igt@xe_pm@d3hot-multiple-execs on shard-bmg@xe-4573-7ee0795cb4f30c9ccc2b8a580faebcefbdf150c5 Test details

Detail	Value
Duration	4.35 seconds
Hostname	shard-bmg-10
Igt-Version	IGT-Version: 2.3-g30ecfbf68 (x86_64) (Linux: 6.19.0-lgci-xe-xe-4573-7ee0795cb4f30c9cc-debug+ x86_64)
Out	Using IGT_SRANDOM=1771434602 for randomisation Opened device: /dev/dri/card0 Starting subtest: d3hot-multiple-execs Subtest d3hot-multiple-execs: SUCCESS (4.346s)
Err	Starting subtest: d3hot-multiple-execs Subtest d3hot-multiple-execs: SUCCESS (4.346s)
Dmesg	<6> [491.688081] Console: switching to colour dummy device 80x25 <6> [491.688340] [IGT] xe_pm: executing <6> [491.763565] [IGT] xe_pm: starting subtest d3hot-multiple-execs <7> [491.765408] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [491.765538] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [491.765647] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [491.765767] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A] <7> [491.765880] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [491.765983] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [491.766082] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2 <7> [491.766215] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [491.766297] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2 <7> [491.766383] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2 <7> [491.766569] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [491.766672] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [491.766784] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [491.766889] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A] <7> [491.766992] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [491.767093] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [491.767191] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2 <7> [491.767301] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [491.767380] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2 <7> [491.767462] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2 <7> [491.767613] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [491.767715] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [491.767811] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [491.767913] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A] <7> [491.768017] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [491.768118] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [491.768218] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2 <7> [491.768327] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [491.768405] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2 <7> [491.768487] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2 <7> [491.768589] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0 <7> [491.768662] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0 <7> [491.768745] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [491.768818] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [491.768896] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [491.768971] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [491.769044] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 1989) -> ( 0 - 4037), size 1989 -> 4037 <7> [491.769116] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb (1989 - 2048) -> (4037 - 4096), size 59 -> 59 <7> [491.769198] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0 <7> [491.769303] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000 <7> [491.769405] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000 <7> [491.769503] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624 <7> [491.769613] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz <7> [491.769738] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated TC PLL 2 <7> [491.769837] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving TC PLL 2 <7> [491.769933] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset] <7> [491.770035] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [491.770133] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [491.770231] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [491.770326] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [491.770424] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [491.770525] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [491.770622] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 <7> [491.770724] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [491.770821] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [491.770916] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [491.771012] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [491.771105] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [491.771197] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [491.771292] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00 <7> [491.771386] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11 <7> [491.771480] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00 <7> [491.771574] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [491.771666] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [491.771766] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36 <7> [491.771860] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125 <7> [491.771954] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [491.772047] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [491.772142] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [491.772235] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [491.772330] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [491.772423] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [491.772520] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [491.772613] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [491.772709] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [491.772803] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [491.772895] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [491.772990] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [491.773084] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [491.773176] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000 <7> [491.773270] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [491.773363] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c <7> [491.773455] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110 <7> [491.773548] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c <7> [491.773640] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1 <7> [491.773743] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a <7> [491.773841] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81 <7> [491.773932] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000 <7> [491.774023] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001 <7> [491.774116] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000 <7> [491.774207] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [491.774300] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000 <7> [491.774392] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00 <7> [491.774485] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x40000000 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [491.774577] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [491.774669] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [491.774770] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0db0 0x0000 0x0000 <7> [491.774863] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0db0 0x0000 <7> [491.774954] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0db0 <7> [491.775048] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0100 0x0100 0x0100 <7> [491.775141] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [491.775239] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [491.775335] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [491.775429] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [491.775522] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [491.775613] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [491.775711] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [491.775808] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [491.775902] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7> [491.775999] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7> [491.776091] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7> [491.776184] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7> [491.776278] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7> [491.776773] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G] Disable audio codec on [CRTC:150:pipe A] <7> [491.797605] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [491.818497] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [491.820935] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:150:pipe A] <7> [491.823047] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2 <7> [491.823545] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F] <7> [491.823769] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A] <7> [491.823964] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B] <7> [491.824151] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C] <7> [491.824334] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D] <7> [491.824519] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G] <7> [491.824700] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A] <7> [491.824872] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B] <7> [491.825042] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C] <7> [491.825213] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D] <7> [491.825381] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H] <7> [491.825545] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I] <7> [491.825710] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A] <7> [491.825871] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B] <7> [491.826025] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C] <7> [491.826178] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D] <7> [491.828103] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: B) <7> [491.828451] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [491.834597] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [491.834926] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000) <7> [491.835221] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:526:DP-2] <7> [491.835488] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A] <7> [491.836278] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [491.836552] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [491.836846] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B] <7> [491.837118] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [491.837379] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [491.837635] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3 <7> [491.837959] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [491.838154] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0 <7> [491.838373] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0 <7> [491.838550] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb (4037 - 4096) -> ( 0 - 0), size 59 -> 0 <7> [491.838729] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [491.838887] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [491.839037] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [491.839184] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [491.839357] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [491.839580] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000 <7> [491.839796] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000 <7> [491.839998] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0 <7> [491.840210] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz <7> [491.840430] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated TC PLL 3 <7> [491.840614] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving TC PLL 3 <7> [491.840797] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset] <7> [491.840978] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [491.841156] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0 <7> [491.841328] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [491.841496] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [491.841670] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [491.841841] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [491.841993] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [491.842141] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [491.842284] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [491.842286] xe 0000:03:00.0: colorspace: RGB <7> [491.842288] xe 0000:03:00.0: scan mode: Underscan <7> [491.842290] xe 0000:03:00.0: colorimetry: No Data <7> [491.842291] xe 0000:03:00.0: picture aspect: 16:9 <7> [491.842293] xe 0000:03:00.0: active aspect: Same as Picture <7> [491.842294] xe 0000:03:00.0: itc: No Data <7> [491.842295] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [491.842297] xe 0000:03:00.0: quantization range: Limited <7> [491.842298] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [491.842300] xe 0000:03:00.0: video code: 16 <7> [491.842301] xe 0000:03:00.0: ycc quantization range: Limited <7> [491.842303] xe 0000:03:00.0: hdmi content type: Graphics <7> [491.842304] xe 0000:03:00.0: pixel repeat: 0 <7> [491.842306] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [491.842308] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [491.842309] xe 0000:03:00.0: vendor: Intel <7> [491.842311] xe 0000:03:00.0: product: Discrete gfx <7> [491.842313] xe 0000:03:00.0: source device information: PC General (0x9) <7> [491.842314] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [491.842316] xe 0000:03:00.0: empty frame <7> [491.842318] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00 <7> [491.842460] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51 <7> [491.842605] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00 <7> [491.842755] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [491.842927] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [491.843065] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36 <7> [491.843198] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [491.843328] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [491.843459] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [491.843588] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [491.843716] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [491.843841] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [491.843960] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [491.844079] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [491.844194] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [491.844310] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [491.844426] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [491.844541] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [491.844658] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [491.844776] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [491.844884] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [491.844992] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [491.845097] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8 <7> [491.845199] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [491.845306] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06 <7> [491.845409] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [491.845512] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [491.845612] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [491.845717] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [491.845817] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [491.845916] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400 <7> [491.846014] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [491.846113] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [491.846211] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [491.846309] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x40000000 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [491.846407] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [491.846505] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [491.846603] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0db0 0x0000 0x0000 <7> [491.846704] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0db0 0x0000 <7> [491.846801] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0db0 <7> [491.846900] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0100 0x0100 0x0100 <7> [491.846998] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [491.847096] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [491.847194] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [491.847293] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [491.847391] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [491.847488] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [491.847587] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [491.847690] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [491.847788] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no <7> [491.847885] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no <7> [491.847983] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no <7> [491.848082] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no <7> [491.848179] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no <7> [491.848856] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:538:HDMI-A-3][ENCODER:537:DDI TC3/PHY H] Disable audio codec on [CRTC:268:pipe B] <7> [491.868159] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe B <7> [491.888839] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x2, on? 1) for [CRTC:268:pipe B] <7> [491.891407] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3 <7> [491.892314] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F] <7> [491.892868] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A] <7> [491.893351] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B] <7> [491.893844] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C] <7> [491.894324] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D] <7> [491.894851] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G] <7> [491.895319] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A] <7> [491.895789] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B] <7> [491.896237] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C] <7> [491.896650] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D] <7> [491.897091] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H] <7> [491.897488] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I] <7> [491.897866] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A] <7> [491.898239] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B] <7> [491.898601] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C] <7> [491.898964] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D] <7> [491.899532] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [491.900091] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [491.900576] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [491.901397] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [491.901718] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xaa000000) <7> [491.902021] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [491.902309] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:538:HDMI-A-3] <7> [491.902583] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <7> [491.926782] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [491.927718] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [491.928479] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [491.929232] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [491.929976] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [492.162301] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [492.162501] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [492.166658] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [492.171155] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [492.171585] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [492.172283] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [492.172990] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [492.176552] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [492.184768] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [492.185765] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [492.187057] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000 <7> [492.190646] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [492.191840] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [492.200673] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [492.200774] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [492.200869] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [492.207055] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.208993] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.210974] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.213003] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.214987] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.216991] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.219041] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.221031] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.224883] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.226925] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.228856] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.230881] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.232876] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.234931] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.236935] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.238876] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.240673] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [492.240686] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [492.240691] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [492.240696] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [492.240701] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [492.240705] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [492.240711] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [492.240717] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [492.240723] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [492.240752] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [492.240966] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [492.242626] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [492.242809] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [492.245633] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [492.246149] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [492.246244] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [492.246686] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [492.246775] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [492.246779] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [492.246865] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [492.248220] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [492.248223] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [492.248323] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [492.273533] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [492.273537] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [492.273540] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [492.273542] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48. <7> [492.273544] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [492.273547] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [492.273549] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV <7> [492.273552] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [492.273555] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3 <7> [492.273928] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [492.274014] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [492.274450] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [492.274553] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [492.274566] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [492.278859] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [492.350794] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [492.351871] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [492.352709] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [492.353508] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [492.354314] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [492.406274] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [492.406919] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [492.411477] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [492.416070] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [492.416505] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [492.417143] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [492.417718] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [492.420736] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [492.428597] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [492.429552] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [492.430404] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000 <7> [492.433235] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [492.434176] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [492.441225] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [492.441325] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [492.441420] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [492.446260] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.448081] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.449958] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.451803] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.453675] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.455548] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.457378] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.459204] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.462698] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.464518] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.466379] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.468204] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.470210] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.472203] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.474031] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.476018] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.477771] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [492.477790] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [492.477798] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [492.477804] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [492.477810] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [492.477817] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [492.477826] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [492.477834] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [492.477842] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [492.477876] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [492.478148] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [492.479449] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [492.479759] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [492.482178] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [492.482694] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [492.482808] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [492.483137] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [492.483233] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [492.483238] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [492.483328] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [492.484576] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [492.484579] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [492.484668] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [492.509899] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [492.509904] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [492.509906] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [492.509908] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48. <7> [492.509910] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [492.509913] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [492.509915] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV <7> [492.509918] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [492.509921] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3 <7> [492.510173] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [492.510271] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [492.510603] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [492.510693] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [492.510706] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [492.514942] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [492.582835] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [492.583690] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [492.584373] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [492.585052] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [492.585846] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [492.643437] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [492.644143] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [492.649015] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [492.653618] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [492.654381] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [492.655105] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [492.655818] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [492.659906] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [492.670080] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [492.672005] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [492.673872] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000 <7> [492.679428] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [492.681312] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [492.693764] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [492.694023] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [492.694231] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [492.700677] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.702768] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.704854] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.706853] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.708979] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.710962] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.712917] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.714976] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.719413] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.721438] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.723459] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.725487] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.727785] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.730119] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.732077] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.734304] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.736013] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [492.736027] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [492.736036] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [492.736044] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [492.736049] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [492.736055] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [492.736063] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [492.736071] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [492.736078] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [492.736109] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [492.736400] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [492.738201] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [492.738438] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [492.741624] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [492.742191] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [492.742282] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [492.742718] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [492.742806] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [492.742810] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [492.742896] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [492.744241] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [492.744244] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [492.744335] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [492.769794] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [492.769798] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [492.769800] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [492.769802] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48. <7> [492.769804] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [492.769806] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [492.769809] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV <7> [492.769811] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [492.769814] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3 <7> [492.769966] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [492.770054] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [492.770485] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [492.770585] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [492.770597] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [492.774732] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [492.846641] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [492.847577] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [492.848438] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [492.849232] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [492.850082] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [492.888176] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [492.888862] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [492.893516] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [492.898055] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [492.898611] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [492.899257] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [492.899981] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [492.903081] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [492.912309] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [492.913938] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [492.915094] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000 <7> [492.918041] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [492.919659] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [492.932308] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [492.932806] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [492.932965] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [492.940152] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.942107] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.944066] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.946063] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.948267] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.950220] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.952161] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.954597] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.958733] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.961097] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.963565] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.965915] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.967892] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.969938] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.972394] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.974430] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.976292] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [492.976310] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [492.976318] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [492.976324] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [492.976330] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [492.976337] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [492.976345] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [492.976352] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [492.976361] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [492.976393] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [492.976753] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [492.978433] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [492.978724] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [492.981650] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [492.982227] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [492.982320] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [492.982756] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [492.982842] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [492.982846] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [492.982936] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [492.984278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [492.984281] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [492.984371] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [493.009563] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [493.009567] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [493.009569] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [493.009571] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48. <7> [493.009574] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [493.009576] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [493.009578] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV <7> [493.009581] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [493.009584] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3 <7> [493.009740] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [493.009832] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [493.010264] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [493.010352] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [493.010364] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [493.014473] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [493.086726] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [493.087678] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [493.088512] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [493.089261] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [493.090046] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [493.125625] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [493.126231] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [493.131260] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [493.136733] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [493.137275] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [493.138080] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [493.138972] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [493.143131] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [493.155934] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [493.157362] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [493.158525] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000 <7> [493.161607] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [493.162608] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [493.173968] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [493.174311] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [493.174449] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [493.182059] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.184300] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.186320] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.188349] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.190384] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.192415] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.194503] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.196797] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.201225] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.203178] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.205392] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.207397] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.209490] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.211522] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.213592] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.215796] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.217622] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [493.217641] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [493.217648] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [493.217655] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [493.217661] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [493.217667] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [493.217676] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [493.217684] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [493.217692] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [493.217727] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [493.218011] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [493.219654] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [493.219902] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [493.222821] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [493.223380] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [493.223487] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [493.223949] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [493.224036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [493.224041] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [493.224127] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [493.225483] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [493.225486] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [493.225577] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [493.250989] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [493.250993] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [493.250995] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [493.250997] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48. <7> [493.251000] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [493.251002] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [493.251005] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV <7> [493.251007] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [493.251010] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3 <7> [493.251381] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [493.251494] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [493.251957] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [493.252045] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [493.252058] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [493.256175] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [493.326797] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [493.327780] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [493.328621] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [493.329371] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [493.330194] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [493.376724] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [493.377320] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [493.381975] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [493.386519] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [493.387074] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [493.387799] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [493.388505] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [493.391750] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [493.402547] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [493.404282] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [493.405624] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000 <7> [493.411202] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [493.413102] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [493.426380] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [493.426878] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [493.427107] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [493.434345] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.436642] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.438718] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.441136] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.443078] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.445220] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.447246] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.449552] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.453788] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.455842] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.457833] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.459836] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.461811] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.463784] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.465783] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.467793] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.469601] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [493.469620] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [493.469628] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [493.469635] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [493.469641] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [493.469647] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [493.469655] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [493.469663] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [493.469671] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [493.469702] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [493.470002] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [493.471738] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [493.471987] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [493.474923] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [493.475489] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [493.475581] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [493.476021] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [493.476116] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [493.476120] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [493.476206] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [493.477558] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [493.477561] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [493.477651] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [493.502897] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [493.502900] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [493.502903] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [493.502905] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48. <7> [493.502907] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [493.502909] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [493.502911] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV <7> [493.502914] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [493.502917] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3 <7> [493.503069] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [493.503163] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [493.503594] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [493.503681] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [493.503694] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [493.507853] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [493.582715] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [493.583700] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [493.584527] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [493.585276] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [493.586071] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [493.714294] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [493.715025] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [493.719747] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [493.724519] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [493.725434] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [493.726068] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [493.727083] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [493.730866] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [493.741756] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [493.743587] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [493.745216] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000 <7> [493.750260] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [493.752154] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [493.764522] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [493.764815] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [493.765091] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [493.771538] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.773607] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.775664] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.777601] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.779649] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.781680] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.783717] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.785765] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.789846] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.791785] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.793726] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.795706] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.797711] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.799755] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.801755] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.803706] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.805514] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [493.805529] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [493.805536] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [493.805541] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [493.805546] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [493.805551] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [493.805558] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [493.805565] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [493.805571] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [493.805600] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [493.805824] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [493.807467] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [493.807680] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [493.810527] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [493.811075] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [493.811240] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [493.811684] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [493.811771] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [493.811775] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [493.811858] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [493.813204] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [493.813207] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [493.813294] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [493.838507] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [493.838511] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [493.838514] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [493.838516] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48. <7> [493.838520] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [493.838522] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [493.838525] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV <7> [493.838527] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [493.838540] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3 <7> [493.838698] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [493.838786] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [493.839214] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [493.839306] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [493.839326] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [493.843488] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [493.918636] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [493.919642] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [493.920464] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [493.921217] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [493.922029] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [493.960327] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [493.960920] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [493.965548] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [493.970131] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [493.970729] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [493.971512] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [493.972374] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [493.975757] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [493.984364] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [493.985964] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [493.987280] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000 <7> [493.990489] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [493.991459] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [493.998922] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [493.999309] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [493.999501] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [494.005313] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.007207] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.009091] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.011126] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.013198] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.015361] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.017480] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.019742] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.023628] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.025604] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.027789] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.029617] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.031758] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.033596] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.035605] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.037540] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.039224] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [494.039255] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [494.039268] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [494.039327] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [494.039339] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [494.039351] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [494.039365] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [494.039379] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [494.039395] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [494.039452] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [494.039682] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [494.041214] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [494.041667] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [494.044371] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [494.045020] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [494.045134] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [494.045480] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [494.045578] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [494.045588] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [494.045679] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [494.046926] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [494.046932] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [494.047069] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [494.072479] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [494.072483] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [494.072485] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [494.072487] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48. <7> [494.072490] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [494.072492] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [494.072494] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV <7> [494.072497] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [494.072500] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3 <7> [494.072658] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [494.072755] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [494.073083] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [494.073173] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [494.073185] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [494.077335] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [494.150612] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [494.151462] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [494.152145] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [494.152849] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [494.153549] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [494.207527] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [494.208174] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [494.212894] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [494.218179] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [494.219161] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [494.219950] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [494.220798] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [494.224447] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [494.237124] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [494.239021] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [494.240662] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000 <7> [494.245215] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [494.246337] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [494.255355] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [494.255605] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [494.255842] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [494.262150] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.264161] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.266168] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.268180] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.270181] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.272230] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.274298] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.276494] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.280636] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.282661] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.284641] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.286656] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.288662] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.290655] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.292661] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.294630] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.296366] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [494.296381] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [494.296387] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [494.296392] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [494.296397] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [494.296402] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [494.296409] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [494.296415] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [494.296421] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [494.296448] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [494.296701] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [494.298468] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [494.298667] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [494.301529] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [494.302054] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [494.302161] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [494.302608] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [494.302695] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [494.302699] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [494.302784] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [494.304136] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [494.304139] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [494.304237] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [494.329696] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [494.329700] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [494.329702] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [494.329704] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48. <7> [494.329706] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [494.329709] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [494.329711] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV <7> [494.329713] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [494.329716] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3 <7> [494.329873] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [494.329959] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [494.330390] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [494.330475] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [494.330487] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [494.334600] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [494.406433] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [494.407451] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [494.408314] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [494.409107] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [494.409937] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [494.465417] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [494.466051] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [494.470687] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [494.475230] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [494.475758] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [494.476511] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [494.477224] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [494.480636] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [494.489940] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [494.491564] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [494.492632] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000 <7> [494.495569] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [494.496635] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [494.504792] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [494.505205] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [494.505411] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [494.512111] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.513955] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.515804] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.517648] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.519497] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.521482] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.523432] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.525417] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.529442] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.531402] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.533448] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.535356] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.537481] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.539430] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.541404] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.543333] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.545276] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [494.545306] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [494.545319] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [494.545331] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [494.545342] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [494.545353] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [494.545368] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [494.545381] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [494.545395] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [494.545449] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [494.545695] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [494.547241] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [494.547699] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [494.550515] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [494.551166] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [494.551284] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [494.551663] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [494.551758] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [494.551762] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [494.551857] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [494.553103] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [494.553107] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [494.553202] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [494.578045] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [494.578049] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [494.578052] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [494.578054] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48. <7> [494.578056] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [494.578058] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [494.578061] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV <7> [494.578064] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [494.578067] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3 <7> [494.578320] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [494.578416] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [494.578745] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [494.578833] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [494.578845] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [494.583069] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [494.654477] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [494.655316] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [494.656306] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [494.657132] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [494.658082] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [494.709206] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [494.709904] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [494.714649] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [494.719259] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [494.720085] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [494.720853] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [494.721913] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [494.725178] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [494.735281] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [494.737258] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [494.738634] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000 <7> [494.742976] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [494.744893] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [494.757063] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [494.757401] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [494.757544] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [494.764519] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.766520] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.768566] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.770542] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.772512] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.774547] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.776518] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.778557] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.781208] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.782814] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.785680] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.787632] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.789638] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.791601] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.793560] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.795530] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.797558] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.799568] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [494.801316] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [494.801334] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [494.801343] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [494.801350] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [494.801357] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [494.801364] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [494.801373] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [494.801381] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [494.801389] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [494.801429] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [494.801778] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [494.803468] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [494.803754] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [494.806692] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [494.807298] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [494.807423] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [494.807896] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [494.808018] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [494.808024] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [494.808152] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [494.809539] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [494.809544] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [494.809669] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [494.834668] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [494.834673] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [494.834676] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [494.834679] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48. <7> [494.834682] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [494.834685] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [494.834689] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV <7> [494.834692] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [494.834696] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3 <7> [494.835067] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [494.835198] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [494.835673] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [494.835795] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [494.835814] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [494.839953] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [494.910386] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [494.911397] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [494.912230] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [494.912975] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [494.913768] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [494.987940] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [494.988044] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [494.992298] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [494.996846] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [494.997329] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [494.997904] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [494.998486] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [495.001784] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [495.009231] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [495.010439] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [495.012090] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000 <7> [495.015183] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [495.016172] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [495.023643] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [495.024153] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [495.024309] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [495.030664] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.032714] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.034533] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.036369] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.038220] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.040127] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.041948] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.043779] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.047624] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.049631] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.051465] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.053294] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.055288] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.057154] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.059166] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.061015] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.062631] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [495.062653] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [495.062663] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [495.062670] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [495.062677] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [495.062686] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [495.062696] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [495.062705] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [495.062715] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [495.062755] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [495.063140] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [495.064424] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [495.064731] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [495.067279] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [495.067894] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [495.067989] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [495.068324] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [495.068411] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [495.068415] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [495.068502] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [495.069744] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [495.069748] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [495.069834] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [495.094811] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [495.094815] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [495.094817] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [495.094819] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48. <7> [495.094821] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [495.094822] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [495.094825] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV <7> [495.094827] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [495.094830] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3 <7> [495.094986] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [495.095074] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [495.095404] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [495.095483] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [495.095495] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [495.099623] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [495.174440] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [495.175370] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [495.176127] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [495.176818] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [495.177538] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [495.230904] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [495.231652] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [495.236342] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [495.240963] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [495.241889] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [495.242615] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [495.243313] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [495.246837] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [495.257950] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [495.260022] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [495.261724] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000 <7> [495.267139] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [495.269020] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [495.280554] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [495.280858] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [495.281009] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [495.287773] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.289735] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.291686] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.293629] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.295630] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.297567] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.299509] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.301470] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.305467] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.307454] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.309443] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.311472] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.313452] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.315444] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.317432] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.319439] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.321211] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [495.321228] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [495.321237] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [495.321244] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [495.321251] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [495.321258] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [495.321267] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [495.321275] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [495.321283] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [495.321322] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [495.321650] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [495.323388] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [495.323645] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [495.326573] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [495.327140] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [495.327265] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [495.327738] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [495.327861] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [495.327866] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [495.327988] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [495.329383] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [495.329388] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [495.329513] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [495.354517] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [495.354522] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [495.354525] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [495.354528] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48. <7> [495.354531] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [495.354534] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [495.354538] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV <7> [495.354541] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [495.354545] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3 <7> [495.354913] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [495.355046] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [495.355522] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [495.355646] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [495.355664] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [495.360035] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [495.430232] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [495.431166] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [495.431919] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [495.432684] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [495.433421] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [495.512022] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [495.512659] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [495.517406] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [495.521910] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [495.522412] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [495.522944] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [495.523515] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [495.526835] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [495.535940] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [495.537714] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [495.539048] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000 <7> [495.542045] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [495.543068] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [495.550685] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [495.551106] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [495.551277] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [495.557200] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.559072] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.561082] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.563099] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.564947] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.567015] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.568882] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.570925] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.574974] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.577104] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.579199] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.581102] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.583054] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.585118] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.587059] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.589084] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.590960] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [495.591017] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [495.591032] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [495.591044] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [495.591057] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [495.591070] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [495.591085] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [495.591101] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [495.591117] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [495.591175] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [495.591424] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [495.592945] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [495.593446] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [495.596284] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [495.596915] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [495.597039] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [495.597380] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [495.597475] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [495.597480] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [495.597576] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [495.598827] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [495.598830] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [495.598925] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [495.624183] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [495.624187] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [495.624189] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [495.624191] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48. <7> [495.624194] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [495.624196] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [495.624199] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV <7> [495.624201] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [495.624204] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3 <7> [495.624361] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [495.624451] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [495.624774] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [495.624859] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [495.624870] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [495.629080] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [495.702298] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [495.703222] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [495.703869] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [495.704562] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [495.705182] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [495.782007] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [495.782652] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [495.789149] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [495.789708] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [495.790318] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [495.790892] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A] <7> [495.791525] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [495.792114] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [495.792664] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2 <7> [495.793392] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [495.793822] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [495.794329] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037 <7> [495.794695] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59 <7> [495.795038] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [495.795356] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 <7> [495.795669] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 <7> [495.795741] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 <7> [495.795826] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 594000 num active planes 1 <7> [495.795951] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000 <7> [495.796058] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000 <7> [495.796159] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624 <7> [495.796274] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz <7> [495.796387] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated TC PLL 2 <7> [495.796480] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving TC PLL 2 <7> [495.796573] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset] <7> [495.796673] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [495.796771] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [495.796872] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [495.796976] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [495.797078] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [495.797171] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [495.797270] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 <7> [495.797372] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [495.797474] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [495.797574] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [495.797673] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [495.797773] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [495.797873] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [495.797977] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00 <7> [495.798077] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11 <7> [495.798178] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00 <7> [495.798279] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [495.798379] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [495.798479] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36 <7> [495.798580] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125 <7> [495.798680] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [495.798781] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [495.798886] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [495.799000] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [495.799103] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [495.799207] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [495.799309] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [495.799411] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [495.799512] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [495.799613] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [495.799713] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [495.799814] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [495.799914] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [495.800021] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000 <7> [495.800121] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [495.800221] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c <7> [495.800322] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110 <7> [495.800428] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c <7> [495.800528] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1 <7> [495.800629] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a <7> [495.800729] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81 <7> [495.800827] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000 <7> [495.800929] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001 <7> [495.801040] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000 <7> [495.801139] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [495.801239] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000 <7> [495.801337] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00 <7> [495.801436] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x40000000 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [495.801535] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [495.801634] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [495.801733] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0db0 0x0000 0x0000 <7> [495.801832] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0db0 0x0000 <7> [495.801930] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0db0 <7> [495.802050] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0100 0x0100 0x0100 <7> [495.802149] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [495.802248] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [495.802348] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [495.802445] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [495.802544] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [495.802642] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [495.802741] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [495.802841] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [495.802942] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [495.803061] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7> [495.803164] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7> [495.803265] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7> [495.803366] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7> [495.803468] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7> [495.804049] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [495.804387] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [495.804870] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [495.805231] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000) <7> [495.805344] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [495.805697] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F] <7> [495.805793] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A] <7> [495.805888] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B] <7> [495.805987] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C] <7> [495.806089] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D] <7> [495.806179] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G] <7> [495.806266] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A] <7> [495.806353] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B] <7> [495.806448] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C] <7> [495.806540] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D] <7> [495.806629] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H] <7> [495.806717] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I] <7> [495.806804] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A] <7> [495.806891] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B] <7> [495.806985] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C] <7> [495.807072] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D] <7> [495.807371] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [495.807546] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [495.807837] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [495.807949] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:150:pipe A] <7> [495.808051] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2 <7> [495.810687] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [495.815841] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [495.825334] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [495.826933] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [495.827371] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a <7> [495.828870] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [495.829433] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1 <7> [495.836477] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Clock recovery OK <7> [495.836673] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3 <7> [495.843769] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful <7> [495.844094] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4 <7> [495.845492] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [495.863335] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G] Enable audio codec on [CRTC:150:pipe A], 40 bytes ELD <7> [495.880124] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:526:DP-2] <7> [495.880987] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A] <7> [495.886686] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [495.891190] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [495.894376] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [495.908774] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [495.911157] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [495.913096] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000 <7> [495.918501] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [495.920498] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [495.930081] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [495.930305] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [495.930523] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [495.938045] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.940062] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.942093] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.944115] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.946130] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.948158] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.950187] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.952215] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.956283] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.958325] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.960288] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.962325] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.964338] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.966309] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.968332] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.970334] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [495.972086] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [495.972099] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [495.972105] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [495.972109] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [495.972114] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [495.972118] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [495.972124] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [495.972130] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [495.972136] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [495.972160] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [495.972380] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [495.974110] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [495.974290] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [495.977131] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [495.977643] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [495.977738] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [495.978173] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [495.978260] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [495.978265] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [495.978349] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [495.979698] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [495.979702] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [495.979792] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [496.005505] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [496.005509] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [496.005511] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [496.005513] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48. <7> [496.005515] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [496.005518] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [496.005520] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV <7> [496.005523] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [496.005526] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3 <7> [496.005682] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [496.005769] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [496.006199] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [496.006288] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [496.006300] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [496.010415] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [496.014691] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [496.014807] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [496.014919] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B] <7> [496.015023] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [496.015124] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [496.015223] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3 <7> [496.015345] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [496.015431] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [496.015512] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [496.015641] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [496.015732] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [496.015833] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B] <7> [496.015941] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [496.016041] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [496.016145] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3 <7> [496.016283] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [496.016372] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [496.016474] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B] <7> [496.016574] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [496.016673] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [496.016770] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3 <7> [496.016878] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [496.016976] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [496.017052] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [496.017199] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [496.017291] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [496.017392] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B] <7> [496.017493] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [496.017593] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [496.017690] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3 <7> [496.017797] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [496.017879] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [496.017967] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [496.018072] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989 <7> [496.018148] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59 <7> [496.018220] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989 <7> [496.018289] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59 <7> [496.018360] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [496.018428] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 <7> [496.018497] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 <7> [496.018565] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 <7> [496.018644] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 594000 num active planes 1 <7> [496.018750] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000 <7> [496.018850] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000 <7> [496.018957] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248 <7> [496.019065] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz <7> [496.019176] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated TC PLL 3 <7> [496.019274] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving TC PLL 3 <7> [496.019369] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset] <7> [496.019471] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [496.019574] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0 <7> [496.019674] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [496.019771] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [496.019867] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [496.019976] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [496.020071] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [496.020165] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [496.020258] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [496.020259] xe 0000:03:00.0: colorspace: RGB <7> [496.020261] xe 0000:03:00.0: scan mode: Underscan <7> [496.020262] xe 0000:03:00.0: colorimetry: No Data <7> [496.020263] xe 0000:03:00.0: picture aspect: 16:9 <7> [496.020264] xe 0000:03:00.0: active aspect: Same as Picture <7> [496.020265] xe 0000:03:00.0: itc: No Data <7> [496.020266] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [496.020267] xe 0000:03:00.0: quantization range: Limited <7> [496.020268] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [496.020269] xe 0000:03:00.0: video code: 16 <7> [496.020270] xe 0000:03:00.0: ycc quantization range: Limited <7> [496.020271] xe 0000:03:00.0: hdmi content type: Graphics <7> [496.020272] xe 0000:03:00.0: pixel repeat: 0 <7> [496.020273] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [496.020275] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [496.020276] xe 0000:03:00.0: vendor: Intel <7> [496.020277] xe 0000:03:00.0: product: Discrete gfx <7> [496.020278] xe 0000:03:00.0: source device information: PC General (0x9) <7> [496.020279] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [496.020281] xe 0000:03:00.0: empty frame <7> [496.020282] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00 <7> [496.020375] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51 <7> [496.020467] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00 <7> [496.020559] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [496.020653] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [496.020746] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36 <7> [496.020840] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [496.020940] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [496.021034] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [496.021129] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [496.021223] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [496.021318] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [496.021412] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [496.021509] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [496.021608] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [496.021703] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [496.021797] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [496.021892] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [496.021999] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [496.022094] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [496.022187] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [496.022281] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [496.022374] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8 <7> [496.022468] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [496.022561] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06 <7> [496.022654] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [496.022747] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [496.022841] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [496.022941] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [496.023035] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [496.023128] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400 <7> [496.023221] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [496.023314] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [496.023407] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [496.023501] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x40000000 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [496.023593] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [496.023687] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [496.023780] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0db0 0x0000 0x0000 <7> [496.023873] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0db0 0x0000 <7> [496.023978] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0db0 <7> [496.024082] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0100 0x0100 0x0100 <7> [496.024182] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [496.024281] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [496.024379] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [496.024478] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [496.024576] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [496.024673] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [496.024768] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [496.024866] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [496.024977] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [496.025079] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no <7> [496.025177] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no <7> [496.025274] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no <7> [496.025375] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no <7> [496.025470] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no <7> [496.026354] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [496.026503] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000) <7> [496.026826] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F] <7> [496.026924] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A] <7> [496.027013] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B] <7> [496.027105] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C] <7> [496.027191] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D] <7> [496.027272] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G] <7> [496.027353] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A] <7> [496.027432] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B] <7> [496.027511] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C] <7> [496.027596] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D] <7> [496.027678] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H] <7> [496.027758] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I] <7> [496.027838] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A] <7> [496.027924] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B] <7> [496.028004] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C] <7> [496.028083] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D] <7> [496.046251] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [496.046565] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A) <7> [496.063247] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x2, on? 0) for [CRTC:268:pipe B] <7> [496.063609] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3 <7> [496.066894] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe B <7> [496.077963] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [496.085982] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:538:HDMI-A-3][ENCODER:537:DDI TC3/PHY H] Enable audio codec on [CRTC:268:pipe B], 36 bytes ELD <7> [496.102860] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000) <7> [496.103595] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N <7> [496.104608] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:538:HDMI-A-3] <7> [496.105408] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <6> [496.112053] [IGT] xe_pm: finished subtest d3hot-multiple-execs, SUCCESS <7> [496.130851] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [496.132407] [IGT] xe_pm: exiting, ret=0 <6> [496.153914] Console: switching to colour frame buffer device 240x67

<6> [491.688081] Console: switching to colour dummy device 80x25

<6> [491.763565] [IGT] xe_pm: starting subtest d3hot-multiple-execs

<7> [491.765408] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [491.765538] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [491.765647] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [491.765767] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A]

<7> [491.765880] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [491.765983] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [491.766082] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2

<7> [491.766215] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [491.766297] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2

<7> [491.766383] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2

<7> [491.766569] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [491.766672] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [491.766784] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [491.766889] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A]

<7> [491.766992] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [491.767093] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [491.767191] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2

<7> [491.767301] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [491.767380] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2

<7> [491.767462] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2

<7> [491.767613] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [491.767715] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [491.767811] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [491.767913] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A]

<7> [491.768017] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [491.768118] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [491.768218] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2

<7> [491.768327] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [491.768405] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2

<7> [491.768487] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2

<7> [491.768589] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0

<7> [491.768662] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0

<7> [491.768745] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [491.768818] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [491.768896] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [491.768971] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [491.769044] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 1989) -> ( 0 - 4037), size 1989 -> 4037

<7> [491.769116] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb (1989 - 2048) -> (4037 - 4096), size 59 -> 59

<7> [491.769198] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0

<7> [491.769303] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000

<7> [491.769405] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000

<7> [491.769503] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624

<7> [491.769613] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz

<7> [491.769738] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated TC PLL 2

<7> [491.769837] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving TC PLL 2

<7> [491.769933] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset]

<7> [491.770035] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [491.770133] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0

<7> [491.770231] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [491.770326] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [491.770424] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [491.770525] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [491.770622] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64

<7> [491.770724] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [491.770821] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [491.770916] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [491.771012] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [491.771105] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [491.771197] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [491.771292] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00

<7> [491.771386] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11

<7> [491.771480] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00

<7> [491.771574] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [491.771666] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [491.771766] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36

<7> [491.771860] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125

<7> [491.771954] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [491.772047] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [491.772142] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [491.772235] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [491.772330] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [491.772423] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [491.772520] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [491.772613] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [491.772709] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [491.772803] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [491.772895] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [491.772990] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [491.773084] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [491.773176] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000

<7> [491.773270] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [491.773363] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c

<7> [491.773455] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110

<7> [491.773548] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c

<7> [491.773640] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1

<7> [491.773743] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a

<7> [491.773841] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81

<7> [491.773932] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000

<7> [491.774023] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001

<7> [491.774116] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000

<7> [491.774207] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [491.774300] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000

<7> [491.774392] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00

<7> [491.774485] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x40000000 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [491.774577] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [491.774669] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [491.774770] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0db0 0x0000 0x0000

<7> [491.774863] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0db0 0x0000

<7> [491.774954] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0db0

<7> [491.775048] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0100 0x0100 0x0100

<7> [491.775141] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [491.775239] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [491.775335] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [491.775429] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [491.775522] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [491.775613] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [491.775711] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [491.775808] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [491.775902] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no

<7> [491.775999] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no

<7> [491.776091] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no

<7> [491.776184] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no

<7> [491.776278] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no

<7> [491.776773] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G] Disable audio codec on [CRTC:150:pipe A]

<7> [491.797605] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [491.818497] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [491.820935] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:150:pipe A]

<7> [491.823047] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2

<7> [491.823545] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F]

<7> [491.823769] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A]

<7> [491.823964] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B]

<7> [491.824151] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C]

<7> [491.824334] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D]

<7> [491.824519] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G]

<7> [491.824700] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A]

<7> [491.824872] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B]

<7> [491.825042] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C]

<7> [491.825213] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D]

<7> [491.825381] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H]

<7> [491.825545] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I]

<7> [491.825710] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A]

<7> [491.825871] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B]

<7> [491.826025] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C]

<7> [491.826178] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D]

<7> [491.828103] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: B)

<7> [491.828451] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [491.834597] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A

<7> [491.834926] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000)

<7> [491.835221] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:526:DP-2]

<7> [491.835488] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A]

<7> [491.836278] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [491.836552] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [491.836846] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B]

<7> [491.837118] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [491.837379] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [491.837635] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3

<7> [491.837959] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [491.838154] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0

<7> [491.838373] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0

<7> [491.838550] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb (4037 - 4096) -> ( 0 - 0), size 59 -> 0

<7> [491.838729] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [491.838887] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [491.839037] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [491.839184] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [491.839357] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [491.839580] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000

<7> [491.839796] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000

<7> [491.839998] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0

<7> [491.840210] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz

<7> [491.840430] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated TC PLL 3

<7> [491.840614] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving TC PLL 3

<7> [491.840797] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset]

<7> [491.840978] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [491.841156] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0

<7> [491.841328] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [491.841496] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [491.841670] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [491.841841] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [491.841993] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [491.842141] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [491.842284] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [491.842288] xe 0000:03:00.0: scan mode: Underscan

<7> [491.842290] xe 0000:03:00.0: colorimetry: No Data

<7> [491.842291] xe 0000:03:00.0: picture aspect: 16:9

<7> [491.842293] xe 0000:03:00.0: active aspect: Same as Picture

<7> [491.842295] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [491.842297] xe 0000:03:00.0: quantization range: Limited

<7> [491.842298] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [491.842301] xe 0000:03:00.0: ycc quantization range: Limited

<7> [491.842303] xe 0000:03:00.0: hdmi content type: Graphics

<7> [491.842306] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [491.842308] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [491.842311] xe 0000:03:00.0: product: Discrete gfx

<7> [491.842313] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [491.842314] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [491.842318] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00

<7> [491.842460] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51

<7> [491.842605] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00

<7> [491.842755] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [491.842927] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [491.843065] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36

<7> [491.843198] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [491.843328] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [491.843459] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [491.843588] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [491.843716] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [491.843841] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [491.843960] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [491.844079] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [491.844194] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [491.844310] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [491.844426] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [491.844541] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [491.844658] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [491.844776] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [491.844884] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [491.844992] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [491.845097] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8

<7> [491.845199] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [491.845306] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06

<7> [491.845409] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [491.845512] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [491.845612] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [491.845717] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [491.845817] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [491.845916] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400

<7> [491.846014] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [491.846113] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [491.846211] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [491.846309] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x40000000 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [491.846407] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [491.846505] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [491.846603] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0db0 0x0000 0x0000

<7> [491.846704] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0db0 0x0000

<7> [491.846801] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0db0

<7> [491.846900] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0100 0x0100 0x0100

<7> [491.846998] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [491.847096] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [491.847194] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [491.847293] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [491.847391] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [491.847488] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [491.847587] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [491.847690] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [491.847788] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no

<7> [491.847885] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no

<7> [491.847983] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no

<7> [491.848082] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no

<7> [491.848179] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no

<7> [491.848856] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:538:HDMI-A-3][ENCODER:537:DDI TC3/PHY H] Disable audio codec on [CRTC:268:pipe B]

<7> [491.868159] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe B

<7> [491.888839] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x2, on? 1) for [CRTC:268:pipe B]

<7> [491.891407] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3

<7> [491.892314] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F]

<7> [491.892868] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A]

<7> [491.893351] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B]

<7> [491.893844] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C]

<7> [491.894324] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D]

<7> [491.894851] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G]

<7> [491.895319] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A]

<7> [491.895789] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B]

<7> [491.896237] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C]

<7> [491.896650] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D]

<7> [491.897091] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H]

<7> [491.897488] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I]

<7> [491.897866] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A]

<7> [491.898239] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B]

<7> [491.898601] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C]

<7> [491.898964] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D]

<7> [491.899532] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [491.900091] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [491.900576] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [491.901397] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [491.901718] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xaa000000)

<7> [491.902021] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [491.902309] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [491.902583] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]

<7> [491.926782] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [491.927718] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [491.928479] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [491.929232] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [491.929976] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [492.162301] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [492.162501] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [492.166658] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [492.171155] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [492.171585] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [492.172283] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [492.172990] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [492.176552] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [492.184768] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [492.185765] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [492.187057] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000

<7> [492.190646] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [492.191840] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [492.200673] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [492.200774] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [492.200869] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [492.207055] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.208993] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.210974] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.213003] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.214987] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.216991] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.219041] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.221031] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.224883] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.226925] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.228856] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.230881] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.232876] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.234931] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.236935] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.238876] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.240673] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [492.240686] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [492.240691] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [492.240696] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [492.240701] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [492.240705] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [492.240711] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [492.240717] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [492.240723] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [492.240752] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [492.240966] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [492.242626] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [492.242809] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [492.245633] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [492.246149] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [492.246244] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [492.246686] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [492.246775] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [492.246779] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [492.246865] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [492.248220] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [492.248223] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [492.248323] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [492.273533] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [492.273537] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [492.273540] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [492.273542] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48.

<7> [492.273544] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [492.273547] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [492.273549] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV

<7> [492.273552] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [492.273555] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3

<7> [492.273928] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [492.274014] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [492.274450] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [492.274553] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [492.274566] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [492.278859] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [492.350794] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [492.351871] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [492.352709] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [492.353508] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [492.354314] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [492.406274] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [492.406919] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [492.411477] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [492.416070] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [492.416505] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [492.417143] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [492.417718] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [492.420736] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [492.428597] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [492.429552] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [492.430404] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000

<7> [492.433235] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [492.434176] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [492.441225] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [492.441325] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [492.441420] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [492.446260] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.448081] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.449958] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.451803] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.453675] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.455548] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.457378] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.459204] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.462698] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.464518] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.466379] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.468204] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.470210] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.472203] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.474031] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.476018] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.477771] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [492.477790] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [492.477798] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [492.477804] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [492.477810] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [492.477817] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [492.477826] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [492.477834] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [492.477842] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [492.477876] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [492.478148] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [492.479449] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [492.479759] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [492.482178] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [492.482694] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [492.482808] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [492.483137] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [492.483233] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [492.483238] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [492.483328] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [492.484576] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [492.484579] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [492.484668] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [492.509899] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [492.509904] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [492.509906] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [492.509908] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48.

<7> [492.509910] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [492.509913] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [492.509915] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV

<7> [492.509918] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [492.509921] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3

<7> [492.510173] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [492.510271] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [492.510603] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [492.510693] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [492.510706] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [492.514942] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [492.582835] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [492.583690] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [492.584373] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [492.585052] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [492.585846] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [492.643437] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [492.644143] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [492.649015] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [492.653618] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [492.654381] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [492.655105] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [492.655818] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [492.659906] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [492.670080] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [492.672005] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [492.673872] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000

<7> [492.679428] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [492.681312] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [492.693764] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [492.694023] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [492.694231] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [492.700677] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.702768] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.704854] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.706853] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.708979] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.710962] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.712917] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.714976] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.719413] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.721438] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.723459] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.725487] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.727785] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.730119] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.732077] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.734304] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.736013] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [492.736027] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [492.736036] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [492.736044] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [492.736049] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [492.736055] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [492.736063] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [492.736071] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [492.736078] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [492.736109] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [492.736400] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [492.738201] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [492.738438] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [492.741624] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [492.742191] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [492.742282] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [492.742718] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [492.742806] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [492.742810] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [492.742896] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [492.744241] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [492.744244] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [492.744335] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [492.769794] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [492.769798] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [492.769800] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [492.769802] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48.

<7> [492.769804] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [492.769806] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [492.769809] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV

<7> [492.769811] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [492.769814] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3

<7> [492.769966] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [492.770054] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [492.770485] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [492.770585] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [492.770597] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [492.774732] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [492.846641] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [492.847577] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [492.848438] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [492.849232] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [492.850082] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [492.888176] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [492.888862] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [492.893516] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [492.898055] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [492.898611] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [492.899257] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [492.899981] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [492.903081] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [492.912309] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [492.913938] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [492.915094] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000

<7> [492.918041] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [492.919659] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [492.932308] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [492.932806] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [492.932965] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [492.940152] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.942107] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.944066] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.946063] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.948267] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.950220] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.952161] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.954597] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.958733] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.961097] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.963565] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.965915] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.967892] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.969938] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.972394] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.974430] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.976292] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [492.976310] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [492.976318] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [492.976324] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [492.976330] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [492.976337] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [492.976345] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [492.976352] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [492.976361] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [492.976393] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [492.976753] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [492.978433] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [492.978724] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [492.981650] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [492.982227] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [492.982320] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [492.982756] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [492.982842] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [492.982846] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [492.982936] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [492.984278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [492.984281] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [492.984371] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [493.009563] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [493.009567] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [493.009569] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [493.009571] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48.

<7> [493.009574] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [493.009576] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [493.009578] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV

<7> [493.009581] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [493.009584] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3

<7> [493.009740] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [493.009832] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [493.010264] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [493.010352] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [493.010364] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [493.014473] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [493.086726] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [493.087678] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [493.088512] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [493.089261] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [493.090046] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [493.125625] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [493.126231] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [493.131260] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [493.136733] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [493.137275] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [493.138080] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [493.138972] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [493.143131] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [493.155934] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [493.157362] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [493.158525] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000

<7> [493.161607] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [493.162608] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [493.173968] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [493.174311] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [493.174449] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [493.182059] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.184300] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.186320] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.188349] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.190384] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.192415] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.194503] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.196797] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.201225] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.203178] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.205392] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.207397] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.209490] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.211522] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.213592] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.215796] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.217622] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [493.217641] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [493.217648] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [493.217655] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [493.217661] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [493.217667] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [493.217676] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [493.217684] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [493.217692] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [493.217727] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [493.218011] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [493.219654] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [493.219902] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [493.222821] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [493.223380] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [493.223487] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [493.223949] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [493.224036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [493.224041] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [493.224127] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [493.225483] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [493.225486] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [493.225577] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [493.250989] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [493.250993] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [493.250995] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [493.250997] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48.

<7> [493.251000] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [493.251002] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [493.251005] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV

<7> [493.251007] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [493.251010] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3

<7> [493.251381] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [493.251494] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [493.251957] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [493.252045] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [493.252058] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [493.256175] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [493.326797] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [493.327780] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [493.328621] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [493.329371] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [493.330194] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [493.376724] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [493.377320] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [493.381975] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [493.386519] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [493.387074] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [493.387799] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [493.388505] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [493.391750] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [493.402547] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [493.404282] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [493.405624] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000

<7> [493.411202] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [493.413102] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [493.426380] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [493.426878] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [493.427107] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [493.434345] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.436642] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.438718] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.441136] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.443078] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.445220] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.447246] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.449552] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.453788] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.455842] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.457833] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.459836] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.461811] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.463784] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.465783] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.467793] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.469601] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [493.469620] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [493.469628] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [493.469635] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [493.469641] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [493.469647] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [493.469655] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [493.469663] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [493.469671] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [493.469702] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [493.470002] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [493.471738] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [493.471987] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [493.474923] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [493.475489] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [493.475581] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [493.476021] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [493.476116] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [493.476120] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [493.476206] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [493.477558] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [493.477561] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [493.477651] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [493.502897] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [493.502900] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [493.502903] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [493.502905] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48.

<7> [493.502907] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [493.502909] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [493.502911] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV

<7> [493.502914] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [493.502917] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3

<7> [493.503069] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [493.503163] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [493.503594] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [493.503681] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [493.503694] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [493.507853] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [493.582715] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [493.583700] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [493.584527] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [493.585276] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [493.586071] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [493.714294] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [493.715025] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [493.719747] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [493.724519] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [493.725434] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [493.726068] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [493.727083] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [493.730866] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [493.741756] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [493.743587] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [493.745216] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000

<7> [493.750260] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [493.752154] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [493.764522] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [493.764815] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [493.765091] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [493.771538] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.773607] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.775664] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.777601] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.779649] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.781680] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.783717] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.785765] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.789846] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.791785] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.793726] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.795706] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.797711] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.799755] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.801755] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.803706] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.805514] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [493.805529] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [493.805536] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [493.805541] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [493.805546] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [493.805551] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [493.805558] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [493.805565] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [493.805571] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [493.805600] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [493.805824] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [493.807467] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [493.807680] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [493.810527] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [493.811075] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [493.811240] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [493.811684] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [493.811771] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [493.811775] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [493.811858] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [493.813204] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [493.813207] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [493.813294] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [493.838507] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [493.838511] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [493.838514] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [493.838516] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48.

<7> [493.838520] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [493.838522] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [493.838525] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV

<7> [493.838527] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [493.838540] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3

<7> [493.838698] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [493.838786] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [493.839214] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [493.839306] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [493.839326] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [493.843488] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [493.918636] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [493.919642] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [493.920464] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [493.921217] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [493.922029] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [493.960327] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [493.960920] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [493.965548] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [493.970131] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [493.970729] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [493.971512] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [493.972374] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [493.975757] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [493.984364] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [493.985964] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [493.987280] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000

<7> [493.990489] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [493.991459] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [493.998922] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [493.999309] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [493.999501] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [494.005313] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.007207] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.009091] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.011126] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.013198] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.015361] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.017480] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.019742] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.023628] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.025604] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.027789] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.029617] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.031758] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.033596] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.035605] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.037540] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.039224] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [494.039255] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [494.039268] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [494.039327] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [494.039339] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [494.039351] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [494.039365] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [494.039379] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [494.039395] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [494.039452] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [494.039682] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [494.041214] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [494.041667] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [494.044371] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [494.045020] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [494.045134] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [494.045480] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [494.045578] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [494.045588] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [494.045679] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [494.046926] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [494.046932] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [494.047069] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [494.072479] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [494.072483] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [494.072485] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [494.072487] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48.

<7> [494.072490] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [494.072492] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [494.072494] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV

<7> [494.072497] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [494.072500] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3

<7> [494.072658] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [494.072755] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [494.073083] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [494.073173] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [494.073185] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [494.077335] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [494.150612] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [494.151462] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [494.152145] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [494.152849] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [494.153549] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [494.207527] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [494.208174] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [494.212894] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [494.218179] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [494.219161] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [494.219950] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [494.220798] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [494.224447] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [494.237124] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [494.239021] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [494.240662] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000

<7> [494.245215] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [494.246337] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [494.255355] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [494.255605] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [494.255842] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [494.262150] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.264161] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.266168] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.268180] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.270181] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.272230] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.274298] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.276494] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.280636] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.282661] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.284641] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.286656] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.288662] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.290655] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.292661] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.294630] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.296366] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [494.296381] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [494.296387] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [494.296392] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [494.296397] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [494.296402] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [494.296409] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [494.296415] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [494.296421] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [494.296448] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [494.296701] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [494.298468] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [494.298667] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [494.301529] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [494.302054] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [494.302161] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [494.302608] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [494.302695] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [494.302699] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [494.302784] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [494.304136] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [494.304139] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [494.304237] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [494.329696] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [494.329700] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [494.329702] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [494.329704] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48.

<7> [494.329706] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [494.329709] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [494.329711] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV

<7> [494.329713] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [494.329716] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3

<7> [494.329873] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [494.329959] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [494.330390] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [494.330475] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [494.330487] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [494.334600] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [494.406433] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [494.407451] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [494.408314] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [494.409107] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [494.409937] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [494.465417] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [494.466051] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [494.470687] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [494.475230] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [494.475758] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [494.476511] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [494.477224] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [494.480636] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [494.489940] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [494.491564] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [494.492632] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000

<7> [494.495569] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [494.496635] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [494.504792] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [494.505205] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [494.505411] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [494.512111] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.513955] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.515804] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.517648] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.519497] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.521482] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.523432] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.525417] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.529442] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.531402] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.533448] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.535356] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.537481] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.539430] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.541404] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.543333] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.545276] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [494.545306] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [494.545319] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [494.545331] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [494.545342] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [494.545353] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [494.545368] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [494.545381] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [494.545395] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [494.545449] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [494.545695] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [494.547241] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [494.547699] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [494.550515] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [494.551166] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [494.551284] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [494.551663] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [494.551758] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [494.551762] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [494.551857] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [494.553103] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [494.553107] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [494.553202] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [494.578045] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [494.578049] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [494.578052] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [494.578054] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48.

<7> [494.578056] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [494.578058] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [494.578061] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV

<7> [494.578064] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [494.578067] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3

<7> [494.578320] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [494.578416] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [494.578745] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [494.578833] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [494.578845] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [494.583069] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [494.654477] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [494.655316] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [494.656306] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [494.657132] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [494.658082] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [494.709206] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [494.709904] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [494.714649] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [494.719259] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [494.720085] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [494.720853] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [494.721913] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [494.725178] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [494.735281] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [494.737258] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [494.738634] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000

<7> [494.742976] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [494.744893] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [494.757063] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [494.757401] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [494.757544] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [494.764519] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.766520] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.768566] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.770542] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.772512] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.774547] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.776518] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.778557] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.781208] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.782814] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.785680] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.787632] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.789638] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.791601] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.793560] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.795530] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.797558] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.799568] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [494.801316] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [494.801334] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [494.801343] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [494.801350] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [494.801357] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [494.801364] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [494.801373] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [494.801381] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [494.801389] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [494.801429] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [494.801778] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [494.803468] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [494.803754] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [494.806692] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [494.807298] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [494.807423] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [494.807896] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [494.808018] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [494.808024] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [494.808152] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [494.809539] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [494.809544] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [494.809669] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [494.834668] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [494.834673] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [494.834676] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [494.834679] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48.

<7> [494.834682] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [494.834685] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [494.834689] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV

<7> [494.834692] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [494.834696] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3

<7> [494.835067] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [494.835198] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [494.835673] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [494.835795] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [494.835814] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [494.839953] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [494.910386] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [494.911397] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [494.912230] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [494.912975] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [494.913768] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [494.987940] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [494.988044] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [494.992298] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [494.996846] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [494.997329] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [494.997904] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [494.998486] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [495.001784] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [495.009231] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [495.010439] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [495.012090] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000

<7> [495.015183] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [495.016172] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [495.023643] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [495.024153] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [495.024309] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [495.030664] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.032714] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.034533] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.036369] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.038220] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.040127] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.041948] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.043779] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.047624] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.049631] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.051465] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.053294] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.055288] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.057154] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.059166] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.061015] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.062631] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [495.062653] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [495.062663] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [495.062670] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [495.062677] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [495.062686] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [495.062696] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [495.062705] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [495.062715] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [495.062755] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [495.063140] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [495.064424] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [495.064731] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [495.067279] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [495.067894] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [495.067989] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [495.068324] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [495.068411] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [495.068415] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [495.068502] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [495.069744] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [495.069748] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [495.069834] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [495.094811] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [495.094815] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [495.094817] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [495.094819] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48.

<7> [495.094821] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [495.094822] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [495.094825] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV

<7> [495.094827] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [495.094830] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3

<7> [495.094986] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [495.095074] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [495.095404] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [495.095483] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [495.095495] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [495.099623] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [495.174440] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [495.175370] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [495.176127] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [495.176818] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [495.177538] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [495.230904] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [495.231652] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [495.236342] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [495.240963] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [495.241889] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [495.242615] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [495.243313] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [495.246837] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [495.257950] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [495.260022] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [495.261724] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000

<7> [495.267139] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [495.269020] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [495.280554] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [495.280858] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [495.281009] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [495.287773] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.289735] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.291686] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.293629] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.295630] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.297567] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.299509] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.301470] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.305467] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.307454] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.309443] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.311472] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.313452] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.315444] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.317432] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.319439] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.321211] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [495.321228] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [495.321237] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [495.321244] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [495.321251] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [495.321258] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [495.321267] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [495.321275] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [495.321283] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [495.321322] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [495.321650] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [495.323388] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [495.323645] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [495.326573] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [495.327140] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [495.327265] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [495.327738] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [495.327861] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [495.327866] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [495.327988] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [495.329383] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [495.329388] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [495.329513] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [495.354517] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [495.354522] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [495.354525] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [495.354528] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48.

<7> [495.354531] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [495.354534] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [495.354538] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV

<7> [495.354541] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [495.354545] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3

<7> [495.354913] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [495.355046] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [495.355522] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [495.355646] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [495.355664] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [495.360035] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [495.430232] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [495.431166] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [495.431919] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [495.432684] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [495.433421] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [495.512022] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [495.512659] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [495.517406] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [495.521910] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [495.522412] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [495.522944] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [495.523515] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [495.526835] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [495.535940] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [495.537714] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [495.539048] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000

<7> [495.542045] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [495.543068] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [495.550685] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [495.551106] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [495.551277] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [495.557200] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.559072] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.561082] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.563099] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.564947] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.567015] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.568882] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.570925] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.574974] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.577104] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.579199] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.581102] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.583054] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.585118] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.587059] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.589084] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.590960] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [495.591017] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [495.591032] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [495.591044] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [495.591057] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [495.591070] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [495.591085] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [495.591101] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [495.591117] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [495.591175] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [495.591424] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [495.592945] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [495.593446] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [495.596284] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [495.596915] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [495.597039] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [495.597380] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [495.597475] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [495.597480] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [495.597576] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [495.598827] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [495.598830] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [495.598925] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [495.624183] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [495.624187] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [495.624189] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [495.624191] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48.

<7> [495.624194] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [495.624196] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [495.624199] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV

<7> [495.624201] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [495.624204] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3

<7> [495.624361] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [495.624451] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [495.624774] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [495.624859] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [495.624870] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [495.629080] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [495.702298] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [495.703222] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [495.703869] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [495.704562] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [495.705182] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [495.782007] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [495.782652] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [495.789149] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [495.789708] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [495.790318] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [495.790892] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A]

<7> [495.791525] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [495.792114] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [495.792664] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2

<7> [495.793392] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [495.793822] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [495.794329] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037

<7> [495.794695] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59

<7> [495.795038] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [495.795356] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0

<7> [495.795669] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255

<7> [495.795741] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267

<7> [495.795826] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 594000 num active planes 1

<7> [495.795951] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000

<7> [495.796058] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000

<7> [495.796159] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624

<7> [495.796274] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz

<7> [495.796387] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated TC PLL 2

<7> [495.796480] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving TC PLL 2

<7> [495.796573] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset]

<7> [495.796673] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [495.796771] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0

<7> [495.796872] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [495.796976] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [495.797078] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [495.797171] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [495.797270] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64

<7> [495.797372] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [495.797474] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [495.797574] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [495.797673] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [495.797773] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [495.797873] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [495.797977] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00

<7> [495.798077] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11

<7> [495.798178] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00

<7> [495.798279] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [495.798379] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [495.798479] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36

<7> [495.798580] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125

<7> [495.798680] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [495.798781] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [495.798886] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [495.799000] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [495.799103] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [495.799207] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [495.799309] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [495.799411] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [495.799512] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [495.799613] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [495.799713] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [495.799814] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [495.799914] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [495.800021] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000

<7> [495.800121] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [495.800221] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c

<7> [495.800322] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110

<7> [495.800428] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c

<7> [495.800528] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1

<7> [495.800629] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a

<7> [495.800729] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81

<7> [495.800827] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000

<7> [495.800929] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001

<7> [495.801040] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000

<7> [495.801139] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [495.801239] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000

<7> [495.801337] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00

<7> [495.801436] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x40000000 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [495.801535] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [495.801634] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [495.801733] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0db0 0x0000 0x0000

<7> [495.801832] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0db0 0x0000

<7> [495.801930] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0db0

<7> [495.802050] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0100 0x0100 0x0100

<7> [495.802149] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [495.802248] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [495.802348] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [495.802445] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [495.802544] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [495.802642] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [495.802741] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [495.802841] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [495.802942] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [495.803061] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no

<7> [495.803164] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no

<7> [495.803265] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no

<7> [495.803366] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no

<7> [495.803468] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no

<7> [495.804049] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [495.804387] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [495.804870] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [495.805231] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000)

<7> [495.805344] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [495.805697] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F]

<7> [495.805793] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A]

<7> [495.805888] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B]

<7> [495.805987] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C]

<7> [495.806089] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D]

<7> [495.806179] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G]

<7> [495.806266] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A]

<7> [495.806353] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B]

<7> [495.806448] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C]

<7> [495.806540] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D]

<7> [495.806629] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H]

<7> [495.806717] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I]

<7> [495.806804] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A]

<7> [495.806891] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B]

<7> [495.806985] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C]

<7> [495.807072] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D]

<7> [495.807371] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [495.807546] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [495.807837] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [495.807949] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:150:pipe A]

<7> [495.808051] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2

<7> [495.810687] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [495.815841] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [495.825334] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [495.826933] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [495.827371] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a

<7> [495.828870] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [495.829433] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1

<7> [495.836477] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Clock recovery OK

<7> [495.836673] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3

<7> [495.843769] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful

<7> [495.844094] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4

<7> [495.845492] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [495.863335] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G] Enable audio codec on [CRTC:150:pipe A], 40 bytes ELD

<7> [495.880124] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:526:DP-2]

<7> [495.880987] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A]

<7> [495.886686] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [495.891190] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [495.894376] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [495.908774] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [495.911157] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [495.913096] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000

<7> [495.918501] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [495.920498] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [495.930081] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [495.930305] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [495.930523] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [495.938045] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.940062] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.942093] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.944115] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.946130] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.948158] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.950187] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.952215] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.956283] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.958325] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.960288] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.962325] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.964338] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.966309] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.968332] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.970334] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [495.972086] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [495.972099] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [495.972105] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [495.972109] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [495.972114] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [495.972118] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [495.972124] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [495.972130] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [495.972136] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [495.972160] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [495.972380] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [495.974110] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [495.974290] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [495.977131] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [495.977643] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [495.977738] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [495.978173] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [495.978260] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [495.978265] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [495.978349] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [495.979698] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [495.979702] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [495.979792] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [496.005505] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [496.005509] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [496.005511] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [496.005513] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 48.

<7> [496.005515] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [496.005518] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [496.005520] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor Mi TV

<7> [496.005523] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [496.005526] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 36, SAD count 3

<7> [496.005682] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [496.005769] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [496.006199] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [496.006288] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [496.006300] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [496.010415] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [496.014691] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [496.014807] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [496.014919] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B]

<7> [496.015023] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [496.015124] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [496.015223] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3

<7> [496.015345] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [496.015431] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [496.015512] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [496.015641] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [496.015732] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [496.015833] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B]

<7> [496.015941] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [496.016041] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [496.016145] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3

<7> [496.016283] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [496.016372] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [496.016474] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B]

<7> [496.016574] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [496.016673] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [496.016770] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3

<7> [496.016878] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [496.016976] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [496.017052] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [496.017199] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [496.017291] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [496.017392] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B]

<7> [496.017493] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [496.017593] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [496.017690] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3

<7> [496.017797] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [496.017879] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [496.017967] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [496.018072] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989

<7> [496.018148] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59

<7> [496.018220] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989

<7> [496.018289] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59

<7> [496.018360] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [496.018428] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0

<7> [496.018497] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255

<7> [496.018565] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267

<7> [496.018644] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 594000 num active planes 1

<7> [496.018750] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000

<7> [496.018850] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000

<7> [496.018957] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248

<7> [496.019065] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz

<7> [496.019176] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated TC PLL 3

<7> [496.019274] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving TC PLL 3

<7> [496.019369] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset]

<7> [496.019471] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [496.019574] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0

<7> [496.019674] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [496.019771] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [496.019867] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [496.019976] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [496.020071] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [496.020165] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [496.020258] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [496.020261] xe 0000:03:00.0: scan mode: Underscan

<7> [496.020262] xe 0000:03:00.0: colorimetry: No Data

<7> [496.020263] xe 0000:03:00.0: picture aspect: 16:9

<7> [496.020264] xe 0000:03:00.0: active aspect: Same as Picture

<7> [496.020266] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [496.020267] xe 0000:03:00.0: quantization range: Limited

<7> [496.020268] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [496.020270] xe 0000:03:00.0: ycc quantization range: Limited

<7> [496.020271] xe 0000:03:00.0: hdmi content type: Graphics

<7> [496.020273] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [496.020275] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [496.020277] xe 0000:03:00.0: product: Discrete gfx

<7> [496.020278] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [496.020279] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [496.020282] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00

<7> [496.020375] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51

<7> [496.020467] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00

<7> [496.020559] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [496.020653] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [496.020746] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36

<7> [496.020840] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [496.020940] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [496.021034] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [496.021129] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [496.021223] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [496.021318] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [496.021412] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [496.021509] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [496.021608] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [496.021703] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [496.021797] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [496.021892] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [496.021999] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [496.022094] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [496.022187] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [496.022281] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [496.022374] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8

<7> [496.022468] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [496.022561] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06

<7> [496.022654] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [496.022747] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [496.022841] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [496.022941] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [496.023035] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [496.023128] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400

<7> [496.023221] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [496.023314] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [496.023407] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [496.023501] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x40000000 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [496.023593] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [496.023687] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [496.023780] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0db0 0x0000 0x0000

<7> [496.023873] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0db0 0x0000

<7> [496.023978] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0db0

<7> [496.024082] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0100 0x0100 0x0100

<7> [496.024182] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [496.024281] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [496.024379] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [496.024478] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [496.024576] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [496.024673] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [496.024768] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [496.024866] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [496.024977] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [496.025079] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no

<7> [496.025177] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no

<7> [496.025274] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no

<7> [496.025375] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no

<7> [496.025470] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no

<7> [496.026354] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [496.026503] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000)

<7> [496.026826] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F]

<7> [496.026924] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A]

<7> [496.027013] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B]

<7> [496.027105] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C]

<7> [496.027191] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D]

<7> [496.027272] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G]

<7> [496.027353] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A]

<7> [496.027432] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B]

<7> [496.027511] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C]

<7> [496.027596] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D]

<7> [496.027678] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H]

<7> [496.027758] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I]

<7> [496.027838] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A]

<7> [496.027924] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B]

<7> [496.028004] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C]

<7> [496.028083] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D]

<7> [496.046251] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [496.046565] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A)

<7> [496.063247] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x2, on? 0) for [CRTC:268:pipe B]

<7> [496.063609] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3

<7> [496.066894] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe B

<7> [496.077963] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [496.085982] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:538:HDMI-A-3][ENCODER:537:DDI TC3/PHY H] Enable audio codec on [CRTC:268:pipe B], 36 bytes ELD

<7> [496.102860] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000)

<7> [496.103595] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N

<7> [496.104608] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [496.105408] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]

<6> [496.112053] [IGT] xe_pm: finished subtest d3hot-multiple-execs, SUCCESS

<7> [496.130851] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0

<6> [496.153914] Console: switching to colour frame buffer device 240x67

Results for igt@xe_pm@d3hot-multiple-execs