] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000 (MCR) <7>[ 80.731043] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7>[ 80.731138] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606 <7>[ 80.731224] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7>[ 80.734755] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7>[ 80.734850] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6>[ 80.738924] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.58.0 <7>[ 80.745753] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x017f11cf <7>[ 80.745872] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 80.745957] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7>[ 80.746039] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 80.746118] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000043e4 <7>[ 80.746197] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 80.746274] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 80.746413] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 80.746513] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 80.746609] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 80.746682] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 80.746753] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 80.746822] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 80.746890] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6>[ 80.748190] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6>[ 80.750320] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6>[ 80.751385] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7>[ 80.751515] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 80.751658] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7>[ 80.772327] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 80.772746] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 80.772928] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000,00000000 <7>[ 80.773090] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000,00000000 <7>[ 80.773251] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7>[ 80.773430] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7>[ 80.773581] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6>[ 80.773731] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6>[ 80.773733] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6>[ 80.773735] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6>[ 80.773736] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6>[ 80.773738] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6>[ 80.773739] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6>[ 80.773740] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6>[ 80.773742] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6>[ 80.773744] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6>[ 80.773745] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7>[ 80.773929] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7>[ 80.774141] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7>[ 80.774341] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7>[ 80.774533] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7>[ 80.774708] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7>[ 80.774872] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7>[ 80.775034] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7>[ 80.775195] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7>[ 80.775360] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7>[ 80.775507] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7>[ 80.775777] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7>[ 80.775911] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7>[ 80.776050] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7>[ 80.776185] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7>[ 80.776322] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7>[ 80.776450] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7>[ 80.776574] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7>[ 80.776697] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7>[ 80.776817] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7>[ 80.776952] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7>[ 80.777134] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7>[ 80.778207] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7>[ 80.778333] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7>[ 80.778448] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7>[ 80.778555] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7>[ 80.778659] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7>[ 80.778760] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7>[ 80.778859] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7>[ 80.778955] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xc50c] = 0x00010002 <7>[ 80.779051] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7>[ 80.779141] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7>[ 80.779230] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7>[ 80.779331] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7>[ 80.779426] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7>[ 80.779521] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7>[ 80.779613] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7>[ 80.779703] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7>[ 80.779790] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7>[ 80.779878] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7>[ 80.779961] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7>[ 80.780040] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7>[ 80.780118] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7>[ 80.780196] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7>[ 80.780278] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7>[ 80.780359] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7>[ 80.780441] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7>[ 80.780522] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7>[ 80.780601] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7>[ 80.780673] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7>[ 80.780746] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7>[ 80.780821] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7>[ 80.780909] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7>[ 80.780995] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7>[ 80.781079] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7>[ 80.781159] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7>[ 80.781240] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7>[ 80.781332] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7>[ 80.781419] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7>[ 80.781504] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7>[ 80.781587] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7>[ 80.781662] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7>[ 80.781737] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7>[ 80.782129] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7>[ 80.782226] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7>[ 80.782329] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7>[ 80.782419] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7>[ 80.782506] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7>[ 80.782589] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7>[ 80.782666] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7>[ 80.782741] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7>[ 80.782816] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7>[ 80.782892] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7>[ 80.782967] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7>[ 80.783041] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7>[ 80.783403] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7>[ 80.783495] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7>[ 80.783581] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7>[ 80.784139] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7>[ 80.784303] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x017f11cf <7>[ 80.784410] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 80.784498] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7>[ 80.784581] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 80.784654] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000043e4 <7>[ 80.784725] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 80.784794] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 80.784863] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 80.784930] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 80.784995] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 80.785060] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 80.785124] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 80.785187] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 80.785251] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7>[ 80.785358] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7>[ 80.785476] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7>[ 80.786754] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x2c63000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 80.805426] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 49152) <7>[ 80.826843] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 80.827330] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 80.828979] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7>[ 80.829180] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 80.832433] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7>[ 80.832617] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 80.836028] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7>[ 80.836303] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 80.879289] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7>[ 80.880413] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 80.880840] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 80.881335] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 80.881816] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 80.882752] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7>[ 80.883180] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7>[ 80.883627] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7>[ 80.885610] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 0: start 0x90008 <7>[ 80.886077] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 1: start 0x90108 <7>[ 80.886592] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 2: start 0x90208 <7>[ 80.887041] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 3: start 0x90308 <7>[ 80.887495] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 4: start 0x903c8 <7>[ 80.887920] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 0: start 0x98008 <7>[ 80.888388] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 1: start 0x98108 <7>[ 80.888821] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 2: start 0x98208 <7>[ 80.889278] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 3: start 0x98308 <7>[ 80.889662] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 4: start 0x983c8 <7>[ 80.890082] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 0: start 0x52008 <7>[ 80.890501] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 1: start 0x52108 <7>[ 80.890915] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 2: start 0x52208 <7>[ 80.891285] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 3: start 0x52308 <7>[ 80.891617] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 4: start 0x523c8 <7>[ 80.892571] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 80.892894] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 80.893220] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7>[ 80.893623] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: no [fastset] <7>[ 80.894000] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:388:pipe C] enable: no [fastset] <7>[ 80.895706] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7>[ 80.895921] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7>[ 80.897850] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe B] <7>[ 80.898213] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:388:pipe C] <7>[ 80.909163] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:392:eDP-1] adding connector to sysfs <7>[ 80.913408] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:392:eDP-1] backlight device intel_backlight registered <7>[ 80.913704] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:392:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 80.913932] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:392:eDP-1] Panel prepare <7>[ 80.914548] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 80.916039] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:392:eDP-1] generating connector hotplug event <7>[ 80.916113] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:401:DP-1] adding connector to sysfs <7>[ 80.916634] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7>[ 80.917288] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:401:DP-1] generating connector hotplug event <7>[ 80.917331] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:413:DP-2] adding connector to sysfs <7>[ 80.917742] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7>[ 80.918868] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:413:DP-2] generating connector hotplug event <7>[ 80.918919] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:421:DP-3] adding connector to sysfs <7>[ 80.919616] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 80.920449] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:421:DP-3] generating connector hotplug event <6>[ 80.920483] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7>[ 80.920521] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6>[ 80.931797] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 80.935872] input: Video Bus as /devices/pci0000:00/LNXVIDEO:00/input/input5 <7>[ 80.937643] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 80.937816] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7>[ 80.938467] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 80.938472] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 80.939828] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:34:plane 1A] no fb, skipping <7>[ 80.939970] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:269:pipe B] not active, skipping <7>[ 80.940102] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:388:pipe C] not active, skipping <6>[ 80.940369] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7>[ 80.941010] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:401:DP-1] <7>[ 80.941045] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 80.941213] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 80.941450] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:401:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 80.941616] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:413:DP-2] <7>[ 80.941791] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 80.941936] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:413:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 80.942077] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:421:DP-3] <7>[ 80.942251] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 80.942393] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:421:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 80.942529] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 80.942809] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7>[ 80.943099] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 80.943340] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:392:eDP-1] <7>[ 80.943347] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:392:eDP-1] <7>[ 80.943865] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 80.944195] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 80.944354] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 80.944493] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 80.944732] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 80.944737] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 80.944739] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 80.944741] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 80.944744] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 80.944746] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 80.944748] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] ELD monitor <5>[ 80.944752] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 80.944754] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] ELD size 20, SAD count 0 <5>[ 80.944757] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 80.944784] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:392:eDP-1] VRR capable: yes <7>[ 80.944942] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:392:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 80.945091] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:392:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 80.945470] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:392:eDP-1] status updated from unknown to connected <5>[ 80.945701] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 80.945703] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 80.945704] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 80.945735] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7>[ 80.945763] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:392:eDP-1] probed modes: <7>[ 80.945768] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 80.945772] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 80.945775] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:401:DP-1] <7>[ 80.945779] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:401:DP-1] <7>[ 80.945977] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:401:DP-1] disconnected <7>[ 80.945980] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:413:DP-2] <7>[ 80.945983] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:413:DP-2] <7>[ 80.946146] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:413:DP-2] disconnected <7>[ 80.946149] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:421:DP-3] <7>[ 80.946151] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:421:DP-3] <7>[ 80.946446] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 80.946453] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 80.947100] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 80.947788] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:421:DP-3] disconnected <7>[ 80.947792] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:392:eDP-1] enabled? yes <7>[ 80.947795] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:401:DP-1] enabled? no <7>[ 80.947796] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:413:DP-2] enabled? no <7>[ 80.947798] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:421:DP-3] enabled? no <7>[ 80.947866] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 80.947883] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:392:eDP-1] found preferred mode: 2880x1800 <7>[ 80.947885] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 80.947897] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0) <7>[ 80.947989] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 80.948003] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <6>[ 80.948111] xe 0000:00:02.0: [drm] Allocating fbdev: Stolen memory not preferred. <7>[ 80.954925] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb <6>[ 80.956015] fbcon: xedrmfb (fb0) is primary device <7>[ 80.957279] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:392:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 80.957479] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:391:DDI A/PHY A][CRTC:150:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7>[ 80.957655] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000 <7>[ 80.957830] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 80.957984] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:391:DDI A/PHY A] [CRTC:150:pipe A] <7>[ 80.958138] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288) <7>[ 80.958328] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in dpll_hw_state <7>[ 80.958476] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7>[ 80.958622] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 80.958767] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: yes, <7>[ 80.958908] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 40960, rem: 0, den: 1, <7>[ 80.959050] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 80.959190] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 80.959338] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 80.959475] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 80.959611] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 80.959746] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 80.959888] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 80.960023] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 80.960155] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7>[ 80.960916] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 80.961096] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: no, <7>[ 80.961300] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 80.961457] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 80.961589] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 80.961718] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 80.961849] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 80.961976] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 80.962104] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 80.962328] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 80.962474] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 80.962609] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000) <7>[ 80.962733] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0) <7>[ 80.962856] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7>[ 80.962980] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing DPLL 0 <7>[ 80.963159] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7>[ 80.963314] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 80.963444] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7>[ 80.963559] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7>[ 80.963672] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7>[ 80.963782] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 80.963888] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 80.963992] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 80.964094] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 80.964194] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 80.964310] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 80.964409] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 80.964516] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 80.964618] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 80.964712] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 80.964806] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 80.964899] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 80.964990] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 80.965082] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 80.965174] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 80.965290] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 80.965383] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:144:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 80.965479] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:144:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 80.965576] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:144:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 80.965677] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:144:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 80.965799] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 1390840 num active planes 1 <7>[ 80.965946] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7>[ 80.966088] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7>[ 80.966324] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 80.966473] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 80.966628] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7>[ 80.966847] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated DPLL 0 <7>[ 80.967006] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving DPLL 0 <7>[ 80.967155] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset] <7>[ 80.967312] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 80.967453] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 80.967594] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 80.967729] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 80.967863] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 80.968007] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 80.968135] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7>[ 80.968273] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 80.968405] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 80.968542] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 80.968662] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 80.968794] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 80.968924] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 80.969056] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7>[ 80.969187] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7>[ 80.969328] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7>[ 80.969459] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7>[ 80.969588] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7>[ 80.969717] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7>[ 80.969833] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 80.969948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 80.970060] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7>[ 80.970173] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 80.970298] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 80.970411] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 80.970524] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 80.970637] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 80.970748] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 80.970867] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 80.971003] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 80.971125] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 80.971263] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 80.971380] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 80.971495] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 80.971607] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 80.971729] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no, <7>[ 80.971855] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 80.971976] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 80.972087] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 80.972197] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 80.972391] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 80.972501] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 80.972608] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 80.972725] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 80.972831] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 80.972948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 80.973073] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 80.973205] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 80.973338] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 80.973454] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 80.973567] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 80.973681] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 80.973790] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 80.973900] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 80.974008] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 80.974117] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 80.974230] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 80.974336] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:393] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 80.974443] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 80.974548] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 80.974658] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7>[ 80.974766] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7>[ 80.974883] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7>[ 80.974999] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7>[ 80.975114] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no <6>[ 80.984895] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7>[ 80.985116] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7>[ 80.986012] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7>[ 80.986228] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7>[ 80.990982] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 80.991184] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 80.991360] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 80.991512] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 80.991655] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 80.991794] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 80.991930] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 80.992062] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 80.992192] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 80.992329] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 80.992460] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 80.992589] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 80.992717] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 80.992847] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 80.992975] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 80.993103] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 80.993235] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 80.993366] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 80.993495] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 80.993626] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 80.993753] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 80.993881] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 80.994007] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 80.994135] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 80.994266] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 80.994395] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 80.994523] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 80.994652] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 80.994779] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 80.994911] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 80.995040] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 80.995168] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 80.995310] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 80.995445] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 80.995572] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 80.995701] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <6>[ 81.000659] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 81.001962] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 81.003830] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 81.006338] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 81.008462] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7>[ 81.193583] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:392:eDP-1] set backlight PWM = 0 <7>[ 81.195804] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7>[ 81.198034] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turn panel power off <7>[ 81.198532] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 81.198557] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 81.199003] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - short <7>[ 81.199006] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 81.251117] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 81.251512] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - short <7>[ 81.259507] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 81.260022] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:391:DDI A/PHY A] <7>[ 81.260066] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:150:pipe A] <7>[ 81.260563] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:391:DDI A/PHY A] <7>[ 81.261469] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7>[ 81.261991] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7>[ 81.263095] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x1341b072) <7>[ 81.263959] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:391:DDI A/PHY A] <7>[ 81.264404] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:400:DDI TC1/PHY TC1] <7>[ 81.264805] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST A] <7>[ 81.265207] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST B] <7>[ 81.265643] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST C] <7>[ 81.266014] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:412:DDI TC2/PHY TC2] <7>[ 81.266454] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST A] <7>[ 81.266890] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST B] <7>[ 81.267319] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST C] <7>[ 81.267756] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:420:DDI TC3/PHY TC3] <7>[ 81.268184] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST A] <7>[ 81.268618] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST B] <7>[ 81.269010] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST C] <7>[ 81.269492] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 81.271267] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:150:pipe A] <7>[ 81.271789] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7>[ 81.274162] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turn panel power on <7>[ 81.274611] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 wait for panel power cycle (486 ms remaining) <7>[ 81.285635] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 81.286035] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - long <7>[ 81.286390] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 81.286740] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:391:DDI A/PHY A] <7>[ 81.416034] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7>[ 81.769322] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 81.847498] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 81.847953] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 81.848478] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 81.884671] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 81.885359] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - long <7>[ 81.885958] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 81.886614] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:391:DDI A/PHY A] <7>[ 81.985779] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 81.985762] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 81.985896] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 82.059202] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 82.059799] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turning VDD on <7>[ 82.060395] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 82.062696] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 82.064211] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 82.065130] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7>[ 82.066398] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 82.067839] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 82.069143] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 82.069606] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7>[ 82.071210] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 82.071656] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7>[ 82.072637] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7>[ 82.073308] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7>[ 82.073800] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7>[ 82.074398] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:392:eDP-1] set backlight PWM = 192000 <7>[ 82.090314] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7>[ 82.092635] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:392:eDP-1] <7>[ 82.093246] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A] <7>[ 82.095153] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 82.097044] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <6>[ 82.098835] Console: switching to colour frame buffer device 180x56 <7>[ 82.098612] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=192000/192000 <7>[ 82.099426] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:392:eDP-1] set backlight level = 192000 <7>[ 82.100142] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:392:eDP-1] set backlight PWM = 192000 <6>[ 82.131836] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7>[ 82.131864] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7>[ 82.132376] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7>[ 82.132779] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7>[ 82.133181] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7>[ 82.133529] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7>[ 82.133840] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7>[ 82.134260] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7>[ 82.134541] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7>[ 82.134804] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7>[ 82.135080] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7>[ 82.135325] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7>[ 82.135552] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7>[ 82.135773] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7>[ 82.136002] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7>[ 82.136212] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7>[ 82.136408] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7>[ 82.136598] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7>[ 82.136782] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7>[ 82.137167] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7>[ 82.137339] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7>[ 82.137502] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7>[ 82.137660] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7>[ 82.138390] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7>[ 82.138548] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7>[ 82.138731] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7>[ 82.138897] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x80000000) <7>[ 82.139076] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7>[ 82.139226] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xa0000000) <7>[ 82.139389] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7>[ 82.139524] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa8000000) <7>[ 82.139678] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 82.141969] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7>[ 82.144009] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 82.144167] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 82.144263] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 82.156758] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 82.156784] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 82.158034] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:392:eDP-1] <7>[ 82.158057] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:392:eDP-1] <7>[ 82.161561] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 82.162417] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 82.163157] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 82.163419] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 82.164209] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 82.164223] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 82.164227] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 82.164229] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 82.164235] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 82.164242] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 82.164246] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] ELD monitor <5>[ 82.164267] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 82.164271] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] ELD size 20, SAD count 0 <5>[ 82.164278] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 82.164331] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:392:eDP-1] VRR capable: yes <7>[ 82.164576] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:392:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 82.164812] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:392:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5>[ 82.165766] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 82.165771] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 82.165774] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 82.165929] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:392:eDP-1] probed modes: <7>[ 82.165947] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 82.165954] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 82.165962] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:401:DP-1] <7>[ 82.165970] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:401:DP-1] <7>[ 82.166321] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 82.166786] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:401:DP-1] disconnected <7>[ 82.166802] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:413:DP-2] <7>[ 82.166813] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:413:DP-2] <7>[ 82.167326] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 82.167540] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:413:DP-2] disconnected <7>[ 82.167546] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:421:DP-3] <7>[ 82.167551] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:421:DP-3] <7>[ 82.167812] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 82.168035] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:421:DP-3] disconnected <7>[ 82.168041] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:392:eDP-1] enabled? yes <7>[ 82.168046] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:401:DP-1] enabled? no <7>[ 82.168051] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:413:DP-2] enabled? no <7>[ 82.168054] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:421:DP-3] enabled? no <7>[ 82.168265] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 82.168309] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:392:eDP-1] found preferred mode: 2880x1800 <7>[ 82.168315] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 82.168376] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0) <7>[ 82.170292] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 82.170500] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 82.174345] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 82.208928] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 82.209518] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 82.210003] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 82.228717] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 82.229290] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 82.241283] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 82.241609] [IGT] xe_module_load: finished subtest load, SUCCESS <7>[ 82.242262] [IGT] xe_module_load: exiting, ret=0 <7>[ 82.257920] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 82.258361] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 82.258733] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 83.200808] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 83.200907] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 83.201045] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 84.673190] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turning VDD off <7>[ 84.673631] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067