Result:
igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0
| Detail | Value |
|---|---|
| Duration | 0.81 seconds |
| Igt-Version |
IGT-Version: 2.3-gc6cd0883b (x86_64) (Linux: 6.19.0-rc8-lgci-xe-xe-4484-a68485eec77211a46+ x86_64) |
| Out |
Using IGT_SRANDOM=1770062539 for randomisation Starting subtest: load Opened device: /dev/dri/card0 Subtest load: SUCCESS (0.805s) |
| Err |
Starting subtest: load Subtest load: SUCCESS (0.805s) |
| Dmesg |
<6> [124.403474] [IGT] xe_module_load: executing
<4> [124.403520] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030
<6> [124.407184] [IGT] xe_module_load: starting subtest load
<5> [124.745263] Setting dangerous option force_probe - tainting kernel
<6> [124.748585] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [124.750330] xe 0000:03:00.0: [drm] Running in SR-IOV PF mode
<7> [124.750369] xe 0000:03:00.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error
<6> [124.751322] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [124.751331] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE G21 e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [124.751445] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [124.751541] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [124.751644] xe 0000:03:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<6> [124.755149] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000
<6> [124.755258] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [124.755260] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<6> [124.755262] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [124.755263] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<7> [124.755384] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [124.755524] xe 0000:03:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [124.755648] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [124.755986] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [124.756093] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [124.756198] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [124.756312] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [124.756417] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [124.756521] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [124.756849] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [124.756979] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [124.757093] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [124.757205] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [124.757514] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [124.758029] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [124.772258] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [124.772373] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [124.772490] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [124.772597] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [124.772702] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [124.772811] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [124.772914] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 850)
<7> [124.773016] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [124.773110] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [124.773213] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [124.773314] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [124.773412] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [124.773509] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [124.773603] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [124.773705] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [124.773802] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [124.773893] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [124.773981] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [124.774073] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [124.774175] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [124.774272] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [124.774369] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [124.774460] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [124.774559] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [124.774654] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [124.774745] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [124.774858] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [124.774948] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [124.775038] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [124.775130] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [124.775465] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [124.775614] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [124.775950] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [124.776130] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [124.776518] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [124.776628] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [124.776938] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [124.777066] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [124.777388] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [124.777515] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [124.777830] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [124.777934] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [124.778811] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [124.780414] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [124.780769] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [124.780895] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [124.780998] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [124.781093] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 130 (130.0 usec)
<7> [124.781185] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 130 (130.0 usec)
<7> [124.781275] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [124.781362] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [124.781447] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [124.781533] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [124.781623] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [124.781711] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [124.781798] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 130 (130.0 usec)
<7> [124.781881] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 130 (130.0 usec)
<7> [124.781962] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [124.782044] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [124.782125] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [124.782204] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [124.782533] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [124.782691] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [124.782821] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [124.782971] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [124.783127] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [124.783290] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [124.783446] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [124.783595] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [124.783757] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [124.783923] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [124.784073] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [124.784210] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [124.784348] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [124.784494] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [124.784651] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [124.784770] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [124.784931] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [124.785070] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [124.785218] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [124.785359] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [124.785508] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [124.785647] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [124.785801] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [124.785953] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [124.786087] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [124.786235] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [124.786379] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [124.786511] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [124.786645] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [124.786801] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<7> [124.794640] xe 0000:03:00.0: [drm:intel_crtc_init [xe]] 4 display pipes available.
<6> [124.797342] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [124.802508] xe 0000:03:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [124.802657] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [124.802781] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [124.803144] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:506:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [124.803328] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:506:DDI TC1/PHY F]
<7> [124.804161] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:506:DDI TC1/PHY F]
<7> [124.804352] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:506:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [124.806274] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:525:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [124.806500] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:525:DDI TC2/PHY G]
<7> [124.807015] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:525:DDI TC2/PHY G]
<7> [124.807197] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:525:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [124.807702] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:537:DDI TC3/PHY H]
<7> [124.807850] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:537:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [124.808257] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:541:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [124.808401] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:541:DDI TC4/PHY I]
<7> [124.808712] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:541:DDI TC4/PHY I]
<7> [124.808837] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:541:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [124.809580] xe 0000:03:00.0: [drm:intel_vga_disable [xe]] VGA plane is disabled
<7> [124.809808] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:150:pipe A] hw state readout: disabled
<7> [124.810183] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled
<7> [124.810354] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:386:pipe C] hw state readout: disabled
<7> [124.810732] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:504:pipe D] hw state readout: disabled
<7> [124.810866] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A
<7> [124.811177] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:64:plane 2A] hw state readout: disabled, pipe A
<7> [124.811280] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 3A] hw state readout: disabled, pipe A
<7> [124.811376] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:124:plane 4A] hw state readout: disabled, pipe A
<7> [124.811668] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:134:plane 5A] hw state readout: disabled, pipe A
<7> [124.811758] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:144:cursor A] hw state readout: disabled, pipe A
<7> [124.811857] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B
<7> [124.812146] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B
<7> [124.812242] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B
<7> [124.812333] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B
<7> [124.812626] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B
<7> [124.812712] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B
<7> [124.812803] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:270:plane 1C] hw state readout: disabled, pipe C
<7> [124.813093] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:300:plane 2C] hw state readout: disabled, pipe C
<7> [124.813184] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:330:plane 3C] hw state readout: disabled, pipe C
<7> [124.813277] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:360:plane 4C] hw state readout: disabled, pipe C
<7> [124.813571] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:370:plane 5C] hw state readout: disabled, pipe C
<7> [124.813661] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:380:cursor C] hw state readout: disabled, pipe C
<7> [124.813756] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:388:plane 1D] hw state readout: disabled, pipe D
<7> [124.814063] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:418:plane 2D] hw state readout: disabled, pipe D
<7> [124.814152] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:448:plane 3D] hw state readout: disabled, pipe D
<7> [124.814238] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:478:plane 4D] hw state readout: disabled, pipe D
<7> [124.814528] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:488:plane 5D] hw state readout: disabled, pipe D
<7> [124.814613] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:498:cursor D] hw state readout: disabled, pipe D
<7> [124.814699] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:506:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [124.814781] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:508:DP-MST A] hw state readout: disabled, pipe A
<7> [124.814878] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DP-MST B] hw state readout: disabled, pipe B
<7> [124.814968] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:510:DP-MST C] hw state readout: disabled, pipe C
<7> [124.815056] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:511:DP-MST D] hw state readout: disabled, pipe D
<7> [124.815351] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:525:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [124.815438] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:527:DP-MST A] hw state readout: disabled, pipe A
<7> [124.815523] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST B] hw state readout: disabled, pipe B
<7> [124.815607] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:529:DP-MST C] hw state readout: disabled, pipe C
<7> [124.815690] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:530:DP-MST D] hw state readout: disabled, pipe D
<7> [124.816086] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:537:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [124.816499] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:541:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [124.816598] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:543:DP-MST A] hw state readout: disabled, pipe A
<7> [124.816739] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DP-MST B] hw state readout: disabled, pipe B
<7> [124.816878] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:545:DP-MST C] hw state readout: disabled, pipe C
<7> [124.817004] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:546:DP-MST D] hw state readout: disabled, pipe D
<7> [124.817096] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0
<7> [124.817213] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [124.817321] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1
<7> [124.817627] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [124.817725] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0
<7> [124.817836] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0
<7> [124.818139] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0
<7> [124.818246] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:507:DP-1] hw state readout: disabled
<7> [124.818360] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:520:HDMI-A-1] hw state readout: disabled
<7> [124.818670] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:526:DP-2] hw state readout: disabled
<7> [124.818771] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:534:HDMI-A-2] hw state readout: disabled
<7> [124.818890] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:538:HDMI-A-3] hw state readout: disabled
<7> [124.819204] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:542:DP-3] hw state readout: disabled
<7> [124.819299] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:550:HDMI-A-4] hw state readout: disabled
<7> [124.819391] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:34:plane 1A] min_cdclk 0 kHz
<7> [124.819488] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:64:plane 2A] min_cdclk 0 kHz
<7> [124.819580] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 3A] min_cdclk 0 kHz
<7> [124.819675] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:124:plane 4A] min_cdclk 0 kHz
<7> [124.819765] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:134:plane 5A] min_cdclk 0 kHz
<7> [124.819864] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:144:cursor A] min_cdclk 0 kHz
<7> [124.819950] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:150:pipe A] min_cdclk 0 kHz
<7> [124.820036] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz
<7> [124.820119] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz
<7> [124.820205] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz
<7> [124.820294] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz
<7> [124.820381] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz
<7> [124.820467] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz
<7> [124.820558] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz
<7> [124.820652] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:270:plane 1C] min_cdclk 0 kHz
<7> [124.820737] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:300:plane 2C] min_cdclk 0 kHz
<7> [124.820830] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:330:plane 3C] min_cdclk 0 kHz
<7> [124.820919] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:360:plane 4C] min_cdclk 0 kHz
<7> [124.821006] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:370:plane 5C] min_cdclk 0 kHz
<7> [124.821096] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:380:cursor C] min_cdclk 0 kHz
<7> [124.821182] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:386:pipe C] min_cdclk 0 kHz
<7> [124.821266] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:388:plane 1D] min_cdclk 0 kHz
<7> [124.821348] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:418:plane 2D] min_cdclk 0 kHz
<7> [124.821434] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:448:plane 3D] min_cdclk 0 kHz
<7> [124.821523] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:478:plane 4D] min_cdclk 0 kHz
<7> [124.821609] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:488:plane 5D] min_cdclk 0 kHz
<7> [124.821693] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:498:cursor D] min_cdclk 0 kHz
<7> [124.821775] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:504:pipe D] min_cdclk 0 kHz
<7> [124.822074] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:150:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [124.822180] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [124.822278] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:386:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [124.822370] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:504:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [124.822460] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [124.822585] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [124.822700] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [124.822816] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [124.823144] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [124.823330] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: no [setup_hw_state]
<7> [124.823446] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state]
<7> [124.823553] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:386:pipe C] enable: no [setup_hw_state]
<7> [124.823656] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:504:pipe D] enable: no [setup_hw_state]
<7> [124.823761] xe 0000:03:00.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling
<6> [124.828640] xe 0000:03:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.55.3
<7> [124.831929] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0065f3f7
<7> [124.832031] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [124.832119] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [124.832203] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [124.832282] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ee8
<7> [124.832360] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [124.832436] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [124.832514] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [124.832593] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [124.832671] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [124.832746] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [124.832834] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [124.832909] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [124.832984] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [124.833059] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [124.833179] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [124.843804] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [124.844576] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [124.844821] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000fffff
<7> [124.844915] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000fffff
<7> [124.845000] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [124.845084] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [124.845166] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [124.931597] xe 0000:03:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [124.931600] xe 0000:03:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [124.931769] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [124.931911] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [124.932033] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [124.932135] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [124.932255] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [124.932373] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [124.932499] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [124.932582] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [124.932671] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [124.932754] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [124.932907] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [124.932995] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [124.933078] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [124.933156] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [124.934555] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [124.934658] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [124.934751] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [124.934857] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440
<7> [124.934953] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [124.935048] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [124.935142] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [124.935226] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [124.935312] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [124.935395] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [124.935477] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [124.935556] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [124.935636] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [124.935717] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [124.935800] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [124.935885] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [124.935964] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [124.936040] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [124.936118] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [124.936194] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [124.936270] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [124.936344] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [124.936416] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [124.936492] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [124.936569] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [124.936644] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [124.936733] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [124.936828] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [124.936923] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [124.937015] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc
<7> [124.937101] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01
<7> [124.937185] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c
<7> [124.937275] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [124.937367] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [124.937454] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [124.937537] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [124.937621] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [124.937704] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [124.937796] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [124.937891] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [124.937981] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [124.938060] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [124.938377] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [124.938464] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [124.938548] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [124.938634] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [124.938963] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [124.939052] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [124.939135] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [124.939217] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [124.939528] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [124.939614] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [124.939697] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [124.939778] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [124.939875] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [124.939959] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [124.940045] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [124.940371] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [124.940459] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [124.940547] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [124.940628] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [124.940710] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [124.940794] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [124.940879] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [124.941437] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [124.945901] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0107f3f7
<7> [124.945996] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [124.946078] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [124.946155] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [124.946228] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00002328
<7> [124.946299] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [124.946368] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [124.946437] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [124.946505] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [124.946572] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [124.946639] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [124.946706] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [124.946772] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [124.946855] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [124.946951] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [124.947123] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [124.949188] xe 0000:03:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0x627000 for xe_guc_buf_cache_init_with_size [xe]
<7> [124.951067] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [124.952083] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [124.973511] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)
<7> [124.984207] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [124.984539] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [124.985354] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords
<7> [124.985499] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [124.985590] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140
<7> [124.985673] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [124.985758] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [124.985857] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [124.985940] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [124.986025] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [124.986114] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000
<7> [124.989051] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [124.989164] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [124.989261] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [124.991569] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [124.991681] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [124.995010] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [124.996290] xe 0000:03:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.55.3
<7> [124.998528] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x01a183f7
<7> [124.998624] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [124.998710] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [124.998799] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [124.998878] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x0000365a
<7> [124.998954] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [124.999030] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [124.999105] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [124.999180] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [124.999254] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [124.999332] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [124.999408] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [124.999484] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [124.999558] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [125.000879] xe 0000:03:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [125.001327] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [125.001455] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [125.012850] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [125.013190] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [125.013298] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,0000ff00
<7> [125.013386] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,0000ff00
<7> [125.013467] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [125.013547] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [125.013624] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [125.013704] xe 0000:03:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [125.013705] xe 0000:03:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [125.013707] xe 0000:03:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [125.013708] xe 0000:03:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [125.013708] xe 0000:03:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [125.013709] xe 0000:03:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [125.013710] xe 0000:03:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [125.013712] xe 0000:03:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [125.013715] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [125.013923] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [125.014031] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [125.014135] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [125.014229] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [125.014321] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [125.014407] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [125.014494] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [125.014580] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [125.014667] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [125.014757] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [125.014952] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [125.015035] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [125.015122] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [125.015204] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [125.015294] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [125.015380] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [125.015466] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [125.015551] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [125.015632] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [125.015713] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [125.015924] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [125.016014] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [125.016104] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [125.016190] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [125.016278] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [125.016364] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [125.016451] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [125.016537] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [125.016618] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [125.016704] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [125.016885] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [125.016972] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [125.017058] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [125.017142] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [125.017227] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [125.017307] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [125.017387] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [125.017474] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [125.017559] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [125.017644] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [125.019152] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [125.019249] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [125.019343] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xc50c] = 0x00010002
<7> [125.019434] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [125.019516] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [125.019600] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [125.019680] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [125.019763] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [125.019865] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [125.019954] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [125.020042] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [125.020126] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [125.020206] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [125.020287] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [125.020369] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [125.020448] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [125.020525] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [125.020601] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [125.020677] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [125.020752] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [125.020839] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [125.020916] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [125.020991] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [125.021067] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [125.021147] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [125.021226] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [125.021319] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [125.021409] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [125.021496] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c
<7> [125.021579] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1
<7> [125.021662] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0
<7> [125.021745] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c
<7> [125.021842] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1
<7> [125.021926] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0
<7> [125.022008] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c
<7> [125.022089] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1
<7> [125.022173] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0
<7> [125.022393] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [125.022475] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [125.022554] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [125.022637] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d0] = 0x1039319c
<7> [125.022717] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d4] = 0x103931a1
<7> [125.022806] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d8] = 0x003931d0
<7> [125.022893] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04dc] = 0x1039419c
<7> [125.022976] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e0] = 0x103941a1
<7> [125.023057] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e4] = 0x003941d0
<7> [125.023136] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e8] = 0x1039499c
<7> [125.023214] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04ec] = 0x103949a1
<7> [125.023293] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04f0] = 0x003949d0
<7> [125.023493] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [125.023579] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [125.023658] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [125.023738] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c
<7> [125.023829] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1
<7> [125.023910] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0
<7> [125.023989] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c
<7> [125.024067] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1
<7> [125.024147] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0
<7> [125.024223] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c
<7> [125.024303] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1
<7> [125.024385] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0
<7> [125.024598] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [125.024685] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [125.024770] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [125.024866] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d0] = 0x1039319c
<7> [125.024949] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d4] = 0x103931a1
<7> [125.025028] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d8] = 0x003931d0
<7> [125.025108] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84dc] = 0x1039419c
<7> [125.025184] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e0] = 0x103941a1
<7> [125.025262] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e4] = 0x003941d0
<7> [125.025344] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e8] = 0x1039499c
<7> [125.025423] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84ec] = 0x103949a1
<7> [125.025501] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84f0] = 0x003949d0
<7> [125.025930] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [125.028721] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x024403f7
<7> [125.028821] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [125.028906] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [125.028988] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [125.029067] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004aaa
<7> [125.029144] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [125.029218] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [125.029293] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [125.029367] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [125.029442] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [125.029516] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [125.029591] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [125.029666] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [125.029739] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [125.029846] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [125.029955] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [125.031309] xe 0000:03:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x1a18000 for xe_guc_buf_cache_init_with_size [xe]
<7> [125.050545] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056)
<7> [125.061170] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 10ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [125.061476] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [125.062074] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [125.062175] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [125.063639] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [125.063744] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [125.075789] xe 0000:03:00.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC
<7> [125.076111] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [125.076237] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [125.076350] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [125.076455] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [125.077715] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [125.077837] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [125.078264] xe 0000:03:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [125.078317] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [125.078419] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [125.078510] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [125.078595] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [125.079133] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 0: start 0x90008
<7> [125.079257] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 1: start 0x90108
<7> [125.079368] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 2: start 0x90208
<7> [125.079469] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 3: start 0x90308
<7> [125.079569] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 4: start 0x903c8
<7> [125.079668] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008
<7> [125.079762] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108
<7> [125.079862] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208
<7> [125.079959] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308
<7> [125.080050] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8
<7> [125.080139] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 0: start 0x52008
<7> [125.080228] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 1: start 0x52108
<7> [125.080316] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 2: start 0x52208
<7> [125.080405] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 3: start 0x52308
<7> [125.080499] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 4: start 0x523c8
<7> [125.080599] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 0: start 0x59008
<7> [125.080697] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 1: start 0x59108
<7> [125.080809] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 2: start 0x59208
<7> [125.080906] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 3: start 0x59308
<7> [125.080999] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 4: start 0x593c8
<7> [125.081355] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no
<7> [125.081489] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [125.081615] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [125.081738] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [125.081895] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: no [fastset]
<7> [125.082014] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset]
<7> [125.082136] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:386:pipe C] enable: no [fastset]
<7> [125.082248] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:504:pipe D] enable: no [fastset]
<7> [125.083026] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff30f2 0x28d32a71)
<7> [125.083536] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [125.083848] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A]
<7> [125.084155] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]
<7> [125.084325] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:386:pipe C]
<7> [125.084538] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:504:pipe D]
<7> [125.084812] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03010 0x28d00071)
<7> [125.085051] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<5> [125.086021] Creating 4 MTD partitions on "xe.nvm.768":
<5> [125.086051] 0x000000000000-0x000000001000 : "xe.nvm.768.DESCRIPTOR"
<7> [125.087850] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:507:DP-1] adding connector to sysfs
<7> [125.088961] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1
<7> [125.090511] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:507:DP-1] generating connector hotplug event
<7> [125.090581] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:520:HDMI-A-1] adding connector to sysfs
<7> [125.090925] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:520:HDMI-A-1] generating connector hotplug event
<7> [125.090974] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:526:DP-2] adding connector to sysfs
<5> [125.091119] 0x000000001000-0x00000054e000 : "xe.nvm.768.GSC"
<7> [125.091396] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2
<7> [125.092165] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:526:DP-2] generating connector hotplug event
<7> [125.092207] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:534:HDMI-A-2] adding connector to sysfs
<7> [125.092504] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:534:HDMI-A-2] generating connector hotplug event
<7> [125.092542] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:538:HDMI-A-3] adding connector to sysfs
<7> [125.092810] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:538:HDMI-A-3] generating connector hotplug event
<7> [125.092852] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:542:DP-3] adding connector to sysfs
<7> [125.093393] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3
<7> [125.094477] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:542:DP-3] generating connector hotplug event
<7> [125.094525] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:550:HDMI-A-4] adding connector to sysfs
<7> [125.094941] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:550:HDMI-A-4] generating connector hotplug event
<5> [125.096156] 0x00000054e000-0x00000074e000 : "xe.nvm.768.OptionROM"
<6> [125.099151] mei_lb xe.mei-gscfi.768-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:03:00.0 (ops xe_late_bind_component_ops [xe])
<7> [125.099657] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<5> [125.100779] 0x00000074e000-0x00000075e000 : "xe.nvm.768.DAM"
<6> [125.102844] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0
<7> [125.102953] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [125.103098] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<7> [125.104609] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]
<7> [125.105053] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:150:pipe A] not active, skipping
<7> [125.105170] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping
<7> [125.105274] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:386:pipe C] not active, skipping
<7> [125.105389] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [125.105374] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:504:pipe D] not active, skipping
<7> [125.105492] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [125.106015] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [125.108962] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:507:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [125.109199] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]
<7> [125.113434] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:520:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [125.113574] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]
<7> [125.117796] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:526:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [125.117975] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]
<7> [125.122216] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:534:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [125.122344] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]
<7> [125.126535] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:538:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [125.126646] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]
<7> [125.130820] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:542:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [125.130936] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]
<7> [125.135152] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:550:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [125.135489] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [125.135863] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-1]
<7> [125.135873] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]
<7> [125.140139] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-1] disconnected
<7> [125.140176] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-1]
<7> [125.140180] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]
<7> [125.144414] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-1] disconnected
<7> [125.144420] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2]
<7> [125.144424] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]
<7> [125.148676] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2] disconnected
<7> [125.148682] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-2]
<7> [125.148686] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]
<7> [125.153006] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-2] disconnected
<7> [125.153012] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-3]
<7> [125.153016] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]
<7> [125.157149] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-3] disconnected
<7> [125.157154] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]
<7> [125.157158] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]
<7> [125.161374] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected
<7> [125.161379] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-4]
<7> [125.161382] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]
<7> [125.165501] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-4] disconnected
<7> [125.165506] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [125.165515] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:DP-1] enabled? no
<7> [125.165518] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:520:HDMI-A-1] enabled? no
<7> [125.165521] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-2] enabled? no
<7> [125.165524] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:HDMI-A-2] enabled? no
<7> [125.165526] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:538:HDMI-A-3] enabled? no
<7> [125.165529] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:DP-3] enabled? no
<7> [125.165531] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:550:HDMI-A-4] enabled? no
<7> [125.165662] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [125.165678] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [125.165733] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [125.165758] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<6> [125.165899] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [125.166671] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7> [125.167469] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [125.167608] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [125.167725] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [125.167847] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [125.167949] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [125.168049] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [125.168154] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [125.168255] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [125.168354] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [125.168452] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [125.168549] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [125.168644] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [125.168740] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [125.168846] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [125.168940] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [125.169035] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [125.169127] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [125.169219] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [125.169321] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [125.169420] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [125.169517] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [125.169612] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [125.170048] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [125.170600] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-1]
<7> [125.170608] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]
<3> [125.171625] snd_hda_intel 0000:04:00.0: Unknown capability 0
<7> [125.171650] azx_first_init: snd_hda_intel 0000:04:00.0: chipset global capabilities = 0x4101
<7> [125.172006] azx_init_pci: snd_hda_intel 0000:04:00.0: Clearing TCSEL
<7> [125.172072] azx_init_pci: snd_hda_intel 0000:04:00.0: SCH snoop: Enabled
<7> [125.174793] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-1] disconnected
<7> [125.174800] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-1]
<7> [125.174804] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]
<7> [125.178986] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-1] disconnected
<7> [125.178992] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2]
<7> [125.178995] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]
<7> [125.183141] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2] disconnected
<7> [125.183145] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-2]
<7> [125.183149] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]
<7> [125.183802] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [125.187295] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-2] disconnected
<7> [125.187300] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-3]
<7> [125.187304] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]
<6> [125.187556] xe 0000:03:00.0: [drm] Using mailbox commands for power limits
<7> [125.188019] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] thermal info read val 0x3c78647d val1 0x69
<7> [125.188231] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] thermal config count 0x9
<7> [125.188364] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [125.188824] xe 0000:03:00.0: [drm] PL2 is supported on channel 0
<7> [125.189006] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [125.189769] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [125.189965] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [125.190955] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [125.191240] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [125.191658] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [125.191812] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [125.191955] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-3] disconnected
<7> [125.191964] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]
<7> [125.191969] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]
<7> [125.196104] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected
<7> [125.196114] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-4]
<7> [125.196118] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]
<6> [125.199880] xe 0000:03:00.0: [drm] Pre-production hardware detected.
<7> [125.199944] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [125.200399] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-4] disconnected
<7> [125.200410] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [125.200423] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:DP-1] enabled? no
<7> [125.200428] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:520:HDMI-A-1] enabled? no
<7> [125.200432] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-2] enabled? no
<7> [125.200437] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:HDMI-A-2] enabled? no
<7> [125.200441] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:538:HDMI-A-3] enabled? no
<7> [125.200445] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:DP-3] enabled? no
<7> [125.200449] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:550:HDMI-A-4] enabled? no
<7> [125.200613] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [125.200632] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [125.200692] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [125.200706] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [125.200738] xe 0000:03:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [125.212750] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [125.212829] [IGT] xe_module_load: finished subtest load, SUCCESS
<6> [125.213020] [IGT] xe_module_load: exiting, ret=0
|