igt@xe_pm@d3hot-mmap-vram on shard-bmg@xe-4573-7ee0795cb4f30c9ccc2b8a580faebcefbdf150c5 Test details

Detail	Value
Duration	13.30 seconds
Hostname	shard-bmg-1
Igt-Version	IGT-Version: 2.3-g30ecfbf68 (x86_64) (Linux: 6.19.0-lgci-xe-xe-4573-7ee0795cb4f30c9cc-debug+ x86_64)
Out	Using IGT_SRANDOM=1771434646 for randomisation Opened device: /dev/dri/card0 Starting subtest: d3hot-mmap-vram Subtest d3hot-mmap-vram: SUCCESS (13.300s)
Err	Starting subtest: d3hot-mmap-vram Subtest d3hot-mmap-vram: SUCCESS (13.300s)
Dmesg	<6> [480.777365] Console: switching to colour dummy device 80x25 <6> [480.777696] [IGT] xe_pm: executing <6> [480.821575] [IGT] xe_pm: starting subtest d3hot-mmap-vram <7> [480.822544] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [480.822679] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [480.822790] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [480.822898] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A] <7> [480.823005] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [480.823112] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [480.823209] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2 <7> [480.823375] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [480.823511] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [480.823610] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [480.823710] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A] <7> [480.823810] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [480.823908] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [480.824005] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2 <7> [480.824121] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [480.824203] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2 <7> [480.824289] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2 <7> [480.824449] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [480.824549] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [480.824644] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [480.824747] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A] <7> [480.824846] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [480.824945] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [480.825040] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2 <7> [480.825146] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [480.825226] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2 <7> [480.825312] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2 <7> [480.825414] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0 <7> [480.825504] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0 <7> [480.825578] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [480.825651] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [480.825724] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [480.825797] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [480.825870] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 1989) -> ( 0 - 4037), size 1989 -> 4037 <7> [480.825946] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb (1989 - 2048) -> (4037 - 4096), size 59 -> 59 <7> [480.826033] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0 <7> [480.826133] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000 <7> [480.826231] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000 <7> [480.826326] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624 <7> [480.826443] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz <7> [480.826554] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated TC PLL 2 <7> [480.826650] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving TC PLL 2 <7> [480.826745] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset] <7> [480.826846] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [480.826945] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [480.827042] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [480.827139] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [480.827237] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [480.827332] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [480.827434] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 <7> [480.827528] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [480.827619] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [480.827710] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [480.827799] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [480.827889] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [480.827981] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [480.828076] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00 <7> [480.828168] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11 <7> [480.828260] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00 <7> [480.828351] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [480.828448] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [480.828538] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36 <7> [480.828630] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125 <7> [480.828722] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [480.828812] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [480.828908] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [480.829005] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [480.829100] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [480.829193] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [480.829286] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [480.829377] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [480.829479] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [480.829571] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [480.829662] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [480.829753] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [480.829844] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [480.829934] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000 <7> [480.830025] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [480.830116] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c <7> [480.830207] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110 <7> [480.830297] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c <7> [480.830388] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1 <7> [480.830488] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a <7> [480.830579] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81 <7> [480.830671] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000 <7> [480.830763] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001 <7> [480.830854] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000 <7> [480.830944] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [480.831037] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000 <7> [480.831127] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00 <7> [480.831217] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [480.831311] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [480.831401] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [480.831561] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [480.831653] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [480.831744] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [480.831835] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [480.831926] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [480.832016] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [480.832106] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [480.832197] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [480.832287] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [480.832377] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [480.832491] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [480.832587] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [480.832681] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7> [480.832774] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7> [480.832867] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7> [480.832957] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7> [480.833047] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7> [480.833567] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G] Disable audio codec on [CRTC:150:pipe A] <7> [480.861739] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [480.883382] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [480.886592] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:150:pipe A] <7> [480.889005] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2 <7> [480.889819] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F] <7> [480.890291] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A] <7> [480.890778] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B] <7> [480.891208] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C] <7> [480.891657] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D] <7> [480.892073] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G] <7> [480.892500] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A] <7> [480.892915] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B] <7> [480.893330] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C] <7> [480.893727] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D] <7> [480.894091] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H] <7> [480.894466] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I] <7> [480.894790] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A] <7> [480.895118] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B] <7> [480.895458] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C] <7> [480.895768] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D] <7> [480.897946] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: B) <7> [480.898421] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [480.915814] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [480.916556] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000) <7> [480.917289] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:526:DP-2] <7> [480.918010] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A] <7> [480.919807] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [480.920325] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [480.920909] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B] <7> [480.921427] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [480.921998] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [480.922475] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3 <7> [480.923158] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [480.923607] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [480.924015] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B] <7> [480.924400] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [480.924815] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [480.925162] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3 <7> [480.925571] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [480.925835] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0 <7> [480.926136] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0 <7> [480.926371] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb (4037 - 4096) -> ( 0 - 0), size 59 -> 0 <7> [480.926617] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [480.926834] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [480.927049] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [480.927253] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [480.927490] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [480.927746] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000 <7> [480.927995] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000 <7> [480.928248] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0 <7> [480.928552] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz <7> [480.928790] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated TC PLL 3 <7> [480.928995] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving TC PLL 3 <7> [480.929191] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset] <7> [480.929402] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [480.929626] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0 <7> [480.929817] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [480.930000] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [480.930171] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [480.930335] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [480.930510] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [480.930668] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [480.930823] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [480.930826] xe 0000:03:00.0: colorspace: RGB <7> [480.930828] xe 0000:03:00.0: scan mode: Underscan <7> [480.930830] xe 0000:03:00.0: colorimetry: No Data <7> [480.930831] xe 0000:03:00.0: picture aspect: No Data <7> [480.930833] xe 0000:03:00.0: active aspect: Same as Picture <7> [480.930835] xe 0000:03:00.0: itc: No Data <7> [480.930837] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [480.930839] xe 0000:03:00.0: quantization range: Full <7> [480.930840] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [480.930842] xe 0000:03:00.0: video code: 0 <7> [480.930844] xe 0000:03:00.0: ycc quantization range: Full <7> [480.930846] xe 0000:03:00.0: hdmi content type: Graphics <7> [480.930847] xe 0000:03:00.0: pixel repeat: 0 <7> [480.930849] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [480.930852] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [480.930854] xe 0000:03:00.0: vendor: Intel <7> [480.930856] xe 0000:03:00.0: product: Discrete gfx <7> [480.930858] xe 0000:03:00.0: source device information: PC General (0x9) <7> [480.930860] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [480.930862] xe 0000:03:00.0: empty frame <7> [480.930864] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 07 00 66 10 00 01 00 00 00 00 00 00 00 00 <7> [480.931017] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 05 e3 cd 0c 32 38 45 38 35 30 09 07 07 00 00 00 <7> [480.931160] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [480.931301] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [480.931442] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37 <7> [480.931578] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [480.931712] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [480.931843] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9 <7> [480.931975] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9 <7> [480.932103] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9 <7> [480.932226] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9 <7> [480.932348] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9 <7> [480.932477] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [480.932594] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [480.932708] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [480.932817] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [480.932929] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [480.933041] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [480.933151] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [480.933252] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [480.933354] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [480.933457] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8 <7> [480.933556] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [480.933652] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06 <7> [480.933746] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [480.933840] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [480.933932] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [480.934025] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [480.934116] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [480.934207] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400 <7> [480.934296] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [480.934388] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [480.934485] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [480.934576] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [480.934674] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [480.934771] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [480.934867] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [480.934962] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [480.935055] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [480.935148] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [480.935242] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [480.935334] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [480.935425] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [480.935530] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [480.935622] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [480.935713] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [480.935805] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [480.935898] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [480.935990] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no <7> [480.936082] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no <7> [480.936175] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no <7> [480.936268] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no <7> [480.936362] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no <7> [480.936762] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:538:HDMI-A-3][ENCODER:537:DDI TC3/PHY H] Disable audio codec on [CRTC:268:pipe B] <7> [480.966344] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe B <7> [480.987576] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [480.988839] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x2, on? 1) for [CRTC:268:pipe B] <7> [480.991380] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3 <7> [480.992291] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F] <7> [480.992840] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A] <7> [480.993317] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B] <7> [480.993833] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C] <7> [480.994301] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D] <7> [480.994795] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G] <7> [480.995260] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A] <7> [480.995757] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B] <7> [480.996215] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C] <7> [480.996713] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D] <7> [480.997184] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H] <7> [480.997673] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I] <7> [480.998128] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A] <7> [480.998601] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B] <7> [480.999069] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C] <7> [480.999481] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D] <7> [481.000121] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [481.000728] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [481.001263] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [481.002133] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [481.002697] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xaa000000) <7> [481.003251] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [481.003776] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:538:HDMI-A-3] <7> [481.004061] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <7> [481.022479] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [481.023233] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [481.023991] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [481.024740] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [482.340423] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [482.340614] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [482.344851] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [482.349364] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [482.349840] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [482.350502] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [482.351181] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [482.354625] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [482.365306] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [482.366971] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [482.368442] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [482.372554] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [482.373923] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [482.383343] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [482.383679] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [482.383772] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [482.389049] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.390908] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.392750] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.394599] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.396427] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.398422] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.400419] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.402426] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.406472] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.408460] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.410462] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.412304] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.414322] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.416323] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.418312] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.420315] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.422072] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [482.422089] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [482.422097] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [482.422105] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [482.422114] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [482.422122] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [482.422132] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [482.422142] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [482.422152] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [482.422192] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [482.422466] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [482.423888] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [482.424196] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [482.426828] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [482.427384] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [482.427546] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [482.427878] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [482.427964] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [482.427969] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [482.428054] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [482.429297] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [482.429300] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [482.429387] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [482.454223] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [482.454226] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [482.454229] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [482.454231] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [482.454233] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [482.454235] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [482.454238] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [482.454241] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [482.454243] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [482.454497] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [482.454596] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [482.454923] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [482.455012] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [482.455023] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [482.459218] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [482.531813] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [482.532673] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [482.533314] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [482.533985] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [482.534608] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [483.661388] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [483.662411] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [483.667318] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [483.671897] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [483.672518] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [483.673386] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [483.674224] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [483.677729] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [483.688325] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [483.690019] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [483.691466] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [483.695574] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [483.696940] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [483.706744] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [483.707146] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [483.707273] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [483.713364] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [483.715348] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [483.717359] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [483.719365] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [483.721229] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [483.723059] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [483.724899] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [483.726953] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [483.730713] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [483.732565] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [483.734582] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [483.736454] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [483.738293] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [483.740332] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [483.742171] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [483.744014] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [483.746268] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [483.746293] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [483.746304] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [483.746313] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [483.746322] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [483.746331] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [483.746343] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [483.746355] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [483.746366] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [483.746415] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [483.746831] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [483.748307] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [483.748688] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [483.751018] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [483.751589] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [483.751690] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [483.752028] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [483.752115] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [483.752119] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [483.752205] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [483.753446] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [483.753450] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [483.753542] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [483.778399] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [483.778403] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [483.778406] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [483.778408] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [483.778411] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [483.778414] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [483.778417] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [483.778420] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [483.778424] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [483.778677] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [483.778770] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [483.779107] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [483.779196] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [483.779207] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [483.783442] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [483.851891] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [483.852744] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [483.853416] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [483.854099] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [483.854761] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [485.186939] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [485.187339] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [485.191565] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [485.195917] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [485.196329] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [485.196755] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [485.197352] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [485.201271] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [485.215018] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [485.217206] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [485.219068] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [485.223540] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [485.225070] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [485.234517] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [485.234705] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [485.234888] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [485.241052] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [485.243008] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [485.245022] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [485.246951] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [485.248980] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [485.251002] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [485.253024] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [485.255054] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [485.259071] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [485.261110] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [485.263139] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [485.265112] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [485.267156] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [485.269111] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [485.271121] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [485.273115] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [485.274908] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [485.274923] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [485.274930] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [485.274936] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [485.274942] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [485.274949] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [485.274957] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [485.274965] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [485.274973] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [485.275004] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [485.275259] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [485.277009] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [485.277165] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [485.279950] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [485.280446] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [485.280539] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [485.280988] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [485.281119] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [485.281124] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [485.281256] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [485.282661] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [485.282665] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [485.282774] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [485.308069] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [485.308073] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [485.308076] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [485.308078] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [485.308081] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [485.308083] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [485.308086] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [485.308089] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [485.308091] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [485.308255] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [485.308346] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [485.308800] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [485.308938] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [485.308956] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [485.313109] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [485.388080] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [485.389100] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [485.389975] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [485.390798] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [485.391618] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [486.910097] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [486.910694] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [486.915566] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [486.920171] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [486.920991] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [486.921872] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [486.922698] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [486.927358] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [486.941896] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [486.944290] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [486.946240] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [486.951750] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [486.953599] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [486.964844] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [486.965076] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [486.965302] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [486.971690] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [486.973694] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [486.975644] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [486.977560] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [486.979507] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [486.981430] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [486.983432] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [486.985398] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [486.989548] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [486.991495] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [486.993498] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [486.995442] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [486.997363] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [486.999310] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [487.001241] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [487.003275] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [487.005036] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [487.005051] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [487.005058] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [487.005063] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [487.005068] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [487.005074] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [487.005081] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [487.005088] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [487.005094] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [487.005124] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [487.005385] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [487.007116] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [487.007323] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [487.010201] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [487.010733] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [487.010825] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [487.011282] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [487.011370] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [487.011375] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [487.011463] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [487.012805] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [487.012808] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [487.012910] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [487.038641] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [487.038644] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [487.038647] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [487.038649] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [487.038651] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [487.038653] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [487.038657] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [487.038659] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [487.038662] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [487.038819] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [487.038924] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [487.039356] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [487.039443] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [487.039454] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [487.043594] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [487.116179] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [487.117172] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [487.118142] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [487.119076] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [487.120014] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [488.231949] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [488.232541] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [488.237239] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [488.241924] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [488.242577] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [488.243374] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [488.244104] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [488.248762] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [488.262824] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [488.265197] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [488.267134] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [488.272981] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [488.274780] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [488.284952] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [488.285176] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [488.285377] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [488.291709] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [488.293654] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [488.295570] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [488.297504] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [488.299465] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [488.301469] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [488.303435] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [488.305450] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [488.309547] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [488.311556] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [488.313523] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [488.315450] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [488.317433] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [488.319451] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [488.321385] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [488.323426] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [488.325269] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [488.325287] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [488.325296] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [488.325304] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [488.325312] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [488.325320] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [488.325331] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [488.325341] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [488.325350] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [488.325378] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [488.325597] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [488.327268] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [488.327498] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [488.330373] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [488.330942] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [488.331035] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [488.331471] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [488.331561] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [488.331565] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [488.331656] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [488.333014] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [488.333018] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [488.333107] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [488.358577] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [488.358581] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [488.358583] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [488.358586] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [488.358588] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [488.358590] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [488.358593] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [488.358596] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [488.358599] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [488.358955] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [488.359045] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [488.359484] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [488.359570] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [488.359581] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [488.363805] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [488.436233] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [488.437207] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [488.438014] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [488.438750] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [488.439533] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [489.758998] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [489.759113] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [489.763258] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [489.767735] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [489.768230] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [489.768835] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [489.769543] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [489.773832] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [489.788398] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [489.790650] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [489.792564] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [489.797647] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [489.799374] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [489.809555] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [489.809753] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [489.809925] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [489.816118] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [489.818139] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [489.820174] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [489.822196] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [489.824217] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [489.826245] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [489.828261] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [489.830286] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [489.834359] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [489.836341] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [489.838320] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [489.840284] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [489.842209] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [489.844270] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [489.846304] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [489.848251] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [489.850078] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [489.850093] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [489.850099] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [489.850104] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [489.850109] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [489.850114] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [489.850120] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [489.850126] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [489.850133] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [489.850161] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [489.850403] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [489.852108] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [489.852296] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [489.855131] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [489.855667] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [489.855762] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [489.856201] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [489.856291] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [489.856295] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [489.856381] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [489.857730] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [489.857734] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [489.857823] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [489.882786] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [489.882789] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [489.882792] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [489.882794] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [489.882796] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [489.882798] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [489.882801] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [489.882804] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [489.882807] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [489.883176] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [489.883272] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [489.883716] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [489.883803] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [489.883815] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [489.887957] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [489.956309] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [489.957291] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [489.958100] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [489.958836] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [489.959711] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [491.077434] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [491.078038] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [491.082883] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [491.087475] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [491.088213] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [491.089088] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [491.089962] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [491.094685] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [491.108974] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [491.111341] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [491.113294] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [491.118521] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [491.120333] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [491.132245] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [491.132486] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [491.132725] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [491.139176] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [491.141214] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [491.143240] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [491.145274] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [491.147330] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [491.149355] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [491.151389] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [491.153434] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [491.157662] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [491.159589] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [491.161507] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [491.163452] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [491.165493] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [491.167458] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [491.169483] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [491.171481] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [491.173320] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [491.173332] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [491.173337] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [491.173342] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [491.173346] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [491.173351] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [491.173357] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [491.173362] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [491.173367] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [491.173391] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [491.173599] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [491.175312] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [491.175484] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [491.178300] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [491.178813] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [491.178908] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [491.179340] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [491.179430] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [491.179435] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [491.179521] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [491.180867] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [491.180871] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [491.180958] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [491.206186] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [491.206189] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [491.206191] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [491.206194] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [491.206196] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [491.206198] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [491.206201] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [491.206204] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [491.206206] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [491.206574] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [491.206667] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [491.207107] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [491.207193] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [491.207205] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [491.211432] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [491.284338] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [491.285337] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [491.286327] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [491.287275] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [491.288205] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [492.500166] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [492.501309] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [492.505976] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [492.510909] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [492.511591] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [492.512359] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [492.513089] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [492.517686] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [492.532055] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [492.534260] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [492.536242] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [492.541885] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [492.543451] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [492.553165] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [492.553361] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [492.553546] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [492.559858] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.561773] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.563702] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.565629] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.567564] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.569475] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.571498] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.573702] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.577743] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.579693] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.581616] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.583856] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.586055] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.588048] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.590055] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.592076] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [492.593886] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [492.593902] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [492.593908] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [492.593913] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [492.593919] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [492.593924] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [492.593931] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [492.593938] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [492.593944] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [492.593973] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [492.594273] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [492.596055] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [492.596298] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [492.599193] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [492.599756] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [492.599848] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [492.600279] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [492.600375] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [492.600379] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [492.600468] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [492.601866] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [492.601870] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [492.601959] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [492.627167] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [492.627172] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [492.627174] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [492.627176] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [492.627179] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [492.627181] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [492.627184] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [492.627187] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [492.627189] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [492.627342] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [492.627435] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [492.627878] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [492.627965] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [492.627977] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [492.632094] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [492.700433] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [492.701433] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [492.702188] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [492.702926] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [492.703707] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [493.822258] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [493.822623] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [493.826829] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [493.831349] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [493.831828] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [493.832533] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [493.833240] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [493.837359] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [493.847927] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [493.849788] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [493.851277] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [493.855167] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [493.856588] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [493.866238] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [493.866601] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [493.866750] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [493.872685] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.874505] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.876504] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.878358] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.880249] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.882192] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.884236] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.886094] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.890007] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.891994] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.893994] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.895835] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.897699] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.899528] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.901427] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.903540] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [493.905101] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [493.905125] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [493.905135] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [493.905143] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [493.905152] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [493.905160] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [493.905171] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [493.905181] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [493.905192] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [493.905269] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [493.905603] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [493.907037] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [493.907381] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [493.909644] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [493.910191] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [493.910301] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [493.910642] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [493.910731] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [493.910735] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [493.910827] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [493.912075] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [493.912079] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [493.912168] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [493.937024] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [493.937028] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [493.937030] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [493.937032] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [493.937035] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [493.937037] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [493.937040] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [493.937043] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [493.937046] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [493.937304] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [493.937415] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [493.937749] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [493.937835] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [493.937847] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [493.941957] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [493.946512] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [493.946634] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [493.946742] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [493.946848] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A] <7> [493.946952] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [493.947059] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [493.947156] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2 <7> [493.947332] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [493.947434] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [493.947530] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [493.947632] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A] <7> [493.947732] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [493.947830] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [493.947928] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2 <7> [493.948050] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [493.948133] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [493.948290] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [493.948389] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [493.948486] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [493.948586] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A] <7> [493.948686] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [493.948785] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [493.948884] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2 <7> [493.948992] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [493.949074] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [493.949174] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037 <7> [493.949266] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59 <7> [493.949342] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [493.949415] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 <7> [493.949487] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 <7> [493.949560] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 <7> [493.949653] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 594000 num active planes 1 <7> [493.949754] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000 <7> [493.949855] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000 <7> [493.949951] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624 <7> [493.950059] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz <7> [493.950170] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated TC PLL 2 <7> [493.950271] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving TC PLL 2 <7> [493.950366] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset] <7> [493.950469] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [493.950569] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [493.950664] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [493.950758] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [493.950851] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [493.950945] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [493.951038] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 <7> [493.951130] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [493.951226] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [493.951319] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [493.951410] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [493.951503] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [493.951598] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [493.951695] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00 <7> [493.951789] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11 <7> [493.951883] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00 <7> [493.951975] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [493.952068] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [493.952161] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36 <7> [493.952267] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125 <7> [493.952358] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [493.952450] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [493.952543] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [493.952635] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [493.952729] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [493.952821] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [493.952917] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [493.953014] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [493.953108] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [493.953205] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [493.953300] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [493.953394] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [493.953488] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [493.953580] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000 <7> [493.953673] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [493.953765] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c <7> [493.953856] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110 <7> [493.953946] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c <7> [493.954043] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1 <7> [493.954139] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a <7> [493.954242] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81 <7> [493.954335] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000 <7> [493.954429] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001 <7> [493.954522] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000 <7> [493.954614] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [493.954706] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000 <7> [493.954797] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00 <7> [493.954890] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [493.954984] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [493.955075] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [493.955166] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [493.955266] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [493.955357] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [493.955448] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [493.955540] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [493.955631] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [493.955722] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [493.955813] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [493.955905] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [493.955994] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [493.956084] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [493.956176] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [493.956282] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [493.956375] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7> [493.956466] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7> [493.956557] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7> [493.956655] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7> [493.956749] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7> [493.957322] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [493.957466] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000) <7> [493.957566] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [493.957908] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F] <7> [493.957999] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A] <7> [493.958085] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B] <7> [493.958171] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C] <7> [493.958264] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D] <7> [493.958350] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G] <7> [493.958433] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A] <7> [493.958515] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B] <7> [493.958596] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C] <7> [493.958677] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D] <7> [493.958760] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H] <7> [493.958844] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I] <7> [493.958926] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A] <7> [493.959007] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B] <7> [493.959088] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C] <7> [493.959170] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D] <7> [493.959469] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [493.959633] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [493.959915] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [493.960018] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:150:pipe A] <7> [493.960112] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2 <7> [493.965285] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [493.970350] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [493.971420] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [493.971868] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a <7> [493.973436] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [493.974027] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1 <7> [493.981138] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Clock recovery OK <7> [493.981440] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3 <7> [493.989185] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful <7> [493.989614] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4 <7> [493.991054] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [494.009002] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G] Enable audio codec on [CRTC:150:pipe A], 40 bytes ELD <7> [494.025701] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:526:DP-2] <7> [494.026496] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A] <7> [494.031951] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [494.032493] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [494.033013] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B] <7> [494.033521] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [494.033999] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [494.034467] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3 <7> [494.035109] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [494.035513] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [494.035886] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B] <7> [494.036253] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [494.036593] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [494.036920] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3 <7> [494.037391] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [494.037681] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [494.037966] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B] <7> [494.038266] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [494.038570] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [494.038832] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3 <7> [494.039126] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [494.039369] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [494.039560] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [494.039915] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [494.040138] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [494.040382] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B] <7> [494.040601] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [494.040805] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [494.041011] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3 <7> [494.041249] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [494.041417] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [494.041571] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [494.041763] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989 <7> [494.041902] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59 <7> [494.042037] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989 <7> [494.042159] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59 <7> [494.042312] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [494.042439] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 <7> [494.042560] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 <7> [494.042683] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 <7> [494.042824] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 594000 num active planes 1 <7> [494.042985] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000 <7> [494.043132] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000 <7> [494.043289] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248 <7> [494.043448] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz <7> [494.043600] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated TC PLL 3 <7> [494.043735] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving TC PLL 3 <7> [494.043864] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset] <7> [494.044002] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [494.044135] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0 <7> [494.044270] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [494.044392] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [494.044511] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [494.044627] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [494.044737] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [494.044846] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [494.044954] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [494.044956] xe 0000:03:00.0: colorspace: RGB <7> [494.044957] xe 0000:03:00.0: scan mode: Underscan <7> [494.044958] xe 0000:03:00.0: colorimetry: No Data <7> [494.044960] xe 0000:03:00.0: picture aspect: No Data <7> [494.044961] xe 0000:03:00.0: active aspect: Same as Picture <7> [494.044962] xe 0000:03:00.0: itc: No Data <7> [494.044963] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [494.044964] xe 0000:03:00.0: quantization range: Full <7> [494.044966] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [494.044967] xe 0000:03:00.0: video code: 0 <7> [494.044968] xe 0000:03:00.0: ycc quantization range: Full <7> [494.044969] xe 0000:03:00.0: hdmi content type: Graphics <7> [494.044970] xe 0000:03:00.0: pixel repeat: 0 <7> [494.044972] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [494.044973] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [494.044975] xe 0000:03:00.0: vendor: Intel <7> [494.044976] xe 0000:03:00.0: product: Discrete gfx <7> [494.044977] xe 0000:03:00.0: source device information: PC General (0x9) <7> [494.044979] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [494.044980] xe 0000:03:00.0: empty frame <7> [494.044982] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 07 00 66 10 00 01 00 00 00 00 00 00 00 00 <7> [494.045089] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 05 e3 cd 0c 32 38 45 38 35 30 09 07 07 00 00 00 <7> [494.045188] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [494.045328] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [494.045425] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37 <7> [494.045524] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [494.045624] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [494.045720] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9 <7> [494.045816] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9 <7> [494.045909] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9 <7> [494.046002] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9 <7> [494.046095] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9 <7> [494.046187] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [494.046294] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [494.046385] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [494.046477] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [494.046570] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [494.046662] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [494.046755] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [494.046847] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [494.046938] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [494.047029] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8 <7> [494.047122] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [494.047218] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06 <7> [494.047309] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [494.047399] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [494.047490] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [494.047580] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [494.047671] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [494.047761] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400 <7> [494.047860] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [494.047958] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [494.048051] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [494.048149] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [494.048249] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [494.048343] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [494.048434] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [494.048526] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [494.048618] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [494.048710] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [494.048805] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [494.048898] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [494.048994] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [494.049084] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [494.049177] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [494.049280] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [494.049371] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [494.049463] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [494.049557] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [494.049653] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no <7> [494.049747] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no <7> [494.049838] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no <7> [494.049930] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no <7> [494.050021] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no <7> [494.050628] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [494.050773] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000) <7> [494.051091] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F] <7> [494.051182] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A] <7> [494.051284] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B] <7> [494.051373] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C] <7> [494.051459] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D] <7> [494.051554] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G] <7> [494.051638] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A] <7> [494.051721] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B] <7> [494.051803] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C] <7> [494.051884] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D] <7> [494.051971] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H] <7> [494.052055] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I] <7> [494.052136] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A] <7> [494.052218] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B] <7> [494.052297] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C] <7> [494.052377] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D] <7> [494.058508] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [494.058828] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A) <7> [494.075435] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x2, on? 0) for [CRTC:268:pipe B] <7> [494.075591] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3 <7> [494.078402] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe B <7> [494.092323] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [494.097106] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:538:HDMI-A-3][ENCODER:537:DDI TC3/PHY H] Enable audio codec on [CRTC:268:pipe B], 32 bytes ELD <7> [494.113695] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000) <7> [494.114251] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N <7> [494.115157] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:538:HDMI-A-3] <7> [494.115941] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <6> [494.122876] [IGT] xe_pm: finished subtest d3hot-mmap-vram, SUCCESS <7> [494.143327] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [494.144703] [IGT] xe_pm: exiting, ret=0 <6> [494.164557] Console: switching to colour frame buffer device 240x67

<6> [480.777365] Console: switching to colour dummy device 80x25

<6> [480.821575] [IGT] xe_pm: starting subtest d3hot-mmap-vram

<7> [480.822544] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [480.822679] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [480.822790] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [480.822898] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A]

<7> [480.823005] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [480.823112] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [480.823209] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2

<7> [480.823375] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [480.823511] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [480.823610] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [480.823710] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A]

<7> [480.823810] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [480.823908] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [480.824005] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2

<7> [480.824121] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [480.824203] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2

<7> [480.824289] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2

<7> [480.824449] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [480.824549] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [480.824644] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [480.824747] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A]

<7> [480.824846] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [480.824945] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [480.825040] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2

<7> [480.825146] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [480.825226] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2

<7> [480.825312] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2

<7> [480.825414] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0

<7> [480.825504] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0

<7> [480.825578] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [480.825651] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [480.825724] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [480.825797] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [480.825870] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 1989) -> ( 0 - 4037), size 1989 -> 4037

<7> [480.825946] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb (1989 - 2048) -> (4037 - 4096), size 59 -> 59

<7> [480.826033] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0

<7> [480.826133] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000

<7> [480.826231] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000

<7> [480.826326] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624

<7> [480.826443] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz

<7> [480.826554] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated TC PLL 2

<7> [480.826650] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving TC PLL 2

<7> [480.826745] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset]

<7> [480.826846] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [480.826945] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0

<7> [480.827042] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [480.827139] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [480.827237] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [480.827332] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [480.827434] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64

<7> [480.827528] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [480.827619] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [480.827710] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [480.827799] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [480.827889] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [480.827981] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [480.828076] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00

<7> [480.828168] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11

<7> [480.828260] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00

<7> [480.828351] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [480.828448] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [480.828538] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36

<7> [480.828630] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125

<7> [480.828722] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [480.828812] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [480.828908] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [480.829005] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [480.829100] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [480.829193] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [480.829286] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [480.829377] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [480.829479] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [480.829571] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [480.829662] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [480.829753] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [480.829844] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [480.829934] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000

<7> [480.830025] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [480.830116] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c

<7> [480.830207] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110

<7> [480.830297] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c

<7> [480.830388] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1

<7> [480.830488] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a

<7> [480.830579] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81

<7> [480.830671] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000

<7> [480.830763] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001

<7> [480.830854] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000

<7> [480.830944] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [480.831037] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000

<7> [480.831127] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00

<7> [480.831217] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [480.831311] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [480.831401] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [480.831561] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [480.831653] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [480.831744] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [480.831835] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [480.831926] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [480.832016] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [480.832106] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [480.832197] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [480.832287] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [480.832377] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [480.832491] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [480.832587] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [480.832681] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no

<7> [480.832774] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no

<7> [480.832867] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no

<7> [480.832957] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no

<7> [480.833047] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no

<7> [480.833567] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G] Disable audio codec on [CRTC:150:pipe A]

<7> [480.861739] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [480.883382] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [480.886592] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:150:pipe A]

<7> [480.889005] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2

<7> [480.889819] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F]

<7> [480.890291] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A]

<7> [480.890778] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B]

<7> [480.891208] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C]

<7> [480.891657] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D]

<7> [480.892073] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G]

<7> [480.892500] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A]

<7> [480.892915] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B]

<7> [480.893330] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C]

<7> [480.893727] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D]

<7> [480.894091] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H]

<7> [480.894466] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I]

<7> [480.894790] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A]

<7> [480.895118] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B]

<7> [480.895458] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C]

<7> [480.895768] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D]

<7> [480.897946] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: B)

<7> [480.898421] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [480.915814] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A

<7> [480.916556] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000)

<7> [480.917289] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:526:DP-2]

<7> [480.918010] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A]

<7> [480.919807] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [480.920325] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [480.920909] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B]

<7> [480.921427] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [480.921998] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [480.922475] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3

<7> [480.923158] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [480.923607] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [480.924015] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B]

<7> [480.924400] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [480.924815] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [480.925162] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3

<7> [480.925571] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [480.925835] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0

<7> [480.926136] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0

<7> [480.926371] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb (4037 - 4096) -> ( 0 - 0), size 59 -> 0

<7> [480.926617] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [480.926834] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [480.927049] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [480.927253] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [480.927490] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [480.927746] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000

<7> [480.927995] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000

<7> [480.928248] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0

<7> [480.928552] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz

<7> [480.928790] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated TC PLL 3

<7> [480.928995] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving TC PLL 3

<7> [480.929191] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset]

<7> [480.929402] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [480.929626] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0

<7> [480.929817] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [480.930000] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [480.930171] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [480.930335] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [480.930510] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [480.930668] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [480.930823] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [480.930828] xe 0000:03:00.0: scan mode: Underscan

<7> [480.930830] xe 0000:03:00.0: colorimetry: No Data

<7> [480.930831] xe 0000:03:00.0: picture aspect: No Data

<7> [480.930833] xe 0000:03:00.0: active aspect: Same as Picture

<7> [480.930837] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [480.930839] xe 0000:03:00.0: quantization range: Full

<7> [480.930840] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [480.930844] xe 0000:03:00.0: ycc quantization range: Full

<7> [480.930846] xe 0000:03:00.0: hdmi content type: Graphics

<7> [480.930849] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [480.930852] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [480.930856] xe 0000:03:00.0: product: Discrete gfx

<7> [480.930858] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [480.930860] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [480.930864] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 07 00 66 10 00 01 00 00 00 00 00 00 00 00

<7> [480.931017] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 05 e3 cd 0c 32 38 45 38 35 30 09 07 07 00 00 00

<7> [480.931160] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [480.931301] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [480.931442] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37

<7> [480.931578] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [480.931712] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [480.931843] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9

<7> [480.931975] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9

<7> [480.932103] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9

<7> [480.932226] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9

<7> [480.932348] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9

<7> [480.932477] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [480.932594] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [480.932708] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [480.932817] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [480.932929] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [480.933041] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [480.933151] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [480.933252] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [480.933354] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [480.933457] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8

<7> [480.933556] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [480.933652] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06

<7> [480.933746] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [480.933840] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [480.933932] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [480.934025] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [480.934116] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [480.934207] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400

<7> [480.934296] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [480.934388] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [480.934485] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [480.934576] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [480.934674] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [480.934771] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [480.934867] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [480.934962] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [480.935055] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [480.935148] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [480.935242] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [480.935334] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [480.935425] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [480.935530] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [480.935622] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [480.935713] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [480.935805] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [480.935898] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [480.935990] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no

<7> [480.936082] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no

<7> [480.936175] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no

<7> [480.936268] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no

<7> [480.936362] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no

<7> [480.936762] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:538:HDMI-A-3][ENCODER:537:DDI TC3/PHY H] Disable audio codec on [CRTC:268:pipe B]

<7> [480.966344] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe B

<7> [480.987576] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [480.988839] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x2, on? 1) for [CRTC:268:pipe B]

<7> [480.991380] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3

<7> [480.992291] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F]

<7> [480.992840] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A]

<7> [480.993317] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B]

<7> [480.993833] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C]

<7> [480.994301] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D]

<7> [480.994795] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G]

<7> [480.995260] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A]

<7> [480.995757] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B]

<7> [480.996215] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C]

<7> [480.996713] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D]

<7> [480.997184] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H]

<7> [480.997673] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I]

<7> [480.998128] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A]

<7> [480.998601] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B]

<7> [480.999069] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C]

<7> [480.999481] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D]

<7> [481.000121] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [481.000728] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [481.001263] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [481.002133] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [481.002697] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xaa000000)

<7> [481.003251] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [481.003776] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [481.004061] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]

<7> [481.022479] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [481.023233] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [481.023991] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [481.024740] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [482.340423] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [482.340614] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [482.344851] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [482.349364] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [482.349840] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [482.350502] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [482.351181] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [482.354625] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [482.365306] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [482.366971] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [482.368442] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [482.372554] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [482.373923] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [482.383343] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [482.383679] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [482.383772] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [482.389049] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.390908] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.392750] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.394599] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.396427] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.398422] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.400419] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.402426] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.406472] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.408460] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.410462] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.412304] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.414322] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.416323] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.418312] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.420315] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.422072] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [482.422089] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [482.422097] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [482.422105] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [482.422114] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [482.422122] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [482.422132] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [482.422142] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [482.422152] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [482.422192] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [482.422466] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [482.423888] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [482.424196] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [482.426828] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [482.427384] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [482.427546] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [482.427878] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [482.427964] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [482.427969] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [482.428054] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [482.429297] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [482.429300] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [482.429387] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [482.454223] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [482.454226] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [482.454229] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [482.454231] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [482.454233] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [482.454235] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [482.454238] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [482.454241] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [482.454243] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [482.454497] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [482.454596] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [482.454923] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [482.455012] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [482.455023] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [482.459218] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [482.531813] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [482.532673] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [482.533314] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [482.533985] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [482.534608] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [483.661388] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [483.662411] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [483.667318] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [483.671897] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [483.672518] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [483.673386] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [483.674224] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [483.677729] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [483.688325] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [483.690019] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [483.691466] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [483.695574] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [483.696940] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [483.706744] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [483.707146] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [483.707273] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [483.713364] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [483.715348] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [483.717359] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [483.719365] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [483.721229] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [483.723059] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [483.724899] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [483.726953] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [483.730713] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [483.732565] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [483.734582] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [483.736454] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [483.738293] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [483.740332] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [483.742171] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [483.744014] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [483.746268] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [483.746293] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [483.746304] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [483.746313] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [483.746322] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [483.746331] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [483.746343] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [483.746355] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [483.746366] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [483.746415] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [483.746831] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [483.748307] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [483.748688] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [483.751018] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [483.751589] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [483.751690] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [483.752028] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [483.752115] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [483.752119] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [483.752205] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [483.753446] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [483.753450] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [483.753542] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [483.778399] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [483.778403] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [483.778406] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [483.778408] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [483.778411] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [483.778414] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [483.778417] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [483.778420] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [483.778424] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [483.778677] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [483.778770] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [483.779107] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [483.779196] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [483.779207] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [483.783442] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [483.851891] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [483.852744] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [483.853416] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [483.854099] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [483.854761] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [485.186939] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [485.187339] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [485.191565] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [485.195917] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [485.196329] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [485.196755] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [485.197352] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [485.201271] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [485.215018] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [485.217206] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [485.219068] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [485.223540] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [485.225070] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [485.234517] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [485.234705] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [485.234888] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [485.241052] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [485.243008] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [485.245022] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [485.246951] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [485.248980] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [485.251002] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [485.253024] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [485.255054] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [485.259071] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [485.261110] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [485.263139] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [485.265112] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [485.267156] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [485.269111] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [485.271121] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [485.273115] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [485.274908] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [485.274923] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [485.274930] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [485.274936] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [485.274942] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [485.274949] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [485.274957] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [485.274965] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [485.274973] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [485.275004] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [485.275259] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [485.277009] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [485.277165] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [485.279950] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [485.280446] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [485.280539] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [485.280988] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [485.281119] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [485.281124] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [485.281256] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [485.282661] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [485.282665] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [485.282774] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [485.308069] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [485.308073] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [485.308076] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [485.308078] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [485.308081] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [485.308083] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [485.308086] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [485.308089] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [485.308091] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [485.308255] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [485.308346] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [485.308800] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [485.308938] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [485.308956] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [485.313109] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [485.388080] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [485.389100] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [485.389975] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [485.390798] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [485.391618] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [486.910097] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [486.910694] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [486.915566] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [486.920171] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [486.920991] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [486.921872] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [486.922698] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [486.927358] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [486.941896] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [486.944290] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [486.946240] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [486.951750] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [486.953599] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [486.964844] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [486.965076] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [486.965302] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [486.971690] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [486.973694] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [486.975644] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [486.977560] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [486.979507] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [486.981430] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [486.983432] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [486.985398] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [486.989548] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [486.991495] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [486.993498] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [486.995442] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [486.997363] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [486.999310] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [487.001241] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [487.003275] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [487.005036] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [487.005051] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [487.005058] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [487.005063] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [487.005068] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [487.005074] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [487.005081] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [487.005088] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [487.005094] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [487.005124] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [487.005385] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [487.007116] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [487.007323] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [487.010201] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [487.010733] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [487.010825] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [487.011282] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [487.011370] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [487.011375] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [487.011463] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [487.012805] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [487.012808] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [487.012910] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [487.038641] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [487.038644] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [487.038647] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [487.038649] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [487.038651] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [487.038653] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [487.038657] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [487.038659] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [487.038662] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [487.038819] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [487.038924] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [487.039356] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [487.039443] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [487.039454] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [487.043594] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [487.116179] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [487.117172] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [487.118142] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [487.119076] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [487.120014] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [488.231949] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [488.232541] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [488.237239] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [488.241924] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [488.242577] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [488.243374] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [488.244104] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [488.248762] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [488.262824] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [488.265197] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [488.267134] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [488.272981] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [488.274780] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [488.284952] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [488.285176] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [488.285377] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [488.291709] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [488.293654] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [488.295570] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [488.297504] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [488.299465] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [488.301469] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [488.303435] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [488.305450] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [488.309547] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [488.311556] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [488.313523] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [488.315450] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [488.317433] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [488.319451] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [488.321385] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [488.323426] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [488.325269] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [488.325287] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [488.325296] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [488.325304] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [488.325312] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [488.325320] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [488.325331] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [488.325341] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [488.325350] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [488.325378] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [488.325597] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [488.327268] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [488.327498] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [488.330373] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [488.330942] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [488.331035] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [488.331471] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [488.331561] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [488.331565] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [488.331656] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [488.333014] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [488.333018] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [488.333107] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [488.358577] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [488.358581] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [488.358583] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [488.358586] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [488.358588] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [488.358590] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [488.358593] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [488.358596] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [488.358599] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [488.358955] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [488.359045] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [488.359484] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [488.359570] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [488.359581] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [488.363805] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [488.436233] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [488.437207] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [488.438014] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [488.438750] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [488.439533] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [489.758998] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [489.759113] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [489.763258] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [489.767735] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [489.768230] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [489.768835] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [489.769543] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [489.773832] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [489.788398] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [489.790650] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [489.792564] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [489.797647] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [489.799374] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [489.809555] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [489.809753] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [489.809925] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [489.816118] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [489.818139] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [489.820174] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [489.822196] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [489.824217] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [489.826245] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [489.828261] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [489.830286] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [489.834359] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [489.836341] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [489.838320] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [489.840284] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [489.842209] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [489.844270] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [489.846304] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [489.848251] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [489.850078] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [489.850093] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [489.850099] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [489.850104] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [489.850109] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [489.850114] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [489.850120] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [489.850126] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [489.850133] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [489.850161] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [489.850403] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [489.852108] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [489.852296] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [489.855131] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [489.855667] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [489.855762] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [489.856201] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [489.856291] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [489.856295] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [489.856381] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [489.857730] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [489.857734] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [489.857823] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [489.882786] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [489.882789] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [489.882792] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [489.882794] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [489.882796] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [489.882798] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [489.882801] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [489.882804] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [489.882807] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [489.883176] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [489.883272] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [489.883716] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [489.883803] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [489.883815] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [489.887957] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [489.956309] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [489.957291] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [489.958100] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [489.958836] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [489.959711] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [491.077434] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [491.078038] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [491.082883] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [491.087475] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [491.088213] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [491.089088] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [491.089962] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [491.094685] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [491.108974] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [491.111341] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [491.113294] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [491.118521] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [491.120333] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [491.132245] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [491.132486] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [491.132725] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [491.139176] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [491.141214] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [491.143240] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [491.145274] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [491.147330] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [491.149355] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [491.151389] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [491.153434] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [491.157662] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [491.159589] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [491.161507] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [491.163452] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [491.165493] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [491.167458] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [491.169483] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [491.171481] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [491.173320] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [491.173332] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [491.173337] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [491.173342] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [491.173346] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [491.173351] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [491.173357] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [491.173362] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [491.173367] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [491.173391] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [491.173599] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [491.175312] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [491.175484] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [491.178300] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [491.178813] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [491.178908] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [491.179340] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [491.179430] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [491.179435] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [491.179521] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [491.180867] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [491.180871] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [491.180958] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [491.206186] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [491.206189] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [491.206191] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [491.206194] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [491.206196] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [491.206198] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [491.206201] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [491.206204] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [491.206206] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [491.206574] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [491.206667] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [491.207107] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [491.207193] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [491.207205] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [491.211432] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [491.284338] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [491.285337] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [491.286327] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [491.287275] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [491.288205] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [492.500166] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [492.501309] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [492.505976] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [492.510909] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [492.511591] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [492.512359] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [492.513089] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [492.517686] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [492.532055] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [492.534260] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [492.536242] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [492.541885] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [492.543451] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [492.553165] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [492.553361] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [492.553546] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [492.559858] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.561773] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.563702] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.565629] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.567564] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.569475] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.571498] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.573702] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.577743] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.579693] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.581616] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.583856] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.586055] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.588048] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.590055] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.592076] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [492.593886] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [492.593902] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [492.593908] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [492.593913] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [492.593919] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [492.593924] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [492.593931] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [492.593938] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [492.593944] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [492.593973] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [492.594273] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [492.596055] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [492.596298] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [492.599193] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [492.599756] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [492.599848] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [492.600279] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [492.600375] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [492.600379] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [492.600468] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [492.601866] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [492.601870] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [492.601959] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [492.627167] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [492.627172] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [492.627174] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [492.627176] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [492.627179] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [492.627181] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [492.627184] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [492.627187] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [492.627189] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [492.627342] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [492.627435] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [492.627878] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [492.627965] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [492.627977] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [492.632094] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [492.700433] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [492.701433] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [492.702188] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [492.702926] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [492.703707] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [493.822258] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [493.822623] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [493.826829] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [493.831349] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [493.831828] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [493.832533] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [493.833240] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [493.837359] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [493.847927] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [493.849788] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [493.851277] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [493.855167] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [493.856588] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [493.866238] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [493.866601] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [493.866750] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [493.872685] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.874505] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.876504] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.878358] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.880249] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.882192] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.884236] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.886094] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.890007] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.891994] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.893994] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.895835] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.897699] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.899528] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.901427] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.903540] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [493.905101] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [493.905125] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [493.905135] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [493.905143] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [493.905152] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [493.905160] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [493.905171] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [493.905181] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [493.905192] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [493.905269] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [493.905603] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [493.907037] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [493.907381] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [493.909644] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [493.910191] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [493.910301] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [493.910642] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [493.910731] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [493.910735] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [493.910827] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [493.912075] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [493.912079] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [493.912168] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [493.937024] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [493.937028] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [493.937030] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [493.937032] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [493.937035] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [493.937037] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [493.937040] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [493.937043] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [493.937046] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [493.937304] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [493.937415] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [493.937749] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [493.937835] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [493.937847] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [493.941957] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [493.946512] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [493.946634] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [493.946742] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [493.946848] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A]

<7> [493.946952] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [493.947059] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [493.947156] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2

<7> [493.947332] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [493.947434] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [493.947530] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [493.947632] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A]

<7> [493.947732] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [493.947830] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [493.947928] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2

<7> [493.948050] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [493.948133] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [493.948290] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [493.948389] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [493.948486] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [493.948586] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A]

<7> [493.948686] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [493.948785] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [493.948884] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2

<7> [493.948992] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [493.949074] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [493.949174] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037

<7> [493.949266] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59

<7> [493.949342] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [493.949415] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0

<7> [493.949487] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255

<7> [493.949560] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267

<7> [493.949653] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 594000 num active planes 1

<7> [493.949754] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000

<7> [493.949855] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000

<7> [493.949951] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624

<7> [493.950059] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz

<7> [493.950170] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated TC PLL 2

<7> [493.950271] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving TC PLL 2

<7> [493.950366] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset]

<7> [493.950469] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [493.950569] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0

<7> [493.950664] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [493.950758] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [493.950851] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [493.950945] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [493.951038] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64

<7> [493.951130] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [493.951226] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [493.951319] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [493.951410] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [493.951503] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [493.951598] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [493.951695] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00

<7> [493.951789] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11

<7> [493.951883] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00

<7> [493.951975] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [493.952068] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [493.952161] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36

<7> [493.952267] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125

<7> [493.952358] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [493.952450] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [493.952543] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [493.952635] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [493.952729] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [493.952821] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [493.952917] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [493.953014] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [493.953108] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [493.953205] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [493.953300] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [493.953394] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [493.953488] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [493.953580] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000

<7> [493.953673] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [493.953765] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c

<7> [493.953856] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110

<7> [493.953946] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c

<7> [493.954043] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1

<7> [493.954139] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a

<7> [493.954242] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81

<7> [493.954335] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000

<7> [493.954429] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001

<7> [493.954522] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000

<7> [493.954614] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [493.954706] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000

<7> [493.954797] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00

<7> [493.954890] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [493.954984] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [493.955075] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [493.955166] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [493.955266] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [493.955357] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [493.955448] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [493.955540] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [493.955631] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [493.955722] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [493.955813] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [493.955905] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [493.955994] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [493.956084] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [493.956176] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [493.956282] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [493.956375] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no

<7> [493.956466] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no

<7> [493.956557] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no

<7> [493.956655] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no

<7> [493.956749] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no

<7> [493.957322] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [493.957466] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000)

<7> [493.957566] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [493.957908] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F]

<7> [493.957999] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A]

<7> [493.958085] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B]

<7> [493.958171] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C]

<7> [493.958264] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D]

<7> [493.958350] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G]

<7> [493.958433] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A]

<7> [493.958515] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B]

<7> [493.958596] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C]

<7> [493.958677] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D]

<7> [493.958760] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H]

<7> [493.958844] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I]

<7> [493.958926] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A]

<7> [493.959007] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B]

<7> [493.959088] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C]

<7> [493.959170] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D]

<7> [493.959469] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [493.959633] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [493.959915] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [493.960018] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:150:pipe A]

<7> [493.960112] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2

<7> [493.965285] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [493.970350] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [493.971420] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [493.971868] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a

<7> [493.973436] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [493.974027] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1

<7> [493.981138] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Clock recovery OK

<7> [493.981440] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3

<7> [493.989185] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful

<7> [493.989614] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4

<7> [493.991054] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [494.009002] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G] Enable audio codec on [CRTC:150:pipe A], 40 bytes ELD

<7> [494.025701] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:526:DP-2]

<7> [494.026496] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A]

<7> [494.031951] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [494.032493] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [494.033013] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B]

<7> [494.033521] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [494.033999] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [494.034467] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3

<7> [494.035109] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [494.035513] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [494.035886] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B]

<7> [494.036253] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [494.036593] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [494.036920] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3

<7> [494.037391] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [494.037681] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [494.037966] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B]

<7> [494.038266] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [494.038570] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [494.038832] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3

<7> [494.039126] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [494.039369] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [494.039560] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [494.039915] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [494.040138] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [494.040382] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B]

<7> [494.040601] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [494.040805] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [494.041011] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3

<7> [494.041249] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [494.041417] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [494.041571] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [494.041763] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989

<7> [494.041902] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59

<7> [494.042037] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989

<7> [494.042159] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59

<7> [494.042312] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [494.042439] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0

<7> [494.042560] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255

<7> [494.042683] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267

<7> [494.042824] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 594000 num active planes 1

<7> [494.042985] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000

<7> [494.043132] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000

<7> [494.043289] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248

<7> [494.043448] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz

<7> [494.043600] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated TC PLL 3

<7> [494.043735] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving TC PLL 3

<7> [494.043864] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset]

<7> [494.044002] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [494.044135] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0

<7> [494.044270] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [494.044392] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [494.044511] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [494.044627] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [494.044737] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [494.044846] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [494.044954] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [494.044957] xe 0000:03:00.0: scan mode: Underscan

<7> [494.044958] xe 0000:03:00.0: colorimetry: No Data

<7> [494.044960] xe 0000:03:00.0: picture aspect: No Data

<7> [494.044961] xe 0000:03:00.0: active aspect: Same as Picture

<7> [494.044963] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [494.044964] xe 0000:03:00.0: quantization range: Full

<7> [494.044966] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [494.044968] xe 0000:03:00.0: ycc quantization range: Full

<7> [494.044969] xe 0000:03:00.0: hdmi content type: Graphics

<7> [494.044972] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [494.044973] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [494.044976] xe 0000:03:00.0: product: Discrete gfx

<7> [494.044977] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [494.044979] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [494.044982] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 07 00 66 10 00 01 00 00 00 00 00 00 00 00

<7> [494.045089] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 05 e3 cd 0c 32 38 45 38 35 30 09 07 07 00 00 00

<7> [494.045188] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [494.045328] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [494.045425] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37

<7> [494.045524] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [494.045624] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [494.045720] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9

<7> [494.045816] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9

<7> [494.045909] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9

<7> [494.046002] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9

<7> [494.046095] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9

<7> [494.046187] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [494.046294] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [494.046385] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [494.046477] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [494.046570] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [494.046662] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [494.046755] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [494.046847] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [494.046938] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [494.047029] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8

<7> [494.047122] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [494.047218] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06

<7> [494.047309] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [494.047399] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [494.047490] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [494.047580] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [494.047671] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [494.047761] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400

<7> [494.047860] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [494.047958] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [494.048051] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [494.048149] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [494.048249] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [494.048343] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [494.048434] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [494.048526] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [494.048618] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [494.048710] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [494.048805] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [494.048898] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [494.048994] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [494.049084] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [494.049177] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [494.049280] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [494.049371] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [494.049463] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [494.049557] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [494.049653] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no

<7> [494.049747] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no

<7> [494.049838] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no

<7> [494.049930] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no

<7> [494.050021] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no

<7> [494.050628] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [494.050773] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000)

<7> [494.051091] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F]

<7> [494.051182] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A]

<7> [494.051284] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B]

<7> [494.051373] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C]

<7> [494.051459] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D]

<7> [494.051554] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G]

<7> [494.051638] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A]

<7> [494.051721] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B]

<7> [494.051803] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C]

<7> [494.051884] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D]

<7> [494.051971] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H]

<7> [494.052055] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I]

<7> [494.052136] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A]

<7> [494.052218] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B]

<7> [494.052297] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C]

<7> [494.052377] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D]

<7> [494.058508] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [494.058828] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A)

<7> [494.075435] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x2, on? 0) for [CRTC:268:pipe B]

<7> [494.075591] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3

<7> [494.078402] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe B

<7> [494.092323] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [494.097106] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:538:HDMI-A-3][ENCODER:537:DDI TC3/PHY H] Enable audio codec on [CRTC:268:pipe B], 32 bytes ELD

<7> [494.113695] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000)

<7> [494.114251] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N

<7> [494.115157] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [494.115941] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]

<6> [494.122876] [IGT] xe_pm: finished subtest d3hot-mmap-vram, SUCCESS

<7> [494.143327] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0

<6> [494.164557] Console: switching to colour frame buffer device 240x67

Results for igt@xe_pm@d3hot-mmap-vram