<5>[ 0.000000] Linux version 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Tue Jan 20 00:59:17 UTC 2026 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x69914018 ESRT=0x6994ba98 MOKvar=0x6ccfb000 <6>[ 0.000000] efi: Remove mem254: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem256: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.8 present. <6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D99.2508051732 08/05/2025 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3100.000 MHz processor <6>[ 0.000000] tsc: Detected 3110.400 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000017] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs <6>[ 0.000018] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000382] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000383] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.004894] esrt: Reserving ESRT space from 0x000000006994ba98 to 0x000000006994bbe8. <7>[ 0.004902] e820: update [mem 0x6994b000-0x6994bfff] usable ==> reserved <6>[ 0.004919] Using GB pages for direct mapping <6>[ 0.005537] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005538] printk: early log buf free: 258784(98%) <6>[ 0.005538] Secure boot disabled <6>[ 0.005540] ACPI: Early table checksum verification disabled <6>[ 0.005543] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.005545] ACPI: XSDT 0x000000006FF70228 000194 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005549] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013) <6>[ 0.005552] ACPI: DSDT 0x000000006FFB6000 02555F (v02 INTEL LNL 00000002 01000013) <6>[ 0.005554] ACPI: FACS 0x000000006FEF1000 000040 <6>[ 0.005555] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005556] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005558] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005559] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005560] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005562] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005563] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005565] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005566] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005567] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005569] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000) <6>[ 0.005570] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005572] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005573] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930) <6>[ 0.005574] ACPI: SSDT 0x000000006FFDD000 009176 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005575] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005577] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930) <6>[ 0.005578] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005579] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005581] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005582] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005583] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013) <6>[ 0.005585] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013) <6>[ 0.005586] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930) <6>[ 0.005587] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005589] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930) <6>[ 0.005590] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930) <6>[ 0.005591] ACPI: LPIT 0x000000006FF85000 0000CC (v01 INTEL LNL 00000002 01000013) <6>[ 0.005592] ACPI: SSDT 0x000000006FF84000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005594] ACPI: SSDT 0x000000006FF83000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005595] ACPI: DBGP 0x000000006FF82000 000034 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005596] ACPI: DBG2 0x000000006FF81000 000054 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005598] ACPI: NHLT 0x000000006FF80000 0002E3 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005599] ACPI: SSDT 0x000000006FF7E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005600] ACPI: SSDT 0x000000006FF77000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005602] ACPI: ECDT 0x000000006FF76000 000069 (v01 LNL 00000002 01000013) <6>[ 0.005603] ACPI: DMAR 0x000000006FF75000 0000D8 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005604] ACPI: FPDT 0x000000006FF74000 000044 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005605] ACPI: SSDT 0x000000006FF73000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930) <6>[ 0.005607] ACPI: SSDT 0x000000006FF71000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005608] ACPI: SSDT 0x000000006FF6D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005609] ACPI: SDEV 0x000000006FFA8000 000046 (v01 00000000 00000000) <6>[ 0.005611] ACPI: SSDT 0x000000006FF62000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930) <6>[ 0.005612] ACPI: PHAT 0x000000006FF61000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D) <6>[ 0.005613] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005614] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113] <6>[ 0.005615] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb55e] <6>[ 0.005616] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f] <6>[ 0.005616] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387] <6>[ 0.005616] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9] <6>[ 0.005617] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa] <6>[ 0.005617] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.005617] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.005618] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.005618] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.005618] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.005618] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.005619] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6] <6>[ 0.005619] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f] <6>[ 0.005619] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1] <6>[ 0.005620] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f] <6>[ 0.005620] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4] <6>[ 0.005620] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6175] <6>[ 0.005620] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df] <6>[ 0.005621] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2] <6>[ 0.005621] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e] <6>[ 0.005621] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955] <6>[ 0.005622] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037] <6>[ 0.005622] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027] <6>[ 0.005622] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7] <6>[ 0.005623] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b] <6>[ 0.005623] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2] <6>[ 0.005623] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320] <6>[ 0.005623] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469] <6>[ 0.005624] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815] <6>[ 0.005624] ACPI: Reserving LPIT table memory at [mem 0x6ff85000-0x6ff850cb] <6>[ 0.005624] ACPI: Reserving SSDT table memory at [mem 0x6ff84000-0x6ff84d5b] <6>[ 0.005625] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff831ef] <6>[ 0.005625] ACPI: Reserving DBGP table memory at [mem 0x6ff82000-0x6ff82033] <6>[ 0.005625] ACPI: Reserving DBG2 table memory at [mem 0x6ff81000-0x6ff81053] <6>[ 0.005626] ACPI: Reserving NHLT table memory at [mem 0x6ff80000-0x6ff802e2] <6>[ 0.005626] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff7f15b] <6>[ 0.005626] ACPI: Reserving SSDT table memory at [mem 0x6ff77000-0x6ff7d53a] <6>[ 0.005626] ACPI: Reserving ECDT table memory at [mem 0x6ff76000-0x6ff76068] <6>[ 0.005627] ACPI: Reserving DMAR table memory at [mem 0x6ff75000-0x6ff750d7] <6>[ 0.005627] ACPI: Reserving FPDT table memory at [mem 0x6ff74000-0x6ff74043] <6>[ 0.005627] ACPI: Reserving SSDT table memory at [mem 0x6ff73000-0x6ff7386c] <6>[ 0.005628] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff723da] <6>[ 0.005628] ACPI: Reserving SSDT table memory at [mem 0x6ff6d000-0x6ff6f462] <6>[ 0.005628] ACPI: Reserving SDEV table memory at [mem 0x6ffa8000-0x6ffa8045] <6>[ 0.005628] ACPI: Reserving SSDT table memory at [mem 0x6ff62000-0x6ff6c4f9] <6>[ 0.005629] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff617bf] <6>[ 0.005629] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037] <6>[ 0.005699] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.005902] No NUMA configuration found <6>[ 0.005902] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff] <6>[ 0.005907] NODE_DATA(0) allocated [mem 0x87f352e40-0x87f37dfff] <6>[ 0.006023] Zone ranges: <6>[ 0.006023] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006024] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006025] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.006026] Device empty <6>[ 0.006026] Movable zone start for each node <6>[ 0.006027] Early memory node ranges <6>[ 0.006027] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006028] node 0: [mem 0x0000000000100000-0x000000006cac0fff] <6>[ 0.006028] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.006029] node 0: [mem 0x0000000104500000-0x000000087f7fffff] <6>[ 0.006030] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.006035] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006053] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.007624] On node 0, zone DMA32: 13630 pages in unavailable ranges <6>[ 0.035490] On node 0, zone Normal: 17664 pages in unavailable ranges <6>[ 0.035498] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.035985] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.035991] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.036042] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.036044] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.036045] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.036047] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.036048] ACPI: HPET id: 0x8086a701 base: 0xfed00000 <7>[ 0.036059] e820: update [mem 0x6992d000-0x69947fff] usable ==> reserved <6>[ 0.036066] TSC deadline timer available <6>[ 0.036067] CPU topo: Max. logical packages: 1 <6>[ 0.036068] CPU topo: Max. logical dies: 1 <6>[ 0.036068] CPU topo: Max. dies per package: 1 <6>[ 0.036069] CPU topo: Max. threads per core: 1 <6>[ 0.036070] CPU topo: Num. cores per package: 8 <6>[ 0.036071] CPU topo: Num. threads per package: 8 <6>[ 0.036071] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs <6>[ 0.036083] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.036085] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.036085] PM: hibernation: Registered nosave memory: [mem 0x6992d000-0x69947fff] <6>[ 0.036086] PM: hibernation: Registered nosave memory: [mem 0x6994b000-0x6994bfff] <6>[ 0.036087] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fffefff] <6>[ 0.036088] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x1044fffff] <6>[ 0.036089] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.036090] Booting paravirtualized kernel on bare hardware <6>[ 0.036092] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.036101] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 <6>[ 0.036426] percpu: Embedded 87 pages/cpu s233472 r8192 d114688 u524288 <7>[ 0.036431] pcpu-alloc: s233472 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.036432] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 <5>[ 0.036445] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.036537] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.036554] random: crng init done <6>[ 0.038380] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.039284] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.039344] software IO TLB: area num 8. <6>[ 0.046721] Fallback order for Node 0: 0 <6>[ 0.046724] Built 1 zonelists, mobility grouping on. Total pages: 8289632 <6>[ 0.046724] Policy zone: Normal <6>[ 0.046734] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.046734] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.046738] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.047653] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.080351] ********************************************************** <4>[ 0.080352] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.080352] ** ** <4>[ 0.080352] ** This system shows unhashed kernel memory addresses ** <4>[ 0.080353] ** via the console, logs, and other interfaces. This ** <4>[ 0.080353] ** might reduce the security of your system. ** <4>[ 0.080353] ** ** <4>[ 0.080353] ** If you see this message and you are not debugging ** <4>[ 0.080353] ** the kernel, report this immediately to your system ** <4>[ 0.080354] ** administrator! ** <4>[ 0.080354] ** ** <4>[ 0.080354] ** Use hash_pointers=always to force this mode off ** <4>[ 0.080354] ** ** <4>[ 0.080354] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.080354] ********************************************************** <6>[ 0.081471] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 0.089821] ftrace: allocating 61070 entries in 240 pages <6>[ 0.089823] ftrace: allocated 240 pages with 4 groups <6>[ 0.091235] Dynamic Preempt: voluntary <6>[ 0.091724] Running RCU self tests <6>[ 0.091724] Running RCU synchronous self tests <6>[ 0.091725] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.091725] rcu: RCU lockdep checking is enabled. <6>[ 0.091725] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. <6>[ 0.091726] Trampoline variant of Tasks RCU enabled. <6>[ 0.091726] Rude variant of Tasks RCU enabled. <6>[ 0.091726] Tracing variant of Tasks RCU enabled. <6>[ 0.091727] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.091727] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 <6>[ 0.091792] Running RCU synchronous self tests <6>[ 0.091795] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.091798] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.091800] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.102420] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 <6>[ 0.102886] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.103296] Console: colour dummy device 80x25 <6>[ 0.103304] printk: legacy console [tty0] enabled <6>[ 0.104438] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.104445] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.104449] ... MAX_LOCK_DEPTH: 48 <6>[ 0.104452] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.104456] ... CLASSHASH_SIZE: 4096 <6>[ 0.104460] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.104464] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.104467] ... CHAINHASH_SIZE: 262144 <6>[ 0.104471] memory used by lock dependency info: 54145 kB <6>[ 0.104475] memory used for stack traces: 4224 kB <6>[ 0.104479] per task-struct memory footprint: 1920 bytes <6>[ 0.104530] ACPI: Core revision 20250807 <6>[ 0.105402] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.105465] APIC: Switch to symmetric I/O mode setup <6>[ 0.105471] DMAR: Host address width 38 <6>[ 0.105474] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.105512] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.105548] DMAR: DRHD base: 0x000000fc810000 flags: 0x0 <6>[ 0.105570] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.105598] DMAR: DRHD base: 0x000000fc820000 flags: 0x1 <6>[ 0.105623] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda <6>[ 0.105657] DMAR: SATC flags: 0x1 <6>[ 0.105666] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2 <6>[ 0.105671] DMAR-IR: HPET id 0 under DRHD base 0xfc820000 <6>[ 0.105675] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.107723] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.112744] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 0.112762] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400) <6>[ 0.112839] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.112846] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.113023] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.113028] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.113037] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.113049] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.113056] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.113061] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.113065] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.113073] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.113088] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.113095] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.113100] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.113104] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.113110] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.113116] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.113123] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.113128] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.113132] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.113137] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.113142] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.113757] Freeing SMP alternatives memory: 56K <6>[ 0.113757] pid_max: default: 32768 minimum: 301 <6>[ 0.113757] landlock: Up and running. <6>[ 0.113757] Yama: becoming mindful. <6>[ 0.113757] AppArmor: AppArmor initialized <6>[ 0.113757] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.113757] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.113757] Running RCU synchronous self tests <6>[ 0.113757] Running RCU synchronous self tests <6>[ 0.113757] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1) <6>[ 0.113757] Performance Events: XSAVE Architectural LBR, PEBS fmt6+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.113757] core: cpu_core PMU driver: <6>[ 0.113757] ... version: 6 <6>[ 0.113757] ... bit width: 48 <6>[ 0.113757] ... generic counters: 10 <6>[ 0.113757] ... generic bitmap: 00000000000003ff <6>[ 0.113757] ... fixed-purpose counters: 4 <6>[ 0.113762] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.113766] ... value mask: 0000ffffffffffff <6>[ 0.113771] ... max period: 00007fffffffffff <6>[ 0.113775] ... global_ctrl mask: 0001000f000003ff <6>[ 0.113845] signal: max sigframe size: 3632 <6>[ 0.113869] Estimated ratio of average max frequency by base frequency (times 1024): 1189 <6>[ 0.113966] rcu: Hierarchical SRCU implementation. <6>[ 0.113970] rcu: Max phase no-delay instances is 400. <6>[ 0.114115] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.115940] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.116206] smp: Bringing up secondary CPUs ... <6>[ 0.116544] smpboot: x86: Booting SMP configuration: <6>[ 0.116551] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 <6>[ 0.010684] core: The event 0x5d0 is not supported as an auto-counter reload event. <6>[ 0.010684] core: cpu_atom PMU driver: <6>[ 0.010684] ... version: 6 <6>[ 0.010684] ... bit width: 48 <6>[ 0.010684] ... generic counters: 8 <6>[ 0.010684] ... generic bitmap: 00000000000000ff <6>[ 0.010684] ... fixed-purpose counters: 6 <6>[ 0.010684] ... fixed-purpose bitmap: 0000000000000077 <6>[ 0.010684] ... value mask: 0000ffffffffffff <6>[ 0.010684] ... max period: 00007fffffffffff <6>[ 0.010684] ... global_ctrl mask: 00000077000000ff <6>[ 0.127859] smp: Brought up 1 node, 8 CPUs <6>[ 0.127859] smpboot: Total of 8 processors activated (49766.40 BogoMIPS) <6>[ 0.129960] Memory: 32357960K/33158528K available (25570K kernel code, 5608K rwdata, 9672K rodata, 5724K init, 68176K bss, 777284K reserved, 0K cma-reserved) <6>[ 0.131759] devtmpfs: initialized <6>[ 0.132057] x86/mm: Memory block size: 128MB <6>[ 0.152977] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes) <6>[ 0.153829] Running RCU synchronous self tests <6>[ 0.153841] Running RCU synchronous self tests <6>[ 0.155000] Running RCU Tasks wait API self tests <6>[ 0.155011] Running RCU Tasks Rude wait API self tests <6>[ 0.155011] Running RCU Tasks Trace wait API self tests <6>[ 0.168828] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.169135] posixtimers hash table entries: 4096 (order: 7, 294912 bytes, linear) <6>[ 0.169215] futex hash table entries: 2048 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear). <6>[ 0.170765] PM: RTC time: 03:15:20, date: 2026-01-20 <6>[ 0.171566] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.172799] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.173123] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.173421] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.173486] audit: initializing netlink subsys (disabled) <5>[ 0.173530] audit: type=2000 audit(1768878920.060:1): state=initialized audit_enabled=0 res=1 <6>[ 0.174510] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.174512] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.174519] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.174525] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.174531] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.174570] cpuidle: using governor ladder <6>[ 0.174570] cpuidle: using governor menu <6>[ 0.174872] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.175293] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.175321] PCI: Using configuration type 1 for base access <6>[ 0.175447] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.177084] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.177084] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.177084] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.177084] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.181790] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.181798] raid6: using avx2x2 recovery algorithm <6>[ 0.182410] fbcon: Taking over console <6>[ 0.182632] ACPI: Added _OSI(Module Device) <6>[ 0.182634] ACPI: Added _OSI(Processor Device) <6>[ 0.182636] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.187793] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.687754] ACPI: 31 ACPI AML tables successfully acquired and loaded <6>[ 0.726525] ACPI: EC: EC started <6>[ 0.726549] ACPI: EC: interrupt blocked <6>[ 0.733767] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.733775] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 0.784816] Callback from call_rcu_tasks() invoked. <6>[ 1.097531] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.097542] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.134601] ACPI: Interpreter enabled <6>[ 1.134862] ACPI: PM: (supports S0 S4 S5) <6>[ 1.134875] ACPI: Using IOAPIC for interrupt routing <6>[ 1.151320] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.151342] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.212871] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.212951] ACPI: Enabled 13 GPEs in block 80 to DF <6>[ 1.335129] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource <6>[ 1.336065] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource <6>[ 1.344926] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.689980] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 1.727766] ACPI: \_SB_.PC00.RP02.PXP_: New power resource <6>[ 1.906621] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource <6>[ 1.908718] ACPI: \_SB_.PC00.RP04.PXP_: New power resource <6>[ 1.925085] ACPI: \_SB_.PC00.RP05.PXP_: New power resource <6>[ 1.951915] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 1.952672] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 1.952672] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.347286] ACPI: \_TZ_.FN00: New power resource <6>[ 2.348042] ACPI: \_TZ_.FN01: New power resource <6>[ 2.348719] ACPI: \_TZ_.FN02: New power resource <6>[ 2.349402] ACPI: \_TZ_.FN03: New power resource <6>[ 2.350619] ACPI: \_TZ_.FN04: New power resource <6>[ 2.352176] ACPI: \PIN_: New power resource <6>[ 2.355716] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.355732] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.358936] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 2.367890] PCI host bridge to bus 0000:00 <6>[ 2.367920] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.367928] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.367935] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.367942] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 2.367949] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window] <6>[ 2.367958] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.370901] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.371552] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.371644] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref] <6>[ 2.371652] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref] <6>[ 2.371662] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref] <6>[ 2.371706] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.373693] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.373724] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit] <6>[ 2.375248] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.375278] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit] <6>[ 2.375285] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit] <6>[ 2.376163] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port <6>[ 2.376206] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.376218] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 2.376236] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 2.376352] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.376424] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.380949] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port <6>[ 2.380994] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.381006] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 2.381025] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 2.381143] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold <6>[ 2.381208] pci 0000:00:07.1: PTM enabled (root), 4ns granularity <6>[ 2.385215] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port <6>[ 2.385258] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.385270] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 2.385288] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 2.385404] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold <6>[ 2.385469] pci 0000:00:07.2: PTM enabled (root), 4ns granularity <6>[ 2.389609] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.389646] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit] <6>[ 2.389660] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.389903] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.389932] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit] <6>[ 2.389939] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit] <6>[ 2.390395] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.390449] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit] <6>[ 2.390520] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.392416] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.392469] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit] <6>[ 2.392477] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit] <6>[ 2.392536] pci 0000:00:0d.2: supports D1 D2 <6>[ 2.392540] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.393814] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.393866] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit] <6>[ 2.393874] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit] <6>[ 2.393933] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.393937] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.395955] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.396013] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit] <6>[ 2.396084] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.398549] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.398639] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit] <6>[ 2.398745] pci 0000:00:13.0: PME# supported from D3hot <6>[ 2.402078] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.402217] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit] <6>[ 2.402382] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.408259] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.408378] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit] <6>[ 2.408400] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit] <6>[ 2.409237] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.409514] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.423491] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.423712] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.438200] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.438421] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.452172] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.452392] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.466264] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.466430] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit] <6>[ 2.466619] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.474146] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port <6>[ 2.474228] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.474248] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 2.474267] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 2.474500] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 2.474628] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity <6>[ 2.488739] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port <6>[ 2.488887] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.488944] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 2.489455] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <6>[ 2.489739] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity <6>[ 2.504741] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.509410] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.509767] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit] <6>[ 2.509767] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit] <6>[ 2.509921] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.511247] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.511431] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit] <6>[ 2.511461] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.516736] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.517048] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.518190] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.518633] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.519045] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.519522] pci 0000:7f:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint <6>[ 2.519675] pci 0000:7f:00.0: BAR 0 [mem 0x94380000-0x9439ffff] <6>[ 2.519694] pci 0000:7f:00.0: BAR 1 [mem 0x94300000-0x9437ffff] <6>[ 2.519712] pci 0000:7f:00.0: BAR 2 [io 0x3000-0x301f] <6>[ 2.519730] pci 0000:7f:00.0: BAR 3 [mem 0x943a0000-0x943a3fff] <6>[ 2.519756] pci 0000:7f:00.0: ROM [mem 0xfffc0000-0xffffffff pref] <6>[ 2.520022] pci 0000:7f:00.0: PME# supported from D0 D3hot D3cold <6>[ 2.521546] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.523852] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.524567] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint <6>[ 2.524685] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit] <6>[ 2.528427] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.528576] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.988987] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 2.989017] Low-power S0 idle used by default for system suspend <6>[ 3.159455] ACPI: EC: interrupt unblocked <6>[ 3.159478] ACPI: EC: event unblocked <6>[ 3.159758] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 3.159758] ACPI: EC: GPE=0x6e <6>[ 3.159758] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 3.159758] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 3.162051] iommu: Default domain type: Translated <6>[ 3.162051] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 3.166230] SCSI subsystem initialized <7>[ 3.167018] libata version 3.00 loaded. <6>[ 3.167074] ACPI: bus type USB registered <6>[ 3.167351] usbcore: registered new interface driver usbfs <6>[ 3.167489] usbcore: registered new interface driver hub <6>[ 3.167600] usbcore: registered new device driver usb <6>[ 3.168045] pps_core: LinuxPPS API ver. 1 registered <6>[ 3.168057] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 3.168113] PTP clock support registered <6>[ 3.169901] EDAC MC: Ver: 3.0.0 <6>[ 3.171775] efivars: Registered efivars operations <6>[ 3.174262] NetLabel: Initializing <6>[ 3.174273] NetLabel: domain hash size = 128 <6>[ 3.174283] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 3.174457] NetLabel: unlabeled traffic allowed by default <6>[ 3.174497] mctp: management component transport protocol core <6>[ 3.174510] NET: Registered PF_MCTP protocol family <6>[ 3.174625] PCI: Using ACPI for IRQ routing <7>[ 3.237048] PCI: pci_cache_line_size set to 64 bytes <6>[ 3.237341] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 3.237508] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 3.237531] e820: reserve RAM buffer [mem 0x6992d000-0x6bffffff] <7>[ 3.237540] e820: reserve RAM buffer [mem 0x6994b000-0x6bffffff] <7>[ 3.237547] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff] <7>[ 3.237555] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 3.238829] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 3.238855] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 3.238867] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 3.238903] vgaarb: loaded <7>[ 3.242784] Monitor-Mwait will be used to enter C-1 state <7>[ 3.242875] Monitor-Mwait will be used to enter C-2 state <7>[ 3.242875] Monitor-Mwait will be used to enter C-3 state <6>[ 3.252829] clocksource: Switched to clocksource tsc-early <5>[ 3.266624] VFS: Disk quotas dquot_6.6.0 <6>[ 3.266701] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 3.269666] AppArmor: AppArmor Filesystem Enabled <6>[ 3.270171] pnp: PnP ACPI init <6>[ 3.272474] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 3.272503] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 3.276224] system 00:02: [io 0x06a4] has been reserved <6>[ 3.276248] system 00:02: [io 0x06a0] has been reserved <6>[ 3.335168] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 3.335196] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved <6>[ 3.335227] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 3.335250] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 3.335272] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved <6>[ 3.335298] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 3.335325] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 3.335347] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 3.343576] system 00:04: [io 0x2000-0x20fe] has been reserved <6>[ 3.353641] system 00:06: [io 0x1854-0x1857] has been reserved <6>[ 3.356159] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 3.365059] pnp: PnP ACPI: found 8 devices <6>[ 3.381405] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 3.383839] NET: Registered PF_INET protocol family <6>[ 3.384018] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.385987] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 3.386142] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 3.386298] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.387122] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 3.388166] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 3.388580] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.389324] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.390094] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 3.390157] pci 0000:7f:00.0: ROM [mem 0xfffc0000-0xffffffff pref]: can't claim; no compatible bridge window <6>[ 3.390177] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000 <6>[ 3.390188] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000 <6>[ 3.390197] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000 <6>[ 3.390242] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 3.390249] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned <6>[ 3.390256] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned <6>[ 3.390263] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned <6>[ 3.390288] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned <6>[ 3.390311] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned <6>[ 3.390332] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned <6>[ 3.390355] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned <6>[ 3.390393] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 3.390405] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 3.390416] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 3.390425] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 3.390438] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 3.390452] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff] <6>[ 3.390462] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 3.390471] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 3.390484] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 3.390491] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff] <6>[ 3.390501] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 3.390510] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 3.390527] pci 0000:7f:00.0: ROM [mem 0x943c0000-0x943fffff pref]: assigned <6>[ 3.390534] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 3.390540] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 3.390550] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 3.390563] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 3.390600] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 3.390647] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 3.390654] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 3.390660] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 3.390667] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 3.390674] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window] <6>[ 3.390681] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] <6>[ 3.390703] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff] <6>[ 3.390710] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 3.390718] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff] <6>[ 3.390723] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 3.390730] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 3.390738] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff] <6>[ 3.390744] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 3.390750] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 3.390758] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff] <6>[ 3.390764] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff] <6>[ 3.390771] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff] <6>[ 3.391978] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 3.393948] PCI: CLS 64 bytes, default 64 <6>[ 3.394068] DMAR: No RMRR found <6>[ 3.394080] DMAR: No ATSR found <6>[ 3.394084] DMAR: dmar1: Using Queued invalidation <6>[ 3.394092] DMAR: dmar0: Using Queued invalidation <6>[ 3.394099] DMAR: dmar2: Using Queued invalidation <6>[ 3.395330] pci 0000:00:04.0: Adding to iommu group 0 <6>[ 3.395418] pci 0000:00:05.0: Adding to iommu group 1 <6>[ 3.395502] pci 0000:00:0a.0: Adding to iommu group 2 <6>[ 3.395574] pci 0000:00:0b.0: Adding to iommu group 3 <6>[ 3.398851] pci 0000:00:02.0: Adding to iommu group 4 <6>[ 3.400825] pci 0000:00:00.0: Adding to iommu group 5 <6>[ 3.400889] pci 0000:00:07.0: Adding to iommu group 6 <6>[ 3.400949] pci 0000:00:07.1: Adding to iommu group 7 <6>[ 3.401001] pci 0000:00:07.2: Adding to iommu group 8 <6>[ 3.401080] pci 0000:00:0d.0: Adding to iommu group 9 <6>[ 3.401116] pci 0000:00:0d.2: Adding to iommu group 9 <6>[ 3.401154] pci 0000:00:0d.3: Adding to iommu group 9 <6>[ 3.401216] pci 0000:00:12.0: Adding to iommu group 10 <6>[ 3.401274] pci 0000:00:13.0: Adding to iommu group 11 <6>[ 3.401338] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 3.401377] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 3.401457] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 3.401497] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 3.401536] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 3.401576] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 3.401636] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 3.401692] pci 0000:00:1c.0: Adding to iommu group 15 <6>[ 3.401772] pci 0000:00:1c.4: Adding to iommu group 16 <6>[ 3.401853] pci 0000:00:1f.0: Adding to iommu group 17 <6>[ 3.401892] pci 0000:00:1f.3: Adding to iommu group 17 <6>[ 3.401934] pci 0000:00:1f.4: Adding to iommu group 17 <6>[ 3.401974] pci 0000:00:1f.5: Adding to iommu group 17 <6>[ 3.402029] pci 0000:7f:00.0: Adding to iommu group 18 <6>[ 3.402106] pci 0000:80:00.0: Adding to iommu group 19 <6>[ 3.409913] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 3.409921] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 3.409927] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB) <6>[ 3.415953] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 3.416174] clocksource: Switched to clocksource tsc <6>[ 3.417005] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 3.461673] Initialise system trusted keyrings <5>[ 3.462184] Key type blacklist registered <6>[ 3.463029] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 3.472518] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 3.472599] ntfs3: Enabled Linux POSIX ACLs support <6>[ 3.472603] ntfs3: Read-only LZX/Xpress compression included <5>[ 3.473150] integrity: Platform Keyring initialized <5>[ 3.473163] integrity: Machine keyring initialized <6>[ 3.477276] xor: automatically using best checksumming function avx <5>[ 3.477283] Key type asymmetric registered <5>[ 3.477290] Asymmetric key parser 'x509' registered <6>[ 3.477372] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 3.477916] io scheduler mq-deadline registered <6>[ 3.478988] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.480056] pcieport 0000:00:07.0: PME: Signaling with IRQ 126 <6>[ 3.480597] pcieport 0000:00:07.0: AER: enabled with IRQ 126 <6>[ 3.481431] pcieport 0000:00:07.1: PME: Signaling with IRQ 127 <6>[ 3.481883] pcieport 0000:00:07.1: AER: enabled with IRQ 127 <6>[ 3.482707] pcieport 0000:00:07.2: PME: Signaling with IRQ 128 <6>[ 3.483196] pcieport 0000:00:07.2: AER: enabled with IRQ 128 <6>[ 3.483924] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129 <6>[ 3.484393] pcieport 0000:00:1c.0: AER: enabled with IRQ 129 <6>[ 3.485448] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130 <6>[ 3.486013] pcieport 0000:00:1c.4: AER: enabled with IRQ 130 <6>[ 3.487248] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 3.487382] ACPI: button: Lid Switch [LID0] <6>[ 3.487557] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 3.487684] ACPI: button: Sleep Button [SLPB] <6>[ 3.487846] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 3.488034] ACPI: button: Power Button [PWRB] <6>[ 3.581450] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 3.581477] ACPI: thermal: Thermal Zone [TZ00] (39 C) <6>[ 3.583865] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 3.583951] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 3.585811] ACPI: battery: Slot [BAT0] (battery present) <6>[ 3.607259] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 3.624193] serial 0000:00:12.0: enabling device (0000 -> 0002) <5>[ 3.627877] hpet_acpi_add: no address or irqs in _CRS <6>[ 3.628135] Linux agpgart interface v0.103 <6>[ 3.629033] ACPI: bus type drm_connector registered <7>[ 3.630044] initcall simpledrm_platform_driver_init blacklisted <6>[ 3.658303] loop: module loaded <6>[ 3.717720] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 3.833209] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 3.945801] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 4.049797] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <5>[ 4.195400] Key type psk registered <6>[ 4.199392] nvme 0000:80:00.0: platform quirk: setting simple suspend <6>[ 4.201870] nvme nvme0: pci function 0000:80:00.0 <6>[ 4.201874] tun: Universal TUN/TAP device driver, 1.6 <6>[ 4.204112] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.204367] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 4.206942] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.214491] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.214543] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 4.214581] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.216230] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 4.216403] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.216484] usb usb1: Product: xHCI Host Controller <6>[ 4.216536] usb usb1: Manufacturer: Linux 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ xhci-hcd <6>[ 4.216593] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 4.219659] hub 1-0:1.0: USB hub found <6>[ 4.219828] hub 1-0:1.0: 1 port detected <6>[ 4.227968] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19 <6>[ 4.227998] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.228019] usb usb2: Product: xHCI Host Controller <6>[ 4.228034] usb usb2: Manufacturer: Linux 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ xhci-hcd <6>[ 4.228058] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 4.229851] hub 2-0:1.0: USB hub found <6>[ 4.229919] hub 2-0:1.0: 3 ports detected <6>[ 4.240720] nvme nvme0: 8/0/0 default/read/poll queues <6>[ 4.253989] nvme0n1: p1 p2 <6>[ 4.276408] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.276466] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 4.278745] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.281980] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.282015] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 4.282048] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.282382] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 4.282404] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.282422] usb usb3: Product: xHCI Host Controller <6>[ 4.282434] usb usb3: Manufacturer: Linux 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ xhci-hcd <6>[ 4.282454] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 4.286029] hub 3-0:1.0: USB hub found <6>[ 4.286329] hub 3-0:1.0: 8 ports detected <6>[ 4.341285] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19 <6>[ 4.341313] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.341331] usb usb4: Product: xHCI Host Controller <6>[ 4.341344] usb usb4: Manufacturer: Linux 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ xhci-hcd <6>[ 4.341363] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 4.344001] hub 4-0:1.0: USB hub found <6>[ 4.344083] hub 4-0:1.0: 2 ports detected <6>[ 4.357961] usbcore: registered new interface driver usb-storage <6>[ 4.358253] usbcore: registered new interface driver usbserial_generic <6>[ 4.358398] usbserial: USB Serial support registered for generic <6>[ 4.358527] usbcore: registered new interface driver ftdi_sio <6>[ 4.358593] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 4.358721] usbcore: registered new interface driver pl2303 <6>[ 4.358783] usbserial: USB Serial support registered for pl2303 <6>[ 4.359001] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 4.359018] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 5.078923] i8042: Can't read CTR while initializing i8042 <3>[ 5.078956] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 5.081533] mousedev: PS/2 mouse device common for all mice <6>[ 5.084621] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 5.086595] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 5.086848] rtc_cmos rtc_cmos: setting system clock to 2026-01-20T03:15:25 UTC (1768878925) <6>[ 5.087055] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 5.087118] i2c_dev: i2c /dev entries driver <6>[ 5.091627] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 5.091643] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 5.091657] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 5.091707] device-mapper: uevent: version 1.0.3 <6>[ 5.092131] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 5.092153] intel_pstate: Intel P-state driver initializing <6>[ 5.099442] Hybrid CPU capacity scaling enabled <6>[ 5.099907] processor cpu0: EM: created perf domain <6>[ 5.100251] processor cpu1: EM: created perf domain <6>[ 5.100553] processor cpu2: EM: created perf domain <6>[ 5.100896] processor cpu3: EM: created perf domain <6>[ 5.101173] processor cpu4: EM: created perf domain <6>[ 5.101440] processor cpu5: EM: created perf domain <6>[ 5.101703] processor cpu6: EM: created perf domain <6>[ 5.101954] processor cpu7: EM: created perf domain <6>[ 5.102970] intel_pstate: HWP enabled <6>[ 5.102977] sdhci: Secure Digital Host Controller Interface driver <6>[ 5.102984] sdhci: Copyright(c) Pierre Ossman <6>[ 5.103138] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 5.105838] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c] <6>[ 5.106633] drop_monitor: Initializing network drop monitor service <6>[ 5.106833] NET: Registered PF_INET6 protocol family <6>[ 5.107836] Segment Routing with IPv6 <6>[ 5.107875] In-situ OAM (IOAM) with IPv6 <6>[ 5.107923] NET: Registered PF_PACKET protocol family <5>[ 5.108114] Key type dns_resolver registered <4>[ 5.111672] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 5.111908] microcode: Current revision: 0x00000124 <6>[ 5.112418] IPI shorthand broadcast: enabled <6>[ 5.125972] sched_clock: Marking stable (5116001464, 9684925)->(5186679644, -60993255) <6>[ 5.126773] registered taskstats version 1 <5>[ 5.127680] Loading compiled-in X.509 certificates <6>[ 5.170443] Demotion targets for Node 0: null <6>[ 5.170738] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946) <6>[ 5.170745] kmemleak: Automatic memory scanning thread started <5>[ 5.170984] Key type .fscrypt registered <5>[ 5.170989] Key type fscrypt-provisioning registered <6>[ 5.173888] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 5.175974] Key type encrypted registered <6>[ 5.175983] AppArmor: AppArmor sha256 policy hashing enabled <6>[ 5.175996] ima: No TPM chip found, activating TPM-bypass! <5>[ 5.176012] Loading compiled-in module X.509 certificates <5>[ 5.176622] Loaded X.509 cert 'Build time autogenerated kernel key: a39eba57f2e082a16a6d45bae7767645ea248723' <6>[ 5.176633] ima: Allocated hash algorithm: sha256 <6>[ 5.176674] ima: No architecture policies found <6>[ 5.176782] evm: Initialising EVM extended attributes: <6>[ 5.176788] evm: security.selinux <6>[ 5.176792] evm: security.SMACK64 <6>[ 5.176795] evm: security.SMACK64EXEC <6>[ 5.176799] evm: security.SMACK64TRANSMUTE <6>[ 5.176804] evm: security.SMACK64MMAP <6>[ 5.176808] evm: security.apparmor <6>[ 5.176811] evm: security.ima <6>[ 5.176815] evm: security.capability <6>[ 5.176819] evm: HMAC attrs: 0x1 <6>[ 5.178877] PM: Magic number: 10:506:260 <6>[ 5.179004] memory memory130: hash matches <6>[ 5.179074] netconsole: network logging started <6>[ 5.179690] RAS: Correctable Errors collector initialized. <6>[ 5.180179] clk: Disabling unused clocks <6>[ 5.180192] PM: genpd: Disabling unused power domains <4>[ 5.180633] check access for rdinit=/init failed: -2, ignoring <6>[ 5.180640] md: Waiting for all devices to be available before autodetect <6>[ 5.180645] md: If you don't use raid, use raid=noautodetect <6>[ 5.180650] md: Autodetecting RAID arrays. <6>[ 5.180657] md: autorun ... <6>[ 5.180660] md: ... autorun DONE. <6>[ 5.229637] EXT4-fs (nvme0n1p2): mounted filesystem 54ecf01e-d16e-4105-bf1f-afe53b1d4d6f ro with ordered data mode. Quota mode: none. <6>[ 5.229718] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 5.230403] devtmpfs: mounted <6>[ 5.247295] Freeing unused decrypted memory: 2036K <6>[ 5.248134] Freeing unused kernel image (initmem) memory: 5724K <6>[ 5.248158] Write protecting the kernel read-only data: 36864k <6>[ 5.248872] Freeing unused kernel image (text/rodata gap) memory: 1052K <6>[ 5.249085] Freeing unused kernel image (rodata/data gap) memory: 568K <6>[ 5.253803] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 5.262783] Run /sbin/init as init process <7>[ 5.262789] with arguments: <7>[ 5.262790] /sbin/init <7>[ 5.262791] with environment: <7>[ 5.262792] HOME=/ <7>[ 5.262793] TERM=linux <7>[ 5.306767] systemd[1]: Inserted module 'autofs4' <7>[ 5.332284] systemd[1]: systemd 255.4-1ubuntu8.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 5.332323] systemd[1]: Detected architecture x86-64. <7>[ 5.333632] systemd[1]: Hostname set to . <7>[ 5.559069] systemd[1]: Queued start job for default target graphical.target. <7>[ 5.585350] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 5.588605] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 5.591959] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 5.592424] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 5.593555] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 5.593756] systemd[1]: Expecting device dev-disk-by\x2duuid-BB99\x2d8925.device - /dev/disk/by-uuid/BB99-8925... <7>[ 5.593895] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 5.594025] systemd[1]: Reached target slices.target - Slice Units. <7>[ 5.594135] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 5.594239] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 5.594351] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 5.594713] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 5.595254] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 5.595638] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 5.596323] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 5.596643] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 5.596902] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 5.597247] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 5.597604] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 5.597912] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 5.598097] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.598396] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 5.598659] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 5.601980] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 5.604624] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 5.607323] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 5.610084] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 5.616814] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 5.620200] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 5.623883] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 5.626860] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 5.629459] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 5.632458] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 5.637041] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 5.638563] systemd-journald[206]: Collecting audit messages is disabled. <7>[ 5.641390] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 5.647704] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 5.651810] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 5.655381] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 5.655658] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <6>[ 5.658770] pstore: Using crash dump compression: deflate <7>[ 5.660475] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <6>[ 5.662234] pstore: Registered efi_pstore as persistent store backend <7>[ 5.666311] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 5.666483] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.666551] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.670815] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <6>[ 5.671777] fuse: init (API version 7.45) <7>[ 5.678270] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 5.812498] EXT4-fs (nvme0n1p2): re-mounted 54ecf01e-d16e-4105-bf1f-afe53b1d4d6f r/w. <6>[ 5.843344] Adding 8388604k swap on /swap.img. Priority:-1 extents:66 across:400424960k SS <7>[ 5.865299] systemd-journald[206]: Received client request to flush runtime journal. <7>[ 5.880499] systemd-journald[206]: /var/log/journal/2f3359f7a7ee44999e2570762cb4c3cb/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 5.880517] systemd-journald[206]: Rotating system journal. <4>[ 6.581409] nvme nvme0: using unchecked data buffer <6>[ 6.726691] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 6.754576] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <5>[ 6.844832] audit: type=1400 audit(1768878927.255:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=431 comm="apparmor_parser" <5>[ 6.845451] audit: type=1400 audit(1768878927.256:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=434 comm="apparmor_parser" <5>[ 6.845889] audit: type=1400 audit(1768878927.257:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=436 comm="apparmor_parser" <5>[ 6.846171] audit: type=1400 audit(1768878927.257:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=435 comm="apparmor_parser" <5>[ 6.846587] audit: type=1400 audit(1768878927.257:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=433 comm="apparmor_parser" <5>[ 6.847034] audit: type=1400 audit(1768878927.258:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=438 comm="apparmor_parser" <5>[ 6.847305] audit: type=1400 audit(1768878927.258:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=432 comm="apparmor_parser" <6>[ 6.852205] input: Intel HID events as /devices/platform/INTC107B:00/input/input3 <5>[ 6.853255] audit: type=1400 audit(1768878927.264:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=439 comm="apparmor_parser" <5>[ 6.854527] audit: type=1400 audit(1768878927.265:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=440 comm="apparmor_parser" <5>[ 6.857670] audit: type=1400 audit(1768878927.268:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=441 comm="apparmor_parser" <6>[ 6.861541] intel-hid INTC107B:00: platform supports 5 button array <6>[ 6.867562] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4 <3>[ 6.994267] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121 <3>[ 6.994467] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121 <6>[ 7.028275] pci 0000:00:05.0: Setting to D3hot <6>[ 7.039880] pci 0000:00:0b.0: Setting to D3hot <6>[ 7.052123] intel_pmc_core INT33A1:00: initialized <6>[ 7.242205] ACPI: bus type thunderbolt registered <6>[ 7.265797] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 7.282426] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 7.288403] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 7.293926] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43 <6>[ 7.293932] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 7.315471] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 7.326681] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 7.326691] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 7.327849] e1000e 0000:7f:00.0: Disabling ASPM L1 <6>[ 7.328104] e1000e 0000:7f:00.0: enabling device (0000 -> 0002) <6>[ 7.329287] e1000e 0000:7f:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 7.345143] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 7.360715] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 7.382649] e1000e 0000:7f:00.0 0000:7f:00.0 (uninitialized): registered PHC clock <6>[ 7.407422] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402) <6>[ 7.409425] intel_rapl_common: Found RAPL domain package <6>[ 7.409433] intel_rapl_common: Found RAPL domain dram <6>[ 7.448250] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 7.448260] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 7.448262] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 7.448264] RAPL PMU: hw unit of domain dram 2^-14 Joules <6>[ 7.448266] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 7.462928] e1000e 0000:7f:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 68:05:ca:33:a6:7d <6>[ 7.462938] e1000e 0000:7f:00.0 eth0: Intel(R) PRO/1000 Network Connection <6>[ 7.462952] e1000e 0000:7f:00.0 eth0: MAC: 3, PHY: 8, PBA No: E46981-008 <6>[ 7.476787] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 7.477822] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.487389] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 7.569077] block nvme0n1: No UUID available providing old NGUID <6>[ 7.612957] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0 <6>[ 7.624478] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.705427] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin <6>[ 7.731192] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888 <6>[ 7.731198] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716 <6>[ 7.731200] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472 <6>[ 7.977376] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.979623] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.984257] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.138819] intel_rapl_common: Found RAPL domain package <6>[ 8.138825] intel_rapl_common: Found RAPL domain core <6>[ 8.138828] intel_rapl_common: Found RAPL domain dram <6>[ 8.138830] intel_rapl_common: Found RAPL domain psys <6>[ 8.190057] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.212342] loop0: detected capacity change from 0 to 8 <4>[ 8.236152] spi-nor spi0.0: supply vcc not found, using dummy regulator <6>[ 8.245493] e1000e 0000:7f:00.0 enp127s0: renamed from eth0 <6>[ 8.254747] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <5>[ 8.271402] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 8.271436] 0x000000000000-0x000002000000 : "BIOS" <6>[ 8.313615] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.327931] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.589663] Consider using thermal netlink events interface <6>[ 8.724737] hid: raw HID events driver (C) Jiri Kosina <6>[ 8.731910] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 8.761554] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.768337] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.770010] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.771051] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.772077] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.773672] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.774981] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.775260] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.777219] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 8.778084] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.778290] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 8.782056] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.783995] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.786017] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.787280] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.789044] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.790326] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.792316] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.792670] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.794614] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.795210] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 8.797370] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 8.797665] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.801642] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.868855] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.873796] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.880347] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.885630] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.889741] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.894418] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.899469] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.904386] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.909391] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.913132] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.917218] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.920622] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.923449] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.928247] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.933267] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.937983] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.942851] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.947492] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.952106] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.958307] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.963280] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 10.506036] typec port0: bound usb3-port1 (ops connector_ops) <6>[ 10.506067] typec port0: bound usb2-port1 (ops connector_ops) <6>[ 10.506094] typec port0: bound usb4_port1 (ops connector_ops [thunderbolt]) <6>[ 10.672149] e1000e 0000:7f:00.0 enp127s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None <6>[ 11.519799] typec port1: bound usb3-port2 (ops connector_ops) <6>[ 11.519832] typec port1: bound usb2-port2 (ops connector_ops) <6>[ 11.519858] typec port1: bound usb4_port3 (ops connector_ops [thunderbolt]) <6>[ 19.029566] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 19.032614] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 37.077299] systemd-journald[206]: /var/log/journal/2f3359f7a7ee44999e2570762cb4c3cb/user-1000.journal: Journal file uses a different sequence number ID, rotating. <6>[ 41.673105] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <7>[ 52.718940] [IGT] xe_module_load: executing <4>[ 52.719033] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 52.729008] [IGT] xe_module_load: starting subtest load <5>[ 53.014739] Setting dangerous option force_probe - tainting kernel <6>[ 53.018146] xe 0000:00:02.0: vgaarb: deactivate vga console <6>[ 53.019892] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7>[ 53.019904] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7>[ 53.020039] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7>[ 53.020147] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7>[ 53.021977] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7>[ 53.022107] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7>[ 53.022210] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 53.022336] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7>[ 53.022451] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7>[ 53.022541] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7>[ 53.022627] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7>[ 53.022711] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7>[ 53.022792] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7>[ 53.022889] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 53.022974] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7>[ 53.023080] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7>[ 53.023184] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7>[ 53.023300] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7>[ 53.023406] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7>[ 53.023515] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7>[ 53.023623] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7>[ 53.023728] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7>[ 53.023828] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7>[ 53.023928] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7>[ 53.024029] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 53.024128] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 53.024239] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7>[ 53.024340] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 53.024440] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 53.024539] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 53.024639] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7>[ 53.024739] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 53.024838] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 53.024935] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 53.025030] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7>[ 53.025124] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 53.025231] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 53.025323] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 53.025412] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7>[ 53.025502] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 53.025590] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 53.025678] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 53.025765] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7>[ 53.025850] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 53.025933] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 53.026018] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 53.026109] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7>[ 53.026455] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7>[ 53.026568] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7>[ 53.026676] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7>[ 53.026779] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7>[ 53.026874] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7>[ 53.026966] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7>[ 53.027061] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7>[ 53.027161] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7>[ 53.027257] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7>[ 53.027364] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7>[ 53.027467] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7>[ 53.027565] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7>[ 53.027663] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7>[ 53.027756] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7>[ 53.027841] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7>[ 53.027922] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 53.028004] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7>[ 53.028090] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7>[ 53.028179] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 53.028281] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 53.028383] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 53.028478] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7>[ 53.028555] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 53.028640] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 53.028730] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 53.028819] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 53.028910] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7>[ 53.029024] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 53.029237] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7>[ 53.029376] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 53.029514] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7>[ 53.029685] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7>[ 53.029809] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7>[ 53.029905] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 53.030006] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 53.030148] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <6>[ 53.030255] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem <7>[ 53.030270] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7>[ 53.030386] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7>[ 53.030486] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7>[ 53.030588] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7>[ 53.030884] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7>[ 53.031284] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7>[ 53.031986] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7>[ 53.032139] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7>[ 53.032242] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7>[ 53.032334] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7>[ 53.032419] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7>[ 53.032502] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7>[ 53.032585] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7>[ 53.032666] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7>[ 53.032751] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7>[ 53.032839] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7>[ 53.032918] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7>[ 53.033002] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7>[ 53.033079] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7>[ 53.033152] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7>[ 53.034170] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7>[ 53.034299] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 53.034408] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 53.034511] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7>[ 53.034612] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7>[ 53.034711] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7>[ 53.034817] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7>[ 53.034914] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7>[ 53.035020] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 53.035123] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7>[ 53.035225] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 53.035318] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7>[ 53.035409] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 53.035499] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7>[ 53.035594] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7>[ 53.035685] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7>[ 53.035777] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 53.035874] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7>[ 53.035979] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 53.036077] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7>[ 53.036185] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 53.036284] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7>[ 53.036378] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7>[ 53.036468] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7>[ 53.036553] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 53.036636] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7>[ 53.036718] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 53.036800] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7>[ 53.036882] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 53.037001] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7>[ 53.040114] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available. <7>[ 53.044923] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 53.045072] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7>[ 53.045186] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7>[ 53.045344] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:387:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 53.045517] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:387:DDI A/PHY A] <7>[ 53.045695] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7>[ 53.045981] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7>[ 53.046128] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7>[ 53.046325] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 53.046466] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7>[ 53.046601] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 53.046742] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7>[ 53.046871] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7>[ 53.046999] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 53.047153] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:387:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 53.047399] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 53.047536] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 53.047657] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 53.047790] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 53.047909] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <6>[ 53.048003] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7>[ 53.048060] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 53.048271] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 53.049670] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turning VDD on <7>[ 53.049831] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 53.050949] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 53.051358] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7>[ 53.051787] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7>[ 53.052342] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7>[ 53.052676] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7>[ 53.054399] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 53.063565] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 53.063576] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.063578] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.063579] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 53.063582] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 53.063584] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.063586] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD monitor <5>[ 53.063591] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.063592] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD size 20, SAD count 0 <5>[ 53.063595] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.063641] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.063642] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.063644] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.063660] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:388:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.063793] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:388:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.064100] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:388:eDP-1] Performing OUI wait (0 ms) <7>[ 53.064457] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:388:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 53.064593] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:388:eDP-1] DRRS type: seamless <7>[ 53.064749] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:388:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 53.064880] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:388:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 53.065048] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 53.065148] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 53.065245] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 53.065358] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 53.065465] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 53.065600] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 53.065851] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:396:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 53.066072] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 53.066200] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:396:DDI TC1/PHY TC1] <7>[ 53.066640] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:408:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 53.066789] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 53.066910] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:408:DDI TC2/PHY TC2] <7>[ 53.067159] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:416:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 53.067307] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 53.067434] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:416:DDI TC3/PHY TC3] <7>[ 53.067941] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:148:pipe A] hw state readout: enabled <7>[ 53.068060] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:266:pipe B] hw state readout: disabled <7>[ 53.068182] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:384:pipe C] hw state readout: disabled <7>[ 53.068325] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: enabled, pipe A <7>[ 53.068442] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7>[ 53.068560] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7>[ 53.068673] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7>[ 53.068767] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7>[ 53.068866] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7>[ 53.068964] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] hw state readout: disabled, pipe B <7>[ 53.069056] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] hw state readout: disabled, pipe B <7>[ 53.069141] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] hw state readout: disabled, pipe B <7>[ 53.069233] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] hw state readout: disabled, pipe B <7>[ 53.069335] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] hw state readout: disabled, pipe B <7>[ 53.069439] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] hw state readout: disabled, pipe B <7>[ 53.069541] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] hw state readout: disabled, pipe C <7>[ 53.069642] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] hw state readout: disabled, pipe C <7>[ 53.069734] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] hw state readout: disabled, pipe C <7>[ 53.069818] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] hw state readout: disabled, pipe C <7>[ 53.069896] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] hw state readout: disabled, pipe C <7>[ 53.069979] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] hw state readout: disabled, pipe C <7>[ 53.070760] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 53.070882] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:387:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 53.070974] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 53.071067] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:396:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 53.071155] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:398:DP-MST A] hw state readout: disabled, pipe A <7>[ 53.071268] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DP-MST B] hw state readout: disabled, pipe B <7>[ 53.071370] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:400:DP-MST C] hw state readout: disabled, pipe C <7>[ 53.071473] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 53.071574] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:408:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 53.071661] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:410:DP-MST A] hw state readout: disabled, pipe A <7>[ 53.071743] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DP-MST B] hw state readout: disabled, pipe B <7>[ 53.071824] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:412:DP-MST C] hw state readout: disabled, pipe C <7>[ 53.071907] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 53.071985] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:416:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 53.072059] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:418:DP-MST A] hw state readout: disabled, pipe A <7>[ 53.072136] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DP-MST B] hw state readout: disabled, pipe B <7>[ 53.072249] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:420:DP-MST C] hw state readout: disabled, pipe C <7>[ 53.072370] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:388:eDP-1] hw state readout: enabled <7>[ 53.072490] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:397:DP-1] hw state readout: disabled <7>[ 53.072604] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:409:DP-2] hw state readout: disabled <7>[ 53.072696] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:417:DP-3] hw state readout: disabled <7>[ 53.072842] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 173855 kHz <7>[ 53.072935] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7>[ 53.073028] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7>[ 53.073117] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7>[ 53.073223] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7>[ 53.073315] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz <7>[ 53.073407] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:148:pipe A] min_cdclk 173855 kHz <7>[ 53.073488] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] min_cdclk 0 kHz <7>[ 53.073562] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] min_cdclk 0 kHz <7>[ 53.073636] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] min_cdclk 0 kHz <7>[ 53.073710] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] min_cdclk 0 kHz <7>[ 53.073782] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] min_cdclk 0 kHz <7>[ 53.073856] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] min_cdclk 0 kHz <7>[ 53.073932] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:266:pipe B] min_cdclk 0 kHz <7>[ 53.074007] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] min_cdclk 0 kHz <7>[ 53.074087] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] min_cdclk 0 kHz <7>[ 53.074191] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] min_cdclk 0 kHz <7>[ 53.074284] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] min_cdclk 0 kHz <7>[ 53.074376] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] min_cdclk 0 kHz <7>[ 53.074455] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] min_cdclk 0 kHz <7>[ 53.074526] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:384:pipe C] min_cdclk 0 kHz <7>[ 53.074746] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:148:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 53.074849] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:266:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 53.074947] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:384:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 53.075042] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1 <7>[ 53.075177] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7>[ 53.075312] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7>[ 53.075475] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 53.075608] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A <7>[ 53.075861] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:148:pipe A] enable: yes [setup_hw_state] <7>[ 53.075976] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 53.076093] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 53.076220] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 53.076345] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 53.076461] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 53.076564] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 53.076665] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64 <7>[ 53.076769] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 53.076871] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 53.076968] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 53.077073] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 53.077190] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 53.077309] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 53.077424] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 53.077514] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 53.077604] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96 <7>[ 53.077700] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 53.077798] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.077902] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.078003] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 53.078134] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.078249] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 53.078365] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 53.078473] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 53.078567] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 53.078659] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 53.078750] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 53.078835] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x41eb0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 53.078926] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 53.079023] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 53.079135] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 53.079250] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.079353] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.079447] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.079539] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 53.079629] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 53.079719] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.079804] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.079885] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.079969] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 53.080093] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 53.080197] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:266:pipe B] enable: no [setup_hw_state] <7>[ 53.080300] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:384:pipe C] enable: no [setup_hw_state] <7>[ 53.080643] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:148:pipe A][PLANE:33:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 53.080753] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:33:plane 1A] on [CRTC:148:pipe A] <6>[ 53.086303] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7>[ 53.089911] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x003543f7 <7>[ 53.090047] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7>[ 53.090137] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7>[ 53.090217] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 53.090293] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000008d2 <7>[ 53.090367] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 53.090439] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 53.090509] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 53.090578] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 53.090646] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 53.090713] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 53.090795] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 53.090883] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 53.090966] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 53.091049] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 53.091175] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7>[ 53.101567] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 53.102425] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 53.102681] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000000fb <7>[ 53.102808] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000000fb <7>[ 53.102914] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7>[ 53.103001] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7>[ 53.103078] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6>[ 53.743711] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6>[ 53.743715] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6>[ 53.743716] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7>[ 53.743889] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7>[ 53.744056] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 53.744185] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 53.744298] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 53.744428] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7>[ 53.744544] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7>[ 53.744672] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7>[ 53.744765] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 53.744857] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 53.744961] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 53.745940] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7>[ 53.746054] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7>[ 53.746175] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7>[ 53.746274] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7>[ 53.746369] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7>[ 53.746463] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7>[ 53.746550] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7>[ 53.746635] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7>[ 53.746725] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7>[ 53.746816] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7>[ 53.746918] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7>[ 53.747018] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7>[ 53.747110] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7>[ 53.747191] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7>[ 53.747269] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7>[ 53.747348] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7>[ 53.747428] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7>[ 53.747507] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7>[ 53.747588] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7>[ 53.747670] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7>[ 53.747763] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7>[ 53.747851] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7>[ 53.747951] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7>[ 53.748046] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7>[ 53.748134] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7>[ 53.748208] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7>[ 53.748289] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7>[ 53.748371] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7>[ 53.748451] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7>[ 53.748530] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7>[ 53.748608] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7>[ 53.748693] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7>[ 53.748775] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7>[ 53.748868] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7>[ 53.748960] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7>[ 53.749056] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7>[ 53.749141] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7>[ 53.749227] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7>[ 53.749310] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7>[ 53.749392] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7>[ 53.749746] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7>[ 53.749832] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7>[ 53.749920] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7>[ 53.750009] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7>[ 53.750314] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7>[ 53.750385] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7>[ 53.750455] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7>[ 53.750526] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7>[ 53.750901] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7>[ 53.750993] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7>[ 53.751093] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7>[ 53.751180] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7>[ 53.751260] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7>[ 53.751332] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7>[ 53.751403] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7>[ 53.751906] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7>[ 53.752057] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x003543f7 <7>[ 53.752161] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7>[ 53.752261] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7>[ 53.752356] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 53.752429] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000008d2 <7>[ 53.752500] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 53.752571] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 53.752662] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 53.752755] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 53.752843] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 53.752927] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 53.753011] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 53.753081] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 53.753152] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 53.753247] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7>[ 53.753430] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7>[ 53.754638] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xd19000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 53.757432] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7>[ 53.773534] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7>[ 53.784744] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 53.785099] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 53.786116] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7>[ 53.786267] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7>[ 53.786370] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7>[ 53.786458] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7>[ 53.786541] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7>[ 53.786619] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7>[ 53.786694] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7>[ 53.786770] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7>[ 53.786848] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000 <7>[ 53.790133] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7>[ 53.790224] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606 <7>[ 53.790307] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7>[ 53.792709] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7>[ 53.792816] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6>[ 53.796705] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7>[ 53.800878] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00df63f7 <7>[ 53.801012] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 53.801107] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7>[ 53.801190] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 53.801271] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00001e16 <7>[ 53.801349] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 53.801424] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 53.801496] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 53.801567] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 53.801637] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 53.801713] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 53.801798] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 53.801884] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 53.801967] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6>[ 53.803064] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6>[ 53.805018] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6>[ 53.806021] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7>[ 53.806115] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 53.806227] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7>[ 53.827252] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 53.827725] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 53.827960] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7>[ 53.828171] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7>[ 53.828408] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7>[ 53.828603] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7>[ 53.828789] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6>[ 53.828970] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6>[ 53.828972] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6>[ 53.828974] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6>[ 53.828976] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6>[ 53.828978] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6>[ 53.828979] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6>[ 53.828981] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6>[ 53.828983] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6>[ 53.828985] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6>[ 53.828986] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7>[ 53.829074] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7>[ 53.829394] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7>[ 53.829662] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7>[ 53.831106] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7>[ 53.831312] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7>[ 53.831494] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7>[ 53.831666] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7>[ 53.831837] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7>[ 53.831998] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7>[ 53.832167] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7>[ 53.832330] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7>[ 53.832478] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7>[ 53.832623] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7>[ 53.832769] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7>[ 53.832913] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7>[ 53.833053] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7>[ 53.833205] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7>[ 53.833354] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7>[ 53.833504] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7>[ 53.833627] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7>[ 53.833744] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7>[ 53.833859] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7>[ 53.833985] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7>[ 53.834116] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7>[ 53.834235] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7>[ 53.834349] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7>[ 53.834449] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7>[ 53.834550] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7>[ 53.834646] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7>[ 53.834742] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7>[ 53.834838] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7>[ 53.834932] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7>[ 53.835044] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7>[ 53.835170] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7>[ 53.835645] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7>[ 53.835754] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7>[ 53.835859] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7>[ 53.836287] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7>[ 53.836389] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7>[ 53.836488] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7>[ 53.837044] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7>[ 53.837177] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00df63f7 <7>[ 53.837270] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 53.837359] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7>[ 53.837445] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 53.837529] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00001e16 <7>[ 53.837611] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 53.837692] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 53.837772] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 53.837849] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 53.837924] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 53.837997] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 53.838084] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 53.838156] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 53.838225] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7>[ 53.838312] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7>[ 53.838417] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7>[ 53.839698] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1984000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 53.860813] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056) <7>[ 53.882280] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 53.882884] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 53.884420] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7>[ 53.884716] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 53.888103] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7>[ 53.888395] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 53.891789] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7>[ 53.892041] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 53.934251] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7>[ 53.935325] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 53.935758] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 53.936241] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 53.936678] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 53.937712] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7>[ 53.938110] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7>[ 53.938560] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7>[ 53.940587] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 0: start 0x90008 <7>[ 53.941134] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 1: start 0x90108 <7>[ 53.941618] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 2: start 0x90208 <7>[ 53.942153] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 3: start 0x90308 <7>[ 53.942618] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 4: start 0x903c8 <7>[ 53.943099] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 0: start 0x98008 <7>[ 53.943538] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 1: start 0x98108 <7>[ 53.943977] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 2: start 0x98208 <7>[ 53.944509] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 3: start 0x98308 <7>[ 53.944903] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 4: start 0x983c8 <7>[ 53.945382] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 0: start 0x52008 <7>[ 53.945799] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 1: start 0x52108 <7>[ 53.946181] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 2: start 0x52208 <7>[ 53.946508] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 3: start 0x52308 <7>[ 53.946855] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 4: start 0x523c8 <7>[ 53.947682] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 53.947987] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:148:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 53.948274] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7>[ 53.948617] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:266:pipe B] enable: no [fastset] <7>[ 53.948958] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:384:pipe C] enable: no [fastset] <7>[ 53.950371] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7>[ 53.950577] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7>[ 53.966070] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:266:pipe B] <7>[ 53.966548] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:384:pipe C] <7>[ 53.982678] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:388:eDP-1] adding connector to sysfs <7>[ 53.989819] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:388:eDP-1] backlight device intel_backlight registered <7>[ 53.990477] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:388:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 53.990970] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:388:eDP-1] Panel prepare <7>[ 53.992261] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 53.994847] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:388:eDP-1] generating connector hotplug event <7>[ 53.994964] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:397:DP-1] adding connector to sysfs <7>[ 53.995926] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7>[ 53.996886] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:397:DP-1] generating connector hotplug event <7>[ 53.996940] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:409:DP-2] adding connector to sysfs <7>[ 53.997521] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7>[ 53.998730] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:409:DP-2] generating connector hotplug event <7>[ 53.998793] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:417:DP-3] adding connector to sysfs <7>[ 53.999465] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 54.000877] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:417:DP-3] generating connector hotplug event <6>[ 54.000929] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7>[ 54.000998] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6>[ 54.016590] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 54.019937] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 54.021402] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 54.021631] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 54.021636] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 54.021580] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7>[ 54.023272] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:397:DP-1] <7>[ 54.023499] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.023723] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:397:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 54.023769] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:33:plane 1A] no fb, skipping <7>[ 54.023912] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:409:DP-2] <7>[ 54.023930] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:266:pipe B] not active, skipping <7>[ 54.024076] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:384:pipe C] not active, skipping <7>[ 54.024105] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.024220] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7>[ 54.024267] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:409:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 54.024422] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:417:DP-3] <7>[ 54.024607] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 54.024618] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.024778] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:417:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 54.024932] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 54.024957] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] <7>[ 54.024970] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:388:eDP-1] <7>[ 54.026700] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 54.027113] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 54.027262] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 54.027383] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 54.027786] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 54.027796] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.027799] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.027801] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 54.027805] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 54.027808] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.027810] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD monitor <5>[ 54.027818] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.027820] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD size 20, SAD count 0 <5>[ 54.027823] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.027873] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] VRR capable: yes <7>[ 54.027996] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 54.028107] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 54.028812] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] status updated from unknown to connected <7>[ 54.029231] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <5>[ 54.029900] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.029906] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.029908] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.029995] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] probed modes: <7>[ 54.030007] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.030012] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.030017] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] <7>[ 54.030024] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:397:DP-1] <7>[ 54.030262] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] disconnected <7>[ 54.030270] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] <7>[ 54.030274] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:409:DP-2] <7>[ 54.031325] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] disconnected <7>[ 54.031335] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] <7>[ 54.031339] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:417:DP-3] <7>[ 54.031510] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] disconnected <7>[ 54.031515] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] enabled? yes <7>[ 54.031520] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:397:DP-1] enabled? no <7>[ 54.031523] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:409:DP-2] enabled? no <7>[ 54.031526] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:417:DP-3] enabled? no <7>[ 54.031801] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 54.031838] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] found preferred mode: 2880x1800 <7>[ 54.031842] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 54.031875] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:148:pipe A] desired mode 2880x1800 set (0,0) <7>[ 54.032024] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 54.032042] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <6>[ 54.040317] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7>[ 54.041138] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7>[ 54.059548] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000 <7>[ 54.059696] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:388:eDP-1] set backlight level = 13892 <7>[ 54.060702] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01da5000 <6>[ 54.063159] fbcon: xedrmfb (fb0) is primary device <7>[ 54.064046] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7>[ 54.067217] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:388:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 54.067380] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:387:DDI A/PHY A][CRTC:148:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 54.067507] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7>[ 54.067639] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:148:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 54.067785] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:387:DDI A/PHY A] [CRTC:148:pipe A] <7>[ 54.067930] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288) <7>[ 54.068070] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10 <7>[ 54.068209] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7>[ 54.068346] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes, <7>[ 54.068484] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1, <7>[ 54.068620] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 54.068777] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state: <7>[ 54.068911] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21 <7>[ 54.069044] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 54.069175] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 54.069308] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 54.069437] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 54.069564] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 54.069715] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7>[ 54.069847] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no, <7>[ 54.069975] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 54.070103] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state: <7>[ 54.070227] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21 <7>[ 54.070352] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 54.070477] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 54.070603] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 54.070750] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 54.070894] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 54.071018] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 54.071147] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000) <7>[ 54.071261] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0) <7>[ 54.071367] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:148:pipe A] fastset requirement not met, forcing full modeset <7>[ 54.072200] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7>[ 54.072321] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 54.072435] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7>[ 54.072534] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7>[ 54.072630] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7>[ 54.072734] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.072835] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.072932] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.073014] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.073094] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.073173] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.073251] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.073338] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.073419] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.073499] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.073573] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.073681] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.073770] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.073859] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.073948] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.074044] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.074153] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:143:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.074255] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:143:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.074346] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:143:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.074421] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:143:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.074575] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:148:pipe A] data rate 1390840 num active planes 1 <7>[ 54.074742] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7>[ 54.074896] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7>[ 54.075030] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 54.075140] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 54.075257] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7>[ 54.075452] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:148:pipe A] enable: yes [modeset] <7>[ 54.075600] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 54.075735] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 54.075866] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 54.075987] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 54.076094] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 54.076196] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 54.076291] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7>[ 54.076385] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 54.076485] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 54.076622] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 54.076740] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 54.076854] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 54.076966] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 54.077080] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7>[ 54.077186] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7>[ 54.077283] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7>[ 54.077369] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7>[ 54.077451] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7>[ 54.077561] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7>[ 54.077669] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 54.077778] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 54.077878] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7>[ 54.077972] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 54.078069] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.078156] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.078242] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 54.078330] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.078416] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 54.078500] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 54.078630] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 54.078738] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 54.078844] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 54.078947] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 54.079035] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 54.079123] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 54.079211] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 54.079295] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 54.079379] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.079463] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.079582] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.079692] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 54.079803] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 54.079912] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.080020] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.080127] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.080232] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 54.080336] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 54.080437] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:389] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 54.080565] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 54.080667] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 54.080771] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7>[ 54.080870] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7>[ 54.080970] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7>[ 54.081067] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7>[ 54.081158] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7>[ 54.083244] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7>[ 54.083355] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7>[ 54.287825] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:388:eDP-1] set backlight PWM = 0 <7>[ 54.289373] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7>[ 54.299847] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turn panel power off <7>[ 54.300206] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 54.300373] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 54.300744] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:387:DDI A/PHY A] - short <7>[ 54.300906] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 54.352324] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 54.352678] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 54.352857] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7>[ 54.352841] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:387:DDI A/PHY A] <7>[ 54.353017] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:387:DDI A/PHY A] - short <7>[ 54.353870] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x1341b072) <7>[ 54.353868] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:387:DDI A/PHY A] <7>[ 54.354543] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:387:DDI A/PHY A] <7>[ 54.354836] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:396:DDI TC1/PHY TC1] <7>[ 54.355109] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:398:DP-MST A] <7>[ 54.355390] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DP-MST B] <7>[ 54.355644] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:400:DP-MST C] <7>[ 54.355951] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:408:DDI TC2/PHY TC2] <7>[ 54.356201] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:410:DP-MST A] <7>[ 54.356474] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DP-MST B] <7>[ 54.356715] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:412:DP-MST C] <7>[ 54.356959] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DDI TC3/PHY TC3] <7>[ 54.357187] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:418:DP-MST A] <7>[ 54.357437] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DP-MST B] <7>[ 54.357711] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:420:DP-MST C] <7>[ 54.357988] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 54.359449] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turn panel power on <7>[ 54.359832] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 wait for panel power cycle (493 ms remaining) <7>[ 54.388517] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 54.388963] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:387:DDI A/PHY A] - long <7>[ 54.389379] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 54.389828] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:387:DDI A/PHY A] <7>[ 54.475020] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7>[ 54.847053] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 54.877898] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 54.878534] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 54.879172] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 54.914583] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 54.914973] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:387:DDI A/PHY A] - long <7>[ 54.915364] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 54.915773] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:387:DDI A/PHY A] <7>[ 55.059536] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.059551] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.059501] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.087172] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 55.089551] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turning VDD on <7>[ 55.090062] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 55.092483] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 55.093753] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 55.094803] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7>[ 55.096215] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 55.097496] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 55.098662] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 55.099065] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7>[ 55.100568] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 55.100995] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7>[ 55.102012] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7>[ 55.102740] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7>[ 55.103245] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7>[ 55.103788] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:388:eDP-1] set backlight PWM = 13892 <7>[ 55.119725] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7>[ 55.122339] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:388:eDP-1] <7>[ 55.122980] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:148:pipe A] <7>[ 55.124606] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 55.126244] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <6>[ 55.128221] Console: switching to colour frame buffer device 180x56 <6>[ 55.175141] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7>[ 55.175228] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7>[ 55.175942] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7>[ 55.176540] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7>[ 55.177109] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7>[ 55.177596] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7>[ 55.178146] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7>[ 55.178605] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7>[ 55.179090] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7>[ 55.179575] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7>[ 55.180046] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7>[ 55.180495] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7>[ 55.180951] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7>[ 55.181388] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7>[ 55.181781] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7>[ 55.182216] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7>[ 55.182636] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7>[ 55.183023] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7>[ 55.183401] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7>[ 55.183730] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7>[ 55.184144] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7>[ 55.184494] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7>[ 55.184776] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7>[ 55.185946] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7>[ 55.186242] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7>[ 55.186735] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7>[ 55.187053] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7>[ 55.187368] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7>[ 55.187623] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 55.187884] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.188109] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.189026] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 55.190150] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 55.191114] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 55.193070] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7>[ 55.194361] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 55.194368] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 55.204770] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 55.204926] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <6>[ 55.204927] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7>[ 55.206372] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] <7>[ 55.206257] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7>[ 55.206406] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:388:eDP-1] <7>[ 55.206855] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 55.207736] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 55.208388] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 55.208844] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.209315] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.210236] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 55.210246] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.210250] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.210251] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 55.210255] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 55.210257] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.210259] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD monitor <5>[ 55.210269] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.210271] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD size 20, SAD count 0 <5>[ 55.210274] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.210310] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] VRR capable: yes <7>[ 55.210502] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 55.210653] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5>[ 55.211451] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.211454] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.211456] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.211568] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] probed modes: <7>[ 55.211580] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 55.211585] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 55.211590] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] <7>[ 55.211596] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:397:DP-1] <7>[ 55.211788] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.212169] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.212663] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 55.212975] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.213103] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] disconnected <7>[ 55.213108] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] <7>[ 55.213112] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:409:DP-2] <7>[ 55.213257] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.213385] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] disconnected <7>[ 55.213389] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] <7>[ 55.213392] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:417:DP-3] <7>[ 55.213529] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.213632] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] disconnected <7>[ 55.213635] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] enabled? yes <7>[ 55.213639] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:397:DP-1] enabled? no <7>[ 55.213642] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:409:DP-2] enabled? no <7>[ 55.213645] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:417:DP-3] enabled? no <7>[ 55.213753] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 55.213779] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] found preferred mode: 2880x1800 <7>[ 55.213782] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 55.213824] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:148:pipe A] desired mode 2880x1800 set (0,0) <7>[ 55.214639] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7>[ 55.215345] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 55.215352] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 55.221104] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 55.221330] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 55.237398] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 55.253070] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 55.253092] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 55.253378] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] <7>[ 55.253392] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:388:eDP-1] <7>[ 55.253678] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.253968] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.254392] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 55.256007] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 55.256773] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 55.256896] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.257009] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.257348] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 55.257358] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.257361] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.257362] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 55.257366] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 55.257369] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.257371] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD monitor <5>[ 55.257380] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.257382] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD size 20, SAD count 0 <5>[ 55.257385] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.257411] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] VRR capable: yes <7>[ 55.257518] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 55.257662] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5>[ 55.258282] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.258286] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.258288] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.258362] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] probed modes: <7>[ 55.258372] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 55.258377] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 55.258382] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] <7>[ 55.258387] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:397:DP-1] <7>[ 55.258565] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] disconnected <7>[ 55.258570] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] <7>[ 55.258574] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:409:DP-2] <7>[ 55.258705] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] disconnected <7>[ 55.258709] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] <7>[ 55.258712] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:417:DP-3] <7>[ 55.258836] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] disconnected <7>[ 55.258840] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] enabled? yes <7>[ 55.258844] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:397:DP-1] enabled? no <7>[ 55.258847] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:409:DP-2] enabled? no <7>[ 55.258850] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:417:DP-3] enabled? no <7>[ 55.258983] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 55.259009] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] found preferred mode: 2880x1800 <7>[ 55.259013] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 55.259051] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:148:pipe A] desired mode 2880x1800 set (0,0) <7>[ 55.260414] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 55.260601] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 55.262342] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.262501] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.262621] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.262729] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.262836] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.262943] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.263050] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.263157] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.263262] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.263366] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.263516] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.263623] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.263727] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.263831] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.263936] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.264040] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.264143] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.264246] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.264349] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.264463] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.264569] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.264673] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.264775] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.264878] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.264981] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.265085] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.265190] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.265300] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.265404] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.265513] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.265616] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.265719] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.265821] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.265925] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.266028] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.266130] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.270339] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <6>[ 55.274321] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 55.279043] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 55.281059] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 55.283122] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 55.321087] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 55.321482] [IGT] xe_module_load: finished subtest load, SUCCESS <7>[ 55.321960] [IGT] xe_module_load: exiting, ret=0 <7>[ 55.359119] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.359612] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.360036] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 56.257333] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.257472] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.257483] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.456138] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 57.776504] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turning VDD off <7>[ 57.777058] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067