Results for igt@kms_force_connector_basic@force-edid

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.3-gdbe2c5702 (x86_64) (Linux: 6.19.0-lgci-xe-xe-4569-e66c64e4f12e55cad-debug+ x86_64)
Out 
Using IGT_SRANDOM=1771353721 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.026s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.026s)
Dmesg
<6> [198.763628] Console: switching to colour dummy device 80x25
<6> [198.764208] [IGT] kms_force_connector_basic: executing
<7> [198.770191] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:551:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [198.770217] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [198.770229] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [198.774647] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [198.774706] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [198.774714] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [198.779044] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [198.779083] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [198.779089] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [198.783409] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<6> [198.784050] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [198.785013] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:551:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [198.785029] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [198.785035] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [198.785482] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [198.785708] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [198.786096] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [198.786345] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [198.786368] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [198.786596] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [198.788893] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [198.788912] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [198.789140] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] status updated from disconnected to connected
<7> [198.789173] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [198.789453] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [198.789603] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] probed modes:
<7> [198.789611] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [198.789620] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [198.789627] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [198.789634] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [198.789641] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [198.789701] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [198.789709] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [198.790600] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [198.790831] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [198.791227] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [198.791506] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [198.791525] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [198.791748] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [198.794039] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [198.794057] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [198.794444] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] probed modes:
<7> [198.794452] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [198.794460] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [198.794467] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [198.794473] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [198.794479] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [198.794938] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:551:HDMI-A-1] EDID override set
<7> [198.794988] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [198.794997] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [198.795514] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:551:HDMI-A-1] ELD monitor IGT
<7> [198.795523] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:551:HDMI-A-1] ELD size 24, SAD count 0
<7> [198.795729] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [198.795957] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [198.796327] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [198.796550] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [198.796833] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [198.796854] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [198.796869] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] probed modes:
<7> [198.796875] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [198.796881] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [198.796888] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [198.796894] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [198.796900] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [198.797147] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:551:HDMI-A-1] EDID override reset
<7> [198.797350] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [198.797357] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [198.797813] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [198.798056] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [198.798477] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [198.798707] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [198.798725] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [198.798947] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [198.801332] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [198.801351] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [198.801572] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:551:HDMI-A-1] EDID changed, epoch counter 2
<7> [198.801711] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [198.801732] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [198.801747] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] probed modes:
<7> [198.801752] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [198.801759] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [198.801765] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [198.801771] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [198.801776] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [198.802101] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:551:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [198.802113] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [198.802121] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [198.806430] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] status updated from connected to disconnected
<7> [198.806448] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [198.806461] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [198.806562] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [198.806658] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [198.806666] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [198.810978] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<6> [198.811597] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [198.814083] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [198.815121] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [198.824215] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [198.824229] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [198.824378] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1]
<7> [198.824390] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:511:eDP-1]
<7> [198.825096] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [198.826151] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [198.826504] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [198.826793] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [198.827197] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [198.827217] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [198.827227] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [198.827238] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD monitor
<7> [198.827249] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD size 20, SAD count 0
<7> [198.827310] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] VRR capable: yes
<7> [198.827609] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [198.827887] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [198.828871] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1] probed modes:
<7> [198.828880] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [198.828889] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [198.828898] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:DP-1]
<7> [198.828907] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:520:DP-1]
<7> [198.829249] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:DP-1] disconnected
<7> [198.829258] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2]
<7> [198.829264] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-2]
<7> [198.829633] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected
<7> [198.829641] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]
<7> [198.829647] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]
<7> [198.829989] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected
<7> [198.829998] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [198.830007] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [198.834492] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [198.834500] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:511:eDP-1] enabled? yes
<7> [198.834507] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:520:DP-1] enabled? no
<7> [198.834512] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-2] enabled? no
<7> [198.834516] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:DP-3] enabled? no
<7> [198.834520] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:551:HDMI-A-1] enabled? no
<7> [198.834569] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [198.834596] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:511:eDP-1] found preferred mode: 1920x1200
<7> [198.834602] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config
<7> [198.834634] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 1920x1200 set (0,0)
<7> [198.841243] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [198.842047] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:511:eDP-1] force updated from 0 to 0 or reprobing
<7> [198.842059] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1]
<7> [198.842066] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:511:eDP-1]
<7> [198.842775] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [198.843363] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [198.843641] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [198.843913] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [198.844235] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [198.844247] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [198.844254] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [198.844263] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD monitor
<7> [198.844271] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD size 20, SAD count 0
<7> [198.844322] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] VRR capable: yes
<7> [198.844613] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [198.844897] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [198.845871] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1] probed modes:
<7> [198.845878] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [198.845885] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [198.845941] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1]
<7> [198.845947] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:511:eDP-1]
<7> [198.846641] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [198.847162] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [198.847480] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [198.847749] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [198.848050] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [198.848059] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [198.848066] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [198.848073] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD monitor
<7> [198.848081] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD size 20, SAD count 0
<7> [198.848106] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] VRR capable: yes
<7> [198.848403] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [198.848674] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [198.849633] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1] probed modes:
<7> [198.849640] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [198.849648] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [198.849881] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:511:eDP-1] EDID override reset
<7> [198.849925] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1]
<7> [198.849933] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:511:eDP-1]
<7> [198.850654] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [198.851216] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [198.851559] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [198.851859] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [198.852184] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [198.852194] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [198.852201] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [198.852209] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD monitor
<7> [198.852217] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD size 20, SAD count 0
<7> [198.852244] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] VRR capable: yes
<7> [198.852723] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [198.853025] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [198.854011] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1] probed modes:
<7> [198.854018] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [198.854025] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [198.854257] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:520:DP-1] EDID override reset
<7> [198.854304] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:DP-1]
<7> [198.854311] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:520:DP-1]
<7> [198.854701] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:DP-1] disconnected
<7> [198.854945] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:533:DP-2] EDID override reset
<7> [198.854979] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2]
<7> [198.854986] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-2]
<7> [198.855342] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected
<7> [198.855563] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:542:DP-3] EDID override reset
<7> [198.855600] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]
<7> [198.855606] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]
<7> [198.855941] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected
<7> [198.856312] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:551:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [198.856326] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [198.856335] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [198.859331] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [198.859771] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [198.860110] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [198.860720] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [198.860775] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [198.860783] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [198.865160] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [198.865418] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:551:HDMI-A-1] EDID override reset
<7> [198.865450] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [198.865455] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [198.869758] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [198.871510] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [198.871775] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [198.874527] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [198.874864] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [198.882978] Console: switching to colour frame buffer device 240x75
Created at 2026-02-17 18:59:03