igt@xe_pm@d3hot-multiple-execs on shard-bmg@xe-4569-e66c64e4f12e55cad35c680f1e328a7c7ee92cab Test details

Detail	Value
Duration	4.20 seconds
Hostname	shard-bmg-3
Igt-Version	IGT-Version: 2.3-gdbe2c5702 (x86_64) (Linux: 6.19.0-lgci-xe-xe-4569-e66c64e4f12e55cad-debug+ x86_64)
Out	Using IGT_SRANDOM=1771362582 for randomisation Opened device: /dev/dri/card0 Starting subtest: d3hot-multiple-execs Subtest d3hot-multiple-execs: SUCCESS (4.204s)
Err	Starting subtest: d3hot-multiple-execs Subtest d3hot-multiple-execs: SUCCESS (4.204s)
Dmesg	<6> [203.814595] Console: switching to colour dummy device 80x25 <6> [203.814858] [IGT] xe_pm: executing <6> [204.900392] [IGT] xe_pm: starting subtest d3hot-multiple-execs <7> [204.902531] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [204.902639] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [204.902754] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [204.902893] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A] <7> [204.903029] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [204.903160] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [204.903287] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2 <7> [204.903458] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [204.903569] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2 <7> [204.903695] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2 <7> [204.903965] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [204.904091] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [204.904222] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [204.904353] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A] <7> [204.904481] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [204.904611] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [204.904760] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2 <7> [204.904913] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [204.905025] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2 <7> [204.905146] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2 <7> [204.905357] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [204.905487] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [204.905611] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [204.905775] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A] <7> [204.905915] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [204.906050] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [204.906178] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2 <7> [204.906322] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [204.906433] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2 <7> [204.906551] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2 <7> [204.906705] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0 <7> [204.906827] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0 <7> [204.906936] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [204.907042] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [204.907147] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [204.907250] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [204.907358] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 1989) -> ( 0 - 4037), size 1989 -> 4037 <7> [204.907464] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb (1989 - 2048) -> (4037 - 4096), size 59 -> 59 <7> [204.907587] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0 <7> [204.907834] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000 <7> [204.907951] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000 <7> [204.908048] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624 <7> [204.908164] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz <7> [204.908276] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated TC PLL 2 <7> [204.908369] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving TC PLL 2 <7> [204.908464] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset] <7> [204.908563] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [204.908660] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [204.908774] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [204.908869] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [204.908963] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [204.909055] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [204.909147] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 <7> [204.909238] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [204.909331] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [204.909426] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [204.909518] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [204.909610] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [204.909708] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [204.909801] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00 <7> [204.909898] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11 <7> [204.909995] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00 <7> [204.910088] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [204.910181] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [204.910273] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36 <7> [204.910365] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125 <7> [204.910456] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [204.910548] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [204.910639] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [204.910743] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [204.910838] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [204.910929] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [204.911020] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [204.911110] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [204.911199] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [204.911289] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [204.911379] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [204.911469] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [204.911569] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [204.911661] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000 <7> [204.911778] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [204.911893] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c <7> [204.911987] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110 <7> [204.912077] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c <7> [204.912167] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1 <7> [204.912257] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a <7> [204.912349] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81 <7> [204.912444] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000 <7> [204.912537] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001 <7> [204.912629] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000 <7> [204.912728] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [204.912821] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000 <7> [204.912912] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00 <7> [204.913002] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [204.913091] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [204.913179] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [204.913269] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [204.913358] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [204.913446] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [204.913534] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [204.913627] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [204.913722] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [204.913812] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [204.913901] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [204.913990] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [204.914080] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [204.914169] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [204.914260] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [204.914349] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7> [204.914438] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7> [204.914528] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7> [204.914618] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7> [204.914716] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7> [204.915390] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G] Disable audio codec on [CRTC:150:pipe A] <7> [204.938631] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7> [204.939270] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [204.960685] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [204.962902] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [204.963423] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:150:pipe A] <7> [204.965630] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2 <7> [204.966229] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F] <7> [204.966490] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A] <7> [204.966766] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B] <7> [204.967017] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C] <7> [204.967263] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D] <7> [204.967496] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G] <7> [204.967739] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A] <7> [204.967972] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B] <7> [204.968197] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C] <7> [204.968417] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D] <7> [204.968623] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H] <7> [204.968851] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I] <7> [204.969059] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A] <7> [204.969254] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B] <7> [204.969449] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C] <7> [204.969641] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D] <7> [204.971643] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: B) <7> [204.971876] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [204.976041] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [204.976280] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000) <7> [204.976761] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:526:DP-2] <7> [204.977189] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A] <7> [204.977813] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:538:HDMI-A-3] Limiting target display pipe bpp to 30 (EDID bpp 36, max requested bpp 30, max platform bpp 36) <7> [204.978021] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30) <7> [204.978209] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [204.978391] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B] <7> [204.978572] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [204.978766] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [204.978941] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3 <7> [204.979156] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [204.979293] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0 <7> [204.979455] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0 <7> [204.979580] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb (4037 - 4096) -> ( 0 - 0), size 59 -> 0 <7> [204.979721] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [204.979840] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [204.979958] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [204.980073] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [204.980201] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [204.980352] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000 <7> [204.980497] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000 <7> [204.980637] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0 <7> [204.980812] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz <7> [204.980959] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated TC PLL 3 <7> [204.981094] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving TC PLL 3 <7> [204.981227] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset] <7> [204.981359] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [204.981486] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0 <7> [204.981609] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [204.981729] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [204.981823] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [204.981908] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [204.981995] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [204.982079] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [204.982163] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [204.982165] xe 0000:03:00.0: colorspace: RGB <7> [204.982166] xe 0000:03:00.0: scan mode: Underscan <7> [204.982167] xe 0000:03:00.0: colorimetry: No Data <7> [204.982168] xe 0000:03:00.0: picture aspect: No Data <7> [204.982169] xe 0000:03:00.0: active aspect: Same as Picture <7> [204.982170] xe 0000:03:00.0: itc: No Data <7> [204.982171] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [204.982171] xe 0000:03:00.0: quantization range: Full <7> [204.982172] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [204.982173] xe 0000:03:00.0: video code: 0 <7> [204.982174] xe 0000:03:00.0: ycc quantization range: Full <7> [204.982175] xe 0000:03:00.0: hdmi content type: Graphics <7> [204.982176] xe 0000:03:00.0: pixel repeat: 0 <7> [204.982177] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [204.982178] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [204.982180] xe 0000:03:00.0: vendor: Intel <7> [204.982181] xe 0000:03:00.0: product: Discrete gfx <7> [204.982182] xe 0000:03:00.0: source device information: PC General (0x9) <7> [204.982183] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [204.982184] xe 0000:03:00.0: empty frame <7> [204.982185] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 07 00 66 10 00 01 00 00 00 00 00 00 00 00 <7> [204.982268] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 05 e3 cd 0c 32 38 45 38 35 30 09 07 07 00 00 00 <7> [204.982352] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [204.982436] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [204.982519] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37 <7> [204.982602] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [204.982703] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [204.982792] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9 <7> [204.982876] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9 <7> [204.982961] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9 <7> [204.983046] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9 <7> [204.983130] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9 <7> [204.983215] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 185625, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [204.983299] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [204.983383] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [204.983466] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [204.983550] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [204.983636] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [204.983734] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [204.983820] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [204.983904] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [204.983988] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40c0 <7> [204.984071] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [204.984154] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x4a06 <7> [204.984237] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [204.984321] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [204.984404] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [204.984488] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [204.984570] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [204.984657] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0xae00 <7> [204.984752] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [204.984839] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [204.984923] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [204.985007] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [204.985090] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [204.985173] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [204.985257] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [204.985340] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [204.985423] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [204.985507] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [204.985592] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [204.985679] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [204.985767] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [204.985849] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [204.985932] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [204.986016] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [204.986099] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [204.986183] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [204.986266] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no <7> [204.986349] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no <7> [204.986432] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no <7> [204.986516] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no <7> [204.986599] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no <7> [204.987270] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:538:HDMI-A-3][ENCODER:537:DDI TC3/PHY H] Disable audio codec on [CRTC:268:pipe B] <7> [205.009167] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7> [205.009850] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe B <7> [205.022589] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [205.030952] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x2, on? 1) for [CRTC:268:pipe B] <7> [205.033387] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3 <7> [205.034199] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F] <7> [205.034686] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A] <7> [205.035132] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B] <7> [205.035572] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C] <7> [205.036087] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D] <7> [205.036536] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G] <7> [205.037007] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A] <7> [205.037436] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B] <7> [205.037891] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C] <7> [205.038310] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D] <7> [205.038738] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H] <7> [205.039136] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I] <7> [205.039501] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A] <7> [205.039939] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B] <7> [205.040312] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C] <7> [205.040659] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D] <7> [205.041235] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [205.041785] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [205.042290] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [205.043109] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [205.043629] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xaa000000) <7> [205.044181] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [205.044666] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:538:HDMI-A-3] <7> [205.044923] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <7> [205.071697] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [205.073618] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [205.074770] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [205.075721] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [205.076461] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [205.324247] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [205.324433] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [205.328554] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [205.332669] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [205.332882] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [205.333110] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [205.333266] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [205.335891] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [205.344579] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [205.346203] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [205.347492] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [205.351094] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [205.352290] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [205.361147] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [205.361252] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [205.361349] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [205.367372] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.369279] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.371180] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.373095] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.374960] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.376993] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.378969] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.380973] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.385180] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.387123] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.389047] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.391058] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.392963] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.394966] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.397027] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.398971] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.400762] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [205.400775] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [205.400780] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [205.400785] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [205.400789] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [205.400794] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [205.400800] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [205.400806] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [205.400811] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [205.400839] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [205.401059] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [205.402768] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [205.402953] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [205.405805] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [205.406323] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [205.406414] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [205.406849] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [205.406938] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [205.406943] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [205.407030] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [205.408381] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [205.408385] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [205.408478] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [205.433984] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [205.433988] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [205.433991] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [205.433993] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [205.433995] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [205.433997] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [205.434000] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [205.434003] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [205.434006] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [205.434159] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [205.434248] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [205.434681] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [205.434769] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [205.434781] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [205.438903] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [205.510910] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [205.511929] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [205.512722] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [205.513477] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [205.514282] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [205.557206] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [205.557839] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [205.562431] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [205.567076] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [205.567602] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [205.568185] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [205.568798] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [205.571933] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [205.582139] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [205.583763] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [205.584865] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [205.590393] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [205.592271] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [205.605521] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [205.605844] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [205.606126] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [205.612616] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.614619] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.616668] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.618715] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.620763] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.622948] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.624975] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.626934] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.630989] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.632978] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.634925] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.636935] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.638971] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.640975] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.642950] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.644939] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.646732] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [205.646747] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [205.646754] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [205.646759] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [205.646764] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [205.646769] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [205.646776] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [205.646783] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [205.646789] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [205.646817] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [205.647073] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [205.648817] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [205.649023] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [205.651879] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [205.652416] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [205.652507] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [205.652964] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [205.653052] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [205.653057] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [205.653145] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [205.654495] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [205.654498] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [205.654600] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [205.679669] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [205.679673] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [205.679675] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [205.679678] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [205.679680] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [205.679682] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [205.679685] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [205.679688] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [205.679691] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [205.680063] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [205.680155] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [205.680601] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [205.680690] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [205.680701] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [205.684833] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [205.758863] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [205.759811] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [205.760608] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [205.761339] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [205.762118] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [205.795389] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [205.796012] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [205.800674] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [205.805217] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [205.805835] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [205.806720] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [205.807556] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [205.811484] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [205.822660] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [205.824599] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [205.825986] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [205.830723] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [205.832605] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [205.844032] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [205.844283] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [205.844433] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [205.850863] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.852823] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.854747] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.856759] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.858957] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.860881] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.862926] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.864923] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.868931] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.870932] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.872880] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.874911] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.876890] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.878923] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.880879] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.882819] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [205.884522] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [205.884533] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [205.884539] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [205.884544] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [205.884549] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [205.884555] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [205.884562] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [205.884569] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [205.884575] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [205.884603] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [205.884864] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [205.886673] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [205.886963] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [205.889953] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [205.890567] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [205.890699] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [205.891185] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [205.891319] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [205.891325] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [205.891454] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [205.892887] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [205.892892] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [205.893023] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [205.918024] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [205.918028] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [205.918030] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [205.918033] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [205.918035] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [205.918037] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [205.918040] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [205.918043] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [205.918046] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [205.918416] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [205.918521] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [205.919007] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [205.919139] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [205.919156] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [205.923307] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [205.990641] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [205.991620] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [205.992409] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [205.993209] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [205.993985] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [206.043905] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [206.044567] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [206.049197] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [206.053824] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [206.054368] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [206.055127] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [206.056026] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [206.059407] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [206.067759] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [206.069337] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [206.071293] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [206.076986] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [206.078883] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [206.091040] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [206.091319] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [206.091558] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [206.097966] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.099901] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.101895] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.103848] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.105889] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.107846] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.109888] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.111883] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.115913] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.117893] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.119890] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.121841] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.123885] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.125900] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.127869] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.129853] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.131638] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [206.131651] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [206.131657] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [206.131662] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [206.131667] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [206.131672] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [206.131679] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [206.131685] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [206.131691] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [206.131716] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [206.131959] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [206.133737] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [206.134012] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [206.136960] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [206.137565] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [206.137699] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [206.138186] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [206.138316] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [206.138322] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [206.138451] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [206.139887] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [206.139892] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [206.140021] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [206.165269] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [206.165273] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [206.165275] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [206.165277] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [206.165280] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [206.165282] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [206.165285] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [206.165288] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [206.165291] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [206.165671] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [206.165812] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [206.166290] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [206.166418] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [206.166435] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [206.171037] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [206.238731] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [206.239689] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [206.240490] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [206.241223] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [206.242004] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [206.280260] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [206.280957] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [206.285719] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [206.290337] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [206.290983] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [206.291858] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [206.292554] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [206.296093] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [206.306593] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [206.308163] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [206.309368] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [206.314156] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [206.316024] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [206.329403] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [206.329748] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [206.329871] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [206.336468] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.338519] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.340724] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.342791] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.344866] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.346825] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.348865] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.351085] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.355191] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.357397] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.359694] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.362194] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.364157] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.366360] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.368644] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.370718] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.372568] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [206.372586] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [206.372593] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [206.372599] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [206.372605] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [206.372611] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [206.372619] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [206.372627] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [206.372634] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [206.372664] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [206.372959] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [206.374776] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [206.375006] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [206.377894] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [206.378462] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [206.378553] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [206.378990] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [206.379075] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [206.379080] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [206.379163] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [206.380513] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [206.380517] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [206.380604] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [206.405541] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [206.405545] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [206.405547] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [206.405549] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [206.405551] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [206.405553] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [206.405556] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [206.405558] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [206.405561] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [206.405712] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [206.405795] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [206.406222] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [206.406301] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [206.406311] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [206.410418] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [206.478442] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [206.479271] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [206.480073] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [206.480842] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [206.481577] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [206.528062] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [206.528676] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [206.533263] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [206.537837] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [206.538362] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [206.539061] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [206.539758] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [206.543262] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [206.554030] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [206.555750] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [206.557683] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [206.563242] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [206.565124] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [206.578535] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [206.578885] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [206.579134] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [206.586060] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.588027] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.590032] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.591955] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.593907] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.595853] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.597840] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.599805] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.604188] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.606154] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.608096] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.610056] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.611992] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.613919] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.615860] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.617827] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.619565] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [206.619579] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [206.619584] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [206.619590] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [206.619594] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [206.619599] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [206.619606] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [206.619612] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [206.619618] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [206.619643] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [206.619883] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [206.621616] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [206.621811] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [206.624656] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [206.625181] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [206.625327] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [206.625788] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [206.625939] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [206.625944] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [206.626077] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [206.627487] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [206.627491] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [206.627587] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [206.652794] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [206.652798] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [206.652801] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [206.652803] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [206.652805] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [206.652807] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [206.652811] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [206.652813] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [206.652816] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [206.653173] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [206.653266] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [206.653700] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [206.653846] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [206.653863] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [206.658014] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [206.726754] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [206.727716] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [206.728515] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [206.729252] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [206.730041] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [206.763734] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [206.764395] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [206.769001] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [206.773676] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [206.774608] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [206.775394] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [206.776452] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [206.780693] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [206.792961] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [206.794731] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [206.796374] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [206.801218] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [206.803064] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [206.816462] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [206.816822] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [206.817149] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [206.823746] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.825786] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.827793] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.829781] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.831776] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.833749] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.835748] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.837748] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.841868] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.843806] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.845766] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.847741] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.849790] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.852028] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.853977] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.855915] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [206.857605] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [206.857617] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [206.857624] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [206.857630] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [206.857637] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [206.857643] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [206.857651] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [206.857658] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [206.857666] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [206.857693] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [206.857967] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [206.859679] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [206.859903] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [206.862794] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [206.863349] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [206.863442] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [206.863879] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [206.863968] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [206.863973] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [206.864059] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [206.865405] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [206.865409] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [206.865498] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [206.890703] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [206.890707] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [206.890709] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [206.890712] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [206.890714] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [206.890716] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [206.890719] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [206.890722] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [206.890725] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [206.891097] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [206.891188] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [206.891624] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [206.891711] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [206.891722] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [206.895844] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [206.966648] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [206.967672] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [206.968491] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [206.969223] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [206.970008] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [207.014047] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [207.014789] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [207.019365] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [207.023908] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [207.024530] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [207.025196] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [207.026268] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [207.029704] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [207.038447] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [207.040240] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [207.041551] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [207.045475] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [207.046554] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [207.054526] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [207.055044] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [207.055231] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [207.061040] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.063072] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.065128] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.067152] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.069214] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.071088] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.073259] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.075541] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.079767] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.081732] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.083593] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.085598] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.087797] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.089587] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.091580] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.093769] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.095479] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [207.095503] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [207.095515] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [207.095526] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [207.095537] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [207.095549] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [207.095564] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [207.095578] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [207.095593] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [207.095649] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [207.096151] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [207.097525] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [207.097952] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [207.101217] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [207.101889] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [207.101989] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [207.102326] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [207.102418] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [207.102422] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [207.102512] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [207.103753] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [207.103757] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [207.103846] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [207.128862] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [207.128866] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [207.128868] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [207.128871] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [207.128873] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [207.128875] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [207.128878] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [207.128881] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [207.128884] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [207.129049] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [207.129154] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [207.129484] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [207.129571] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [207.129582] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [207.133739] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [207.206565] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [207.207432] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [207.208273] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [207.209223] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [207.210169] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [207.262332] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [207.263031] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [207.267710] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [207.272473] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [207.273343] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [207.274193] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [207.275163] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [207.279843] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [207.291421] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [207.293072] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [207.294409] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [207.298658] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [207.300498] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [207.313441] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [207.313873] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [207.314123] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [207.321262] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.323342] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.325353] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.327408] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.329454] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.331496] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.333541] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.335585] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.339726] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.341684] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.343687] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.345679] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.347690] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.349679] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.351669] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.353636] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.355433] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [207.355449] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [207.355457] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [207.355464] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [207.355470] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [207.355477] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [207.355485] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [207.355492] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [207.355500] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [207.355534] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [207.355856] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [207.357623] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [207.357886] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [207.360821] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [207.361389] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [207.361517] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [207.361993] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [207.362119] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [207.362124] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [207.362248] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [207.363649] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [207.363654] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [207.363782] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [207.388787] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [207.388792] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [207.388795] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [207.388798] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [207.388802] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [207.388805] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [207.388809] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [207.388812] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [207.388816] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [207.389186] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [207.389323] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [207.389807] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [207.389934] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [207.389952] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [207.394248] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [207.462621] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [207.463663] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [207.464532] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [207.465355] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [207.466176] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [207.517069] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [207.517862] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [207.522505] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [207.527382] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [207.528015] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [207.529024] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [207.529917] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [207.532917] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [207.541515] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [207.543376] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [207.544632] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [207.548982] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [207.550117] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [207.557721] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [207.558176] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [207.558359] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [207.564663] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.566504] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.568476] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.570436] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.572404] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.574329] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.576214] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.578359] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.582619] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.584463] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.586542] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.588500] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.590654] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.592499] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.594463] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.596409] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.598115] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [207.598145] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [207.598159] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [207.598171] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [207.598181] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [207.598192] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [207.598205] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [207.598217] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [207.598269] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [207.598344] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [207.598588] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [207.600084] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [207.600520] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [207.603179] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [207.603829] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [207.603993] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [207.604329] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [207.604420] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [207.604424] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [207.604511] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [207.605749] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [207.605753] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [207.605840] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [207.630793] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [207.630797] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [207.630800] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [207.630802] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [207.630804] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [207.630806] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [207.630809] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [207.630812] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [207.630815] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [207.631072] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [207.631167] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [207.631515] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [207.631603] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [207.631615] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [207.635841] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [207.710480] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [207.711340] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [207.712011] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [207.712675] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [207.713343] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [207.766406] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [207.767105] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [207.771973] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [207.776622] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [207.777288] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [207.778258] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [207.778960] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [207.783223] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [207.793752] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [207.795453] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [207.796609] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [207.799668] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [207.801129] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [207.809934] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [207.810364] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [207.810518] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [207.818171] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.820256] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.822283] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.824622] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.826656] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.829110] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.831143] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.833244] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.837687] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.839657] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.841912] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.844152] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.846245] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.848339] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.850562] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.852613] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [207.854603] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [207.854622] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [207.854631] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [207.854638] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [207.854646] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [207.854653] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [207.854662] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [207.854670] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [207.854679] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [207.854718] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [207.855066] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [207.856771] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [207.857047] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [207.859913] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [207.860517] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [207.860665] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [207.861136] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [207.861272] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [207.861278] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [207.861402] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [207.862790] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [207.862795] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [207.862923] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [207.887940] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [207.887945] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [207.887948] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [207.887951] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [207.887954] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [207.887957] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [207.887962] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [207.887965] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [207.887969] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [207.888341] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [207.888468] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [207.888946] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [207.889072] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [207.889090] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [207.893271] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [207.966500] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [207.967500] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [207.968339] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [207.969120] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [207.969916] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [208.050402] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [208.051074] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [208.055791] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [208.060415] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [208.061000] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [208.061758] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [208.062435] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [208.065812] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [208.074325] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [208.075875] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [208.077039] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [208.080018] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [208.080996] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [208.090556] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [208.091059] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [208.091243] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [208.097042] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.099069] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.101108] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.103210] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.105257] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.107144] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.109252] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.111340] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.115128] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.117239] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.119130] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.121039] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.122931] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.124995] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.127955] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.130007] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.131906] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [208.131937] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [208.131950] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [208.131961] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [208.131972] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [208.131984] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [208.131999] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [208.132013] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [208.132027] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [208.132081] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [208.132397] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [208.133741] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [208.134167] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [208.136850] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [208.137511] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [208.137619] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [208.137967] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [208.138064] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [208.138068] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [208.138171] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [208.139421] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [208.139425] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [208.139513] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [208.164781] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [208.164784] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [208.164787] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [208.164789] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [208.164791] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [208.164794] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [208.164797] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [208.164799] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [208.164802] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [208.164955] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [208.165046] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [208.165377] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [208.165465] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [208.165476] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [208.169588] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [208.238465] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [208.239348] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [208.240106] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [208.240785] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [208.241503] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [208.290991] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [208.291661] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [208.296282] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [208.300831] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [208.301487] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [208.302257] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [208.303281] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [208.307232] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [208.318104] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [208.320196] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [208.321557] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [208.325672] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [208.327520] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [208.340184] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [208.340505] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [208.340801] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [208.347446] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.349419] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.351460] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.353441] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.355415] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.357490] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.359540] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.361498] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.365634] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.367592] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.369509] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.371547] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.373543] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.375551] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.377495] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.379543] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.381208] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [208.381223] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [208.381228] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [208.381233] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [208.381237] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [208.381242] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [208.381248] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [208.381254] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [208.381260] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [208.381285] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [208.381516] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [208.383258] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [208.383443] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [208.386266] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [208.386783] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [208.386915] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [208.387352] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [208.387440] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [208.387444] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [208.387531] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [208.388886] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [208.388889] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [208.388977] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [208.414183] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [208.414188] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [208.414190] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [208.414192] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [208.414194] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [208.414196] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [208.414199] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [208.414202] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [208.414204] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [208.414572] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [208.414663] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [208.415092] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [208.415202] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [208.415218] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [208.419381] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [208.494299] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [208.495288] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [208.496065] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [208.497271] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [208.497992] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [208.541323] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [208.541910] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [208.546589] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [208.551279] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [208.551846] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [208.552527] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [208.553441] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [208.556603] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [208.566147] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [208.569274] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [208.570759] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [208.574047] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [208.575316] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [208.583197] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [208.583664] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [208.583825] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [208.589748] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.591567] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.593403] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.595416] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.597252] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.599105] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.601054] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.603125] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.606821] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.608829] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.610671] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.612506] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.614346] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.616251] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.618181] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.620029] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.621661] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [208.621686] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [208.621697] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [208.621707] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [208.621716] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [208.621726] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [208.621738] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [208.621750] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [208.621761] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [208.621805] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [208.622140] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [208.623586] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [208.623919] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [208.626594] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [208.627158] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [208.627251] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [208.627583] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [208.627672] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [208.627676] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [208.627763] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [208.629004] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [208.629008] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [208.629104] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [208.654066] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [208.654070] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [208.654072] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [208.654082] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [208.654086] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [208.654090] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [208.654095] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [208.654097] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [208.654101] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [208.654356] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [208.654443] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [208.654780] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [208.654869] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [208.654881] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [208.659106] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [208.734437] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [208.735328] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [208.735993] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [208.736691] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [208.737527] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [208.785694] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [208.786408] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [208.786936] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [208.787592] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A] <7> [208.788141] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [208.788657] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [208.789209] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2 <7> [208.789774] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [208.790474] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [208.790895] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [208.791461] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037 <7> [208.791867] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59 <7> [208.792321] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [208.792731] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 <7> [208.793063] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 <7> [208.793138] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 <7> [208.793223] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 594000 num active planes 1 <7> [208.793313] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000 <7> [208.793402] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000 <7> [208.793491] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624 <7> [208.793592] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz <7> [208.793693] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated TC PLL 2 <7> [208.793781] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving TC PLL 2 <7> [208.793868] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset] <7> [208.793958] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [208.794047] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [208.794154] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [208.794250] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [208.794344] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [208.794438] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [208.794531] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 <7> [208.794628] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [208.794724] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [208.794817] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [208.794909] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [208.795000] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [208.795103] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [208.795195] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00 <7> [208.795287] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11 <7> [208.795376] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00 <7> [208.795468] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [208.795557] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [208.795647] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36 <7> [208.795738] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125 <7> [208.795827] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [208.795917] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [208.796008] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [208.796115] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [208.796206] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [208.796296] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [208.796388] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [208.796480] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [208.796570] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [208.796660] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [208.796750] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [208.796839] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [208.796929] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [208.797019] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000 <7> [208.797131] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [208.797228] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c <7> [208.797322] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110 <7> [208.797415] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c <7> [208.797506] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1 <7> [208.797597] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a <7> [208.797688] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81 <7> [208.797779] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000 <7> [208.797870] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001 <7> [208.797961] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000 <7> [208.798052] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [208.798182] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000 <7> [208.798273] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00 <7> [208.798365] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [208.798456] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [208.798548] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [208.798640] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [208.798733] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [208.798823] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [208.798913] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [208.799008] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [208.799114] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [208.799208] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [208.799300] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [208.799391] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [208.799484] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [208.799576] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [208.799669] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [208.799760] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [208.799852] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7> [208.799942] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7> [208.800034] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7> [208.800140] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7> [208.800232] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7> [208.800639] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [208.800876] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [208.801370] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [208.801711] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000) <7> [208.801809] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [208.802171] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F] <7> [208.802263] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A] <7> [208.802351] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B] <7> [208.802439] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C] <7> [208.802526] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D] <7> [208.802608] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G] <7> [208.802689] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A] <7> [208.802771] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B] <7> [208.802852] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C] <7> [208.802932] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D] <7> [208.803013] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H] <7> [208.803107] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I] <7> [208.803194] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A] <7> [208.803276] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B] <7> [208.803361] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C] <7> [208.803445] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D] <7> [208.803744] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [208.803909] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [208.804198] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [208.804306] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:150:pipe A] <7> [208.804401] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2 <7> [208.807018] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [208.811943] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [208.821483] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [208.823103] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [208.823551] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a <7> [208.825064] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [208.825620] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1 <7> [208.832576] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Clock recovery OK <7> [208.832776] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3 <7> [208.839723] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful <7> [208.840003] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4 <7> [208.841325] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [208.858935] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G] Enable audio codec on [CRTC:150:pipe A], 40 bytes ELD <7> [208.875976] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:526:DP-2] <7> [208.876878] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A] <7> [208.882190] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [208.884221] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <6> [208.884750] pcieport 0000:00:01.0: PME: Spurious native interrupt! <7> [208.886815] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [208.891222] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [208.893592] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [208.908119] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [208.910240] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [208.912139] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [208.917088] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [208.918600] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [208.927921] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [208.928123] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [208.928297] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [208.935662] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.937568] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.939474] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.941411] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.942106] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [208.942545] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [208.945246] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.947281] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.949481] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.951443] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.955495] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.957477] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.959445] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.961472] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.963459] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.965440] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.967477] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.969458] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [208.971222] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [208.971236] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [208.971242] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [208.971247] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [208.971251] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [208.971256] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [208.971262] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [208.971268] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [208.971274] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [208.971299] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [208.971527] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [208.973210] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [208.973396] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [208.976246] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [208.976780] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [208.976890] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [208.977328] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [208.977415] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [208.977419] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [208.977508] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [208.978859] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [208.978862] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [208.978952] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [209.004165] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [209.004169] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [209.004171] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [209.004173] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [209.004176] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [209.004178] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [209.004181] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [209.004183] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [209.004186] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [209.004350] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [209.004439] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [209.004877] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [209.004963] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [209.004974] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [209.009315] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [209.013771] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:538:HDMI-A-3] Limiting target display pipe bpp to 30 (EDID bpp 36, max requested bpp 30, max platform bpp 36) <7> [209.013894] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30) <7> [209.013990] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [209.014102] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B] <7> [209.014206] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [209.014307] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [209.014403] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3 <7> [209.014527] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [209.014614] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [209.014692] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [209.014825] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:538:HDMI-A-3] Limiting target display pipe bpp to 30 (EDID bpp 36, max requested bpp 30, max platform bpp 36) <7> [209.014931] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30) <7> [209.015035] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [209.015138] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B] <7> [209.015237] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [209.015337] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [209.015432] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3 <7> [209.015576] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:538:HDMI-A-3] Limiting target display pipe bpp to 30 (EDID bpp 36, max requested bpp 30, max platform bpp 36) <7> [209.015678] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30) <7> [209.015774] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [209.015869] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B] <7> [209.015967] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [209.016078] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [209.016172] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3 <7> [209.016279] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [209.016366] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [209.016444] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [209.016590] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:538:HDMI-A-3] Limiting target display pipe bpp to 30 (EDID bpp 36, max requested bpp 30, max platform bpp 36) <7> [209.016692] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30) <7> [209.016785] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [209.016884] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B] <7> [209.016983] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [209.017090] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [209.017188] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3 <7> [209.017292] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [209.017377] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [209.017453] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [209.017552] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989 <7> [209.017625] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59 <7> [209.017696] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989 <7> [209.017768] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59 <7> [209.017839] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [209.017916] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 <7> [209.017990] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 <7> [209.018073] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 <7> [209.018164] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 594000 num active planes 1 <7> [209.018264] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000 <7> [209.018362] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000 <7> [209.018456] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248 <7> [209.018561] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz <7> [209.018666] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated TC PLL 3 <7> [209.018762] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving TC PLL 3 <7> [209.018856] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset] <7> [209.018956] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [209.019059] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0 <7> [209.019161] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [209.019254] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [209.019348] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [209.019441] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [209.019533] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [209.019627] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [209.019721] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [209.019723] xe 0000:03:00.0: colorspace: RGB <7> [209.019724] xe 0000:03:00.0: scan mode: Underscan <7> [209.019725] xe 0000:03:00.0: colorimetry: No Data <7> [209.019726] xe 0000:03:00.0: picture aspect: No Data <7> [209.019727] xe 0000:03:00.0: active aspect: Same as Picture <7> [209.019728] xe 0000:03:00.0: itc: No Data <7> [209.019729] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [209.019730] xe 0000:03:00.0: quantization range: Full <7> [209.019731] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [209.019732] xe 0000:03:00.0: video code: 0 <7> [209.019733] xe 0000:03:00.0: ycc quantization range: Full <7> [209.019734] xe 0000:03:00.0: hdmi content type: Graphics <7> [209.019735] xe 0000:03:00.0: pixel repeat: 0 <7> [209.019736] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [209.019738] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [209.019739] xe 0000:03:00.0: vendor: Intel <7> [209.019740] xe 0000:03:00.0: product: Discrete gfx <7> [209.019741] xe 0000:03:00.0: source device information: PC General (0x9) <7> [209.019743] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [209.019744] xe 0000:03:00.0: empty frame <7> [209.019745] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 07 00 66 10 00 01 00 00 00 00 00 00 00 00 <7> [209.019837] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 05 e3 cd 0c 32 38 45 38 35 30 09 07 07 00 00 00 <7> [209.019929] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [209.020023] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [209.020128] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37 <7> [209.020222] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [209.020315] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [209.020408] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9 <7> [209.020501] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9 <7> [209.020594] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9 <7> [209.020687] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9 <7> [209.020779] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9 <7> [209.020873] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 185625, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [209.020965] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [209.021062] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [209.021155] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [209.021247] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [209.021344] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [209.021439] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [209.021533] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [209.021626] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [209.021719] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40c0 <7> [209.021811] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [209.021902] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x4a06 <7> [209.021993] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [209.022094] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [209.022188] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [209.022278] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [209.022369] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [209.022460] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0xae00 <7> [209.022551] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [209.022643] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [209.022734] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [209.022827] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [209.022918] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [209.023009] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [209.023112] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [209.023207] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [209.023298] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [209.023389] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [209.023482] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [209.023574] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [209.023664] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [209.023756] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [209.023847] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [209.023939] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [209.024034] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [209.024135] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [209.024230] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [209.024325] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no <7> [209.024417] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no <7> [209.024509] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no <7> [209.024602] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no <7> [209.024694] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no <7> [209.025586] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [209.025731] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000) <7> [209.025840] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F] <7> [209.025931] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A] <7> [209.026018] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B] <7> [209.026121] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C] <7> [209.026208] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D] <7> [209.026288] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G] <7> [209.026371] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A] <7> [209.026452] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B] <7> [209.026533] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C] <7> [209.026613] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D] <7> [209.026693] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H] <7> [209.026774] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I] <7> [209.026854] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A] <7> [209.026935] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B] <7> [209.027015] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C] <7> [209.027106] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D] <7> [209.042192] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [209.042495] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A) <7> [209.058792] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x2, on? 0) for [CRTC:268:pipe B] <7> [209.059059] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3 <7> [209.062175] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe B <7> [209.078066] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [209.081065] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:538:HDMI-A-3][ENCODER:537:DDI TC3/PHY H] Enable audio codec on [CRTC:268:pipe B], 32 bytes ELD <7> [209.097500] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000) <7> [209.098003] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N <7> [209.099009] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:538:HDMI-A-3] <7> [209.099816] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <6> [209.106391] [IGT] xe_pm: finished subtest d3hot-multiple-execs, SUCCESS <7> [209.107353] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <6> [209.108118] pcieport 0000:00:01.0: PME: Spurious native interrupt! <7> [209.126171] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [209.127951] [IGT] xe_pm: exiting, ret=0 <6> [209.148793] Console: switching to colour frame buffer device 240x67

<6> [203.814595] Console: switching to colour dummy device 80x25

<6> [204.900392] [IGT] xe_pm: starting subtest d3hot-multiple-execs

<7> [204.902531] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [204.902639] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [204.902754] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [204.902893] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A]

<7> [204.903029] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [204.903160] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [204.903287] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2

<7> [204.903458] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [204.903569] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2

<7> [204.903695] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2

<7> [204.903965] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [204.904091] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [204.904222] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [204.904353] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A]

<7> [204.904481] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [204.904611] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [204.904760] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2

<7> [204.904913] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [204.905025] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2

<7> [204.905146] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2

<7> [204.905357] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [204.905487] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [204.905611] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [204.905775] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A]

<7> [204.905915] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [204.906050] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [204.906178] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2

<7> [204.906322] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [204.906433] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2

<7> [204.906551] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2

<7> [204.906705] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0

<7> [204.906827] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0

<7> [204.906936] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [204.907042] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [204.907147] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [204.907250] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [204.907358] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 1989) -> ( 0 - 4037), size 1989 -> 4037

<7> [204.907464] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb (1989 - 2048) -> (4037 - 4096), size 59 -> 59

<7> [204.907587] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0

<7> [204.907834] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000

<7> [204.907951] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000

<7> [204.908048] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624

<7> [204.908164] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz

<7> [204.908276] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated TC PLL 2

<7> [204.908369] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving TC PLL 2

<7> [204.908464] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset]

<7> [204.908563] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [204.908660] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0

<7> [204.908774] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [204.908869] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [204.908963] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [204.909055] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [204.909147] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64

<7> [204.909238] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [204.909331] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [204.909426] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [204.909518] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [204.909610] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [204.909708] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [204.909801] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00

<7> [204.909898] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11

<7> [204.909995] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00

<7> [204.910088] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [204.910181] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [204.910273] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36

<7> [204.910365] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125

<7> [204.910456] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [204.910548] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [204.910639] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [204.910743] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [204.910838] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [204.910929] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [204.911020] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [204.911110] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [204.911199] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [204.911289] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [204.911379] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [204.911469] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [204.911569] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [204.911661] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000

<7> [204.911778] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [204.911893] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c

<7> [204.911987] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110

<7> [204.912077] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c

<7> [204.912167] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1

<7> [204.912257] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a

<7> [204.912349] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81

<7> [204.912444] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000

<7> [204.912537] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001

<7> [204.912629] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000

<7> [204.912728] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [204.912821] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000

<7> [204.912912] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00

<7> [204.913002] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [204.913091] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [204.913179] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [204.913269] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [204.913358] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [204.913446] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [204.913534] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [204.913627] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [204.913722] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [204.913812] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [204.913901] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [204.913990] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [204.914080] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [204.914169] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [204.914260] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [204.914349] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no

<7> [204.914438] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no

<7> [204.914528] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no

<7> [204.914618] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no

<7> [204.914716] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no

<7> [204.915390] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G] Disable audio codec on [CRTC:150:pipe A]

<7> [204.938631] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E

<7> [204.939270] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [204.960685] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [204.962902] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<7> [204.963423] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:150:pipe A]

<7> [204.965630] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2

<7> [204.966229] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F]

<7> [204.966490] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A]

<7> [204.966766] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B]

<7> [204.967017] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C]

<7> [204.967263] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D]

<7> [204.967496] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G]

<7> [204.967739] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A]

<7> [204.967972] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B]

<7> [204.968197] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C]

<7> [204.968417] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D]

<7> [204.968623] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H]

<7> [204.968851] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I]

<7> [204.969059] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A]

<7> [204.969254] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B]

<7> [204.969449] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C]

<7> [204.969641] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D]

<7> [204.971643] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: B)

<7> [204.971876] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [204.976041] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A

<7> [204.976280] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000)

<7> [204.976761] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:526:DP-2]

<7> [204.977189] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A]

<7> [204.977813] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:538:HDMI-A-3] Limiting target display pipe bpp to 30 (EDID bpp 36, max requested bpp 30, max platform bpp 36)

<7> [204.978021] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30)

<7> [204.978209] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [204.978391] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B]

<7> [204.978572] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [204.978766] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [204.978941] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3

<7> [204.979156] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [204.979293] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0

<7> [204.979455] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0

<7> [204.979580] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb (4037 - 4096) -> ( 0 - 0), size 59 -> 0

<7> [204.979721] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [204.979840] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [204.979958] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [204.980073] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [204.980201] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [204.980352] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000

<7> [204.980497] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000

<7> [204.980637] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0

<7> [204.980812] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz

<7> [204.980959] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated TC PLL 3

<7> [204.981094] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving TC PLL 3

<7> [204.981227] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset]

<7> [204.981359] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [204.981486] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0

<7> [204.981609] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [204.981729] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [204.981823] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [204.981908] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [204.981995] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [204.982079] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [204.982163] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [204.982166] xe 0000:03:00.0: scan mode: Underscan

<7> [204.982167] xe 0000:03:00.0: colorimetry: No Data

<7> [204.982168] xe 0000:03:00.0: picture aspect: No Data

<7> [204.982169] xe 0000:03:00.0: active aspect: Same as Picture

<7> [204.982171] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [204.982171] xe 0000:03:00.0: quantization range: Full

<7> [204.982172] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [204.982174] xe 0000:03:00.0: ycc quantization range: Full

<7> [204.982175] xe 0000:03:00.0: hdmi content type: Graphics

<7> [204.982177] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [204.982178] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [204.982181] xe 0000:03:00.0: product: Discrete gfx

<7> [204.982182] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [204.982183] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [204.982185] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 07 00 66 10 00 01 00 00 00 00 00 00 00 00

<7> [204.982268] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 05 e3 cd 0c 32 38 45 38 35 30 09 07 07 00 00 00

<7> [204.982352] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [204.982436] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [204.982519] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37

<7> [204.982602] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [204.982703] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [204.982792] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9

<7> [204.982876] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9

<7> [204.982961] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9

<7> [204.983046] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9

<7> [204.983130] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9

<7> [204.983215] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 185625, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [204.983299] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [204.983383] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [204.983466] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [204.983550] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [204.983636] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [204.983734] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [204.983820] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [204.983904] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [204.983988] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40c0

<7> [204.984071] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [204.984154] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x4a06

<7> [204.984237] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [204.984321] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [204.984404] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [204.984488] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [204.984570] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [204.984657] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0xae00

<7> [204.984752] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [204.984839] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [204.984923] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [204.985007] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [204.985090] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [204.985173] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [204.985257] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [204.985340] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [204.985423] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [204.985507] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [204.985592] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [204.985679] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [204.985767] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [204.985849] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [204.985932] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [204.986016] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [204.986099] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [204.986183] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [204.986266] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no

<7> [204.986349] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no

<7> [204.986432] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no

<7> [204.986516] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no

<7> [204.986599] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no

<7> [204.987270] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:538:HDMI-A-3][ENCODER:537:DDI TC3/PHY H] Disable audio codec on [CRTC:268:pipe B]

<7> [205.009167] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F

<7> [205.009850] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe B

<7> [205.022589] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<7> [205.030952] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x2, on? 1) for [CRTC:268:pipe B]

<7> [205.033387] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3

<7> [205.034199] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F]

<7> [205.034686] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A]

<7> [205.035132] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B]

<7> [205.035572] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C]

<7> [205.036087] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D]

<7> [205.036536] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G]

<7> [205.037007] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A]

<7> [205.037436] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B]

<7> [205.037891] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C]

<7> [205.038310] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D]

<7> [205.038738] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H]

<7> [205.039136] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I]

<7> [205.039501] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A]

<7> [205.039939] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B]

<7> [205.040312] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C]

<7> [205.040659] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D]

<7> [205.041235] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [205.041785] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [205.042290] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [205.043109] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [205.043629] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xaa000000)

<7> [205.044181] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [205.044666] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [205.044923] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]

<7> [205.071697] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [205.073618] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [205.074770] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [205.075721] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [205.076461] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [205.324247] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [205.324433] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [205.328554] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [205.332669] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [205.332882] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [205.333110] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [205.333266] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [205.335891] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [205.344579] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [205.346203] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [205.347492] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [205.351094] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [205.352290] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [205.361147] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [205.361252] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [205.361349] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [205.367372] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.369279] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.371180] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.373095] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.374960] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.376993] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.378969] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.380973] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.385180] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.387123] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.389047] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.391058] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.392963] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.394966] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.397027] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.398971] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.400762] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [205.400775] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [205.400780] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [205.400785] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [205.400789] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [205.400794] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [205.400800] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [205.400806] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [205.400811] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [205.400839] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [205.401059] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [205.402768] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [205.402953] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [205.405805] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [205.406323] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [205.406414] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [205.406849] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [205.406938] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [205.406943] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [205.407030] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [205.408381] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [205.408385] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [205.408478] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [205.433984] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [205.433988] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [205.433991] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [205.433993] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [205.433995] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [205.433997] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [205.434000] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [205.434003] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [205.434006] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [205.434159] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [205.434248] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [205.434681] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [205.434769] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [205.434781] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [205.438903] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [205.510910] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [205.511929] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [205.512722] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [205.513477] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [205.514282] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [205.557206] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [205.557839] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [205.562431] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [205.567076] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [205.567602] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [205.568185] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [205.568798] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [205.571933] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [205.582139] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [205.583763] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [205.584865] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [205.590393] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [205.592271] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [205.605521] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [205.605844] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [205.606126] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [205.612616] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.614619] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.616668] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.618715] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.620763] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.622948] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.624975] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.626934] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.630989] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.632978] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.634925] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.636935] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.638971] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.640975] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.642950] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.644939] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.646732] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [205.646747] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [205.646754] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [205.646759] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [205.646764] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [205.646769] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [205.646776] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [205.646783] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [205.646789] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [205.646817] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [205.647073] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [205.648817] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [205.649023] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [205.651879] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [205.652416] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [205.652507] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [205.652964] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [205.653052] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [205.653057] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [205.653145] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [205.654495] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [205.654498] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [205.654600] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [205.679669] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [205.679673] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [205.679675] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [205.679678] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [205.679680] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [205.679682] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [205.679685] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [205.679688] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [205.679691] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [205.680063] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [205.680155] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [205.680601] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [205.680690] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [205.680701] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [205.684833] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [205.758863] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [205.759811] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [205.760608] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [205.761339] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [205.762118] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [205.795389] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [205.796012] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [205.800674] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [205.805217] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [205.805835] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [205.806720] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [205.807556] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [205.811484] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [205.822660] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [205.824599] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [205.825986] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [205.830723] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [205.832605] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [205.844032] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [205.844283] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [205.844433] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [205.850863] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.852823] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.854747] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.856759] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.858957] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.860881] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.862926] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.864923] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.868931] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.870932] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.872880] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.874911] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.876890] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.878923] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.880879] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.882819] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [205.884522] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [205.884533] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [205.884539] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [205.884544] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [205.884549] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [205.884555] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [205.884562] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [205.884569] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [205.884575] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [205.884603] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [205.884864] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [205.886673] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [205.886963] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [205.889953] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [205.890567] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [205.890699] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [205.891185] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [205.891319] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [205.891325] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [205.891454] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [205.892887] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [205.892892] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [205.893023] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [205.918024] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [205.918028] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [205.918030] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [205.918033] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [205.918035] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [205.918037] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [205.918040] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [205.918043] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [205.918046] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [205.918416] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [205.918521] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [205.919007] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [205.919139] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [205.919156] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [205.923307] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [205.990641] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [205.991620] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [205.992409] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [205.993209] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [205.993985] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [206.043905] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [206.044567] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [206.049197] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [206.053824] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [206.054368] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [206.055127] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [206.056026] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [206.059407] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [206.067759] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [206.069337] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [206.071293] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [206.076986] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [206.078883] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [206.091040] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [206.091319] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [206.091558] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [206.097966] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.099901] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.101895] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.103848] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.105889] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.107846] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.109888] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.111883] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.115913] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.117893] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.119890] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.121841] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.123885] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.125900] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.127869] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.129853] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.131638] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [206.131651] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [206.131657] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [206.131662] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [206.131667] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [206.131672] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [206.131679] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [206.131685] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [206.131691] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [206.131716] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [206.131959] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [206.133737] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [206.134012] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [206.136960] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [206.137565] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [206.137699] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [206.138186] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [206.138316] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [206.138322] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [206.138451] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [206.139887] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [206.139892] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [206.140021] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [206.165269] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [206.165273] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [206.165275] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [206.165277] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [206.165280] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [206.165282] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [206.165285] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [206.165288] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [206.165291] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [206.165671] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [206.165812] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [206.166290] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [206.166418] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [206.166435] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [206.171037] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [206.238731] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [206.239689] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [206.240490] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [206.241223] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [206.242004] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [206.280260] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [206.280957] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [206.285719] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [206.290337] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [206.290983] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [206.291858] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [206.292554] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [206.296093] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [206.306593] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [206.308163] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [206.309368] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [206.314156] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [206.316024] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [206.329403] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [206.329748] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [206.329871] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [206.336468] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.338519] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.340724] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.342791] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.344866] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.346825] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.348865] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.351085] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.355191] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.357397] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.359694] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.362194] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.364157] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.366360] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.368644] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.370718] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.372568] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [206.372586] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [206.372593] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [206.372599] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [206.372605] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [206.372611] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [206.372619] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [206.372627] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [206.372634] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [206.372664] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [206.372959] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [206.374776] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [206.375006] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [206.377894] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [206.378462] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [206.378553] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [206.378990] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [206.379075] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [206.379080] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [206.379163] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [206.380513] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [206.380517] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [206.380604] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [206.405541] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [206.405545] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [206.405547] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [206.405549] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [206.405551] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [206.405553] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [206.405556] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [206.405558] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [206.405561] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [206.405712] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [206.405795] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [206.406222] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [206.406301] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [206.406311] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [206.410418] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [206.478442] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [206.479271] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [206.480073] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [206.480842] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [206.481577] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [206.528062] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [206.528676] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [206.533263] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [206.537837] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [206.538362] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [206.539061] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [206.539758] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [206.543262] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [206.554030] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [206.555750] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [206.557683] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [206.563242] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [206.565124] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [206.578535] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [206.578885] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [206.579134] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [206.586060] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.588027] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.590032] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.591955] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.593907] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.595853] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.597840] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.599805] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.604188] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.606154] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.608096] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.610056] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.611992] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.613919] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.615860] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.617827] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.619565] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [206.619579] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [206.619584] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [206.619590] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [206.619594] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [206.619599] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [206.619606] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [206.619612] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [206.619618] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [206.619643] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [206.619883] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [206.621616] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [206.621811] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [206.624656] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [206.625181] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [206.625327] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [206.625788] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [206.625939] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [206.625944] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [206.626077] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [206.627487] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [206.627491] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [206.627587] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [206.652794] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [206.652798] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [206.652801] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [206.652803] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [206.652805] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [206.652807] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [206.652811] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [206.652813] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [206.652816] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [206.653173] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [206.653266] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [206.653700] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [206.653846] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [206.653863] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [206.658014] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [206.726754] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [206.727716] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [206.728515] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [206.729252] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [206.730041] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [206.763734] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [206.764395] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [206.769001] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [206.773676] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [206.774608] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [206.775394] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [206.776452] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [206.780693] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [206.792961] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [206.794731] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [206.796374] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [206.801218] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [206.803064] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [206.816462] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [206.816822] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [206.817149] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [206.823746] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.825786] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.827793] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.829781] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.831776] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.833749] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.835748] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.837748] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.841868] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.843806] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.845766] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.847741] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.849790] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.852028] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.853977] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.855915] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [206.857605] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [206.857617] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [206.857624] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [206.857630] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [206.857637] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [206.857643] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [206.857651] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [206.857658] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [206.857666] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [206.857693] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [206.857967] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [206.859679] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [206.859903] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [206.862794] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [206.863349] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [206.863442] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [206.863879] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [206.863968] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [206.863973] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [206.864059] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [206.865405] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [206.865409] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [206.865498] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [206.890703] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [206.890707] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [206.890709] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [206.890712] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [206.890714] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [206.890716] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [206.890719] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [206.890722] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [206.890725] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [206.891097] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [206.891188] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [206.891624] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [206.891711] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [206.891722] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [206.895844] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [206.966648] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [206.967672] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [206.968491] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [206.969223] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [206.970008] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [207.014047] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [207.014789] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [207.019365] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [207.023908] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [207.024530] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [207.025196] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [207.026268] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [207.029704] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [207.038447] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [207.040240] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [207.041551] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [207.045475] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [207.046554] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [207.054526] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [207.055044] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [207.055231] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [207.061040] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.063072] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.065128] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.067152] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.069214] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.071088] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.073259] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.075541] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.079767] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.081732] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.083593] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.085598] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.087797] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.089587] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.091580] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.093769] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.095479] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [207.095503] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [207.095515] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [207.095526] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [207.095537] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [207.095549] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [207.095564] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [207.095578] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [207.095593] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [207.095649] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [207.096151] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [207.097525] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [207.097952] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [207.101217] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [207.101889] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [207.101989] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [207.102326] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [207.102418] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [207.102422] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [207.102512] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [207.103753] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [207.103757] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [207.103846] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [207.128862] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [207.128866] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [207.128868] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [207.128871] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [207.128873] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [207.128875] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [207.128878] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [207.128881] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [207.128884] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [207.129049] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [207.129154] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [207.129484] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [207.129571] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [207.129582] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [207.133739] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [207.206565] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [207.207432] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [207.208273] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [207.209223] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [207.210169] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [207.262332] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [207.263031] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [207.267710] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [207.272473] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [207.273343] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [207.274193] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [207.275163] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [207.279843] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [207.291421] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [207.293072] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [207.294409] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [207.298658] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [207.300498] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [207.313441] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [207.313873] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [207.314123] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [207.321262] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.323342] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.325353] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.327408] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.329454] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.331496] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.333541] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.335585] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.339726] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.341684] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.343687] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.345679] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.347690] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.349679] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.351669] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.353636] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.355433] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [207.355449] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [207.355457] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [207.355464] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [207.355470] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [207.355477] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [207.355485] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [207.355492] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [207.355500] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [207.355534] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [207.355856] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [207.357623] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [207.357886] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [207.360821] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [207.361389] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [207.361517] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [207.361993] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [207.362119] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [207.362124] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [207.362248] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [207.363649] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [207.363654] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [207.363782] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [207.388787] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [207.388792] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [207.388795] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [207.388798] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [207.388802] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [207.388805] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [207.388809] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [207.388812] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [207.388816] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [207.389186] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [207.389323] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [207.389807] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [207.389934] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [207.389952] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [207.394248] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [207.462621] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [207.463663] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [207.464532] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [207.465355] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [207.466176] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [207.517069] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [207.517862] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [207.522505] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [207.527382] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [207.528015] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [207.529024] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [207.529917] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [207.532917] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [207.541515] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [207.543376] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [207.544632] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [207.548982] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [207.550117] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [207.557721] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [207.558176] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [207.558359] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [207.564663] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.566504] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.568476] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.570436] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.572404] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.574329] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.576214] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.578359] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.582619] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.584463] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.586542] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.588500] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.590654] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.592499] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.594463] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.596409] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.598115] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [207.598145] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [207.598159] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [207.598171] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [207.598181] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [207.598192] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [207.598205] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [207.598217] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [207.598269] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [207.598344] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [207.598588] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [207.600084] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [207.600520] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [207.603179] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [207.603829] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [207.603993] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [207.604329] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [207.604420] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [207.604424] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [207.604511] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [207.605749] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [207.605753] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [207.605840] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [207.630793] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [207.630797] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [207.630800] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [207.630802] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [207.630804] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [207.630806] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [207.630809] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [207.630812] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [207.630815] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [207.631072] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [207.631167] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [207.631515] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [207.631603] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [207.631615] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [207.635841] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [207.710480] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [207.711340] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [207.712011] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [207.712675] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [207.713343] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [207.766406] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [207.767105] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [207.771973] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [207.776622] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [207.777288] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [207.778258] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [207.778960] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [207.783223] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [207.793752] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [207.795453] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [207.796609] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [207.799668] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [207.801129] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [207.809934] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [207.810364] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [207.810518] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [207.818171] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.820256] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.822283] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.824622] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.826656] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.829110] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.831143] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.833244] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.837687] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.839657] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.841912] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.844152] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.846245] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.848339] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.850562] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.852613] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [207.854603] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [207.854622] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [207.854631] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [207.854638] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [207.854646] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [207.854653] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [207.854662] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [207.854670] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [207.854679] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [207.854718] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [207.855066] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [207.856771] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [207.857047] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [207.859913] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [207.860517] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [207.860665] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [207.861136] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [207.861272] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [207.861278] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [207.861402] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [207.862790] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [207.862795] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [207.862923] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [207.887940] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [207.887945] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [207.887948] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [207.887951] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [207.887954] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [207.887957] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [207.887962] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [207.887965] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [207.887969] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [207.888341] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [207.888468] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [207.888946] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [207.889072] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [207.889090] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [207.893271] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [207.966500] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [207.967500] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [207.968339] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [207.969120] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [207.969916] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [208.050402] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [208.051074] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [208.055791] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [208.060415] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [208.061000] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [208.061758] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [208.062435] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [208.065812] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [208.074325] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [208.075875] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [208.077039] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [208.080018] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [208.080996] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [208.090556] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [208.091059] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [208.091243] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [208.097042] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.099069] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.101108] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.103210] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.105257] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.107144] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.109252] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.111340] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.115128] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.117239] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.119130] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.121039] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.122931] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.124995] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.127955] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.130007] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.131906] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [208.131937] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [208.131950] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [208.131961] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [208.131972] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [208.131984] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [208.131999] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [208.132013] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [208.132027] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [208.132081] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [208.132397] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [208.133741] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [208.134167] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [208.136850] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [208.137511] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [208.137619] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [208.137967] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [208.138064] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [208.138068] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [208.138171] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [208.139421] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [208.139425] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [208.139513] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [208.164781] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [208.164784] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [208.164787] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [208.164789] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [208.164791] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [208.164794] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [208.164797] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [208.164799] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [208.164802] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [208.164955] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [208.165046] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [208.165377] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [208.165465] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [208.165476] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [208.169588] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [208.238465] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [208.239348] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [208.240106] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [208.240785] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [208.241503] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [208.290991] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [208.291661] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [208.296282] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [208.300831] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [208.301487] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [208.302257] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [208.303281] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [208.307232] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [208.318104] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [208.320196] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [208.321557] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [208.325672] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [208.327520] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [208.340184] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [208.340505] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [208.340801] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [208.347446] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.349419] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.351460] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.353441] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.355415] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.357490] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.359540] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.361498] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.365634] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.367592] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.369509] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.371547] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.373543] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.375551] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.377495] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.379543] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.381208] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [208.381223] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [208.381228] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [208.381233] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [208.381237] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [208.381242] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [208.381248] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [208.381254] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [208.381260] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [208.381285] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [208.381516] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [208.383258] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [208.383443] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [208.386266] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [208.386783] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [208.386915] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [208.387352] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [208.387440] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [208.387444] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [208.387531] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [208.388886] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [208.388889] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [208.388977] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [208.414183] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [208.414188] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [208.414190] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [208.414192] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [208.414194] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [208.414196] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [208.414199] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [208.414202] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [208.414204] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [208.414572] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [208.414663] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [208.415092] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [208.415202] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [208.415218] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [208.419381] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [208.494299] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [208.495288] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [208.496065] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [208.497271] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [208.497992] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [208.541323] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [208.541910] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [208.546589] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [208.551279] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [208.551846] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [208.552527] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [208.553441] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [208.556603] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [208.566147] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [208.569274] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [208.570759] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [208.574047] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [208.575316] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [208.583197] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [208.583664] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [208.583825] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [208.589748] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.591567] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.593403] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.595416] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.597252] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.599105] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.601054] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.603125] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.606821] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.608829] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.610671] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.612506] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.614346] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.616251] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.618181] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.620029] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.621661] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [208.621686] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [208.621697] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [208.621707] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [208.621716] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [208.621726] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [208.621738] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [208.621750] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [208.621761] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [208.621805] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [208.622140] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [208.623586] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [208.623919] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [208.626594] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [208.627158] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [208.627251] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [208.627583] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [208.627672] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [208.627676] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [208.627763] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [208.629004] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [208.629008] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [208.629104] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [208.654066] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [208.654070] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [208.654072] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [208.654082] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [208.654086] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [208.654090] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [208.654095] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [208.654097] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [208.654101] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [208.654356] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [208.654443] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [208.654780] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [208.654869] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [208.654881] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [208.659106] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [208.734437] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [208.735328] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [208.735993] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [208.736691] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [208.737527] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [208.785694] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [208.786408] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [208.786936] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [208.787592] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A]

<7> [208.788141] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [208.788657] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [208.789209] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2

<7> [208.789774] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [208.790474] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [208.790895] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [208.791461] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037

<7> [208.791867] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59

<7> [208.792321] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [208.792731] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0

<7> [208.793063] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255

<7> [208.793138] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267

<7> [208.793223] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 594000 num active planes 1

<7> [208.793313] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000

<7> [208.793402] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000

<7> [208.793491] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624

<7> [208.793592] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz

<7> [208.793693] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated TC PLL 2

<7> [208.793781] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving TC PLL 2

<7> [208.793868] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset]

<7> [208.793958] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [208.794047] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0

<7> [208.794154] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [208.794250] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [208.794344] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [208.794438] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [208.794531] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64

<7> [208.794628] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [208.794724] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [208.794817] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [208.794909] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [208.795000] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [208.795103] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [208.795195] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00

<7> [208.795287] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11

<7> [208.795376] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00

<7> [208.795468] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [208.795557] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [208.795647] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36

<7> [208.795738] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125

<7> [208.795827] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [208.795917] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [208.796008] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [208.796115] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [208.796206] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [208.796296] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [208.796388] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [208.796480] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [208.796570] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [208.796660] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [208.796750] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [208.796839] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [208.796929] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [208.797019] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000

<7> [208.797131] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [208.797228] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c

<7> [208.797322] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110

<7> [208.797415] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c

<7> [208.797506] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1

<7> [208.797597] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a

<7> [208.797688] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81

<7> [208.797779] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000

<7> [208.797870] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001

<7> [208.797961] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000

<7> [208.798052] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [208.798182] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000

<7> [208.798273] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00

<7> [208.798365] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [208.798456] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [208.798548] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [208.798640] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [208.798733] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [208.798823] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [208.798913] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [208.799008] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [208.799114] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [208.799208] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [208.799300] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [208.799391] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [208.799484] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [208.799576] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [208.799669] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [208.799760] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [208.799852] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no

<7> [208.799942] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no

<7> [208.800034] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no

<7> [208.800140] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no

<7> [208.800232] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no

<7> [208.800639] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [208.800876] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [208.801370] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [208.801711] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000)

<7> [208.801809] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [208.802171] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F]

<7> [208.802263] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A]

<7> [208.802351] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B]

<7> [208.802439] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C]

<7> [208.802526] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D]

<7> [208.802608] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G]

<7> [208.802689] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A]

<7> [208.802771] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B]

<7> [208.802852] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C]

<7> [208.802932] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D]

<7> [208.803013] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H]

<7> [208.803107] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I]

<7> [208.803194] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A]

<7> [208.803276] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B]

<7> [208.803361] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C]

<7> [208.803445] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D]

<7> [208.803744] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [208.803909] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [208.804198] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [208.804306] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:150:pipe A]

<7> [208.804401] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2

<7> [208.807018] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [208.811943] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [208.821483] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [208.823103] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [208.823551] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a

<7> [208.825064] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [208.825620] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1

<7> [208.832576] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Clock recovery OK

<7> [208.832776] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3

<7> [208.839723] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful

<7> [208.840003] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4

<7> [208.841325] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [208.858935] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G] Enable audio codec on [CRTC:150:pipe A], 40 bytes ELD

<7> [208.875976] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:526:DP-2]

<7> [208.876878] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A]

<7> [208.882190] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [208.884221] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<6> [208.884750] pcieport 0000:00:01.0: PME: Spurious native interrupt!

<7> [208.886815] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [208.891222] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [208.893592] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [208.908119] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [208.910240] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [208.912139] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [208.917088] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [208.918600] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [208.927921] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [208.928123] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [208.928297] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [208.935662] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.937568] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.939474] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.941411] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.942106] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [208.942545] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [208.945246] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.947281] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.949481] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.951443] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.955495] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.957477] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.959445] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.961472] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.963459] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.965440] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.967477] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.969458] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [208.971222] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [208.971236] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [208.971242] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [208.971247] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [208.971251] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [208.971256] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [208.971262] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [208.971268] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [208.971274] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [208.971299] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [208.971527] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [208.973210] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [208.973396] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [208.976246] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [208.976780] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [208.976890] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [208.977328] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [208.977415] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [208.977419] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [208.977508] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [208.978859] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [208.978862] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [208.978952] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [209.004165] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [209.004169] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [209.004171] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [209.004173] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [209.004176] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [209.004178] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [209.004181] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [209.004183] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [209.004186] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [209.004350] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [209.004439] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [209.004877] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [209.004963] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [209.004974] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [209.009315] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [209.013771] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:538:HDMI-A-3] Limiting target display pipe bpp to 30 (EDID bpp 36, max requested bpp 30, max platform bpp 36)

<7> [209.013894] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30)

<7> [209.013990] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [209.014102] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B]

<7> [209.014206] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [209.014307] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [209.014403] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3

<7> [209.014527] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [209.014614] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [209.014692] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [209.014825] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:538:HDMI-A-3] Limiting target display pipe bpp to 30 (EDID bpp 36, max requested bpp 30, max platform bpp 36)

<7> [209.014931] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30)

<7> [209.015035] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [209.015138] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B]

<7> [209.015237] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [209.015337] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [209.015432] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3

<7> [209.015576] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:538:HDMI-A-3] Limiting target display pipe bpp to 30 (EDID bpp 36, max requested bpp 30, max platform bpp 36)

<7> [209.015678] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30)

<7> [209.015774] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [209.015869] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B]

<7> [209.015967] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [209.016078] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [209.016172] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3

<7> [209.016279] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [209.016366] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [209.016444] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [209.016590] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CONNECTOR:538:HDMI-A-3] Limiting target display pipe bpp to 30 (EDID bpp 36, max requested bpp 30, max platform bpp 36)

<7> [209.016692] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 10 bpc for HDMI output (pipe bpp: 30)

<7> [209.016785] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [209.016884] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B]

<7> [209.016983] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [209.017090] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [209.017188] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3

<7> [209.017292] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [209.017377] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [209.017453] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [209.017552] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989

<7> [209.017625] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59

<7> [209.017696] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989

<7> [209.017768] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59

<7> [209.017839] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [209.017916] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0

<7> [209.017990] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255

<7> [209.018073] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267

<7> [209.018164] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 594000 num active planes 1

<7> [209.018264] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000

<7> [209.018362] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000

<7> [209.018456] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248

<7> [209.018561] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz

<7> [209.018666] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated TC PLL 3

<7> [209.018762] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving TC PLL 3

<7> [209.018856] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset]

<7> [209.018956] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [209.019059] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0

<7> [209.019161] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [209.019254] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [209.019348] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [209.019441] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [209.019533] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [209.019627] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [209.019721] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [209.019724] xe 0000:03:00.0: scan mode: Underscan

<7> [209.019725] xe 0000:03:00.0: colorimetry: No Data

<7> [209.019726] xe 0000:03:00.0: picture aspect: No Data

<7> [209.019727] xe 0000:03:00.0: active aspect: Same as Picture

<7> [209.019729] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [209.019730] xe 0000:03:00.0: quantization range: Full

<7> [209.019731] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [209.019733] xe 0000:03:00.0: ycc quantization range: Full

<7> [209.019734] xe 0000:03:00.0: hdmi content type: Graphics

<7> [209.019736] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [209.019738] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [209.019740] xe 0000:03:00.0: product: Discrete gfx

<7> [209.019741] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [209.019743] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [209.019745] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 07 00 66 10 00 01 00 00 00 00 00 00 00 00

<7> [209.019837] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 05 e3 cd 0c 32 38 45 38 35 30 09 07 07 00 00 00

<7> [209.019929] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [209.020023] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [209.020128] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37

<7> [209.020222] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [209.020315] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [209.020408] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9

<7> [209.020501] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9

<7> [209.020594] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9

<7> [209.020687] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9

<7> [209.020779] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9

<7> [209.020873] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 185625, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [209.020965] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [209.021062] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [209.021155] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [209.021247] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [209.021344] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [209.021439] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [209.021533] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [209.021626] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [209.021719] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40c0

<7> [209.021811] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [209.021902] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x4a06

<7> [209.021993] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [209.022094] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [209.022188] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [209.022278] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [209.022369] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [209.022460] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0xae00

<7> [209.022551] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [209.022643] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [209.022734] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [209.022827] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [209.022918] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [209.023009] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [209.023112] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [209.023207] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [209.023298] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [209.023389] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [209.023482] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [209.023574] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [209.023664] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [209.023756] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [209.023847] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [209.023939] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [209.024034] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [209.024135] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [209.024230] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [209.024325] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no

<7> [209.024417] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no

<7> [209.024509] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no

<7> [209.024602] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no

<7> [209.024694] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no

<7> [209.025586] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [209.025731] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000)

<7> [209.025840] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F]

<7> [209.025931] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A]

<7> [209.026018] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B]

<7> [209.026121] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C]

<7> [209.026208] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D]

<7> [209.026288] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G]

<7> [209.026371] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A]

<7> [209.026452] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B]

<7> [209.026533] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C]

<7> [209.026613] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D]

<7> [209.026693] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H]

<7> [209.026774] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I]

<7> [209.026854] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A]

<7> [209.026935] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B]

<7> [209.027015] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C]

<7> [209.027106] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D]

<7> [209.042192] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [209.042495] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A)

<7> [209.058792] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x2, on? 0) for [CRTC:268:pipe B]

<7> [209.059059] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3

<7> [209.062175] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe B

<7> [209.078066] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [209.081065] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:538:HDMI-A-3][ENCODER:537:DDI TC3/PHY H] Enable audio codec on [CRTC:268:pipe B], 32 bytes ELD

<7> [209.097500] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000)

<7> [209.098003] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N

<7> [209.099009] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [209.099816] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]

<6> [209.106391] [IGT] xe_pm: finished subtest d3hot-multiple-execs, SUCCESS

<7> [209.107353] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<6> [209.108118] pcieport 0000:00:01.0: PME: Spurious native interrupt!

<7> [209.126171] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0

<6> [209.148793] Console: switching to colour frame buffer device 240x67

Results for igt@xe_pm@d3hot-multiple-execs