igt@kms_flip@basic-flip-vs-wf_vblank@a-edp1 on bat-ptl-2@xe-4681-5bb4c677496179faf77e5c4f6fa0c2a44c4ee75d Test details

Detail	Value
Duration	1.86 seconds
Igt-Version	IGT-Version: 2.3-g13f307912 (x86_64) (Linux: 7.0.0-rc3-lgci-xe-xe-4681-5bb4c677496179faf-debug+ x86_64)
Out	Using IGT_SRANDOM=1773052841 for randomisation Opened device: /dev/dri/card0 Using monotonic timestamps Starting subtest: basic-flip-vs-wf_vblank Starting dynamic subtest: A-eDP1 1920x1200: 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa Expected frametime: 8333us; measured 8333.3us +- 3.156us accuracy 0.11% Event flip: expected 60, counted 60, passrate = 100.00%, encoder type 2 Event vblank: expected 60, counted 60, passrate = 100.00%, encoder type 2 Dynamic subtest A-eDP1: SUCCESS (1.860s)
Err	Starting subtest: basic-flip-vs-wf_vblank Starting dynamic subtest: A-eDP1 Dynamic subtest A-eDP1: SUCCESS (1.860s)
Dmesg	<6> [218.922574] Console: switching to colour dummy device 80x25 <6> [218.922960] [IGT] kms_flip: executing <7> [218.943099] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:DP-1] <7> [218.943124] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:520:DP-1] <7> [218.943578] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [218.943844] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:DP-1] disconnected <7> [218.944506] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] <7> [218.944516] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-2] <7> [218.944810] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [218.945045] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected <7> [218.945713] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] <7> [218.945723] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [218.946007] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [218.946228] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected <7> [218.946870] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] <7> [218.946880] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1] <7> [218.947233] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7> [218.951498] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected <7> [218.952516] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1] <7> [218.952527] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:511:eDP-1] <7> [218.953247] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.953818] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [218.954079] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000 <7> [218.954350] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000 <7> [218.954677] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz <7> [218.954693] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] DisplayID extension version 0x20, primary use 0x02 <7> [218.954701] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [218.954709] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD monitor <7> [218.954717] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD size 20, SAD count 0 <7> [218.954752] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] VRR capable: yes <7> [218.955006] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [218.955269] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [218.956025] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1] probed modes: <7> [218.956034] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa <7> [218.956043] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa <7> [218.956079] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:DP-1] <7> [218.956086] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:520:DP-1] <7> [218.956393] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:DP-1] disconnected <7> [218.956425] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] <7> [218.956434] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-2] <7> [218.956717] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected <7> [218.956743] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] <7> [218.956749] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [218.957029] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected <7> [218.957055] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] <7> [218.957061] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1] <7> [218.961363] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected <6> [218.962083] [IGT] kms_flip: starting subtest basic-flip-vs-wf_vblank <6> [218.966899] [IGT] kms_flip: starting dynamic subtest A-eDP1 <7> [218.968459] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:556] <7> [218.969151] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:559] <7> [219.097209] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A] <7> [219.097543] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [219.098031] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [219.098462] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [219.098852] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [219.099227] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8213845/8388608 link 684487/524288, found tu 0, data 0/0 link 0/0) <7> [219.099635] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [219.099995] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [219.100369] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [219.100722] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0) <7> [219.101070] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [219.101436] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0) <7> [219.101782] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0) <7> [219.102124] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0) <7> [219.102482] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1200, found 0) <7> [219.102824] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1203, found 0) <7> [219.103168] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1209, found 0) <7> [219.103524] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1271, found 0) <7> [219.103867] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1271, found 0) <7> [219.104207] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [219.104602] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0) <7> [219.104941] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [219.105293] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0) <7> [219.105631] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0) <7> [219.105969] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0) <7> [219.106326] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1200, found 0) <7> [219.106666] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1203, found 0) <7> [219.106986] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1209, found 0) <7> [219.107308] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1271, found 0) <7> [219.107613] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1271, found 0) <7> [219.107917] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [219.108221] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [219.108549] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [219.108856] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [219.109194] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [219.109545] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 317250, found 0) <7> [219.109879] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 317250, found 0) <7> [219.110183] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 243000, found 0) <7> [219.110510] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in vrr.guardband (expected 69, found 0) <7> [219.110816] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [219.111125] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing DPLL 0 <7> [219.111550] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [219.111805] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [219.112123] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4029) -> ( 0 - 0), size 4029 -> 0 <7> [219.112378] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb (4029 - 4096) -> ( 0 - 0), size 67 -> 0 <7> [219.112613] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [219.112840] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 1, 16, 17, 20, 20, 20, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [219.113059] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 16, 256, 272, 320, 320, 320, 0, 0, 30, 48, 62 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [219.113285] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 19, 283, 301, 353, 353, 353, 0, 0, 31, 54, 63 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [219.113545] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0 <7> [219.113904] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [219.114253] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [219.114610] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 42130 required 0 qgv_peak_bw: 38400 <7> [219.114952] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 45877 required 0 qgv_peak_bw: 38400 <7> [219.115293] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [219.115626] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:150:pipe A] min cdclk: 158625 kHz -> 0 kHz <7> [219.116009] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 19829 kHz -> 0 kHz <7> [219.116357] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [219.116687] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz <7> [219.116991] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [219.117348] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: no [modeset] <7> [219.117656] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [219.117958] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7> [219.118272] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7> [219.118571] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7> [219.118868] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7> [219.119166] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7> [219.119593] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [219.120578] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [219.120974] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [219.122030] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [219.122371] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [219.327440] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [219.330703] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:510:DDI A/PHY A] PPS 0 turn panel power off <7> [219.331153] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:510:DDI A/PHY A] PPS 0 wait for panel power off time <7> [219.331613] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:510:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [219.382473] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [219.382830] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:150:pipe A] <7> [219.383885] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [219.383978] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [219.384312] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:510:DDI A/PHY A] - long <7> [219.384403] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [219.384682] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [219.384865] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DDI A/PHY A] <7> [219.385130] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:510:DDI A/PHY A] <7> [219.385187] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:519:DDI TC1/PHY TC1] <7> [219.385509] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:521:DP-MST A] <7> [219.385796] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:522:DP-MST B] <7> [219.386071] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:523:DP-MST C] <7> [219.386365] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DP-MST D] <7> [219.386638] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:532:DDI TC2/PHY TC2] <7> [219.386908] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:534:DP-MST A] <7> [219.387175] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:535:DP-MST B] <7> [219.387461] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DP-MST C] <7> [219.387729] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DP-MST D] <7> [219.387994] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC3/PHY TC3] <7> [219.388271] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A] <7> [219.388540] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B] <7> [219.388806] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C] <7> [219.389070] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D] <7> [219.389349] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:550:DDI TC4/PHY TC4] <7> [219.389616] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:511:eDP-1] <7> [219.389962] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [219.390223] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [219.390496] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [219.390954] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [219.391332] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xaa000000) <7> [219.391762] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A] <7> [219.392087] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [219.392512] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [219.392806] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <7> [219.393665] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B] <7> [219.394072] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:388:pipe C] <7> [219.394418] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:507:pipe D] <7> [219.394760] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A] <7> [219.394833] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:511:eDP-1] <7> [219.395043] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:511:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [219.395498] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:510:DDI A/PHY A][CRTC:150:pipe A] DP link limits: pixel clock 317250 kHz DSC off max lanes 4 max rate 270000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [219.395852] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 243000 bpp input 24 compressed 0.0000 HDR no link rate required 951750 available 972000 <7> [219.396209] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [219.396603] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:510:DDI A/PHY A] [CRTC:150:pipe A] <7> [219.396981] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [219.397359] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [219.397719] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [219.398073] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [219.398440] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 8213845/8388608 link 684487/524288) <7> [219.398800] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [219.399150] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [219.399519] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [219.399870] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080) <7> [219.400215] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [219.400579] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080) <7> [219.400927] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968) <7> [219.401286] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000) <7> [219.401631] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1200) <7> [219.401976] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1203) <7> [219.402336] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1209) <7> [219.402684] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1271) <7> [219.402999] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1271) <7> [219.403324] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [219.403639] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080) <7> [219.403945] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [219.404230] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080) <7> [219.404596] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968) <7> [219.404869] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000) <7> [219.405135] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1200) <7> [219.405414] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1203) <7> [219.405682] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1209) <7> [219.405948] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1271) <7> [219.406213] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1271) <7> [219.406491] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [219.406756] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [219.407023] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [219.407298] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [219.407565] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [219.407829] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 317250) <7> [219.408092] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 317250) <7> [219.408367] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 0, found 243000) <7> [219.408634] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in vrr.guardband (expected 0, found 69) <7> [219.408899] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [219.409248] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [219.409468] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [219.409725] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4029), size 0 -> 4029 <7> [219.409909] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4029 - 4096), size 0 -> 67 <7> [219.410088] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [219.410285] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 17, 20, 20, 20, 0, 0, 0, 4, 0 <7> [219.410465] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 60, 240, 255, 300, 300, 300, 0, 0, 135, 60, 135 <7> [219.410641] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 121, 301, 361, 361, 361, 361, 0, 0, 136, 121, 136 <7> [219.410852] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 1269000 num active planes 1 <7> [219.411157] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1333 qgv_peak_bw: 38400 <7> [219.411470] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1333 qgv_peak_bw: 38400 <7> [219.411764] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 42130 required 1333 qgv_peak_bw: 38400 <7> [219.412055] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 45877 required 1333 qgv_peak_bw: 38400 <7> [219.412368] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1333 <7> [219.412404] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [219.412662] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:150:pipe A] min cdclk: 0 kHz -> 158625 kHz <7> [219.412883] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [219.412987] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 19829 kHz <7> [219.413235] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [219.413297] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [219.413587] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz <7> [219.413877] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [219.414198] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated DPLL 0 <7> [219.414461] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving DPLL 0 <7> [219.414718] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset] <7> [219.415028] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [219.415357] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [219.415669] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [219.416003] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [219.416351] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [219.416687] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [219.417022] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8213845, data_n: 8388608, link_m: 684487, link_n: 524288, tu: 64 <7> [219.417379] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [219.417715] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [219.418028] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [219.418343] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [219.418649] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [219.418933] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [219.419213] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [219.419509] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [219.419800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [219.420099] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [219.420412] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [219.420711] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [219.420995] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [219.421279] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [219.421555] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1271, vmax: 1271, flipline: 1271, pipeline full: 0, guardband: 69 vsync start: 68, vsync end: 62 <7> [219.421831] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1202, vmax vblank: 1202, vmin vtotal: 1271, vmax vtotal: 1271 <7> [219.422104] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [219.422392] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa <7> [219.422669] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa <7> [219.422943] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=317250, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1202-1271 vs=1203-1209 vt=1271, flags=0xa <7> [219.423219] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x40 0xa <7> [219.423504] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=317250, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1202-1271 vs=1203-1209 vt=1271, flags=0xa <7> [219.423781] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 243000, pipe src: 1920x1200+0+0, pixel rate 317250, min cdclk 158625 <7> [219.424055] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 53, ips linetime: 0 <7> [219.424344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [219.424616] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [219.424886] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [219.425157] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [219.425443] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes, <7> [219.425713] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 8192, rem: 0, den: 1, <7> [219.425981] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 253, tx_clk_div: 2. <7> [219.426263] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [219.426535] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [219.426805] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0xda, pll[3] = 0x1 <7> [219.427063] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [219.427327] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [219.427581] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x20, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x2 <7> [219.427833] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0x8f, pll[18] = 0xe6, pll[19] = 0x23 <7> [219.428085] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [219.428349] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [219.428600] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [219.428851] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [219.429101] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [219.429359] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [219.429610] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [219.429859] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [219.430108] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [219.430373] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [219.430625] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [219.430875] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [219.431124] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [219.431389] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:556] 1920x1200 format = XR24 little-endian (0x34325258) modifier = 0x100000000000009, visible: yes <7> [219.431646] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [219.431897] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1200.000000+0.000000+0.000000 dst: 1920x1200+0+0 <7> [219.432150] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7> [219.432413] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7> [219.432664] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7> [219.432913] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7> [219.433162] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7> [219.433935] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [219.434203] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [219.434579] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [219.434889] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000) <7> [219.435158] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 172800 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [219.435467] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [219.435684] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=432 <7> [219.435958] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DDI A/PHY A] <7> [219.436171] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:519:DDI TC1/PHY TC1] <7> [219.436386] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:521:DP-MST A] <7> [219.436583] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:522:DP-MST B] <7> [219.436774] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:523:DP-MST C] <7> [219.436963] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DP-MST D] <7> [219.437152] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:532:DDI TC2/PHY TC2] <7> [219.437354] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:534:DP-MST A] <7> [219.437542] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:535:DP-MST B] <7> [219.437728] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DP-MST C] <7> [219.437915] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DP-MST D] <7> [219.438115] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC3/PHY TC3] <7> [219.438327] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A] <7> [219.438529] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B] <7> [219.438730] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C] <7> [219.438926] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D] <7> [219.439112] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:550:DDI TC4/PHY TC4] <7> [219.439339] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [219.439670] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [219.439853] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7> [219.440077] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [219.441331] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:150:pipe A] <7> [219.441641] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [219.443429] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:510:DDI A/PHY A] PPS 0 turn panel power on <7> [219.443661] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:510:DDI A/PHY A] PPS 0 wait for panel power cycle (440 ms remaining) <7> [219.886534] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:510:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [219.917446] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [219.917862] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:510:DDI A/PHY A] PPS 0 wait for panel power on <7> [219.918215] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:510:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7> [219.943263] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [219.943714] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:510:DDI A/PHY A] - long <7> [219.944141] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7> [219.944690] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:510:DDI A/PHY A] <7> [219.974682] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7> [219.974760] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [219.974857] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [219.974985] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [220.122431] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [220.122902] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:510:DDI A/PHY A] PPS 0 turning VDD on <7> [220.123359] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:510:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7> [220.125767] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 0a c4 41 00 10 01 c0 02 00 00 00 1f 0b 80 <7> [220.127032] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:511:eDP-1][ENCODER:510:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [220.128114] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:511:eDP-1][ENCODER:510:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 02 <7> [220.129634] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:511:eDP-1][ENCODER:510:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [220.130900] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:511:eDP-1][ENCODER:510:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [220.132330] xe 0000:00:02.0: [drm:intel_dp_get_adjust_train [xe]] [CONNECTOR:511:eDP-1][ENCODER:510:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 0/0/0/0 <7> [220.132874] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:511:eDP-1][ENCODER:510:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 0/0/0/0 <7> [220.135122] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:511:eDP-1][ENCODER:510:DDI A/PHY A][DPRX] Clock recovery OK <7> [220.135695] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:511:eDP-1][ENCODER:510:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7> [220.137492] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:511:eDP-1][ENCODER:510:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [220.138021] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:511:eDP-1][ENCODER:510:DDI A/PHY A][DPRX] Link Training passed at link rate = 243000, lane count = 4 <7> [220.139200] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [220.139978] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [220.140564] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7> [220.148684] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [220.150843] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:511:eDP-1] <7> [220.151429] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A] <7> [220.171502] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [220.172200] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [220.172953] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [220.292707] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [220.293515] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [220.324488] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [220.325360] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [220.326040] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [220.383531] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [220.383983] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [220.408464] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [220.409170] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [220.409837] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [220.466876] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [220.467386] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [220.491461] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [220.492163] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [220.492818] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [220.550326] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [220.550812] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [220.574473] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [220.575182] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [220.575844] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [220.633649] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [220.634159] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [220.658456] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [220.659162] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [220.659819] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [220.716937] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [220.717448] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [220.741456] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [220.742136] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [220.742795] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [220.798994] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:559] from all active usage due to RMFB ioctl <7> [220.799139] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:559] is removed <7> [220.799375] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4029) -> ( 0 - 0), size 4029 -> 0 <7> [220.799713] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [220.799999] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 4, 16, 17, 20, 20, 20, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [220.800278] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 60, 240, 255, 300, 300, 300, 0, 0, 135, 60, 135 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [220.800530] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 121, 301, 361, 361, 361, 361, 0, 0, 136, 121, 136 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [220.800829] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0 <7> [220.801290] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [220.801733] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [220.802167] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 42130 required 0 qgv_peak_bw: 38400 <7> [220.802603] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 45877 required 0 qgv_peak_bw: 38400 <7> [220.803023] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [220.806392] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [220.806922] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [220.808923] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <6> [220.827782] [IGT] kms_flip: finished subtest A-eDP1, SUCCESS

<6> [218.922574] Console: switching to colour dummy device 80x25

<7> [218.943099] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:DP-1]

<7> [218.943124] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:520:DP-1]

<7> [218.943578] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [218.943844] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:DP-1] disconnected

<7> [218.944506] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2]

<7> [218.944516] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-2]

<7> [218.944810] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [218.945045] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected

<7> [218.945713] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]

<7> [218.945723] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [218.946007] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [218.946228] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected

<7> [218.946870] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]

<7> [218.946880] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]

<7> [218.947233] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4

<7> [218.951498] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected

<7> [218.952516] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1]

<7> [218.952527] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:511:eDP-1]

<7> [218.953247] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.953818] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [218.954079] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000

<7> [218.954350] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000

<7> [218.954677] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz

<7> [218.954693] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] DisplayID extension version 0x20, primary use 0x02

<7> [218.954701] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [218.954709] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD monitor

<7> [218.954717] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD size 20, SAD count 0

<7> [218.954752] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] VRR capable: yes

<7> [218.955006] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [218.955269] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [218.956025] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1] probed modes:

<7> [218.956034] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa

<7> [218.956043] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa

<7> [218.956079] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:DP-1]

<7> [218.956086] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:520:DP-1]

<7> [218.956393] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:DP-1] disconnected

<7> [218.956425] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2]

<7> [218.956434] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-2]

<7> [218.956717] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected

<7> [218.956743] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]

<7> [218.956749] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [218.957029] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected

<7> [218.957055] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]

<7> [218.957061] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]

<7> [218.961363] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected

<6> [218.962083] [IGT] kms_flip: starting subtest basic-flip-vs-wf_vblank

<6> [218.966899] [IGT] kms_flip: starting dynamic subtest A-eDP1

<7> [218.968459] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:556]

<7> [218.969151] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:559]

<7> [219.097209] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A]

<7> [219.097543] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [219.098031] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [219.098462] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [219.098852] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [219.099227] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8213845/8388608 link 684487/524288, found tu 0, data 0/0 link 0/0)

<7> [219.099635] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [219.099995] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [219.100369] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [219.100722] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0)

<7> [219.101070] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [219.101436] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0)

<7> [219.101782] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0)

<7> [219.102124] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0)

<7> [219.102482] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1200, found 0)

<7> [219.102824] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1203, found 0)

<7> [219.103168] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1209, found 0)

<7> [219.103524] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1271, found 0)

<7> [219.103867] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1271, found 0)

<7> [219.104207] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [219.104602] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0)

<7> [219.104941] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [219.105293] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0)

<7> [219.105631] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0)

<7> [219.105969] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0)

<7> [219.106326] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1200, found 0)

<7> [219.106666] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1203, found 0)

<7> [219.106986] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1209, found 0)

<7> [219.107308] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1271, found 0)

<7> [219.107613] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1271, found 0)

<7> [219.107917] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [219.108221] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [219.108549] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [219.108856] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [219.109194] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [219.109545] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 317250, found 0)

<7> [219.109879] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 317250, found 0)

<7> [219.110183] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 243000, found 0)

<7> [219.110510] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in vrr.guardband (expected 69, found 0)

<7> [219.110816] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [219.111125] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing DPLL 0

<7> [219.111550] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [219.111805] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [219.112123] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4029) -> ( 0 - 0), size 4029 -> 0

<7> [219.112378] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb (4029 - 4096) -> ( 0 - 0), size 67 -> 0

<7> [219.112613] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [219.112840] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 1, 16, 17, 20, 20, 20, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [219.113059] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 16, 256, 272, 320, 320, 320, 0, 0, 30, 48, 62 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [219.113285] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 19, 283, 301, 353, 353, 353, 0, 0, 31, 54, 63 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [219.113545] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0

<7> [219.113904] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [219.114253] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [219.114610] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 42130 required 0 qgv_peak_bw: 38400

<7> [219.114952] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 45877 required 0 qgv_peak_bw: 38400

<7> [219.115293] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [219.115626] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:150:pipe A] min cdclk: 158625 kHz -> 0 kHz

<7> [219.116009] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 19829 kHz -> 0 kHz

<7> [219.116357] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [219.116687] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz

<7> [219.116991] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [219.117348] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: no [modeset]

<7> [219.117656] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [219.117958] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no

<7> [219.118272] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no

<7> [219.118571] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no

<7> [219.118868] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no

<7> [219.119166] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no

<7> [219.119593] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [219.120578] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [219.120974] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [219.122030] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [219.122371] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [219.327440] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [219.330703] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:510:DDI A/PHY A] PPS 0 turn panel power off

<7> [219.331153] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:510:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [219.331613] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:510:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [219.382473] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [219.382830] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:150:pipe A]

<7> [219.383885] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [219.383978] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [219.384312] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:510:DDI A/PHY A] - long

<7> [219.384403] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [219.384682] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [219.384865] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DDI A/PHY A]

<7> [219.385130] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:510:DDI A/PHY A]

<7> [219.385187] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:519:DDI TC1/PHY TC1]

<7> [219.385509] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:521:DP-MST A]

<7> [219.385796] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:522:DP-MST B]

<7> [219.386071] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:523:DP-MST C]

<7> [219.386365] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DP-MST D]

<7> [219.386638] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:532:DDI TC2/PHY TC2]

<7> [219.386908] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:534:DP-MST A]

<7> [219.387175] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:535:DP-MST B]

<7> [219.387461] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DP-MST C]

<7> [219.387729] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DP-MST D]

<7> [219.387994] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC3/PHY TC3]

<7> [219.388271] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A]

<7> [219.388540] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B]

<7> [219.388806] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C]

<7> [219.389070] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D]

<7> [219.389349] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:550:DDI TC4/PHY TC4]

<7> [219.389616] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:511:eDP-1]

<7> [219.389962] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [219.390223] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [219.390496] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [219.390954] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A

<7> [219.391332] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xaa000000)

<7> [219.391762] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A]

<7> [219.392087] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [219.392512] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [219.392806] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<7> [219.393665] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]

<7> [219.394072] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:388:pipe C]

<7> [219.394418] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:507:pipe D]

<7> [219.394760] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A]

<7> [219.394833] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:511:eDP-1]

<7> [219.395043] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:511:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [219.395498] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:510:DDI A/PHY A][CRTC:150:pipe A] DP link limits: pixel clock 317250 kHz DSC off max lanes 4 max rate 270000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [219.395852] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 243000 bpp input 24 compressed 0.0000 HDR no link rate required 951750 available 972000

<7> [219.396209] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [219.396603] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:510:DDI A/PHY A] [CRTC:150:pipe A]

<7> [219.396981] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [219.397359] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [219.397719] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [219.398073] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [219.398440] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 8213845/8388608 link 684487/524288)

<7> [219.398800] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [219.399150] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [219.399519] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [219.399870] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080)

<7> [219.400215] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [219.400579] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080)

<7> [219.400927] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968)

<7> [219.401286] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000)

<7> [219.401631] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1200)

<7> [219.401976] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1203)

<7> [219.402336] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1209)

<7> [219.402684] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1271)

<7> [219.402999] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1271)

<7> [219.403324] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [219.403639] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080)

<7> [219.403945] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [219.404230] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080)

<7> [219.404596] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968)

<7> [219.404869] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000)

<7> [219.405135] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1200)

<7> [219.405414] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1203)

<7> [219.405682] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1209)

<7> [219.405948] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1271)

<7> [219.406213] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1271)

<7> [219.406491] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [219.406756] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [219.407023] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [219.407298] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [219.407565] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [219.407829] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 317250)

<7> [219.408092] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 317250)

<7> [219.408367] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 0, found 243000)

<7> [219.408634] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in vrr.guardband (expected 0, found 69)

<7> [219.408899] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [219.409248] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [219.409468] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [219.409725] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4029), size 0 -> 4029

<7> [219.409909] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4029 - 4096), size 0 -> 67

<7> [219.410088] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [219.410285] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 17, 20, 20, 20, 0, 0, 0, 4, 0

<7> [219.410465] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 60, 240, 255, 300, 300, 300, 0, 0, 135, 60, 135

<7> [219.410641] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 121, 301, 361, 361, 361, 361, 0, 0, 136, 121, 136

<7> [219.410852] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 1269000 num active planes 1

<7> [219.411157] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1333 qgv_peak_bw: 38400

<7> [219.411470] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1333 qgv_peak_bw: 38400

<7> [219.411764] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 42130 required 1333 qgv_peak_bw: 38400

<7> [219.412055] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 45877 required 1333 qgv_peak_bw: 38400

<7> [219.412368] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1333

<7> [219.412404] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [219.412662] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:150:pipe A] min cdclk: 0 kHz -> 158625 kHz

<7> [219.412883] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [219.412987] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 19829 kHz

<7> [219.413235] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [219.413297] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [219.413587] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz

<7> [219.413877] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [219.414198] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated DPLL 0

<7> [219.414461] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving DPLL 0

<7> [219.414718] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset]

<7> [219.415028] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [219.415357] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [219.415669] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [219.416003] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [219.416351] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [219.416687] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [219.417022] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8213845, data_n: 8388608, link_m: 684487, link_n: 524288, tu: 64

<7> [219.417379] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [219.417715] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [219.418028] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [219.418343] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [219.418649] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [219.418933] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [219.419213] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [219.419509] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [219.419800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [219.420099] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [219.420412] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [219.420711] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [219.420995] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [219.421279] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [219.421555] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1271, vmax: 1271, flipline: 1271, pipeline full: 0, guardband: 69 vsync start: 68, vsync end: 62

<7> [219.421831] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1202, vmax vblank: 1202, vmin vtotal: 1271, vmax vtotal: 1271

<7> [219.422104] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [219.422392] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa

<7> [219.422669] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa

<7> [219.422943] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=317250, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1202-1271 vs=1203-1209 vt=1271, flags=0xa

<7> [219.423219] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x40 0xa

<7> [219.423504] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=317250, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1202-1271 vs=1203-1209 vt=1271, flags=0xa

<7> [219.423781] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 243000, pipe src: 1920x1200+0+0, pixel rate 317250, min cdclk 158625

<7> [219.424055] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 53, ips linetime: 0

<7> [219.424344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [219.424616] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [219.424886] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [219.425157] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [219.425443] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes,

<7> [219.425713] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 8192, rem: 0, den: 1,

<7> [219.425981] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 253, tx_clk_div: 2.

<7> [219.426263] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [219.426535] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [219.426805] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0xda, pll[3] = 0x1

<7> [219.427063] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [219.427327] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [219.427581] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x20, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x2

<7> [219.427833] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0x8f, pll[18] = 0xe6, pll[19] = 0x23

<7> [219.428085] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [219.428349] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [219.428600] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [219.428851] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [219.429101] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [219.429359] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [219.429610] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [219.429859] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [219.430108] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [219.430373] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [219.430625] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [219.430875] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [219.431124] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [219.431389] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:556] 1920x1200 format = XR24 little-endian (0x34325258) modifier = 0x100000000000009, visible: yes

<7> [219.431646] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [219.431897] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1200.000000+0.000000+0.000000 dst: 1920x1200+0+0

<7> [219.432150] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no

<7> [219.432413] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no

<7> [219.432664] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no

<7> [219.432913] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no

<7> [219.433162] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no

<7> [219.433935] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [219.434203] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [219.434579] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [219.434889] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000)

<7> [219.435158] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 172800 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [219.435467] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [219.435684] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=432

<7> [219.435958] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DDI A/PHY A]

<7> [219.436171] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:519:DDI TC1/PHY TC1]

<7> [219.436386] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:521:DP-MST A]

<7> [219.436583] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:522:DP-MST B]

<7> [219.436774] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:523:DP-MST C]

<7> [219.436963] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DP-MST D]

<7> [219.437152] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:532:DDI TC2/PHY TC2]

<7> [219.437354] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:534:DP-MST A]

<7> [219.437542] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:535:DP-MST B]

<7> [219.437728] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DP-MST C]

<7> [219.437915] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DP-MST D]

<7> [219.438115] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC3/PHY TC3]

<7> [219.438327] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A]

<7> [219.438529] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B]

<7> [219.438730] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C]

<7> [219.438926] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D]

<7> [219.439112] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:550:DDI TC4/PHY TC4]

<7> [219.439339] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [219.439670] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [219.439853] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)

<7> [219.440077] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [219.441331] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:150:pipe A]

<7> [219.441641] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [219.443429] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:510:DDI A/PHY A] PPS 0 turn panel power on

<7> [219.443661] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:510:DDI A/PHY A] PPS 0 wait for panel power cycle (440 ms remaining)

<7> [219.886534] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:510:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [219.917446] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [219.917862] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:510:DDI A/PHY A] PPS 0 wait for panel power on

<7> [219.918215] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:510:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063

<7> [219.943263] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [219.943714] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:510:DDI A/PHY A] - long

<7> [219.944141] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20

<7> [219.944690] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:510:DDI A/PHY A]

<7> [219.974682] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port G/TC#4: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4

<7> [219.974760] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [219.974857] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [219.974985] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [220.122431] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [220.122902] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:510:DDI A/PHY A] PPS 0 turning VDD on

<7> [220.123359] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:510:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b

<7> [220.125767] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 0a c4 41 00 10 01 c0 02 00 00 00 1f 0b 80

<7> [220.127032] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:511:eDP-1][ENCODER:510:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [220.128114] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:511:eDP-1][ENCODER:510:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 02

<7> [220.129634] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:511:eDP-1][ENCODER:510:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [220.130900] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:511:eDP-1][ENCODER:510:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [220.132330] xe 0000:00:02.0: [drm:intel_dp_get_adjust_train [xe]] [CONNECTOR:511:eDP-1][ENCODER:510:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 0/0/0/0

<7> [220.132874] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:511:eDP-1][ENCODER:510:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 0/0/0/0

<7> [220.135122] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:511:eDP-1][ENCODER:510:DDI A/PHY A][DPRX] Clock recovery OK

<7> [220.135695] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:511:eDP-1][ENCODER:510:DDI A/PHY A][DPRX] Using DP training pattern TPS3

<7> [220.137492] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:511:eDP-1][ENCODER:510:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [220.138021] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:511:eDP-1][ENCODER:510:DDI A/PHY A][DPRX] Link Training passed at link rate = 243000, lane count = 4

<7> [220.139200] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [220.139978] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [220.140564] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A

<7> [220.148684] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [220.150843] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:511:eDP-1]

<7> [220.151429] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A]

<7> [220.171502] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [220.172200] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [220.172953] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [220.292707] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [220.293515] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [220.324488] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [220.325360] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [220.326040] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [220.383531] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [220.383983] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [220.408464] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [220.409170] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [220.409837] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [220.466876] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [220.467386] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [220.491461] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [220.492163] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [220.492818] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [220.550326] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [220.550812] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [220.574473] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [220.575182] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [220.575844] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [220.633649] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [220.634159] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [220.658456] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [220.659162] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [220.659819] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [220.716937] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [220.717448] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [220.741456] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [220.742136] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [220.742795] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [220.798994] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:559] from all active usage due to RMFB ioctl

<7> [220.799139] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:559] is removed

<7> [220.799375] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4029) -> ( 0 - 0), size 4029 -> 0

<7> [220.799713] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [220.799999] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 4, 16, 17, 20, 20, 20, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [220.800278] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 60, 240, 255, 300, 300, 300, 0, 0, 135, 60, 135 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [220.800530] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 121, 301, 361, 361, 361, 361, 0, 0, 136, 121, 136 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [220.800829] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0

<7> [220.801290] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [220.801733] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [220.802167] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 42130 required 0 qgv_peak_bw: 38400

<7> [220.802603] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 45877 required 0 qgv_peak_bw: 38400

<7> [220.803023] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [220.806392] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [220.806922] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [220.808923] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<6> [220.827782] [IGT] kms_flip: finished subtest A-eDP1, SUCCESS

Results for igt@kms_flip@basic-flip-vs-wf_vblank@a-edp1