Result:
igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0
| Detail | Value |
|---|---|
| Duration | 1.35 seconds |
| Igt-Version |
IGT-Version: 2.3-g028b10060 (x86_64) (Linux: 6.19.0-lgci-xe-xe-4571-c8daef66f8603b621-debug+ x86_64) |
| Out |
Using IGT_SRANDOM=1771385141 for randomisation Starting subtest: load Opened device: /dev/dri/card0 Subtest load: SUCCESS (1.349s) |
| Err |
Starting subtest: load Subtest load: SUCCESS (1.349s) |
| Dmesg |
<6> [165.383744] [IGT] xe_module_load: executing
<4> [165.383790] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030
<6> [165.388294] [IGT] xe_module_load: starting subtest load
<6> [165.542230] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:05:00.0
<4> [165.542239] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [165.542241] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000
<4> [165.542243] nvme 0000:05:00.0: [ 0] RxErr (First)
<5> [165.731143] Setting dangerous option force_probe - tainting kernel
<6> [165.734457] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [165.736164] xe 0000:03:00.0: [drm] Running in SR-IOV PF mode
<7> [165.736200] xe 0000:03:00.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error
<6> [165.736849] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [165.736860] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE G21 e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [165.736976] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [165.737075] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [165.737180] xe 0000:03:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<6> [165.740628] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000005400000000, 0x0000000400000000
<6> [165.740742] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [165.740744] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000005400000000-56fb800000]
<6> [165.740745] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [165.740747] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000005400000000-56fb800000]
<7> [165.740875] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [165.741017] xe 0000:03:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [165.741139] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [165.741465] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [165.741572] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [165.741678] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [165.741791] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [165.741897] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [165.742015] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [165.742330] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [165.742458] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [165.742574] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [165.742682] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [165.742989] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [165.743363] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [165.757256] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [165.757369] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [165.757475] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [165.757578] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [165.757678] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [165.757775] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [165.757873] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 850)
<7> [165.757983] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [165.758084] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [165.758189] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [165.758287] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [165.758385] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [165.758481] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [165.758585] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [165.758686] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [165.758780] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [165.758873] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [165.758971] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [165.759068] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [165.759162] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [165.759257] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [165.759353] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [165.759453] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [165.759549] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [165.759645] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [165.759740] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [165.759839] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [165.759938] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [165.760050] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [165.760150] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [165.760486] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [165.760637] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [165.760983] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [165.761160] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [165.761545] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [165.761652] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [165.761963] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [165.762097] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [165.762425] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [165.762754] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [165.762865] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [165.762990] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [165.763092] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [165.763404] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [165.763505] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [165.763994] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [165.764494] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [165.764946] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [165.765840] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [165.765969] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [165.766077] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [165.766179] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 130 (130.0 usec)
<7> [165.766275] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 130 (130.0 usec)
<7> [165.766373] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [165.766469] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [165.766561] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [165.766649] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [165.766737] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [165.766824] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [165.766910] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 130 (130.0 usec)
<7> [165.767007] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 130 (130.0 usec)
<7> [165.767101] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [165.767195] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [165.767285] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [165.767372] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [165.768151] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [165.768282] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [165.768396] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [165.768508] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [165.768614] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [165.768717] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [165.768820] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [165.768918] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [165.769025] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [165.769161] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [165.769310] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [165.769469] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [165.769611] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [165.769768] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [165.769927] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [165.770099] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [165.770241] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [165.770383] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [165.770517] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [165.770658] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [165.770796] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [165.770927] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [165.771080] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [165.771230] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [165.771368] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [165.771497] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [165.771642] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [165.771779] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [165.771921] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [165.772075] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<6> [165.782600] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [165.783090] xe 0000:03:00.0: [drm:intel_crtc_init [xe]] 4 display pipes available.
<7> [165.788692] xe 0000:03:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [165.788831] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [165.788948] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [165.789310] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:506:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [165.789500] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:506:DDI TC1/PHY F]
<7> [165.790079] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:506:DDI TC1/PHY F]
<7> [165.790197] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:506:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [165.790780] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:525:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [165.790951] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:525:DDI TC2/PHY G]
<7> [165.791324] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:525:DDI TC2/PHY G]
<7> [165.791482] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:525:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [165.791899] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:537:DDI TC3/PHY H]
<7> [165.792037] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:537:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [165.792431] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:541:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [165.792567] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:541:DDI TC4/PHY I]
<7> [165.792851] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:541:DDI TC4/PHY I]
<7> [165.792953] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:541:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [165.793503] xe 0000:03:00.0: [drm:intel_vga_disable [xe]] VGA plane is disabled
<7> [165.793666] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:150:pipe A] hw state readout: disabled
<7> [165.794029] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled
<7> [165.794168] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:386:pipe C] hw state readout: disabled
<7> [165.794506] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:504:pipe D] hw state readout: disabled
<7> [165.794605] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A
<7> [165.794700] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:64:plane 2A] hw state readout: disabled, pipe A
<7> [165.795050] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 3A] hw state readout: disabled, pipe A
<7> [165.795156] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:124:plane 4A] hw state readout: disabled, pipe A
<7> [165.795475] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:134:plane 5A] hw state readout: disabled, pipe A
<7> [165.795574] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:144:cursor A] hw state readout: disabled, pipe A
<7> [165.795670] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B
<7> [165.795973] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B
<7> [165.796065] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B
<7> [165.796157] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B
<7> [165.796450] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B
<7> [165.796541] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B
<7> [165.796633] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:270:plane 1C] hw state readout: disabled, pipe C
<7> [165.796932] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:300:plane 2C] hw state readout: disabled, pipe C
<7> [165.797041] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:330:plane 3C] hw state readout: disabled, pipe C
<7> [165.797138] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:360:plane 4C] hw state readout: disabled, pipe C
<7> [165.797432] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:370:plane 5C] hw state readout: disabled, pipe C
<7> [165.797523] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:380:cursor C] hw state readout: disabled, pipe C
<7> [165.797614] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:388:plane 1D] hw state readout: disabled, pipe D
<7> [165.797905] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:418:plane 2D] hw state readout: disabled, pipe D
<7> [165.798006] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:448:plane 3D] hw state readout: disabled, pipe D
<7> [165.798098] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:478:plane 4D] hw state readout: disabled, pipe D
<7> [165.798392] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:488:plane 5D] hw state readout: disabled, pipe D
<7> [165.798482] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:498:cursor D] hw state readout: disabled, pipe D
<7> [165.798579] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:506:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [165.798676] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:508:DP-MST A] hw state readout: disabled, pipe A
<7> [165.798768] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DP-MST B] hw state readout: disabled, pipe B
<7> [165.798857] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:510:DP-MST C] hw state readout: disabled, pipe C
<7> [165.798945] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:511:DP-MST D] hw state readout: disabled, pipe D
<7> [165.799252] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:525:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [165.799341] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:527:DP-MST A] hw state readout: disabled, pipe A
<7> [165.799427] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST B] hw state readout: disabled, pipe B
<7> [165.799514] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:529:DP-MST C] hw state readout: disabled, pipe C
<7> [165.799601] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:530:DP-MST D] hw state readout: disabled, pipe D
<7> [165.799896] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:537:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [165.799995] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:541:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [165.800088] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:543:DP-MST A] hw state readout: disabled, pipe A
<7> [165.800186] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DP-MST B] hw state readout: disabled, pipe B
<7> [165.800280] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:545:DP-MST C] hw state readout: disabled, pipe C
<7> [165.800369] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:546:DP-MST D] hw state readout: disabled, pipe D
<7> [165.800459] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0
<7> [165.800574] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [165.800681] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1
<7> [165.801000] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [165.801110] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0
<7> [165.801213] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0
<7> [165.801519] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0
<7> [165.801637] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:507:DP-1] hw state readout: disabled
<7> [165.801965] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:520:HDMI-A-1] hw state readout: disabled
<7> [165.802074] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:526:DP-2] hw state readout: disabled
<7> [165.802181] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:534:HDMI-A-2] hw state readout: disabled
<7> [165.802487] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:538:HDMI-A-3] hw state readout: disabled
<7> [165.802586] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:542:DP-3] hw state readout: disabled
<7> [165.802681] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:550:HDMI-A-4] hw state readout: disabled
<7> [165.802771] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:34:plane 1A] min_cdclk 0 kHz
<7> [165.802864] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:64:plane 2A] min_cdclk 0 kHz
<7> [165.802953] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 3A] min_cdclk 0 kHz
<7> [165.803083] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:124:plane 4A] min_cdclk 0 kHz
<7> [165.803180] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:134:plane 5A] min_cdclk 0 kHz
<7> [165.803275] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:144:cursor A] min_cdclk 0 kHz
<7> [165.803365] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:150:pipe A] min_cdclk 0 kHz
<7> [165.803455] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz
<7> [165.803544] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz
<7> [165.803631] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz
<7> [165.803720] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz
<7> [165.803808] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz
<7> [165.803899] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz
<7> [165.804012] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz
<7> [165.804104] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:270:plane 1C] min_cdclk 0 kHz
<7> [165.804192] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:300:plane 2C] min_cdclk 0 kHz
<7> [165.804281] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:330:plane 3C] min_cdclk 0 kHz
<7> [165.804370] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:360:plane 4C] min_cdclk 0 kHz
<7> [165.804459] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:370:plane 5C] min_cdclk 0 kHz
<7> [165.804553] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:380:cursor C] min_cdclk 0 kHz
<7> [165.804650] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:386:pipe C] min_cdclk 0 kHz
<7> [165.804743] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:388:plane 1D] min_cdclk 0 kHz
<7> [165.804834] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:418:plane 2D] min_cdclk 0 kHz
<7> [165.804922] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:448:plane 3D] min_cdclk 0 kHz
<7> [165.805020] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:478:plane 4D] min_cdclk 0 kHz
<7> [165.805110] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:488:plane 5D] min_cdclk 0 kHz
<7> [165.805206] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:498:cursor D] min_cdclk 0 kHz
<7> [165.805298] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:504:pipe D] min_cdclk 0 kHz
<7> [165.805594] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:150:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [165.805700] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [165.805804] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:386:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [165.805900] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:504:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [165.806006] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [165.806131] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [165.806247] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [165.806357] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [165.806689] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [165.806872] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: no [setup_hw_state]
<7> [165.806994] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state]
<7> [165.807106] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:386:pipe C] enable: no [setup_hw_state]
<7> [165.807212] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:504:pipe D] enable: no [setup_hw_state]
<7> [165.807314] xe 0000:03:00.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling
<6> [165.812638] xe 0000:03:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.58.0
<7> [165.815860] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x006603f7
<7> [165.815963] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [165.816051] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [165.816131] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [165.816209] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000eea
<7> [165.816286] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [165.816361] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [165.816437] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [165.816511] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [165.816585] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [165.816662] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [165.816738] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [165.816812] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [165.816884] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [165.816963] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [165.817083] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [165.827969] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [165.828742] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [165.828998] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,000fffff
<7> [165.829095] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,000fffff
<7> [165.829179] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [165.829263] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [165.829345] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [165.914488] xe 0000:03:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [165.914491] xe 0000:03:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [165.914669] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [165.914769] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6217]: allow rw access
<7> [165.914871] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62af]: allow rw access
<7> [165.914974] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [165.915070] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [165.915157] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [165.915273] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [165.915382] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [165.915503] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [165.915583] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [165.915668] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [165.915747] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [165.915876] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [165.915952] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [165.916159] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [165.916285] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [165.917881] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [165.917982] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [165.918083] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [165.918171] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440
<7> [165.918260] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [165.918345] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [165.918427] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [165.918508] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [165.918591] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [165.918671] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [165.918750] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [165.918828] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [165.918903] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [165.918989] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [165.919091] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [165.919169] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [165.919247] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [165.919321] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [165.919397] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [165.919478] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [165.919554] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [165.919629] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [165.919701] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [165.919773] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [165.919846] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [165.919918] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [165.920021] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [165.920117] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [165.920199] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [165.920278] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210
<7> [165.920354] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8
<7> [165.920431] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc
<7> [165.920506] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01
<7> [165.920581] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c
<7> [165.920658] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [165.920736] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [165.920822] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [165.920912] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [165.921012] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [165.921103] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [165.921189] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [165.921273] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [165.921354] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [165.921845] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [165.921933] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [165.922033] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [165.922117] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [165.922598] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [165.922686] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [165.922767] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [165.922847] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [165.923152] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [165.923238] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [165.923326] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [165.923411] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [165.923497] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [165.923585] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [165.923668] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [165.923993] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [165.924078] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [165.924160] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [165.924241] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [165.924321] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [165.924400] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [165.924481] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [165.925204] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [165.929253] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x010823f7
<7> [165.929353] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [165.929440] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [165.929522] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [165.929603] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x0000232e
<7> [165.929684] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [165.929761] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [165.929836] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [165.929909] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [165.929994] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [165.930081] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [165.930165] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [165.930237] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [165.930310] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [165.930408] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [165.930573] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [165.932553] xe 0000:03:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0x627000 for xe_guc_buf_cache_init_with_size [xe]
<7> [165.934248] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [165.935257] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [165.955879] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 49152)
<7> [165.966016] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [165.966320] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [165.967124] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4140 dwords
<7> [165.967260] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [165.967350] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140
<7> [165.967433] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [165.967518] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [165.967599] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [165.967679] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [165.967762] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [165.967847] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [165.967934] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000
<7> [165.970485] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [165.970579] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [165.970662] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [165.973039] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [165.973145] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [165.976715] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [165.977974] xe 0000:03:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.58.0
<7> [165.980101] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x01a1c3f7
<7> [165.980203] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [165.980291] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [165.980375] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [165.980455] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00003662
<7> [165.980532] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [165.980610] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [165.980686] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [165.980762] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [165.980838] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [165.980912] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [165.981010] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [165.981088] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [165.981164] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [165.982749] xe 0000:03:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [165.983232] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [165.983365] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [165.993967] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [165.994316] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [165.994436] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000,00000000
<7> [165.994537] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000,00000000
<7> [165.994632] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [165.994724] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [165.994815] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [165.994911] xe 0000:03:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [165.994913] xe 0000:03:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [165.994914] xe 0000:03:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [165.994916] xe 0000:03:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [165.994917] xe 0000:03:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [165.994918] xe 0000:03:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [165.994919] xe 0000:03:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [165.994920] xe 0000:03:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [165.994923] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [165.995184] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [165.995307] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [165.995425] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [165.995532] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [165.995639] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [165.995740] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [165.995840] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [165.995942] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [165.996050] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [165.996144] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [165.996331] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [165.996426] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [165.996520] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [165.996610] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [165.996700] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [165.996782] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [165.996864] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [165.996947] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [165.997041] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [165.997131] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [165.997304] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [165.997388] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [165.997473] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [165.997556] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [165.997640] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [165.997720] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [165.997801] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [165.997886] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [165.997979] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [165.998064] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [165.998238] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [165.998318] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [165.998406] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [165.998493] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [165.998579] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [165.998659] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [165.998741] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [165.998822] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [165.998902] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [165.998993] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [166.000484] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [166.000577] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [166.000667] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xc50c] = 0x00010002
<7> [166.000761] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [166.000846] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [166.000931] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [166.001027] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [166.001115] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [166.001206] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [166.001292] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [166.001374] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [166.001456] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [166.001535] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [166.001615] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [166.001696] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [166.001781] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [166.001861] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [166.001938] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [166.002029] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [166.002104] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [166.002179] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [166.002253] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [166.002327] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [166.002406] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [166.002486] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [166.002564] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [166.002656] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [166.002745] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [166.002831] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c
<7> [166.002919] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1
<7> [166.003014] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0
<7> [166.003098] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c
<7> [166.003178] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1
<7> [166.003256] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0
<7> [166.003334] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c
<7> [166.003414] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1
<7> [166.003498] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0
<7> [166.003711] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [166.003795] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [166.003874] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [166.003952] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d0] = 0x1039319c
<7> [166.004044] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d4] = 0x103931a1
<7> [166.004120] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d8] = 0x003931d0
<7> [166.004195] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04dc] = 0x1039419c
<7> [166.004270] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e0] = 0x103941a1
<7> [166.004349] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e4] = 0x003941d0
<7> [166.004430] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e8] = 0x1039499c
<7> [166.004507] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04ec] = 0x103949a1
<7> [166.004584] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04f0] = 0x003949d0
<7> [166.004781] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [166.004870] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [166.004961] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [166.005044] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c
<7> [166.005122] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1
<7> [166.005199] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0
<7> [166.005276] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c
<7> [166.005351] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1
<7> [166.005429] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0
<7> [166.005515] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c
<7> [166.005594] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1
<7> [166.005671] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0
<7> [166.005877] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [166.005977] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [166.006064] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [166.006146] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d0] = 0x1039319c
<7> [166.006223] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d4] = 0x103931a1
<7> [166.006300] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d8] = 0x003931d0
<7> [166.006376] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84dc] = 0x1039419c
<7> [166.006452] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e0] = 0x103941a1
<7> [166.006528] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e4] = 0x003941d0
<7> [166.006604] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e8] = 0x1039499c
<7> [166.006679] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84ec] = 0x103949a1
<7> [166.006755] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84f0] = 0x003949d0
<7> [166.007199] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [166.010105] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x024453f7
<7> [166.010196] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [166.010280] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [166.010360] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [166.010441] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004ab4
<7> [166.010521] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [166.010600] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [166.010675] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [166.010748] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [166.010822] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [166.010894] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [166.010974] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [166.011047] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [166.011117] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [166.011210] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [166.011311] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [166.012530] xe 0000:03:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x1a1c000 for xe_guc_buf_cache_init_with_size [xe]
<7> [166.030342] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 49152)
<7> [166.040966] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [166.041290] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [166.041697] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [166.041786] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [166.043301] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [166.043402] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [166.055092] xe 0000:03:00.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC
<7> [166.055610] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [166.055843] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [166.056084] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [166.056301] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [166.058795] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [166.059032] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [166.059755] xe 0000:03:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [166.059859] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [166.060123] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [166.060409] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [166.060527] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [166.061175] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 0: start 0x90008
<7> [166.061303] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 1: start 0x90108
<7> [166.061425] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 2: start 0x90208
<7> [166.061576] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 3: start 0x90308
<7> [166.061680] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 4: start 0x903c8
<7> [166.061781] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008
<7> [166.061884] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108
<7> [166.062037] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208
<7> [166.062157] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308
<7> [166.062252] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8
<7> [166.062356] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 0: start 0x52008
<7> [166.062455] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 1: start 0x52108
<7> [166.062564] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 2: start 0x52208
<7> [166.062671] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 3: start 0x52308
<7> [166.062780] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 4: start 0x523c8
<7> [166.062883] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 0: start 0x59008
<7> [166.062993] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 1: start 0x59108
<7> [166.063097] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 2: start 0x59208
<7> [166.063196] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 3: start 0x59308
<7> [166.063295] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 4: start 0x593c8
<7> [166.063585] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no
<7> [166.063731] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [166.063869] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [166.063999] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [166.064154] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: no [fastset]
<7> [166.064272] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset]
<7> [166.064401] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:386:pipe C] enable: no [fastset]
<7> [166.064552] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:504:pipe D] enable: no [fastset]
<7> [166.065333] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff30f2 0x28d32a71)
<7> [166.065790] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [166.066028] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A]
<7> [166.066351] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]
<7> [166.066558] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:386:pipe C]
<7> [166.066785] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [166.066826] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:504:pipe D]
<7> [166.067063] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03010 0x28d00071)
<7> [166.067291] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<5> [166.068298] Creating 4 MTD partitions on "xe.nvm.768":
<5> [166.068310] 0x000000000000-0x000000001000 : "xe.nvm.768.DESCRIPTOR"
<7> [166.070004] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:507:DP-1] adding connector to sysfs
<7> [166.071364] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1
<5> [166.072346] 0x000000001000-0x00000054e000 : "xe.nvm.768.GSC"
<7> [166.072679] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:507:DP-1] generating connector hotplug event
<7> [166.072755] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:520:HDMI-A-1] adding connector to sysfs
<7> [166.073220] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:520:HDMI-A-1] generating connector hotplug event
<7> [166.073292] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:526:DP-2] adding connector to sysfs
<7> [166.073850] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2
<7> [166.074843] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:526:DP-2] generating connector hotplug event
<7> [166.074887] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:534:HDMI-A-2] adding connector to sysfs
<7> [166.075200] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:534:HDMI-A-2] generating connector hotplug event
<7> [166.075240] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:538:HDMI-A-3] adding connector to sysfs
<7> [166.075523] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:538:HDMI-A-3] generating connector hotplug event
<7> [166.075563] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:542:DP-3] adding connector to sysfs
<7> [166.076033] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3
<5> [166.077707] 0x00000054e000-0x00000074e000 : "xe.nvm.768.OptionROM"
<7> [166.078438] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:542:DP-3] generating connector hotplug event
<7> [166.078512] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:550:HDMI-A-4] adding connector to sysfs
<7> [166.079237] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:550:HDMI-A-4] generating connector hotplug event
<7> [166.080309] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [166.081446] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<6> [166.085012] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0
<7> [166.085118] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [166.085260] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<7> [166.087874] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:150:pipe A] not active, skipping
<7> [166.088039] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping
<7> [166.088142] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:386:pipe C] not active, skipping
<7> [166.088236] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:504:pipe D] not active, skipping
<7> [166.088334] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [166.088520] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]
<5> [166.088822] 0x00000074e000-0x00000075e000 : "xe.nvm.768.DAM"
<6> [166.089213] mei_lb xe.mei-gscfi.768-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:03:00.0 (ops xe_late_bind_component_ops [xe])
<7> [166.089648] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [166.091331] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [166.093280] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:507:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [166.093862] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]
<7> [166.098320] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:520:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [166.098800] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]
<7> [166.103373] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:526:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [166.103513] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]
<7> [166.109080] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:534:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [166.109381] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]
<7> [166.113742] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:538:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [166.114014] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]
<7> [166.118507] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:542:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [166.118770] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]
<7> [166.123103] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:550:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [166.123691] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [166.123805] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-1]
<7> [166.123880] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]
<7> [166.128370] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-1] disconnected
<7> [166.128424] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-1]
<7> [166.128430] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]
<7> [166.133080] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-1] disconnected
<7> [166.133089] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2]
<7> [166.133092] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]
<7> [166.137411] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2] disconnected
<7> [166.137415] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-2]
<7> [166.137418] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]
<7> [166.141601] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-2] disconnected
<7> [166.141605] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-3]
<7> [166.141607] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]
<7> [166.146096] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-3] disconnected
<7> [166.146103] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]
<7> [166.146107] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]
<7> [166.150519] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected
<7> [166.150524] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-4]
<7> [166.150527] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]
<7> [166.155057] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-4] disconnected
<7> [166.155061] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [166.155067] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:DP-1] enabled? no
<7> [166.155069] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:520:HDMI-A-1] enabled? no
<7> [166.155071] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-2] enabled? no
<7> [166.155072] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:HDMI-A-2] enabled? no
<7> [166.155074] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:538:HDMI-A-3] enabled? no
<7> [166.155075] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:DP-3] enabled? no
<7> [166.155077] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:550:HDMI-A-4] enabled? no
<7> [166.155163] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [166.155177] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [166.155234] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [166.155246] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<6> [166.155320] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [166.156194] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [166.156375] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7> [166.156727] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [166.156679] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [166.156818] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [166.156932] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [166.157053] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [166.157128] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-1]
<7> [166.157135] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]
<7> [166.157160] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [166.157271] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [166.157375] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [166.157476] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [166.157576] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [166.157675] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [166.157775] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [166.157871] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [166.157977] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [166.158075] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [166.158172] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [166.158269] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [166.158368] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [166.158472] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [166.158572] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [166.158672] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [166.158773] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [166.158870] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<3> [166.161037] snd_hda_intel 0000:04:00.0: Unknown capability 0
<7> [166.161054] azx_first_init: snd_hda_intel 0000:04:00.0: chipset global capabilities = 0x4101
<7> [166.161225] azx_init_pci: snd_hda_intel 0000:04:00.0: Clearing TCSEL
<7> [166.161232] azx_init_pci: snd_hda_intel 0000:04:00.0: SCH snoop: Enabled
<7> [166.161413] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-1] disconnected
<7> [166.161419] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-1]
<7> [166.161422] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]
<7> [166.161969] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [166.165596] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-1] disconnected
<7> [166.165601] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2]
<7> [166.165604] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]
<7> [166.169020] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [166.169267] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x02000000)
<7> [166.169527] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [166.169756] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x0a000000)
<7> [166.170762] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [166.171023] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x2a000000)
<7> [166.171256] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [166.171462] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0xaa000000)
<7> [166.171700] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2] disconnected
<7> [166.171707] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-2]
<7> [166.171711] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]
<6> [166.175741] xe 0000:03:00.0: [drm] Using mailbox commands for power limits
<7> [166.175871] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-2] disconnected
<7> [166.175875] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-3]
<7> [166.175878] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]
<7> [166.176210] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] thermal info read val 0x3c78647d val1 0x69
<7> [166.176363] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] thermal config count 0x9
<7> [166.176465] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [166.176858] xe 0000:03:00.0: [drm] PL2 is supported on channel 0
<7> [166.176898] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [166.177133] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [166.177300] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [166.180133] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-3] disconnected
<7> [166.180137] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]
<7> [166.180140] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]
<7> [166.180561] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [166.184408] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected
<7> [166.184414] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-4]
<7> [166.184417] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]
<7> [166.186118] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [166.186727] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<6> [166.188266] xe 0000:0a:00.0: [drm] Running in SR-IOV PF mode
<7> [166.188313] xe 0000:0a:00.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error
<7> [166.188605] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-4] disconnected
<7> [166.188611] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [166.188621] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:DP-1] enabled? no
<7> [166.188623] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:520:HDMI-A-1] enabled? no
<7> [166.188625] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-2] enabled? no
<7> [166.188627] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:HDMI-A-2] enabled? no
<7> [166.188628] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:538:HDMI-A-3] enabled? no
<7> [166.188630] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:DP-3] enabled? no
<7> [166.188632] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:550:HDMI-A-4] enabled? no
<7> [166.188764] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [166.188781] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [166.188821] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [166.188830] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [166.188851] xe 0000:03:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<6> [166.189018] xe 0000:0a:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [166.189026] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE G21 e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [166.189145] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [166.189246] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [166.189356] xe 0000:0a:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<7> [166.191850] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<6> [166.192713] xe 0000:0a:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000
<6> [166.192806] xe 0000:0a:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [166.192808] xe 0000:0a:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<6> [166.192810] xe 0000:0a:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [166.192811] xe 0000:0a:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<7> [166.192950] xe 0000:0a:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [166.193121] xe 0000:0a:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [166.193254] xe 0000:0a:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [166.193576] xe 0000:0a:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [166.193689] xe 0000:0a:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [166.193807] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [166.193921] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [166.194041] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [166.194159] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [166.194466] xe 0000:0a:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [166.194609] xe 0000:0a:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [166.194727] xe 0000:0a:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [166.194837] xe 0000:0a:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [166.195158] xe 0000:0a:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [166.195589] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [166.206810] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware successful
<7> [166.211734] xe 0000:0a:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [166.211847] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [166.211965] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [166.212070] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [166.212172] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [166.212202] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [166.212271] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [166.212338] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [166.212368] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 850)
<7> [166.212447] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [166.212465] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [166.212550] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [166.212558] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [166.212650] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [166.212659] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [166.212747] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [166.212755] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [166.212847] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [166.212858] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [166.212948] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [166.212977] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [166.213077] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [166.213083] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [166.213178] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [166.213180] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [166.213272] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [166.213275] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [166.213365] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [166.213368] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [166.213457] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [166.213458] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [166.213552] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [166.213557] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [166.213652] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [166.213659] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [166.213747] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [166.213758] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [166.213840] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [166.213859] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [166.213941] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [166.213954] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [166.214051] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [166.214072] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [166.214145] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [166.214172] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [166.214237] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [166.214268] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [166.214333] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [166.214365] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [166.214430] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [166.214459] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [166.214524] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [166.214552] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [166.214616] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [166.214655] xe 0000:0a:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [166.214710] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [166.214807] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [166.214902] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [166.214990] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [166.215005] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [166.215099] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [166.215132] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [166.215196] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [166.215299] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [166.215398] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [166.215481] xe 0000:0a:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [166.215492] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [166.215593] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [166.215694] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [166.215818] xe 0000:0a:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [166.216073] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [166.216057] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [166.216175] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [166.216466] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [166.216615] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [166.216941] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [166.217284] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [166.217399] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [166.217602] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [166.217712] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [166.218048] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [166.218161] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [166.218319] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [166.219025] xe 0000:0a:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [166.219387] xe 0000:0a:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [166.219724] xe 0000:0a:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [166.219849] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [166.219954] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [166.220083] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 130 (130.0 usec)
<7> [166.220178] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 130 (130.0 usec)
<7> [166.220272] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [166.220364] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [166.220459] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [166.220550] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [166.220638] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [166.220724] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [166.220809] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 130 (130.0 usec)
<7> [166.220893] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 130 (130.0 usec)
<7> [166.220988] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [166.221074] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [166.221158] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<6> [166.221295] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input4
<7> [166.221247] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [166.221884] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [166.222033] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [166.222158] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [166.222271] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [166.222382] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<6> [166.222474] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input5
<7> [166.222495] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [166.222612] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [166.222724] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [166.222831] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [166.222935] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [166.223057] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<6> [166.223187] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input6
<7> [166.223201] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [166.223346] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [166.223462] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [166.223599] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [166.223723] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [166.223857] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [166.223998] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [166.224134] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [166.224261] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [166.224365] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [166.224467] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [166.224579] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [166.224706] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<6> [166.224830] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input7
<7> [166.224835] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [166.224966] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [166.225155] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [166.225276] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [166.225377] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [166.225502] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<6> [166.235986] xe 0000:0a:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [166.238639] xe 0000:0a:00.0: [drm:intel_crtc_init [xe]] 4 display pipes available.
<7> [166.247772] xe 0000:0a:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [166.247921] xe 0000:0a:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [166.248053] xe 0000:0a:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [166.248383] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:506:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [166.248533] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:506:DDI TC1/PHY F]
<7> [166.248966] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:506:DDI TC1/PHY F]
<7> [166.249089] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:506:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [166.249522] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:525:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [166.249659] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:525:DDI TC2/PHY G]
<7> [166.249947] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:525:DDI TC2/PHY G]
<7> [166.250071] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:525:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [166.250466] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:537:DDI TC3/PHY H]
<7> [166.250567] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:537:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [166.250946] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:541:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [166.251094] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:541:DDI TC4/PHY I]
<7> [166.251377] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:541:DDI TC4/PHY I]
<7> [166.251486] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:541:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [166.251931] xe 0000:0a:00.0: [drm:intel_vga_disable [xe]] VGA plane is disabled
<7> [166.252115] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:150:pipe A] hw state readout: disabled
<7> [166.252471] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled
<7> [166.252627] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:386:pipe C] hw state readout: disabled
<7> [166.252973] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:504:pipe D] hw state readout: disabled
<7> [166.253077] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A
<7> [166.253249] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:64:plane 2A] hw state readout: disabled, pipe A
<7> [166.253416] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 3A] hw state readout: disabled, pipe A
<7> [166.253582] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:124:plane 4A] hw state readout: disabled, pipe A
<7> [166.253756] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:134:plane 5A] hw state readout: disabled, pipe A
<7> [166.253937] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:144:cursor A] hw state readout: disabled, pipe A
<7> [166.254274] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B
<7> [166.254377] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B
<7> [166.254478] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B
<7> [166.254771] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B
<7> [166.254869] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B
<7> [166.254978] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B
<7> [166.255304] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:270:plane 1C] hw state readout: disabled, pipe C
<7> [166.255420] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:300:plane 2C] hw state readout: disabled, pipe C
<7> [166.255521] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:330:plane 3C] hw state readout: disabled, pipe C
<7> [166.255810] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:360:plane 4C] hw state readout: disabled, pipe C
<7> [166.255909] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:370:plane 5C] hw state readout: disabled, pipe C
<7> [166.256016] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:380:cursor C] hw state readout: disabled, pipe C
<7> [166.256300] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:388:plane 1D] hw state readout: disabled, pipe D
<7> [166.256400] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:418:plane 2D] hw state readout: disabled, pipe D
<7> [166.256505] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:448:plane 3D] hw state readout: disabled, pipe D
<7> [166.256796] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:478:plane 4D] hw state readout: disabled, pipe D
<7> [166.256895] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:488:plane 5D] hw state readout: disabled, pipe D
<7> [166.257001] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:498:cursor D] hw state readout: disabled, pipe D
<7> [166.257300] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:506:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [166.257396] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:508:DP-MST A] hw state readout: disabled, pipe A
<7> [166.257490] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DP-MST B] hw state readout: disabled, pipe B
<7> [166.257578] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:510:DP-MST C] hw state readout: disabled, pipe C
<7> [166.257667] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:511:DP-MST D] hw state readout: disabled, pipe D
<7> [166.257969] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:525:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [166.258063] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:527:DP-MST A] hw state readout: disabled, pipe A
<7> [166.258153] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST B] hw state readout: disabled, pipe B
<7> [166.258241] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:529:DP-MST C] hw state readout: disabled, pipe C
<7> [166.258327] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:530:DP-MST D] hw state readout: disabled, pipe D
<7> [166.258614] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:537:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [166.258710] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:541:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [166.258796] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:543:DP-MST A] hw state readout: disabled, pipe A
<7> [166.258891] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DP-MST B] hw state readout: disabled, pipe B
<7> [166.258994] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:545:DP-MST C] hw state readout: disabled, pipe C
<7> [166.259084] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:546:DP-MST D] hw state readout: disabled, pipe D
<7> [166.259173] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0
<7> [166.259288] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [166.259394] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1
<7> [166.259694] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [166.259799] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0
<7> [166.259902] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0
<7> [166.260223] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0
<7> [166.260328] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:507:DP-4] hw state readout: disabled
<7> [166.260445] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:520:HDMI-A-5] hw state readout: disabled
<7> [166.260749] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:526:DP-5] hw state readout: disabled
<7> [166.260858] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:534:HDMI-A-6] hw state readout: disabled
<7> [166.260971] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:538:HDMI-A-7] hw state readout: disabled
<7> [166.261309] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:542:DP-6] hw state readout: disabled
<7> [166.261462] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:550:HDMI-A-8] hw state readout: disabled
<7> [166.261607] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:34:plane 1A] min_cdclk 0 kHz
<7> [166.261710] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:64:plane 2A] min_cdclk 0 kHz
<7> [166.261802] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 3A] min_cdclk 0 kHz
<7> [166.261899] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:124:plane 4A] min_cdclk 0 kHz
<7> [166.262004] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:134:plane 5A] min_cdclk 0 kHz
<7> [166.262097] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:144:cursor A] min_cdclk 0 kHz
<7> [166.262189] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:150:pipe A] min_cdclk 0 kHz
<7> [166.262284] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz
<7> [166.262374] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz
<7> [166.262464] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz
<7> [166.262551] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz
<7> [166.262638] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz
<7> [166.262725] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz
<7> [166.262811] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz
<7> [166.262897] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:270:plane 1C] min_cdclk 0 kHz
<7> [166.263002] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:300:plane 2C] min_cdclk 0 kHz
<7> [166.263097] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:330:plane 3C] min_cdclk 0 kHz
<7> [166.263187] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:360:plane 4C] min_cdclk 0 kHz
<7> [166.263275] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:370:plane 5C] min_cdclk 0 kHz
<7> [166.263364] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:380:cursor C] min_cdclk 0 kHz
<7> [166.263452] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:386:pipe C] min_cdclk 0 kHz
<7> [166.263544] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:388:plane 1D] min_cdclk 0 kHz
<7> [166.263636] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:418:plane 2D] min_cdclk 0 kHz
<7> [166.263730] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:448:plane 3D] min_cdclk 0 kHz
<7> [166.263820] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:478:plane 4D] min_cdclk 0 kHz
<7> [166.263906] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:488:plane 5D] min_cdclk 0 kHz
<7> [166.264001] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:498:cursor D] min_cdclk 0 kHz
<7> [166.264089] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:504:pipe D] min_cdclk 0 kHz
<7> [166.264378] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:150:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [166.264484] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [166.264585] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:386:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [166.264678] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:504:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [166.264767] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [166.264892] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [166.265021] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [166.265131] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [166.265455] xe 0000:0a:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [166.265611] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: no [setup_hw_state]
<7> [166.265726] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state]
<7> [166.265840] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:386:pipe C] enable: no [setup_hw_state]
<7> [166.265948] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:504:pipe D] enable: no [setup_hw_state]
<7> [166.266077] xe 0000:0a:00.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling
<6> [166.269255] xe 0000:0a:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.58.0
<7> [166.272524] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x006603f7
<7> [166.272631] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [166.272716] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [166.272796] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [166.272872] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000eea
<7> [166.272947] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [166.273039] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [166.273113] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [166.273185] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [166.273257] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [166.273328] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [166.273403] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [166.273478] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [166.273552] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [166.273626] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [166.273751] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [166.285029] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [166.285785] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [166.285910] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,000fffff
<7> [166.286025] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,000fffff
<7> [166.286105] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [166.286182] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [166.286257] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [166.374384] xe 0000:0a:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [166.374387] xe 0000:0a:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [166.374519] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [166.374629] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6217]: allow rw access
<7> [166.374725] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62af]: allow rw access
<7> [166.374814] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [166.374894] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [166.374979] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [166.375108] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [166.375224] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [166.375361] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [166.375437] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [166.375516] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [166.375593] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [166.375725] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [166.375807] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [166.375899] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [166.375996] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [166.377356] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [166.377449] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [166.377541] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [166.377630] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440
<7> [166.377722] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [166.377811] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [166.377898] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [166.377990] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [166.378085] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [166.378173] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [166.378262] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [166.378344] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [166.378425] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [166.378504] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [166.378595] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [166.378686] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [166.378774] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [166.378860] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [166.378944] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [166.379040] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [166.379123] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [166.379207] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [166.379289] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [166.379371] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [166.379454] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [166.379540] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [166.379634] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [166.379725] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [166.379810] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [166.379894] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210
<7> [166.379979] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8
<7> [166.380060] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc
<7> [166.380141] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01
<7> [166.380220] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c
<7> [166.380307] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [166.380401] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [166.380491] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [166.380580] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [166.380667] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [166.380759] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [166.380852] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [166.380951] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [166.381055] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [166.381415] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [166.381496] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [166.381576] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [166.381654] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [166.382012] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [166.382099] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [166.382183] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [166.382263] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [166.382605] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [166.382688] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [166.382772] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [166.382853] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [166.382934] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [166.383019] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [166.383095] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [166.383448] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [166.383526] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [166.383604] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [166.383679] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [166.383756] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [166.383831] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [166.383911] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [166.384510] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [166.389226] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x010823f7
<7> [166.389314] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [166.389392] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [166.389465] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [166.389536] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x0000232e
<7> [166.389606] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [166.389674] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [166.389741] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [166.389808] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [166.389878] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [166.389946] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [166.390032] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [166.390105] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [166.390177] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [166.390271] xe 0000:0a:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [166.390374] xe 0000:0a:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [166.392588] xe 0000:0a:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0x627000 for xe_guc_buf_cache_init_with_size [xe]
<7> [166.393745] xe 0000:0a:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [166.395503] xe 0000:0a:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [166.415939] xe 0000:0a:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 49152)
<7> [166.426795] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [166.427201] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [166.427917] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4140 dwords
<7> [166.428035] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [166.428123] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140
<7> [166.428205] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [166.428289] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [166.428373] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [166.428453] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [166.428532] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [166.428612] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [166.428694] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000
<7> [166.431252] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [166.431351] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [166.431433] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [166.433373] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [166.433463] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [166.437714] xe 0000:0a:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [166.439058] xe 0000:0a:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.58.0
<7> [166.441172] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x01a1c3f7
<7> [166.441272] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [166.441362] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [166.441446] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [166.441526] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00003662
<7> [166.441606] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [166.441683] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [166.441759] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [166.441835] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [166.441910] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [166.442004] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [166.442103] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [166.442192] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [166.442269] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [166.442840] xe 0000:0a:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [166.443284] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [166.443419] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [166.454992] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 10ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [166.455517] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [166.455666] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000,00000000
<7> [166.455792] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000,00000000
<7> [166.455911] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [166.456054] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [166.456164] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [166.456285] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [166.456287] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [166.456289] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [166.456290] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [166.456292] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [166.456293] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [166.456294] xe 0000:0a:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [166.456296] xe 0000:0a:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [166.456309] xe 0000:0a:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [166.456585] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [166.456740] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [166.456887] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [166.457035] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [166.457166] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [166.457291] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [166.457410] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [166.457530] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [166.457645] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [166.457767] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [166.458007] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [166.458115] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [166.458226] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [166.458330] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [166.458433] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [166.458532] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [166.458634] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [166.458741] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [166.458843] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [166.458943] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [166.459158] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [166.459249] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [166.459343] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [166.459434] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [166.459529] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [166.459626] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [166.459714] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [166.459804] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [166.459889] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [166.459976] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [166.460151] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [166.460231] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [166.460321] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [166.460407] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [166.460493] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [166.460574] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [166.460655] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [166.460739] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [166.460826] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [166.460911] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [166.462142] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [166.462255] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [166.462359] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xc50c] = 0x00010002
<7> [166.462452] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [166.462545] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [166.462639] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [166.462734] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [166.462823] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [166.462913] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [166.463011] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [166.463098] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [166.463181] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [166.463260] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [166.463337] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [166.463413] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [166.463494] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [166.463577] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [166.463658] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [166.463736] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [166.463812] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [166.463890] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [166.463969] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [166.464043] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [166.464119] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [166.464200] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [166.464280] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [166.464374] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [166.464463] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [166.464549] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c
<7> [166.464631] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1
<7> [166.464713] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0
<7> [166.464799] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c
<7> [166.464883] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1
<7> [166.464968] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0
<7> [166.465047] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c
<7> [166.465125] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1
<7> [166.465209] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0
<7> [166.465443] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [166.465535] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [166.465621] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [166.465703] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d0] = 0x1039319c
<7> [166.465781] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d4] = 0x103931a1
<7> [166.465865] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d8] = 0x003931d0
<7> [166.465949] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04dc] = 0x1039419c
<7> [166.466044] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e0] = 0x103941a1
<7> [166.466122] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e4] = 0x003941d0
<7> [166.466199] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e8] = 0x1039499c
<7> [166.466278] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04ec] = 0x103949a1
<7> [166.466360] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04f0] = 0x003949d0
<7> [166.466580] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [166.466662] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [166.466743] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [166.466822] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c
<7> [166.466900] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1
<7> [166.466984] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0
<7> [166.467067] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c
<7> [166.467148] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1
<7> [166.467226] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0
<7> [166.467302] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c
<7> [166.467380] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1
<7> [166.467456] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0
<7> [166.467684] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [166.467762] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [166.467840] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [166.467917] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d0] = 0x1039319c
<7> [166.468004] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d4] = 0x103931a1
<7> [166.468088] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d8] = 0x003931d0
<7> [166.468168] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84dc] = 0x1039419c
<7> [166.468247] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e0] = 0x103941a1
<7> [166.468323] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e4] = 0x003941d0
<7> [166.468403] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e8] = 0x1039499c
<7> [166.468485] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84ec] = 0x103949a1
<7> [166.468565] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84f0] = 0x003949d0
<7> [166.468998] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [166.472714] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x024453f7
<7> [166.472808] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [166.472893] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [166.472978] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [166.473058] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004ab4
<7> [166.473135] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [166.473210] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [166.473285] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [166.473360] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [166.473434] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [166.473506] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [166.473580] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [166.473657] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [166.473732] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [166.473828] xe 0000:0a:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [166.473934] xe 0000:0a:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [166.475236] xe 0000:0a:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x1a1c000 for xe_guc_buf_cache_init_with_size [xe]
<7> [166.495245] xe 0000:0a:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 49152)
<7> [166.506022] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [166.506386] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [166.506934] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [166.507047] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [166.508694] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [166.508792] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [166.520973] xe 0000:0a:00.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC
<7> [166.521424] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [166.521621] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [166.521794] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [166.521987] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<5> [166.530066] Creating 4 MTD partitions on "xe.nvm.2560":
<5> [166.530087] 0x000000000000-0x000000001000 : "xe.nvm.2560.DESCRIPTOR"
<5> [166.540484] 0x000000001000-0x00000054e000 : "xe.nvm.2560.GSC"
<5> [166.547674] 0x00000054e000-0x00000074e000 : "xe.nvm.2560.OptionROM"
<5> [166.556888] 0x00000074e000-0x00000075e000 : "xe.nvm.2560.DAM"
<7> [166.566780] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [166.570456] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [166.570453] xe 0000:0a:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [166.570588] xe 0000:0a:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [166.570828] xe 0000:0a:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [166.570879] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [166.571017] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [166.571179] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [166.571310] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [166.571585] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 0: start 0x90008
<7> [166.571758] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 1: start 0x90108
<7> [166.571899] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 2: start 0x90208
<7> [166.572161] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 3: start 0x90308
<7> [166.572555] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 4: start 0x903c8
<7> [166.573022] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008
<7> [166.573339] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108
<7> [166.573794] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208
<7> [166.574275] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308
<7> [166.574706] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8
<7> [166.575255] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 0: start 0x52008
<7> [166.575820] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 1: start 0x52108
<7> [166.576281] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 2: start 0x52208
<7> [166.576687] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 3: start 0x52308
<7> [166.576938] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 4: start 0x523c8
<7> [166.577168] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 0: start 0x59008
<7> [166.577466] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 1: start 0x59108
<7> [166.577798] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 2: start 0x59208
<7> [166.578230] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 3: start 0x59308
<7> [166.578608] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 4: start 0x593c8
<7> [166.579940] xe 0000:0a:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no
<7> [166.580543] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [166.581418] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [166.581860] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [166.582473] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: no [fastset]
<7> [166.582912] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset]
<7> [166.583405] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:386:pipe C] enable: no [fastset]
<7> [166.583806] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:504:pipe D] enable: no [fastset]
<7> [166.584840] xe 0000:0a:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff30f2 0x28d32a71)
<7> [166.585413] xe 0000:0a:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [166.586162] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A]
<7> [166.586776] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]
<7> [166.587368] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:386:pipe C]
<7> [166.587923] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [166.587904] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:504:pipe D]
<7> [166.588469] xe 0000:0a:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03010 0x28d00071)
<7> [166.592922] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:507:DP-4] adding connector to sysfs
<7> [166.593443] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card1-DP-4
<7> [166.596378] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:507:DP-4] generating connector hotplug event
<6> [166.596223] mei_lb xe.mei-gscfi.2560-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:0a:00.0 (ops xe_late_bind_component_ops [xe])
<7> [166.596589] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:520:HDMI-A-5] adding connector to sysfs
<7> [166.597659] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [166.598283] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:520:HDMI-A-5] generating connector hotplug event
<7> [166.598426] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:526:DP-5] adding connector to sysfs
<7> [166.599754] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card1-DP-5
<7> [166.601854] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:526:DP-5] generating connector hotplug event
<7> [166.601955] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:534:HDMI-A-6] adding connector to sysfs
<7> [166.603071] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:534:HDMI-A-6] generating connector hotplug event
<7> [166.603159] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:538:HDMI-A-7] adding connector to sysfs
<7> [166.603756] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:538:HDMI-A-7] generating connector hotplug event
<7> [166.603825] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:542:DP-6] adding connector to sysfs
<7> [166.604828] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card1-DP-6
<7> [166.606240] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:542:DP-6] generating connector hotplug event
<7> [166.606287] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:550:HDMI-A-8] adding connector to sysfs
<7> [166.607107] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:550:HDMI-A-8] generating connector hotplug event
<6> [166.607145] [drm] Initialized xe 1.1.0 for 0000:0a:00.0 on minor 1
<7> [166.607235] xe 0000:0a:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [166.607608] xe 0000:0a:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<7> [166.610728] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:150:pipe A] not active, skipping
<7> [166.610933] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping
<7> [166.611110] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:386:pipe C] not active, skipping
<7> [166.611273] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:504:pipe D] not active, skipping
<7> [166.611434] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [166.611748] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-4]
<7> [166.612945] xe 0000:0a:00.0: [drm:drm_client_modeset_probe]
<7> [166.616034] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:507:DP-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [166.616297] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-5]
<7> [166.620649] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:520:HDMI-A-5] status updated from unknown to disconnected (epoch counter 0->1)
<7> [166.620861] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-5]
<7> [166.625180] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:526:DP-5] status updated from unknown to disconnected (epoch counter 0->1)
<7> [166.625361] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-6]
<7> [166.629574] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:534:HDMI-A-6] status updated from unknown to disconnected (epoch counter 0->1)
<7> [166.629751] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-7]
<7> [166.633943] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:538:HDMI-A-7] status updated from unknown to disconnected (epoch counter 0->1)
<7> [166.634125] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-6]
<7> [166.638322] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:542:DP-6] status updated from unknown to disconnected (epoch counter 0->1)
<7> [166.638498] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-8]
<7> [166.642756] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:550:HDMI-A-8] status updated from unknown to disconnected (epoch counter 0->1)
<7> [166.643226] xe 0000:0a:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [166.643294] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-4]
<7> [166.643300] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-4]
<7> [166.647544] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-4] disconnected
<7> [166.647550] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-5]
<7> [166.647552] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-5]
<7> [166.651692] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-5] disconnected
<7> [166.651696] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-5]
<7> [166.651698] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-5]
<7> [166.655884] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-5] disconnected
<7> [166.655887] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-6]
<7> [166.655889] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-6]
<7> [166.660111] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-6] disconnected
<7> [166.660115] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-7]
<7> [166.660117] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-7]
<7> [166.664403] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-7] disconnected
<7> [166.664414] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-6]
<7> [166.664419] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-6]
<7> [166.668730] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-6] disconnected
<7> [166.668735] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-8]
<7> [166.668739] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-8]
<7> [166.672982] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-8] disconnected
<7> [166.672992] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [166.672996] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:DP-4] enabled? no
<7> [166.672999] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:520:HDMI-A-5] enabled? no
<7> [166.673002] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-5] enabled? no
<7> [166.673005] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:HDMI-A-6] enabled? no
<7> [166.673007] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:538:HDMI-A-7] enabled? no
<7> [166.673009] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:DP-6] enabled? no
<7> [166.673011] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:550:HDMI-A-8] enabled? no
<7> [166.672973] xe 0000:0a:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [166.673055] xe 0000:0a:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [166.673063] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [166.673219] xe 0000:0a:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [166.673227] xe 0000:0a:00.0: [drm] Cannot find any crtc or sizes
<7> [166.674171] xe 0000:0a:00.0: [drm:drm_client_modeset_probe]
<7> [166.674127] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [166.674345] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [166.674544] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-4]
<7> [166.674548] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [166.674552] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-4]
<7> [166.674745] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [166.674997] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [166.675227] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [166.675562] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [166.675931] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [166.676124] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [166.676311] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [166.676688] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [166.676996] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [166.677202] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [166.677397] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [166.677606] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [166.677808] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [166.677995] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [166.678176] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [166.678357] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [166.678536] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [166.678717] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [166.678880] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-4] disconnected
<7> [166.678888] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-5]
<7> [166.678892] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-5]
<7> [166.678903] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [166.683136] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-5] disconnected
<7> [166.683142] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-5]
<7> [166.683146] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-5]
<7> [166.687441] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-5] disconnected
<7> [166.687448] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-6]
<7> [166.687452] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-6]
<7> [166.688977] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [166.689141] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x02000000)
<7> [166.689308] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [166.689432] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x0a000000)
<7> [166.689601] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [166.689747] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x2a000000)
<7> [166.689915] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [166.690093] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0xaa000000)
<7> [166.690444] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [166.690598] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [166.690747] xe 0000:0a:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [166.690876] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [166.691685] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-6] disconnected
<7> [166.691692] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-7]
<7> [166.691696] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-7]
<7> [166.695907] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-7] disconnected
<7> [166.695913] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-6]
<7> [166.695917] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-6]
<6> [166.696948] xe 0000:0a:00.0: [drm] Using mailbox commands for power limits
<7> [166.697866] xe 0000:0a:00.0: [drm:xe_hwmon_register [xe]] thermal info read val 0x3c78647d val1 0x69
<7> [166.698031] xe 0000:0a:00.0: [drm:xe_hwmon_register [xe]] thermal config count 0x9
<7> [166.698136] xe 0000:0a:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [166.698562] xe 0000:0a:00.0: [drm] PL2 is supported on channel 0
<7> [166.698606] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [166.698873] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [166.699024] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [166.700200] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-6] disconnected
<7> [166.700207] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-8]
<7> [166.700212] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-8]
<7> [166.702347] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [166.705990] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-8] disconnected
<7> [166.706005] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [166.706021] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:DP-4] enabled? no
<7> [166.706027] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:520:HDMI-A-5] enabled? no
<7> [166.706032] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-5] enabled? no
<7> [166.706037] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:HDMI-A-6] enabled? no
<7> [166.706041] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:538:HDMI-A-7] enabled? no
<7> [166.706046] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:DP-6] enabled? no
<7> [166.706050] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:550:HDMI-A-8] enabled? no
<7> [166.706306] xe 0000:0a:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [166.706335] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [166.706431] xe 0000:0a:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [166.706451] xe 0000:0a:00.0: [drm] Cannot find any crtc or sizes
<7> [166.706507] xe 0000:0a:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<6> [166.706409] snd_hda_intel 0000:0b:00.0: bound 0000:0a:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [166.706524] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [166.706890] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [166.707626] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [166.708737] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [166.709237] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [166.709630] xe 0000:0a:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<3> [166.714765] snd_hda_intel 0000:0b:00.0: Unknown capability 0
<7> [166.714792] azx_first_init: snd_hda_intel 0000:0b:00.0: chipset global capabilities = 0x4101
<7> [166.715120] azx_init_pci: snd_hda_intel 0000:0b:00.0: Clearing TCSEL
<7> [166.715213] azx_init_pci: snd_hda_intel 0000:0b:00.0: SCH snoop: Enabled
<7> [166.716080] xe 0000:0a:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware successful
<7> [166.717944] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [166.737042] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [166.737110] [IGT] xe_module_load: finished subtest load, SUCCESS
<6> [166.737308] [IGT] xe_module_load: exiting, ret=0
|