<5>[ 0.000000] Linux version 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Tue Jan 20 00:59:17 UTC 2026 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x69916018 ESRT=0x68ff8518 MOKvar=0x6ccfb000 <6>[ 0.000000] efi: Remove mem259: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem261: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.8 present. <6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D99.2508051732 08/05/2025 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3100.000 MHz processor <6>[ 0.000000] tsc: Detected 3110.400 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000017] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs <6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000381] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000382] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.004895] esrt: Reserving ESRT space from 0x0000000068ff8518 to 0x0000000068ff8668. <7>[ 0.004903] e820: update [mem 0x68ff8000-0x68ff8fff] usable ==> reserved <6>[ 0.004920] Using GB pages for direct mapping <6>[ 0.005531] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005532] printk: early log buf free: 258784(98%) <6>[ 0.005533] Secure boot disabled <6>[ 0.005534] ACPI: Early table checksum verification disabled <6>[ 0.005537] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.005540] ACPI: XSDT 0x000000006FF70228 000194 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005544] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013) <6>[ 0.005547] ACPI: DSDT 0x000000006FFB6000 02555F (v02 INTEL LNL 00000002 01000013) <6>[ 0.005548] ACPI: FACS 0x000000006FEF1000 000040 <6>[ 0.005549] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005551] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005553] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005554] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005555] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005556] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005558] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005559] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005560] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005562] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005563] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000) <6>[ 0.005564] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005566] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005567] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930) <6>[ 0.005568] ACPI: SSDT 0x000000006FFDD000 009176 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005570] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005571] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930) <6>[ 0.005572] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005574] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005575] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005576] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005578] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013) <6>[ 0.005579] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013) <6>[ 0.005580] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930) <6>[ 0.005581] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005583] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930) <6>[ 0.005584] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930) <6>[ 0.005585] ACPI: LPIT 0x000000006FF85000 0000CC (v01 INTEL LNL 00000002 01000013) <6>[ 0.005587] ACPI: SSDT 0x000000006FF84000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005588] ACPI: SSDT 0x000000006FF83000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005590] ACPI: DBGP 0x000000006FF82000 000034 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005591] ACPI: DBG2 0x000000006FF81000 000054 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005592] ACPI: NHLT 0x000000006FF80000 0002E3 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005594] ACPI: SSDT 0x000000006FF7E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005595] ACPI: SSDT 0x000000006FF77000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005596] ACPI: ECDT 0x000000006FF76000 000069 (v01 LNL 00000002 01000013) <6>[ 0.005598] ACPI: DMAR 0x000000006FF75000 0000D8 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005599] ACPI: FPDT 0x000000006FF74000 000044 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005600] ACPI: SSDT 0x000000006FF73000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930) <6>[ 0.005601] ACPI: SSDT 0x000000006FF71000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005603] ACPI: SSDT 0x000000006FF6D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005604] ACPI: SDEV 0x000000006FFA8000 000046 (v01 00000000 00000000) <6>[ 0.005606] ACPI: SSDT 0x000000006FF62000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930) <6>[ 0.005607] ACPI: PHAT 0x000000006FF61000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D) <6>[ 0.005608] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005609] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113] <6>[ 0.005610] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb55e] <6>[ 0.005611] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f] <6>[ 0.005611] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387] <6>[ 0.005611] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9] <6>[ 0.005611] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa] <6>[ 0.005612] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.005612] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.005612] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.005613] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.005613] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.005613] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.005614] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6] <6>[ 0.005614] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f] <6>[ 0.005614] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1] <6>[ 0.005615] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f] <6>[ 0.005615] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4] <6>[ 0.005615] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6175] <6>[ 0.005615] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df] <6>[ 0.005616] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2] <6>[ 0.005616] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e] <6>[ 0.005616] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955] <6>[ 0.005617] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037] <6>[ 0.005617] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027] <6>[ 0.005617] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7] <6>[ 0.005617] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b] <6>[ 0.005618] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2] <6>[ 0.005618] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320] <6>[ 0.005618] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469] <6>[ 0.005619] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815] <6>[ 0.005619] ACPI: Reserving LPIT table memory at [mem 0x6ff85000-0x6ff850cb] <6>[ 0.005619] ACPI: Reserving SSDT table memory at [mem 0x6ff84000-0x6ff84d5b] <6>[ 0.005620] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff831ef] <6>[ 0.005620] ACPI: Reserving DBGP table memory at [mem 0x6ff82000-0x6ff82033] <6>[ 0.005620] ACPI: Reserving DBG2 table memory at [mem 0x6ff81000-0x6ff81053] <6>[ 0.005621] ACPI: Reserving NHLT table memory at [mem 0x6ff80000-0x6ff802e2] <6>[ 0.005621] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff7f15b] <6>[ 0.005621] ACPI: Reserving SSDT table memory at [mem 0x6ff77000-0x6ff7d53a] <6>[ 0.005621] ACPI: Reserving ECDT table memory at [mem 0x6ff76000-0x6ff76068] <6>[ 0.005622] ACPI: Reserving DMAR table memory at [mem 0x6ff75000-0x6ff750d7] <6>[ 0.005622] ACPI: Reserving FPDT table memory at [mem 0x6ff74000-0x6ff74043] <6>[ 0.005622] ACPI: Reserving SSDT table memory at [mem 0x6ff73000-0x6ff7386c] <6>[ 0.005623] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff723da] <6>[ 0.005623] ACPI: Reserving SSDT table memory at [mem 0x6ff6d000-0x6ff6f462] <6>[ 0.005623] ACPI: Reserving SDEV table memory at [mem 0x6ffa8000-0x6ffa8045] <6>[ 0.005624] ACPI: Reserving SSDT table memory at [mem 0x6ff62000-0x6ff6c4f9] <6>[ 0.005624] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff617bf] <6>[ 0.005624] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037] <6>[ 0.005694] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.005894] No NUMA configuration found <6>[ 0.005894] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff] <6>[ 0.005899] NODE_DATA(0) allocated [mem 0x87f352e40-0x87f37dfff] <6>[ 0.006014] Zone ranges: <6>[ 0.006014] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006015] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006016] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.006017] Device empty <6>[ 0.006017] Movable zone start for each node <6>[ 0.006018] Early memory node ranges <6>[ 0.006018] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006019] node 0: [mem 0x0000000000100000-0x000000006cac0fff] <6>[ 0.006019] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.006020] node 0: [mem 0x0000000104500000-0x000000087f7fffff] <6>[ 0.006021] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.006026] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006040] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.007635] On node 0, zone DMA32: 13630 pages in unavailable ranges <6>[ 0.035594] On node 0, zone Normal: 17664 pages in unavailable ranges <6>[ 0.035601] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.036084] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.036091] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.036142] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.036144] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.036145] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.036148] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.036148] ACPI: HPET id: 0x8086a701 base: 0xfed00000 <7>[ 0.036159] e820: update [mem 0x6992d000-0x69947fff] usable ==> reserved <6>[ 0.036166] TSC deadline timer available <6>[ 0.036167] CPU topo: Max. logical packages: 1 <6>[ 0.036168] CPU topo: Max. logical dies: 1 <6>[ 0.036168] CPU topo: Max. dies per package: 1 <6>[ 0.036169] CPU topo: Max. threads per core: 1 <6>[ 0.036170] CPU topo: Num. cores per package: 8 <6>[ 0.036170] CPU topo: Num. threads per package: 8 <6>[ 0.036171] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs <6>[ 0.036183] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.036184] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.036185] PM: hibernation: Registered nosave memory: [mem 0x68ff8000-0x68ff8fff] <6>[ 0.036186] PM: hibernation: Registered nosave memory: [mem 0x6992d000-0x69947fff] <6>[ 0.036187] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fffefff] <6>[ 0.036188] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x1044fffff] <6>[ 0.036189] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.036190] Booting paravirtualized kernel on bare hardware <6>[ 0.036192] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.036201] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 <6>[ 0.036534] percpu: Embedded 87 pages/cpu s233472 r8192 d114688 u524288 <7>[ 0.036538] pcpu-alloc: s233472 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.036540] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 <5>[ 0.036553] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.036658] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.036675] random: crng init done <6>[ 0.038510] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.039419] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.039480] software IO TLB: area num 8. <6>[ 0.046834] Fallback order for Node 0: 0 <6>[ 0.046837] Built 1 zonelists, mobility grouping on. Total pages: 8289632 <6>[ 0.046838] Policy zone: Normal <6>[ 0.046848] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.046849] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.046852] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.047783] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.079634] ********************************************************** <4>[ 0.079635] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.079636] ** ** <4>[ 0.079636] ** This system shows unhashed kernel memory addresses ** <4>[ 0.079636] ** via the console, logs, and other interfaces. This ** <4>[ 0.079636] ** might reduce the security of your system. ** <4>[ 0.079636] ** ** <4>[ 0.079637] ** If you see this message and you are not debugging ** <4>[ 0.079637] ** the kernel, report this immediately to your system ** <4>[ 0.079637] ** administrator! ** <4>[ 0.079637] ** ** <4>[ 0.079637] ** Use hash_pointers=always to force this mode off ** <4>[ 0.079637] ** ** <4>[ 0.079638] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.079638] ********************************************************** <6>[ 0.080758] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 0.089096] ftrace: allocating 61070 entries in 240 pages <6>[ 0.089098] ftrace: allocated 240 pages with 4 groups <6>[ 0.090511] Dynamic Preempt: voluntary <6>[ 0.090996] Running RCU self tests <6>[ 0.090996] Running RCU synchronous self tests <6>[ 0.090997] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.090997] rcu: RCU lockdep checking is enabled. <6>[ 0.090997] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. <6>[ 0.090998] Trampoline variant of Tasks RCU enabled. <6>[ 0.090998] Rude variant of Tasks RCU enabled. <6>[ 0.090998] Tracing variant of Tasks RCU enabled. <6>[ 0.090999] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.090999] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 <6>[ 0.091063] Running RCU synchronous self tests <6>[ 0.091068] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.091071] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.091073] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.101678] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 <6>[ 0.102143] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.102552] Console: colour dummy device 80x25 <6>[ 0.102560] printk: legacy console [tty0] enabled <6>[ 0.103694] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.103702] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.103705] ... MAX_LOCK_DEPTH: 48 <6>[ 0.103709] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.103712] ... CLASSHASH_SIZE: 4096 <6>[ 0.103716] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.103720] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.103723] ... CHAINHASH_SIZE: 262144 <6>[ 0.103727] memory used by lock dependency info: 54145 kB <6>[ 0.103731] memory used for stack traces: 4224 kB <6>[ 0.103735] per task-struct memory footprint: 1920 bytes <6>[ 0.103783] ACPI: Core revision 20250807 <6>[ 0.104674] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.104738] APIC: Switch to symmetric I/O mode setup <6>[ 0.104743] DMAR: Host address width 38 <6>[ 0.104747] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.104779] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.104813] DMAR: DRHD base: 0x000000fc810000 flags: 0x0 <6>[ 0.104833] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.104857] DMAR: DRHD base: 0x000000fc820000 flags: 0x1 <6>[ 0.104880] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda <6>[ 0.104914] DMAR: SATC flags: 0x1 <6>[ 0.104922] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2 <6>[ 0.104927] DMAR-IR: HPET id 0 under DRHD base 0xfc820000 <6>[ 0.104931] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.106971] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.112196] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 0.112214] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400) <6>[ 0.112292] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.112299] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.112480] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.112484] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.112494] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.112506] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.112513] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.112518] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.112523] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.112532] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.112549] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.112556] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.112562] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.112567] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.112574] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.112580] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.112587] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.112592] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.112597] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.112602] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.112607] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.113209] Freeing SMP alternatives memory: 56K <6>[ 0.113209] pid_max: default: 32768 minimum: 301 <6>[ 0.113209] landlock: Up and running. <6>[ 0.113209] Yama: becoming mindful. <6>[ 0.113209] AppArmor: AppArmor initialized <6>[ 0.113209] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.113209] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.113209] Running RCU synchronous self tests <6>[ 0.113209] Running RCU synchronous self tests <6>[ 0.113209] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1) <6>[ 0.113209] Performance Events: XSAVE Architectural LBR, PEBS fmt6+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.113209] core: cpu_core PMU driver: <6>[ 0.113209] ... version: 6 <6>[ 0.113209] ... bit width: 48 <6>[ 0.113209] ... generic counters: 10 <6>[ 0.113209] ... generic bitmap: 00000000000003ff <6>[ 0.113214] ... fixed-purpose counters: 4 <6>[ 0.113218] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.113222] ... value mask: 0000ffffffffffff <6>[ 0.113226] ... max period: 00007fffffffffff <6>[ 0.113231] ... global_ctrl mask: 0001000f000003ff <6>[ 0.113303] signal: max sigframe size: 3632 <6>[ 0.113328] Estimated ratio of average max frequency by base frequency (times 1024): 1189 <6>[ 0.113422] rcu: Hierarchical SRCU implementation. <6>[ 0.113426] rcu: Max phase no-delay instances is 400. <6>[ 0.113584] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.115436] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.115697] smp: Bringing up secondary CPUs ... <6>[ 0.116043] smpboot: x86: Booting SMP configuration: <6>[ 0.116050] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 <6>[ 0.010882] core: The event 0x5d0 is not supported as an auto-counter reload event. <6>[ 0.010882] core: cpu_atom PMU driver: <6>[ 0.010882] ... version: 6 <6>[ 0.010882] ... bit width: 48 <6>[ 0.010882] ... generic counters: 8 <6>[ 0.010882] ... generic bitmap: 00000000000000ff <6>[ 0.010882] ... fixed-purpose counters: 6 <6>[ 0.010882] ... fixed-purpose bitmap: 0000000000000077 <6>[ 0.010882] ... value mask: 0000ffffffffffff <6>[ 0.010882] ... max period: 00007fffffffffff <6>[ 0.010882] ... global_ctrl mask: 00000077000000ff <6>[ 0.126344] smp: Brought up 1 node, 8 CPUs <6>[ 0.126863] smpboot: Total of 8 processors activated (49766.40 BogoMIPS) <6>[ 0.128426] Memory: 32357764K/33158528K available (25570K kernel code, 5608K rwdata, 9672K rodata, 5724K init, 68176K bss, 777220K reserved, 0K cma-reserved) <6>[ 0.128835] devtmpfs: initialized <6>[ 0.129465] x86/mm: Memory block size: 128MB <6>[ 0.150381] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes) <6>[ 0.151226] Running RCU synchronous self tests <6>[ 0.151238] Running RCU synchronous self tests <6>[ 0.152239] Running RCU Tasks wait API self tests <6>[ 0.152471] Running RCU Tasks Rude wait API self tests <6>[ 0.152471] Running RCU Tasks Trace wait API self tests <6>[ 0.165271] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.165536] posixtimers hash table entries: 4096 (order: 7, 294912 bytes, linear) <6>[ 0.165614] futex hash table entries: 2048 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear). <6>[ 0.167022] PM: RTC time: 03:26:21, date: 2026-01-20 <6>[ 0.167761] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.168767] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.169072] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.169360] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.169414] audit: initializing netlink subsys (disabled) <5>[ 0.169492] audit: type=2000 audit(1768879580.057:1): state=initialized audit_enabled=0 res=1 <6>[ 0.170504] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.170506] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.170512] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.170517] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.170521] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.170556] cpuidle: using governor ladder <6>[ 0.170556] cpuidle: using governor menu <6>[ 0.170556] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.171376] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.171404] PCI: Using configuration type 1 for base access <6>[ 0.171532] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.173274] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.173274] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.173274] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.173274] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.178843] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.178854] raid6: using avx2x2 recovery algorithm <6>[ 0.179638] fbcon: Taking over console <6>[ 0.179859] ACPI: Added _OSI(Module Device) <6>[ 0.179861] ACPI: Added _OSI(Processor Device) <6>[ 0.179863] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.184245] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.693073] ACPI: 31 ACPI AML tables successfully acquired and loaded <6>[ 0.714607] ACPI: EC: EC started <6>[ 0.714634] ACPI: EC: interrupt blocked <6>[ 0.718714] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.718724] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 0.791238] Callback from call_rcu_tasks() invoked. <6>[ 1.005161] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.005182] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.048676] ACPI: Interpreter enabled <6>[ 1.048840] ACPI: PM: (supports S0 S4 S5) <6>[ 1.048848] ACPI: Using IOAPIC for interrupt routing <6>[ 1.057755] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.057770] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.086212] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.086212] ACPI: Enabled 13 GPEs in block 80 to DF <6>[ 1.149888] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource <6>[ 1.150390] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource <6>[ 1.155305] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.555297] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 1.596013] ACPI: \_SB_.PC00.RP02.PXP_: New power resource <6>[ 1.801745] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource <6>[ 1.806612] ACPI: \_SB_.PC00.RP04.PXP_: New power resource <6>[ 1.831765] ACPI: \_SB_.PC00.RP05.PXP_: New power resource <6>[ 1.863092] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 1.863863] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 1.864621] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.058107] ACPI: \_TZ_.FN00: New power resource <6>[ 2.060067] ACPI: \_TZ_.FN01: New power resource <6>[ 2.061570] ACPI: \_TZ_.FN02: New power resource <6>[ 2.063325] ACPI: \_TZ_.FN03: New power resource <6>[ 2.064823] ACPI: \_TZ_.FN04: New power resource <6>[ 2.068221] ACPI: \PIN_: New power resource <6>[ 2.078281] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.078347] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.087763] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 2.107946] PCI host bridge to bus 0000:00 <6>[ 2.108020] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.108035] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.108048] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.108061] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 2.108075] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window] <6>[ 2.108090] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.113153] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.114180] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.114323] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref] <6>[ 2.114337] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref] <6>[ 2.114350] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref] <6>[ 2.114770] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.116867] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.116901] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit] <6>[ 2.119220] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.119256] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit] <6>[ 2.119268] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit] <6>[ 2.120677] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port <6>[ 2.120718] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.120733] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 2.120753] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 2.120870] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.120970] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.128026] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port <6>[ 2.128076] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.128091] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 2.128112] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 2.128244] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold <6>[ 2.128336] pci 0000:00:07.1: PTM enabled (root), 4ns granularity <6>[ 2.135374] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port <6>[ 2.135419] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.135435] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 2.135455] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 2.135578] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold <6>[ 2.135661] pci 0000:00:07.2: PTM enabled (root), 4ns granularity <6>[ 2.141226] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.141269] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit] <6>[ 2.141286] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.141650] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.141682] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit] <6>[ 2.141693] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit] <6>[ 2.142800] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.142856] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit] <6>[ 2.142935] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.145894] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.145953] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit] <6>[ 2.145966] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit] <6>[ 2.146035] pci 0000:00:0d.2: supports D1 D2 <6>[ 2.146042] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.148168] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.148226] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit] <6>[ 2.148238] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit] <6>[ 2.148308] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.148314] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.150426] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.150487] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit] <6>[ 2.150563] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.154924] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.155025] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit] <6>[ 2.155143] pci 0000:00:13.0: PME# supported from D3hot <6>[ 2.156059] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.156119] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit] <6>[ 2.156202] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.160258] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.160258] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit] <6>[ 2.160258] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit] <6>[ 2.160574] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.160682] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.174403] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.174485] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.187310] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.187411] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.200279] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.200378] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.213348] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.213471] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit] <6>[ 2.213608] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.218775] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port <6>[ 2.218820] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.218833] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 2.218847] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 2.219003] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 2.219110] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity <6>[ 2.226684] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port <6>[ 2.226780] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.226822] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 2.227150] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <6>[ 2.228396] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity <6>[ 2.236048] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.237670] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.237787] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit] <6>[ 2.237809] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit] <6>[ 2.237943] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.239009] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.239085] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit] <6>[ 2.239102] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.241523] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.241647] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.242272] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.242521] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.242760] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.243040] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint <6>[ 2.243113] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff] <6>[ 2.243126] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit] <6>[ 2.243139] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit] <6>[ 2.243810] pci 0000:7f:00.0: supports D1 D2 <6>[ 2.243818] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.244792] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.247813] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.248522] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint <6>[ 2.248574] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit] <6>[ 2.250810] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.250897] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.698090] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 2.698103] Low-power S0 idle used by default for system suspend <6>[ 2.804539] ACPI: EC: interrupt unblocked <6>[ 2.804564] ACPI: EC: event unblocked <6>[ 2.804607] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 2.804624] ACPI: EC: GPE=0x6e <6>[ 2.804640] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 2.804664] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 2.806301] iommu: Default domain type: Translated <6>[ 2.806308] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 2.810590] SCSI subsystem initialized <7>[ 2.811294] libata version 3.00 loaded. <6>[ 2.811902] ACPI: bus type USB registered <6>[ 2.812223] usbcore: registered new interface driver usbfs <6>[ 2.812333] usbcore: registered new interface driver hub <6>[ 2.812451] usbcore: registered new device driver usb <6>[ 2.812812] pps_core: LinuxPPS API ver. 1 registered <6>[ 2.812824] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 2.812880] PTP clock support registered <6>[ 2.813643] EDAC MC: Ver: 3.0.0 <6>[ 2.815489] efivars: Registered efivars operations <6>[ 2.819166] NetLabel: Initializing <6>[ 2.819177] NetLabel: domain hash size = 128 <6>[ 2.819188] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 2.819368] NetLabel: unlabeled traffic allowed by default <6>[ 2.819408] mctp: management component transport protocol core <6>[ 2.819421] NET: Registered PF_MCTP protocol family <6>[ 2.819540] PCI: Using ACPI for IRQ routing <7>[ 2.881819] PCI: pci_cache_line_size set to 64 bytes <6>[ 2.882116] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 2.882286] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 2.882312] e820: reserve RAM buffer [mem 0x68ff8000-0x6bffffff] <7>[ 2.882322] e820: reserve RAM buffer [mem 0x6992d000-0x6bffffff] <7>[ 2.882330] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff] <7>[ 2.882339] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 2.884285] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 2.884311] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 2.884325] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 2.884363] vgaarb: loaded <7>[ 2.888239] Monitor-Mwait will be used to enter C-1 state <7>[ 2.888334] Monitor-Mwait will be used to enter C-2 state <7>[ 2.888334] Monitor-Mwait will be used to enter C-3 state <6>[ 2.900227] clocksource: Switched to clocksource tsc-early <5>[ 2.905984] VFS: Disk quotas dquot_6.6.0 <6>[ 2.906045] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 2.909003] AppArmor: AppArmor Filesystem Enabled <6>[ 2.909473] pnp: PnP ACPI init <6>[ 2.911674] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 2.911703] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 2.915465] system 00:02: [io 0x06a4] has been reserved <6>[ 2.915489] system 00:02: [io 0x06a0] has been reserved <6>[ 2.974344] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 2.974373] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved <6>[ 2.974404] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 2.974427] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 2.974450] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved <6>[ 2.974476] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 2.974503] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 2.974525] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 2.988033] system 00:04: [io 0x2000-0x20fe] has been reserved <6>[ 2.993967] system 00:06: [io 0x1854-0x1857] has been reserved <6>[ 2.994323] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 3.003016] pnp: PnP ACPI: found 8 devices <6>[ 3.019403] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 3.019780] NET: Registered PF_INET protocol family <6>[ 3.020088] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.023910] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 3.024239] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 3.024551] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.025811] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 3.027916] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 3.028572] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.030230] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.031897] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 3.032001] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000 <6>[ 3.032019] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000 <6>[ 3.032034] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000 <6>[ 3.032109] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 3.032119] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned <6>[ 3.032128] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned <6>[ 3.032138] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned <6>[ 3.032170] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned <6>[ 3.032195] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned <6>[ 3.032217] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned <6>[ 3.032243] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned <6>[ 3.032287] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 3.032302] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 3.032314] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 3.032325] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 3.032341] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 3.032352] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff] <6>[ 3.032364] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 3.032375] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 3.032391] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 3.032399] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff] <6>[ 3.032411] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 3.032422] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 3.032438] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 3.032446] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 3.032457] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 3.032472] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 3.032509] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 3.032553] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 3.032561] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 3.032569] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 3.032578] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 3.032587] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window] <6>[ 3.032597] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] <6>[ 3.032604] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff] <6>[ 3.032612] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 3.032622] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff] <6>[ 3.032630] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 3.032638] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 3.032648] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff] <6>[ 3.032655] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 3.032663] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 3.032674] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff] <6>[ 3.032681] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff] <6>[ 3.032689] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff] <6>[ 3.034132] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 3.036290] PCI: CLS 0 bytes, default 64 <6>[ 3.036435] DMAR: No RMRR found <6>[ 3.036450] DMAR: No ATSR found <6>[ 3.036456] DMAR: dmar1: Using Queued invalidation <6>[ 3.036466] DMAR: dmar0: Using Queued invalidation <6>[ 3.036474] DMAR: dmar2: Using Queued invalidation <6>[ 3.037687] pci 0000:00:04.0: Adding to iommu group 0 <6>[ 3.037797] pci 0000:00:05.0: Adding to iommu group 1 <6>[ 3.037907] pci 0000:00:0a.0: Adding to iommu group 2 <6>[ 3.037999] pci 0000:00:0b.0: Adding to iommu group 3 <6>[ 3.042993] pci 0000:00:02.0: Adding to iommu group 4 <6>[ 3.045316] pci 0000:00:00.0: Adding to iommu group 5 <6>[ 3.045423] pci 0000:00:07.0: Adding to iommu group 6 <6>[ 3.045523] pci 0000:00:07.1: Adding to iommu group 7 <6>[ 3.045613] pci 0000:00:07.2: Adding to iommu group 8 <6>[ 3.045740] pci 0000:00:0d.0: Adding to iommu group 9 <6>[ 3.045800] pci 0000:00:0d.2: Adding to iommu group 9 <6>[ 3.045862] pci 0000:00:0d.3: Adding to iommu group 9 <6>[ 3.045975] pci 0000:00:12.0: Adding to iommu group 10 <6>[ 3.046073] pci 0000:00:13.0: Adding to iommu group 11 <6>[ 3.046173] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 3.046239] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 3.046360] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 3.046423] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 3.046484] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 3.046548] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 3.046645] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 3.046732] pci 0000:00:1c.0: Adding to iommu group 15 <6>[ 3.046848] pci 0000:00:1c.4: Adding to iommu group 16 <6>[ 3.046981] pci 0000:00:1f.0: Adding to iommu group 17 <6>[ 3.047045] pci 0000:00:1f.3: Adding to iommu group 17 <6>[ 3.047110] pci 0000:00:1f.4: Adding to iommu group 17 <6>[ 3.047173] pci 0000:00:1f.5: Adding to iommu group 17 <6>[ 3.047264] pci 0000:7f:00.0: Adding to iommu group 18 <6>[ 3.047373] pci 0000:80:00.0: Adding to iommu group 19 <6>[ 3.059554] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 3.059575] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 3.059583] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB) <6>[ 3.065035] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 3.065372] clocksource: Switched to clocksource tsc <6>[ 3.065993] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 3.073201] Initialise system trusted keyrings <5>[ 3.073301] Key type blacklist registered <6>[ 3.073826] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 3.085801] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 3.085964] ntfs3: Enabled Linux POSIX ACLs support <6>[ 3.085971] ntfs3: Read-only LZX/Xpress compression included <5>[ 3.086699] integrity: Platform Keyring initialized <5>[ 3.086726] integrity: Machine keyring initialized <6>[ 3.093225] xor: automatically using best checksumming function avx <5>[ 3.093236] Key type asymmetric registered <5>[ 3.093250] Asymmetric key parser 'x509' registered <6>[ 3.093382] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 3.094260] io scheduler mq-deadline registered <6>[ 3.095505] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.097338] pcieport 0000:00:07.0: PME: Signaling with IRQ 126 <6>[ 3.098186] pcieport 0000:00:07.0: AER: enabled with IRQ 126 <6>[ 3.099493] pcieport 0000:00:07.1: PME: Signaling with IRQ 127 <6>[ 3.100079] pcieport 0000:00:07.1: AER: enabled with IRQ 127 <6>[ 3.101349] pcieport 0000:00:07.2: PME: Signaling with IRQ 128 <6>[ 3.101900] pcieport 0000:00:07.2: AER: enabled with IRQ 128 <6>[ 3.103063] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129 <6>[ 3.103595] pcieport 0000:00:1c.0: AER: enabled with IRQ 129 <6>[ 3.105223] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130 <6>[ 3.105800] pcieport 0000:00:1c.4: AER: enabled with IRQ 130 <6>[ 3.107909] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 3.108152] ACPI: button: Lid Switch [LID0] <6>[ 3.108449] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 3.108673] ACPI: button: Sleep Button [SLPB] <6>[ 3.108945] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 3.109419] ACPI: button: Power Button [PWRB] <6>[ 3.227458] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 3.227486] ACPI: thermal: Thermal Zone [TZ00] (41 C) <6>[ 3.229669] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 3.229998] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 3.231453] ACPI: battery: Slot [BAT0] (battery present) <6>[ 3.253555] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 3.269970] serial 0000:00:12.0: enabling device (0000 -> 0002) <5>[ 3.273292] hpet_acpi_add: no address or irqs in _CRS <6>[ 3.273544] Linux agpgart interface v0.103 <6>[ 3.274303] ACPI: bus type drm_connector registered <7>[ 3.275342] initcall simpledrm_platform_driver_init blacklisted <6>[ 3.299420] loop: module loaded <6>[ 3.342558] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 3.457504] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 3.571590] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 3.685303] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <5>[ 3.798753] Key type psk registered <6>[ 3.801940] nvme 0000:80:00.0: platform quirk: setting simple suspend <6>[ 3.803079] nvme nvme0: pci function 0000:80:00.0 <6>[ 3.803245] tun: Universal TUN/TAP device driver, 1.6 <6>[ 3.804218] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 3.804346] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 3.806188] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 3.808302] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 3.808332] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 3.808355] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 3.808718] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 3.808740] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 3.808751] usb usb1: Product: xHCI Host Controller <6>[ 3.808758] usb usb1: Manufacturer: Linux 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ xhci-hcd <6>[ 3.808770] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 3.810702] hub 1-0:1.0: USB hub found <6>[ 3.810790] hub 1-0:1.0: 1 port detected <6>[ 3.814414] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19 <6>[ 3.814430] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 3.814441] usb usb2: Product: xHCI Host Controller <6>[ 3.814449] usb usb2: Manufacturer: Linux 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ xhci-hcd <6>[ 3.814461] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 3.815254] hub 2-0:1.0: USB hub found <6>[ 3.815310] hub 2-0:1.0: 3 ports detected <6>[ 3.837954] nvme nvme0: 8/0/0 default/read/poll queues <6>[ 3.840548] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 3.840594] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 3.842836] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 3.844697] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 3.844721] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 3.844739] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 3.844970] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 3.844985] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 3.844995] usb usb3: Product: xHCI Host Controller <6>[ 3.845003] usb usb3: Manufacturer: Linux 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ xhci-hcd <6>[ 3.845015] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 3.845821] hub 3-0:1.0: USB hub found <6>[ 3.845869] hub 3-0:1.0: 8 ports detected <6>[ 3.846172] nvme0n1: p1 p2 <6>[ 3.874764] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19 <6>[ 3.874785] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 3.874795] usb usb4: Product: xHCI Host Controller <6>[ 3.874803] usb usb4: Manufacturer: Linux 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ xhci-hcd <6>[ 3.874815] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 3.875627] hub 4-0:1.0: USB hub found <6>[ 3.875673] hub 4-0:1.0: 2 ports detected <6>[ 3.883334] usbcore: registered new interface driver usb-storage <6>[ 3.883524] usbcore: registered new interface driver usbserial_generic <6>[ 3.883615] usbserial: USB Serial support registered for generic <6>[ 3.883690] usbcore: registered new interface driver ftdi_sio <6>[ 3.883728] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 3.883803] usbcore: registered new interface driver pl2303 <6>[ 3.883840] usbserial: USB Serial support registered for pl2303 <6>[ 3.883984] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 3.883995] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 4.595784] i8042: Can't read CTR while initializing i8042 <3>[ 4.595793] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 4.596940] mousedev: PS/2 mouse device common for all mice <6>[ 4.597898] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 4.599721] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 4.599941] rtc_cmos rtc_cmos: setting system clock to 2026-01-20T03:26:25 UTC (1768879585) <6>[ 4.600128] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 4.600192] i2c_dev: i2c /dev entries driver <6>[ 4.605587] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 4.605602] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 4.605613] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 4.605654] device-mapper: uevent: version 1.0.3 <6>[ 4.605968] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 4.605985] intel_pstate: Intel P-state driver initializing <6>[ 4.610118] Hybrid CPU capacity scaling enabled <6>[ 4.610490] processor cpu0: EM: created perf domain <6>[ 4.610761] processor cpu1: EM: created perf domain <6>[ 4.611019] processor cpu2: EM: created perf domain <6>[ 4.611269] processor cpu3: EM: created perf domain <6>[ 4.611520] processor cpu4: EM: created perf domain <6>[ 4.611765] processor cpu5: EM: created perf domain <6>[ 4.612029] processor cpu6: EM: created perf domain <6>[ 4.612290] processor cpu7: EM: created perf domain <6>[ 4.614123] intel_pstate: HWP enabled <6>[ 4.614136] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.614144] sdhci: Copyright(c) Pierre Ossman <6>[ 4.614345] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 4.617882] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c] <6>[ 4.619031] drop_monitor: Initializing network drop monitor service <6>[ 4.619302] NET: Registered PF_INET6 protocol family <6>[ 4.620804] Segment Routing with IPv6 <6>[ 4.620841] In-situ OAM (IOAM) with IPv6 <6>[ 4.620896] NET: Registered PF_PACKET protocol family <5>[ 4.621149] Key type dns_resolver registered <4>[ 4.625544] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 4.626153] microcode: Current revision: 0x00000124 <6>[ 4.626960] IPI shorthand broadcast: enabled <6>[ 4.646207] sched_clock: Marking stable (4636001049, 9882957)->(4705987199, -60103193) <6>[ 4.647075] registered taskstats version 1 <5>[ 4.648523] Loading compiled-in X.509 certificates <6>[ 4.691740] Demotion targets for Node 0: null <6>[ 4.691959] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946) <6>[ 4.691968] kmemleak: Automatic memory scanning thread started <5>[ 4.692209] Key type .fscrypt registered <5>[ 4.692215] Key type fscrypt-provisioning registered <6>[ 4.695085] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 4.697416] Key type encrypted registered <6>[ 4.697427] AppArmor: AppArmor sha256 policy hashing enabled <6>[ 4.697442] ima: No TPM chip found, activating TPM-bypass! <5>[ 4.697457] Loading compiled-in module X.509 certificates <5>[ 4.698068] Loaded X.509 cert 'Build time autogenerated kernel key: a39eba57f2e082a16a6d45bae7767645ea248723' <6>[ 4.698080] ima: Allocated hash algorithm: sha256 <6>[ 4.698130] ima: No architecture policies found <6>[ 4.698239] evm: Initialising EVM extended attributes: <6>[ 4.698243] evm: security.selinux <6>[ 4.698246] evm: security.SMACK64 <6>[ 4.698249] evm: security.SMACK64EXEC <6>[ 4.698252] evm: security.SMACK64TRANSMUTE <6>[ 4.698255] evm: security.SMACK64MMAP <6>[ 4.698258] evm: security.apparmor <6>[ 4.698261] evm: security.ima <6>[ 4.698263] evm: security.capability <6>[ 4.698266] evm: HMAC attrs: 0x1 <6>[ 4.700271] PM: Magic number: 10:162:412 <6>[ 4.700448] netconsole: network logging started <6>[ 4.700968] RAS: Correctable Errors collector initialized. <6>[ 4.701419] clk: Disabling unused clocks <6>[ 4.701431] PM: genpd: Disabling unused power domains <4>[ 4.701608] check access for rdinit=/init failed: -2, ignoring <6>[ 4.701615] md: Waiting for all devices to be available before autodetect <6>[ 4.701620] md: If you don't use raid, use raid=noautodetect <6>[ 4.701625] md: Autodetecting RAID arrays. <6>[ 4.701847] md: autorun ... <6>[ 4.701850] md: ... autorun DONE. <6>[ 4.746118] EXT4-fs (nvme0n1p2): mounted filesystem ab02bed0-b378-4950-9087-63334df65791 ro with ordered data mode. Quota mode: none. <6>[ 4.746181] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 4.746664] devtmpfs: mounted <6>[ 4.764249] Freeing unused decrypted memory: 2036K <6>[ 4.765176] Freeing unused kernel image (initmem) memory: 5724K <6>[ 4.765198] Write protecting the kernel read-only data: 36864k <6>[ 4.765929] Freeing unused kernel image (text/rodata gap) memory: 1052K <6>[ 4.766235] Freeing unused kernel image (rodata/data gap) memory: 568K <6>[ 4.770677] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 4.786196] Run /sbin/init as init process <7>[ 4.786203] with arguments: <7>[ 4.786204] /sbin/init <7>[ 4.786205] with environment: <7>[ 4.786206] HOME=/ <7>[ 4.786206] TERM=linux <7>[ 4.831440] systemd[1]: Inserted module 'autofs4' <7>[ 4.853947] systemd[1]: systemd 255.4-1ubuntu8.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 4.853982] systemd[1]: Detected architecture x86-64. <7>[ 4.855246] systemd[1]: Hostname set to . <7>[ 5.086993] systemd[1]: Queued start job for default target graphical.target. <7>[ 5.112832] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 5.114477] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 5.115937] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 5.116162] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 5.116773] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 5.116880] systemd[1]: Expecting device dev-disk-by\x2duuid-BBB3\x2d0D61.device - /dev/disk/by-uuid/BBB3-0D61... <7>[ 5.116967] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 5.117044] systemd[1]: Reached target slices.target - Slice Units. <7>[ 5.117108] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 5.117183] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 5.117252] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 5.117474] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 5.117833] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 5.118122] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 5.118429] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 5.118672] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 5.118864] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 5.119157] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 5.119463] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 5.119730] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 5.119921] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.120196] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 5.120443] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 5.123720] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 5.126340] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 5.129192] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 5.131891] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 5.138912] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 5.142856] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 5.145947] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 5.149628] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 5.152739] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 5.155335] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 5.158548] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 5.162423] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 5.165696] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 5.170874] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 5.172998] systemd-journald[205]: Collecting audit messages is disabled. <7>[ 5.175774] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 5.176811] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <6>[ 5.178226] pstore: Using crash dump compression: deflate <7>[ 5.181796] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <7>[ 5.187651] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 5.187751] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <6>[ 5.187803] pstore: Registered efi_pstore as persistent store backend <7>[ 5.187822] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <6>[ 5.191579] fuse: init (API version 7.45) <7>[ 5.194608] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <7>[ 5.200602] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 5.339308] EXT4-fs (nvme0n1p2): re-mounted ab02bed0-b378-4950-9087-63334df65791 r/w. <6>[ 5.364730] Adding 8388604k swap on /swap.img. Priority:-1 extents:65 across:341704704k SS <7>[ 5.378502] systemd-journald[205]: Received client request to flush runtime journal. <7>[ 5.393678] systemd-journald[205]: /var/log/journal/b767726c6704475694a1e926e667900b/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 5.393696] systemd-journald[205]: Rotating system journal. <4>[ 6.048538] nvme nvme0: using unchecked data buffer <6>[ 6.227482] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 6.286220] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <5>[ 6.305463] audit: type=1400 audit(1768879587.203:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=406 comm="apparmor_parser" <5>[ 6.305947] audit: type=1400 audit(1768879587.204:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=405 comm="apparmor_parser" <5>[ 6.306312] audit: type=1400 audit(1768879587.204:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=404 comm="apparmor_parser" <5>[ 6.308894] audit: type=1400 audit(1768879587.206:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=408 comm="apparmor_parser" <5>[ 6.309301] audit: type=1400 audit(1768879587.207:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=407 comm="apparmor_parser" <5>[ 6.311065] audit: type=1400 audit(1768879587.209:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=409 comm="apparmor_parser" <5>[ 6.314014] audit: type=1400 audit(1768879587.212:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=410 comm="apparmor_parser" <5>[ 6.315524] audit: type=1400 audit(1768879587.213:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=411 comm="apparmor_parser" <5>[ 6.317567] audit: type=1400 audit(1768879587.215:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=412 comm="apparmor_parser" <5>[ 6.320124] audit: type=1400 audit(1768879587.217:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=413 comm="apparmor_parser" <6>[ 6.326277] input: Intel HID events as /devices/platform/INTC107B:00/input/input3 <6>[ 6.350246] intel-hid INTC107B:00: platform supports 5 button array <6>[ 6.351507] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4 <3>[ 6.477566] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121 <3>[ 6.477708] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121 <6>[ 6.654256] pci 0000:00:05.0: Setting to D3hot <6>[ 6.667486] pci 0000:00:0b.0: Setting to D3hot <6>[ 6.679367] intel_pmc_core INT33A1:00: initialized <6>[ 6.736742] ACPI: bus type thunderbolt registered <6>[ 6.753582] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 6.763739] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43 <6>[ 6.763748] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 6.806815] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 6.820959] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 6.840252] r8169 0000:7f:00.0: enabling device (0000 -> 0003) <6>[ 6.840912] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 6.842217] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 6.858630] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 6.928016] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 6.928027] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 6.928028] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 6.928032] RAPL PMU: hw unit of domain dram 2^-14 Joules <6>[ 6.928033] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 6.929396] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402) <6>[ 6.935580] intel_rapl_common: Found RAPL domain package <6>[ 6.935590] intel_rapl_common: Found RAPL domain dram <6>[ 6.945304] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c9:30:ac, XID 541, IRQ 175 <6>[ 6.945314] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] <6>[ 6.975985] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 6.977051] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 7.071603] block nvme0n1: No UUID available providing old NGUID <6>[ 7.151306] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0 <6>[ 7.161304] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.216234] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin <6>[ 7.233979] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.242288] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.244643] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888 <6>[ 7.244649] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716 <6>[ 7.244651] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472 <6>[ 7.528700] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.541209] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.687519] loop0: detected capacity change from 0 to 8 <6>[ 7.820501] intel_rapl_common: Found RAPL domain package <6>[ 7.820507] intel_rapl_common: Found RAPL domain core <6>[ 7.820510] intel_rapl_common: Found RAPL domain dram <6>[ 7.820512] intel_rapl_common: Found RAPL domain psys <6>[ 7.837752] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.864366] r8169 0000:7f:00.0 enp127s0: renamed from eth0 <4>[ 7.884532] spi-nor spi0.0: supply vcc not found, using dummy regulator <5>[ 7.945511] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 7.945528] 0x000000000000-0x000002000000 : "BIOS" <6>[ 7.963476] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.994112] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.012001] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC) <6>[ 8.110457] Consider using thermal netlink events interface <6>[ 8.171176] r8169 0000:7f:00.0 enp127s0: Link is Down <6>[ 8.259597] hid: raw HID events driver (C) Jiri Kosina <6>[ 8.266486] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.267663] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 8.301941] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.307214] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.308702] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.310030] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.310851] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.311660] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.313185] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 8.313716] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.313879] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 8.316841] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.318403] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.321664] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.323451] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.324773] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.325325] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.327215] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.327673] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.328951] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.330420] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 8.332011] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.332328] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 8.334134] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.411413] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.416487] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.421354] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.425853] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.432318] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.436568] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.441724] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.446530] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.451503] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.454687] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.458929] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.463875] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.467639] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.472275] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.476476] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.480676] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.484841] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.489240] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.494109] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.498587] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 9.862509] typec port0: bound usb3-port1 (ops connector_ops) <6>[ 9.862548] typec port0: bound usb2-port1 (ops connector_ops) <6>[ 9.862573] typec port0: bound usb4_port1 (ops connector_ops [thunderbolt]) <6>[ 10.863909] typec port1: bound usb3-port2 (ops connector_ops) <6>[ 10.863939] typec port1: bound usb2-port2 (ops connector_ops) <6>[ 10.863970] typec port1: bound usb4_port3 (ops connector_ops [thunderbolt]) <6>[ 11.768402] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off <6>[ 18.518483] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 18.522562] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 37.290227] systemd-journald[205]: /var/log/journal/b767726c6704475694a1e926e667900b/user-1000.journal: Journal file uses a different sequence number ID, rotating. <6>[ 41.568495] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <7>[ 52.939968] [IGT] xe_module_load: executing <4>[ 52.940576] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 52.948552] [IGT] xe_module_load: starting subtest load <5>[ 53.224832] Setting dangerous option force_probe - tainting kernel <6>[ 53.228159] xe 0000:00:02.0: vgaarb: deactivate vga console <6>[ 53.229791] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7>[ 53.229801] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7>[ 53.229940] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7>[ 53.230056] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7>[ 53.231957] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7>[ 53.232101] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7>[ 53.232204] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 53.232326] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7>[ 53.232453] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7>[ 53.232549] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7>[ 53.232645] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7>[ 53.232733] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7>[ 53.232817] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7>[ 53.232921] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 53.233016] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7>[ 53.233135] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7>[ 53.233250] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7>[ 53.233370] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7>[ 53.233485] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7>[ 53.233595] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7>[ 53.233702] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7>[ 53.233815] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7>[ 53.233921] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7>[ 53.234026] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7>[ 53.234126] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 53.234221] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 53.234327] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7>[ 53.234430] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 53.234542] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 53.234664] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 53.234785] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7>[ 53.234900] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 53.234994] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 53.235089] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 53.235189] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7>[ 53.235293] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 53.235410] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 53.235526] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 53.235632] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7>[ 53.235730] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 53.235829] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 53.235926] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 53.236023] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7>[ 53.236113] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 53.236200] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 53.236306] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 53.236427] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7>[ 53.236830] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7>[ 53.237002] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7>[ 53.237160] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7>[ 53.237312] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7>[ 53.237461] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7>[ 53.237604] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7>[ 53.237746] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7>[ 53.237902] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7>[ 53.238033] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7>[ 53.238152] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7>[ 53.238278] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7>[ 53.238423] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7>[ 53.238559] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7>[ 53.238674] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7>[ 53.238777] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7>[ 53.238879] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 53.238984] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7>[ 53.239088] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7>[ 53.239196] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 53.239313] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 53.239454] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 53.239589] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7>[ 53.239700] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 53.239802] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 53.239900] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 53.240002] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 53.240113] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7>[ 53.240241] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 53.240431] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7>[ 53.240616] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 53.240936] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7>[ 53.241116] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7>[ 53.241260] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7>[ 53.241423] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 53.241560] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 53.241707] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <6>[ 53.241819] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem <7>[ 53.241836] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7>[ 53.241964] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7>[ 53.242077] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7>[ 53.242189] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7>[ 53.242430] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7>[ 53.242897] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7>[ 53.243806] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7>[ 53.243939] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7>[ 53.244057] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7>[ 53.244145] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7>[ 53.244232] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7>[ 53.244324] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7>[ 53.244416] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7>[ 53.244505] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7>[ 53.244595] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7>[ 53.244677] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7>[ 53.244757] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7>[ 53.244839] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7>[ 53.244919] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7>[ 53.244997] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7>[ 53.246745] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7>[ 53.246861] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 53.246982] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 53.247089] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7>[ 53.247194] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7>[ 53.247300] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7>[ 53.247456] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7>[ 53.247592] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7>[ 53.247725] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 53.247860] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7>[ 53.248022] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 53.248197] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7>[ 53.248384] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 53.248552] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7>[ 53.248724] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7>[ 53.248887] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7>[ 53.249058] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 53.249230] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7>[ 53.249417] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 53.249585] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7>[ 53.249750] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 53.249916] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7>[ 53.250090] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7>[ 53.250254] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7>[ 53.250584] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 53.250746] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7>[ 53.250907] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 53.251017] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available. <7>[ 53.251069] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7>[ 53.251227] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 53.251398] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7>[ 53.257515] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 53.257717] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7>[ 53.257907] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7>[ 53.258143] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:387:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 53.258673] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:387:DDI A/PHY A] <7>[ 53.258941] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7>[ 53.259158] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7>[ 53.259352] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7>[ 53.259536] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 53.259730] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7>[ 53.259911] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 53.260073] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7>[ 53.260232] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7>[ 53.260409] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 53.260611] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:387:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 53.260900] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 53.261052] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 53.261201] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 53.261362] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 53.261507] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 53.261798] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 53.262123] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <6>[ 53.263352] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7>[ 53.263366] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turning VDD on <7>[ 53.263567] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 53.264738] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 53.265140] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7>[ 53.265554] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7>[ 53.266118] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7>[ 53.266455] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7>[ 53.268164] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 53.277347] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 53.277357] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.277359] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.277360] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 53.277363] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 53.277365] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.277367] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD monitor <5>[ 53.277372] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.277373] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD size 20, SAD count 0 <5>[ 53.277376] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.277418] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.277420] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.277421] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.277438] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:388:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.277582] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:388:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.277905] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:388:eDP-1] Performing OUI wait (0 ms) <7>[ 53.278250] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:388:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 53.278393] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:388:eDP-1] DRRS type: seamless <7>[ 53.278543] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:388:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 53.278706] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:388:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 53.278873] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 53.278972] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 53.279057] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 53.279139] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 53.279221] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 53.279340] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 53.279548] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:396:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 53.279730] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 53.279854] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:396:DDI TC1/PHY TC1] <7>[ 53.280228] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:408:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 53.280366] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 53.280493] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:408:DDI TC2/PHY TC2] <7>[ 53.280749] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:416:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 53.280873] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 53.280989] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:416:DDI TC3/PHY TC3] <7>[ 53.281458] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:148:pipe A] hw state readout: enabled <7>[ 53.281604] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:266:pipe B] hw state readout: disabled <7>[ 53.281731] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:384:pipe C] hw state readout: disabled <7>[ 53.281819] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: enabled, pipe A <7>[ 53.281907] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7>[ 53.281995] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7>[ 53.282082] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7>[ 53.282168] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7>[ 53.282254] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7>[ 53.282355] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] hw state readout: disabled, pipe B <7>[ 53.282471] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] hw state readout: disabled, pipe B <7>[ 53.282581] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] hw state readout: disabled, pipe B <7>[ 53.282684] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] hw state readout: disabled, pipe B <7>[ 53.282768] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] hw state readout: disabled, pipe B <7>[ 53.282850] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] hw state readout: disabled, pipe B <7>[ 53.282929] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] hw state readout: disabled, pipe C <7>[ 53.283007] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] hw state readout: disabled, pipe C <7>[ 53.283086] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] hw state readout: disabled, pipe C <7>[ 53.283163] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] hw state readout: disabled, pipe C <7>[ 53.283240] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] hw state readout: disabled, pipe C <7>[ 53.283317] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] hw state readout: disabled, pipe C <7>[ 53.284113] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 53.284223] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:387:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 53.284307] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 53.284401] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:396:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 53.284489] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:398:DP-MST A] hw state readout: disabled, pipe A <7>[ 53.284575] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DP-MST B] hw state readout: disabled, pipe B <7>[ 53.284660] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:400:DP-MST C] hw state readout: disabled, pipe C <7>[ 53.284745] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 53.284825] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:408:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 53.284901] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:410:DP-MST A] hw state readout: disabled, pipe A <7>[ 53.284975] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DP-MST B] hw state readout: disabled, pipe B <7>[ 53.285049] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:412:DP-MST C] hw state readout: disabled, pipe C <7>[ 53.285126] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 53.285203] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:416:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 53.285276] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:418:DP-MST A] hw state readout: disabled, pipe A <7>[ 53.285354] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DP-MST B] hw state readout: disabled, pipe B <7>[ 53.285432] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:420:DP-MST C] hw state readout: disabled, pipe C <7>[ 53.285538] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:388:eDP-1] hw state readout: enabled <7>[ 53.285872] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:397:DP-1] hw state readout: disabled <7>[ 53.285952] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:409:DP-2] hw state readout: disabled <7>[ 53.286031] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:417:DP-3] hw state readout: disabled <7>[ 53.286233] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 173855 kHz <7>[ 53.286307] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7>[ 53.286394] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7>[ 53.286473] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7>[ 53.286551] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7>[ 53.286628] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz <7>[ 53.286706] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:148:pipe A] min_cdclk 173855 kHz <7>[ 53.286776] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] min_cdclk 0 kHz <7>[ 53.286843] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] min_cdclk 0 kHz <7>[ 53.286912] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] min_cdclk 0 kHz <7>[ 53.286985] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] min_cdclk 0 kHz <7>[ 53.287057] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] min_cdclk 0 kHz <7>[ 53.287128] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] min_cdclk 0 kHz <7>[ 53.287198] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:266:pipe B] min_cdclk 0 kHz <7>[ 53.287268] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] min_cdclk 0 kHz <7>[ 53.287345] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] min_cdclk 0 kHz <7>[ 53.287419] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] min_cdclk 0 kHz <7>[ 53.287493] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] min_cdclk 0 kHz <7>[ 53.287565] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] min_cdclk 0 kHz <7>[ 53.287637] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] min_cdclk 0 kHz <7>[ 53.287706] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:384:pipe C] min_cdclk 0 kHz <7>[ 53.287921] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:148:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 53.287999] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:266:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 53.288076] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:384:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 53.288150] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1 <7>[ 53.288255] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7>[ 53.288365] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7>[ 53.288514] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 53.288628] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A <7>[ 53.288866] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:148:pipe A] enable: yes [setup_hw_state] <7>[ 53.288983] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 53.289092] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 53.289191] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 53.289285] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 53.289392] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 53.289494] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 53.289593] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64 <7>[ 53.289692] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 53.289782] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 53.289871] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 53.289959] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 53.290046] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 53.290132] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 53.290217] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 53.290303] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 53.290408] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96 <7>[ 53.290502] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 53.290593] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.290683] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.290766] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 53.290847] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.290935] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 53.291024] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 53.291111] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 53.291197] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 53.291284] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 53.291376] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 53.291468] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x41eb0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 53.291562] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 53.291653] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 53.291737] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 53.291817] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.291896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.291975] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.292054] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 53.292131] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 53.292207] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.292285] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.292366] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.292451] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 53.292544] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 53.292633] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:266:pipe B] enable: no [setup_hw_state] <7>[ 53.292721] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:384:pipe C] enable: no [setup_hw_state] <7>[ 53.292990] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:148:pipe A][PLANE:33:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 53.293089] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:33:plane 1A] on [CRTC:148:pipe A] <6>[ 53.305584] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7>[ 53.309028] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x003543f7 <7>[ 53.309145] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7>[ 53.309242] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7>[ 53.309331] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 53.309426] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000008d2 <7>[ 53.309507] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 53.309584] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 53.309660] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 53.309734] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 53.309800] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 53.309865] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 53.309930] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 53.309995] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 53.310058] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 53.310120] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 53.310229] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7>[ 53.320427] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 53.321232] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 53.321469] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000000df <7>[ 53.321557] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000000df <7>[ 53.321642] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7>[ 53.321723] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7>[ 53.321799] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6>[ 53.962369] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6>[ 53.962373] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6>[ 53.962374] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7>[ 53.962511] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7>[ 53.962639] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 53.962749] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 53.962849] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 53.962975] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7>[ 53.963125] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7>[ 53.963262] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7>[ 53.963360] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 53.963464] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 53.963568] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 53.964820] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7>[ 53.964964] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7>[ 53.965094] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7>[ 53.965226] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7>[ 53.965350] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7>[ 53.965453] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7>[ 53.965542] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7>[ 53.965630] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7>[ 53.965716] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7>[ 53.965800] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7>[ 53.965885] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7>[ 53.965970] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7>[ 53.966076] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7>[ 53.966186] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7>[ 53.966293] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7>[ 53.966398] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7>[ 53.966479] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7>[ 53.966559] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7>[ 53.966640] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7>[ 53.966720] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7>[ 53.966802] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7>[ 53.966886] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7>[ 53.966967] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7>[ 53.967069] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7>[ 53.967170] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7>[ 53.967269] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7>[ 53.967376] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7>[ 53.967469] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7>[ 53.967552] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7>[ 53.967637] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7>[ 53.967717] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7>[ 53.967797] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7>[ 53.967878] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7>[ 53.967958] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7>[ 53.968056] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7>[ 53.968159] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7>[ 53.968261] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7>[ 53.968370] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7>[ 53.968459] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7>[ 53.968548] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7>[ 53.968852] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7>[ 53.968942] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7>[ 53.969030] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7>[ 53.969131] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7>[ 53.969480] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7>[ 53.969558] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7>[ 53.969631] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7>[ 53.969703] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7>[ 53.970004] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7>[ 53.970093] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7>[ 53.970185] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7>[ 53.970275] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7>[ 53.970362] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7>[ 53.970435] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7>[ 53.970510] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7>[ 53.970959] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7>[ 53.971101] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x003543f7 <7>[ 53.971205] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7>[ 53.971306] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7>[ 53.971399] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 53.971483] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000008d2 <7>[ 53.971555] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 53.971625] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 53.971695] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 53.971766] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 53.971838] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 53.971908] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 53.971977] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 53.972059] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 53.972145] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 53.972258] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7>[ 53.972452] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7>[ 53.973510] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xd19000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 53.975896] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7>[ 53.992087] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7>[ 54.003005] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 54.003362] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 54.004382] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7>[ 54.004515] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7>[ 54.004604] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7>[ 54.004687] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7>[ 54.004768] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7>[ 54.004845] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7>[ 54.004921] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7>[ 54.004997] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7>[ 54.005087] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000 <7>[ 54.007610] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7>[ 54.007713] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606 <7>[ 54.007801] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7>[ 54.010325] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7>[ 54.010454] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6>[ 54.014776] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7>[ 54.018733] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00df63f7 <7>[ 54.018837] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 54.018919] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7>[ 54.018997] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 54.019089] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00001e16 <7>[ 54.019188] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 54.019285] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 54.019374] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 54.019449] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 54.019519] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 54.019588] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 54.019657] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 54.019724] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 54.019793] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6>[ 54.021159] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6>[ 54.023640] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6>[ 54.024636] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7>[ 54.024744] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 54.024865] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7>[ 54.046110] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 54.046771] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 54.047142] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7>[ 54.047367] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7>[ 54.047580] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7>[ 54.047827] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7>[ 54.048028] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6>[ 54.048250] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6>[ 54.048254] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6>[ 54.048256] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6>[ 54.048258] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6>[ 54.048260] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6>[ 54.048262] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6>[ 54.048264] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6>[ 54.048267] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6>[ 54.048269] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6>[ 54.048271] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7>[ 54.048380] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7>[ 54.048743] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7>[ 54.049055] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7>[ 54.050722] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7>[ 54.050950] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7>[ 54.051184] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7>[ 54.051386] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7>[ 54.051588] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7>[ 54.051777] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7>[ 54.051976] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7>[ 54.052173] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7>[ 54.052335] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7>[ 54.052495] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7>[ 54.052655] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7>[ 54.052813] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7>[ 54.052968] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7>[ 54.053122] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7>[ 54.053269] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7>[ 54.053407] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7>[ 54.053545] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7>[ 54.053694] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7>[ 54.053847] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7>[ 54.053976] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7>[ 54.054104] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7>[ 54.054227] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7>[ 54.054348] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7>[ 54.054469] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7>[ 54.054591] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7>[ 54.054705] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7>[ 54.054818] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7>[ 54.054931] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7>[ 54.055041] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7>[ 54.055173] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7>[ 54.055293] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7>[ 54.055778] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7>[ 54.055890] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7>[ 54.056011] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7>[ 54.056456] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7>[ 54.056566] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7>[ 54.056679] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7>[ 54.057584] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7>[ 54.057736] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00df63f7 <7>[ 54.057850] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 54.057963] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7>[ 54.058066] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 54.058177] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00001e16 <7>[ 54.058270] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 54.058361] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 54.058446] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 54.058528] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 54.058608] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 54.058690] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 54.058769] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 54.058850] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 54.058928] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7>[ 54.059023] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7>[ 54.059146] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7>[ 54.060494] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1984000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 54.078865] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056) <7>[ 54.100082] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 54.100591] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 54.101819] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7>[ 54.102080] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 54.104394] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7>[ 54.104655] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 54.108208] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7>[ 54.108602] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 54.155213] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7>[ 54.156509] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 54.156970] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 54.157360] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 54.157687] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 54.158925] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7>[ 54.159234] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7>[ 54.159505] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7>[ 54.161485] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 0: start 0x90008 <7>[ 54.161942] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 1: start 0x90108 <7>[ 54.162321] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 2: start 0x90208 <7>[ 54.162645] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 3: start 0x90308 <7>[ 54.162943] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 4: start 0x903c8 <7>[ 54.163237] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 0: start 0x98008 <7>[ 54.163513] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 1: start 0x98108 <7>[ 54.163777] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 2: start 0x98208 <7>[ 54.164030] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 3: start 0x98308 <7>[ 54.164292] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 4: start 0x983c8 <7>[ 54.164541] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 0: start 0x52008 <7>[ 54.164784] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 1: start 0x52108 <7>[ 54.165026] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 2: start 0x52208 <7>[ 54.165278] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 3: start 0x52308 <7>[ 54.165521] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 4: start 0x523c8 <7>[ 54.166480] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 54.166850] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:148:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 54.167146] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7>[ 54.167465] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:266:pipe B] enable: no [fastset] <7>[ 54.167862] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:384:pipe C] enable: no [fastset] <7>[ 54.170304] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7>[ 54.170578] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7>[ 54.181990] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:266:pipe B] <7>[ 54.182564] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:384:pipe C] <7>[ 54.196730] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:388:eDP-1] adding connector to sysfs <7>[ 54.201162] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:388:eDP-1] backlight device intel_backlight registered <7>[ 54.201442] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:388:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 54.201660] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:388:eDP-1] Panel prepare <7>[ 54.202370] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 54.205047] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:388:eDP-1] generating connector hotplug event <7>[ 54.205328] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:397:DP-1] adding connector to sysfs <7>[ 54.206369] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7>[ 54.208014] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:397:DP-1] generating connector hotplug event <7>[ 54.208102] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:409:DP-2] adding connector to sysfs <7>[ 54.209014] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7>[ 54.209911] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:409:DP-2] generating connector hotplug event <7>[ 54.209975] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:417:DP-3] adding connector to sysfs <7>[ 54.210566] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 54.211746] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:417:DP-3] generating connector hotplug event <6>[ 54.211805] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7>[ 54.211871] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6>[ 54.227633] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 54.233695] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 54.236118] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 54.236304] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 54.236313] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 54.236312] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7>[ 54.238567] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:397:DP-1] <7>[ 54.238784] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.239040] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:397:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 54.239162] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:409:DP-2] <7>[ 54.239284] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:33:plane 1A] no fb, skipping <7>[ 54.239428] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:266:pipe B] not active, skipping <7>[ 54.239548] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:384:pipe C] not active, skipping <7>[ 54.239648] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7>[ 54.240003] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 54.239967] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.240103] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:409:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 54.240216] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:417:DP-3] <7>[ 54.240361] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.240483] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:417:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 54.240594] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 54.241026] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] <7>[ 54.241040] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:388:eDP-1] <7>[ 54.241644] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 54.242000] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 54.242135] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 54.242240] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 54.242990] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 54.243000] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.243003] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.243004] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 54.243008] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 54.243010] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.243012] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD monitor <5>[ 54.243018] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.243020] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD size 20, SAD count 0 <5>[ 54.243023] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.243058] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] VRR capable: yes <7>[ 54.243178] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 54.243288] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 54.243848] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] status updated from unknown to connected <7>[ 54.244093] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <5>[ 54.244608] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.244613] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.244615] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.244693] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] probed modes: <7>[ 54.244702] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.244707] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.244712] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] <7>[ 54.244717] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:397:DP-1] <7>[ 54.244930] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] disconnected <7>[ 54.244936] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] <7>[ 54.244941] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:409:DP-2] <7>[ 54.245087] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] disconnected <7>[ 54.245091] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] <7>[ 54.245095] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:417:DP-3] <7>[ 54.245224] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] disconnected <7>[ 54.245228] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] enabled? yes <7>[ 54.245232] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:397:DP-1] enabled? no <7>[ 54.245235] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:409:DP-2] enabled? no <7>[ 54.245238] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:417:DP-3] enabled? no <7>[ 54.245418] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 54.245452] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] found preferred mode: 2880x1800 <7>[ 54.245456] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 54.245472] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:148:pipe A] desired mode 2880x1800 set (0,0) <7>[ 54.245607] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 54.245625] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7>[ 54.258563] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000 <7>[ 54.258723] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:388:eDP-1] set backlight level = 13892 <6>[ 54.260487] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7>[ 54.260858] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7>[ 54.273071] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01da5000 <6>[ 54.273983] fbcon: xedrmfb (fb0) is primary device <7>[ 54.274960] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:388:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 54.275116] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:387:DDI A/PHY A][CRTC:148:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 54.275230] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7>[ 54.275380] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:148:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 54.275529] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:387:DDI A/PHY A] [CRTC:148:pipe A] <7>[ 54.275674] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288) <7>[ 54.275797] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10 <7>[ 54.275909] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7>[ 54.276016] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes, <7>[ 54.276134] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1, <7>[ 54.276254] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 54.276396] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state: <7>[ 54.276531] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21 <7>[ 54.276657] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 54.276773] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 54.276880] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 54.276984] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 54.277085] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 54.277181] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7>[ 54.277321] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no, <7>[ 54.277443] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 54.277562] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state: <7>[ 54.277679] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21 <7>[ 54.277788] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 54.277887] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 54.277981] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 54.278077] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 54.278172] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 54.278280] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 54.278429] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000) <7>[ 54.278558] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0) <7>[ 54.278685] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:148:pipe A] fastset requirement not met, forcing full modeset <7>[ 54.278832] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7>[ 54.278928] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 54.279022] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7>[ 54.279113] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7>[ 54.279202] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7>[ 54.279294] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.279394] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.279494] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.279604] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.279700] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.279790] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.279868] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.279946] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.280022] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.280109] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.280199] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.280293] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.280376] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.280450] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.280524] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.280600] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.280671] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:143:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.280741] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:143:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.280811] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:143:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.280885] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:143:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.280969] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:148:pipe A] data rate 1390840 num active planes 1 <7>[ 54.281078] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7>[ 54.281183] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7>[ 54.281292] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 54.281423] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 54.281557] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7>[ 54.281733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:148:pipe A] enable: yes [modeset] <7>[ 54.281851] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 54.281970] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 54.282077] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 54.282181] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 54.282288] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 54.282415] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 54.282545] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7>[ 54.282672] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 54.282780] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 54.282888] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 54.282992] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 54.283088] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 54.283188] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 54.283293] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7>[ 54.283408] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7>[ 54.283522] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7>[ 54.283636] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7>[ 54.283749] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7>[ 54.283842] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7>[ 54.283859] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7>[ 54.283934] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 54.284029] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 54.284123] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7>[ 54.284213] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 54.284329] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.284443] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.284559] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 54.284681] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.284792] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 54.284883] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 54.284973] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 54.285061] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 54.285146] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 54.285233] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 54.285339] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 54.285448] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 54.285556] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 54.285652] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 54.285733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.285815] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.285898] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.285979] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 54.286060] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 54.286139] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.286218] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.286306] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.286412] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 54.286517] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 54.286628] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:389] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 54.286746] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 54.286846] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 54.286933] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7>[ 54.287018] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7>[ 54.287104] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7>[ 54.287188] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7>[ 54.287271] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7>[ 54.308859] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7>[ 54.309198] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7>[ 54.512698] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:388:eDP-1] set backlight PWM = 0 <7>[ 54.514445] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7>[ 54.535636] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turn panel power off <7>[ 54.535852] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 54.536175] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 54.536342] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:387:DDI A/PHY A] - short <7>[ 54.536717] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 54.588698] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 54.589070] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:387:DDI A/PHY A] - short <7>[ 54.597623] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 54.598362] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7>[ 54.599526] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x1341b072) <7>[ 54.599494] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:387:DDI A/PHY A] <7>[ 54.600079] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:387:DDI A/PHY A] <7>[ 54.600208] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:387:DDI A/PHY A] <7>[ 54.600614] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:396:DDI TC1/PHY TC1] <7>[ 54.601063] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:398:DP-MST A] <7>[ 54.601504] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DP-MST B] <7>[ 54.602036] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:400:DP-MST C] <7>[ 54.602519] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:408:DDI TC2/PHY TC2] <7>[ 54.602995] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:410:DP-MST A] <7>[ 54.603464] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DP-MST B] <7>[ 54.603930] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:412:DP-MST C] <7>[ 54.604358] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DDI TC3/PHY TC3] <7>[ 54.604795] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:418:DP-MST A] <7>[ 54.605209] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DP-MST B] <7>[ 54.605623] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:420:DP-MST C] <7>[ 54.606085] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 54.607753] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turn panel power on <7>[ 54.608256] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 wait for panel power cycle (490 ms remaining) <7>[ 54.622795] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 54.623158] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:387:DDI A/PHY A] - long <7>[ 54.623462] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 54.623747] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:387:DDI A/PHY A] <7>[ 54.695554] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7>[ 55.105288] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 55.203420] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 55.203801] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 55.204220] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 55.239972] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 55.240602] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:387:DDI A/PHY A] - long <7>[ 55.241073] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 55.241709] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:387:DDI A/PHY A] <7>[ 55.257864] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.257864] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.257866] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.411627] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 55.414055] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turning VDD on <7>[ 55.414669] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 55.417259] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 55.418565] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 55.419597] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7>[ 55.421001] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 55.422342] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 55.423564] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 55.424065] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7>[ 55.425723] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 55.426206] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7>[ 55.427255] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7>[ 55.427957] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7>[ 55.428513] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7>[ 55.429110] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:388:eDP-1] set backlight PWM = 13892 <7>[ 55.444939] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7>[ 55.447475] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:388:eDP-1] <7>[ 55.448079] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:148:pipe A] <7>[ 55.449753] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 55.451378] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <6>[ 55.453830] Console: switching to colour frame buffer device 180x56 <6>[ 55.500500] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7>[ 55.500595] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7>[ 55.501312] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7>[ 55.501940] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7>[ 55.502513] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7>[ 55.503027] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7>[ 55.503562] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7>[ 55.504070] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7>[ 55.504558] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7>[ 55.505017] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7>[ 55.505534] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7>[ 55.505971] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7>[ 55.506434] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7>[ 55.506856] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7>[ 55.507258] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7>[ 55.507681] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7>[ 55.508070] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7>[ 55.508420] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7>[ 55.508771] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7>[ 55.509167] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7>[ 55.509518] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7>[ 55.509824] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7>[ 55.510118] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7>[ 55.511338] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7>[ 55.511758] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7>[ 55.512206] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7>[ 55.512717] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7>[ 55.513233] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7>[ 55.513676] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 55.514150] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.514592] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.516006] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 55.521999] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7>[ 55.525580] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 55.525719] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 55.528182] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 55.528274] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 55.530756] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] <7>[ 55.530924] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:388:eDP-1] <7>[ 55.532483] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 55.533010] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 55.533463] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.533838] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.535105] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 55.535123] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.535127] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.535130] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 55.535136] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 55.535140] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.535144] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD monitor <5>[ 55.535166] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.535169] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD size 20, SAD count 0 <5>[ 55.535173] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.535229] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] VRR capable: yes <7>[ 55.535465] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 55.535666] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5>[ 55.536784] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.536790] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.536793] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.536953] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] probed modes: <7>[ 55.536976] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 55.536985] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 55.537002] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] <7>[ 55.537019] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:397:DP-1] <7>[ 55.537546] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.537959] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] disconnected <7>[ 55.537974] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] <7>[ 55.537981] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:409:DP-2] <7>[ 55.538193] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.538361] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] disconnected <7>[ 55.538367] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] <7>[ 55.538373] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:417:DP-3] <7>[ 55.538591] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.538764] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] disconnected <7>[ 55.538771] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] enabled? yes <7>[ 55.538778] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:397:DP-1] enabled? no <7>[ 55.538783] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:409:DP-2] enabled? no <7>[ 55.538787] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:417:DP-3] enabled? no <7>[ 55.539105] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 55.539149] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] found preferred mode: 2880x1800 <7>[ 55.539155] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 55.539234] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:148:pipe A] desired mode 2880x1800 set (0,0) <6>[ 55.539882] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7>[ 55.543007] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7>[ 55.543296] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 55.546969] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 55.547341] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 55.548308] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7>[ 55.548882] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 55.548889] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 55.579653] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 55.589886] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.590055] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.590145] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.590231] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.590314] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.590395] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.590493] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.590593] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.590693] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.590794] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.590888] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.590971] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.591046] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.591121] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.591200] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.591280] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.591360] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.591444] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.591536] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.591623] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.591702] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.591785] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.591865] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.591943] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.592021] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.592099] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.592176] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.592253] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.592327] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.592395] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.592487] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.592578] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.592670] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.592759] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.592831] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.592901] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.594757] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 55.594779] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 55.595973] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.596292] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] <7>[ 55.596259] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.596314] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:388:eDP-1] <7>[ 55.597007] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 55.598462] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 55.598938] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 55.599052] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.599148] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.600009] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 55.600020] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.600022] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.600024] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 55.600027] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 55.600030] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.600032] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD monitor <5>[ 55.600108] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.600110] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD size 20, SAD count 0 <5>[ 55.600113] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.600188] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] VRR capable: yes <7>[ 55.600294] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 55.600395] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5>[ 55.603528] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.603536] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.603538] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.603624] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] probed modes: <7>[ 55.603650] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 55.603655] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 55.603661] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] <7>[ 55.603666] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:397:DP-1] <6>[ 55.603796] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <7>[ 55.603940] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] disconnected <7>[ 55.603947] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] <7>[ 55.603951] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:409:DP-2] <7>[ 55.604153] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] disconnected <7>[ 55.604158] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] <7>[ 55.604162] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:417:DP-3] <7>[ 55.604292] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] disconnected <7>[ 55.604296] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] enabled? yes <7>[ 55.604301] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:397:DP-1] enabled? no <7>[ 55.604304] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:409:DP-2] enabled? no <7>[ 55.604307] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:417:DP-3] enabled? no <7>[ 55.605239] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 55.605285] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] found preferred mode: 2880x1800 <7>[ 55.605290] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 55.605428] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:148:pipe A] desired mode 2880x1800 set (0,0) <6>[ 55.606388] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <7>[ 55.606615] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 55.606768] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <6>[ 55.607932] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 55.608654] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 55.646637] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 55.695915] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 55.696158] [IGT] xe_module_load: finished subtest load, SUCCESS <7>[ 55.696546] [IGT] xe_module_load: exiting, ret=0 <7>[ 55.707491] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.707880] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.708122] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 56.666693] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.666750] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.667013] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.699636] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 58.141155] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turning VDD off <7>[ 58.141807] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067