Results for igt@kms_plane_scaling@plane-upscale-20x20-with-modifiers@pipe-c

Result: Pass

i915_display_info13 igt_runner13 results13.json results13-xe-load.json guc_logs13.tar i915_display_info_post_exec13 boot13 dmesg13

DetailValue
Duration 1.73 seconds
Hostname
shard-lnl-2
Igt-Version
IGT-Version: 2.3-g726612327 (x86_64) (Linux: 6.19.0-rc5-lgci-xe-xe-4371-630dc29de423d3640+ x86_64)
Out
Starting dynamic subtest: pipe-C
Trying on eDP-1
Dynamic subtest pipe-C: SUCCESS (1.726s)
Subtest plane-upscale-20x20-with-modifiers: SUCCESS (3.849s)
Err
Starting dynamic subtest: pipe-C
Dynamic subtest pipe-C: SUCCESS (1.726s)
Subtest plane-upscale-20x20-with-modifiers: SUCCESS (3.849s)
Dmesg
<6> [115.965955] [IGT] kms_plane_scaling: starting dynamic subtest pipe-C
<7> [115.970605] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [115.973202] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [115.973764] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:387:pipe C] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [115.974123] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [115.974476] xe 0000:00:02.0: [drm:intel_psr_compute_config [xe]] PSR2 not supported in transcoder C
<7> [115.974743] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:387:pipe C] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [115.975062] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:387:pipe C]
<7> [115.975372] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.enable (expected yes, found no)
<7> [115.975681] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected yes, found no)
<7> [115.975943] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in cpu_transcoder (expected 1, found -1)
<7> [115.976197] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in lane_count (expected 4, found 0)
<7> [115.976460] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)
<7> [115.976752] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [115.976981] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [115.977230] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [115.977464] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [115.977667] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [115.977868] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [115.978057] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [115.978239] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [115.978431] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [115.978605] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)
<7> [115.978800] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [115.978958] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [115.979110] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)
<7> [115.979257] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)
<7> [115.979420] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [115.979563] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [115.979701] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [115.979855] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [115.980007] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [115.980137] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [115.980267] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [115.980345] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [115.980409] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)
<7> [115.980531] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [115.980542] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [115.980650] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [115.980701] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [115.980761] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)
<7> [115.980871] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)
<7> [115.980978] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [115.981082] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [115.981186] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [115.981287] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [115.981441] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)
<7> [115.981538] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)
<7> [115.981633] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in port_clock (expected 432000, found 0)
<7> [115.981729] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset
<7> [115.981822] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.enable (expected no, found yes)
<7> [115.981915] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.active (expected no, found yes)
<7> [115.982009] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in cpu_transcoder (expected -1, found 2)
<7> [115.982101] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in lane_count (expected 0, found 4)
<7> [115.982190] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)
<7> [115.982278] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [115.982385] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [115.982478] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [115.982571] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [115.982662] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [115.982751] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [115.982844] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [115.982933] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [115.983033] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [115.983133] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)
<7> [115.983233] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [115.983325] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [115.983413] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)
<7> [115.983502] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)
<7> [115.983591] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [115.983685] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [115.983777] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [115.983866] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [115.983952] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [115.984027] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [115.984101] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [115.984180] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)
<7> [115.984263] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [115.984353] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [115.984447] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)
<7> [115.984540] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)
<7> [115.984627] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [115.984702] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [115.984773] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [115.984842] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [115.984911] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)
<7> [115.984980] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)
<7> [115.985049] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in port_clock (expected 0, found 432000)
<7> [115.985117] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:387:pipe C] fastset requirement not met, forcing full modeset
<7> [115.985187] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing DPLL 0
<7> [115.985267] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.12: staged scaling request for 20x20->2880x1800 scaler_users = 0x1000
<7> [115.985364] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xd (total dbuf slices 0xf), mbus joined? yes->no
<7> [115.985448] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x4
<7> [115.985532] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:387:pipe C] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x2 -> 0x4
<7> [115.985617] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0
<7> [115.985682] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:271:plane 1C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [115.985740] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:381:cursor C] ddb ( 0 - 0) -> (2003 - 2048), size 0 -> 45
<7> [115.985795] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [115.985848] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [115.985902] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [115.985954] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [115.986016] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 1390840 num active planes 1
<7> [115.986099] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [115.986179] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [115.986258] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [115.986375] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [115.986476] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [115.986576] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:268:pipe B] min cdclk: 173855 kHz -> 0 kHz
<7> [115.986667] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:387:pipe C] min cdclk: 0 kHz -> 173855 kHz
<7> [115.986770] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:387:pipe C] allocated DPLL 0
<7> [115.986850] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:387:pipe C] reserving DPLL 0
<7> [115.986930] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:387:pipe C] attached scaler id 2.0 to PLANE:271
<7> [115.986982] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [modeset]
<7> [115.987061] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [NOFB], visible: no
<7> [115.987142] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no
<7> [115.987221] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no
<7> [115.987306] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no
<7> [115.987399] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no
<7> [115.987498] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no
<7> [115.987596] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: yes [modeset]
<7> [115.987679] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [115.987751] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: C, pipe bpp: 30, dithering: 0
<7> [115.987824] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [115.987895] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [115.987967] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [115.988038] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [115.988109] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [115.988180] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [115.988251] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [115.988327] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [115.988418] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [115.988510] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [115.988600] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [115.988674] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 2, length 8
<7> [115.988745] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [115.988815] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [115.988885] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [115.988953] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [115.989027] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [115.989106] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [115.989177] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [115.989245] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [115.989321] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [115.989411] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [115.989501] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [115.989591] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [115.989667] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [115.989736] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [115.989811] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [115.989889] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [115.989968] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [115.990046] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x1000, scaler_id: -1, scaling_filter: 0
<7> [115.990114] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [115.990182] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [115.990250] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [115.990322] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,
<7> [115.990411] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [115.990499] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [115.990588] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [115.990663] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [115.990732] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [115.990800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [115.990868] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [115.990941] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [115.991014] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [115.991087] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [115.991160] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [115.991233] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [115.991312] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [115.991402] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [115.991495] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [115.991587] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [115.991664] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [115.991733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [115.991802] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [115.991872] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [115.991941] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [115.992010] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:271:plane 1C] fb: [FB:431] 20x20 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [115.992080] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0
<7> [115.992150] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 20.000000x20.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [115.992225] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:301:plane 2C] fb: [NOFB], visible: no
<7> [115.992295] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:331:plane 3C] fb: [NOFB], visible: no
<7> [115.992399] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:361:plane 4C] fb: [NOFB], visible: no
<7> [115.992491] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:371:plane 5C] fb: [NOFB], visible: no
<7> [115.992580] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:381:cursor C] fb: [NOFB], visible: no
<7> [115.992737] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [115.992826] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [115.992967] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [115.993180] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [115.993263] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [116.197596] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0
<7> [116.198079] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe B
<7> [116.219369] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off
<7> [116.219861] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [116.219797] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [116.220330] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [116.220322] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<7> [116.272176] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [116.272665] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<7> [116.279614] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [116.280073] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x2, on? 1) for [CRTC:268:pipe B]
<7> [116.280132] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [116.280757] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [116.281526] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [116.282040] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [116.282615] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]
<7> [116.282992] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]
<7> [116.283346] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]
<7> [116.283708] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]
<7> [116.283995] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]
<7> [116.284349] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]
<7> [116.284631] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]
<7> [116.284906] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]
<7> [116.285173] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]
<7> [116.285518] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]
<7> [116.285787] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]
<7> [116.286049] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]
<7> [116.286320] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]
<7> [116.286577] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:400:DP-1]
<7> [116.286866] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:412:DP-2]
<7> [116.287169] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:420:DP-3]
<7> [116.287598] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [116.287962] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)
<7> [116.288268] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [116.289483] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x4, on? 0) for [CRTC:387:pipe C]
<7> [116.289991] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [116.292242] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on
<7> [116.292627] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (488 ms remaining)
<7> [116.308758] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [116.309251] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [116.309691] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [116.310152] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [116.789604] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [116.820492] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [116.820962] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on
<7> [116.821401] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [116.857139] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [116.857491] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [116.857820] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [116.858484] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [117.028023] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [117.028566] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on
<7> [117.028975] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [117.031230] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [117.032611] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [117.033496] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7> [117.034785] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [117.036049] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [117.037210] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK
<7> [117.037614] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [117.039087] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [117.039501] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7> [117.040387] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe C
<7> [117.040908] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [117.041318] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe C
<7> [117.041738] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 13892
<7> [117.042919] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 20480 bytes of contiguous stolen space for FBC, limit: 1
<7> [117.043310] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:271:plane 1C]
<7> [117.057655] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xd
<7> [117.058139] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [117.058659] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]
<7> [117.059082] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.060526] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [117.060910] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C]
<7> [117.064510] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe C
<7> [117.064933] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl
<7> [117.065043] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:271:plane 1C] because [FB:431] is removed
<7> [117.065110] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.12: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.065518] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:271:plane 1C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.065820] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.066071] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.066400] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.066640] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.066905] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [117.067284] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.067633] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.067977] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.068308] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.068592] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.069343] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.074312] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:271:plane 1C]
<7> [117.093694] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [117.094005] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.12: staged scaling request for 20x20->2880x1800 scaler_users = 0x1000
<7> [117.094512] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:271:plane 1C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.094909] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.095225] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [117.095613] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [117.095911] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [117.096320] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 1390840 num active planes 1
<7> [117.096789] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.097223] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.097746] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.098138] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.098545] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.099001] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:387:pipe C] attached scaler id 2.0 to PLANE:271
<7> [117.100971] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 163840 bytes of contiguous stolen space for FBC, limit: 1
<7> [117.101346] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:271:plane 1C]
<7> [117.107657] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.109019] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [117.109095] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:271:plane 1C] because [FB:432] is removed
<7> [117.109139] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.12: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.110297] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:271:plane 1C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.110514] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.110717] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.110918] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.111112] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.111338] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [117.111589] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.111831] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.112059] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.112292] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.112508] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.113036] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.124310] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:271:plane 1C]
<7> [117.142957] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [117.143316] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.12: staged scaling request for 20x20->2880x1800 scaler_users = 0x1000
<7> [117.143790] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:271:plane 1C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.144184] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.144589] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [117.144898] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [117.145225] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [117.145644] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 1390840 num active planes 1
<7> [117.146092] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.146562] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.146955] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.147424] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.147811] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.148285] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:387:pipe C] attached scaler id 2.0 to PLANE:271
<7> [117.150085] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 40960 bytes of contiguous stolen space for FBC, limit: 1
<7> [117.150433] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:271:plane 1C]
<7> [117.157654] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.159128] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [117.159226] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:271:plane 1C] because [FB:432] is removed
<7> [117.159313] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.12: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.159643] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:271:plane 1C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.159889] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.160114] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.160383] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.160582] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.160826] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [117.161150] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.161506] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.161778] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.162029] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.162274] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.162857] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.174313] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:271:plane 1C]
<7> [117.192576] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [117.192952] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.13: staged scaling request for 20x20->2880x1800 scaler_users = 0x2000
<7> [117.193448] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:301:plane 2C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.193804] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.194119] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [117.194480] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [117.194812] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [117.195143] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 1390840 num active planes 1
<7> [117.195800] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.13: staged scaling request for 20x20->2880x1800 scaler_users = 0x2000
<7> [117.196146] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:301:plane 2C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.196490] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.196743] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [117.196988] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [117.197282] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [117.197533] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 1390840 num active planes 1
<7> [117.197922] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.198388] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.198819] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.199193] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.199652] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.200063] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:387:pipe C] attached scaler id 2.0 to PLANE:301
<7> [117.201233] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 20480 bytes of contiguous stolen space for FBC, limit: 1
<7> [117.201540] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:301:plane 2C]
<7> [117.207621] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.208733] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [117.208775] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:301:plane 2C] because [FB:432] is removed
<7> [117.208815] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.13: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.209185] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:301:plane 2C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.209573] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.209764] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.209880] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.209997] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.210117] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [117.210295] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.210455] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.210610] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.210760] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.210901] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.211258] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.224279] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:301:plane 2C]
<7> [117.242264] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [117.242545] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.13: staged scaling request for 20x20->2880x1800 scaler_users = 0x2000
<7> [117.242942] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:301:plane 2C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.243289] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.243578] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [117.243881] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [117.244202] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [117.244613] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 1390840 num active planes 1
<7> [117.245178] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.13: staged scaling request for 20x20->2880x1800 scaler_users = 0x2000
<7> [117.245579] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:301:plane 2C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.245899] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.246173] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [117.246526] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [117.246825] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [117.247090] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 1390840 num active planes 1
<7> [117.247518] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.247907] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.248264] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.248665] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.249046] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.249453] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:387:pipe C] attached scaler id 2.0 to PLANE:301
<7> [117.250726] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 163840 bytes of contiguous stolen space for FBC, limit: 1
<7> [117.250973] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:301:plane 2C]
<7> [117.257597] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.258674] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [117.258715] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:301:plane 2C] because [FB:432] is removed
<7> [117.258761] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.13: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.259170] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:301:plane 2C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.259591] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.259807] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.259929] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.260064] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.260213] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [117.260431] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.260596] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.260756] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.260909] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.261053] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.261425] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.274270] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:301:plane 2C]
<7> [117.293405] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [117.293950] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.13: staged scaling request for 20x20->2880x1800 scaler_users = 0x2000
<7> [117.294669] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:301:plane 2C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.295088] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.295497] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [117.295823] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [117.296134] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [117.296540] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 1390840 num active planes 1
<7> [117.297076] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.297700] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.298195] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.298711] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.299209] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.299885] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:387:pipe C] attached scaler id 2.0 to PLANE:301
<7> [117.302582] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 40960 bytes of contiguous stolen space for FBC, limit: 1
<7> [117.302926] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:301:plane 2C]
<7> [117.307623] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.309497] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [117.309619] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:301:plane 2C] because [FB:432] is removed
<7> [117.309668] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.13: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.310016] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:301:plane 2C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.310401] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.310665] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.310901] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.311172] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:301:plane 2C] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.311474] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [117.311843] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.312144] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.312450] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.312764] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.313018] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.313649] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.324268] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:301:plane 2C]
<7> [117.342150] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [117.342438] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.14: staged scaling request for 20x20->2880x1800 scaler_users = 0x4000
<7> [117.342771] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:331:plane 3C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.343035] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:331:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.343327] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:331:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [117.343572] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:331:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [117.343866] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:331:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [117.344162] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 1390840 num active planes 1
<7> [117.344601] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.344992] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.345413] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.345815] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.346188] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.346718] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:387:pipe C] attached scaler id 2.0 to PLANE:331
<7> [117.348067] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 20480 bytes of contiguous stolen space for FBC, limit: 1
<7> [117.348414] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:331:plane 3C]
<7> [117.357604] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.359201] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [117.359353] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:331:plane 3C] because [FB:432] is removed
<7> [117.359409] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.14: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.359771] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:331:plane 3C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.360041] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:331:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.360318] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:331:plane 3C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.360549] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:331:plane 3C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.360797] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:331:plane 3C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.361031] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [117.361360] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.361659] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.361935] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.362265] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.362515] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.363126] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.374274] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:331:plane 3C]
<7> [117.392041] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [117.392292] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.14: staged scaling request for 20x20->2880x1800 scaler_users = 0x4000
<7> [117.392627] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:331:plane 3C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.392911] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:331:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.393170] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:331:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [117.393487] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:331:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [117.393761] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:331:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [117.394061] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 1390840 num active planes 1
<7> [117.394506] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.394941] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.395394] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.395780] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.396152] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.396631] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:387:pipe C] attached scaler id 2.0 to PLANE:331
<7> [117.398206] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 163840 bytes of contiguous stolen space for FBC, limit: 1
<7> [117.398559] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:331:plane 3C]
<7> [117.407611] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.409185] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [117.409301] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:331:plane 3C] because [FB:432] is removed
<7> [117.409358] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.14: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.409728] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:331:plane 3C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.410021] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:331:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.410296] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:331:plane 3C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.410537] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:331:plane 3C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.410808] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:331:plane 3C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.411058] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [117.411424] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.411747] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.412041] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.412406] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.412677] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.413278] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.424260] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:331:plane 3C]
<7> [117.442500] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [117.442761] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.14: staged scaling request for 20x20->2880x1800 scaler_users = 0x4000
<7> [117.443158] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:331:plane 3C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.443613] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:331:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.443936] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:331:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [117.444263] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:331:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [117.444589] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:331:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [117.444917] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 1390840 num active planes 1
<7> [117.445378] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.445844] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.446245] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.446677] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.447106] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.447654] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:387:pipe C] attached scaler id 2.0 to PLANE:331
<7> [117.449373] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 40960 bytes of contiguous stolen space for FBC, limit: 1
<7> [117.449699] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:331:plane 3C]
<7> [117.457595] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.459104] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [117.459190] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:331:plane 3C] because [FB:432] is removed
<7> [117.459261] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.14: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.459598] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:331:plane 3C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.459910] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:331:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.460138] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:331:plane 3C] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.460410] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:331:plane 3C] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.460632] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:331:plane 3C] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.460901] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [117.461210] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.461539] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.461811] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.462077] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.462398] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.462989] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.474265] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:331:plane 3C]
<7> [117.492159] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [117.492455] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.15: staged scaling request for 20x20->2880x1800 scaler_users = 0x8000
<7> [117.492818] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:361:plane 4C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.493148] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:361:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.493477] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:361:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [117.493756] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:361:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [117.494057] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:361:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [117.494394] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 1390840 num active planes 1
<7> [117.494798] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.495192] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.495631] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.496063] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.496478] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.496962] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:387:pipe C] attached scaler id 2.0 to PLANE:361
<7> [117.507576] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.509153] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [117.509269] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:361:plane 4C] because [FB:432] is removed
<7> [117.509325] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.15: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.509691] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:361:plane 4C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.509998] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:361:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.510268] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:361:plane 4C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.510509] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:361:plane 4C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.510756] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:361:plane 4C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.511005] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [117.511361] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.511686] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.511980] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.512284] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.512601] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.513192] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.525382] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [117.525587] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.15: staged scaling request for 20x20->2880x1800 scaler_users = 0x8000
<7> [117.525894] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:361:plane 4C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.526157] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:361:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.526448] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:361:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [117.526647] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:361:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [117.526866] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:361:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [117.527074] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 1390840 num active planes 1
<7> [117.527384] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.527632] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.527871] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.528098] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.528384] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.528647] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:387:pipe C] attached scaler id 2.0 to PLANE:361
<7> [117.540930] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.542464] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [117.542542] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:361:plane 4C] because [FB:432] is removed
<7> [117.542583] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.15: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.542856] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:361:plane 4C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.543131] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:361:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.543395] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:361:plane 4C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.543626] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:361:plane 4C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.543903] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:361:plane 4C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.544156] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [117.544547] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.544900] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.545251] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.545565] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.545925] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.546622] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.558833] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [117.559059] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.15: staged scaling request for 20x20->2880x1800 scaler_users = 0x8000
<7> [117.559406] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:361:plane 4C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.559653] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:361:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.559850] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:361:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [117.560030] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:361:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [117.560203] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:361:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [117.560466] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 1390840 num active planes 1
<7> [117.560717] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.560953] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.561189] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.561433] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.561639] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.561876] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:387:pipe C] attached scaler id 2.0 to PLANE:361
<7> [117.574262] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.575814] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [117.575904] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:361:plane 4C] because [FB:432] is removed
<7> [117.575957] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.15: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.576432] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:361:plane 4C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.576775] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:361:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.577040] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:361:plane 4C] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.577340] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:361:plane 4C] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.577615] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:361:plane 4C] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.577911] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [117.578295] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.578646] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.578996] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.579337] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.579650] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.580298] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.592168] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [117.592524] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.16: staged scaling request for 20x20->2880x1800 scaler_users = 0x10000
<7> [117.592901] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:371:plane 5C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.593212] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.593616] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [117.593925] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [117.594255] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [117.594561] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 1390840 num active planes 1
<7> [117.595127] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.16: staged scaling request for 20x20->2880x1800 scaler_users = 0x10000
<7> [117.595449] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:371:plane 5C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.595692] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.595922] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [117.596129] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [117.596389] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [117.596597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 1390840 num active planes 1
<7> [117.596992] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.16: staged scaling request for 20x20->2880x1800 scaler_users = 0x10000
<7> [117.597197] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:371:plane 5C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.597460] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.597627] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [117.597824] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [117.598004] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [117.598192] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 1390840 num active planes 1
<7> [117.598473] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.598726] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.598950] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.599167] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.599409] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.599658] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:387:pipe C] attached scaler id 2.0 to PLANE:371
<7> [117.607533] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.608503] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [117.608536] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:371:plane 5C] because [FB:432] is removed
<7> [117.608557] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.16: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.608671] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:371:plane 5C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.608859] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.609133] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.609506] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.609726] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.609820] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [117.609948] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.610072] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.610192] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.610330] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.610445] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.610730] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.624914] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [117.625092] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.16: staged scaling request for 20x20->2880x1800 scaler_users = 0x10000
<7> [117.625381] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:371:plane 5C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.625569] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.625744] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0
<7> [117.625914] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33
<7> [117.626103] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34
<7> [117.626315] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 1390840 num active planes 1
<7> [117.626545] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.626763] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.626969] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.627171] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.627417] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.627656] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:387:pipe C] attached scaler id 2.0 to PLANE:371
<7> [117.640889] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.642094] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [117.642155] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:371:plane 5C] because [FB:432] is removed
<7> [117.642190] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.16: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.642490] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:371:plane 5C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.642707] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.642897] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.643085] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.643345] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.643541] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [117.643806] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.644065] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.644323] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.644560] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.644789] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.645332] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [117.658662] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [117.658861] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.16: staged scaling request for 20x20->2880x1800 scaler_users = 0x10000
<7> [117.659153] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:371:plane 5C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [117.659451] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.659671] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [117.659869] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19
<7> [117.660099] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20
<7> [117.660345] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 1390840 num active planes 1
<7> [117.660664] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.660926] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.661165] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.661426] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.661679] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.661937] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:387:pipe C] attached scaler id 2.0 to PLANE:371
<7> [117.674332] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [117.675753] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [117.675837] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:371:plane 5C] because [FB:432] is removed
<7> [117.675887] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.16: Staged freeing scaler id 0 scaler_users = 0x0
<7> [117.676217] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:371:plane 5C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [117.676620] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [117.676886] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.677145] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.677480] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:371:plane 5C] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [117.677791] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [117.678183] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [117.678634] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [117.678990] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.679360] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [117.679698] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [117.680457] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<6> [117.692839] [IGT] kms_plane_scaling: finished subtest pipe-C, SUCCESS
<6> [117.693965] [IGT] kms_plane_scaling: finished subtest plane-upscale-20x20-with-modifiers, SUCCESS
<7> [117.696495] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [117.697635] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [117.697932] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [117.698139] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [117.698372] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [117.698584] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A]
<7> [117.698820] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [117.699004] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [117.699170] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [117.699352] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [117.699512] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)
<7> [117.699667] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [117.699815] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [117.699960] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [117.700100] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [117.700244] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [117.700378] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [117.700509] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [117.700643] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [117.700773] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [117.700898] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)
<7> [117.701018] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [117.701134] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [117.701296] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)
<7> [117.701423] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)
<7> [117.701529] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [117.701631] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [117.701735] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [117.701837] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [117.701933] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [117.702028] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [117.702121] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [117.702213] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)
<7> [117.702319] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [117.702408] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [117.702494] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)
<7> [117.702580] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)
<7> [117.702665] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [117.702748] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [117.702829] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [117.702910] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [117.702988] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)
<7> [117.703064] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)
<7> [117.703140] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000)
<7> [117.703223] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset
<7> [117.703302] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.enable (expected yes, found no)
<7> [117.703379] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.active (expected yes, found no)
<7> [117.703458] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in cpu_transcoder (expected 2, found -1)
<7> [117.703537] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in lane_count (expected 4, found 0)
<7> [117.703613] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)
<7> [117.703689] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [117.703761] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [117.703833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [117.703904] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [117.703975] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [117.704046] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [117.704123] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [117.704199] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [117.704359] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [117.704447] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)
<7> [117.704528] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [117.704604] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [117.704682] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)
<7> [117.704759] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)
<7> [117.704831] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [117.704902] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [117.704971] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [117.705041] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [117.705110] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [117.705179] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [117.705258] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [117.705338] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)
<7> [117.705417] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [117.705495] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [117.705571] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)
<7> [117.705649] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)
<7> [117.705725] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [117.705802] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [117.705885] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [117.705972] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [117.706060] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)
<7> [117.706140] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)
<7> [117.706216] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in port_clock (expected 432000, found 0)
<7> [117.706311] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:387:pipe C] fastset requirement not met, forcing full modeset
<7> [117.706390] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:387:pipe C] releasing DPLL 0
<7> [117.706515] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xd -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [117.706582] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x4 -> 0x1
<7> [117.706647] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:387:pipe C] dbuf slices 0xc -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x4 -> 0x1
<7> [117.706712] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051
<7> [117.706776] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45
<7> [117.706833] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [117.706887] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [117.706940] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [117.706994] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [117.707050] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:381:cursor C] ddb (2003 - 2048) -> ( 0 - 0), size 45 -> 0
<7> [117.707126] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1
<7> [117.707236] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [117.707339] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [117.707430] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.707516] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [117.707602] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [117.707698] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz
<7> [117.707785] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:387:pipe C] min cdclk: 173855 kHz -> 0 kHz
<7> [117.707895] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0
<7> [117.707977] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0
<7> [117.708055] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]
<7> [117.708135] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [117.708214] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [117.708330] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [117.708415] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [117.708499] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [117.708583] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [117.708669] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [117.708753] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [117.708836] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [117.708919] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [117.709000] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [117.709082] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [117.709163] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [117.709250] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [117.709332] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [117.709412] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [117.709492] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [117.709569] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [117.709642] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [117.709714] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [117.709785] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [117.709857] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [117.709929] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [117.710005] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [117.710082] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [117.710159] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [117.710241] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [117.710318] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [117.710396] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [117.710472] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [117.710550] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [117.710626] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [117.710702] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [117.710773] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [117.710843] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [117.710912] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,
<7> [117.710982] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [117.711051] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [117.711120] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [117.711189] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [117.711270] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [117.711346] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [117.711420] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [117.711502] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [117.711588] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [117.711677] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [117.711777] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [117.711856] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [117.711935] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [117.712015] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [117.712088] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [117.712160] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [117.712235] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [117.712311] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [117.712389] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [117.712465] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [117.712540] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [117.712610] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [117.712680] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [117.712753] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [117.712829] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no
<7> [117.712904] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no
<7> [117.712980] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no
<7> [117.713054] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no
<7> [117.713129] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no
<7> [117.713204] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [modeset]
<7> [117.713309] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:271:plane 1C] fb: [NOFB], visible: no
<7> [117.713384] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:301:plane 2C] fb: [NOFB], visible: no
<7> [117.713460] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:331:plane 3C] fb: [NOFB], visible: no
<7> [117.713535] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:361:plane 4C] fb: [NOFB], visible: no
<7> [117.713604] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:371:plane 5C] fb: [NOFB], visible: no
<7> [117.713674] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:381:cursor C] fb: [NOFB], visible: no
<7> [117.713799] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [117.714652] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [117.714779] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [117.917657] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0
<7> [117.918385] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe C
<7> [117.924681] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off
<7> [117.925039] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [117.925149] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [117.925596] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [117.925586] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<7> [117.976585] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [117.977353] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x4, on? 1) for [CRTC:387:pipe C]
<7> [117.977359] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [117.977510] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [117.977887] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<7> [117.978308] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [117.978813] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [117.979383] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [117.979962] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]
<7> [117.980387] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]
<7> [117.980745] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]
<7> [117.981098] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]
<7> [117.981525] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]
<7> [117.981886] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]
<7> [117.982265] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]
<7> [117.982601] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]
<7> [117.982900] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]
<7> [117.983199] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]
<7> [117.983519] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]
<7> [117.983842] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]
<7> [117.984185] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]
<7> [117.985180] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [117.985792] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)
<7> [117.986095] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7> [117.986476] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [117.988354] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A]
<7> [117.988881] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [117.991126] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on
<7> [117.991469] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (486 ms remaining)
<7> [118.014247] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [118.014692] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [118.015088] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [118.015595] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [118.486292] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [118.595030] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [118.595641] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on
<7> [118.596060] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [118.631815] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [118.632158] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [118.632466] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [118.632839] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [118.803268] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [118.803920] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on
<7> [118.804485] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [118.808418] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [118.809877] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [118.810875] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7> [118.812285] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [118.813605] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [118.814956] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK
<7> [118.815496] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [118.817102] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [118.817580] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7> [118.818423] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [118.818959] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [118.819403] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7> [118.819912] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 13892
<7> [118.835846] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [118.837793] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [118.838278] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]
<7> [118.840961] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [118.841491] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [118.841977] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C]
<7> [118.843018] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [118.844288] [IGT] kms_plane_scaling: exiting, ret=0
<6> [118.853231] Console: switching to colour frame buffer device 180x56
<7> [118.903233] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [118.903785] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [118.904297] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
Created at 2026-01-13 04:26:42