<5>[ 0.000000] Linux version 7.0.0-rc2-lgci-xe-xe-4675-fce8d7fb2107068c2-debug+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04.1) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Fri Mar 6 23:53:54 UTC 2026 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] System RAM <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x0000000080800000-0x00000000bfffffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x00000000d0000000-0x00000000fed1ffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] device reserved <6>[ 0.000000] BIOS-e820: [gap 0x00000000fed80000-0x00000000ff1fffff] <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] device reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] System RAM <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x69916018 ESRT=0x68ff8518 MOKvar=0x6ccfb000 <6>[ 0.000000] efi: Remove mem259: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] device reserved <6>[ 0.000000] efi: Remove mem261: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] device reserved <6>[ 0.000000] SMBIOS 3.8 present. <6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D99.2508051732 08/05/2025 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3100.000 MHz processor <6>[ 0.000000] tsc: Detected 3110.400 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] System RAM ==> device reserved <7>[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] System RAM <6>[ 0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000017] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs <6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000383] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000385] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.004882] esrt: Reserving ESRT space from 0x0000000068ff8518 to 0x0000000068ff8668. <7>[ 0.004890] e820: update [mem 0x68ff8000-0x68ff8fff] System RAM ==> device reserved <6>[ 0.004907] Using GB pages for direct mapping <6>[ 0.005586] printk: log buffer data + meta data: 1048576 + 4456448 = 5505024 bytes <6>[ 0.005587] printk: early log buf free: 258480(98%) <6>[ 0.005588] Secure boot disabled <6>[ 0.005589] ACPI: Early table checksum verification disabled <6>[ 0.005592] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.005595] ACPI: XSDT 0x000000006FF70228 000194 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005599] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013) <6>[ 0.005602] ACPI: DSDT 0x000000006FFB6000 02555F (v02 INTEL LNL 00000002 01000013) <6>[ 0.005603] ACPI: FACS 0x000000006FEF1000 000040 <6>[ 0.005605] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005606] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005608] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005609] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005610] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005612] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005613] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005614] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005616] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005617] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005618] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000) <6>[ 0.005620] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005621] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005622] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930) <6>[ 0.005624] ACPI: SSDT 0x000000006FFDD000 009176 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005625] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005626] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930) <6>[ 0.005628] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005629] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005631] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005632] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005633] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013) <6>[ 0.005634] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013) <6>[ 0.005636] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930) <6>[ 0.005637] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005639] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930) <6>[ 0.005641] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930) <6>[ 0.005642] ACPI: LPIT 0x000000006FF85000 0000CC (v01 INTEL LNL 00000002 01000013) <6>[ 0.005643] ACPI: SSDT 0x000000006FF84000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005644] ACPI: SSDT 0x000000006FF83000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005646] ACPI: DBGP 0x000000006FF82000 000034 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005647] ACPI: DBG2 0x000000006FF81000 000054 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005648] ACPI: NHLT 0x000000006FF80000 0002E3 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005650] ACPI: SSDT 0x000000006FF7E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005651] ACPI: SSDT 0x000000006FF77000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005652] ACPI: ECDT 0x000000006FF76000 000069 (v01 LNL 00000002 01000013) <6>[ 0.005654] ACPI: DMAR 0x000000006FF75000 0000D8 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005655] ACPI: FPDT 0x000000006FF74000 000044 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005656] ACPI: SSDT 0x000000006FF73000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930) <6>[ 0.005658] ACPI: SSDT 0x000000006FF71000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005659] ACPI: SSDT 0x000000006FF6D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005660] ACPI: SDEV 0x000000006FFA8000 000046 (v01 00000000 00000000) <6>[ 0.005662] ACPI: SSDT 0x000000006FF62000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930) <6>[ 0.005663] ACPI: PHAT 0x000000006FF61000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D) <6>[ 0.005664] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005666] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113] <6>[ 0.005666] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb55e] <6>[ 0.005667] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f] <6>[ 0.005667] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387] <6>[ 0.005668] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9] <6>[ 0.005668] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa] <6>[ 0.005668] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.005668] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.005669] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.005669] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.005669] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.005670] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.005670] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6] <6>[ 0.005670] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f] <6>[ 0.005670] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1] <6>[ 0.005671] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f] <6>[ 0.005671] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4] <6>[ 0.005671] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6175] <6>[ 0.005672] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df] <6>[ 0.005672] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2] <6>[ 0.005672] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e] <6>[ 0.005672] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955] <6>[ 0.005673] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037] <6>[ 0.005673] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027] <6>[ 0.005673] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7] <6>[ 0.005674] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b] <6>[ 0.005674] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2] <6>[ 0.005674] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320] <6>[ 0.005675] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469] <6>[ 0.005675] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815] <6>[ 0.005675] ACPI: Reserving LPIT table memory at [mem 0x6ff85000-0x6ff850cb] <6>[ 0.005675] ACPI: Reserving SSDT table memory at [mem 0x6ff84000-0x6ff84d5b] <6>[ 0.005676] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff831ef] <6>[ 0.005676] ACPI: Reserving DBGP table memory at [mem 0x6ff82000-0x6ff82033] <6>[ 0.005676] ACPI: Reserving DBG2 table memory at [mem 0x6ff81000-0x6ff81053] <6>[ 0.005677] ACPI: Reserving NHLT table memory at [mem 0x6ff80000-0x6ff802e2] <6>[ 0.005677] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff7f15b] <6>[ 0.005677] ACPI: Reserving SSDT table memory at [mem 0x6ff77000-0x6ff7d53a] <6>[ 0.005678] ACPI: Reserving ECDT table memory at [mem 0x6ff76000-0x6ff76068] <6>[ 0.005678] ACPI: Reserving DMAR table memory at [mem 0x6ff75000-0x6ff750d7] <6>[ 0.005678] ACPI: Reserving FPDT table memory at [mem 0x6ff74000-0x6ff74043] <6>[ 0.005678] ACPI: Reserving SSDT table memory at [mem 0x6ff73000-0x6ff7386c] <6>[ 0.005679] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff723da] <6>[ 0.005679] ACPI: Reserving SSDT table memory at [mem 0x6ff6d000-0x6ff6f462] <6>[ 0.005679] ACPI: Reserving SDEV table memory at [mem 0x6ffa8000-0x6ffa8045] <6>[ 0.005680] ACPI: Reserving SSDT table memory at [mem 0x6ff62000-0x6ff6c4f9] <6>[ 0.005680] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff617bf] <6>[ 0.005680] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037] <6>[ 0.005759] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.005964] No NUMA configuration found <6>[ 0.005965] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff] <6>[ 0.005969] NODE_DATA(0) allocated [mem 0x87f292e40-0x87f2bdfff] <6>[ 0.006522] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.006526] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.006576] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.006577] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.006578] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.006581] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.006581] ACPI: HPET id: 0x8086a701 base: 0xfed00000 <7>[ 0.006588] e820: update [mem 0x6992d000-0x69947fff] System RAM ==> device reserved <6>[ 0.006593] TSC deadline timer available <6>[ 0.006595] CPU topo: Max. logical packages: 1 <6>[ 0.006595] CPU topo: Max. logical dies: 1 <6>[ 0.006596] CPU topo: Max. dies per package: 1 <6>[ 0.006597] CPU topo: Max. threads per core: 1 <6>[ 0.006598] CPU topo: Num. cores per package: 8 <6>[ 0.006598] CPU topo: Num. threads per package: 8 <6>[ 0.006598] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs <6>[ 0.006609] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.006610] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.006611] PM: hibernation: Registered nosave memory: [mem 0x68ff8000-0x68ff8fff] <6>[ 0.006612] PM: hibernation: Registered nosave memory: [mem 0x6992d000-0x69947fff] <6>[ 0.006613] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fffefff] <6>[ 0.006614] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x1044fffff] <6>[ 0.006615] [gap 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.006616] Booting paravirtualized kernel on bare hardware <6>[ 0.006618] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.006654] Zone ranges: <6>[ 0.006654] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006656] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006657] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.006657] Device empty <6>[ 0.006658] Movable zone start for each node <6>[ 0.006659] Early memory node ranges <6>[ 0.006659] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006660] node 0: [mem 0x0000000000100000-0x000000006cac0fff] <6>[ 0.006660] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.006661] node 0: [mem 0x0000000104500000-0x000000087f7fffff] <6>[ 0.006662] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.006667] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006682] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.008275] On node 0, zone DMA32: 13630 pages in unavailable ranges <6>[ 0.036142] On node 0, zone Normal: 17664 pages in unavailable ranges <6>[ 0.036149] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.036156] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 <6>[ 0.036481] percpu: Embedded 87 pages/cpu s233472 r8192 d114688 u524288 <7>[ 0.036486] pcpu-alloc: s233472 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.036488] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 <5>[ 0.036503] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.036608] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.036626] random: crng init done <6>[ 0.038460] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.039366] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.039426] software IO TLB: area num 8. <6>[ 0.046818] Fallback order for Node 0: 0 <6>[ 0.046821] Built 1 zonelists, mobility grouping on. Total pages: 8289632 <6>[ 0.046822] Policy zone: Normal <6>[ 0.046832] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.046833] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.046836] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.047752] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.079740] ********************************************************** <4>[ 0.079741] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.079741] ** ** <4>[ 0.079741] ** This system shows unhashed kernel memory addresses ** <4>[ 0.079742] ** via the console, logs, and other interfaces. This ** <4>[ 0.079742] ** might reduce the security of your system. ** <4>[ 0.079742] ** ** <4>[ 0.079742] ** If you see this message and you are not debugging ** <4>[ 0.079743] ** the kernel, report this immediately to your system ** <4>[ 0.079743] ** administrator! ** <4>[ 0.079743] ** ** <4>[ 0.079743] ** Use hash_pointers=always to force this mode off ** <4>[ 0.079743] ** ** <4>[ 0.079743] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.079744] ********************************************************** <6>[ 0.080876] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 0.089349] ftrace: allocating 61417 entries in 240 pages <6>[ 0.089350] ftrace: allocated 240 pages with 4 groups <6>[ 0.090401] Dynamic Preempt: lazy <6>[ 0.090916] Running RCU self tests <6>[ 0.090916] Running RCU synchronous self tests <6>[ 0.090917] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.090917] rcu: RCU lockdep checking is enabled. <6>[ 0.090918] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. <6>[ 0.090918] Trampoline variant of Tasks RCU enabled. <6>[ 0.090919] Rude variant of Tasks RCU enabled. <6>[ 0.090919] Tracing variant of Tasks RCU enabled. <6>[ 0.090919] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.090920] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 <6>[ 0.090987] Running RCU synchronous self tests <6>[ 0.090990] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.090993] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.102396] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 <6>[ 0.102884] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.103318] Console: colour dummy device 80x25 <6>[ 0.103328] printk: legacy console [tty0] enabled <6>[ 0.104514] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.104521] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.104525] ... MAX_LOCK_DEPTH: 48 <6>[ 0.104529] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.104532] ... CLASSHASH_SIZE: 4096 <6>[ 0.104536] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.104540] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.104544] ... CHAINHASH_SIZE: 262144 <6>[ 0.104548] memory used by lock dependency info: 54145 kB <6>[ 0.104552] memory used for stack traces: 4224 kB <6>[ 0.104556] per task-struct memory footprint: 1920 bytes <6>[ 0.104608] ACPI: Core revision 20251212 <6>[ 0.105499] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.105563] APIC: Switch to symmetric I/O mode setup <6>[ 0.105568] DMAR: Host address width 38 <6>[ 0.105572] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.105607] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.105645] DMAR: DRHD base: 0x000000fc810000 flags: 0x0 <6>[ 0.105670] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.105700] DMAR: DRHD base: 0x000000fc820000 flags: 0x1 <6>[ 0.105724] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda <6>[ 0.105763] DMAR: SATC flags: 0x1 <6>[ 0.105774] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2 <6>[ 0.105780] DMAR-IR: HPET id 0 under DRHD base 0xfc820000 <6>[ 0.105785] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.107832] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.113056] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 0.113074] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400) <6>[ 0.113152] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.113159] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.113340] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.113345] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.113354] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.113366] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.113373] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.113378] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.113383] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.113390] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.113406] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.113412] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.113417] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.113422] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.113428] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.113434] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.113441] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.113446] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.113451] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.113456] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.113462] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.114068] Freeing SMP alternatives memory: 56K <6>[ 0.114068] pid_max: default: 32768 minimum: 301 <6>[ 0.114068] landlock: Up and running. <6>[ 0.114068] Yama: becoming mindful. <6>[ 0.114068] AppArmor: AppArmor initialized <6>[ 0.114068] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.114068] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.114068] VFS: Finished mounting rootfs on nullfs <6>[ 0.114068] Running RCU synchronous self tests <6>[ 0.114068] Running RCU synchronous self tests <6>[ 0.114068] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1) <6>[ 0.114068] Performance Events: XSAVE Architectural LBR, PEBS fmt6+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.114117] core: cpu_core PMU driver: <6>[ 0.114125] ... version: 6 <6>[ 0.114129] ... bit width: 48 <6>[ 0.114133] ... generic counters: 10 <6>[ 0.114137] ... generic bitmap: 00000000000003ff <6>[ 0.114141] ... fixed-purpose counters: 4 <6>[ 0.114145] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.114149] ... value mask: 0000ffffffffffff <6>[ 0.114154] ... max period: 00007fffffffffff <6>[ 0.114158] ... global_ctrl mask: 0001000f000003ff <6>[ 0.114238] signal: max sigframe size: 3632 <6>[ 0.114263] Estimated ratio of average max frequency by base frequency (times 1024): 1189 <6>[ 0.114372] rcu: Hierarchical SRCU implementation. <6>[ 0.114376] rcu: Max phase no-delay instances is 400. <6>[ 0.114534] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.116539] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.116813] smp: Bringing up secondary CPUs ... <6>[ 0.117205] smpboot: x86: Booting SMP configuration: <6>[ 0.117211] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 <6>[ 0.011000] core: The event 0x5d0 is not supported as an auto-counter reload event. <6>[ 0.011000] core: cpu_atom PMU driver: <6>[ 0.011000] ... version: 6 <6>[ 0.011000] ... bit width: 48 <6>[ 0.011000] ... generic counters: 8 <6>[ 0.011000] ... generic bitmap: 00000000000000ff <6>[ 0.011000] ... fixed-purpose counters: 6 <6>[ 0.011000] ... fixed-purpose bitmap: 0000000000000077 <6>[ 0.011000] ... value mask: 0000ffffffffffff <6>[ 0.011000] ... max period: 00007fffffffffff <6>[ 0.011000] ... global_ctrl mask: 00000077000000ff <6>[ 0.127166] smp: Brought up 1 node, 8 CPUs <6>[ 0.127166] smpboot: Total of 8 processors activated (49766.40 BogoMIPS) <6>[ 0.129377] Memory: 32356600K/33158528K available (25919K kernel code, 5834K rwdata, 9720K rodata, 5764K init, 67904K bss, 777988K reserved, 0K cma-reserved) <6>[ 0.129875] devtmpfs: initialized <6>[ 0.129875] x86/mm: Memory block size: 128MB <6>[ 0.168371] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes) <6>[ 0.169000] Running RCU synchronous self tests <6>[ 0.169028] Running RCU synchronous self tests <6>[ 0.170355] Running RCU Tasks wait API self tests <6>[ 0.170367] Running RCU Tasks Rude wait API self tests <6>[ 0.170367] Running RCU Tasks Trace wait API self tests <6>[ 0.171115] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.171182] posixtimers hash table entries: 4096 (order: 7, 294912 bytes, linear) <6>[ 0.171312] futex hash table entries: 2048 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear). <6>[ 0.172521] PM: RTC time: 03:26:35, date: 2026-03-08 <6>[ 0.173679] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.175670] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.176258] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.176697] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.176818] audit: initializing netlink subsys (disabled) <5>[ 0.177190] audit: type=2000 audit(1772940395.064:1): state=initialized audit_enabled=0 res=1 <6>[ 0.178090] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.178505] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.178510] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.178525] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.178534] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.178542] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.179116] cpuidle: using governor ladder <6>[ 0.179128] cpuidle: using governor menu <6>[ 0.179241] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.179888] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.179942] PCI: Using configuration type 1 for base access <6>[ 0.180246] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.182127] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.182138] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.182148] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.182156] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.186610] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.186628] raid6: using avx2x2 recovery algorithm <6>[ 0.187559] fbcon: Taking over console <6>[ 0.187833] ACPI: Added _OSI(Module Device) <6>[ 0.187844] ACPI: Added _OSI(Processor Device) <6>[ 0.187856] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.792581] ACPI: 31 ACPI AML tables successfully acquired and loaded <6>[ 0.807152] ACPI: EC: EC started <6>[ 0.807163] ACPI: EC: interrupt blocked <6>[ 0.813240] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.813264] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 0.914158] Callback from call_rcu_tasks() invoked. <6>[ 1.187666] ACPI: \_SB_: platform _OSC: OS support mask [006e7eff] <6>[ 1.206126] ACPI: \_SB_: platform _OSC: OS control mask [006e7eff] <6>[ 1.212622] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.212639] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.298913] ACPI: Interpreter enabled <6>[ 1.299242] ACPI: PM: (supports S0 S4 S5) <6>[ 1.299254] ACPI: Using IOAPIC for interrupt routing <6>[ 1.314858] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.314879] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.374904] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.374984] ACPI: Enabled 13 GPEs in block 80 to DF <6>[ 1.499871] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource <6>[ 1.501085] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource <6>[ 1.510816] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.920826] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 1.944454] ACPI: \_SB_.PC00.RP02.PXP_: New power resource <6>[ 2.101333] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource <6>[ 2.104309] ACPI: \_SB_.PC00.RP04.PXP_: New power resource <6>[ 2.118884] ACPI: \_SB_.PC00.RP05.PXP_: New power resource <6>[ 2.135654] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 2.136130] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 2.136599] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.409324] ACPI: \_TZ_.FN00: New power resource <6>[ 2.410412] ACPI: \_TZ_.FN01: New power resource <6>[ 2.411422] ACPI: \_TZ_.FN02: New power resource <6>[ 2.412403] ACPI: \_TZ_.FN03: New power resource <6>[ 2.413329] ACPI: \_TZ_.FN04: New power resource <6>[ 2.416136] ACPI: \PIN_: New power resource <6>[ 2.422346] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.422377] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.430490] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 2.443222] PCI host bridge to bus 0000:00 <6>[ 2.443257] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.443266] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.443273] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.443281] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 2.443288] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window] <6>[ 2.443296] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.449068] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.451818] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.451956] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref] <6>[ 2.451979] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref] <6>[ 2.452002] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref] <6>[ 2.452099] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.456484] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.456560] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit] <6>[ 2.460686] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.460760] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit] <6>[ 2.460781] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit] <6>[ 2.463774] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port <6>[ 2.463851] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.463877] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 2.463927] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 2.464149] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.464292] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.478332] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port <6>[ 2.478425] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.478452] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 2.478489] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 2.478706] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold <6>[ 2.478844] pci 0000:00:07.1: PTM enabled (root), 4ns granularity <6>[ 2.493007] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port <6>[ 2.493087] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.493113] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 2.493149] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 2.493368] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold <6>[ 2.493511] pci 0000:00:07.2: PTM enabled (root), 4ns granularity <6>[ 2.506235] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.506316] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit] <6>[ 2.506350] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.507079] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.507354] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit] <6>[ 2.507376] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit] <6>[ 2.508752] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.508855] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit] <6>[ 2.509000] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.518380] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.518489] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit] <6>[ 2.518509] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit] <6>[ 2.518637] pci 0000:00:0d.2: supports D1 D2 <6>[ 2.518648] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.522981] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.523153] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit] <6>[ 2.523173] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit] <6>[ 2.523301] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.523312] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.527582] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.527705] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit] <6>[ 2.527845] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.536220] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.536393] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit] <6>[ 2.536579] pci 0000:00:13.0: PME# supported from D3hot <6>[ 2.538484] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.538591] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit] <6>[ 2.538734] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.544883] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.545000] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit] <6>[ 2.545022] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit] <6>[ 2.545697] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.547188] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.575146] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.575511] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.601042] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.601357] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.626713] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.627068] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.652964] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.653364] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit] <6>[ 2.653847] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.666427] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port <6>[ 2.666499] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.666519] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 2.666537] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 2.666772] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 2.666907] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity <6>[ 2.681738] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port <6>[ 2.681878] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.681934] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 2.682467] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <6>[ 2.682738] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity <6>[ 2.698562] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.703278] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.703514] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit] <6>[ 2.703551] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit] <6>[ 2.703793] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.706090] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.706274] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit] <6>[ 2.706303] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.710031] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.710517] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.710634] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.711068] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.711068] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.712153] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint <6>[ 2.712272] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff] <6>[ 2.712294] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit] <6>[ 2.712315] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit] <6>[ 2.712621] pci 0000:7f:00.0: supports D1 D2 <6>[ 2.712633] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.714282] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.717227] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.718644] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint <6>[ 2.718750] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit] <6>[ 2.722545] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.722692] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 3.153006] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 3.153018] Low-power S0 idle used by default for system suspend <6>[ 3.305922] ACPI: EC: interrupt unblocked <6>[ 3.305942] ACPI: EC: event unblocked <6>[ 3.305978] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 3.305989] ACPI: EC: GPE=0x6e <6>[ 3.305999] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 3.306015] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 3.307098] iommu: Default domain type: Translated <6>[ 3.307109] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 3.309555] SCSI subsystem initialized <7>[ 3.309615] libata version 3.00 loaded. <6>[ 3.310225] ACPI: bus type USB registered <6>[ 3.310422] usbcore: registered new interface driver usbfs <6>[ 3.310513] usbcore: registered new interface driver hub <6>[ 3.310594] usbcore: registered new device driver usb <6>[ 3.310845] pps_core: LinuxPPS API ver. 1 registered <6>[ 3.310853] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 3.310888] PTP clock support registered <6>[ 3.311350] EDAC MC: Ver: 3.0.0 <6>[ 3.313401] efivars: Registered efivars operations <6>[ 3.315746] NetLabel: Initializing <6>[ 3.315756] NetLabel: domain hash size = 128 <6>[ 3.315763] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 3.315905] NetLabel: unlabeled traffic allowed by default <6>[ 3.315935] mctp: management component transport protocol core <6>[ 3.315944] NET: Registered PF_MCTP protocol family <6>[ 3.316036] PCI: Using ACPI for IRQ routing <7>[ 3.332672] PCI: pci_cache_line_size set to 64 bytes <6>[ 3.332930] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <6>[ 3.333044] e820: register RAM buffer resource [mem 0x0009f000-0x0009ffff] <6>[ 3.333070] e820: register RAM buffer resource [mem 0x68ff8000-0x6bffffff] <6>[ 3.333083] e820: register RAM buffer resource [mem 0x6992d000-0x6bffffff] <6>[ 3.333095] e820: register RAM buffer resource [mem 0x6cac1000-0x6fffffff] <6>[ 3.333108] e820: register RAM buffer resource [mem 0x87f800000-0x87fffffff] <6>[ 3.334208] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 3.334208] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 3.334208] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 3.334208] vgaarb: loaded <7>[ 3.337098] Monitor-Mwait will be used to enter C-1 state <7>[ 3.337194] Monitor-Mwait will be used to enter C-2 state <7>[ 3.337194] Monitor-Mwait will be used to enter C-3 state <6>[ 3.347425] clocksource: Switched to clocksource tsc-early <5>[ 3.348681] VFS: Disk quotas dquot_6.6.0 <6>[ 3.348723] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 3.350435] AppArmor: AppArmor Filesystem Enabled <6>[ 3.350585] acpi PNP0C02:00: Skipped [io 0x002e-0x002f] <6>[ 3.350596] acpi PNP0C02:00: Skipped [io 0x004e-0x004f] <6>[ 3.350604] acpi PNP0C02:00: Skipped [io 0x0061] <6>[ 3.350611] acpi PNP0C02:00: Skipped [io 0x0063] <6>[ 3.350618] acpi PNP0C02:00: Skipped [io 0x0065] <6>[ 3.350625] acpi PNP0C02:00: Skipped [io 0x0067] <6>[ 3.350632] acpi PNP0C02:00: Skipped [io 0x0070] <6>[ 3.350639] acpi PNP0C02:00: Skipped [io 0x0080] <6>[ 3.350645] acpi PNP0C02:00: Skipped [io 0x0092] <6>[ 3.350652] acpi PNP0C02:00: Skipped [io 0x00b2-0x00b3] <6>[ 3.350665] acpi PNP0C02:00: Reserved [io 0x0680-0x069f] <6>[ 3.350676] acpi PNP0C02:00: Reserved [io 0x164e-0x164f] <6>[ 3.350735] acpi PNP0C02:01: Reserved [io 0x06a4] <6>[ 3.350748] acpi PNP0C02:01: Reserved [io 0x06a0] <6>[ 3.352419] acpi PNP0C02:04: Reserved [mem 0xfedc0000-0xfedc7fff] <6>[ 3.352437] acpi PNP0C02:04: Reserved [mem 0xd8000000-0xd8000fff] <6>[ 3.352456] acpi PNP0C02:04: Could not reserve [mem 0x00000000-0x00000fff] <6>[ 3.352470] acpi PNP0C02:04: Reserved [mem 0xc0000000-0xcfffffff] <6>[ 3.352483] acpi PNP0C02:04: Reserved [mem 0xfed20000-0xfed7ffff] <6>[ 3.352497] acpi PNP0C02:04: Could not reserve [mem 0xfc800000-0xfc81ffff] <6>[ 3.352512] acpi PNP0C02:04: Could not reserve [mem 0xfed45000-0xfed8ffff] <6>[ 3.352526] acpi PNP0C02:04: Reserved [mem 0xfee00000-0xfeefffff] <6>[ 3.354677] acpi PNP0C02:05: Reserved [mem 0xfe000000-0xfe01ffff] <6>[ 3.354695] acpi PNP0C02:05: Reserved [mem 0xfe04c000-0xfe04ffff] <6>[ 3.354711] acpi PNP0C02:05: Reserved [mem 0xfe050000-0xfe0affff] <6>[ 3.354726] acpi PNP0C02:05: Reserved [mem 0xfe0d0000-0xfe0fffff] <6>[ 3.354741] acpi PNP0C02:05: Reserved [mem 0xfe200000-0xfe7fffff] <6>[ 3.354757] acpi PNP0C02:05: Reserved [mem 0xff000000-0xffffffff] <6>[ 3.354772] acpi PNP0C02:05: Reserved [mem 0xdf000000-0xdfffffff] <6>[ 3.354793] acpi PNP0C02:05: Could not reserve [io 0x1800-0x18fe] <6>[ 3.354811] acpi PNP0C02:05: Could not reserve [mem 0xe0000000-0xe074ffff] <6>[ 3.354829] acpi PNP0C02:05: Could not reserve [mem 0xe0730000-0xe074ffff] <6>[ 3.354847] acpi PNP0C02:05: Could not reserve [mem 0xe0710000-0xefffffff] <6>[ 3.356603] acpi PNP0C02:06: Reserved [io 0x2000-0x20fe] <6>[ 3.359442] acpi PNP0C01:00: Could not reserve [mem 0x00000000-0x0009cfff] <6>[ 3.359832] pnp: PnP ACPI init <6>[ 3.406279] pnp: PnP ACPI: found 1 devices <6>[ 3.425171] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 3.425571] NET: Registered PF_INET protocol family <6>[ 3.425870] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.429264] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 3.429581] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 3.429846] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.431145] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 3.433252] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 3.433912] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.435542] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.437210] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 3.437311] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000 <6>[ 3.437329] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000 <6>[ 3.437344] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000 <6>[ 3.437413] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 3.437423] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned <6>[ 3.437432] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned <6>[ 3.437443] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned <6>[ 3.437471] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned <6>[ 3.437497] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned <6>[ 3.437523] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned <6>[ 3.437548] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned <6>[ 3.437596] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 3.437611] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 3.437623] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 3.437635] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 3.437650] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 3.437662] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff] <6>[ 3.437674] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 3.437685] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 3.437701] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 3.437709] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff] <6>[ 3.437721] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 3.437732] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 3.437749] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 3.437757] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 3.437768] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 3.437783] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 3.437820] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 3.437866] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 3.437875] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 3.437883] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 3.437892] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 3.437901] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window] <6>[ 3.437911] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] <6>[ 3.437919] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff] <6>[ 3.437927] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 3.437937] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff] <6>[ 3.437945] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 3.437953] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 3.437964] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff] <6>[ 3.437971] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 3.437979] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 3.437990] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff] <6>[ 3.437997] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff] <6>[ 3.438012] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff] <6>[ 3.439460] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 3.441778] PCI: CLS 0 bytes, default 64 <6>[ 3.441923] DMAR: No RMRR found <6>[ 3.441939] DMAR: No ATSR found <6>[ 3.441945] DMAR: dmar1: Using Queued invalidation <6>[ 3.441955] DMAR: dmar0: Using Queued invalidation <6>[ 3.441964] DMAR: dmar2: Using Queued invalidation <6>[ 3.443260] pci 0000:00:04.0: Adding to iommu group 0 <6>[ 3.443379] pci 0000:00:05.0: Adding to iommu group 1 <6>[ 3.443504] pci 0000:00:0a.0: Adding to iommu group 2 <6>[ 3.443595] pci 0000:00:0b.0: Adding to iommu group 3 <6>[ 3.448684] pci 0000:00:02.0: Adding to iommu group 4 <6>[ 3.451411] pci 0000:00:00.0: Adding to iommu group 5 <6>[ 3.451535] pci 0000:00:07.0: Adding to iommu group 6 <6>[ 3.451634] pci 0000:00:07.1: Adding to iommu group 7 <6>[ 3.451733] pci 0000:00:07.2: Adding to iommu group 8 <6>[ 3.451875] pci 0000:00:0d.0: Adding to iommu group 9 <6>[ 3.451944] pci 0000:00:0d.2: Adding to iommu group 9 <6>[ 3.452012] pci 0000:00:0d.3: Adding to iommu group 9 <6>[ 3.452116] pci 0000:00:12.0: Adding to iommu group 10 <6>[ 3.452220] pci 0000:00:13.0: Adding to iommu group 11 <6>[ 3.452333] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 3.452401] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 3.452533] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 3.452599] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 3.452664] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 3.452732] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 3.452840] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 3.452934] pci 0000:00:1c.0: Adding to iommu group 15 <6>[ 3.453081] pci 0000:00:1c.4: Adding to iommu group 16 <6>[ 3.453214] pci 0000:00:1f.0: Adding to iommu group 17 <6>[ 3.453286] pci 0000:00:1f.3: Adding to iommu group 17 <6>[ 3.453354] pci 0000:00:1f.4: Adding to iommu group 17 <6>[ 3.453425] pci 0000:00:1f.5: Adding to iommu group 17 <6>[ 3.453518] pci 0000:7f:00.0: Adding to iommu group 18 <6>[ 3.453633] pci 0000:80:00.0: Adding to iommu group 19 <6>[ 3.466623] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 3.466644] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 3.466653] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB) <6>[ 3.473206] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 3.473575] clocksource: Switched to clocksource tsc <6>[ 3.473899] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 3.483492] Initialise system trusted keyrings <5>[ 3.483591] Key type blacklist registered <6>[ 3.483952] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 3.497056] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 3.497212] ntfs3: Enabled Linux POSIX ACLs support <6>[ 3.497219] ntfs3: Read-only LZX/Xpress compression included <5>[ 3.498074] integrity: Platform Keyring initialized <5>[ 3.498107] integrity: Machine keyring initialized <6>[ 3.504564] xor: automatically using best checksumming function avx <5>[ 3.504577] Key type asymmetric registered <5>[ 3.504592] Asymmetric key parser 'x509' registered <6>[ 3.504746] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 3.505748] io scheduler mq-deadline registered <6>[ 3.507694] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.509612] pcieport 0000:00:07.0: PME: Signaling with IRQ 126 <6>[ 3.510447] pcieport 0000:00:07.0: AER: enabled with IRQ 126 <6>[ 3.511841] pcieport 0000:00:07.1: PME: Signaling with IRQ 127 <6>[ 3.512469] pcieport 0000:00:07.1: AER: enabled with IRQ 127 <6>[ 3.513847] pcieport 0000:00:07.2: PME: Signaling with IRQ 128 <6>[ 3.514421] pcieport 0000:00:07.2: AER: enabled with IRQ 128 <6>[ 3.515655] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129 <6>[ 3.516220] pcieport 0000:00:1c.0: AER: enabled with IRQ 129 <6>[ 3.517955] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130 <6>[ 3.518652] pcieport 0000:00:1c.4: AER: enabled with IRQ 130 <6>[ 3.520901] input: Lid Switch as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 3.521257] ACPI: button: Lid Switch [LID0] <6>[ 3.521556] input: Sleep Button as /devices/platform/PNP0C0E:00/input/input1 <6>[ 3.521793] ACPI: button: Sleep Button [SLPB] <6>[ 3.522438] input: Power Button as /devices/platform/PNP0C0C:00/input/input2 <6>[ 3.522571] ACPI: button: Power Button [PWRB] <6>[ 3.633171] acpi LNXTHERM:00: registered as thermal_zone0 <6>[ 3.633196] ACPI: thermal: Thermal Zone [TZ00] (41 C) <6>[ 3.634787] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 3.636809] ACPI: battery: Slot [BAT0] (battery present) <6>[ 3.638951] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 3.662169] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 3.680613] serial 0000:00:12.0: enabling device (0000 -> 0002) <5>[ 3.684383] hpet_acpi_add: no address or irqs in _CRS <6>[ 3.684749] Linux agpgart interface v0.103 <6>[ 3.685961] ACPI: bus type drm_connector registered <7>[ 3.687007] initcall simpledrm_platform_driver_init blacklisted <6>[ 3.708564] loop: module loaded <6>[ 3.773122] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 3.896864] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 4.106934] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 4.256874] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <5>[ 4.452653] Key type psk registered <6>[ 4.459517] nvme 0000:80:00.0: platform quirk: setting simple suspend <6>[ 4.461198] nvme nvme0: pci function 0000:80:00.0 <6>[ 4.501382] nvme nvme0: 8/0/0 default/read/poll queues <6>[ 4.522533] nvme0n1: p1 p2 <6>[ 4.528586] tun: Universal TUN/TAP device driver, 1.6 <6>[ 4.530977] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.531212] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 4.533858] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.537474] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.537513] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 4.537546] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.538238] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00 <6>[ 4.538274] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.538291] usb usb1: Product: xHCI Host Controller <6>[ 4.538304] usb usb1: Manufacturer: Linux 7.0.0-rc2-lgci-xe-xe-4675-fce8d7fb2107068c2-debug+ xhci-hcd <6>[ 4.538324] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 4.541341] hub 1-0:1.0: USB hub found <6>[ 4.541516] hub 1-0:1.0: 1 port detected <6>[ 4.548919] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00 <6>[ 4.548943] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.548961] usb usb2: Product: xHCI Host Controller <6>[ 4.548973] usb usb2: Manufacturer: Linux 7.0.0-rc2-lgci-xe-xe-4675-fce8d7fb2107068c2-debug+ xhci-hcd <6>[ 4.548993] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 4.551346] hub 2-0:1.0: USB hub found <6>[ 4.551567] hub 2-0:1.0: 3 ports detected <6>[ 4.602286] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.602343] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 4.604947] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.609769] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.609816] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 4.609843] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.610167] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00 <6>[ 4.610182] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.610193] usb usb3: Product: xHCI Host Controller <6>[ 4.610201] usb usb3: Manufacturer: Linux 7.0.0-rc2-lgci-xe-xe-4675-fce8d7fb2107068c2-debug+ xhci-hcd <6>[ 4.610215] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 4.611349] hub 3-0:1.0: USB hub found <6>[ 4.611420] hub 3-0:1.0: 8 ports detected <6>[ 4.646779] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00 <6>[ 4.646797] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.646808] usb usb4: Product: xHCI Host Controller <6>[ 4.646816] usb usb4: Manufacturer: Linux 7.0.0-rc2-lgci-xe-xe-4675-fce8d7fb2107068c2-debug+ xhci-hcd <6>[ 4.646828] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 4.647662] hub 4-0:1.0: USB hub found <6>[ 4.647709] hub 4-0:1.0: 2 ports detected <6>[ 4.655587] usbcore: registered new interface driver usb-storage <6>[ 4.655794] usbcore: registered new interface driver usbserial_generic <6>[ 4.655891] usbserial: USB Serial support registered for generic <6>[ 4.655973] usbcore: registered new interface driver ftdi_sio <6>[ 4.656021] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 4.656101] usbcore: registered new interface driver pl2303 <6>[ 4.656150] usbserial: USB Serial support registered for pl2303 <6>[ 4.656299] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 4.656311] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 5.368625] i8042: Can't read CTR while initializing i8042 <3>[ 5.368641] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 5.369177] mousedev: PS/2 mouse device common for all mice <6>[ 5.370229] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 5.372142] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 5.372370] rtc_cmos rtc_cmos: setting system clock to 2026-03-08T03:26:40 UTC (1772940400) <6>[ 5.372574] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 5.372629] i2c_dev: i2c /dev entries driver <6>[ 5.378516] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 5.378530] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 5.378541] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 5.378578] device-mapper: uevent: version 1.0.3 <6>[ 5.378906] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 5.378926] intel_pstate: Intel P-state driver initializing <6>[ 5.383764] Hybrid CPU capacity scaling enabled <6>[ 5.384155] processor cpu0: EM: created perf domain <6>[ 5.384449] processor cpu1: EM: created perf domain <6>[ 5.384723] processor cpu2: EM: created perf domain <6>[ 5.385018] processor cpu3: EM: created perf domain <6>[ 5.385294] processor cpu4: EM: created perf domain <6>[ 5.385578] processor cpu5: EM: created perf domain <6>[ 5.385870] processor cpu6: EM: created perf domain <6>[ 5.386195] processor cpu7: EM: created perf domain <6>[ 5.387810] intel_pstate: HWP enabled <6>[ 5.387823] sdhci: Secure Digital Host Controller Interface driver <6>[ 5.387832] sdhci: Copyright(c) Pierre Ossman <6>[ 5.388083] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 5.392050] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c] <6>[ 5.394069] drop_monitor: Initializing network drop monitor service <6>[ 5.394403] NET: Registered PF_INET6 protocol family <6>[ 5.396131] Segment Routing with IPv6 <6>[ 5.396171] In-situ OAM (IOAM) with IPv6 <6>[ 5.396222] NET: Registered PF_PACKET protocol family <5>[ 5.396585] Key type dns_resolver registered <4>[ 5.401603] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 5.402141] microcode: Current revision: 0x00000124 <6>[ 5.402946] IPI shorthand broadcast: enabled <6>[ 5.424754] sched_clock: Marking stable (5414001067, 10000112)->(5490116829, -66115650) <6>[ 5.425925] registered taskstats version 1 <5>[ 5.427631] Loading compiled-in X.509 certificates <6>[ 5.477266] Demotion targets for Node 0: null <6>[ 5.477728] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946) <6>[ 5.477740] kmemleak: Automatic memory scanning thread started <5>[ 5.478017] Key type .fscrypt registered <5>[ 5.478022] Key type fscrypt-provisioning registered <6>[ 5.481278] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 5.484115] Key type encrypted registered <6>[ 5.484126] AppArmor: AppArmor sha256 policy hashing enabled <6>[ 5.484140] ima: No TPM chip found, activating TPM-bypass! <5>[ 5.484158] Loading compiled-in module X.509 certificates <5>[ 5.484911] Loaded X.509 cert 'Build time autogenerated kernel key: e5c55039592ca47df91c2f5f522e56c5c413978a' <6>[ 5.484927] ima: Allocated hash algorithm: sha256 <6>[ 5.484973] ima: No architecture policies found <6>[ 5.485080] evm: Initialising EVM extended attributes: <6>[ 5.485086] evm: security.selinux <6>[ 5.485090] evm: security.SMACK64 <6>[ 5.485094] evm: security.SMACK64EXEC <6>[ 5.485098] evm: security.SMACK64TRANSMUTE <6>[ 5.485102] evm: security.SMACK64MMAP <6>[ 5.485106] evm: security.apparmor <6>[ 5.485110] evm: security.ima <6>[ 5.485113] evm: security.capability <6>[ 5.485117] evm: HMAC attrs: 0x1 <6>[ 5.487380] PM: Magic number: 2:272:411 <6>[ 5.487417] event_source dmar2: hash matches <6>[ 5.487436] iommu dmar2: hash matches <6>[ 5.487643] netconsole: network logging started <6>[ 5.488282] RAS: Correctable Errors collector initialized. <6>[ 5.488726] clk: Disabling unused clocks <6>[ 5.488747] PM: genpd: Disabling unused power domains <6>[ 5.489223] md: Waiting for all devices to be available before autodetect <6>[ 5.489229] md: If you don't use raid, use raid=noautodetect <6>[ 5.489234] md: Autodetecting RAID arrays. <6>[ 5.489242] md: autorun ... <6>[ 5.489245] md: ... autorun DONE. <6>[ 5.533228] EXT4-fs (nvme0n1p2): mounted filesystem ab02bed0-b378-4950-9087-63334df65791 ro with ordered data mode. Quota mode: none. <6>[ 5.533297] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 5.534449] devtmpfs: mounted <6>[ 5.534674] VFS: Pivoted into new rootfs <6>[ 5.552592] Freeing unused decrypted memory: 2036K <6>[ 5.553457] Freeing unused kernel image (initmem) memory: 5764K <6>[ 5.553482] Write protecting the kernel read-only data: 36864k <6>[ 5.554104] Freeing unused kernel image (text/rodata gap) memory: 704K <6>[ 5.554328] Freeing unused kernel image (rodata/data gap) memory: 520K <6>[ 5.558985] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 5.566349] Run /sbin/init as init process <7>[ 5.566356] with arguments: <7>[ 5.566357] /sbin/init <7>[ 5.566358] with environment: <7>[ 5.566358] HOME=/ <7>[ 5.566359] TERM=linux <7>[ 5.613133] systemd[1]: Inserted module 'autofs4' <7>[ 5.646474] systemd[1]: systemd 255.4-1ubuntu8.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 5.646542] systemd[1]: Detected architecture x86-64. <7>[ 5.648325] systemd[1]: Hostname set to . <7>[ 5.908268] systemd[1]: Queued start job for default target graphical.target. <7>[ 5.929955] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 5.933260] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 5.936343] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 5.936735] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 5.937919] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 5.938092] systemd[1]: Expecting device dev-disk-by\x2duuid-BBB3\x2d0D61.device - /dev/disk/by-uuid/BBB3-0D61... <7>[ 5.938211] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 5.938321] systemd[1]: Reached target slices.target - Slice Units. <7>[ 5.938415] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 5.938507] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 5.938603] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 5.938918] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 5.939403] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 5.939742] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 5.940110] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 5.940402] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 5.940641] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 5.940970] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 5.941388] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 5.941674] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 5.941858] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.942156] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 5.942428] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 5.945866] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 5.948540] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 5.951333] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 5.954484] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 5.961443] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 5.964957] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 5.968167] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 5.972559] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 5.976835] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 5.983655] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 5.989460] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 5.998459] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 6.004956] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 6.007937] systemd-journald[205]: Collecting audit messages is disabled. <7>[ 6.011131] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 6.017558] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 6.017921] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <6>[ 6.019278] pstore: Using crash dump compression: deflate <7>[ 6.024995] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <7>[ 6.031995] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 6.032103] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 6.032178] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <6>[ 6.033402] pstore: Registered efi_pstore as persistent store backend <6>[ 6.033669] fuse: init (API version 7.45) <7>[ 6.038531] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <7>[ 6.043920] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 6.167069] EXT4-fs (nvme0n1p2): re-mounted ab02bed0-b378-4950-9087-63334df65791 r/w. <6>[ 6.196091] Adding 8388604k swap on /swap.img. Priority:-1 extents:65 across:341704704k SS <7>[ 6.215456] systemd-journald[205]: Received client request to flush runtime journal. <7>[ 6.231549] systemd-journald[205]: /var/log/journal/b767726c6704475694a1e926e667900b/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 6.231565] systemd-journald[205]: Rotating system journal. <4>[ 7.002584] nvme nvme0: using unchecked data buffer <6>[ 7.094819] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 7.101485] ACPI: bus type thunderbolt registered <6>[ 7.140425] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 7.164185] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v1.bin, version: Nov 13 2025*NPU40xx*ci_tag_ud202548_vpu_rc_20251112_1901-1-g72f907ffc78*72f907ffc780df5579a2fed65afc4944da8b0e44 <6>[ 7.164199] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: HW <6>[ 7.238583] input: Intel HID events as /devices/platform/INTC107B:00/input/input3 <6>[ 7.245716] intel-hid INTC107B:00: platform supports 5 button array <6>[ 7.250565] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4 <6>[ 7.260036] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <5>[ 7.323637] audit: type=1400 audit(1772940402.449:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=406 comm="apparmor_parser" <5>[ 7.324796] audit: type=1400 audit(1772940402.450:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=407 comm="apparmor_parser" <5>[ 7.325518] audit: type=1400 audit(1772940402.451:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=409 comm="apparmor_parser" <5>[ 7.325927] audit: type=1400 audit(1772940402.451:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=408 comm="apparmor_parser" <5>[ 7.327739] audit: type=1400 audit(1772940402.453:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=410 comm="apparmor_parser" <5>[ 7.333519] audit: type=1400 audit(1772940402.459:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=413 comm="apparmor_parser" <5>[ 7.333807] audit: type=1400 audit(1772940402.459:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=412 comm="apparmor_parser" <5>[ 7.334558] audit: type=1400 audit(1772940402.460:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=411 comm="apparmor_parser" <5>[ 7.337802] audit: type=1400 audit(1772940402.463:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=414 comm="apparmor_parser" <5>[ 7.340202] audit: type=1400 audit(1772940402.466:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=415 comm="apparmor_parser" <6>[ 7.366988] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402) <6>[ 7.369422] intel_rapl_common: Found RAPL domain package <6>[ 7.369429] intel_rapl_common: Found RAPL domain dram <3>[ 7.546632] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121 <3>[ 7.546796] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121 <6>[ 7.568752] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0 <6>[ 7.835637] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 7.853581] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 7.898199] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 7.943299] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 8.035491] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 8.035497] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 8.035498] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 8.035499] RAPL PMU: hw unit of domain dram 2^-14 Joules <6>[ 8.035500] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 8.151667] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 8.155118] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin <6>[ 8.179912] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 8.181029] r8169 0000:7f:00.0: enabling device (0000 -> 0003) <6>[ 8.183336] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888 <6>[ 8.183342] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716 <6>[ 8.183343] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472 <6>[ 8.185486] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.247184] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.252716] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.295523] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.309795] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c9:30:ac, XID 541, IRQ 195 <6>[ 8.309802] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] <6>[ 8.314728] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.321256] pci 0000:00:05.0: Setting to D3hot <4>[ 8.325189] block nvme0n1: No UUID available providing old NGUID <6>[ 8.353576] intel_pmc_core INT33A1:00: initialized <6>[ 8.365571] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.564012] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.704830] intel_rapl_common: Found RAPL domain package <6>[ 8.704836] intel_rapl_common: Found RAPL domain core <6>[ 8.704840] intel_rapl_common: Found RAPL domain dram <6>[ 8.704842] intel_rapl_common: Found RAPL domain psys <6>[ 8.842625] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.861810] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.973247] r8169 0000:7f:00.0 enp127s0: renamed from eth0 <6>[ 9.016869] loop0: detected capacity change from 0 to 8 <4>[ 9.127356] spi-nor spi0.0: supply vcc not found, using dummy regulator <5>[ 9.163064] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 9.163089] 0x000000000000-0x000002000000 : "BIOS" <6>[ 9.178340] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.222708] hid: raw HID events driver (C) Jiri Kosina <6>[ 9.233805] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.243708] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 9.254051] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC) <6>[ 9.292317] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.303999] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.305382] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.310111] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.313319] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.315546] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.315907] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.322587] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.322757] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 9.324834] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 9.327279] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.333300] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.336215] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.343535] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.345255] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.350349] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.350910] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.359212] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.365322] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 9.368934] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.369433] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 9.373449] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 9.374324] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.378757] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.411886] r8169 0000:7f:00.0 enp127s0: Link is Down <6>[ 9.522691] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.529727] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.535125] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.542082] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.548682] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.553252] Consider using thermal netlink events interface <6>[ 9.555426] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.560525] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.565641] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.570359] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.574365] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.577995] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.583285] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.587803] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.593445] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.597475] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.602539] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.607920] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.613047] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.617824] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.626310] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 10.631700] typec port0: bound usb3-port1 (ops connector_ops) <6>[ 10.631752] typec port0: bound usb2-port1 (ops connector_ops) <6>[ 10.631795] typec port0: bound usb4_port1 (ops connector_ops [thunderbolt]) <6>[ 11.682860] typec port1: bound usb3-port2 (ops connector_ops) <6>[ 11.682920] typec port1: bound usb2-port2 (ops connector_ops) <6>[ 11.682964] typec port1: bound usb4_port3 (ops connector_ops [thunderbolt]) <6>[ 12.977962] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off <6>[ 20.054659] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 20.058734] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 25.516245] systemd-journald[205]: /var/log/journal/b767726c6704475694a1e926e667900b/user-1000.journal: Journal file uses a different sequence number ID, rotating. <7>[ 51.481725] [IGT] xe_module_load: executing <4>[ 51.481776] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 51.490432] [IGT] xe_module_load: starting subtest load <5>[ 51.800334] Setting dangerous option force_probe - tainting kernel <6>[ 51.803725] xe 0000:00:02.0: vgaarb: deactivate vga console <7>[ 51.805055] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error <6>[ 51.805675] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7>[ 51.805691] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7>[ 51.805848] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7>[ 51.805976] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7>[ 51.808345] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7>[ 51.808501] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7>[ 51.808626] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 51.808784] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7>[ 51.808932] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7>[ 51.809037] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7>[ 51.809130] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7>[ 51.809220] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7>[ 51.809308] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7>[ 51.809413] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 51.809507] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7>[ 51.809634] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7>[ 51.809775] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7>[ 51.809907] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7>[ 51.810016] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7>[ 51.810136] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7>[ 51.810255] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7>[ 51.810372] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7>[ 51.810484] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7>[ 51.810603] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7>[ 51.810746] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 51.810886] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 51.810995] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7>[ 51.811105] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 51.811223] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 51.811339] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 51.811454] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7>[ 51.811559] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 51.811714] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 51.811851] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 51.811959] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7>[ 51.812063] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 51.812166] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 51.812270] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 51.812373] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7>[ 51.812476] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 51.812605] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 51.812743] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 51.812873] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7>[ 51.812974] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 51.813074] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 51.813172] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 51.813275] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7>[ 51.813702] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7>[ 51.813894] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7>[ 51.814027] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7>[ 51.814175] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7>[ 51.814352] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7>[ 51.814504] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7>[ 51.814670] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 850) <7>[ 51.814826] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7>[ 51.814938] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7>[ 51.815059] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7>[ 51.815172] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7>[ 51.815283] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7>[ 51.815395] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7>[ 51.815504] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7>[ 51.815659] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7>[ 51.815801] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 51.815914] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7>[ 51.816020] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7>[ 51.816128] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 51.816232] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 51.816335] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 51.816436] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7>[ 51.816549] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 51.816678] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 51.816801] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 51.816896] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 51.816993] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7>[ 51.817114] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 51.817263] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7>[ 51.817414] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 51.817803] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7>[ 51.818000] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7>[ 51.818138] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7>[ 51.818259] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 51.818368] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 51.818515] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7>[ 51.818660] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7>[ 51.818815] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 51.818927] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7>[ 51.819052] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 51.819156] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7>[ 51.819266] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 51.819363] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7>[ 51.819619] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 51.819745] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7>[ 51.820179] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7>[ 51.820674] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7>[ 51.820835] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7>[ 51.820932] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7>[ 51.821031] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7>[ 51.821119] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7>[ 51.821203] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7>[ 51.821287] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7>[ 51.821369] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7>[ 51.821462] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7>[ 51.821565] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7>[ 51.821670] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7>[ 51.821771] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7>[ 51.821849] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7>[ 51.821925] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7>[ 51.825108] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7>[ 51.825280] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 51.825453] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 51.825604] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7>[ 51.825751] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7>[ 51.825895] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7>[ 51.826087] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7>[ 51.826300] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7>[ 51.826532] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 51.826751] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7>[ 51.826775] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available. <7>[ 51.826965] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 51.827173] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7>[ 51.827377] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 51.827567] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7>[ 51.827763] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7>[ 51.827946] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7>[ 51.828127] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 51.828307] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7>[ 51.828502] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 51.828678] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7>[ 51.828853] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 51.829038] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7>[ 51.829221] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7>[ 51.829404] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7>[ 51.829577] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 51.829747] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7>[ 51.829915] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 51.830082] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7>[ 51.830244] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 51.830417] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7>[ 51.835441] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 51.835681] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7>[ 51.835895] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7>[ 51.836155] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:391:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 51.836453] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:391:DDI A/PHY A] <7>[ 51.836744] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7>[ 51.836950] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7>[ 51.837151] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7>[ 51.837414] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 51.837653] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7>[ 51.837856] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 51.838044] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7>[ 51.838188] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7>[ 51.838333] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 51.838497] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:391:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 51.838754] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 51.838895] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 51.839031] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 51.839187] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 51.839365] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 51.839673] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 51.840020] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 51.841252] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turning VDD on <7>[ 51.841590] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <6>[ 51.841905] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7>[ 51.876802] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 51.888663] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7>[ 51.912373] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7>[ 51.936089] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7>[ 51.947949] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7>[ 52.007271] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 52.351236] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 52.351248] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 52.351250] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 52.351251] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 52.351254] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 52.351256] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 52.351257] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] ELD monitor <5>[ 52.351261] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 52.351262] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] ELD size 20, SAD count 0 <5>[ 52.351265] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 52.351301] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 52.351302] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 52.351303] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 52.351315] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:392:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 52.351451] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:392:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 52.363064] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:392:eDP-1] Performing OUI wait (0 ms) <7>[ 52.374928] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:392:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 52.375052] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:392:eDP-1] AUX Backlight Control Supported! <7>[ 52.375164] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:392:eDP-1] Using VESA eDP backlight controls <7>[ 52.375276] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:392:eDP-1] DRRS type: seamless <7>[ 52.386784] xe 0000:00:02.0: [drm:drm_edp_backlight_init [drm_display_helper]] AUX A/DDI A/PHY A: Found backlight: aux_set=0 aux_enable=0 mode=2 <7>[ 52.386802] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:392:eDP-1] AUX VESA backlight enable is controlled through PWM <7>[ 52.386937] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:392:eDP-1] AUX VESA backlight level is controlled through PWM using PWM values <7>[ 52.387073] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:392:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 52.387192] xe 0000:00:02.0: [drm:intel_dp_aux_vesa_setup_backlight [xe]] [CONNECTOR:392:eDP-1] Using AUX VESA interface for backlight control <7>[ 52.387301] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:392:eDP-1] backlight initialized, disabled, brightness 192000/192000 <7>[ 52.387467] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 52.387567] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 52.387664] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 52.387767] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 52.387865] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 52.387996] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 52.388201] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:400:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 52.388367] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 52.388499] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:400:DDI TC1/PHY TC1] <7>[ 52.388880] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:412:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 52.389040] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 52.389166] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:412:DDI TC2/PHY TC2] <7>[ 52.389420] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:420:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 52.389555] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 52.389680] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:420:DDI TC3/PHY TC3] <7>[ 52.390061] xe 0000:00:02.0: [drm:intel_vga_disable [xe]] VGA plane is disabled <6>[ 52.390179] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io:owns=io+mem <7>[ 52.390598] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:150:pipe A] hw state readout: enabled <7>[ 52.390728] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:269:pipe B] hw state readout: disabled <7>[ 52.390865] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:388:pipe C] hw state readout: disabled <7>[ 52.390981] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:34:plane 1A] hw state readout: enabled, pipe A <7>[ 52.391086] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:64:plane 2A] hw state readout: disabled, pipe A <7>[ 52.391184] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 3A] hw state readout: disabled, pipe A <7>[ 52.391279] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:124:plane 4A] hw state readout: disabled, pipe A <7>[ 52.391373] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:134:plane 5A] hw state readout: disabled, pipe A <7>[ 52.391467] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:144:cursor A] hw state readout: disabled, pipe A <7>[ 52.391560] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:153:plane 1B] hw state readout: disabled, pipe B <7>[ 52.391652] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:plane 2B] hw state readout: disabled, pipe B <7>[ 52.391756] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:213:plane 3B] hw state readout: disabled, pipe B <7>[ 52.391873] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:243:plane 4B] hw state readout: disabled, pipe B <7>[ 52.391997] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:253:plane 5B] hw state readout: disabled, pipe B <7>[ 52.392097] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:263:cursor B] hw state readout: disabled, pipe B <7>[ 52.392191] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:272:plane 1C] hw state readout: disabled, pipe C <7>[ 52.392279] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:302:plane 2C] hw state readout: disabled, pipe C <7>[ 52.392365] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:332:plane 3C] hw state readout: disabled, pipe C <7>[ 52.392450] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:362:plane 4C] hw state readout: disabled, pipe C <7>[ 52.392535] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:372:plane 5C] hw state readout: disabled, pipe C <7>[ 52.392619] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:382:cursor C] hw state readout: disabled, pipe C <7>[ 52.393706] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 52.393855] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:391:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 52.393972] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 52.394064] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:400:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 52.394145] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST A] hw state readout: disabled, pipe A <7>[ 52.394226] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST B] hw state readout: disabled, pipe B <7>[ 52.394304] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:404:DP-MST C] hw state readout: disabled, pipe C <7>[ 52.394389] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 52.394474] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:412:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 52.394561] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST A] hw state readout: disabled, pipe A <7>[ 52.394645] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST B] hw state readout: disabled, pipe B <7>[ 52.394755] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:416:DP-MST C] hw state readout: disabled, pipe C <7>[ 52.394866] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 52.394975] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:420:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 52.395065] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST A] hw state readout: disabled, pipe A <7>[ 52.395151] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST B] hw state readout: disabled, pipe B <7>[ 52.395230] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:424:DP-MST C] hw state readout: disabled, pipe C <7>[ 52.396243] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving DPLL 0 <7>[ 52.396347] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 52.396449] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 52.396547] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 52.396655] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 52.396771] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 52.396896] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 52.397009] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 52.397125] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:392:eDP-1] hw state readout: enabled <7>[ 52.397231] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:401:DP-1] hw state readout: disabled <7>[ 52.397334] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:413:DP-2] hw state readout: disabled <7>[ 52.397432] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:421:DP-3] hw state readout: disabled <7>[ 52.397592] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:34:plane 1A] min_cdclk 173855 kHz <7>[ 52.397704] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:64:plane 2A] min_cdclk 0 kHz <7>[ 52.397813] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 3A] min_cdclk 0 kHz <7>[ 52.397921] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:124:plane 4A] min_cdclk 0 kHz <7>[ 52.398018] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:134:plane 5A] min_cdclk 0 kHz <7>[ 52.398101] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:144:cursor A] min_cdclk 0 kHz <7>[ 52.398183] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:150:pipe A] min_cdclk 173855 kHz <7>[ 52.398265] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:153:plane 1B] min_cdclk 0 kHz <7>[ 52.398351] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:plane 2B] min_cdclk 0 kHz <7>[ 52.398435] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:213:plane 3B] min_cdclk 0 kHz <7>[ 52.398516] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:243:plane 4B] min_cdclk 0 kHz <7>[ 52.398598] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:253:plane 5B] min_cdclk 0 kHz <7>[ 52.398702] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:263:cursor B] min_cdclk 0 kHz <7>[ 52.398804] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:269:pipe B] min_cdclk 0 kHz <7>[ 52.398908] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:272:plane 1C] min_cdclk 0 kHz <7>[ 52.399001] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:302:plane 2C] min_cdclk 0 kHz <7>[ 52.399085] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:332:plane 3C] min_cdclk 0 kHz <7>[ 52.399167] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:362:plane 4C] min_cdclk 0 kHz <7>[ 52.399243] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:372:plane 5C] min_cdclk 0 kHz <7>[ 52.399316] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:382:cursor C] min_cdclk 0 kHz <7>[ 52.399390] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:388:pipe C] min_cdclk 0 kHz <7>[ 52.399620] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:150:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 52.399724] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:269:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 52.399831] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:388:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 52.399936] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1 <7>[ 52.400050] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7>[ 52.400160] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7>[ 52.400305] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 52.400417] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A <7>[ 52.400696] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [setup_hw_state] <7>[ 52.400859] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 52.401002] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 52.401112] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 52.401218] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 52.401321] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 52.401422] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 52.401523] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64 <7>[ 52.401636] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 52.401765] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 52.401892] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 52.402001] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 52.402098] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 52.402193] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 52.402287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 52.402378] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 52.402472] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96 <7>[ 52.402566] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 52.402680] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 52.402781] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 52.402883] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 52.402984] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 52.403080] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 52.403171] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 52.403262] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 52.403351] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 52.403439] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 52.403528] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 52.403630] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 52.403734] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 52.403840] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes, <7>[ 52.403944] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 40960, rem: 0, den: 1, <7>[ 52.404040] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 52.404131] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 52.404221] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 52.404311] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 52.404400] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 52.404490] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 52.404585] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 52.404680] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 52.404775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 52.404870] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 52.404963] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 52.405051] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.405135] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.405220] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.405303] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 52.405389] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 52.405473] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.405570] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.405687] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.405809] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 52.405922] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 52.406013] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: no [setup_hw_state] <7>[ 52.406103] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:388:pipe C] enable: no [setup_hw_state] <7>[ 52.406194] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <7>[ 52.406556] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:150:pipe A][PLANE:34:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <6>[ 52.406666] xe 0000:00:02.0: [drm] Initial FB size exceeds half of stolen, discarding <7>[ 52.406667] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:34:plane 1A] on [CRTC:150:pipe A] <6>[ 52.412778] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.58.0 <7>[ 52.418964] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004551cf <7>[ 52.419094] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7>[ 52.419186] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7>[ 52.419274] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 52.419359] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cac <7>[ 52.419466] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 52.419554] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 52.419640] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 52.419724] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 52.419805] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 52.419880] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 52.419956] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 52.420028] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 52.420098] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 52.420170] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 52.420288] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7>[ 52.431345] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 52.432204] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 52.432458] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,000000df <7>[ 52.432569] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,000000df <7>[ 52.432674] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7>[ 52.432772] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7>[ 52.432849] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6>[ 53.071807] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6>[ 53.071809] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6>[ 53.071810] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7>[ 53.071969] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7>[ 53.072103] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6217]: allow rw access <7>[ 53.072222] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62af]: allow rw access <7>[ 53.072339] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 53.072455] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 53.072575] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 53.072716] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7>[ 53.072849] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7>[ 53.073008] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7>[ 53.073129] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 53.073254] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 53.073361] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 53.074409] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7>[ 53.074519] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7>[ 53.074623] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7>[ 53.074722] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7>[ 53.074819] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7>[ 53.074916] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7>[ 53.075011] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7>[ 53.075116] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7>[ 53.075209] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7>[ 53.075304] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7>[ 53.075405] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7>[ 53.075503] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7>[ 53.075596] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7>[ 53.075686] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7>[ 53.075774] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7>[ 53.075863] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7>[ 53.075954] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7>[ 53.076050] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7>[ 53.076139] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7>[ 53.076233] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7>[ 53.076325] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7>[ 53.076415] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7>[ 53.076503] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7>[ 53.076585] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7>[ 53.076665] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7>[ 53.076744] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7>[ 53.076832] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7>[ 53.076920] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7>[ 53.077008] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7>[ 53.077113] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210 <7>[ 53.077198] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8 <7>[ 53.077283] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc <7>[ 53.077367] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01 <7>[ 53.077451] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c <7>[ 53.077540] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7>[ 53.077630] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7>[ 53.077717] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7>[ 53.077802] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7>[ 53.077886] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7>[ 53.077975] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7>[ 53.078070] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7>[ 53.078156] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7>[ 53.078458] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7>[ 53.078550] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7>[ 53.078632] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7>[ 53.078713] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7>[ 53.079027] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7>[ 53.079109] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7>[ 53.079189] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7>[ 53.079268] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7>[ 53.079573] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7>[ 53.079660] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7>[ 53.079736] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7>[ 53.079810] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7>[ 53.079885] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7>[ 53.079959] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7>[ 53.080048] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7>[ 53.080542] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7>[ 53.080682] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004551cf <7>[ 53.080766] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7>[ 53.080846] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7>[ 53.080925] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 53.081014] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00001cac <7>[ 53.081094] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 53.081179] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 53.081263] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 53.081344] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 53.081421] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 53.081492] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 53.081562] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 53.081634] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 53.081706] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 53.081798] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7>[ 53.081965] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7>[ 53.083454] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0x1708000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 53.086344] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7>[ 53.103372] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 49152) <7>[ 53.114226] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 53.114641] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 53.116171] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4144 dwords <7>[ 53.116424] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7>[ 53.116629] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7>[ 53.116784] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7>[ 53.116934] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7>[ 53.117079] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7>[ 53.117219] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7>[ 53.117363] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7>[ 53.117512] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000 (MCR) <7>[ 53.122008] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7>[ 53.122222] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606 <7>[ 53.122431] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7>[ 53.125948] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7>[ 53.126170] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6>[ 53.134274] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.58.0 <7>[ 53.142024] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x017e71cf <7>[ 53.142157] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 53.142255] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7>[ 53.142361] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 53.142470] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000043d0 <7>[ 53.142579] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 53.142678] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 53.142757] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 53.142835] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 53.142912] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 53.142986] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 53.143060] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 53.143132] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 53.143204] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6>[ 53.144796] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6>[ 53.146828] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6>[ 53.147846] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7>[ 53.147967] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 53.148106] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7>[ 53.169119] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 53.169900] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 53.170268] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000,00000000 <7>[ 53.170530] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000,00000000 <7>[ 53.170783] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7>[ 53.171032] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7>[ 53.171357] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6>[ 53.171589] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6>[ 53.171593] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6>[ 53.171595] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6>[ 53.171597] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6>[ 53.171600] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6>[ 53.171602] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6>[ 53.171604] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6>[ 53.171606] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6>[ 53.171608] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6>[ 53.171610] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7>[ 53.171852] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7>[ 53.172165] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7>[ 53.172457] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7>[ 53.172751] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7>[ 53.173019] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7>[ 53.173295] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7>[ 53.173575] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7>[ 53.173808] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7>[ 53.174077] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7>[ 53.174293] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7>[ 53.174719] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7>[ 53.174909] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7>[ 53.175119] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7>[ 53.175336] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7>[ 53.175525] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7>[ 53.175697] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7>[ 53.175870] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7>[ 53.176046] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7>[ 53.176210] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7>[ 53.176393] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7>[ 53.176614] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7>[ 53.177870] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7>[ 53.178025] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7>[ 53.178168] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7>[ 53.178301] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7>[ 53.178431] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7>[ 53.178558] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7>[ 53.178679] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7>[ 53.178798] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xc50c] = 0x00010002 <7>[ 53.178917] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7>[ 53.179046] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7>[ 53.179156] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7>[ 53.179265] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7>[ 53.179379] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7>[ 53.179488] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7>[ 53.179595] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7>[ 53.179703] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7>[ 53.179810] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7>[ 53.179915] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7>[ 53.180027] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7>[ 53.180124] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7>[ 53.180215] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7>[ 53.180307] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7>[ 53.180396] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7>[ 53.180483] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7>[ 53.180567] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7>[ 53.180649] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7>[ 53.180731] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7>[ 53.180812] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7>[ 53.180891] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7>[ 53.180978] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7>[ 53.181072] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7>[ 53.181166] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7>[ 53.181264] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7>[ 53.181350] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7>[ 53.181435] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7>[ 53.181517] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7>[ 53.181599] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7>[ 53.181681] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7>[ 53.181761] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7>[ 53.181840] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7>[ 53.181919] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7>[ 53.182347] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7>[ 53.182427] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7>[ 53.182506] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7>[ 53.182584] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7>[ 53.182660] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7>[ 53.182738] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7>[ 53.182819] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7>[ 53.182899] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7>[ 53.182993] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7>[ 53.183083] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7>[ 53.183167] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7>[ 53.183250] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7>[ 53.183656] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7>[ 53.183735] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7>[ 53.183811] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7>[ 53.184354] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7>[ 53.184483] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x017e71cf <7>[ 53.184567] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 53.184648] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7>[ 53.184725] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 53.184801] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000043d0 <7>[ 53.184874] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 53.184960] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 53.185038] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 53.185114] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 53.185190] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 53.185259] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 53.185327] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 53.185393] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 53.185461] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7>[ 53.185551] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7>[ 53.185661] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7>[ 53.186923] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x2c63000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 53.209644] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 49152) <7>[ 53.230888] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 53.231534] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 53.233941] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7>[ 53.234332] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 53.238822] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7>[ 53.239207] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 53.244550] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7>[ 53.244998] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 53.288874] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7>[ 53.290369] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 53.290918] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 53.291470] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 53.292077] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 53.293413] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7>[ 53.293932] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7>[ 53.294421] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7>[ 53.296940] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 0: start 0x90008 <7>[ 53.297549] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 1: start 0x90108 <7>[ 53.298173] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 2: start 0x90208 <7>[ 53.298755] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 3: start 0x90308 <7>[ 53.299360] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 4: start 0x903c8 <7>[ 53.299930] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 0: start 0x98008 <7>[ 53.300469] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 1: start 0x98108 <7>[ 53.300991] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 2: start 0x98208 <7>[ 53.301478] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 3: start 0x98308 <7>[ 53.301977] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 4: start 0x983c8 <7>[ 53.302406] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 0: start 0x52008 <7>[ 53.302894] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 1: start 0x52108 <7>[ 53.303284] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 2: start 0x52208 <7>[ 53.303654] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 3: start 0x52308 <7>[ 53.304042] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 4: start 0x523c8 <7>[ 53.304838] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 53.305155] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 53.305454] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7>[ 53.305819] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: no [fastset] <7>[ 53.306163] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:388:pipe C] enable: no [fastset] <7>[ 53.307551] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7>[ 53.307782] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7>[ 53.325035] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe B] <7>[ 53.325788] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:388:pipe C] <7>[ 53.341477] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:392:eDP-1] adding connector to sysfs <7>[ 53.348003] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:392:eDP-1] backlight device intel_backlight registered <7>[ 53.348537] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:392:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 53.348968] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:392:eDP-1] Panel prepare <7>[ 53.349953] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 53.352111] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:392:eDP-1] generating connector hotplug event <7>[ 53.352291] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:401:DP-1] adding connector to sysfs <7>[ 53.352963] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7>[ 53.353997] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:401:DP-1] generating connector hotplug event <7>[ 53.354050] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:413:DP-2] adding connector to sysfs <7>[ 53.354564] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7>[ 53.355469] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:413:DP-2] generating connector hotplug event <7>[ 53.355520] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:421:DP-3] adding connector to sysfs <7>[ 53.355985] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 53.356857] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:421:DP-3] generating connector hotplug event <6>[ 53.356894] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7>[ 53.356925] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6>[ 53.367121] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 53.370814] input: Video Bus as /devices/pci0000:00/LNXVIDEO:00/input/input5 <7>[ 53.373205] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 53.373387] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7>[ 53.373909] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 53.373915] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 53.374991] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:34:plane 1A] no fb, skipping <7>[ 53.375141] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:269:pipe B] not active, skipping <7>[ 53.375284] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:388:pipe C] not active, skipping <7>[ 53.375403] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <6>[ 53.375469] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7>[ 53.375849] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 53.376779] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:392:eDP-1] <7>[ 53.376788] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:392:eDP-1] <7>[ 53.376784] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 53.377674] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 53.378011] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 53.378164] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 53.378315] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 53.378565] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 53.378571] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.378574] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.378575] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 53.378578] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 53.378580] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.378582] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] ELD monitor <5>[ 53.378586] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.378588] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] ELD size 20, SAD count 0 <5>[ 53.378591] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.378619] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:392:eDP-1] VRR capable: yes <7>[ 53.378788] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:392:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 53.378978] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:392:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 53.379322] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:392:eDP-1] status updated from unknown to connected <5>[ 53.379529] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.379531] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.379532] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.379592] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:392:eDP-1] probed modes: <7>[ 53.379597] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.379600] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.379604] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:401:DP-1] <7>[ 53.379607] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:401:DP-1] <7>[ 53.379791] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 53.379955] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:401:DP-1] status updated from unknown to disconnected <7>[ 53.379960] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:401:DP-1] disconnected <7>[ 53.379963] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:413:DP-2] <7>[ 53.379966] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:413:DP-2] <7>[ 53.380132] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 53.380271] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:413:DP-2] status updated from unknown to disconnected <7>[ 53.380275] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:413:DP-2] disconnected <7>[ 53.380277] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:421:DP-3] <7>[ 53.380280] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:421:DP-3] <7>[ 53.380440] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 53.380577] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:421:DP-3] status updated from unknown to disconnected <7>[ 53.380581] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:421:DP-3] disconnected <7>[ 53.380583] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:392:eDP-1] enabled? yes <7>[ 53.380586] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:401:DP-1] enabled? no <7>[ 53.380587] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:413:DP-2] enabled? no <7>[ 53.380589] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:421:DP-3] enabled? no <7>[ 53.380695] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 53.380715] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:392:eDP-1] found preferred mode: 2880x1800 <7>[ 53.380718] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 53.380887] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0) <7>[ 53.381022] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:401:DP-1] <7>[ 53.381198] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:413:DP-2] <7>[ 53.381355] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:421:DP-3] <7>[ 53.381553] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 53.381629] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7>[ 53.382123] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 53.382142] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <6>[ 53.382278] xe 0000:00:02.0: [drm] Allocating fbdev: Stolen memory not preferred. <7>[ 53.382384] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 53.382392] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 53.389845] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb <6>[ 53.390681] fbcon: xedrmfb (fb0) is primary device <7>[ 53.392490] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:392:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 53.392820] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:391:DDI A/PHY A][CRTC:150:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7>[ 53.393069] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000 <7>[ 53.393321] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 53.393565] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:391:DDI A/PHY A] [CRTC:150:pipe A] <7>[ 53.393831] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288) <7>[ 53.394071] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in dpll_hw_state <7>[ 53.394305] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7>[ 53.394536] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 53.394777] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: yes, <7>[ 53.395002] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 40960, rem: 0, den: 1, <7>[ 53.395219] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 53.395436] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 53.395650] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 53.396127] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 53.396339] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 53.396547] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 53.396766] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 53.396976] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <6>[ 53.397126] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7>[ 53.397181] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7>[ 53.397385] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 53.397587] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: no, <7>[ 53.397808] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 53.398011] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 53.398071] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7>[ 53.398223] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 53.398420] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 53.398613] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 53.398826] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 53.399019] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 53.399215] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 53.399420] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 53.399623] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000) <7>[ 53.399921] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0) <7>[ 53.400120] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7>[ 53.400316] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing DPLL 0 <7>[ 53.400569] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7>[ 53.400787] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 53.400967] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7>[ 53.401129] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7>[ 53.401330] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7>[ 53.401521] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.401698] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.401863] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.402012] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.402160] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.402324] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.402484] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.402634] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.402802] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.402943] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.403082] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.403225] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.403356] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.403494] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.403633] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.403788] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.403917] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:144:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.404058] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:144:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.404199] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:144:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.404338] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:144:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.404514] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 1390840 num active planes 1 <7>[ 53.404769] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7>[ 53.404967] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7>[ 53.405162] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 53.405343] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 53.405540] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7>[ 53.405812] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated DPLL 0 <7>[ 53.406012] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving DPLL 0 <7>[ 53.406192] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset] <7>[ 53.406375] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 53.406558] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 53.406759] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 53.406947] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 53.407124] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 53.407299] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 53.407473] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7>[ 53.407659] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 53.407828] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 53.407993] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 53.408169] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 53.408352] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 53.408514] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 53.408695] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7>[ 53.408860] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7>[ 53.409021] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7>[ 53.409181] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7>[ 53.409368] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7>[ 53.409547] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7>[ 53.409749] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 53.409906] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 53.410062] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7>[ 53.410233] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 53.410395] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 53.410547] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.410714] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.410863] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 53.411020] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.411170] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 53.411323] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 53.411475] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 53.411640] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 53.411786] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 53.411922] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 53.412057] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 53.412195] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no, <7>[ 53.412327] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 53.412482] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 53.412668] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 53.412826] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 53.412982] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 53.413140] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 53.413288] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 53.413423] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 53.413561] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 53.413694] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 53.413827] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 53.413957] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.414087] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.414217] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.414344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 53.414473] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 53.414621] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.414744] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.414868] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.414992] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 53.415102] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 53.415218] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:393] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 53.415342] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 53.415461] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 53.415590] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7>[ 53.415706] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7>[ 53.415820] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7>[ 53.415925] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7>[ 53.416029] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7>[ 53.420880] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7>[ 53.425863] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7>[ 53.426007] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7>[ 53.428703] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 53.428916] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 53.429063] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 53.429197] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 53.429326] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 53.429462] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 53.429586] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 53.429703] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 53.429818] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 53.429930] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 53.430039] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 53.430165] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 53.430283] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 53.430406] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 53.430521] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 53.430631] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 53.430742] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 53.430851] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 53.430959] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 53.431068] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 53.431175] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 53.431281] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 53.431433] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 53.431548] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 53.431659] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 53.431769] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 53.431881] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 53.431990] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 53.432098] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 53.432204] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 53.432309] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 53.432421] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 53.432533] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 53.432639] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 53.432743] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 53.432848] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <6>[ 53.438997] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 53.443541] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 53.444170] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 53.444894] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 53.631606] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:392:eDP-1] set backlight PWM = 0 <7>[ 53.633090] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7>[ 53.643716] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turn panel power off <7>[ 53.644205] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 53.644281] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 53.644773] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - short <7>[ 53.644776] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 53.696168] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 53.696845] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 53.696894] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:391:DDI A/PHY A] <7>[ 53.697004] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:150:pipe A] <7>[ 53.697169] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - short <7>[ 53.697486] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:391:DDI A/PHY A] <7>[ 53.698474] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7>[ 53.699087] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7>[ 53.700296] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x1341b072) <7>[ 53.700805] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:391:DDI A/PHY A] <7>[ 53.701366] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:400:DDI TC1/PHY TC1] <7>[ 53.701841] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST A] <7>[ 53.702326] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST B] <7>[ 53.702775] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST C] <7>[ 53.703241] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:412:DDI TC2/PHY TC2] <7>[ 53.703662] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST A] <7>[ 53.704081] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST B] <7>[ 53.704481] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST C] <7>[ 53.704935] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:420:DDI TC3/PHY TC3] <7>[ 53.705362] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST A] <7>[ 53.705808] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST B] <7>[ 53.706273] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST C] <7>[ 53.706828] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 53.708654] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:150:pipe A] <7>[ 53.709237] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7>[ 53.711742] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turn panel power on <7>[ 53.712149] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 wait for panel power cycle (485 ms remaining) <7>[ 53.730512] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 53.730824] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - long <7>[ 53.731096] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 53.731366] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:391:DDI A/PHY A] <7>[ 53.830562] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7>[ 54.202085] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 54.281514] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 54.281938] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 54.282407] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 54.318082] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 54.318603] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - long <7>[ 54.319012] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 54.319367] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:391:DDI A/PHY A] <7>[ 54.408818] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.408877] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.408969] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.488443] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 54.488928] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turning VDD on <7>[ 54.489421] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 54.492586] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 54.494120] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 54.495203] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7>[ 54.496583] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 54.498099] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 54.499366] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 54.499894] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7>[ 54.501711] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 54.502373] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7>[ 54.503436] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7>[ 54.504197] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7>[ 54.504820] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7>[ 54.505426] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:392:eDP-1] set backlight PWM = 192000 <7>[ 54.521248] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7>[ 54.523663] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:392:eDP-1] <7>[ 54.524334] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A] <7>[ 54.526382] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 54.528374] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <6>[ 54.530324] Console: switching to colour frame buffer device 180x56 <7>[ 54.530146] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=192000/192000 <7>[ 54.531003] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:392:eDP-1] set backlight level = 192000 <7>[ 54.531461] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:392:eDP-1] set backlight PWM = 192000 <6>[ 54.543997] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7>[ 54.544029] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7>[ 54.544298] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7>[ 54.544527] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7>[ 54.544739] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7>[ 54.545285] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7>[ 54.545471] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7>[ 54.545646] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7>[ 54.545823] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7>[ 54.546013] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7>[ 54.546174] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7>[ 54.546324] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7>[ 54.546469] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7>[ 54.546606] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7>[ 54.546739] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7>[ 54.546878] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7>[ 54.547009] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7>[ 54.547133] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7>[ 54.547251] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7>[ 54.547368] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7>[ 54.547481] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7>[ 54.547591] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7>[ 54.547697] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7>[ 54.548179] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7>[ 54.548289] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7>[ 54.548407] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7>[ 54.548519] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x80000000) <7>[ 54.548645] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7>[ 54.548752] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xa0000000) <7>[ 54.548941] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7>[ 54.549076] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa8000000) <7>[ 54.549227] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 54.551598] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7>[ 54.572985] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 54.573015] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 54.573557] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:392:eDP-1] <7>[ 54.573578] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:392:eDP-1] <7>[ 54.574375] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 54.574859] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 54.575109] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 54.575690] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 54.576310] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 54.576321] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.576325] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.576326] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 54.576331] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 54.576335] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.576338] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] ELD monitor <5>[ 54.576350] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.576352] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:392:eDP-1] ELD size 20, SAD count 0 <5>[ 54.576357] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.576396] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:392:eDP-1] VRR capable: yes <7>[ 54.576605] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:392:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 54.576792] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:392:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5>[ 54.577271] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.577274] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.577276] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.577379] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:392:eDP-1] probed modes: <7>[ 54.577392] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.577397] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.577403] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:401:DP-1] <7>[ 54.577407] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:401:DP-1] <7>[ 54.577652] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 54.577853] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 54.578027] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 54.578230] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.578387] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:401:DP-1] disconnected <7>[ 54.578392] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:413:DP-2] <7>[ 54.578395] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:413:DP-2] <7>[ 54.578579] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.578711] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:413:DP-2] disconnected <7>[ 54.578715] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:421:DP-3] <7>[ 54.578718] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:421:DP-3] <7>[ 54.578882] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.579008] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:421:DP-3] disconnected <7>[ 54.579011] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:392:eDP-1] enabled? yes <7>[ 54.579014] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:401:DP-1] enabled? no <7>[ 54.579017] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:413:DP-2] enabled? no <7>[ 54.579019] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:421:DP-3] enabled? no <7>[ 54.579135] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 54.579156] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:392:eDP-1] found preferred mode: 2880x1800 <7>[ 54.579158] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 54.579199] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0) <7>[ 54.580766] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 54.580922] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 54.588294] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 54.605356] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 54.605997] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 54.607524] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 54.625822] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 54.627539] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 54.638721] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 54.639115] [IGT] xe_module_load: finished subtest load, SUCCESS <7>[ 54.639700] [IGT] xe_module_load: exiting, ret=0 <7>[ 54.673622] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 54.674259] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 54.674767] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 55.614573] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.614711] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.614851] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 57.077837] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turning VDD off <7>[ 57.078303] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067