Results for igt@kms_flip_event_leak@basic

Result: Pass

i915_display_info1 igt_runner1 results1.json results1-xe-load.json guc_logs1.tar i915_display_info_post_exec1 boot1 dmesg1

DetailValue
Duration 2.96 seconds
Hostname
shard-lnl-4
Igt-Version
IGT-Version: 2.3-gc45426aaf (x86_64) (Linux: 6.19.0-rc5-lgci-xe-xe-4408-ce23d0a333e80437c+ x86_64)
Out
Using IGT_SRANDOM=1768807823 for randomisation
Opened device: /dev/dri/card0
Starting subtest: basic
Starting dynamic subtest: pipe-A-eDP-1
Dynamic subtest pipe-A-eDP-1: SUCCESS (0.537s)
Starting dynamic subtest: pipe-B-eDP-1
Dynamic subtest pipe-B-eDP-1: SUCCESS (1.237s)
Starting dynamic subtest: pipe-C-eDP-1
Dynamic subtest pipe-C-eDP-1: SUCCESS (1.177s)
Subtest basic: SUCCESS (2.959s)
Err
Starting subtest: basic
Starting dynamic subtest: pipe-A-eDP-1
Dynamic subtest pipe-A-eDP-1: SUCCESS (0.537s)
Starting dynamic subtest: pipe-B-eDP-1
Dynamic subtest pipe-B-eDP-1: SUCCESS (1.237s)
Starting dynamic subtest: pipe-C-eDP-1
Dynamic subtest pipe-C-eDP-1: SUCCESS (1.177s)
Subtest basic: SUCCESS (2.959s)
Dmesg
<6> [489.566347] Console: switching to colour dummy device 80x25
<6> [489.566624] [IGT] kms_flip_event_leak: executing
<7> [489.571840] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]
<7> [489.571849] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]
<7> [489.571995] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [489.572085] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected
<7> [489.572296] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]
<7> [489.572298] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]
<7> [489.572409] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [489.572588] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected
<7> [489.572856] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]
<7> [489.572859] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]
<7> [489.572968] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [489.573047] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected
<7> [489.573289] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]
<7> [489.573292] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]
<7> [489.573730] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [489.574045] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [489.574150] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [489.574253] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [489.574370] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5> [489.574374] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [489.574375] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [489.574376] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00
<7> [489.574378] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5> [489.574380] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [489.574382] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor
<5> [489.574384] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [489.574385] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0
<5> [489.574387] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [489.574397] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes
<7> [489.574505] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [489.574615] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5> [489.575148] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [489.575150] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [489.575152] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [489.575210] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:
<7> [489.575214] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [489.575218] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [489.575230] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]
<7> [489.575234] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]
<7> [489.575379] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected
<7> [489.575390] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]
<7> [489.575393] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]
<7> [489.575521] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected
<7> [489.575531] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]
<7> [489.575533] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]
<7> [489.575659] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected
<6> [489.576013] [IGT] kms_flip_event_leak: starting subtest basic
<6> [489.577311] [IGT] kms_flip_event_leak: starting dynamic subtest pipe-A-eDP-1
<7> [489.588296] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:430]
<7> [489.588544] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [489.588685] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [489.696985] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:149:pipe A]
<7> [489.697057] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:391:eDP-1]
<7> [489.718395] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B]
<7> [489.723818] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]
<7> [489.748737] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe A
<7> [489.771787] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [489.771942] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [489.772058] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [489.772068] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [489.774613] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [489.774647] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:427] is removed
<7> [489.774646] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [489.774676] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0
<7> [489.774774] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [489.774783] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [489.774853] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [489.774919] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [489.774983] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [489.775100] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [489.775192] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [489.775279] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [489.775364] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [489.775446] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [489.775560] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [489.782278] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2
<7> [489.820063] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:149:pipe A]
<7> [489.820285] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no)
<7> [489.820777] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [489.821195] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [489.821629] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0)
<7> [489.822023] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)
<7> [489.822412] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [489.822906] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [489.823296] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [489.823701] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [489.824138] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [489.824510] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [489.824915] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [489.825270] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [489.825655] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [489.826043] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)
<7> [489.826390] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [489.826782] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [489.827161] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)
<7> [489.827520] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)
<7> [489.827833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [489.828143] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [489.828439] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [489.828774] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [489.829056] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [489.829320] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [489.829603] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [489.829849] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)
<7> [489.830103] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [489.830367] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [489.830633] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)
<7> [489.830854] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)
<7> [489.831078] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [489.831290] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [489.831515] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [489.831518] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [489.831724] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [489.831835] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [489.831928] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)
<7> [489.832093] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [489.832161] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)
<7> [489.832360] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0)
<7> [489.832610] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset
<7> [489.832791] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0
<7> [489.833037] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [489.833200] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0
<7> [489.833381] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0
<7> [489.833578] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz
<7> [489.833756] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [489.833925] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz
<7> [489.834091] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [489.834287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset]
<7> [489.834461] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no
<7> [489.834612] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no
<7> [489.834757] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no
<7> [489.834902] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no
<7> [489.835046] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no
<7> [489.835202] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no
<7> [489.835403] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [489.835558] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [489.835829] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [489.835964] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [490.042752] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0
<7> [490.043320] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7> [490.048866] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off
<7> [490.049255] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [490.049295] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [490.049684] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [490.049775] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<7> [490.100875] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [490.101260] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A]
<7> [490.101509] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [490.101753] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [490.102165] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<7> [490.102528] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [490.102682] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [490.102962] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [490.103419] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]
<7> [490.103779] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]
<7> [490.104083] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]
<7> [490.104408] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]
<7> [490.104773] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]
<7> [490.105104] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]
<7> [490.105380] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]
<7> [490.105709] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]
<7> [490.106040] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]
<7> [490.106323] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]
<7> [490.106634] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]
<7> [490.106901] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]
<7> [490.107164] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]
<7> [490.107427] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [490.107915] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [490.108229] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)
<7> [490.108512] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [490.108983] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [490.109462] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]
<7> [490.109788] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [490.110193] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [490.110569] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384
<6> [490.115105] [IGT] kms_flip_event_leak: finished subtest pipe-A-eDP-1, SUCCESS
<6> [490.117207] [IGT] kms_flip_event_leak: starting dynamic subtest pipe-B-eDP-1
<7> [490.129138] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [490.129282] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [490.129352] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:429]
<7> [490.129387] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [490.129523] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [490.129706] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [490.130373] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:149:pipe A]
<7> [490.131890] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B]
<7> [490.131907] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:391:eDP-1]
<7> [490.131956] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [490.132066] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:268:pipe B] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [490.132156] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [490.132249] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [490.132337] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:268:pipe B]
<7> [490.132423] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.enable (expected no, found yes)
<7> [490.132544] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes)
<7> [490.132655] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1)
<7> [490.132760] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in lane_count (expected 0, found 4)
<7> [490.132850] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)
<7> [490.132939] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [490.133027] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [490.133113] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [490.133197] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [490.133274] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [490.133351] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [490.133443] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [490.133545] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [490.133647] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [490.133745] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)
<7> [490.133838] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [490.133933] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [490.134018] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)
<7> [490.134102] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)
<7> [490.134182] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [490.134257] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [490.134331] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [490.134405] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [490.134548] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [490.134632] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [490.134712] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [490.134785] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)
<7> [490.134857] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [490.134928] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [490.134999] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)
<7> [490.135069] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)
<7> [490.135139] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [490.135210] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [490.135282] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [490.135354] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [490.135425] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)
<7> [490.135516] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)
<7> [490.135593] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in port_clock (expected 0, found 432000)
<7> [490.135669] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset
<7> [490.135771] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [490.135836] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x2
<7> [490.135919] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051
<7> [490.135978] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45
<7> [490.136043] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [490.136107] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [490.136168] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [490.136221] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [490.136290] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1
<7> [490.136390] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [490.136504] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [490.136604] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [490.136690] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [490.136769] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [490.136846] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:268:pipe B] min cdclk: 0 kHz -> 173855 kHz
<7> [490.136944] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [490.137023] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz
<7> [490.137099] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [490.137201] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated DPLL 0
<7> [490.137276] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving DPLL 0
<7> [490.137354] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset]
<7> [490.137445] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [490.137539] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0
<7> [490.137542] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [490.137641] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [490.137744] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [490.137739] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [490.137822] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [490.137845] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [490.137906] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [490.137993] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [490.137970] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [490.138090] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [490.138173] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [490.138261] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [490.138346] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [490.138437] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [490.138543] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [490.138648] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [490.138737] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [490.138809] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [490.138879] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [490.138956] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [490.139035] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [490.139113] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [490.139185] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [490.139254] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [490.139325] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [490.139394] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [490.139476] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [490.139553] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [490.139634] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [490.139722] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [490.139806] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [490.139891] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [490.139969] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [490.140042] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [490.140115] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [490.140193] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [490.140271] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [490.140348] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,
<7> [490.140425] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [490.140512] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [490.140583] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [490.140653] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [490.140723] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [490.140796] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [490.140871] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [490.140945] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [490.141015] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [490.141084] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [490.141153] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [490.141221] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [490.141289] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [490.141357] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [490.141425] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [490.141516] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [490.141606] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [490.141703] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [490.141784] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [490.141857] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [490.141924] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [490.141991] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:429] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [490.142062] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [490.142130] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [490.142202] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no
<7> [490.142274] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no
<7> [490.142344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no
<7> [490.142416] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no
<7> [490.142547] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no
<7> [490.145436] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [490.145612] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [490.145772] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [490.145864] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [490.145949] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7> [490.146036] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]
<7> [490.146109] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]
<7> [490.146171] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]
<7> [490.146233] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]
<7> [490.146296] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]
<7> [490.146357] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]
<7> [490.146418] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]
<7> [490.146514] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]
<7> [490.146608] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]
<7> [490.146701] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]
<7> [490.146774] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]
<7> [490.146835] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]
<7> [490.146893] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]
<7> [490.146971] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [490.147127] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)
<7> [490.147186] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7> [490.147291] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [490.148466] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:268:pipe B]
<7> [490.148569] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [490.150260] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on
<7> [490.150352] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (451 ms remaining)
<7> [490.594659] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [490.594745] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [490.594860] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [490.603525] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [490.710844] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [490.711226] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on
<7> [490.711621] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [490.747395] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [490.747865] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [490.748195] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [490.748648] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [490.918917] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [490.919318] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on
<7> [490.919743] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [490.921835] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [490.923173] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [490.924093] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7> [490.925313] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [490.926660] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [490.927805] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK
<7> [490.928223] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [490.929737] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [490.930090] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7> [490.930983] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe B
<7> [490.931583] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [490.932009] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe B
<7> [490.932518] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518
<7> [490.948380] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [490.950350] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [490.950866] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]
<7> [490.960237] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]
<7> [490.983980] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe B
<7> [491.001564] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [491.002445] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [491.002928] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [491.003092] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [491.004203] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl
<7> [491.004230] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:431] is removed
<7> [491.004257] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0
<7> [491.004342] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [491.004385] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [491.004432] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [491.004520] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [491.004547] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [491.004605] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [491.004699] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [491.004806] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [491.004903] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [491.004998] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [491.005086] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [491.005171] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [491.017709] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2
<7> [491.055090] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B]
<7> [491.055352] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.enable (expected yes, found no)
<7> [491.055946] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected yes, found no)
<7> [491.056487] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in cpu_transcoder (expected 1, found -1)
<7> [491.056975] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in lane_count (expected 4, found 0)
<7> [491.057422] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)
<7> [491.057906] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [491.058291] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [491.058691] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [491.059109] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [491.059491] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [491.059841] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [491.060281] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [491.060705] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [491.061135] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [491.061542] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)
<7> [491.061917] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [491.062289] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [491.062753] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)
<7> [491.063114] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)
<7> [491.063527] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [491.063873] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [491.064202] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [491.064563] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [491.064876] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [491.065175] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [491.065485] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [491.065756] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)
<7> [491.066025] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [491.066288] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [491.066437] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [491.066612] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)
<7> [491.066785] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [491.066883] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)
<7> [491.067091] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [491.067138] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [491.067376] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [491.067648] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [491.067871] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [491.068086] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)
<7> [491.068302] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)
<7> [491.068579] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in port_clock (expected 432000, found 0)
<7> [491.068785] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset
<7> [491.068982] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing DPLL 0
<7> [491.069251] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [491.069434] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0
<7> [491.069623] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0
<7> [491.069792] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:268:pipe B] min cdclk: 173855 kHz -> 0 kHz
<7> [491.069993] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [491.070181] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz
<7> [491.070358] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [491.070594] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [modeset]
<7> [491.070772] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [NOFB], visible: no
<7> [491.070930] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no
<7> [491.071086] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no
<7> [491.071255] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no
<7> [491.071408] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no
<7> [491.071549] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no
<7> [491.071744] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [491.071903] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [491.072193] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [491.072350] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [491.274503] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0
<7> [491.275241] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe B
<7> [491.285946] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off
<7> [491.286431] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [491.286864] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [491.338047] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [491.338614] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x2, on? 1) for [CRTC:268:pipe B]
<7> [491.339049] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [491.339563] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<7> [491.340055] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [491.340162] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [491.340654] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [491.341280] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]
<7> [491.341800] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]
<7> [491.342212] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]
<7> [491.342624] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]
<7> [491.343011] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]
<7> [491.343324] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]
<7> [491.343698] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]
<7> [491.344060] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]
<7> [491.344438] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]
<7> [491.344775] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]
<7> [491.345134] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]
<7> [491.345512] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]
<7> [491.345839] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]
<7> [491.346199] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [491.346663] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [491.346982] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)
<7> [491.347291] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [491.347858] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [491.348367] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [491.348986] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]
<7> [491.349358] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [491.349884] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [491.350208] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384
<6> [491.354767] [IGT] kms_flip_event_leak: finished subtest pipe-B-eDP-1, SUCCESS
<6> [491.356628] [IGT] kms_flip_event_leak: starting dynamic subtest pipe-C-eDP-1
<7> [491.368687] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [491.368827] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:429]
<7> [491.368839] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [491.368942] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [491.369062] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [491.369150] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [491.369325] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [491.369604] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [491.370106] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:149:pipe A]
<7> [491.371522] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B]
<7> [491.372903] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]
<7> [491.372920] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:391:eDP-1]
<7> [491.372970] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [491.373071] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:387:pipe C] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [491.373155] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [491.373237] xe 0000:00:02.0: [drm:intel_psr_compute_config [xe]] PSR2 not supported in transcoder C
<7> [491.373309] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:387:pipe C] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [491.373415] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:387:pipe C]
<7> [491.373524] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.enable (expected no, found yes)
<7> [491.373633] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.active (expected no, found yes)
<7> [491.373729] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in cpu_transcoder (expected -1, found 2)
<7> [491.373811] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in lane_count (expected 0, found 4)
<7> [491.373892] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)
<7> [491.373973] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [491.374053] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [491.374133] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [491.374214] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [491.374296] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [491.374381] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [491.374467] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [491.374552] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [491.374636] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [491.374716] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)
<7> [491.374791] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [491.374865] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [491.374832] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [491.374939] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)
<7> [491.375014] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)
<7> [491.375021] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [491.375087] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [491.375129] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [491.375161] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [491.375235] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [491.375260] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [491.375307] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [491.375385] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [491.375462] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [491.375540] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [491.375617] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)
<7> [491.375691] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [491.375761] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [491.375832] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)
<7> [491.375901] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)
<7> [491.375971] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [491.376040] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [491.376110] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [491.376180] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [491.376249] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)
<7> [491.376320] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)
<7> [491.376399] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in port_clock (expected 0, found 432000)
<7> [491.376481] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:387:pipe C] fastset requirement not met, forcing full modeset
<7> [491.376580] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xd (total dbuf slices 0xf), mbus joined? no->no
<7> [491.376644] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:387:pipe C] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x4
<7> [491.376722] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:271:plane 1C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [491.376782] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:381:cursor C] ddb ( 0 - 0) -> (2003 - 2048), size 0 -> 45
<7> [491.376843] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [491.376903] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [491.376963] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [491.377019] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [491.377087] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 1390840 num active planes 1
<7> [491.377169] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [491.377249] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [491.377328] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [491.377427] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [491.377527] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [491.377651] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:387:pipe C] min cdclk: 0 kHz -> 173855 kHz
<7> [491.377768] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [491.377858] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz
<7> [491.377947] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [491.378044] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:387:pipe C] allocated DPLL 0
<7> [491.378121] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:387:pipe C] reserving DPLL 0
<7> [491.378195] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: yes [modeset]
<7> [491.378276] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [491.378356] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: C, pipe bpp: 30, dithering: 0
<7> [491.378528] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [491.378617] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [491.378701] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [491.378783] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [491.378865] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [491.378939] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [491.379013] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [491.379087] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [491.379166] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [491.379250] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [491.379332] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [491.379427] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 2, length 8
<7> [491.379506] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [491.379586] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [491.379664] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [491.379742] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [491.379814] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [491.379885] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [491.379957] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [491.380029] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [491.380100] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [491.380172] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [491.380244] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [491.380316] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [491.380392] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [491.380471] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [491.380548] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [491.380625] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [491.380703] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [491.380776] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [491.380849] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [491.380922] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [491.380994] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [491.381067] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,
<7> [491.381138] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [491.381209] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [491.381280] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [491.381351] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [491.381440] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [491.381517] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [491.381606] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [491.381693] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [491.381779] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [491.381853] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [491.381922] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [491.381990] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [491.382059] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [491.382128] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [491.382196] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [491.382266] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [491.382335] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [491.382419] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [491.382494] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [491.382576] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [491.382662] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [491.382742] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:271:plane 1C] fb: [FB:429] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [491.382820] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [491.382887] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [491.382956] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:301:plane 2C] fb: [NOFB], visible: no
<7> [491.383024] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:331:plane 3C] fb: [NOFB], visible: no
<7> [491.383092] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:361:plane 4C] fb: [NOFB], visible: no
<7> [491.383160] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:371:plane 5C] fb: [NOFB], visible: no
<7> [491.383228] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:381:cursor C] fb: [NOFB], visible: no
<7> [491.385954] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [491.386102] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [491.386254] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [491.386347] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [491.386579] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7> [491.386680] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]
<7> [491.386747] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]
<7> [491.386812] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]
<7> [491.386874] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]
<7> [491.386936] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]
<7> [491.386997] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]
<7> [491.387057] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]
<7> [491.387115] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]
<7> [491.387175] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]
<7> [491.387233] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]
<7> [491.387289] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]
<7> [491.387349] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]
<7> [491.387432] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]
<7> [491.387530] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xd
<7> [491.387728] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [491.387844] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [491.389159] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x4, on? 0) for [CRTC:387:pipe C]
<7> [491.389237] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [491.390933] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on
<7> [491.391008] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (448 ms remaining)
<7> [491.842582] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [491.873582] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [491.874073] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on
<7> [491.874575] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [491.910294] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [491.910848] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [491.911266] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [491.911687] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [492.086872] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [492.087251] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on
<7> [492.087618] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [492.089815] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [492.091131] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [492.091922] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7> [492.093165] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [492.094422] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [492.095586] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK
<7> [492.095935] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [492.097485] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [492.097826] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7> [492.098628] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe C
<7> [492.099141] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [492.099525] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe C
<7> [492.099928] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518
<7> [492.101515] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 10600448 bytes of contiguous stolen space for FBC, limit: 2
<7> [492.101901] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:271:plane 1C]
<7> [492.115926] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [492.117364] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [492.117787] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C]
<7> [492.151143] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe C
<7> [492.171045] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [492.173568] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl
<7> [492.173607] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:271:plane 1C] because [FB:431] is removed
<7> [492.173638] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:271:plane 1C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [492.173745] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [492.173823] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [492.173893] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [492.173957] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [492.174028] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [492.174124] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [492.174221] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [492.174315] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [492.174431] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [492.174537] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [492.185972] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [492.199200] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:271:plane 1C]
<7> [492.221887] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]
<7> [492.222037] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.enable (expected yes, found no)
<7> [492.222354] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.active (expected yes, found no)
<7> [492.222629] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in cpu_transcoder (expected 2, found -1)
<7> [492.222891] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in lane_count (expected 4, found 0)
<7> [492.223172] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)
<7> [492.223441] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [492.223701] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [492.223920] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [492.224134] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [492.224351] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [492.224581] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [492.224785] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [492.224964] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [492.225141] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [492.225353] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)
<7> [492.225521] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [492.225684] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [492.225841] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)
<7> [492.225997] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)
<7> [492.226150] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [492.226297] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [492.226619] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [492.226758] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [492.226901] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [492.227035] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [492.227166] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [492.227294] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)
<7> [492.227438] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [492.227561] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [492.227680] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)
<7> [492.227797] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)
<7> [492.227930] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [492.228065] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [492.228180] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [492.228296] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [492.228430] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)
<7> [492.228538] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)
<7> [492.228648] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in port_clock (expected 432000, found 0)
<7> [492.228760] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:387:pipe C] fastset requirement not met, forcing full modeset
<7> [492.228869] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:387:pipe C] releasing DPLL 0
<7> [492.229001] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xd -> 0x1 (total dbuf slices 0xf), mbus joined? no->no
<7> [492.229084] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:387:pipe C] dbuf slices 0xc -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x4 -> 0x0
<7> [492.229192] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:381:cursor C] ddb (2003 - 2048) -> ( 0 - 0), size 45 -> 0
<7> [492.229312] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:387:pipe C] min cdclk: 173855 kHz -> 0 kHz
<7> [492.229474] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [492.229586] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz
<7> [492.229690] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [492.229817] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [modeset]
<7> [492.229921] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:271:plane 1C] fb: [NOFB], visible: no
<7> [492.230024] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:301:plane 2C] fb: [NOFB], visible: no
<7> [492.230122] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:331:plane 3C] fb: [NOFB], visible: no
<7> [492.230215] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:361:plane 4C] fb: [NOFB], visible: no
<7> [492.230307] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:371:plane 5C] fb: [NOFB], visible: no
<7> [492.230415] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:381:cursor C] fb: [NOFB], visible: no
<7> [492.230623] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [492.230727] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [492.434438] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0
<7> [492.434953] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe C
<7> [492.456360] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off
<7> [492.456713] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [492.456851] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [492.457293] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [492.457354] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<7> [492.509572] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [492.510201] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<7> [492.518526] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [492.518971] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x4, on? 1) for [CRTC:387:pipe C]
<7> [492.519010] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [492.519583] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [492.520399] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [492.521021] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [492.521689] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]
<7> [492.522107] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]
<7> [492.522541] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]
<7> [492.522916] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]
<7> [492.523349] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]
<7> [492.523729] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]
<7> [492.524080] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]
<7> [492.524457] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]
<7> [492.524800] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]
<7> [492.525173] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]
<7> [492.525553] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]
<7> [492.525888] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]
<7> [492.526257] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]
<7> [492.526646] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [492.527068] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [492.527404] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [492.527979] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [492.528453] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [492.528934] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C]
<7> [492.529294] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [492.529858] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [492.530188] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384
<6> [492.534768] [IGT] kms_flip_event_leak: finished subtest pipe-C-eDP-1, SUCCESS
<6> [492.535569] [IGT] kms_flip_event_leak: finished subtest basic, SUCCESS
<7> [492.536461] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [492.536695] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [492.536892] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [492.537094] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [492.537284] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A]
<7> [492.537500] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [492.537675] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [492.537841] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [492.538004] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [492.538157] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)
<7> [492.538304] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [492.538473] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [492.538632] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [492.538769] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [492.538897] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [492.539025] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [492.539149] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [492.539269] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [492.539403] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [492.539536] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)
<7> [492.539660] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [492.539770] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [492.539880] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)
<7> [492.539991] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)
<7> [492.540097] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [492.540205] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [492.540323] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [492.540439] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [492.540550] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [492.540648] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [492.540745] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [492.540849] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)
<7> [492.540952] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [492.541041] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [492.541126] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)
<7> [492.541207] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)
<7> [492.541287] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [492.541393] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [492.541485] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [492.541578] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [492.541665] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)
<7> [492.541742] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)
<7> [492.541818] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000)
<7> [492.541900] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset
<7> [492.542048] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [492.542127] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1
<7> [492.542198] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051
<7> [492.542254] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45
<7> [492.542307] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [492.542556] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [492.542634] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [492.542704] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [492.542782] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1
<7> [492.542894] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [492.543006] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [492.543102] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [492.543183] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [492.543260] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [492.543344] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz
<7> [492.543470] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [492.543574] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz
<7> [492.543666] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [492.543765] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0
<7> [492.543860] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0
<7> [492.543962] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]
<7> [492.544065] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [492.544152] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [492.544230] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [492.544308] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [492.544583] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [492.544698] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [492.544794] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [492.544888] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [492.544971] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [492.545051] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [492.545130] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [492.545208] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [492.545289] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [492.545289] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [492.545401] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [492.545493] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [492.545505] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [492.545598] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [492.545602] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [492.545694] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [492.545706] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [492.545784] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [492.545876] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [492.545968] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [492.546064] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [492.546143] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [492.546220] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [492.546297] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [492.546392] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [492.546485] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [492.546578] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [492.546661] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [492.546731] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [492.546803] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [492.546874] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [492.546944] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [492.547014] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [492.547086] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [492.547160] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [492.547235] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,
<7> [492.547307] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [492.547415] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [492.547518] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [492.547623] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [492.547706] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [492.547779] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [492.547850] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [492.547920] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [492.547991] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [492.548061] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [492.548131] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [492.548201] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [492.548271] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [492.548361] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [492.548381] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [492.548454] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [492.548545] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [492.548538] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [492.548637] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [492.548676] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [492.548716] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [492.548785] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [492.548802] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [492.548854] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [492.548925] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [492.549000] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [492.549077] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [492.549153] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [492.549225] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no
<7> [492.549295] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no
<7> [492.549386] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no
<7> [492.549480] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no
<7> [492.549574] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no
<7> [492.549722] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [492.549814] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [492.550059] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [492.550192] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [492.550334] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [492.550446] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [492.550544] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7> [492.550644] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]
<7> [492.550706] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]
<7> [492.550767] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]
<7> [492.550828] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]
<7> [492.550887] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]
<7> [492.550947] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]
<7> [492.551007] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]
<7> [492.551068] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]
<7> [492.551128] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]
<7> [492.551186] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]
<7> [492.551244] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]
<7> [492.551303] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]
<7> [492.551391] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]
<7> [492.551487] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [492.551664] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)
<7> [492.551723] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7> [492.551822] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [492.553228] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A]
<7> [492.553385] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [492.555094] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on
<7> [492.555171] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (464 ms remaining)
<7> [493.027841] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [493.048508] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [493.048917] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on
<7> [493.049285] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [493.085092] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [493.085726] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [493.086206] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [493.086811] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [493.262924] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [493.263451] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on
<7> [493.263828] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [493.266077] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [493.267528] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [493.268515] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7> [493.269917] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [493.271299] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [493.272602] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK
<7> [493.273052] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [493.274719] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [493.275147] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7> [493.276051] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [493.276683] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [493.277132] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7> [493.277682] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518
<7> [493.293560] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [493.295493] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [493.295963] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]
<7> [493.299344] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [493.300513] [IGT] kms_flip_event_leak: exiting, ret=0
<6> [493.311194] Console: switching to colour frame buffer device 180x56
<7> [493.328422] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [493.328981] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [493.329518] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [493.330000] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [493.330561] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [493.361452] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [493.362036] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [493.362570] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
Created at 2026-01-19 08:20:00