<5>[ 0.000000] Linux version 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Tue Jan 20 00:59:17 UTC 2026 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x69916018 ESRT=0x68ff8518 MOKvar=0x6ccfb000 <6>[ 0.000000] efi: Remove mem259: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem261: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.8 present. <6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D99.2508051732 08/05/2025 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3100.000 MHz processor <6>[ 0.000000] tsc: Detected 3110.400 MHz TSC <7>[ 0.000010] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000012] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000015] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000019] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs <6>[ 0.000021] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000375] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000376] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.004887] esrt: Reserving ESRT space from 0x0000000068ff8518 to 0x0000000068ff8668. <7>[ 0.004895] e820: update [mem 0x68ff8000-0x68ff8fff] usable ==> reserved <6>[ 0.004913] Using GB pages for direct mapping <6>[ 0.005541] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005541] printk: early log buf free: 258784(98%) <6>[ 0.005542] Secure boot disabled <6>[ 0.005543] ACPI: Early table checksum verification disabled <6>[ 0.005547] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.005549] ACPI: XSDT 0x000000006FF70228 000194 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005553] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013) <6>[ 0.005556] ACPI: DSDT 0x000000006FFB6000 02555F (v02 INTEL LNL 00000002 01000013) <6>[ 0.005557] ACPI: FACS 0x000000006FEF1000 000040 <6>[ 0.005559] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005560] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005562] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005563] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005564] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005566] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005567] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005568] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005571] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005572] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005573] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000) <6>[ 0.005575] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005576] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005577] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930) <6>[ 0.005579] ACPI: SSDT 0x000000006FFDD000 009176 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005580] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005581] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930) <6>[ 0.005583] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005584] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005585] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005587] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005588] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013) <6>[ 0.005589] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013) <6>[ 0.005590] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930) <6>[ 0.005592] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005593] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930) <6>[ 0.005594] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930) <6>[ 0.005596] ACPI: LPIT 0x000000006FF85000 0000CC (v01 INTEL LNL 00000002 01000013) <6>[ 0.005597] ACPI: SSDT 0x000000006FF84000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005598] ACPI: SSDT 0x000000006FF83000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005600] ACPI: DBGP 0x000000006FF82000 000034 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005601] ACPI: DBG2 0x000000006FF81000 000054 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005602] ACPI: NHLT 0x000000006FF80000 0002E3 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005603] ACPI: SSDT 0x000000006FF7E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005605] ACPI: SSDT 0x000000006FF77000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005606] ACPI: ECDT 0x000000006FF76000 000069 (v01 LNL 00000002 01000013) <6>[ 0.005607] ACPI: DMAR 0x000000006FF75000 0000D8 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005609] ACPI: FPDT 0x000000006FF74000 000044 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005610] ACPI: SSDT 0x000000006FF73000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930) <6>[ 0.005611] ACPI: SSDT 0x000000006FF71000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005613] ACPI: SSDT 0x000000006FF6D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005614] ACPI: SDEV 0x000000006FFA8000 000046 (v01 00000000 00000000) <6>[ 0.005615] ACPI: SSDT 0x000000006FF62000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930) <6>[ 0.005617] ACPI: PHAT 0x000000006FF61000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D) <6>[ 0.005618] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005619] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113] <6>[ 0.005620] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb55e] <6>[ 0.005620] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f] <6>[ 0.005621] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387] <6>[ 0.005621] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9] <6>[ 0.005621] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa] <6>[ 0.005622] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.005622] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.005622] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.005622] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.005623] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.005623] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.005623] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6] <6>[ 0.005624] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f] <6>[ 0.005624] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1] <6>[ 0.005624] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f] <6>[ 0.005624] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4] <6>[ 0.005625] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6175] <6>[ 0.005625] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df] <6>[ 0.005625] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2] <6>[ 0.005626] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e] <6>[ 0.005626] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955] <6>[ 0.005626] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037] <6>[ 0.005626] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027] <6>[ 0.005627] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7] <6>[ 0.005627] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b] <6>[ 0.005627] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2] <6>[ 0.005628] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320] <6>[ 0.005628] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469] <6>[ 0.005628] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815] <6>[ 0.005629] ACPI: Reserving LPIT table memory at [mem 0x6ff85000-0x6ff850cb] <6>[ 0.005629] ACPI: Reserving SSDT table memory at [mem 0x6ff84000-0x6ff84d5b] <6>[ 0.005629] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff831ef] <6>[ 0.005630] ACPI: Reserving DBGP table memory at [mem 0x6ff82000-0x6ff82033] <6>[ 0.005630] ACPI: Reserving DBG2 table memory at [mem 0x6ff81000-0x6ff81053] <6>[ 0.005630] ACPI: Reserving NHLT table memory at [mem 0x6ff80000-0x6ff802e2] <6>[ 0.005630] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff7f15b] <6>[ 0.005631] ACPI: Reserving SSDT table memory at [mem 0x6ff77000-0x6ff7d53a] <6>[ 0.005631] ACPI: Reserving ECDT table memory at [mem 0x6ff76000-0x6ff76068] <6>[ 0.005631] ACPI: Reserving DMAR table memory at [mem 0x6ff75000-0x6ff750d7] <6>[ 0.005632] ACPI: Reserving FPDT table memory at [mem 0x6ff74000-0x6ff74043] <6>[ 0.005632] ACPI: Reserving SSDT table memory at [mem 0x6ff73000-0x6ff7386c] <6>[ 0.005632] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff723da] <6>[ 0.005633] ACPI: Reserving SSDT table memory at [mem 0x6ff6d000-0x6ff6f462] <6>[ 0.005633] ACPI: Reserving SDEV table memory at [mem 0x6ffa8000-0x6ffa8045] <6>[ 0.005633] ACPI: Reserving SSDT table memory at [mem 0x6ff62000-0x6ff6c4f9] <6>[ 0.005634] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff617bf] <6>[ 0.005634] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037] <6>[ 0.005705] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.005905] No NUMA configuration found <6>[ 0.005905] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff] <6>[ 0.005911] NODE_DATA(0) allocated [mem 0x87f352e40-0x87f37dfff] <6>[ 0.006024] Zone ranges: <6>[ 0.006025] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006026] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006027] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.006027] Device empty <6>[ 0.006028] Movable zone start for each node <6>[ 0.006029] Early memory node ranges <6>[ 0.006029] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006029] node 0: [mem 0x0000000000100000-0x000000006cac0fff] <6>[ 0.006030] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.006030] node 0: [mem 0x0000000104500000-0x000000087f7fffff] <6>[ 0.006032] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.006036] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006051] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.007641] On node 0, zone DMA32: 13630 pages in unavailable ranges <6>[ 0.035498] On node 0, zone Normal: 17664 pages in unavailable ranges <6>[ 0.035506] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.035991] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.035997] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.036049] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.036051] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.036052] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.036054] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.036055] ACPI: HPET id: 0x8086a701 base: 0xfed00000 <7>[ 0.036066] e820: update [mem 0x6992d000-0x69947fff] usable ==> reserved <6>[ 0.036072] TSC deadline timer available <6>[ 0.036074] CPU topo: Max. logical packages: 1 <6>[ 0.036075] CPU topo: Max. logical dies: 1 <6>[ 0.036075] CPU topo: Max. dies per package: 1 <6>[ 0.036076] CPU topo: Max. threads per core: 1 <6>[ 0.036077] CPU topo: Num. cores per package: 8 <6>[ 0.036077] CPU topo: Num. threads per package: 8 <6>[ 0.036077] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs <6>[ 0.036091] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.036092] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.036093] PM: hibernation: Registered nosave memory: [mem 0x68ff8000-0x68ff8fff] <6>[ 0.036094] PM: hibernation: Registered nosave memory: [mem 0x6992d000-0x69947fff] <6>[ 0.036095] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fffefff] <6>[ 0.036095] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x1044fffff] <6>[ 0.036097] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.036098] Booting paravirtualized kernel on bare hardware <6>[ 0.036099] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.036108] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 <6>[ 0.036443] percpu: Embedded 87 pages/cpu s233472 r8192 d114688 u524288 <7>[ 0.036447] pcpu-alloc: s233472 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.036449] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 <5>[ 0.036463] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.036558] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.036574] random: crng init done <6>[ 0.038421] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.039342] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.039403] software IO TLB: area num 8. <6>[ 0.046786] Fallback order for Node 0: 0 <6>[ 0.046789] Built 1 zonelists, mobility grouping on. Total pages: 8289632 <6>[ 0.046789] Policy zone: Normal <6>[ 0.046799] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.046799] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.046802] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.047729] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.079433] ********************************************************** <4>[ 0.079435] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.079435] ** ** <4>[ 0.079435] ** This system shows unhashed kernel memory addresses ** <4>[ 0.079435] ** via the console, logs, and other interfaces. This ** <4>[ 0.079435] ** might reduce the security of your system. ** <4>[ 0.079436] ** ** <4>[ 0.079436] ** If you see this message and you are not debugging ** <4>[ 0.079436] ** the kernel, report this immediately to your system ** <4>[ 0.079436] ** administrator! ** <4>[ 0.079436] ** ** <4>[ 0.079437] ** Use hash_pointers=always to force this mode off ** <4>[ 0.079437] ** ** <4>[ 0.079437] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.079437] ********************************************************** <6>[ 0.080528] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 0.088881] ftrace: allocating 61070 entries in 240 pages <6>[ 0.088882] ftrace: allocated 240 pages with 4 groups <6>[ 0.090306] Dynamic Preempt: voluntary <6>[ 0.090802] Running RCU self tests <6>[ 0.090802] Running RCU synchronous self tests <6>[ 0.090803] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.090803] rcu: RCU lockdep checking is enabled. <6>[ 0.090804] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. <6>[ 0.090804] Trampoline variant of Tasks RCU enabled. <6>[ 0.090804] Rude variant of Tasks RCU enabled. <6>[ 0.090805] Tracing variant of Tasks RCU enabled. <6>[ 0.090805] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.090806] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 <6>[ 0.090871] Running RCU synchronous self tests <6>[ 0.090874] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.090877] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.090880] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.101479] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 <6>[ 0.101946] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.102354] Console: colour dummy device 80x25 <6>[ 0.102363] printk: legacy console [tty0] enabled <6>[ 0.103498] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.103505] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.103509] ... MAX_LOCK_DEPTH: 48 <6>[ 0.103512] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.103516] ... CLASSHASH_SIZE: 4096 <6>[ 0.103520] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.103523] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.103527] ... CHAINHASH_SIZE: 262144 <6>[ 0.103531] memory used by lock dependency info: 54145 kB <6>[ 0.103535] memory used for stack traces: 4224 kB <6>[ 0.103539] per task-struct memory footprint: 1920 bytes <6>[ 0.103588] ACPI: Core revision 20250807 <6>[ 0.104442] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.104506] APIC: Switch to symmetric I/O mode setup <6>[ 0.104511] DMAR: Host address width 38 <6>[ 0.104515] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.104545] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.104578] DMAR: DRHD base: 0x000000fc810000 flags: 0x0 <6>[ 0.104597] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.104621] DMAR: DRHD base: 0x000000fc820000 flags: 0x1 <6>[ 0.104644] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda <6>[ 0.104677] DMAR: SATC flags: 0x1 <6>[ 0.104687] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2 <6>[ 0.104692] DMAR-IR: HPET id 0 under DRHD base 0xfc820000 <6>[ 0.104696] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.106732] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.111951] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 0.111970] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400) <6>[ 0.112050] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.112057] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.112235] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.112239] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.112249] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.112260] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.112267] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.112272] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.112277] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.112286] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.112303] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.112310] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.112316] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.112321] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.112328] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.112334] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.112342] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.112348] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.112353] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.112359] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.112365] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.112964] Freeing SMP alternatives memory: 56K <6>[ 0.112964] pid_max: default: 32768 minimum: 301 <6>[ 0.112964] landlock: Up and running. <6>[ 0.112964] Yama: becoming mindful. <6>[ 0.112964] AppArmor: AppArmor initialized <6>[ 0.112964] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.112964] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.112964] Running RCU synchronous self tests <6>[ 0.112964] Running RCU synchronous self tests <6>[ 0.112964] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1) <6>[ 0.112964] Performance Events: XSAVE Architectural LBR, PEBS fmt6+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.112964] core: cpu_core PMU driver: <6>[ 0.112964] ... version: 6 <6>[ 0.112964] ... bit width: 48 <6>[ 0.112969] ... generic counters: 10 <6>[ 0.112973] ... generic bitmap: 00000000000003ff <6>[ 0.112977] ... fixed-purpose counters: 4 <6>[ 0.112981] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.112985] ... value mask: 0000ffffffffffff <6>[ 0.112990] ... max period: 00007fffffffffff <6>[ 0.112994] ... global_ctrl mask: 0001000f000003ff <6>[ 0.113069] signal: max sigframe size: 3632 <6>[ 0.113094] Estimated ratio of average max frequency by base frequency (times 1024): 1189 <6>[ 0.113187] rcu: Hierarchical SRCU implementation. <6>[ 0.113191] rcu: Max phase no-delay instances is 400. <6>[ 0.113339] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.115155] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.115419] smp: Bringing up secondary CPUs ... <6>[ 0.115759] smpboot: x86: Booting SMP configuration: <6>[ 0.115766] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 <6>[ 0.010834] core: The event 0x5d0 is not supported as an auto-counter reload event. <6>[ 0.010834] core: cpu_atom PMU driver: <6>[ 0.010834] ... version: 6 <6>[ 0.010834] ... bit width: 48 <6>[ 0.010834] ... generic counters: 8 <6>[ 0.010834] ... generic bitmap: 00000000000000ff <6>[ 0.010834] ... fixed-purpose counters: 6 <6>[ 0.010834] ... fixed-purpose bitmap: 0000000000000077 <6>[ 0.010834] ... value mask: 0000ffffffffffff <6>[ 0.010834] ... max period: 00007fffffffffff <6>[ 0.010834] ... global_ctrl mask: 00000077000000ff <6>[ 0.125081] smp: Brought up 1 node, 8 CPUs <6>[ 0.125599] smpboot: Total of 8 processors activated (49766.40 BogoMIPS) <6>[ 0.127175] Memory: 32357588K/33158528K available (25570K kernel code, 5608K rwdata, 9672K rodata, 5724K init, 68176K bss, 777220K reserved, 0K cma-reserved) <6>[ 0.127585] devtmpfs: initialized <6>[ 0.128213] x86/mm: Memory block size: 128MB <6>[ 0.149090] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes) <6>[ 0.149582] Running RCU synchronous self tests <6>[ 0.149595] Running RCU synchronous self tests <6>[ 0.150996] Running RCU Tasks wait API self tests <6>[ 0.151131] Running RCU Tasks Rude wait API self tests <6>[ 0.151131] Running RCU Tasks Trace wait API self tests <6>[ 0.164027] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.164313] posixtimers hash table entries: 4096 (order: 7, 294912 bytes, linear) <6>[ 0.164391] futex hash table entries: 2048 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear). <6>[ 0.165767] PM: RTC time: 03:14:42, date: 2026-01-20 <6>[ 0.166503] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.167501] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.167806] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.168090] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.168145] audit: initializing netlink subsys (disabled) <5>[ 0.168237] audit: type=2000 audit(1768878882.056:1): state=initialized audit_enabled=0 res=1 <6>[ 0.169251] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.169253] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.169258] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.169263] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.169267] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.169303] cpuidle: using governor ladder <6>[ 0.169303] cpuidle: using governor menu <6>[ 0.169303] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.170961] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.171279] PCI: Using configuration type 1 for base access <6>[ 0.171977] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.173482] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.173482] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.173482] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.173482] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.178024] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.178033] raid6: using avx2x2 recovery algorithm <6>[ 0.178657] fbcon: Taking over console <6>[ 0.178800] ACPI: Added _OSI(Module Device) <6>[ 0.178801] ACPI: Added _OSI(Processor Device) <6>[ 0.178802] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.183000] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.785564] ACPI: 31 ACPI AML tables successfully acquired and loaded <6>[ 0.798603] ACPI: EC: EC started <6>[ 0.798614] ACPI: EC: interrupt blocked <6>[ 0.805522] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.805546] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 0.897984] Callback from call_rcu_tasks() invoked. <6>[ 1.093820] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.093848] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.178399] ACPI: Interpreter enabled <6>[ 1.178656] ACPI: PM: (supports S0 S4 S5) <6>[ 1.178668] ACPI: Using IOAPIC for interrupt routing <6>[ 1.194752] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.194773] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.255075] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.255153] ACPI: Enabled 13 GPEs in block 80 to DF <6>[ 1.374752] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource <6>[ 1.375589] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource <6>[ 1.384521] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.868377] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 1.882334] ACPI: \_SB_.PC00.RP02.PXP_: New power resource <6>[ 2.043085] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource <6>[ 2.044696] ACPI: \_SB_.PC00.RP04.PXP_: New power resource <6>[ 2.052790] ACPI: \_SB_.PC00.RP05.PXP_: New power resource <6>[ 2.063650] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 2.063925] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 2.064186] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.333588] ACPI: \_TZ_.FN00: New power resource <6>[ 2.334802] ACPI: \_TZ_.FN01: New power resource <6>[ 2.336468] ACPI: \_TZ_.FN02: New power resource <6>[ 2.337536] ACPI: \_TZ_.FN03: New power resource <6>[ 2.338490] ACPI: \_TZ_.FN04: New power resource <6>[ 2.340855] ACPI: \PIN_: New power resource <6>[ 2.344502] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.344517] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.347905] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 2.357093] PCI host bridge to bus 0000:00 <6>[ 2.357125] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.357132] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.357139] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.357146] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 2.357153] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window] <6>[ 2.357161] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.360416] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.361063] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.361154] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref] <6>[ 2.361163] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref] <6>[ 2.361172] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref] <6>[ 2.361216] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.362518] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.362547] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit] <6>[ 2.364069] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.364099] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit] <6>[ 2.364107] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit] <6>[ 2.368351] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port <6>[ 2.368448] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.368477] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 2.368516] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 2.368727] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.368878] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.381471] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port <6>[ 2.381553] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.381578] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 2.381615] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 2.381819] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold <6>[ 2.381939] pci 0000:00:07.1: PTM enabled (root), 4ns granularity <6>[ 2.393495] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port <6>[ 2.393586] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.393615] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 2.393658] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 2.393975] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold <6>[ 2.394313] pci 0000:00:07.2: PTM enabled (root), 4ns granularity <6>[ 2.407968] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.408013] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit] <6>[ 2.408031] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.408344] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.408381] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit] <6>[ 2.408391] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit] <6>[ 2.409058] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.409126] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit] <6>[ 2.409217] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.412181] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.412255] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit] <6>[ 2.412267] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit] <6>[ 2.412354] pci 0000:00:0d.2: supports D1 D2 <6>[ 2.412360] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.414235] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.414295] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit] <6>[ 2.414305] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit] <6>[ 2.414372] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.414377] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.415876] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.415934] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit] <6>[ 2.416026] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.418705] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.418802] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit] <6>[ 2.418908] pci 0000:00:13.0: PME# supported from D3hot <6>[ 2.419382] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.419435] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit] <6>[ 2.419503] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.421429] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.421493] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit] <6>[ 2.421502] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit] <6>[ 2.421840] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.421938] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.433825] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.433904] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.446777] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.446987] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.459793] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.460004] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.473491] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.473637] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit] <6>[ 2.473796] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.479110] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port <6>[ 2.479161] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.479173] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 2.479185] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 2.479356] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 2.479454] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity <6>[ 2.485205] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port <6>[ 2.485311] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.485342] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 2.485683] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <6>[ 2.485886] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity <6>[ 2.490662] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.492454] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.492569] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit] <6>[ 2.492584] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit] <6>[ 2.492700] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.493182] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.493251] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit] <6>[ 2.493263] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.494470] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.494653] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.495082] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.495258] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.495421] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.495613] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint <6>[ 2.495685] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff] <6>[ 2.495696] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit] <6>[ 2.495705] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit] <6>[ 2.495869] pci 0000:7f:00.0: supports D1 D2 <6>[ 2.495873] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.496737] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.498046] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.498480] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint <6>[ 2.498538] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit] <6>[ 2.499756] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.499823] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.912242] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 2.912271] Low-power S0 idle used by default for system suspend <6>[ 2.996481] ACPI: EC: interrupt unblocked <6>[ 2.996502] ACPI: EC: event unblocked <6>[ 2.996540] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 2.996551] ACPI: EC: GPE=0x6e <6>[ 2.996560] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 2.996575] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 2.998228] iommu: Default domain type: Translated <6>[ 2.998228] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 3.003873] SCSI subsystem initialized <7>[ 3.004226] libata version 3.00 loaded. <6>[ 3.004262] ACPI: bus type USB registered <6>[ 3.005035] usbcore: registered new interface driver usbfs <6>[ 3.005120] usbcore: registered new interface driver hub <6>[ 3.005190] usbcore: registered new device driver usb <6>[ 3.005421] pps_core: LinuxPPS API ver. 1 registered <6>[ 3.005428] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 3.005461] PTP clock support registered <6>[ 3.006043] EDAC MC: Ver: 3.0.0 <6>[ 3.009119] efivars: Registered efivars operations <6>[ 3.012710] NetLabel: Initializing <6>[ 3.012719] NetLabel: domain hash size = 128 <6>[ 3.012726] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 3.012833] NetLabel: unlabeled traffic allowed by default <6>[ 3.012858] mctp: management component transport protocol core <6>[ 3.012866] NET: Registered PF_MCTP protocol family <6>[ 3.012948] PCI: Using ACPI for IRQ routing <7>[ 3.029593] PCI: pci_cache_line_size set to 64 bytes <6>[ 3.029853] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 3.029960] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 3.029978] e820: reserve RAM buffer [mem 0x68ff8000-0x6bffffff] <7>[ 3.029983] e820: reserve RAM buffer [mem 0x6992d000-0x6bffffff] <7>[ 3.029987] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff] <7>[ 3.029991] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 3.030463] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 3.030463] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 3.030463] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 3.030463] vgaarb: loaded <7>[ 3.033166] Monitor-Mwait will be used to enter C-1 state <7>[ 3.033190] Monitor-Mwait will be used to enter C-2 state <7>[ 3.033190] Monitor-Mwait will be used to enter C-3 state <6>[ 3.044801] clocksource: Switched to clocksource tsc-early <5>[ 3.051513] VFS: Disk quotas dquot_6.6.0 <6>[ 3.051558] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 3.053554] AppArmor: AppArmor Filesystem Enabled <6>[ 3.053905] pnp: PnP ACPI init <6>[ 3.055365] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 3.055385] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 3.057395] system 00:02: [io 0x06a4] has been reserved <6>[ 3.057410] system 00:02: [io 0x06a0] has been reserved <6>[ 3.087635] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 3.087658] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved <6>[ 3.087680] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 3.087693] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 3.087706] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved <6>[ 3.087722] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 3.087738] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 3.087751] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 3.092030] system 00:04: [io 0x2000-0x20fe] has been reserved <6>[ 3.096662] system 00:06: [io 0x1854-0x1857] has been reserved <6>[ 3.097873] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 3.104771] pnp: PnP ACPI: found 8 devices <6>[ 3.121293] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 3.121672] NET: Registered PF_INET protocol family <6>[ 3.122040] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.126061] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 3.126389] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 3.126679] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.127957] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 3.130112] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 3.130699] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.132053] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.133437] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 3.133527] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000 <6>[ 3.133544] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000 <6>[ 3.133557] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000 <6>[ 3.133618] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 3.133627] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned <6>[ 3.133636] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned <6>[ 3.133646] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned <6>[ 3.133674] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned <6>[ 3.133699] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned <6>[ 3.133724] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned <6>[ 3.133746] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned <6>[ 3.133788] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 3.133802] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 3.133815] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 3.133826] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 3.133884] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 3.133892] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff] <6>[ 3.133904] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 3.133915] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 3.133930] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 3.133939] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff] <6>[ 3.133950] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 3.133961] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 3.133977] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 3.133985] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 3.133996] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 3.134010] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 3.134046] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 3.134090] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 3.134098] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 3.134106] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 3.134115] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 3.134123] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window] <6>[ 3.134133] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] <6>[ 3.134140] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff] <6>[ 3.134148] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 3.134158] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff] <6>[ 3.134165] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 3.134173] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 3.134183] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff] <6>[ 3.134190] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 3.134198] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 3.134208] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff] <6>[ 3.134215] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff] <6>[ 3.134223] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff] <6>[ 3.135526] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 3.137586] PCI: CLS 0 bytes, default 64 <6>[ 3.137721] DMAR: No RMRR found <6>[ 3.137736] DMAR: No ATSR found <6>[ 3.137741] DMAR: dmar1: Using Queued invalidation <6>[ 3.137750] DMAR: dmar0: Using Queued invalidation <6>[ 3.137758] DMAR: dmar2: Using Queued invalidation <6>[ 3.138918] pci 0000:00:04.0: Adding to iommu group 0 <6>[ 3.139025] pci 0000:00:05.0: Adding to iommu group 1 <6>[ 3.139125] pci 0000:00:0a.0: Adding to iommu group 2 <6>[ 3.139211] pci 0000:00:0b.0: Adding to iommu group 3 <6>[ 3.143508] pci 0000:00:02.0: Adding to iommu group 4 <6>[ 3.146122] pci 0000:00:00.0: Adding to iommu group 5 <6>[ 3.146229] pci 0000:00:07.0: Adding to iommu group 6 <6>[ 3.146323] pci 0000:00:07.1: Adding to iommu group 7 <6>[ 3.146415] pci 0000:00:07.2: Adding to iommu group 8 <6>[ 3.146529] pci 0000:00:0d.0: Adding to iommu group 9 <6>[ 3.146591] pci 0000:00:0d.2: Adding to iommu group 9 <6>[ 3.146650] pci 0000:00:0d.3: Adding to iommu group 9 <6>[ 3.146751] pci 0000:00:12.0: Adding to iommu group 10 <6>[ 3.146849] pci 0000:00:13.0: Adding to iommu group 11 <6>[ 3.146952] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 3.147011] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 3.147135] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 3.147198] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 3.147262] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 3.147322] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 3.147417] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 3.147507] pci 0000:00:1c.0: Adding to iommu group 15 <6>[ 3.147620] pci 0000:00:1c.4: Adding to iommu group 16 <6>[ 3.147740] pci 0000:00:1f.0: Adding to iommu group 17 <6>[ 3.147804] pci 0000:00:1f.3: Adding to iommu group 17 <6>[ 3.147870] pci 0000:00:1f.4: Adding to iommu group 17 <6>[ 3.147935] pci 0000:00:1f.5: Adding to iommu group 17 <6>[ 3.148022] pci 0000:7f:00.0: Adding to iommu group 18 <6>[ 3.148134] pci 0000:80:00.0: Adding to iommu group 19 <6>[ 3.160687] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 3.160706] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 3.160715] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB) <6>[ 3.166359] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 3.166699] clocksource: Switched to clocksource tsc <6>[ 3.166908] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 3.174639] Initialise system trusted keyrings <5>[ 3.174741] Key type blacklist registered <6>[ 3.175414] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 3.186726] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 3.186894] ntfs3: Enabled Linux POSIX ACLs support <6>[ 3.186901] ntfs3: Read-only LZX/Xpress compression included <5>[ 3.187486] integrity: Platform Keyring initialized <5>[ 3.187513] integrity: Machine keyring initialized <6>[ 3.193976] xor: automatically using best checksumming function avx <5>[ 3.193988] Key type asymmetric registered <5>[ 3.194000] Asymmetric key parser 'x509' registered <6>[ 3.194133] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 3.194683] io scheduler mq-deadline registered <6>[ 3.195781] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.197611] pcieport 0000:00:07.0: PME: Signaling with IRQ 126 <6>[ 3.198221] pcieport 0000:00:07.0: AER: enabled with IRQ 126 <6>[ 3.199532] pcieport 0000:00:07.1: PME: Signaling with IRQ 127 <6>[ 3.200089] pcieport 0000:00:07.1: AER: enabled with IRQ 127 <6>[ 3.201388] pcieport 0000:00:07.2: PME: Signaling with IRQ 128 <6>[ 3.201956] pcieport 0000:00:07.2: AER: enabled with IRQ 128 <6>[ 3.203124] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129 <6>[ 3.203675] pcieport 0000:00:1c.0: AER: enabled with IRQ 129 <6>[ 3.205354] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130 <6>[ 3.205974] pcieport 0000:00:1c.4: AER: enabled with IRQ 130 <6>[ 3.208072] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 3.208309] ACPI: button: Lid Switch [LID0] <6>[ 3.208614] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 3.208834] ACPI: button: Sleep Button [SLPB] <6>[ 3.209113] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 3.209589] ACPI: button: Power Button [PWRB] <6>[ 3.323506] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 3.323533] ACPI: thermal: Thermal Zone [TZ00] (40 C) <6>[ 3.325287] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 3.325971] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 3.327505] ACPI: battery: Slot [BAT0] (battery present) <6>[ 3.349464] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 3.366047] serial 0000:00:12.0: enabling device (0000 -> 0002) <5>[ 3.369214] hpet_acpi_add: no address or irqs in _CRS <6>[ 3.369390] Linux agpgart interface v0.103 <6>[ 3.370167] ACPI: bus type drm_connector registered <7>[ 3.371511] initcall simpledrm_platform_driver_init blacklisted <6>[ 3.392493] loop: module loaded <6>[ 3.442371] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 3.557537] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 3.668503] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 3.779707] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <5>[ 3.893448] Key type psk registered <6>[ 3.897865] nvme 0000:80:00.0: platform quirk: setting simple suspend <6>[ 3.898831] nvme nvme0: pci function 0000:80:00.0 <6>[ 3.899586] tun: Universal TUN/TAP device driver, 1.6 <6>[ 3.900681] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 3.900798] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 3.902741] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 3.905195] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 3.905229] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 3.905251] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 3.905656] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 3.905679] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 3.905690] usb usb1: Product: xHCI Host Controller <6>[ 3.905698] usb usb1: Manufacturer: Linux 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ xhci-hcd <6>[ 3.905710] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 3.906899] hub 1-0:1.0: USB hub found <6>[ 3.906991] hub 1-0:1.0: 1 port detected <6>[ 3.910913] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19 <6>[ 3.910931] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 3.910942] usb usb2: Product: xHCI Host Controller <6>[ 3.910950] usb usb2: Manufacturer: Linux 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ xhci-hcd <6>[ 3.910962] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 3.911773] hub 2-0:1.0: USB hub found <6>[ 3.911817] hub 2-0:1.0: 3 ports detected <6>[ 3.932956] nvme nvme0: 8/0/0 default/read/poll queues <6>[ 3.936661] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 3.936710] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 3.938532] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 3.940868] nvme0n1: p1 p2 <6>[ 3.941015] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 3.941040] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 3.941062] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 3.941320] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 3.941334] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 3.941345] usb usb3: Product: xHCI Host Controller <6>[ 3.941352] usb usb3: Manufacturer: Linux 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ xhci-hcd <6>[ 3.941364] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 3.942214] hub 3-0:1.0: USB hub found <6>[ 3.942272] hub 3-0:1.0: 8 ports detected <6>[ 3.971651] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19 <6>[ 3.971674] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 3.971685] usb usb4: Product: xHCI Host Controller <6>[ 3.971692] usb usb4: Manufacturer: Linux 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ xhci-hcd <6>[ 3.971704] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 3.972555] hub 4-0:1.0: USB hub found <6>[ 3.972607] hub 4-0:1.0: 2 ports detected <6>[ 3.979761] usbcore: registered new interface driver usb-storage <6>[ 3.979999] usbcore: registered new interface driver usbserial_generic <6>[ 3.980121] usbserial: USB Serial support registered for generic <6>[ 3.980203] usbcore: registered new interface driver ftdi_sio <6>[ 3.980248] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 3.980327] usbcore: registered new interface driver pl2303 <6>[ 3.980364] usbserial: USB Serial support registered for pl2303 <6>[ 3.980519] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 3.980530] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 4.692037] i8042: Can't read CTR while initializing i8042 <3>[ 4.692052] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 4.692624] mousedev: PS/2 mouse device common for all mice <6>[ 4.693736] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 4.695711] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 4.695950] rtc_cmos rtc_cmos: setting system clock to 2026-01-20T03:14:47 UTC (1768878887) <6>[ 4.696146] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 4.696205] i2c_dev: i2c /dev entries driver <6>[ 4.701637] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 4.701653] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 4.701665] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 4.701711] device-mapper: uevent: version 1.0.3 <6>[ 4.702066] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 4.702085] intel_pstate: Intel P-state driver initializing <6>[ 4.706392] Hybrid CPU capacity scaling enabled <6>[ 4.706781] processor cpu0: EM: created perf domain <6>[ 4.707063] processor cpu1: EM: created perf domain <6>[ 4.707314] processor cpu2: EM: created perf domain <6>[ 4.707568] processor cpu3: EM: created perf domain <6>[ 4.707820] processor cpu4: EM: created perf domain <6>[ 4.708084] processor cpu5: EM: created perf domain <6>[ 4.708343] processor cpu6: EM: created perf domain <6>[ 4.708593] processor cpu7: EM: created perf domain <6>[ 4.710336] intel_pstate: HWP enabled <6>[ 4.710354] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.710362] sdhci: Copyright(c) Pierre Ossman <6>[ 4.710576] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 4.714606] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c] <6>[ 4.716247] drop_monitor: Initializing network drop monitor service <6>[ 4.716669] NET: Registered PF_INET6 protocol family <6>[ 4.719172] Segment Routing with IPv6 <6>[ 4.719266] In-situ OAM (IOAM) with IPv6 <6>[ 4.719380] NET: Registered PF_PACKET protocol family <5>[ 4.719867] Key type dns_resolver registered <4>[ 4.728510] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 4.729383] microcode: Current revision: 0x00000124 <6>[ 4.730792] IPI shorthand broadcast: enabled <6>[ 4.754398] sched_clock: Marking stable (4744001189, 9834965)->(4814573737, -60737583) <6>[ 4.755261] registered taskstats version 1 <5>[ 4.756572] Loading compiled-in X.509 certificates <6>[ 4.800166] Demotion targets for Node 0: null <6>[ 4.800528] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946) <6>[ 4.800532] kmemleak: Automatic memory scanning thread started <5>[ 4.800790] Key type .fscrypt registered <5>[ 4.800795] Key type fscrypt-provisioning registered <6>[ 4.803969] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 4.807545] Key type encrypted registered <6>[ 4.807555] AppArmor: AppArmor sha256 policy hashing enabled <6>[ 4.807569] ima: No TPM chip found, activating TPM-bypass! <5>[ 4.807586] Loading compiled-in module X.509 certificates <5>[ 4.808371] Loaded X.509 cert 'Build time autogenerated kernel key: a39eba57f2e082a16a6d45bae7767645ea248723' <6>[ 4.808383] ima: Allocated hash algorithm: sha256 <6>[ 4.808425] ima: No architecture policies found <6>[ 4.808519] evm: Initialising EVM extended attributes: <6>[ 4.808523] evm: security.selinux <6>[ 4.808526] evm: security.SMACK64 <6>[ 4.808528] evm: security.SMACK64EXEC <6>[ 4.808531] evm: security.SMACK64TRANSMUTE <6>[ 4.808535] evm: security.SMACK64MMAP <6>[ 4.808538] evm: security.apparmor <6>[ 4.808540] evm: security.ima <6>[ 4.808543] evm: security.capability <6>[ 4.808546] evm: HMAC attrs: 0x1 <6>[ 4.810850] PM: Magic number: 10:953:209 <6>[ 4.810926] acpi device:60: hash matches <6>[ 4.811049] netconsole: network logging started <6>[ 4.811772] RAS: Correctable Errors collector initialized. <6>[ 4.811928] clk: Disabling unused clocks <6>[ 4.811939] PM: genpd: Disabling unused power domains <4>[ 4.812559] check access for rdinit=/init failed: -2, ignoring <6>[ 4.812567] md: Waiting for all devices to be available before autodetect <6>[ 4.812574] md: If you don't use raid, use raid=noautodetect <6>[ 4.812580] md: Autodetecting RAID arrays. <6>[ 4.812922] md: autorun ... <6>[ 4.812927] md: ... autorun DONE. <6>[ 4.858903] EXT4-fs (nvme0n1p2): mounted filesystem ab02bed0-b378-4950-9087-63334df65791 ro with ordered data mode. Quota mode: none. <6>[ 4.858970] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 4.859431] devtmpfs: mounted <6>[ 4.878052] Freeing unused decrypted memory: 2036K <6>[ 4.878977] Freeing unused kernel image (initmem) memory: 5724K <6>[ 4.879006] Write protecting the kernel read-only data: 36864k <6>[ 4.879754] Freeing unused kernel image (text/rodata gap) memory: 1052K <6>[ 4.879979] Freeing unused kernel image (rodata/data gap) memory: 568K <6>[ 4.884436] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 4.900009] Run /sbin/init as init process <7>[ 4.900016] with arguments: <7>[ 4.900017] /sbin/init <7>[ 4.900018] with environment: <7>[ 4.900019] HOME=/ <7>[ 4.900019] TERM=linux <7>[ 4.943305] systemd[1]: Inserted module 'autofs4' <7>[ 4.977438] systemd[1]: systemd 255.4-1ubuntu8.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 4.977528] systemd[1]: Detected architecture x86-64. <7>[ 4.979976] systemd[1]: Hostname set to . <7>[ 5.218909] systemd[1]: Queued start job for default target graphical.target. <7>[ 5.243301] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 5.245076] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 5.246582] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 5.246810] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 5.247462] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 5.247569] systemd[1]: Expecting device dev-disk-by\x2duuid-BBB3\x2d0D61.device - /dev/disk/by-uuid/BBB3-0D61... <7>[ 5.247646] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 5.247726] systemd[1]: Reached target slices.target - Slice Units. <7>[ 5.247788] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 5.247856] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 5.247931] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 5.248166] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 5.248520] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 5.248783] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 5.249106] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 5.249351] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 5.249546] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 5.249822] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 5.250143] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 5.250416] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 5.250584] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.250865] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 5.251113] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 5.254293] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 5.256803] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 5.259425] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 5.262118] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 5.268747] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 5.272314] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 5.275434] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 5.279353] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 5.281962] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 5.285024] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 5.288173] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 5.289399] systemd-journald[205]: Collecting audit messages is disabled. <7>[ 5.291637] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 5.295297] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 5.298411] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 5.303540] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 5.304337] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <7>[ 5.308672] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <6>[ 5.313658] pstore: Using crash dump compression: deflate <7>[ 5.314088] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 5.315894] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.315976] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <6>[ 5.318999] pstore: Registered efi_pstore as persistent store backend <7>[ 5.321393] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <6>[ 5.323861] fuse: init (API version 7.45) <7>[ 5.328180] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 5.460060] EXT4-fs (nvme0n1p2): re-mounted ab02bed0-b378-4950-9087-63334df65791 r/w. <6>[ 5.491730] Adding 8388604k swap on /swap.img. Priority:-1 extents:65 across:341704704k SS <7>[ 5.505474] systemd-journald[205]: Received client request to flush runtime journal. <7>[ 5.519249] systemd-journald[205]: /var/log/journal/b767726c6704475694a1e926e667900b/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 5.519265] systemd-journald[205]: Rotating system journal. <4>[ 6.181582] nvme nvme0: using unchecked data buffer <6>[ 6.366645] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 6.386146] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 6.422952] input: Intel HID events as /devices/platform/INTC107B:00/input/input3 <6>[ 6.442470] intel-hid INTC107B:00: platform supports 5 button array <6>[ 6.462014] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4 <5>[ 6.482150] audit: type=1400 audit(1768878889.284:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=401 comm="apparmor_parser" <5>[ 6.482433] audit: type=1400 audit(1768878889.284:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=403 comm="apparmor_parser" <5>[ 6.482738] audit: type=1400 audit(1768878889.284:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=400 comm="apparmor_parser" <5>[ 6.484172] audit: type=1400 audit(1768878889.286:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=402 comm="apparmor_parser" <5>[ 6.486802] audit: type=1400 audit(1768878889.288:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=404 comm="apparmor_parser" <5>[ 6.495606] audit: type=1400 audit(1768878889.297:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=408 comm="apparmor_parser" <5>[ 6.495964] audit: type=1400 audit(1768878889.298:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=406 comm="apparmor_parser" <5>[ 6.496459] audit: type=1400 audit(1768878889.298:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=407 comm="apparmor_parser" <5>[ 6.500752] audit: type=1400 audit(1768878889.302:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=409 comm="apparmor_parser" <5>[ 6.503227] audit: type=1400 audit(1768878889.305:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=410 comm="apparmor_parser" <3>[ 6.529172] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121 <3>[ 6.529444] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121 <6>[ 6.563634] pci 0000:00:05.0: Setting to D3hot <6>[ 6.575943] pci 0000:00:0b.0: Setting to D3hot <6>[ 6.588391] intel_pmc_core INT33A1:00: initialized <6>[ 6.916526] ACPI: bus type thunderbolt registered <6>[ 6.926755] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 6.942358] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43 <6>[ 6.942363] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 6.970237] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 6.977163] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 7.008995] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 7.029861] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 7.033569] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 7.059958] r8169 0000:7f:00.0: enabling device (0000 -> 0003) <6>[ 7.080038] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402) <6>[ 7.085844] intel_rapl_common: Found RAPL domain package <6>[ 7.085852] intel_rapl_common: Found RAPL domain dram <6>[ 7.119828] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 7.119842] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 7.119845] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 7.119846] RAPL PMU: hw unit of domain dram 2^-14 Joules <6>[ 7.119847] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 7.154574] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 7.157268] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.217284] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c9:30:ac, XID 541, IRQ 175 <6>[ 7.217291] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] <6>[ 7.220303] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 7.226720] block nvme0n1: No UUID available providing old NGUID <6>[ 7.264522] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0 <6>[ 7.270798] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.384907] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin <6>[ 7.391983] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.411485] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888 <6>[ 7.411490] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716 <6>[ 7.411492] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472 <6>[ 7.788794] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.795675] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.832601] loop0: detected capacity change from 0 to 8 <6>[ 7.853631] intel_rapl_common: Found RAPL domain package <6>[ 7.853637] intel_rapl_common: Found RAPL domain core <6>[ 7.853640] intel_rapl_common: Found RAPL domain dram <6>[ 7.853642] intel_rapl_common: Found RAPL domain psys <6>[ 7.875548] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.913908] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.948967] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 8.035536] spi-nor spi0.0: supply vcc not found, using dummy regulator <6>[ 8.041785] r8169 0000:7f:00.0 enp127s0: renamed from eth0 <5>[ 8.053906] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 8.053932] 0x000000000000-0x000002000000 : "BIOS" <6>[ 8.092093] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.154995] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC) <6>[ 8.247881] Consider using thermal netlink events interface <6>[ 8.314147] r8169 0000:7f:00.0 enp127s0: Link is Down <6>[ 8.410692] hid: raw HID events driver (C) Jiri Kosina <6>[ 8.417107] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 8.452823] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.456956] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.457779] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.458454] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.460183] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.460268] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.461579] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.462191] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.463143] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 8.463984] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 8.465119] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.468695] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.470454] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.473802] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.475436] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.478588] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.480410] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.483820] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.484152] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.486856] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.488519] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 8.491603] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.491797] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 8.494495] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.564725] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.569955] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.574674] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.578833] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.582939] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.586702] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.591400] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.596650] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.600794] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.604911] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.607824] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.611445] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.616526] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.620206] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.624268] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.629253] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.633217] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.637356] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.642345] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.646595] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.678413] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 10.226180] typec port0: bound usb3-port1 (ops connector_ops) <6>[ 10.226212] typec port0: bound usb2-port1 (ops connector_ops) <6>[ 10.226250] typec port0: bound usb4_port1 (ops connector_ops [thunderbolt]) <6>[ 11.238238] typec port1: bound usb3-port2 (ops connector_ops) <6>[ 11.238308] typec port1: bound usb2-port2 (ops connector_ops) <6>[ 11.238334] typec port1: bound usb4_port3 (ops connector_ops [thunderbolt]) <6>[ 11.960157] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off <6>[ 19.027680] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 19.031016] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 19.839578] systemd-journald[205]: /var/log/journal/b767726c6704475694a1e926e667900b/user-1000.journal: Journal file uses a different sequence number ID, rotating. <6>[ 20.509769] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <7>[ 46.678192] systemd-journald[205]: Time jumped backwards, rotating. <7>[ 54.586780] [IGT] xe_module_load: executing <4>[ 54.586827] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 54.594724] [IGT] xe_module_load: starting subtest load <5>[ 54.880793] Setting dangerous option force_probe - tainting kernel <6>[ 54.883891] xe 0000:00:02.0: vgaarb: deactivate vga console <6>[ 54.885612] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7>[ 54.885621] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7>[ 54.885730] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7>[ 54.885829] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7>[ 54.887879] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7>[ 54.888112] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7>[ 54.888235] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 54.888360] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7>[ 54.888475] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7>[ 54.888574] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7>[ 54.888671] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7>[ 54.888770] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7>[ 54.888880] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7>[ 54.889005] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 54.889132] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7>[ 54.889265] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7>[ 54.889372] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7>[ 54.889475] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7>[ 54.889592] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7>[ 54.889712] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7>[ 54.889833] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7>[ 54.889990] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7>[ 54.890129] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7>[ 54.890266] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7>[ 54.890380] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 54.890483] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 54.890581] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7>[ 54.890678] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 54.890772] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 54.890872] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 54.890993] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7>[ 54.891111] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 54.891219] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 54.891308] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 54.891398] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7>[ 54.891487] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 54.891575] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 54.891663] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 54.891749] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7>[ 54.891835] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 54.891954] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 54.892066] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 54.892177] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7>[ 54.892287] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 54.892381] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 54.892464] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 54.892555] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7>[ 54.892975] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7>[ 54.893164] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7>[ 54.893293] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7>[ 54.893420] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7>[ 54.893548] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7>[ 54.893668] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7>[ 54.893784] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7>[ 54.893992] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7>[ 54.894141] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7>[ 54.894276] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7>[ 54.894392] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7>[ 54.894509] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7>[ 54.894619] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7>[ 54.894727] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7>[ 54.894837] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7>[ 54.894982] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 54.895104] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7>[ 54.895228] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7>[ 54.895343] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 54.895439] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 54.895533] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 54.895637] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7>[ 54.895741] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 54.895849] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 54.895965] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 54.896084] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 54.896203] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7>[ 54.896323] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 54.896472] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7>[ 54.896606] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 54.896889] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7>[ 54.897107] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7>[ 54.897269] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7>[ 54.897383] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 54.897492] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 54.897628] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <6>[ 54.897734] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem <7>[ 54.897750] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7>[ 54.897875] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7>[ 54.898010] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7>[ 54.898142] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7>[ 54.898370] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7>[ 54.898788] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7>[ 54.899793] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7>[ 54.899962] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7>[ 54.900085] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7>[ 54.900189] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7>[ 54.900281] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7>[ 54.900372] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7>[ 54.900459] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7>[ 54.900547] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7>[ 54.900633] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7>[ 54.900720] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7>[ 54.900806] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7>[ 54.900907] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7>[ 54.901010] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7>[ 54.901113] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7>[ 54.902850] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7>[ 54.903000] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 54.903142] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 54.903257] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7>[ 54.903369] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7>[ 54.903469] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7>[ 54.903572] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7>[ 54.903675] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7>[ 54.903777] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 54.903939] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7>[ 54.904106] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 54.904289] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7>[ 54.904470] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 54.904650] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7>[ 54.904837] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7>[ 54.905078] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7>[ 54.905322] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 54.905559] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7>[ 54.905791] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 54.906035] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7>[ 54.906254] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 54.906472] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7>[ 54.906942] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7>[ 54.907165] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7>[ 54.907381] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 54.907597] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7>[ 54.907628] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available. <7>[ 54.907828] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 54.908118] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7>[ 54.908374] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 54.908597] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7>[ 54.916091] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 54.916375] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7>[ 54.916642] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7>[ 54.917127] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:387:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 54.917469] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:387:DDI A/PHY A] <7>[ 54.917836] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7>[ 54.918123] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7>[ 54.918365] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7>[ 54.918618] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 54.918883] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7>[ 54.919122] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 54.919354] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7>[ 54.919580] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <6>[ 54.919906] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7>[ 54.919804] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 54.920088] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:387:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 54.920368] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 54.920584] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 54.920792] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 54.921039] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 54.921157] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 54.921307] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 54.921487] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 54.922866] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turning VDD on <7>[ 54.923055] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 54.924646] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 54.924949] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7>[ 54.925419] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7>[ 54.926455] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7>[ 54.926915] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7>[ 54.928666] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 54.938628] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 54.938642] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.938645] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.938646] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 54.938650] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 54.938653] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.938655] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD monitor <5>[ 54.938661] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.938662] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD size 20, SAD count 0 <5>[ 54.938665] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.938715] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.938717] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.938719] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.938737] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:388:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.938965] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:388:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.939367] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:388:eDP-1] Performing OUI wait (0 ms) <7>[ 54.939781] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:388:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 54.939990] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:388:eDP-1] DRRS type: seamless <7>[ 54.940151] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:388:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 54.940301] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:388:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 54.940492] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 54.940610] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 54.940719] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 54.940814] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 54.940938] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 54.941086] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 54.941330] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:396:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 54.941508] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 54.941638] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:396:DDI TC1/PHY TC1] <7>[ 54.942029] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:408:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 54.942195] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 54.942320] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:408:DDI TC2/PHY TC2] <7>[ 54.942559] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:416:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 54.942690] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 54.942836] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:416:DDI TC3/PHY TC3] <7>[ 54.943441] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:148:pipe A] hw state readout: enabled <7>[ 54.943560] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:266:pipe B] hw state readout: disabled <7>[ 54.943675] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:384:pipe C] hw state readout: disabled <7>[ 54.943765] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: enabled, pipe A <7>[ 54.943861] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7>[ 54.943973] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7>[ 54.944070] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7>[ 54.944165] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7>[ 54.944253] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7>[ 54.944340] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] hw state readout: disabled, pipe B <7>[ 54.944426] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] hw state readout: disabled, pipe B <7>[ 54.944514] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] hw state readout: disabled, pipe B <7>[ 54.944601] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] hw state readout: disabled, pipe B <7>[ 54.944687] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] hw state readout: disabled, pipe B <7>[ 54.944771] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] hw state readout: disabled, pipe B <7>[ 54.944858] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] hw state readout: disabled, pipe C <7>[ 54.944962] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] hw state readout: disabled, pipe C <7>[ 54.945064] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] hw state readout: disabled, pipe C <7>[ 54.945164] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] hw state readout: disabled, pipe C <7>[ 54.945245] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] hw state readout: disabled, pipe C <7>[ 54.945321] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] hw state readout: disabled, pipe C <7>[ 54.946099] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 54.946227] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:387:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 54.946314] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 54.946395] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:396:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 54.946469] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:398:DP-MST A] hw state readout: disabled, pipe A <7>[ 54.946543] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DP-MST B] hw state readout: disabled, pipe B <7>[ 54.946621] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:400:DP-MST C] hw state readout: disabled, pipe C <7>[ 54.946701] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 54.946783] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:408:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 54.946874] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:410:DP-MST A] hw state readout: disabled, pipe A <7>[ 54.946974] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DP-MST B] hw state readout: disabled, pipe B <7>[ 54.947072] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:412:DP-MST C] hw state readout: disabled, pipe C <7>[ 54.947168] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 54.947253] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:416:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 54.947327] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:418:DP-MST A] hw state readout: disabled, pipe A <7>[ 54.947398] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DP-MST B] hw state readout: disabled, pipe B <7>[ 54.947469] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:420:DP-MST C] hw state readout: disabled, pipe C <7>[ 54.947565] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:388:eDP-1] hw state readout: enabled <7>[ 54.947653] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:397:DP-1] hw state readout: disabled <7>[ 54.947742] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:409:DP-2] hw state readout: disabled <7>[ 54.947833] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:417:DP-3] hw state readout: disabled <7>[ 54.948028] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 173855 kHz <7>[ 54.948128] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7>[ 54.948213] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7>[ 54.948291] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7>[ 54.948362] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7>[ 54.948431] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz <7>[ 54.948503] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:148:pipe A] min_cdclk 173855 kHz <7>[ 54.948573] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] min_cdclk 0 kHz <7>[ 54.948641] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] min_cdclk 0 kHz <7>[ 54.948708] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] min_cdclk 0 kHz <7>[ 54.948777] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] min_cdclk 0 kHz <7>[ 54.948849] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] min_cdclk 0 kHz <7>[ 54.948938] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] min_cdclk 0 kHz <7>[ 54.949035] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:266:pipe B] min_cdclk 0 kHz <7>[ 54.949131] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] min_cdclk 0 kHz <7>[ 54.949209] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] min_cdclk 0 kHz <7>[ 54.949281] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] min_cdclk 0 kHz <7>[ 54.949350] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] min_cdclk 0 kHz <7>[ 54.949419] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] min_cdclk 0 kHz <7>[ 54.949485] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] min_cdclk 0 kHz <7>[ 54.949553] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:384:pipe C] min_cdclk 0 kHz <7>[ 54.949769] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:148:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 54.949853] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:266:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 54.949947] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:384:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 54.950045] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1 <7>[ 54.950178] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7>[ 54.950282] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7>[ 54.950414] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 54.950518] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A <7>[ 54.950744] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:148:pipe A] enable: yes [setup_hw_state] <7>[ 54.950864] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 54.951000] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 54.951127] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 54.951231] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 54.951328] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 54.951425] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 54.951523] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64 <7>[ 54.951619] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 54.951714] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 54.951804] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 54.951923] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 54.952039] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 54.952151] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 54.952250] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 54.952335] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 54.952420] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96 <7>[ 54.952505] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 54.952589] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.952674] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.952758] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 54.952846] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.952936] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 54.953026] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 54.953115] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 54.953203] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 54.953288] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 54.953369] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 54.953454] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x41eb0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 54.953543] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 54.953631] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 54.953717] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 54.953800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.953893] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.953985] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.954075] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 54.954163] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 54.954248] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.954328] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.954407] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.954487] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 54.954565] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 54.954644] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:266:pipe B] enable: no [setup_hw_state] <7>[ 54.954727] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:384:pipe C] enable: no [setup_hw_state] <7>[ 54.955003] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:148:pipe A][PLANE:33:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 54.955117] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:33:plane 1A] on [CRTC:148:pipe A] <6>[ 54.959699] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7>[ 54.963413] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x003543f7 <7>[ 54.963535] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7>[ 54.963635] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7>[ 54.963725] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 54.963804] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000008d2 <7>[ 54.963900] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 54.963991] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 54.964068] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 54.964143] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 54.964215] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 54.964283] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 54.964348] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 54.964412] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 54.964474] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 54.964538] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 54.964645] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7>[ 54.974990] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 54.975813] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 54.976057] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000000df <7>[ 54.976174] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000000df <7>[ 54.976278] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7>[ 54.976371] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7>[ 54.976456] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6>[ 55.617122] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6>[ 55.617125] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6>[ 55.617126] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7>[ 55.617253] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7>[ 55.617386] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 55.617496] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 55.617609] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 55.617747] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7>[ 55.617884] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7>[ 55.618042] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7>[ 55.618156] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 55.618275] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 55.618388] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 55.619365] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7>[ 55.619460] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7>[ 55.619560] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7>[ 55.619655] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7>[ 55.619746] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7>[ 55.619837] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7>[ 55.619959] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7>[ 55.620071] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7>[ 55.620181] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7>[ 55.620275] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7>[ 55.620358] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7>[ 55.620441] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7>[ 55.620523] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7>[ 55.620604] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7>[ 55.620684] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7>[ 55.620765] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7>[ 55.620849] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7>[ 55.620946] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7>[ 55.621057] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7>[ 55.621161] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7>[ 55.621239] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7>[ 55.621318] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7>[ 55.621394] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7>[ 55.621470] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7>[ 55.621545] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7>[ 55.621618] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7>[ 55.621699] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7>[ 55.621783] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7>[ 55.621870] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7>[ 55.621954] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7>[ 55.622043] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7>[ 55.622131] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7>[ 55.622220] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7>[ 55.622303] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7>[ 55.622382] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7>[ 55.622465] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7>[ 55.622548] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7>[ 55.622635] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7>[ 55.622720] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7>[ 55.622801] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7>[ 55.623204] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7>[ 55.623285] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7>[ 55.623362] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7>[ 55.623434] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7>[ 55.623736] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7>[ 55.623815] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7>[ 55.623897] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7>[ 55.623977] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7>[ 55.624315] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7>[ 55.624387] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7>[ 55.624462] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7>[ 55.624536] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7>[ 55.624611] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7>[ 55.624685] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7>[ 55.624755] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7>[ 55.625235] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7>[ 55.625361] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x003543f7 <7>[ 55.625443] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7>[ 55.625524] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7>[ 55.625601] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 55.625674] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000008d2 <7>[ 55.625745] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 55.625814] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 55.625893] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 55.625963] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 55.626039] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 55.626115] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 55.626190] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 55.626265] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 55.626331] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 55.626415] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7>[ 55.626592] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7>[ 55.628161] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xd19000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 55.630917] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7>[ 55.646829] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7>[ 55.657729] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 55.658080] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 55.659148] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7>[ 55.659280] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7>[ 55.659380] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7>[ 55.659469] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7>[ 55.659547] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7>[ 55.659621] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7>[ 55.659691] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7>[ 55.659762] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7>[ 55.659835] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000 <7>[ 55.662373] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7>[ 55.662455] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606 <7>[ 55.662528] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7>[ 55.663975] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7>[ 55.664074] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6>[ 55.667396] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7>[ 55.671438] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00df63f7 <7>[ 55.671538] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 55.671622] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7>[ 55.671703] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 55.671782] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00001e16 <7>[ 55.671870] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 55.671970] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 55.672069] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 55.672165] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 55.672243] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 55.672318] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 55.672393] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 55.672465] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 55.672534] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6>[ 55.673910] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6>[ 55.676242] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6>[ 55.677283] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7>[ 55.677378] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 55.677490] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7>[ 55.698893] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 55.699543] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 55.700057] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7>[ 55.700235] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7>[ 55.700404] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7>[ 55.700569] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7>[ 55.700728] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6>[ 55.700899] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6>[ 55.700902] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6>[ 55.700904] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6>[ 55.700906] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6>[ 55.700907] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6>[ 55.700909] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6>[ 55.700911] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6>[ 55.700913] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6>[ 55.700914] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6>[ 55.700916] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7>[ 55.700999] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7>[ 55.701281] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7>[ 55.701523] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7>[ 55.702866] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7>[ 55.703036] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7>[ 55.703201] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7>[ 55.703356] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7>[ 55.703504] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7>[ 55.703651] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7>[ 55.703789] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7>[ 55.703947] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7>[ 55.704081] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7>[ 55.704209] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7>[ 55.704352] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7>[ 55.704492] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7>[ 55.704620] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7>[ 55.704747] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7>[ 55.704882] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7>[ 55.705011] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7>[ 55.705130] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7>[ 55.705246] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7>[ 55.705359] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7>[ 55.705467] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7>[ 55.705573] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7>[ 55.705675] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7>[ 55.705772] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7>[ 55.705875] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7>[ 55.705971] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7>[ 55.706064] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7>[ 55.706155] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7>[ 55.706248] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7>[ 55.706338] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7>[ 55.706441] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7>[ 55.706543] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7>[ 55.707007] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7>[ 55.707137] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7>[ 55.707255] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7>[ 55.707663] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7>[ 55.707771] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7>[ 55.707873] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7>[ 55.708444] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7>[ 55.708575] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00df63f7 <7>[ 55.708666] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 55.708753] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7>[ 55.708839] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 55.708954] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00001e16 <7>[ 55.709051] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 55.709145] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 55.709224] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 55.709302] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 55.709375] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 55.709448] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 55.709519] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 55.709587] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 55.709654] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7>[ 55.709736] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7>[ 55.709843] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7>[ 55.711168] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1984000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 55.729016] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056) <7>[ 55.750368] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 55.750880] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 55.752183] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7>[ 55.752444] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 55.754722] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7>[ 55.754949] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 55.756949] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7>[ 55.757139] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 55.799506] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7>[ 55.800461] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 55.800890] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 55.801331] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 55.801717] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 55.802627] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7>[ 55.803056] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7>[ 55.803421] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7>[ 55.805420] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 0: start 0x90008 <7>[ 55.805959] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 1: start 0x90108 <7>[ 55.806437] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 2: start 0x90208 <7>[ 55.806918] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 3: start 0x90308 <7>[ 55.807382] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 4: start 0x903c8 <7>[ 55.807875] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 0: start 0x98008 <7>[ 55.808307] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 1: start 0x98108 <7>[ 55.808784] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 2: start 0x98208 <7>[ 55.809275] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 3: start 0x98308 <7>[ 55.809691] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 4: start 0x983c8 <7>[ 55.810117] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 0: start 0x52008 <7>[ 55.810491] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 1: start 0x52108 <7>[ 55.810872] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 2: start 0x52208 <7>[ 55.811246] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 3: start 0x52308 <7>[ 55.811579] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 4: start 0x523c8 <7>[ 55.812316] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 55.812609] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:148:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 55.812932] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7>[ 55.813300] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:266:pipe B] enable: no [fastset] <7>[ 55.813637] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:384:pipe C] enable: no [fastset] <7>[ 55.815259] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7>[ 55.815473] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7>[ 55.823506] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:266:pipe B] <7>[ 55.824165] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:384:pipe C] <7>[ 55.834047] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:388:eDP-1] adding connector to sysfs <7>[ 55.836461] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:388:eDP-1] backlight device intel_backlight registered <7>[ 55.836625] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:388:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 55.836756] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:388:eDP-1] Panel prepare <7>[ 55.837229] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 55.838271] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:388:eDP-1] generating connector hotplug event <7>[ 55.838337] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:397:DP-1] adding connector to sysfs <7>[ 55.838708] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7>[ 55.839256] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:397:DP-1] generating connector hotplug event <7>[ 55.839288] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:409:DP-2] adding connector to sysfs <7>[ 55.839620] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7>[ 55.840209] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:409:DP-2] generating connector hotplug event <7>[ 55.840243] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:417:DP-3] adding connector to sysfs <7>[ 55.840602] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 55.841164] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:417:DP-3] generating connector hotplug event <6>[ 55.841195] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7>[ 55.841221] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6>[ 55.850619] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 55.854288] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 55.855302] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 55.855446] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7>[ 55.855934] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 55.855939] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 55.857214] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7>[ 55.857256] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:397:DP-1] <7>[ 55.857601] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.857600] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 55.857770] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:397:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 55.857978] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:409:DP-2] <7>[ 55.858155] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.858294] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:409:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 55.858426] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:417:DP-3] <7>[ 55.858585] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.858720] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:417:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 55.858865] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 55.858874] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:33:plane 1A] no fb, skipping <7>[ 55.859004] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:266:pipe B] not active, skipping <7>[ 55.859124] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:384:pipe C] not active, skipping <7>[ 55.859240] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7>[ 55.859548] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 55.859806] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] <7>[ 55.859814] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:388:eDP-1] <7>[ 55.860388] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 55.860727] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 55.860876] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.861016] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.861260] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 55.861265] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.861267] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.861269] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 55.861271] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 55.861274] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.861275] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD monitor <5>[ 55.861279] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.861281] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD size 20, SAD count 0 <5>[ 55.861283] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.861310] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] VRR capable: yes <7>[ 55.861449] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 55.861583] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 55.862111] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7>[ 55.862251] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] status updated from unknown to connected <7>[ 55.863058] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 55.863328] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 55.863336] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <5>[ 55.864175] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.864181] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.864183] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.864261] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] probed modes: <7>[ 55.864274] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 55.864279] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 55.864284] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] <7>[ 55.864290] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:397:DP-1] <7>[ 55.864521] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] disconnected <7>[ 55.864527] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] <7>[ 55.864531] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:409:DP-2] <7>[ 55.864678] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] disconnected <7>[ 55.864682] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] <7>[ 55.864686] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:417:DP-3] <7>[ 55.864811] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] disconnected <7>[ 55.864815] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] enabled? yes <7>[ 55.864819] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:397:DP-1] enabled? no <7>[ 55.864822] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:409:DP-2] enabled? no <7>[ 55.864825] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:417:DP-3] enabled? no <7>[ 55.865050] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 55.865084] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] found preferred mode: 2880x1800 <7>[ 55.865087] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 55.865103] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:148:pipe A] desired mode 2880x1800 set (0,0) <7>[ 55.865235] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 55.865254] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7>[ 55.896405] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01da5000 <6>[ 55.898109] fbcon: xedrmfb (fb0) is primary device <7>[ 55.899750] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:388:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 55.900037] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:387:DDI A/PHY A][CRTC:148:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 55.900268] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7>[ 55.900505] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:148:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 55.900733] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:387:DDI A/PHY A] [CRTC:148:pipe A] <7>[ 55.900979] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288) <7>[ 55.901202] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10 <7>[ 55.901417] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7>[ 55.901633] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes, <7>[ 55.901855] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1, <7>[ 55.902100] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 55.902312] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state: <7>[ 55.902511] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21 <7>[ 55.902709] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 55.902916] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 55.903113] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 55.903307] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 55.903500] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 55.903694] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7>[ 55.903982] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no, <7>[ 55.904206] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 55.904398] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state: <7>[ 55.904582] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21 <7>[ 55.904764] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 55.904992] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <6>[ 55.905135] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7>[ 55.905172] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 55.905348] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 55.905523] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 55.905692] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 55.905943] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000) <7>[ 55.906025] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.906145] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0) <7>[ 55.906291] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.906326] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:148:pipe A] fastset requirement not met, forcing full modeset <7>[ 55.906485] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.906649] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.906797] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.906961] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.906950] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7>[ 55.907112] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.907144] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 55.907185] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7>[ 55.907253] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.907314] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7>[ 55.907387] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.907475] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7>[ 55.907519] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.907636] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7>[ 55.907652] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.907783] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.907780] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 55.907946] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.908075] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.908080] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.908213] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.908215] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.908345] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.908353] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.908485] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.908487] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 55.908615] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.908633] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.908739] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.908762] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.908873] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.908898] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.909003] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.909022] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 55.909127] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.909142] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.909250] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.909262] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.909371] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.909382] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.909499] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.909501] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 55.909629] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.909636] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.909751] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.909767] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.909880] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.909895] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.910012] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:143:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 55.910011] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.910133] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:143:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.910135] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.910259] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.910258] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:143:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.910382] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.910383] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:143:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 55.910506] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.910549] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:148:pipe A] data rate 1390840 num active planes 1 <7>[ 55.910624] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.910738] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.910754] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7>[ 55.910867] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.910947] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7>[ 55.911142] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 55.911312] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 55.911479] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7>[ 55.911734] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:148:pipe A] enable: yes [modeset] <7>[ 55.911951] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 55.912122] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 55.912289] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 55.912450] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 55.912626] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 55.912783] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 55.912953] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7>[ 55.913107] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 55.913258] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 55.913407] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 55.913553] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 55.913696] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 55.913847] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 55.914000] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7>[ 55.914136] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7>[ 55.914276] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7>[ 55.914420] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7>[ 55.914563] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7>[ 55.914705] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7>[ 55.914852] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 55.914991] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 55.915130] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7>[ 55.915271] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 55.915407] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 55.915547] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 55.915684] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 55.915824] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 55.916002] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 55.916149] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 55.916299] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 55.916445] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 55.916590] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 55.916733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 55.916884] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 55.917033] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 55.917197] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 55.917352] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 55.917501] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 55.917656] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 55.917798] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 55.917950] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 55.918079] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 55.918208] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 55.918335] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 55.918478] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 55.918620] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 55.918763] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 55.918925] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:389] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 55.919064] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 55.919200] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 55.919338] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7>[ 55.919474] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7>[ 55.919606] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7>[ 55.919740] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7>[ 55.919881] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <6>[ 55.921443] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 55.925402] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <7>[ 55.925524] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7>[ 55.925732] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <6>[ 55.928115] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 55.929048] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 55.930049] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7>[ 56.128082] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:388:eDP-1] set backlight PWM = 0 <7>[ 56.129832] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7>[ 56.140469] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turn panel power off <7>[ 56.140835] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 56.141016] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 56.141327] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:387:DDI A/PHY A] - short <7>[ 56.141550] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 56.192972] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 56.193469] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:387:DDI A/PHY A] <7>[ 56.193502] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7>[ 56.193595] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 56.193921] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:387:DDI A/PHY A] - short <7>[ 56.194483] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x1341b072) <7>[ 56.194479] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:387:DDI A/PHY A] <7>[ 56.194827] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:387:DDI A/PHY A] <7>[ 56.195212] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:396:DDI TC1/PHY TC1] <7>[ 56.195489] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:398:DP-MST A] <7>[ 56.195755] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DP-MST B] <7>[ 56.196050] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:400:DP-MST C] <7>[ 56.196322] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:408:DDI TC2/PHY TC2] <7>[ 56.196587] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:410:DP-MST A] <7>[ 56.196865] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DP-MST B] <7>[ 56.197143] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:412:DP-MST C] <7>[ 56.197431] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DDI TC3/PHY TC3] <7>[ 56.197717] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:418:DP-MST A] <7>[ 56.198056] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DP-MST B] <7>[ 56.198424] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:420:DP-MST C] <7>[ 56.198780] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 56.200643] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turn panel power on <7>[ 56.201184] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 wait for panel power cycle (493 ms remaining) <7>[ 56.227336] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 56.227622] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:387:DDI A/PHY A] - long <7>[ 56.227880] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 56.228140] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:387:DDI A/PHY A] <7>[ 56.340856] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7>[ 56.696083] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 56.726933] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 56.727498] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 56.728117] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 56.763587] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 56.763969] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:387:DDI A/PHY A] - long <7>[ 56.764303] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 56.764829] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:387:DDI A/PHY A] <7>[ 56.912789] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.912791] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.912817] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.939089] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 56.941620] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turning VDD on <7>[ 56.942272] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 56.944810] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 56.946127] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 56.947084] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7>[ 56.948400] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 56.949689] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 56.950933] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 56.951377] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7>[ 56.952907] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 56.953336] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7>[ 56.954218] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7>[ 56.954885] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7>[ 56.955359] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7>[ 56.955881] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:388:eDP-1] set backlight PWM = 192000 <7>[ 56.971962] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7>[ 56.974486] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:388:eDP-1] <7>[ 56.975131] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:148:pipe A] <7>[ 56.976796] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 56.978478] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <7>[ 56.979937] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000 <7>[ 56.980534] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:388:eDP-1] set backlight level = 13892 <6>[ 56.980953] Console: switching to colour frame buffer device 180x56 <6>[ 57.029282] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7>[ 57.029399] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7>[ 57.030286] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7>[ 57.030832] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7>[ 57.031394] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7>[ 57.031856] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7>[ 57.032287] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7>[ 57.032675] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7>[ 57.033111] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7>[ 57.033459] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7>[ 57.033838] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7>[ 57.034204] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7>[ 57.034560] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7>[ 57.034856] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7>[ 57.035135] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7>[ 57.035403] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7>[ 57.035658] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7>[ 57.035911] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7>[ 57.036156] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7>[ 57.036391] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7>[ 57.036613] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7>[ 57.036821] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7>[ 57.037053] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7>[ 57.037884] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7>[ 57.038107] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7>[ 57.038390] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7>[ 57.038669] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7>[ 57.038981] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7>[ 57.039211] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 57.039425] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 57.039952] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 57.043698] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7>[ 57.055022] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 57.055070] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 57.055991] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] <7>[ 57.056019] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:388:eDP-1] <7>[ 57.056854] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 57.057465] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 57.057776] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 57.058285] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 57.058817] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 57.058830] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 57.058834] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.058836] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 57.058861] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 57.058866] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.058869] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD monitor <5>[ 57.058886] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.058889] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD size 20, SAD count 0 <5>[ 57.058895] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.058943] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] VRR capable: yes <7>[ 57.059211] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 57.059469] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5>[ 57.060369] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 57.060373] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 57.060376] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.060502] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] probed modes: <7>[ 57.060520] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 57.060528] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 57.060536] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] <7>[ 57.060545] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:397:DP-1] <7>[ 57.060831] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 57.061248] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] disconnected <7>[ 57.061268] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] <7>[ 57.061284] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:409:DP-2] <7>[ 57.061825] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 57.062173] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] disconnected <7>[ 57.062180] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] <7>[ 57.062186] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:417:DP-3] <7>[ 57.062434] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 57.062611] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] disconnected <7>[ 57.062617] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] enabled? yes <7>[ 57.062622] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:397:DP-1] enabled? no <7>[ 57.062626] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:409:DP-2] enabled? no <7>[ 57.062630] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:417:DP-3] enabled? no <7>[ 57.062780] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 57.062815] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] found preferred mode: 2880x1800 <7>[ 57.062821] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 57.062884] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:148:pipe A] desired mode 2880x1800 set (0,0) <7>[ 57.064627] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 57.064829] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 57.073552] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 57.090810] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 57.090887] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 57.091811] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] <7>[ 57.091880] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:388:eDP-1] <7>[ 57.093415] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 57.095297] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 57.095771] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 57.096225] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 57.097257] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 57.097283] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 57.097290] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.097294] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 57.097304] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 57.097312] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.097317] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD monitor <5>[ 57.097348] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.097352] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD size 20, SAD count 0 <5>[ 57.097360] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.097436] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] VRR capable: yes <7>[ 57.097747] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 57.098059] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5>[ 57.099399] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 57.099408] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 57.099411] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.099613] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] probed modes: <7>[ 57.099647] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 57.099658] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 57.099669] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] <7>[ 57.099681] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:397:DP-1] <7>[ 57.100125] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] disconnected <7>[ 57.100146] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] <7>[ 57.100159] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:409:DP-2] <7>[ 57.100625] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] disconnected <7>[ 57.100639] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] <7>[ 57.100652] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:417:DP-3] <7>[ 57.101292] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] disconnected <7>[ 57.101302] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] enabled? yes <7>[ 57.101312] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:397:DP-1] enabled? no <7>[ 57.101318] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:409:DP-2] enabled? no <7>[ 57.101323] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:417:DP-3] enabled? no <7>[ 57.101801] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 57.101890] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] found preferred mode: 2880x1800 <7>[ 57.101899] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 57.101991] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:148:pipe A] desired mode 2880x1800 set (0,0) <7>[ 57.123625] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 57.139911] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 57.140648] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 57.142282] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 57.160925] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 57.162449] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 57.173530] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 57.173896] [IGT] xe_module_load: finished subtest load, SUCCESS <7>[ 57.174509] [IGT] xe_module_load: exiting, ret=0 <7>[ 57.183627] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 57.188919] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 57.189333] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 57.189676] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 57.190411] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 57.191083] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 57.222863] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 57.223022] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 57.223135] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 58.128831] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 58.128871] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 58.128883] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 59.601794] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turning VDD off <7>[ 59.602358] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067