<5>[ 0.000000] Linux version 7.0.0-rc2-lgci-xe-xe-4680-2590b5b38b7b67f86-debug+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04.1) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Mon Mar 9 08:38:36 UTC 2026 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x0000000080800000-0x00000000bfffffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x00000000d0000000-0x00000000fed1ffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x00000000fed80000-0x00000000ff1fffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] System RAM <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x69916018 ESRT=0x68ff8518 MOKvar=0x6ccfb000 <6>[ 0.000000] efi: Remove mem257: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] device reserved <6>[ 0.000000] efi: Remove mem259: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] device reserved <6>[ 0.000000] SMBIOS 3.8 present. <6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D99.2508051732 08/05/2025 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3100.000 MHz processor <6>[ 0.000000] tsc: Detected 3110.400 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] System RAM ==> device reserved <7>[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] System RAM <6>[ 0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000017] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs <6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000378] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000379] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.004877] esrt: Reserving ESRT space from 0x0000000068ff8518 to 0x0000000068ff8668. <7>[ 0.004885] e820: update [mem 0x68ff8000-0x68ff8fff] System RAM ==> device reserved <6>[ 0.004903] Using GB pages for direct mapping <6>[ 0.005575] printk: log buffer data + meta data: 1048576 + 4456448 = 5505024 bytes <6>[ 0.005576] printk: early log buf free: 258480(98%) <6>[ 0.005577] Secure boot disabled <6>[ 0.005579] ACPI: Early table checksum verification disabled <6>[ 0.005582] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.005584] ACPI: XSDT 0x000000006FF70228 000194 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005588] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013) <6>[ 0.005591] ACPI: DSDT 0x000000006FFB6000 02555F (v02 INTEL LNL 00000002 01000013) <6>[ 0.005593] ACPI: FACS 0x000000006FEF1000 000040 <6>[ 0.005594] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005596] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005597] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005598] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005600] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005601] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005602] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005604] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005605] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005606] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005608] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000) <6>[ 0.005609] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005611] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005612] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930) <6>[ 0.005613] ACPI: SSDT 0x000000006FFDD000 009176 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005615] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005616] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930) <6>[ 0.005617] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005619] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005620] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005621] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005623] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013) <6>[ 0.005624] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013) <6>[ 0.005625] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930) <6>[ 0.005627] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005628] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930) <6>[ 0.005629] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930) <6>[ 0.005631] ACPI: LPIT 0x000000006FF85000 0000CC (v01 INTEL LNL 00000002 01000013) <6>[ 0.005632] ACPI: SSDT 0x000000006FF84000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005633] ACPI: SSDT 0x000000006FF83000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005635] ACPI: DBGP 0x000000006FF82000 000034 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005636] ACPI: DBG2 0x000000006FF81000 000054 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005637] ACPI: NHLT 0x000000006FF80000 0002E3 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005638] ACPI: SSDT 0x000000006FF7E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005640] ACPI: SSDT 0x000000006FF77000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005641] ACPI: ECDT 0x000000006FF76000 000069 (v01 LNL 00000002 01000013) <6>[ 0.005642] ACPI: DMAR 0x000000006FF75000 0000D8 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005644] ACPI: FPDT 0x000000006FF74000 000044 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005645] ACPI: SSDT 0x000000006FF73000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930) <6>[ 0.005647] ACPI: SSDT 0x000000006FF71000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005648] ACPI: SSDT 0x000000006FF6D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005649] ACPI: SDEV 0x000000006FFA8000 000046 (v01 00000000 00000000) <6>[ 0.005651] ACPI: SSDT 0x000000006FF62000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930) <6>[ 0.005652] ACPI: PHAT 0x000000006FF61000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D) <6>[ 0.005653] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005654] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113] <6>[ 0.005655] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb55e] <6>[ 0.005656] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f] <6>[ 0.005656] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387] <6>[ 0.005656] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9] <6>[ 0.005657] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa] <6>[ 0.005657] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.005657] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.005658] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.005658] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.005658] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.005658] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.005659] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6] <6>[ 0.005659] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f] <6>[ 0.005659] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1] <6>[ 0.005660] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f] <6>[ 0.005660] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4] <6>[ 0.005660] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6175] <6>[ 0.005660] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df] <6>[ 0.005661] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2] <6>[ 0.005661] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e] <6>[ 0.005661] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955] <6>[ 0.005662] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037] <6>[ 0.005662] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027] <6>[ 0.005662] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7] <6>[ 0.005663] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b] <6>[ 0.005663] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2] <6>[ 0.005663] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320] <6>[ 0.005663] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469] <6>[ 0.005664] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815] <6>[ 0.005664] ACPI: Reserving LPIT table memory at [mem 0x6ff85000-0x6ff850cb] <6>[ 0.005664] ACPI: Reserving SSDT table memory at [mem 0x6ff84000-0x6ff84d5b] <6>[ 0.005665] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff831ef] <6>[ 0.005665] ACPI: Reserving DBGP table memory at [mem 0x6ff82000-0x6ff82033] <6>[ 0.005665] ACPI: Reserving DBG2 table memory at [mem 0x6ff81000-0x6ff81053] <6>[ 0.005666] ACPI: Reserving NHLT table memory at [mem 0x6ff80000-0x6ff802e2] <6>[ 0.005666] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff7f15b] <6>[ 0.005666] ACPI: Reserving SSDT table memory at [mem 0x6ff77000-0x6ff7d53a] <6>[ 0.005666] ACPI: Reserving ECDT table memory at [mem 0x6ff76000-0x6ff76068] <6>[ 0.005667] ACPI: Reserving DMAR table memory at [mem 0x6ff75000-0x6ff750d7] <6>[ 0.005667] ACPI: Reserving FPDT table memory at [mem 0x6ff74000-0x6ff74043] <6>[ 0.005667] ACPI: Reserving SSDT table memory at [mem 0x6ff73000-0x6ff7386c] <6>[ 0.005668] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff723da] <6>[ 0.005668] ACPI: Reserving SSDT table memory at [mem 0x6ff6d000-0x6ff6f462] <6>[ 0.005668] ACPI: Reserving SDEV table memory at [mem 0x6ffa8000-0x6ffa8045] <6>[ 0.005669] ACPI: Reserving SSDT table memory at [mem 0x6ff62000-0x6ff6c4f9] <6>[ 0.005669] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff617bf] <6>[ 0.005669] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037] <6>[ 0.005741] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.005943] No NUMA configuration found <6>[ 0.005943] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff] <6>[ 0.005948] NODE_DATA(0) allocated [mem 0x87f292e40-0x87f2bdfff] <6>[ 0.006504] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.006508] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.006557] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.006558] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.006560] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.006562] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.006562] ACPI: HPET id: 0x8086a701 base: 0xfed00000 <7>[ 0.006570] e820: update [mem 0x6992d000-0x69947fff] System RAM ==> device reserved <6>[ 0.006575] TSC deadline timer available <6>[ 0.006576] CPU topo: Max. logical packages: 1 <6>[ 0.006577] CPU topo: Max. logical dies: 1 <6>[ 0.006577] CPU topo: Max. dies per package: 1 <6>[ 0.006578] CPU topo: Max. threads per core: 1 <6>[ 0.006579] CPU topo: Num. cores per package: 8 <6>[ 0.006579] CPU topo: Num. threads per package: 8 <6>[ 0.006579] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs <6>[ 0.006591] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.006592] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.006593] PM: hibernation: Registered nosave memory: [mem 0x68ff8000-0x68ff8fff] <6>[ 0.006593] PM: hibernation: Registered nosave memory: [mem 0x6992d000-0x69947fff] <6>[ 0.006594] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fffefff] <6>[ 0.006595] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x1044fffff] <6>[ 0.006596] [gap 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.006597] Booting paravirtualized kernel on bare hardware <6>[ 0.006599] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.006636] Zone ranges: <6>[ 0.006636] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006637] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006638] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.006639] Device empty <6>[ 0.006639] Movable zone start for each node <6>[ 0.006640] Early memory node ranges <6>[ 0.006640] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006641] node 0: [mem 0x0000000000100000-0x000000006cac0fff] <6>[ 0.006642] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.006642] node 0: [mem 0x0000000104500000-0x000000087f7fffff] <6>[ 0.006644] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.006649] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006664] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.008252] On node 0, zone DMA32: 13630 pages in unavailable ranges <6>[ 0.036061] On node 0, zone Normal: 17664 pages in unavailable ranges <6>[ 0.036068] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.036076] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 <6>[ 0.036405] percpu: Embedded 87 pages/cpu s233472 r8192 d114688 u524288 <7>[ 0.036410] pcpu-alloc: s233472 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.036412] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 <5>[ 0.036425] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.036526] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.036543] random: crng init done <6>[ 0.038378] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.039279] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.039339] software IO TLB: area num 8. <6>[ 0.046685] Fallback order for Node 0: 0 <6>[ 0.046688] Built 1 zonelists, mobility grouping on. Total pages: 8289632 <6>[ 0.046689] Policy zone: Normal <6>[ 0.046698] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.046699] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.046702] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.047612] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.079601] ********************************************************** <4>[ 0.079602] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.079602] ** ** <4>[ 0.079603] ** This system shows unhashed kernel memory addresses ** <4>[ 0.079603] ** via the console, logs, and other interfaces. This ** <4>[ 0.079603] ** might reduce the security of your system. ** <4>[ 0.079603] ** ** <4>[ 0.079604] ** If you see this message and you are not debugging ** <4>[ 0.079604] ** the kernel, report this immediately to your system ** <4>[ 0.079604] ** administrator! ** <4>[ 0.079604] ** ** <4>[ 0.079604] ** Use hash_pointers=always to force this mode off ** <4>[ 0.079604] ** ** <4>[ 0.079605] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.079605] ********************************************************** <6>[ 0.080732] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 0.089201] ftrace: allocating 61420 entries in 240 pages <6>[ 0.089203] ftrace: allocated 240 pages with 4 groups <6>[ 0.090251] Dynamic Preempt: lazy <6>[ 0.090762] Running RCU self tests <6>[ 0.090762] Running RCU synchronous self tests <6>[ 0.090763] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.090763] rcu: RCU lockdep checking is enabled. <6>[ 0.090763] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. <6>[ 0.090764] Trampoline variant of Tasks RCU enabled. <6>[ 0.090764] Rude variant of Tasks RCU enabled. <6>[ 0.090764] Tracing variant of Tasks RCU enabled. <6>[ 0.090765] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.090765] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 <6>[ 0.090831] Running RCU synchronous self tests <6>[ 0.090835] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.090837] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.102225] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 <6>[ 0.102703] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.103143] Console: colour dummy device 80x25 <6>[ 0.103152] printk: legacy console [tty0] enabled <6>[ 0.104362] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.104370] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.104374] ... MAX_LOCK_DEPTH: 48 <6>[ 0.104378] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.104381] ... CLASSHASH_SIZE: 4096 <6>[ 0.104385] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.104389] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.104393] ... CHAINHASH_SIZE: 262144 <6>[ 0.104397] memory used by lock dependency info: 54145 kB <6>[ 0.104401] memory used for stack traces: 4224 kB <6>[ 0.104405] per task-struct memory footprint: 1920 bytes <6>[ 0.104457] ACPI: Core revision 20251212 <6>[ 0.105365] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.105429] APIC: Switch to symmetric I/O mode setup <6>[ 0.105435] DMAR: Host address width 38 <6>[ 0.105439] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.105475] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.105507] DMAR: DRHD base: 0x000000fc810000 flags: 0x0 <6>[ 0.105529] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.105556] DMAR: DRHD base: 0x000000fc820000 flags: 0x1 <6>[ 0.105578] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda <6>[ 0.105615] DMAR: SATC flags: 0x1 <6>[ 0.105626] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2 <6>[ 0.105631] DMAR-IR: HPET id 0 under DRHD base 0xfc820000 <6>[ 0.105636] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.107664] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.112895] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 0.112914] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400) <6>[ 0.112988] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.112994] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.113172] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.113177] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.113186] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.113198] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.113205] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.113210] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.113215] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.113223] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.113238] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.113245] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.113250] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.113254] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.113261] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.113267] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.113273] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.113279] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.113284] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.113290] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.113296] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.113908] Freeing SMP alternatives memory: 56K <6>[ 0.113908] pid_max: default: 32768 minimum: 301 <6>[ 0.113908] landlock: Up and running. <6>[ 0.113908] Yama: becoming mindful. <6>[ 0.113908] AppArmor: AppArmor initialized <6>[ 0.113908] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.113908] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.113908] VFS: Finished mounting rootfs on nullfs <6>[ 0.113908] Running RCU synchronous self tests <6>[ 0.113908] Running RCU synchronous self tests <6>[ 0.113908] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1) <6>[ 0.113908] Performance Events: XSAVE Architectural LBR, PEBS fmt6+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.113973] core: cpu_core PMU driver: <6>[ 0.113981] ... version: 6 <6>[ 0.113985] ... bit width: 48 <6>[ 0.113988] ... generic counters: 10 <6>[ 0.113992] ... generic bitmap: 00000000000003ff <6>[ 0.113997] ... fixed-purpose counters: 4 <6>[ 0.114000] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.114005] ... value mask: 0000ffffffffffff <6>[ 0.114009] ... max period: 00007fffffffffff <6>[ 0.114014] ... global_ctrl mask: 0001000f000003ff <6>[ 0.114089] signal: max sigframe size: 3632 <6>[ 0.114113] Estimated ratio of average max frequency by base frequency (times 1024): 1189 <6>[ 0.114222] rcu: Hierarchical SRCU implementation. <6>[ 0.114227] rcu: Max phase no-delay instances is 400. <6>[ 0.114383] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.116378] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.116658] smp: Bringing up secondary CPUs ... <6>[ 0.117023] smpboot: x86: Booting SMP configuration: <6>[ 0.117029] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 <6>[ 0.011019] core: The event 0x5d0 is not supported as an auto-counter reload event. <6>[ 0.011019] core: cpu_atom PMU driver: <6>[ 0.011019] ... version: 6 <6>[ 0.011019] ... bit width: 48 <6>[ 0.011019] ... generic counters: 8 <6>[ 0.011019] ... generic bitmap: 00000000000000ff <6>[ 0.011019] ... fixed-purpose counters: 6 <6>[ 0.011019] ... fixed-purpose bitmap: 0000000000000077 <6>[ 0.011019] ... value mask: 0000ffffffffffff <6>[ 0.011019] ... max period: 00007fffffffffff <6>[ 0.011019] ... global_ctrl mask: 00000077000000ff <6>[ 0.125004] smp: Brought up 1 node, 8 CPUs <6>[ 0.125287] smpboot: Total of 8 processors activated (49766.40 BogoMIPS) <6>[ 0.127091] Memory: 32356704K/33158528K available (25919K kernel code, 5834K rwdata, 9720K rodata, 5764K init, 67904K bss, 777992K reserved, 0K cma-reserved) <6>[ 0.127483] devtmpfs: initialized <6>[ 0.128186] x86/mm: Memory block size: 128MB <6>[ 0.151210] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes) <6>[ 0.152198] Running RCU synchronous self tests <6>[ 0.152230] Running RCU synchronous self tests <6>[ 0.152938] Running RCU Tasks wait API self tests <6>[ 0.153059] Running RCU Tasks Rude wait API self tests <6>[ 0.153059] Running RCU Tasks Trace wait API self tests <6>[ 0.153059] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.153059] posixtimers hash table entries: 4096 (order: 7, 294912 bytes, linear) <6>[ 0.153931] futex hash table entries: 2048 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear). <6>[ 0.155114] PM: RTC time: 12:20:53, date: 2026-03-09 <6>[ 0.155848] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.157056] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.157357] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.157644] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.157712] audit: initializing netlink subsys (disabled) <5>[ 0.157946] audit: type=2000 audit(1773058853.045:1): state=initialized audit_enabled=0 res=1 <6>[ 0.158968] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.158970] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.158976] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.158981] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.158986] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.159024] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.159042] cpuidle: using governor ladder <6>[ 0.159042] cpuidle: using governor menu <6>[ 0.159042] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.159429] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.159458] PCI: Using configuration type 1 for base access <6>[ 0.160017] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.161976] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.161976] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.161976] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.161976] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.166691] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.166699] raid6: using avx2x2 recovery algorithm <6>[ 0.167323] fbcon: Taking over console <6>[ 0.167458] ACPI: Added _OSI(Module Device) <6>[ 0.167463] ACPI: Added _OSI(Processor Device) <6>[ 0.167468] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.711611] ACPI: 31 ACPI AML tables successfully acquired and loaded <6>[ 0.735105] ACPI: EC: EC started <6>[ 0.735130] ACPI: EC: interrupt blocked <6>[ 0.739693] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.739702] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 0.784987] Callback from call_rcu_tasks() invoked. <6>[ 1.027615] ACPI: \_SB_: platform _OSC: OS support mask [006e7eff] <6>[ 1.037577] ACPI: \_SB_: platform _OSC: OS control mask [006e7eff] <6>[ 1.040710] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.040721] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.086175] ACPI: Interpreter enabled <6>[ 1.086364] ACPI: PM: (supports S0 S4 S5) <6>[ 1.086373] ACPI: Using IOAPIC for interrupt routing <6>[ 1.096203] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.096220] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.128763] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.128825] ACPI: Enabled 13 GPEs in block 80 to DF <6>[ 1.197973] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource <6>[ 1.198518] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource <6>[ 1.204019] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.569691] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 1.584114] ACPI: \_SB_.PC00.RP02.PXP_: New power resource <6>[ 1.776579] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource <6>[ 1.781624] ACPI: \_SB_.PC00.RP04.PXP_: New power resource <6>[ 1.811355] ACPI: \_SB_.PC00.RP05.PXP_: New power resource <6>[ 1.840183] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 1.841021] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 1.841849] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.149908] ACPI: \_TZ_.FN00: New power resource <6>[ 2.153344] ACPI: \_TZ_.FN01: New power resource <6>[ 2.160348] ACPI: \_TZ_.FN02: New power resource <6>[ 2.161599] ACPI: \_TZ_.FN03: New power resource <6>[ 2.162284] ACPI: \_TZ_.FN04: New power resource <6>[ 2.164426] ACPI: \PIN_: New power resource <6>[ 2.171166] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.171186] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.175259] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 2.185159] PCI host bridge to bus 0000:00 <6>[ 2.185193] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.185201] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.185208] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.185215] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 2.185223] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window] <6>[ 2.185232] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.188697] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.189381] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.189472] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref] <6>[ 2.189481] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref] <6>[ 2.189490] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref] <6>[ 2.189535] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.190958] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.190987] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit] <6>[ 2.192576] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.192606] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit] <6>[ 2.192613] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit] <6>[ 2.193574] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port <6>[ 2.193617] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.193629] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 2.193648] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 2.193765] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.193835] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.198609] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port <6>[ 2.198652] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.198664] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 2.198682] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 2.198800] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold <6>[ 2.198864] pci 0000:00:07.1: PTM enabled (root), 4ns granularity <6>[ 2.203505] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port <6>[ 2.203548] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.203560] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 2.203578] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 2.203695] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold <6>[ 2.203761] pci 0000:00:07.2: PTM enabled (root), 4ns granularity <6>[ 2.208540] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.208577] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit] <6>[ 2.208591] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.208852] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.208881] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit] <6>[ 2.208888] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit] <6>[ 2.209403] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.209459] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit] <6>[ 2.209533] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.211284] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.211336] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit] <6>[ 2.211344] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit] <6>[ 2.211403] pci 0000:00:0d.2: supports D1 D2 <6>[ 2.211407] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.213011] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.213063] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit] <6>[ 2.213071] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit] <6>[ 2.213130] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.213134] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.214564] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.214622] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit] <6>[ 2.214692] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.218221] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.218310] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit] <6>[ 2.218413] pci 0000:00:13.0: PME# supported from D3hot <6>[ 2.218939] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.218992] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit] <6>[ 2.219061] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.221285] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.221349] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit] <6>[ 2.221358] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit] <6>[ 2.221709] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.221808] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.234163] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.234237] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.245883] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.245959] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.258857] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.259043] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.283793] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.284053] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit] <6>[ 2.284226] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.288302] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port <6>[ 2.288337] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.288346] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 2.288353] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 2.288480] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 2.288555] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity <6>[ 2.293411] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port <6>[ 2.293516] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.293548] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 2.293913] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <6>[ 2.294112] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity <6>[ 2.299445] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.301380] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.301496] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit] <6>[ 2.301510] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit] <6>[ 2.301626] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.302171] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.302239] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit] <6>[ 2.302251] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.303557] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.303740] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.304504] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.304689] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.304870] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.305090] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint <6>[ 2.305162] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff] <6>[ 2.305173] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit] <6>[ 2.305182] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit] <6>[ 2.305363] pci 0000:7f:00.0: supports D1 D2 <6>[ 2.305367] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.306049] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.307992] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.308458] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint <6>[ 2.308516] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit] <6>[ 2.309811] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.309878] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.754303] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 2.754315] Low-power S0 idle used by default for system suspend <6>[ 2.858136] ACPI: EC: interrupt unblocked <6>[ 2.858146] ACPI: EC: event unblocked <6>[ 2.858179] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 2.858185] ACPI: EC: GPE=0x6e <6>[ 2.858192] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 2.858201] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 2.858617] iommu: Default domain type: Translated <6>[ 2.858617] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 2.863120] SCSI subsystem initialized <7>[ 2.863259] libata version 3.00 loaded. <6>[ 2.864082] ACPI: bus type USB registered <6>[ 2.864391] usbcore: registered new interface driver usbfs <6>[ 2.864541] usbcore: registered new interface driver hub <6>[ 2.864681] usbcore: registered new device driver usb <6>[ 2.865125] pps_core: LinuxPPS API ver. 1 registered <6>[ 2.865139] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 2.865205] PTP clock support registered <6>[ 2.866296] EDAC MC: Ver: 3.0.0 <6>[ 2.869969] efivars: Registered efivars operations <6>[ 2.875458] NetLabel: Initializing <6>[ 2.875470] NetLabel: domain hash size = 128 <6>[ 2.875481] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 2.875665] NetLabel: unlabeled traffic allowed by default <6>[ 2.875706] mctp: management component transport protocol core <6>[ 2.875720] NET: Registered PF_MCTP protocol family <6>[ 2.875845] PCI: Using ACPI for IRQ routing <7>[ 2.938146] PCI: pci_cache_line_size set to 64 bytes <6>[ 2.938445] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <6>[ 2.938616] e820: register RAM buffer resource [mem 0x0009f000-0x0009ffff] <6>[ 2.938659] e820: register RAM buffer resource [mem 0x68ff8000-0x6bffffff] <6>[ 2.938684] e820: register RAM buffer resource [mem 0x6992d000-0x6bffffff] <6>[ 2.938707] e820: register RAM buffer resource [mem 0x6cac1000-0x6fffffff] <6>[ 2.938730] e820: register RAM buffer resource [mem 0x87f800000-0x87fffffff] <6>[ 2.940985] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 2.941012] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 2.941026] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 2.941065] vgaarb: loaded <7>[ 2.944940] Monitor-Mwait will be used to enter C-1 state <7>[ 2.945035] Monitor-Mwait will be used to enter C-2 state <7>[ 2.945035] Monitor-Mwait will be used to enter C-3 state <6>[ 2.956912] clocksource: Switched to clocksource tsc-early <5>[ 2.960313] VFS: Disk quotas dquot_6.6.0 <6>[ 2.960380] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 2.964695] AppArmor: AppArmor Filesystem Enabled <6>[ 2.964904] acpi PNP0C02:00: Skipped [io 0x002e-0x002f] <6>[ 2.964922] acpi PNP0C02:00: Skipped [io 0x004e-0x004f] <6>[ 2.964935] acpi PNP0C02:00: Skipped [io 0x0061] <6>[ 2.964946] acpi PNP0C02:00: Skipped [io 0x0063] <6>[ 2.964958] acpi PNP0C02:00: Skipped [io 0x0065] <6>[ 2.964969] acpi PNP0C02:00: Skipped [io 0x0067] <6>[ 2.964980] acpi PNP0C02:00: Skipped [io 0x0070] <6>[ 2.964992] acpi PNP0C02:00: Skipped [io 0x0080] <6>[ 2.965003] acpi PNP0C02:00: Skipped [io 0x0092] <6>[ 2.965015] acpi PNP0C02:00: Skipped [io 0x00b2-0x00b3] <6>[ 2.965043] acpi PNP0C02:00: Reserved [io 0x0680-0x069f] <6>[ 2.965062] acpi PNP0C02:00: Reserved [io 0x164e-0x164f] <6>[ 2.965165] acpi PNP0C02:01: Reserved [io 0x06a4] <6>[ 2.965182] acpi PNP0C02:01: Reserved [io 0x06a0] <6>[ 2.967918] acpi PNP0C02:04: Reserved [mem 0xfedc0000-0xfedc7fff] <6>[ 2.967941] acpi PNP0C02:04: Reserved [mem 0xd8000000-0xd8000fff] <6>[ 2.967965] acpi PNP0C02:04: Could not reserve [mem 0x00000000-0x00000fff] <6>[ 2.967986] acpi PNP0C02:04: Reserved [mem 0xc0000000-0xcfffffff] <6>[ 2.968005] acpi PNP0C02:04: Reserved [mem 0xfed20000-0xfed7ffff] <6>[ 2.968039] acpi PNP0C02:04: Could not reserve [mem 0xfc800000-0xfc81ffff] <6>[ 2.968061] acpi PNP0C02:04: Could not reserve [mem 0xfed45000-0xfed8ffff] <6>[ 2.968082] acpi PNP0C02:04: Reserved [mem 0xfee00000-0xfeefffff] <6>[ 2.971272] acpi PNP0C02:05: Reserved [mem 0xfe000000-0xfe01ffff] <6>[ 2.971291] acpi PNP0C02:05: Reserved [mem 0xfe04c000-0xfe04ffff] <6>[ 2.971310] acpi PNP0C02:05: Reserved [mem 0xfe050000-0xfe0affff] <6>[ 2.971327] acpi PNP0C02:05: Reserved [mem 0xfe0d0000-0xfe0fffff] <6>[ 2.971345] acpi PNP0C02:05: Reserved [mem 0xfe200000-0xfe7fffff] <6>[ 2.971364] acpi PNP0C02:05: Reserved [mem 0xff000000-0xffffffff] <6>[ 2.971387] acpi PNP0C02:05: Reserved [mem 0xdf000000-0xdfffffff] <6>[ 2.971409] acpi PNP0C02:05: Could not reserve [io 0x1800-0x18fe] <6>[ 2.971431] acpi PNP0C02:05: Could not reserve [mem 0xe0000000-0xe074ffff] <6>[ 2.971452] acpi PNP0C02:05: Could not reserve [mem 0xe0730000-0xe074ffff] <6>[ 2.971473] acpi PNP0C02:05: Could not reserve [mem 0xe0710000-0xefffffff] <6>[ 2.974016] acpi PNP0C02:06: Reserved [io 0x2000-0x20fe] <6>[ 2.978982] acpi PNP0C01:00: Could not reserve [mem 0x00000000-0x0009cfff] <6>[ 2.979514] pnp: PnP ACPI init <6>[ 3.033190] pnp: PnP ACPI: found 1 devices <6>[ 3.053517] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 3.053909] NET: Registered PF_INET protocol family <6>[ 3.054237] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.057492] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 3.057817] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 3.058132] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.059504] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 3.061582] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 3.062275] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.063890] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.065562] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 3.065666] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000 <6>[ 3.065685] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000 <6>[ 3.065700] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000 <6>[ 3.065776] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 3.065787] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned <6>[ 3.065796] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned <6>[ 3.065807] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned <6>[ 3.065837] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned <6>[ 3.065863] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned <6>[ 3.065889] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned <6>[ 3.065914] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned <6>[ 3.065961] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 3.065976] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 3.065988] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 3.065999] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 3.066015] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 3.066049] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff] <6>[ 3.066061] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 3.066073] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 3.066088] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 3.066097] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff] <6>[ 3.066109] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 3.066120] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 3.066137] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 3.066145] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 3.066156] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 3.066170] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 3.066207] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 3.066251] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 3.066260] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 3.066268] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 3.066277] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 3.066286] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window] <6>[ 3.066296] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] <6>[ 3.066303] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff] <6>[ 3.066311] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 3.066322] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff] <6>[ 3.066329] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 3.066337] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 3.066347] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff] <6>[ 3.066355] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 3.066363] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 3.066373] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff] <6>[ 3.066380] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff] <6>[ 3.066389] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff] <6>[ 3.067847] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 3.070158] PCI: CLS 0 bytes, default 64 <6>[ 3.070310] DMAR: No RMRR found <6>[ 3.070326] DMAR: No ATSR found <6>[ 3.070332] DMAR: dmar1: Using Queued invalidation <6>[ 3.070342] DMAR: dmar0: Using Queued invalidation <6>[ 3.070350] DMAR: dmar2: Using Queued invalidation <6>[ 3.071660] pci 0000:00:04.0: Adding to iommu group 0 <6>[ 3.071783] pci 0000:00:05.0: Adding to iommu group 1 <6>[ 3.071906] pci 0000:00:0a.0: Adding to iommu group 2 <6>[ 3.072008] pci 0000:00:0b.0: Adding to iommu group 3 <6>[ 3.076981] pci 0000:00:02.0: Adding to iommu group 4 <6>[ 3.081969] pci 0000:00:00.0: Adding to iommu group 5 <6>[ 3.082049] pci 0000:00:07.0: Adding to iommu group 6 <6>[ 3.082116] pci 0000:00:07.1: Adding to iommu group 7 <6>[ 3.082176] pci 0000:00:07.2: Adding to iommu group 8 <6>[ 3.082256] pci 0000:00:0d.0: Adding to iommu group 9 <6>[ 3.082298] pci 0000:00:0d.2: Adding to iommu group 9 <6>[ 3.082340] pci 0000:00:0d.3: Adding to iommu group 9 <6>[ 3.082406] pci 0000:00:12.0: Adding to iommu group 10 <6>[ 3.082474] pci 0000:00:13.0: Adding to iommu group 11 <6>[ 3.082547] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 3.082589] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 3.082674] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 3.082715] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 3.082756] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 3.082798] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 3.082860] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 3.082921] pci 0000:00:1c.0: Adding to iommu group 15 <6>[ 3.083036] pci 0000:00:1c.4: Adding to iommu group 16 <6>[ 3.083151] pci 0000:00:1f.0: Adding to iommu group 17 <6>[ 3.083213] pci 0000:00:1f.3: Adding to iommu group 17 <6>[ 3.083262] pci 0000:00:1f.4: Adding to iommu group 17 <6>[ 3.083311] pci 0000:00:1f.5: Adding to iommu group 17 <6>[ 3.083372] pci 0000:7f:00.0: Adding to iommu group 18 <6>[ 3.083459] pci 0000:80:00.0: Adding to iommu group 19 <6>[ 3.092991] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 3.093228] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 3.093284] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB) <6>[ 3.099887] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 3.099966] clocksource: Switched to clocksource tsc <6>[ 3.100125] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 3.106762] Initialise system trusted keyrings <5>[ 3.106833] Key type blacklist registered <6>[ 3.107470] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 3.114931] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 3.115016] ntfs3: Enabled Linux POSIX ACLs support <6>[ 3.115028] ntfs3: Read-only LZX/Xpress compression included <5>[ 3.115422] integrity: Platform Keyring initialized <5>[ 3.115442] integrity: Machine keyring initialized <6>[ 3.119710] xor: automatically using best checksumming function avx <5>[ 3.119718] Key type asymmetric registered <5>[ 3.119726] Asymmetric key parser 'x509' registered <6>[ 3.119812] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 3.120448] io scheduler mq-deadline registered <6>[ 3.121387] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.122613] pcieport 0000:00:07.0: PME: Signaling with IRQ 126 <6>[ 3.122958] pcieport 0000:00:07.0: AER: enabled with IRQ 126 <6>[ 3.123915] pcieport 0000:00:07.1: PME: Signaling with IRQ 127 <6>[ 3.124244] pcieport 0000:00:07.1: AER: enabled with IRQ 127 <6>[ 3.125242] pcieport 0000:00:07.2: PME: Signaling with IRQ 128 <6>[ 3.125549] pcieport 0000:00:07.2: AER: enabled with IRQ 128 <6>[ 3.126432] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129 <6>[ 3.126937] pcieport 0000:00:1c.0: AER: enabled with IRQ 129 <6>[ 3.128118] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130 <6>[ 3.128479] pcieport 0000:00:1c.4: AER: enabled with IRQ 130 <6>[ 3.129812] input: Lid Switch as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 3.129960] ACPI: button: Lid Switch [LID0] <6>[ 3.130143] input: Sleep Button as /devices/platform/PNP0C0E:00/input/input1 <6>[ 3.130286] ACPI: button: Sleep Button [SLPB] <6>[ 3.130581] input: Power Button as /devices/platform/PNP0C0C:00/input/input2 <6>[ 3.130663] ACPI: button: Power Button [PWRB] <6>[ 3.282154] acpi LNXTHERM:00: registered as thermal_zone0 <6>[ 3.282180] ACPI: thermal: Thermal Zone [TZ00] (46 C) <6>[ 3.285295] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 3.288964] ACPI: battery: Slot [BAT0] (battery present) <6>[ 3.292129] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 3.317274] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 3.369280] serial 0000:00:12.0: enabling device (0000 -> 0002) <5>[ 3.375514] hpet_acpi_add: no address or irqs in _CRS <6>[ 3.375843] Linux agpgart interface v0.103 <6>[ 3.377306] ACPI: bus type drm_connector registered <7>[ 3.379332] initcall simpledrm_platform_driver_init blacklisted <6>[ 3.417118] loop: module loaded <6>[ 3.492328] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 3.629326] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 3.750837] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 3.872558] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <5>[ 4.070503] Key type psk registered <6>[ 4.077744] nvme 0000:80:00.0: platform quirk: setting simple suspend <6>[ 4.079488] nvme nvme0: pci function 0000:80:00.0 <6>[ 4.127569] nvme nvme0: 8/0/0 default/read/poll queues <6>[ 4.141330] nvme0n1: p1 p2 <6>[ 4.148070] tun: Universal TUN/TAP device driver, 1.6 <6>[ 4.150423] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.150632] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 4.153304] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.157218] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.157261] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 4.157300] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.157996] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00 <6>[ 4.158042] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.158061] usb usb1: Product: xHCI Host Controller <6>[ 4.158073] usb usb1: Manufacturer: Linux 7.0.0-rc2-lgci-xe-xe-4680-2590b5b38b7b67f86-debug+ xhci-hcd <6>[ 4.158094] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 4.160945] hub 1-0:1.0: USB hub found <6>[ 4.161138] hub 1-0:1.0: 1 port detected <6>[ 4.168648] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00 <6>[ 4.168675] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.168695] usb usb2: Product: xHCI Host Controller <6>[ 4.168708] usb usb2: Manufacturer: Linux 7.0.0-rc2-lgci-xe-xe-4680-2590b5b38b7b67f86-debug+ xhci-hcd <6>[ 4.168730] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 4.171225] hub 2-0:1.0: USB hub found <6>[ 4.171321] hub 2-0:1.0: 3 ports detected <6>[ 4.226278] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.226344] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 4.228935] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.232300] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.232335] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 4.232365] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.232756] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00 <6>[ 4.232778] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.232795] usb usb3: Product: xHCI Host Controller <6>[ 4.232808] usb usb3: Manufacturer: Linux 7.0.0-rc2-lgci-xe-xe-4680-2590b5b38b7b67f86-debug+ xhci-hcd <6>[ 4.232828] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 4.236595] hub 3-0:1.0: USB hub found <6>[ 4.236912] hub 3-0:1.0: 8 ports detected <6>[ 4.290258] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00 <6>[ 4.290281] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.290295] usb usb4: Product: xHCI Host Controller <6>[ 4.290304] usb usb4: Manufacturer: Linux 7.0.0-rc2-lgci-xe-xe-4680-2590b5b38b7b67f86-debug+ xhci-hcd <6>[ 4.290320] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 4.292017] hub 4-0:1.0: USB hub found <6>[ 4.292089] hub 4-0:1.0: 2 ports detected <6>[ 4.299863] usbcore: registered new interface driver usb-storage <6>[ 4.299989] usbcore: registered new interface driver usbserial_generic <6>[ 4.300060] usbserial: USB Serial support registered for generic <6>[ 4.300112] usbcore: registered new interface driver ftdi_sio <6>[ 4.300139] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 4.300188] usbcore: registered new interface driver pl2303 <6>[ 4.300216] usbserial: USB Serial support registered for pl2303 <6>[ 4.300299] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 4.300305] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 5.013242] i8042: Can't read CTR while initializing i8042 <3>[ 5.013350] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 5.014335] mousedev: PS/2 mouse device common for all mice <6>[ 5.015618] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 5.017845] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 5.018078] rtc_cmos rtc_cmos: setting system clock to 2026-03-09T12:20:58 UTC (1773058858) <6>[ 5.018299] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 5.018369] i2c_dev: i2c /dev entries driver <6>[ 5.024016] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 5.024036] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 5.024049] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 5.024094] device-mapper: uevent: version 1.0.3 <6>[ 5.024537] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 5.024558] intel_pstate: Intel P-state driver initializing <6>[ 5.028544] Hybrid CPU capacity scaling enabled <6>[ 5.028940] processor cpu0: EM: created perf domain <6>[ 5.029264] processor cpu1: EM: created perf domain <6>[ 5.029589] processor cpu2: EM: created perf domain <6>[ 5.029880] processor cpu3: EM: created perf domain <6>[ 5.030166] processor cpu4: EM: created perf domain <6>[ 5.030436] processor cpu5: EM: created perf domain <6>[ 5.030713] processor cpu6: EM: created perf domain <6>[ 5.030986] processor cpu7: EM: created perf domain <6>[ 5.032203] intel_pstate: HWP enabled <6>[ 5.032216] sdhci: Secure Digital Host Controller Interface driver <6>[ 5.032222] sdhci: Copyright(c) Pierre Ossman <6>[ 5.032407] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 5.035400] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c] <6>[ 5.036355] drop_monitor: Initializing network drop monitor service <6>[ 5.036568] NET: Registered PF_INET6 protocol family <6>[ 5.037933] Segment Routing with IPv6 <6>[ 5.037977] In-situ OAM (IOAM) with IPv6 <6>[ 5.038464] NET: Registered PF_PACKET protocol family <5>[ 5.038669] Key type dns_resolver registered <4>[ 5.043299] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 5.043852] microcode: Current revision: 0x00000124 <6>[ 5.044553] IPI shorthand broadcast: enabled <6>[ 5.059177] sched_clock: Marking stable (5049001629, 10019822)->(5120304112, -61282661) <6>[ 5.060186] registered taskstats version 1 <5>[ 5.062234] Loading compiled-in X.509 certificates <6>[ 5.112346] Demotion targets for Node 0: null <6>[ 5.112579] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946) <6>[ 5.112628] kmemleak: Automatic memory scanning thread started <5>[ 5.112823] Key type .fscrypt registered <5>[ 5.112828] Key type fscrypt-provisioning registered <6>[ 5.115987] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 5.118289] Key type encrypted registered <6>[ 5.118295] AppArmor: AppArmor sha256 policy hashing enabled <6>[ 5.118310] ima: No TPM chip found, activating TPM-bypass! <5>[ 5.118322] Loading compiled-in module X.509 certificates <5>[ 5.119060] Loaded X.509 cert 'Build time autogenerated kernel key: b2d4acf42af45299c71ffb4bb53324632bb02e3e' <6>[ 5.119070] ima: Allocated hash algorithm: sha256 <6>[ 5.119112] ima: No architecture policies found <6>[ 5.119204] evm: Initialising EVM extended attributes: <6>[ 5.119208] evm: security.selinux <6>[ 5.119211] evm: security.SMACK64 <6>[ 5.119214] evm: security.SMACK64EXEC <6>[ 5.119217] evm: security.SMACK64TRANSMUTE <6>[ 5.119220] evm: security.SMACK64MMAP <6>[ 5.119223] evm: security.apparmor <6>[ 5.119226] evm: security.ima <6>[ 5.119229] evm: security.capability <6>[ 5.119232] evm: HMAC attrs: 0x1 <6>[ 5.121361] PM: Magic number: 2:201:329 <6>[ 5.121404] tty tty50: hash matches <6>[ 5.121461] acpi STK0006:03: hash matches <6>[ 5.121468] acpi MCHP1940:03: hash matches <6>[ 5.121617] netconsole: network logging started <6>[ 5.122294] RAS: Correctable Errors collector initialized. <6>[ 5.122896] clk: Disabling unused clocks <6>[ 5.122911] PM: genpd: Disabling unused power domains <6>[ 5.123461] md: Waiting for all devices to be available before autodetect <6>[ 5.123467] md: If you don't use raid, use raid=noautodetect <6>[ 5.123471] md: Autodetecting RAID arrays. <6>[ 5.123479] md: autorun ... <6>[ 5.123482] md: ... autorun DONE. <6>[ 5.167215] EXT4-fs (nvme0n1p2): mounted filesystem ab02bed0-b378-4950-9087-63334df65791 ro with ordered data mode. Quota mode: none. <6>[ 5.167285] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 5.167894] devtmpfs: mounted <6>[ 5.168251] VFS: Pivoted into new rootfs <6>[ 5.185958] Freeing unused decrypted memory: 2036K <6>[ 5.186813] Freeing unused kernel image (initmem) memory: 5764K <6>[ 5.186837] Write protecting the kernel read-only data: 36864k <6>[ 5.187468] Freeing unused kernel image (text/rodata gap) memory: 704K <6>[ 5.187712] Freeing unused kernel image (rodata/data gap) memory: 520K <6>[ 5.192351] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 5.199336] Run /sbin/init as init process <7>[ 5.199343] with arguments: <7>[ 5.199344] /sbin/init <7>[ 5.199345] with environment: <7>[ 5.199345] HOME=/ <7>[ 5.199346] TERM=linux <7>[ 5.256105] systemd[1]: Inserted module 'autofs4' <7>[ 5.286074] systemd[1]: systemd 255.4-1ubuntu8.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 5.286127] systemd[1]: Detected architecture x86-64. <7>[ 5.287531] systemd[1]: Hostname set to . <7>[ 5.526093] systemd[1]: Queued start job for default target graphical.target. <7>[ 5.546655] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 5.548542] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 5.550223] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 5.550491] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 5.551165] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 5.551306] systemd[1]: Expecting device dev-disk-by\x2duuid-BBB3\x2d0D61.device - /dev/disk/by-uuid/BBB3-0D61... <7>[ 5.551399] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 5.551477] systemd[1]: Reached target slices.target - Slice Units. <7>[ 5.551547] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 5.551612] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 5.551681] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 5.551917] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 5.552322] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 5.552598] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 5.552908] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 5.553183] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 5.553382] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 5.553662] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 5.553979] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 5.554270] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 5.554445] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.554722] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 5.554976] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 5.558544] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 5.561434] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 5.564369] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 5.567168] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 5.574237] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 5.577903] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 5.581250] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 5.585396] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 5.588018] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 5.591003] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 5.594262] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 5.600467] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 5.603789] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 5.606298] systemd-journald[204]: Collecting audit messages is disabled. <7>[ 5.607819] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 5.612883] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 5.613298] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <6>[ 5.616631] pstore: Using crash dump compression: deflate <7>[ 5.618785] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <6>[ 5.624081] pstore: Registered efi_pstore as persistent store backend <7>[ 5.626110] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 5.626257] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.626350] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <6>[ 5.630710] fuse: init (API version 7.45) <7>[ 5.631157] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <7>[ 5.636595] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 5.792613] EXT4-fs (nvme0n1p2): re-mounted ab02bed0-b378-4950-9087-63334df65791 r/w. <6>[ 5.818945] Adding 8388604k swap on /swap.img. Priority:-1 extents:65 across:341704704k SS <7>[ 5.831888] systemd-journald[204]: Received client request to flush runtime journal. <7>[ 5.848899] systemd-journald[204]: /var/log/journal/b767726c6704475694a1e926e667900b/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 5.848918] systemd-journald[204]: Rotating system journal. <4>[ 6.511366] nvme nvme0: using unchecked data buffer <6>[ 6.670744] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 6.679431] ACPI: bus type thunderbolt registered <6>[ 6.683206] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v1.bin, version: Nov 13 2025*NPU40xx*ci_tag_ud202548_vpu_rc_20251112_1901-1-g72f907ffc78*72f907ffc780df5579a2fed65afc4944da8b0e44 <6>[ 6.683215] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: HW <6>[ 6.686506] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 6.758053] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <5>[ 6.806527] audit: type=1400 audit(1773058860.286:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=406 comm="apparmor_parser" <5>[ 6.806972] audit: type=1400 audit(1773058860.286:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=408 comm="apparmor_parser" <5>[ 6.807534] audit: type=1400 audit(1773058860.287:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=405 comm="apparmor_parser" <5>[ 6.807973] audit: type=1400 audit(1773058860.287:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=407 comm="apparmor_parser" <5>[ 6.808373] audit: type=1400 audit(1773058860.288:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=409 comm="apparmor_parser" <5>[ 6.808577] audit: type=1400 audit(1773058860.288:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=404 comm="apparmor_parser" <5>[ 6.811602] audit: type=1400 audit(1773058860.291:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=410 comm="apparmor_parser" <5>[ 6.814907] audit: type=1400 audit(1773058860.294:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=411 comm="apparmor_parser" <5>[ 6.816681] audit: type=1400 audit(1773058860.296:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=412 comm="apparmor_parser" <5>[ 6.818110] audit: type=1400 audit(1773058860.298:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=413 comm="apparmor_parser" <6>[ 6.826683] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402) <6>[ 6.827276] intel_rapl_common: Found RAPL domain package <6>[ 6.827280] intel_rapl_common: Found RAPL domain dram <6>[ 6.951030] input: Intel HID events as /devices/platform/INTC107B:00/input/input3 <6>[ 6.955466] intel-hid INTC107B:00: platform supports 5 button array <6>[ 6.984812] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0 <6>[ 7.013734] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4 <3>[ 7.350864] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121 <3>[ 7.351071] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121 <6>[ 7.504350] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 7.521943] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 7.558580] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 7.606104] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 7.745970] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 7.745975] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 7.745977] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 7.745978] RAPL PMU: hw unit of domain dram 2^-14 Joules <6>[ 7.745978] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 7.816500] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin <6>[ 7.817476] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <4>[ 7.829941] block nvme0n1: No UUID available providing old NGUID <6>[ 7.843348] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888 <6>[ 7.843358] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716 <6>[ 7.843361] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472 <6>[ 7.936587] r8169 0000:7f:00.0: enabling device (0000 -> 0003) <6>[ 7.937446] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 7.939483] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.957779] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.973052] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.978509] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.985824] pci 0000:00:05.0: Setting to D3hot <6>[ 7.987044] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c9:30:ac, XID 541, IRQ 195 <6>[ 7.987052] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] <6>[ 7.990393] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.997356] intel_pmc_core INT33A1:00: initialized <6>[ 8.006648] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.154615] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.582474] intel_rapl_common: Found RAPL domain package <6>[ 8.582800] intel_rapl_common: Found RAPL domain core <6>[ 8.582803] intel_rapl_common: Found RAPL domain dram <6>[ 8.582805] intel_rapl_common: Found RAPL domain psys <6>[ 8.719269] loop0: detected capacity change from 0 to 8 <6>[ 8.727354] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.738913] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.885720] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.942295] r8169 0000:7f:00.0 enp127s0: renamed from eth0 <6>[ 8.986758] hid: raw HID events driver (C) Jiri Kosina <6>[ 8.991105] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 9.003679] spi-nor spi0.0: supply vcc not found, using dummy regulator <6>[ 9.008873] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <5>[ 9.016756] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 9.016783] 0x000000000000-0x000002000000 : "BIOS" <6>[ 9.029770] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.051060] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC) <6>[ 9.069486] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.085342] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.086810] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.088496] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.090259] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.091679] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.094263] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.095471] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.097727] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 9.101146] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.102552] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 9.107165] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.113208] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.121076] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.122776] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.128470] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.132906] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.138510] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.139798] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.143609] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.146488] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 9.150540] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 9.151081] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.153954] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.210316] r8169 0000:7f:00.0 enp127s0: Link is Down <6>[ 9.309728] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.317877] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.323556] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.329636] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.335500] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.339498] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.347015] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.352652] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.361499] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.361853] Consider using thermal netlink events interface <6>[ 9.365377] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.369426] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.374795] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.379384] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.383454] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.387484] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.392379] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.397886] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.403151] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.412205] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.420210] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 10.230868] typec port0: bound usb3-port1 (ops connector_ops) <6>[ 10.230918] typec port0: bound usb2-port1 (ops connector_ops) <6>[ 10.230961] typec port0: bound usb4_port1 (ops connector_ops [thunderbolt]) <6>[ 11.288527] typec port1: bound usb3-port2 (ops connector_ops) <6>[ 11.288651] typec port1: bound usb2-port2 (ops connector_ops) <6>[ 11.288701] typec port1: bound usb4_port3 (ops connector_ops [thunderbolt]) <6>[ 12.783759] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off <6>[ 19.541998] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 19.545872] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 34.164295] systemd-journald[204]: /var/log/journal/b767726c6704475694a1e926e667900b/user-1000.journal: Journal file uses a different sequence number ID, rotating. <6>[ 35.867563] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <7>[ 54.068168] [IGT] xe_module_load: executing <4>[ 54.068222] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 54.076574] [IGT] xe_module_load: starting subtest load <5>[ 54.384462] Setting dangerous option force_probe - tainting kernel <6>[ 54.388020] xe 0000:00:02.0: vgaarb: deactivate vga console <7>[ 54.389424] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error <6>[ 54.389879] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7>[ 54.389889] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7>[ 54.390016] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7>[ 54.390135] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7>[ 54.392564] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7>[ 54.392722] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7>[ 54.392832] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 54.392955] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7>[ 54.393073] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7>[ 54.393174] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7>[ 54.393284] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7>[ 54.393389] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7>[ 54.393481] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7>[ 54.393587] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 54.393685] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7>[ 54.393800] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7>[ 54.393908] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7>[ 54.394011] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7>[ 54.394116] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7>[ 54.394258] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7>[ 54.394400] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7>[ 54.394524] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7>[ 54.394633] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7>[ 54.394740] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7>[ 54.394846] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 54.394951] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 54.395055] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7>[ 54.395159] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 54.395281] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 54.395394] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 54.395515] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7>[ 54.395627] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 54.395737] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 54.395845] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 54.395945] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7>[ 54.396045] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 54.396146] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 54.396267] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 54.396397] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7>[ 54.396518] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 54.396617] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 54.396715] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 54.396814] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7>[ 54.396912] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 54.397011] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 54.397108] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 54.397229] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7>[ 54.397745] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7>[ 54.397888] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7>[ 54.398022] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7>[ 54.398145] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7>[ 54.398309] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7>[ 54.398461] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7>[ 54.398588] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 850) <7>[ 54.398726] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7>[ 54.398852] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7>[ 54.398972] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7>[ 54.399094] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7>[ 54.399242] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7>[ 54.399388] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7>[ 54.399514] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7>[ 54.399624] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7>[ 54.399737] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 54.399842] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7>[ 54.399947] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7>[ 54.400057] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 54.400187] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 54.400326] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 54.400460] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7>[ 54.400565] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 54.400669] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 54.400775] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 54.400883] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 54.400990] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7>[ 54.401118] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 54.401314] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7>[ 54.401487] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 54.401817] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7>[ 54.402010] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7>[ 54.402178] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7>[ 54.402335] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 54.402455] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 54.402598] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7>[ 54.402711] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7>[ 54.402842] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 54.402944] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7>[ 54.403064] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 54.403186] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7>[ 54.403331] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 54.403441] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7>[ 54.403661] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 54.403770] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7>[ 54.404261] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7>[ 54.404732] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7>[ 54.404870] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7>[ 54.404976] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7>[ 54.405535] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7>[ 54.405630] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7>[ 54.405719] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7>[ 54.405805] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7>[ 54.405889] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7>[ 54.405970] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7>[ 54.406089] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7>[ 54.406206] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7>[ 54.406307] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7>[ 54.406384] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7>[ 54.406460] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7>[ 54.407707] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7>[ 54.407842] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 54.408005] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 54.408157] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7>[ 54.408307] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7>[ 54.408453] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7>[ 54.408606] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7>[ 54.408754] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7>[ 54.408900] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 54.409057] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7>[ 54.409193] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 54.409326] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7>[ 54.409454] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 54.409582] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7>[ 54.409712] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7>[ 54.409837] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7>[ 54.409965] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 54.410088] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7>[ 54.410208] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 54.410329] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7>[ 54.410449] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 54.410565] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7>[ 54.410687] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7>[ 54.410806] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7>[ 54.410935] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 54.411050] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7>[ 54.411167] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 54.411281] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7>[ 54.411397] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 54.411512] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7>[ 54.411725] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available. <7>[ 54.418145] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 54.418339] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7>[ 54.418487] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7>[ 54.418682] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:391:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 54.418906] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:391:DDI A/PHY A] <7>[ 54.419144] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7>[ 54.419292] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7>[ 54.419421] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7>[ 54.419554] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 54.419678] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7>[ 54.419806] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 54.419928] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7>[ 54.420042] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7>[ 54.420155] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 54.420315] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:391:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 54.420560] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 54.420679] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 54.420788] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 54.420890] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 54.420983] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 54.421225] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 54.421536] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 54.423062] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turning VDD on <7>[ 54.423263] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <6>[ 54.423530] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7>[ 54.458095] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 54.469882] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7>[ 54.493444] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7>[ 54.517011] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7>[ 54.528797] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7>[ 54.587746] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 54.929556] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 54.929567] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.929568] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.929570] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 54.929572] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 54.929574] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.929576] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] ELD monitor <5>[ 54.929580] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.929581] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] ELD size 20, SAD count 0 <5>[ 54.929583] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.929619] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.929621] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.929622] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.929635] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:392:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.929770] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:392:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.941312] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:392:eDP-1] Performing OUI wait (0 ms) <7>[ 54.953099] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:392:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 54.953237] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:392:eDP-1] AUX Backlight Control Supported! <7>[ 54.953362] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:392:eDP-1] Using VESA eDP backlight controls <7>[ 54.953477] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:392:eDP-1] DRRS type: seamless <7>[ 54.964883] xe 0000:00:02.0: [drm:drm_edp_backlight_init [drm_display_helper]] AUX A/DDI A/PHY A: Found backlight: aux_set=0 aux_enable=0 mode=2 <7>[ 54.964903] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:392:eDP-1] AUX VESA backlight enable is controlled through PWM <7>[ 54.965032] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:392:eDP-1] AUX VESA backlight level is controlled through PWM using PWM values <7>[ 54.965152] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:392:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 54.965268] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:392:eDP-1] Using AUX VESA interface for backlight control <7>[ 54.965378] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:392:eDP-1] backlight initialized, disabled, brightness 192000/192000 <7>[ 54.965541] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 54.965656] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 54.965753] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 54.965852] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 54.965945] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 54.966077] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 54.966299] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:400:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 54.966493] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 54.966626] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:400:DDI TC1/PHY TC1] <7>[ 54.967027] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:412:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 54.967168] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 54.967288] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:412:DDI TC2/PHY TC2] <7>[ 54.967533] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:420:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 54.967667] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 54.967803] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:420:DDI TC3/PHY TC3] <7>[ 54.968223] xe 0000:00:02.0: [drm:intel_vga_disable [xe]] VGA plane is disabled <6>[ 54.968352] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io:owns=io+mem <7>[ 54.968771] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:150:pipe A] hw state readout: enabled <7>[ 54.968927] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:269:pipe B] hw state readout: disabled <7>[ 54.969057] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:388:pipe C] hw state readout: disabled <7>[ 54.969163] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:34:plane 1A] hw state readout: enabled, pipe A <7>[ 54.969258] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:64:plane 2A] hw state readout: disabled, pipe A <7>[ 54.969352] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 3A] hw state readout: disabled, pipe A <7>[ 54.969444] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:124:plane 4A] hw state readout: disabled, pipe A <7>[ 54.969536] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:134:plane 5A] hw state readout: disabled, pipe A <7>[ 54.969626] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:144:cursor A] hw state readout: disabled, pipe A <7>[ 54.969716] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:153:plane 1B] hw state readout: disabled, pipe B <7>[ 54.969816] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:plane 2B] hw state readout: disabled, pipe B <7>[ 54.969921] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:213:plane 3B] hw state readout: disabled, pipe B <7>[ 54.970017] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:243:plane 4B] hw state readout: disabled, pipe B <7>[ 54.970112] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:253:plane 5B] hw state readout: disabled, pipe B <7>[ 54.970200] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:263:cursor B] hw state readout: disabled, pipe B <7>[ 54.970288] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:272:plane 1C] hw state readout: disabled, pipe C <7>[ 54.970380] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:302:plane 2C] hw state readout: disabled, pipe C <7>[ 54.970475] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:332:plane 3C] hw state readout: disabled, pipe C <7>[ 54.970563] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:362:plane 4C] hw state readout: disabled, pipe C <7>[ 54.970650] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:372:plane 5C] hw state readout: disabled, pipe C <7>[ 54.970736] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:382:cursor C] hw state readout: disabled, pipe C <7>[ 54.971837] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 54.971989] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:391:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 54.972097] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 54.972185] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:400:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 54.972266] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST A] hw state readout: disabled, pipe A <7>[ 54.972345] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST B] hw state readout: disabled, pipe B <7>[ 54.972424] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:404:DP-MST C] hw state readout: disabled, pipe C <7>[ 54.972506] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 54.972588] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:412:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 54.972672] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST A] hw state readout: disabled, pipe A <7>[ 54.972770] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST B] hw state readout: disabled, pipe B <7>[ 54.972877] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:416:DP-MST C] hw state readout: disabled, pipe C <7>[ 54.972986] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 54.973088] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:420:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 54.973169] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST A] hw state readout: disabled, pipe A <7>[ 54.973249] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST B] hw state readout: disabled, pipe B <7>[ 54.973327] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:424:DP-MST C] hw state readout: disabled, pipe C <7>[ 54.974335] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving DPLL 0 <7>[ 54.974435] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 54.974535] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 54.974632] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 54.974760] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 54.974896] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 54.975020] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 54.975115] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 54.975234] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:392:eDP-1] hw state readout: enabled <7>[ 54.975338] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:401:DP-1] hw state readout: disabled <7>[ 54.975440] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:413:DP-2] hw state readout: disabled <7>[ 54.975533] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:421:DP-3] hw state readout: disabled <7>[ 54.975723] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:34:plane 1A] min_cdclk 173855 kHz <7>[ 54.975835] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:64:plane 2A] min_cdclk 0 kHz <7>[ 54.975942] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 3A] min_cdclk 0 kHz <7>[ 54.976031] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:124:plane 4A] min_cdclk 0 kHz <7>[ 54.976114] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:134:plane 5A] min_cdclk 0 kHz <7>[ 54.976197] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:144:cursor A] min_cdclk 0 kHz <7>[ 54.976280] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:150:pipe A] min_cdclk 173855 kHz <7>[ 54.976362] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:153:plane 1B] min_cdclk 0 kHz <7>[ 54.976442] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:plane 2B] min_cdclk 0 kHz <7>[ 54.976522] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:213:plane 3B] min_cdclk 0 kHz <7>[ 54.976603] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:243:plane 4B] min_cdclk 0 kHz <7>[ 54.976703] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:253:plane 5B] min_cdclk 0 kHz <7>[ 54.976813] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:263:cursor B] min_cdclk 0 kHz <7>[ 54.976922] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:269:pipe B] min_cdclk 0 kHz <7>[ 54.977018] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:272:plane 1C] min_cdclk 0 kHz <7>[ 54.977097] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:302:plane 2C] min_cdclk 0 kHz <7>[ 54.977176] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:332:plane 3C] min_cdclk 0 kHz <7>[ 54.977252] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:362:plane 4C] min_cdclk 0 kHz <7>[ 54.977328] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:372:plane 5C] min_cdclk 0 kHz <7>[ 54.977404] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:382:cursor C] min_cdclk 0 kHz <7>[ 54.977479] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:388:pipe C] min_cdclk 0 kHz <7>[ 54.977708] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:150:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 54.977814] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:269:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 54.977917] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:388:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 54.978012] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1 <7>[ 54.978134] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7>[ 54.978249] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7>[ 54.978389] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 54.978500] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A <7>[ 54.978778] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [setup_hw_state] <7>[ 54.978932] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 54.979040] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 54.979145] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 54.979249] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 54.979351] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 54.979452] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 54.979552] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64 <7>[ 54.979678] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 54.979808] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 54.979928] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 54.980029] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 54.980123] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 54.980218] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 54.980314] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 54.980411] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 54.980505] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96 <7>[ 54.980608] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 54.980735] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 54.980866] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.980979] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.981085] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 54.981191] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.981289] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 54.981385] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 54.981477] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 54.981575] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 54.981696] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 54.981813] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 54.981912] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 54.982000] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes, <7>[ 54.982087] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 40960, rem: 0, den: 1, <7>[ 54.982175] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 54.982262] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 54.982347] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 54.982434] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 54.982521] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 54.982637] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 54.982759] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 54.982877] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 54.982975] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 54.983066] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 54.983159] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 54.983252] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.983341] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.983429] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.983525] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 54.983634] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 54.983745] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.983850] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.983933] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.984016] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 54.984101] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 54.984185] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: no [setup_hw_state] <7>[ 54.984268] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:388:pipe C] enable: no [setup_hw_state] <7>[ 54.984350] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <7>[ 54.984649] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:150:pipe A][PLANE:34:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <6>[ 54.984788] xe 0000:00:02.0: [drm] Initial FB size exceeds half of stolen, discarding <7>[ 54.984789] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:34:plane 1A] on [CRTC:150:pipe A] <6>[ 54.998729] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.58.0 <7>[ 55.005351] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004551cf <7>[ 55.005485] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7>[ 55.005576] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7>[ 55.005661] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 55.005741] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cac <7>[ 55.005822] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 55.005898] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 55.005974] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 55.006048] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 55.006131] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 55.006203] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 55.006283] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 55.006366] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 55.006443] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 55.006528] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 55.006654] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7>[ 55.017967] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 55.018812] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 55.019057] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,000000df <7>[ 55.019172] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,000000df <7>[ 55.019278] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7>[ 55.019364] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7>[ 55.019440] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6>[ 55.658531] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6>[ 55.658533] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6>[ 55.658534] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7>[ 55.658678] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7>[ 55.658806] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6217]: allow rw access <7>[ 55.658923] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62af]: allow rw access <7>[ 55.659040] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 55.659149] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 55.659264] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 55.659409] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7>[ 55.659536] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7>[ 55.659676] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7>[ 55.659777] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 55.659883] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 55.659999] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 55.661133] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7>[ 55.661247] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7>[ 55.661359] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7>[ 55.661457] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7>[ 55.661553] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7>[ 55.661648] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7>[ 55.661741] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7>[ 55.661834] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7>[ 55.661924] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7>[ 55.662025] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7>[ 55.662142] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7>[ 55.662260] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7>[ 55.662375] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7>[ 55.662472] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7>[ 55.662559] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7>[ 55.662647] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7>[ 55.662737] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7>[ 55.662826] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7>[ 55.662913] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7>[ 55.663014] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7>[ 55.663121] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7>[ 55.663227] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7>[ 55.663330] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7>[ 55.663410] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7>[ 55.663489] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7>[ 55.663567] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7>[ 55.663655] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7>[ 55.663743] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7>[ 55.663829] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7>[ 55.663916] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210 <7>[ 55.664018] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8 <7>[ 55.664113] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc <7>[ 55.664209] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01 <7>[ 55.664303] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c <7>[ 55.664390] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7>[ 55.664478] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7>[ 55.664564] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7>[ 55.664647] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7>[ 55.664730] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7>[ 55.664818] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7>[ 55.664904] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7>[ 55.665006] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7>[ 55.665384] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7>[ 55.665461] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7>[ 55.665538] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7>[ 55.665615] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7>[ 55.665923] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7>[ 55.666011] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7>[ 55.666107] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7>[ 55.666201] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7>[ 55.666555] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7>[ 55.666642] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7>[ 55.666719] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7>[ 55.666795] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7>[ 55.666870] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7>[ 55.666962] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7>[ 55.667046] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7>[ 55.667569] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7>[ 55.667707] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004551cf <7>[ 55.667790] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7>[ 55.667881] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7>[ 55.667969] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 55.668065] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cac <7>[ 55.668155] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 55.668236] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 55.668307] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 55.668376] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 55.668445] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 55.668513] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 55.668580] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 55.668647] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 55.668713] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 55.668802] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7>[ 55.668978] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7>[ 55.670443] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0x1708000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 55.673377] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7>[ 55.690470] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 49152) <7>[ 55.701385] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 55.701783] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 55.703192] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4144 dwords <7>[ 55.703376] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7>[ 55.703500] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7>[ 55.703612] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7>[ 55.703723] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7>[ 55.703832] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7>[ 55.703937] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7>[ 55.704041] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7>[ 55.704145] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000 (MCR) <7>[ 55.707957] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7>[ 55.708216] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606 <7>[ 55.708403] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7>[ 55.711138] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7>[ 55.711315] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6>[ 55.716266] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.58.0 <7>[ 55.725294] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x017e71cf <7>[ 55.725571] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 55.725787] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7>[ 55.726005] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 55.726195] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000043d0 <7>[ 55.726370] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 55.726541] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 55.726704] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 55.726859] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 55.727116] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 55.727286] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 55.727436] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 55.727570] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 55.727703] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6>[ 55.729316] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6>[ 55.731824] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6>[ 55.733042] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7>[ 55.733173] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 55.733328] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7>[ 55.754533] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 55.755196] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 55.755622] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000,00000000 <7>[ 55.755951] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000,00000000 <7>[ 55.756271] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7>[ 55.756657] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7>[ 55.756946] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6>[ 55.757234] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6>[ 55.757238] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6>[ 55.757241] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6>[ 55.757244] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6>[ 55.757247] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6>[ 55.757249] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6>[ 55.757252] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6>[ 55.757255] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6>[ 55.757258] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6>[ 55.757260] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7>[ 55.757596] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7>[ 55.757953] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7>[ 55.758311] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7>[ 55.758723] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7>[ 55.759063] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7>[ 55.759354] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7>[ 55.759664] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7>[ 55.759945] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7>[ 55.760198] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7>[ 55.760506] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7>[ 55.760981] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7>[ 55.761211] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7>[ 55.761437] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7>[ 55.761661] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7>[ 55.761880] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7>[ 55.762082] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7>[ 55.762271] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7>[ 55.762500] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7>[ 55.762677] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7>[ 55.762852] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7>[ 55.763092] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7>[ 55.764428] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7>[ 55.764582] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7>[ 55.764731] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7>[ 55.764877] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7>[ 55.765013] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7>[ 55.765146] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7>[ 55.765272] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7>[ 55.765416] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xc50c] = 0x00010002 <7>[ 55.765542] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7>[ 55.765657] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7>[ 55.765776] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7>[ 55.765899] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7>[ 55.766024] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7>[ 55.766144] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7>[ 55.766258] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7>[ 55.766380] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7>[ 55.766488] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7>[ 55.766592] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7>[ 55.766693] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7>[ 55.766792] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7>[ 55.766892] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7>[ 55.766990] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7>[ 55.767083] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7>[ 55.767174] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7>[ 55.767264] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7>[ 55.767365] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7>[ 55.767452] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7>[ 55.767537] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7>[ 55.767621] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7>[ 55.767705] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7>[ 55.767799] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7>[ 55.767894] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7>[ 55.767984] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7>[ 55.768068] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7>[ 55.768149] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7>[ 55.768228] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7>[ 55.768317] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7>[ 55.768404] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7>[ 55.768488] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7>[ 55.768572] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7>[ 55.768649] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7>[ 55.769054] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7>[ 55.769146] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7>[ 55.769238] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7>[ 55.769346] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7>[ 55.769434] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7>[ 55.769539] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7>[ 55.769633] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7>[ 55.769719] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7>[ 55.769796] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7>[ 55.769870] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7>[ 55.769944] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7>[ 55.770018] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7>[ 55.770397] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7>[ 55.770480] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7>[ 55.770560] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7>[ 55.771185] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7>[ 55.771371] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x017e71cf <7>[ 55.771461] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 55.771544] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7>[ 55.771621] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 55.771696] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000043d0 <7>[ 55.771768] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 55.771839] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 55.771908] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 55.771976] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 55.772043] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 55.772110] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 55.772175] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 55.772250] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 55.772315] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7>[ 55.772401] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7>[ 55.772505] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7>[ 55.773844] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x2c63000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 55.791860] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 49152) <7>[ 55.813133] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 55.813625] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 55.815255] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7>[ 55.815510] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 55.818559] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7>[ 55.818767] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 55.821977] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7>[ 55.822301] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 55.864803] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7>[ 55.865902] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 55.866465] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 55.867159] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 55.867714] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 55.868792] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7>[ 55.869259] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7>[ 55.869735] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7>[ 55.872074] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 0: start 0x90008 <7>[ 55.872686] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 1: start 0x90108 <7>[ 55.873260] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 2: start 0x90208 <7>[ 55.873872] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 3: start 0x90308 <7>[ 55.874365] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 4: start 0x903c8 <7>[ 55.874934] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 0: start 0x98008 <7>[ 55.875368] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 1: start 0x98108 <7>[ 55.875817] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 2: start 0x98208 <7>[ 55.876261] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 3: start 0x98308 <7>[ 55.876641] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 4: start 0x983c8 <7>[ 55.876982] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 0: start 0x52008 <7>[ 55.877319] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 1: start 0x52108 <7>[ 55.877659] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 2: start 0x52208 <7>[ 55.877962] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 3: start 0x52308 <7>[ 55.878245] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 4: start 0x523c8 <7>[ 55.878948] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 55.879210] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 55.879467] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7>[ 55.879787] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: no [fastset] <7>[ 55.880093] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:388:pipe C] enable: no [fastset] <7>[ 55.881442] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7>[ 55.881806] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7>[ 55.892861] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe B] <7>[ 55.893561] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:388:pipe C] <7>[ 55.910828] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:392:eDP-1] adding connector to sysfs <7>[ 55.915847] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:392:eDP-1] backlight device intel_backlight registered <7>[ 55.916220] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:392:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 55.916510] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:392:eDP-1] Panel prepare <7>[ 55.917203] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 55.918875] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:392:eDP-1] generating connector hotplug event <7>[ 55.918962] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:401:DP-1] adding connector to sysfs <7>[ 55.919461] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7>[ 55.920188] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:401:DP-1] generating connector hotplug event <7>[ 55.920226] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:413:DP-2] adding connector to sysfs <7>[ 55.920617] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7>[ 55.921347] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:413:DP-2] generating connector hotplug event <7>[ 55.921383] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:421:DP-3] adding connector to sysfs <7>[ 55.922020] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 55.922673] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:421:DP-3] generating connector hotplug event <6>[ 55.922700] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7>[ 55.922727] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6>[ 55.933322] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 55.937313] input: Video Bus as /devices/pci0000:00/LNXVIDEO:00/input/input5 <7>[ 55.938743] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 55.938910] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7>[ 55.939449] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 55.939454] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 55.940428] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:34:plane 1A] no fb, skipping <6>[ 55.941123] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7>[ 55.941611] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:401:DP-1] <7>[ 55.941606] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 55.941887] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.942091] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:401:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 55.942256] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:413:DP-2] <7>[ 55.942443] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.942667] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:413:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 55.942817] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:421:DP-3] <7>[ 55.942981] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.943117] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:421:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 55.943256] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 55.944002] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:269:pipe B] not active, skipping <7>[ 55.944136] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:388:pipe C] not active, skipping <7>[ 55.944253] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7>[ 55.944564] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 55.944908] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:392:eDP-1] <7>[ 55.944916] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:392:eDP-1] <7>[ 55.945412] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 55.945825] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 55.945980] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.946125] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.946355] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 55.946362] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.946364] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.946365] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 55.946369] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 55.946371] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.946373] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] ELD monitor <5>[ 55.946378] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.946380] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] ELD size 20, SAD count 0 <5>[ 55.946383] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.946410] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:392:eDP-1] VRR capable: yes <7>[ 55.946570] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:392:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 55.946706] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:392:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 55.947039] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:392:eDP-1] status updated from unknown to connected <7>[ 55.947915] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 55.947986] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <5>[ 55.948276] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.948279] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.948280] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.948341] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:392:eDP-1] probed modes: <7>[ 55.948348] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 55.948351] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 55.948355] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:401:DP-1] <7>[ 55.948359] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:401:DP-1] <7>[ 55.948566] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:401:DP-1] disconnected <7>[ 55.948570] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:413:DP-2] <7>[ 55.948572] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:413:DP-2] <7>[ 55.948723] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 55.948730] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 55.948738] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:413:DP-2] disconnected <7>[ 55.948742] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:421:DP-3] <7>[ 55.948744] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:421:DP-3] <7>[ 55.948906] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:421:DP-3] disconnected <7>[ 55.948909] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:392:eDP-1] enabled? yes <7>[ 55.948912] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:401:DP-1] enabled? no <7>[ 55.948914] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:413:DP-2] enabled? no <7>[ 55.948915] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:421:DP-3] enabled? no <7>[ 55.949037] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 55.949058] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:392:eDP-1] found preferred mode: 2880x1800 <7>[ 55.949061] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 55.949072] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0) <7>[ 55.949175] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 55.949191] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <6>[ 55.949313] xe 0000:00:02.0: [drm] Allocating fbdev: Stolen memory not preferred. <7>[ 55.956005] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb <6>[ 55.957067] fbcon: xedrmfb (fb0) is primary device <7>[ 55.959326] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:392:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 55.959513] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:391:DDI A/PHY A][CRTC:150:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7>[ 55.959671] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000 <7>[ 55.959835] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 55.959994] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:391:DDI A/PHY A] [CRTC:150:pipe A] <7>[ 55.960150] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288) <7>[ 55.960319] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in dpll_hw_state <7>[ 55.960468] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7>[ 55.960613] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 55.960758] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: yes, <7>[ 55.960899] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 40960, rem: 0, den: 1, <7>[ 55.961041] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 55.961180] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 55.961335] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 55.961473] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 55.961610] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 55.961743] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 55.961866] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 55.961978] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 55.962090] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7>[ 55.962206] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 55.962339] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: no, <7>[ 55.962472] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 55.962602] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 55.962718] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 55.962847] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 55.962976] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 55.963106] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 55.963253] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 55.963381] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 55.963515] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 55.963648] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000) <7>[ 55.963778] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0) <7>[ 55.963906] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7>[ 55.964034] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing DPLL 0 <7>[ 55.964214] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7>[ 55.964347] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 55.964478] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7>[ 55.964591] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7>[ 55.964701] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7>[ 55.964810] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 55.964925] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.965030] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.965135] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.965326] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 55.965434] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.965548] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.965653] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.965757] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 55.965858] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.965970] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.966084] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.966201] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 55.966303] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.966397] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.966497] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.966596] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:144:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 55.966697] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:144:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.966789] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:144:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.966880] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:144:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.966992] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 1390840 num active planes 1 <7>[ 55.967152] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7>[ 55.967298] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7>[ 55.967438] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 55.967575] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 55.967711] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7>[ 55.967912] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated DPLL 0 <7>[ 55.968062] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving DPLL 0 <7>[ 55.968224] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset] <7>[ 55.968372] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 55.968523] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 55.968672] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 55.968819] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 55.968965] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 55.969117] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 55.969261] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7>[ 55.969405] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 55.969547] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 55.969691] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 55.969819] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 55.969944] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 55.970074] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 55.970199] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7>[ 55.970326] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7>[ 55.970452] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7>[ 55.970585] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7>[ 55.970724] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7>[ 55.970848] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7>[ 55.970979] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 55.971122] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 55.971252] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7>[ 55.971380] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 55.971512] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 55.971636] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 55.971768] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 55.971887] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 55.972006] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <6>[ 55.972073] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7>[ 55.972461] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 55.972598] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 55.972733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 55.972847] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 55.972962] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 55.972932] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7>[ 55.973119] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 55.973234] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 55.973346] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no, <7>[ 55.973457] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 55.973567] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 55.973676] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 55.973787] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 55.973898] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 55.974022] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 55.974148] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 55.974271] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 55.974392] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 55.974512] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 55.974631] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 55.974749] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 55.974865] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 55.974980] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 55.975110] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 55.975222] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 55.975333] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 55.975446] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 55.975551] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 55.975644] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 55.975748] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 55.975860] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:393] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 55.975980] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 55.976102] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 55.976229] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7>[ 55.976361] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7>[ 55.976493] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7>[ 55.976616] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7>[ 55.976738] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7>[ 55.988076] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.988259] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.988379] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.988496] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.988608] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.988718] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.988873] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.989011] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.989134] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.989247] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.989359] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.989458] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.989556] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.989658] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.989774] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.989902] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.990029] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.990138] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.990244] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.990346] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.990450] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.990552] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.990654] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.990773] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.990896] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.991020] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.991128] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.991236] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.991345] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.991452] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.991559] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.991668] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.991791] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.991917] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.992043] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.992150] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.997588] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7>[ 55.998335] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7>[ 55.998499] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <6>[ 56.000953] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 56.004798] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 56.005609] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 56.006251] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 56.203613] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:392:eDP-1] set backlight PWM = 0 <7>[ 56.205385] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7>[ 56.210575] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turn panel power off <7>[ 56.211086] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 56.211126] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 56.211730] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - short <7>[ 56.211795] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 56.263669] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 56.264042] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - short <7>[ 56.272640] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 56.273387] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:391:DDI A/PHY A] <7>[ 56.273476] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:150:pipe A] <7>[ 56.273935] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:391:DDI A/PHY A] <7>[ 56.274952] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7>[ 56.275576] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7>[ 56.276785] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x1341b072) <7>[ 56.277317] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:391:DDI A/PHY A] <7>[ 56.277791] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:400:DDI TC1/PHY TC1] <7>[ 56.278252] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST A] <7>[ 56.278738] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST B] <7>[ 56.279182] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST C] <7>[ 56.279649] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:412:DDI TC2/PHY TC2] <7>[ 56.280061] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST A] <7>[ 56.280516] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST B] <7>[ 56.280934] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST C] <7>[ 56.281371] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:420:DDI TC3/PHY TC3] <7>[ 56.281799] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST A] <7>[ 56.282261] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST B] <7>[ 56.282674] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST C] <7>[ 56.283156] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 56.285003] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:150:pipe A] <7>[ 56.285592] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7>[ 56.287932] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turn panel power on <7>[ 56.288382] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 wait for panel power cycle (485 ms remaining) <7>[ 56.297357] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 56.297656] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - long <7>[ 56.297929] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 56.298212] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:391:DDI A/PHY A] <7>[ 56.409662] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7>[ 56.771837] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 56.852173] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 56.852813] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 56.853425] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 56.888951] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 56.889503] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - long <7>[ 56.889969] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 56.890523] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:391:DDI A/PHY A] <7>[ 56.954095] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.954098] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.954190] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 57.060134] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 57.060709] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turning VDD on <7>[ 57.061185] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 57.064240] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 57.065789] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 57.066915] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7>[ 57.068332] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 57.069808] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 57.071110] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 57.071629] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7>[ 57.073266] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 57.073708] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7>[ 57.074652] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7>[ 57.075228] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7>[ 57.075621] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7>[ 57.076108] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:392:eDP-1] set backlight PWM = 192000 <7>[ 57.092229] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7>[ 57.094678] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:392:eDP-1] <7>[ 57.095383] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A] <7>[ 57.097445] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 57.099448] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <6>[ 57.102106] Console: switching to colour frame buffer device 180x56 <7>[ 57.101914] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=192000/192000 <7>[ 57.102796] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:392:eDP-1] set backlight level = 192000 <7>[ 57.103362] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:392:eDP-1] set backlight PWM = 192000 <6>[ 57.130619] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7>[ 57.130902] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 57.130649] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7>[ 57.130959] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 57.132554] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:392:eDP-1] <7>[ 57.132586] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:392:eDP-1] <7>[ 57.135298] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7>[ 57.135941] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7>[ 57.135970] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 57.136562] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7>[ 57.136827] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 57.137094] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7>[ 57.137369] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 57.137803] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7>[ 57.137870] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 57.138299] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7>[ 57.138556] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 57.138569] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 57.138573] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.138576] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 57.138582] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 57.138588] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.138591] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] ELD monitor <5>[ 57.138608] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.138610] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] ELD size 20, SAD count 0 <5>[ 57.138616] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.138662] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7>[ 57.138665] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:392:eDP-1] VRR capable: yes <7>[ 57.139000] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7>[ 57.139003] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:392:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 57.139338] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:392:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 57.139336] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7>[ 57.139643] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <5>[ 57.139985] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 57.139989] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 57.139992] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.139926] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7>[ 57.140136] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:392:eDP-1] probed modes: <7>[ 57.140152] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 57.140158] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 57.140165] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:401:DP-1] <7>[ 57.140172] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:401:DP-1] <7>[ 57.140269] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7>[ 57.140528] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7>[ 57.140539] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 57.140832] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:401:DP-1] disconnected <7>[ 57.140838] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:413:DP-2] <7>[ 57.140773] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7>[ 57.140842] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:413:DP-2] <7>[ 57.141030] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7>[ 57.141171] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 57.141282] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7>[ 57.141414] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:413:DP-2] disconnected <7>[ 57.141420] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:421:DP-3] <7>[ 57.141424] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:421:DP-3] <7>[ 57.141501] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7>[ 57.141690] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 57.141707] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7>[ 57.141911] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:421:DP-3] disconnected <7>[ 57.141916] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:392:eDP-1] enabled? yes <7>[ 57.141920] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:401:DP-1] enabled? no <7>[ 57.141922] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:413:DP-2] enabled? no <7>[ 57.141925] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:421:DP-3] enabled? no <7>[ 57.141910] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7>[ 57.142058] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 57.142088] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:392:eDP-1] found preferred mode: 2880x1800 <7>[ 57.142103] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 57.142159] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0) <7>[ 57.142268] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7>[ 57.142455] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7>[ 57.144119] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7>[ 57.144320] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7>[ 57.144512] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7>[ 57.144701] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x80000000) <7>[ 57.144902] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7>[ 57.145107] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xa0000000) <7>[ 57.145311] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7>[ 57.145466] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa8000000) <7>[ 57.145633] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 57.147915] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7>[ 57.159510] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 57.175698] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 57.176673] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 57.178451] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 57.182977] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 57.184411] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 57.209204] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 57.209460] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 57.209658] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 57.211514] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 57.212384] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 57.227021] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 57.227239] [IGT] xe_module_load: finished subtest load, SUCCESS <7>[ 57.227734] [IGT] xe_module_load: exiting, ret=0 <7>[ 57.262370] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 57.262941] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 57.264434] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 58.153911] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 58.154064] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 58.154101] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 59.674722] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turning VDD off <7>[ 59.675161] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067